summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi10
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts1
-rw-r--r--arch/arm/boot/dts/bcm958522er.dts4
-rw-r--r--arch/arm/boot/dts/bcm958525er.dts4
-rw-r--r--arch/arm/boot/dts/bcm958525xmc.dts4
-rw-r--r--arch/arm/boot/dts/bcm958622hr.dts4
-rw-r--r--arch/arm/boot/dts/bcm958623hr.dts4
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts4
-rw-r--r--arch/arm/boot/dts/bcm958625k.dts4
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi13
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi13
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi146
-rw-r--r--arch/arm/mach-bcm/Kconfig1
-rw-r--r--arch/arm/mach-imx/pm-imx5.c6
-rw-r--r--arch/arm/mach-imx/pm-imx6.c10
-rw-r--r--arch/arm/mach-sti/board-dt.c9
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-evk.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts4
-rw-r--r--drivers/firmware/raspberrypi.c5
-rw-r--r--drivers/soc/imx/soc-imx8m.c10
22 files changed, 152 insertions, 118 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 28bd4715ebd5..496fd4eafb68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12695,13 +12695,13 @@ F: arch/mips/boot/dts/ralink/omega2p.dts
OP-TEE DRIVER
M: Jens Wiklander <jens.wiklander@linaro.org>
-L: tee-dev@lists.linaro.org
+L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/tee/optee/
OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
M: Sumit Garg <sumit.garg@linaro.org>
-L: tee-dev@lists.linaro.org
+L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/char/hw_random/optee-rng.c
@@ -16774,7 +16774,7 @@ F: include/media/i2c/tw9910.h
TEE SUBSYSTEM
M: Jens Wiklander <jens.wiklander@linaro.org>
-L: tee-dev@lists.linaro.org
+L: op-tee@lists.trustedfirmware.org
S: Maintained
F: Documentation/tee.txt
F: drivers/tee/
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index da6d70f09ef1..3175266ede64 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -200,7 +200,7 @@
status = "disabled";
};
- dma@20000 {
+ dma: dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,6 +215,8 @@
clocks = <&iprocslow>;
clock-names = "apb_pclk";
#dma-cells = <1>;
+ dma-coherent;
+ status = "disabled";
};
sdio: sdhci@21000 {
@@ -257,10 +259,10 @@
status = "disabled";
};
- mailbox: mailbox@25000 {
+ mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
- reg = <0x25000 0x445>;
- interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x25c00 0x400>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 334325390aed..29bbecd36f65 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -17,6 +17,7 @@
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb8a08f..7be4c4e628e0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index c339771bb22e..e58ed7e95346 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8288de..716da62f5788 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -58,6 +58,10 @@
/* XHCI support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 96a021cebd97..a49c2fd21f4a 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21d471e..dd6dff6452b8 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 536fb24f38bb..a71371b4065e 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -69,6 +69,10 @@
status = "okay";
};
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12d83c2..7b84b54436ed 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -48,6 +48,10 @@
};
};
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index f05e91841202..53a25fba34f6 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -232,13 +232,6 @@
status = "okay";
};
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
@@ -409,10 +402,4 @@
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>;
};
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index a17af4d9bfdf..61ba21a605a8 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -57,6 +57,13 @@
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_out>;
@@ -106,4 +113,10 @@
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
};
};
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- oscclk0 {
- /* MCC static memory clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- freq-range = <25000000 60000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk0";
- };
-
- v2m_oscclk1: oscclk1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 65000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- v2m_oscclk2: oscclk2 {
- /* IO FPGA peripheral clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 2>;
- freq-range = <24000000 24000000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk2";
- };
-
- volt-vio {
- /* Logic level voltage */
- compatible = "arm,vexpress-volt";
- arm,vexpress-sysreg,func = <2 0>;
- regulator-name = "VIO";
- regulator-always-on;
- label = "VIO";
- };
-
- temp-mcc {
- /* MCC internal operating temperature */
- compatible = "arm,vexpress-temp";
- arm,vexpress-sysreg,func = <4 0>;
- label = "MCC";
- };
-
- reset {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
-
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@@ -435,6 +362,79 @@
};
};
};
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ oscclk0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: oscclk1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: oscclk2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt-vio {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp-mcc {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
};
};
};
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 6aa938b949db..1df0ee01ee02 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -53,6 +53,7 @@ config ARCH_BCM_NSP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
+ select ARM_TIMER_SP804
select THERMAL
select THERMAL_OF
help
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index f057df813f83..e9962b48e30c 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
- goto put_node;
+ goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, size);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
- goto put_node;
+ goto put_device;
}
phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
if (virt_out)
*virt_out = virt;
+put_device:
+ put_device(&pdev->dev);
put_node:
of_node_put(node);
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index dd34dff13762..40c74b4c4d73 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
- goto put_node;
+ goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
- goto put_node;
+ goto put_device;
}
ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
if (ret) {
pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
- goto put_node;
+ goto put_device;
}
ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
@@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
&imx6_suspend,
MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
- goto put_node;
+ goto put_device;
pl310_cache_map_failed:
iounmap(pm_info->gpc_base.vbase);
@@ -580,6 +580,8 @@ iomuxc_map_failed:
iounmap(pm_info->src_base.vbase);
src_map_failed:
iounmap(pm_info->mmdc_base.vbase);
+put_device:
+ put_device(&pdev->dev);
put_node:
of_node_put(node);
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index dcb98937fcf5..ffecbf29646f 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = {
NULL
};
-static void sti_l2_write_sec(unsigned long val, unsigned reg)
-{
- /*
- * We can't write to secure registers as we are in non-secure
- * mode, until we have some SMI service available.
- */
-}
-
DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
.dt_compat = stih41x_dt_match,
.l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE |
@@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
L2C_AUX_CTRL_WAY_SIZE(4),
.l2c_aux_mask = 0xc0000fff,
.smp = smp_ops(sti_smp_ops),
- .l2c_write_sec = sti_l2_write_sec,
MACHINE_END
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index fb0137a8611c..94911b1707ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -136,7 +136,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <3000000>;
+ regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@@ -144,7 +144,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index e5ec8322796d..0f1d7f8aeac4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -208,7 +208,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <3000000>;
+ regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@@ -216,7 +216,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index d07e0e6a00cc..a1e5483dbbbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -113,7 +113,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <3000000>;
+ regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@@ -121,7 +121,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index ef8098856a47..625c8fdceabf 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -181,6 +181,7 @@ EXPORT_SYMBOL_GPL(rpi_firmware_property);
static void
rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
{
+ time64_t date_and_time;
u32 packet;
int ret = rpi_firmware_property(fw,
RPI_FIRMWARE_GET_FIRMWARE_REVISION,
@@ -189,7 +190,9 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
if (ret)
return;
- dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &packet);
+ /* This is not compatible with y2038 */
+ date_and_time = packet;
+ dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &date_and_time);
}
static void
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index 7b0759adb47d..cc57a384d74d 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -22,6 +22,8 @@
#define OCOTP_UID_LOW 0x410
#define OCOTP_UID_HIGH 0x420
+#define IMX8MP_OCOTP_UID_OFFSET 0x10
+
/* Same as ANADIG_DIGPROG_IMX7D */
#define ANADIG_DIGPROG_IMX8MM 0x800
@@ -87,6 +89,8 @@ static void __init imx8mm_soc_uid(void)
{
void __iomem *ocotp_base;
struct device_node *np;
+ u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
+ IMX8MP_OCOTP_UID_OFFSET : 0;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
if (!np)
@@ -95,9 +99,9 @@ static void __init imx8mm_soc_uid(void)
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
- soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+ soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
soc_uid <<= 32;
- soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+ soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
iounmap(ocotp_base);
of_node_put(np);
@@ -146,7 +150,7 @@ static const struct imx8_soc_data imx8mp_soc_data = {
.soc_revision = imx8mm_soc_revision,
};
-static const struct of_device_id imx8_soc_match[] = {
+static __maybe_unused const struct of_device_id imx8_soc_match[] = {
{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },