diff options
| -rw-r--r-- | drivers/regulator/core.c | 43 | ||||
| -rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 13 | ||||
| -rw-r--r-- | drivers/regulator/ti-abb-regulator.c | 12 |
3 files changed, 44 insertions, 24 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a5ad553da8cd..42bbd99a36ac 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1315,7 +1315,6 @@ static int _regulator_do_enable(struct regulator_dev *rdev); /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source - * @constraints: constraints to apply * * Allows platform initialisation code to define and constrain * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: @@ -1323,21 +1322,11 @@ static int _regulator_do_enable(struct regulator_dev *rdev); * regulator operations to proceed i.e. set_voltage, set_current_limit, * set_mode. */ -static int set_machine_constraints(struct regulator_dev *rdev, - const struct regulation_constraints *constraints) +static int set_machine_constraints(struct regulator_dev *rdev) { int ret = 0; const struct regulator_ops *ops = rdev->desc->ops; - if (constraints) - rdev->constraints = kmemdup(constraints, sizeof(*constraints), - GFP_KERNEL); - else - rdev->constraints = kzalloc(sizeof(*constraints), - GFP_KERNEL); - if (!rdev->constraints) - return -ENOMEM; - ret = machine_constraints_voltage(rdev, rdev->constraints); if (ret != 0) return ret; @@ -1852,6 +1841,15 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) } } + if (r == rdev) { + dev_err(dev, "Supply for %s (%s) resolved to itself\n", + rdev->desc->name, rdev->supply_name); + if (!have_full_constraints()) + return -EINVAL; + r = dummy_regulator_rdev; + get_device(&r->dev); + } + /* * If the supply's parent device is not the same as the * regulator's parent device, then ensure the parent device @@ -5146,7 +5144,6 @@ struct regulator_dev * regulator_register(const struct regulator_desc *regulator_desc, const struct regulator_config *cfg) { - const struct regulation_constraints *constraints = NULL; const struct regulator_init_data *init_data; struct regulator_config *config = NULL; static atomic_t regulator_no = ATOMIC_INIT(-1); @@ -5285,14 +5282,23 @@ regulator_register(const struct regulator_desc *regulator_desc, /* set regulator constraints */ if (init_data) - constraints = &init_data->constraints; + rdev->constraints = kmemdup(&init_data->constraints, + sizeof(*rdev->constraints), + GFP_KERNEL); + else + rdev->constraints = kzalloc(sizeof(*rdev->constraints), + GFP_KERNEL); + if (!rdev->constraints) { + ret = -ENOMEM; + goto wash; + } if (init_data && init_data->supply_regulator) rdev->supply_name = init_data->supply_regulator; else if (regulator_desc->supply_name) rdev->supply_name = regulator_desc->supply_name; - ret = set_machine_constraints(rdev, constraints); + ret = set_machine_constraints(rdev); if (ret == -EPROBE_DEFER) { /* Regulator might be in bypass mode and so needs its supply * to set the constraints */ @@ -5301,7 +5307,7 @@ regulator_register(const struct regulator_desc *regulator_desc, * that is just being created */ ret = regulator_resolve_supply(rdev); if (!ret) - ret = set_machine_constraints(rdev, constraints); + ret = set_machine_constraints(rdev); else rdev_dbg(rdev, "unable to resolve supply early: %pe\n", ERR_PTR(ret)); @@ -5843,13 +5849,14 @@ static int regulator_late_cleanup(struct device *dev, void *data) if (rdev->use_count) goto unlock; - /* If we can't read the status assume it's on. */ + /* If we can't read the status assume it's always on. */ if (ops->is_enabled) enabled = ops->is_enabled(rdev); else enabled = 1; - if (!enabled) + /* But if reading the status failed, assume that it's off. */ + if (enabled <= 0) goto unlock; if (have_full_constraints()) { diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 7e8ba9246167..01a12cfcea7c 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -836,11 +836,14 @@ static int pfuze100_regulator_probe(struct i2c_client *client, * the switched regulator till yet. */ if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) { - if (pfuze_chip->regulator_descs[i].sw_reg) { - desc->ops = &pfuze100_sw_disable_regulator_ops; - desc->enable_val = 0x8; - desc->disable_val = 0x0; - desc->enable_time = 500; + if (pfuze_chip->chip_id == PFUZE100 || + pfuze_chip->chip_id == PFUZE200) { + if (pfuze_chip->regulator_descs[i].sw_reg) { + desc->ops = &pfuze100_sw_disable_regulator_ops; + desc->enable_val = 0x8; + desc->disable_val = 0x0; + desc->enable_time = 500; + } } } diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index 3e60bff76194..9f0a4d50cead 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -342,8 +342,17 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel) return ret; } - /* If data is exactly the same, then just update index, no change */ info = &abb->info[sel]; + /* + * When Linux kernel is starting up, we are'nt sure of the + * Bias configuration that bootloader has configured. + * So, we get to know the actual setting the first time + * we are asked to transition. + */ + if (abb->current_info_idx == -EINVAL) + goto just_set_abb; + + /* If data is exactly the same, then just update index, no change */ oinfo = &abb->info[abb->current_info_idx]; if (!memcmp(info, oinfo, sizeof(*info))) { dev_dbg(dev, "%s: Same data new idx=%d, old idx=%d\n", __func__, @@ -351,6 +360,7 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel) goto out; } +just_set_abb: ret = ti_abb_set_opp(rdev, abb, info); out: |