diff options
-rw-r--r-- | Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt | 57 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml | 126 | ||||
-rw-r--r-- | drivers/base/power/domain.c | 64 | ||||
-rw-r--r-- | drivers/base/power/domain_governor.c | 1 | ||||
-rw-r--r-- | drivers/devfreq/Kconfig | 1 | ||||
-rw-r--r-- | drivers/devfreq/devfreq.c | 1 | ||||
-rw-r--r-- | drivers/devfreq/governor_passive.c | 3 | ||||
-rw-r--r-- | drivers/devfreq/governor_userspace.c | 10 | ||||
-rw-r--r-- | drivers/devfreq/imx-bus.c | 14 | ||||
-rw-r--r-- | drivers/devfreq/tegra30-devfreq.c | 1 | ||||
-rw-r--r-- | include/linux/pm_domain.h | 1 |
11 files changed, 186 insertions, 93 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt deleted file mode 100644 index 897eedfa2bc8..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ /dev/null @@ -1,57 +0,0 @@ -NVIDIA Tegra Activity Monitor - -The activity monitor block collects statistics about the behaviour of other -components in the system. This information can be used to derive the rate at -which the external memory needs to be clocked in order to serve all requests -from the monitored clients. - -Required properties: -- compatible: should be "nvidia,tegra<chip>-actmon" -- reg: offset and length of the register set for the device -- interrupts: standard interrupt property -- clocks: Must contain a phandle and clock specifier pair for each entry in -clock-names. See ../../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - actmon - - emc -- resets: Must contain an entry for each entry in reset-names. See -../../reset/reset.txt for details. -- reset-names: Must include the following entries: - - actmon -- operating-points-v2: See ../bindings/opp/opp.txt for details. -- interconnects: Should contain entries for memory clients sitting on - MC->EMC memory interconnect path. -- interconnect-names: Should include name of the interconnect path for each - interconnect entry. Consult TRM documentation for - information about available memory clients, see MEMORY - CONTROLLER section. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: bitfield indicating SoC speedo ID mask -- opp-peak-kBps: peak bandwidth of the memory channel - -Example: - dfs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@12750000 { - opp-hz = /bits/ 64 <12750000>; - opp-supported-hw = <0x000F>; - opp-peak-kBps = <51000>; - }; - ... - }; - - actmon@6000c800 { - compatible = "nvidia,tegra124-actmon"; - reg = <0x0 0x6000c800 0x0 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_ACTMON>, - <&tegra_car TEGRA124_CLK_EMC>; - clock-names = "actmon", "emc"; - resets = <&tegra_car 119>; - reset-names = "actmon"; - operating-points-v2 = <&dfs_opp_table>; - interconnects = <&mc TEGRA124_MC_MPCORER &emc>; - interconnect-names = "cpu"; - }; diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml new file mode 100644 index 000000000000..e3379d106728 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 Activity Monitor + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The activity monitor block collects statistics about the behaviour of other + components in the system. This information can be used to derive the rate at + which the external memory needs to be clocked in order to serve all requests + from the monitored clients. + +properties: + compatible: + enum: + - nvidia,tegra30-actmon + - nvidia,tegra114-actmon + - nvidia,tegra124-actmon + - nvidia,tegra210-actmon + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: actmon + - const: emc + + resets: + maxItems: 1 + + reset-names: + items: + - const: actmon + + interrupts: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 12 + + interconnect-names: + minItems: 1 + maxItems: 12 + description: + Should include name of the interconnect path for each interconnect + entry. Consult TRM documentation for information about available + memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC speedo ID mask. + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interconnects + - interconnect-names + - operating-points-v2 + - "#cooling-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra30-mc.h> + + mc: memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&clk 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + + emc: external-memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + }; + + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <0 45 4>; + clocks = <&clk 119>, <&clk 57>; + clock-names = "actmon", "emc"; + resets = <&rst 119>; + reset-names = "actmon"; + operating-points-v2 = <&dvfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index b6a782c31613..ab0b740cc0f1 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -379,6 +379,44 @@ err: return ret; } +static int genpd_set_performance_state(struct device *dev, unsigned int state) +{ + struct generic_pm_domain *genpd = dev_to_genpd(dev); + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + unsigned int prev_state; + int ret; + + prev_state = gpd_data->performance_state; + if (prev_state == state) + return 0; + + gpd_data->performance_state = state; + state = _genpd_reeval_performance_state(genpd, state); + + ret = _genpd_set_performance_state(genpd, state, 0); + if (ret) + gpd_data->performance_state = prev_state; + + return ret; +} + +static int genpd_drop_performance_state(struct device *dev) +{ + unsigned int prev_state = dev_gpd_data(dev)->performance_state; + + if (!genpd_set_performance_state(dev, 0)) + return prev_state; + + return 0; +} + +static void genpd_restore_performance_state(struct device *dev, + unsigned int state) +{ + if (state) + genpd_set_performance_state(dev, state); +} + /** * dev_pm_genpd_set_performance_state- Set performance state of device's power * domain. @@ -397,8 +435,6 @@ err: int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) { struct generic_pm_domain *genpd; - struct generic_pm_domain_data *gpd_data; - unsigned int prev; int ret; genpd = dev_to_genpd_safe(dev); @@ -410,16 +446,7 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) return -EINVAL; genpd_lock(genpd); - - gpd_data = to_gpd_data(dev->power.subsys_data->domain_data); - prev = gpd_data->performance_state; - gpd_data->performance_state = state; - - state = _genpd_reeval_performance_state(genpd, state); - ret = _genpd_set_performance_state(genpd, state, 0); - if (ret) - gpd_data->performance_state = prev; - + ret = genpd_set_performance_state(dev, state); genpd_unlock(genpd); return ret; @@ -572,6 +599,7 @@ static void genpd_queue_power_off_work(struct generic_pm_domain *genpd) * RPM status of the releated device is in an intermediate state, not yet turned * into RPM_SUSPENDED. This means genpd_power_off() must allow one device to not * be RPM_SUSPENDED, while it tries to power off the PM domain. + * @depth: nesting count for lockdep. * * If all of the @genpd's devices have been suspended and all of its subdomains * have been powered down, remove power from @genpd. @@ -832,7 +860,8 @@ static int genpd_runtime_suspend(struct device *dev) { struct generic_pm_domain *genpd; bool (*suspend_ok)(struct device *__dev); - struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + struct gpd_timing_data *td = &gpd_data->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; @@ -889,6 +918,7 @@ static int genpd_runtime_suspend(struct device *dev) return 0; genpd_lock(genpd); + gpd_data->rpm_pstate = genpd_drop_performance_state(dev); genpd_power_off(genpd, true, 0); genpd_unlock(genpd); @@ -906,7 +936,8 @@ static int genpd_runtime_suspend(struct device *dev) static int genpd_runtime_resume(struct device *dev) { struct generic_pm_domain *genpd; - struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + struct gpd_timing_data *td = &gpd_data->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; @@ -930,6 +961,8 @@ static int genpd_runtime_resume(struct device *dev) genpd_lock(genpd); ret = genpd_power_on(genpd, 0); + if (!ret) + genpd_restore_performance_state(dev, gpd_data->rpm_pstate); genpd_unlock(genpd); if (ret) @@ -968,6 +1001,7 @@ err_stop: err_poweroff: if (!pm_runtime_is_irq_safe(dev) || genpd_is_irq_safe(genpd)) { genpd_lock(genpd); + gpd_data->rpm_pstate = genpd_drop_performance_state(dev); genpd_power_off(genpd, true, 0); genpd_unlock(genpd); } @@ -2505,7 +2539,7 @@ EXPORT_SYMBOL_GPL(of_genpd_remove_subdomain); /** * of_genpd_remove_last - Remove the last PM domain registered for a provider - * @provider: Pointer to device structure associated with provider + * @np: Pointer to device node associated with provider * * Find the last PM domain that was added by a particular provider and * remove this PM domain from the list of PM domains. The provider is diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index c6c218758f0b..cd08c5885190 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -252,6 +252,7 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, /** * _default_power_down_ok - Default generic PM domain power off governor routine. * @pd: PM domain to check. + * @now: current ktime. * * This routine must be executed under the PM domain's lock. */ diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 20373a893b44..e87d01c0b76a 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -103,7 +103,6 @@ config ARM_IMX8M_DDRC_DEVFREQ tristate "i.MX8M DDRC DEVFREQ Driver" depends on (ARCH_MXC && HAVE_ARM_SMCCC) || \ (COMPILE_TEST && HAVE_ARM_SMCCC) - select DEVFREQ_GOV_SIMPLE_ONDEMAND select DEVFREQ_GOV_USERSPACE help This adds the DEVFREQ driver for the i.MX8M DDR Controller. It allows diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index fe08c46642f7..28f3e0ba6cdd 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -823,6 +823,7 @@ struct devfreq *devfreq_add_device(struct device *dev, if (devfreq->profile->timer < 0 || devfreq->profile->timer >= DEVFREQ_TIMER_NUM) { mutex_unlock(&devfreq->lock); + err = -EINVAL; goto err_dev; } diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c index b094132bd20b..fc09324a03e0 100644 --- a/drivers/devfreq/governor_passive.c +++ b/drivers/devfreq/governor_passive.c @@ -65,7 +65,7 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, dev_pm_opp_put(p_opp); if (IS_ERR(opp)) - return PTR_ERR(opp); + goto no_required_opp; *freq = dev_pm_opp_get_freq(opp); dev_pm_opp_put(opp); @@ -73,6 +73,7 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, return 0; } +no_required_opp: /* * Get the OPP table's index of decided frequency by governor * of parent device. diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c index 0fd6c4851071..ab9db7adb3ad 100644 --- a/drivers/devfreq/governor_userspace.c +++ b/drivers/devfreq/governor_userspace.c @@ -31,8 +31,8 @@ static int devfreq_userspace_func(struct devfreq *df, unsigned long *freq) return 0; } -static ssize_t store_freq(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_freq_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct devfreq *devfreq = to_devfreq(dev); struct userspace_data *data; @@ -52,8 +52,8 @@ static ssize_t store_freq(struct device *dev, struct device_attribute *attr, return err; } -static ssize_t show_freq(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t set_freq_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct devfreq *devfreq = to_devfreq(dev); struct userspace_data *data; @@ -70,7 +70,7 @@ static ssize_t show_freq(struct device *dev, struct device_attribute *attr, return err; } -static DEVICE_ATTR(set_freq, 0644, show_freq, store_freq); +static DEVICE_ATTR_RW(set_freq); static struct attribute *dev_entries[] = { &dev_attr_set_freq.attr, NULL, diff --git a/drivers/devfreq/imx-bus.c b/drivers/devfreq/imx-bus.c index 3fc3fd77492d..f3f6e25053ed 100644 --- a/drivers/devfreq/imx-bus.c +++ b/drivers/devfreq/imx-bus.c @@ -45,18 +45,6 @@ static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq) return 0; } -static int imx_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct imx_bus *priv = dev_get_drvdata(dev); - - stat->busy_time = 0; - stat->total_time = 0; - stat->current_frequency = clk_get_rate(priv->clk); - - return 0; -} - static void imx_bus_exit(struct device *dev) { struct imx_bus *priv = dev_get_drvdata(dev); @@ -129,9 +117,7 @@ static int imx_bus_probe(struct platform_device *pdev) return ret; } - priv->profile.polling_ms = 1000; priv->profile.target = imx_bus_target; - priv->profile.get_dev_status = imx_bus_get_dev_status; priv->profile.exit = imx_bus_exit; priv->profile.get_cur_freq = imx_bus_get_cur_freq; priv->profile.initial_freq = clk_get_rate(priv->clk); diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c index ce83f883ca65..10661eb2aed8 100644 --- a/drivers/devfreq/tegra30-devfreq.c +++ b/drivers/devfreq/tegra30-devfreq.c @@ -688,6 +688,7 @@ static struct devfreq_dev_profile tegra_devfreq_profile = { .polling_ms = ACTMON_SAMPLING_PERIOD, .target = tegra_devfreq_target, .get_dev_status = tegra_devfreq_get_dev_status, + .is_cooling_device = true, }; static int tegra_governor_get_target(struct devfreq *devfreq, diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index dfcfbcecc34b..21a0577305ef 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -198,6 +198,7 @@ struct generic_pm_domain_data { struct notifier_block *power_nb; int cpu; unsigned int performance_state; + unsigned int rpm_pstate; ktime_t next_wakeup; void *data; }; |