diff options
50 files changed, 4118 insertions, 1429 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 859501366777..a9ce63cfbe87 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -380,13 +380,17 @@ Description: algorithm to adjust the charge rate dynamically, without any user configuration required. "Custom" means that the charger uses the charge_control_* properties as configuration for some - different algorithm. + different algorithm. "Long Life" means the charger reduces its + charging rate in order to prolong the battery health. "Bypass" + means the charger bypasses the charging path around the + integrated converter allowing for a "smart" wall adaptor to + perform the power conversion externally. Access: Read, Write Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard", - "Adaptive", "Custom" + "Adaptive", "Custom", "Long Life", "Bypass" What: /sys/class/power_supply/<supply_name>/charge_term_current Date: July 2014 diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml index 54ac42a9d354..2ce408a7c0ae 100644 --- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml @@ -25,6 +25,11 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle deprecated: true + line-impedance-micro-ohms: + description: The line impedance between the battery and the + AB8500 inputs, to compensate for this when determining internal + resistance. + interrupts: maxItems: 5 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index da929cb08463..e68b1f991da9 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -143,6 +143,14 @@ properties: - infineon,xdpe12254 # Infineon Multi-phase Digital VR Controller xdpe12284 - infineon,xdpe12284 + # Injoinic IP5108 2.0A Power Bank IC with I2C + - injoinic,ip5108 + # Injoinic IP5109 2.1A Power Bank IC with I2C + - injoinic,ip5109 + # Injoinic IP5207 1.2A Power Bank IC with I2C + - injoinic,ip5207 + # Injoinic IP5209 2.4A Power Bank IC with I2C + - injoinic,ip5209 # Inspur Power System power supply unit version 1 - inspur,ipsps1 # Intersil ISL29028 Ambient Light and Proximity Sensor diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index baed2b007d0e..9968205957ff 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -571,6 +571,8 @@ patternProperties: description: InfoVision Optoelectronics Kunshan Co. Ltd. "^ingenic,.*": description: Ingenic Semiconductor + "^injoinic,.*": + description: Injoinic Technology Corp. "^innolux,.*": description: Innolux Corporation "^inside-secure,.*": diff --git a/MAINTAINERS b/MAINTAINERS index b8d749f0de8a..cc5d4cd980b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9537,6 +9537,11 @@ F: include/linux/mfd/ingenic-tcu.h F: sound/soc/codecs/jz47* F: sound/soc/jz4740/ +INJOINIC IP5xxx POWER BANK IC DRIVER +M: Samuel Holland <samuel@sholland.org> +S: Maintained +F: drivers/power/supply/ip5xxx_power.c + INOTIFY M: Jan Kara <jack@suse.cz> R: Amir Goldstein <amir73il@gmail.com> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index aab87c9b35c8..0d42e49105dd 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -61,6 +61,8 @@ config EXTCON_INTEL_INT3496 config EXTCON_INTEL_CHT_WC tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver" depends on INTEL_SOC_PMIC_CHTWC + depends on USB_SUPPORT + select USB_ROLE_SWITCH help Say Y here to enable extcon support for charger detection / control on the Intel Cherrytrail Whiskey Cove PMIC. diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c index 771f6f4cf92e..89a6449e3f4a 100644 --- a/drivers/extcon/extcon-intel-cht-wc.c +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -14,8 +14,12 @@ #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/property.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> +#include <linux/usb/role.h> #include "extcon-intel.h" @@ -101,8 +105,13 @@ struct cht_wc_extcon_data { struct device *dev; struct regmap *regmap; struct extcon_dev *edev; + struct usb_role_switch *role_sw; + struct regulator *vbus_boost; + struct power_supply *psy; + enum power_supply_usb_type usb_type; unsigned int previous_cable; bool usb_host; + bool vbus_boost_enabled; }; static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) @@ -112,13 +121,21 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) return INTEL_USB_ID_GND; case CHT_WC_PWRSRC_RID_FLOAT: return INTEL_USB_ID_FLOAT; + /* + * According to the spec. we should read the USB-ID pin ADC value here + * to determine the resistance of the used pull-down resister and then + * return RID_A / RID_B / RID_C based on this. But all "Accessory + * Charger Adapter"s (ACAs) which users can actually buy always use + * a combination of a charging port with one or more USB-A ports, so + * they should always use a resistor indicating RID_A. But the spec + * is hard to read / badly-worded so some of them actually indicate + * they are a RID_B ACA evnen though they clearly are a RID_A ACA. + * To workaround this simply always return INTEL_USB_RID_A, which + * matches all the ACAs which users can actually buy. + */ case CHT_WC_PWRSRC_RID_ACA: + return INTEL_USB_RID_A; default: - /* - * Once we have IIO support for the GPADC we should read - * the USBID GPADC channel here and determine ACA role - * based on that. - */ return INTEL_USB_ID_FLOAT; } } @@ -147,14 +164,15 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext, } while (time_before(jiffies, timeout)); if (status != CHT_WC_USBSRC_STS_SUCCESS) { - if (ignore_errors) - return EXTCON_CHG_USB_SDP; /* Save fallback */ + if (!ignore_errors) { + if (status == CHT_WC_USBSRC_STS_FAIL) + dev_warn(ext->dev, "Could not detect charger type\n"); + else + dev_warn(ext->dev, "Timeout detecting charger type\n"); + } - if (status == CHT_WC_USBSRC_STS_FAIL) - dev_warn(ext->dev, "Could not detect charger type\n"); - else - dev_warn(ext->dev, "Timeout detecting charger type\n"); - return EXTCON_CHG_USB_SDP; /* Save fallback */ + /* Safe fallback */ + usbsrc = CHT_WC_USBSRC_TYPE_SDP << CHT_WC_USBSRC_TYPE_SHIFT; } usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT; @@ -163,18 +181,23 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext, dev_warn(ext->dev, "Unhandled charger type %d, defaulting to SDP\n", ret); + ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP; return EXTCON_CHG_USB_SDP; case CHT_WC_USBSRC_TYPE_SDP: case CHT_WC_USBSRC_TYPE_FLOATING: case CHT_WC_USBSRC_TYPE_OTHER: + ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP; return EXTCON_CHG_USB_SDP; case CHT_WC_USBSRC_TYPE_CDP: + ext->usb_type = POWER_SUPPLY_USB_TYPE_CDP; return EXTCON_CHG_USB_CDP; case CHT_WC_USBSRC_TYPE_DCP: case CHT_WC_USBSRC_TYPE_DCP_EXTPHY: case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */ + ext->usb_type = POWER_SUPPLY_USB_TYPE_DCP; return EXTCON_CHG_USB_DCP; case CHT_WC_USBSRC_TYPE_ACA: + ext->usb_type = POWER_SUPPLY_USB_TYPE_ACA; return EXTCON_CHG_USB_ACA; } } @@ -216,6 +239,18 @@ static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext, CHT_WC_CHGRCTRL1_OTGMODE, val); if (ret) dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret); + + if (ext->vbus_boost && ext->vbus_boost_enabled != enable) { + if (enable) + ret = regulator_enable(ext->vbus_boost); + else + ret = regulator_disable(ext->vbus_boost); + + if (ret) + dev_err(ext->dev, "Error updating Vbus boost regulator: %d\n", ret); + else + ext->vbus_boost_enabled = enable; + } } static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext, @@ -245,6 +280,9 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) unsigned int cable = EXTCON_NONE; /* Ignore errors in host mode, as the 5v boost converter is on then */ bool ignore_get_charger_errors = ext->usb_host; + enum usb_role role; + + ext->usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN; ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); if (ret) { @@ -288,6 +326,21 @@ set_state: ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A)); extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host); + + if (ext->usb_host) + role = USB_ROLE_HOST; + else if (pwrsrc_sts & CHT_WC_PWRSRC_VBUS) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_NONE; + + /* Note: this is a no-op when ext->role_sw is NULL */ + ret = usb_role_switch_set_role(ext->role_sw, role); + if (ret) + dev_err(ext->dev, "Error setting USB-role: %d\n", ret); + + if (ext->psy) + power_supply_changed(ext->psy); } static irqreturn_t cht_wc_extcon_isr(int irq, void *data) @@ -333,6 +386,114 @@ static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable) return ret; } +static int cht_wc_extcon_find_role_sw(struct cht_wc_extcon_data *ext) +{ + const struct software_node *swnode; + struct fwnode_handle *fwnode; + + swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); + if (!swnode) + return -EPROBE_DEFER; + + fwnode = software_node_fwnode(swnode); + ext->role_sw = usb_role_switch_find_by_fwnode(fwnode); + fwnode_handle_put(fwnode); + + return ext->role_sw ? 0 : -EPROBE_DEFER; +} + +static void cht_wc_extcon_put_role_sw(void *data) +{ + struct cht_wc_extcon_data *ext = data; + + usb_role_switch_put(ext->role_sw); +} + +/* Some boards require controlling the role-sw and Vbus based on the id-pin */ +static int cht_wc_extcon_get_role_sw_and_regulator(struct cht_wc_extcon_data *ext) +{ + int ret; + + ret = cht_wc_extcon_find_role_sw(ext); + if (ret) + return ret; + + ret = devm_add_action_or_reset(ext->dev, cht_wc_extcon_put_role_sw, ext); + if (ret) + return ret; + + /* + * On x86/ACPI platforms the regulator <-> consumer link is provided + * by platform_data passed to the regulator driver. This means that + * this info is not available before the regulator driver has bound. + * Use devm_regulator_get_optional() to avoid getting a dummy + * regulator and wait for the regulator to show up if necessary. + */ + ext->vbus_boost = devm_regulator_get_optional(ext->dev, "vbus"); + if (IS_ERR(ext->vbus_boost)) { + ret = PTR_ERR(ext->vbus_boost); + if (ret == -ENODEV) + ret = -EPROBE_DEFER; + + return dev_err_probe(ext->dev, ret, "getting Vbus regulator"); + } + + return 0; +} + +static int cht_wc_extcon_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct cht_wc_extcon_data *ext = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = ext->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ext->usb_type ? 1 : 0; + break; + default: + return -EINVAL; + } + + return 0; +} + +static const enum power_supply_usb_type cht_wc_extcon_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_SDP, + POWER_SUPPLY_USB_TYPE_CDP, + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_ACA, + POWER_SUPPLY_USB_TYPE_UNKNOWN, +}; + +static const enum power_supply_property cht_wc_extcon_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc cht_wc_extcon_psy_desc = { + .name = "cht_wcove_pwrsrc", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = cht_wc_extcon_psy_usb_types, + .num_usb_types = ARRAY_SIZE(cht_wc_extcon_psy_usb_types), + .properties = cht_wc_extcon_psy_props, + .num_properties = ARRAY_SIZE(cht_wc_extcon_psy_props), + .get_property = cht_wc_extcon_psy_get_prop, +}; + +static int cht_wc_extcon_register_psy(struct cht_wc_extcon_data *ext) +{ + struct power_supply_config psy_cfg = { .drv_data = ext }; + + ext->psy = devm_power_supply_register(ext->dev, + &cht_wc_extcon_psy_desc, + &psy_cfg); + return PTR_ERR_OR_ZERO(ext->psy); +} + static int cht_wc_extcon_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); @@ -358,20 +519,47 @@ static int cht_wc_extcon_probe(struct platform_device *pdev) if (IS_ERR(ext->edev)) return PTR_ERR(ext->edev); - /* - * When a host-cable is detected the BIOS enables an external 5v boost - * converter to power connected devices there are 2 problems with this: - * 1) This gets seen by the external battery charger as a valid Vbus - * supply and it then tries to feed Vsys from this creating a - * feedback loop which causes aprox. 300 mA extra battery drain - * (and unless we drive the external-charger-disable pin high it - * also tries to charge the battery causing even more feedback). - * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply - * Since the external battery charger has its own 5v boost converter - * which does not have these issues, we simply turn the separate - * external 5v boost converter off and leave it off entirely. - */ - cht_wc_extcon_set_5v_boost(ext, false); + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + /* + * When a host-cable is detected the BIOS enables an external 5v boost + * converter to power connected devices there are 2 problems with this: + * 1) This gets seen by the external battery charger as a valid Vbus + * supply and it then tries to feed Vsys from this creating a + * feedback loop which causes aprox. 300 mA extra battery drain + * (and unless we drive the external-charger-disable pin high it + * also tries to charge the battery causing even more feedback). + * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply + * Since the external battery charger has its own 5v boost converter + * which does not have these issues, we simply turn the separate + * external 5v boost converter off and leave it off entirely. + */ + cht_wc_extcon_set_5v_boost(ext, false); + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + /* Do this first, as it may very well return -EPROBE_DEFER. */ + ret = cht_wc_extcon_get_role_sw_and_regulator(ext); + if (ret) + return ret; + /* + * The bq25890 used here relies on this driver's BC-1.2 charger + * detection, and the bq25890 driver expect this info to be + * available through a parent power_supply class device which + * models the detected charger (idem to how the Type-C TCPM code + * registers a power_supply classdev for the connected charger). + */ + ret = cht_wc_extcon_register_psy(ext); + if (ret) + return ret; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + ret = cht_wc_extcon_get_role_sw_and_regulator(ext); + if (ret) + return ret; + break; + default: + break; + } /* Enable sw control */ ret = cht_wc_extcon_sw_control(ext, true); diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 1cf68f85b2e1..54e909f9eab6 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power/bq24190_charger.h> +#include <linux/power/bq25890_charger.h> #include <linux/slab.h> #define CHT_WC_I2C_CTRL 0x5e24 @@ -270,6 +271,7 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; +/********** GPD Win / Pocket charger IC settings **********/ static const char * const bq24190_suppliers[] = { "tcpm-source-psy-i2c-fusb302" }; @@ -304,17 +306,92 @@ static struct bq24190_platform_data bq24190_pdata = { .regulator_init_data = &bq24190_vbus_init_data, }; +static struct i2c_board_info gpd_win_board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, +}; + +/********** Xiaomi Mi Pad 2 charger IC settings **********/ +static struct regulator_consumer_supply bq2589x_vbus_consumer = { + .supply = "vbus", + .dev_name = "cht_wcove_pwrsrc", +}; + +static const struct regulator_init_data bq2589x_vbus_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &bq2589x_vbus_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq25890_platform_data bq2589x_pdata = { + .regulator_init_data = &bq2589x_vbus_init_data, +}; + +static const struct property_entry xiaomi_mipad2_props[] = { + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + PROPERTY_ENTRY_BOOL("linux,read-back-settings"), + { } +}; + +static const struct software_node xiaomi_mipad2_node = { + .properties = xiaomi_mipad2_props, +}; + +static struct i2c_board_info xiaomi_mipad2_board_info = { + .type = "bq25890", + .addr = 0x6a, + .dev_name = "bq25890", + .swnode = &xiaomi_mipad2_node, + .platform_data = &bq2589x_pdata, +}; + +/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/ +static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" }; + +static const struct property_entry lenovo_yb1_bq25892_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", + lenovo_yb1_bq25892_suppliers), + PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* + * The firmware sets everything to the defaults, which leads to a + * somewhat low charge-current of 2048mA and worse to a battery-voltage + * of 4.2V instead of 4.35V (when booted without a charger connected). + * Use our own values instead of "linux,read-back-settings" to fix this. + */ + PROPERTY_ENTRY_U32("ti,charge-current", 4224000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 256000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yb1_bq25892_node = { + .properties = lenovo_yb1_bq25892_props, +}; + +static struct i2c_board_info lenovo_yogabook1_board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892", + .swnode = &lenovo_yb1_bq25892_node, + .platform_data = &bq2589x_pdata, +}; + static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct i2c_board_info *board_info = NULL; struct cht_wc_i2c_adap *adap; - struct i2c_board_info board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24190", - .swnode = &bq24190_node, - .platform_data = &bq24190_pdata, - }; int ret, reg, irq; irq = platform_get_irq(pdev, 0); @@ -379,17 +456,24 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) if (ret) goto remove_irq_domain; - /* - * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, - * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 - * USB Type-C controller connected to another i2c bus. In this setup - * the max17047 and fusb302 devices are enumerated through an INT33FE - * ACPI device. If this device is present register an i2c-client for - * the TI bq24292i charger. - */ - if (acpi_dev_present("INT33FE", NULL, -1)) { - board_info.irq = adap->client_irq; - adap->client = i2c_new_client_device(&adap->adapter, &board_info); + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + board_info = &gpd_win_board_info; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + board_info = &xiaomi_mipad2_board_info; + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + board_info = &lenovo_yogabook1_board_info; + break; + default: + dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n"); + break; + } + + if (board_info) { + board_info->irq = adap->client_irq; + adap->client = i2c_new_client_device(&adap->adapter, board_info); if (IS_ERR(adap->client)) { ret = PTR_ERR(adap->client); goto del_adapter; diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c index 49c5f71664bc..4eab191e053a 100644 --- a/drivers/mfd/intel_soc_pmic_chtwc.c +++ b/drivers/mfd/intel_soc_pmic_chtwc.c @@ -10,6 +10,7 @@ #include <linux/acpi.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -134,9 +135,44 @@ static const struct regmap_irq_chip cht_wc_regmap_irq_chip = { .num_regs = 1, }; +static const struct dmi_system_id cht_wc_model_dmi_ids[] = { + { + /* GPD win / GPD pocket mini laptops */ + .driver_data = (void *)(long)INTEL_CHT_WC_GPD_WIN_POCKET, + /* + * This DMI match may not seem unique, but it is. In the 67000+ + * DMI decode dumps from linux-hardware.org only 116 have + * board_vendor set to "AMI Corporation" and of those 116 only + * the GPD win's and pocket's board_name is "Default string". + */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"), + }, + }, { + /* Xiaomi Mi Pad 2 */ + .driver_data = (void *)(long)INTEL_CHT_WC_XIAOMI_MIPAD2, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), + DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), + }, + }, { + /* Lenovo Yoga Book X90F / X91F / X91L */ + .driver_data = (void *)(long)INTEL_CHT_WC_LENOVO_YOGABOOK1, + .matches = { + /* Non exact match to match all versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"), + }, + }, + { } +}; + static int cht_wc_probe(struct i2c_client *client) { struct device *dev = &client->dev; + const struct dmi_system_id *id; struct intel_soc_pmic *pmic; acpi_status status; unsigned long long hrv; @@ -160,6 +196,10 @@ static int cht_wc_probe(struct i2c_client *client) if (!pmic) return -ENOMEM; + id = dmi_first_match(cht_wc_model_dmi_ids); + if (id) + pmic->cht_wc_model = (long)id->driver_data; + pmic->irq = client->irq; pmic->dev = dev; i2c_set_clientdata(client, pmic); diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c index 90e35c07240a..b7f7a8225f22 100644 --- a/drivers/power/reset/gemini-poweroff.c +++ b/drivers/power/reset/gemini-poweroff.c @@ -107,8 +107,8 @@ static int gemini_poweroff_probe(struct platform_device *pdev) return PTR_ERR(gpw->base); irq = platform_get_irq(pdev, 0); - if (!irq) - return -EINVAL; + if (irq < 0) + return irq; gpw->dev = dev; diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index b366e2fd8e97..1aa8323ad9f6 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -51,6 +51,14 @@ config GENERIC_ADC_BATTERY Say Y here to enable support for the generic battery driver which uses IIO framework to read adc. +config IP5XXX_POWER + tristate "Injoinic IP5xxx power bank IC driver" + depends on I2C + select REGMAP_I2C + help + Say Y to include support for Injoinic IP5xxx power bank ICs, + which include a battery charger and a boost converter. + config MAX8925_POWER tristate "MAX8925 battery charger support" depends on MFD_MAX8925 @@ -181,6 +189,12 @@ config BATTERY_OLPC help Say Y to enable support for the battery on the OLPC laptop. +config BATTERY_SAMSUNG_SDI + bool "Samsung SDI batteries" + help + Say Y to enable support for Samsung SDI battery data. + These batteries are used in Samsung mobile phones. + config BATTERY_TOSA tristate "Sharp SL-6000 (tosa) battery" depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX @@ -351,14 +365,14 @@ config AXP20X_POWER config AXP288_CHARGER tristate "X-Powers AXP288 Charger" - depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI + depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI && ACPI help Say yes here to have support X-Power AXP288 power management IC (PMIC) integrated charger. config AXP288_FUEL_GAUGE tristate "X-Powers AXP288 Fuel Gauge" - depends on MFD_AXP20X && IIO && IOSF_MBI + depends on MFD_AXP20X && IIO && IOSF_MBI && ACPI help Say yes here to have support for X-Power power management IC (PMIC) Fuel Gauge. The device provides battery statistics and status @@ -728,6 +742,8 @@ config BATTERY_GAUGE_LTC2941 config AB8500_BM bool "AB8500 Battery Management Driver" depends on AB8500_CORE && AB8500_GPADC && (IIO = y) && OF + select THERMAL + select THERMAL_OF help Say Y to include support for AB8500 battery management. @@ -866,4 +882,19 @@ config CHARGER_SURFACE Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3, Surface Book 3, and Surface Laptop Go. +config BATTERY_UG3105 + tristate "uPI uG3105 battery monitor driver" + depends on I2C + help + Battery monitor driver for the uPI uG3105 battery monitor. + + Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead + it is expected to be use in combination with some always on + microcontroller reading its coulomb-counter before it can wrap + (it must be read every 400 seconds!). + + Since Linux does not monitor coulomb-counter changes while the + device is off or suspended, the functionality of this driver is + limited to reporting capacity only. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 2c1b264b2046..7f02f36aea55 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o +obj-$(CONFIG_IP5XXX_POWER) += ip5xxx_power.o obj-$(CONFIG_MAX8925_POWER) += max8925_power.o obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o obj-$(CONFIG_WM831X_POWER) += wm831x_power.o @@ -34,6 +35,7 @@ obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o +obj-$(CONFIG_BATTERY_SAMSUNG_SDI) += samsung-sdi-battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_INGENIC) += ingenic-battery.o @@ -105,3 +107,4 @@ obj-$(CONFIG_RN5T618_POWER) += rn5t618_power.o obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o +obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o diff --git a/drivers/power/supply/ab8500-bm.h b/drivers/power/supply/ab8500-bm.h index 56a5aaf9a27a..180a016b3662 100644 --- a/drivers/power/supply/ab8500-bm.h +++ b/drivers/power/supply/ab8500-bm.h @@ -260,30 +260,6 @@ enum bup_vch_sel { #define BUS_PP_PRECHG_CURRENT_MASK 0x0E #define BUS_POWER_PATH_PRECHG_ENA 0x01 -/* - * ADC for the battery thermistor. - * When using the AB8500_ADC_THERM_BATCTRL the battery ID resistor is combined - * with a NTC resistor to both identify the battery and to measure its - * temperature. Different phone manufactures uses different techniques to both - * identify the battery and to read its temperature. - */ -enum ab8500_adc_therm { - AB8500_ADC_THERM_BATCTRL, - AB8500_ADC_THERM_BATTEMP, -}; - -/** - * struct ab8500_res_to_temp - defines one point in a temp to res curve. To - * be used in battery packs that combines the identification resistor with a - * NTC resistor. - * @temp: battery pack temperature in Celsius - * @resist: NTC resistor net total resistance - */ -struct ab8500_res_to_temp { - int temp; - int resist; -}; - /* Forward declaration */ struct ab8500_fg; @@ -352,36 +328,6 @@ struct ab8500_maxim_parameters { }; /** - * struct ab8500_battery_type - different batteries supported - * @resis_high: battery upper resistance limit - * @resis_low: battery lower resistance limit - * @maint_a_cur_lvl: charger current in maintenance A state in mA - * @maint_a_vol_lvl: charger voltage in maintenance A state in mV - * @maint_a_chg_timer_h: charge time in maintenance A state - * @maint_b_cur_lvl: charger current in maintenance B state in mA - * @maint_b_vol_lvl: charger voltage in maintenance B state in mV - * @maint_b_chg_timer_h: charge time in maintenance B state - * @low_high_cur_lvl: charger current in temp low/high state in mA - * @low_high_vol_lvl: charger voltage in temp low/high state in mV' - * @n_r_t_tbl_elements: number of elements in r_to_t_tbl - * @r_to_t_tbl: table containing resistance to temp points - */ -struct ab8500_battery_type { - int resis_high; - int resis_low; - int maint_a_cur_lvl; - int maint_a_vol_lvl; - int maint_a_chg_timer_h; - int maint_b_cur_lvl; - int maint_b_vol_lvl; - int maint_b_chg_timer_h; - int low_high_cur_lvl; - int low_high_vol_lvl; - int n_temp_tbl_elements; - const struct ab8500_res_to_temp *r_to_t_tbl; -}; - -/** * struct ab8500_bm_capacity_levels - ab8500 capacity level data * @critical: critical capacity level in percent * @low: low capacity level in percent @@ -421,9 +367,7 @@ struct ab8500_bm_charger_parameters { * @usb_safety_tmr_h safety timer for usb charger * @bkup_bat_v voltage which we charge the backup battery with * @bkup_bat_i current which we charge the backup battery with - * @no_maintenance indicates that maintenance charging is disabled * @capacity_scaling indicates whether capacity scaling is to be used - * @ab8500_adc_therm placement of thermistor, batctrl or battemp adc * @chg_unknown_bat flag to enable charging of unknown batteries * @enable_overshoot flag to enable VBAT overshoot control * @auto_trig flag to enable auto adc trigger @@ -431,10 +375,8 @@ struct ab8500_bm_charger_parameters { * @interval_charging charge alg cycle period time when charging (sec) * @interval_not_charging charge alg cycle period time when not charging (sec) * @temp_hysteresis temperature hysteresis - * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) * @maxi maximization parameters * @cap_levels capacity in percent for the different capacity levels - * @bat_type table of supported battery types * @chg_params charger parameters * @fg_params fuel gauge parameters */ @@ -447,41 +389,20 @@ struct ab8500_bm_data { int usb_safety_tmr_h; int bkup_bat_v; int bkup_bat_i; - bool no_maintenance; bool capacity_scaling; bool chg_unknown_bat; bool enable_overshoot; bool auto_trig; - enum ab8500_adc_therm adc_therm; int fg_res; int interval_charging; int interval_not_charging; int temp_hysteresis; - int gnd_lift_resistance; const struct ab8500_maxim_parameters *maxi; const struct ab8500_bm_capacity_levels *cap_levels; - struct ab8500_battery_type *bat_type; const struct ab8500_bm_charger_parameters *chg_params; const struct ab8500_fg_parameters *fg_params; }; -enum { - NTC_EXTERNAL = 0, - NTC_INTERNAL, -}; - -/** - * struct res_to_temp - defines one point in a temp to res curve. To - * be used in battery packs that combines the identification resistor with a - * NTC resistor. - * @temp: battery pack temperature in Celsius - * @resist: NTC resistor net total resistance - */ -struct res_to_temp { - int temp; - int resist; -}; - /* Forward declaration */ struct ab8500_fg; diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c index 7ae95f537580..3e6ea22372b2 100644 --- a/drivers/power/supply/ab8500_bmdata.c +++ b/drivers/power/supply/ab8500_bmdata.c @@ -44,28 +44,6 @@ static struct power_supply_battery_ocv_table ocv_cap_tbl[] = { }; /* - * Note that the res_to_temp table must be strictly sorted by falling - * resistance values to work. - */ -static const struct ab8500_res_to_temp temp_tbl[] = { - {-5, 214834}, - { 0, 162943}, - { 5, 124820}, - {10, 96520}, - {15, 75306}, - {20, 59254}, - {25, 47000}, - {30, 37566}, - {35, 30245}, - {40, 24520}, - {45, 20010}, - {50, 16432}, - {55, 13576}, - {60, 11280}, - {65, 9425}, -}; - -/* * Note that the batres_vs_temp table must be strictly sorted by falling * temperature values to work. Factory resistance is 300 mOhm and the * resistance values to the right are percentages of 300 mOhm. @@ -80,20 +58,19 @@ static struct power_supply_resistance_temp_table temp_to_batres_tbl_thermistor[] { .temp = -20, .resistance = 198 /* 595 mOhm */ }, }; -/* Default battery type for reference designs is the unknown type */ -static struct ab8500_battery_type bat_type_thermistor_unknown = { - .resis_high = 0, - .resis_low = 0, - .maint_a_cur_lvl = 400, - .maint_a_vol_lvl = 4050, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 400, - .maint_b_vol_lvl = 4000, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, +static struct power_supply_maintenance_charge_table ab8500_maint_charg_table[] = { + { + /* Maintenance charging phase A, 60 hours */ + .charge_current_max_ua = 400000, + .charge_voltage_max_uv = 4050000, + .charge_safety_timer_minutes = 60*60, + }, + { + /* Maintenance charging phase B, 200 hours */ + .charge_current_max_ua = 400000, + .charge_voltage_max_uv = 4000000, + .charge_safety_timer_minutes = 200*60, + } }; static const struct ab8500_bm_capacity_levels cap_levels = { @@ -148,17 +125,13 @@ struct ab8500_bm_data ab8500_bm_data = { .usb_safety_tmr_h = 4, .bkup_bat_v = BUP_VCH_SEL_2P6V, .bkup_bat_i = BUP_ICH_SEL_150UA, - .no_maintenance = false, .capacity_scaling = false, - .adc_therm = AB8500_ADC_THERM_BATCTRL, .chg_unknown_bat = false, .enable_overshoot = false, .fg_res = 100, .cap_levels = &cap_levels, - .bat_type = &bat_type_thermistor_unknown, .interval_charging = 5, .interval_not_charging = 120, - .gnd_lift_resistance = 34, .maxi = &ab8500_maxi_params, .chg_params = &chg, .fg_params = &fg, @@ -188,13 +161,11 @@ int ab8500_bm_of_probe(struct power_supply *psy, * fall back to safe defaults. */ if ((bi->voltage_min_design_uv < 0) || - (bi->voltage_max_design_uv < 0) || - (bi->overvoltage_limit_uv < 0)) { + (bi->voltage_max_design_uv < 0)) { /* Nominal voltage is 3.7V for unknown batteries */ bi->voltage_min_design_uv = 3700000; - bi->voltage_max_design_uv = 3700000; - /* Termination voltage (overcharge limit) 4.05V */ - bi->overvoltage_limit_uv = 4050000; + /* Termination voltage 4.05V */ + bi->voltage_max_design_uv = 4050000; } if (bi->constant_charge_current_max_ua < 0) @@ -207,6 +178,24 @@ int ab8500_bm_of_probe(struct power_supply *psy, /* Charging stops when we drop below this current */ bi->charge_term_current_ua = 200000; + if (!bi->maintenance_charge || !bi->maintenance_charge_size) { + bi->maintenance_charge = ab8500_maint_charg_table; + bi->maintenance_charge_size = ARRAY_SIZE(ab8500_maint_charg_table); + } + + if (bi->alert_low_temp_charge_current_ua < 0 || + bi->alert_low_temp_charge_voltage_uv < 0) + { + bi->alert_low_temp_charge_current_ua = 300000; + bi->alert_low_temp_charge_voltage_uv = 4000000; + } + if (bi->alert_high_temp_charge_current_ua < 0 || + bi->alert_high_temp_charge_voltage_uv < 0) + { + bi->alert_high_temp_charge_current_ua = 300000; + bi->alert_high_temp_charge_voltage_uv = 4000000; + } + /* * Internal resistance and factory resistance are tightly coupled * so both MUST be defined or we fall back to defaults. @@ -218,6 +207,13 @@ int ab8500_bm_of_probe(struct power_supply *psy, bi->resist_table_size = ARRAY_SIZE(temp_to_batres_tbl_thermistor); } + /* The default battery is emulated by a resistor at 7K */ + if (bi->bti_resistance_ohm < 0 || + bi->bti_resistance_tolerance < 0) { + bi->bti_resistance_ohm = 7000; + bi->bti_resistance_tolerance = 20; + } + if (!bi->ocv_table[0]) { /* Default capacity table at say 25 degrees Celsius */ bi->ocv_temp[0] = 25; diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c index cc33c5187fbb..b7e842dff567 100644 --- a/drivers/power/supply/ab8500_btemp.c +++ b/drivers/power/supply/ab8500_btemp.c @@ -26,13 +26,12 @@ #include <linux/mfd/core.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/thermal.h> #include <linux/iio/consumer.h> #include <linux/fixp-arith.h> #include "ab8500-bm.h" -#define VTVOUT_V 1800 - #define BTEMP_THERMAL_LOW_LIMIT -10 #define BTEMP_THERMAL_MED_LIMIT 0 #define BTEMP_THERMAL_HIGH_LIMIT_52 52 @@ -82,7 +81,7 @@ struct ab8500_btemp_ranges { * @bat_temp: Dispatched battery temperature in degree Celsius * @prev_bat_temp Last measured battery temperature in degree Celsius * @parent: Pointer to the struct ab8500 - * @adc_btemp_ball: ADC channel for the battery ball temperature + * @tz: Thermal zone for the battery * @adc_bat_ctrl: ADC channel for the battery control * @fg: Pointer to the struct fg * @bm: Platform specific battery management information @@ -100,7 +99,7 @@ struct ab8500_btemp { int bat_temp; int prev_bat_temp; struct ab8500 *parent; - struct iio_channel *btemp_ball; + struct thermal_zone_device *tz; struct iio_channel *bat_ctrl; struct ab8500_fg *fg; struct ab8500_bm_data *bm; @@ -135,8 +134,6 @@ static LIST_HEAD(ab8500_btemp_list); static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, int v_batctrl, int inst_curr) { - int rbs; - if (is_ab8500_1p1_or_earlier(di->parent)) { /* * For ABB cut1.0 and 1.1 BAT_CTRL is internally @@ -145,23 +142,11 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, return (450000 * (v_batctrl)) / (1800 - v_batctrl); } - if (di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL) { - /* - * If the battery has internal NTC, we use the current - * source to calculate the resistance. - */ - rbs = (v_batctrl * 1000 - - di->bm->gnd_lift_resistance * inst_curr) - / di->curr_source; - } else { - /* - * BAT_CTRL is internally - * connected to 1.8V through a 80k resistor - */ - rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl); - } - - return rbs; + /* + * BAT_CTRL is internally + * connected to 1.8V through a 80k resistor + */ + return (80000 * (v_batctrl)) / (1800 - v_batctrl); } /** @@ -187,155 +172,6 @@ static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di) } /** - * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source - * @di: pointer to the ab8500_btemp structure - * @enable: enable or disable the current source - * - * Enable or disable the current sources for the BatCtrl AD channel - */ -static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, - bool enable) -{ - int curr; - int ret = 0; - - /* - * BATCTRL current sources are included on AB8500 cut2.0 - * and future versions - */ - if (is_ab8500_1p1_or_earlier(di->parent)) - return 0; - - /* Only do this for batteries with internal NTC */ - if (di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL && enable) { - - if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) - curr = BAT_CTRL_7U_ENA; - else - curr = BAT_CTRL_20U_ENA; - - dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); - - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH); - if (ret) { - dev_err(di->dev, "%s failed setting cmp_force\n", - __func__); - return ret; - } - - /* - * We have to wait one 32kHz cycle before enabling - * the current source, since ForceBatCtrlCmpHigh needs - * to be written in a separate cycle - */ - udelay(32); - - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - FORCE_BAT_CTRL_CMP_HIGH | curr); - if (ret) { - dev_err(di->dev, "%s failed enabling current source\n", - __func__); - goto disable_curr_source; - } - } else if (di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL && !enable) { - dev_dbg(di->dev, "Disable BATCTRL curr source\n"); - - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible( - di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, - ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); - - if (ret) { - dev_err(di->dev, "%s failed disabling current source\n", - __func__); - goto disable_curr_source; - } - - /* Enable Pull-Up and comparator */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, - BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); - if (ret) { - dev_err(di->dev, "%s failed enabling PU and comp\n", - __func__); - goto enable_pu_comp; - } - - /* - * We have to wait one 32kHz cycle before disabling - * ForceBatCtrlCmpHigh since this needs to be written - * in a separate cycle - */ - udelay(32); - - /* Disable 'force comparator' */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); - if (ret) { - dev_err(di->dev, "%s failed disabling force comp\n", - __func__); - goto disable_force_comp; - } - } - return ret; - - /* - * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time - * if we got an error above - */ -disable_curr_source: - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, - ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); - - if (ret) { - dev_err(di->dev, "%s failed disabling current source\n", - __func__); - return ret; - } -enable_pu_comp: - /* Enable Pull-Up and comparator */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, - BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); - if (ret) { - dev_err(di->dev, "%s failed enabling PU and comp\n", - __func__); - return ret; - } - -disable_force_comp: - /* - * We have to wait one 32kHz cycle before disabling - * ForceBatCtrlCmpHigh since this needs to be written - * in a separate cycle - */ - udelay(32); - - /* Disable 'force comparator' */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); - if (ret) { - dev_err(di->dev, "%s failed disabling force comp\n", - __func__); - return ret; - } - - return ret; -} - -/** * ab8500_btemp_get_batctrl_res() - get battery resistance * @di: pointer to the ab8500_btemp structure * @@ -350,16 +186,6 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) int inst_curr; int i; - /* - * BATCTRL current sources are included on AB8500 cut2.0 - * and future versions - */ - ret = ab8500_btemp_curr_source_enable(di, true); - if (ret) { - dev_err(di->dev, "%s curr source enabled failed\n", __func__); - return ret; - } - if (!di->fg) di->fg = ab8500_fg_get(); if (!di->fg) { @@ -395,12 +221,6 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr); - ret = ab8500_btemp_curr_source_enable(di, false); - if (ret) { - dev_err(di->dev, "%s curr source disable failed\n", __func__); - return ret; - } - dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n", __func__, batctrl, res, inst_curr, i); @@ -408,95 +228,6 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) } /** - * ab8500_btemp_res_to_temp() - resistance to temperature - * @di: pointer to the ab8500_btemp structure - * @tbl: pointer to the resiatance to temperature table - * @tbl_size: size of the resistance to temperature table - * @res: resistance to calculate the temperature from - * - * This function returns the battery temperature in degrees Celsius - * based on the NTC resistance. - */ -static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, - const struct ab8500_res_to_temp *tbl, int tbl_size, int res) -{ - int i; - /* - * Calculate the formula for the straight line - * Simple interpolation if we are within - * the resistance table limits, extrapolate - * if resistance is outside the limits. - */ - if (res > tbl[0].resist) - i = 0; - else if (res <= tbl[tbl_size - 1].resist) - i = tbl_size - 2; - else { - i = 0; - while (!(res <= tbl[i].resist && - res > tbl[i + 1].resist)) - i++; - } - - return fixp_linear_interpolate(tbl[i].resist, tbl[i].temp, - tbl[i + 1].resist, tbl[i + 1].temp, - res); -} - -/** - * ab8500_btemp_measure_temp() - measure battery temperature - * @di: pointer to the ab8500_btemp structure - * - * Returns battery temperature (on success) else the previous temperature - */ -static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) -{ - struct power_supply_battery_info *bi = di->bm->bi; - int temp, ret; - static int prev; - int rbat, rntc, vntc; - - if ((di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL) && - (bi && (bi->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN))) { - - rbat = ab8500_btemp_get_batctrl_res(di); - if (rbat < 0) { - dev_err(di->dev, "%s get batctrl res failed\n", - __func__); - /* - * Return out-of-range temperature so that - * charging is stopped - */ - return BTEMP_THERMAL_LOW_LIMIT; - } - - temp = ab8500_btemp_res_to_temp(di, - di->bm->bat_type->r_to_t_tbl, - di->bm->bat_type->n_temp_tbl_elements, rbat); - } else { - ret = iio_read_channel_processed(di->btemp_ball, &vntc); - if (ret < 0) { - dev_err(di->dev, - "%s ADC conversion failed," - " using previous value\n", __func__); - return prev; - } - /* - * The PCB NTC is sourced from VTVOUT via a 230kOhm - * resistor. - */ - rntc = 230000 * vntc / (VTVOUT_V - vntc); - - temp = ab8500_btemp_res_to_temp(di, - di->bm->bat_type->r_to_t_tbl, - di->bm->bat_type->n_temp_tbl_elements, rntc); - prev = temp; - } - dev_dbg(di->dev, "Battery temperature is %d\n", temp); - return temp; -} - -/** * ab8500_btemp_id() - Identify the connected battery * @di: pointer to the ab8500_btemp structure * @@ -506,8 +237,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) */ static int ab8500_btemp_id(struct ab8500_btemp *di) { + struct power_supply_battery_info *bi = di->bm->bi; int res; - u8 i; di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; @@ -517,36 +248,17 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) return -ENXIO; } - if ((res <= di->bm->bat_type->resis_high) && - (res >= di->bm->bat_type->resis_low)) { - dev_info(di->dev, "Battery detected on %s" - " low %d < res %d < high: %d" - " index: %d\n", - di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL ? - "BATCTRL" : "BATTEMP", - di->bm->bat_type->resis_low, res, - di->bm->bat_type->resis_high, i); + if (power_supply_battery_bti_in_range(bi, res)) { + dev_info(di->dev, "Battery detected on BATCTRL (pin C3)" + " resistance %d Ohm = %d Ohm +/- %d%%\n", + res, bi->bti_resistance_ohm, + bi->bti_resistance_tolerance); } else { dev_warn(di->dev, "Battery identified as unknown" ", resistance %d Ohm\n", res); return -ENXIO; } - /* - * We only have to change current source if the - * detected type is Type 1 (LIPO) resis_high = 53407, resis_low = 12500 - * if someone hacks this in. - * - * FIXME: make sure this is done automatically for the batteries - * that need it. - */ - if ((di->bm->adc_therm == AB8500_ADC_THERM_BATCTRL) && - (di->bm->bi && (di->bm->bi->technology == POWER_SUPPLY_TECHNOLOGY_LIPO)) && - (res <= 53407) && (res >= 12500)) { - dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); - di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; - } - return 0; } @@ -562,6 +274,9 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) int bat_temp; struct ab8500_btemp *di = container_of(work, struct ab8500_btemp, btemp_periodic_work.work); + /* Assume 25 degrees celsius as start temperature */ + static int prev = 25; + int ret; if (!di->initialized) { /* Identify the battery */ @@ -569,7 +284,17 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) dev_warn(di->dev, "failed to identify the battery\n"); } - bat_temp = ab8500_btemp_measure_temp(di); + /* Failover if a reading is erroneous, use last meausurement */ + ret = thermal_zone_get_temp(di->tz, &bat_temp); + if (ret) { + dev_err(di->dev, "error reading temperature\n"); + bat_temp = prev; + } else { + /* Convert from millicentigrades to centigrades */ + bat_temp /= 1000; + prev = bat_temp; + } + /* * Filter battery temperature. * Allow direct updates on temperature only if two samples result in @@ -998,12 +723,11 @@ static int ab8500_btemp_probe(struct platform_device *pdev) di->dev = dev; di->parent = dev_get_drvdata(pdev->dev.parent); - /* Get ADC channels */ - di->btemp_ball = devm_iio_channel_get(dev, "btemp_ball"); - if (IS_ERR(di->btemp_ball)) { - ret = dev_err_probe(dev, PTR_ERR(di->btemp_ball), - "failed to get BTEMP BALL ADC channel\n"); - return ret; + /* Get thermal zone and ADC */ + di->tz = thermal_zone_get_zone_by_name("battery-thermal"); + if (IS_ERR(di->tz)) { + return dev_err_probe(dev, PTR_ERR(di->tz), + "failed to get battery thermal zone\n"); } di->bat_ctrl = devm_iio_channel_get(dev, "bat_ctrl"); if (IS_ERR(di->bat_ctrl)) { diff --git a/drivers/power/supply/ab8500_chargalg.c b/drivers/power/supply/ab8500_chargalg.c index c4a2fe07126c..431bbc352d1b 100644 --- a/drivers/power/supply/ab8500_chargalg.c +++ b/drivers/power/supply/ab8500_chargalg.c @@ -46,9 +46,6 @@ /* Five minutes expressed in seconds */ #define FIVE_MINUTES_IN_SECONDS 300 -#define CHARGALG_CURR_STEP_LOW_UA 0 -#define CHARGALG_CURR_STEP_HIGH_UA 100000 - /* * This is the battery capacity limit that will trigger a new * full charging cycle in the case where maintenance charging @@ -80,17 +77,6 @@ struct ab8500_chargalg_charger_info { int ac_iset_ua; }; -struct ab8500_chargalg_suspension_status { - bool suspended_change; - bool ac_suspended; - bool usb_suspended; -}; - -struct ab8500_chargalg_current_step_status { - bool curr_step_change; - int curr_step_ua; -}; - struct ab8500_chargalg_battery_data { int temp; int volt_uv; @@ -118,8 +104,6 @@ enum ab8500_chargalg_states { STATE_TEMP_UNDEROVER, STATE_TEMP_LOWHIGH_INIT, STATE_TEMP_LOWHIGH, - STATE_SUSPENDED_INIT, - STATE_SUSPENDED, STATE_OVV_PROTECT_INIT, STATE_OVV_PROTECT, STATE_SAFETY_TIMER_EXPIRED_INIT, @@ -149,8 +133,6 @@ static const char * const states[] = { "TEMP_UNDEROVER", "TEMP_LOWHIGH_INIT", "TEMP_LOWHIGH", - "SUSPENDED_INIT", - "SUSPENDED", "OVV_PROTECT_INIT", "OVV_PROTECT", "SAFETY_TIMER_EXPIRED_INIT", @@ -167,7 +149,8 @@ struct ab8500_chargalg_events { bool batt_ovv; bool batt_rem; bool btemp_underover; - bool btemp_lowhigh; + bool btemp_low; + bool btemp_high; bool main_thermal_prot; bool usb_thermal_prot; bool main_ovv; @@ -186,8 +169,6 @@ struct ab8500_chargalg_events { * struct ab8500_charge_curr_maximization - Charger maximization parameters * @original_iset_ua: the non optimized/maximised charger current * @current_iset_ua: the charging current used at this moment - * @test_delta_i_ua: the delta between the current we want to charge and the - current that is really going into the battery * @condition_cnt: number of iterations needed before a new charger current is set * @max_current_ua: maximum charger current @@ -200,7 +181,6 @@ struct ab8500_chargalg_events { struct ab8500_charge_curr_maximization { int original_iset_ua; int current_iset_ua; - int test_delta_i_ua; int condition_cnt; int max_current_ua; int wait_cnt; @@ -227,9 +207,7 @@ enum maxim_ret { * @ccm charging current maximization parameters * @chg_info: information about connected charger types * @batt_data: data of the battery - * @susp_status: current charger suspension status * @bm: Platform specific battery management information - * @curr_status: Current step status for over-current protection * @parent: pointer to the struct ab8500 * @chargalg_psy: structure that holds the battery properties exposed by * the charging algorithm @@ -253,9 +231,7 @@ struct ab8500_chargalg { struct ab8500_charge_curr_maximization ccm; struct ab8500_chargalg_charger_info chg_info; struct ab8500_chargalg_battery_data batt_data; - struct ab8500_chargalg_suspension_status susp_status; struct ab8500 *parent; - struct ab8500_chargalg_current_step_status curr_status; struct ab8500_bm_data *bm; struct power_supply *chargalg_psy; struct ux500_charger *ac_chg; @@ -311,7 +287,7 @@ ab8500_chargalg_safety_timer_expired(struct hrtimer *timer) * the maintenance timer * @timer: pointer to the timer structure * - * This function gets called when the maintenence timer + * This function gets called when the maintenance timer * expires */ static enum hrtimer_restart @@ -385,58 +361,29 @@ static int ab8500_chargalg_check_charger_enable(struct ab8500_chargalg *di) */ static int ab8500_chargalg_check_charger_connection(struct ab8500_chargalg *di) { - if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg || - di->susp_status.suspended_change) { - /* - * Charger state changed or suspension - * has changed since last update - */ - if ((di->chg_info.conn_chg & AC_CHG) && - !di->susp_status.ac_suspended) { - dev_dbg(di->dev, "Charging source is AC\n"); + if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg) { + /* Charger state changed since last update */ + if (di->chg_info.conn_chg & AC_CHG) { + dev_info(di->dev, "Charging source is AC\n"); if (di->chg_info.charger_type != AC_CHG) { di->chg_info.charger_type = AC_CHG; ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); } - } else if ((di->chg_info.conn_chg & USB_CHG) && - !di->susp_status.usb_suspended) { - dev_dbg(di->dev, "Charging source is USB\n"); + } else if (di->chg_info.conn_chg & USB_CHG) { + dev_info(di->dev, "Charging source is USB\n"); di->chg_info.charger_type = USB_CHG; ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); - } else if (di->chg_info.conn_chg && - (di->susp_status.ac_suspended || - di->susp_status.usb_suspended)) { - dev_dbg(di->dev, "Charging is suspended\n"); - di->chg_info.charger_type = NO_CHG; - ab8500_chargalg_state_to(di, STATE_SUSPENDED_INIT); } else { dev_dbg(di->dev, "Charging source is OFF\n"); di->chg_info.charger_type = NO_CHG; ab8500_chargalg_state_to(di, STATE_HANDHELD_INIT); } di->chg_info.prev_conn_chg = di->chg_info.conn_chg; - di->susp_status.suspended_change = false; } return di->chg_info.conn_chg; } /** - * ab8500_chargalg_check_current_step_status() - Check charging current - * step status. - * @di: pointer to the ab8500_chargalg structure - * - * This function will check if there is a change in the charging current step - * and change charge state accordingly. - */ -static void ab8500_chargalg_check_current_step_status - (struct ab8500_chargalg *di) -{ - if (di->curr_status.curr_step_change) - ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); - di->curr_status.curr_step_change = false; -} - -/** * ab8500_chargalg_start_safety_timer() - Start charging safety timer * @di: pointer to the ab8500_chargalg structure * @@ -484,7 +431,7 @@ static void ab8500_chargalg_stop_safety_timer(struct ab8500_chargalg *di) /** * ab8500_chargalg_start_maintenance_timer() - Start charging maintenance timer * @di: pointer to the ab8500_chargalg structure - * @duration: duration of ther maintenance timer in hours + * @duration: duration of the maintenance timer in minutes * * The maintenance timer is used to maintain the charge in the battery once * the battery is considered full. These timers are chosen to match the @@ -493,9 +440,10 @@ static void ab8500_chargalg_stop_safety_timer(struct ab8500_chargalg *di) static void ab8500_chargalg_start_maintenance_timer(struct ab8500_chargalg *di, int duration) { + /* Set a timer in minutes with a 30 second range */ hrtimer_set_expires_range(&di->maintenance_timer, - ktime_set(duration * ONE_HOUR_IN_SECONDS, 0), - ktime_set(FIVE_MINUTES_IN_SECONDS, 0)); + ktime_set(duration * 60, 0), + ktime_set(30, 0)); di->events.maintenance_timer_expired = false; hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL); } @@ -737,26 +685,31 @@ static void ab8500_chargalg_check_temp(struct ab8500_chargalg *di) di->batt_data.temp < (bi->temp_alert_max - di->t_hyst_norm)) { /* Temp OK! */ di->events.btemp_underover = false; - di->events.btemp_lowhigh = false; + di->events.btemp_low = false; + di->events.btemp_high = false; di->t_hyst_norm = 0; di->t_hyst_lowhigh = 0; } else { - if (((di->batt_data.temp >= bi->temp_alert_max) && - (di->batt_data.temp < - (bi->temp_max - di->t_hyst_lowhigh))) || - ((di->batt_data.temp > - (bi->temp_min + di->t_hyst_lowhigh)) && - (di->batt_data.temp <= bi->temp_alert_min))) { - /* TEMP minor!!!!! */ + if ((di->batt_data.temp >= bi->temp_alert_max) && + (di->batt_data.temp < (bi->temp_max - di->t_hyst_lowhigh))) { + /* Alert zone for high temperature */ di->events.btemp_underover = false; - di->events.btemp_lowhigh = true; + di->events.btemp_high = true; + di->t_hyst_norm = di->bm->temp_hysteresis; + di->t_hyst_lowhigh = 0; + } else if ((di->batt_data.temp > (bi->temp_min + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= bi->temp_alert_min)) { + /* Alert zone for low temperature */ + di->events.btemp_underover = false; + di->events.btemp_low = true; di->t_hyst_norm = di->bm->temp_hysteresis; di->t_hyst_lowhigh = 0; } else if (di->batt_data.temp <= bi->temp_min || di->batt_data.temp >= bi->temp_max) { /* TEMP major!!!!! */ di->events.btemp_underover = true; - di->events.btemp_lowhigh = false; + di->events.btemp_low = false; + di->events.btemp_high = false; di->t_hyst_norm = 0; di->t_hyst_lowhigh = di->bm->temp_hysteresis; } else { @@ -802,7 +755,7 @@ static void ab8500_chargalg_end_of_charge(struct ab8500_chargalg *di) if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && di->charge_state == STATE_NORMAL && !di->maintenance_chg && (di->batt_data.volt_uv >= - di->bm->bi->overvoltage_limit_uv || + di->bm->bi->voltage_max_design_uv || di->events.usb_cv_active || di->events.ac_cv_active) && di->batt_data.avg_curr_ua < di->bm->bi->charge_term_current_ua && @@ -831,7 +784,6 @@ static void init_maxim_chg_curr(struct ab8500_chargalg *di) di->ccm.original_iset_ua = bi->constant_charge_current_max_ua; di->ccm.current_iset_ua = bi->constant_charge_current_max_ua; - di->ccm.test_delta_i_ua = di->bm->maxi->charger_curr_step_ua; di->ccm.max_current_ua = di->bm->maxi->chg_curr_ua; di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.level = 0; @@ -848,13 +800,10 @@ static void init_maxim_chg_curr(struct ab8500_chargalg *di) */ static enum maxim_ret ab8500_chargalg_chg_curr_maxim(struct ab8500_chargalg *di) { - int delta_i_ua; if (!di->bm->maxi->ena_maxi) return MAXIM_RET_NOACTION; - delta_i_ua = di->ccm.original_iset_ua - di->batt_data.inst_curr_ua; - if (di->events.vbus_collapsed) { dev_dbg(di->dev, "Charger voltage has collapsed %d\n", di->ccm.wait_cnt); @@ -862,8 +811,7 @@ static enum maxim_ret ab8500_chargalg_chg_curr_maxim(struct ab8500_chargalg *di) dev_dbg(di->dev, "lowering current\n"); di->ccm.wait_cnt++; di->ccm.condition_cnt = di->bm->maxi->wait_cycles; - di->ccm.max_current_ua = - di->ccm.current_iset_ua - di->ccm.test_delta_i_ua; + di->ccm.max_current_ua = di->ccm.current_iset_ua; di->ccm.current_iset_ua = di->ccm.max_current_ua; di->ccm.level--; return MAXIM_RET_CHANGE; @@ -893,29 +841,8 @@ static enum maxim_ret ab8500_chargalg_chg_curr_maxim(struct ab8500_chargalg *di) return MAXIM_RET_IBAT_TOO_HIGH; } - if (delta_i_ua > di->ccm.test_delta_i_ua && - (di->ccm.current_iset_ua + di->ccm.test_delta_i_ua) < - di->ccm.max_current_ua) { - if (di->ccm.condition_cnt-- == 0) { - /* Increse the iset with cco.test_delta_i */ - di->ccm.condition_cnt = di->bm->maxi->wait_cycles; - di->ccm.current_iset_ua += di->ccm.test_delta_i_ua; - di->ccm.level++; - dev_dbg(di->dev, " Maximization needed, increase" - " with %d uA to %duA (Optimal ibat: %d uA)" - " Level %d\n", - di->ccm.test_delta_i_ua, - di->ccm.current_iset_ua, - di->ccm.original_iset_ua, - di->ccm.level); - return MAXIM_RET_CHANGE; - } else { - return MAXIM_RET_NOACTION; - } - } else { - di->ccm.condition_cnt = di->bm->maxi->wait_cycles; - return MAXIM_RET_NOACTION; - } + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; + return MAXIM_RET_NOACTION; } static void handle_maxim_chg_curr(struct ab8500_chargalg *di) @@ -1300,9 +1227,9 @@ static void ab8500_chargalg_external_power_changed(struct power_supply *psy) static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) { struct power_supply_battery_info *bi = di->bm->bi; + struct power_supply_maintenance_charge_table *mt; int charger_status; int ret; - int curr_step_lvl_ua; /* Collect data from all power_supply class devices */ class_for_each_device(power_supply_class, NULL, @@ -1313,7 +1240,6 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) ab8500_chargalg_check_charger_voltage(di); charger_status = ab8500_chargalg_check_charger_connection(di); - ab8500_chargalg_check_current_step_status(di); if (is_ab8500(di->parent)) { ret = ab8500_chargalg_check_charger_enable(di); @@ -1335,12 +1261,6 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) } } - /* If suspended, we should not continue checking the flags */ - else if (di->charge_state == STATE_SUSPENDED_INIT || - di->charge_state == STATE_SUSPENDED) { - /* We don't do anything here, just don,t continue */ - } - /* Safety timer expiration */ else if (di->events.safety_timer_expired) { if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED) @@ -1348,7 +1268,7 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) STATE_SAFETY_TIMER_EXPIRED_INIT); } /* - * Check if any interrupts has occured + * Check if any interrupts has occurred * that will prevent us from charging */ @@ -1396,7 +1316,7 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) ab8500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT); } /* Battery temp high/low */ - else if (di->events.btemp_lowhigh) { + else if (di->events.btemp_low || di->events.btemp_high) { if (di->charge_state != STATE_TEMP_LOWHIGH) ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT); } @@ -1438,23 +1358,6 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) case STATE_HANDHELD: break; - case STATE_SUSPENDED_INIT: - if (di->susp_status.ac_suspended) - ab8500_chargalg_ac_en(di, false, 0, 0); - if (di->susp_status.usb_suspended) - ab8500_chargalg_usb_en(di, false, 0, 0); - ab8500_chargalg_stop_safety_timer(di); - ab8500_chargalg_stop_maintenance_timer(di); - di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - di->maintenance_chg = false; - ab8500_chargalg_state_to(di, STATE_SUSPENDED); - power_supply_changed(di->chargalg_psy); - fallthrough; - - case STATE_SUSPENDED: - /* CHARGING is suspended */ - break; - case STATE_BATT_REMOVED_INIT: ab8500_chargalg_stop_charging(di); ab8500_chargalg_state_to(di, STATE_BATT_REMOVED); @@ -1511,15 +1414,13 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) break; case STATE_NORMAL_INIT: - if (di->curr_status.curr_step_ua == CHARGALG_CURR_STEP_LOW_UA) + if (bi->constant_charge_current_max_ua == 0) + /* "charging" with 0 uA */ ab8500_chargalg_stop_charging(di); else { - curr_step_lvl_ua = bi->constant_charge_current_max_ua - * di->curr_status.curr_step_ua - / CHARGALG_CURR_STEP_HIGH_UA; ab8500_chargalg_start_charging(di, bi->constant_charge_voltage_max_uv, - curr_step_lvl_ua); + bi->constant_charge_current_max_ua); } ab8500_chargalg_state_to(di, STATE_NORMAL); @@ -1537,7 +1438,12 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) handle_maxim_chg_curr(di); if (di->charge_status == POWER_SUPPLY_STATUS_FULL && di->maintenance_chg) { - if (di->bm->no_maintenance) + /* + * The battery is fully charged, check if we support + * maintenance charging else go back to waiting for + * the recharge voltage limit. + */ + if (!power_supply_supports_maintenance_charging(bi)) ab8500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE_INIT); else @@ -1558,12 +1464,19 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) break; case STATE_MAINTENANCE_A_INIT: + mt = power_supply_get_maintenance_charging_setting(bi, 0); + if (!mt) { + /* No maintenance A state, go back to normal */ + ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); + power_supply_changed(di->chargalg_psy); + break; + } ab8500_chargalg_stop_safety_timer(di); ab8500_chargalg_start_maintenance_timer(di, - di->bm->bat_type->maint_a_chg_timer_h); + mt->charge_safety_timer_minutes); ab8500_chargalg_start_charging(di, - di->bm->bat_type->maint_a_vol_lvl, - di->bm->bat_type->maint_a_cur_lvl); + mt->charge_voltage_max_uv, + mt->charge_current_max_ua); ab8500_chargalg_state_to(di, STATE_MAINTENANCE_A); power_supply_changed(di->chargalg_psy); fallthrough; @@ -1576,11 +1489,18 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) break; case STATE_MAINTENANCE_B_INIT: + mt = power_supply_get_maintenance_charging_setting(bi, 1); + if (!mt) { + /* No maintenance B state, go back to normal */ + ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); + power_supply_changed(di->chargalg_psy); + break; + } ab8500_chargalg_start_maintenance_timer(di, - di->bm->bat_type->maint_b_chg_timer_h); + mt->charge_safety_timer_minutes); ab8500_chargalg_start_charging(di, - di->bm->bat_type->maint_b_vol_lvl, - di->bm->bat_type->maint_b_cur_lvl); + mt->charge_voltage_max_uv, + mt->charge_current_max_ua); ab8500_chargalg_state_to(di, STATE_MAINTENANCE_B); power_supply_changed(di->chargalg_psy); fallthrough; @@ -1593,9 +1513,19 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) break; case STATE_TEMP_LOWHIGH_INIT: - ab8500_chargalg_start_charging(di, - di->bm->bat_type->low_high_vol_lvl, - di->bm->bat_type->low_high_cur_lvl); + if (di->events.btemp_low) { + ab8500_chargalg_start_charging(di, + bi->alert_low_temp_charge_voltage_uv, + bi->alert_low_temp_charge_current_ua); + } else if (di->events.btemp_high) { + ab8500_chargalg_start_charging(di, + bi->alert_high_temp_charge_voltage_uv, + bi->alert_high_temp_charge_current_ua); + } else { + dev_err(di->dev, "neither low or high temp event occurred\n"); + ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + } ab8500_chargalg_stop_maintenance_timer(di); di->charge_status = POWER_SUPPLY_STATUS_CHARGING; ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); @@ -1603,7 +1533,7 @@ static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di) fallthrough; case STATE_TEMP_LOWHIGH: - if (!di->events.btemp_lowhigh) + if (!di->events.btemp_low && !di->events.btemp_high) ab8500_chargalg_state_to(di, STATE_NORMAL_INIT); break; @@ -1740,180 +1670,6 @@ static int ab8500_chargalg_get_property(struct power_supply *psy, return 0; } -/* Exposure to the sysfs interface */ - -static ssize_t ab8500_chargalg_curr_step_show(struct ab8500_chargalg *di, - char *buf) -{ - return sprintf(buf, "%d\n", di->curr_status.curr_step_ua); -} - -static ssize_t ab8500_chargalg_curr_step_store(struct ab8500_chargalg *di, - const char *buf, size_t length) -{ - long param; - int ret; - - ret = kstrtol(buf, 10, ¶m); - if (ret < 0) - return ret; - - di->curr_status.curr_step_ua = param; - if (di->curr_status.curr_step_ua >= CHARGALG_CURR_STEP_LOW_UA && - di->curr_status.curr_step_ua <= CHARGALG_CURR_STEP_HIGH_UA) { - di->curr_status.curr_step_change = true; - queue_work(di->chargalg_wq, &di->chargalg_work); - } else - dev_info(di->dev, "Wrong current step\n" - "Enter 0. Disable AC/USB Charging\n" - "1--100. Set AC/USB charging current step\n" - "100. Enable AC/USB Charging\n"); - - return strlen(buf); -} - - -static ssize_t ab8500_chargalg_en_show(struct ab8500_chargalg *di, - char *buf) -{ - return sprintf(buf, "%d\n", - di->susp_status.ac_suspended && - di->susp_status.usb_suspended); -} - -static ssize_t ab8500_chargalg_en_store(struct ab8500_chargalg *di, - const char *buf, size_t length) -{ - long param; - int ac_usb; - int ret; - - ret = kstrtol(buf, 10, ¶m); - if (ret < 0) - return ret; - - ac_usb = param; - switch (ac_usb) { - case 0: - /* Disable charging */ - di->susp_status.ac_suspended = true; - di->susp_status.usb_suspended = true; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - case 1: - /* Enable AC Charging */ - di->susp_status.ac_suspended = false; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - case 2: - /* Enable USB charging */ - di->susp_status.usb_suspended = false; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - default: - dev_info(di->dev, "Wrong input\n" - "Enter 0. Disable AC/USB Charging\n" - "1. Enable AC charging\n" - "2. Enable USB Charging\n"); - } - return strlen(buf); -} - -static struct ab8500_chargalg_sysfs_entry ab8500_chargalg_en_charger = - __ATTR(chargalg, 0644, ab8500_chargalg_en_show, - ab8500_chargalg_en_store); - -static struct ab8500_chargalg_sysfs_entry ab8500_chargalg_curr_step = - __ATTR(chargalg_curr_step, 0644, ab8500_chargalg_curr_step_show, - ab8500_chargalg_curr_step_store); - -static ssize_t ab8500_chargalg_sysfs_show(struct kobject *kobj, - struct attribute *attr, char *buf) -{ - struct ab8500_chargalg_sysfs_entry *entry = container_of(attr, - struct ab8500_chargalg_sysfs_entry, attr); - - struct ab8500_chargalg *di = container_of(kobj, - struct ab8500_chargalg, chargalg_kobject); - - if (!entry->show) - return -EIO; - - return entry->show(di, buf); -} - -static ssize_t ab8500_chargalg_sysfs_charger(struct kobject *kobj, - struct attribute *attr, const char *buf, size_t length) -{ - struct ab8500_chargalg_sysfs_entry *entry = container_of(attr, - struct ab8500_chargalg_sysfs_entry, attr); - - struct ab8500_chargalg *di = container_of(kobj, - struct ab8500_chargalg, chargalg_kobject); - - if (!entry->store) - return -EIO; - - return entry->store(di, buf, length); -} - -static struct attribute *ab8500_chargalg_chg[] = { - &ab8500_chargalg_en_charger.attr, - &ab8500_chargalg_curr_step.attr, - NULL, -}; - -static const struct sysfs_ops ab8500_chargalg_sysfs_ops = { - .show = ab8500_chargalg_sysfs_show, - .store = ab8500_chargalg_sysfs_charger, -}; - -static struct kobj_type ab8500_chargalg_ktype = { - .sysfs_ops = &ab8500_chargalg_sysfs_ops, - .default_attrs = ab8500_chargalg_chg, -}; - -/** - * ab8500_chargalg_sysfs_exit() - de-init of sysfs entry - * @di: pointer to the struct ab8500_chargalg - * - * This function removes the entry in sysfs. - */ -static void ab8500_chargalg_sysfs_exit(struct ab8500_chargalg *di) -{ - kobject_del(&di->chargalg_kobject); -} - -/** - * ab8500_chargalg_sysfs_init() - init of sysfs entry - * @di: pointer to the struct ab8500_chargalg - * - * This function adds an entry in sysfs. - * Returns error code in case of failure else 0(on success) - */ -static int ab8500_chargalg_sysfs_init(struct ab8500_chargalg *di) -{ - int ret = 0; - - ret = kobject_init_and_add(&di->chargalg_kobject, - &ab8500_chargalg_ktype, - NULL, "ab8500_chargalg"); - if (ret < 0) - dev_err(di->dev, "failed to create sysfs entry\n"); - - return ret; -} -/* Exposure to the sysfs interface <<END>> */ - static int __maybe_unused ab8500_chargalg_resume(struct device *dev) { struct ab8500_chargalg *di = dev_get_drvdata(dev); @@ -2003,7 +1759,6 @@ static int ab8500_chargalg_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct power_supply_config psy_cfg = {}; struct ab8500_chargalg *di; - int ret = 0; di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL); if (!di) @@ -2020,11 +1775,11 @@ static int ab8500_chargalg_probe(struct platform_device *pdev) psy_cfg.drv_data = di; /* Initilialize safety timer */ - hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); + hrtimer_init(&di->safety_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); di->safety_timer.function = ab8500_chargalg_safety_timer_expired; /* Initilialize maintenance timer */ - hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); + hrtimer_init(&di->maintenance_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); di->maintenance_timer.function = ab8500_chargalg_maintenance_timer_expired; @@ -2051,27 +1806,14 @@ static int ab8500_chargalg_probe(struct platform_device *pdev) platform_set_drvdata(pdev, di); - /* sysfs interface to enable/disable charging from user space */ - ret = ab8500_chargalg_sysfs_init(di); - if (ret) { - dev_err(di->dev, "failed to create sysfs entry\n"); - return ret; - } - di->curr_status.curr_step_ua = CHARGALG_CURR_STEP_HIGH_UA; - dev_info(di->dev, "probe success\n"); return component_add(dev, &ab8500_chargalg_component_ops); } static int ab8500_chargalg_remove(struct platform_device *pdev) { - struct ab8500_chargalg *di = platform_get_drvdata(pdev); - component_del(&pdev->dev, &ab8500_chargalg_component_ops); - /* sysfs interface to enable/disable charging from user space */ - ab8500_chargalg_sysfs_exit(di); - return 0; } diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c index ce074c018dcb..b17d4649210a 100644 --- a/drivers/power/supply/ab8500_charger.c +++ b/drivers/power/supply/ab8500_charger.c @@ -163,7 +163,7 @@ enum ab8500_usb_state { #define USB_CH_IP_CUR_LVL_1P4 1400000 #define USB_CH_IP_CUR_LVL_1P5 1500000 -#define VBAT_TRESH_IP_CUR_RED 3800 +#define VBAT_TRESH_IP_CUR_RED 3800000 #define to_ab8500_charger_usb_device_info(x) container_of((x), \ struct ab8500_charger, usb_chg) @@ -171,7 +171,7 @@ enum ab8500_usb_state { struct ab8500_charger, ac_chg) /** - * struct ab8500_charger_interrupts - ab8500 interupts + * struct ab8500_charger_interrupts - ab8500 interrupts * @name: name of the interrupt * @isr function pointer to the isr */ @@ -1083,7 +1083,7 @@ static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr_ua) /** * ab8500_charger_get_usb_cur() - get usb current - * @di: pointer to the ab8500_charger structre + * @di: pointer to the ab8500_charger structure * * The usb stack provides the maximum current that can be drawn from * the standard usb host. This will be in uA. @@ -1920,7 +1920,11 @@ static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) di = to_ab8500_charger_usb_device_info(usb_chg); - /* For all psy where the driver name appears in any supplied_to */ + /* + * For all psy where the driver name appears in any supplied_to + * in practice what we will find will always be "ab8500_fg" as + * the fuel gauge is responsible of keeping track of VBAT. + */ j = match_string(supplicants, ext->num_supplicants, psy->desc->name); if (j < 0) return 0; @@ -1937,7 +1941,10 @@ static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) case POWER_SUPPLY_PROP_VOLTAGE_NOW: switch (ext->desc->type) { case POWER_SUPPLY_TYPE_BATTERY: - di->vbat = ret.intval / 1000; + /* This will always be "ab8500_fg" */ + dev_dbg(di->dev, "get VBAT from %s\n", + dev_name(&ext->dev)); + di->vbat = ret.intval; break; default: break; @@ -1966,7 +1973,7 @@ static void ab8500_charger_check_vbat_work(struct work_struct *work) struct ab8500_charger, check_vbat_work.work); class_for_each_device(power_supply_class, NULL, - di->usb_chg.psy, ab8500_charger_get_ext_psy_data); + &di->usb_chg, ab8500_charger_get_ext_psy_data); /* First run old_vbat is 0. */ if (di->old_vbat == 0) @@ -1991,8 +1998,8 @@ static void ab8500_charger_check_vbat_work(struct work_struct *work) * No need to check the battery voltage every second when not close to * the threshold. */ - if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && - (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) + if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100000) && + (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100000))) t = 1; queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); @@ -3443,17 +3450,19 @@ static int ab8500_charger_probe(struct platform_device *pdev) di->parent = dev_get_drvdata(pdev->dev.parent); /* Get ADC channels */ - di->adc_main_charger_v = devm_iio_channel_get(dev, "main_charger_v"); - if (IS_ERR(di->adc_main_charger_v)) { - ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_v), - "failed to get ADC main charger voltage\n"); - return ret; - } - di->adc_main_charger_c = devm_iio_channel_get(dev, "main_charger_c"); - if (IS_ERR(di->adc_main_charger_c)) { - ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_c), - "failed to get ADC main charger current\n"); - return ret; + if (!is_ab8505(di->parent)) { + di->adc_main_charger_v = devm_iio_channel_get(dev, "main_charger_v"); + if (IS_ERR(di->adc_main_charger_v)) { + ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_v), + "failed to get ADC main charger voltage\n"); + return ret; + } + di->adc_main_charger_c = devm_iio_channel_get(dev, "main_charger_c"); + if (IS_ERR(di->adc_main_charger_c)) { + ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_c), + "failed to get ADC main charger current\n"); + return ret; + } } di->adc_vbus_v = devm_iio_channel_get(dev, "vbus_v"); if (IS_ERR(di->adc_vbus_v)) { diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c index b0919a6a6587..3ae8086907de 100644 --- a/drivers/power/supply/ab8500_fg.c +++ b/drivers/power/supply/ab8500_fg.c @@ -45,6 +45,9 @@ #define SEC_TO_SAMPLE(S) (S * 4) #define NBR_AVG_SAMPLES 20 +#define WAIT_FOR_INST_CURRENT_MAX 70 +/* Currents higher than -500mA (dissipating) will make compensation unstable */ +#define IGNORE_VBAT_HIGHCUR -500000 #define LOW_BAT_CHECK_INTERVAL (HZ / 16) /* 62.5 ms */ @@ -210,6 +213,7 @@ struct ab8500_fg { int init_cnt; int low_bat_cnt; int nbr_cceoc_irq_cnt; + u32 line_impedance_uohm; bool recovery_needed; bool high_curr_mode; bool init_capacity; @@ -874,27 +878,41 @@ static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di) /** * ab8500_fg_battery_resistance() - Returns the battery inner resistance * @di: pointer to the ab8500_fg structure + * @vbat_uncomp_uv: Uncompensated VBAT voltage * * Returns battery inner resistance added with the fuel gauge resistor value * to get the total resistance in the whole link from gnd to bat+ node * in milliohm. */ -static int ab8500_fg_battery_resistance(struct ab8500_fg *di) +static int ab8500_fg_battery_resistance(struct ab8500_fg *di, int vbat_uncomp_uv) { struct power_supply_battery_info *bi = di->bm->bi; int resistance_percent = 0; int resistance; - resistance_percent = power_supply_temp2resist_simple(bi->resist_table, - bi->resist_table_size, - di->bat_temp / 10); /* - * We get a percentage of factory resistance here so first get - * the factory resistance in milliohms then calculate how much - * resistance we have at this temperature. + * Determine the resistance at this voltage. First try VBAT-to-Ri else + * just infer it from the surrounding temperature, if nothing works just + * use the internal resistance. */ - resistance = (bi->factory_internal_resistance_uohm / 1000); - resistance = resistance * resistance_percent / 100; + if (power_supply_supports_vbat2ri(bi)) { + resistance = power_supply_vbat2ri(bi, vbat_uncomp_uv, di->flags.charging); + /* Convert to milliohm */ + resistance = resistance / 1000; + } else if (power_supply_supports_temp2ri(bi)) { + resistance_percent = power_supply_temp2resist_simple(bi->resist_table, + bi->resist_table_size, + di->bat_temp / 10); + /* Convert to milliohm */ + resistance = bi->factory_internal_resistance_uohm / 1000; + resistance = resistance * resistance_percent / 100; + } else { + /* Last fallback */ + resistance = bi->factory_internal_resistance_uohm / 1000; + } + + /* Compensate for line impedance */ + resistance += (di->line_impedance_uohm / 1000); dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d" " fg resistance %d, total: %d (mOhm)\n", @@ -908,40 +926,71 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di) } /** - * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity + * ab8500_load_comp_fg_bat_voltage() - get load compensated battery voltage * @di: pointer to the ab8500_fg structure + * @always: always return a voltage, also uncompensated * - * Returns battery capacity based on battery voltage that is load compensated - * for the voltage drop + * Returns compensated battery voltage (on success) else error code. + * If always is specified, we always return a voltage but it may be + * uncompensated. */ -static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di) +static int ab8500_load_comp_fg_bat_voltage(struct ab8500_fg *di, bool always) { - int vbat_comp_uv, res; int i = 0; int vbat_uv = 0; + int rcomp; + /* Average the instant current to get a stable current measurement */ ab8500_fg_inst_curr_start(di); do { vbat_uv += ab8500_fg_bat_voltage(di); i++; usleep_range(5000, 6000); - } while (!ab8500_fg_inst_curr_done(di)); + } while (!ab8500_fg_inst_curr_done(di) && + i <= WAIT_FOR_INST_CURRENT_MAX); - ab8500_fg_inst_curr_finalize(di, &di->inst_curr_ua); + if (i > WAIT_FOR_INST_CURRENT_MAX) { + dev_err(di->dev, + "TIMEOUT: return uncompensated measurement of VBAT\n"); + di->vbat_uv = vbat_uv / i; + return di->vbat_uv; + } - di->vbat_uv = vbat_uv / i; - res = ab8500_fg_battery_resistance(di); + ab8500_fg_inst_curr_finalize(di, &di->inst_curr_ua); /* - * Use Ohms law to get the load compensated voltage. - * Divide by 1000 to get from milliohms to ohms. + * If there is too high current dissipation, the compensation cannot be + * trusted so return an error unless we must return something here, as + * enforced by the "always" parameter. */ - vbat_comp_uv = di->vbat_uv - (di->inst_curr_ua * res) / 1000; + if (!always && di->inst_curr_ua < IGNORE_VBAT_HIGHCUR) + return -EINVAL; + + vbat_uv = vbat_uv / i; + + /* Next we apply voltage compensation from internal resistance */ + rcomp = ab8500_fg_battery_resistance(di, vbat_uv); + vbat_uv = vbat_uv - (di->inst_curr_ua * rcomp) / 1000; + + /* Always keep this state at latest measurement */ + di->vbat_uv = vbat_uv; + + return vbat_uv; +} + +/** + * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity + * @di: pointer to the ab8500_fg structure + * + * Returns battery capacity based on battery voltage that is load compensated + * for the voltage drop + */ +static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di) +{ + int vbat_comp_uv; - dev_dbg(di->dev, "%s Measured Vbat: %d uV,Compensated Vbat %d uV, " - "R: %d mOhm, Current: %d uA Vbat Samples: %d\n", - __func__, di->vbat_uv, vbat_comp_uv, res, di->inst_curr_ua, i); + vbat_comp_uv = ab8500_load_comp_fg_bat_voltage(di, true); return ab8500_fg_volt_to_capacity(di, vbat_comp_uv); } @@ -1039,20 +1088,16 @@ static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di) /** * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage * @di: pointer to the ab8500_fg structure - * @comp: if voltage should be load compensated before capacity calc * - * Return the capacity in mAh based on the battery voltage. The voltage can - * either be load compensated or not. This value is added to the filter and a - * new mean value is calculated and returned. + * Return the capacity in mAh based on the load compensated battery voltage. + * This value is added to the filter and a new mean value is calculated and + * returned. */ -static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di, bool comp) +static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di) { int permille, mah; - if (comp) - permille = ab8500_fg_load_comp_volt_to_capacity(di); - else - permille = ab8500_fg_uncomp_volt_to_capacity(di); + permille = ab8500_fg_load_comp_volt_to_capacity(di); mah = ab8500_fg_convert_permille_to_mah(di, permille); @@ -1529,7 +1574,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) /* Discard the first [x] seconds */ if (di->init_cnt > di->bm->fg_params->init_discard_time) { - ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_calc_cap_discharge_voltage(di); ab8500_fg_check_capacity_limits(di, true); } @@ -1612,7 +1657,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) break; } - ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_calc_cap_discharge_voltage(di); } else { mutex_lock(&di->cc_lock); if (!di->flags.conv_done) { @@ -1646,7 +1691,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) break; case AB8500_FG_DISCHARGE_WAKEUP: - ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_calc_cap_discharge_voltage(di); di->fg_samples = SEC_TO_SAMPLE( di->bm->fg_params->accu_high_curr); @@ -1765,7 +1810,7 @@ static void ab8500_fg_periodic_work(struct work_struct *work) if (di->init_capacity) { /* Get an initial capacity calculation */ - ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_calc_cap_discharge_voltage(di); ab8500_fg_check_capacity_limits(di, true); di->init_capacity = false; @@ -2211,10 +2256,6 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) if (!di->flags.batt_id_received && (bi && (bi->technology != POWER_SUPPLY_TECHNOLOGY_UNKNOWN))) { - const struct ab8500_battery_type *b; - - b = di->bm->bat_type; - di->flags.batt_id_received = true; di->bat_cap.max_mah_design = @@ -2263,7 +2304,13 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) { int ret; - /* Set VBAT OVV threshold */ + /* + * Set VBAT OVV (overvoltage) threshold to 4.75V (typ) this is what + * the hardware supports, nothing else can be configured in hardware. + * See this as an "outer limit" where the charger will certainly + * shut down. Other (lower) overvoltage levels need to be implemented + * in software. + */ ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BATT_OVV, @@ -2382,7 +2429,7 @@ static void ab8500_fg_reinit_work(struct work_struct *work) if (!di->flags.calibrate) { dev_dbg(di->dev, "Resetting FG state machine to init.\n"); ab8500_fg_clear_cap_samples(di); - ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_calc_cap_discharge_voltage(di); ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT); queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); @@ -2521,8 +2568,10 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di) ret = kobject_init_and_add(&di->fg_kobject, &ab8500_fg_ktype, NULL, "battery"); - if (ret < 0) + if (ret < 0) { + kobject_put(&di->fg_kobject); dev_err(di->dev, "failed to create sysfs entry\n"); + } return ret; } @@ -3053,6 +3102,11 @@ static int ab8500_fg_probe(struct platform_device *pdev) return ret; } + if (!of_property_read_u32(dev->of_node, "line-impedance-micro-ohms", + &di->line_impedance_uohm)) + dev_info(dev, "line impedance: %u uOhm\n", + di->line_impedance_uohm); + psy_cfg.supplied_to = supply_interface; psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); psy_cfg.drv_data = di; @@ -3170,7 +3224,6 @@ static int ab8500_fg_probe(struct platform_device *pdev) static int ab8500_fg_remove(struct platform_device *pdev) { - int ret = 0; struct ab8500_fg *di = platform_get_drvdata(pdev); component_del(&pdev->dev, &ab8500_fg_component_ops); @@ -3178,7 +3231,7 @@ static int ab8500_fg_remove(struct platform_device *pdev) ab8500_fg_sysfs_exit(di); ab8500_fg_sysfs_psy_remove_attrs(di); - return ret; + return 0; } static SIMPLE_DEV_PM_OPS(ab8500_fg_pm_ops, ab8500_fg_suspend, ab8500_fg_resume); diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c index ac360016b08a..57e50208d537 100644 --- a/drivers/power/supply/axp20x_ac_power.c +++ b/drivers/power/supply/axp20x_ac_power.c @@ -377,11 +377,9 @@ static int axp20x_ac_power_probe(struct platform_device *pdev) /* Request irqs after registering, as irqs may trigger immediately */ for (i = 0; i < axp_data->num_irq_names; i++) { irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]); - if (irq < 0) { - dev_err(&pdev->dev, "No IRQ for %s: %d\n", - axp_data->irq_names[i], irq); + if (irq < 0) return irq; - } + power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq); ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i], axp20x_ac_power_irq, 0, diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index 5d197141f476..9106077c0dbb 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -186,7 +186,6 @@ static int axp20x_battery_get_prop(struct power_supply *psy, union power_supply_propval *val) { struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); - struct iio_channel *chan; int ret = 0, reg, val1; switch (psp) { @@ -266,12 +265,12 @@ static int axp20x_battery_get_prop(struct power_supply *psy, if (ret) return ret; - if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) - chan = axp20x_batt->batt_chrg_i; - else - chan = axp20x_batt->batt_dischrg_i; - - ret = iio_read_channel_processed(chan, &val->intval); + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) { + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); + } else { + ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1); + val->intval = -val1; + } if (ret) return ret; diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c index a1d110f7ddce..a1e6d1d44808 100644 --- a/drivers/power/supply/axp20x_usb_power.c +++ b/drivers/power/supply/axp20x_usb_power.c @@ -637,11 +637,9 @@ static int axp20x_usb_power_probe(struct platform_device *pdev) /* Request irqs after registering, as irqs may trigger immediately */ for (i = 0; i < axp_data->num_irq_names; i++) { irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]); - if (irq < 0) { - dev_err(&pdev->dev, "No IRQ for %s: %d\n", - axp_data->irq_names[i], irq); + if (irq < 0) return irq; - } + power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq); ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i], axp20x_usb_power_irq, 0, diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c index ec41f6cd3f93..19746e658a6a 100644 --- a/drivers/power/supply/axp288_charger.c +++ b/drivers/power/supply/axp288_charger.c @@ -42,11 +42,11 @@ #define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */ #define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */ #define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */ -#define VBUS_ISPOUT_VHOLD_SET_MASK 0x31 +#define VBUS_ISPOUT_VHOLD_SET_MASK 0x38 #define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3 #define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */ #define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */ -#define VBUS_ISPOUT_VHOLD_SET_4300MV 0x3 /* 4300mV */ +#define VBUS_ISPOUT_VHOLD_SET_4400MV 0x4 /* 4400mV */ #define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7) #define CHRG_CCCV_CC_MASK 0xf /* 4 bits */ @@ -769,6 +769,16 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info) ret = axp288_charger_vbus_path_select(info, true); if (ret < 0) return ret; + } else { + /* Set Vhold to the factory default / recommended 4.4V */ + val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS; + ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT, + VBUS_ISPOUT_VHOLD_SET_MASK, val); + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", + AXP20X_VBUS_IPSOUT_MGMT, ret); + return ret; + } } /* Read current charge voltage and current limit */ @@ -829,6 +839,13 @@ static int axp288_charger_probe(struct platform_device *pdev) unsigned int val; /* + * Normally the native AXP288 fg/charger drivers are preferred but + * on some devices the ACPI drivers should be used instead. + */ + if (!acpi_quirk_skip_acpi_ac_and_battery()) + return -ENODEV; + + /* * On some devices the fuelgauge and charger parts of the axp288 are * not used, check that the fuelgauge is enabled (CC_CTRL != 0). */ diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c index c1da217fdb0e..e9f285dae489 100644 --- a/drivers/power/supply/axp288_fuel_gauge.c +++ b/drivers/power/supply/axp288_fuel_gauge.c @@ -9,6 +9,7 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#include <linux/acpi.h> #include <linux/dmi.h> #include <linux/module.h> #include <linux/kernel.h> @@ -88,6 +89,11 @@ #define AXP288_REG_UPDATE_INTERVAL (60 * HZ) #define AXP288_FG_INTR_NUM 6 + +static bool no_current_sense_res; +module_param(no_current_sense_res, bool, 0444); +MODULE_PARM_DESC(no_current_sense_res, "No (or broken) current sense resistor"); + enum { QWBTU_IRQ = 0, WBTU_IRQ, @@ -107,7 +113,6 @@ enum { struct axp288_fg_info { struct device *dev; struct regmap *regmap; - struct regmap_irq_chip_data *regmap_irqc; int irq[AXP288_FG_INTR_NUM]; struct iio_channel *iio_channel[IIO_CHANNEL_NUM]; struct power_supply *bat; @@ -138,12 +143,13 @@ static enum power_supply_property fuel_gauge_props[] = { POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_VOLTAGE_OCV, - POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, POWER_SUPPLY_PROP_TECHNOLOGY, + /* The 3 props below are not used when no_current_sense_res is set */ POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, }; static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg) @@ -225,7 +231,10 @@ static int fuel_gauge_update_registers(struct axp288_fg_info *info) goto out; info->pwr_stat = ret; - ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES); + if (no_current_sense_res) + ret = fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG); + else + ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES); if (ret < 0) goto out; info->fg_res = ret; @@ -234,6 +243,14 @@ static int fuel_gauge_update_registers(struct axp288_fg_info *info) if (ret < 0) goto out; + ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG); + if (ret < 0) + goto out; + info->ocv = ret; + + if (no_current_sense_res) + goto out_no_current_sense_res; + if (info->pwr_stat & PS_STAT_BAT_CHRG_DIR) { info->d_curr = 0; ret = iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], &info->c_curr); @@ -246,11 +263,6 @@ static int fuel_gauge_update_registers(struct axp288_fg_info *info) goto out; } - ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG); - if (ret < 0) - goto out; - info->ocv = ret; - ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG); if (ret < 0) goto out; @@ -261,6 +273,7 @@ static int fuel_gauge_update_registers(struct axp288_fg_info *info) goto out; info->fg_des_cap1 = ret; +out_no_current_sense_res: info->last_updated = jiffies; info->valid = 1; ret = 0; @@ -293,7 +306,7 @@ static void fuel_gauge_get_status(struct axp288_fg_info *info) * When this happens the AXP288 reports a not-charging status and * 0 mA discharge current. */ - if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR)) + if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR) || no_current_sense_res) goto not_full; if (curr == 0) { @@ -477,7 +490,9 @@ static irqreturn_t fuel_gauge_thread_handler(int irq, void *dev) dev_warn(info->dev, "Spurious Interrupt!!!\n"); } + mutex_lock(&info->lock); info->valid = 0; /* Force updating of the cached registers */ + mutex_unlock(&info->lock); power_supply_changed(info->bat); return IRQ_HANDLED; @@ -487,11 +502,13 @@ static void fuel_gauge_external_power_changed(struct power_supply *psy) { struct axp288_fg_info *info = power_supply_get_drvdata(psy); + mutex_lock(&info->lock); info->valid = 0; /* Force updating of the cached registers */ + mutex_unlock(&info->lock); power_supply_changed(info->bat); } -static const struct power_supply_desc fuel_gauge_desc = { +static struct power_supply_desc fuel_gauge_desc = { .name = DEV_NAME, .type = POWER_SUPPLY_TYPE_BATTERY, .properties = fuel_gauge_props, @@ -502,38 +519,6 @@ static const struct power_supply_desc fuel_gauge_desc = { .external_power_changed = fuel_gauge_external_power_changed, }; -static void fuel_gauge_init_irq(struct axp288_fg_info *info, struct platform_device *pdev) -{ - int ret, i, pirq; - - for (i = 0; i < AXP288_FG_INTR_NUM; i++) { - pirq = platform_get_irq(pdev, i); - info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); - if (info->irq[i] < 0) { - dev_warn(info->dev, "regmap_irq get virq failed for IRQ %d: %d\n", - pirq, info->irq[i]); - info->irq[i] = -1; - goto intr_failed; - } - ret = request_threaded_irq(info->irq[i], - NULL, fuel_gauge_thread_handler, - IRQF_ONESHOT, DEV_NAME, info); - if (ret) { - dev_warn(info->dev, "request irq failed for IRQ %d: %d\n", - pirq, info->irq[i]); - info->irq[i] = -1; - goto intr_failed; - } - } - return; - -intr_failed: - for (; i > 0; i--) { - free_irq(info->irq[i - 1], info); - info->irq[i - 1] = -1; - } -} - /* * Some devices have no battery (HDMI sticks) and the axp288 battery's * detection reports one despite it not being there. @@ -561,12 +546,6 @@ static const struct dmi_system_id axp288_no_battery_list[] = { }, }, { - /* ECS EF20EA */ - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), - }, - }, - { /* Intel Cherry Trail Compute Stick, Windows version */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Intel"), @@ -611,9 +590,73 @@ static const struct dmi_system_id axp288_no_battery_list[] = { {} }; +static int axp288_fuel_gauge_read_initial_regs(struct axp288_fg_info *info) +{ + unsigned int val; + int ret; + + /* + * On some devices the fuelgauge and charger parts of the axp288 are + * not used, check that the fuelgauge is enabled (CC_CTRL != 0). + */ + ret = regmap_read(info->regmap, AXP20X_CC_CTRL, &val); + if (ret < 0) + return ret; + if (val == 0) + return -ENODEV; + + ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); + if (ret < 0) + return ret; + + if (!(ret & FG_DES_CAP1_VALID)) { + dev_err(info->dev, "axp288 not configured by firmware\n"); + return -ENODEV; + } + + ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1); + if (ret < 0) + return ret; + switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) { + case CHRG_CCCV_CV_4100MV: + info->max_volt = 4100; + break; + case CHRG_CCCV_CV_4150MV: + info->max_volt = 4150; + break; + case CHRG_CCCV_CV_4200MV: + info->max_volt = 4200; + break; + case CHRG_CCCV_CV_4350MV: + info->max_volt = 4350; + break; + } + + ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE); + if (ret < 0) + return ret; + info->pwr_op = ret; + + ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG); + if (ret < 0) + return ret; + info->low_cap = ret; + + return 0; +} + +static void axp288_fuel_gauge_release_iio_chans(void *data) +{ + struct axp288_fg_info *info = data; + int i; + + for (i = 0; i < IIO_CHANNEL_NUM; i++) + if (!IS_ERR_OR_NULL(info->iio_channel[i])) + iio_channel_release(info->iio_channel[i]); +} + static int axp288_fuel_gauge_probe(struct platform_device *pdev) { - int i, ret = 0; struct axp288_fg_info *info; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); struct power_supply_config psy_cfg = {}; @@ -622,18 +665,25 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev) [BAT_D_CURR] = "axp288-chrg-d-curr", [BAT_VOLT] = "axp288-batt-volt", }; - unsigned int val; + struct device *dev = &pdev->dev; + int i, pirq, ret; + + /* + * Normally the native AXP288 fg/charger drivers are preferred but + * on some devices the ACPI drivers should be used instead. + */ + if (!acpi_quirk_skip_acpi_ac_and_battery()) + return -ENODEV; if (dmi_check_system(axp288_no_battery_list)) return -ENODEV; - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; - info->dev = &pdev->dev; + info->dev = dev; info->regmap = axp20x->regmap; - info->regmap_irqc = axp20x->regmap_irqc; info->status = POWER_SUPPLY_STATUS_UNKNOWN; info->valid = 0; @@ -641,6 +691,15 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev) mutex_init(&info->lock); + for (i = 0; i < AXP288_FG_INTR_NUM; i++) { + pirq = platform_get_irq(pdev, i); + ret = regmap_irq_get_virq(axp20x->regmap_irqc, pirq); + if (ret < 0) + return dev_err_probe(dev, ret, "getting vIRQ %d\n", pirq); + + info->irq[i] = ret; + } + for (i = 0; i < IIO_CHANNEL_NUM; i++) { /* * Note cannot use devm_iio_channel_get because x86 systems @@ -651,94 +710,48 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev) iio_channel_get(NULL, iio_chan_name[i]); if (IS_ERR(info->iio_channel[i])) { ret = PTR_ERR(info->iio_channel[i]); - dev_dbg(&pdev->dev, "error getting iiochan %s: %d\n", - iio_chan_name[i], ret); + dev_dbg(dev, "error getting iiochan %s: %d\n", iio_chan_name[i], ret); /* Wait for axp288_adc to load */ if (ret == -ENODEV) ret = -EPROBE_DEFER; - goto out_free_iio_chan; + axp288_fuel_gauge_release_iio_chans(info); + return ret; } } - ret = iosf_mbi_block_punit_i2c_access(); - if (ret < 0) - goto out_free_iio_chan; - - /* - * On some devices the fuelgauge and charger parts of the axp288 are - * not used, check that the fuelgauge is enabled (CC_CTRL != 0). - */ - ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val); - if (ret < 0) - goto unblock_punit_i2c_access; - if (val == 0) { - ret = -ENODEV; - goto unblock_punit_i2c_access; - } - - ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); - if (ret < 0) - goto unblock_punit_i2c_access; - - if (!(ret & FG_DES_CAP1_VALID)) { - dev_err(&pdev->dev, "axp288 not configured by firmware\n"); - ret = -ENODEV; - goto unblock_punit_i2c_access; - } - - ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1); - if (ret < 0) - goto unblock_punit_i2c_access; - switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) { - case CHRG_CCCV_CV_4100MV: - info->max_volt = 4100; - break; - case CHRG_CCCV_CV_4150MV: - info->max_volt = 4150; - break; - case CHRG_CCCV_CV_4200MV: - info->max_volt = 4200; - break; - case CHRG_CCCV_CV_4350MV: - info->max_volt = 4350; - break; - } - - ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE); - if (ret < 0) - goto unblock_punit_i2c_access; - info->pwr_op = ret; + ret = devm_add_action_or_reset(dev, axp288_fuel_gauge_release_iio_chans, info); + if (ret) + return ret; - ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG); + ret = iosf_mbi_block_punit_i2c_access(); if (ret < 0) - goto unblock_punit_i2c_access; - info->low_cap = ret; + return ret; -unblock_punit_i2c_access: + ret = axp288_fuel_gauge_read_initial_regs(info); iosf_mbi_unblock_punit_i2c_access(); - /* In case we arrive here by goto because of a register access error */ if (ret < 0) - goto out_free_iio_chan; + return ret; psy_cfg.drv_data = info; - info->bat = power_supply_register(&pdev->dev, &fuel_gauge_desc, &psy_cfg); + if (no_current_sense_res) + fuel_gauge_desc.num_properties = ARRAY_SIZE(fuel_gauge_props) - 3; + info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg); if (IS_ERR(info->bat)) { ret = PTR_ERR(info->bat); - dev_err(&pdev->dev, "failed to register battery: %d\n", ret); - goto out_free_iio_chan; + dev_err(dev, "failed to register battery: %d\n", ret); + return ret; } - fuel_gauge_init_irq(info, pdev); + for (i = 0; i < AXP288_FG_INTR_NUM; i++) { + ret = devm_request_threaded_irq(dev, info->irq[i], NULL, + fuel_gauge_thread_handler, + IRQF_ONESHOT, DEV_NAME, info); + if (ret) + return dev_err_probe(dev, ret, "requesting IRQ %d\n", info->irq[i]); + } return 0; - -out_free_iio_chan: - for (i = 0; i < IIO_CHANNEL_NUM; i++) - if (!IS_ERR_OR_NULL(info->iio_channel[i])) - iio_channel_release(info->iio_channel[i]); - - return ret; } static const struct platform_device_id axp288_fg_id_table[] = { @@ -747,26 +760,8 @@ static const struct platform_device_id axp288_fg_id_table[] = { }; MODULE_DEVICE_TABLE(platform, axp288_fg_id_table); -static int axp288_fuel_gauge_remove(struct platform_device *pdev) -{ - struct axp288_fg_info *info = platform_get_drvdata(pdev); - int i; - - power_supply_unregister(info->bat); - - for (i = 0; i < AXP288_FG_INTR_NUM; i++) - if (info->irq[i] >= 0) - free_irq(info->irq[i], info); - - for (i = 0; i < IIO_CHANNEL_NUM; i++) - iio_channel_release(info->iio_channel[i]); - - return 0; -} - static struct platform_driver axp288_fuel_gauge_driver = { .probe = axp288_fuel_gauge_probe, - .remove = axp288_fuel_gauge_remove, .id_table = axp288_fg_id_table, .driver = { .name = DEV_NAME, diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index 06c34b09349c..aa1a589eb9f2 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -39,6 +39,7 @@ #define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0 #define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1 #define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2 +#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3 #define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) #define BQ24190_REG_POC_SYS_MIN_SHIFT 1 #define BQ24190_REG_POC_SYS_MIN_MIN 3000 @@ -162,15 +163,24 @@ struct bq24190_dev_info { char model_name[I2C_NAME_SIZE]; bool initialized; bool irq_event; + bool otg_vbus_enabled; + int charge_type; u16 sys_min; u16 iprechg; u16 iterm; + u32 ichg; + u32 ichg_max; + u32 vreg; + u32 vreg_max; struct mutex f_reg_lock; u8 f_reg; u8 ss_reg; u8 watchdog; }; +static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, + const union power_supply_propval *val); + static const unsigned int bq24190_usb_extcon_cable[] = { EXTCON_USB, EXTCON_NONE, @@ -497,10 +507,9 @@ static ssize_t bq24190_sysfs_store(struct device *dev, } #endif -#ifdef CONFIG_REGULATOR -static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val) +static int bq24190_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable) { - struct bq24190_dev_info *bdi = rdev_get_drvdata(dev); + union power_supply_propval val = { .intval = bdi->charge_type }; int ret; ret = pm_runtime_get_sync(bdi->dev); @@ -510,9 +519,14 @@ static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val) return ret; } - ret = bq24190_write_mask(bdi, BQ24190_REG_POC, - BQ24190_REG_POC_CHG_CONFIG_MASK, - BQ24190_REG_POC_CHG_CONFIG_SHIFT, val); + bdi->otg_vbus_enabled = enable; + if (enable) + ret = bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, + BQ24190_REG_POC_CHG_CONFIG_OTG); + else + ret = bq24190_charger_set_charge_type(bdi, &val); pm_runtime_mark_last_busy(bdi->dev); pm_runtime_put_autosuspend(bdi->dev); @@ -520,14 +534,15 @@ static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val) return ret; } +#ifdef CONFIG_REGULATOR static int bq24190_vbus_enable(struct regulator_dev *dev) { - return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG); + return bq24190_set_otg_vbus(rdev_get_drvdata(dev), true); } static int bq24190_vbus_disable(struct regulator_dev *dev) { - return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE); + return bq24190_set_otg_vbus(rdev_get_drvdata(dev), false); } static int bq24190_vbus_is_enabled(struct regulator_dev *dev) @@ -550,7 +565,12 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev) pm_runtime_mark_last_busy(bdi->dev); pm_runtime_put_autosuspend(bdi->dev); - return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG; + if (ret) + return ret; + + bdi->otg_vbus_enabled = (val == BQ24190_REG_POC_CHG_CONFIG_OTG || + val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT); + return bdi->otg_vbus_enabled; } static const struct regulator_ops bq24190_vbus_ops = { @@ -659,6 +679,28 @@ static int bq24190_set_config(struct bq24190_dev_info *bdi) return ret; } + if (bdi->ichg) { + ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, + BQ24190_REG_CCC_ICHG_MASK, + BQ24190_REG_CCC_ICHG_SHIFT, + bq24190_ccc_ichg_values, + ARRAY_SIZE(bq24190_ccc_ichg_values), + bdi->ichg); + if (ret < 0) + return ret; + } + + if (bdi->vreg) { + ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, + BQ24190_REG_CVC_VREG_MASK, + BQ24190_REG_CVC_VREG_SHIFT, + bq24190_cvc_vreg_values, + ARRAY_SIZE(bq24190_cvc_vreg_values), + bdi->vreg); + if (ret < 0) + return ret; + } + return 0; } @@ -775,6 +817,14 @@ static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, return -EINVAL; } + bdi->charge_type = val->intval; + /* + * If the 5V Vbus boost regulator is enabled delay setting + * the charge-type until its gets disabled. + */ + if (bdi->otg_vbus_enabled) + return 0; + if (chg_config) { /* Enabling the charger */ ret = bq24190_write_mask(bdi, BQ24190_REG_CCC, BQ24190_REG_CCC_FORCE_20PCT_MASK, @@ -976,15 +1026,6 @@ static int bq24190_charger_get_current(struct bq24190_dev_info *bdi, return 0; } -static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi, - union power_supply_propval *val) -{ - int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1; - - val->intval = bq24190_ccc_ichg_values[idx]; - return 0; -} - static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, const union power_supply_propval *val) { @@ -1001,10 +1042,19 @@ static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, if (v) curr *= 5; - return bq24190_set_field_val(bdi, BQ24190_REG_CCC, + if (curr > bdi->ichg_max) + return -EINVAL; + + ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, bq24190_ccc_ichg_values, ARRAY_SIZE(bq24190_ccc_ichg_values), curr); + if (ret < 0) + return ret; + + bdi->ichg = curr; + + return 0; } static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, @@ -1023,22 +1073,24 @@ static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, return 0; } -static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi, - union power_supply_propval *val) -{ - int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; - - val->intval = bq24190_cvc_vreg_values[idx]; - return 0; -} - static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi, const union power_supply_propval *val) { - return bq24190_set_field_val(bdi, BQ24190_REG_CVC, + int ret; + + if (val->intval > bdi->vreg_max) + return -EINVAL; + + ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, bq24190_cvc_vreg_values, ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval); + if (ret < 0) + return ret; + + bdi->vreg = val->intval; + + return 0; } static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi, @@ -1108,13 +1160,15 @@ static int bq24190_charger_get_property(struct power_supply *psy, ret = bq24190_charger_get_current(bdi, val); break; case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: - ret = bq24190_charger_get_current_max(bdi, val); + val->intval = bdi->ichg_max; + ret = 0; break; case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: ret = bq24190_charger_get_voltage(bdi, val); break; case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: - ret = bq24190_charger_get_voltage_max(bdi, val); + val->intval = bdi->vreg_max; + ret = 0; break; case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: ret = bq24190_charger_get_iinlimit(bdi, val); @@ -1206,8 +1260,18 @@ static void bq24190_input_current_limit_work(struct work_struct *work) struct bq24190_dev_info *bdi = container_of(work, struct bq24190_dev_info, input_current_limit_work.work); + union power_supply_propval val; + int ret; - power_supply_set_input_current_limit_from_supplier(bdi->charger); + ret = power_supply_get_property_from_supplier(bdi->charger, + POWER_SUPPLY_PROP_CURRENT_MAX, + &val); + if (ret) + return; + + bq24190_charger_set_property(bdi->charger, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, + &val); } /* Sync the input-current-limit with our parent supply (if we have one) */ @@ -1671,7 +1735,13 @@ static int bq24190_get_config(struct bq24190_dev_info *bdi) { const char * const s = "ti,system-minimum-microvolt"; struct power_supply_battery_info *info; - int v; + int v, idx; + + idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1; + bdi->ichg_max = bq24190_ccc_ichg_values[idx]; + + idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; + bdi->vreg_max = bq24190_cvc_vreg_values[idx]; if (device_property_read_u32(bdi->dev, s, &v) == 0) { v /= 1000; @@ -1682,8 +1752,7 @@ static int bq24190_get_config(struct bq24190_dev_info *bdi) dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v); } - if (bdi->dev->of_node && - !power_supply_get_battery_info(bdi->charger, &info)) { + if (!power_supply_get_battery_info(bdi->charger, &info)) { v = info->precharge_current_ua / 1000; if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN && v <= BQ24190_REG_PCTCC_IPRECHG_MAX) @@ -1699,6 +1768,15 @@ static int bq24190_get_config(struct bq24190_dev_info *bdi) else dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n", v); + + /* These are optional, so no warning when not set */ + v = info->constant_charge_current_max_ua; + if (v >= bq24190_ccc_ichg_values[0] && v <= bdi->ichg_max) + bdi->ichg = bdi->ichg_max = v; + + v = info->constant_charge_voltage_max_uv; + if (v >= bq24190_cvc_vreg_values[0] && v <= bdi->vreg_max) + bdi->vreg = bdi->vreg_max = v; } return 0; @@ -1728,6 +1806,7 @@ static int bq24190_probe(struct i2c_client *client, bdi->dev = dev; strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); mutex_init(&bdi->f_reg_lock); + bdi->charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST; bdi->f_reg = 0; bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ INIT_DELAYED_WORK(&bdi->input_current_limit_work, @@ -1860,6 +1939,14 @@ static int bq24190_remove(struct i2c_client *client) return 0; } +static void bq24190_shutdown(struct i2c_client *client) +{ + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + /* Turn off 5V boost regulator on shutdown */ + bq24190_set_otg_vbus(bdi, false); +} + static __maybe_unused int bq24190_runtime_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -1970,6 +2057,7 @@ MODULE_DEVICE_TABLE(of, bq24190_of_match); static struct i2c_driver bq24190_driver = { .probe = bq24190_probe, .remove = bq24190_remove, + .shutdown = bq24190_shutdown, .id_table = bq24190_i2c_ids, .driver = { .name = "bq24190-charger", diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index e62da9dc4f35..852a6fec4339 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -8,7 +8,9 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/power_supply.h> +#include <linux/power/bq25890_charger.h> #include <linux/regmap.h> +#include <linux/regulator/driver.h> #include <linux/types.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> @@ -25,6 +27,10 @@ #define BQ25895_ID 7 #define BQ25896_ID 0 +#define PUMP_EXPRESS_START_DELAY (5 * HZ) +#define PUMP_EXPRESS_MAX_TRIES 6 +#define PUMP_EXPRESS_VBUS_MARGIN_uV 1000000 + enum bq25890_chip_version { BQ25890, BQ25892, @@ -40,7 +46,7 @@ static const char *const bq25890_chip_name[] = { }; enum bq25890_fields { - F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */ + F_EN_HIZ, F_EN_ILIM, F_IINLIM, /* Reg00 */ F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */ F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN, F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN, /* Reg02 */ @@ -94,6 +100,7 @@ struct bq25890_state { u8 vsys_status; u8 boost_fault; u8 bat_fault; + u8 ntc_fault; }; struct bq25890_device { @@ -104,11 +111,15 @@ struct bq25890_device { struct usb_phy *usb_phy; struct notifier_block usb_nb; struct work_struct usb_work; + struct delayed_work pump_express_work; unsigned long usb_event; struct regmap *rmap; struct regmap_field *rmap_fields[F_MAX_FIELDS]; + bool skip_reset; + bool read_back_init_data; + u32 pump_express_vbus_max; enum bq25890_chip_version chip_version; struct bq25890_init_data init_data; struct bq25890_state state; @@ -153,7 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = { /* REG00 */ [F_EN_HIZ] = REG_FIELD(0x00, 7, 7), [F_EN_ILIM] = REG_FIELD(0x00, 6, 6), - [F_IILIM] = REG_FIELD(0x00, 0, 5), + [F_IINLIM] = REG_FIELD(0x00, 0, 5), /* REG01 */ [F_BHOT] = REG_FIELD(0x01, 6, 7), [F_BCOLD] = REG_FIELD(0x01, 5, 5), @@ -256,10 +267,11 @@ enum bq25890_table_ids { /* range tables */ TBL_ICHG, TBL_ITERM, - TBL_IILIM, + TBL_IINLIM, TBL_VREG, TBL_BOOSTV, TBL_SYSVMIN, + TBL_VBUSV, TBL_VBATCOMP, TBL_RBATCOMP, @@ -320,14 +332,15 @@ static const union { } bq25890_tables[] = { /* range tables */ /* TODO: BQ25896 has max ICHG 3008 mA */ - [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ - [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ - [TBL_IILIM] = { .rt = {100000, 3250000, 50000} }, /* uA */ - [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ - [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ - [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ - [TBL_VBATCOMP] ={ .rt = {0, 224000, 32000} }, /* uV */ - [TBL_RBATCOMP] ={ .rt = {0, 140000, 20000} }, /* uOhm */ + [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ + [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ + [TBL_IINLIM] = { .rt = {100000, 3250000, 50000} }, /* uA */ + [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ + [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ + [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ + [TBL_VBUSV] = { .rt = {2600000, 15300000, 100000} }, /* uV */ + [TBL_VBATCOMP] = { .rt = {0, 224000, 32000} }, /* uV */ + [TBL_RBATCOMP] = { .rt = {0, 140000, 20000} }, /* uOhm */ /* lookup tables */ [TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} }, @@ -407,6 +420,14 @@ enum bq25890_chrg_fault { CHRG_FAULT_TIMER_EXPIRED, }; +enum bq25890_ntc_fault { + NTC_FAULT_NORMAL = 0, + NTC_FAULT_WARM = 2, + NTC_FAULT_COOL = 3, + NTC_FAULT_COLD = 5, + NTC_FAULT_HOT = 6, +}; + static bool bq25890_is_adc_property(enum power_supply_property psp) { switch (psp) { @@ -422,6 +443,17 @@ static bool bq25890_is_adc_property(enum power_supply_property psp) static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq); +static int bq25890_get_vbus_voltage(struct bq25890_device *bq) +{ + int ret; + + ret = bq25890_field_read(bq, F_VBUSV); + if (ret < 0) + return ret; + + return bq25890_find_val(ret, TBL_VBUSV); +} + static int bq25890_power_supply_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -499,6 +531,18 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG); + + /* When temperature is too low, charge current is decreased */ + if (bq->state.ntc_fault == NTC_FAULT_COOL) { + ret = bq25890_field_read(bq, F_JEITA_ISET); + if (ret < 0) + return ret; + + if (ret) + val->intval /= 5; + else + val->intval /= 2; + } break; case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: @@ -528,11 +572,11 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: - ret = bq25890_field_read(bq, F_IILIM); + ret = bq25890_field_read(bq, F_IINLIM); if (ret < 0) return ret; - val->intval = bq25890_find_val(ret, TBL_IILIM); + val->intval = bq25890_find_val(ret, TBL_IINLIM); break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: @@ -569,6 +613,43 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, return 0; } +/* On the BQ25892 try to get charger-type info from our supplier */ +static void bq25890_charger_external_power_changed(struct power_supply *psy) +{ + struct bq25890_device *bq = power_supply_get_drvdata(psy); + union power_supply_propval val; + int input_current_limit, ret; + + if (bq->chip_version != BQ25892) + return; + + ret = power_supply_get_property_from_supplier(bq->charger, + POWER_SUPPLY_PROP_USB_TYPE, + &val); + if (ret) + return; + + switch (val.intval) { + case POWER_SUPPLY_USB_TYPE_DCP: + input_current_limit = bq25890_find_idx(2000000, TBL_IINLIM); + if (bq->pump_express_vbus_max) { + queue_delayed_work(system_power_efficient_wq, + &bq->pump_express_work, + PUMP_EXPRESS_START_DELAY); + } + break; + case POWER_SUPPLY_USB_TYPE_CDP: + case POWER_SUPPLY_USB_TYPE_ACA: + input_current_limit = bq25890_find_idx(1500000, TBL_IINLIM); + break; + case POWER_SUPPLY_USB_TYPE_SDP: + default: + input_current_limit = bq25890_find_idx(500000, TBL_IINLIM); + } + + bq25890_field_write(bq, F_IINLIM, input_current_limit); +} + static int bq25890_get_chip_state(struct bq25890_device *bq, struct bq25890_state *state) { @@ -583,7 +664,8 @@ static int bq25890_get_chip_state(struct bq25890_device *bq, {F_VSYS_STAT, &state->vsys_status}, {F_BOOST_FAULT, &state->boost_fault}, {F_BAT_FAULT, &state->bat_fault}, - {F_CHG_FAULT, &state->chrg_fault} + {F_CHG_FAULT, &state->chrg_fault}, + {F_NTC_FAULT, &state->ntc_fault} }; for (i = 0; i < ARRAY_SIZE(state_fields); i++) { @@ -594,9 +676,10 @@ static int bq25890_get_chip_state(struct bq25890_device *bq, *state_fields[i].data = ret; } - dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n", + dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT/NTC=%d/%d/%d/%d\n", state->chrg_status, state->online, state->vsys_status, - state->chrg_fault, state->boost_fault, state->bat_fault); + state->chrg_fault, state->boost_fault, state->bat_fault, + state->ntc_fault); return 0; } @@ -670,33 +753,69 @@ static int bq25890_chip_reset(struct bq25890_device *bq) return 0; } -static int bq25890_hw_init(struct bq25890_device *bq) +static int bq25890_rw_init_data(struct bq25890_device *bq) { + bool write = !bq->read_back_init_data; int ret; int i; const struct { enum bq25890_fields id; - u32 value; + u8 *value; } init_data[] = { - {F_ICHG, bq->init_data.ichg}, - {F_VREG, bq->init_data.vreg}, - {F_ITERM, bq->init_data.iterm}, - {F_IPRECHG, bq->init_data.iprechg}, - {F_SYSVMIN, bq->init_data.sysvmin}, - {F_BOOSTV, bq->init_data.boostv}, - {F_BOOSTI, bq->init_data.boosti}, - {F_BOOSTF, bq->init_data.boostf}, - {F_EN_ILIM, bq->init_data.ilim_en}, - {F_TREG, bq->init_data.treg}, - {F_BATCMP, bq->init_data.rbatcomp}, - {F_VCLAMP, bq->init_data.vclamp}, + {F_ICHG, &bq->init_data.ichg}, + {F_VREG, &bq->init_data.vreg}, + {F_ITERM, &bq->init_data.iterm}, + {F_IPRECHG, &bq->init_data.iprechg}, + {F_SYSVMIN, &bq->init_data.sysvmin}, + {F_BOOSTV, &bq->init_data.boostv}, + {F_BOOSTI, &bq->init_data.boosti}, + {F_BOOSTF, &bq->init_data.boostf}, + {F_EN_ILIM, &bq->init_data.ilim_en}, + {F_TREG, &bq->init_data.treg}, + {F_BATCMP, &bq->init_data.rbatcomp}, + {F_VCLAMP, &bq->init_data.vclamp}, }; - ret = bq25890_chip_reset(bq); - if (ret < 0) { - dev_dbg(bq->dev, "Reset failed %d\n", ret); - return ret; + for (i = 0; i < ARRAY_SIZE(init_data); i++) { + if (write) { + ret = bq25890_field_write(bq, init_data[i].id, + *init_data[i].value); + } else { + ret = bq25890_field_read(bq, init_data[i].id); + if (ret >= 0) + *init_data[i].value = ret; + } + if (ret < 0) { + dev_dbg(bq->dev, "Accessing init data failed %d\n", ret); + return ret; + } + } + + return 0; +} + +static int bq25890_hw_init(struct bq25890_device *bq) +{ + int ret; + + if (!bq->skip_reset) { + ret = bq25890_chip_reset(bq); + if (ret < 0) { + dev_dbg(bq->dev, "Reset failed %d\n", ret); + return ret; + } + } else { + /* + * Ensure charging is enabled, on some boards where the fw + * takes care of initalizition F_CHG_CFG is set to 0 before + * handing control over to the OS. + */ + ret = bq25890_field_write(bq, F_CHG_CFG, 1); + if (ret < 0) { + dev_dbg(bq->dev, "Enabling charging failed %d\n", ret); + return ret; + } } /* disable watchdog */ @@ -707,14 +826,9 @@ static int bq25890_hw_init(struct bq25890_device *bq) } /* initialize currents/voltages and other parameters */ - for (i = 0; i < ARRAY_SIZE(init_data); i++) { - ret = bq25890_field_write(bq, init_data[i].id, - init_data[i].value); - if (ret < 0) { - dev_dbg(bq->dev, "Writing init data failed %d\n", ret); - return ret; - } - } + ret = bq25890_rw_init_data(bq); + if (ret) + return ret; ret = bq25890_get_chip_state(bq, &bq->state); if (ret < 0) { @@ -760,6 +874,7 @@ static const struct power_supply_desc bq25890_power_supply_desc = { .properties = bq25890_power_supply_props, .num_properties = ARRAY_SIZE(bq25890_power_supply_props), .get_property = bq25890_power_supply_get_property, + .external_power_changed = bq25890_charger_external_power_changed, }; static int bq25890_power_supply_init(struct bq25890_device *bq) @@ -776,6 +891,64 @@ static int bq25890_power_supply_init(struct bq25890_device *bq) return PTR_ERR_OR_ZERO(bq->charger); } +static int bq25890_set_otg_cfg(struct bq25890_device *bq, u8 val) +{ + int ret; + + ret = bq25890_field_write(bq, F_OTG_CFG, val); + if (ret < 0) + dev_err(bq->dev, "Error switching to boost/charger mode: %d\n", ret); + + return ret; +} + +static void bq25890_pump_express_work(struct work_struct *data) +{ + struct bq25890_device *bq = + container_of(data, struct bq25890_device, pump_express_work.work); + int voltage, i, ret; + + dev_dbg(bq->dev, "Start to request input voltage increasing\n"); + + /* Enable current pulse voltage control protocol */ + ret = bq25890_field_write(bq, F_PUMPX_EN, 1); + if (ret < 0) + goto error_print; + + for (i = 0; i < PUMP_EXPRESS_MAX_TRIES; i++) { + voltage = bq25890_get_vbus_voltage(bq); + if (voltage < 0) + goto error_print; + dev_dbg(bq->dev, "input voltage = %d uV\n", voltage); + + if ((voltage + PUMP_EXPRESS_VBUS_MARGIN_uV) > + bq->pump_express_vbus_max) + break; + + ret = bq25890_field_write(bq, F_PUMPX_UP, 1); + if (ret < 0) + goto error_print; + + /* Note a single PUMPX up pulse-sequence takes 2.1s */ + ret = regmap_field_read_poll_timeout(bq->rmap_fields[F_PUMPX_UP], + ret, !ret, 100000, 3000000); + if (ret < 0) + goto error_print; + + /* Make sure ADC has sampled Vbus before checking again */ + msleep(1000); + } + + bq25890_field_write(bq, F_PUMPX_EN, 0); + + dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n", + voltage); + + return; +error_print: + dev_err(bq->dev, "Failed to request hi-voltage charging\n"); +} + static void bq25890_usb_work(struct work_struct *data) { int ret; @@ -785,25 +958,16 @@ static void bq25890_usb_work(struct work_struct *data) switch (bq->usb_event) { case USB_EVENT_ID: /* Enable boost mode */ - ret = bq25890_field_write(bq, F_OTG_CFG, 1); - if (ret < 0) - goto error; + bq25890_set_otg_cfg(bq, 1); break; case USB_EVENT_NONE: /* Disable boost mode */ - ret = bq25890_field_write(bq, F_OTG_CFG, 0); - if (ret < 0) - goto error; - - power_supply_changed(bq->charger); + ret = bq25890_set_otg_cfg(bq, 0); + if (ret == 0) + power_supply_changed(bq->charger); break; } - - return; - -error: - dev_err(bq->dev, "Error switching to boost/charger mode.\n"); } static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val, @@ -818,6 +982,45 @@ static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val, return NOTIFY_OK; } +#ifdef CONFIG_REGULATOR +static int bq25890_vbus_enable(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_set_otg_cfg(bq, 1); +} + +static int bq25890_vbus_disable(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_set_otg_cfg(bq, 0); +} + +static int bq25890_vbus_is_enabled(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_field_read(bq, F_OTG_CFG); +} + +static const struct regulator_ops bq25890_vbus_ops = { + .enable = bq25890_vbus_enable, + .disable = bq25890_vbus_disable, + .is_enabled = bq25890_vbus_is_enabled, +}; + +static const struct regulator_desc bq25890_vbus_desc = { + .name = "usb_otg_vbus", + .of_match = "usb-otg-vbus", + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .ops = &bq25890_vbus_ops, + .fixed_uV = 5000000, + .n_voltages = 1, +}; +#endif + static int bq25890_get_chip_version(struct bq25890_device *bq) { int id, rev; @@ -936,6 +1139,16 @@ static int bq25890_fw_probe(struct bq25890_device *bq) int ret; struct bq25890_init_data *init = &bq->init_data; + /* Optional, left at 0 if property is not present */ + device_property_read_u32(bq->dev, "linux,pump-express-vbus-max", + &bq->pump_express_vbus_max); + + bq->skip_reset = device_property_read_bool(bq->dev, "linux,skip-reset"); + bq->read_back_init_data = device_property_read_bool(bq->dev, + "linux,read-back-settings"); + if (bq->read_back_init_data) + return 0; + ret = bq25890_fw_read_u32_props(bq); if (ret < 0) return ret; @@ -952,7 +1165,6 @@ static int bq25890_probe(struct i2c_client *client, struct device *dev = &client->dev; struct bq25890_device *bq; int ret; - int i; bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); if (!bq) @@ -962,21 +1174,17 @@ static int bq25890_probe(struct i2c_client *client, bq->dev = dev; mutex_init(&bq->lock); + INIT_DELAYED_WORK(&bq->pump_express_work, bq25890_pump_express_work); bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config); if (IS_ERR(bq->rmap)) return dev_err_probe(dev, PTR_ERR(bq->rmap), "failed to allocate register map\n"); - for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) { - const struct reg_field *reg_fields = bq25890_reg_fields; - - bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap, - reg_fields[i]); - if (IS_ERR(bq->rmap_fields[i])) - return dev_err_probe(dev, PTR_ERR(bq->rmap_fields[i]), - "cannot allocate regmap field\n"); - } + ret = devm_regmap_field_bulk_alloc(dev, bq->rmap, bq->rmap_fields, + bq25890_reg_fields, F_MAX_FIELDS); + if (ret) + return ret; i2c_set_clientdata(client, bq); @@ -986,16 +1194,9 @@ static int bq25890_probe(struct i2c_client *client, return ret; } - if (!dev->platform_data) { - ret = bq25890_fw_probe(bq); - if (ret < 0) { - dev_err(dev, "Cannot read device properties: %d\n", - ret); - return ret; - } - } else { - return -ENODEV; - } + ret = bq25890_fw_probe(bq); + if (ret < 0) + return dev_err_probe(dev, ret, "reading device properties\n"); ret = bq25890_hw_init(bq); if (ret < 0) { @@ -1018,6 +1219,22 @@ static int bq25890_probe(struct i2c_client *client, bq->usb_nb.notifier_call = bq25890_usb_notifier; usb_register_notifier(bq->usb_phy, &bq->usb_nb); } +#ifdef CONFIG_REGULATOR + else { + struct bq25890_platform_data *pdata = dev_get_platdata(dev); + struct regulator_config cfg = { }; + struct regulator_dev *reg; + + cfg.dev = dev; + cfg.driver_data = bq; + if (pdata) + cfg.init_data = pdata->regulator_init_data; + + reg = devm_regulator_register(dev, &bq25890_vbus_desc, &cfg); + if (IS_ERR(reg)) + return dev_err_probe(dev, PTR_ERR(reg), "registering regulator"); + } +#endif ret = bq25890_power_supply_init(bq); if (ret < 0) { @@ -1048,12 +1265,36 @@ static int bq25890_remove(struct i2c_client *client) if (!IS_ERR_OR_NULL(bq->usb_phy)) usb_unregister_notifier(bq->usb_phy, &bq->usb_nb); - /* reset all registers to default values */ - bq25890_chip_reset(bq); + if (!bq->skip_reset) { + /* reset all registers to default values */ + bq25890_chip_reset(bq); + } return 0; } +static void bq25890_shutdown(struct i2c_client *client) +{ + struct bq25890_device *bq = i2c_get_clientdata(client); + + /* + * TODO this if + return should probably be removed, but that would + * introduce a function change for boards using the usb-phy framework. + * This needs to be tested on such a board before making this change. + */ + if (!IS_ERR_OR_NULL(bq->usb_phy)) + return; + + /* + * Turn off the 5v Boost regulator which outputs Vbus to the device's + * Micro-USB or Type-C USB port. Leaving this on drains power and + * this avoids the PMIC on some device-models seeing this as Vbus + * getting inserted after shutdown, causing the device to immediately + * power-up again. + */ + bq25890_set_otg_cfg(bq, 0); +} + #ifdef CONFIG_PM_SLEEP static int bq25890_suspend(struct device *dev) { @@ -1133,6 +1374,7 @@ static struct i2c_driver bq25890_driver = { }, .probe = bq25890_probe, .remove = bq25890_remove, + .shutdown = bq25890_shutdown, .id_table = bq25890_i2c_ids, }; module_i2c_driver(bq25890_driver); diff --git a/drivers/power/supply/bq25980_charger.c b/drivers/power/supply/bq25980_charger.c index 9daa6d14db4d..9339f5649282 100644 --- a/drivers/power/supply/bq25980_charger.c +++ b/drivers/power/supply/bq25980_charger.c @@ -764,7 +764,7 @@ static int bq25980_get_charger_property(struct power_supply *psy, if (!state.ce) val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; else if (state.bypass) - val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + val->intval = POWER_SUPPLY_CHARGE_TYPE_BYPASS; else if (!state.bypass) val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD; break; diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c index 18e3ff0e15d5..ae284bdd6cc3 100644 --- a/drivers/power/supply/cpcap-battery.c +++ b/drivers/power/supply/cpcap-battery.c @@ -28,6 +28,7 @@ #include <linux/power_supply.h> #include <linux/reboot.h> #include <linux/regmap.h> +#include <linux/nvmem-consumer.h> #include <linux/moduleparam.h> #include <linux/iio/consumer.h> @@ -73,6 +74,9 @@ #define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS 250 +#define CPCAP_BATTERY_EB41_HW4X_ID 0x9E +#define CPCAP_BATTERY_BW8X_ID 0x98 + enum { CPCAP_BATTERY_IIO_BATTDET, CPCAP_BATTERY_IIO_VOLTAGE, @@ -138,6 +142,7 @@ struct cpcap_battery_ddata { int charge_full; int status; u16 vendor; + bool check_nvmem; unsigned int is_full:1; }; @@ -354,6 +359,88 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata, ccd->offset); } + +/* + * Based on the values from Motorola mapphone Linux kernel for the + * stock Droid 4 battery eb41. In the Motorola mapphone Linux + * kernel tree the value for pm_cd_factor is passed to the kernel + * via device tree. If it turns out to be something device specific + * we can consider that too later. These values are also fine for + * Bionic's hw4x. + * + * And looking at the battery full and shutdown values for the stock + * kernel on droid 4, full is 4351000 and software initiates shutdown + * at 3078000. The device will die around 2743000. + */ +static const struct cpcap_battery_config cpcap_battery_eb41_data = { + .cd_factor = 0x3cc, + .info.technology = POWER_SUPPLY_TECHNOLOGY_LION, + .info.voltage_max_design = 4351000, + .info.voltage_min_design = 3100000, + .info.charge_full_design = 1740000, + .bat.constant_charge_voltage_max_uv = 4200000, +}; + +/* Values for the extended Droid Bionic battery bw8x. */ +static const struct cpcap_battery_config cpcap_battery_bw8x_data = { + .cd_factor = 0x3cc, + .info.technology = POWER_SUPPLY_TECHNOLOGY_LION, + .info.voltage_max_design = 4200000, + .info.voltage_min_design = 3200000, + .info.charge_full_design = 2760000, + .bat.constant_charge_voltage_max_uv = 4200000, +}; + +/* + * Safe values for any lipo battery likely to fit into a mapphone + * battery bay. + */ +static const struct cpcap_battery_config cpcap_battery_unkown_data = { + .cd_factor = 0x3cc, + .info.technology = POWER_SUPPLY_TECHNOLOGY_LION, + .info.voltage_max_design = 4200000, + .info.voltage_min_design = 3200000, + .info.charge_full_design = 3000000, + .bat.constant_charge_voltage_max_uv = 4200000, +}; + +static int cpcap_battery_match_nvmem(struct device *dev, const void *data) +{ + if (strcmp(dev_name(dev), "89-500029ba0f73") == 0) + return 1; + else + return 0; +} + +static void cpcap_battery_detect_battery_type(struct cpcap_battery_ddata *ddata) +{ + struct nvmem_device *nvmem; + u8 battery_id = 0; + + ddata->check_nvmem = false; + + nvmem = nvmem_device_find(NULL, &cpcap_battery_match_nvmem); + if (IS_ERR_OR_NULL(nvmem)) { + ddata->check_nvmem = true; + dev_info_once(ddata->dev, "Can not find battery nvmem device. Assuming generic lipo battery\n"); + } else if (nvmem_device_read(nvmem, 2, 1, &battery_id) < 0) { + battery_id = 0; + ddata->check_nvmem = true; + dev_warn(ddata->dev, "Can not read battery nvmem device. Assuming generic lipo battery\n"); + } + + switch (battery_id) { + case CPCAP_BATTERY_EB41_HW4X_ID: + ddata->config = cpcap_battery_eb41_data; + break; + case CPCAP_BATTERY_BW8X_ID: + ddata->config = cpcap_battery_bw8x_data; + break; + default: + ddata->config = cpcap_battery_unkown_data; + } +} + /** * cpcap_battery_cc_get_avg_current - read cpcap coulumb counter * @ddata: cpcap battery driver device data @@ -571,6 +658,9 @@ static int cpcap_battery_get_property(struct power_supply *psy, latest = cpcap_battery_latest(ddata); previous = cpcap_battery_previous(ddata); + if (ddata->check_nvmem) + cpcap_battery_detect_battery_type(ddata); + switch (psp) { case POWER_SUPPLY_PROP_PRESENT: if (latest->temperature > CPCAP_NO_BATTERY || ignore_temperature_probe) @@ -982,30 +1072,10 @@ restore: return error; } -/* - * Based on the values from Motorola mapphone Linux kernel. In the - * the Motorola mapphone Linux kernel tree the value for pm_cd_factor - * is passed to the kernel via device tree. If it turns out to be - * something device specific we can consider that too later. - * - * And looking at the battery full and shutdown values for the stock - * kernel on droid 4, full is 4351000 and software initiates shutdown - * at 3078000. The device will die around 2743000. - */ -static const struct cpcap_battery_config cpcap_battery_default_data = { - .cd_factor = 0x3cc, - .info.technology = POWER_SUPPLY_TECHNOLOGY_LION, - .info.voltage_max_design = 4351000, - .info.voltage_min_design = 3100000, - .info.charge_full_design = 1740000, - .bat.constant_charge_voltage_max_uv = 4200000, -}; - #ifdef CONFIG_OF static const struct of_device_id cpcap_battery_id_table[] = { { .compatible = "motorola,cpcap-battery", - .data = &cpcap_battery_default_data, }, {}, }; @@ -1028,19 +1098,15 @@ static int cpcap_battery_probe(struct platform_device *pdev) struct cpcap_battery_ddata *ddata; struct power_supply_config psy_cfg = {}; int error; - const struct cpcap_battery_config *cfg; - - cfg = device_get_match_data(&pdev->dev); - if (!cfg) - return -ENODEV; ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; + cpcap_battery_detect_battery_type(ddata); + INIT_LIST_HEAD(&ddata->irq_list); ddata->dev = &pdev->dev; - memcpy(&ddata->config, cfg, sizeof(ddata->config)); ddata->reg = dev_get_regmap(ddata->dev->parent, NULL); if (!ddata->reg) diff --git a/drivers/power/supply/cros_peripheral_charger.c b/drivers/power/supply/cros_peripheral_charger.c index 305f10dfc06d..9fe6d826148d 100644 --- a/drivers/power/supply/cros_peripheral_charger.c +++ b/drivers/power/supply/cros_peripheral_charger.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/stringify.h> #include <linux/types.h> +#include <asm/unaligned.h> #define DRV_NAME "cros-ec-pchg" #define PCHG_DIR_PREFIX "peripheral" @@ -237,46 +238,22 @@ static int cros_pchg_event(const struct charger_data *charger, return NOTIFY_OK; } -static u32 cros_get_device_event(const struct charger_data *charger) -{ - struct ec_params_device_event req; - struct ec_response_device_event rsp; - struct device *dev = charger->dev; - int ret; - - req.param = EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS; - ret = cros_pchg_ec_command(charger, 0, EC_CMD_DEVICE_EVENT, - &req, sizeof(req), &rsp, sizeof(rsp)); - if (ret < 0) { - dev_warn(dev, "Unable to get device events (err:%d)\n", ret); - return 0; - } - - return rsp.event_mask; -} - static int cros_ec_notify(struct notifier_block *nb, unsigned long queued_during_suspend, void *data) { - struct cros_ec_device *ec_dev = (struct cros_ec_device *)data; - u32 host_event = cros_ec_get_host_event(ec_dev); + struct cros_ec_device *ec_dev = data; struct charger_data *charger = container_of(nb, struct charger_data, notifier); - u32 device_event_mask; + u32 host_event; - if (!host_event) + if (ec_dev->event_data.event_type != EC_MKBP_EVENT_PCHG || + ec_dev->event_size != sizeof(host_event)) return NOTIFY_DONE; - if (!(host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_DEVICE))) - return NOTIFY_DONE; + host_event = get_unaligned_le32(&ec_dev->event_data.data.host_event); - /* - * todo: Retrieve device event mask in common place - * (e.g. cros_ec_proto.c). - */ - device_event_mask = cros_get_device_event(charger); - if (!(device_event_mask & EC_DEVICE_EVENT_MASK(EC_DEVICE_EVENT_WLC))) + if (!(host_event & EC_MKBP_PCHG_DEVICE_EVENT)) return NOTIFY_DONE; return cros_pchg_event(charger, host_event); diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c index d89e08efd2ad..cadb6a0c2cc7 100644 --- a/drivers/power/supply/cros_usbpd-charger.c +++ b/drivers/power/supply/cros_usbpd-charger.c @@ -104,7 +104,7 @@ static int cros_usbpd_charger_ec_command(struct charger_data *charger, struct cros_ec_command *msg; int ret; - msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); + msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL); if (!msg) return -ENOMEM; diff --git a/drivers/power/supply/da9150-fg.c b/drivers/power/supply/da9150-fg.c index 6e367826aae9..8c5e2c49d6c1 100644 --- a/drivers/power/supply/da9150-fg.c +++ b/drivers/power/supply/da9150-fg.c @@ -20,6 +20,7 @@ #include <asm/div64.h> #include <linux/mfd/da9150/core.h> #include <linux/mfd/da9150/registers.h> +#include <linux/devm-helpers.h> /* Core2Wire */ #define DA9150_QIF_READ (0x0 << 7) @@ -506,43 +507,30 @@ static int da9150_fg_probe(struct platform_device *pdev) * work for reporting data updates. */ if (fg->interval) { - INIT_DELAYED_WORK(&fg->work, da9150_fg_work); + ret = devm_delayed_work_autocancel(dev, &fg->work, + da9150_fg_work); + if (ret) { + dev_err(dev, "Failed to init work\n"); + return ret; + } + schedule_delayed_work(&fg->work, msecs_to_jiffies(fg->interval)); } /* Register IRQ */ irq = platform_get_irq_byname(pdev, "FG"); - if (irq < 0) { - dev_err(dev, "Failed to get IRQ FG: %d\n", irq); - ret = irq; - goto irq_fail; - } + if (irq < 0) + return irq; ret = devm_request_threaded_irq(dev, irq, NULL, da9150_fg_irq, IRQF_ONESHOT, "FG", fg); if (ret) { dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret); - goto irq_fail; + return ret; } return 0; - -irq_fail: - if (fg->interval) - cancel_delayed_work(&fg->work); - - return ret; -} - -static int da9150_fg_remove(struct platform_device *pdev) -{ - struct da9150_fg *fg = platform_get_drvdata(pdev); - - if (fg->interval) - cancel_delayed_work(&fg->work); - - return 0; } static int da9150_fg_resume(struct platform_device *pdev) @@ -564,7 +552,6 @@ static struct platform_driver da9150_fg_driver = { .name = "da9150-fuel-gauge", }, .probe = da9150_fg_probe, - .remove = da9150_fg_remove, .resume = da9150_fg_resume, }; diff --git a/drivers/power/supply/ip5xxx_power.c b/drivers/power/supply/ip5xxx_power.c new file mode 100644 index 000000000000..218e8e689a3f --- /dev/null +++ b/drivers/power/supply/ip5xxx_power.c @@ -0,0 +1,638 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Samuel Holland <samuel@sholland.org> + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +#define IP5XXX_SYS_CTL0 0x01 +#define IP5XXX_SYS_CTL0_WLED_DET_EN BIT(4) +#define IP5XXX_SYS_CTL0_WLED_EN BIT(3) +#define IP5XXX_SYS_CTL0_BOOST_EN BIT(2) +#define IP5XXX_SYS_CTL0_CHARGER_EN BIT(1) +#define IP5XXX_SYS_CTL1 0x02 +#define IP5XXX_SYS_CTL1_LIGHT_SHDN_EN BIT(1) +#define IP5XXX_SYS_CTL1_LOAD_PWRUP_EN BIT(0) +#define IP5XXX_SYS_CTL2 0x0c +#define IP5XXX_SYS_CTL2_LIGHT_SHDN_TH GENMASK(7, 3) +#define IP5XXX_SYS_CTL3 0x03 +#define IP5XXX_SYS_CTL3_LONG_PRESS_TIME_SEL GENMASK(7, 6) +#define IP5XXX_SYS_CTL3_BTN_SHDN_EN BIT(5) +#define IP5XXX_SYS_CTL4 0x04 +#define IP5XXX_SYS_CTL4_SHDN_TIME_SEL GENMASK(7, 6) +#define IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN BIT(5) +#define IP5XXX_SYS_CTL5 0x07 +#define IP5XXX_SYS_CTL5_NTC_DIS BIT(6) +#define IP5XXX_SYS_CTL5_WLED_MODE_SEL BIT(1) +#define IP5XXX_SYS_CTL5_BTN_SHDN_SEL BIT(0) +#define IP5XXX_CHG_CTL1 0x22 +#define IP5XXX_CHG_CTL1_BOOST_UVP_SEL GENMASK(3, 2) +#define IP5XXX_CHG_CTL2 0x24 +#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL GENMASK(6, 5) +#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V (0x0 << 5) +#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V (0x1 << 5) +#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V (0x2 << 5) +#define IP5XXX_CHG_CTL2_CONST_VOLT_SEL GENMASK(2, 1) +#define IP5XXX_CHG_CTL4 0x26 +#define IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN BIT(6) +#define IP5XXX_CHG_CTL4A 0x25 +#define IP5XXX_CHG_CTL4A_CONST_CUR_SEL GENMASK(4, 0) +#define IP5XXX_MFP_CTL0 0x51 +#define IP5XXX_MFP_CTL1 0x52 +#define IP5XXX_GPIO_CTL2 0x53 +#define IP5XXX_GPIO_CTL2A 0x54 +#define IP5XXX_GPIO_CTL3 0x55 +#define IP5XXX_READ0 0x71 +#define IP5XXX_READ0_CHG_STAT GENMASK(7, 5) +#define IP5XXX_READ0_CHG_STAT_IDLE (0x0 << 5) +#define IP5XXX_READ0_CHG_STAT_TRICKLE (0x1 << 5) +#define IP5XXX_READ0_CHG_STAT_CONST_VOLT (0x2 << 5) +#define IP5XXX_READ0_CHG_STAT_CONST_CUR (0x3 << 5) +#define IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP (0x4 << 5) +#define IP5XXX_READ0_CHG_STAT_FULL (0x5 << 5) +#define IP5XXX_READ0_CHG_STAT_TIMEOUT (0x6 << 5) +#define IP5XXX_READ0_CHG_OP BIT(4) +#define IP5XXX_READ0_CHG_END BIT(3) +#define IP5XXX_READ0_CONST_VOLT_TIMEOUT BIT(2) +#define IP5XXX_READ0_CHG_TIMEOUT BIT(1) +#define IP5XXX_READ0_TRICKLE_TIMEOUT BIT(0) +#define IP5XXX_READ0_TIMEOUT GENMASK(2, 0) +#define IP5XXX_READ1 0x72 +#define IP5XXX_READ1_WLED_PRESENT BIT(7) +#define IP5XXX_READ1_LIGHT_LOAD BIT(6) +#define IP5XXX_READ1_VIN_OVERVOLT BIT(5) +#define IP5XXX_READ2 0x77 +#define IP5XXX_READ2_BTN_PRESS BIT(3) +#define IP5XXX_READ2_BTN_LONG_PRESS BIT(1) +#define IP5XXX_READ2_BTN_SHORT_PRESS BIT(0) +#define IP5XXX_BATVADC_DAT0 0xa2 +#define IP5XXX_BATVADC_DAT1 0xa3 +#define IP5XXX_BATIADC_DAT0 0xa4 +#define IP5XXX_BATIADC_DAT1 0xa5 +#define IP5XXX_BATOCV_DAT0 0xa8 +#define IP5XXX_BATOCV_DAT1 0xa9 + +struct ip5xxx { + struct regmap *regmap; + bool initialized; +}; + +/* + * The IP5xxx charger only responds on I2C when it is "awake". The charger is + * generally only awake when VIN is powered or when its boost converter is + * enabled. Going into shutdown resets all register values. To handle this: + * 1) When any bus error occurs, assume the charger has gone into shutdown. + * 2) Attempt the initialization sequence on each subsequent register access + * until it succeeds. + */ +static int ip5xxx_read(struct ip5xxx *ip5xxx, unsigned int reg, + unsigned int *val) +{ + int ret; + + ret = regmap_read(ip5xxx->regmap, reg, val); + if (ret) + ip5xxx->initialized = false; + + return ret; +} + +static int ip5xxx_update_bits(struct ip5xxx *ip5xxx, unsigned int reg, + unsigned int mask, unsigned int val) +{ + int ret; + + ret = regmap_update_bits(ip5xxx->regmap, reg, mask, val); + if (ret) + ip5xxx->initialized = false; + + return ret; +} + +static int ip5xxx_initialize(struct power_supply *psy) +{ + struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy); + int ret; + + if (ip5xxx->initialized) + return 0; + + /* + * Disable shutdown under light load. + * Enable power on when under load. + */ + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL1, + IP5XXX_SYS_CTL1_LIGHT_SHDN_EN | + IP5XXX_SYS_CTL1_LOAD_PWRUP_EN, + IP5XXX_SYS_CTL1_LOAD_PWRUP_EN); + if (ret) + return ret; + + /* + * Enable shutdown after a long button press (as configured below). + */ + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL3, + IP5XXX_SYS_CTL3_BTN_SHDN_EN, + IP5XXX_SYS_CTL3_BTN_SHDN_EN); + if (ret) + return ret; + + /* + * Power on automatically when VIN is removed. + */ + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL4, + IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN, + IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN); + if (ret) + return ret; + + /* + * Enable the NTC. + * Configure the button for two presses => LED, long press => shutdown. + */ + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL5, + IP5XXX_SYS_CTL5_NTC_DIS | + IP5XXX_SYS_CTL5_WLED_MODE_SEL | + IP5XXX_SYS_CTL5_BTN_SHDN_SEL, + IP5XXX_SYS_CTL5_WLED_MODE_SEL | + IP5XXX_SYS_CTL5_BTN_SHDN_SEL); + if (ret) + return ret; + + ip5xxx->initialized = true; + dev_dbg(psy->dev.parent, "Initialized after power on\n"); + + return 0; +} + +static const enum power_supply_property ip5xxx_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_OCV, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, +}; + +static int ip5xxx_battery_get_status(struct ip5xxx *ip5xxx, int *val) +{ + unsigned int rval; + int ret; + + ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval); + if (ret) + return ret; + + switch (rval & IP5XXX_READ0_CHG_STAT) { + case IP5XXX_READ0_CHG_STAT_IDLE: + *val = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case IP5XXX_READ0_CHG_STAT_TRICKLE: + case IP5XXX_READ0_CHG_STAT_CONST_CUR: + case IP5XXX_READ0_CHG_STAT_CONST_VOLT: + *val = POWER_SUPPLY_STATUS_CHARGING; + break; + case IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP: + case IP5XXX_READ0_CHG_STAT_FULL: + *val = POWER_SUPPLY_STATUS_FULL; + break; + case IP5XXX_READ0_CHG_STAT_TIMEOUT: + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ip5xxx_battery_get_charge_type(struct ip5xxx *ip5xxx, int *val) +{ + unsigned int rval; + int ret; + + ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval); + if (ret) + return ret; + + switch (rval & IP5XXX_READ0_CHG_STAT) { + case IP5XXX_READ0_CHG_STAT_IDLE: + case IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP: + case IP5XXX_READ0_CHG_STAT_FULL: + case IP5XXX_READ0_CHG_STAT_TIMEOUT: + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + case IP5XXX_READ0_CHG_STAT_TRICKLE: + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case IP5XXX_READ0_CHG_STAT_CONST_CUR: + case IP5XXX_READ0_CHG_STAT_CONST_VOLT: + *val = POWER_SUPPLY_CHARGE_TYPE_STANDARD; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ip5xxx_battery_get_health(struct ip5xxx *ip5xxx, int *val) +{ + unsigned int rval; + int ret; + + ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval); + if (ret) + return ret; + + if (rval & IP5XXX_READ0_TIMEOUT) + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + else + *val = POWER_SUPPLY_HEALTH_GOOD; + + return 0; +} + +static int ip5xxx_battery_get_voltage_max(struct ip5xxx *ip5xxx, int *val) +{ + unsigned int rval; + int ret; + + ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL2, &rval); + if (ret) + return ret; + + /* + * It is not clear what this will return if + * IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN is not set... + */ + switch (rval & IP5XXX_CHG_CTL2_BAT_TYPE_SEL) { + case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V: + *val = 4200000; + break; + case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V: + *val = 4300000; + break; + case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V: + *val = 4350000; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ip5xxx_battery_read_adc(struct ip5xxx *ip5xxx, + u8 lo_reg, u8 hi_reg, int *val) +{ + unsigned int hi, lo; + int ret; + + ret = ip5xxx_read(ip5xxx, lo_reg, &lo); + if (ret) + return ret; + + ret = ip5xxx_read(ip5xxx, hi_reg, &hi); + if (ret) + return ret; + + *val = sign_extend32(hi << 8 | lo, 13); + + return 0; +} + +static int ip5xxx_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy); + int raw, ret, vmax; + unsigned int rval; + + ret = ip5xxx_initialize(psy); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + return ip5xxx_battery_get_status(ip5xxx, &val->intval); + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + return ip5xxx_battery_get_charge_type(ip5xxx, &val->intval); + + case POWER_SUPPLY_PROP_HEALTH: + return ip5xxx_battery_get_health(ip5xxx, &val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + return ip5xxx_battery_get_voltage_max(ip5xxx, &val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATVADC_DAT0, + IP5XXX_BATVADC_DAT1, &raw); + + val->intval = 2600000 + DIV_ROUND_CLOSEST(raw * 26855, 100); + return 0; + + case POWER_SUPPLY_PROP_VOLTAGE_OCV: + ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATOCV_DAT0, + IP5XXX_BATOCV_DAT1, &raw); + + val->intval = 2600000 + DIV_ROUND_CLOSEST(raw * 26855, 100); + return 0; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATIADC_DAT0, + IP5XXX_BATIADC_DAT1, &raw); + + val->intval = DIV_ROUND_CLOSEST(raw * 745985, 1000); + return 0; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL4A, &rval); + if (ret) + return ret; + + rval &= IP5XXX_CHG_CTL4A_CONST_CUR_SEL; + val->intval = 100000 * rval; + return 0; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = 100000 * 0x1f; + return 0; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax); + if (ret) + return ret; + + ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL2, &rval); + if (ret) + return ret; + + rval &= IP5XXX_CHG_CTL2_CONST_VOLT_SEL; + val->intval = vmax + 14000 * (rval >> 1); + return 0; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax); + if (ret) + return ret; + + val->intval = vmax + 14000 * 3; + return 0; + + default: + return -EINVAL; + } +} + +static int ip5xxx_battery_set_voltage_max(struct ip5xxx *ip5xxx, int val) +{ + unsigned int rval; + int ret; + + switch (val) { + case 4200000: + rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V; + break; + case 4300000: + rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V; + break; + case 4350000: + rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V; + break; + default: + return -EINVAL; + } + + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL2, + IP5XXX_CHG_CTL2_BAT_TYPE_SEL, rval); + if (ret) + return ret; + + ret = ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL4, + IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN, + IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN); + if (ret) + return ret; + + return 0; +} + +static int ip5xxx_battery_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy); + unsigned int rval; + int ret, vmax; + + ret = ip5xxx_initialize(psy); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + switch (val->intval) { + case POWER_SUPPLY_STATUS_CHARGING: + rval = IP5XXX_SYS_CTL0_CHARGER_EN; + break; + case POWER_SUPPLY_STATUS_DISCHARGING: + case POWER_SUPPLY_STATUS_NOT_CHARGING: + rval = 0; + break; + default: + return -EINVAL; + } + return ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL0, + IP5XXX_SYS_CTL0_CHARGER_EN, rval); + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + return ip5xxx_battery_set_voltage_max(ip5xxx, val->intval); + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + rval = val->intval / 100000; + return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL4A, + IP5XXX_CHG_CTL4A_CONST_CUR_SEL, rval); + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax); + if (ret) + return ret; + + rval = ((val->intval - vmax) / 14000) << 1; + return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL2, + IP5XXX_CHG_CTL2_CONST_VOLT_SEL, rval); + + default: + return -EINVAL; + } +} + +static int ip5xxx_battery_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_STATUS || + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT || + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE; +} + +static const struct power_supply_desc ip5xxx_battery_desc = { + .name = "ip5xxx-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = ip5xxx_battery_properties, + .num_properties = ARRAY_SIZE(ip5xxx_battery_properties), + .get_property = ip5xxx_battery_get_property, + .set_property = ip5xxx_battery_set_property, + .property_is_writeable = ip5xxx_battery_property_is_writeable, +}; + +static const enum power_supply_property ip5xxx_boost_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, +}; + +static int ip5xxx_boost_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy); + unsigned int rval; + int ret; + + ret = ip5xxx_initialize(psy); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = ip5xxx_read(ip5xxx, IP5XXX_SYS_CTL0, &rval); + if (ret) + return ret; + + val->intval = !!(rval & IP5XXX_SYS_CTL0_BOOST_EN); + return 0; + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL1, &rval); + if (ret) + return ret; + + rval &= IP5XXX_CHG_CTL1_BOOST_UVP_SEL; + val->intval = 4530000 + 100000 * (rval >> 2); + return 0; + + default: + return -EINVAL; + } +} + +static int ip5xxx_boost_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy); + unsigned int rval; + int ret; + + ret = ip5xxx_initialize(psy); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + rval = val->intval ? IP5XXX_SYS_CTL0_BOOST_EN : 0; + return ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL0, + IP5XXX_SYS_CTL0_BOOST_EN, rval); + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + rval = ((val->intval - 4530000) / 100000) << 2; + return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL1, + IP5XXX_CHG_CTL1_BOOST_UVP_SEL, rval); + + default: + return -EINVAL; + } +} + +static int ip5xxx_boost_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return true; +} + +static const struct power_supply_desc ip5xxx_boost_desc = { + .name = "ip5xxx-boost", + .type = POWER_SUPPLY_TYPE_USB, + .properties = ip5xxx_boost_properties, + .num_properties = ARRAY_SIZE(ip5xxx_boost_properties), + .get_property = ip5xxx_boost_get_property, + .set_property = ip5xxx_boost_set_property, + .property_is_writeable = ip5xxx_boost_property_is_writeable, +}; + +static const struct regmap_config ip5xxx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = IP5XXX_BATOCV_DAT1, +}; + +static int ip5xxx_power_probe(struct i2c_client *client) +{ + struct power_supply_config psy_cfg = {}; + struct device *dev = &client->dev; + struct power_supply *psy; + struct ip5xxx *ip5xxx; + + ip5xxx = devm_kzalloc(dev, sizeof(*ip5xxx), GFP_KERNEL); + if (!ip5xxx) + return -ENOMEM; + + ip5xxx->regmap = devm_regmap_init_i2c(client, &ip5xxx_regmap_config); + if (IS_ERR(ip5xxx->regmap)) + return PTR_ERR(ip5xxx->regmap); + + psy_cfg.of_node = dev->of_node; + psy_cfg.drv_data = ip5xxx; + + psy = devm_power_supply_register(dev, &ip5xxx_battery_desc, &psy_cfg); + if (IS_ERR(psy)) + return PTR_ERR(psy); + + psy = devm_power_supply_register(dev, &ip5xxx_boost_desc, &psy_cfg); + if (IS_ERR(psy)) + return PTR_ERR(psy); + + return 0; +} + +static const struct of_device_id ip5xxx_power_of_match[] = { + { .compatible = "injoinic,ip5108" }, + { .compatible = "injoinic,ip5109" }, + { .compatible = "injoinic,ip5207" }, + { .compatible = "injoinic,ip5209" }, + { } +}; +MODULE_DEVICE_TABLE(of, ip5xxx_power_of_match); + +static struct i2c_driver ip5xxx_power_driver = { + .probe_new = ip5xxx_power_probe, + .driver = { + .name = "ip5xxx-power", + .of_match_table = ip5xxx_power_of_match, + } +}; +module_i2c_driver(ip5xxx_power_driver); + +MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); +MODULE_DESCRIPTION("Injoinic IP5xxx power bank IC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c index 09f3e78af4e0..657305214d68 100644 --- a/drivers/power/supply/ltc2941-battery-gauge.c +++ b/drivers/power/supply/ltc2941-battery-gauge.c @@ -112,7 +112,8 @@ static int ltc294x_read_regs(struct i2c_client *client, ret = i2c_transfer(client->adapter, &msgs[0], 2); if (ret < 0) { - dev_err(&client->dev, "ltc2941 read_reg failed!\n"); + dev_err(&client->dev, "ltc2941 read_reg(0x%x[%d]) failed: %pe\n", + reg, num_regs, ERR_PTR(ret)); return ret; } @@ -130,7 +131,8 @@ static int ltc294x_write_regs(struct i2c_client *client, ret = i2c_smbus_write_i2c_block_data(client, reg_start, num_regs, buf); if (ret < 0) { - dev_err(&client->dev, "ltc2941 write_reg failed!\n"); + dev_err(&client->dev, "ltc2941 write_reg(0x%x[%d]) failed: %pe\n", + reg, num_regs, ERR_PTR(ret)); return ret; } @@ -148,11 +150,8 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp) /* Read status and control registers */ ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1); - if (ret < 0) { - dev_err(&info->client->dev, - "Could not read registers from device\n"); - goto error_exit; - } + if (ret < 0) + return ret; control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) | LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED; @@ -172,17 +171,11 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp) if (value != control) { ret = ltc294x_write_regs(info->client, LTC294X_REG_CONTROL, &control, 1); - if (ret < 0) { - dev_err(&info->client->dev, - "Could not write register\n"); - goto error_exit; - } + if (ret < 0) + return ret; } return 0; - -error_exit: - return ret; } static int ltc294x_read_charge_register(const struct ltc294x_info *info, @@ -472,11 +465,9 @@ static int ltc294x_i2c_probe(struct i2c_client *client, /* r_sense can be negative, when sense+ is connected to the battery * instead of the sense-. This results in reversed measurements. */ ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense); - if (ret < 0) { - dev_err(&client->dev, + if (ret < 0) + return dev_err_probe(&client->dev, ret, "Could not find lltc,resistor-sense in devicetree\n"); - return ret; - } info->r_sense = r_sense; ret = of_property_read_u32(np, "lltc,prescaler-exponent", @@ -490,23 +481,21 @@ static int ltc294x_i2c_probe(struct i2c_client *client, if (info->id == LTC2943_ID) { if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP) prescaler_exp = LTC2943_MAX_PRESCALER_EXP; - info->Qlsb = ((340 * 50000) / r_sense) / - (4096 / (1 << (2*prescaler_exp))); + info->Qlsb = ((340 * 50000) / r_sense) >> + (12 - 2*prescaler_exp); } else { if (prescaler_exp > LTC2941_MAX_PRESCALER_EXP) prescaler_exp = LTC2941_MAX_PRESCALER_EXP; - info->Qlsb = ((85 * 50000) / r_sense) / - (128 / (1 << prescaler_exp)); + info->Qlsb = ((85 * 50000) / r_sense) >> + (7 - prescaler_exp); } /* Read status register to check for LTC2942 */ if (info->id == LTC2941_ID || info->id == LTC2942_ID) { ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1); - if (ret < 0) { - dev_err(&client->dev, + if (ret < 0) + return dev_err_probe(&client->dev, ret, "Could not read status register\n"); - return ret; - } if (status & LTC2941_REG_STATUS_CHIP_ID) info->id = LTC2941_ID; else @@ -545,19 +534,17 @@ static int ltc294x_i2c_probe(struct i2c_client *client, return ret; ret = ltc294x_reset(info, prescaler_exp); - if (ret < 0) { - dev_err(&client->dev, "Communication with chip failed\n"); - return ret; - } + if (ret < 0) + return dev_err_probe(&client->dev, ret, + "Communication with chip failed\n"); info->supply = devm_power_supply_register(&client->dev, &info->supply_desc, &psy_cfg); - if (IS_ERR(info->supply)) { - dev_err(&client->dev, "failed to register ltc2941\n"); - return PTR_ERR(info->supply); - } else { - schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ); - } + if (IS_ERR(info->supply)) + return dev_err_probe(&client->dev, PTR_ERR(info->supply), + "failed to register ltc2941\n"); + + schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ); return 0; } diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c index 3f49b29f3c88..fc36828895bf 100644 --- a/drivers/power/supply/max14656_charger_detector.c +++ b/drivers/power/supply/max14656_charger_detector.c @@ -18,6 +18,7 @@ #include <linux/of_device.h> #include <linux/workqueue.h> #include <linux/power_supply.h> +#include <linux/devm-helpers.h> #define MAX14656_MANUFACTURER "Maxim Integrated" #define MAX14656_NAME "max14656" @@ -233,14 +234,6 @@ static enum power_supply_property max14656_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; -static void stop_irq_work(void *data) -{ - struct max14656_chip *chip = data; - - cancel_delayed_work_sync(&chip->irq_work); -} - - static int max14656_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -286,10 +279,10 @@ static int max14656_probe(struct i2c_client *client, return -EINVAL; } - INIT_DELAYED_WORK(&chip->irq_work, max14656_irq_worker); - ret = devm_add_action(dev, stop_irq_work, chip); + ret = devm_delayed_work_autocancel(dev, &chip->irq_work, + max14656_irq_worker); if (ret) { - dev_err(dev, "devm_add_action %d failed\n", ret); + dev_err(dev, "devm_delayed_work_autocancel %d failed\n", ret); return ret; } diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 87128cf0d577..ab031bbfbe78 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -9,6 +9,7 @@ // This driver is based on max17040_battery.c #include <linux/acpi.h> +#include <linux/devm-helpers.h> #include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> @@ -1030,13 +1031,6 @@ static const struct power_supply_desc max17042_no_current_sense_psy_desc = { .num_properties = ARRAY_SIZE(max17042_battery_props) - 2, }; -static void max17042_stop_work(void *data) -{ - struct max17042_chip *chip = data; - - cancel_work_sync(&chip->work); -} - static int max17042_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1142,8 +1136,8 @@ static int max17042_probe(struct i2c_client *client, regmap_read(chip->regmap, MAX17042_STATUS, &val); if (val & STATUS_POR_BIT) { - INIT_WORK(&chip->work, max17042_init_worker); - ret = devm_add_action(&client->dev, max17042_stop_work, chip); + ret = devm_work_autocancel(&client->dev, &chip->work, + max17042_init_worker); if (ret) return ret; schedule_work(&chip->work); diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c index 25207fe2aa68..127c73b0b3bd 100644 --- a/drivers/power/supply/max8997_charger.c +++ b/drivers/power/supply/max8997_charger.c @@ -14,6 +14,7 @@ #include <linux/mfd/max8997.h> #include <linux/mfd/max8997-private.h> #include <linux/regulator/consumer.h> +#include <linux/devm-helpers.h> /* MAX8997_REG_STATUS4 */ #define DCINOK_SHIFT 1 @@ -94,13 +95,6 @@ static int max8997_battery_get_property(struct power_supply *psy, return 0; } -static void max8997_battery_extcon_evt_stop_work(void *data) -{ - struct charger_data *charger = data; - - cancel_work_sync(&charger->extcon_work); -} - static void max8997_battery_extcon_evt_worker(struct work_struct *work) { struct charger_data *charger = @@ -255,8 +249,8 @@ static int max8997_battery_probe(struct platform_device *pdev) } if (!IS_ERR(charger->reg) && !IS_ERR_OR_NULL(charger->edev)) { - INIT_WORK(&charger->extcon_work, max8997_battery_extcon_evt_worker); - ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger); + ret = devm_work_autocancel(&pdev->dev, &charger->extcon_work, + max8997_battery_extcon_evt_worker); if (ret) { dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret); return ret; diff --git a/drivers/power/supply/mp2629_charger.c b/drivers/power/supply/mp2629_charger.c index bdf924b73e47..bf9c27b463a8 100644 --- a/drivers/power/supply/mp2629_charger.c +++ b/drivers/power/supply/mp2629_charger.c @@ -580,11 +580,9 @@ static int mp2629_charger_probe(struct platform_device *pdev) charger->dev = dev; platform_set_drvdata(pdev, charger); - irq = platform_get_irq_optional(to_platform_device(dev->parent), 0); - if (irq < 0) { - dev_err(dev, "get irq fail: %d\n", irq); + irq = platform_get_irq(to_platform_device(dev->parent), 0); + if (irq < 0) return irq; - } for (i = 0; i < MP2629_MAX_FIELD; i++) { charger->regmap_fields[i] = devm_regmap_field_alloc(dev, diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index ec838c9bcc0a..ea02c8dcd748 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -23,6 +23,7 @@ #include <linux/thermal.h> #include <linux/fixp-arith.h> #include "power_supply.h" +#include "samsung-sdi-battery.h" /* exported for the APM Power driver, APM emulation */ struct class *power_supply_class; @@ -283,8 +284,7 @@ static int power_supply_check_supplies(struct power_supply *psy) if (!psy->dev.parent) return 0; - nval = device_property_read_string_array(psy->dev.parent, - "supplied-from", NULL, 0); + nval = device_property_string_array_count(psy->dev.parent, "supplied-from"); if (nval <= 0) return 0; @@ -376,46 +376,49 @@ int power_supply_is_system_supplied(void) } EXPORT_SYMBOL_GPL(power_supply_is_system_supplied); -static int __power_supply_get_supplier_max_current(struct device *dev, - void *data) +struct psy_get_supplier_prop_data { + struct power_supply *psy; + enum power_supply_property psp; + union power_supply_propval *val; +}; + +static int __power_supply_get_supplier_property(struct device *dev, void *_data) { - union power_supply_propval ret = {0,}; struct power_supply *epsy = dev_get_drvdata(dev); - struct power_supply *psy = data; + struct psy_get_supplier_prop_data *data = _data; - if (__power_supply_is_supplied_by(epsy, psy)) - if (!epsy->desc->get_property(epsy, - POWER_SUPPLY_PROP_CURRENT_MAX, - &ret)) - return ret.intval; + if (__power_supply_is_supplied_by(epsy, data->psy)) + if (!epsy->desc->get_property(epsy, data->psp, data->val)) + return 1; /* Success */ - return 0; + return 0; /* Continue iterating */ } -int power_supply_set_input_current_limit_from_supplier(struct power_supply *psy) +int power_supply_get_property_from_supplier(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) { - union power_supply_propval val = {0,}; - int curr; - - if (!psy->desc->set_property) - return -EINVAL; + struct psy_get_supplier_prop_data data = { + .psy = psy, + .psp = psp, + .val = val, + }; + int ret; /* * This function is not intended for use with a supply with multiple - * suppliers, we simply pick the first supply to report a non 0 - * max-current. + * suppliers, we simply pick the first supply to report the psp. */ - curr = class_for_each_device(power_supply_class, NULL, psy, - __power_supply_get_supplier_max_current); - if (curr <= 0) - return (curr == 0) ? -ENODEV : curr; - - val.intval = curr; + ret = class_for_each_device(power_supply_class, NULL, &data, + __power_supply_get_supplier_property); + if (ret < 0) + return ret; + if (ret == 0) + return -ENODEV; - return psy->desc->set_property(psy, - POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val); + return 0; } -EXPORT_SYMBOL_GPL(power_supply_set_input_current_limit_from_supplier); +EXPORT_SYMBOL_GPL(power_supply_get_property_from_supplier); int power_supply_set_battery_charged(struct power_supply *psy) { @@ -568,14 +571,50 @@ int power_supply_get_battery_info(struct power_supply *psy, { struct power_supply_resistance_temp_table *resist_table; struct power_supply_battery_info *info; - struct device_node *battery_np; + struct device_node *battery_np = NULL; + struct fwnode_reference_args args; + struct fwnode_handle *fwnode; const char *value; int err, len, index; const __be32 *list; + u32 min_max[2]; + + if (psy->of_node) { + battery_np = of_parse_phandle(psy->of_node, "monitored-battery", 0); + if (!battery_np) + return -ENODEV; + + fwnode = fwnode_handle_get(of_fwnode_handle(battery_np)); + } else { + err = fwnode_property_get_reference_args( + dev_fwnode(psy->dev.parent), + "monitored-battery", NULL, 0, 0, &args); + if (err) + return err; + + fwnode = args.fwnode; + } + + err = fwnode_property_read_string(fwnode, "compatible", &value); + if (err) + goto out_put_node; + + + /* Try static batteries first */ + err = samsung_sdi_battery_get_info(&psy->dev, value, &info); + if (!err) + goto out_ret_pointer; + + if (strcmp("simple-battery", value)) { + err = -ENODEV; + goto out_put_node; + } info = devm_kmalloc(&psy->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; + if (!info) { + err = -ENOMEM; + goto out_put_node; + } info->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; info->energy_full_design_uwh = -EINVAL; @@ -590,6 +629,11 @@ int power_supply_get_battery_info(struct power_supply *psy, info->precharge_voltage_max_uv = -EINVAL; info->charge_restart_voltage_uv = -EINVAL; info->overvoltage_limit_uv = -EINVAL; + info->maintenance_charge = NULL; + info->alert_low_temp_charge_current_ua = -EINVAL; + info->alert_low_temp_charge_voltage_uv = -EINVAL; + info->alert_high_temp_charge_current_ua = -EINVAL; + info->alert_high_temp_charge_voltage_uv = -EINVAL; info->temp_ambient_alert_min = INT_MIN; info->temp_ambient_alert_max = INT_MAX; info->temp_alert_min = INT_MIN; @@ -597,7 +641,9 @@ int power_supply_get_battery_info(struct power_supply *psy, info->temp_min = INT_MIN; info->temp_max = INT_MAX; info->factory_internal_resistance_uohm = -EINVAL; - info->resist_table = NULL; + info->resist_table = NULL; + info->bti_resistance_ohm = -EINVAL; + info->bti_resistance_tolerance = -EINVAL; for (index = 0; index < POWER_SUPPLY_OCV_TEMP_MAX; index++) { info->ocv_table[index] = NULL; @@ -605,31 +651,12 @@ int power_supply_get_battery_info(struct power_supply *psy, info->ocv_table_size[index] = -EINVAL; } - if (!psy->of_node) { - dev_warn(&psy->dev, "%s currently only supports devicetree\n", - __func__); - return -ENXIO; - } - - battery_np = of_parse_phandle(psy->of_node, "monitored-battery", 0); - if (!battery_np) - return -ENODEV; - - err = of_property_read_string(battery_np, "compatible", &value); - if (err) - goto out_put_node; - - if (strcmp("simple-battery", value)) { - err = -ENODEV; - goto out_put_node; - } - /* The property and field names below must correspond to elements * in enum power_supply_property. For reasoning, see * Documentation/power/power_supply_class.rst. */ - if (!of_property_read_string(battery_np, "device-chemistry", &value)) { + if (!fwnode_property_read_string(fwnode, "device-chemistry", &value)) { if (!strcmp("nickel-cadmium", value)) info->technology = POWER_SUPPLY_TECHNOLOGY_NiCd; else if (!strcmp("nickel-metal-hydride", value)) @@ -647,45 +674,56 @@ int power_supply_get_battery_info(struct power_supply *psy, dev_warn(&psy->dev, "%s unknown battery type\n", value); } - of_property_read_u32(battery_np, "energy-full-design-microwatt-hours", + fwnode_property_read_u32(fwnode, "energy-full-design-microwatt-hours", &info->energy_full_design_uwh); - of_property_read_u32(battery_np, "charge-full-design-microamp-hours", + fwnode_property_read_u32(fwnode, "charge-full-design-microamp-hours", &info->charge_full_design_uah); - of_property_read_u32(battery_np, "voltage-min-design-microvolt", + fwnode_property_read_u32(fwnode, "voltage-min-design-microvolt", &info->voltage_min_design_uv); - of_property_read_u32(battery_np, "voltage-max-design-microvolt", + fwnode_property_read_u32(fwnode, "voltage-max-design-microvolt", &info->voltage_max_design_uv); - of_property_read_u32(battery_np, "trickle-charge-current-microamp", + fwnode_property_read_u32(fwnode, "trickle-charge-current-microamp", &info->tricklecharge_current_ua); - of_property_read_u32(battery_np, "precharge-current-microamp", + fwnode_property_read_u32(fwnode, "precharge-current-microamp", &info->precharge_current_ua); - of_property_read_u32(battery_np, "precharge-upper-limit-microvolt", + fwnode_property_read_u32(fwnode, "precharge-upper-limit-microvolt", &info->precharge_voltage_max_uv); - of_property_read_u32(battery_np, "charge-term-current-microamp", + fwnode_property_read_u32(fwnode, "charge-term-current-microamp", &info->charge_term_current_ua); - of_property_read_u32(battery_np, "re-charge-voltage-microvolt", + fwnode_property_read_u32(fwnode, "re-charge-voltage-microvolt", &info->charge_restart_voltage_uv); - of_property_read_u32(battery_np, "over-voltage-threshold-microvolt", + fwnode_property_read_u32(fwnode, "over-voltage-threshold-microvolt", &info->overvoltage_limit_uv); - of_property_read_u32(battery_np, "constant-charge-current-max-microamp", + fwnode_property_read_u32(fwnode, "constant-charge-current-max-microamp", &info->constant_charge_current_max_ua); - of_property_read_u32(battery_np, "constant-charge-voltage-max-microvolt", + fwnode_property_read_u32(fwnode, "constant-charge-voltage-max-microvolt", &info->constant_charge_voltage_max_uv); - of_property_read_u32(battery_np, "factory-internal-resistance-micro-ohms", + fwnode_property_read_u32(fwnode, "factory-internal-resistance-micro-ohms", &info->factory_internal_resistance_uohm); - of_property_read_u32_index(battery_np, "ambient-celsius", - 0, &info->temp_ambient_alert_min); - of_property_read_u32_index(battery_np, "ambient-celsius", - 1, &info->temp_ambient_alert_max); - of_property_read_u32_index(battery_np, "alert-celsius", - 0, &info->temp_alert_min); - of_property_read_u32_index(battery_np, "alert-celsius", - 1, &info->temp_alert_max); - of_property_read_u32_index(battery_np, "operating-range-celsius", - 0, &info->temp_min); - of_property_read_u32_index(battery_np, "operating-range-celsius", - 1, &info->temp_max); + if (!fwnode_property_read_u32_array(fwnode, "ambient-celsius", + min_max, ARRAY_SIZE(min_max))) { + info->temp_ambient_alert_min = min_max[0]; + info->temp_ambient_alert_max = min_max[1]; + } + if (!fwnode_property_read_u32_array(fwnode, "alert-celsius", + min_max, ARRAY_SIZE(min_max))) { + info->temp_alert_min = min_max[0]; + info->temp_alert_max = min_max[1]; + } + if (!fwnode_property_read_u32_array(fwnode, "operating-range-celsius", + min_max, ARRAY_SIZE(min_max))) { + info->temp_min = min_max[0]; + info->temp_max = min_max[1]; + } + + /* + * The below code uses raw of-data parsing to parse + * /schemas/types.yaml#/definitions/uint32-matrix + * data, so for now this is only support with of. + */ + if (!battery_np) + goto out_ret_pointer; len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius"); if (len < 0 && len != -EINVAL) { @@ -760,6 +798,7 @@ out_ret_pointer: *info_out = info; out_put_node: + fwnode_handle_put(fwnode); of_node_put(battery_np); return err; } @@ -784,7 +823,7 @@ EXPORT_SYMBOL_GPL(power_supply_put_battery_info); /** * power_supply_temp2resist_simple() - find the battery internal resistance - * percent + * percent from temperature * @table: Pointer to battery resistance temperature table * @table_len: The table length * @temp: Current temperature @@ -822,6 +861,81 @@ int power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *t EXPORT_SYMBOL_GPL(power_supply_temp2resist_simple); /** + * power_supply_vbat2ri() - find the battery internal resistance + * from the battery voltage + * @info: The battery information container + * @table: Pointer to battery resistance temperature table + * @vbat_uv: The battery voltage in microvolt + * @charging: If we are charging (true) or not (false) + * + * This helper function is used to look up battery internal resistance + * according to current battery voltage. Depending on whether the battery + * is currently charging or not, different resistance will be returned. + * + * Returns the internal resistance in microohm or negative error code. + */ +int power_supply_vbat2ri(struct power_supply_battery_info *info, + int vbat_uv, bool charging) +{ + struct power_supply_vbat_ri_table *vbat2ri; + int table_len; + int i, high, low; + + /* + * If we are charging, and the battery supplies a separate table + * for this state, we use that in order to compensate for the + * charging voltage. Otherwise we use the main table. + */ + if (charging && info->vbat2ri_charging) { + vbat2ri = info->vbat2ri_charging; + table_len = info->vbat2ri_charging_size; + } else { + vbat2ri = info->vbat2ri_discharging; + table_len = info->vbat2ri_discharging_size; + } + + /* + * If no tables are specified, or if we are above the highest voltage in + * the voltage table, just return the factory specified internal resistance. + */ + if (!vbat2ri || (table_len <= 0) || (vbat_uv > vbat2ri[0].vbat_uv)) { + if (charging && (info->factory_internal_resistance_charging_uohm > 0)) + return info->factory_internal_resistance_charging_uohm; + else + return info->factory_internal_resistance_uohm; + } + + /* Break loop at table_len - 1 because that is the highest index */ + for (i = 0; i < table_len - 1; i++) + if (vbat_uv > vbat2ri[i].vbat_uv) + break; + + /* The library function will deal with high == low */ + if ((i == 0) || (i == (table_len - 1))) + high = i; + else + high = i - 1; + low = i; + + return fixp_linear_interpolate(vbat2ri[low].vbat_uv, + vbat2ri[low].ri_uohm, + vbat2ri[high].vbat_uv, + vbat2ri[high].ri_uohm, + vbat_uv); +} +EXPORT_SYMBOL_GPL(power_supply_vbat2ri); + +struct power_supply_maintenance_charge_table * +power_supply_get_maintenance_charging_setting(struct power_supply_battery_info *info, + int index) +{ + if (index >= info->maintenance_charge_size) + return NULL; + return &info->maintenance_charge[index]; +} +EXPORT_SYMBOL_GPL(power_supply_get_maintenance_charging_setting); + +/** * power_supply_ocv2cap_simple() - find the battery capacity * @table: Pointer to battery OCV lookup table * @table_len: OCV table length @@ -900,6 +1014,28 @@ int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info, } EXPORT_SYMBOL_GPL(power_supply_batinfo_ocv2cap); +bool power_supply_battery_bti_in_range(struct power_supply_battery_info *info, + int resistance) +{ + int low, high; + + /* Nothing like this can be checked */ + if (info->bti_resistance_ohm <= 0) + return false; + + /* This will be extremely strict and unlikely to work */ + if (info->bti_resistance_tolerance <= 0) + return (info->bti_resistance_ohm == resistance); + + low = info->bti_resistance_ohm - + (info->bti_resistance_ohm * info->bti_resistance_tolerance) / 100; + high = info->bti_resistance_ohm + + (info->bti_resistance_ohm * info->bti_resistance_tolerance) / 100; + + return ((resistance >= low) && (resistance <= high)); +} +EXPORT_SYMBOL_GPL(power_supply_battery_bti_in_range); + int power_supply_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c index bffe6d84c429..a48aa4afb828 100644 --- a/drivers/power/supply/power_supply_hwmon.c +++ b/drivers/power/supply/power_supply_hwmon.c @@ -324,11 +324,6 @@ static const struct hwmon_chip_info power_supply_hwmon_chip_info = { .info = power_supply_hwmon_info, }; -static void power_supply_hwmon_bitmap_free(void *data) -{ - bitmap_free(data); -} - int power_supply_add_hwmon_sysfs(struct power_supply *psy) { const struct power_supply_desc *desc = psy->desc; @@ -349,18 +344,14 @@ int power_supply_add_hwmon_sysfs(struct power_supply *psy) } psyhw->psy = psy; - psyhw->props = bitmap_zalloc(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1, - GFP_KERNEL); + psyhw->props = devm_bitmap_zalloc(dev, + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1, + GFP_KERNEL); if (!psyhw->props) { ret = -ENOMEM; goto error; } - ret = devm_add_action_or_reset(dev, power_supply_hwmon_bitmap_free, - psyhw->props); - if (ret) - goto error; - for (i = 0; i < desc->num_properties; i++) { const enum power_supply_property prop = desc->properties[i]; diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index c0dfcfa33206..4239591e1522 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -89,6 +89,7 @@ static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = { [POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE] = "Adaptive", [POWER_SUPPLY_CHARGE_TYPE_CUSTOM] = "Custom", [POWER_SUPPLY_CHARGE_TYPE_LONGLIFE] = "Long Life", + [POWER_SUPPLY_CHARGE_TYPE_BYPASS] = "Bypass", }; static const char * const POWER_SUPPLY_HEALTH_TEXT[] = { diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c index 594bb3b8a4d1..74ee54320e6a 100644 --- a/drivers/power/supply/rt9455_charger.c +++ b/drivers/power/supply/rt9455_charger.c @@ -1716,7 +1716,7 @@ static int rt9455_remove(struct i2c_client *client) cancel_delayed_work_sync(&info->max_charging_time_work); cancel_delayed_work_sync(&info->batt_presence_work); - return ret; + return 0; } static const struct i2c_device_id rt9455_i2c_id_table[] = { diff --git a/drivers/power/supply/samsung-sdi-battery.c b/drivers/power/supply/samsung-sdi-battery.c new file mode 100644 index 000000000000..9d59f277f519 --- /dev/null +++ b/drivers/power/supply/samsung-sdi-battery.c @@ -0,0 +1,918 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Battery data and characteristics for Samsung SDI (Samsung Digital Interface) + * batteries. The data is retrieved automatically into drivers using + * the power_supply_get_battery_info() call. + * + * The BTI (battery type indicator) resistance in the code drops was very + * unreliable. The resistance listed here was obtained by simply measuring + * the BTI resistance with a multimeter on the battery. + */ +#include <linux/module.h> +#include <linux/power_supply.h> +#include "samsung-sdi-battery.h" + +struct samsung_sdi_battery { + char *compatible; + char *name; + struct power_supply_battery_info info; +}; + +/* + * Voltage to internal resistance tables. The internal resistance varies + * depending on the VBAT voltage, so look this up from a table. Different + * tables apply depending on whether we are charging or not. + */ + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb_l1m7flu[] = { + { .vbat_uv = 4240000, .ri_uohm = 160000 }, + { .vbat_uv = 4210000, .ri_uohm = 179000 }, + { .vbat_uv = 4180000, .ri_uohm = 183000 }, + { .vbat_uv = 4160000, .ri_uohm = 184000 }, + { .vbat_uv = 4140000, .ri_uohm = 191000 }, + { .vbat_uv = 4120000, .ri_uohm = 204000 }, + { .vbat_uv = 4076000, .ri_uohm = 220000 }, + { .vbat_uv = 4030000, .ri_uohm = 227000 }, + { .vbat_uv = 3986000, .ri_uohm = 215000 }, + { .vbat_uv = 3916000, .ri_uohm = 221000 }, + { .vbat_uv = 3842000, .ri_uohm = 259000 }, + { .vbat_uv = 3773000, .ri_uohm = 287000 }, + { .vbat_uv = 3742000, .ri_uohm = 283000 }, + { .vbat_uv = 3709000, .ri_uohm = 277000 }, + { .vbat_uv = 3685000, .ri_uohm = 297000 }, + { .vbat_uv = 3646000, .ri_uohm = 310000 }, + { .vbat_uv = 3616000, .ri_uohm = 331000 }, + { .vbat_uv = 3602000, .ri_uohm = 370000 }, + { .vbat_uv = 3578000, .ri_uohm = 350000 }, + { .vbat_uv = 3553000, .ri_uohm = 321000 }, + { .vbat_uv = 3503000, .ri_uohm = 322000 }, + { .vbat_uv = 3400000, .ri_uohm = 269000 }, + { .vbat_uv = 3360000, .ri_uohm = 328000 }, + { .vbat_uv = 3330000, .ri_uohm = 305000 }, + { .vbat_uv = 3300000, .ri_uohm = 339000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb_l1m7flu[] = { + { .vbat_uv = 4302000, .ri_uohm = 230000 }, + { .vbat_uv = 4276000, .ri_uohm = 345000 }, + { .vbat_uv = 4227000, .ri_uohm = 345000 }, + { .vbat_uv = 4171000, .ri_uohm = 346000 }, + { .vbat_uv = 4134000, .ri_uohm = 311000 }, + { .vbat_uv = 4084000, .ri_uohm = 299000 }, + { .vbat_uv = 4052000, .ri_uohm = 316000 }, + { .vbat_uv = 4012000, .ri_uohm = 309000 }, + { .vbat_uv = 3961000, .ri_uohm = 303000 }, + { .vbat_uv = 3939000, .ri_uohm = 280000 }, + { .vbat_uv = 3904000, .ri_uohm = 261000 }, + { .vbat_uv = 3850000, .ri_uohm = 212000 }, + { .vbat_uv = 3800000, .ri_uohm = 232000 }, + { .vbat_uv = 3750000, .ri_uohm = 177000 }, + { .vbat_uv = 3712000, .ri_uohm = 164000 }, + { .vbat_uv = 3674000, .ri_uohm = 161000 }, + { .vbat_uv = 3590000, .ri_uohm = 164000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb425161la[] = { + { .vbat_uv = 4240000, .ri_uohm = 160000 }, + { .vbat_uv = 4210000, .ri_uohm = 179000 }, + { .vbat_uv = 4180000, .ri_uohm = 183000 }, + { .vbat_uv = 4160000, .ri_uohm = 184000 }, + { .vbat_uv = 4140000, .ri_uohm = 191000 }, + { .vbat_uv = 4120000, .ri_uohm = 204000 }, + { .vbat_uv = 4080000, .ri_uohm = 200000 }, + { .vbat_uv = 4027000, .ri_uohm = 202000 }, + { .vbat_uv = 3916000, .ri_uohm = 221000 }, + { .vbat_uv = 3842000, .ri_uohm = 259000 }, + { .vbat_uv = 3800000, .ri_uohm = 262000 }, + { .vbat_uv = 3742000, .ri_uohm = 263000 }, + { .vbat_uv = 3709000, .ri_uohm = 277000 }, + { .vbat_uv = 3685000, .ri_uohm = 312000 }, + { .vbat_uv = 3668000, .ri_uohm = 258000 }, + { .vbat_uv = 3660000, .ri_uohm = 247000 }, + { .vbat_uv = 3636000, .ri_uohm = 293000 }, + { .vbat_uv = 3616000, .ri_uohm = 331000 }, + { .vbat_uv = 3600000, .ri_uohm = 349000 }, + { .vbat_uv = 3593000, .ri_uohm = 345000 }, + { .vbat_uv = 3585000, .ri_uohm = 344000 }, + { .vbat_uv = 3572000, .ri_uohm = 336000 }, + { .vbat_uv = 3553000, .ri_uohm = 321000 }, + { .vbat_uv = 3517000, .ri_uohm = 336000 }, + { .vbat_uv = 3503000, .ri_uohm = 322000 }, + { .vbat_uv = 3400000, .ri_uohm = 269000 }, + { .vbat_uv = 3360000, .ri_uohm = 328000 }, + { .vbat_uv = 3330000, .ri_uohm = 305000 }, + { .vbat_uv = 3300000, .ri_uohm = 339000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb425161la[] = { + { .vbat_uv = 4345000, .ri_uohm = 230000 }, + { .vbat_uv = 4329000, .ri_uohm = 238000 }, + { .vbat_uv = 4314000, .ri_uohm = 225000 }, + { .vbat_uv = 4311000, .ri_uohm = 239000 }, + { .vbat_uv = 4294000, .ri_uohm = 235000 }, + { .vbat_uv = 4264000, .ri_uohm = 229000 }, + { .vbat_uv = 4262000, .ri_uohm = 228000 }, + { .vbat_uv = 4252000, .ri_uohm = 236000 }, + { .vbat_uv = 4244000, .ri_uohm = 234000 }, + { .vbat_uv = 4235000, .ri_uohm = 234000 }, + { .vbat_uv = 4227000, .ri_uohm = 238000 }, + { .vbat_uv = 4219000, .ri_uohm = 242000 }, + { .vbat_uv = 4212000, .ri_uohm = 239000 }, + { .vbat_uv = 4206000, .ri_uohm = 231000 }, + { .vbat_uv = 4201000, .ri_uohm = 231000 }, + { .vbat_uv = 4192000, .ri_uohm = 224000 }, + { .vbat_uv = 4184000, .ri_uohm = 238000 }, + { .vbat_uv = 4173000, .ri_uohm = 245000 }, + { .vbat_uv = 4161000, .ri_uohm = 244000 }, + { .vbat_uv = 4146000, .ri_uohm = 244000 }, + { .vbat_uv = 4127000, .ri_uohm = 228000 }, + { .vbat_uv = 4119000, .ri_uohm = 218000 }, + { .vbat_uv = 4112000, .ri_uohm = 215000 }, + { .vbat_uv = 4108000, .ri_uohm = 209000 }, + { .vbat_uv = 4102000, .ri_uohm = 214000 }, + { .vbat_uv = 4096000, .ri_uohm = 215000 }, + { .vbat_uv = 4090000, .ri_uohm = 215000 }, + { .vbat_uv = 4083000, .ri_uohm = 219000 }, + { .vbat_uv = 4078000, .ri_uohm = 208000 }, + { .vbat_uv = 4071000, .ri_uohm = 205000 }, + { .vbat_uv = 4066000, .ri_uohm = 208000 }, + { .vbat_uv = 4061000, .ri_uohm = 210000 }, + { .vbat_uv = 4055000, .ri_uohm = 212000 }, + { .vbat_uv = 4049000, .ri_uohm = 215000 }, + { .vbat_uv = 4042000, .ri_uohm = 212000 }, + { .vbat_uv = 4032000, .ri_uohm = 217000 }, + { .vbat_uv = 4027000, .ri_uohm = 220000 }, + { .vbat_uv = 4020000, .ri_uohm = 210000 }, + { .vbat_uv = 4013000, .ri_uohm = 214000 }, + { .vbat_uv = 4007000, .ri_uohm = 219000 }, + { .vbat_uv = 4003000, .ri_uohm = 229000 }, + { .vbat_uv = 3996000, .ri_uohm = 246000 }, + { .vbat_uv = 3990000, .ri_uohm = 245000 }, + { .vbat_uv = 3984000, .ri_uohm = 242000 }, + { .vbat_uv = 3977000, .ri_uohm = 236000 }, + { .vbat_uv = 3971000, .ri_uohm = 231000 }, + { .vbat_uv = 3966000, .ri_uohm = 229000 }, + { .vbat_uv = 3952000, .ri_uohm = 226000 }, + { .vbat_uv = 3946000, .ri_uohm = 222000 }, + { .vbat_uv = 3941000, .ri_uohm = 222000 }, + { .vbat_uv = 3936000, .ri_uohm = 217000 }, + { .vbat_uv = 3932000, .ri_uohm = 217000 }, + { .vbat_uv = 3928000, .ri_uohm = 212000 }, + { .vbat_uv = 3926000, .ri_uohm = 214000 }, + { .vbat_uv = 3922000, .ri_uohm = 209000 }, + { .vbat_uv = 3917000, .ri_uohm = 215000 }, + { .vbat_uv = 3914000, .ri_uohm = 212000 }, + { .vbat_uv = 3912000, .ri_uohm = 220000 }, + { .vbat_uv = 3910000, .ri_uohm = 226000 }, + { .vbat_uv = 3903000, .ri_uohm = 226000 }, + { .vbat_uv = 3891000, .ri_uohm = 222000 }, + { .vbat_uv = 3871000, .ri_uohm = 221000 }, + { .vbat_uv = 3857000, .ri_uohm = 219000 }, + { .vbat_uv = 3850000, .ri_uohm = 216000 }, + { .vbat_uv = 3843000, .ri_uohm = 212000 }, + { .vbat_uv = 3835000, .ri_uohm = 206000 }, + { .vbat_uv = 3825000, .ri_uohm = 217000 }, + { .vbat_uv = 3824000, .ri_uohm = 220000 }, + { .vbat_uv = 3820000, .ri_uohm = 237000 }, + { .vbat_uv = 3800000, .ri_uohm = 232000 }, + { .vbat_uv = 3750000, .ri_uohm = 177000 }, + { .vbat_uv = 3712000, .ri_uohm = 164000 }, + { .vbat_uv = 3674000, .ri_uohm = 161000 }, + { .vbat_uv = 3590000, .ri_uohm = 164000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb425161lu[] = { + { .vbat_uv = 4240000, .ri_uohm = 160000 }, + { .vbat_uv = 4210000, .ri_uohm = 179000 }, + { .vbat_uv = 4180000, .ri_uohm = 183000 }, + { .vbat_uv = 4160000, .ri_uohm = 184000 }, + { .vbat_uv = 4140000, .ri_uohm = 191000 }, + { .vbat_uv = 4120000, .ri_uohm = 204000 }, + { .vbat_uv = 4080000, .ri_uohm = 200000 }, + { .vbat_uv = 4027000, .ri_uohm = 202000 }, + { .vbat_uv = 3916000, .ri_uohm = 221000 }, + { .vbat_uv = 3842000, .ri_uohm = 259000 }, + { .vbat_uv = 3800000, .ri_uohm = 262000 }, + { .vbat_uv = 3742000, .ri_uohm = 263000 }, + { .vbat_uv = 3708000, .ri_uohm = 277000 }, + { .vbat_uv = 3684000, .ri_uohm = 272000 }, + { .vbat_uv = 3664000, .ri_uohm = 278000 }, + { .vbat_uv = 3655000, .ri_uohm = 285000 }, + { .vbat_uv = 3638000, .ri_uohm = 261000 }, + { .vbat_uv = 3624000, .ri_uohm = 259000 }, + { .vbat_uv = 3616000, .ri_uohm = 266000 }, + { .vbat_uv = 3597000, .ri_uohm = 278000 }, + { .vbat_uv = 3581000, .ri_uohm = 281000 }, + { .vbat_uv = 3560000, .ri_uohm = 287000 }, + { .vbat_uv = 3527000, .ri_uohm = 289000 }, + { .vbat_uv = 3512000, .ri_uohm = 286000 }, + { .vbat_uv = 3494000, .ri_uohm = 282000 }, + { .vbat_uv = 3400000, .ri_uohm = 269000 }, + { .vbat_uv = 3360000, .ri_uohm = 328000 }, + { .vbat_uv = 3330000, .ri_uohm = 305000 }, + { .vbat_uv = 3300000, .ri_uohm = 339000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb425161lu[] = { + { .vbat_uv = 4346000, .ri_uohm = 293000 }, + { .vbat_uv = 4336000, .ri_uohm = 290000 }, + { .vbat_uv = 4315000, .ri_uohm = 274000 }, + { .vbat_uv = 4310000, .ri_uohm = 264000 }, + { .vbat_uv = 4275000, .ri_uohm = 275000 }, + { .vbat_uv = 4267000, .ri_uohm = 274000 }, + { .vbat_uv = 4227000, .ri_uohm = 262000 }, + { .vbat_uv = 4186000, .ri_uohm = 282000 }, + { .vbat_uv = 4136000, .ri_uohm = 246000 }, + { .vbat_uv = 4110000, .ri_uohm = 242000 }, + { .vbat_uv = 4077000, .ri_uohm = 249000 }, + { .vbat_uv = 4049000, .ri_uohm = 238000 }, + { .vbat_uv = 4017000, .ri_uohm = 268000 }, + { .vbat_uv = 3986000, .ri_uohm = 261000 }, + { .vbat_uv = 3962000, .ri_uohm = 252000 }, + { .vbat_uv = 3940000, .ri_uohm = 235000 }, + { .vbat_uv = 3930000, .ri_uohm = 237000 }, + { .vbat_uv = 3924000, .ri_uohm = 255000 }, + { .vbat_uv = 3910000, .ri_uohm = 244000 }, + { .vbat_uv = 3889000, .ri_uohm = 231000 }, + { .vbat_uv = 3875000, .ri_uohm = 249000 }, + { .vbat_uv = 3850000, .ri_uohm = 212000 }, + { .vbat_uv = 3800000, .ri_uohm = 232000 }, + { .vbat_uv = 3750000, .ri_uohm = 177000 }, + { .vbat_uv = 3712000, .ri_uohm = 164000 }, + { .vbat_uv = 3674000, .ri_uohm = 161000 }, + { .vbat_uv = 3590000, .ri_uohm = 164000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb485159lu[] = { + { .vbat_uv = 4240000, .ri_uohm = 160000 }, + { .vbat_uv = 4210000, .ri_uohm = 179000 }, + { .vbat_uv = 4180000, .ri_uohm = 183000 }, + { .vbat_uv = 4160000, .ri_uohm = 184000 }, + { .vbat_uv = 4140000, .ri_uohm = 191000 }, + { .vbat_uv = 4120000, .ri_uohm = 204000 }, + { .vbat_uv = 4080000, .ri_uohm = 200000 }, + { .vbat_uv = 4027000, .ri_uohm = 202000 }, + { .vbat_uv = 3916000, .ri_uohm = 221000 }, + { .vbat_uv = 3842000, .ri_uohm = 259000 }, + { .vbat_uv = 3800000, .ri_uohm = 262000 }, + { .vbat_uv = 3715000, .ri_uohm = 340000 }, + { .vbat_uv = 3700000, .ri_uohm = 300000 }, + { .vbat_uv = 3682000, .ri_uohm = 233000 }, + { .vbat_uv = 3655000, .ri_uohm = 246000 }, + { .vbat_uv = 3639000, .ri_uohm = 260000 }, + { .vbat_uv = 3621000, .ri_uohm = 254000 }, + { .vbat_uv = 3583000, .ri_uohm = 266000 }, + { .vbat_uv = 3536000, .ri_uohm = 274000 }, + { .vbat_uv = 3502000, .ri_uohm = 300000 }, + { .vbat_uv = 3465000, .ri_uohm = 245000 }, + { .vbat_uv = 3438000, .ri_uohm = 225000 }, + { .vbat_uv = 3330000, .ri_uohm = 305000 }, + { .vbat_uv = 3300000, .ri_uohm = 339000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb485159lu[] = { + { .vbat_uv = 4302000, .ri_uohm = 200000 }, + { .vbat_uv = 4258000, .ri_uohm = 206000 }, + { .vbat_uv = 4200000, .ri_uohm = 231000 }, + { .vbat_uv = 4150000, .ri_uohm = 198000 }, + { .vbat_uv = 4134000, .ri_uohm = 268000 }, + { .vbat_uv = 4058000, .ri_uohm = 172000 }, + { .vbat_uv = 4003000, .ri_uohm = 227000 }, + { .vbat_uv = 3972000, .ri_uohm = 241000 }, + { .vbat_uv = 3953000, .ri_uohm = 244000 }, + { .vbat_uv = 3950000, .ri_uohm = 213000 }, + { .vbat_uv = 3900000, .ri_uohm = 225000 }, + { .vbat_uv = 3850000, .ri_uohm = 212000 }, + { .vbat_uv = 3800000, .ri_uohm = 232000 }, + { .vbat_uv = 3750000, .ri_uohm = 177000 }, + { .vbat_uv = 3712000, .ri_uohm = 164000 }, + { .vbat_uv = 3674000, .ri_uohm = 161000 }, + { .vbat_uv = 3590000, .ri_uohm = 164000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb535151vu[] = { + { .vbat_uv = 4071000, .ri_uohm = 158000 }, + { .vbat_uv = 4019000, .ri_uohm = 187000 }, + { .vbat_uv = 3951000, .ri_uohm = 191000 }, + { .vbat_uv = 3901000, .ri_uohm = 193000 }, + { .vbat_uv = 3850000, .ri_uohm = 273000 }, + { .vbat_uv = 3800000, .ri_uohm = 305000 }, + { .vbat_uv = 3750000, .ri_uohm = 205000 }, + { .vbat_uv = 3700000, .ri_uohm = 290000 }, + { .vbat_uv = 3650000, .ri_uohm = 262000 }, + { .vbat_uv = 3618000, .ri_uohm = 290000 }, + { .vbat_uv = 3505000, .ri_uohm = 235000 }, + { .vbat_uv = 3484000, .ri_uohm = 253000 }, + { .vbat_uv = 3413000, .ri_uohm = 243000 }, + { .vbat_uv = 3393000, .ri_uohm = 285000 }, + { .vbat_uv = 3361000, .ri_uohm = 281000 }, + { .vbat_uv = 3302000, .ri_uohm = 286000 }, + { .vbat_uv = 3280000, .ri_uohm = 250000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb535151vu[] = { + { .vbat_uv = 4190000, .ri_uohm = 214000 }, + { .vbat_uv = 4159000, .ri_uohm = 252000 }, + { .vbat_uv = 4121000, .ri_uohm = 245000 }, + { .vbat_uv = 4069000, .ri_uohm = 228000 }, + { .vbat_uv = 4046000, .ri_uohm = 229000 }, + { .vbat_uv = 4026000, .ri_uohm = 233000 }, + { .vbat_uv = 4007000, .ri_uohm = 240000 }, + { .vbat_uv = 3982000, .ri_uohm = 291000 }, + { .vbat_uv = 3945000, .ri_uohm = 276000 }, + { .vbat_uv = 3924000, .ri_uohm = 266000 }, + { .vbat_uv = 3910000, .ri_uohm = 258000 }, + { .vbat_uv = 3900000, .ri_uohm = 271000 }, + { .vbat_uv = 3844000, .ri_uohm = 279000 }, + { .vbat_uv = 3772000, .ri_uohm = 217000 }, + { .vbat_uv = 3673000, .ri_uohm = 208000 }, + { .vbat_uv = 3571000, .ri_uohm = 208000 }, + { .vbat_uv = 3510000, .ri_uohm = 228000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb585157lu[] = { + { .vbat_uv = 4194000, .ri_uohm = 121000 }, + { .vbat_uv = 4169000, .ri_uohm = 188000 }, + { .vbat_uv = 4136000, .ri_uohm = 173000 }, + { .vbat_uv = 4108000, .ri_uohm = 158000 }, + { .vbat_uv = 4064000, .ri_uohm = 143000 }, + { .vbat_uv = 3956000, .ri_uohm = 160000 }, + { .vbat_uv = 3847000, .ri_uohm = 262000 }, + { .vbat_uv = 3806000, .ri_uohm = 280000 }, + { .vbat_uv = 3801000, .ri_uohm = 266000 }, + { .vbat_uv = 3794000, .ri_uohm = 259000 }, + { .vbat_uv = 3785000, .ri_uohm = 234000 }, + { .vbat_uv = 3779000, .ri_uohm = 227000 }, + { .vbat_uv = 3772000, .ri_uohm = 222000 }, + { .vbat_uv = 3765000, .ri_uohm = 221000 }, + { .vbat_uv = 3759000, .ri_uohm = 216000 }, + { .vbat_uv = 3754000, .ri_uohm = 206000 }, + { .vbat_uv = 3747000, .ri_uohm = 212000 }, + { .vbat_uv = 3743000, .ri_uohm = 208000 }, + { .vbat_uv = 3737000, .ri_uohm = 212000 }, + { .vbat_uv = 3733000, .ri_uohm = 200000 }, + { .vbat_uv = 3728000, .ri_uohm = 203000 }, + { .vbat_uv = 3722000, .ri_uohm = 207000 }, + { .vbat_uv = 3719000, .ri_uohm = 208000 }, + { .vbat_uv = 3715000, .ri_uohm = 209000 }, + { .vbat_uv = 3712000, .ri_uohm = 211000 }, + { .vbat_uv = 3709000, .ri_uohm = 210000 }, + { .vbat_uv = 3704000, .ri_uohm = 216000 }, + { .vbat_uv = 3701000, .ri_uohm = 218000 }, + { .vbat_uv = 3698000, .ri_uohm = 222000 }, + { .vbat_uv = 3694000, .ri_uohm = 218000 }, + { .vbat_uv = 3692000, .ri_uohm = 215000 }, + { .vbat_uv = 3688000, .ri_uohm = 224000 }, + { .vbat_uv = 3686000, .ri_uohm = 224000 }, + { .vbat_uv = 3683000, .ri_uohm = 228000 }, + { .vbat_uv = 3681000, .ri_uohm = 228000 }, + { .vbat_uv = 3679000, .ri_uohm = 229000 }, + { .vbat_uv = 3676000, .ri_uohm = 232000 }, + { .vbat_uv = 3675000, .ri_uohm = 229000 }, + { .vbat_uv = 3673000, .ri_uohm = 229000 }, + { .vbat_uv = 3672000, .ri_uohm = 223000 }, + { .vbat_uv = 3669000, .ri_uohm = 224000 }, + { .vbat_uv = 3666000, .ri_uohm = 224000 }, + { .vbat_uv = 3663000, .ri_uohm = 221000 }, + { .vbat_uv = 3660000, .ri_uohm = 218000 }, + { .vbat_uv = 3657000, .ri_uohm = 215000 }, + { .vbat_uv = 3654000, .ri_uohm = 212000 }, + { .vbat_uv = 3649000, .ri_uohm = 215000 }, + { .vbat_uv = 3644000, .ri_uohm = 215000 }, + { .vbat_uv = 3636000, .ri_uohm = 215000 }, + { .vbat_uv = 3631000, .ri_uohm = 206000 }, + { .vbat_uv = 3623000, .ri_uohm = 205000 }, + { .vbat_uv = 3616000, .ri_uohm = 193000 }, + { .vbat_uv = 3605000, .ri_uohm = 193000 }, + { .vbat_uv = 3600000, .ri_uohm = 198000 }, + { .vbat_uv = 3597000, .ri_uohm = 198000 }, + { .vbat_uv = 3592000, .ri_uohm = 203000 }, + { .vbat_uv = 3591000, .ri_uohm = 188000 }, + { .vbat_uv = 3587000, .ri_uohm = 188000 }, + { .vbat_uv = 3583000, .ri_uohm = 177000 }, + { .vbat_uv = 3577000, .ri_uohm = 170000 }, + { .vbat_uv = 3568000, .ri_uohm = 135000 }, + { .vbat_uv = 3552000, .ri_uohm = 54000 }, + { .vbat_uv = 3526000, .ri_uohm = 130000 }, + { .vbat_uv = 3501000, .ri_uohm = 48000 }, + { .vbat_uv = 3442000, .ri_uohm = 183000 }, + { .vbat_uv = 3326000, .ri_uohm = 372000 }, + { .vbat_uv = 3161000, .ri_uohm = 452000 }, +}; + +static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb585157lu[] = { + { .vbat_uv = 4360000, .ri_uohm = 128000 }, + { .vbat_uv = 4325000, .ri_uohm = 130000 }, + { .vbat_uv = 4316000, .ri_uohm = 148000 }, + { .vbat_uv = 4308000, .ri_uohm = 162000 }, + { .vbat_uv = 4301000, .ri_uohm = 162000 }, + { .vbat_uv = 4250000, .ri_uohm = 162000 }, + { .vbat_uv = 4230000, .ri_uohm = 164000 }, + { .vbat_uv = 4030000, .ri_uohm = 164000 }, + { .vbat_uv = 4000000, .ri_uohm = 193000 }, + { .vbat_uv = 3950000, .ri_uohm = 204000 }, + { .vbat_uv = 3850000, .ri_uohm = 210000 }, + { .vbat_uv = 3800000, .ri_uohm = 230000 }, + { .vbat_uv = 3790000, .ri_uohm = 240000 }, + { .vbat_uv = 3780000, .ri_uohm = 311000 }, + { .vbat_uv = 3760000, .ri_uohm = 420000 }, + { .vbat_uv = 3700000, .ri_uohm = 504000 }, + { .vbat_uv = 3600000, .ri_uohm = 565000 }, +}; + +/* + * Temperature to internal resistance scaling tables. + * + * "resistance" is the percentage of the resistance determined from the voltage + * so this represents the capacity ratio at different temperatures. + * + * FIXME: the proper table is missing: Samsung does not provide the necessary + * temperature compensation tables so we just state 100% for every temperature. + * If you have the datasheets, please provide these tables. + */ +static struct power_supply_resistance_temp_table samsung_temp2res[] = { + { .temp = 50, .resistance = 100 }, + { .temp = 40, .resistance = 100 }, + { .temp = 30, .resistance = 100 }, + { .temp = 20, .resistance = 100 }, + { .temp = 10, .resistance = 100 }, + { .temp = 00, .resistance = 100 }, + { .temp = -10, .resistance = 100 }, + { .temp = -20, .resistance = 100 }, +}; + +/* + * Capacity tables for different Open Circuit Voltages (OCV). + * These must be sorted by falling OCV value. + */ + +static struct power_supply_battery_ocv_table samsung_ocv_cap_eb485159lu[] = { + { .ocv = 4330000, .capacity = 100}, + { .ocv = 4320000, .capacity = 99}, + { .ocv = 4283000, .capacity = 95}, + { .ocv = 4246000, .capacity = 92}, + { .ocv = 4211000, .capacity = 89}, + { .ocv = 4167000, .capacity = 85}, + { .ocv = 4146000, .capacity = 83}, + { .ocv = 4124000, .capacity = 81}, + { .ocv = 4062000, .capacity = 75}, + { .ocv = 4013000, .capacity = 70}, + { .ocv = 3977000, .capacity = 66}, + { .ocv = 3931000, .capacity = 60}, + { .ocv = 3914000, .capacity = 58}, + { .ocv = 3901000, .capacity = 57}, + { .ocv = 3884000, .capacity = 56}, + { .ocv = 3870000, .capacity = 55}, + { .ocv = 3862000, .capacity = 54}, + { .ocv = 3854000, .capacity = 53}, + { .ocv = 3838000, .capacity = 50}, + { .ocv = 3823000, .capacity = 47}, + { .ocv = 3813000, .capacity = 45}, + { .ocv = 3807000, .capacity = 43}, + { .ocv = 3800000, .capacity = 41}, + { .ocv = 3795000, .capacity = 40}, + { .ocv = 3786000, .capacity = 37}, + { .ocv = 3783000, .capacity = 35}, + { .ocv = 3773000, .capacity = 30}, + { .ocv = 3758000, .capacity = 25}, + { .ocv = 3745000, .capacity = 22}, + { .ocv = 3738000, .capacity = 20}, + { .ocv = 3733000, .capacity = 19}, + { .ocv = 3716000, .capacity = 17}, + { .ocv = 3709000, .capacity = 16}, + { .ocv = 3698000, .capacity = 15}, + { .ocv = 3687000, .capacity = 14}, + { .ocv = 3684000, .capacity = 13}, + { .ocv = 3684000, .capacity = 12}, + { .ocv = 3678000, .capacity = 10}, + { .ocv = 3671000, .capacity = 9}, + { .ocv = 3665000, .capacity = 8}, + { .ocv = 3651000, .capacity = 7}, + { .ocv = 3634000, .capacity = 6}, + { .ocv = 3601000, .capacity = 5}, + { .ocv = 3564000, .capacity = 4}, + { .ocv = 3516000, .capacity = 3}, + { .ocv = 3456000, .capacity = 2}, + { .ocv = 3381000, .capacity = 1}, + { .ocv = 3300000, .capacity = 0}, +}; + +/* Same capacity table is used by eb-l1m7flu, eb425161la, eb425161lu */ +static struct power_supply_battery_ocv_table samsung_ocv_cap_1500mah[] = { + { .ocv = 4328000, .capacity = 100}, + { .ocv = 4299000, .capacity = 99}, + { .ocv = 4281000, .capacity = 98}, + { .ocv = 4241000, .capacity = 95}, + { .ocv = 4183000, .capacity = 90}, + { .ocv = 4150000, .capacity = 87}, + { .ocv = 4116000, .capacity = 84}, + { .ocv = 4077000, .capacity = 80}, + { .ocv = 4068000, .capacity = 79}, + { .ocv = 4058000, .capacity = 77}, + { .ocv = 4026000, .capacity = 75}, + { .ocv = 3987000, .capacity = 72}, + { .ocv = 3974000, .capacity = 69}, + { .ocv = 3953000, .capacity = 66}, + { .ocv = 3933000, .capacity = 63}, + { .ocv = 3911000, .capacity = 60}, + { .ocv = 3900000, .capacity = 58}, + { .ocv = 3873000, .capacity = 55}, + { .ocv = 3842000, .capacity = 52}, + { .ocv = 3829000, .capacity = 50}, + { .ocv = 3810000, .capacity = 45}, + { .ocv = 3793000, .capacity = 40}, + { .ocv = 3783000, .capacity = 35}, + { .ocv = 3776000, .capacity = 30}, + { .ocv = 3762000, .capacity = 25}, + { .ocv = 3746000, .capacity = 20}, + { .ocv = 3739000, .capacity = 18}, + { .ocv = 3715000, .capacity = 15}, + { .ocv = 3700000, .capacity = 12}, + { .ocv = 3690000, .capacity = 10}, + { .ocv = 3680000, .capacity = 9}, + { .ocv = 3670000, .capacity = 7}, + { .ocv = 3656000, .capacity = 5}, + { .ocv = 3634000, .capacity = 4}, + { .ocv = 3614000, .capacity = 3}, + { .ocv = 3551000, .capacity = 2}, + { .ocv = 3458000, .capacity = 1}, + { .ocv = 3300000, .capacity = 0}, +}; + +static struct power_supply_battery_ocv_table samsung_ocv_cap_eb535151vu[] = { + { .ocv = 4178000, .capacity = 100}, + { .ocv = 4148000, .capacity = 99}, + { .ocv = 4105000, .capacity = 95}, + { .ocv = 4078000, .capacity = 92}, + { .ocv = 4057000, .capacity = 89}, + { .ocv = 4013000, .capacity = 85}, + { .ocv = 3988000, .capacity = 82}, + { .ocv = 3962000, .capacity = 77}, + { .ocv = 3920000, .capacity = 70}, + { .ocv = 3891000, .capacity = 65}, + { .ocv = 3874000, .capacity = 62}, + { .ocv = 3839000, .capacity = 59}, + { .ocv = 3816000, .capacity = 55}, + { .ocv = 3798000, .capacity = 50}, + { .ocv = 3778000, .capacity = 40}, + { .ocv = 3764000, .capacity = 30}, + { .ocv = 3743000, .capacity = 25}, + { .ocv = 3711000, .capacity = 20}, + { .ocv = 3691000, .capacity = 18}, + { .ocv = 3685000, .capacity = 15}, + { .ocv = 3680000, .capacity = 12}, + { .ocv = 3662000, .capacity = 10}, + { .ocv = 3638000, .capacity = 9}, + { .ocv = 3593000, .capacity = 7}, + { .ocv = 3566000, .capacity = 6}, + { .ocv = 3497000, .capacity = 4}, + { .ocv = 3405000, .capacity = 2}, + { .ocv = 3352000, .capacity = 1}, + { .ocv = 3300000, .capacity = 0}, +}; + +static struct power_supply_battery_ocv_table samsung_ocv_cap_eb585157lu[] = { + { .ocv = 4320000, .capacity = 100}, + { .ocv = 4296000, .capacity = 99}, + { .ocv = 4283000, .capacity = 98}, + { .ocv = 4245000, .capacity = 95}, + { .ocv = 4185000, .capacity = 90}, + { .ocv = 4152000, .capacity = 87}, + { .ocv = 4119000, .capacity = 84}, + { .ocv = 4077000, .capacity = 80}, + { .ocv = 4057000, .capacity = 78}, + { .ocv = 4048000, .capacity = 77}, + { .ocv = 4020000, .capacity = 74}, + { .ocv = 4003000, .capacity = 72}, + { .ocv = 3978000, .capacity = 69}, + { .ocv = 3955000, .capacity = 66}, + { .ocv = 3934000, .capacity = 63}, + { .ocv = 3912000, .capacity = 60}, + { .ocv = 3894000, .capacity = 58}, + { .ocv = 3860000, .capacity = 55}, + { .ocv = 3837000, .capacity = 52}, + { .ocv = 3827000, .capacity = 50}, + { .ocv = 3806000, .capacity = 45}, + { .ocv = 3791000, .capacity = 40}, + { .ocv = 3779000, .capacity = 35}, + { .ocv = 3770000, .capacity = 30}, + { .ocv = 3758000, .capacity = 25}, + { .ocv = 3739000, .capacity = 20}, + { .ocv = 3730000, .capacity = 18}, + { .ocv = 3706000, .capacity = 15}, + { .ocv = 3684000, .capacity = 13}, + { .ocv = 3675000, .capacity = 10}, + { .ocv = 3673000, .capacity = 9}, + { .ocv = 3665000, .capacity = 7}, + { .ocv = 3649000, .capacity = 5}, + { .ocv = 3628000, .capacity = 4}, + { .ocv = 3585000, .capacity = 3}, + { .ocv = 3525000, .capacity = 2}, + { .ocv = 3441000, .capacity = 1}, + { .ocv = 3300000, .capacity = 0}, +}; + +static struct power_supply_maintenance_charge_table samsung_maint_charge_table[] = { + { + /* Maintenance charging phase A, 60 hours */ + .charge_current_max_ua = 600000, + .charge_voltage_max_uv = 4150000, + .charge_safety_timer_minutes = 60*60, + }, + { + /* Maintenance charging phase B, 200 hours */ + .charge_current_max_ua = 600000, + .charge_voltage_max_uv = 4100000, + .charge_safety_timer_minutes = 200*60, + } +}; + +static struct samsung_sdi_battery samsung_sdi_batteries[] = { + { + /* + * Used in Samsung GT-I8190 "Golden" + * Data from vendor boardfile board-golden-[bm|battery].c + */ + .compatible = "samsung,eb-l1m7flu", + .name = "EB-L1M7FLU", + .info = { + .charge_full_design_uah = 1500000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 100000, + .factory_internal_resistance_charging_uohm = 200000, + /* If you have data on this fix the min_design_uv */ + .voltage_min_design_uv = 3320000, + .voltage_max_design_uv = 4340000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 900000, + .constant_charge_voltage_max_uv = 4320000, + .charge_term_current_ua = 200000, + .charge_restart_voltage_uv = 4300000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -50, + .temp_alert_min = 0, + .temp_alert_max = 40, + .temp_max = 60, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_1500mah, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah), + .vbat2ri_discharging = samsung_vbat2res_discharging_eb_l1m7flu, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb_l1m7flu), + .vbat2ri_charging = samsung_vbat2res_charging_eb_l1m7flu, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb_l1m7flu), + .bti_resistance_ohm = 2400, + .bti_resistance_tolerance = 40, + }, + }, + { + /* + * Used in Samsung SGH-T599 "Codina TMO" and SGH-I407 "Kyle" + * Data from vendor boardfile board-kyle-[bm|battery].c + */ + .compatible = "samsung,eb425161la", + .name = "EB425161LA", + .info = { + .charge_full_design_uah = 1500000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 136000, + .factory_internal_resistance_charging_uohm = 200000, + /* If you have data on this fix the min_design_uv */ + .voltage_min_design_uv = 3320000, + .voltage_max_design_uv = 4340000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 900000, + .constant_charge_voltage_max_uv = 4320000, + .charge_term_current_ua = 200000, + .charge_restart_voltage_uv = 4270000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -30, + .temp_alert_min = 0, + .temp_alert_max = 40, + .temp_max = 47, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_1500mah, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah), + .vbat2ri_discharging = samsung_vbat2res_discharging_eb425161la, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb425161la), + .vbat2ri_charging = samsung_vbat2res_charging_eb425161la, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb425161la), + .bti_resistance_ohm = 2400, + .bti_resistance_tolerance = 40, + }, + }, + { + /* + * Used in Samsung GT-I8160 "Codina" + * Data from vendor boardfile board-codina-[bm|battery].c + */ + .compatible = "samsung,eb425161lu", + .name = "EB425161LU", + .info = { + .charge_full_design_uah = 1500000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 100000, + .factory_internal_resistance_charging_uohm = 200000, + /* If you have data on this fix the min_design_uv */ + .voltage_min_design_uv = 3320000, + .voltage_max_design_uv = 4350000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 900000, + .constant_charge_voltage_max_uv = 4340000, + .charge_term_current_ua = 200000, + .charge_restart_voltage_uv = 4280000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -50, + .temp_alert_min = 0, + .temp_alert_max = 43, + .temp_max = 49, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_1500mah, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah), + .vbat2ri_discharging = samsung_vbat2res_discharging_eb425161lu, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb425161lu), + .vbat2ri_charging = samsung_vbat2res_charging_eb425161lu, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb425161lu), + .bti_resistance_ohm = 2400, + .bti_resistance_tolerance = 40, + }, + }, + { + /* + * Used in Samsung GT-S7710 "Skomer" + * Data from vendor boardfile board-skomer-[bm|battery].c + */ + .compatible = "samsung,eb485159lu", + .name = "EB485159LU", + .info = { + .charge_full_design_uah = 1700000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 100000, + .factory_internal_resistance_charging_uohm = 200000, + .voltage_min_design_uv = 3320000, + .voltage_max_design_uv = 4350000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 900000, + .constant_charge_voltage_max_uv = 4340000, + .charge_term_current_ua = 200000, + .charge_restart_voltage_uv = 4300000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -50, + .temp_alert_min = 0, + .temp_alert_max = 40, + .temp_max = 60, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_eb485159lu, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb485159lu), + /* CHECKME: vendor uses the 1500 mAh table, check against datasheet */ + .vbat2ri_discharging = samsung_vbat2res_discharging_eb485159lu, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb485159lu), + .vbat2ri_charging = samsung_vbat2res_charging_eb485159lu, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb485159lu), + .bti_resistance_ohm = 2400, + .bti_resistance_tolerance = 40, + }, + }, + { + /* + * Used in Samsung GT-I9070 "Janice" + * Data from vendor boardfile board-janice-bm.c + */ + .compatible = "samsung,eb535151vu", + .name = "EB535151VU", + .info = { + .charge_full_design_uah = 1500000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 100000, + .factory_internal_resistance_charging_uohm = 200000, + /* If you have data on this fix the min_design_uv */ + .voltage_min_design_uv = 3300000, + .voltage_max_design_uv = 4180000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 900000, + .constant_charge_voltage_max_uv = 4200000, + .charge_term_current_ua = 200000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -5, + .temp_alert_min = 0, + .temp_alert_max = 40, + .temp_max = 60, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_eb535151vu, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb535151vu), + .vbat2ri_discharging = samsung_vbat2res_discharging_eb535151vu, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb535151vu), + .vbat2ri_charging = samsung_vbat2res_charging_eb535151vu, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb535151vu), + .bti_resistance_ohm = 1500, + .bti_resistance_tolerance = 40, + }, + }, + { + /* + * Used in Samsung GT-I8530 "Gavini" + * Data from vendor boardfile board-gavini-bm.c + */ + .compatible = "samsung,eb585157lu", + .name = "EB585157LU", + .info = { + .charge_full_design_uah = 2000000, + .technology = POWER_SUPPLY_TECHNOLOGY_LION, + .factory_internal_resistance_uohm = 105000, + .factory_internal_resistance_charging_uohm = 160000, + /* If you have data on this fix the min_design_uv */ + .voltage_min_design_uv = 3300000, + .voltage_max_design_uv = 4320000, + .overvoltage_limit_uv = 4500000, + .constant_charge_current_max_ua = 1500000, + .constant_charge_voltage_max_uv = 4350000, + .charge_term_current_ua = 120000, + .maintenance_charge = samsung_maint_charge_table, + .maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table), + .alert_low_temp_charge_current_ua = 300000, + .alert_low_temp_charge_voltage_uv = 4000000, + .alert_high_temp_charge_current_ua = 300000, + .alert_high_temp_charge_voltage_uv = 4000000, + .temp_min = -5, + .temp_alert_min = 0, + .temp_alert_max = 40, + .temp_max = 60, + .resist_table = samsung_temp2res, + .resist_table_size = ARRAY_SIZE(samsung_temp2res), + /* If you have tables for more temperatures, add them */ + .ocv_temp[0] = 25, + .ocv_table[0] = samsung_ocv_cap_eb585157lu, + .ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb585157lu), + .vbat2ri_discharging = samsung_vbat2res_discharging_eb585157lu, + .vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb585157lu), + .vbat2ri_charging = samsung_vbat2res_charging_eb585157lu, + .vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb585157lu), + .bti_resistance_ohm = 2400, + .bti_resistance_tolerance = 40, + }, + }, +}; + +int samsung_sdi_battery_get_info(struct device *dev, + const char *compatible, + struct power_supply_battery_info **info) +{ + struct samsung_sdi_battery *batt; + int i; + + for (i = 0; i < ARRAY_SIZE(samsung_sdi_batteries); i++) { + batt = &samsung_sdi_batteries[i]; + if (!strcmp(compatible, batt->compatible)) + break; + } + + if (i == ARRAY_SIZE(samsung_sdi_batteries)) + return -ENODEV; + + *info = &batt->info; + dev_info(dev, "Samsung SDI %s battery %d mAh\n", + batt->name, batt->info.charge_full_design_uah / 1000); + + return 0; +} +EXPORT_SYMBOL_GPL(samsung_sdi_battery_get_info); diff --git a/drivers/power/supply/samsung-sdi-battery.h b/drivers/power/supply/samsung-sdi-battery.h new file mode 100644 index 000000000000..365ab6e85b26 --- /dev/null +++ b/drivers/power/supply/samsung-sdi-battery.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#if IS_ENABLED(CONFIG_BATTERY_SAMSUNG_SDI) +extern int samsung_sdi_battery_get_info(struct device *dev, + const char *compatible, + struct power_supply_battery_info **info); +#else +static inline int samsung_sdi_battery_get_info(struct device *dev, + const char *compatible, + struct power_supply_battery_info **info) +{ + return -ENODEV; +} +#endif diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c index 6fa65d118ec1..b08f7d0c4181 100644 --- a/drivers/power/supply/sbs-charger.c +++ b/drivers/power/supply/sbs-charger.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/regmap.h> #include <linux/bitops.h> +#include <linux/devm-helpers.h> #define SBS_CHARGER_REG_SPEC_INFO 0x11 #define SBS_CHARGER_REG_STATUS 0x13 @@ -209,7 +210,12 @@ static int sbs_probe(struct i2c_client *client, if (ret) return dev_err_probe(&client->dev, ret, "Failed to request irq\n"); } else { - INIT_DELAYED_WORK(&chip->work, sbs_delayed_work); + ret = devm_delayed_work_autocancel(&client->dev, &chip->work, + sbs_delayed_work); + if (ret) + return dev_err_probe(&client->dev, ret, + "Failed to init work for polling\n"); + schedule_delayed_work(&chip->work, msecs_to_jiffies(SBS_CHARGER_POLL_TIME)); } @@ -220,15 +226,6 @@ static int sbs_probe(struct i2c_client *client, return 0; } -static int sbs_remove(struct i2c_client *client) -{ - struct sbs_info *chip = i2c_get_clientdata(client); - - cancel_delayed_work_sync(&chip->work); - - return 0; -} - #ifdef CONFIG_OF static const struct of_device_id sbs_dt_ids[] = { { .compatible = "sbs,sbs-charger" }, @@ -245,7 +242,6 @@ MODULE_DEVICE_TABLE(i2c, sbs_id); static struct i2c_driver sbs_driver = { .probe = sbs_probe, - .remove = sbs_remove, .id_table = sbs_id, .driver = { .name = "sbs-charger", diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c index d56e469043bb..1511f71f937c 100644 --- a/drivers/power/supply/smb347-charger.c +++ b/drivers/power/supply/smb347-charger.c @@ -1488,8 +1488,7 @@ static const struct regmap_config smb347_regmap = { .max_register = SMB347_MAX_REGISTER, .volatile_reg = smb347_volatile_reg, .readable_reg = smb347_readable_reg, - .cache_type = REGCACHE_FLAT, - .num_reg_defaults_raw = SMB347_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, }; static const struct regulator_ops smb347_usb_vbus_regulator_ops = { diff --git a/drivers/power/supply/ug3105_battery.c b/drivers/power/supply/ug3105_battery.c new file mode 100644 index 000000000000..fbc966842509 --- /dev/null +++ b/drivers/power/supply/ug3105_battery.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Battery monitor driver for the uPI uG3105 battery monitor + * + * Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead it is + * expected to be use in combination with some always on microcontroller reading + * its coulomb-counter before it can wrap (must be read every 400 seconds!). + * + * Since Linux does not monitor coulomb-counter changes while the device + * is off or suspended, the coulomb counter is not used atm. + * + * Possible improvements: + * 1. Activate commented out total_coulomb_count code + * 2. Reset total_coulomb_count val to 0 when the battery is as good as empty + * and remember that we did this (and clear the flag for this on susp/resume) + * 3. When the battery is full check if the flag that we set total_coulomb_count + * to when the battery was empty is set. If so we now know the capacity, + * not the design, but actual capacity, of the battery + * 4. Add some mechanism (needs userspace help, or maybe use efivar?) to remember + * the actual capacity of the battery over reboots + * 5. When we know the actual capacity at probe time, add energy_now and + * energy_full attributes. Guess boot + resume energy_now value based on ocv + * and then use total_coulomb_count to report energy_now over time, resetting + * things to adjust for drift when empty/full. This should give more accurate + * readings, esp. in the 30-70% range and allow userspace to estimate time + * remaining till empty/full + * 6. Maybe unregister + reregister the psy device when we learn the actual + * capacity during run-time ? + * + * The above will also require some sort of mwh_per_unit calculation. Testing + * has shown that an estimated 7404mWh increase of the battery's energy results + * in a total_coulomb_count increase of 3277 units with a 5 milli-ohm sense R. + * + * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/devm-helpers.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/power_supply.h> +#include <linux/workqueue.h> + +#define UG3105_MOV_AVG_WINDOW 8 +#define UG3105_INIT_POLL_TIME (5 * HZ) +#define UG3105_POLL_TIME (30 * HZ) +#define UG3105_SETTLE_TIME (1 * HZ) + +#define UG3105_INIT_POLL_COUNT 30 + +#define UG3105_REG_MODE 0x00 +#define UG3105_REG_CTRL1 0x01 +#define UG3105_REG_COULOMB_CNT 0x02 +#define UG3105_REG_BAT_VOLT 0x08 +#define UG3105_REG_BAT_CURR 0x0c + +#define UG3105_MODE_STANDBY 0x00 +#define UG3105_MODE_RUN 0x10 + +#define UG3105_CTRL1_RESET_COULOMB_CNT 0x03 + +#define UG3105_CURR_HYST_UA 65000 + +#define UG3105_LOW_BAT_UV 3700000 +#define UG3105_FULL_BAT_HYST_UV 38000 + +struct ug3105_chip { + struct i2c_client *client; + struct power_supply *psy; + struct power_supply_battery_info *info; + struct delayed_work work; + struct mutex lock; + int ocv[UG3105_MOV_AVG_WINDOW]; /* micro-volt */ + int intern_res[UG3105_MOV_AVG_WINDOW]; /* milli-ohm */ + int poll_count; + int ocv_avg_index; + int ocv_avg; /* micro-volt */ + int intern_res_poll_count; + int intern_res_avg_index; + int intern_res_avg; /* milli-ohm */ + int volt; /* micro-volt */ + int curr; /* micro-ampere */ + int total_coulomb_count; + int uv_per_unit; + int ua_per_unit; + int status; + int capacity; + bool supplied; +}; + +static int ug3105_read_word(struct i2c_client *client, u8 reg) +{ + int val; + + val = i2c_smbus_read_word_data(client, reg); + if (val < 0) + dev_err(&client->dev, "Error reading reg 0x%02x\n", reg); + + return val; +} + +static int ug3105_get_status(struct ug3105_chip *chip) +{ + int full = chip->info->constant_charge_voltage_max_uv - UG3105_FULL_BAT_HYST_UV; + + if (chip->curr > UG3105_CURR_HYST_UA) + return POWER_SUPPLY_STATUS_CHARGING; + + if (chip->curr < -UG3105_CURR_HYST_UA) + return POWER_SUPPLY_STATUS_DISCHARGING; + + if (chip->supplied && chip->ocv_avg > full) + return POWER_SUPPLY_STATUS_FULL; + + return POWER_SUPPLY_STATUS_NOT_CHARGING; +} + +static int ug3105_get_capacity(struct ug3105_chip *chip) +{ + /* + * OCV voltages in uV for 0-110% in 5% increments, the 100-110% is + * for LiPo HV (High-Voltage) bateries which can go up to 4.35V + * instead of the usual 4.2V. + */ + static const int ocv_capacity_tbl[23] = { + 3350000, + 3610000, + 3690000, + 3710000, + 3730000, + 3750000, + 3770000, + 3786667, + 3803333, + 3820000, + 3836667, + 3853333, + 3870000, + 3907500, + 3945000, + 3982500, + 4020000, + 4075000, + 4110000, + 4150000, + 4200000, + 4250000, + 4300000, + }; + int i, ocv_diff, ocv_step; + + if (chip->ocv_avg < ocv_capacity_tbl[0]) + return 0; + + if (chip->status == POWER_SUPPLY_STATUS_FULL) + return 100; + + for (i = 1; i < ARRAY_SIZE(ocv_capacity_tbl); i++) { + if (chip->ocv_avg > ocv_capacity_tbl[i]) + continue; + + ocv_diff = ocv_capacity_tbl[i] - chip->ocv_avg; + ocv_step = ocv_capacity_tbl[i] - ocv_capacity_tbl[i - 1]; + /* scale 0-110% down to 0-100% for LiPo HV */ + if (chip->info->constant_charge_voltage_max_uv >= 4300000) + return (i * 500 - ocv_diff * 500 / ocv_step) / 110; + else + return i * 5 - ocv_diff * 5 / ocv_step; + } + + return 100; +} + +static void ug3105_work(struct work_struct *work) +{ + struct ug3105_chip *chip = container_of(work, struct ug3105_chip, + work.work); + int i, val, curr_diff, volt_diff, res, win_size; + bool prev_supplied = chip->supplied; + int prev_status = chip->status; + int prev_volt = chip->volt; + int prev_curr = chip->curr; + struct power_supply *psy; + + mutex_lock(&chip->lock); + + psy = chip->psy; + if (!psy) + goto out; + + val = ug3105_read_word(chip->client, UG3105_REG_BAT_VOLT); + if (val < 0) + goto out; + chip->volt = val * chip->uv_per_unit; + + val = ug3105_read_word(chip->client, UG3105_REG_BAT_CURR); + if (val < 0) + goto out; + chip->curr = (s16)val * chip->ua_per_unit; + + chip->ocv[chip->ocv_avg_index] = + chip->volt - chip->curr * chip->intern_res_avg / 1000; + chip->ocv_avg_index = (chip->ocv_avg_index + 1) % UG3105_MOV_AVG_WINDOW; + chip->poll_count++; + + /* + * See possible improvements comment above. + * + * Read + reset coulomb counter every 10 polls (every 300 seconds) + * if ((chip->poll_count % 10) == 0) { + * val = ug3105_read_word(chip->client, UG3105_REG_COULOMB_CNT); + * if (val < 0) + * goto out; + * + * i2c_smbus_write_byte_data(chip->client, UG3105_REG_CTRL1, + * UG3105_CTRL1_RESET_COULOMB_CNT); + * + * chip->total_coulomb_count += (s16)val; + * dev_dbg(&chip->client->dev, "coulomb count %d total %d\n", + * (s16)val, chip->total_coulomb_count); + * } + */ + + chip->ocv_avg = 0; + win_size = min(chip->poll_count, UG3105_MOV_AVG_WINDOW); + for (i = 0; i < win_size; i++) + chip->ocv_avg += chip->ocv[i]; + chip->ocv_avg /= win_size; + + chip->supplied = power_supply_am_i_supplied(psy); + chip->status = ug3105_get_status(chip); + chip->capacity = ug3105_get_capacity(chip); + + /* + * Skip internal resistance calc on charger [un]plug and + * when the battery is almost empty (voltage low). + */ + if (chip->supplied != prev_supplied || + chip->volt < UG3105_LOW_BAT_UV || + chip->poll_count < 2) + goto out; + + /* + * Assuming that the OCV voltage does not change significantly + * between 2 polls, then we can calculate the internal resistance + * on a significant current change by attributing all voltage + * change between the 2 readings to the internal resistance. + */ + curr_diff = abs(chip->curr - prev_curr); + if (curr_diff < UG3105_CURR_HYST_UA) + goto out; + + volt_diff = abs(chip->volt - prev_volt); + res = volt_diff * 1000 / curr_diff; + + if ((res < (chip->intern_res_avg * 2 / 3)) || + (res > (chip->intern_res_avg * 4 / 3))) { + dev_dbg(&chip->client->dev, "Ignoring outlier internal resistance %d mOhm\n", res); + goto out; + } + + dev_dbg(&chip->client->dev, "Internal resistance %d mOhm\n", res); + + chip->intern_res[chip->intern_res_avg_index] = res; + chip->intern_res_avg_index = (chip->intern_res_avg_index + 1) % UG3105_MOV_AVG_WINDOW; + chip->intern_res_poll_count++; + + chip->intern_res_avg = 0; + win_size = min(chip->intern_res_poll_count, UG3105_MOV_AVG_WINDOW); + for (i = 0; i < win_size; i++) + chip->intern_res_avg += chip->intern_res[i]; + chip->intern_res_avg /= win_size; + +out: + mutex_unlock(&chip->lock); + + queue_delayed_work(system_wq, &chip->work, + (chip->poll_count <= UG3105_INIT_POLL_COUNT) ? + UG3105_INIT_POLL_TIME : UG3105_POLL_TIME); + + if (chip->status != prev_status && psy) + power_supply_changed(psy); +} + +static enum power_supply_property ug3105_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_OCV, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, +}; + +static int ug3105_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ug3105_chip *chip = power_supply_get_drvdata(psy); + int ret = 0; + + mutex_lock(&chip->lock); + + if (!chip->psy) { + ret = -EAGAIN; + goto out; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = chip->status; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = chip->info->technology; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ug3105_read_word(chip->client, UG3105_REG_BAT_VOLT); + if (ret < 0) + break; + val->intval = ret * chip->uv_per_unit; + ret = 0; + break; + case POWER_SUPPLY_PROP_VOLTAGE_OCV: + val->intval = chip->ocv_avg; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ug3105_read_word(chip->client, UG3105_REG_BAT_CURR); + if (ret < 0) + break; + val->intval = (s16)ret * chip->ua_per_unit; + ret = 0; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = chip->capacity; + break; + default: + ret = -EINVAL; + } + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static void ug3105_external_power_changed(struct power_supply *psy) +{ + struct ug3105_chip *chip = power_supply_get_drvdata(psy); + + dev_dbg(&chip->client->dev, "external power changed\n"); + mod_delayed_work(system_wq, &chip->work, UG3105_SETTLE_TIME); +} + +static const struct power_supply_desc ug3105_psy_desc = { + .name = "ug3105_battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = ug3105_get_property, + .external_power_changed = ug3105_external_power_changed, + .properties = ug3105_battery_props, + .num_properties = ARRAY_SIZE(ug3105_battery_props), +}; + +static void ug3105_init(struct ug3105_chip *chip) +{ + chip->poll_count = 0; + chip->ocv_avg_index = 0; + chip->total_coulomb_count = 0; + i2c_smbus_write_byte_data(chip->client, UG3105_REG_MODE, + UG3105_MODE_RUN); + i2c_smbus_write_byte_data(chip->client, UG3105_REG_CTRL1, + UG3105_CTRL1_RESET_COULOMB_CNT); + queue_delayed_work(system_wq, &chip->work, 0); + flush_delayed_work(&chip->work); +} + +static int ug3105_probe(struct i2c_client *client) +{ + struct power_supply_config psy_cfg = {}; + struct device *dev = &client->dev; + u32 curr_sense_res_uohm = 10000; + struct power_supply *psy; + struct ug3105_chip *chip; + int ret; + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + mutex_init(&chip->lock); + ret = devm_delayed_work_autocancel(dev, &chip->work, ug3105_work); + if (ret) + return ret; + + psy_cfg.drv_data = chip; + psy = devm_power_supply_register(dev, &ug3105_psy_desc, &psy_cfg); + if (IS_ERR(psy)) + return PTR_ERR(psy); + + ret = power_supply_get_battery_info(psy, &chip->info); + if (ret) + return ret; + + if (chip->info->factory_internal_resistance_uohm == -EINVAL || + chip->info->constant_charge_voltage_max_uv == -EINVAL) { + dev_err(dev, "error required properties are missing\n"); + return -ENODEV; + } + + device_property_read_u32(dev, "upisemi,rsns-microohm", &curr_sense_res_uohm); + + /* + * DAC maximum is 4.5V divided by 65536 steps + an unknown factor of 10 + * coming from somewhere for some reason (verified with a volt-meter). + */ + chip->uv_per_unit = 45000000/65536; + /* Datasheet says 8.1 uV per unit for the current ADC */ + chip->ua_per_unit = 8100000 / curr_sense_res_uohm; + + /* Use provided internal resistance as start point (in milli-ohm) */ + chip->intern_res_avg = chip->info->factory_internal_resistance_uohm / 1000; + /* Also add it to the internal resistance moving average window */ + chip->intern_res[0] = chip->intern_res_avg; + chip->intern_res_avg_index = 1; + chip->intern_res_poll_count = 1; + + mutex_lock(&chip->lock); + chip->psy = psy; + mutex_unlock(&chip->lock); + + ug3105_init(chip); + + i2c_set_clientdata(client, chip); + return 0; +} + +static int __maybe_unused ug3105_suspend(struct device *dev) +{ + struct ug3105_chip *chip = dev_get_drvdata(dev); + + cancel_delayed_work_sync(&chip->work); + i2c_smbus_write_byte_data(chip->client, UG3105_REG_MODE, + UG3105_MODE_STANDBY); + + return 0; +} + +static int __maybe_unused ug3105_resume(struct device *dev) +{ + struct ug3105_chip *chip = dev_get_drvdata(dev); + + ug3105_init(chip); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ug3105_pm_ops, ug3105_suspend, + ug3105_resume); + +static const struct i2c_device_id ug3105_id[] = { + { "ug3105" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ug3105_id); + +static struct i2c_driver ug3105_i2c_driver = { + .driver = { + .name = "ug3105", + .pm = &ug3105_pm_ops, + }, + .probe_new = ug3105_probe, + .id_table = ug3105_id, +}; +module_i2c_driver(ug3105_i2c_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("uPI uG3105 battery monitor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c index e05cee457471..908cfd45d262 100644 --- a/drivers/power/supply/wm8350_power.c +++ b/drivers/power/supply/wm8350_power.c @@ -408,44 +408,112 @@ static const struct power_supply_desc wm8350_usb_desc = { * Initialisation *********************************************************************/ -static void wm8350_init_charger(struct wm8350 *wm8350) +static int wm8350_init_charger(struct wm8350 *wm8350) { + int ret; + /* register our interest in charger events */ - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350_charger_handler, 0, "Battery hot", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, + if (ret) + goto err; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350_charger_handler, 0, "Battery cold", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, + if (ret) + goto free_chg_bat_hot; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350_charger_handler, 0, "Battery fail", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, + if (ret) + goto free_chg_bat_cold; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350_charger_handler, 0, "Charger timeout", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, + if (ret) + goto free_chg_bat_fail; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, wm8350_charger_handler, 0, "Charge end", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, + if (ret) + goto free_chg_to; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, wm8350_charger_handler, 0, "Charge start", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, + if (ret) + goto free_chg_end; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350_charger_handler, 0, "Fast charge ready", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, + if (ret) + goto free_chg_start; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350_charger_handler, 0, "Battery <3.9V", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, + if (ret) + goto free_chg_fast_rdy; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350_charger_handler, 0, "Battery <3.1V", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, + if (ret) + goto free_chg_vbatt_lt_3p9; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350_charger_handler, 0, "Battery <2.85V", wm8350); + if (ret) + goto free_chg_vbatt_lt_3p1; /* and supply change events */ - wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350_charger_handler, 0, "USB", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, + if (ret) + goto free_chg_vbatt_lt_2p85; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350_charger_handler, 0, "Wall", wm8350); - wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, + if (ret) + goto free_ext_usb_fb; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350_charger_handler, 0, "Battery", wm8350); + if (ret) + goto free_ext_wall_fb; + + return 0; + +free_ext_wall_fb: + wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350); +free_ext_usb_fb: + wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350); +free_chg_vbatt_lt_2p85: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350); +free_chg_vbatt_lt_3p1: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350); +free_chg_vbatt_lt_3p9: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350); +free_chg_fast_rdy: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350); +free_chg_start: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350); +free_chg_end: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350); +free_chg_to: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350); +free_chg_bat_fail: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350); +free_chg_bat_cold: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350); +free_chg_bat_hot: + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350); +err: + return ret; } static void free_charger_irq(struct wm8350 *wm8350) @@ -456,6 +524,7 @@ static void free_charger_irq(struct wm8350 *wm8350) wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350); diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h index 6a88e34cb955..945bde1fe55c 100644 --- a/include/linux/mfd/intel_soc_pmic.h +++ b/include/linux/mfd/intel_soc_pmic.h @@ -13,6 +13,13 @@ #include <linux/regmap.h> +enum intel_cht_wc_models { + INTEL_CHT_WC_UNKNOWN, + INTEL_CHT_WC_GPD_WIN_POCKET, + INTEL_CHT_WC_XIAOMI_MIPAD2, + INTEL_CHT_WC_LENOVO_YOGABOOK1, +}; + /** * struct intel_soc_pmic - Intel SoC PMIC data * @irq: Master interrupt number of the parent PMIC device @@ -39,6 +46,7 @@ struct intel_soc_pmic { struct regmap_irq_chip_data *irq_chip_data_crit; struct device *dev; struct intel_scu_ipc_dev *scu; + enum intel_cht_wc_models cht_wc_model; }; int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address, diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 728735aed980..c23554531961 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -3386,6 +3386,9 @@ enum ec_mkbp_event { /* Send an incoming CEC message to the AP */ EC_MKBP_EVENT_CEC_MESSAGE = 9, + /* Peripheral device charger event */ + EC_MKBP_EVENT_PCHG = 12, + /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; @@ -5527,6 +5530,67 @@ enum pchg_state { [PCHG_STATE_CONNECTED] = "CONNECTED", \ } +/* + * Update firmware of peripheral chip + */ +#define EC_CMD_PCHG_UPDATE 0x0136 + +/* Port number is encoded in bit[28:31]. */ +#define EC_MKBP_PCHG_PORT_SHIFT 28 +/* Utility macro for converting MKBP event to port number. */ +#define EC_MKBP_PCHG_EVENT_TO_PORT(e) (((e) >> EC_MKBP_PCHG_PORT_SHIFT) & 0xf) +/* Utility macro for extracting event bits. */ +#define EC_MKBP_PCHG_EVENT_MASK(e) ((e) \ + & GENMASK(EC_MKBP_PCHG_PORT_SHIFT-1, 0)) + +#define EC_MKBP_PCHG_UPDATE_OPENED BIT(0) +#define EC_MKBP_PCHG_WRITE_COMPLETE BIT(1) +#define EC_MKBP_PCHG_UPDATE_CLOSED BIT(2) +#define EC_MKBP_PCHG_UPDATE_ERROR BIT(3) +#define EC_MKBP_PCHG_DEVICE_EVENT BIT(4) + +enum ec_pchg_update_cmd { + /* Reset chip to normal mode. */ + EC_PCHG_UPDATE_CMD_RESET_TO_NORMAL = 0, + /* Reset and put a chip in update (a.k.a. download) mode. */ + EC_PCHG_UPDATE_CMD_OPEN, + /* Write a block of data containing FW image. */ + EC_PCHG_UPDATE_CMD_WRITE, + /* Close update session. */ + EC_PCHG_UPDATE_CMD_CLOSE, + /* End of commands */ + EC_PCHG_UPDATE_CMD_COUNT, +}; + +struct ec_params_pchg_update { + /* PCHG port number */ + uint8_t port; + /* enum ec_pchg_update_cmd */ + uint8_t cmd; + /* Padding */ + uint8_t reserved0; + uint8_t reserved1; + /* Version of new firmware */ + uint32_t version; + /* CRC32 of new firmware */ + uint32_t crc32; + /* Address in chip memory where <data> is written to */ + uint32_t addr; + /* Size of <data> */ + uint32_t size; + /* Partial data of new firmware */ + uint8_t data[]; +} __ec_align4; + +BUILD_ASSERT(EC_PCHG_UPDATE_CMD_COUNT + < BIT(sizeof(((struct ec_params_pchg_update *)0)->cmd)*8)); + +struct ec_response_pchg_update { + /* Block size */ + uint32_t block_size; +} __ec_align4; + + /*****************************************************************************/ /* Voltage regulator controls */ diff --git a/include/linux/power/bq25890_charger.h b/include/linux/power/bq25890_charger.h new file mode 100644 index 000000000000..c706ddb77a08 --- /dev/null +++ b/include/linux/power/bq25890_charger.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Platform data for the TI bq25890 battery charger driver. + */ + +#ifndef _BQ25890_CHARGER_H_ +#define _BQ25890_CHARGER_H_ + +struct regulator_init_data; + +struct bq25890_platform_data { + const struct regulator_init_data *regulator_init_data; +}; + +#endif diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index e218041cc000..cb380c1d9459 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -49,6 +49,7 @@ enum { POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE, /* dynamically adjusted speed */ POWER_SUPPLY_CHARGE_TYPE_CUSTOM, /* use CHARGE_CONTROL_* props */ POWER_SUPPLY_CHARGE_TYPE_LONGLIFE, /* slow speed, longer life */ + POWER_SUPPLY_CHARGE_TYPE_BYPASS, /* bypassing the charger */ }; enum { @@ -348,6 +349,57 @@ struct power_supply_resistance_temp_table { int resistance; /* internal resistance percent */ }; +struct power_supply_vbat_ri_table { + int vbat_uv; /* Battery voltage in microvolt */ + int ri_uohm; /* Internal resistance in microohm */ +}; + +/** + * struct power_supply_maintenance_charge_table - setting for maintenace charging + * @charge_current_max_ua: maintenance charging current that is used to keep + * the charge of the battery full as current is consumed after full charging. + * The corresponding charge_voltage_max_uv is used as a safeguard: when we + * reach this voltage the maintenance charging current is turned off. It is + * turned back on if we fall below this voltage. + * @charge_voltage_max_uv: maintenance charging voltage that is usually a bit + * lower than the constant_charge_voltage_max_uv. We can apply this settings + * charge_current_max_ua until we get back up to this voltage. + * @safety_timer_minutes: maintenance charging safety timer, with an expiry + * time in minutes. We will only use maintenance charging in this setting + * for a certain amount of time, then we will first move to the next + * maintenance charge current and voltage pair in respective array and wait + * for the next safety timer timeout, or, if we reached the last maintencance + * charging setting, disable charging until we reach + * charge_restart_voltage_uv and restart ordinary CC/CV charging from there. + * These timers should be chosen to align with the typical discharge curve + * for the battery. + * + * When the main CC/CV charging is complete the battery can optionally be + * maintenance charged at the voltages from this table: a table of settings is + * traversed using a slightly lower current and voltage than what is used for + * CC/CV charging. The maintenance charging will for safety reasons not go on + * indefinately: we lower the current and voltage with successive maintenance + * settings, then disable charging completely after we reach the last one, + * and after that we do not restart charging until we reach + * charge_restart_voltage_uv (see struct power_supply_battery_info) and restart + * ordinary CC/CV charging from there. + * + * As an example, a Samsung EB425161LA Lithium-Ion battery is CC/CV charged + * at 900mA to 4340mV, then maintenance charged at 600mA and 4150mV for + * 60 hours, then maintenance charged at 600mA and 4100mV for 200 hours. + * After this the charge cycle is restarted waiting for + * charge_restart_voltage_uv. + * + * For most mobile electronics this type of maintenance charging is enough for + * the user to disconnect the device and make use of it before both maintenance + * charging cycles are complete. + */ +struct power_supply_maintenance_charge_table { + int charge_current_max_ua; + int charge_voltage_max_uv; + int charge_safety_timer_minutes; +}; + #define POWER_SUPPLY_OCV_TEMP_MAX 20 /** @@ -393,10 +445,34 @@ struct power_supply_resistance_temp_table { * @constant_charge_voltage_max_uv: voltage in microvolts signifying the end of * the CC (constant current) charging phase and the beginning of the CV * (constant voltage) charging phase. + * @maintenance_charge: an array of maintenance charging settings to be used + * after the main CC/CV charging phase is complete. + * @maintenance_charge_size: the number of maintenance charging settings in + * maintenance_charge. + * @alert_low_temp_charge_current_ua: The charging current to use if the battery + * enters low alert temperature, i.e. if the internal temperature is between + * temp_alert_min and temp_min. No matter the charging phase, this + * and alert_high_temp_charge_voltage_uv will be applied. + * @alert_low_temp_charge_voltage_uv: Same as alert_low_temp_charge_current_ua, + * but for the charging voltage. + * @alert_high_temp_charge_current_ua: The charging current to use if the + * battery enters high alert temperature, i.e. if the internal temperature is + * between temp_alert_max and temp_max. No matter the charging phase, this + * and alert_high_temp_charge_voltage_uv will be applied, usually lowering + * the charging current as an evasive manouver. + * @alert_high_temp_charge_voltage_uv: Same as + * alert_high_temp_charge_current_ua, but for the charging voltage. * @factory_internal_resistance_uohm: the internal resistance of the battery * at fabrication time, expressed in microohms. This resistance will vary * depending on the lifetime and charge of the battery, so this is just a - * nominal ballpark figure. + * nominal ballpark figure. This internal resistance is given for the state + * when the battery is discharging. + * @factory_internal_resistance_charging_uohm: the internal resistance of the + * battery at fabrication time while charging, expressed in microohms. + * The charging process will affect the internal resistance of the battery + * so this value provides a better resistance under these circumstances. + * This resistance will vary depending on the lifetime and charge of the + * battery, so this is just a nominal ballpark figure. * @ocv_temp: array indicating the open circuit voltage (OCV) capacity * temperature indices. This is an array of temperatures in degrees Celsius * indicating which capacity table to use for a certain temperature, since @@ -434,13 +510,38 @@ struct power_supply_resistance_temp_table { * by temperature: highest temperature with lowest resistance first, lowest * temperature with highest resistance last. * @resist_table_size: the number of items in the resist_table. + * @vbat2ri_discharging: this is a table that correlates Battery voltage (VBAT) + * to internal resistance (Ri). The resistance is given in microohm for the + * corresponding voltage in microvolts. The internal resistance is used to + * determine the open circuit voltage so that we can determine the capacity + * of the battery. These voltages to resistance tables apply when the battery + * is discharging. The table must be ordered descending by voltage: highest + * voltage first. + * @vbat2ri_discharging_size: the number of items in the vbat2ri_discharging + * table. + * @vbat2ri_charging: same function as vbat2ri_discharging but for the state + * when the battery is charging. Being under charge changes the battery's + * internal resistance characteristics so a separate table is needed.* + * The table must be ordered descending by voltage: highest voltage first. + * @vbat2ri_charging_size: the number of items in the vbat2ri_charging + * table. + * @bti_resistance_ohm: The Battery Type Indicator (BIT) nominal resistance + * in ohms for this battery, if an identification resistor is mounted + * between a third battery terminal and ground. This scheme is used by a lot + * of mobile device batteries. + * @bti_resistance_tolerance: The tolerance in percent of the BTI resistance, + * for example 10 for +/- 10%, if the bti_resistance is set to 7000 and the + * tolerance is 10% we will detect a proper battery if the BTI resistance + * is between 6300 and 7700 Ohm. * * This is the recommended struct to manage static battery parameters, * populated by power_supply_get_battery_info(). Most platform drivers should * use these for consistency. * * Its field names must correspond to elements in enum power_supply_property. - * The default field value is -EINVAL. + * The default field value is -EINVAL or NULL for pointers. + * + * CC/CV CHARGING: * * The charging parameters here assume a CC/CV charging scheme. This method * is most common with Lithium Ion batteries (other methods are possible) and @@ -525,6 +626,66 @@ struct power_supply_resistance_temp_table { * Overcharging Lithium Ion cells can be DANGEROUS and lead to fire or * explosions. * + * DETERMINING BATTERY CAPACITY: + * + * Several members of the struct deal with trying to determine the remaining + * capacity in the battery, usually as a percentage of charge. In practice + * many chargers uses a so-called fuel gauge or coloumb counter that measure + * how much charge goes into the battery and how much goes out (+/- leak + * consumption). This does not help if we do not know how much capacity the + * battery has to begin with, such as when it is first used or was taken out + * and charged in a separate charger. Therefore many capacity algorithms use + * the open circuit voltage with a look-up table to determine the rough + * capacity of the battery. The open circuit voltage can be conceptualized + * with an ideal voltage source (V) in series with an internal resistance (Ri) + * like this: + * + * +-------> IBAT >----------------+ + * | ^ | + * [ ] Ri | | + * | | VBAT | + * o <---------- | | + * +| ^ | [ ] Rload + * .---. | | | + * | V | | OCV | | + * '---' | | | + * | | | | + * GND +-------------------------------+ + * + * If we disconnect the load (here simplified as a fixed resistance Rload) + * and measure VBAT with a infinite impedance voltage meter we will get + * VBAT = OCV and this assumption is sometimes made even under load, assuming + * Rload is insignificant. However this will be of dubious quality because the + * load is rarely that small and Ri is strongly nonlinear depending on + * temperature and how much capacity is left in the battery due to the + * chemistry involved. + * + * In many practical applications we cannot just disconnect the battery from + * the load, so instead we often try to measure the instantaneous IBAT (the + * current out from the battery), estimate the Ri and thus calculate the + * voltage drop over Ri and compensate like this: + * + * OCV = VBAT - (IBAT * Ri) + * + * The tables vbat2ri_discharging and vbat2ri_charging are used to determine + * (by interpolation) the Ri from the VBAT under load. These curves are highly + * nonlinear and may need many datapoints but can be found in datasheets for + * some batteries. This gives the compensated open circuit voltage (OCV) for + * the battery even under load. Using this method will also compensate for + * temperature changes in the environment: this will also make the internal + * resistance change, and it will affect the VBAT under load, so correlating + * VBAT to Ri takes both remaining capacity and temperature into consideration. + * + * Alternatively a manufacturer can specify how the capacity of the battery + * is dependent on the battery temperature which is the main factor affecting + * Ri. As we know all checmical reactions are faster when it is warm and slower + * when it is cold. You can put in 1500mAh and only get 800mAh out before the + * voltage drops too low for example. This effect is also highly nonlinear and + * the purpose of the table resist_table: this will take a temperature and + * tell us how big percentage of Ri the specified temperature correlates to. + * Usually we have 100% of the factory_internal_resistance_uohm at 25 degrees + * Celsius. + * * The power supply class itself doesn't use this struct as of now. */ @@ -542,7 +703,14 @@ struct power_supply_battery_info { int overvoltage_limit_uv; int constant_charge_current_max_ua; int constant_charge_voltage_max_uv; + struct power_supply_maintenance_charge_table *maintenance_charge; + int maintenance_charge_size; + int alert_low_temp_charge_current_ua; + int alert_low_temp_charge_voltage_uv; + int alert_high_temp_charge_current_ua; + int alert_high_temp_charge_voltage_uv; int factory_internal_resistance_uohm; + int factory_internal_resistance_charging_uohm; int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX]; int temp_ambient_alert_min; int temp_ambient_alert_max; @@ -554,6 +722,12 @@ struct power_supply_battery_info { int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX]; struct power_supply_resistance_temp_table *resist_table; int resist_table_size; + struct power_supply_vbat_ri_table *vbat2ri_discharging; + int vbat2ri_discharging_size; + struct power_supply_vbat_ri_table *vbat2ri_charging; + int vbat2ri_charging_size; + int bti_resistance_ohm; + int bti_resistance_tolerance; }; extern struct atomic_notifier_head power_supply_notifier; @@ -595,12 +769,43 @@ extern int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info, extern int power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table, int table_len, int temp); +extern int power_supply_vbat2ri(struct power_supply_battery_info *info, + int vbat_uv, bool charging); +extern struct power_supply_maintenance_charge_table * +power_supply_get_maintenance_charging_setting(struct power_supply_battery_info *info, int index); +extern bool power_supply_battery_bti_in_range(struct power_supply_battery_info *info, + int resistance); extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); -extern int power_supply_set_input_current_limit_from_supplier( - struct power_supply *psy); +int power_supply_get_property_from_supplier(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val); extern int power_supply_set_battery_charged(struct power_supply *psy); +static inline bool +power_supply_supports_maintenance_charging(struct power_supply_battery_info *info) +{ + struct power_supply_maintenance_charge_table *mt; + + mt = power_supply_get_maintenance_charging_setting(info, 0); + + return (mt != NULL); +} + +static inline bool +power_supply_supports_vbat2ri(struct power_supply_battery_info *info) +{ + return ((info->vbat2ri_discharging != NULL) && + info->vbat2ri_discharging_size > 0); +} + +static inline bool +power_supply_supports_temp2ri(struct power_supply_battery_info *info) +{ + return ((info->resist_table != NULL) && + info->resist_table_size > 0); +} + #ifdef CONFIG_POWER_SUPPLY extern int power_supply_is_system_supplied(void); #else |