diff options
| -rw-r--r-- | arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts new file mode 100644 index 000000000000..aa5caaa31104 --- /dev/null +++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Stefan Roese <sr@denx.de> + */ + +/dts-v1/; + +/include/ "mt7628a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc", + "ralink,mt7628a-soc"; + model = "GARDENA smart Gateway (MT7688)"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ + + user_btn1 { + label = "USER_BTN1"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code =<KEY_PROG1> ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */ + <&pinmux_pwm1_gpio>, /* GPIO19 */ + <&pinmux_sdmode_gpio>, /* GPIO22..29 */ + <&pinmux_p0led_an_gpio>; /* GPIO43 */ + /* + * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as + * well for GPIO3. But this is already claimed for uart1 + * (see below). So we can't include it in this LED node. + */ + + power_blue { + label = "smartgw:power:blue"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + ethernet_link { + label = "smartgw:eth:link"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + + ethernet_activity { + label = "smartgw:eth:act"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&i2c { + status = "okay"; +}; + +&spi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "uboot_env0"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + label = "uboot_env1"; + reg = <0xb0000 0x10000>; + }; + + factory: partition@c0000 { + label = "factory"; + reg = <0xc0000 0x10000>; + read-only; + }; + }; + }; + + nand_flash@1 { + compatible = "spi-nand"; + linux,mtd-name = "gd5f"; + reg = <1>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */ + + rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; +}; + +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */ + <&pinmux_p3led_an_gpio>; /* GPIO40 */ + + rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; + +&watchdog { + status = "okay"; +}; |