diff options
25 files changed, 7855 insertions, 1 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c new file mode 100644 index 000000000000..2f332ec36f82 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -0,0 +1,146 @@ +What: /sys/bus/i3c/devices/i3c-<bus-id> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C bus. This directory will contain one sub-directory per + I3C device present on the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/current_master +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the master that owns the bus (<bus-id>-<master-pid>) at + the time this file is read. Note that bus ownership can change + overtime, so there's no guarantee that when the read() call + returns, the value returned is still valid. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/mode +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See + the I3C specification for a detailed description of what each + of these modes implies. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I3C SDR mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I2C mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to the master controller. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + This entry describes the BCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + This entry describes the DCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + This entry describes the PID of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + This entry describes the HDRCAP of the master controller + driving the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C device present on I3C bus identified by <bus-id>. Note + that all devices are represented including the master driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to device <bus-id>-<device-pid>. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + +What: /sys/bus/i3c/devices/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + These directories are just symbolic links to + /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>. diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt new file mode 100644 index 000000000000..69da2115abdc --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt @@ -0,0 +1,43 @@ +Bindings for cadence I3C master block +===================================== + +Required properties: +-------------------- +- compatible: shall be "cdns,i3c-master" +- clocks: shall reference the pclk and sysclk +- clock-names: shall contain "pclk" and "sysclk" +- interrupts: the interrupt line connected to this I3C master +- reg: I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 1 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@0d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x80000010 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt new file mode 100644 index 000000000000..ab729a0a86ae --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/i3c.txt @@ -0,0 +1,138 @@ +Generic device tree bindings for I3C busses +=========================================== + +This document describes generic bindings that should be used to describe I3C +busses in a device tree. + +Required properties +------------------- + +- #address-cells - should be <3>. Read more about addresses below. +- #size-cells - should be <0>. +- compatible - name of the I3C master controller driving the I3C bus + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. +The node describing an I3C bus should be named i3c-master. + +Optional properties +------------------- + +These properties may not be supported by all I3C master drivers. Each I3C +master bindings should specify which of them are supported. + +- i3c-scl-hz: frequency of the SCL signal used for I3C transfers. + When undefined the core sets it to 12.5MHz. + +- i2c-scl-hz: frequency of the SCL signal used for I2C transfers. + When undefined, the core looks at LVR (Legacy Virtual Register) + values of I2C devices described in the device tree to determine + the maximum I2C frequency. + +I2C devices +=========== + +Each I2C device connected to the bus should be described in a subnode. All +properties described in Documentation/devicetree/bindings/i2c/i2c.txt are +valid here, but several new properties have been added. + +New constraint on existing properties: +-------------------------------------- +- reg: contains 3 cells + + first cell : still encoding the I2C address + + + second cell: shall be 0 + + + third cell: shall encode the I3C LVR (Legacy Virtual Register) + bit[31:8]: unused/ignored + bit[7:5]: I2C device index. Possible values + * 0: I2C device has a 50 ns spike filter + * 1: I2C device does not have a 50 ns spike filter but supports high + frequency on SCL + * 2: I2C device does not have a 50 ns spike filter and is not tolerant + to high frequencies + * 3-7: reserved + + bit[4]: tell whether the device operates in FM (Fast Mode) or FM+ mode + * 0: FM+ mode + * 1: FM mode + + bit[3:0]: device type + * 0-15: reserved + +The I2C node unit-address should always match the first cell of the reg +property: <device-type>@<i2c-address>. + +I3C devices +=========== + +All I3C devices are supposed to support DAA (Dynamic Address Assignment), and +are thus discoverable. So, by default, I3C devices do not have to be described +in the device tree. +This being said, one might want to attach extra resources to these devices, +and those resources may have to be described in the device tree, which in turn +means we have to describe I3C devices. + +Another use case for describing an I3C device in the device tree is when this +I3C device has a static I2C address and we want to assign it a specific I3C +dynamic address before the DAA takes place (so that other devices on the bus +can't take this dynamic address). + +The I3C device should be names <device-type>@<static-i2c-address>,<i3c-pid>, +where device-type is describing the type of device connected on the bus +(gpio-controller, sensor, ...). + +Required properties +------------------- +- reg: contains 3 cells + + first cell : encodes the static I2C address. Should be 0 if the device does + not have one (0 is not a valid I2C address). + + + second and third cells: should encode the ProvisionalID. The second cell + contains the manufacturer ID left-shifted by 1. + The third cell contains ORing of the part ID + left-shifted by 16, the instance ID left-shifted + by 12 and the extra information. This encoding is + following the PID definition provided by the I3C + specification. + +Optional properties +------------------- +- assigned-address: dynamic address to be assigned to this device. This + property is only valid if the I3C device has a static + address (first cell of the reg property != 0). + + +Example: + + i3c-master@d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + /* I2C device. */ + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x0 0x10>; + }; + + /* I3C device with a static I2C address. */ + thermal_sensor: sensor@68,39200144004 { + reg = <0x68 0x392 0x144004>; + assigned-address = <0xa>; + }; + + /* + * I3C device without a static I2C address but requiring + * resources described in the DT. + */ + sensor@0,39200154004 { + reg = <0x0 0x392 0x154004>; + clocks = <&clock_provider 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt new file mode 100644 index 000000000000..5020eb71eb8d --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt @@ -0,0 +1,41 @@ +Bindings for Synopsys DesignWare I3C master block +================================================= + +Required properties: +-------------------- +- compatible: shall be "snps,dw-i3c-master-1.00a" +- clocks: shall reference the core_clk +- interrupts: the interrupt line connected to this I3C master +- reg: Offset and length of I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 3 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@2000 { + compatible = "snps,dw-i3c-master-1.00a"; + #address-cells = <3>; + #size-cells = <0>; + reg = <0x02000 0x1000>; + interrupts = <0>; + clocks = <&i3cclk>; + + eeprom@57{ + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; + }; + }; diff --git a/Documentation/driver-api/i3c/device-driver-api.rst b/Documentation/driver-api/i3c/device-driver-api.rst new file mode 100644 index 000000000000..85bc3381cd3e --- /dev/null +++ b/Documentation/driver-api/i3c/device-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +I3C device driver API +===================== + +.. kernel-doc:: include/linux/i3c/device.h + +.. kernel-doc:: drivers/i3c/device.c diff --git a/Documentation/driver-api/i3c/index.rst b/Documentation/driver-api/i3c/index.rst new file mode 100644 index 000000000000..783d6dad054b --- /dev/null +++ b/Documentation/driver-api/i3c/index.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +I3C subsystem +============= + +.. toctree:: + + protocol + device-driver-api + master-driver-api diff --git a/Documentation/driver-api/i3c/master-driver-api.rst b/Documentation/driver-api/i3c/master-driver-api.rst new file mode 100644 index 000000000000..332552b28358 --- /dev/null +++ b/Documentation/driver-api/i3c/master-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +I3C master controller driver API +================================ + +.. kernel-doc:: drivers/i3c/master.c + +.. kernel-doc:: include/linux/i3c/master.h diff --git a/Documentation/driver-api/i3c/protocol.rst b/Documentation/driver-api/i3c/protocol.rst new file mode 100644 index 000000000000..dae3b6d32c6b --- /dev/null +++ b/Documentation/driver-api/i3c/protocol.rst @@ -0,0 +1,203 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +I3C protocol +============ + +Disclaimer +========== + +This chapter will focus on aspects that matter to software developers. For +everything hardware related (like how things are transmitted on the bus, how +collisions are prevented, ...) please have a look at the I3C specification. + +This document is just a brief introduction to the I3C protocol and the concepts +it brings to the table. If you need more information, please refer to the MIPI +I3C specification (can be downloaded here +http://resources.mipi.org/mipi-i3c-v1-download). + +Introduction +============ + +The I3C (pronounced 'eye-three-see') is a MIPI standardized protocol designed +to overcome I2C limitations (limited speed, external signals needed for +interrupts, no automatic detection of the devices connected to the bus, ...) +while remaining power-efficient. + +I3C Bus +======= + +An I3C bus is made of several I3C devices and possibly some I2C devices as +well, but let's focus on I3C devices for now. + +An I3C device on the I3C bus can have one of the following roles: + +* Master: the device is driving the bus. It's the one in charge of initiating + transactions or deciding who is allowed to talk on the bus (slave generated + events are possible in I3C, see below). +* Slave: the device acts as a slave, and is not able to send frames to another + slave on the bus. The device can still send events to the master on + its own initiative if the master allowed it. + +I3C is a multi-master protocol, so there might be several masters on a bus, +though only one device can act as a master at a given time. In order to gain +bus ownership, a master has to follow a specific procedure. + +Each device on the I3C bus has to be assigned a dynamic address to be able to +communicate. Until this is done, the device should only respond to a limited +set of commands. If it has a static address (also called legacy I2C address), +the device can reply to I2C transfers. + +In addition to these per-device addresses, the protocol defines a broadcast +address in order to address all devices on the bus. + +Once a dynamic address has been assigned to a device, this address will be used +for any direct communication with the device. Note that even after being +assigned a dynamic address, the device should still process broadcast messages. + +I3C Device discovery +==================== + +The I3C protocol defines a mechanism to automatically discover devices present +on the bus, their capabilities and the functionalities they provide. In this +regard I3C is closer to a discoverable bus like USB than it is to I2C or SPI. + +The discovery mechanism is called DAA (Dynamic Address Assignment), because it +not only discovers devices but also assigns them a dynamic address. + +During DAA, each I3C device reports 3 important things: + +* BCR: Bus Characteristic Register. This 8-bit register describes the device bus + related capabilities +* DCR: Device Characteristic Register. This 8-bit register describes the + functionalities provided by the device +* Provisional ID: A 48-bit unique identifier. On a given bus there should be no + Provisional ID collision, otherwise the discovery mechanism may fail. + +I3C slave events +================ + +The I3C protocol allows slaves to generate events on their own, and thus allows +them to take temporary control of the bus. + +This mechanism is called IBI for In Band Interrupts, and as stated in the name, +it allows devices to generate interrupts without requiring an external signal. + +During DAA, each device on the bus has been assigned an address, and this +address will serve as a priority identifier to determine who wins if 2 different +devices are generating an interrupt at the same moment on the bus (the lower the +dynamic address the higher the priority). + +Masters are allowed to inhibit interrupts if they want to. This inhibition +request can be broadcast (applies to all devices) or sent to a specific +device. + +I3C Hot-Join +============ + +The Hot-Join mechanism is similar to USB hotplug. This mechanism allows +slaves to join the bus after it has been initialized by the master. + +This covers the following use cases: + +* the device is not powered when the bus is probed +* the device is hotplugged on the bus through an extension board + +This mechanism is relying on slave events to inform the master that a new +device joined the bus and is waiting for a dynamic address. + +The master is then free to address the request as it wishes: ignore it or +assign a dynamic address to the slave. + +I3C transfer types +================== + +If you omit SMBus (which is just a standardization on how to access registers +exposed by I2C devices), I2C has only one transfer type. + +I3C defines 3 different classes of transfer in addition to I2C transfers which +are here for backward compatibility with I2C devices. + +I3C CCC commands +---------------- + +CCC (Common Command Code) commands are meant to be used for anything that is +related to bus management and all features that are common to a set of devices. + +CCC commands contain an 8-bit CCC ID describing the command that is executed. +The MSB of this ID specifies whether this is a broadcast command (bit7 = 0) or a +unicast one (bit7 = 1). + +The command ID can be followed by a payload. Depending on the command, this +payload is either sent by the master sending the command (write CCC command), +or sent by the slave receiving the command (read CCC command). Of course, read +accesses only apply to unicast commands. +Note that, when sending a CCC command to a specific device, the device address +is passed in the first byte of the payload. + +The payload length is not explicitly passed on the bus, and should be extracted +from the CCC ID. + +Note that vendors can use a dedicated range of CCC IDs for their own commands +(0x61-0x7f and 0xe0-0xef). + +I3C Private SDR transfers +------------------------- + +Private SDR (Single Data Rate) transfers should be used for anything that is +device specific and does not require high transfer speed. + +It is the equivalent of I2C transfers but in the I3C world. Each transfer is +passed the device address (dynamic address assigned during DAA), a payload +and a direction. + +The only difference with I2C is that the transfer is much faster (typical clock +frequency is 12.5MHz). + +I3C HDR commands +---------------- + +HDR commands should be used for anything that is device specific and requires +high transfer speed. + +The first thing attached to an HDR command is the HDR mode. There are currently +3 different modes defined by the I3C specification (refer to the specification +for more details): + +* HDR-DDR: Double Data Rate mode +* HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices +* HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices + +When sending an HDR command, the whole bus has to enter HDR mode, which is done +using a broadcast CCC command. +Once the bus has entered a specific HDR mode, the master sends the HDR command. +An HDR command is made of: + +* one 16-bits command word in big endian +* N 16-bits data words in big endian + +Those words may be wrapped with specific preambles/post-ambles which depend on +the chosen HDR mode and are detailed here (see the specification for more +details). + +The 16-bits command word is made of: + +* bit[15]: direction bit, read is 1, write is 0 +* bit[14:8]: command code. Identifies the command being executed, the amount of + data words and their meaning +* bit[7:1]: I3C address of the device this command is addressed to +* bit[0]: reserved/parity-bit + +Backward compatibility with I2C devices +======================================= + +The I3C protocol has been designed to be backward compatible with I2C devices. +This backward compatibility allows one to connect a mix of I2C and I3C devices +on the same bus, though, in order to be really efficient, I2C devices should +be equipped with 50 ns spike filters. + +I2C devices can't be discovered like I3C ones and have to be statically +declared. In order to let the master know what these devices are capable of +(both in terms of bus related limitations and functionalities), the software +has to provide some information, which is done through the LVR (Legacy I2C +Virtual Register). diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 909f991b4c0d..ab38ced66a44 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -33,6 +33,7 @@ available subsections can be seen below. pci/index spi i2c + i3c/index hsi edac scsi diff --git a/MAINTAINERS b/MAINTAINERS index 6df3506d8866..6e6a9af7d850 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7088,6 +7088,24 @@ L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/i2c-stub.c +I3C SUBSYSTEM +M: Boris Brezillon <bbrezillon@kernel.org> +L: linux-i3c@lists.infradead.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux.git +S: Maintained +F: Documentation/ABI/testing/sysfs-bus-i3c +F: Documentation/devicetree/bindings/i3c/ +F: Documentation/driver-api/i3c +F: drivers/i3c/ +F: include/linux/i3c/ +F: include/dt-bindings/i3c/ + +I3C DRIVER FOR SYNOPSYS DESIGNWARE +M: Vitor Soares <vitor.soares@synopsys.com> +S: Maintained +F: Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt +F: drivers/i3c/master/dw* + IA64 (Itanium) PLATFORM M: Tony Luck <tony.luck@intel.com> M: Fenghua Yu <fenghua.yu@intel.com> diff --git a/drivers/Kconfig b/drivers/Kconfig index ab4d43923c4d..8395bc515996 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -57,6 +57,8 @@ source "drivers/char/Kconfig" source "drivers/i2c/Kconfig" +source "drivers/i3c/Kconfig" + source "drivers/spi/Kconfig" source "drivers/spmi/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 578f469f72fb..e1ce029d28fd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -111,7 +111,7 @@ obj-$(CONFIG_SERIO) += input/serio/ obj-$(CONFIG_GAMEPORT) += input/gameport/ obj-$(CONFIG_INPUT) += input/ obj-$(CONFIG_RTC_LIB) += rtc/ -obj-y += i2c/ media/ +obj-y += i2c/ i3c/ media/ obj-$(CONFIG_PPS) += pps/ obj-y += ptp/ obj-$(CONFIG_W1) += w1/ diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig new file mode 100644 index 000000000000..30a441506f61 --- /dev/null +++ b/drivers/i3c/Kconfig @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 + +menuconfig I3C + tristate "I3C support" + select I2C + help + I3C is a serial protocol standardized by the MIPI alliance. + + It's supposed to be backward compatible with I2C while providing + support for high speed transfers and native interrupt support + without the need for extra pins. + + The I3C protocol also standardizes the slave device types and is + mainly designed to communicate with sensors. + + If you want I3C support, you should say Y here and also to the + specific driver for your bus adapter(s) below. + + This I3C support can also be built as a module. If so, the module + will be called i3c. + +if I3C +source "drivers/i3c/master/Kconfig" +endif # I3C diff --git a/drivers/i3c/Makefile b/drivers/i3c/Makefile new file mode 100644 index 000000000000..11982efbc6d9 --- /dev/null +++ b/drivers/i3c/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +i3c-y := device.o master.o +obj-$(CONFIG_I3C) += i3c.o +obj-$(CONFIG_I3C) += master/ diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c new file mode 100644 index 000000000000..69cc040c3a1c --- /dev/null +++ b/drivers/i3c/device.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#include <linux/atomic.h> +#include <linux/bug.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include "internals.h" + +/** + * i3c_device_do_priv_xfers() - do I3C SDR private transfers directed to a + * specific device + * + * @dev: device with which the transfers should be done + * @xfers: array of transfers + * @nxfers: number of transfers + * + * Initiate one or several private SDR transfers with @dev. + * + * This function can sleep and thus cannot be called in atomic context. + * + * Return: 0 in case of success, a negative error core otherwise. + */ +int i3c_device_do_priv_xfers(struct i3c_device *dev, + struct i3c_priv_xfer *xfers, + int nxfers) +{ + int ret, i; + + if (nxfers < 1) + return 0; + + for (i = 0; i < nxfers; i++) { + if (!xfers[i].len || !xfers[i].data.in) + return -EINVAL; + } + + i3c_bus_normaluse_lock(dev->bus); + ret = i3c_dev_do_priv_xfers_locked(dev->desc, xfers, nxfers); + i3c_bus_normaluse_unlock(dev->bus); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers); + +/** + * i3c_device_get_info() - get I3C device information + * + * @dev: device we want information on + * @info: the information object to fill in + * + * Retrieve I3C dev info. + */ +void i3c_device_get_info(struct i3c_device *dev, + struct i3c_device_info *info) +{ + if (!info) + return; + + i3c_bus_normaluse_lock(dev->bus); + if (dev->desc) + *info = dev->desc->info; + i3c_bus_normaluse_unlock(dev->bus); +} +EXPORT_SYMBOL_GPL(i3c_device_get_info); + +/** + * i3c_device_disable_ibi() - Disable IBIs coming from a specific device + * @dev: device on which IBIs should be disabled + * + * This function disable IBIs coming from a specific device and wait for + * all pending IBIs to be processed. + * + * Return: 0 in case of success, a negative error core otherwise. + */ +int i3c_device_disable_ibi(struct i3c_device *dev) +{ + int ret = -ENOENT; + + i3c_bus_normaluse_lock(dev->bus); + if (dev->desc) { + mutex_lock(&dev->desc->ibi_lock); + ret = i3c_dev_disable_ibi_locked(dev->desc); + mutex_unlock(&dev->desc->ibi_lock); + } + i3c_bus_normaluse_unlock(dev->bus); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_device_disable_ibi); + +/** + * i3c_device_enable_ibi() - Enable IBIs coming from a specific device + * @dev: device on which IBIs should be enabled + * + * This function enable IBIs coming from a specific device and wait for + * all pending IBIs to be processed. This should be called on a device + * where i3c_device_request_ibi() has succeeded. + * + * Note that IBIs from this device might be received before this function + * returns to its caller. + * + * Return: 0 in case of success, a negative error core otherwise. + */ +int i3c_device_enable_ibi(struct i3c_device *dev) +{ + int ret = -ENOENT; + + i3c_bus_normaluse_lock(dev->bus); + if (dev->desc) { + mutex_lock(&dev->desc->ibi_lock); + ret = i3c_dev_enable_ibi_locked(dev->desc); + mutex_unlock(&dev->desc->ibi_lock); + } + i3c_bus_normaluse_unlock(dev->bus); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_device_enable_ibi); + +/** + * i3c_device_request_ibi() - Request an IBI + * @dev: device for which we should enable IBIs + * @req: setup requested for this IBI + * + * This function is responsible for pre-allocating all resources needed to + * process IBIs coming from @dev. When this function returns, the IBI is not + * enabled until i3c_device_enable_ibi() is called. + * + * Return: 0 in case of success, a negative error core otherwise. + */ +int i3c_device_request_ibi(struct i3c_device *dev, + const struct i3c_ibi_setup *req) +{ + int ret = -ENOENT; + + if (!req->handler || !req->num_slots) + return -EINVAL; + + i3c_bus_normaluse_lock(dev->bus); + if (dev->desc) { + mutex_lock(&dev->desc->ibi_lock); + ret = i3c_dev_request_ibi_locked(dev->desc, req); + mutex_unlock(&dev->desc->ibi_lock); + } + i3c_bus_normaluse_unlock(dev->bus); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_device_request_ibi); + +/** + * i3c_device_free_ibi() - Free all resources needed for IBI handling + * @dev: device on which you want to release IBI resources + * + * This function is responsible for de-allocating resources previously + * allocated by i3c_device_request_ibi(). It should be called after disabling + * IBIs with i3c_device_disable_ibi(). + */ +void i3c_device_free_ibi(struct i3c_device *dev) +{ + i3c_bus_normaluse_lock(dev->bus); + if (dev->desc) { + mutex_lock(&dev->desc->ibi_lock); + i3c_dev_free_ibi_locked(dev->desc); + mutex_unlock(&dev->desc->ibi_lock); + } + i3c_bus_normaluse_unlock(dev->bus); +} +EXPORT_SYMBOL_GPL(i3c_device_free_ibi); + +/** + * i3cdev_to_dev() - Returns the device embedded in @i3cdev + * @i3cdev: I3C device + * + * Return: a pointer to a device object. + */ +struct device *i3cdev_to_dev(struct i3c_device *i3cdev) +{ + return &i3cdev->dev; +} +EXPORT_SYMBOL_GPL(i3cdev_to_dev); + +/** + * dev_to_i3cdev() - Returns the I3C device containing @dev + * @dev: device object + * + * Return: a pointer to an I3C device object. + */ +struct i3c_device *dev_to_i3cdev(struct device *dev) +{ + return container_of(dev, struct i3c_device, dev); +} +EXPORT_SYMBOL_GPL(dev_to_i3cdev); + +/** + * i3c_driver_register_with_owner() - register an I3C device driver + * + * @drv: driver to register + * @owner: module that owns this driver + * + * Register @drv to the core. + * + * Return: 0 in case of success, a negative error core otherwise. + */ +int i3c_driver_register_with_owner(struct i3c_driver *drv, struct module *owner) +{ + drv->driver.owner = owner; + drv->driver.bus = &i3c_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(i3c_driver_register_with_owner); + +/** + * i3c_driver_unregister() - unregister an I3C device driver + * + * @drv: driver to unregister + * + * Unregister @drv. + */ +void i3c_driver_unregister(struct i3c_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(i3c_driver_unregister); diff --git a/drivers/i3c/internals.h b/drivers/i3c/internals.h new file mode 100644 index 000000000000..86b7b44cfca2 --- /dev/null +++ b/drivers/i3c/internals.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_INTERNALS_H +#define I3C_INTERNALS_H + +#include <linux/i3c/master.h> + +extern struct bus_type i3c_bus_type; + +void i3c_bus_normaluse_lock(struct i3c_bus *bus); +void i3c_bus_normaluse_unlock(struct i3c_bus *bus); + +int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers); +int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev); +int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev); +int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); +void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev); +#endif /* I3C_INTERNAL_H */ diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c new file mode 100644 index 000000000000..c39f89d2deba --- /dev/null +++ b/drivers/i3c/master.c @@ -0,0 +1,2659 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#include <linux/atomic.h> +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#include "internals.h" + +static DEFINE_IDR(i3c_bus_idr); +static DEFINE_MUTEX(i3c_core_lock); + +/** + * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation + * @bus: I3C bus to take the lock on + * + * This function takes the bus lock so that no other operations can occur on + * the bus. This is needed for all kind of bus maintenance operation, like + * - enabling/disabling slave events + * - re-triggering DAA + * - changing the dynamic address of a device + * - relinquishing mastership + * - ... + * + * The reason for this kind of locking is that we don't want drivers and core + * logic to rely on I3C device information that could be changed behind their + * back. + */ +static void i3c_bus_maintenance_lock(struct i3c_bus *bus) +{ + down_write(&bus->lock); +} + +/** + * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance + * operation + * @bus: I3C bus to release the lock on + * + * Should be called when the bus maintenance operation is done. See + * i3c_bus_maintenance_lock() for more details on what these maintenance + * operations are. + */ +static void i3c_bus_maintenance_unlock(struct i3c_bus *bus) +{ + up_write(&bus->lock); +} + +/** + * i3c_bus_normaluse_lock - Lock the bus for a normal operation + * @bus: I3C bus to take the lock on + * + * This function takes the bus lock for any operation that is not a maintenance + * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of + * maintenance operations). Basically all communications with I3C devices are + * normal operations (HDR, SDR transfers or CCC commands that do not change bus + * state or I3C dynamic address). + * + * Note that this lock is not guaranteeing serialization of normal operations. + * In other words, transfer requests passed to the I3C master can be submitted + * in parallel and I3C master drivers have to use their own locking to make + * sure two different communications are not inter-mixed, or access to the + * output/input queue is not done while the engine is busy. + */ +void i3c_bus_normaluse_lock(struct i3c_bus *bus) +{ + down_read(&bus->lock); +} + +/** + * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation + * @bus: I3C bus to release the lock on + * + * Should be called when a normal operation is done. See + * i3c_bus_normaluse_lock() for more details on what these normal operations + * are. + */ +void i3c_bus_normaluse_unlock(struct i3c_bus *bus) +{ + up_read(&bus->lock); +} + +static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev) +{ + return container_of(dev, struct i3c_master_controller, dev); +} + +static const struct device_type i3c_device_type; + +static struct i3c_bus *dev_to_i3cbus(struct device *dev) +{ + struct i3c_master_controller *master; + + if (dev->type == &i3c_device_type) + return dev_to_i3cdev(dev)->bus; + + master = dev_to_i3cmaster(dev); + + return &master->bus; +} + +static struct i3c_dev_desc *dev_to_i3cdesc(struct device *dev) +{ + struct i3c_master_controller *master; + + if (dev->type == &i3c_device_type) + return dev_to_i3cdev(dev)->desc; + + master = container_of(dev, struct i3c_master_controller, dev); + + return master->this; +} + +static ssize_t bcr_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *bus = dev_to_i3cbus(dev); + struct i3c_dev_desc *desc; + ssize_t ret; + + i3c_bus_normaluse_lock(bus); + desc = dev_to_i3cdesc(dev); + ret = sprintf(buf, "%x\n", desc->info.bcr); + i3c_bus_normaluse_unlock(bus); + + return ret; +} +static DEVICE_ATTR_RO(bcr); + +static ssize_t dcr_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *bus = dev_to_i3cbus(dev); + struct i3c_dev_desc *desc; + ssize_t ret; + + i3c_bus_normaluse_lock(bus); + desc = dev_to_i3cdesc(dev); + ret = sprintf(buf, "%x\n", desc->info.dcr); + i3c_bus_normaluse_unlock(bus); + + return ret; +} +static DEVICE_ATTR_RO(dcr); + +static ssize_t pid_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *bus = dev_to_i3cbus(dev); + struct i3c_dev_desc *desc; + ssize_t ret; + + i3c_bus_normaluse_lock(bus); + desc = dev_to_i3cdesc(dev); + ret = sprintf(buf, "%llx\n", desc->info.pid); + i3c_bus_normaluse_unlock(bus); + + return ret; +} +static DEVICE_ATTR_RO(pid); + +static ssize_t dynamic_address_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *bus = dev_to_i3cbus(dev); + struct i3c_dev_desc *desc; + ssize_t ret; + + i3c_bus_normaluse_lock(bus); + desc = dev_to_i3cdesc(dev); + ret = sprintf(buf, "%02x\n", desc->info.dyn_addr); + i3c_bus_normaluse_unlock(bus); + + return ret; +} +static DEVICE_ATTR_RO(dynamic_address); + +static const char * const hdrcap_strings[] = { + "hdr-ddr", "hdr-tsp", "hdr-tsl", +}; + +static ssize_t hdrcap_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *bus = dev_to_i3cbus(dev); + struct i3c_dev_desc *desc; + ssize_t offset = 0, ret; + unsigned long caps; + int mode; + + i3c_bus_normaluse_lock(bus); + desc = dev_to_i3cdesc(dev); + caps = desc->info.hdr_cap; + for_each_set_bit(mode, &caps, 8) { + if (mode >= ARRAY_SIZE(hdrcap_strings)) + break; + + if (!hdrcap_strings[mode]) + continue; + + ret = sprintf(buf + offset, offset ? " %s" : "%s", + hdrcap_strings[mode]); + if (ret < 0) + goto out; + + offset += ret; + } + + ret = sprintf(buf + offset, "\n"); + if (ret < 0) + goto out; + + ret = offset + ret; + +out: + i3c_bus_normaluse_unlock(bus); + + return ret; +} +static DEVICE_ATTR_RO(hdrcap); + +static struct attribute *i3c_device_attrs[] = { + &dev_attr_bcr.attr, + &dev_attr_dcr.attr, + &dev_attr_pid.attr, + &dev_attr_dynamic_address.attr, + &dev_attr_hdrcap.attr, + NULL, +}; +ATTRIBUTE_GROUPS(i3c_device); + +static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct i3c_device *i3cdev = dev_to_i3cdev(dev); + struct i3c_device_info devinfo; + u16 manuf, part, ext; + + i3c_device_get_info(i3cdev, &devinfo); + manuf = I3C_PID_MANUF_ID(devinfo.pid); + part = I3C_PID_PART_ID(devinfo.pid); + ext = I3C_PID_EXTRA_INFO(devinfo.pid); + + if (I3C_PID_RND_LOWER_32BITS(devinfo.pid)) + return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X", + devinfo.dcr, manuf); + + return add_uevent_var(env, + "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x", + devinfo.dcr, manuf, part, ext); +} + +static const struct device_type i3c_device_type = { + .groups = i3c_device_groups, + .uevent = i3c_device_uevent, +}; + +static const struct i3c_device_id * +i3c_device_match_id(struct i3c_device *i3cdev, + const struct i3c_device_id *id_table) +{ + struct i3c_device_info devinfo; + const struct i3c_device_id *id; + + i3c_device_get_info(i3cdev, &devinfo); + + /* + * The lower 32bits of the provisional ID is just filled with a random + * value, try to match using DCR info. + */ + if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) { + u16 manuf = I3C_PID_MANUF_ID(devinfo.pid); + u16 part = I3C_PID_PART_ID(devinfo.pid); + u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid); + + /* First try to match by manufacturer/part ID. */ + for (id = id_table; id->match_flags != 0; id++) { + if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) != + I3C_MATCH_MANUF_AND_PART) + continue; + + if (manuf != id->manuf_id || part != id->part_id) + continue; + + if ((id->match_flags & I3C_MATCH_EXTRA_INFO) && + ext_info != id->extra_info) + continue; + + return id; + } + } + + /* Fallback to DCR match. */ + for (id = id_table; id->match_flags != 0; id++) { + if ((id->match_flags & I3C_MATCH_DCR) && + id->dcr == devinfo.dcr) + return id; + } + + return NULL; +} + +static int i3c_device_match(struct device *dev, struct device_driver *drv) +{ + struct i3c_device *i3cdev; + struct i3c_driver *i3cdrv; + + if (dev->type != &i3c_device_type) + return 0; + + i3cdev = dev_to_i3cdev(dev); + i3cdrv = drv_to_i3cdrv(drv); + if (i3c_device_match_id(i3cdev, i3cdrv->id_table)) + return 1; + + return 0; +} + +static int i3c_device_probe(struct device *dev) +{ + struct i3c_device *i3cdev = dev_to_i3cdev(dev); + struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); + + return driver->probe(i3cdev); +} + +static int i3c_device_remove(struct device *dev) +{ + struct i3c_device *i3cdev = dev_to_i3cdev(dev); + struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); + int ret; + + ret = driver->remove(i3cdev); + if (ret) + return ret; + + i3c_device_free_ibi(i3cdev); + + return ret; +} + +struct bus_type i3c_bus_type = { + .name = "i3c", + .match = i3c_device_match, + .probe = i3c_device_probe, + .remove = i3c_device_remove, +}; + +static enum i3c_addr_slot_status +i3c_bus_get_addr_slot_status(struct i3c_bus *bus, u16 addr) +{ + int status, bitpos = addr * 2; + + if (addr > I2C_MAX_ADDR) + return I3C_ADDR_SLOT_RSVD; + + status = bus->addrslots[bitpos / BITS_PER_LONG]; + status >>= bitpos % BITS_PER_LONG; + + return status & I3C_ADDR_SLOT_STATUS_MASK; +} + +static void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr, + enum i3c_addr_slot_status status) +{ + int bitpos = addr * 2; + unsigned long *ptr; + + if (addr > I2C_MAX_ADDR) + return; + + ptr = bus->addrslots + (bitpos / BITS_PER_LONG); + *ptr &= ~(I3C_ADDR_SLOT_STATUS_MASK << (bitpos % BITS_PER_LONG)); + *ptr |= status << (bitpos % BITS_PER_LONG); +} + +static bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr) +{ + enum i3c_addr_slot_status status; + + status = i3c_bus_get_addr_slot_status(bus, addr); + + return status == I3C_ADDR_SLOT_FREE; +} + +static int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr) +{ + enum i3c_addr_slot_status status; + u8 addr; + + for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) { + status = i3c_bus_get_addr_slot_status(bus, addr); + if (status == I3C_ADDR_SLOT_FREE) + return addr; + } + + return -ENOMEM; +} + +static void i3c_bus_init_addrslots(struct i3c_bus *bus) +{ + int i; + + /* Addresses 0 to 7 are reserved. */ + for (i = 0; i < 8; i++) + i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD); + + /* + * Reserve broadcast address and all addresses that might collide + * with the broadcast address when facing a single bit error. + */ + i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR, + I3C_ADDR_SLOT_RSVD); + for (i = 0; i < 7; i++) + i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i), + I3C_ADDR_SLOT_RSVD); +} + +static void i3c_bus_cleanup(struct i3c_bus *i3cbus) +{ + mutex_lock(&i3c_core_lock); + idr_remove(&i3c_bus_idr, i3cbus->id); + mutex_unlock(&i3c_core_lock); +} + +static int i3c_bus_init(struct i3c_bus *i3cbus) +{ + int ret; + + init_rwsem(&i3cbus->lock); + INIT_LIST_HEAD(&i3cbus->devs.i2c); + INIT_LIST_HEAD(&i3cbus->devs.i3c); + i3c_bus_init_addrslots(i3cbus); + i3cbus->mode = I3C_BUS_MODE_PURE; + + mutex_lock(&i3c_core_lock); + ret = idr_alloc(&i3c_bus_idr, i3cbus, 0, 0, GFP_KERNEL); + mutex_unlock(&i3c_core_lock); + + if (ret < 0) + return ret; + + i3cbus->id = ret; + + return 0; +} + +static const char * const i3c_bus_mode_strings[] = { + [I3C_BUS_MODE_PURE] = "pure", + [I3C_BUS_MODE_MIXED_FAST] = "mixed-fast", + [I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow", +}; + +static ssize_t mode_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *i3cbus = dev_to_i3cbus(dev); + ssize_t ret; + + i3c_bus_normaluse_lock(i3cbus); + if (i3cbus->mode < 0 || + i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) || + !i3c_bus_mode_strings[i3cbus->mode]) + ret = sprintf(buf, "unknown\n"); + else + ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]); + i3c_bus_normaluse_unlock(i3cbus); + + return ret; +} +static DEVICE_ATTR_RO(mode); + +static ssize_t current_master_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *i3cbus = dev_to_i3cbus(dev); + ssize_t ret; + + i3c_bus_normaluse_lock(i3cbus); + ret = sprintf(buf, "%d-%llx\n", i3cbus->id, + i3cbus->cur_master->info.pid); + i3c_bus_normaluse_unlock(i3cbus); + + return ret; +} +static DEVICE_ATTR_RO(current_master); + +static ssize_t i3c_scl_frequency_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *i3cbus = dev_to_i3cbus(dev); + ssize_t ret; + + i3c_bus_normaluse_lock(i3cbus); + ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c); + i3c_bus_normaluse_unlock(i3cbus); + + return ret; +} +static DEVICE_ATTR_RO(i3c_scl_frequency); + +static ssize_t i2c_scl_frequency_show(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i3c_bus *i3cbus = dev_to_i3cbus(dev); + ssize_t ret; + + i3c_bus_normaluse_lock(i3cbus); + ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c); + i3c_bus_normaluse_unlock(i3cbus); + + return ret; +} +static DEVICE_ATTR_RO(i2c_scl_frequency); + +static struct attribute *i3c_masterdev_attrs[] = { + &dev_attr_mode.attr, + &dev_attr_current_master.attr, + &dev_attr_i3c_scl_frequency.attr, + &dev_attr_i2c_scl_frequency.attr, + &dev_attr_bcr.attr, + &dev_attr_dcr.attr, + &dev_attr_pid.attr, + &dev_attr_dynamic_address.attr, + &dev_attr_hdrcap.attr, + NULL, +}; +ATTRIBUTE_GROUPS(i3c_masterdev); + +static void i3c_masterdev_release(struct device *dev) +{ + struct i3c_master_controller *master = dev_to_i3cmaster(dev); + struct i3c_bus *bus = dev_to_i3cbus(dev); + + if (master->wq) + destroy_workqueue(master->wq); + + WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c)); + i3c_bus_cleanup(bus); + + of_node_put(dev->of_node); +} + +static const struct device_type i3c_masterdev_type = { + .groups = i3c_masterdev_groups, +}; + +int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode) +{ + i3cbus->mode = mode; + + if (!i3cbus->scl_rate.i3c) + i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE; + + if (!i3cbus->scl_rate.i2c) { + if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW) + i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE; + else + i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE; + } + + /* + * I3C/I2C frequency may have been overridden, check that user-provided + * values are not exceeding max possible frequency. + */ + if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE || + i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) + return -EINVAL; + + return 0; +} + +static struct i3c_master_controller * +i2c_adapter_to_i3c_master(struct i2c_adapter *adap) +{ + return container_of(adap, struct i3c_master_controller, i2c); +} + +static struct i2c_adapter * +i3c_master_to_i2c_adapter(struct i3c_master_controller *master) +{ + return &master->i2c; +} + +static void i3c_master_free_i2c_dev(struct i2c_dev_desc *dev) +{ + kfree(dev); +} + +static struct i2c_dev_desc * +i3c_master_alloc_i2c_dev(struct i3c_master_controller *master, + const struct i2c_dev_boardinfo *boardinfo) +{ + struct i2c_dev_desc *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + dev->common.master = master; + dev->boardinfo = boardinfo; + + return dev; +} + +static void *i3c_ccc_cmd_dest_init(struct i3c_ccc_cmd_dest *dest, u8 addr, + u16 payloadlen) +{ + dest->addr = addr; + dest->payload.len = payloadlen; + if (payloadlen) + dest->payload.data = kzalloc(payloadlen, GFP_KERNEL); + else + dest->payload.data = NULL; + + return dest->payload.data; +} + +static void i3c_ccc_cmd_dest_cleanup(struct i3c_ccc_cmd_dest *dest) +{ + kfree(dest->payload.data); +} + +static void i3c_ccc_cmd_init(struct i3c_ccc_cmd *cmd, bool rnw, u8 id, + struct i3c_ccc_cmd_dest *dests, + unsigned int ndests) +{ + cmd->rnw = rnw ? 1 : 0; + cmd->id = id; + cmd->dests = dests; + cmd->ndests = ndests; + cmd->err = I3C_ERROR_UNKNOWN; +} + +static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master, + struct i3c_ccc_cmd *cmd) +{ + int ret; + + if (!cmd || !master) + return -EINVAL; + + if (WARN_ON(master->init_done && + !rwsem_is_locked(&master->bus.lock))) + return -EINVAL; + + if (!master->ops->send_ccc_cmd) + return -ENOTSUPP; + + if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests)) + return -EINVAL; + + if (master->ops->supports_ccc_cmd && + !master->ops->supports_ccc_cmd(master, cmd)) + return -ENOTSUPP; + + ret = master->ops->send_ccc_cmd(master, cmd); + if (ret) { + if (cmd->err != I3C_ERROR_UNKNOWN) + return cmd->err; + + return ret; + } + + return 0; +} + +static struct i2c_dev_desc * +i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master, + u16 addr) +{ + struct i2c_dev_desc *dev; + + i3c_bus_for_each_i2cdev(&master->bus, dev) { + if (dev->boardinfo->base.addr == addr) + return dev; + } + + return NULL; +} + +/** + * i3c_master_get_free_addr() - get a free address on the bus + * @master: I3C master object + * @start_addr: where to start searching + * + * This function must be called with the bus lock held in write mode. + * + * Return: the first free address starting at @start_addr (included) or -ENOMEM + * if there's no more address available. + */ +int i3c_master_get_free_addr(struct i3c_master_controller *master, + u8 start_addr) +{ + return i3c_bus_get_free_addr(&master->bus, start_addr); +} +EXPORT_SYMBOL_GPL(i3c_master_get_free_addr); + +static void i3c_device_release(struct device *dev) +{ + struct i3c_device *i3cdev = dev_to_i3cdev(dev); + + WARN_ON(i3cdev->desc); + + of_node_put(i3cdev->dev.of_node); + kfree(i3cdev); +} + +static void i3c_master_free_i3c_dev(struct i3c_dev_desc *dev) +{ + kfree(dev); +} + +static struct i3c_dev_desc * +i3c_master_alloc_i3c_dev(struct i3c_master_controller *master, + const struct i3c_device_info *info) +{ + struct i3c_dev_desc *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + dev->common.master = master; + dev->info = *info; + mutex_init(&dev->ibi_lock); + + return dev; +} + +static int i3c_master_rstdaa_locked(struct i3c_master_controller *master, + u8 addr) +{ + enum i3c_addr_slot_status addrstat; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + if (!master) + return -EINVAL; + + addrstat = i3c_bus_get_addr_slot_status(&master->bus, addr); + if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV) + return -EINVAL; + + i3c_ccc_cmd_dest_init(&dest, addr, 0); + i3c_ccc_cmd_init(&cmd, false, + I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR), + &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +/** + * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment) + * procedure + * @master: master used to send frames on the bus + * + * Send a ENTDAA CCC command to start a DAA procedure. + * + * Note that this function only sends the ENTDAA CCC command, all the logic + * behind dynamic address assignment has to be handled in the I3C master + * driver. + * + * This function must be called with the bus lock held in write mode. + * + * Return: 0 in case of success, a positive I3C error code if the error is + * one of the official Mx error codes, and a negative error code otherwise. + */ +int i3c_master_entdaa_locked(struct i3c_master_controller *master) +{ + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0); + i3c_ccc_cmd_init(&cmd, false, I3C_CCC_ENTDAA, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked); + +static int i3c_master_enec_disec_locked(struct i3c_master_controller *master, + u8 addr, bool enable, u8 evts) +{ + struct i3c_ccc_events *events; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + events = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*events)); + if (!events) + return -ENOMEM; + + events->events = evts; + i3c_ccc_cmd_init(&cmd, false, + enable ? + I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR) : + I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR), + &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +/** + * i3c_master_disec_locked() - send a DISEC CCC command + * @master: master used to send frames on the bus + * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR + * @evts: events to disable + * + * Send a DISEC CCC command to disable some or all events coming from a + * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. + * + * This function must be called with the bus lock held in write mode. + * + * Return: 0 in case of success, a positive I3C error code if the error is + * one of the official Mx error codes, and a negative error code otherwise. + */ +int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts) +{ + return i3c_master_enec_disec_locked(master, addr, false, evts); +} +EXPORT_SYMBOL_GPL(i3c_master_disec_locked); + +/** + * i3c_master_enec_locked() - send an ENEC CCC command + * @master: master used to send frames on the bus + * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR + * @evts: events to disable + * + * Sends an ENEC CCC command to enable some or all events coming from a + * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. + * + * This function must be called with the bus lock held in write mode. + * + * Return: 0 in case of success, a positive I3C error code if the error is + * one of the official Mx error codes, and a negative error code otherwise. + */ +int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts) +{ + return i3c_master_enec_disec_locked(master, addr, true, evts); +} +EXPORT_SYMBOL_GPL(i3c_master_enec_locked); + +/** + * i3c_master_defslvs_locked() - send a DEFSLVS CCC command + * @master: master used to send frames on the bus + * + * Send a DEFSLVS CCC command containing all the devices known to the @master. + * This is useful when you have secondary masters on the bus to propagate + * device information. + * + * This should be called after all I3C devices have been discovered (in other + * words, after the DAA procedure has finished) and instantiated in + * &i3c_master_controller_ops->bus_init(). + * It should also be called if a master ACKed an Hot-Join request and assigned + * a dynamic address to the device joining the bus. + * + * This function must be called with the bus lock held in write mode. + * + * Return: 0 in case of success, a positive I3C error code if the error is + * one of the official Mx error codes, and a negative error code otherwise. + */ +int i3c_master_defslvs_locked(struct i3c_master_controller *master) +{ + struct i3c_ccc_defslvs *defslvs; + struct i3c_ccc_dev_desc *desc; + struct i3c_ccc_cmd_dest dest; + struct i3c_dev_desc *i3cdev; + struct i2c_dev_desc *i2cdev; + struct i3c_ccc_cmd cmd; + struct i3c_bus *bus; + bool send = false; + int ndevs = 0, ret; + + if (!master) + return -EINVAL; + + bus = i3c_master_get_bus(master); + i3c_bus_for_each_i3cdev(bus, i3cdev) { + ndevs++; + + if (i3cdev == master->this) + continue; + + if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == + I3C_BCR_I3C_MASTER) + send = true; + } + + /* No other master on the bus, skip DEFSLVS. */ + if (!send) + return 0; + + i3c_bus_for_each_i2cdev(bus, i2cdev) + ndevs++; + + defslvs = i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, + sizeof(*defslvs) + + ((ndevs - 1) * + sizeof(struct i3c_ccc_dev_desc))); + if (!defslvs) + return -ENOMEM; + + defslvs->count = ndevs; + defslvs->master.bcr = master->this->info.bcr; + defslvs->master.dcr = master->this->info.dcr; + defslvs->master.dyn_addr = master->this->info.dyn_addr << 1; + defslvs->master.static_addr = I3C_BROADCAST_ADDR << 1; + + desc = defslvs->slaves; + i3c_bus_for_each_i2cdev(bus, i2cdev) { + desc->lvr = i2cdev->boardinfo->lvr; + desc->static_addr = i2cdev->boardinfo->base.addr << 1; + desc++; + } + + i3c_bus_for_each_i3cdev(bus, i3cdev) { + /* Skip the I3C dev representing this master. */ + if (i3cdev == master->this) + continue; + + desc->bcr = i3cdev->info.bcr; + desc->dcr = i3cdev->info.dcr; + desc->dyn_addr = i3cdev->info.dyn_addr << 1; + desc->static_addr = i3cdev->info.static_addr << 1; + desc++; + } + + i3c_ccc_cmd_init(&cmd, false, I3C_CCC_DEFSLVS, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked); + +static int i3c_master_setda_locked(struct i3c_master_controller *master, + u8 oldaddr, u8 newaddr, bool setdasa) +{ + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_setda *setda; + struct i3c_ccc_cmd cmd; + int ret; + + if (!oldaddr || !newaddr) + return -EINVAL; + + setda = i3c_ccc_cmd_dest_init(&dest, oldaddr, sizeof(*setda)); + if (!setda) + return -ENOMEM; + + setda->addr = newaddr << 1; + i3c_ccc_cmd_init(&cmd, false, + setdasa ? I3C_CCC_SETDASA : I3C_CCC_SETNEWDA, + &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_setdasa_locked(struct i3c_master_controller *master, + u8 static_addr, u8 dyn_addr) +{ + return i3c_master_setda_locked(master, static_addr, dyn_addr, true); +} + +static int i3c_master_setnewda_locked(struct i3c_master_controller *master, + u8 oldaddr, u8 newaddr) +{ + return i3c_master_setda_locked(master, oldaddr, newaddr, false); +} + +static int i3c_master_getmrl_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_cmd_dest dest; + unsigned int expected_len; + struct i3c_ccc_mrl *mrl; + struct i3c_ccc_cmd cmd; + int ret; + + mrl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mrl)); + if (!mrl) + return -ENOMEM; + + /* + * When the device does not have IBI payload GETMRL only returns 2 + * bytes of data. + */ + if (!(info->bcr & I3C_BCR_IBI_PAYLOAD)) + dest.payload.len -= 1; + + expected_len = dest.payload.len; + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + if (dest.payload.len != expected_len) { + ret = -EIO; + goto out; + } + + info->max_read_len = be16_to_cpu(mrl->read_len); + + if (info->bcr & I3C_BCR_IBI_PAYLOAD) + info->max_ibi_len = mrl->ibi_len; + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_getmwl_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_mwl *mwl; + struct i3c_ccc_cmd cmd; + int ret; + + mwl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mwl)); + if (!mwl) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMWL, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + if (dest.payload.len != sizeof(*mwl)) + return -EIO; + + info->max_write_len = be16_to_cpu(mwl->len); + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_getmxds_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_getmxds *getmaxds; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + getmaxds = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, + sizeof(*getmaxds)); + if (!getmaxds) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + if (dest.payload.len != 2 && dest.payload.len != 5) { + ret = -EIO; + goto out; + } + + info->max_read_ds = getmaxds->maxrd; + info->max_write_ds = getmaxds->maxwr; + if (dest.payload.len == 5) + info->max_read_turnaround = getmaxds->maxrdturn[0] | + ((u32)getmaxds->maxrdturn[1] << 8) | + ((u32)getmaxds->maxrdturn[2] << 16); + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_gethdrcap *gethdrcap; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + gethdrcap = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, + sizeof(*gethdrcap)); + if (!gethdrcap) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETHDRCAP, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + if (dest.payload.len != 1) { + ret = -EIO; + goto out; + } + + info->hdr_cap = gethdrcap->modes; + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_getpid_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_getpid *getpid; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret, i; + + getpid = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getpid)); + if (!getpid) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETPID, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + info->pid = 0; + for (i = 0; i < sizeof(getpid->pid); i++) { + int sft = (sizeof(getpid->pid) - i - 1) * 8; + + info->pid |= (u64)getpid->pid[i] << sft; + } + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_getbcr_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_getbcr *getbcr; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + getbcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getbcr)); + if (!getbcr) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETBCR, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + info->bcr = getbcr->bcr; + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_getdcr_locked(struct i3c_master_controller *master, + struct i3c_device_info *info) +{ + struct i3c_ccc_getdcr *getdcr; + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + getdcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getdcr)); + if (!getdcr) + return -ENOMEM; + + i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETDCR, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + if (ret) + goto out; + + info->dcr = getdcr->dcr; + +out: + i3c_ccc_cmd_dest_cleanup(&dest); + + return ret; +} + +static int i3c_master_retrieve_dev_info(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + enum i3c_addr_slot_status slot_status; + int ret; + + if (!dev->info.dyn_addr) + return -EINVAL; + + slot_status = i3c_bus_get_addr_slot_status(&master->bus, + dev->info.dyn_addr); + if (slot_status == I3C_ADDR_SLOT_RSVD || + slot_status == I3C_ADDR_SLOT_I2C_DEV) + return -EINVAL; + + ret = i3c_master_getpid_locked(master, &dev->info); + if (ret) + return ret; + + ret = i3c_master_getbcr_locked(master, &dev->info); + if (ret) + return ret; + + ret = i3c_master_getdcr_locked(master, &dev->info); + if (ret) + return ret; + + if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) { + ret = i3c_master_getmxds_locked(master, &dev->info); + if (ret) + return ret; + } + + if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD) + dev->info.max_ibi_len = 1; + + i3c_master_getmrl_locked(master, &dev->info); + i3c_master_getmwl_locked(master, &dev->info); + + if (dev->info.bcr & I3C_BCR_HDR_CAP) { + ret = i3c_master_gethdrcap_locked(master, &dev->info); + if (ret) + return ret; + } + + return 0; +} + +static void i3c_master_put_i3c_addrs(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + + if (dev->info.static_addr) + i3c_bus_set_addr_slot_status(&master->bus, + dev->info.static_addr, + I3C_ADDR_SLOT_FREE); + + if (dev->info.dyn_addr) + i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, + I3C_ADDR_SLOT_FREE); + + if (dev->boardinfo && dev->boardinfo->init_dyn_addr) + i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, + I3C_ADDR_SLOT_FREE); +} + +static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + enum i3c_addr_slot_status status; + + if (!dev->info.static_addr && !dev->info.dyn_addr) + return 0; + + if (dev->info.static_addr) { + status = i3c_bus_get_addr_slot_status(&master->bus, + dev->info.static_addr); + if (status != I3C_ADDR_SLOT_FREE) + return -EBUSY; + + i3c_bus_set_addr_slot_status(&master->bus, + dev->info.static_addr, + I3C_ADDR_SLOT_I3C_DEV); + } + + /* + * ->init_dyn_addr should have been reserved before that, so, if we're + * trying to apply a pre-reserved dynamic address, we should not try + * to reserve the address slot a second time. + */ + if (dev->info.dyn_addr && + (!dev->boardinfo || + dev->boardinfo->init_dyn_addr != dev->info.dyn_addr)) { + status = i3c_bus_get_addr_slot_status(&master->bus, + dev->info.dyn_addr); + if (status != I3C_ADDR_SLOT_FREE) + goto err_release_static_addr; + + i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, + I3C_ADDR_SLOT_I3C_DEV); + } + + return 0; + +err_release_static_addr: + if (dev->info.static_addr) + i3c_bus_set_addr_slot_status(&master->bus, + dev->info.static_addr, + I3C_ADDR_SLOT_FREE); + + return -EBUSY; +} + +static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master, + struct i3c_dev_desc *dev) +{ + int ret; + + /* + * We don't attach devices to the controller until they are + * addressable on the bus. + */ + if (!dev->info.static_addr && !dev->info.dyn_addr) + return 0; + + ret = i3c_master_get_i3c_addrs(dev); + if (ret) + return ret; + + /* Do not attach the master device itself. */ + if (master->this != dev && master->ops->attach_i3c_dev) { + ret = master->ops->attach_i3c_dev(dev); + if (ret) { + i3c_master_put_i3c_addrs(dev); + return ret; + } + } + + list_add_tail(&dev->common.node, &master->bus.devs.i3c); + + return 0; +} + +static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, + u8 old_dyn_addr) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + enum i3c_addr_slot_status status; + int ret; + + if (dev->info.dyn_addr != old_dyn_addr) { + status = i3c_bus_get_addr_slot_status(&master->bus, + dev->info.dyn_addr); + if (status != I3C_ADDR_SLOT_FREE) + return -EBUSY; + i3c_bus_set_addr_slot_status(&master->bus, + dev->info.dyn_addr, + I3C_ADDR_SLOT_I3C_DEV); + } + + if (master->ops->reattach_i3c_dev) { + ret = master->ops->reattach_i3c_dev(dev, old_dyn_addr); + if (ret) { + i3c_master_put_i3c_addrs(dev); + return ret; + } + } + + return 0; +} + +static void i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + + /* Do not detach the master device itself. */ + if (master->this != dev && master->ops->detach_i3c_dev) + master->ops->detach_i3c_dev(dev); + + i3c_master_put_i3c_addrs(dev); + list_del(&dev->common.node); +} + +static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master, + struct i2c_dev_desc *dev) +{ + int ret; + + if (master->ops->attach_i2c_dev) { + ret = master->ops->attach_i2c_dev(dev); + if (ret) + return ret; + } + + list_add_tail(&dev->common.node, &master->bus.devs.i2c); + + return 0; +} + +static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev) +{ + struct i3c_master_controller *master = i2c_dev_get_master(dev); + + list_del(&dev->common.node); + + if (master->ops->detach_i2c_dev) + master->ops->detach_i2c_dev(dev); +} + +static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + int ret; + + if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr || + !dev->boardinfo->static_addr) + return; + + ret = i3c_master_setdasa_locked(master, dev->info.static_addr, + dev->boardinfo->init_dyn_addr); + if (ret) + return; + + dev->info.dyn_addr = dev->boardinfo->init_dyn_addr; + ret = i3c_master_reattach_i3c_dev(dev, 0); + if (ret) + goto err_rstdaa; + + ret = i3c_master_retrieve_dev_info(dev); + if (ret) + goto err_rstdaa; + + return; + +err_rstdaa: + i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr); +} + +static void +i3c_master_register_new_i3c_devs(struct i3c_master_controller *master) +{ + struct i3c_dev_desc *desc; + int ret; + + if (!master->init_done) + return; + + i3c_bus_for_each_i3cdev(&master->bus, desc) { + if (desc->dev || !desc->info.dyn_addr || desc == master->this) + continue; + + desc->dev = kzalloc(sizeof(*desc->dev), GFP_KERNEL); + if (!desc->dev) + continue; + + desc->dev->bus = &master->bus; + desc->dev->desc = desc; + desc->dev->dev.parent = &master->dev; + desc->dev->dev.type = &i3c_device_type; + desc->dev->dev.bus = &i3c_bus_type; + desc->dev->dev.release = i3c_device_release; + dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id, + desc->info.pid); + + if (desc->boardinfo) + desc->dev->dev.of_node = desc->boardinfo->of_node; + + ret = device_register(&desc->dev->dev); + if (ret) + dev_err(&master->dev, + "Failed to add I3C device (err = %d)\n", ret); + } +} + +/** + * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment) + * @master: master doing the DAA + * + * This function is instantiating an I3C device object and adding it to the + * I3C device list. All device information are automatically retrieved using + * standard CCC commands. + * + * The I3C device object is returned in case the master wants to attach + * private data to it using i3c_dev_set_master_data(). + * + * This function must be called with the bus lock held in write mode. + * + * Return: a 0 in case of success, an negative error code otherwise. + */ +int i3c_master_do_daa(struct i3c_master_controller *master) +{ + int ret; + + i3c_bus_maintenance_lock(&master->bus); + ret = master->ops->do_daa(master); + i3c_bus_maintenance_unlock(&master->bus); + + if (ret) + return ret; + + i3c_bus_normaluse_lock(&master->bus); + i3c_master_register_new_i3c_devs(master); + i3c_bus_normaluse_unlock(&master->bus); + + return 0; +} +EXPORT_SYMBOL_GPL(i3c_master_do_daa); + +/** + * i3c_master_set_info() - set master device information + * @master: master used to send frames on the bus + * @info: I3C device information + * + * Set master device info. This should be called from + * &i3c_master_controller_ops->bus_init(). + * + * Not all &i3c_device_info fields are meaningful for a master device. + * Here is a list of fields that should be properly filled: + * + * - &i3c_device_info->dyn_addr + * - &i3c_device_info->bcr + * - &i3c_device_info->dcr + * - &i3c_device_info->pid + * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in + * &i3c_device_info->bcr + * + * This function must be called with the bus lock held in maintenance mode. + * + * Return: 0 if @info contains valid information (not every piece of + * information can be checked, but we can at least make sure @info->dyn_addr + * and @info->bcr are correct), -EINVAL otherwise. + */ +int i3c_master_set_info(struct i3c_master_controller *master, + const struct i3c_device_info *info) +{ + struct i3c_dev_desc *i3cdev; + int ret; + + if (!i3c_bus_dev_addr_is_avail(&master->bus, info->dyn_addr)) + return -EINVAL; + + if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER && + master->secondary) + return -EINVAL; + + if (master->this) + return -EINVAL; + + i3cdev = i3c_master_alloc_i3c_dev(master, info); + if (IS_ERR(i3cdev)) + return PTR_ERR(i3cdev); + + master->this = i3cdev; + master->bus.cur_master = master->this; + + ret = i3c_master_attach_i3c_dev(master, i3cdev); + if (ret) + goto err_free_dev; + + return 0; + +err_free_dev: + i3c_master_free_i3c_dev(i3cdev); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_master_set_info); + +static void i3c_master_detach_free_devs(struct i3c_master_controller *master) +{ + struct i3c_dev_desc *i3cdev, *i3ctmp; + struct i2c_dev_desc *i2cdev, *i2ctmp; + + list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c, + common.node) { + i3c_master_detach_i3c_dev(i3cdev); + + if (i3cdev->boardinfo && i3cdev->boardinfo->init_dyn_addr) + i3c_bus_set_addr_slot_status(&master->bus, + i3cdev->boardinfo->init_dyn_addr, + I3C_ADDR_SLOT_FREE); + + i3c_master_free_i3c_dev(i3cdev); + } + + list_for_each_entry_safe(i2cdev, i2ctmp, &master->bus.devs.i2c, + common.node) { + i3c_master_detach_i2c_dev(i2cdev); + i3c_bus_set_addr_slot_status(&master->bus, + i2cdev->boardinfo->base.addr, + I3C_ADDR_SLOT_FREE); + i3c_master_free_i2c_dev(i2cdev); + } +} + +/** + * i3c_master_bus_init() - initialize an I3C bus + * @master: main master initializing the bus + * + * This function is following all initialisation steps described in the I3C + * specification: + * + * 1. Attach I2C and statically defined I3C devs to the master so that the + * master can fill its internal device table appropriately + * + * 2. Call &i3c_master_controller_ops->bus_init() method to initialize + * the master controller. That's usually where the bus mode is selected + * (pure bus or mixed fast/slow bus) + * + * 3. Instruct all devices on the bus to drop their dynamic address. This is + * particularly important when the bus was previously configured by someone + * else (for example the bootloader) + * + * 4. Disable all slave events. + * + * 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C + * devices that have a static address + * + * 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all + * remaining I3C devices + * + * Once this is done, all I3C and I2C devices should be usable. + * + * Return: a 0 in case of success, an negative error code otherwise. + */ +static int i3c_master_bus_init(struct i3c_master_controller *master) +{ + enum i3c_addr_slot_status status; + struct i2c_dev_boardinfo *i2cboardinfo; + struct i3c_dev_boardinfo *i3cboardinfo; + struct i3c_dev_desc *i3cdev; + struct i2c_dev_desc *i2cdev; + int ret; + + /* + * First attach all devices with static definitions provided by the + * FW. + */ + list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) { + status = i3c_bus_get_addr_slot_status(&master->bus, + i2cboardinfo->base.addr); + if (status != I3C_ADDR_SLOT_FREE) { + ret = -EBUSY; + goto err_detach_devs; + } + + i3c_bus_set_addr_slot_status(&master->bus, + i2cboardinfo->base.addr, + I3C_ADDR_SLOT_I2C_DEV); + + i2cdev = i3c_master_alloc_i2c_dev(master, i2cboardinfo); + if (IS_ERR(i2cdev)) { + ret = PTR_ERR(i2cdev); + goto err_detach_devs; + } + + ret = i3c_master_attach_i2c_dev(master, i2cdev); + if (ret) { + i3c_master_free_i2c_dev(i2cdev); + goto err_detach_devs; + } + } + list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) { + struct i3c_device_info info = { + .static_addr = i3cboardinfo->static_addr, + }; + + if (i3cboardinfo->init_dyn_addr) { + status = i3c_bus_get_addr_slot_status(&master->bus, + i3cboardinfo->init_dyn_addr); + if (status != I3C_ADDR_SLOT_FREE) { + ret = -EBUSY; + goto err_detach_devs; + } + } + + i3cdev = i3c_master_alloc_i3c_dev(master, &info); + if (IS_ERR(i3cdev)) { + ret = PTR_ERR(i3cdev); + goto err_detach_devs; + } + + i3cdev->boardinfo = i3cboardinfo; + + ret = i3c_master_attach_i3c_dev(master, i3cdev); + if (ret) { + i3c_master_free_i3c_dev(i3cdev); + goto err_detach_devs; + } + } + + /* + * Now execute the controller specific ->bus_init() routine, which + * might configure its internal logic to match the bus limitations. + */ + ret = master->ops->bus_init(master); + if (ret) + goto err_detach_devs; + + /* + * The master device should have been instantiated in ->bus_init(), + * complain if this was not the case. + */ + if (!master->this) { + dev_err(&master->dev, + "master_set_info() was not called in ->bus_init()\n"); + ret = -EINVAL; + goto err_bus_cleanup; + } + + /* + * Reset all dynamic address that may have been assigned before + * (assigned by the bootloader for example). + */ + ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); + if (ret && ret != I3C_ERROR_M2) + goto err_bus_cleanup; + + /* Disable all slave events before starting DAA. */ + ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR, + I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR | + I3C_CCC_EVENT_HJ); + if (ret && ret != I3C_ERROR_M2) + goto err_bus_cleanup; + + /* + * Pre-assign dynamic address and retrieve device information if + * needed. + */ + i3c_bus_for_each_i3cdev(&master->bus, i3cdev) + i3c_master_pre_assign_dyn_addr(i3cdev); + + ret = i3c_master_do_daa(master); + if (ret) + goto err_rstdaa; + + return 0; + +err_rstdaa: + i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); + +err_bus_cleanup: + if (master->ops->bus_cleanup) + master->ops->bus_cleanup(master); + +err_detach_devs: + i3c_master_detach_free_devs(master); + + return ret; +} + +static void i3c_master_bus_cleanup(struct i3c_master_controller *master) +{ + if (master->ops->bus_cleanup) + master->ops->bus_cleanup(master); + + i3c_master_detach_free_devs(master); +} + +static struct i3c_dev_desc * +i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev) +{ + struct i3c_master_controller *master = refdev->common.master; + struct i3c_dev_desc *i3cdev; + + i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { + if (i3cdev != refdev && i3cdev->info.pid == refdev->info.pid) + return i3cdev; + } + + return NULL; +} + +/** + * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus + * @master: master used to send frames on the bus + * @addr: I3C slave dynamic address assigned to the device + * + * This function is instantiating an I3C device object and adding it to the + * I3C device list. All device information are automatically retrieved using + * standard CCC commands. + * + * The I3C device object is returned in case the master wants to attach + * private data to it using i3c_dev_set_master_data(). + * + * This function must be called with the bus lock held in write mode. + * + * Return: a 0 in case of success, an negative error code otherwise. + */ +int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, + u8 addr) +{ + struct i3c_device_info info = { .dyn_addr = addr }; + struct i3c_dev_desc *newdev, *olddev; + u8 old_dyn_addr = addr, expected_dyn_addr; + struct i3c_ibi_setup ibireq = { }; + bool enable_ibi = false; + int ret; + + if (!master) + return -EINVAL; + + newdev = i3c_master_alloc_i3c_dev(master, &info); + if (IS_ERR(newdev)) + return PTR_ERR(newdev); + + ret = i3c_master_attach_i3c_dev(master, newdev); + if (ret) + goto err_free_dev; + + ret = i3c_master_retrieve_dev_info(newdev); + if (ret) + goto err_free_dev; + + olddev = i3c_master_search_i3c_dev_duplicate(newdev); + if (olddev) { + newdev->boardinfo = olddev->boardinfo; + newdev->info.static_addr = olddev->info.static_addr; + newdev->dev = olddev->dev; + if (newdev->dev) + newdev->dev->desc = newdev; + + /* + * We need to restore the IBI state too, so let's save the + * IBI information and try to restore them after olddev has + * been detached+released and its IBI has been stopped and + * the associated resources have been freed. + */ + mutex_lock(&olddev->ibi_lock); + if (olddev->ibi) { + ibireq.handler = olddev->ibi->handler; + ibireq.max_payload_len = olddev->ibi->max_payload_len; + ibireq.num_slots = olddev->ibi->num_slots; + + if (olddev->ibi->enabled) { + enable_ibi = true; + i3c_dev_disable_ibi_locked(olddev); + } + + i3c_dev_free_ibi_locked(olddev); + } + mutex_unlock(&olddev->ibi_lock); + + old_dyn_addr = olddev->info.dyn_addr; + + i3c_master_detach_i3c_dev(olddev); + i3c_master_free_i3c_dev(olddev); + } + + ret = i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); + if (ret) + goto err_detach_dev; + + /* + * Depending on our previous state, the expected dynamic address might + * differ: + * - if the device already had a dynamic address assigned, let's try to + * re-apply this one + * - if the device did not have a dynamic address and the firmware + * requested a specific address, pick this one + * - in any other case, keep the address automatically assigned by the + * master + */ + if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr) + expected_dyn_addr = old_dyn_addr; + else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr) + expected_dyn_addr = newdev->boardinfo->init_dyn_addr; + else + expected_dyn_addr = newdev->info.dyn_addr; + + if (newdev->info.dyn_addr != expected_dyn_addr) { + /* + * Try to apply the expected dynamic address. If it fails, keep + * the address assigned by the master. + */ + ret = i3c_master_setnewda_locked(master, + newdev->info.dyn_addr, + expected_dyn_addr); + if (!ret) { + old_dyn_addr = newdev->info.dyn_addr; + newdev->info.dyn_addr = expected_dyn_addr; + i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); + } else { + dev_err(&master->dev, + "Failed to assign reserved/old address to device %d%llx", + master->bus.id, newdev->info.pid); + } + } + + /* + * Now is time to try to restore the IBI setup. If we're lucky, + * everything works as before, otherwise, all we can do is complain. + * FIXME: maybe we should add callback to inform the driver that it + * should request the IBI again instead of trying to hide that from + * him. + */ + if (ibireq.handler) { + mutex_lock(&newdev->ibi_lock); + ret = i3c_dev_request_ibi_locked(newdev, &ibireq); + if (ret) { + dev_err(&master->dev, + "Failed to request IBI on device %d-%llx", + master->bus.id, newdev->info.pid); + } else if (enable_ibi) { + ret = i3c_dev_enable_ibi_locked(newdev); + if (ret) + dev_err(&master->dev, + "Failed to re-enable IBI on device %d-%llx", + master->bus.id, newdev->info.pid); + } + mutex_unlock(&newdev->ibi_lock); + } + + return 0; + +err_detach_dev: + if (newdev->dev && newdev->dev->desc) + newdev->dev->desc = NULL; + + i3c_master_detach_i3c_dev(newdev); + +err_free_dev: + i3c_master_free_i3c_dev(newdev); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked); + +#define OF_I3C_REG1_IS_I2C_DEV BIT(31) + +static int +of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, + struct device_node *node, u32 *reg) +{ + struct i2c_dev_boardinfo *boardinfo; + struct device *dev = &master->dev; + int ret; + + boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); + if (!boardinfo) + return -ENOMEM; + + ret = of_i2c_get_board_info(dev, node, &boardinfo->base); + if (ret) + return ret; + + /* LVR is encoded in reg[2]. */ + boardinfo->lvr = reg[2]; + + if (boardinfo->lvr & I3C_LVR_I2C_FM_MODE) + master->bus.scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE; + + list_add_tail(&boardinfo->node, &master->boardinfo.i2c); + of_node_get(node); + + return 0; +} + +static int +of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, + struct device_node *node, u32 *reg) +{ + struct i3c_dev_boardinfo *boardinfo; + struct device *dev = &master->dev; + struct i3c_device_info info = { }; + enum i3c_addr_slot_status addrstatus; + u32 init_dyn_addr = 0; + + boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); + if (!boardinfo) + return -ENOMEM; + + if (reg[0]) { + if (reg[0] > I3C_MAX_ADDR) + return -EINVAL; + + addrstatus = i3c_bus_get_addr_slot_status(&master->bus, + reg[0]); + if (addrstatus != I3C_ADDR_SLOT_FREE) + return -EINVAL; + } + + boardinfo->static_addr = reg[0]; + + if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) { + if (init_dyn_addr > I3C_MAX_ADDR) + return -EINVAL; + + addrstatus = i3c_bus_get_addr_slot_status(&master->bus, + init_dyn_addr); + if (addrstatus != I3C_ADDR_SLOT_FREE) + return -EINVAL; + } + + boardinfo->pid = ((u64)reg[1] << 32) | reg[2]; + + if ((info.pid & GENMASK_ULL(63, 48)) || + I3C_PID_RND_LOWER_32BITS(info.pid)) + return -EINVAL; + + boardinfo->init_dyn_addr = init_dyn_addr; + boardinfo->of_node = of_node_get(node); + list_add_tail(&boardinfo->node, &master->boardinfo.i3c); + + return 0; +} + +static int of_i3c_master_add_dev(struct i3c_master_controller *master, + struct device_node *node) +{ + u32 reg[3]; + int ret; + + if (!master || !node) + return -EINVAL; + + ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg)); + if (ret) + return ret; + + /* + * The manufacturer ID can't be 0. If reg[1] == 0 that means we're + * dealing with an I2C device. + */ + if (!reg[1]) + ret = of_i3c_master_add_i2c_boardinfo(master, node, reg); + else + ret = of_i3c_master_add_i3c_boardinfo(master, node, reg); + + return ret; +} + +static int of_populate_i3c_bus(struct i3c_master_controller *master) +{ + struct device *dev = &master->dev; + struct device_node *i3cbus_np = dev->of_node; + struct device_node *node; + int ret; + u32 val; + + if (!i3cbus_np) + return 0; + + for_each_available_child_of_node(i3cbus_np, node) { + ret = of_i3c_master_add_dev(master, node); + if (ret) + return ret; + } + + /* + * The user might want to limit I2C and I3C speed in case some devices + * on the bus are not supporting typical rates, or if the bus topology + * prevents it from using max possible rate. + */ + if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val)) + master->bus.scl_rate.i2c = val; + + if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val)) + master->bus.scl_rate.i3c = val; + + return 0; +} + +static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap, + struct i2c_msg *xfers, int nxfers) +{ + struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap); + struct i2c_dev_desc *dev; + int i, ret; + u16 addr; + + if (!xfers || !master || nxfers <= 0) + return -EINVAL; + + if (!master->ops->i2c_xfers) + return -ENOTSUPP; + + /* Doing transfers to different devices is not supported. */ + addr = xfers[0].addr; + for (i = 1; i < nxfers; i++) { + if (addr != xfers[i].addr) + return -ENOTSUPP; + } + + i3c_bus_normaluse_lock(&master->bus); + dev = i3c_master_find_i2c_dev_by_addr(master, addr); + if (!dev) + ret = -ENOENT; + else + ret = master->ops->i2c_xfers(dev, xfers, nxfers); + i3c_bus_normaluse_unlock(&master->bus); + + return ret ? ret : nxfers; +} + +static u32 i3c_master_i2c_functionalities(struct i2c_adapter *adap) +{ + struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap); + + return master->ops->i2c_funcs(master); +} + +static const struct i2c_algorithm i3c_master_i2c_algo = { + .master_xfer = i3c_master_i2c_adapter_xfer, + .functionality = i3c_master_i2c_functionalities, +}; + +static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master) +{ + struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master); + struct i2c_dev_desc *i2cdev; + int ret; + + adap->dev.parent = master->dev.parent; + adap->owner = master->dev.parent->driver->owner; + adap->algo = &i3c_master_i2c_algo; + strncpy(adap->name, dev_name(master->dev.parent), sizeof(adap->name)); + + /* FIXME: Should we allow i3c masters to override these values? */ + adap->timeout = 1000; + adap->retries = 3; + + ret = i2c_add_adapter(adap); + if (ret) + return ret; + + /* + * We silently ignore failures here. The bus should keep working + * correctly even if one or more i2c devices are not registered. + */ + i3c_bus_for_each_i2cdev(&master->bus, i2cdev) + i2cdev->dev = i2c_new_device(adap, &i2cdev->boardinfo->base); + + return 0; +} + +static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master) +{ + struct i2c_dev_desc *i2cdev; + + i2c_del_adapter(&master->i2c); + + i3c_bus_for_each_i2cdev(&master->bus, i2cdev) + i2cdev->dev = NULL; +} + +static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master) +{ + struct i3c_dev_desc *i3cdev; + + i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { + if (!i3cdev->dev) + continue; + + i3cdev->dev->desc = NULL; + if (device_is_registered(&i3cdev->dev->dev)) + device_unregister(&i3cdev->dev->dev); + else + put_device(&i3cdev->dev->dev); + i3cdev->dev = NULL; + } +} + +/** + * i3c_master_queue_ibi() - Queue an IBI + * @dev: the device this IBI is coming from + * @slot: the IBI slot used to store the payload + * + * Queue an IBI to the controller workqueue. The IBI handler attached to + * the dev will be called from a workqueue context. + */ +void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot) +{ + atomic_inc(&dev->ibi->pending_ibis); + queue_work(dev->common.master->wq, &slot->work); +} +EXPORT_SYMBOL_GPL(i3c_master_queue_ibi); + +static void i3c_master_handle_ibi(struct work_struct *work) +{ + struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot, + work); + struct i3c_dev_desc *dev = slot->dev; + struct i3c_master_controller *master = i3c_dev_get_master(dev); + struct i3c_ibi_payload payload; + + payload.data = slot->data; + payload.len = slot->len; + + if (dev->dev) + dev->ibi->handler(dev->dev, &payload); + + master->ops->recycle_ibi_slot(dev, slot); + if (atomic_dec_and_test(&dev->ibi->pending_ibis)) + complete(&dev->ibi->all_ibis_handled); +} + +static void i3c_master_init_ibi_slot(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot) +{ + slot->dev = dev; + INIT_WORK(&slot->work, i3c_master_handle_ibi); +} + +struct i3c_generic_ibi_slot { + struct list_head node; + struct i3c_ibi_slot base; +}; + +struct i3c_generic_ibi_pool { + spinlock_t lock; + unsigned int num_slots; + struct i3c_generic_ibi_slot *slots; + void *payload_buf; + struct list_head free_slots; + struct list_head pending; +}; + +/** + * i3c_generic_ibi_free_pool() - Free a generic IBI pool + * @pool: the IBI pool to free + * + * Free all IBI slots allated by a generic IBI pool. + */ +void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool) +{ + struct i3c_generic_ibi_slot *slot; + unsigned int nslots = 0; + + while (!list_empty(&pool->free_slots)) { + slot = list_first_entry(&pool->free_slots, + struct i3c_generic_ibi_slot, node); + list_del(&slot->node); + nslots++; + } + + /* + * If the number of freed slots is not equal to the number of allocated + * slots we have a leak somewhere. + */ + WARN_ON(nslots != pool->num_slots); + + kfree(pool->payload_buf); + kfree(pool->slots); + kfree(pool); +} +EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool); + +/** + * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool + * @dev: the device this pool will be used for + * @req: IBI setup request describing what the device driver expects + * + * Create a generic IBI pool based on the information provided in @req. + * + * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise. + */ +struct i3c_generic_ibi_pool * +i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req) +{ + struct i3c_generic_ibi_pool *pool; + struct i3c_generic_ibi_slot *slot; + unsigned int i; + int ret; + + pool = kzalloc(sizeof(*pool), GFP_KERNEL); + if (!pool) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&pool->lock); + INIT_LIST_HEAD(&pool->free_slots); + INIT_LIST_HEAD(&pool->pending); + + pool->slots = kcalloc(req->num_slots, sizeof(*slot), GFP_KERNEL); + if (!pool->slots) { + ret = -ENOMEM; + goto err_free_pool; + } + + if (req->max_payload_len) { + pool->payload_buf = kcalloc(req->num_slots, + req->max_payload_len, GFP_KERNEL); + if (!pool->payload_buf) { + ret = -ENOMEM; + goto err_free_pool; + } + } + + for (i = 0; i < req->num_slots; i++) { + slot = &pool->slots[i]; + i3c_master_init_ibi_slot(dev, &slot->base); + + if (req->max_payload_len) + slot->base.data = pool->payload_buf + + (i * req->max_payload_len); + + list_add_tail(&slot->node, &pool->free_slots); + pool->num_slots++; + } + + return pool; + +err_free_pool: + i3c_generic_ibi_free_pool(pool); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool); + +/** + * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool + * @pool: the pool to query an IBI slot on + * + * Search for a free slot in a generic IBI pool. + * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot() + * when it's no longer needed. + * + * Return: a pointer to a free slot, or NULL if there's no free slot available. + */ +struct i3c_ibi_slot * +i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool) +{ + struct i3c_generic_ibi_slot *slot; + unsigned long flags; + + spin_lock_irqsave(&pool->lock, flags); + slot = list_first_entry_or_null(&pool->free_slots, + struct i3c_generic_ibi_slot, node); + if (slot) + list_del(&slot->node); + spin_unlock_irqrestore(&pool->lock, flags); + + return slot ? &slot->base : NULL; +} +EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot); + +/** + * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool + * @pool: the pool to return the IBI slot to + * @s: IBI slot to recycle + * + * Add an IBI slot back to its generic IBI pool. Should be called from the + * master driver struct_master_controller_ops->recycle_ibi() method. + */ +void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, + struct i3c_ibi_slot *s) +{ + struct i3c_generic_ibi_slot *slot; + unsigned long flags; + + if (!s) + return; + + slot = container_of(s, struct i3c_generic_ibi_slot, base); + spin_lock_irqsave(&pool->lock, flags); + list_add_tail(&slot->node, &pool->free_slots); + spin_unlock_irqrestore(&pool->lock, flags); +} +EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot); + +static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops) +{ + if (!ops || !ops->bus_init || !ops->priv_xfers || + !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers || + !ops->i2c_funcs) + return -EINVAL; + + if (ops->request_ibi && + (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi || + !ops->recycle_ibi_slot)) + return -EINVAL; + + return 0; +} + +/** + * i3c_master_register() - register an I3C master + * @master: master used to send frames on the bus + * @parent: the parent device (the one that provides this I3C master + * controller) + * @ops: the master controller operations + * @secondary: true if you are registering a secondary master. Will return + * -ENOTSUPP if set to true since secondary masters are not yet + * supported + * + * This function takes care of everything for you: + * + * - creates and initializes the I3C bus + * - populates the bus with static I2C devs if @parent->of_node is not + * NULL + * - registers all I3C devices added by the controller during bus + * initialization + * - registers the I2C adapter and all I2C devices + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int i3c_master_register(struct i3c_master_controller *master, + struct device *parent, + const struct i3c_master_controller_ops *ops, + bool secondary) +{ + struct i3c_bus *i3cbus = i3c_master_get_bus(master); + enum i3c_bus_mode mode = I3C_BUS_MODE_PURE; + struct i2c_dev_boardinfo *i2cbi; + int ret; + + /* We do not support secondary masters yet. */ + if (secondary) + return -ENOTSUPP; + + ret = i3c_master_check_ops(ops); + if (ret) + return ret; + + master->dev.parent = parent; + master->dev.of_node = of_node_get(parent->of_node); + master->dev.bus = &i3c_bus_type; + master->dev.type = &i3c_masterdev_type; + master->dev.release = i3c_masterdev_release; + master->ops = ops; + master->secondary = secondary; + INIT_LIST_HEAD(&master->boardinfo.i2c); + INIT_LIST_HEAD(&master->boardinfo.i3c); + + ret = i3c_bus_init(i3cbus); + if (ret) + return ret; + + device_initialize(&master->dev); + dev_set_name(&master->dev, "i3c-%d", i3cbus->id); + + ret = of_populate_i3c_bus(master); + if (ret) + goto err_put_dev; + + list_for_each_entry(i2cbi, &master->boardinfo.i2c, node) { + switch (i2cbi->lvr & I3C_LVR_I2C_INDEX_MASK) { + case I3C_LVR_I2C_INDEX(0): + if (mode < I3C_BUS_MODE_MIXED_FAST) + mode = I3C_BUS_MODE_MIXED_FAST; + break; + case I3C_LVR_I2C_INDEX(1): + case I3C_LVR_I2C_INDEX(2): + if (mode < I3C_BUS_MODE_MIXED_SLOW) + mode = I3C_BUS_MODE_MIXED_SLOW; + break; + default: + ret = -EINVAL; + goto err_put_dev; + } + } + + ret = i3c_bus_set_mode(i3cbus, mode); + if (ret) + goto err_put_dev; + + master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent)); + if (!master->wq) { + ret = -ENOMEM; + goto err_put_dev; + } + + ret = i3c_master_bus_init(master); + if (ret) + goto err_put_dev; + + ret = device_add(&master->dev); + if (ret) + goto err_cleanup_bus; + + /* + * Expose our I3C bus as an I2C adapter so that I2C devices are exposed + * through the I2C subsystem. + */ + ret = i3c_master_i2c_adapter_init(master); + if (ret) + goto err_del_dev; + + /* + * We're done initializing the bus and the controller, we can now + * register I3C devices dicovered during the initial DAA. + */ + master->init_done = true; + i3c_bus_normaluse_lock(&master->bus); + i3c_master_register_new_i3c_devs(master); + i3c_bus_normaluse_unlock(&master->bus); + + return 0; + +err_del_dev: + device_del(&master->dev); + +err_cleanup_bus: + i3c_master_bus_cleanup(master); + +err_put_dev: + put_device(&master->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(i3c_master_register); + +/** + * i3c_master_unregister() - unregister an I3C master + * @master: master used to send frames on the bus + * + * Basically undo everything done in i3c_master_register(). + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int i3c_master_unregister(struct i3c_master_controller *master) +{ + i3c_master_i2c_adapter_cleanup(master); + i3c_master_unregister_i3c_devs(master); + i3c_master_bus_cleanup(master); + device_unregister(&master->dev); + + return 0; +} +EXPORT_SYMBOL_GPL(i3c_master_unregister); + +int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers) +{ + struct i3c_master_controller *master; + + if (!dev) + return -ENOENT; + + master = i3c_dev_get_master(dev); + if (!master || !xfers) + return -EINVAL; + + if (!master->ops->priv_xfers) + return -ENOTSUPP; + + return master->ops->priv_xfers(dev, xfers, nxfers); +} + +int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master; + int ret; + + if (!dev->ibi) + return -EINVAL; + + master = i3c_dev_get_master(dev); + ret = master->ops->disable_ibi(dev); + if (ret) + return ret; + + reinit_completion(&dev->ibi->all_ibis_handled); + if (atomic_read(&dev->ibi->pending_ibis)) + wait_for_completion(&dev->ibi->all_ibis_handled); + + dev->ibi->enabled = false; + + return 0; +} + +int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + int ret; + + if (!dev->ibi) + return -EINVAL; + + ret = master->ops->enable_ibi(dev); + if (!ret) + dev->ibi->enabled = true; + + return ret; +} + +int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + struct i3c_device_ibi_info *ibi; + int ret; + + if (!master->ops->request_ibi) + return -ENOTSUPP; + + if (dev->ibi) + return -EBUSY; + + ibi = kzalloc(sizeof(*ibi), GFP_KERNEL); + if (!ibi) + return -ENOMEM; + + atomic_set(&ibi->pending_ibis, 0); + init_completion(&ibi->all_ibis_handled); + ibi->handler = req->handler; + ibi->max_payload_len = req->max_payload_len; + ibi->num_slots = req->num_slots; + + dev->ibi = ibi; + ret = master->ops->request_ibi(dev, req); + if (ret) { + kfree(ibi); + dev->ibi = NULL; + } + + return ret; +} + +void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *master = i3c_dev_get_master(dev); + + if (!dev->ibi) + return; + + if (WARN_ON(dev->ibi->enabled)) + WARN_ON(i3c_dev_disable_ibi_locked(dev)); + + master->ops->free_ibi(dev); + kfree(dev->ibi); + dev->ibi = NULL; +} + +static int __init i3c_init(void) +{ + return bus_register(&i3c_bus_type); +} +subsys_initcall(i3c_init); + +static void __exit i3c_exit(void) +{ + idr_destroy(&i3c_bus_idr); + bus_unregister(&i3c_bus_type); +} +module_exit(i3c_exit); + +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>"); +MODULE_DESCRIPTION("I3C core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig new file mode 100644 index 000000000000..26c6b585894e --- /dev/null +++ b/drivers/i3c/master/Kconfig @@ -0,0 +1,22 @@ +config CDNS_I3C_MASTER + tristate "Cadence I3C master driver" + depends on I3C + depends on HAS_IOMEM + depends on !(ALPHA || PARISC) + help + Enable this driver if you want to support Cadence I3C master block. + +config DW_I3C_MASTER + tristate "Synospsys DesignWare I3C master driver" + depends on I3C + depends on HAS_IOMEM + depends on !(ALPHA || PARISC) + # ALPHA and PARISC needs {read,write}sl() + help + Support for Synopsys DesignWare MIPI I3C Controller. + + For details please see + https://www.synopsys.com/dw/ipdir.php?ds=mipi_i3c + + This driver can also be built as a module. If so, the module + will be called dw-i3c-master. diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile new file mode 100644 index 000000000000..fc53939a0bb1 --- /dev/null +++ b/drivers/i3c/master/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_CDNS_I3C_MASTER) += i3c-master-cdns.o +obj-$(CONFIG_DW_I3C_MASTER) += dw-i3c-master.o diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c new file mode 100644 index 000000000000..b532e2c9cf5c --- /dev/null +++ b/drivers/i3c/master/dw-i3c-master.c @@ -0,0 +1,1216 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. + * + * Author: Vitor Soares <vitor.soares@synopsys.com> + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/i3c/master.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/iopoll.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#define DEVICE_CTRL 0x0 +#define DEV_CTRL_ENABLE BIT(31) +#define DEV_CTRL_RESUME BIT(30) +#define DEV_CTRL_HOT_JOIN_NACK BIT(8) +#define DEV_CTRL_I2C_SLAVE_PRESENT BIT(7) + +#define DEVICE_ADDR 0x4 +#define DEV_ADDR_DYNAMIC_ADDR_VALID BIT(31) +#define DEV_ADDR_DYNAMIC(x) (((x) << 16) & GENMASK(22, 16)) + +#define HW_CAPABILITY 0x8 +#define COMMAND_QUEUE_PORT 0xc +#define COMMAND_PORT_TOC BIT(30) +#define COMMAND_PORT_READ_TRANSFER BIT(28) +#define COMMAND_PORT_SDAP BIT(27) +#define COMMAND_PORT_ROC BIT(26) +#define COMMAND_PORT_SPEED(x) (((x) << 21) & GENMASK(23, 21)) +#define COMMAND_PORT_DEV_INDEX(x) (((x) << 16) & GENMASK(20, 16)) +#define COMMAND_PORT_CP BIT(15) +#define COMMAND_PORT_CMD(x) (((x) << 7) & GENMASK(14, 7)) +#define COMMAND_PORT_TID(x) (((x) << 3) & GENMASK(6, 3)) + +#define COMMAND_PORT_ARG_DATA_LEN(x) (((x) << 16) & GENMASK(31, 16)) +#define COMMAND_PORT_ARG_DATA_LEN_MAX 65536 +#define COMMAND_PORT_TRANSFER_ARG 0x01 + +#define COMMAND_PORT_SDA_DATA_BYTE_3(x) (((x) << 24) & GENMASK(31, 24)) +#define COMMAND_PORT_SDA_DATA_BYTE_2(x) (((x) << 16) & GENMASK(23, 16)) +#define COMMAND_PORT_SDA_DATA_BYTE_1(x) (((x) << 8) & GENMASK(15, 8)) +#define COMMAND_PORT_SDA_BYTE_STRB_3 BIT(5) +#define COMMAND_PORT_SDA_BYTE_STRB_2 BIT(4) +#define COMMAND_PORT_SDA_BYTE_STRB_1 BIT(3) +#define COMMAND_PORT_SHORT_DATA_ARG 0x02 + +#define COMMAND_PORT_DEV_COUNT(x) (((x) << 21) & GENMASK(25, 21)) +#define COMMAND_PORT_ADDR_ASSGN_CMD 0x03 + +#define RESPONSE_QUEUE_PORT 0x10 +#define RESPONSE_PORT_ERR_STATUS(x) (((x) & GENMASK(31, 28)) >> 28) +#define RESPONSE_NO_ERROR 0 +#define RESPONSE_ERROR_CRC 1 +#define RESPONSE_ERROR_PARITY 2 +#define RESPONSE_ERROR_FRAME 3 +#define RESPONSE_ERROR_IBA_NACK 4 +#define RESPONSE_ERROR_ADDRESS_NACK 5 +#define RESPONSE_ERROR_OVER_UNDER_FLOW 6 +#define RESPONSE_ERROR_TRANSF_ABORT 8 +#define RESPONSE_ERROR_I2C_W_NACK_ERR 9 +#define RESPONSE_PORT_TID(x) (((x) & GENMASK(27, 24)) >> 24) +#define RESPONSE_PORT_DATA_LEN(x) ((x) & GENMASK(15, 0)) + +#define RX_TX_DATA_PORT 0x14 +#define IBI_QUEUE_STATUS 0x18 +#define QUEUE_THLD_CTRL 0x1c +#define QUEUE_THLD_CTRL_RESP_BUF_MASK GENMASK(15, 8) +#define QUEUE_THLD_CTRL_RESP_BUF(x) (((x) - 1) << 8) + +#define DATA_BUFFER_THLD_CTRL 0x20 +#define DATA_BUFFER_THLD_CTRL_RX_BUF GENMASK(11, 8) + +#define IBI_QUEUE_CTRL 0x24 +#define IBI_MR_REQ_REJECT 0x2C +#define IBI_SIR_REQ_REJECT 0x30 +#define IBI_REQ_REJECT_ALL GENMASK(31, 0) + +#define RESET_CTRL 0x34 +#define RESET_CTRL_IBI_QUEUE BIT(5) +#define RESET_CTRL_RX_FIFO BIT(4) +#define RESET_CTRL_TX_FIFO BIT(3) +#define RESET_CTRL_RESP_QUEUE BIT(2) +#define RESET_CTRL_CMD_QUEUE BIT(1) +#define RESET_CTRL_SOFT BIT(0) + +#define SLV_EVENT_CTRL 0x38 +#define INTR_STATUS 0x3c +#define INTR_STATUS_EN 0x40 +#define INTR_SIGNAL_EN 0x44 +#define INTR_FORCE 0x48 +#define INTR_BUSOWNER_UPDATE_STAT BIT(13) +#define INTR_IBI_UPDATED_STAT BIT(12) +#define INTR_READ_REQ_RECV_STAT BIT(11) +#define INTR_DEFSLV_STAT BIT(10) +#define INTR_TRANSFER_ERR_STAT BIT(9) +#define INTR_DYN_ADDR_ASSGN_STAT BIT(8) +#define INTR_CCC_UPDATED_STAT BIT(6) +#define INTR_TRANSFER_ABORT_STAT BIT(5) +#define INTR_RESP_READY_STAT BIT(4) +#define INTR_CMD_QUEUE_READY_STAT BIT(3) +#define INTR_IBI_THLD_STAT BIT(2) +#define INTR_RX_THLD_STAT BIT(1) +#define INTR_TX_THLD_STAT BIT(0) +#define INTR_ALL (INTR_BUSOWNER_UPDATE_STAT | \ + INTR_IBI_UPDATED_STAT | \ + INTR_READ_REQ_RECV_STAT | \ + INTR_DEFSLV_STAT | \ + INTR_TRANSFER_ERR_STAT | \ + INTR_DYN_ADDR_ASSGN_STAT | \ + INTR_CCC_UPDATED_STAT | \ + INTR_TRANSFER_ABORT_STAT | \ + INTR_RESP_READY_STAT | \ + INTR_CMD_QUEUE_READY_STAT | \ + INTR_IBI_THLD_STAT | \ + INTR_TX_THLD_STAT | \ + INTR_RX_THLD_STAT) + +#define INTR_MASTER_MASK (INTR_TRANSFER_ERR_STAT | \ + INTR_RESP_READY_STAT) + +#define QUEUE_STATUS_LEVEL 0x4c +#define QUEUE_STATUS_IBI_STATUS_CNT(x) (((x) & GENMASK(28, 24)) >> 24) +#define QUEUE_STATUS_IBI_BUF_BLR(x) (((x) & GENMASK(23, 16)) >> 16) +#define QUEUE_STATUS_LEVEL_RESP(x) (((x) & GENMASK(15, 8)) >> 8) +#define QUEUE_STATUS_LEVEL_CMD(x) ((x) & GENMASK(7, 0)) + +#define DATA_BUFFER_STATUS_LEVEL 0x50 +#define DATA_BUFFER_STATUS_LEVEL_TX(x) ((x) & GENMASK(7, 0)) + +#define PRESENT_STATE 0x54 +#define CCC_DEVICE_STATUS 0x58 +#define DEVICE_ADDR_TABLE_POINTER 0x5c +#define DEVICE_ADDR_TABLE_DEPTH(x) (((x) & GENMASK(31, 16)) >> 16) +#define DEVICE_ADDR_TABLE_ADDR(x) ((x) & GENMASK(7, 0)) + +#define DEV_CHAR_TABLE_POINTER 0x60 +#define VENDOR_SPECIFIC_REG_POINTER 0x6c +#define SLV_PID_VALUE 0x74 +#define SLV_CHAR_CTRL 0x78 +#define SLV_MAX_LEN 0x7c +#define MAX_READ_TURNAROUND 0x80 +#define MAX_DATA_SPEED 0x84 +#define SLV_DEBUG_STATUS 0x88 +#define SLV_INTR_REQ 0x8c +#define DEVICE_CTRL_EXTENDED 0xb0 +#define SCL_I3C_OD_TIMING 0xb4 +#define SCL_I3C_PP_TIMING 0xb8 +#define SCL_I3C_TIMING_HCNT(x) (((x) << 16) & GENMASK(23, 16)) +#define SCL_I3C_TIMING_LCNT(x) ((x) & GENMASK(7, 0)) +#define SCL_I3C_TIMING_CNT_MIN 5 + +#define SCL_I2C_FM_TIMING 0xbc +#define SCL_I2C_FM_TIMING_HCNT(x) (((x) << 16) & GENMASK(31, 16)) +#define SCL_I2C_FM_TIMING_LCNT(x) ((x) & GENMASK(15, 0)) + +#define SCL_I2C_FMP_TIMING 0xc0 +#define SCL_I2C_FMP_TIMING_HCNT(x) (((x) << 16) & GENMASK(23, 16)) +#define SCL_I2C_FMP_TIMING_LCNT(x) ((x) & GENMASK(15, 0)) + +#define SCL_EXT_LCNT_TIMING 0xc8 +#define SCL_EXT_LCNT_4(x) (((x) << 24) & GENMASK(31, 24)) +#define SCL_EXT_LCNT_3(x) (((x) << 16) & GENMASK(23, 16)) +#define SCL_EXT_LCNT_2(x) (((x) << 8) & GENMASK(15, 8)) +#define SCL_EXT_LCNT_1(x) ((x) & GENMASK(7, 0)) + +#define SCL_EXT_TERMN_LCNT_TIMING 0xcc +#define BUS_FREE_TIMING 0xd4 +#define BUS_I3C_MST_FREE(x) ((x) & GENMASK(15, 0)) + +#define BUS_IDLE_TIMING 0xd8 +#define I3C_VER_ID 0xe0 +#define I3C_VER_TYPE 0xe4 +#define EXTENDED_CAPABILITY 0xe8 +#define SLAVE_CONFIG 0xec + +#define DEV_ADDR_TABLE_LEGACY_I2C_DEV BIT(31) +#define DEV_ADDR_TABLE_DYNAMIC_ADDR(x) (((x) << 16) & GENMASK(23, 16)) +#define DEV_ADDR_TABLE_STATIC_ADDR(x) ((x) & GENMASK(6, 0)) +#define DEV_ADDR_TABLE_LOC(start, idx) ((start) + ((idx) << 2)) + +#define MAX_DEVS 32 + +#define I3C_BUS_SDR1_SCL_RATE 8000000 +#define I3C_BUS_SDR2_SCL_RATE 6000000 +#define I3C_BUS_SDR3_SCL_RATE 4000000 +#define I3C_BUS_SDR4_SCL_RATE 2000000 +#define I3C_BUS_I2C_FM_TLOW_MIN_NS 1300 +#define I3C_BUS_I2C_FMP_TLOW_MIN_NS 500 +#define I3C_BUS_THIGH_MAX_NS 41 + +#define XFER_TIMEOUT (msecs_to_jiffies(1000)) + +struct dw_i3c_master_caps { + u8 cmdfifodepth; + u8 datafifodepth; +}; + +struct dw_i3c_cmd { + u32 cmd_lo; + u32 cmd_hi; + u16 tx_len; + const void *tx_buf; + u16 rx_len; + void *rx_buf; + u8 error; +}; + +struct dw_i3c_xfer { + struct list_head node; + struct completion comp; + int ret; + unsigned int ncmds; + struct dw_i3c_cmd cmds[0]; +}; + +struct dw_i3c_master { + struct i3c_master_controller base; + u16 maxdevs; + u16 datstartaddr; + u32 free_pos; + struct { + struct list_head list; + struct dw_i3c_xfer *cur; + spinlock_t lock; + } xferqueue; + struct dw_i3c_master_caps caps; + void __iomem *regs; + struct reset_control *core_rst; + struct clk *core_clk; + char version[5]; + char type[5]; + u8 addrs[MAX_DEVS]; +}; + +struct dw_i3c_i2c_dev_data { + u8 index; +}; + +static u8 even_parity(u8 p) +{ + p ^= p >> 4; + p &= 0xf; + + return (0x9669 >> p) & 1; +} + +static bool dw_i3c_master_supports_ccc_cmd(struct i3c_master_controller *m, + const struct i3c_ccc_cmd *cmd) +{ + if (cmd->ndests > 1) + return false; + + switch (cmd->id) { + case I3C_CCC_ENEC(true): + case I3C_CCC_ENEC(false): + case I3C_CCC_DISEC(true): + case I3C_CCC_DISEC(false): + case I3C_CCC_ENTAS(0, true): + case I3C_CCC_ENTAS(0, false): + case I3C_CCC_RSTDAA(true): + case I3C_CCC_RSTDAA(false): + case I3C_CCC_ENTDAA: + case I3C_CCC_SETMWL(true): + case I3C_CCC_SETMWL(false): + case I3C_CCC_SETMRL(true): + case I3C_CCC_SETMRL(false): + case I3C_CCC_ENTHDR(0): + case I3C_CCC_SETDASA: + case I3C_CCC_SETNEWDA: + case I3C_CCC_GETMWL: + case I3C_CCC_GETMRL: + case I3C_CCC_GETPID: + case I3C_CCC_GETBCR: + case I3C_CCC_GETDCR: + case I3C_CCC_GETSTATUS: + case I3C_CCC_GETMXDS: + case I3C_CCC_GETHDRCAP: + return true; + default: + return false; + } +} + +static inline struct dw_i3c_master * +to_dw_i3c_master(struct i3c_master_controller *master) +{ + return container_of(master, struct dw_i3c_master, base); +} + +static void dw_i3c_master_disable(struct dw_i3c_master *master) +{ + writel(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_ENABLE, + master->regs + DEVICE_CTRL); +} + +static void dw_i3c_master_enable(struct dw_i3c_master *master) +{ + writel(readl(master->regs + DEVICE_CTRL) | DEV_CTRL_ENABLE, + master->regs + DEVICE_CTRL); +} + +static int dw_i3c_master_get_addr_pos(struct dw_i3c_master *master, u8 addr) +{ + int pos; + + for (pos = 0; pos < master->maxdevs; pos++) { + if (addr == master->addrs[pos]) + return pos; + } + + return -EINVAL; +} + +static int dw_i3c_master_get_free_pos(struct dw_i3c_master *master) +{ + if (!(master->free_pos & GENMASK(master->maxdevs - 1, 0))) + return -ENOSPC; + + return ffs(master->free_pos) - 1; +} + +static void dw_i3c_master_wr_tx_fifo(struct dw_i3c_master *master, + const u8 *bytes, int nbytes) +{ + writesl(master->regs + RX_TX_DATA_PORT, bytes, nbytes / 4); + if (nbytes & 3) { + u32 tmp = 0; + + memcpy(&tmp, bytes + (nbytes & ~3), nbytes & 3); + writesl(master->regs + RX_TX_DATA_PORT, &tmp, 1); + } +} + +static void dw_i3c_master_read_rx_fifo(struct dw_i3c_master *master, + u8 *bytes, int nbytes) +{ + readsl(master->regs + RX_TX_DATA_PORT, bytes, nbytes / 4); + if (nbytes & 3) { + u32 tmp; + + readsl(master->regs + RX_TX_DATA_PORT, &tmp, 1); + memcpy(bytes + (nbytes & ~3), &tmp, nbytes & 3); + } +} + +static struct dw_i3c_xfer * +dw_i3c_master_alloc_xfer(struct dw_i3c_master *master, unsigned int ncmds) +{ + struct dw_i3c_xfer *xfer; + + xfer = kzalloc(struct_size(xfer, cmds, ncmds), GFP_KERNEL); + if (!xfer) + return NULL; + + INIT_LIST_HEAD(&xfer->node); + xfer->ncmds = ncmds; + xfer->ret = -ETIMEDOUT; + + return xfer; +} + +static void dw_i3c_master_free_xfer(struct dw_i3c_xfer *xfer) +{ + kfree(xfer); +} + +static void dw_i3c_master_start_xfer_locked(struct dw_i3c_master *master) +{ + struct dw_i3c_xfer *xfer = master->xferqueue.cur; + unsigned int i; + u32 thld_ctrl; + + if (!xfer) + return; + + for (i = 0; i < xfer->ncmds; i++) { + struct dw_i3c_cmd *cmd = &xfer->cmds[i]; + + dw_i3c_master_wr_tx_fifo(master, cmd->tx_buf, cmd->tx_len); + } + + thld_ctrl = readl(master->regs + QUEUE_THLD_CTRL); + thld_ctrl &= ~QUEUE_THLD_CTRL_RESP_BUF_MASK; + thld_ctrl |= QUEUE_THLD_CTRL_RESP_BUF(xfer->ncmds); + writel(thld_ctrl, master->regs + QUEUE_THLD_CTRL); + + for (i = 0; i < xfer->ncmds; i++) { + struct dw_i3c_cmd *cmd = &xfer->cmds[i]; + + writel(cmd->cmd_hi, master->regs + COMMAND_QUEUE_PORT); + writel(cmd->cmd_lo, master->regs + COMMAND_QUEUE_PORT); + } +} + +static void dw_i3c_master_enqueue_xfer(struct dw_i3c_master *master, + struct dw_i3c_xfer *xfer) +{ + unsigned long flags; + + init_completion(&xfer->comp); + spin_lock_irqsave(&master->xferqueue.lock, flags); + if (master->xferqueue.cur) { + list_add_tail(&xfer->node, &master->xferqueue.list); + } else { + master->xferqueue.cur = xfer; + dw_i3c_master_start_xfer_locked(master); + } + spin_unlock_irqrestore(&master->xferqueue.lock, flags); +} + +static void dw_i3c_master_dequeue_xfer(struct dw_i3c_master *master, + struct dw_i3c_xfer *xfer) +{ + unsigned long flags; + + spin_lock_irqsave(&master->xferqueue.lock, flags); + if (master->xferqueue.cur == xfer) { + u32 status; + + master->xferqueue.cur = NULL; + + writel(RESET_CTRL_RX_FIFO | RESET_CTRL_TX_FIFO | + RESET_CTRL_RESP_QUEUE | RESET_CTRL_CMD_QUEUE, + master->regs + RESET_CTRL); + + readl_poll_timeout_atomic(master->regs + RESET_CTRL, status, + !status, 10, 1000000); + } else { + list_del_init(&xfer->node); + } + spin_unlock_irqrestore(&master->xferqueue.lock, flags); +} + +static void dw_i3c_master_end_xfer_locked(struct dw_i3c_master *master, u32 isr) +{ + struct dw_i3c_xfer *xfer = master->xferqueue.cur; + int i, ret = 0; + u32 nresp; + + if (!xfer) + return; + + nresp = readl(master->regs + QUEUE_STATUS_LEVEL); + nresp = QUEUE_STATUS_LEVEL_RESP(nresp); + + for (i = 0; i < nresp; i++) { + struct dw_i3c_cmd *cmd; + u32 resp; + + resp = readl(master->regs + RESPONSE_QUEUE_PORT); + + cmd = &xfer->cmds[RESPONSE_PORT_TID(resp)]; + cmd->rx_len = RESPONSE_PORT_DATA_LEN(resp); + cmd->error = RESPONSE_PORT_ERR_STATUS(resp); + if (cmd->rx_len && !cmd->error) + dw_i3c_master_read_rx_fifo(master, cmd->rx_buf, + cmd->rx_len); + } + + for (i = 0; i < nresp; i++) { + switch (xfer->cmds[i].error) { + case RESPONSE_NO_ERROR: + break; + case RESPONSE_ERROR_PARITY: + case RESPONSE_ERROR_IBA_NACK: + case RESPONSE_ERROR_TRANSF_ABORT: + case RESPONSE_ERROR_CRC: + case RESPONSE_ERROR_FRAME: + ret = -EIO; + break; + case RESPONSE_ERROR_OVER_UNDER_FLOW: + ret = -ENOSPC; + break; + case RESPONSE_ERROR_I2C_W_NACK_ERR: + case RESPONSE_ERROR_ADDRESS_NACK: + default: + ret = -EINVAL; + break; + } + } + + xfer->ret = ret; + complete(&xfer->comp); + + if (ret < 0) { + dw_i3c_master_dequeue_xfer(master, xfer); + writel(readl(master->regs + DEVICE_CTRL) | DEV_CTRL_RESUME, + master->regs + DEVICE_CTRL); + } + + xfer = list_first_entry_or_null(&master->xferqueue.list, + struct dw_i3c_xfer, + node); + if (xfer) + list_del_init(&xfer->node); + + master->xferqueue.cur = xfer; + dw_i3c_master_start_xfer_locked(master); +} + +static int dw_i3c_clk_cfg(struct dw_i3c_master *master) +{ + unsigned long core_rate, core_period; + u32 scl_timing; + u8 hcnt, lcnt; + + core_rate = clk_get_rate(master->core_clk); + if (!core_rate) + return -EINVAL; + + core_period = DIV_ROUND_UP(1000000000, core_rate); + + hcnt = DIV_ROUND_UP(I3C_BUS_THIGH_MAX_NS, core_period) - 1; + if (hcnt < SCL_I3C_TIMING_CNT_MIN) + hcnt = SCL_I3C_TIMING_CNT_MIN; + + lcnt = DIV_ROUND_UP(core_rate, I3C_BUS_TYP_I3C_SCL_RATE) - hcnt; + if (lcnt < SCL_I3C_TIMING_CNT_MIN) + lcnt = SCL_I3C_TIMING_CNT_MIN; + + scl_timing = SCL_I3C_TIMING_HCNT(hcnt) | SCL_I3C_TIMING_LCNT(lcnt); + writel(scl_timing, master->regs + SCL_I3C_PP_TIMING); + + if (!(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_I2C_SLAVE_PRESENT)) + writel(BUS_I3C_MST_FREE(lcnt), master->regs + BUS_FREE_TIMING); + + lcnt = DIV_ROUND_UP(I3C_BUS_TLOW_OD_MIN_NS, core_period); + scl_timing = SCL_I3C_TIMING_HCNT(hcnt) | SCL_I3C_TIMING_LCNT(lcnt); + writel(scl_timing, master->regs + SCL_I3C_OD_TIMING); + + lcnt = DIV_ROUND_UP(core_rate, I3C_BUS_SDR1_SCL_RATE) - hcnt; + scl_timing = SCL_EXT_LCNT_1(lcnt); + lcnt = DIV_ROUND_UP(core_rate, I3C_BUS_SDR2_SCL_RATE) - hcnt; + scl_timing |= SCL_EXT_LCNT_2(lcnt); + lcnt = DIV_ROUND_UP(core_rate, I3C_BUS_SDR3_SCL_RATE) - hcnt; + scl_timing |= SCL_EXT_LCNT_3(lcnt); + lcnt = DIV_ROUND_UP(core_rate, I3C_BUS_SDR4_SCL_RATE) - hcnt; + scl_timing |= SCL_EXT_LCNT_4(lcnt); + writel(scl_timing, master->regs + SCL_EXT_LCNT_TIMING); + + return 0; +} + +static int dw_i2c_clk_cfg(struct dw_i3c_master *master) +{ + unsigned long core_rate, core_period; + u16 hcnt, lcnt; + u32 scl_timing; + + core_rate = clk_get_rate(master->core_clk); + if (!core_rate) + return -EINVAL; + + core_period = DIV_ROUND_UP(1000000000, core_rate); + + lcnt = DIV_ROUND_UP(I3C_BUS_I2C_FMP_TLOW_MIN_NS, core_period); + hcnt = DIV_ROUND_UP(core_rate, I3C_BUS_I2C_FM_PLUS_SCL_RATE) - lcnt; + scl_timing = SCL_I2C_FMP_TIMING_HCNT(hcnt) | + SCL_I2C_FMP_TIMING_LCNT(lcnt); + writel(scl_timing, master->regs + SCL_I2C_FMP_TIMING); + + lcnt = DIV_ROUND_UP(I3C_BUS_I2C_FM_TLOW_MIN_NS, core_period); + hcnt = DIV_ROUND_UP(core_rate, I3C_BUS_I2C_FM_SCL_RATE) - lcnt; + scl_timing = SCL_I2C_FM_TIMING_HCNT(hcnt) | + SCL_I2C_FM_TIMING_LCNT(lcnt); + writel(scl_timing, master->regs + SCL_I2C_FM_TIMING); + + writel(BUS_I3C_MST_FREE(lcnt), master->regs + BUS_FREE_TIMING); + writel(readl(master->regs + DEVICE_CTRL) | DEV_CTRL_I2C_SLAVE_PRESENT, + master->regs + DEVICE_CTRL); + + return 0; +} + +static int dw_i3c_master_bus_init(struct i3c_master_controller *m) +{ + struct dw_i3c_master *master = to_dw_i3c_master(m); + struct i3c_bus *bus = i3c_master_get_bus(m); + struct i3c_device_info info = { }; + u32 thld_ctrl; + int ret; + + switch (bus->mode) { + case I3C_BUS_MODE_MIXED_FAST: + ret = dw_i2c_clk_cfg(master); + if (ret) + return ret; + case I3C_BUS_MODE_PURE: + ret = dw_i3c_clk_cfg(master); + if (ret) + return ret; + break; + default: + return -EINVAL; + } + + thld_ctrl = readl(master->regs + QUEUE_THLD_CTRL); + thld_ctrl &= ~QUEUE_THLD_CTRL_RESP_BUF_MASK; + writel(thld_ctrl, master->regs + QUEUE_THLD_CTRL); + + thld_ctrl = readl(master->regs + DATA_BUFFER_THLD_CTRL); + thld_ctrl &= ~DATA_BUFFER_THLD_CTRL_RX_BUF; + writel(thld_ctrl, master->regs + DATA_BUFFER_THLD_CTRL); + + writel(INTR_ALL, master->regs + INTR_STATUS); + writel(INTR_MASTER_MASK, master->regs + INTR_STATUS_EN); + writel(INTR_MASTER_MASK, master->regs + INTR_SIGNAL_EN); + + ret = i3c_master_get_free_addr(m, 0); + if (ret < 0) + return ret; + + writel(DEV_ADDR_DYNAMIC_ADDR_VALID | DEV_ADDR_DYNAMIC(ret), + master->regs + DEVICE_ADDR); + + memset(&info, 0, sizeof(info)); + info.dyn_addr = ret; + + ret = i3c_master_set_info(&master->base, &info); + if (ret) + return ret; + + writel(IBI_REQ_REJECT_ALL, master->regs + IBI_SIR_REQ_REJECT); + writel(IBI_REQ_REJECT_ALL, master->regs + IBI_MR_REQ_REJECT); + + /* For now don't support Hot-Join */ + writel(readl(master->regs + DEVICE_CTRL) | DEV_CTRL_HOT_JOIN_NACK, + master->regs + DEVICE_CTRL); + + dw_i3c_master_enable(master); + + return 0; +} + +static void dw_i3c_master_bus_cleanup(struct i3c_master_controller *m) +{ + struct dw_i3c_master *master = to_dw_i3c_master(m); + + dw_i3c_master_disable(master); +} + +static int dw_i3c_ccc_set(struct dw_i3c_master *master, + struct i3c_ccc_cmd *ccc) +{ + struct dw_i3c_xfer *xfer; + struct dw_i3c_cmd *cmd; + int ret, pos = 0; + + if (ccc->id & I3C_CCC_DIRECT) { + pos = dw_i3c_master_get_addr_pos(master, ccc->dests[0].addr); + if (pos < 0) + return pos; + } + + xfer = dw_i3c_master_alloc_xfer(master, 1); + if (!xfer) + return -ENOMEM; + + cmd = xfer->cmds; + cmd->tx_buf = ccc->dests[0].payload.data; + cmd->tx_len = ccc->dests[0].payload.len; + + cmd->cmd_hi = COMMAND_PORT_ARG_DATA_LEN(ccc->dests[0].payload.len) | + COMMAND_PORT_TRANSFER_ARG; + + cmd->cmd_lo = COMMAND_PORT_CP | + COMMAND_PORT_DEV_INDEX(pos) | + COMMAND_PORT_CMD(ccc->id) | + COMMAND_PORT_TOC | + COMMAND_PORT_ROC; + + dw_i3c_master_enqueue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) + dw_i3c_master_dequeue_xfer(master, xfer); + + ret = xfer->ret; + if (xfer->cmds[0].error == RESPONSE_ERROR_IBA_NACK) + ccc->err = I3C_ERROR_M2; + + dw_i3c_master_free_xfer(xfer); + + return ret; +} + +static int dw_i3c_ccc_get(struct dw_i3c_master *master, struct i3c_ccc_cmd *ccc) +{ + struct dw_i3c_xfer *xfer; + struct dw_i3c_cmd *cmd; + int ret, pos; + + pos = dw_i3c_master_get_addr_pos(master, ccc->dests[0].addr); + if (pos < 0) + return pos; + + xfer = dw_i3c_master_alloc_xfer(master, 1); + if (!xfer) + return -ENOMEM; + + cmd = xfer->cmds; + cmd->rx_buf = ccc->dests[0].payload.data; + cmd->rx_len = ccc->dests[0].payload.len; + + cmd->cmd_hi = COMMAND_PORT_ARG_DATA_LEN(ccc->dests[0].payload.len) | + COMMAND_PORT_TRANSFER_ARG; + + cmd->cmd_lo = COMMAND_PORT_READ_TRANSFER | + COMMAND_PORT_CP | + COMMAND_PORT_DEV_INDEX(pos) | + COMMAND_PORT_CMD(ccc->id) | + COMMAND_PORT_TOC | + COMMAND_PORT_ROC; + + dw_i3c_master_enqueue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) + dw_i3c_master_dequeue_xfer(master, xfer); + + ret = xfer->ret; + if (xfer->cmds[0].error == RESPONSE_ERROR_IBA_NACK) + ccc->err = I3C_ERROR_M2; + dw_i3c_master_free_xfer(xfer); + + return ret; +} + +static int dw_i3c_master_send_ccc_cmd(struct i3c_master_controller *m, + struct i3c_ccc_cmd *ccc) +{ + struct dw_i3c_master *master = to_dw_i3c_master(m); + int ret = 0; + + if (ccc->id == I3C_CCC_ENTDAA) + return -EINVAL; + + if (ccc->rnw) + ret = dw_i3c_ccc_get(master, ccc); + else + ret = dw_i3c_ccc_set(master, ccc); + + return ret; +} + +static int dw_i3c_master_daa(struct i3c_master_controller *m) +{ + struct dw_i3c_master *master = to_dw_i3c_master(m); + struct dw_i3c_xfer *xfer; + struct dw_i3c_cmd *cmd; + u32 olddevs, newdevs; + u8 p, last_addr = 0; + int ret, pos; + + olddevs = ~(master->free_pos); + + /* Prepare DAT before launching DAA. */ + for (pos = 0; pos < master->maxdevs; pos++) { + if (olddevs & BIT(pos)) + continue; + + ret = i3c_master_get_free_addr(m, last_addr + 1); + if (ret < 0) + return -ENOSPC; + + master->addrs[pos] = ret; + p = even_parity(ret); + last_addr = ret; + ret |= (p << 7); + + writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(ret), + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, pos)); + } + + xfer = dw_i3c_master_alloc_xfer(master, 1); + if (!xfer) + return -ENOMEM; + + pos = dw_i3c_master_get_free_pos(master); + cmd = &xfer->cmds[0]; + cmd->cmd_hi = 0x1; + cmd->cmd_lo = COMMAND_PORT_DEV_COUNT(master->maxdevs - pos) | + COMMAND_PORT_DEV_INDEX(pos) | + COMMAND_PORT_CMD(I3C_CCC_ENTDAA) | + COMMAND_PORT_ADDR_ASSGN_CMD | + COMMAND_PORT_TOC | + COMMAND_PORT_ROC; + + dw_i3c_master_enqueue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) + dw_i3c_master_dequeue_xfer(master, xfer); + + newdevs = GENMASK(master->maxdevs - cmd->rx_len - 1, 0); + newdevs &= ~olddevs; + + for (pos = 0; pos < master->maxdevs; pos++) { + if (newdevs & BIT(pos)) + i3c_master_add_i3c_dev_locked(m, master->addrs[pos]); + } + + dw_i3c_master_free_xfer(xfer); + + i3c_master_disec_locked(m, I3C_BROADCAST_ADDR, + I3C_CCC_EVENT_HJ | + I3C_CCC_EVENT_MR | + I3C_CCC_EVENT_SIR); + + return 0; +} + +static int dw_i3c_master_priv_xfers(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *i3c_xfers, + int i3c_nxfers) +{ + struct dw_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + unsigned int nrxwords = 0, ntxwords = 0; + struct dw_i3c_xfer *xfer; + int i, ret = 0; + + if (!i3c_nxfers) + return 0; + + if (i3c_nxfers > master->caps.cmdfifodepth) + return -ENOTSUPP; + + for (i = 0; i < i3c_nxfers; i++) { + if (i3c_xfers[i].len > COMMAND_PORT_ARG_DATA_LEN_MAX) + return -ENOTSUPP; + } + + for (i = 0; i < i3c_nxfers; i++) { + if (i3c_xfers[i].rnw) + nrxwords += DIV_ROUND_UP(i3c_xfers[i].len, 4); + else + ntxwords += DIV_ROUND_UP(i3c_xfers[i].len, 4); + } + + if (ntxwords > master->caps.datafifodepth || + nrxwords > master->caps.datafifodepth) + return -ENOTSUPP; + + xfer = dw_i3c_master_alloc_xfer(master, i3c_nxfers); + if (!xfer) + return -ENOMEM; + + for (i = 0; i < i3c_nxfers; i++) { + struct dw_i3c_cmd *cmd = &xfer->cmds[i]; + + cmd->cmd_hi = COMMAND_PORT_ARG_DATA_LEN(i3c_xfers[i].len) | + COMMAND_PORT_TRANSFER_ARG; + + if (i3c_xfers[i].rnw) { + cmd->rx_buf = i3c_xfers[i].data.in; + cmd->rx_len = i3c_xfers[i].len; + cmd->cmd_lo = COMMAND_PORT_READ_TRANSFER | + COMMAND_PORT_SPEED(dev->info.max_read_ds); + + } else { + cmd->tx_buf = i3c_xfers[i].data.out; + cmd->tx_len = i3c_xfers[i].len; + cmd->cmd_lo = + COMMAND_PORT_SPEED(dev->info.max_write_ds); + } + + cmd->cmd_lo |= COMMAND_PORT_TID(i) | + COMMAND_PORT_DEV_INDEX(data->index) | + COMMAND_PORT_ROC; + + if (i == (i3c_nxfers - 1)) + cmd->cmd_lo |= COMMAND_PORT_TOC; + } + + dw_i3c_master_enqueue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) + dw_i3c_master_dequeue_xfer(master, xfer); + + ret = xfer->ret; + dw_i3c_master_free_xfer(xfer); + + return ret; +} + +static int dw_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, + u8 old_dyn_addr) +{ + struct dw_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + + writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr), + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index)); + + if (!old_dyn_addr) + return 0; + + master->addrs[data->index] = dev->info.dyn_addr; + + return 0; +} + +static int dw_i3c_master_attach_i3c_dev(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + struct dw_i3c_i2c_dev_data *data; + int pos; + + pos = dw_i3c_master_get_free_pos(master); + if (pos < 0) + return pos; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->index = pos; + master->addrs[pos] = dev->info.dyn_addr; + master->free_pos &= ~BIT(pos); + i3c_dev_set_master_data(dev, data); + + writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr), + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index)); + + return 0; +} + +static void dw_i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev) +{ + struct dw_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + + writel(0, + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index)); + + i3c_dev_set_master_data(dev, NULL); + master->addrs[data->index] = 0; + master->free_pos |= BIT(data->index); + kfree(data); +} + +static int dw_i3c_master_i2c_xfers(struct i2c_dev_desc *dev, + const struct i2c_msg *i2c_xfers, + int i2c_nxfers) +{ + struct dw_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev); + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + unsigned int nrxwords = 0, ntxwords = 0; + struct dw_i3c_xfer *xfer; + int i, ret = 0; + + if (!i2c_nxfers) + return 0; + + if (i2c_nxfers > master->caps.cmdfifodepth) + return -ENOTSUPP; + + for (i = 0; i < i2c_nxfers; i++) { + if (i2c_xfers[i].len > COMMAND_PORT_ARG_DATA_LEN_MAX) + return -ENOTSUPP; + } + + for (i = 0; i < i2c_nxfers; i++) { + if (i2c_xfers[i].flags & I2C_M_RD) + nrxwords += DIV_ROUND_UP(i2c_xfers[i].len, 4); + else + ntxwords += DIV_ROUND_UP(i2c_xfers[i].len, 4); + } + + if (ntxwords > master->caps.datafifodepth || + nrxwords > master->caps.datafifodepth) + return -ENOTSUPP; + + xfer = dw_i3c_master_alloc_xfer(master, i2c_nxfers); + if (!xfer) + return -ENOMEM; + + for (i = 0; i < i2c_nxfers; i++) { + struct dw_i3c_cmd *cmd = &xfer->cmds[i]; + + cmd->cmd_hi = COMMAND_PORT_ARG_DATA_LEN(i2c_xfers[i].len) | + COMMAND_PORT_TRANSFER_ARG; + + cmd->cmd_lo = COMMAND_PORT_TID(i) | + COMMAND_PORT_DEV_INDEX(data->index) | + COMMAND_PORT_ROC; + + if (i2c_xfers[i].flags & I2C_M_RD) { + cmd->cmd_lo |= COMMAND_PORT_READ_TRANSFER; + cmd->rx_buf = i2c_xfers[i].buf; + cmd->rx_len = i2c_xfers[i].len; + } else { + cmd->tx_buf = i2c_xfers[i].buf; + cmd->tx_len = i2c_xfers[i].len; + } + + if (i == (i2c_nxfers - 1)) + cmd->cmd_lo |= COMMAND_PORT_TOC; + } + + dw_i3c_master_enqueue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) + dw_i3c_master_dequeue_xfer(master, xfer); + + ret = xfer->ret; + dw_i3c_master_free_xfer(xfer); + + return ret; +} + +static int dw_i3c_master_attach_i2c_dev(struct i2c_dev_desc *dev) +{ + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + struct dw_i3c_i2c_dev_data *data; + int pos; + + pos = dw_i3c_master_get_free_pos(master); + if (pos < 0) + return pos; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->index = pos; + master->addrs[pos] = dev->boardinfo->base.addr; + master->free_pos &= ~BIT(pos); + i2c_dev_set_master_data(dev, data); + + writel(DEV_ADDR_TABLE_LEGACY_I2C_DEV | + DEV_ADDR_TABLE_STATIC_ADDR(dev->boardinfo->base.addr), + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index)); + + return 0; +} + +static void dw_i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev) +{ + struct dw_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev); + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct dw_i3c_master *master = to_dw_i3c_master(m); + + writel(0, + master->regs + + DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index)); + + i2c_dev_set_master_data(dev, NULL); + master->addrs[data->index] = 0; + master->free_pos |= BIT(data->index); + kfree(data); +} + +static u32 dw_i3c_master_i2c_funcs(struct i3c_master_controller *m) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static irqreturn_t dw_i3c_master_irq_handler(int irq, void *dev_id) +{ + struct dw_i3c_master *master = dev_id; + u32 status; + + status = readl(master->regs + INTR_STATUS); + + if (!(status & readl(master->regs + INTR_STATUS_EN))) { + writel(INTR_ALL, master->regs + INTR_STATUS); + return IRQ_NONE; + } + + spin_lock(&master->xferqueue.lock); + dw_i3c_master_end_xfer_locked(master, status); + if (status & INTR_TRANSFER_ERR_STAT) + writel(INTR_TRANSFER_ERR_STAT, master->regs + INTR_STATUS); + spin_unlock(&master->xferqueue.lock); + + return IRQ_HANDLED; +} + +static const struct i3c_master_controller_ops dw_mipi_i3c_ops = { + .bus_init = dw_i3c_master_bus_init, + .bus_cleanup = dw_i3c_master_bus_cleanup, + .attach_i3c_dev = dw_i3c_master_attach_i3c_dev, + .reattach_i3c_dev = dw_i3c_master_reattach_i3c_dev, + .detach_i3c_dev = dw_i3c_master_detach_i3c_dev, + .do_daa = dw_i3c_master_daa, + .supports_ccc_cmd = dw_i3c_master_supports_ccc_cmd, + .send_ccc_cmd = dw_i3c_master_send_ccc_cmd, + .priv_xfers = dw_i3c_master_priv_xfers, + .attach_i2c_dev = dw_i3c_master_attach_i2c_dev, + .detach_i2c_dev = dw_i3c_master_detach_i2c_dev, + .i2c_xfers = dw_i3c_master_i2c_xfers, + .i2c_funcs = dw_i3c_master_i2c_funcs, +}; + +static int dw_i3c_probe(struct platform_device *pdev) +{ + struct dw_i3c_master *master; + struct resource *res; + int ret, irq; + + master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL); + if (!master) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + master->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(master->regs)) + return PTR_ERR(master->regs); + + master->core_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(master->core_clk)) + return PTR_ERR(master->core_clk); + + master->core_rst = devm_reset_control_get_optional_exclusive(&pdev->dev, + "core_rst"); + if (IS_ERR(master->core_rst)) + return PTR_ERR(master->core_rst); + + ret = clk_prepare_enable(master->core_clk); + if (ret) + goto err_disable_core_clk; + + reset_control_deassert(master->core_rst); + + spin_lock_init(&master->xferqueue.lock); + INIT_LIST_HEAD(&master->xferqueue.list); + + writel(INTR_ALL, master->regs + INTR_STATUS); + irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(&pdev->dev, irq, + dw_i3c_master_irq_handler, 0, + dev_name(&pdev->dev), master); + if (ret) + goto err_assert_rst; + + platform_set_drvdata(pdev, master); + + /* Information regarding the FIFOs/QUEUEs depth */ + ret = readl(master->regs + QUEUE_STATUS_LEVEL); + master->caps.cmdfifodepth = QUEUE_STATUS_LEVEL_CMD(ret); + + ret = readl(master->regs + DATA_BUFFER_STATUS_LEVEL); + master->caps.datafifodepth = DATA_BUFFER_STATUS_LEVEL_TX(ret); + + ret = readl(master->regs + DEVICE_ADDR_TABLE_POINTER); + master->datstartaddr = ret; + master->maxdevs = ret >> 16; + master->free_pos = GENMASK(master->maxdevs - 1, 0); + + ret = i3c_master_register(&master->base, &pdev->dev, + &dw_mipi_i3c_ops, false); + if (ret) + goto err_assert_rst; + + return 0; + +err_assert_rst: + reset_control_assert(master->core_rst); + +err_disable_core_clk: + clk_disable_unprepare(master->core_clk); + + return ret; +} + +static int dw_i3c_remove(struct platform_device *pdev) +{ + struct dw_i3c_master *master = platform_get_drvdata(pdev); + int ret; + + ret = i3c_master_unregister(&master->base); + if (ret) + return ret; + + reset_control_assert(master->core_rst); + + clk_disable_unprepare(master->core_clk); + + return 0; +} + +static const struct of_device_id dw_i3c_master_of_match[] = { + { .compatible = "snps,dw-i3c-master-1.00a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_i3c_master_of_match); + +static struct platform_driver dw_i3c_driver = { + .probe = dw_i3c_probe, + .remove = dw_i3c_remove, + .driver = { + .name = "dw-i3c-master", + .of_match_table = of_match_ptr(dw_i3c_master_of_match), + }, +}; +module_platform_driver(dw_i3c_driver); + +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); +MODULE_DESCRIPTION("DesignWare MIPI I3C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c new file mode 100644 index 000000000000..bbd79b8b1a80 --- /dev/null +++ b/drivers/i3c/master/i3c-master-cdns.c @@ -0,0 +1,1666 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/i3c/master.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#define DEV_ID 0x0 +#define DEV_ID_I3C_MASTER 0x5034 + +#define CONF_STATUS0 0x4 +#define CONF_STATUS0_CMDR_DEPTH(x) (4 << (((x) & GENMASK(31, 29)) >> 29)) +#define CONF_STATUS0_ECC_CHK BIT(28) +#define CONF_STATUS0_INTEG_CHK BIT(27) +#define CONF_STATUS0_CSR_DAP_CHK BIT(26) +#define CONF_STATUS0_TRANS_TOUT_CHK BIT(25) +#define CONF_STATUS0_PROT_FAULTS_CHK BIT(24) +#define CONF_STATUS0_GPO_NUM(x) (((x) & GENMASK(23, 16)) >> 16) +#define CONF_STATUS0_GPI_NUM(x) (((x) & GENMASK(15, 8)) >> 8) +#define CONF_STATUS0_IBIR_DEPTH(x) (4 << (((x) & GENMASK(7, 6)) >> 7)) +#define CONF_STATUS0_SUPPORTS_DDR BIT(5) +#define CONF_STATUS0_SEC_MASTER BIT(4) +#define CONF_STATUS0_DEVS_NUM(x) ((x) & GENMASK(3, 0)) + +#define CONF_STATUS1 0x8 +#define CONF_STATUS1_IBI_HW_RES(x) ((((x) & GENMASK(31, 28)) >> 28) + 1) +#define CONF_STATUS1_CMD_DEPTH(x) (4 << (((x) & GENMASK(27, 26)) >> 26)) +#define CONF_STATUS1_SLVDDR_RX_DEPTH(x) (8 << (((x) & GENMASK(25, 21)) >> 21)) +#define CONF_STATUS1_SLVDDR_TX_DEPTH(x) (8 << (((x) & GENMASK(20, 16)) >> 16)) +#define CONF_STATUS1_IBI_DEPTH(x) (2 << (((x) & GENMASK(12, 10)) >> 10)) +#define CONF_STATUS1_RX_DEPTH(x) (8 << (((x) & GENMASK(9, 5)) >> 5)) +#define CONF_STATUS1_TX_DEPTH(x) (8 << ((x) & GENMASK(4, 0))) + +#define REV_ID 0xc +#define REV_ID_VID(id) (((id) & GENMASK(31, 20)) >> 20) +#define REV_ID_PID(id) (((id) & GENMASK(19, 8)) >> 8) +#define REV_ID_REV_MAJOR(id) (((id) & GENMASK(7, 4)) >> 4) +#define REV_ID_REV_MINOR(id) ((id) & GENMASK(3, 0)) + +#define CTRL 0x10 +#define CTRL_DEV_EN BIT(31) +#define CTRL_HALT_EN BIT(30) +#define CTRL_MCS BIT(29) +#define CTRL_MCS_EN BIT(28) +#define CTRL_HJ_DISEC BIT(8) +#define CTRL_MST_ACK BIT(7) +#define CTRL_HJ_ACK BIT(6) +#define CTRL_HJ_INIT BIT(5) +#define CTRL_MST_INIT BIT(4) +#define CTRL_AHDR_OPT BIT(3) +#define CTRL_PURE_BUS_MODE 0 +#define CTRL_MIXED_FAST_BUS_MODE 2 +#define CTRL_MIXED_SLOW_BUS_MODE 3 +#define CTRL_BUS_MODE_MASK GENMASK(1, 0) + +#define PRESCL_CTRL0 0x14 +#define PRESCL_CTRL0_I2C(x) ((x) << 16) +#define PRESCL_CTRL0_I3C(x) (x) +#define PRESCL_CTRL0_MAX GENMASK(9, 0) + +#define PRESCL_CTRL1 0x18 +#define PRESCL_CTRL1_PP_LOW_MASK GENMASK(15, 8) +#define PRESCL_CTRL1_PP_LOW(x) ((x) << 8) +#define PRESCL_CTRL1_OD_LOW_MASK GENMASK(7, 0) +#define PRESCL_CTRL1_OD_LOW(x) (x) + +#define MST_IER 0x20 +#define MST_IDR 0x24 +#define MST_IMR 0x28 +#define MST_ICR 0x2c +#define MST_ISR 0x30 +#define MST_INT_HALTED BIT(18) +#define MST_INT_MR_DONE BIT(17) +#define MST_INT_IMM_COMP BIT(16) +#define MST_INT_TX_THR BIT(15) +#define MST_INT_TX_OVF BIT(14) +#define MST_INT_IBID_THR BIT(12) +#define MST_INT_IBID_UNF BIT(11) +#define MST_INT_IBIR_THR BIT(10) +#define MST_INT_IBIR_UNF BIT(9) +#define MST_INT_IBIR_OVF BIT(8) +#define MST_INT_RX_THR BIT(7) +#define MST_INT_RX_UNF BIT(6) +#define MST_INT_CMDD_EMP BIT(5) +#define MST_INT_CMDD_THR BIT(4) +#define MST_INT_CMDD_OVF BIT(3) +#define MST_INT_CMDR_THR BIT(2) +#define MST_INT_CMDR_UNF BIT(1) +#define MST_INT_CMDR_OVF BIT(0) + +#define MST_STATUS0 0x34 +#define MST_STATUS0_IDLE BIT(18) +#define MST_STATUS0_HALTED BIT(17) +#define MST_STATUS0_MASTER_MODE BIT(16) +#define MST_STATUS0_TX_FULL BIT(13) +#define MST_STATUS0_IBID_FULL BIT(12) +#define MST_STATUS0_IBIR_FULL BIT(11) +#define MST_STATUS0_RX_FULL BIT(10) +#define MST_STATUS0_CMDD_FULL BIT(9) +#define MST_STATUS0_CMDR_FULL BIT(8) +#define MST_STATUS0_TX_EMP BIT(5) +#define MST_STATUS0_IBID_EMP BIT(4) +#define MST_STATUS0_IBIR_EMP BIT(3) +#define MST_STATUS0_RX_EMP BIT(2) +#define MST_STATUS0_CMDD_EMP BIT(1) +#define MST_STATUS0_CMDR_EMP BIT(0) + +#define CMDR 0x38 +#define CMDR_NO_ERROR 0 +#define CMDR_DDR_PREAMBLE_ERROR 1 +#define CMDR_DDR_PARITY_ERROR 2 +#define CMDR_DDR_RX_FIFO_OVF 3 +#define CMDR_DDR_TX_FIFO_UNF 4 +#define CMDR_M0_ERROR 5 +#define CMDR_M1_ERROR 6 +#define CMDR_M2_ERROR 7 +#define CMDR_MST_ABORT 8 +#define CMDR_NACK_RESP 9 +#define CMDR_INVALID_DA 10 +#define CMDR_DDR_DROPPED 11 +#define CMDR_ERROR(x) (((x) & GENMASK(27, 24)) >> 24) +#define CMDR_XFER_BYTES(x) (((x) & GENMASK(19, 8)) >> 8) +#define CMDR_CMDID_HJACK_DISEC 0xfe +#define CMDR_CMDID_HJACK_ENTDAA 0xff +#define CMDR_CMDID(x) ((x) & GENMASK(7, 0)) + +#define IBIR 0x3c +#define IBIR_ACKED BIT(12) +#define IBIR_SLVID(x) (((x) & GENMASK(11, 8)) >> 8) +#define IBIR_ERROR BIT(7) +#define IBIR_XFER_BYTES(x) (((x) & GENMASK(6, 2)) >> 2) +#define IBIR_TYPE_IBI 0 +#define IBIR_TYPE_HJ 1 +#define IBIR_TYPE_MR 2 +#define IBIR_TYPE(x) ((x) & GENMASK(1, 0)) + +#define SLV_IER 0x40 +#define SLV_IDR 0x44 +#define SLV_IMR 0x48 +#define SLV_ICR 0x4c +#define SLV_ISR 0x50 +#define SLV_INT_TM BIT(20) +#define SLV_INT_ERROR BIT(19) +#define SLV_INT_EVENT_UP BIT(18) +#define SLV_INT_HJ_DONE BIT(17) +#define SLV_INT_MR_DONE BIT(16) +#define SLV_INT_DA_UPD BIT(15) +#define SLV_INT_SDR_FAIL BIT(14) +#define SLV_INT_DDR_FAIL BIT(13) +#define SLV_INT_M_RD_ABORT BIT(12) +#define SLV_INT_DDR_RX_THR BIT(11) +#define SLV_INT_DDR_TX_THR BIT(10) +#define SLV_INT_SDR_RX_THR BIT(9) +#define SLV_INT_SDR_TX_THR BIT(8) +#define SLV_INT_DDR_RX_UNF BIT(7) +#define SLV_INT_DDR_TX_OVF BIT(6) +#define SLV_INT_SDR_RX_UNF BIT(5) +#define SLV_INT_SDR_TX_OVF BIT(4) +#define SLV_INT_DDR_RD_COMP BIT(3) +#define SLV_INT_DDR_WR_COMP BIT(2) +#define SLV_INT_SDR_RD_COMP BIT(1) +#define SLV_INT_SDR_WR_COMP BIT(0) + +#define SLV_STATUS0 0x54 +#define SLV_STATUS0_REG_ADDR(s) (((s) & GENMASK(23, 16)) >> 16) +#define SLV_STATUS0_XFRD_BYTES(s) ((s) & GENMASK(15, 0)) + +#define SLV_STATUS1 0x58 +#define SLV_STATUS1_AS(s) (((s) & GENMASK(21, 20)) >> 20) +#define SLV_STATUS1_VEN_TM BIT(19) +#define SLV_STATUS1_HJ_DIS BIT(18) +#define SLV_STATUS1_MR_DIS BIT(17) +#define SLV_STATUS1_PROT_ERR BIT(16) +#define SLV_STATUS1_DA(x) (((s) & GENMASK(15, 9)) >> 9) +#define SLV_STATUS1_HAS_DA BIT(8) +#define SLV_STATUS1_DDR_RX_FULL BIT(7) +#define SLV_STATUS1_DDR_TX_FULL BIT(6) +#define SLV_STATUS1_DDR_RX_EMPTY BIT(5) +#define SLV_STATUS1_DDR_TX_EMPTY BIT(4) +#define SLV_STATUS1_SDR_RX_FULL BIT(3) +#define SLV_STATUS1_SDR_TX_FULL BIT(2) +#define SLV_STATUS1_SDR_RX_EMPTY BIT(1) +#define SLV_STATUS1_SDR_TX_EMPTY BIT(0) + +#define CMD0_FIFO 0x60 +#define CMD0_FIFO_IS_DDR BIT(31) +#define CMD0_FIFO_IS_CCC BIT(30) +#define CMD0_FIFO_BCH BIT(29) +#define XMIT_BURST_STATIC_SUBADDR 0 +#define XMIT_SINGLE_INC_SUBADDR 1 +#define XMIT_SINGLE_STATIC_SUBADDR 2 +#define XMIT_BURST_WITHOUT_SUBADDR 3 +#define CMD0_FIFO_PRIV_XMIT_MODE(m) ((m) << 27) +#define CMD0_FIFO_SBCA BIT(26) +#define CMD0_FIFO_RSBC BIT(25) +#define CMD0_FIFO_IS_10B BIT(24) +#define CMD0_FIFO_PL_LEN(l) ((l) << 12) +#define CMD0_FIFO_PL_LEN_MAX 4095 +#define CMD0_FIFO_DEV_ADDR(a) ((a) << 1) +#define CMD0_FIFO_RNW BIT(0) + +#define CMD1_FIFO 0x64 +#define CMD1_FIFO_CMDID(id) ((id) << 24) +#define CMD1_FIFO_CSRADDR(a) (a) +#define CMD1_FIFO_CCC(id) (id) + +#define TX_FIFO 0x68 + +#define IMD_CMD0 0x70 +#define IMD_CMD0_PL_LEN(l) ((l) << 12) +#define IMD_CMD0_DEV_ADDR(a) ((a) << 1) +#define IMD_CMD0_RNW BIT(0) + +#define IMD_CMD1 0x74 +#define IMD_CMD1_CCC(id) (id) + +#define IMD_DATA 0x78 +#define RX_FIFO 0x80 +#define IBI_DATA_FIFO 0x84 +#define SLV_DDR_TX_FIFO 0x88 +#define SLV_DDR_RX_FIFO 0x8c + +#define CMD_IBI_THR_CTRL 0x90 +#define IBIR_THR(t) ((t) << 24) +#define CMDR_THR(t) ((t) << 16) +#define IBI_THR(t) ((t) << 8) +#define CMD_THR(t) (t) + +#define TX_RX_THR_CTRL 0x94 +#define RX_THR(t) ((t) << 16) +#define TX_THR(t) (t) + +#define SLV_DDR_TX_RX_THR_CTRL 0x98 +#define SLV_DDR_RX_THR(t) ((t) << 16) +#define SLV_DDR_TX_THR(t) (t) + +#define FLUSH_CTRL 0x9c +#define FLUSH_IBI_RESP BIT(23) +#define FLUSH_CMD_RESP BIT(22) +#define FLUSH_SLV_DDR_RX_FIFO BIT(22) +#define FLUSH_SLV_DDR_TX_FIFO BIT(21) +#define FLUSH_IMM_FIFO BIT(20) +#define FLUSH_IBI_FIFO BIT(19) +#define FLUSH_RX_FIFO BIT(18) +#define FLUSH_TX_FIFO BIT(17) +#define FLUSH_CMD_FIFO BIT(16) + +#define TTO_PRESCL_CTRL0 0xb0 +#define TTO_PRESCL_CTRL0_DIVB(x) ((x) << 16) +#define TTO_PRESCL_CTRL0_DIVA(x) (x) + +#define TTO_PRESCL_CTRL1 0xb4 +#define TTO_PRESCL_CTRL1_DIVB(x) ((x) << 16) +#define TTO_PRESCL_CTRL1_DIVA(x) (x) + +#define DEVS_CTRL 0xb8 +#define DEVS_CTRL_DEV_CLR_SHIFT 16 +#define DEVS_CTRL_DEV_CLR_ALL GENMASK(31, 16) +#define DEVS_CTRL_DEV_CLR(dev) BIT(16 + (dev)) +#define DEVS_CTRL_DEV_ACTIVE(dev) BIT(dev) +#define DEVS_CTRL_DEVS_ACTIVE_MASK GENMASK(15, 0) +#define MAX_DEVS 16 + +#define DEV_ID_RR0(d) (0xc0 + ((d) * 0x10)) +#define DEV_ID_RR0_LVR_EXT_ADDR BIT(11) +#define DEV_ID_RR0_HDR_CAP BIT(10) +#define DEV_ID_RR0_IS_I3C BIT(9) +#define DEV_ID_RR0_DEV_ADDR_MASK (GENMASK(6, 0) | GENMASK(15, 13)) +#define DEV_ID_RR0_SET_DEV_ADDR(a) (((a) & GENMASK(6, 0)) | \ + (((a) & GENMASK(9, 7)) << 6)) +#define DEV_ID_RR0_GET_DEV_ADDR(x) ((((x) >> 1) & GENMASK(6, 0)) | \ + (((x) >> 6) & GENMASK(9, 7))) + +#define DEV_ID_RR1(d) (0xc4 + ((d) * 0x10)) +#define DEV_ID_RR1_PID_MSB(pid) (pid) + +#define DEV_ID_RR2(d) (0xc8 + ((d) * 0x10)) +#define DEV_ID_RR2_PID_LSB(pid) ((pid) << 16) +#define DEV_ID_RR2_BCR(bcr) ((bcr) << 8) +#define DEV_ID_RR2_DCR(dcr) (dcr) +#define DEV_ID_RR2_LVR(lvr) (lvr) + +#define SIR_MAP(x) (0x180 + ((x) * 4)) +#define SIR_MAP_DEV_REG(d) SIR_MAP((d) / 2) +#define SIR_MAP_DEV_SHIFT(d, fs) ((fs) + (((d) % 2) ? 16 : 0)) +#define SIR_MAP_DEV_CONF_MASK(d) (GENMASK(15, 0) << (((d) % 2) ? 16 : 0)) +#define SIR_MAP_DEV_CONF(d, c) ((c) << (((d) % 2) ? 16 : 0)) +#define DEV_ROLE_SLAVE 0 +#define DEV_ROLE_MASTER 1 +#define SIR_MAP_DEV_ROLE(role) ((role) << 14) +#define SIR_MAP_DEV_SLOW BIT(13) +#define SIR_MAP_DEV_PL(l) ((l) << 8) +#define SIR_MAP_PL_MAX GENMASK(4, 0) +#define SIR_MAP_DEV_DA(a) ((a) << 1) +#define SIR_MAP_DEV_ACK BIT(0) + +#define GPIR_WORD(x) (0x200 + ((x) * 4)) +#define GPI_REG(val, id) \ + (((val) >> (((id) % 4) * 8)) & GENMASK(7, 0)) + +#define GPOR_WORD(x) (0x220 + ((x) * 4)) +#define GPO_REG(val, id) \ + (((val) >> (((id) % 4) * 8)) & GENMASK(7, 0)) + +#define ASF_INT_STATUS 0x300 +#define ASF_INT_RAW_STATUS 0x304 +#define ASF_INT_MASK 0x308 +#define ASF_INT_TEST 0x30c +#define ASF_INT_FATAL_SELECT 0x310 +#define ASF_INTEGRITY_ERR BIT(6) +#define ASF_PROTOCOL_ERR BIT(5) +#define ASF_TRANS_TIMEOUT_ERR BIT(4) +#define ASF_CSR_ERR BIT(3) +#define ASF_DAP_ERR BIT(2) +#define ASF_SRAM_UNCORR_ERR BIT(1) +#define ASF_SRAM_CORR_ERR BIT(0) + +#define ASF_SRAM_CORR_FAULT_STATUS 0x320 +#define ASF_SRAM_UNCORR_FAULT_STATUS 0x324 +#define ASF_SRAM_CORR_FAULT_INSTANCE(x) ((x) >> 24) +#define ASF_SRAM_CORR_FAULT_ADDR(x) ((x) & GENMASK(23, 0)) + +#define ASF_SRAM_FAULT_STATS 0x328 +#define ASF_SRAM_FAULT_UNCORR_STATS(x) ((x) >> 16) +#define ASF_SRAM_FAULT_CORR_STATS(x) ((x) & GENMASK(15, 0)) + +#define ASF_TRANS_TOUT_CTRL 0x330 +#define ASF_TRANS_TOUT_EN BIT(31) +#define ASF_TRANS_TOUT_VAL(x) (x) + +#define ASF_TRANS_TOUT_FAULT_MASK 0x334 +#define ASF_TRANS_TOUT_FAULT_STATUS 0x338 +#define ASF_TRANS_TOUT_FAULT_APB BIT(3) +#define ASF_TRANS_TOUT_FAULT_SCL_LOW BIT(2) +#define ASF_TRANS_TOUT_FAULT_SCL_HIGH BIT(1) +#define ASF_TRANS_TOUT_FAULT_FSCL_HIGH BIT(0) + +#define ASF_PROTO_FAULT_MASK 0x340 +#define ASF_PROTO_FAULT_STATUS 0x344 +#define ASF_PROTO_FAULT_SLVSDR_RD_ABORT BIT(31) +#define ASF_PROTO_FAULT_SLVDDR_FAIL BIT(30) +#define ASF_PROTO_FAULT_S(x) BIT(16 + (x)) +#define ASF_PROTO_FAULT_MSTSDR_RD_ABORT BIT(15) +#define ASF_PROTO_FAULT_MSTDDR_FAIL BIT(14) +#define ASF_PROTO_FAULT_M(x) BIT(x) + +struct cdns_i3c_master_caps { + u32 cmdfifodepth; + u32 cmdrfifodepth; + u32 txfifodepth; + u32 rxfifodepth; + u32 ibirfifodepth; +}; + +struct cdns_i3c_cmd { + u32 cmd0; + u32 cmd1; + u32 tx_len; + const void *tx_buf; + u32 rx_len; + void *rx_buf; + u32 error; +}; + +struct cdns_i3c_xfer { + struct list_head node; + struct completion comp; + int ret; + unsigned int ncmds; + struct cdns_i3c_cmd cmds[0]; +}; + +struct cdns_i3c_master { + struct work_struct hj_work; + struct i3c_master_controller base; + u32 free_rr_slots; + unsigned int maxdevs; + struct { + unsigned int num_slots; + struct i3c_dev_desc **slots; + spinlock_t lock; + } ibi; + struct { + struct list_head list; + struct cdns_i3c_xfer *cur; + spinlock_t lock; + } xferqueue; + void __iomem *regs; + struct clk *sysclk; + struct clk *pclk; + struct cdns_i3c_master_caps caps; + unsigned long i3c_scl_lim; +}; + +static inline struct cdns_i3c_master * +to_cdns_i3c_master(struct i3c_master_controller *master) +{ + return container_of(master, struct cdns_i3c_master, base); +} + +static void cdns_i3c_master_wr_to_tx_fifo(struct cdns_i3c_master *master, + const u8 *bytes, int nbytes) +{ + writesl(master->regs + TX_FIFO, bytes, nbytes / 4); + if (nbytes & 3) { + u32 tmp = 0; + + memcpy(&tmp, bytes + (nbytes & ~3), nbytes & 3); + writesl(master->regs + TX_FIFO, &tmp, 1); + } +} + +static void cdns_i3c_master_rd_from_rx_fifo(struct cdns_i3c_master *master, + u8 *bytes, int nbytes) +{ + readsl(master->regs + RX_FIFO, bytes, nbytes / 4); + if (nbytes & 3) { + u32 tmp; + + readsl(master->regs + RX_FIFO, &tmp, 1); + memcpy(bytes + (nbytes & ~3), &tmp, nbytes & 3); + } +} + +static bool cdns_i3c_master_supports_ccc_cmd(struct i3c_master_controller *m, + const struct i3c_ccc_cmd *cmd) +{ + if (cmd->ndests > 1) + return false; + + switch (cmd->id) { + case I3C_CCC_ENEC(true): + case I3C_CCC_ENEC(false): + case I3C_CCC_DISEC(true): + case I3C_CCC_DISEC(false): + case I3C_CCC_ENTAS(0, true): + case I3C_CCC_ENTAS(0, false): + case I3C_CCC_RSTDAA(true): + case I3C_CCC_RSTDAA(false): + case I3C_CCC_ENTDAA: + case I3C_CCC_SETMWL(true): + case I3C_CCC_SETMWL(false): + case I3C_CCC_SETMRL(true): + case I3C_CCC_SETMRL(false): + case I3C_CCC_DEFSLVS: + case I3C_CCC_ENTHDR(0): + case I3C_CCC_SETDASA: + case I3C_CCC_SETNEWDA: + case I3C_CCC_GETMWL: + case I3C_CCC_GETMRL: + case I3C_CCC_GETPID: + case I3C_CCC_GETBCR: + case I3C_CCC_GETDCR: + case I3C_CCC_GETSTATUS: + case I3C_CCC_GETACCMST: + case I3C_CCC_GETMXDS: + case I3C_CCC_GETHDRCAP: + return true; + default: + break; + } + + return false; +} + +static int cdns_i3c_master_disable(struct cdns_i3c_master *master) +{ + u32 status; + + writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN, master->regs + CTRL); + + return readl_poll_timeout(master->regs + MST_STATUS0, status, + status & MST_STATUS0_IDLE, 10, 1000000); +} + +static void cdns_i3c_master_enable(struct cdns_i3c_master *master) +{ + writel(readl(master->regs + CTRL) | CTRL_DEV_EN, master->regs + CTRL); +} + +static struct cdns_i3c_xfer * +cdns_i3c_master_alloc_xfer(struct cdns_i3c_master *master, unsigned int ncmds) +{ + struct cdns_i3c_xfer *xfer; + + xfer = kzalloc(struct_size(xfer, cmds, ncmds), GFP_KERNEL); + if (!xfer) + return NULL; + + INIT_LIST_HEAD(&xfer->node); + xfer->ncmds = ncmds; + xfer->ret = -ETIMEDOUT; + + return xfer; +} + +static void cdns_i3c_master_free_xfer(struct cdns_i3c_xfer *xfer) +{ + kfree(xfer); +} + +static void cdns_i3c_master_start_xfer_locked(struct cdns_i3c_master *master) +{ + struct cdns_i3c_xfer *xfer = master->xferqueue.cur; + unsigned int i; + + if (!xfer) + return; + + writel(MST_INT_CMDD_EMP, master->regs + MST_ICR); + for (i = 0; i < xfer->ncmds; i++) { + struct cdns_i3c_cmd *cmd = &xfer->cmds[i]; + + cdns_i3c_master_wr_to_tx_fifo(master, cmd->tx_buf, + cmd->tx_len); + } + + for (i = 0; i < xfer->ncmds; i++) { + struct cdns_i3c_cmd *cmd = &xfer->cmds[i]; + + writel(cmd->cmd1 | CMD1_FIFO_CMDID(i), + master->regs + CMD1_FIFO); + writel(cmd->cmd0, master->regs + CMD0_FIFO); + } + + writel(readl(master->regs + CTRL) | CTRL_MCS, + master->regs + CTRL); + writel(MST_INT_CMDD_EMP, master->regs + MST_IER); +} + +static void cdns_i3c_master_end_xfer_locked(struct cdns_i3c_master *master, + u32 isr) +{ + struct cdns_i3c_xfer *xfer = master->xferqueue.cur; + int i, ret = 0; + u32 status0; + + if (!xfer) + return; + + if (!(isr & MST_INT_CMDD_EMP)) + return; + + writel(MST_INT_CMDD_EMP, master->regs + MST_IDR); + + for (status0 = readl(master->regs + MST_STATUS0); + !(status0 & MST_STATUS0_CMDR_EMP); + status0 = readl(master->regs + MST_STATUS0)) { + struct cdns_i3c_cmd *cmd; + u32 cmdr, rx_len, id; + + cmdr = readl(master->regs + CMDR); + id = CMDR_CMDID(cmdr); + if (id == CMDR_CMDID_HJACK_DISEC || + id == CMDR_CMDID_HJACK_ENTDAA || + WARN_ON(id >= xfer->ncmds)) + continue; + + cmd = &xfer->cmds[CMDR_CMDID(cmdr)]; + rx_len = min_t(u32, CMDR_XFER_BYTES(cmdr), cmd->rx_len); + cdns_i3c_master_rd_from_rx_fifo(master, cmd->rx_buf, rx_len); + cmd->error = CMDR_ERROR(cmdr); + } + + for (i = 0; i < xfer->ncmds; i++) { + switch (xfer->cmds[i].error) { + case CMDR_NO_ERROR: + break; + + case CMDR_DDR_PREAMBLE_ERROR: + case CMDR_DDR_PARITY_ERROR: + case CMDR_M0_ERROR: + case CMDR_M1_ERROR: + case CMDR_M2_ERROR: + case CMDR_MST_ABORT: + case CMDR_NACK_RESP: + case CMDR_DDR_DROPPED: + ret = -EIO; + break; + + case CMDR_DDR_RX_FIFO_OVF: + case CMDR_DDR_TX_FIFO_UNF: + ret = -ENOSPC; + break; + + case CMDR_INVALID_DA: + default: + ret = -EINVAL; + break; + } + } + + xfer->ret = ret; + complete(&xfer->comp); + + xfer = list_first_entry_or_null(&master->xferqueue.list, + struct cdns_i3c_xfer, node); + if (xfer) + list_del_init(&xfer->node); + + master->xferqueue.cur = xfer; + cdns_i3c_master_start_xfer_locked(master); +} + +static void cdns_i3c_master_queue_xfer(struct cdns_i3c_master *master, + struct cdns_i3c_xfer *xfer) +{ + unsigned long flags; + + init_completion(&xfer->comp); + spin_lock_irqsave(&master->xferqueue.lock, flags); + if (master->xferqueue.cur) { + list_add_tail(&xfer->node, &master->xferqueue.list); + } else { + master->xferqueue.cur = xfer; + cdns_i3c_master_start_xfer_locked(master); + } + spin_unlock_irqrestore(&master->xferqueue.lock, flags); +} + +static void cdns_i3c_master_unqueue_xfer(struct cdns_i3c_master *master, + struct cdns_i3c_xfer *xfer) +{ + unsigned long flags; + + spin_lock_irqsave(&master->xferqueue.lock, flags); + if (master->xferqueue.cur == xfer) { + u32 status; + + writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN, + master->regs + CTRL); + readl_poll_timeout_atomic(master->regs + MST_STATUS0, status, + status & MST_STATUS0_IDLE, 10, + 1000000); + master->xferqueue.cur = NULL; + writel(FLUSH_RX_FIFO | FLUSH_TX_FIFO | FLUSH_CMD_FIFO | + FLUSH_CMD_RESP, + master->regs + FLUSH_CTRL); + writel(MST_INT_CMDD_EMP, master->regs + MST_IDR); + writel(readl(master->regs + CTRL) | CTRL_DEV_EN, + master->regs + CTRL); + } else { + list_del_init(&xfer->node); + } + spin_unlock_irqrestore(&master->xferqueue.lock, flags); +} + +static enum i3c_error_code cdns_i3c_cmd_get_err(struct cdns_i3c_cmd *cmd) +{ + switch (cmd->error) { + case CMDR_M0_ERROR: + return I3C_ERROR_M0; + + case CMDR_M1_ERROR: + return I3C_ERROR_M1; + + case CMDR_M2_ERROR: + case CMDR_NACK_RESP: + return I3C_ERROR_M2; + + default: + break; + } + + return I3C_ERROR_UNKNOWN; +} + +static int cdns_i3c_master_send_ccc_cmd(struct i3c_master_controller *m, + struct i3c_ccc_cmd *cmd) +{ + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_xfer *xfer; + struct cdns_i3c_cmd *ccmd; + int ret; + + xfer = cdns_i3c_master_alloc_xfer(master, 1); + if (!xfer) + return -ENOMEM; + + ccmd = xfer->cmds; + ccmd->cmd1 = CMD1_FIFO_CCC(cmd->id); + ccmd->cmd0 = CMD0_FIFO_IS_CCC | + CMD0_FIFO_PL_LEN(cmd->dests[0].payload.len); + + if (cmd->id & I3C_CCC_DIRECT) + ccmd->cmd0 |= CMD0_FIFO_DEV_ADDR(cmd->dests[0].addr); + + if (cmd->rnw) { + ccmd->cmd0 |= CMD0_FIFO_RNW; + ccmd->rx_buf = cmd->dests[0].payload.data; + ccmd->rx_len = cmd->dests[0].payload.len; + } else { + ccmd->tx_buf = cmd->dests[0].payload.data; + ccmd->tx_len = cmd->dests[0].payload.len; + } + + cdns_i3c_master_queue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000))) + cdns_i3c_master_unqueue_xfer(master, xfer); + + ret = xfer->ret; + cmd->err = cdns_i3c_cmd_get_err(&xfer->cmds[0]); + cdns_i3c_master_free_xfer(xfer); + + return ret; +} + +static int cdns_i3c_master_priv_xfers(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + int txslots = 0, rxslots = 0, i, ret; + struct cdns_i3c_xfer *cdns_xfer; + + for (i = 0; i < nxfers; i++) { + if (xfers[i].len > CMD0_FIFO_PL_LEN_MAX) + return -ENOTSUPP; + } + + if (!nxfers) + return 0; + + if (nxfers > master->caps.cmdfifodepth || + nxfers > master->caps.cmdrfifodepth) + return -ENOTSUPP; + + /* + * First make sure that all transactions (block of transfers separated + * by a STOP marker) fit in the FIFOs. + */ + for (i = 0; i < nxfers; i++) { + if (xfers[i].rnw) + rxslots += DIV_ROUND_UP(xfers[i].len, 4); + else + txslots += DIV_ROUND_UP(xfers[i].len, 4); + } + + if (rxslots > master->caps.rxfifodepth || + txslots > master->caps.txfifodepth) + return -ENOTSUPP; + + cdns_xfer = cdns_i3c_master_alloc_xfer(master, nxfers); + if (!cdns_xfer) + return -ENOMEM; + + for (i = 0; i < nxfers; i++) { + struct cdns_i3c_cmd *ccmd = &cdns_xfer->cmds[i]; + u32 pl_len = xfers[i].len; + + ccmd->cmd0 = CMD0_FIFO_DEV_ADDR(dev->info.dyn_addr) | + CMD0_FIFO_PRIV_XMIT_MODE(XMIT_BURST_WITHOUT_SUBADDR); + + if (xfers[i].rnw) { + ccmd->cmd0 |= CMD0_FIFO_RNW; + ccmd->rx_buf = xfers[i].data.in; + ccmd->rx_len = xfers[i].len; + pl_len++; + } else { + ccmd->tx_buf = xfers[i].data.out; + ccmd->tx_len = xfers[i].len; + } + + ccmd->cmd0 |= CMD0_FIFO_PL_LEN(pl_len); + + if (i < nxfers - 1) + ccmd->cmd0 |= CMD0_FIFO_RSBC; + + if (!i) + ccmd->cmd0 |= CMD0_FIFO_BCH; + } + + cdns_i3c_master_queue_xfer(master, cdns_xfer); + if (!wait_for_completion_timeout(&cdns_xfer->comp, + msecs_to_jiffies(1000))) + cdns_i3c_master_unqueue_xfer(master, cdns_xfer); + + ret = cdns_xfer->ret; + + for (i = 0; i < nxfers; i++) + xfers[i].err = cdns_i3c_cmd_get_err(&cdns_xfer->cmds[i]); + + cdns_i3c_master_free_xfer(cdns_xfer); + + return ret; +} + +static int cdns_i3c_master_i2c_xfers(struct i2c_dev_desc *dev, + const struct i2c_msg *xfers, int nxfers) +{ + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + unsigned int nrxwords = 0, ntxwords = 0; + struct cdns_i3c_xfer *xfer; + int i, ret = 0; + + if (nxfers > master->caps.cmdfifodepth) + return -ENOTSUPP; + + for (i = 0; i < nxfers; i++) { + if (xfers[i].len > CMD0_FIFO_PL_LEN_MAX) + return -ENOTSUPP; + + if (xfers[i].flags & I2C_M_RD) + nrxwords += DIV_ROUND_UP(xfers[i].len, 4); + else + ntxwords += DIV_ROUND_UP(xfers[i].len, 4); + } + + if (ntxwords > master->caps.txfifodepth || + nrxwords > master->caps.rxfifodepth) + return -ENOTSUPP; + + xfer = cdns_i3c_master_alloc_xfer(master, nxfers); + if (!xfer) + return -ENOMEM; + + for (i = 0; i < nxfers; i++) { + struct cdns_i3c_cmd *ccmd = &xfer->cmds[i]; + + ccmd->cmd0 = CMD0_FIFO_DEV_ADDR(xfers[i].addr) | + CMD0_FIFO_PL_LEN(xfers[i].len) | + CMD0_FIFO_PRIV_XMIT_MODE(XMIT_BURST_WITHOUT_SUBADDR); + + if (xfers[i].flags & I2C_M_TEN) + ccmd->cmd0 |= CMD0_FIFO_IS_10B; + + if (xfers[i].flags & I2C_M_RD) { + ccmd->cmd0 |= CMD0_FIFO_RNW; + ccmd->rx_buf = xfers[i].buf; + ccmd->rx_len = xfers[i].len; + } else { + ccmd->tx_buf = xfers[i].buf; + ccmd->tx_len = xfers[i].len; + } + } + + cdns_i3c_master_queue_xfer(master, xfer); + if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000))) + cdns_i3c_master_unqueue_xfer(master, xfer); + + ret = xfer->ret; + cdns_i3c_master_free_xfer(xfer); + + return ret; +} + +static u32 cdns_i3c_master_i2c_funcs(struct i3c_master_controller *m) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR; +} + +struct cdns_i3c_i2c_dev_data { + u16 id; + s16 ibi; + struct i3c_generic_ibi_pool *ibi_pool; +}; + +static u32 prepare_rr0_dev_address(u32 addr) +{ + u32 ret = (addr << 1) & 0xff; + + /* RR0[7:1] = addr[6:0] */ + ret |= (addr & GENMASK(6, 0)) << 1; + + /* RR0[15:13] = addr[9:7] */ + ret |= (addr & GENMASK(9, 7)) << 6; + + /* RR0[0] = ~XOR(addr[6:0]) */ + if (!(hweight8(addr & 0x7f) & 1)) + ret |= 1; + + return ret; +} + +static void cdns_i3c_master_upd_i3c_addr(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + u32 rr; + + rr = prepare_rr0_dev_address(dev->info.dyn_addr ? + dev->info.dyn_addr : + dev->info.static_addr); + writel(DEV_ID_RR0_IS_I3C | rr, master->regs + DEV_ID_RR0(data->id)); +} + +static int cdns_i3c_master_get_rr_slot(struct cdns_i3c_master *master, + u8 dyn_addr) +{ + u32 activedevs, rr; + int i; + + if (!dyn_addr) { + if (!master->free_rr_slots) + return -ENOSPC; + + return ffs(master->free_rr_slots) - 1; + } + + activedevs = readl(master->regs + DEVS_CTRL) & + DEVS_CTRL_DEVS_ACTIVE_MASK; + + for (i = 1; i <= master->maxdevs; i++) { + if (!(BIT(i) & activedevs)) + continue; + + rr = readl(master->regs + DEV_ID_RR0(i)); + if (!(rr & DEV_ID_RR0_IS_I3C) || + DEV_ID_RR0_GET_DEV_ADDR(rr) != dyn_addr) + continue; + + return i; + } + + return -EINVAL; +} + +static int cdns_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, + u8 old_dyn_addr) +{ + cdns_i3c_master_upd_i3c_addr(dev); + + return 0; +} + +static int cdns_i3c_master_attach_i3c_dev(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data; + int slot; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + slot = cdns_i3c_master_get_rr_slot(master, dev->info.dyn_addr); + if (slot < 0) { + kfree(data); + return slot; + } + + data->ibi = -1; + data->id = slot; + i3c_dev_set_master_data(dev, data); + master->free_rr_slots &= ~BIT(slot); + + if (!dev->info.dyn_addr) { + cdns_i3c_master_upd_i3c_addr(dev); + writel(readl(master->regs + DEVS_CTRL) | + DEVS_CTRL_DEV_ACTIVE(data->id), + master->regs + DEVS_CTRL); + } + + return 0; +} + +static void cdns_i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + + writel(readl(master->regs + DEVS_CTRL) | + DEVS_CTRL_DEV_CLR(data->id), + master->regs + DEVS_CTRL); + + i3c_dev_set_master_data(dev, NULL); + master->free_rr_slots |= BIT(data->id); + kfree(data); +} + +static int cdns_i3c_master_attach_i2c_dev(struct i2c_dev_desc *dev) +{ + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data; + int slot; + + slot = cdns_i3c_master_get_rr_slot(master, 0); + if (slot < 0) + return slot; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->id = slot; + master->free_rr_slots &= ~BIT(slot); + i2c_dev_set_master_data(dev, data); + + writel(prepare_rr0_dev_address(dev->boardinfo->base.addr) | + (dev->boardinfo->base.flags & I2C_CLIENT_TEN ? + DEV_ID_RR0_LVR_EXT_ADDR : 0), + master->regs + DEV_ID_RR0(data->id)); + writel(dev->boardinfo->lvr, master->regs + DEV_ID_RR2(data->id)); + writel(readl(master->regs + DEVS_CTRL) | + DEVS_CTRL_DEV_ACTIVE(data->id), + master->regs + DEVS_CTRL); + + return 0; +} + +static void cdns_i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev) +{ + struct i3c_master_controller *m = i2c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i2c_dev_get_master_data(dev); + + writel(readl(master->regs + DEVS_CTRL) | + DEVS_CTRL_DEV_CLR(data->id), + master->regs + DEVS_CTRL); + master->free_rr_slots |= BIT(data->id); + + i2c_dev_set_master_data(dev, NULL); + kfree(data); +} + +static void cdns_i3c_master_bus_cleanup(struct i3c_master_controller *m) +{ + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + + cdns_i3c_master_disable(master); +} + +static void cdns_i3c_master_dev_rr_to_info(struct cdns_i3c_master *master, + unsigned int slot, + struct i3c_device_info *info) +{ + u32 rr; + + memset(info, 0, sizeof(*info)); + rr = readl(master->regs + DEV_ID_RR0(slot)); + info->dyn_addr = DEV_ID_RR0_GET_DEV_ADDR(rr); + rr = readl(master->regs + DEV_ID_RR2(slot)); + info->dcr = rr; + info->bcr = rr >> 8; + info->pid = rr >> 16; + info->pid |= (u64)readl(master->regs + DEV_ID_RR1(slot)) << 16; +} + +static void cdns_i3c_master_upd_i3c_scl_lim(struct cdns_i3c_master *master) +{ + struct i3c_master_controller *m = &master->base; + unsigned long i3c_lim_period, pres_step, ncycles; + struct i3c_bus *bus = i3c_master_get_bus(m); + unsigned long new_i3c_scl_lim = 0; + struct i3c_dev_desc *dev; + u32 prescl1, ctrl; + + i3c_bus_for_each_i3cdev(bus, dev) { + unsigned long max_fscl; + + max_fscl = max(I3C_CCC_MAX_SDR_FSCL(dev->info.max_read_ds), + I3C_CCC_MAX_SDR_FSCL(dev->info.max_write_ds)); + switch (max_fscl) { + case I3C_SDR1_FSCL_8MHZ: + max_fscl = 8000000; + break; + case I3C_SDR2_FSCL_6MHZ: + max_fscl = 6000000; + break; + case I3C_SDR3_FSCL_4MHZ: + max_fscl = 4000000; + break; + case I3C_SDR4_FSCL_2MHZ: + max_fscl = 2000000; + break; + case I3C_SDR0_FSCL_MAX: + default: + max_fscl = 0; + break; + } + + if (max_fscl && + (new_i3c_scl_lim > max_fscl || !new_i3c_scl_lim)) + new_i3c_scl_lim = max_fscl; + } + + /* Only update PRESCL_CTRL1 if the I3C SCL limitation has changed. */ + if (new_i3c_scl_lim == master->i3c_scl_lim) + return; + master->i3c_scl_lim = new_i3c_scl_lim; + if (!new_i3c_scl_lim) + return; + pres_step = 1000000000UL / (bus->scl_rate.i3c * 4); + + /* Configure PP_LOW to meet I3C slave limitations. */ + prescl1 = readl(master->regs + PRESCL_CTRL1) & + ~PRESCL_CTRL1_PP_LOW_MASK; + ctrl = readl(master->regs + CTRL); + + i3c_lim_period = DIV_ROUND_UP(1000000000, master->i3c_scl_lim); + ncycles = DIV_ROUND_UP(i3c_lim_period, pres_step); + if (ncycles < 4) + ncycles = 0; + else + ncycles -= 4; + + prescl1 |= PRESCL_CTRL1_PP_LOW(ncycles); + + /* Disable I3C master before updating PRESCL_CTRL1. */ + if (ctrl & CTRL_DEV_EN) + cdns_i3c_master_disable(master); + + writel(prescl1, master->regs + PRESCL_CTRL1); + + if (ctrl & CTRL_DEV_EN) + cdns_i3c_master_enable(master); +} + +static int cdns_i3c_master_do_daa(struct i3c_master_controller *m) +{ + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + u32 olddevs, newdevs; + int ret, slot; + u8 addrs[MAX_DEVS] = { }; + u8 last_addr = 0; + + olddevs = readl(master->regs + DEVS_CTRL) & DEVS_CTRL_DEVS_ACTIVE_MASK; + + /* Prepare RR slots before launching DAA. */ + for (slot = 1; slot <= master->maxdevs; slot++) { + if (olddevs & BIT(slot)) + continue; + + ret = i3c_master_get_free_addr(m, last_addr + 1); + if (ret < 0) + return -ENOSPC; + + last_addr = ret; + addrs[slot] = last_addr; + writel(prepare_rr0_dev_address(last_addr) | DEV_ID_RR0_IS_I3C, + master->regs + DEV_ID_RR0(slot)); + writel(0, master->regs + DEV_ID_RR1(slot)); + writel(0, master->regs + DEV_ID_RR2(slot)); + } + + ret = i3c_master_entdaa_locked(&master->base); + if (ret && ret != I3C_ERROR_M2) + return ret; + + newdevs = readl(master->regs + DEVS_CTRL) & DEVS_CTRL_DEVS_ACTIVE_MASK; + newdevs &= ~olddevs; + + /* + * Clear all retaining registers filled during DAA. We already + * have the addressed assigned to them in the addrs array. + */ + for (slot = 1; slot <= master->maxdevs; slot++) { + if (newdevs & BIT(slot)) + i3c_master_add_i3c_dev_locked(m, addrs[slot]); + } + + /* + * Clear slots that ended up not being used. Can be caused by I3C + * device creation failure or when the I3C device was already known + * by the system but with a different address (in this case the device + * already has a slot and does not need a new one). + */ + writel(readl(master->regs + DEVS_CTRL) | + master->free_rr_slots << DEVS_CTRL_DEV_CLR_SHIFT, + master->regs + DEVS_CTRL); + + i3c_master_defslvs_locked(&master->base); + + cdns_i3c_master_upd_i3c_scl_lim(master); + + /* Unmask Hot-Join and Mastership request interrupts. */ + i3c_master_enec_locked(m, I3C_BROADCAST_ADDR, + I3C_CCC_EVENT_HJ | I3C_CCC_EVENT_MR); + + return 0; +} + +static int cdns_i3c_master_bus_init(struct i3c_master_controller *m) +{ + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + unsigned long pres_step, sysclk_rate, max_i2cfreq; + struct i3c_bus *bus = i3c_master_get_bus(m); + u32 ctrl, prescl0, prescl1, pres, low; + struct i3c_device_info info = { }; + int ret, ncycles; + + switch (bus->mode) { + case I3C_BUS_MODE_PURE: + ctrl = CTRL_PURE_BUS_MODE; + break; + + case I3C_BUS_MODE_MIXED_FAST: + ctrl = CTRL_MIXED_FAST_BUS_MODE; + break; + + case I3C_BUS_MODE_MIXED_SLOW: + ctrl = CTRL_MIXED_SLOW_BUS_MODE; + break; + + default: + return -EINVAL; + } + + sysclk_rate = clk_get_rate(master->sysclk); + if (!sysclk_rate) + return -EINVAL; + + pres = DIV_ROUND_UP(sysclk_rate, (bus->scl_rate.i3c * 4)) - 1; + if (pres > PRESCL_CTRL0_MAX) + return -ERANGE; + + bus->scl_rate.i3c = sysclk_rate / ((pres + 1) * 4); + + prescl0 = PRESCL_CTRL0_I3C(pres); + + low = ((I3C_BUS_TLOW_OD_MIN_NS * sysclk_rate) / (pres + 1)) - 2; + prescl1 = PRESCL_CTRL1_OD_LOW(low); + + max_i2cfreq = bus->scl_rate.i2c; + + pres = (sysclk_rate / (max_i2cfreq * 5)) - 1; + if (pres > PRESCL_CTRL0_MAX) + return -ERANGE; + + bus->scl_rate.i2c = sysclk_rate / ((pres + 1) * 5); + + prescl0 |= PRESCL_CTRL0_I2C(pres); + writel(prescl0, master->regs + PRESCL_CTRL0); + + /* Calculate OD and PP low. */ + pres_step = 1000000000 / (bus->scl_rate.i3c * 4); + ncycles = DIV_ROUND_UP(I3C_BUS_TLOW_OD_MIN_NS, pres_step) - 2; + if (ncycles < 0) + ncycles = 0; + prescl1 = PRESCL_CTRL1_OD_LOW(ncycles); + writel(prescl1, master->regs + PRESCL_CTRL1); + + /* Get an address for the master. */ + ret = i3c_master_get_free_addr(m, 0); + if (ret < 0) + return ret; + + writel(prepare_rr0_dev_address(ret) | DEV_ID_RR0_IS_I3C, + master->regs + DEV_ID_RR0(0)); + + cdns_i3c_master_dev_rr_to_info(master, 0, &info); + if (info.bcr & I3C_BCR_HDR_CAP) + info.hdr_cap = I3C_CCC_HDR_MODE(I3C_HDR_DDR); + + ret = i3c_master_set_info(&master->base, &info); + if (ret) + return ret; + + /* + * Enable Hot-Join, and, when a Hot-Join request happens, disable all + * events coming from this device. + * + * We will issue ENTDAA afterwards from the threaded IRQ handler. + */ + ctrl |= CTRL_HJ_ACK | CTRL_HJ_DISEC | CTRL_HALT_EN | CTRL_MCS_EN; + writel(ctrl, master->regs + CTRL); + + cdns_i3c_master_enable(master); + + return 0; +} + +static void cdns_i3c_master_handle_ibi(struct cdns_i3c_master *master, + u32 ibir) +{ + struct cdns_i3c_i2c_dev_data *data; + bool data_consumed = false; + struct i3c_ibi_slot *slot; + u32 id = IBIR_SLVID(ibir); + struct i3c_dev_desc *dev; + size_t nbytes; + u8 *buf; + + /* + * FIXME: maybe we should report the FIFO OVF errors to the upper + * layer. + */ + if (id >= master->ibi.num_slots || (ibir & IBIR_ERROR)) + goto out; + + dev = master->ibi.slots[id]; + spin_lock(&master->ibi.lock); + + data = i3c_dev_get_master_data(dev); + slot = i3c_generic_ibi_get_free_slot(data->ibi_pool); + if (!slot) + goto out_unlock; + + buf = slot->data; + + nbytes = IBIR_XFER_BYTES(ibir); + readsl(master->regs + IBI_DATA_FIFO, buf, nbytes / 4); + if (nbytes % 3) { + u32 tmp = __raw_readl(master->regs + IBI_DATA_FIFO); + + memcpy(buf + (nbytes & ~3), &tmp, nbytes & 3); + } + + slot->len = min_t(unsigned int, IBIR_XFER_BYTES(ibir), + dev->ibi->max_payload_len); + i3c_master_queue_ibi(dev, slot); + data_consumed = true; + +out_unlock: + spin_unlock(&master->ibi.lock); + +out: + /* Consume data from the FIFO if it's not been done already. */ + if (!data_consumed) { + int i; + + for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4) + readl(master->regs + IBI_DATA_FIFO); + } +} + +static void cnds_i3c_master_demux_ibis(struct cdns_i3c_master *master) +{ + u32 status0; + + writel(MST_INT_IBIR_THR, master->regs + MST_ICR); + + for (status0 = readl(master->regs + MST_STATUS0); + !(status0 & MST_STATUS0_IBIR_EMP); + status0 = readl(master->regs + MST_STATUS0)) { + u32 ibir = readl(master->regs + IBIR); + + switch (IBIR_TYPE(ibir)) { + case IBIR_TYPE_IBI: + cdns_i3c_master_handle_ibi(master, ibir); + break; + + case IBIR_TYPE_HJ: + WARN_ON(IBIR_XFER_BYTES(ibir) || (ibir & IBIR_ERROR)); + queue_work(master->base.wq, &master->hj_work); + break; + + case IBIR_TYPE_MR: + WARN_ON(IBIR_XFER_BYTES(ibir) || (ibir & IBIR_ERROR)); + default: + break; + } + } +} + +static irqreturn_t cdns_i3c_master_interrupt(int irq, void *data) +{ + struct cdns_i3c_master *master = data; + u32 status; + + status = readl(master->regs + MST_ISR); + if (!(status & readl(master->regs + MST_IMR))) + return IRQ_NONE; + + spin_lock(&master->xferqueue.lock); + cdns_i3c_master_end_xfer_locked(master, status); + spin_unlock(&master->xferqueue.lock); + + if (status & MST_INT_IBIR_THR) + cnds_i3c_master_demux_ibis(master); + + return IRQ_HANDLED; +} + +static int cdns_i3c_master_disable_ibi(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + unsigned long flags; + u32 sirmap; + int ret; + + ret = i3c_master_disec_locked(m, dev->info.dyn_addr, + I3C_CCC_EVENT_SIR); + if (ret) + return ret; + + spin_lock_irqsave(&master->ibi.lock, flags); + sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi)); + sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi); + sirmap |= SIR_MAP_DEV_CONF(data->ibi, + SIR_MAP_DEV_DA(I3C_BROADCAST_ADDR)); + writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi)); + spin_unlock_irqrestore(&master->ibi.lock, flags); + + return ret; +} + +static int cdns_i3c_master_enable_ibi(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + unsigned long flags; + u32 sircfg, sirmap; + int ret; + + spin_lock_irqsave(&master->ibi.lock, flags); + sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi)); + sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi); + sircfg = SIR_MAP_DEV_ROLE(dev->info.bcr >> 6) | + SIR_MAP_DEV_DA(dev->info.dyn_addr) | + SIR_MAP_DEV_PL(dev->info.max_ibi_len) | + SIR_MAP_DEV_ACK; + + if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) + sircfg |= SIR_MAP_DEV_SLOW; + + sirmap |= SIR_MAP_DEV_CONF(data->ibi, sircfg); + writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi)); + spin_unlock_irqrestore(&master->ibi.lock, flags); + + ret = i3c_master_enec_locked(m, dev->info.dyn_addr, + I3C_CCC_EVENT_SIR); + if (ret) { + spin_lock_irqsave(&master->ibi.lock, flags); + sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi)); + sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi); + sirmap |= SIR_MAP_DEV_CONF(data->ibi, + SIR_MAP_DEV_DA(I3C_BROADCAST_ADDR)); + writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi)); + spin_unlock_irqrestore(&master->ibi.lock, flags); + } + + return ret; +} + +static int cdns_i3c_master_request_ibi(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + unsigned long flags; + unsigned int i; + + data->ibi_pool = i3c_generic_ibi_alloc_pool(dev, req); + if (IS_ERR(data->ibi_pool)) + return PTR_ERR(data->ibi_pool); + + spin_lock_irqsave(&master->ibi.lock, flags); + for (i = 0; i < master->ibi.num_slots; i++) { + if (!master->ibi.slots[i]) { + data->ibi = i; + master->ibi.slots[i] = dev; + break; + } + } + spin_unlock_irqrestore(&master->ibi.lock, flags); + + if (i < master->ibi.num_slots) + return 0; + + i3c_generic_ibi_free_pool(data->ibi_pool); + data->ibi_pool = NULL; + + return -ENOSPC; +} + +static void cdns_i3c_master_free_ibi(struct i3c_dev_desc *dev) +{ + struct i3c_master_controller *m = i3c_dev_get_master(dev); + struct cdns_i3c_master *master = to_cdns_i3c_master(m); + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + unsigned long flags; + + spin_lock_irqsave(&master->ibi.lock, flags); + master->ibi.slots[data->ibi] = NULL; + data->ibi = -1; + spin_unlock_irqrestore(&master->ibi.lock, flags); + + i3c_generic_ibi_free_pool(data->ibi_pool); +} + +static void cdns_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot) +{ + struct cdns_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev); + + i3c_generic_ibi_recycle_slot(data->ibi_pool, slot); +} + +static const struct i3c_master_controller_ops cdns_i3c_master_ops = { + .bus_init = cdns_i3c_master_bus_init, + .bus_cleanup = cdns_i3c_master_bus_cleanup, + .do_daa = cdns_i3c_master_do_daa, + .attach_i3c_dev = cdns_i3c_master_attach_i3c_dev, + .reattach_i3c_dev = cdns_i3c_master_reattach_i3c_dev, + .detach_i3c_dev = cdns_i3c_master_detach_i3c_dev, + .attach_i2c_dev = cdns_i3c_master_attach_i2c_dev, + .detach_i2c_dev = cdns_i3c_master_detach_i2c_dev, + .supports_ccc_cmd = cdns_i3c_master_supports_ccc_cmd, + .send_ccc_cmd = cdns_i3c_master_send_ccc_cmd, + .priv_xfers = cdns_i3c_master_priv_xfers, + .i2c_xfers = cdns_i3c_master_i2c_xfers, + .i2c_funcs = cdns_i3c_master_i2c_funcs, + .enable_ibi = cdns_i3c_master_enable_ibi, + .disable_ibi = cdns_i3c_master_disable_ibi, + .request_ibi = cdns_i3c_master_request_ibi, + .free_ibi = cdns_i3c_master_free_ibi, + .recycle_ibi_slot = cdns_i3c_master_recycle_ibi_slot, +}; + +static void cdns_i3c_master_hj(struct work_struct *work) +{ + struct cdns_i3c_master *master = container_of(work, + struct cdns_i3c_master, + hj_work); + + i3c_master_do_daa(&master->base); +} + +static int cdns_i3c_master_probe(struct platform_device *pdev) +{ + struct cdns_i3c_master *master; + struct resource *res; + int ret, irq; + u32 val; + + master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL); + if (!master) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + master->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(master->regs)) + return PTR_ERR(master->regs); + + master->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(master->pclk)) + return PTR_ERR(master->pclk); + + master->sysclk = devm_clk_get(&pdev->dev, "sysclk"); + if (IS_ERR(master->pclk)) + return PTR_ERR(master->pclk); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = clk_prepare_enable(master->pclk); + if (ret) + return ret; + + ret = clk_prepare_enable(master->sysclk); + if (ret) + goto err_disable_pclk; + + if (readl(master->regs + DEV_ID) != DEV_ID_I3C_MASTER) { + ret = -EINVAL; + goto err_disable_sysclk; + } + + spin_lock_init(&master->xferqueue.lock); + INIT_LIST_HEAD(&master->xferqueue.list); + + INIT_WORK(&master->hj_work, cdns_i3c_master_hj); + writel(0xffffffff, master->regs + MST_IDR); + writel(0xffffffff, master->regs + SLV_IDR); + ret = devm_request_irq(&pdev->dev, irq, cdns_i3c_master_interrupt, 0, + dev_name(&pdev->dev), master); + if (ret) + goto err_disable_sysclk; + + platform_set_drvdata(pdev, master); + + val = readl(master->regs + CONF_STATUS0); + + /* Device ID0 is reserved to describe this master. */ + master->maxdevs = CONF_STATUS0_DEVS_NUM(val); + master->free_rr_slots = GENMASK(master->maxdevs, 1); + + val = readl(master->regs + CONF_STATUS1); + master->caps.cmdfifodepth = CONF_STATUS1_CMD_DEPTH(val); + master->caps.rxfifodepth = CONF_STATUS1_RX_DEPTH(val); + master->caps.txfifodepth = CONF_STATUS1_TX_DEPTH(val); + master->caps.ibirfifodepth = CONF_STATUS0_IBIR_DEPTH(val); + master->caps.cmdrfifodepth = CONF_STATUS0_CMDR_DEPTH(val); + + spin_lock_init(&master->ibi.lock); + master->ibi.num_slots = CONF_STATUS1_IBI_HW_RES(val); + master->ibi.slots = devm_kcalloc(&pdev->dev, master->ibi.num_slots, + sizeof(*master->ibi.slots), + GFP_KERNEL); + if (!master->ibi.slots) + goto err_disable_sysclk; + + writel(IBIR_THR(1), master->regs + CMD_IBI_THR_CTRL); + writel(MST_INT_IBIR_THR, master->regs + MST_IER); + writel(DEVS_CTRL_DEV_CLR_ALL, master->regs + DEVS_CTRL); + + ret = i3c_master_register(&master->base, &pdev->dev, + &cdns_i3c_master_ops, false); + if (ret) + goto err_disable_sysclk; + + return 0; + +err_disable_sysclk: + clk_disable_unprepare(master->sysclk); + +err_disable_pclk: + clk_disable_unprepare(master->pclk); + + return ret; +} + +static int cdns_i3c_master_remove(struct platform_device *pdev) +{ + struct cdns_i3c_master *master = platform_get_drvdata(pdev); + int ret; + + ret = i3c_master_unregister(&master->base); + if (ret) + return ret; + + clk_disable_unprepare(master->sysclk); + clk_disable_unprepare(master->pclk); + + return 0; +} + +static const struct of_device_id cdns_i3c_master_of_ids[] = { + { .compatible = "cdns,i3c-master" }, + { /* sentinel */ }, +}; + +static struct platform_driver cdns_i3c_master = { + .probe = cdns_i3c_master_probe, + .remove = cdns_i3c_master_remove, + .driver = { + .name = "cdns-i3c-master", + .of_match_table = cdns_i3c_master_of_ids, + }, +}; +module_platform_driver(cdns_i3c_master); + +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>"); +MODULE_DESCRIPTION("Cadence I3C master driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cdns-i3c-master"); diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h new file mode 100644 index 000000000000..73b0982cc519 --- /dev/null +++ b/include/linux/i3c/ccc.h @@ -0,0 +1,385 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_CCC_H +#define I3C_CCC_H + +#include <linux/bitops.h> +#include <linux/i3c/device.h> + +/* I3C CCC (Common Command Codes) related definitions */ +#define I3C_CCC_DIRECT BIT(7) + +#define I3C_CCC_ID(id, broadcast) \ + ((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT)) + +/* Commands valid in both broadcast and unicast modes */ +#define I3C_CCC_ENEC(broadcast) I3C_CCC_ID(0x0, broadcast) +#define I3C_CCC_DISEC(broadcast) I3C_CCC_ID(0x1, broadcast) +#define I3C_CCC_ENTAS(as, broadcast) I3C_CCC_ID(0x2 + (as), broadcast) +#define I3C_CCC_RSTDAA(broadcast) I3C_CCC_ID(0x6, broadcast) +#define I3C_CCC_SETMWL(broadcast) I3C_CCC_ID(0x9, broadcast) +#define I3C_CCC_SETMRL(broadcast) I3C_CCC_ID(0xa, broadcast) +#define I3C_CCC_SETXTIME(broadcast) ((broadcast) ? 0x28 : 0x98) +#define I3C_CCC_VENDOR(id, broadcast) ((id) + ((broadcast) ? 0x61 : 0xe0)) + +/* Broadcast-only commands */ +#define I3C_CCC_ENTDAA I3C_CCC_ID(0x7, true) +#define I3C_CCC_DEFSLVS I3C_CCC_ID(0x8, true) +#define I3C_CCC_ENTTM I3C_CCC_ID(0xb, true) +#define I3C_CCC_ENTHDR(x) I3C_CCC_ID(0x20 + (x), true) + +/* Unicast-only commands */ +#define I3C_CCC_SETDASA I3C_CCC_ID(0x7, false) +#define I3C_CCC_SETNEWDA I3C_CCC_ID(0x8, false) +#define I3C_CCC_GETMWL I3C_CCC_ID(0xb, false) +#define I3C_CCC_GETMRL I3C_CCC_ID(0xc, false) +#define I3C_CCC_GETPID I3C_CCC_ID(0xd, false) +#define I3C_CCC_GETBCR I3C_CCC_ID(0xe, false) +#define I3C_CCC_GETDCR I3C_CCC_ID(0xf, false) +#define I3C_CCC_GETSTATUS I3C_CCC_ID(0x10, false) +#define I3C_CCC_GETACCMST I3C_CCC_ID(0x11, false) +#define I3C_CCC_SETBRGTGT I3C_CCC_ID(0x13, false) +#define I3C_CCC_GETMXDS I3C_CCC_ID(0x14, false) +#define I3C_CCC_GETHDRCAP I3C_CCC_ID(0x15, false) +#define I3C_CCC_GETXTIME I3C_CCC_ID(0x19, false) + +#define I3C_CCC_EVENT_SIR BIT(0) +#define I3C_CCC_EVENT_MR BIT(1) +#define I3C_CCC_EVENT_HJ BIT(3) + +/** + * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC + * + * @events: bitmask of I3C_CCC_EVENT_xxx events. + * + * Depending on the CCC command, the specific events coming from all devices + * (broadcast version) or a specific device (unicast version) will be + * enabled (ENEC) or disabled (DISEC). + */ +struct i3c_ccc_events { + u8 events; +}; + +/** + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC + * + * @len: maximum write length in bytes + * + * The maximum write length is only applicable to SDR private messages or + * extended Write CCCs (like SETXTIME). + */ +struct i3c_ccc_mwl { + __be16 len; +}; + +/** + * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC + * + * @len: maximum read length in bytes + * @ibi_len: maximum IBI payload length + * + * The maximum read length is only applicable to SDR private messages or + * extended Read CCCs (like GETXTIME). + * The IBI length is only valid if the I3C slave is IBI capable + * (%I3C_BCR_IBI_REQ_CAP is set). + */ +struct i3c_ccc_mrl { + __be16 read_len; + u8 ibi_len; +} __packed; + +/** + * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS + * + * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is + * describing an I2C slave. + * @dcr: DCR value (not applicable to entries describing I2C devices) + * @lvr: LVR value (not applicable to entries describing I3C devices) + * @bcr: BCR value or 0 if this entry is describing an I2C slave + * @static_addr: static address or 0 if the device does not have a static + * address + * + * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc + * descriptors (one entry per I3C/I2C dev controlled by the master). + */ +struct i3c_ccc_dev_desc { + u8 dyn_addr; + union { + u8 dcr; + u8 lvr; + }; + u8 bcr; + u8 static_addr; +}; + +/** + * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC + * + * @count: number of dev descriptors + * @master: descriptor describing the current master + * @slaves: array of descriptors describing slaves controlled by the + * current master + * + * Information passed to the broadcast DEFSLVS to propagate device + * information to all masters currently acting as slaves on the bus. + * This is only meaningful if you have more than one master. + */ +struct i3c_ccc_defslvs { + u8 count; + struct i3c_ccc_dev_desc master; + struct i3c_ccc_dev_desc slaves[0]; +} __packed; + +/** + * enum i3c_ccc_test_mode - enum listing all available test modes + * + * @I3C_CCC_EXIT_TEST_MODE: exit test mode + * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode + */ +enum i3c_ccc_test_mode { + I3C_CCC_EXIT_TEST_MODE, + I3C_CCC_VENDOR_TEST_MODE, +}; + +/** + * struct i3c_ccc_enttm - payload passed to ENTTM CCC + * + * @mode: one of the &enum i3c_ccc_test_mode modes + * + * Information passed to the ENTTM CCC to instruct an I3C device to enter a + * specific test mode. + */ +struct i3c_ccc_enttm { + u8 mode; +}; + +/** + * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs + * + * @addr: dynamic address to assign to an I3C device + * + * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the + * dynamic address of an I3C device. + */ +struct i3c_ccc_setda { + u8 addr; +}; + +/** + * struct i3c_ccc_getpid - payload passed to GETPID CCC + * + * @pid: 48 bits PID in big endian + */ +struct i3c_ccc_getpid { + u8 pid[6]; +}; + +/** + * struct i3c_ccc_getbcr - payload passed to GETBCR CCC + * + * @bcr: BCR (Bus Characteristic Register) value + */ +struct i3c_ccc_getbcr { + u8 bcr; +}; + +/** + * struct i3c_ccc_getdcr - payload passed to GETDCR CCC + * + * @dcr: DCR (Device Characteristic Register) value + */ +struct i3c_ccc_getdcr { + u8 dcr; +}; + +#define I3C_CCC_STATUS_PENDING_INT(status) ((status) & GENMASK(3, 0)) +#define I3C_CCC_STATUS_PROTOCOL_ERROR BIT(5) +#define I3C_CCC_STATUS_ACTIVITY_MODE(status) \ + (((status) & GENMASK(7, 6)) >> 6) + +/** + * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC + * + * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more + * information). + */ +struct i3c_ccc_getstatus { + __be16 status; +}; + +/** + * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC + * + * @newmaster: address of the master taking bus ownership + */ +struct i3c_ccc_getaccmst { + u8 newmaster; +}; + +/** + * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor + * + * @addr: dynamic address of the bridged device + * @id: ID of the slave device behind the bridge + */ +struct i3c_ccc_bridged_slave_desc { + u8 addr; + __be16 id; +} __packed; + +/** + * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC + * + * @count: number of bridged slaves + * @bslaves: bridged slave descriptors + */ +struct i3c_ccc_setbrgtgt { + u8 count; + struct i3c_ccc_bridged_slave_desc bslaves[0]; +} __packed; + +/** + * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers + */ +enum i3c_sdr_max_data_rate { + I3C_SDR0_FSCL_MAX, + I3C_SDR1_FSCL_8MHZ, + I3C_SDR2_FSCL_6MHZ, + I3C_SDR3_FSCL_4MHZ, + I3C_SDR4_FSCL_2MHZ, +}; + +/** + * enum i3c_tsco - clock to data turn-around + */ +enum i3c_tsco { + I3C_TSCO_8NS, + I3C_TSCO_9NS, + I3C_TSCO_10NS, + I3C_TSCO_11NS, + I3C_TSCO_12NS, +}; + +#define I3C_CCC_MAX_SDR_FSCL_MASK GENMASK(2, 0) +#define I3C_CCC_MAX_SDR_FSCL(x) ((x) & I3C_CCC_MAX_SDR_FSCL_MASK) + +/** + * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC + * + * @maxwr: write limitations + * @maxrd: read limitations + * @maxrdturn: maximum read turn-around expressed micro-seconds and + * little-endian formatted + */ +struct i3c_ccc_getmxds { + u8 maxwr; + u8 maxrd; + u8 maxrdturn[3]; +} __packed; + +#define I3C_CCC_HDR_MODE(mode) BIT(mode) + +/** + * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC + * + * @modes: bitmap of supported HDR modes + */ +struct i3c_ccc_gethdrcap { + u8 modes; +} __packed; + +/** + * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands + */ +enum i3c_ccc_setxtime_subcmd { + I3C_CCC_SETXTIME_ST = 0x7f, + I3C_CCC_SETXTIME_DT = 0xbf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb, + I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd, + I3C_CCC_SETXTIME_TPH = 0x3f, + I3C_CCC_SETXTIME_TU = 0x9f, + I3C_CCC_SETXTIME_ODR = 0x8f, +}; + +/** + * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC + * + * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd + * @data: sub-command payload. Amount of data is determined by + * &i3c_ccc_setxtime->subcmd + */ +struct i3c_ccc_setxtime { + u8 subcmd; + u8 data[0]; +} __packed; + +#define I3C_CCC_GETXTIME_SYNC_MODE BIT(0) +#define I3C_CCC_GETXTIME_ASYNC_MODE(x) BIT((x) + 1) +#define I3C_CCC_GETXTIME_OVERFLOW BIT(7) + +/** + * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC + * + * @supported_modes: bitmap describing supported XTIME modes + * @state: current status (enabled mode and overflow status) + * @frequency: slave's internal oscillator frequency in 500KHz steps + * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps + */ +struct i3c_ccc_getxtime { + u8 supported_modes; + u8 state; + u8 frequency; + u8 inaccuracy; +} __packed; + +/** + * struct i3c_ccc_cmd_payload - CCC payload + * + * @len: payload length + * @data: payload data. This buffer must be DMA-able + */ +struct i3c_ccc_cmd_payload { + u16 len; + void *data; +}; + +/** + * struct i3c_ccc_cmd_dest - CCC command destination + * + * @addr: can be an I3C device address or the broadcast address if this is a + * broadcast CCC + * @payload: payload to be sent to this device or broadcasted + */ +struct i3c_ccc_cmd_dest { + u8 addr; + struct i3c_ccc_cmd_payload payload; +}; + +/** + * struct i3c_ccc_cmd - CCC command + * + * @rnw: true if the CCC should retrieve data from the device. Only valid for + * unicast commands + * @id: CCC command id + * @ndests: number of destinations. Should always be one for broadcast commands + * @dests: array of destinations and associated payload for this CCC. Most of + * the time, only one destination is provided + * @err: I3C error code + */ +struct i3c_ccc_cmd { + u8 rnw; + u8 id; + unsigned int ndests; + struct i3c_ccc_cmd_dest *dests; + enum i3c_error_code err; +}; + +#endif /* I3C_CCC_H */ diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h new file mode 100644 index 000000000000..5ecb055fd375 --- /dev/null +++ b/include/linux/i3c/device.h @@ -0,0 +1,331 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_DEV_H +#define I3C_DEV_H + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/kconfig.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +/** + * enum i3c_error_code - I3C error codes + * + * These are the standard error codes as defined by the I3C specification. + * When -EIO is returned by the i3c_device_do_priv_xfers() or + * i3c_device_send_hdr_cmds() one can check the error code in + * &struct_i3c_priv_xfer.err or &struct i3c_hdr_cmd.err to get a better idea of + * what went wrong. + * + * @I3C_ERROR_UNKNOWN: unknown error, usually means the error is not I3C + * related + * @I3C_ERROR_M0: M0 error + * @I3C_ERROR_M1: M1 error + * @I3C_ERROR_M2: M2 error + */ +enum i3c_error_code { + I3C_ERROR_UNKNOWN = 0, + I3C_ERROR_M0 = 1, + I3C_ERROR_M1, + I3C_ERROR_M2, +}; + +/** + * enum i3c_hdr_mode - HDR mode ids + * @I3C_HDR_DDR: DDR mode + * @I3C_HDR_TSP: TSP mode + * @I3C_HDR_TSL: TSL mode + */ +enum i3c_hdr_mode { + I3C_HDR_DDR, + I3C_HDR_TSP, + I3C_HDR_TSL, +}; + +/** + * struct i3c_priv_xfer - I3C SDR private transfer + * @rnw: encodes the transfer direction. true for a read, false for a write + * @len: transfer length in bytes of the transfer + * @data: input/output buffer + * @data.in: input buffer. Must point to a DMA-able buffer + * @data.out: output buffer. Must point to a DMA-able buffer + * @err: I3C error code + */ +struct i3c_priv_xfer { + u8 rnw; + u16 len; + union { + void *in; + const void *out; + } data; + enum i3c_error_code err; +}; + +/** + * enum i3c_dcr - I3C DCR values + * @I3C_DCR_GENERIC_DEVICE: generic I3C device + */ +enum i3c_dcr { + I3C_DCR_GENERIC_DEVICE = 0, +}; + +#define I3C_PID_MANUF_ID(pid) (((pid) & GENMASK_ULL(47, 33)) >> 33) +#define I3C_PID_RND_LOWER_32BITS(pid) (!!((pid) & BIT_ULL(32))) +#define I3C_PID_RND_VAL(pid) ((pid) & GENMASK_ULL(31, 0)) +#define I3C_PID_PART_ID(pid) (((pid) & GENMASK_ULL(31, 16)) >> 16) +#define I3C_PID_INSTANCE_ID(pid) (((pid) & GENMASK_ULL(15, 12)) >> 12) +#define I3C_PID_EXTRA_INFO(pid) ((pid) & GENMASK_ULL(11, 0)) + +#define I3C_BCR_DEVICE_ROLE(bcr) ((bcr) & GENMASK(7, 6)) +#define I3C_BCR_I3C_SLAVE (0 << 6) +#define I3C_BCR_I3C_MASTER (1 << 6) +#define I3C_BCR_HDR_CAP BIT(5) +#define I3C_BCR_BRIDGE BIT(4) +#define I3C_BCR_OFFLINE_CAP BIT(3) +#define I3C_BCR_IBI_PAYLOAD BIT(2) +#define I3C_BCR_IBI_REQ_CAP BIT(1) +#define I3C_BCR_MAX_DATA_SPEED_LIM BIT(0) + +/** + * struct i3c_device_info - I3C device information + * @pid: Provisional ID + * @bcr: Bus Characteristic Register + * @dcr: Device Characteristic Register + * @static_addr: static/I2C address + * @dyn_addr: dynamic address + * @hdr_cap: supported HDR modes + * @max_read_ds: max read speed information + * @max_write_ds: max write speed information + * @max_ibi_len: max IBI payload length + * @max_read_turnaround: max read turn-around time in micro-seconds + * @max_read_len: max private SDR read length in bytes + * @max_write_len: max private SDR write length in bytes + * + * These are all basic information that should be advertised by an I3C device. + * Some of them are optional depending on the device type and device + * capabilities. + * For each I3C slave attached to a master with + * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command + * to retrieve these data. + */ +struct i3c_device_info { + u64 pid; + u8 bcr; + u8 dcr; + u8 static_addr; + u8 dyn_addr; + u8 hdr_cap; + u8 max_read_ds; + u8 max_write_ds; + u8 max_ibi_len; + u32 max_read_turnaround; + u16 max_read_len; + u16 max_write_len; +}; + +/* + * I3C device internals are kept hidden from I3C device users. It's just + * simpler to refactor things when everything goes through getter/setters, and + * I3C device drivers should not have to worry about internal representation + * anyway. + */ +struct i3c_device; + +/* These macros should be used to i3c_device_id entries. */ +#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART) + +#define I3C_DEVICE(_manufid, _partid, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .data = _drvdata, \ + } + +#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART | \ + I3C_MATCH_EXTRA_INFO, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .extra_info = _info, \ + .data = _drvdata, \ + } + +#define I3C_CLASS(_dcr, _drvdata) \ + { \ + .match_flags = I3C_MATCH_DCR, \ + .dcr = _dcr, \ + } + +/** + * struct i3c_driver - I3C device driver + * @driver: inherit from device_driver + * @probe: I3C device probe method + * @remove: I3C device remove method + * @id_table: I3C device match table. Will be used by the framework to decide + * which device to bind to this driver + */ +struct i3c_driver { + struct device_driver driver; + int (*probe)(struct i3c_device *dev); + int (*remove)(struct i3c_device *dev); + const struct i3c_device_id *id_table; +}; + +static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv) +{ + return container_of(drv, struct i3c_driver, driver); +} + +struct device *i3cdev_to_dev(struct i3c_device *i3cdev); +struct i3c_device *dev_to_i3cdev(struct device *dev); + +static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev, + void *data) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + dev_set_drvdata(dev, data); +} + +static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + return dev_get_drvdata(dev); +} + +int i3c_driver_register_with_owner(struct i3c_driver *drv, + struct module *owner); +void i3c_driver_unregister(struct i3c_driver *drv); + +#define i3c_driver_register(__drv) \ + i3c_driver_register_with_owner(__drv, THIS_MODULE) + +/** + * module_i3c_driver() - Register a module providing an I3C driver + * @__drv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * driver. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_driver(__drv) \ + module_driver(__drv, i3c_driver_register, i3c_driver_unregister) + +/** + * i3c_i2c_driver_register() - Register an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function registers both @i2cdev and @i3cdev, and fails if one of these + * registrations fails. This is mainly useful for devices that support both I2C + * and I3C modes. + * Note that when CONFIG_I3C is not enabled, this function only registers the + * I2C driver. + * + * Return: 0 if both registrations succeeds, a negative error code otherwise. + */ +static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + int ret; + + ret = i2c_add_driver(i2cdrv); + if (ret || !IS_ENABLED(CONFIG_I3C)) + return ret; + + ret = i3c_driver_register(i3cdrv); + if (ret) + i2c_del_driver(i2cdrv); + + return ret; +} + +/** + * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function unregisters both @i3cdrv and @i2cdrv. + * Note that when CONFIG_I3C is not enabled, this function only unregisters the + * @i2cdrv. + */ +static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + if (IS_ENABLED(CONFIG_I3C)) + i3c_driver_unregister(i3cdrv); + + i2c_del_driver(i2cdrv); +} + +/** + * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C + * driver + * @__i3cdrv: the I3C driver to register + * @__i2cdrv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * and an I2C driver. + * This macro can be used even if CONFIG_I3C is disabled, in this case, only + * the I2C driver will be registered. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv) \ + module_driver(__i3cdrv, \ + i3c_i2c_driver_register, \ + i3c_i2c_driver_unregister) + +int i3c_device_do_priv_xfers(struct i3c_device *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + +void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info); + +struct i3c_ibi_payload { + unsigned int len; + const void *data; +}; + +/** + * struct i3c_ibi_setup - IBI setup object + * @max_payload_len: maximum length of the payload associated to an IBI. If one + * IBI appears to have a payload that is bigger than this + * number, the IBI will be rejected. + * @num_slots: number of pre-allocated IBI slots. This should be chosen so that + * the system never runs out of IBI slots, otherwise you'll lose + * IBIs. + * @handler: IBI handler, every time an IBI is received. This handler is called + * in a workqueue context. It is allowed to sleep and send new + * messages on the bus, though it's recommended to keep the + * processing done there as fast as possible to avoid delaying + * processing of other queued on the same workqueue. + * + * Temporary structure used to pass information to i3c_device_request_ibi(). + * This object can be allocated on the stack since i3c_device_request_ibi() + * copies every bit of information and do not use it after + * i3c_device_request_ibi() has returned. + */ +struct i3c_ibi_setup { + unsigned int max_payload_len; + unsigned int num_slots; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +int i3c_device_request_ibi(struct i3c_device *dev, + const struct i3c_ibi_setup *setup); +void i3c_device_free_ibi(struct i3c_device *dev); +int i3c_device_enable_ibi(struct i3c_device *dev); +int i3c_device_disable_ibi(struct i3c_device *dev); + +#endif /* I3C_DEV_H */ diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h new file mode 100644 index 000000000000..f13fd8b1dd79 --- /dev/null +++ b/include/linux/i3c/master.h @@ -0,0 +1,648 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_MASTER_H +#define I3C_MASTER_H + +#include <asm/bitsperlong.h> + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/i3c/ccc.h> +#include <linux/i3c/device.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#define I3C_HOT_JOIN_ADDR 0x2 +#define I3C_BROADCAST_ADDR 0x7e +#define I3C_MAX_ADDR GENMASK(6, 0) + +struct i3c_master_controller; +struct i3c_bus; +struct i2c_device; +struct i3c_device; + +/** + * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor + * @node: node element used to insert the slot into the I2C or I3C device + * list + * @master: I3C master that instantiated this device. Will be used to do + * I2C/I3C transfers + * @master_priv: master private data assigned to the device. Can be used to + * add master specific information + * + * This structure is describing common I3C/I2C dev information. + */ +struct i3c_i2c_dev_desc { + struct list_head node; + struct i3c_master_controller *master; + void *master_priv; +}; + +#define I3C_LVR_I2C_INDEX_MASK GENMASK(7, 5) +#define I3C_LVR_I2C_INDEX(x) ((x) << 5) +#define I3C_LVR_I2C_FM_MODE BIT(4) + +#define I2C_MAX_ADDR GENMASK(9, 0) + +/** + * struct i2c_dev_boardinfo - I2C device board information + * @node: used to insert the boardinfo object in the I2C boardinfo list + * @base: regular I2C board information + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * This structure is used to attach board-level information to an I2C device. + * Each I2C device connected on the I3C bus should have one. + */ +struct i2c_dev_boardinfo { + struct list_head node; + struct i2c_board_info base; + u8 lvr; +}; + +/** + * struct i2c_dev_desc - I2C device descriptor + * @common: common part of the I2C device descriptor + * @boardinfo: pointer to the boardinfo attached to this I2C device + * @dev: I2C device object registered to the I2C framework + * + * Each I2C device connected on the bus will have an i2c_dev_desc. + * This object is created by the core and later attached to the controller + * using &struct_i3c_master_controller->ops->attach_i2c_dev(). + * + * &struct_i2c_dev_desc is the internal representation of an I2C device + * connected on an I3C bus. This object is also passed to all + * &struct_i3c_master_controller_ops hooks. + */ +struct i2c_dev_desc { + struct i3c_i2c_dev_desc common; + const struct i2c_dev_boardinfo *boardinfo; + struct i2c_client *dev; +}; + +/** + * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot + * @work: work associated to this slot. The IBI handler will be called from + * there + * @dev: the I3C device that has generated this IBI + * @len: length of the payload associated to this IBI + * @data: payload buffer + * + * An IBI slot is an object pre-allocated by the controller and used when an + * IBI comes in. + * Every time an IBI comes in, the I3C master driver should find a free IBI + * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using + * i3c_master_queue_ibi(). + * + * How IBI slots are allocated is left to the I3C master driver, though, for + * simple kmalloc-based allocation, the generic IBI slot pool can be used. + */ +struct i3c_ibi_slot { + struct work_struct work; + struct i3c_dev_desc *dev; + unsigned int len; + void *data; +}; + +/** + * struct i3c_device_ibi_info - IBI information attached to a specific device + * @all_ibis_handled: used to be informed when no more IBIs are waiting to be + * processed. Used by i3c_device_disable_ibi() to wait for + * all IBIs to be dequeued + * @pending_ibis: count the number of pending IBIs. Each pending IBI has its + * work element queued to the controller workqueue + * @max_payload_len: maximum payload length for an IBI coming from this device. + * this value is specified when calling + * i3c_device_request_ibi() and should not change at run + * time. All messages IBIs exceeding this limit should be + * rejected by the master + * @num_slots: number of IBI slots reserved for this device + * @enabled: reflect the IBI status + * @handler: IBI handler specified at i3c_device_request_ibi() call time. This + * handler will be called from the controller workqueue, and as such + * is allowed to sleep (though it is recommended to process the IBI + * as fast as possible to not stall processing of other IBIs queued + * on the same workqueue). + * New I3C messages can be sent from the IBI handler + * + * The &struct_i3c_device_ibi_info object is allocated when + * i3c_device_request_ibi() is called and attached to a specific device. This + * object is here to manage IBIs coming from a specific I3C device. + * + * Note that this structure is the generic view of the IBI management + * infrastructure. I3C master drivers may have their own internal + * representation which they can associate to the device using + * controller-private data. + */ +struct i3c_device_ibi_info { + struct completion all_ibis_handled; + atomic_t pending_ibis; + unsigned int max_payload_len; + unsigned int num_slots; + unsigned int enabled; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +/** + * struct i3c_dev_boardinfo - I3C device board information + * @node: used to insert the boardinfo object in the I3C boardinfo list + * @init_dyn_addr: initial dynamic address requested by the FW. We provide no + * guarantee that the device will end up using this address, + * but try our best to assign this specific address to the + * device + * @static_addr: static address the I3C device listen on before it's been + * assigned a dynamic address by the master. Will be used during + * bus initialization to assign it a specific dynamic address + * before starting DAA (Dynamic Address Assignment) + * @pid: I3C Provisional ID exposed by the device. This is a unique identifier + * that may be used to attach boardinfo to i3c_dev_desc when the device + * does not have a static address + * @of_node: optional DT node in case the device has been described in the DT + * + * This structure is used to attach board-level information to an I3C device. + * Not all I3C devices connected on the bus will have a boardinfo. It's only + * needed if you want to attach extra resources to a device or assign it a + * specific dynamic address. + */ +struct i3c_dev_boardinfo { + struct list_head node; + u8 init_dyn_addr; + u8 static_addr; + u64 pid; + struct device_node *of_node; +}; + +/** + * struct i3c_dev_desc - I3C device descriptor + * @common: common part of the I3C device descriptor + * @info: I3C device information. Will be automatically filled when you create + * your device with i3c_master_add_i3c_dev_locked() + * @ibi_lock: lock used to protect the &struct_i3c_device->ibi + * @ibi: IBI info attached to a device. Should be NULL until + * i3c_device_request_ibi() is called + * @dev: pointer to the I3C device object exposed to I3C device drivers. This + * should never be accessed from I3C master controller drivers. Only core + * code should manipulate it in when updating the dev <-> desc link or + * when propagating IBI events to the driver + * @boardinfo: pointer to the boardinfo attached to this I3C device + * + * Internal representation of an I3C device. This object is only used by the + * core and passed to I3C master controller drivers when they're requested to + * do some operations on the device. + * The core maintains the link between the internal I3C dev descriptor and the + * object exposed to the I3C device drivers (&struct_i3c_device). + */ +struct i3c_dev_desc { + struct i3c_i2c_dev_desc common; + struct i3c_device_info info; + struct mutex ibi_lock; + struct i3c_device_ibi_info *ibi; + struct i3c_device *dev; + const struct i3c_dev_boardinfo *boardinfo; +}; + +/** + * struct i3c_device - I3C device object + * @dev: device object to register the I3C dev to the device model + * @desc: pointer to an i3c device descriptor object. This link is updated + * every time the I3C device is rediscovered with a different dynamic + * address assigned + * @bus: I3C bus this device is attached to + * + * I3C device object exposed to I3C device drivers. The takes care of linking + * this object to the relevant &struct_i3c_dev_desc one. + * All I3C devs on the I3C bus are represented, including I3C masters. For each + * of them, we have an instance of &struct i3c_device. + */ +struct i3c_device { + struct device dev; + struct i3c_dev_desc *desc; + struct i3c_bus *bus; +}; + +/* + * The I3C specification says the maximum number of devices connected on the + * bus is 11, but this number depends on external parameters like trace length, + * capacitive load per Device, and the types of Devices present on the Bus. + * I3C master can also have limitations, so this number is just here as a + * reference and should be adjusted on a per-controller/per-board basis. + */ +#define I3C_BUS_MAX_DEVS 11 + +#define I3C_BUS_MAX_I3C_SCL_RATE 12900000 +#define I3C_BUS_TYP_I3C_SCL_RATE 12500000 +#define I3C_BUS_I2C_FM_PLUS_SCL_RATE 1000000 +#define I3C_BUS_I2C_FM_SCL_RATE 400000 +#define I3C_BUS_TLOW_OD_MIN_NS 200 + +/** + * enum i3c_bus_mode - I3C bus mode + * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation + * expected + * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on + * the bus. The only impact in this mode is that the + * high SCL pulse has to stay below 50ns to trick I2C + * devices when transmitting I3C frames + * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present + * on the bus + */ +enum i3c_bus_mode { + I3C_BUS_MODE_PURE, + I3C_BUS_MODE_MIXED_FAST, + I3C_BUS_MODE_MIXED_SLOW, +}; + +/** + * enum i3c_addr_slot_status - I3C address slot status + * @I3C_ADDR_SLOT_FREE: address is free + * @I3C_ADDR_SLOT_RSVD: address is reserved + * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device + * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device + * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask + * + * On an I3C bus, addresses are assigned dynamically, and we need to know which + * addresses are free to use and which ones are already assigned. + * + * Addresses marked as reserved are those reserved by the I3C protocol + * (broadcast address, ...). + */ +enum i3c_addr_slot_status { + I3C_ADDR_SLOT_FREE, + I3C_ADDR_SLOT_RSVD, + I3C_ADDR_SLOT_I2C_DEV, + I3C_ADDR_SLOT_I3C_DEV, + I3C_ADDR_SLOT_STATUS_MASK = 3, +}; + +/** + * struct i3c_bus - I3C bus object + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master + * this can change over the time. Will be used to let a master + * know whether it needs to request bus ownership before sending + * a frame or not + * @id: bus ID. Assigned by the framework when register the bus + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and + * ease the DAA (Dynamic Address Assignment) procedure (see + * &enum i3c_addr_slot_status) + * @mode: bus mode (see &enum i3c_bus_mode) + * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv + * transfers + * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers + * @scl_rate: SCL signal rate for I3C and I2C mode + * @devs.i3c: contains a list of I3C device descriptors representing I3C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs.i2c: contains a list of I2C device descriptors representing I2C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs: 2 lists containing all I3C/I2C devices connected to the bus + * @lock: read/write lock on the bus. This is needed to protect against + * operations that have an impact on the whole bus and the devices + * connected to it. For example, when asking slaves to drop their + * dynamic address (RSTDAA CCC), we need to make sure no one is trying + * to send I3C frames to these devices. + * Note that this lock does not protect against concurrency between + * devices: several drivers can send different I3C/I2C frames through + * the same master in parallel. This is the responsibility of the + * master to guarantee that frames are actually sent sequentially and + * not interlaced + * + * The I3C bus is represented with its own object and not implicitly described + * by the I3C master to cope with the multi-master functionality, where one bus + * can be shared amongst several masters, each of them requesting bus ownership + * when they need to. + */ +struct i3c_bus { + struct i3c_dev_desc *cur_master; + int id; + unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG]; + enum i3c_bus_mode mode; + struct { + unsigned long i3c; + unsigned long i2c; + } scl_rate; + struct { + struct list_head i3c; + struct list_head i2c; + } devs; + struct rw_semaphore lock; +}; + +/** + * struct i3c_master_controller_ops - I3C master methods + * @bus_init: hook responsible for the I3C bus initialization. You should at + * least call master_set_info() from there and set the bus mode. + * You can also put controller specific initialization in there. + * This method is mandatory. + * @bus_cleanup: cleanup everything done in + * &i3c_master_controller_ops->bus_init(). + * This method is optional. + * @attach_i3c_dev: called every time an I3C device is attached to the bus. It + * can be after a DAA or when a device is statically declared + * by the FW, in which case it will only have a static address + * and the dynamic address will be 0. + * When this function is called, device information have not + * been retrieved yet. + * This is a good place to attach master controller specific + * data to I3C devices. + * This method is optional. + * @reattach_i3c_dev: called every time an I3C device has its addressed + * changed. It can be because the device has been powered + * down and has lost its address, or it can happen when a + * device had a static address and has been assigned a + * dynamic address with SETDASA. + * This method is optional. + * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure + * should send an ENTDAA CCC command and then add all devices + * discovered sure the DAA using i3c_master_add_i3c_dev_locked(). + * Add devices added with i3c_master_add_i3c_dev_locked() will then be + * attached or re-attached to the controller. + * This method is mandatory. + * @supports_ccc_cmd: should return true if the CCC command is supported, false + * otherwise. + * This method is optional, if not provided the core assumes + * all CCC commands are supported. + * @send_ccc_cmd: send a CCC command + * This method is mandatory. + * @priv_xfers: do one or several private I3C SDR transfers + * This method is mandatory. + * @attach_i2c_dev: called every time an I2C device is attached to the bus. + * This is a good place to attach master controller specific + * data to I2C devices. + * This method is optional. + * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c + * transfers, the core does not guarantee that buffers attached to + * the transfers are DMA-safe. If drivers want to have DMA-safe + * buffers, they should use the i2c_get_dma_safe_msg_buf() + * and i2c_put_dma_safe_msg_buf() helpers provided by the I2C + * framework. + * This method is mandatory. + * @i2c_funcs: expose the supported I2C functionalities. + * This method is mandatory. + * @request_ibi: attach an IBI handler to an I3C device. This implies defining + * an IBI handler and the constraints of the IBI (maximum payload + * length and number of pre-allocated slots). + * Some controllers support less IBI-capable devices than regular + * devices, so this method might return -%EBUSY if there's no + * more space for an extra IBI registration + * This method is optional. + * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI + * should have been disabled with ->disable_irq() prior to that + * This method is mandatory only if ->request_ibi is not NULL. + * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called + * prior to ->enable_ibi(). The controller should first enable + * the IBI on the controller end (for example, unmask the hardware + * IRQ) and then send the ENEC CCC command (with the IBI flag set) + * to the I3C device. + * This method is mandatory only if ->request_ibi is not NULL. + * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI + * flag set and then deactivate the hardware IRQ on the + * controller end. + * This method is mandatory only if ->request_ibi is not NULL. + * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been + * processed by its handler. The IBI slot should be put back + * in the IBI slot pool so that the controller can re-use it + * for a future IBI + * This method is mandatory only if ->request_ibi is not + * NULL. + */ +struct i3c_master_controller_ops { + int (*bus_init)(struct i3c_master_controller *master); + void (*bus_cleanup)(struct i3c_master_controller *master); + int (*attach_i3c_dev)(struct i3c_dev_desc *dev); + int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr); + void (*detach_i3c_dev)(struct i3c_dev_desc *dev); + int (*do_daa)(struct i3c_master_controller *master); + bool (*supports_ccc_cmd)(struct i3c_master_controller *master, + const struct i3c_ccc_cmd *cmd); + int (*send_ccc_cmd)(struct i3c_master_controller *master, + struct i3c_ccc_cmd *cmd); + int (*priv_xfers)(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + int (*attach_i2c_dev)(struct i2c_dev_desc *dev); + void (*detach_i2c_dev)(struct i2c_dev_desc *dev); + int (*i2c_xfers)(struct i2c_dev_desc *dev, + const struct i2c_msg *xfers, int nxfers); + u32 (*i2c_funcs)(struct i3c_master_controller *master); + int (*request_ibi)(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); + void (*free_ibi)(struct i3c_dev_desc *dev); + int (*enable_ibi)(struct i3c_dev_desc *dev); + int (*disable_ibi)(struct i3c_dev_desc *dev); + void (*recycle_ibi_slot)(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot); +}; + +/** + * struct i3c_master_controller - I3C master controller object + * @dev: device to be registered to the device-model + * @this: an I3C device object representing this master. This device will be + * added to the list of I3C devs available on the bus + * @i2c: I2C adapter used for backward compatibility. This adapter is + * registered to the I2C subsystem to be as transparent as possible to + * existing I2C drivers + * @ops: master operations. See &struct i3c_master_controller_ops + * @secondary: true if the master is a secondary master + * @init_done: true when the bus initialization is done + * @boardinfo.i3c: list of I3C boardinfo objects + * @boardinfo.i2c: list of I2C boardinfo objects + * @boardinfo: board-level information attached to devices connected on the bus + * @bus: I3C bus exposed by this master + * @wq: workqueue used to execute IBI handlers. Can also be used by master + * drivers if they need to postpone operations that need to take place + * in a thread context. Typical examples are Hot Join processing which + * requires taking the bus lock in maintenance, which in turn, can only + * be done from a sleep-able context + * + * A &struct i3c_master_controller has to be registered to the I3C subsystem + * through i3c_master_register(). None of &struct i3c_master_controller fields + * should be set manually, just pass appropriate values to + * i3c_master_register(). + */ +struct i3c_master_controller { + struct device dev; + struct i3c_dev_desc *this; + struct i2c_adapter i2c; + const struct i3c_master_controller_ops *ops; + unsigned int secondary : 1; + unsigned int init_done : 1; + struct { + struct list_head i3c; + struct list_head i2c; + } boardinfo; + struct i3c_bus bus; + struct workqueue_struct *wq; +}; + +/** + * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus + * @bus: the I3C bus + * @dev: an I2C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I2C devs present on the bus. + */ +#define i3c_bus_for_each_i2cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i2c, common.node) + +/** + * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus + * @bus: the I3C bus + * @dev: and I3C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I3C devs present on the bus. + */ +#define i3c_bus_for_each_i3cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i3c, common.node) + +int i3c_master_do_i2c_xfers(struct i3c_master_controller *master, + const struct i2c_msg *xfers, + int nxfers); + +int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_entdaa_locked(struct i3c_master_controller *master); +int i3c_master_defslvs_locked(struct i3c_master_controller *master); + +int i3c_master_get_free_addr(struct i3c_master_controller *master, + u8 start_addr); + +int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, + u8 addr); +int i3c_master_do_daa(struct i3c_master_controller *master); + +int i3c_master_set_info(struct i3c_master_controller *master, + const struct i3c_device_info *info); + +int i3c_master_register(struct i3c_master_controller *master, + struct device *parent, + const struct i3c_master_controller_ops *ops, + bool secondary); +int i3c_master_unregister(struct i3c_master_controller *master); + +/** + * i3c_dev_get_master_data() - get master private data attached to an I3C + * device descriptor + * @dev: the I3C device descriptor to get private data from + * + * Return: the private data previously attached with i3c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i3c_dev_set_master_data() - attach master private data to an I3C device + * descriptor + * @dev: the I3C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i3c_dev_get_master_data(). + */ +static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i2c_dev_get_master_data() - get master private data attached to an I2C + * device descriptor + * @dev: the I2C device descriptor to get private data from + * + * Return: the private data previously attached with i2c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i2c_dev_set_master_data() - attach master private data to an I2C device + * descriptor + * @dev: the I2C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i2c_device_get_master_data(). + */ +static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i3c_dev_get_master() - get master used to communicate with a device + * @dev: I3C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i3c_dev_get_master(struct i3c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i2c_dev_get_master() - get master used to communicate with a device + * @dev: I2C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i2c_dev_get_master(struct i2c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i3c_master_get_bus() - get the bus attached to a master + * @master: master object + * + * Return: the I3C bus @master is connected to + */ +static inline struct i3c_bus * +i3c_master_get_bus(struct i3c_master_controller *master) +{ + return &master->bus; +} + +struct i3c_generic_ibi_pool; + +struct i3c_generic_ibi_pool * +i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); +void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool); + +struct i3c_ibi_slot * +i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool); +void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, + struct i3c_ibi_slot *slot); + +void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot); + +struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev); + +#endif /* I3C_MASTER_H */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index a0dcc9b6a723..f9bd2f34b99f 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -448,6 +448,23 @@ struct pci_epf_device_id { kernel_ulong_t driver_data; }; +/* i3c */ + +#define I3C_MATCH_DCR 0x1 +#define I3C_MATCH_MANUF 0x2 +#define I3C_MATCH_PART 0x4 +#define I3C_MATCH_EXTRA_INFO 0x8 + +struct i3c_device_id { + __u8 match_flags; + __u8 dcr; + __u16 manuf_id; + __u16 part_id; + __u16 extra_info; + + const void *data; +}; + /* spi */ #define SPI_NAME_SIZE 32 |