diff options
| -rw-r--r-- | drivers/leds/trigger/ledtrig-tty.c | 11 | ||||
| -rw-r--r-- | drivers/tty/pty.c | 15 | ||||
| -rw-r--r-- | drivers/tty/serial/max310x.c | 29 | ||||
| -rw-r--r-- | drivers/tty/tty_io.c | 5 |
4 files changed, 13 insertions, 47 deletions
diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c index d2ab6ab080ac..f62db7e520b5 100644 --- a/drivers/leds/trigger/ledtrig-tty.c +++ b/drivers/leds/trigger/ledtrig-tty.c @@ -51,10 +51,8 @@ static ssize_t ttyname_store(struct device *dev, if (size) { ttyname = kmemdup_nul(buf, size, GFP_KERNEL); - if (!ttyname) { - ret = -ENOMEM; - goto out_unlock; - } + if (!ttyname) + return -ENOMEM; } else { ttyname = NULL; } @@ -69,7 +67,6 @@ static ssize_t ttyname_store(struct device *dev, trigger_data->ttyname = ttyname; -out_unlock: mutex_unlock(&trigger_data->mutex); if (ttyname && !running) @@ -125,12 +122,12 @@ static void ledtrig_tty_work(struct work_struct *work) if (icount.rx != trigger_data->rx || icount.tx != trigger_data->tx) { - led_set_brightness(trigger_data->led_cdev, LED_ON); + led_set_brightness_sync(trigger_data->led_cdev, LED_ON); trigger_data->rx = icount.rx; trigger_data->tx = icount.tx; } else { - led_set_brightness(trigger_data->led_cdev, LED_OFF); + led_set_brightness_sync(trigger_data->led_cdev, LED_OFF); } out: diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 8b2797b6ee44..5e2374580e27 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -66,8 +66,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) wake_up_interruptible(&tty->link->read_wait); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { - struct file *f; - + set_bit(TTY_OTHER_CLOSED, &tty->flags); #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); @@ -76,17 +75,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&devpts_mutex); } #endif - - /* - * This hack is required because a program can open a - * pty and redirect a console to it, but if the pty is - * closed and the console is not released, then the - * slave side will never close. So release the - * redirect when the master closes. - */ - f = tty_release_redirect(tty->link); - if (f) - fput(f); + tty_vhangup(tty->link); } } diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 9795b2e8b0b2..1b61d26bb7af 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1056,9 +1056,9 @@ static int max310x_startup(struct uart_port *port) max310x_port_update(port, MAX310X_MODE1_REG, MAX310X_MODE1_TRNSCVCTRL_BIT, 0); - /* Reset FIFOs */ - max310x_port_write(port, MAX310X_MODE2_REG, - MAX310X_MODE2_FIFORST_BIT); + /* Configure MODE2 register & Reset FIFOs*/ + val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT; + max310x_port_write(port, MAX310X_MODE2_REG, val); max310x_port_update(port, MAX310X_MODE2_REG, MAX310X_MODE2_FIFORST_BIT, 0); @@ -1086,27 +1086,8 @@ static int max310x_startup(struct uart_port *port) /* Clear IRQ status register */ max310x_port_read(port, MAX310X_IRQSTS_REG); - /* - * Let's ask for an interrupt after a timeout equivalent to - * the receiving time of 4 characters after the last character - * has been received. - */ - max310x_port_write(port, MAX310X_RXTO_REG, 4); - - /* - * Make sure we also get RX interrupts when the RX FIFO is - * filling up quickly, so get an interrupt when half of the RX - * FIFO has been filled in. - */ - max310x_port_write(port, MAX310X_FIFOTRIGLVL_REG, - MAX310X_FIFOTRIGLVL_RX(MAX310X_FIFO_SIZE / 2)); - - /* Enable RX timeout interrupt in LSR */ - max310x_port_write(port, MAX310X_LSR_IRQEN_REG, - MAX310X_LSR_RXTO_BIT); - - /* Enable LSR, RX FIFO trigger, CTS change interrupts */ - val = MAX310X_IRQ_LSR_BIT | MAX310X_IRQ_RXFIFO_BIT | MAX310X_IRQ_TXEMPTY_BIT; + /* Enable RX, TX, CTS change interrupts */ + val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT; max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT); return 0; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 74733ec8f565..391bada4cedb 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -544,9 +544,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * @tty: tty device * * This is available to the pty code so if the master closes, if the - * slave is a redirect it can release the redirect. It returns the - * filp for the redirect, which must be fput when the operations on - * the tty are completed. + * slave is a redirect it can release the redirect. */ struct file *tty_release_redirect(struct tty_struct *tty) { @@ -561,6 +559,7 @@ struct file *tty_release_redirect(struct tty_struct *tty) return f; } +EXPORT_SYMBOL_GPL(tty_release_redirect); /** * __tty_hangup - actual handler for hangup events |