diff options
32 files changed, 272 insertions, 80 deletions
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1467750e3377..e8c6c600a5b6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -953,6 +953,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 28e7e2060c33..a98ac1bd8f65 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -65,6 +65,8 @@ }; &sdhci2 { + broken-cd; + bus-width = <8>; non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 35253c947a7c..e2f61f27944e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -83,7 +83,8 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; status = "disabled"; }; @@ -348,36 +349,6 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; - - gpio4: gpio@5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio@c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control@ea0000 { @@ -466,6 +437,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c@7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -516,6 +502,21 @@ status = "disabled"; }; + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller@d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 10b725c7bfc0..ad4118f7e1a6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -499,23 +499,23 @@ }; partition@5 { label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00010000>; + reg = <0x00140000 0x00080000>; }; partition@6 { label = "QSPI.u-boot-env"; - reg = <0x00150000 0x00010000>; + reg = <0x001c0000 0x00010000>; }; partition@7 { label = "QSPI.u-boot-env.backup1"; - reg = <0x00160000 0x0010000>; + reg = <0x001d0000 0x0010000>; }; partition@8 { label = "QSPI.kernel"; - reg = <0x00170000 0x0800000>; + reg = <0x001e0000 0x0800000>; }; partition@9 { label = "QSPI.file-system"; - reg = <0x00970000 0x01690000>; + reg = <0x009e0000 0x01620000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0a229fcd7acf..d75c89d7666a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -736,7 +736,7 @@ dp_phy: video-phy@10040720 { compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040720 4>; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index aa7a7d727a7e..db2c1c4cd900 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -372,3 +372,7 @@ &usbdrd_dwc3_1 { dr_mode = "host"; }; + +&cci { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 517e50f6760b..6d38f8bfd0e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -120,7 +120,7 @@ }; }; - cci@10d20000 { + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; #size-cells = <1>; @@ -503,8 +503,8 @@ }; dp_phy: video-phy@10040728 { - compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040728 4>; + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..d238676a9107 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -162,7 +162,7 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; + clocks = <&clks 78>, <&clks 78>; clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7f1cee..2109d0763c1b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -335,8 +335,8 @@ vpu: vpu@02040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; - interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 657da14cb4b5..c70bb27ac65a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -142,6 +142,7 @@ scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; }; clockgen: clocking@1ee1000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 53f3ca064140..b550c41b46f1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -700,11 +700,9 @@ }; }; + /* Ethernet is on some early development boards and qemu */ ethernet@gpmc { compatible = "smsc,lan91c94"; - - status = "disabled"; - interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 3e067dd65d0c..6194d673e80b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -155,6 +155,15 @@ }; &pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + backlight { bl_en: bl-en { rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -173,6 +182,27 @@ }; }; + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on EVB board so bump up to 8ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 49c10d33df30..77e03655aca3 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -176,7 +176,7 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", - "MICBIAS", "IN1L", + "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 1b0f30c2c4a5..b94995d1889f 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1008,7 +1008,7 @@ pit: timer@fc068630 { compatible = "atmel,at91sam9260-pit"; - reg = <0xfc068630 0xf>; + reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&h32ck>; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index a8c00ee7522a..3d0b8755caee 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -25,11 +25,11 @@ stmpe2401_1 { stmpe2401_1_nhk_mode: stmpe2401_1_nhk { nhk_cfg1 { - ste,pins = "GPIO76_B20"; // IRQ line + pins = "GPIO76_B20"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO77_B8"; // reset line + pins = "GPIO77_B8"; // reset line ste,output = <1>; }; }; @@ -37,11 +37,11 @@ stmpe2401_2 { stmpe2401_2_nhk_mode: stmpe2401_2_nhk { nhk_cfg1 { - ste,pins = "GPIO78_A8"; // IRQ line + pins = "GPIO78_A8"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO79_C9"; // reset line + pins = "GPIO79_C9"; // reset line ste,output = <1>; }; }; diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 5ef14de00a29..3d0c5d65c741 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y -# CONFIG_HWMON is not set +CONFIG_HWMON=y +CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y CONFIG_EXYNOS_THERMAL=y CONFIG_EXYNOS_THERMAL_CORE=y @@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y +CONFIG_DRM=y +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PTN3460=y +CONFIG_DRM_PS8622=y +CONFIG_DRM_EXYNOS=y +CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS_DP=y +CONFIG_DRM_PANEL=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c2c3a852af9f..667d9d52aa01 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_GENERIC_CPUFREQ_CPU0=y +CONFIG_CPUFREQ_DT=y # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 8fb9ef5333f1..97f7367d32b8 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -17,6 +17,7 @@ #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/clk-provider.h> +#include <linux/phy.h> #include <asm/setup.h> #include <asm/irq.h> @@ -26,8 +27,25 @@ #include "generic.h" +static int ksz8081_phy_fixup(struct phy_device *phy) +{ + int value; + + value = phy_read(phy, 0x16); + value &= ~0x20; + phy_write(phy, 0x16, value); + + return 0; +} + static void __init sama5_dt_device_init(void) { + if (of_machine_is_compatible("atmel,sama5d4ek") && + IS_ENABLED(CONFIG_PHYLIB)) { + phy_register_fixup_for_id("fc028000.etherne:00", + ksz8081_phy_fixup); + } + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5951660d1bd2..2daef619d053 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; - video_div_table[2].div = 1; + video_div_table[3].div = 1; } clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 17354a11356f..5a3e5a159e70 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 608079a1aba6..b61c049f92d6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -77,6 +77,24 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 +/* Some boards need board name for legacy userspace in /proc/cpuinfo */ +static const char *const n900_boards_compat[] __initconst = { + "nokia,omap3-n900", + NULL, +}; + +DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_sync32k_timer_init, + .dt_compat = n900_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +/* Generic omap3 boards, most boards can use these */ static const char *const omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 377eea849e7b..db57741c9c8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -249,6 +249,7 @@ extern void omap4_cpu_die(unsigned int cpu); extern struct smp_operations omap4_smp_ops; extern void omap5_secondary_startup(void); +extern void omap5_secondary_hyp_startup(void); #endif #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a3c013345c45..a80ac2d70bb1 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -286,6 +286,10 @@ #define OMAP5XXX_CONTROL_STATUS 0x134 #define OMAP5_DEVICETYPE_MASK (0x7 << 6) +/* DRA7XX CONTROL CORE BOOTSTRAP */ +#define DRA7_CTRL_CORE_BOOTSTRAP 0x6c4 +#define DRA7_SPEEDSELECT_MASK (0x3 << 8) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4993d4bfe9b2..6d1dffca6c7b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -22,6 +22,7 @@ /* Physical address needed since MMU not enabled yet on secondary core */ #define AUX_CORE_BOOT0_PA 0x48281800 +#define API_HYP_ENTRY 0x102 /* * OMAP5 specific entry point for secondary CPU to jump from ROM @@ -41,6 +42,26 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 b secondary_startup ENDPROC(omap5_secondary_startup) /* + * Same as omap5_secondary_startup except we call into the ROM to + * enable HYP mode first. This is called instead of + * omap5_secondary_startup if the primary CPU was put into HYP mode by + * the boot loader. + */ +ENTRY(omap5_secondary_hyp_startup) +wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 + ldr r0, [r2] + mov r0, r0, lsr #5 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne wait_2 + ldr r12, =API_HYP_ENTRY + adr r0, hyp_boot + smc #0 +hyp_boot: + b secondary_startup +ENDPROC(omap5_secondary_hyp_startup) +/* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 256e84ef0f67..5305ec7341ec 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -22,6 +22,7 @@ #include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> +#include <asm/virt.h> #include "omap-secure.h" #include "omap-wakeupgen.h" @@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else - writel_relaxed(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); + /* + * If the boot CPU is in HYP mode then start secondary + * CPU in HYP mode as well. + */ + if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) + writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup), + base + OMAP_AUX_CORE_BOOT_1); + else + writel_relaxed(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 4f61148ec168..7d45c84c69ba 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -54,6 +54,7 @@ #include "soc.h" #include "common.h" +#include "control.h" #include "powerdomain.h" #include "omap-secure.h" @@ -496,7 +497,8 @@ static void __init realtime_counter_init(void) void __iomem *base; static struct clk *sys_clk; unsigned long rate; - unsigned int reg, num, den; + unsigned int reg; + unsigned long long num, den; base = ioremap(REALTIME_COUNTER_BASE, SZ_32); if (!base) { @@ -511,13 +513,42 @@ static void __init realtime_counter_init(void) } rate = clk_get_rate(sys_clk); + + if (soc_is_dra7xx()) { + /* + * Errata i856 says the 32.768KHz crystal does not start at + * power on, so the CPU falls back to an emulated 32KHz clock + * based on sysclk / 610 instead. This causes the master counter + * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2 + * (OR sysclk * 75 / 244) + * + * This affects at least the DRA7/AM572x 1.0, 1.1 revisions. + * Of course any board built without a populated 32.768KHz + * crystal would also need this fix even if the CPU is fixed + * later. + * + * Either case can be detected by using the two speedselect bits + * If they are not 0, then the 32.768KHz clock driving the + * coarse counter that corrects the fine counter every time it + * ticks is actually rate/610 rather than 32.768KHz and we + * should compensate to avoid the 570ppm (at 20MHz, much worse + * at other rates) too fast system time. + */ + reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP); + if (reg & DRA7_SPEEDSELECT_MASK) { + num = 75; + den = 244; + goto sysclk1_based; + } + } + /* Numerator/denumerator values refer TRM Realtime Counter section */ switch (rate) { - case 1200000: + case 12000000: num = 64; den = 125; break; - case 1300000: + case 13000000: num = 768; den = 1625; break; @@ -529,11 +560,11 @@ static void __init realtime_counter_init(void) num = 192; den = 625; break; - case 2600000: + case 26000000: num = 384; den = 1625; break; - case 2700000: + case 27000000: num = 256; den = 1125; break; @@ -545,6 +576,7 @@ static void __init realtime_counter_init(void) break; } +sysclk1_based: /* Program numerator and denumerator registers */ reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & NUMERATOR_DENUMERATOR_MASK; @@ -556,7 +588,7 @@ static void __init realtime_counter_init(void) reg |= den; writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); - arch_timer_freq = (rate / den) * num; + arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den); set_cntfreq(); iounmap(base); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d226b71d21d5..a611f4852582 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -19,11 +19,37 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/irqchip.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> #include "core.h" +#define RK3288_GRF_SOC_CON0 0x244 + +static void __init rockchip_timer_init(void) +{ + if (of_machine_is_compatible("rockchip,rk3288")) { + struct regmap *grf; + + /* + * Disable auto jtag/sdmmc switching that causes issues + * with the mmc controllers making them unreliable + */ + grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf"); + if (!IS_ERR(grf)) + regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); + else + pr_err("rockchip: could not get grf syscon\n"); + } + + of_clk_init(NULL); + clocksource_of_init(); +} + static void __init rockchip_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = { DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, + .init_time = rockchip_timer_init, .dt_compat = rockchip_board_dt_compat, .init_machine = rockchip_dt_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 79ad93dfdae4..d191cf419731 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void) void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); +#ifdef CONFIG_ARCH_SHMOBILE_LEGACY + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + + gic_init(0, 29, gic_dist_base, gic_cpu_base); +#else irqchip_init(); +#endif /* route signals to GIC */ iowrite32(0x0, pfc_inta_ctrl); diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 93ebe3430bfe..fb5e1bb34be8 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -595,6 +595,7 @@ static struct platform_device ipmmu_device = { static struct renesas_intc_irqpin_config irqpin0_platform_data = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ + .control_parent = true, }; static struct resource irqpin0_resources[] = { @@ -656,6 +657,7 @@ static struct platform_device irqpin1_device = { static struct renesas_intc_irqpin_config irqpin2_platform_data = { .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ + .control_parent = true, }; static struct resource irqpin2_resources[] = { @@ -686,6 +688,7 @@ static struct platform_device irqpin2_device = { static struct renesas_intc_irqpin_config irqpin3_platform_data = { .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ + .control_parent = true, }; static struct resource irqpin3_resources[] = { diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 860da40b78ef..0ce5e2d65a06 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -1312,6 +1312,9 @@ static int cci_probe(void) if (!np) return -ENODEV; + if (!of_device_is_available(np)) + return -ENODEV; + cci_config = of_match_node(arm_cci_matches, np)->data; if (!cci_config) return -ENODEV; diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c index eebc52cb6984..3d95c87160b3 100644 --- a/drivers/reset/reset-sunxi.c +++ b/drivers/reset/reset-sunxi.c @@ -102,6 +102,8 @@ static int sunxi_reset_init(struct device_node *np) goto err_alloc; } + spin_lock_init(&data->lock); + data->rcdev.owner = THIS_MODULE; data->rcdev.nr_resets = size * 32; data->rcdev.ops = &sunxi_reset_ops; @@ -157,6 +159,8 @@ static int sunxi_reset_probe(struct platform_device *pdev) if (IS_ERR(data->membase)) return PTR_ERR(data->membase); + spin_lock_init(&data->lock); + data->rcdev.owner = THIS_MODULE; data->rcdev.nr_resets = resource_size(res) * 32; data->rcdev.ops = &sunxi_reset_ops; |