diff options
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.h | 44 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_utils.h | 153 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 108 |
3 files changed, 153 insertions, 152 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5f65c75594ef..d167053d6fce 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3357,50 +3357,6 @@ extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e, #define INTEL_BROADCAST_RGB_FULL 1 #define INTEL_BROADCAST_RGB_LIMITED 2 -static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) -{ - unsigned long j = msecs_to_jiffies(m); - - return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); -} - -static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) -{ - /* nsecs_to_jiffies64() does not guard against overflow */ - if (NSEC_PER_SEC % HZ && - div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ) - return MAX_JIFFY_OFFSET; - - return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1); -} - -/* - * If you need to wait X milliseconds between events A and B, but event B - * doesn't happen exactly after event A, you record the timestamp (jiffies) of - * when event A happened, then just before event B you call this function and - * pass the timestamp as the first argument, and X as the second argument. - */ -static inline void -wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms) -{ - unsigned long target_jiffies, tmp_jiffies, remaining_jiffies; - - /* - * Don't re-read the value of "jiffies" every time since it may change - * behind our back and break the math. - */ - tmp_jiffies = jiffies; - target_jiffies = timestamp_jiffies + - msecs_to_jiffies_timeout(to_wait_ms); - - if (time_after(target_jiffies, tmp_jiffies)) { - remaining_jiffies = target_jiffies - tmp_jiffies; - while (remaining_jiffies) - remaining_jiffies = - schedule_timeout_uninterruptible(remaining_jiffies); - } -} - void i915_memcpy_init_early(struct drm_i915_private *dev_priv); bool i915_memcpy_from_wc(void *dst, const void *src, unsigned long len); diff --git a/drivers/gpu/drm/i915/i915_utils.h b/drivers/gpu/drm/i915/i915_utils.h index 26117bf7da0c..c849cfa7cb28 100644 --- a/drivers/gpu/drm/i915/i915_utils.h +++ b/drivers/gpu/drm/i915/i915_utils.h @@ -26,6 +26,7 @@ #define __I915_UTILS_H #include <linux/list.h> +#include <linux/sched.h> #include <linux/types.h> #include <linux/workqueue.h> @@ -176,6 +177,158 @@ static inline void drain_delayed_work(struct delayed_work *dw) } while (delayed_work_pending(dw)); } +static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) +{ + unsigned long j = msecs_to_jiffies(m); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + +static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) +{ + /* nsecs_to_jiffies64() does not guard against overflow */ + if (NSEC_PER_SEC % HZ && + div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ) + return MAX_JIFFY_OFFSET; + + return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1); +} + +/* + * If you need to wait X milliseconds between events A and B, but event B + * doesn't happen exactly after event A, you record the timestamp (jiffies) of + * when event A happened, then just before event B you call this function and + * pass the timestamp as the first argument, and X as the second argument. + */ +static inline void +wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms) +{ + unsigned long target_jiffies, tmp_jiffies, remaining_jiffies; + + /* + * Don't re-read the value of "jiffies" every time since it may change + * behind our back and break the math. + */ + tmp_jiffies = jiffies; + target_jiffies = timestamp_jiffies + + msecs_to_jiffies_timeout(to_wait_ms); + + if (time_after(target_jiffies, tmp_jiffies)) { + remaining_jiffies = target_jiffies - tmp_jiffies; + while (remaining_jiffies) + remaining_jiffies = + schedule_timeout_uninterruptible(remaining_jiffies); + } +} + +/** + * __wait_for - magic wait macro + * + * Macro to help avoid open coding check/wait/timeout patterns. Note that it's + * important that we check the condition again after having timed out, since the + * timeout could be due to preemption or similar and we've never had a chance to + * check the condition before the timeout. + */ +#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ + const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \ + long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \ + int ret__; \ + might_sleep(); \ + for (;;) { \ + const bool expired__ = ktime_after(ktime_get_raw(), end__); \ + OP; \ + /* Guarantee COND check prior to timeout */ \ + barrier(); \ + if (COND) { \ + ret__ = 0; \ + break; \ + } \ + if (expired__) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + usleep_range(wait__, wait__ * 2); \ + if (wait__ < (Wmax)) \ + wait__ <<= 1; \ + } \ + ret__; \ +}) + +#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \ + (Wmax)) +#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000) + +/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */ +#if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT) +# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic()) +#else +# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0) +#endif + +#define _wait_for_atomic(COND, US, ATOMIC) \ +({ \ + int cpu, ret, timeout = (US) * 1000; \ + u64 base; \ + _WAIT_FOR_ATOMIC_CHECK(ATOMIC); \ + if (!(ATOMIC)) { \ + preempt_disable(); \ + cpu = smp_processor_id(); \ + } \ + base = local_clock(); \ + for (;;) { \ + u64 now = local_clock(); \ + if (!(ATOMIC)) \ + preempt_enable(); \ + /* Guarantee COND check prior to timeout */ \ + barrier(); \ + if (COND) { \ + ret = 0; \ + break; \ + } \ + if (now - base >= timeout) { \ + ret = -ETIMEDOUT; \ + break; \ + } \ + cpu_relax(); \ + if (!(ATOMIC)) { \ + preempt_disable(); \ + if (unlikely(cpu != smp_processor_id())) { \ + timeout -= now - base; \ + cpu = smp_processor_id(); \ + base = local_clock(); \ + } \ + } \ + } \ + ret; \ +}) + +#define wait_for_us(COND, US) \ +({ \ + int ret__; \ + BUILD_BUG_ON(!__builtin_constant_p(US)); \ + if ((US) > 10) \ + ret__ = _wait_for((COND), (US), 10, 10); \ + else \ + ret__ = _wait_for_atomic((COND), (US), 0); \ + ret__; \ +}) + +#define wait_for_atomic_us(COND, US) \ +({ \ + BUILD_BUG_ON(!__builtin_constant_p(US)); \ + BUILD_BUG_ON((US) > 50000); \ + _wait_for_atomic((COND), (US), 1); \ +}) + +#define wait_for_atomic(COND, MS) wait_for_atomic_us((COND), (MS) * 1000) + +#define KHz(x) (1000 * (x)) +#define MHz(x) KHz(1000 * (x)) + +#define KBps(x) (1000 * (x)) +#define MBps(x) KBps(1000 * (x)) +#define GBps(x) ((u64)1000 * MBps((x))) + static inline const char *yesno(bool v) { return v ? "yes" : "no"; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index addf6f92a9db..4049e03d2c0d 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -46,114 +46,6 @@ struct drm_printer; -/** - * __wait_for - magic wait macro - * - * Macro to help avoid open coding check/wait/timeout patterns. Note that it's - * important that we check the condition again after having timed out, since the - * timeout could be due to preemption or similar and we've never had a chance to - * check the condition before the timeout. - */ -#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ - const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \ - long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \ - int ret__; \ - might_sleep(); \ - for (;;) { \ - const bool expired__ = ktime_after(ktime_get_raw(), end__); \ - OP; \ - /* Guarantee COND check prior to timeout */ \ - barrier(); \ - if (COND) { \ - ret__ = 0; \ - break; \ - } \ - if (expired__) { \ - ret__ = -ETIMEDOUT; \ - break; \ - } \ - usleep_range(wait__, wait__ * 2); \ - if (wait__ < (Wmax)) \ - wait__ <<= 1; \ - } \ - ret__; \ -}) - -#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \ - (Wmax)) -#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000) - -/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */ -#if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT) -# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic()) -#else -# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0) -#endif - -#define _wait_for_atomic(COND, US, ATOMIC) \ -({ \ - int cpu, ret, timeout = (US) * 1000; \ - u64 base; \ - _WAIT_FOR_ATOMIC_CHECK(ATOMIC); \ - if (!(ATOMIC)) { \ - preempt_disable(); \ - cpu = smp_processor_id(); \ - } \ - base = local_clock(); \ - for (;;) { \ - u64 now = local_clock(); \ - if (!(ATOMIC)) \ - preempt_enable(); \ - /* Guarantee COND check prior to timeout */ \ - barrier(); \ - if (COND) { \ - ret = 0; \ - break; \ - } \ - if (now - base >= timeout) { \ - ret = -ETIMEDOUT; \ - break; \ - } \ - cpu_relax(); \ - if (!(ATOMIC)) { \ - preempt_disable(); \ - if (unlikely(cpu != smp_processor_id())) { \ - timeout -= now - base; \ - cpu = smp_processor_id(); \ - base = local_clock(); \ - } \ - } \ - } \ - ret; \ -}) - -#define wait_for_us(COND, US) \ -({ \ - int ret__; \ - BUILD_BUG_ON(!__builtin_constant_p(US)); \ - if ((US) > 10) \ - ret__ = _wait_for((COND), (US), 10, 10); \ - else \ - ret__ = _wait_for_atomic((COND), (US), 0); \ - ret__; \ -}) - -#define wait_for_atomic_us(COND, US) \ -({ \ - BUILD_BUG_ON(!__builtin_constant_p(US)); \ - BUILD_BUG_ON((US) > 50000); \ - _wait_for_atomic((COND), (US), 1); \ -}) - -#define wait_for_atomic(COND, MS) wait_for_atomic_us((COND), (MS) * 1000) - -#define KHz(x) (1000 * (x)) -#define MHz(x) KHz(1000 * (x)) - -#define KBps(x) (1000 * (x)) -#define MBps(x) KBps(1000 * (x)) -#define GBps(x) ((u64)1000 * MBps((x))) - /* * Display related stuff */ |