diff options
-rw-r--r-- | drivers/phy/mediatek/phy-mtk-tphy.c | 40 |
1 files changed, 29 insertions, 11 deletions
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 731c483a04de..42a1174da6cc 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -27,7 +27,8 @@ #define SSUSB_SIFSLV_V1_U3PHYD 0x000 #define SSUSB_SIFSLV_V1_U3PHYA 0x200 -/* version V2 sub-banks offset base address */ +/* version V2/V3 sub-banks offset base address */ +/* V3: U2FREQ is not used anymore, but reserved */ /* u2 phy banks */ #define SSUSB_SIFSLV_V2_MISC 0x000 #define SSUSB_SIFSLV_V2_U2FREQ 0x100 @@ -270,6 +271,7 @@ enum mtk_phy_version { MTK_PHY_V1 = 1, MTK_PHY_V2, + MTK_PHY_V3, }; struct mtk_phy_pdata { @@ -330,6 +332,10 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, int fm_out; u32 tmp; + /* HW V3 doesn't support slew rate cal anymore */ + if (tphy->pdata->version == MTK_PHY_V3) + return; + /* use force value */ if (instance->eye_src) return; @@ -878,7 +884,7 @@ static void u2_phy_props_set(struct mtk_tphy *tphy, writel(tmp, com + U3P_U2PHYBC12C); } - if (instance->eye_src) { + if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src) { tmp = readl(com + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HSTX_SRCTRL; tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src); @@ -1042,11 +1048,15 @@ static struct phy *mtk_phy_xlate(struct device *dev, return ERR_PTR(-EINVAL); } - if (tphy->pdata->version == MTK_PHY_V1) { + switch (tphy->pdata->version) { + case MTK_PHY_V1: phy_v1_banks_init(tphy, instance); - } else if (tphy->pdata->version == MTK_PHY_V2) { + break; + case MTK_PHY_V2: + case MTK_PHY_V3: phy_v2_banks_init(tphy, instance); - } else { + break; + default: dev_err(dev, "phy version is not supported\n"); return ERR_PTR(-EINVAL); } @@ -1075,6 +1085,10 @@ static const struct mtk_phy_pdata tphy_v2_pdata = { .version = MTK_PHY_V2, }; +static const struct mtk_phy_pdata tphy_v3_pdata = { + .version = MTK_PHY_V3, +}; + static const struct mtk_phy_pdata mt8173_pdata = { .avoid_rx_sen_degradation = true, .version = MTK_PHY_V1, @@ -1086,6 +1100,7 @@ static const struct of_device_id mtk_tphy_id_table[] = { { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata }, { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata }, { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata }, + { .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata }, { }, }; MODULE_DEVICE_TABLE(of, mtk_tphy_id_table); @@ -1129,12 +1144,15 @@ static int mtk_tphy_probe(struct platform_device *pdev) } } - tphy->src_ref_clk = U3P_REF_CLK; - tphy->src_coef = U3P_SLEW_RATE_COEF; - /* update parameters of slew rate calibrate if exist */ - device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", - &tphy->src_ref_clk); - device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef); + if (tphy->pdata->version < MTK_PHY_V3) { + tphy->src_ref_clk = U3P_REF_CLK; + tphy->src_coef = U3P_SLEW_RATE_COEF; + /* update parameters of slew rate calibrate if exist */ + device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", + &tphy->src_ref_clk); + device_property_read_u32(dev, "mediatek,src-coef", + &tphy->src_coef); + } port = 0; for_each_child_of_node(np, child_np) { |