diff options
| -rw-r--r-- | Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064.dtsi | 3 | ||||
| -rw-r--r-- | drivers/ata/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci_platform.c | 3 | ||||
| -rw-r--r-- | drivers/ata/ahci_seattle.c | 210 | ||||
| -rw-r--r-- | drivers/ata/libahci.c | 1 |
7 files changed, 229 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 30df832a6f2f..87adfb227ca9 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -32,6 +32,10 @@ Optional properties: - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" +- ports-implemented : Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with + some embedded SOC's. Required properties when using sub-nodes: - #address-cells : number of cells to encode an address diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 65d0e8d98259..04f541bffbdd 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -666,7 +666,7 @@ }; sata0: sata@29000000 { - compatible = "generic-ahci"; + compatible = "qcom,apq8064-ahci", "generic-ahci"; status = "disabled"; reg = <0x29000000 0x180>; interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; @@ -688,6 +688,7 @@ phys = <&sata_phy0>; phy-names = "sata-phy"; + ports-implemented = <0x1>; }; /* Temporary fixed regulator */ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5083f85efea7..cfa936a32513 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -202,6 +202,14 @@ config SATA_FSL If unsure, say N. +config SATA_AHCI_SEATTLE + tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" + depends on ARCH_SEATTLE + help + This option enables support for AMD Seattle SATA host controller. + + If unsure, say N + config SATA_INIC162X tristate "Initio 162x SATA support (Very Experimental)" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 18579521464e..0b2afb7e5f35 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_ATA) += libata.o # non-SFF interface obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o +obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 40442332bfa7..62a04c8fb5c9 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -51,6 +51,9 @@ static int ahci_probe(struct platform_device *pdev) if (rc) return rc; + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->force_port_map); + if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c new file mode 100644 index 000000000000..6e702ab57220 --- /dev/null +++ b/drivers/ata/ahci_seattle.c @@ -0,0 +1,210 @@ +/* + * AMD Seattle AHCI SATA driver + * + * Copyright (c) 2015, Advanced Micro Devices + * Author: Brijesh Singh <brijesh.singh@amd.com> + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/device.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/ahci_platform.h> +#include <linux/acpi.h> +#include <linux/pci_ids.h> +#include "ahci.h" + +/* SGPIO Control Register definition + * + * Bit Type Description + * 31 RW OD7.2 (activity) + * 30 RW OD7.1 (locate) + * 29 RW OD7.0 (fault) + * 28...8 RW OD6.2...OD0.0 (3bits per port, 1 bit per LED) + * 7 RO SGPIO feature flag + * 6:4 RO Reserved + * 3:0 RO Number of ports (0 means no port supported) + */ +#define ACTIVITY_BIT_POS(x) (8 + (3 * x)) +#define LOCATE_BIT_POS(x) (ACTIVITY_BIT_POS(x) + 1) +#define FAULT_BIT_POS(x) (LOCATE_BIT_POS(x) + 1) + +#define ACTIVITY_MASK 0x00010000 +#define LOCATE_MASK 0x00080000 +#define FAULT_MASK 0x00400000 + +#define DRV_NAME "ahci-seattle" + +static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size); + +struct seattle_plat_data { + void __iomem *sgpio_ctrl; +}; + +static struct ata_port_operations ahci_port_ops = { + .inherits = &ahci_ops, +}; + +static const struct ata_port_info ahci_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_port_ops, +}; + +static struct ata_port_operations ahci_seattle_ops = { + .inherits = &ahci_ops, + .transmit_led_message = seattle_transmit_led_message, +}; + +static const struct ata_port_info ahci_port_seattle_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY, + .link_flags = ATA_LFLAG_SW_ACTIVITY, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_seattle_ops, +}; + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + struct seattle_plat_data *plat_data = hpriv->plat_data; + unsigned long flags; + int pmp; + struct ahci_em_priv *emp; + u32 val; + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp >= EM_MAX_SLOTS) + return -EINVAL; + emp = &pp->em_priv[pmp]; + + val = ioread32(plat_data->sgpio_ctrl); + if (state & ACTIVITY_MASK) + val |= 1 << ACTIVITY_BIT_POS((ap->port_no)); + else + val &= ~(1 << ACTIVITY_BIT_POS((ap->port_no))); + + if (state & LOCATE_MASK) + val |= 1 << LOCATE_BIT_POS((ap->port_no)); + else + val &= ~(1 << LOCATE_BIT_POS((ap->port_no))); + + if (state & FAULT_MASK) + val |= 1 << FAULT_BIT_POS((ap->port_no)); + else + val &= ~(1 << FAULT_BIT_POS((ap->port_no))); + + iowrite32(val, plat_data->sgpio_ctrl); + + spin_lock_irqsave(ap->lock, flags); + + /* save off new led state for port/slot */ + emp->led_state = state; + + spin_unlock_irqrestore(ap->lock, flags); + + return size; +} + +static const struct ata_port_info *ahci_seattle_get_port_info( + struct platform_device *pdev, struct ahci_host_priv *hpriv) +{ + struct device *dev = &pdev->dev; + struct seattle_plat_data *plat_data; + u32 val; + + plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL); + if (IS_ERR(plat_data)) + return &ahci_port_info; + + plat_data->sgpio_ctrl = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 1)); + if (IS_ERR(plat_data->sgpio_ctrl)) + return &ahci_port_info; + + val = ioread32(plat_data->sgpio_ctrl); + + if (!(val & 0xf)) + return &ahci_port_info; + + hpriv->em_loc = 0; + hpriv->em_buf_sz = 4; + hpriv->em_msg_type = EM_MSG_TYPE_LED; + hpriv->plat_data = plat_data; + + dev_info(dev, "SGPIO LED control is enabled.\n"); + return &ahci_port_seattle_info; +} + +static int ahci_seattle_probe(struct platform_device *pdev) +{ + int rc; + struct ahci_host_priv *hpriv; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_platform_init_host(pdev, hpriv, + ahci_seattle_get_port_info(pdev, hpriv), + &ahci_platform_sht); + if (rc) + goto disable_resources; + + return 0; +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, + ahci_platform_resume); + +static const struct acpi_device_id ahci_acpi_match[] = { + { "AMDI0600", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, ahci_acpi_match); + +static struct platform_driver ahci_seattle_driver = { + .probe = ahci_seattle_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .acpi_match_table = ahci_acpi_match, + .pm = &ahci_pm_ops, + }, +}; +module_platform_driver(ahci_seattle_driver); + +MODULE_DESCRIPTION("Seattle AHCI SATA platform driver"); +MODULE_AUTHOR("Brijesh Singh <brijesh.singh@amd.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 3982054060b8..a5d7c1c2a05e 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -507,6 +507,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", port_map, hpriv->force_port_map); port_map = hpriv->force_port_map; + hpriv->saved_port_map = port_map; } if (hpriv->mask_port_map) { |