summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt55
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt37
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/bmips.txt8
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt11
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/usb.txt11
-rw-r--r--Documentation/devicetree/bindings/mips/cpu_irq.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--MAINTAINERS26
-rw-r--r--arch/mips/Kbuild.platforms2
-rw-r--r--arch/mips/Kconfig98
-rw-r--r--arch/mips/Kconfig.debug13
-rw-r--r--arch/mips/Makefile1
-rw-r--r--arch/mips/alchemy/common/clock.c7
-rw-r--r--arch/mips/alchemy/common/setup.c6
-rw-r--r--arch/mips/ar7/platform.c24
-rw-r--r--arch/mips/ath25/Kconfig16
-rw-r--r--arch/mips/ath25/Makefile16
-rw-r--r--arch/mips/ath25/Platform6
-rw-r--r--arch/mips/ath25/ar2315.c364
-rw-r--r--arch/mips/ath25/ar2315.h22
-rw-r--r--arch/mips/ath25/ar2315_regs.h410
-rw-r--r--arch/mips/ath25/ar5312.c393
-rw-r--r--arch/mips/ath25/ar5312.h22
-rw-r--r--arch/mips/ath25/ar5312_regs.h224
-rw-r--r--arch/mips/ath25/board.c234
-rw-r--r--arch/mips/ath25/devices.c125
-rw-r--r--arch/mips/ath25/devices.h43
-rw-r--r--arch/mips/ath25/early_printk.c44
-rw-r--r--arch/mips/ath25/prom.c26
-rw-r--r--arch/mips/ath79/irq.c1
-rw-r--r--arch/mips/ath79/prom.c38
-rw-r--r--arch/mips/ath79/setup.c5
-rw-r--r--arch/mips/bcm3384/Makefile1
-rw-r--r--arch/mips/bcm3384/Platform7
-rw-r--r--arch/mips/bcm3384/dma.c81
-rw-r--r--arch/mips/bcm3384/irq.c193
-rw-r--r--arch/mips/bcm3384/setup.c97
-rw-r--r--arch/mips/bcm47xx/bcm47xx_private.h6
-rw-r--r--arch/mips/bcm47xx/irq.c8
-rw-r--r--arch/mips/bcm47xx/nvram.c155
-rw-r--r--arch/mips/bcm47xx/setup.c91
-rw-r--r--arch/mips/bcm47xx/sprom.c82
-rw-r--r--arch/mips/bcm63xx/cpu.c2
-rw-r--r--arch/mips/boot/dts/Makefile1
-rw-r--r--arch/mips/boot/dts/bcm3384.dtsi109
-rw-r--r--arch/mips/boot/dts/bcm93384wvg.dts32
-rw-r--r--arch/mips/cavium-octeon/dma-octeon.c4
-rw-r--r--arch/mips/cavium-octeon/executive/octeon-model.c49
-rw-r--r--arch/mips/configs/bcm3384_defconfig78
-rw-r--r--arch/mips/fw/lib/cmdline.c8
-rw-r--r--arch/mips/include/asm/atomic.h374
-rw-r--r--arch/mips/include/asm/bitops.h35
-rw-r--r--arch/mips/include/asm/bmips.h1
-rw-r--r--arch/mips/include/asm/bootinfo.h13
-rw-r--r--arch/mips/include/asm/clock.h3
-rw-r--r--arch/mips/include/asm/cmpxchg.h27
-rw-r--r--arch/mips/include/asm/compiler.h8
-rw-r--r--arch/mips/include/asm/cpu-features.h4
-rw-r--r--arch/mips/include/asm/cpu.h2
-rw-r--r--arch/mips/include/asm/edac.h6
-rw-r--r--arch/mips/include/asm/elf.h74
-rw-r--r--arch/mips/include/asm/fpu.h49
-rw-r--r--arch/mips/include/asm/futex.h27
-rw-r--r--arch/mips/include/asm/hpet.h73
-rw-r--r--arch/mips/include/asm/io.h8
-rw-r--r--arch/mips/include/asm/irq.h3
-rw-r--r--arch/mips/include/asm/irq_cpu.h4
-rw-r--r--arch/mips/include/asm/mach-ath25/ath25_platform.h73
-rw-r--r--arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h64
-rw-r--r--arch/mips/include/asm/mach-ath25/dma-coherence.h82
-rw-r--r--arch/mips/include/asm/mach-ath25/gpio.h16
-rw-r--r--arch/mips/include/asm/mach-ath25/war.h25
-rw-r--r--arch/mips/include/asm/mach-au1x00/ioremap.h10
-rw-r--r--arch/mips/include/asm/mach-bcm3384/dma-coherence.h48
-rw-r--r--arch/mips/include/asm/mach-bcm3384/war.h24
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h36
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/ioremap.h6
-rw-r--r--arch/mips/include/asm/mach-generic/ioremap.h4
-rw-r--r--arch/mips/include/asm/mach-generic/irq.h6
-rw-r--r--arch/mips/include/asm/mach-lantiq/lantiq.h2
-rw-r--r--arch/mips/include/asm/mach-loongson/boot_param.h49
-rw-r--r--arch/mips/include/asm/mach-loongson/dma-coherence.h6
-rw-r--r--arch/mips/include/asm/mach-loongson/irq.h3
-rw-r--r--arch/mips/include/asm/mach-loongson/loongson.h2
-rw-r--r--arch/mips/include/asm/mach-loongson/loongson_hwmon.h55
-rw-r--r--arch/mips/include/asm/mach-loongson/machine.h2
-rw-r--r--arch/mips/include/asm/mach-loongson/topology.h2
-rw-r--r--arch/mips/include/asm/mach-loongson/workarounds.h7
-rw-r--r--arch/mips/include/asm/mach-loongson1/cpufreq.h23
-rw-r--r--arch/mips/include/asm/mach-loongson1/loongson1.h8
-rw-r--r--arch/mips/include/asm/mach-loongson1/platform.h10
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-clk.h23
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-mux.h67
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-pwm.h29
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-wdt.h11
-rw-r--r--arch/mips/include/asm/mach-malta/irq.h1
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h25
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7620.h64
-rw-r--r--arch/mips/include/asm/mach-ralink/pinmux.h55
-rw-r--r--arch/mips/include/asm/mach-ralink/ralink_regs.h7
-rw-r--r--arch/mips/include/asm/mach-ralink/rt305x.h35
-rw-r--r--arch/mips/include/asm/mach-ralink/rt3883.h16
-rw-r--r--arch/mips/include/asm/mach-sead3/irq.h1
-rw-r--r--arch/mips/include/asm/mach-tx39xx/ioremap.h4
-rw-r--r--arch/mips/include/asm/mach-tx49xx/ioremap.h4
-rw-r--r--arch/mips/include/asm/mips-boards/maltaint.h24
-rw-r--r--arch/mips/include/asm/mips-boards/sead3int.h15
-rw-r--r--arch/mips/include/asm/mips-cm.h2
-rw-r--r--arch/mips/include/asm/mips-cpc.h4
-rw-r--r--arch/mips/include/asm/mipsregs.h43
-rw-r--r--arch/mips/include/asm/octeon/cvmx-cmd-queue.h4
-rw-r--r--arch/mips/include/asm/octeon/cvmx-pow.h69
-rw-r--r--arch/mips/include/asm/octeon/cvmx.h63
-rw-r--r--arch/mips/include/asm/octeon/octeon-feature.h52
-rw-r--r--arch/mips/include/asm/octeon/octeon-model.h3
-rw-r--r--arch/mips/include/asm/paccess.h2
-rw-r--r--arch/mips/include/asm/page.h2
-rw-r--r--arch/mips/include/asm/pci.h2
-rw-r--r--arch/mips/include/asm/pgtable-32.h104
-rw-r--r--arch/mips/include/asm/pgtable-bits.h36
-rw-r--r--arch/mips/include/asm/pgtable.h18
-rw-r--r--arch/mips/include/asm/prom.h1
-rw-r--r--arch/mips/include/asm/r4kcache.h59
-rw-r--r--arch/mips/include/asm/spinlock.h50
-rw-r--r--arch/mips/include/asm/thread_info.h2
-rw-r--r--arch/mips/include/asm/time.h6
-rw-r--r--arch/mips/include/asm/types.h18
-rw-r--r--arch/mips/include/asm/uaccess.h27
-rw-r--r--arch/mips/include/asm/uasm.h2
-rw-r--r--arch/mips/include/uapi/asm/inst.h7
-rw-r--r--arch/mips/jz4740/setup.c2
-rw-r--r--arch/mips/kernel/Makefile10
-rw-r--r--arch/mips/kernel/cevt-gic.c105
-rw-r--r--arch/mips/kernel/cevt-r4k.c6
-rw-r--r--arch/mips/kernel/cpu-probe.c71
-rw-r--r--arch/mips/kernel/crash_dump.c4
-rw-r--r--arch/mips/kernel/csrc-gic.c40
-rw-r--r--arch/mips/kernel/elf.c191
-rw-r--r--arch/mips/kernel/i8259.c24
-rw-r--r--arch/mips/kernel/irq-gic.c402
-rw-r--r--arch/mips/kernel/irq_cpu.c48
-rw-r--r--arch/mips/kernel/mips-cm.c12
-rw-r--r--arch/mips/kernel/mips-cpc.c4
-rw-r--r--arch/mips/kernel/mips_ksyms.c4
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c30
-rw-r--r--arch/mips/kernel/process.c54
-rw-r--r--arch/mips/kernel/prom.c18
-rw-r--r--arch/mips/kernel/setup.c12
-rw-r--r--arch/mips/kernel/signal.c2
-rw-r--r--arch/mips/kernel/smp-bmips.c114
-rw-r--r--arch/mips/kernel/smp-cmp.c2
-rw-r--r--arch/mips/kernel/smp-cps.c6
-rw-r--r--arch/mips/kernel/smp-gic.c2
-rw-r--r--arch/mips/kernel/smp-mt.c6
-rw-r--r--arch/mips/kernel/syscall.c2
-rw-r--r--arch/mips/kernel/traps.c66
-rw-r--r--arch/mips/kernel/vdso.c15
-rw-r--r--arch/mips/lantiq/falcon/sysctrl.c11
-rw-r--r--arch/mips/lantiq/irq.c56
-rw-r--r--arch/mips/lantiq/prom.c18
-rw-r--r--arch/mips/lantiq/xway/Makefile2
-rw-r--r--arch/mips/lantiq/xway/reset.c70
-rw-r--r--arch/mips/lantiq/xway/vmmc.c69
-rw-r--r--arch/mips/lantiq/xway/xrx200_phy_fw.c23
-rw-r--r--arch/mips/lib/iomap.c18
-rw-r--r--arch/mips/lib/memset.S6
-rw-r--r--arch/mips/lib/mips-atomic.c20
-rw-r--r--arch/mips/lib/r3k_dump_tlb.c11
-rw-r--r--arch/mips/lib/strlen_user.S3
-rw-r--r--arch/mips/loongson/Kconfig17
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_pci.c25
-rw-r--r--arch/mips/loongson/common/dma-swiotlb.c14
-rw-r--r--arch/mips/loongson/common/early_printk.c2
-rw-r--r--arch/mips/loongson/common/env.c28
-rw-r--r--arch/mips/loongson/common/gpio.c2
-rw-r--r--arch/mips/loongson/common/init.c1
-rw-r--r--arch/mips/loongson/common/machtype.c23
-rw-r--r--arch/mips/loongson/common/rtc.c2
-rw-r--r--arch/mips/loongson/common/serial.c66
-rw-r--r--arch/mips/loongson/common/setup.c1
-rw-r--r--arch/mips/loongson/common/time.c5
-rw-r--r--arch/mips/loongson/common/uart_base.c30
-rw-r--r--arch/mips/loongson/lemote-2f/irq.c4
-rw-r--r--arch/mips/loongson/lemote-2f/reset.c2
-rw-r--r--arch/mips/loongson/loongson-3/Makefile4
-rw-r--r--arch/mips/loongson/loongson-3/hpet.c257
-rw-r--r--arch/mips/loongson/loongson-3/irq.c16
-rw-r--r--arch/mips/loongson/loongson-3/numa.c12
-rw-r--r--arch/mips/loongson/loongson-3/platform.c43
-rw-r--r--arch/mips/loongson/loongson-3/smp.c70
-rw-r--r--arch/mips/loongson1/Kconfig42
-rw-r--r--arch/mips/loongson1/common/Makefile2
-rw-r--r--arch/mips/loongson1/common/clock.c28
-rw-r--r--arch/mips/loongson1/common/platform.c141
-rw-r--r--arch/mips/loongson1/common/prom.c30
-rw-r--r--arch/mips/loongson1/common/reset.c20
-rw-r--r--arch/mips/loongson1/common/time.c226
-rw-r--r--arch/mips/loongson1/ls1b/board.c12
-rw-r--r--arch/mips/math-emu/cp1emu.c9
-rw-r--r--arch/mips/math-emu/ieee754dp.c2
-rw-r--r--arch/mips/math-emu/ieee754sp.c2
-rw-r--r--arch/mips/mm/Makefile10
-rw-r--r--arch/mips/mm/c-r4k.c43
-rw-r--r--arch/mips/mm/dma-default.c5
-rw-r--r--arch/mips/mm/gup.c2
-rw-r--r--arch/mips/mm/init.c2
-rw-r--r--arch/mips/mm/ioremap.c18
-rw-r--r--arch/mips/mm/sc-r5k.c2
-rw-r--r--arch/mips/mm/tlb-r4k.c2
-rw-r--r--arch/mips/mm/tlbex.c18
-rw-r--r--arch/mips/mm/uasm-mips.c2
-rw-r--r--arch/mips/mm/uasm.c14
-rw-r--r--arch/mips/mti-malta/malta-init.c2
-rw-r--r--arch/mips/mti-malta/malta-int.c327
-rw-r--r--arch/mips/mti-malta/malta-time.c51
-rw-r--r--arch/mips/mti-sead3/sead3-ehci.c8
-rw-r--r--arch/mips/mti-sead3/sead3-int.c131
-rw-r--r--arch/mips/mti-sead3/sead3-net.c14
-rw-r--r--arch/mips/mti-sead3/sead3-platform.c18
-rw-r--r--arch/mips/mti-sead3/sead3-serial.c45
-rw-r--r--arch/mips/mti-sead3/sead3-time.c35
-rw-r--r--arch/mips/oprofile/Makefile1
-rw-r--r--arch/mips/oprofile/backtrace.c5
-rw-r--r--arch/mips/oprofile/common.c11
-rw-r--r--arch/mips/oprofile/op_model_loongson3.c220
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c18
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/ops-bcm63xx.c2
-rw-r--r--arch/mips/pci/ops-nile4.c12
-rw-r--r--arch/mips/pci/ops-pmcmsp.c12
-rw-r--r--arch/mips/pci/pci-ar2315.c511
-rw-r--r--arch/mips/pci/pci-ar71xx.c13
-rw-r--r--arch/mips/pci/pci-ar724x.c23
-rw-r--r--arch/mips/pci/pci-rt2880.c285
-rw-r--r--arch/mips/pci/pci-rt3883.c9
-rw-r--r--arch/mips/pci/pci-tx4939.c2
-rw-r--r--arch/mips/pmcs-msp71xx/msp_prom.c2
-rw-r--r--arch/mips/ralink/Kconfig3
-rw-r--r--arch/mips/ralink/Makefile4
-rw-r--r--arch/mips/ralink/bootrom.c48
-rw-r--r--arch/mips/ralink/clk.c6
-rw-r--r--arch/mips/ralink/common.h19
-rw-r--r--arch/mips/ralink/early_printk.c45
-rw-r--r--arch/mips/ralink/ill_acc.c87
-rw-r--r--arch/mips/ralink/irq.c45
-rw-r--r--arch/mips/ralink/mt7620.c465
-rw-r--r--arch/mips/ralink/of.c32
-rw-r--r--arch/mips/ralink/prom.c1
-rw-r--r--arch/mips/ralink/rt288x.c65
-rw-r--r--arch/mips/ralink/rt305x.c153
-rw-r--r--arch/mips/ralink/rt3883.c174
-rw-r--r--arch/mips/rb532/gpio.c2
-rw-r--r--arch/mips/rb532/prom.c8
-rw-r--r--arch/mips/sgi-ip22/ip22-mc.c6
-rw-r--r--arch/mips/sgi-ip22/ip28-berr.c6
-rw-r--r--arch/mips/sgi-ip27/ip27-klnuma.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-memory.c5
-rw-r--r--arch/mips/sibyte/common/cfe.c8
-rw-r--r--arch/mips/sibyte/swarm/platform.c2
-rw-r--r--arch/mips/sibyte/swarm/rtc_m41t81.c4
-rw-r--r--arch/mips/sibyte/swarm/rtc_xicor1241.c4
-rw-r--r--arch/mips/sibyte/swarm/setup.c2
-rw-r--r--arch/mips/txx9/generic/setup_tx4927.c4
-rw-r--r--arch/mips/txx9/generic/setup_tx4938.c4
-rw-r--r--arch/mips/txx9/generic/setup_tx4939.c4
-rw-r--r--drivers/bcma/driver_mips.c13
-rw-r--r--drivers/clk/clk-ls1x.c109
-rw-r--r--drivers/clocksource/Kconfig5
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/mips-gic-timer.c166
-rw-r--r--drivers/dma/txx9dmac.c2
-rw-r--r--drivers/dma/txx9dmac.h4
-rw-r--r--drivers/irqchip/Kconfig4
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-mips-gic.c789
-rw-r--r--drivers/net/wireless/ath/ath5k/Kconfig14
-rw-r--r--drivers/net/wireless/ath/ath5k/Makefile1
-rw-r--r--drivers/net/wireless/ath/ath5k/ahb.c234
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h28
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c14
-rw-r--r--drivers/net/wireless/ath/ath5k/led.c6
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/ssb/driver_mipscore.c14
-rw-r--r--drivers/tc/tc.c36
-rw-r--r--fs/Kconfig.binfmt3
-rw-r--r--fs/binfmt_elf.c238
-rw-r--r--include/dt-bindings/interrupt-controller/mips-gic.h9
-rw-r--r--include/linux/elf.h5
-rw-r--r--include/linux/irqchip/mips-gic.h (renamed from arch/mips/include/asm/gic.h)267
289 files changed, 9835 insertions, 3443 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
new file mode 100644
index 000000000000..5a65478e5d40
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -0,0 +1,55 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports local (per-processor) interrupts and software-generated
+interrupts which can be used as IPIs. The GIC also includes a free-running
+global timer, per-CPU count/compare timers, and a watchdog.
+
+Required properties:
+- compatible : Should be "mti,gic".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt specifier. Should be 3.
+ - The first cell is the type of interrupt, local or shared.
+ See <include/dt-bindings/interrupt-controller/mips-gic.h>.
+ - The second cell is the GIC interrupt number.
+ - The third cell encodes the interrupt flags.
+ See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+ flags.
+
+Optional properties:
+- reg : Base address and length of the GIC registers. If not present,
+ the base address reported by the hardware GCR_GIC_BASE will be used.
+- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
+ to which the GIC may not route interrupts. Valid values are 2 - 7.
+ This property is ignored if the CPU is started in EIC mode.
+
+Required properties for timer sub-node:
+- compatible : Should be "mti,gic-timer".
+- interrupts : Interrupt for the GIC local timer.
+- clock-frequency : Clock frequency at which the GIC timers operate.
+
+Example:
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ mti,reserved-cpu-vectors = <7>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ uart@18101400 {
+ ...
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
new file mode 100644
index 000000000000..d4e0141d3620
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
@@ -0,0 +1,37 @@
+* Interrupt Controller
+
+Properties:
+- compatible: "brcm,bcm3384-intc"
+
+ Compatibility with BCM3384 and possibly other BCM33xx/BCM63xx SoCs.
+
+- reg: Address/length pairs for each mask/status register set. Length must
+ be 8. If multiple register sets are specified, the first set will
+ handle IRQ offsets 0..31, the second set 32..63, and so on.
+
+- interrupt-controller: This is an interrupt controller.
+
+- #interrupt-cells: Must be <1>. Just a simple IRQ offset; no level/edge
+ or polarity configuration is possible with this controller.
+
+- interrupt-parent: This controller is cascaded from a MIPS CPU HW IRQ, or
+ from another INTC.
+
+- interrupts: The IRQ on the parent controller.
+
+Example:
+ periph_intc: periph_intc@14e00038 {
+ compatible = "brcm,bcm3384-intc";
+
+ /*
+ * IRQs 0..31: mask reg 0x14e00038, status reg 0x14e0003c
+ * IRQs 32..63: mask reg 0x14e00340, status reg 0x14e00344
+ */
+ reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/mips/brcm/bmips.txt b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
new file mode 100644
index 000000000000..8ef71b4085ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
@@ -0,0 +1,8 @@
+* Broadcom MIPS (BMIPS) CPUs
+
+Required properties:
+- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
+ "brcm,bmips5000"
+
+- mips-hpt-frequency: This is common to all CPUs in the system so it lives
+ under the "cpus" node.
diff --git a/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
new file mode 100644
index 000000000000..8a139cb3c0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
@@ -0,0 +1,11 @@
+* Broadcom cable/DSL platforms
+
+SoCs:
+
+Required properties:
+- compatible: "brcm,bcm3384", "brcm,bcm33843"
+
+Boards:
+
+Required properties:
+- compatible: "brcm,bcm93384wvg"
diff --git a/Documentation/devicetree/bindings/mips/brcm/usb.txt b/Documentation/devicetree/bindings/mips/brcm/usb.txt
new file mode 100644
index 000000000000..452c45c7bf29
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/usb.txt
@@ -0,0 +1,11 @@
+* Broadcom USB controllers
+
+Required properties:
+- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci"
+
+ These currently use the generic-ohci and generic-ehci drivers. On some
+ systems, special handling may be needed in the following cases:
+
+ - Restoring state after systemwide power save modes
+ - Sharing PHYs with the USBD (UDC) hardware
+ - Figuring out which controllers are disabled on ASIC bondout variants
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
index 13aa4b62c62a..fc149f326dae 100644
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -1,6 +1,6 @@
MIPS CPU interrupt controller
-On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
IRQs from a devicetree file and create a irq_domain for IRQ controller.
With the irq_domain in place we can describe how the 8 IRQs are wired to the
@@ -36,7 +36,7 @@ Example devicetree:
Example platform irq.c:
static struct of_device_id __initdata of_irq_ids[] = {
- { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
{},
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2417cb0b493b..cc6151c431c8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -101,6 +101,7 @@ mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
+mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
mxicy Macronix International Co., Ltd.
diff --git a/MAINTAINERS b/MAINTAINERS
index 34b4b841da40..e186bf90ed8a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2085,6 +2085,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
+BROADCOM BCM33XX MIPS ARCHITECTURE
+M: Kevin Cernekee <cernekee@gmail.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/bcm3384/*
+F: arch/mips/include/asm/mach-bcm3384/*
+F: arch/mips/kernel/*bmips*
+
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
L: linux-arm-kernel@lists.infradead.org
@@ -2101,6 +2109,12 @@ S: Maintained
F: arch/arm/mach-bcm/bcm63xx.c
F: arch/arm/include/debug/bcm63xx.S
+BROADCOM BCM63XX/BCM33XX UDC DRIVER
+M: Kevin Cernekee <cernekee@gmail.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/gadget/udc/bcm63xx_udc.*
+
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
@@ -2112,6 +2126,18 @@ F: arch/arm/mach-bcm/*brcmstb*
F: arch/arm/boot/dts/bcm7*.dts*
F: drivers/bus/brcmstb_gisb.c
+BROADCOM BMIPS MIPS ARCHITECTURE
+M: Kevin Cernekee <cernekee@gmail.com>
+M: Florian Fainelli <f.fainelli@gmail.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/bmips/*
+F: arch/mips/include/asm/mach-bmips/*
+F: arch/mips/kernel/*bmips*
+F: arch/mips/boot/dts/bcm*.dts*
+F: drivers/irqchip/irq-bcm7*
+F: drivers/irqchip/irq-brcmstb*
+
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Prashant Sreedharan <prashant@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index f5e18bf3275e..e5fc463b36d0 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -2,7 +2,9 @@
platforms += alchemy
platforms += ar7
+platforms += ath25
platforms += ath79
+platforms += bcm3384
platforms += bcm47xx
platforms += bcm63xx
platforms += cavium-octeon
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9536ef912f59..3289969ee423 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -53,6 +53,7 @@ config MIPS
select HAVE_CC_STACKPROTECTOR
select CPU_PM if CPU_IDLE
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+ select ARCH_BINFMT_ELF_STATE
menu "Machine selection"
@@ -62,7 +63,7 @@ choice
config MIPS_ALCHEMY
bool "Alchemy processor based machines"
- select 64BIT_PHYS_ADDR
+ select ARCH_PHYS_ADDR_T_64BIT
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
@@ -96,6 +97,20 @@ config AR7
Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300.
+config ATH25
+ bool "Atheros AR231x/AR531x SoC support"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select IRQ_DOMAIN
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_HAS_EARLY_PRINTK
+ help
+ Support for Atheros AR231x and Atheros AR531x based boards
+
config ATH79
bool "Atheros AR71XX/AR724X/AR913X based boards"
select ARCH_REQUIRE_GPIOLIB
@@ -115,6 +130,32 @@ config ATH79
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+config BCM3384
+ bool "Broadcom BCM3384 based boards"
+ select BOOT_RAW
+ select NO_EXCEPT_FILL
+ select USE_OF
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYNC_R4K
+ select COMMON_CLK
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_CPU_BMIPS5000
+ select SWAP_IO_SPACE
+ select USB_EHCI_BIG_ENDIAN_DESC
+ select USB_EHCI_BIG_ENDIAN_MMIO
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
+ help
+ Support for BCM3384 based boards. BCM3384/BCM33843 is a cable modem
+ chipset with a Linux application processor that is often used to
+ provide Samba services, a CUPS print server, and/or advanced routing
+ features.
+
config BCM47XX
bool "Broadcom BCM47XX based boards"
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -269,6 +310,8 @@ config LANTIQ
select USE_OF
select PINCTRL
select PINCTRL_LANTIQ
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
config LASAT
bool "LASAT Networks platforms"
@@ -315,17 +358,18 @@ config MIPS_MALTA
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
- select CSRC_GIC
+ select CLKSRC_MIPS_GIC
select DMA_MAYBE_COHERENT
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select IRQ_CPU
- select IRQ_GIC
+ select MIPS_GIC
select HW_HAS_PCI
select I8253
select I8259
select MIPS_BONITO64
select MIPS_CPU_SCACHE
+ select MIPS_L1_CACHE_SHIFT_6
select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
@@ -340,6 +384,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MIPS16
@@ -357,12 +402,12 @@ config MIPS_SEAD3
select BUILTIN_DTB
select CEVT_R4K
select CSRC_R4K
- select CSRC_GIC
+ select CLKSRC_MIPS_GIC
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select DMA_NONCOHERENT
select IRQ_CPU
- select IRQ_GIC
+ select MIPS_GIC
select LIBFDT
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
@@ -726,7 +771,7 @@ config MIKROTIK_RB532
config CAVIUM_OCTEON_SOC
bool "Cavium Networks Octeon SoC based boards"
select CEVT_R4K
- select 64BIT_PHYS_ADDR
+ select ARCH_PHYS_ADDR_T_64BIT
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
@@ -768,7 +813,7 @@ config NLM_XLR_BOARD
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
- select 64BIT_PHYS_ADDR
+ select ARCH_PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select DMA_COHERENT
@@ -794,7 +839,7 @@ config NLM_XLP_BOARD
select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
- select 64BIT_PHYS_ADDR
+ select ARCH_PHYS_ADDR_T_64BIT
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
@@ -835,6 +880,7 @@ config MIPS_PARAVIRT
endchoice
source "arch/mips/alchemy/Kconfig"
+source "arch/mips/ath25/Kconfig"
source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
@@ -907,10 +953,6 @@ config CEVT_GT641XX
config CEVT_R4K
bool
-config CEVT_GIC
- select MIPS_CM
- bool
-
config CEVT_SB1250
bool
@@ -926,10 +968,6 @@ config CSRC_IOASIC
config CSRC_R4K
bool
-config CSRC_GIC
- select MIPS_CM
- bool
-
config CSRC_SB1250
bool
@@ -941,7 +979,7 @@ config FW_CFE
bool
config ARCH_DMA_ADDR_T_64BIT
- def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
+ def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT
config DMA_MAYBE_COHERENT
select DMA_NONCOHERENT
@@ -975,6 +1013,7 @@ config SYS_SUPPORTS_HOTPLUG_CPU
config I8259
bool
+ select IRQ_DOMAIN
config MIPS_BONITO64
bool
@@ -1055,6 +1094,7 @@ config MIPS_HUGE_TLB_SUPPORT
config IRQ_CPU
bool
+ select IRQ_DOMAIN
config IRQ_CPU_RM7K
bool
@@ -1071,10 +1111,6 @@ config IRQ_TXX9
config IRQ_GT641XX
bool
-config IRQ_GIC
- select MIPS_CM
- bool
-
config PCI_GT64XXX_PCI0
bool
@@ -1574,6 +1610,7 @@ config CPU_LOONGSON1
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_CPUFREQ
config CPU_BMIPS32_3300
select SMP_UP if SMP
@@ -1586,12 +1623,14 @@ config CPU_BMIPS4350
config CPU_BMIPS4380
bool
+ select MIPS_L1_CACHE_SHIFT_6
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
config CPU_BMIPS5000
bool
select MIPS_CPU_SCACHE
+ select MIPS_L1_CACHE_SHIFT_7
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
@@ -1886,15 +1925,6 @@ config FORCE_MAX_ZONEORDER
The page size is not necessarily 4KB. Keep this in mind
when choosing a value for this option.
-config CEVT_GIC
- bool "Use GIC global counter for clock events"
- depends on IRQ_GIC && !MIPS_SEAD3
- help
- Use the GIC global counter for the clock events. The R4K clock
- event driver is always present, so if the platform ends up not
- detecting a GIC, it will fall back to the R4K timer for the
- generation of clock events.
-
config BOARD_SCACHE
bool
@@ -1908,7 +1938,6 @@ config IP22_CPU_SCACHE
config MIPS_CPU_SCACHE
bool
select BOARD_SCACHE
- select MIPS_L1_CACHE_SHIFT_6
config R5000_CPU_SCACHE
bool
@@ -2095,11 +2124,8 @@ config SB1_PASS_2_1_WORKAROUNDS
default y
-config 64BIT_PHYS_ADDR
- bool
-
config ARCH_PHYS_ADDR_T_64BIT
- def_bool 64BIT_PHYS_ADDR
+ bool
choice
prompt "SmartMIPS or microMIPS ASE support"
@@ -2122,7 +2148,7 @@ config CPU_HAS_SMARTMIPS
here.
config CPU_MICROMIPS
- depends on SYS_SUPPORTS_MICROMIPS
+ depends on 32BIT && SYS_SUPPORTS_MICROMIPS
bool "microMIPS"
help
When this option is enabled the kernel will be built using the
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 3a2b775e8458..88a9f433f6fc 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -122,4 +122,17 @@ config SPINLOCK_TEST
help
Add several files to the debugfs to test spinlock speed.
+config FP32XX_HYBRID_FPRS
+ bool "Run FP32 & FPXX code with hybrid FPRs"
+ depends on MIPS_O32_FP64_SUPPORT
+ help
+ The hybrid FPR scheme is normally used only when a program needs to
+ execute a mix of FP32 & FP64A code, since the trapping & emulation
+ that it entails is expensive. When enabled, this option will lead
+ to the kernel running programs which use the FP32 & FPXX FP ABIs
+ using the hybrid FPR scheme, which can be useful for debugging
+ purposes.
+
+ If unsure, say N.
+
endmenu
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 58076472bdd8..2563a088d3b8 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -380,6 +380,7 @@ define archhelp
echo ' vmlinux.ecoff - ECOFF boot image'
echo ' vmlinux.bin - Raw binary boot image'
echo ' vmlinux.srec - SREC boot image'
+ echo ' vmlinux.32 - 64-bit boot image wrapped in 32bits (IP22/IP32)'
echo ' vmlinuz - Compressed boot(zboot) image'
echo ' vmlinuz.ecoff - ECOFF zboot image'
echo ' vmlinuz.bin - Raw binary zboot image'
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
index d7557cde271a..203e4403c366 100644
--- a/arch/mips/alchemy/common/clock.c
+++ b/arch/mips/alchemy/common/clock.c
@@ -37,7 +37,6 @@
#include <linux/io.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clk-private.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -397,10 +396,10 @@ static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
break;
/* if this parent is currently unused, remember it.
- * XXX: I know it's a layering violation, but it works
- * so well.. (if (!clk_has_active_children(pc)) )
+ * XXX: we would actually want clk_has_active_children()
+ * but this is a good-enough approximation for now.
*/
- if (pc->prepare_count == 0) {
+ if (!__clk_is_prepared(pc)) {
if (!free)
free = pc;
}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index ea8f41869e56..4e72daf12c32 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -70,9 +70,9 @@ void __init plat_mem_setup(void)
iomem_resource.end = IOMEM_RESOURCE_END;
}
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
/* This routine should be valid for all Au1x based boards */
-phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
unsigned long start = ALCHEMY_PCI_MEMWIN_START;
unsigned long end = ALCHEMY_PCI_MEMWIN_END;
@@ -83,7 +83,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
/* Check for PCI memory window */
if (phys_addr >= start && (phys_addr + size - 1) <= end)
- return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
+ return (phys_addr_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
/* default nop */
return phys_addr;
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 7e2356fd5fd6..af2441dbfc12 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -311,8 +311,7 @@ static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
&dev_addr[0], &dev_addr[1],
&dev_addr[2], &dev_addr[3],
&dev_addr[4], &dev_addr[5]) != 6) {
- pr_warning("cannot parse mac address, "
- "using random address\n");
+ pr_warn("cannot parse mac address, using random address\n");
eth_random_addr(dev_addr);
}
} else
@@ -665,7 +664,7 @@ static int __init ar7_register_devices(void)
res = platform_device_register(&physmap_flash);
if (res)
- pr_warning("unable to register physmap-flash: %d\n", res);
+ pr_warn("unable to register physmap-flash: %d\n", res);
if (ar7_is_titan())
titan_fixup_devices();
@@ -673,13 +672,13 @@ static int __init ar7_register_devices(void)
ar7_device_disable(vlynq_low_data.reset_bit);
res = platform_device_register(&vlynq_low);
if (res)
- pr_warning("unable to register vlynq-low: %d\n", res);
+ pr_warn("unable to register vlynq-low: %d\n", res);
if (ar7_has_high_vlynq()) {
ar7_device_disable(vlynq_high_data.reset_bit);
res = platform_device_register(&vlynq_high);
if (res)
- pr_warning("unable to register vlynq-high: %d\n", res);
+ pr_warn("unable to register vlynq-high: %d\n", res);
}
if (ar7_has_high_cpmac()) {
@@ -689,9 +688,10 @@ static int __init ar7_register_devices(void)
res = platform_device_register(&cpmac_high);
if (res)
- pr_warning("unable to register cpmac-high: %d\n", res);
+ pr_warn("unable to register cpmac-high: %d\n",
+ res);
} else
- pr_warning("unable to add cpmac-high phy: %d\n", res);
+ pr_warn("unable to add cpmac-high phy: %d\n", res);
} else
cpmac_low_data.phy_mask = 0xffffffff;
@@ -700,18 +700,18 @@ static int __init ar7_register_devices(void)
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
- pr_warning("unable to register cpmac-low: %d\n", res);
+ pr_warn("unable to register cpmac-low: %d\n", res);
} else
- pr_warning("unable to add cpmac-low phy: %d\n", res);
+ pr_warn("unable to add cpmac-low phy: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
if (res)
- pr_warning("unable to register leds: %d\n", res);
+ pr_warn("unable to register leds: %d\n", res);
res = platform_device_register(&ar7_udc);
if (res)
- pr_warning("unable to register usb slave: %d\n", res);
+ pr_warn("unable to register usb slave: %d\n", res);
/* Register watchdog only if enabled in hardware */
bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
@@ -726,7 +726,7 @@ static int __init ar7_register_devices(void)
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
res = platform_device_register(&ar7_wdt);
if (res)
- pr_warning("unable to register watchdog: %d\n", res);
+ pr_warn("unable to register watchdog: %d\n", res);
}
return 0;
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
new file mode 100644
index 000000000000..fc19dd57e42d
--- /dev/null
+++ b/arch/mips/ath25/Kconfig
@@ -0,0 +1,16 @@
+config SOC_AR5312
+ bool "Atheros AR5312/AR2312+ SoC support"
+ depends on ATH25
+ default y
+
+config SOC_AR2315
+ bool "Atheros AR2315+ SoC support"
+ depends on ATH25
+ default y
+
+config PCI_AR2315
+ bool "Atheros AR2315 PCI controller support"
+ depends on SOC_AR2315
+ select HW_HAS_PCI
+ select PCI
+ default y
diff --git a/arch/mips/ath25/Makefile b/arch/mips/ath25/Makefile
new file mode 100644
index 000000000000..eabad7da446a
--- /dev/null
+++ b/arch/mips/ath25/Makefile
@@ -0,0 +1,16 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_AR5312) += ar5312.o
+obj-$(CONFIG_SOC_AR2315) += ar2315.o
diff --git a/arch/mips/ath25/Platform b/arch/mips/ath25/Platform
new file mode 100644
index 000000000000..ef3f81fa080b
--- /dev/null
+++ b/arch/mips/ath25/Platform
@@ -0,0 +1,6 @@
+#
+# Atheros AR531X/AR231X WiSoC
+#
+platform-$(CONFIG_ATH25) += ath25/
+cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25
+load-$(CONFIG_ATH25) += 0xffffffff80041000
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
new file mode 100644
index 000000000000..2befa7d766a6
--- /dev/null
+++ b/arch/mips/ath25/ar2315.c
@@ -0,0 +1,364 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
+ */
+
+/*
+ * Platform devices for Atheros AR2315 SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+
+#include "devices.h"
+#include "ar2315.h"
+#include "ar2315_regs.h"
+
+static void __iomem *ar2315_rst_base;
+static struct irq_domain *ar2315_misc_irq_domain;
+
+static inline u32 ar2315_rst_reg_read(u32 reg)
+{
+ return __raw_readl(ar2315_rst_base + reg);
+}
+
+static inline void ar2315_rst_reg_write(u32 reg, u32 val)
+{
+ __raw_writel(val, ar2315_rst_base + reg);
+}
+
+static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val)
+{
+ u32 ret = ar2315_rst_reg_read(reg);
+
+ ret &= ~mask;
+ ret |= val;
+ ar2315_rst_reg_write(reg, ret);
+}
+
+static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
+{
+ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
+ ar2315_rst_reg_read(AR2315_AHB_ERR1);
+
+ pr_emerg("AHB fatal error\n");
+ machine_restart("AHB error"); /* Catastrophic failure */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ar2315_ahb_err_interrupt = {
+ .handler = ar2315_ahb_err_handler,
+ .name = "ar2315-ahb-error",
+};
+
+static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
+ ar2315_rst_reg_read(AR2315_IMR);
+ unsigned nr, misc_irq = 0;
+
+ if (pending) {
+ struct irq_domain *domain = irq_get_handler_data(irq);
+
+ nr = __ffs(pending);
+ misc_irq = irq_find_mapping(domain, nr);
+ }
+
+ if (misc_irq) {
+ if (nr == AR2315_MISC_IRQ_GPIO)
+ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO);
+ else if (nr == AR2315_MISC_IRQ_WATCHDOG)
+ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD);
+ generic_handle_irq(misc_irq);
+ } else {
+ spurious_interrupt();
+ }
+}
+
+static void ar2315_misc_irq_unmask(struct irq_data *d)
+{
+ ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq));
+}
+
+static void ar2315_misc_irq_mask(struct irq_data *d)
+{
+ ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0);
+}
+
+static struct irq_chip ar2315_misc_irq_chip = {
+ .name = "ar2315-misc",
+ .irq_unmask = ar2315_misc_irq_unmask,
+ .irq_mask = ar2315_misc_irq_mask,
+};
+
+static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq);
+ return 0;
+}
+
+static struct irq_domain_ops ar2315_misc_irq_domain_ops = {
+ .map = ar2315_misc_irq_map,
+};
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+static void ar2315_irq_dispatch(void)
+{
+ u32 pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR2315_IRQ_WLAN0);
+#ifdef CONFIG_PCI_AR2315
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR2315_IRQ_LCBUS_PCI);
+#endif
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(AR2315_IRQ_MISC);
+ else if (pending & CAUSEF_IP7)
+ do_IRQ(ATH25_IRQ_CPU_CLOCK);
+ else
+ spurious_interrupt();
+}
+
+void __init ar2315_arch_init_irq(void)
+{
+ struct irq_domain *domain;
+ unsigned irq;
+
+ ath25_irq_dispatch = ar2315_irq_dispatch;
+
+ domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
+ &ar2315_misc_irq_domain_ops, NULL);
+ if (!domain)
+ panic("Failed to add IRQ domain");
+
+ irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
+ setup_irq(irq, &ar2315_ahb_err_interrupt);
+
+ irq_set_chained_handler(AR2315_IRQ_MISC, ar2315_misc_irq_handler);
+ irq_set_handler_data(AR2315_IRQ_MISC, domain);
+
+ ar2315_misc_irq_domain = domain;
+}
+
+void __init ar2315_init_devices(void)
+{
+ /* Find board configuration */
+ ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
+
+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+}
+
+static void ar2315_restart(char *command)
+{
+ void (*mips_reset_vec)(void) = (void *)0xbfc00000;
+
+ local_irq_disable();
+
+ /* try reset the system via reset control */
+ ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);
+
+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits
+ * a workaround. Give it some time to attempt a gpio based hardware
+ * reset (atheros reference design workaround) */
+
+ /* TODO: implement the GPIO reset workaround */
+
+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+ * workaround. Attempt to jump to the mips reset location -
+ * the boot loader itself might be able to recover the system */
+ mips_reset_vec();
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
+static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };
+
+static unsigned __init ar2315_sys_clk(u32 clock_ctl)
+{
+ unsigned int pllc_ctrl, cpu_div;
+ unsigned int pllc_out, refdiv, fdiv, divby2;
+ unsigned int clk_div;
+
+ pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL);
+ refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV);
+ refdiv = clockctl1_predivide_table[refdiv];
+ fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
+ divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
+ pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;
+
+ /* clkm input selected */
+ switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
+ case 0:
+ case 1:
+ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV);
+ clk_div = pllc_divide_table[clk_div];
+ break;
+ case 2:
+ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV);
+ clk_div = pllc_divide_table[clk_div];
+ break;
+ default:
+ pllc_out = 40000000;
+ clk_div = 1;
+ break;
+ }
+
+ cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV);
+ cpu_div = cpu_div * 2 ?: 1;
+
+ return pllc_out / (clk_div * cpu_div);
+}
+
+static inline unsigned ar2315_cpu_frequency(void)
+{
+ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK));
+}
+
+static inline unsigned ar2315_apb_frequency(void)
+{
+ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK));
+}
+
+void __init ar2315_plat_time_init(void)
+{
+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
+}
+
+void __init ar2315_plat_mem_setup(void)
+{
+ void __iomem *sdram_base;
+ u32 memsize, memcfg;
+ u32 devid;
+ u32 config;
+
+ /* Detect memory size */
+ sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE,
+ AR2315_SDRAMCTL_SIZE);
+ memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
+ memsize = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH);
+ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
+ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
+ memsize <<= 3;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ iounmap(sdram_base);
+
+ ar2315_rst_base = ioremap_nocache(AR2315_RST_BASE, AR2315_RST_SIZE);
+
+ /* Detect the hardware based on the device ID */
+ devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP;
+ switch (devid) {
+ case 0x91: /* Need to check */
+ ath25_soc = ATH25_SOC_AR2318;
+ break;
+ case 0x90:
+ ath25_soc = ATH25_SOC_AR2317;
+ break;
+ case 0x87:
+ ath25_soc = ATH25_SOC_AR2316;
+ break;
+ case 0x86:
+ default:
+ ath25_soc = ATH25_SOC_AR2315;
+ break;
+ }
+ ath25_board.devid = devid;
+
+ /* Clear any lingering AHB errors */
+ config = read_c0_config();
+ write_c0_config(config & ~0x3);
+ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
+ ar2315_rst_reg_read(AR2315_AHB_ERR1);
+ ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE);
+
+ _machine_restart = ar2315_restart;
+}
+
+#ifdef CONFIG_PCI_AR2315
+static struct resource ar2315_pci_res[] = {
+ {
+ .name = "ar2315-pci-ctrl",
+ .flags = IORESOURCE_MEM,
+ .start = AR2315_PCI_BASE,
+ .end = AR2315_PCI_BASE + AR2315_PCI_SIZE - 1,
+ },
+ {
+ .name = "ar2315-pci-ext",
+ .flags = IORESOURCE_MEM,
+ .start = AR2315_PCI_EXT_BASE,
+ .end = AR2315_PCI_EXT_BASE + AR2315_PCI_EXT_SIZE - 1,
+ },
+ {
+ .name = "ar2315-pci",
+ .flags = IORESOURCE_IRQ,
+ .start = AR2315_IRQ_LCBUS_PCI,
+ .end = AR2315_IRQ_LCBUS_PCI,
+ },
+};
+#endif
+
+void __init ar2315_arch_init(void)
+{
+ unsigned irq = irq_create_mapping(ar2315_misc_irq_domain,
+ AR2315_MISC_IRQ_UART0);
+
+ ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency());
+
+#ifdef CONFIG_PCI_AR2315
+ if (ath25_soc == ATH25_SOC_AR2315) {
+ /* Reset PCI DMA logic */
+ ar2315_rst_reg_mask(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
+ msleep(20);
+ ar2315_rst_reg_mask(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
+ msleep(20);
+
+ /* Configure endians */
+ ar2315_rst_reg_mask(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB |
+ AR2315_CONFIG_PCIAHB_BRIDGE);
+
+ /* Configure as PCI host with DMA */
+ ar2315_rst_reg_write(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
+ (AR2315_PCICLK_IN_FREQ_DIV_6 <<
+ AR2315_PCICLK_DIV_S));
+ ar2315_rst_reg_mask(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
+ ar2315_rst_reg_mask(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK |
+ AR2315_IF_MASK, AR2315_IF_PCI |
+ AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
+ (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
+ AR2315_IF_PCI_CLK_SHIFT));
+
+ platform_device_register_simple("ar2315-pci", -1,
+ ar2315_pci_res,
+ ARRAY_SIZE(ar2315_pci_res));
+ }
+#endif
+}
diff --git a/arch/mips/ath25/ar2315.h b/arch/mips/ath25/ar2315.h
new file mode 100644
index 000000000000..877afe63eed5
--- /dev/null
+++ b/arch/mips/ath25/ar2315.h
@@ -0,0 +1,22 @@
+#ifndef __AR2315_H
+#define __AR2315_H
+
+#ifdef CONFIG_SOC_AR2315
+
+void ar2315_arch_init_irq(void);
+void ar2315_init_devices(void);
+void ar2315_plat_time_init(void);
+void ar2315_plat_mem_setup(void);
+void ar2315_arch_init(void);
+
+#else
+
+static inline void ar2315_arch_init_irq(void) {}
+static inline void ar2315_init_devices(void) {}
+static inline void ar2315_plat_time_init(void) {}
+static inline void ar2315_plat_mem_setup(void) {}
+static inline void ar2315_arch_init(void) {}
+
+#endif
+
+#endif /* __AR2315_H */
diff --git a/arch/mips/ath25/ar2315_regs.h b/arch/mips/ath25/ar2315_regs.h
new file mode 100644
index 000000000000..16e86149cb74
--- /dev/null
+++ b/arch/mips/ath25/ar2315_regs.h
@@ -0,0 +1,410 @@
+/*
+ * Register definitions for AR2315+
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __ASM_MACH_ATH25_AR2315_REGS_H
+#define __ASM_MACH_ATH25_AR2315_REGS_H
+
+/*
+ * IRQs
+ */
+#define AR2315_IRQ_MISC (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */
+#define AR2315_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */
+#define AR2315_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */
+#define AR2315_IRQ_LCBUS_PCI (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */
+#define AR2315_IRQ_WLAN0_POLL (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */
+
+/*
+ * Miscellaneous interrupts, which share IP2.
+ */
+#define AR2315_MISC_IRQ_UART0 0
+#define AR2315_MISC_IRQ_I2C_RSVD 1
+#define AR2315_MISC_IRQ_SPI 2
+#define AR2315_MISC_IRQ_AHB 3
+#define AR2315_MISC_IRQ_APB 4
+#define AR2315_MISC_IRQ_TIMER 5
+#define AR2315_MISC_IRQ_GPIO 6
+#define AR2315_MISC_IRQ_WATCHDOG 7
+#define AR2315_MISC_IRQ_IR_RSVD 8
+#define AR2315_MISC_IRQ_COUNT 9
+
+/*
+ * Address map
+ */
+#define AR2315_SPI_READ_BASE 0x08000000 /* SPI flash */
+#define AR2315_SPI_READ_SIZE 0x01000000
+#define AR2315_WLAN0_BASE 0x10000000 /* Wireless MMR */
+#define AR2315_PCI_BASE 0x10100000 /* PCI MMR */
+#define AR2315_PCI_SIZE 0x00001000
+#define AR2315_SDRAMCTL_BASE 0x10300000 /* SDRAM MMR */
+#define AR2315_SDRAMCTL_SIZE 0x00000020
+#define AR2315_LOCAL_BASE 0x10400000 /* Local bus MMR */
+#define AR2315_ENET0_BASE 0x10500000 /* Ethernet MMR */
+#define AR2315_RST_BASE 0x11000000 /* Reset control MMR */
+#define AR2315_RST_SIZE 0x00000100
+#define AR2315_UART0_BASE 0x11100000 /* UART MMR */
+#define AR2315_SPI_MMR_BASE 0x11300000 /* SPI flash MMR */
+#define AR2315_SPI_MMR_SIZE 0x00000010
+#define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */
+#define AR2315_PCI_EXT_SIZE 0x40000000
+
+/*
+ * Configuration registers
+ */
+
+/* Cold reset register */
+#define AR2315_COLD_RESET 0x0000
+
+#define AR2315_RESET_COLD_AHB 0x00000001
+#define AR2315_RESET_COLD_APB 0x00000002
+#define AR2315_RESET_COLD_CPU 0x00000004
+#define AR2315_RESET_COLD_CPUWARM 0x00000008
+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU |\
+ RESET_COLD_APB |\
+ RESET_COLD_AHB) /* full system */
+#define AR2317_RESET_SYSTEM 0x00000010
+
+/* Reset register */
+#define AR2315_RESET 0x0004
+
+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BB */
+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset mem control */
+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI iface */
+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR iface */
+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 MAC */
+
+/* AHB master arbitration control */
+#define AR2315_AHB_ARB_CTL 0x0008
+
+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
+#define AR2315_ARB_LOCAL 0x00000008 /* Local bus */
+#define AR2315_ARB_PCI 0x00000010 /* PCI bus */
+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
+#define AR2315_ARB_RETRY 0x00000100 /* Retry policy (debug) */
+
+/* Config Register */
+#define AR2315_ENDIAN_CTL 0x000c
+
+#define AR2315_CONFIG_AHB 0x00000001 /* EC-AHB bridge endian */
+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Mem controller endian */
+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
+#define AR2315_CONFIG_BIG 0x00000400
+#define AR2315_CONFIG_PCIAHB 0x00000800
+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
+#define AR2315_CONFIG_CPU_DRAM 0x00010000
+#define AR2315_CONFIG_CPU_PCI 0x00020000
+#define AR2315_CONFIG_CPU_MMR 0x00040000
+
+/* NMI control */
+#define AR2315_NMI_CTL 0x0010
+
+#define AR2315_NMI_EN 1
+
+/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */
+#define AR2315_SREV 0x0014
+
+#define AR2315_REV_MAJ 0x000000f0
+#define AR2315_REV_MAJ_S 4
+#define AR2315_REV_MIN 0x0000000f
+#define AR2315_REV_MIN_S 0
+#define AR2315_REV_CHIP (AR2315_REV_MAJ | AR2315_REV_MIN)
+
+/* Interface Enable */
+#define AR2315_IF_CTL 0x0018
+
+#define AR2315_IF_MASK 0x00000007
+#define AR2315_IF_DISABLED 0 /* Disable all */
+#define AR2315_IF_PCI 1 /* PCI */
+#define AR2315_IF_TS_LOCAL 2 /* Local bus */
+#define AR2315_IF_ALL 3 /* Emulation only */
+#define AR2315_IF_LOCAL_HOST 0x00000008
+#define AR2315_IF_PCI_HOST 0x00000010
+#define AR2315_IF_PCI_INTR 0x00000020
+#define AR2315_IF_PCI_CLK_MASK 0x00030000
+#define AR2315_IF_PCI_CLK_INPUT 0
+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
+#define AR2315_IF_PCI_CLK_SHIFT 16
+
+/* APB Interrupt control */
+#define AR2315_ISR 0x0020
+#define AR2315_IMR 0x0024
+#define AR2315_GISR 0x0028
+
+#define AR2315_ISR_UART0 0x00000001 /* high speed UART */
+#define AR2315_ISR_I2C_RSVD 0x00000002 /* I2C bus */
+#define AR2315_ISR_SPI 0x00000004 /* SPI bus */
+#define AR2315_ISR_AHB 0x00000008 /* AHB error */
+#define AR2315_ISR_APB 0x00000010 /* APB error */
+#define AR2315_ISR_TIMER 0x00000020 /* Timer */
+#define AR2315_ISR_GPIO 0x00000040 /* GPIO */
+#define AR2315_ISR_WD 0x00000080 /* Watchdog */
+#define AR2315_ISR_IR_RSVD 0x00000100 /* IR */
+
+#define AR2315_GISR_MISC 0x00000001 /* Misc */
+#define AR2315_GISR_WLAN0 0x00000002 /* WLAN0 */
+#define AR2315_GISR_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
+#define AR2315_GISR_LOCALPCI 0x00000008 /* Local/PCI bus */
+#define AR2315_GISR_WMACPOLL 0x00000010
+#define AR2315_GISR_TIMER 0x00000020
+#define AR2315_GISR_ETHERNET 0x00000040 /* Ethernet */
+
+/* Generic timer */
+#define AR2315_TIMER 0x0030
+#define AR2315_RELOAD 0x0034
+
+/* Watchdog timer */
+#define AR2315_WDT_TIMER 0x0038
+#define AR2315_WDT_CTRL 0x003c
+
+#define AR2315_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */
+#define AR2315_WDT_CTRL_NMI 0x00000001 /* NMI on watchdog */
+#define AR2315_WDT_CTRL_RESET 0x00000002 /* reset on watchdog */
+
+/* CPU Performance Counters */
+#define AR2315_PERFCNT0 0x0048
+#define AR2315_PERFCNT1 0x004c
+
+#define AR2315_PERF0_DATAHIT 0x00000001 /* Count Data Cache Hits */
+#define AR2315_PERF0_DATAMISS 0x00000002 /* Count Data Cache Misses */
+#define AR2315_PERF0_INSTHIT 0x00000004 /* Count Instruction Cache Hits */
+#define AR2315_PERF0_INSTMISS 0x00000008 /* Count Instruction Cache Misses */
+#define AR2315_PERF0_ACTIVE 0x00000010 /* Count Active Processor Cycles */
+#define AR2315_PERF0_WBHIT 0x00000020 /* Count CPU Write Buffer Hits */
+#define AR2315_PERF0_WBMISS 0x00000040 /* Count CPU Write Buffer Misses */
+
+#define AR2315_PERF1_EB_ARDY 0x00000001 /* Count EB_ARdy signal */
+#define AR2315_PERF1_EB_AVALID 0x00000002 /* Count EB_AValid signal */
+#define AR2315_PERF1_EB_WDRDY 0x00000004 /* Count EB_WDRdy signal */
+#define AR2315_PERF1_EB_RDVAL 0x00000008 /* Count EB_RdVal signal */
+#define AR2315_PERF1_VRADDR 0x00000010 /* Count valid read address cycles*/
+#define AR2315_PERF1_VWADDR 0x00000020 /* Count valid write address cycl.*/
+#define AR2315_PERF1_VWDATA 0x00000040 /* Count valid write data cycles */
+
+/* AHB Error Reporting */
+#define AR2315_AHB_ERR0 0x0050 /* error */
+#define AR2315_AHB_ERR1 0x0054 /* haddr */
+#define AR2315_AHB_ERR2 0x0058 /* hwdata */
+#define AR2315_AHB_ERR3 0x005c /* hrdata */
+#define AR2315_AHB_ERR4 0x0060 /* status */
+
+#define AR2315_AHB_ERROR_DET 1 /* AHB Error has been detected, */
+ /* write 1 to clear all bits in ERR0 */
+#define AR2315_AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
+#define AR2315_AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
+
+#define AR2315_PROCERR_HMAST 0x0000000f
+#define AR2315_PROCERR_HMAST_DFLT 0
+#define AR2315_PROCERR_HMAST_WMAC 1
+#define AR2315_PROCERR_HMAST_ENET 2
+#define AR2315_PROCERR_HMAST_PCIENDPT 3
+#define AR2315_PROCERR_HMAST_LOCAL 4
+#define AR2315_PROCERR_HMAST_CPU 5
+#define AR2315_PROCERR_HMAST_PCITGT 6
+#define AR2315_PROCERR_HMAST_S 0
+#define AR2315_PROCERR_HWRITE 0x00000010
+#define AR2315_PROCERR_HSIZE 0x00000060
+#define AR2315_PROCERR_HSIZE_S 5
+#define AR2315_PROCERR_HTRANS 0x00000180
+#define AR2315_PROCERR_HTRANS_S 7
+#define AR2315_PROCERR_HBURST 0x00000e00
+#define AR2315_PROCERR_HBURST_S 9
+
+/* Clock Control */
+#define AR2315_PLLC_CTL 0x0064
+#define AR2315_PLLV_CTL 0x0068
+#define AR2315_CPUCLK 0x006c
+#define AR2315_AMBACLK 0x0070
+#define AR2315_SYNCCLK 0x0074
+#define AR2315_DSL_SLEEP_CTL 0x0080
+#define AR2315_DSL_SLEEP_DUR 0x0084
+
+/* PLLc Control fields */
+#define AR2315_PLLC_REF_DIV_M 0x00000003
+#define AR2315_PLLC_REF_DIV_S 0
+#define AR2315_PLLC_FDBACK_DIV_M 0x0000007c
+#define AR2315_PLLC_FDBACK_DIV_S 2
+#define AR2315_PLLC_ADD_FDBACK_DIV_M 0x00000080
+#define AR2315_PLLC_ADD_FDBACK_DIV_S 7
+#define AR2315_PLLC_CLKC_DIV_M 0x0001c000
+#define AR2315_PLLC_CLKC_DIV_S 14
+#define AR2315_PLLC_CLKM_DIV_M 0x00700000
+#define AR2315_PLLC_CLKM_DIV_S 20
+
+/* CPU CLK Control fields */
+#define AR2315_CPUCLK_CLK_SEL_M 0x00000003
+#define AR2315_CPUCLK_CLK_SEL_S 0
+#define AR2315_CPUCLK_CLK_DIV_M 0x0000000c
+#define AR2315_CPUCLK_CLK_DIV_S 2
+
+/* AMBA CLK Control fields */
+#define AR2315_AMBACLK_CLK_SEL_M 0x00000003
+#define AR2315_AMBACLK_CLK_SEL_S 0
+#define AR2315_AMBACLK_CLK_DIV_M 0x0000000c
+#define AR2315_AMBACLK_CLK_DIV_S 2
+
+/* PCI Clock Control */
+#define AR2315_PCICLK 0x00a4
+
+#define AR2315_PCICLK_INPUT_M 0x00000003
+#define AR2315_PCICLK_INPUT_S 0
+#define AR2315_PCICLK_PLLC_CLKM 0
+#define AR2315_PCICLK_PLLC_CLKM1 1
+#define AR2315_PCICLK_PLLC_CLKC 2
+#define AR2315_PCICLK_REF_CLK 3
+#define AR2315_PCICLK_DIV_M 0x0000000c
+#define AR2315_PCICLK_DIV_S 2
+#define AR2315_PCICLK_IN_FREQ 0
+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
+
+/* Observation Control Register */
+#define AR2315_OCR 0x00b0
+
+#define AR2315_OCR_GPIO0_IRIN 0x00000040
+#define AR2315_OCR_GPIO1_IROUT 0x00000080
+#define AR2315_OCR_GPIO3_RXCLR 0x00000200
+
+/* General Clock Control */
+#define AR2315_MISCCLK 0x00b4
+
+#define AR2315_MISCCLK_PLLBYPASS_EN 0x00000001
+#define AR2315_MISCCLK_PROCREFCLK 0x00000002
+
+/*
+ * SDRAM Controller
+ * - No read or write buffers are included.
+ */
+#define AR2315_MEM_CFG 0x0000
+#define AR2315_MEM_CTRL 0x000c
+#define AR2315_MEM_REF 0x0010
+
+#define AR2315_MEM_CFG_DATA_WIDTH_M 0x00006000
+#define AR2315_MEM_CFG_DATA_WIDTH_S 13
+#define AR2315_MEM_CFG_COL_WIDTH_M 0x00001e00
+#define AR2315_MEM_CFG_COL_WIDTH_S 9
+#define AR2315_MEM_CFG_ROW_WIDTH_M 0x000001e0
+#define AR2315_MEM_CFG_ROW_WIDTH_S 5
+#define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018
+#define AR2315_MEM_CFG_BANKADDR_BITS_S 3
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR2315_LB_CONFIG 0x0000
+
+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
+#define AR2315_LBCONF_INT_CTR3 0x000c0000 /* GND drive, Vdd drive */
+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
+
+#define AR2315_LB_CLKSEL 0x0004
+
+#define AR2315_LBCLK_EXT 0x00000001 /* use external clk for lb */
+
+#define AR2315_LB_1MS 0x0008
+
+#define AR2315_LB1MS_MASK 0x0003ffff /* # of AHB clk cycles in 1ms */
+
+#define AR2315_LB_MISCCFG 0x000c
+
+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
+#define AR2315_LBM_TIMEOUT_M 0x00ffff80
+#define AR2315_LBM_TIMEOUT_S 7
+#define AR2315_LBM_PORTMUX 0x07000000
+
+#define AR2315_LB_RXTSOFF 0x0010
+
+#define AR2315_LB_TX_CHAIN_EN 0x0100
+
+#define AR2315_LB_TXEN_0 0x00000001
+#define AR2315_LB_TXEN_1 0x00000002
+#define AR2315_LB_TXEN_2 0x00000004
+#define AR2315_LB_TXEN_3 0x00000008
+
+#define AR2315_LB_TX_CHAIN_DIS 0x0104
+#define AR2315_LB_TX_DESC_PTR 0x0200
+
+#define AR2315_LB_RX_CHAIN_EN 0x0400
+
+#define AR2315_LB_RXEN 0x00000001
+
+#define AR2315_LB_RX_CHAIN_DIS 0x0404
+#define AR2315_LB_RX_DESC_PTR 0x0408
+
+#define AR2315_LB_INT_STATUS 0x0500
+
+#define AR2315_LB_INT_TX_DESC 0x00000001
+#define AR2315_LB_INT_TX_OK 0x00000002
+#define AR2315_LB_INT_TX_ERR 0x00000004
+#define AR2315_LB_INT_TX_EOF 0x00000008
+#define AR2315_LB_INT_RX_DESC 0x00000010
+#define AR2315_LB_INT_RX_OK 0x00000020
+#define AR2315_LB_INT_RX_ERR 0x00000040
+#define AR2315_LB_INT_RX_EOF 0x00000080
+#define AR2315_LB_INT_TX_TRUNC 0x00000100
+#define AR2315_LB_INT_TX_STARVE 0x00000200
+#define AR2315_LB_INT_LB_TIMEOUT 0x00000400
+#define AR2315_LB_INT_LB_ERR 0x00000800
+#define AR2315_LB_INT_MBOX_WR 0x00001000
+#define AR2315_LB_INT_MBOX_RD 0x00002000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR2315_LB_INT_MASK 0x0504
+
+#define AR2315_LB_INT_EN 0x0508
+#define AR2315_LB_MBOX 0x0600
+
+#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
new file mode 100644
index 000000000000..b6887f75144c
--- /dev/null
+++ b/arch/mips/ath25/ar5312.c
@@ -0,0 +1,393 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
+ */
+
+/*
+ * Platform devices for Atheros AR5312 SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+
+#include "devices.h"
+#include "ar5312.h"
+#include "ar5312_regs.h"
+
+static void __iomem *ar5312_rst_base;
+static struct irq_domain *ar5312_misc_irq_domain;
+
+static inline u32 ar5312_rst_reg_read(u32 reg)
+{
+ return __raw_readl(ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_write(u32 reg, u32 val)
+{
+ __raw_writel(val, ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val)
+{
+ u32 ret = ar5312_rst_reg_read(reg);
+
+ ret &= ~mask;
+ ret |= val;
+ ar5312_rst_reg_write(reg, ret);
+}
+
+static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
+{
+ u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1);
+ u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */
+ u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1);
+ u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */
+
+ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+ proc_addr, proc1, dma_addr, dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ar5312_ahb_err_interrupt = {
+ .handler = ar5312_ahb_err_handler,
+ .name = "ar5312-ahb-error",
+};
+
+static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
+ ar5312_rst_reg_read(AR5312_IMR);
+ unsigned nr, misc_irq = 0;
+
+ if (pending) {
+ struct irq_domain *domain = irq_get_handler_data(irq);
+
+ nr = __ffs(pending);
+ misc_irq = irq_find_mapping(domain, nr);
+ }
+
+ if (misc_irq) {
+ generic_handle_irq(misc_irq);
+ if (nr == AR5312_MISC_IRQ_TIMER)
+ ar5312_rst_reg_read(AR5312_TIMER);
+ } else {
+ spurious_interrupt();
+ }
+}
+
+/* Enable the specified AR5312_MISC_IRQ interrupt */
+static void ar5312_misc_irq_unmask(struct irq_data *d)
+{
+ ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq));
+}
+
+/* Disable the specified AR5312_MISC_IRQ interrupt */
+static void ar5312_misc_irq_mask(struct irq_data *d)
+{
+ ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0);
+ ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */
+}
+
+static struct irq_chip ar5312_misc_irq_chip = {
+ .name = "ar5312-misc",
+ .irq_unmask = ar5312_misc_irq_unmask,
+ .irq_mask = ar5312_misc_irq_mask,
+};
+
+static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq);
+ return 0;
+}
+
+static struct irq_domain_ops ar5312_misc_irq_domain_ops = {
+ .map = ar5312_misc_irq_map,
+};
+
+static void ar5312_irq_dispatch(void)
+{
+ u32 pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR5312_IRQ_WLAN0);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR5312_IRQ_WLAN1);
+ else if (pending & CAUSEF_IP6)
+ do_IRQ(AR5312_IRQ_MISC);
+ else if (pending & CAUSEF_IP7)
+ do_IRQ(ATH25_IRQ_CPU_CLOCK);
+ else
+ spurious_interrupt();
+}
+
+void __init ar5312_arch_init_irq(void)
+{
+ struct irq_domain *domain;
+ unsigned irq;
+
+ ath25_irq_dispatch = ar5312_irq_dispatch;
+
+ domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT,
+ &ar5312_misc_irq_domain_ops, NULL);
+ if (!domain)
+ panic("Failed to add IRQ domain");
+
+ irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
+ setup_irq(irq, &ar5312_ahb_err_interrupt);
+
+ irq_set_chained_handler(AR5312_IRQ_MISC, ar5312_misc_irq_handler);
+ irq_set_handler_data(AR5312_IRQ_MISC, domain);
+
+ ar5312_misc_irq_domain = domain;
+}
+
+static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+ .start = AR5312_FLASH_BASE,
+ .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &ar5312_flash_data,
+ .resource = &ar5312_flash_resource,
+ .num_resources = 1,
+};
+
+static void __init ar5312_flash_init(void)
+{
+ void __iomem *flashctl_base;
+ u32 ctl;
+
+ flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE,
+ AR5312_FLASHCTL_SIZE);
+
+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
+ ctl &= AR5312_FLASHCTL_MW;
+
+ /* fixup flash width */
+ switch (ctl) {
+ case AR5312_FLASHCTL_MW16:
+ ar5312_flash_data.width = 2;
+ break;
+ case AR5312_FLASHCTL_MW8:
+ default:
+ ar5312_flash_data.width = 1;
+ break;
+ }
+
+ /*
+ * Configure flash bank 0.
+ * Assume 8M window size. Flash will be aliased if it's smaller
+ */
+ ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE;
+ ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S;
+ ctl |= 0x07 << AR5312_FLASHCTL_WST1_S;
+ ctl |= 0x07 << AR5312_FLASHCTL_WST2_S;
+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0);
+
+ /* Disable other flash banks */
+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1);
+ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1);
+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2);
+ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2);
+
+ iounmap(flashctl_base);
+}
+
+void __init ar5312_init_devices(void)
+{
+ struct ath25_boarddata *config;
+
+ ar5312_flash_init();
+
+ /* Locate board/radio config data */
+ ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE);
+ config = ath25_board.config;
+
+ /* AR2313 has CPU minor rev. 10 */
+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+ ath25_soc = ATH25_SOC_AR2313;
+
+ /* AR2312 shares the same Silicon ID as AR5312 */
+ else if (config->flags & BD_ISCASPER)
+ ath25_soc = ATH25_SOC_AR2312;
+
+ /* Everything else is probably AR5312 or compatible */
+ else
+ ath25_soc = ATH25_SOC_AR5312;
+
+ platform_device_register(&ar5312_physmap_flash);
+
+ switch (ath25_soc) {
+ case ATH25_SOC_AR5312:
+ if (!ath25_board.radio)
+ return;
+
+ if (!(config->flags & BD_WLAN0))
+ break;
+
+ ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
+ break;
+ case ATH25_SOC_AR2312:
+ case ATH25_SOC_AR2313:
+ if (!ath25_board.radio)
+ return;
+ break;
+ default:
+ break;
+ }
+
+ if (config->flags & BD_WLAN1)
+ ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1);
+}
+
+static void ar5312_restart(char *command)
+{
+ /* reset the system */
+ local_irq_disable();
+ while (1)
+ ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM);
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
+
+static unsigned __init ar5312_cpu_frequency(void)
+{
+ u32 scratch, devid, clock_ctl1;
+ u32 predivide_mask, multiplier_mask, doubler_mask;
+ unsigned predivide_shift, multiplier_shift;
+ unsigned predivide_select, predivisor, multiplier;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ scratch = ar5312_rst_reg_read(AR5312_SCRATCH);
+ if (scratch)
+ return scratch;
+
+ devid = ar5312_rst_reg_read(AR5312_REV);
+ devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S;
+ if (devid == AR5312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier)
+ * sys_freq = cpu_freq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpu_freq = 200MHz
+ * sys_freq = 50MHz
+ * cnt_freq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1);
+ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
+ predivisor = clockctl1_predivide_table[predivide_select];
+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clock_ctl1 & doubler_mask)
+ multiplier <<= 1;
+
+ return (40000000 / predivisor) * multiplier;
+}
+
+static inline unsigned ar5312_sys_frequency(void)
+{
+ return ar5312_cpu_frequency() / 4;
+}
+
+void __init ar5312_plat_time_init(void)
+{
+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+void __init ar5312_plat_mem_setup(void)
+{
+ void __iomem *sdram_base;
+ u32 memsize, memcfg, bank0_ac, bank1_ac;
+ u32 devid;
+
+ /* Detect memory size */
+ sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE,
+ AR5312_SDRAMCTL_SIZE);
+ memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1);
+ bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0);
+ bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1);
+ memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) +
+ (bank1_ac ? (1 << (bank1_ac + 1)) : 0);
+ memsize <<= 20;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ iounmap(sdram_base);
+
+ ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE);
+
+ devid = ar5312_rst_reg_read(AR5312_REV);
+ devid >>= AR5312_REV_WMAC_MIN_S;
+ devid &= AR5312_REV_CHIP;
+ ath25_board.devid = (u16)devid;
+
+ /* Clear any lingering AHB errors */
+ ar5312_rst_reg_read(AR5312_PROCADDR);
+ ar5312_rst_reg_read(AR5312_DMAADDR);
+ ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE);
+
+ _machine_restart = ar5312_restart;
+}
+
+void __init ar5312_arch_init(void)
+{
+ unsigned irq = irq_create_mapping(ar5312_misc_irq_domain,
+ AR5312_MISC_IRQ_UART0);
+
+ ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency());
+}
diff --git a/arch/mips/ath25/ar5312.h b/arch/mips/ath25/ar5312.h
new file mode 100644
index 000000000000..470abb0052bd
--- /dev/null
+++ b/arch/mips/ath25/ar5312.h
@@ -0,0 +1,22 @@
+#ifndef __AR5312_H
+#define __AR5312_H
+
+#ifdef CONFIG_SOC_AR5312
+
+void ar5312_arch_init_irq(void);
+void ar5312_init_devices(void);
+void ar5312_plat_time_init(void);
+void ar5312_plat_mem_setup(void);
+void ar5312_arch_init(void);
+
+#else
+
+static inline void ar5312_arch_init_irq(void) {}
+static inline void ar5312_init_devices(void) {}
+static inline void ar5312_plat_time_init(void) {}
+static inline void ar5312_plat_mem_setup(void) {}
+static inline void ar5312_arch_init(void) {}
+
+#endif
+
+#endif /* __AR5312_H */
diff --git a/arch/mips/ath25/ar5312_regs.h b/arch/mips/ath25/ar5312_regs.h
new file mode 100644
index 000000000000..4b947f967439
--- /dev/null
+++ b/arch/mips/ath25/ar5312_regs.h
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __ASM_MACH_ATH25_AR5312_REGS_H
+#define __ASM_MACH_ATH25_AR5312_REGS_H
+
+/*
+ * IRQs
+ */
+#define AR5312_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1 (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */
+
+/*
+ * Miscellaneous interrupts, which share IP6.
+ */
+#define AR5312_MISC_IRQ_TIMER 0
+#define AR5312_MISC_IRQ_AHB_PROC 1
+#define AR5312_MISC_IRQ_AHB_DMA 2
+#define AR5312_MISC_IRQ_GPIO 3
+#define AR5312_MISC_IRQ_UART0 4
+#define AR5312_MISC_IRQ_UART0_DMA 5
+#define AR5312_MISC_IRQ_WATCHDOG 6
+#define AR5312_MISC_IRQ_LOCAL 7
+#define AR5312_MISC_IRQ_SPI 8
+#define AR5312_MISC_IRQ_COUNT 9
+
+/*
+ * Address Map
+ *
+ * The AR5312 supports 2 enet MACS, even though many reference boards only
+ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
+ * PHY or PHY switch. The AR2312 supports 1 enet MAC.
+ */
+#define AR5312_WLAN0_BASE 0x18000000
+#define AR5312_ENET0_BASE 0x18100000
+#define AR5312_ENET1_BASE 0x18200000
+#define AR5312_SDRAMCTL_BASE 0x18300000
+#define AR5312_SDRAMCTL_SIZE 0x00000010
+#define AR5312_FLASHCTL_BASE 0x18400000
+#define AR5312_FLASHCTL_SIZE 0x00000010
+#define AR5312_WLAN1_BASE 0x18500000
+#define AR5312_UART0_BASE 0x1c000000 /* UART MMR */
+#define AR5312_GPIO_BASE 0x1c002000
+#define AR5312_GPIO_SIZE 0x00000010
+#define AR5312_RST_BASE 0x1c003000
+#define AR5312_RST_SIZE 0x00000100
+#define AR5312_FLASH_BASE 0x1e000000
+#define AR5312_FLASH_SIZE 0x00800000
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR5312_TIMER 0x0000 /* countdown timer */
+#define AR5312_RELOAD 0x0004 /* timer reload value */
+#define AR5312_WDT_CTRL 0x0008 /* watchdog cntrl */
+#define AR5312_WDT_TIMER 0x000c /* watchdog timer */
+#define AR5312_ISR 0x0010 /* Intr Status Reg */
+#define AR5312_IMR 0x0014 /* Intr Mask Reg */
+#define AR5312_RESET 0x0020
+#define AR5312_CLOCKCTL1 0x0064
+#define AR5312_SCRATCH 0x006c
+#define AR5312_PROCADDR 0x0070
+#define AR5312_PROC1 0x0074
+#define AR5312_DMAADDR 0x0078
+#define AR5312_DMA1 0x007c
+#define AR5312_ENABLE 0x0080 /* interface enb */
+#define AR5312_REV 0x0090 /* revision */
+
+/* AR5312_WDT_CTRL register bit field definitions */
+#define AR5312_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */
+#define AR5312_WDT_CTRL_NMI 0x00000001
+#define AR5312_WDT_CTRL_RESET 0x00000002
+
+/* AR5312_ISR register bit field definitions */
+#define AR5312_ISR_TIMER 0x00000001
+#define AR5312_ISR_AHBPROC 0x00000002
+#define AR5312_ISR_AHBDMA 0x00000004
+#define AR5312_ISR_GPIO 0x00000008
+#define AR5312_ISR_UART0 0x00000010
+#define AR5312_ISR_UART0DMA 0x00000020
+#define AR5312_ISR_WD 0x00000040
+#define AR5312_ISR_LOCAL 0x00000080
+
+/* AR5312_RESET register bit field definitions */
+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */
+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */
+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */
+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */
+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */
+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */
+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */
+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */
+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */
+
+#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\
+ AR5312_RESET_WARM_WLAN0_MAC |\
+ AR5312_RESET_WARM_WLAN0_BB)
+
+#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\
+ AR5312_RESET_WARM_WLAN1_MAC |\
+ AR5312_RESET_WARM_WLAN1_BB)
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+/* AR5312_ENABLE register bit field definitions */
+#define AR5312_ENABLE_WLAN0 0x00000001
+#define AR5312_ENABLE_ENET0 0x00000002
+#define AR5312_ENABLE_ENET1 0x00000004
+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */
+#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */
+#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
+ AR5312_ENABLE_WLAN1_DMA)
+
+/* AR5312_REV register bit field definitions */
+#define AR5312_REV_WMAC_MAJ 0x0000f000
+#define AR5312_REV_WMAC_MAJ_S 12
+#define AR5312_REV_WMAC_MIN 0x00000f00
+#define AR5312_REV_WMAC_MIN_S 8
+#define AR5312_REV_MAJ 0x000000f0
+#define AR5312_REV_MAJ_S 4
+#define AR5312_REV_MIN 0x0000000f
+#define AR5312_REV_MIN_S 0
+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR5312_REV_MAJ_AR5312 0x4
+#define AR5312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/*
+ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices
+ */
+#define AR5312_FLASHCTL0 0x0000
+#define AR5312_FLASHCTL1 0x0004
+#define AR5312_FLASHCTL2 0x0008
+
+/* AR5312_FLASHCTL register bit field definitions */
+#define AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */
+#define AR5312_FLASHCTL_IDCY_S 0
+#define AR5312_FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define AR5312_FLASHCTL_WST1_S 5
+#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define AR5312_FLASHCTL_WST2_S 11
+#define AR5312_FLASHCTL_AC 0x00070000 /* Flash addr check (added) */
+#define AR5312_FLASHCTL_AC_S 16
+#define AR5312_FLASHCTL_AC_128K 0x00000000
+#define AR5312_FLASHCTL_AC_256K 0x00010000
+#define AR5312_FLASHCTL_AC_512K 0x00020000
+#define AR5312_FLASHCTL_AC_1M 0x00030000
+#define AR5312_FLASHCTL_AC_2M 0x00040000
+#define AR5312_FLASHCTL_AC_4M 0x00050000
+#define AR5312_FLASHCTL_AC_8M 0x00060000
+#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define AR5312_FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define AR5312_FLASHCTL_BUSERR 0x01000000 /* Bus transfer error flag */
+#define AR5312_FLASHCTL_WPERR 0x02000000 /* Write protect error flag */
+#define AR5312_FLASHCTL_WP 0x04000000 /* Write protect */
+#define AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */
+#define AR5312_FLASHCTL_MW 0x30000000 /* Mem width */
+#define AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */
+#define AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */
+#define AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */
+#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */
+#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */
+#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */
+
+/*
+ * ARM SDRAM Controller -- just enough to determine memory size
+ */
+#define AR5312_MEM_CFG1 0x0004
+
+#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC0_S 8
+#define AR5312_MEM_CFG1_AC1_M 0x00007000 /* bank 1: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC1_S 12
+
+#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */
diff --git a/arch/mips/ath25/board.c b/arch/mips/ath25/board.c
new file mode 100644
index 000000000000..b8bb78282d6a
--- /dev/null
+++ b/arch/mips/ath25/board.c
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+void (*ath25_irq_dispatch)(void);
+
+static inline bool check_radio_magic(const void __iomem *addr)
+{
+ addr += 0x7a; /* offset for flash magic */
+ return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5);
+}
+
+static inline bool check_notempty(const void __iomem *addr)
+{
+ return __raw_readl(addr) != 0xffffffff;
+}
+
+static inline bool check_board_data(const void __iomem *addr, bool broken)
+{
+ /* config magic found */
+ if (__raw_readl(addr) == ATH25_BD_MAGIC)
+ return true;
+
+ if (!broken)
+ return false;
+
+ /* broken board data detected, use radio data to find the
+ * offset, user will fix this */
+
+ if (check_radio_magic(addr + 0x1000))
+ return true;
+ if (check_radio_magic(addr + 0xf8))
+ return true;
+
+ return false;
+}
+
+static const void __iomem * __init find_board_config(const void __iomem *limit,
+ const bool broken)
+{
+ const void __iomem *addr;
+ const void __iomem *begin = limit - 0x1000;
+ const void __iomem *end = limit - 0x30000;
+
+ for (addr = begin; addr >= end; addr -= 0x1000)
+ if (check_board_data(addr, broken))
+ return addr;
+
+ return NULL;
+}
+
+static const void __iomem * __init find_radio_config(const void __iomem *limit,
+ const void __iomem *bcfg)
+{
+ const void __iomem *rcfg, *begin, *end;
+
+ /*
+ * Now find the start of Radio Configuration data, using heuristics:
+ * Search forward from Board Configuration data by 0x1000 bytes
+ * at a time until we find non-0xffffffff.
+ */
+ begin = bcfg + 0x1000;
+ end = limit;
+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
+ return rcfg;
+
+ /* AR2316 relocates radio config to new location */
+ begin = bcfg + 0xf8;
+ end = limit - 0x1000 + 0xf8;
+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
+ return rcfg;
+
+ return NULL;
+}
+
+/*
+ * NB: Search region size could be larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+int __init ath25_find_config(phys_addr_t base, unsigned long size)
+{
+ const void __iomem *flash_base, *flash_limit;
+ struct ath25_boarddata *config;
+ unsigned int rcfg_size;
+ int broken_boarddata = 0;
+ const void __iomem *bcfg, *rcfg;
+ u8 *board_data;
+ u8 *radio_data;
+ u8 *mac_addr;
+ u32 offset;
+
+ flash_base = ioremap_nocache(base, size);
+ flash_limit = flash_base + size;
+
+ ath25_board.config = NULL;
+ ath25_board.radio = NULL;
+
+ /* Copy the board and radio data to RAM, because accessing the mapped
+ * memory of the flash directly after booting is not safe */
+
+ /* Try to find valid board and radio data */
+ bcfg = find_board_config(flash_limit, false);
+
+ /* If that fails, try to at least find valid radio data */
+ if (!bcfg) {
+ bcfg = find_board_config(flash_limit, true);
+ broken_boarddata = 1;
+ }
+
+ if (!bcfg) {
+ pr_warn("WARNING: No board configuration data found!\n");
+ goto error;
+ }
+
+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+ ath25_board.config = (struct ath25_boarddata *)board_data;
+ memcpy_fromio(board_data, bcfg, 0x100);
+ if (broken_boarddata) {
+ pr_warn("WARNING: broken board data detected\n");
+ config = ath25_board.config;
+ if (is_zero_ether_addr(config->enet0_mac)) {
+ pr_info("Fixing up empty mac addresses\n");
+ config->reset_config_gpio = 0xffff;
+ config->sys_led_gpio = 0xffff;
+ random_ether_addr(config->wlan0_mac);
+ config->wlan0_mac[0] &= ~0x06;
+ random_ether_addr(config->enet0_mac);
+ random_ether_addr(config->enet1_mac);
+ }
+ }
+
+ /* Radio config starts 0x100 bytes after board config, regardless
+ * of what the physical layout on the flash chip looks like */
+
+ rcfg = find_radio_config(flash_limit, bcfg);
+ if (!rcfg) {
+ pr_warn("WARNING: Could not find Radio Configuration data\n");
+ goto error;
+ }
+
+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
+ ath25_board.radio = radio_data;
+ offset = radio_data - board_data;
+ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
+ offset);
+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
+ memcpy_fromio(radio_data, rcfg, rcfg_size);
+
+ mac_addr = &radio_data[0x1d * 2];
+ if (is_broadcast_ether_addr(mac_addr)) {
+ pr_info("Radio MAC is blank; using board-data\n");
+ ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac);
+ }
+
+ iounmap(flash_base);
+
+ return 0;
+
+error:
+ iounmap(flash_base);
+ return -ENODEV;
+}
+
+static void ath25_halt(void)
+{
+ local_irq_disable();
+ unreachable();
+}
+
+void __init plat_mem_setup(void)
+{
+ _machine_halt = ath25_halt;
+ pm_power_off = ath25_halt;
+
+ if (is_ar5312())
+ ar5312_plat_mem_setup();
+ else
+ ar2315_plat_mem_setup();
+
+ /* Disable data watchpoints */
+ write_c0_watchlo0(0);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ ath25_irq_dispatch();
+}
+
+void __init plat_time_init(void)
+{
+ if (is_ar5312())
+ ar5312_plat_time_init();
+ else
+ ar2315_plat_time_init();
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init arch_init_irq(void)
+{
+ clear_c0_status(ST0_IM);
+ mips_cpu_irq_init();
+
+ /* Initialize interrupt controllers */
+ if (is_ar5312())
+ ar5312_arch_init_irq();
+ else
+ ar2315_arch_init_irq();
+}
diff --git a/arch/mips/ath25/devices.c b/arch/mips/ath25/devices.c
new file mode 100644
index 000000000000..7a64567d1ac3
--- /dev/null
+++ b/arch/mips/ath25/devices.c
@@ -0,0 +1,125 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+
+#include <ath25_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+struct ar231x_board_config ath25_board;
+enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
+
+static struct resource ath25_wmac0_res[] = {
+ {
+ .name = "wmac0_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "wmac0_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource ath25_wmac1_res[] = {
+ {
+ .name = "wmac1_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "wmac1_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device ath25_wmac[] = {
+ {
+ .id = 0,
+ .name = "ar231x-wmac",
+ .resource = ath25_wmac0_res,
+ .num_resources = ARRAY_SIZE(ath25_wmac0_res),
+ .dev.platform_data = &ath25_board,
+ },
+ {
+ .id = 1,
+ .name = "ar231x-wmac",
+ .resource = ath25_wmac1_res,
+ .num_resources = ARRAY_SIZE(ath25_wmac1_res),
+ .dev.platform_data = &ath25_board,
+ },
+};
+
+static const char * const soc_type_strings[] = {
+ [ATH25_SOC_AR5312] = "Atheros AR5312",
+ [ATH25_SOC_AR2312] = "Atheros AR2312",
+ [ATH25_SOC_AR2313] = "Atheros AR2313",
+ [ATH25_SOC_AR2315] = "Atheros AR2315",
+ [ATH25_SOC_AR2316] = "Atheros AR2316",
+ [ATH25_SOC_AR2317] = "Atheros AR2317",
+ [ATH25_SOC_AR2318] = "Atheros AR2318",
+ [ATH25_SOC_UNKNOWN] = "Atheros (unknown)",
+};
+
+const char *get_system_type(void)
+{
+ if ((ath25_soc >= ARRAY_SIZE(soc_type_strings)) ||
+ !soc_type_strings[ath25_soc])
+ return soc_type_strings[ATH25_SOC_UNKNOWN];
+ return soc_type_strings[ath25_soc];
+}
+
+void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
+{
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
+ s.iotype = UPIO_MEM32;
+ s.irq = irq;
+ s.regshift = 2;
+ s.mapbase = mapbase;
+ s.uartclk = uartclk;
+
+ early_serial_setup(&s);
+}
+
+int __init ath25_add_wmac(int nr, u32 base, int irq)
+{
+ struct resource *res;
+
+ ath25_wmac[nr].dev.platform_data = &ath25_board;
+ res = &ath25_wmac[nr].resource[0];
+ res->start = base;
+ res->end = base + 0x10000 - 1;
+ res++;
+ res->start = irq;
+ res->end = irq;
+ return platform_device_register(&ath25_wmac[nr]);
+}
+
+static int __init ath25_register_devices(void)
+{
+ if (is_ar5312())
+ ar5312_init_devices();
+ else
+ ar2315_init_devices();
+
+ return 0;
+}
+
+device_initcall(ath25_register_devices);
+
+static int __init ath25_arch_init(void)
+{
+ if (is_ar5312())
+ ar5312_arch_init();
+ else
+ ar2315_arch_init();
+
+ return 0;
+}
+
+arch_initcall(ath25_arch_init);
diff --git a/arch/mips/ath25/devices.h b/arch/mips/ath25/devices.h
new file mode 100644
index 000000000000..04d414115356
--- /dev/null
+++ b/arch/mips/ath25/devices.h
@@ -0,0 +1,43 @@
+#ifndef __ATH25_DEVICES_H
+#define __ATH25_DEVICES_H
+
+#include <linux/cpu.h>
+
+#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
+
+#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
+
+enum ath25_soc_type {
+ /* handled by ar5312.c */
+ ATH25_SOC_AR2312,
+ ATH25_SOC_AR2313,
+ ATH25_SOC_AR5312,
+
+ /* handled by ar2315.c */
+ ATH25_SOC_AR2315,
+ ATH25_SOC_AR2316,
+ ATH25_SOC_AR2317,
+ ATH25_SOC_AR2318,
+
+ ATH25_SOC_UNKNOWN
+};
+
+extern enum ath25_soc_type ath25_soc;
+extern struct ar231x_board_config ath25_board;
+extern void (*ath25_irq_dispatch)(void);
+
+int ath25_find_config(phys_addr_t offset, unsigned long size);
+void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
+int ath25_add_wmac(int nr, u32 base, int irq);
+
+static inline bool is_ar2315(void)
+{
+ return (current_cpu_data.cputype == CPU_4KEC);
+}
+
+static inline bool is_ar5312(void)
+{
+ return !is_ar2315();
+}
+
+#endif
diff --git a/arch/mips/ath25/early_printk.c b/arch/mips/ath25/early_printk.c
new file mode 100644
index 000000000000..36035b628161
--- /dev/null
+++ b/arch/mips/ath25/early_printk.c
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#include "devices.h"
+#include "ar2315_regs.h"
+#include "ar5312_regs.h"
+
+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
+ unsigned char ch)
+{
+ __raw_writel(ch, base + 4 * reg);
+}
+
+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
+{
+ return __raw_readl(base + 4 * reg);
+}
+
+void prom_putchar(unsigned char ch)
+{
+ static void __iomem *base;
+
+ if (unlikely(base == NULL)) {
+ if (is_ar2315())
+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0_BASE));
+ else
+ base = (void __iomem *)(KSEG1ADDR(AR5312_UART0_BASE));
+ }
+
+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+ prom_uart_wr(base, UART_TX, ch);
+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+}
diff --git a/arch/mips/ath25/prom.c b/arch/mips/ath25/prom.c
new file mode 100644
index 000000000000..edf82be8870d
--- /dev/null
+++ b/arch/mips/ath25/prom.c
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for AR5312/AR231x SoCs
+ */
+
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+void __init prom_init(void)
+{
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 9c0e1761773f..6adae366f11a 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -359,7 +359,6 @@ void __init arch_init_irq(void)
BUG();
}
- cp0_perfcount_irq = ATH79_MISC_IRQ(5);
mips_cpu_irq_init();
ath79_misc_irq_init();
diff --git a/arch/mips/ath79/prom.c b/arch/mips/ath79/prom.c
index e9cbd7c2918f..e1fe63051136 100644
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -13,42 +13,24 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/string.h>
+#include <linux/initrd.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
+#include <asm/fw/fw.h>
#include "common.h"
-static inline int is_valid_ram_addr(void *addr)
-{
- if (((u32) addr > KSEG0) &&
- ((u32) addr < (KSEG0 + ATH79_MEM_SIZE_MAX)))
- return 1;
-
- if (((u32) addr > KSEG1) &&
- ((u32) addr < (KSEG1 + ATH79_MEM_SIZE_MAX)))
- return 1;
-
- return 0;
-}
-
-static __init void ath79_prom_init_cmdline(int argc, char **argv)
-{
- int i;
-
- if (!is_valid_ram_addr(argv))
- return;
-
- for (i = 0; i < argc; i++)
- if (is_valid_ram_addr(argv[i])) {
- strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
- strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline));
- }
-}
-
void __init prom_init(void)
{
- ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+ fw_init_cmdline();
+
+ /* Read the initrd address from the firmware environment */
+ initrd_start = fw_getenvl("initrd_start");
+ if (initrd_start) {
+ initrd_start = KSEG0ADDR(initrd_start);
+ initrd_end = initrd_start + fw_getenvl("initrd_size");
+ }
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 64807a4809d0..a73c93c3d44a 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -182,6 +182,11 @@ const char *get_system_type(void)
return ath79_sys_type;
}
+int get_c0_perfcount_int(void)
+{
+ return ATH79_MISC_IRQ(5);
+}
+
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
diff --git a/arch/mips/bcm3384/Makefile b/arch/mips/bcm3384/Makefile
new file mode 100644
index 000000000000..a393955cba08
--- /dev/null
+++ b/arch/mips/bcm3384/Makefile
@@ -0,0 +1 @@
+obj-y += setup.o irq.o dma.o
diff --git a/arch/mips/bcm3384/Platform b/arch/mips/bcm3384/Platform
new file mode 100644
index 000000000000..8e1ca0819e1b
--- /dev/null
+++ b/arch/mips/bcm3384/Platform
@@ -0,0 +1,7 @@
+#
+# Broadcom BCM3384 boards
+#
+platform-$(CONFIG_BCM3384) += bcm3384/
+cflags-$(CONFIG_BCM3384) += \
+ -I$(srctree)/arch/mips/include/asm/mach-bcm3384/
+load-$(CONFIG_BCM3384) := 0xffffffff80010000
diff --git a/arch/mips/bcm3384/dma.c b/arch/mips/bcm3384/dma.c
new file mode 100644
index 000000000000..ea42012fd4f5
--- /dev/null
+++ b/arch/mips/bcm3384/dma.c
@@ -0,0 +1,81 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <dma-coherence.h>
+
+/*
+ * BCM3384 has configurable address translation windows which allow the
+ * peripherals' DMA addresses to be different from the Zephyr-visible
+ * physical addresses. e.g. usb_dma_addr = zephyr_pa ^ 0x08000000
+ *
+ * If our DT "memory" node has a "dma-xor-mask" property we will enable this
+ * translation using the provided offset.
+ */
+static u32 bcm3384_dma_xor_mask;
+static u32 bcm3384_dma_xor_limit = 0xffffffff;
+
+/*
+ * PCI collapses the memory hole at 0x10000000 - 0x1fffffff.
+ * On systems with a dma-xor-mask, this range is guaranteed to live above
+ * the dma-xor-limit.
+ */
+#define BCM3384_MEM_HOLE_PA 0x10000000
+#define BCM3384_MEM_HOLE_SIZE 0x10000000
+
+static dma_addr_t bcm3384_phys_to_dma(struct device *dev, phys_addr_t pa)
+{
+ if (dev && dev_is_pci(dev) &&
+ pa >= (BCM3384_MEM_HOLE_PA + BCM3384_MEM_HOLE_SIZE))
+ return pa - BCM3384_MEM_HOLE_SIZE;
+ if (pa <= bcm3384_dma_xor_limit)
+ return pa ^ bcm3384_dma_xor_mask;
+ return pa;
+}
+
+dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+ return bcm3384_phys_to_dma(dev, virt_to_phys(addr));
+}
+
+dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ return bcm3384_phys_to_dma(dev, page_to_phys(page));
+}
+
+unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+ if (dev && dev_is_pci(dev) &&
+ dma_addr >= BCM3384_MEM_HOLE_PA)
+ return dma_addr + BCM3384_MEM_HOLE_SIZE;
+ if ((dma_addr ^ bcm3384_dma_xor_mask) <= bcm3384_dma_xor_limit)
+ return dma_addr ^ bcm3384_dma_xor_mask;
+ return dma_addr;
+}
+
+static int __init bcm3384_init_dma_xor(void)
+{
+ struct device_node *np = of_find_node_by_type(NULL, "memory");
+
+ if (!np)
+ return 0;
+
+ of_property_read_u32(np, "dma-xor-mask", &bcm3384_dma_xor_mask);
+ of_property_read_u32(np, "dma-xor-limit", &bcm3384_dma_xor_limit);
+
+ of_node_put(np);
+ return 0;
+}
+arch_initcall(bcm3384_init_dma_xor);
diff --git a/arch/mips/bcm3384/irq.c b/arch/mips/bcm3384/irq.c
new file mode 100644
index 000000000000..0fb5134fb832
--- /dev/null
+++ b/arch/mips/bcm3384/irq.c
@@ -0,0 +1,193 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Partially based on arch/mips/ralink/irq.c
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
+ */
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/bmips.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+/* INTC register offsets */
+#define INTC_REG_ENABLE 0x00
+#define INTC_REG_STATUS 0x04
+
+#define MAX_WORDS 2
+#define IRQS_PER_WORD 32
+
+struct bcm3384_intc {
+ int n_words;
+ void __iomem *reg[MAX_WORDS];
+ u32 enable[MAX_WORDS];
+ spinlock_t lock;
+};
+
+static void bcm3384_intc_irq_unmask(struct irq_data *d)
+{
+ struct bcm3384_intc *priv = d->domain->host_data;
+ unsigned long flags;
+ int idx = d->hwirq / IRQS_PER_WORD;
+ int bit = d->hwirq % IRQS_PER_WORD;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->enable[idx] |= BIT(bit);
+ __raw_writel(priv->enable[idx], priv->reg[idx] + INTC_REG_ENABLE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void bcm3384_intc_irq_mask(struct irq_data *d)
+{
+ struct bcm3384_intc *priv = d->domain->host_data;
+ unsigned long flags;
+ int idx = d->hwirq / IRQS_PER_WORD;
+ int bit = d->hwirq % IRQS_PER_WORD;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->enable[idx] &= ~BIT(bit);
+ __raw_writel(priv->enable[idx], priv->reg[idx] + INTC_REG_ENABLE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static struct irq_chip bcm3384_intc_irq_chip = {
+ .name = "INTC",
+ .irq_unmask = bcm3384_intc_irq_unmask,
+ .irq_mask = bcm3384_intc_irq_mask,
+ .irq_mask_ack = bcm3384_intc_irq_mask,
+};
+
+unsigned int get_c0_compare_int(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
+
+static void bcm3384_intc_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_domain *domain = irq_get_handler_data(irq);
+ struct bcm3384_intc *priv = domain->host_data;
+ unsigned long flags;
+ unsigned int idx;
+
+ for (idx = 0; idx < priv->n_words; idx++) {
+ unsigned long pending;
+ int hwirq;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pending = __raw_readl(priv->reg[idx] + INTC_REG_STATUS) &
+ priv->enable[idx];
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ for_each_set_bit(hwirq, &pending, IRQS_PER_WORD) {
+ generic_handle_irq(irq_find_mapping(domain,
+ hwirq + idx * IRQS_PER_WORD));
+ }
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned long pending =
+ (read_c0_status() & read_c0_cause() & ST0_IM) >> STATUSB_IP0;
+ int bit;
+
+ for_each_set_bit(bit, &pending, 8)
+ do_IRQ(MIPS_CPU_IRQ_BASE + bit);
+}
+
+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &bcm3384_intc_irq_chip, handle_level_irq);
+ return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = intc_map,
+};
+
+static int __init ioremap_one_pair(struct bcm3384_intc *priv,
+ struct device_node *node,
+ int idx)
+{
+ struct resource res;
+
+ if (of_address_to_resource(node, idx, &res))
+ return 0;
+
+ if (request_mem_region(res.start, resource_size(&res),
+ res.name) < 0)
+ pr_err("Failed to request INTC register region\n");
+
+ priv->reg[idx] = ioremap_nocache(res.start, resource_size(&res));
+ if (!priv->reg[idx])
+ panic("Failed to ioremap INTC register range");
+
+ /* start up with everything masked before we hook the parent IRQ */
+ __raw_writel(0, priv->reg[idx] + INTC_REG_ENABLE);
+ priv->enable[idx] = 0;
+
+ return IRQS_PER_WORD;
+}
+
+static int __init intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain;
+ unsigned int parent_irq, n_irqs = 0;
+ struct bcm3384_intc *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ panic("Failed to allocate bcm3384_intc struct");
+
+ spin_lock_init(&priv->lock);
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq)
+ panic("Failed to get INTC IRQ");
+
+ n_irqs += ioremap_one_pair(priv, node, 0);
+ n_irqs += ioremap_one_pair(priv, node, 1);
+
+ if (!n_irqs)
+ panic("Failed to map INTC registers");
+
+ priv->n_words = n_irqs / IRQS_PER_WORD;
+ domain = irq_domain_add_linear(node, n_irqs, &irq_domain_ops, priv);
+ if (!domain)
+ panic("Failed to add irqdomain");
+
+ irq_set_chained_handler(parent_irq, bcm3384_intc_irq_handler);
+ irq_set_handler_data(parent_irq, domain);
+
+ return 0;
+}
+
+static struct of_device_id of_irq_ids[] __initdata = {
+ { .compatible = "mti,cpu-interrupt-controller",
+ .data = mips_cpu_intc_init },
+ { .compatible = "brcm,bcm3384-intc",
+ .data = intc_of_init },
+ {},
+};
+
+void __init arch_init_irq(void)
+{
+ bmips_tp1_irqs = 0;
+ of_irq_init(of_irq_ids);
+}
diff --git a/arch/mips/bcm3384/setup.c b/arch/mips/bcm3384/setup.c
new file mode 100644
index 000000000000..d84b8400b874
--- /dev/null
+++ b/arch/mips/bcm3384/setup.c
@@ -0,0 +1,97 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/clk-provider.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/smp.h>
+#include <asm/addrspace.h>
+#include <asm/bmips.h>
+#include <asm/bootinfo.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+void __init prom_init(void)
+{
+ register_bmips_smp_ops();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+ return "BCM3384";
+}
+
+void __init plat_time_init(void)
+{
+ struct device_node *np;
+ u32 freq;
+
+ np = of_find_node_by_name(NULL, "cpus");
+ if (!np)
+ panic("missing 'cpus' DT node");
+ if (of_property_read_u32(np, "mips-hpt-frequency", &freq) < 0)
+ panic("missing 'mips-hpt-frequency' property");
+ of_node_put(np);
+
+ mips_hpt_frequency = freq;
+}
+
+void __init plat_mem_setup(void)
+{
+ void *dtb = __dtb_start;
+
+ set_io_port_base(0);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+
+ /* intended to somewhat resemble ARM; see Documentation/arm/Booting */
+ if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
+ dtb = phys_to_virt(fw_arg2);
+
+ __dt_setup_arch(dtb);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
+void __init device_tree_init(void)
+{
+ struct device_node *np;
+
+ unflatten_and_copy_device_tree();
+
+ /* Disable SMP boot unless both CPUs are listed in DT and !disabled */
+ np = of_find_node_by_name(NULL, "cpus");
+ if (np && of_get_available_child_count(np) <= 1)
+ bmips_smp_enabled = 0;
+ of_node_put(np);
+}
+
+int __init plat_of_setup(void)
+{
+ return __dt_register_buses("brcm,bcm3384", "simple-bus");
+}
+
+arch_initcall(plat_of_setup);
+
+static int __init plat_dev_init(void)
+{
+ of_clk_init(NULL);
+ return 0;
+}
+
+device_initcall(plat_dev_init);
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index f1cc9d0495d8..ea909a56a3ee 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -6,12 +6,18 @@
/* prom.c */
void __init bcm47xx_prom_highmem_init(void);
+/* sprom.c */
+void bcm47xx_sprom_register_fallbacks(void);
+
/* buttons.c */
int __init bcm47xx_buttons_register(void);
/* leds.c */
void __init bcm47xx_leds_register(void);
+/* setup.c */
+void __init bcm47xx_bus_setup(void);
+
/* workarounds.c */
void __init bcm47xx_workarounds(void);
diff --git a/arch/mips/bcm47xx/irq.c b/arch/mips/bcm47xx/irq.c
index e0585b76ec19..21b4497f09be 100644
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -22,6 +22,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "bcm47xx_private.h"
+
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -65,6 +67,12 @@ DEFINE_HWx_IRQDISPATCH(7)
void __init arch_init_irq(void)
{
+ /*
+ * This is the first arch callback after mm_init (we can use kmalloc),
+ * so let's finish bus initialization now.
+ */
+ bcm47xx_bus_setup();
+
#ifdef CONFIG_BCM47XX_BCMA
if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 2bed73a684ae..c5c381c43f17 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -13,24 +13,35 @@
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/ssb/ssb.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <asm/addrspace.h>
+#include <linux/mtd/mtd.h>
#include <bcm47xx_nvram.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
+
+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
+#define NVRAM_SPACE 0x8000
+
+#define FLASH_MIN 0x00020000 /* Minimum flash size */
+
+struct nvram_header {
+ u32 magic;
+ u32 len;
+ u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+ u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
+ u32 config_ncdl; /* ncdl values for memc */
+};
static char nvram_buf[NVRAM_SPACE];
static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-static u32 find_nvram_size(u32 end)
+static u32 find_nvram_size(void __iomem *end)
{
- struct nvram_header *header;
+ struct nvram_header __iomem *header;
int i;
for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
- header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]);
- if (header->magic == NVRAM_HEADER)
+ header = (struct nvram_header *)(end - nvram_sizes[i]);
+ if (header->magic == NVRAM_MAGIC)
return nvram_sizes[i];
}
@@ -38,36 +49,40 @@ static u32 find_nvram_size(u32 end)
}
/* Probe for NVRAM header */
-static int nvram_find_and_copy(u32 base, u32 lim)
+static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
{
- struct nvram_header *header;
+ struct nvram_header __iomem *header;
int i;
u32 off;
u32 *src, *dst;
u32 size;
+ if (nvram_buf[0]) {
+ pr_warn("nvram already initialized\n");
+ return -EEXIST;
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
/* Windowed flash access */
- size = find_nvram_size(base + off);
+ size = find_nvram_size(iobase + off);
if (size) {
- header = (struct nvram_header *)KSEG1ADDR(base + off -
- size);
+ header = (struct nvram_header *)(iobase + off - size);
goto found;
}
off <<= 1;
}
/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
- header = (struct nvram_header *) KSEG1ADDR(base + 4096);
- if (header->magic == NVRAM_HEADER) {
+ header = (struct nvram_header *)(iobase + 4096);
+ if (header->magic == NVRAM_MAGIC) {
size = NVRAM_SPACE;
goto found;
}
- header = (struct nvram_header *) KSEG1ADDR(base + 1024);
- if (header->magic == NVRAM_HEADER) {
+ header = (struct nvram_header *)(iobase + 1024);
+ if (header->magic == NVRAM_MAGIC) {
size = NVRAM_SPACE;
goto found;
}
@@ -94,71 +109,73 @@ found:
return 0;
}
-#ifdef CONFIG_BCM47XX_SSB
-static int nvram_init_ssb(void)
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
{
- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
- u32 base;
- u32 lim;
-
- if (mcore->pflash.present) {
- base = mcore->pflash.window;
- lim = mcore->pflash.window_size;
- } else {
- pr_err("Couldn't find supported flash memory\n");
- return -ENXIO;
- }
+ void __iomem *iobase;
+ int err;
- return nvram_find_and_copy(base, lim);
-}
-#endif
+ iobase = ioremap_nocache(base, lim);
+ if (!iobase)
+ return -ENOMEM;
-#ifdef CONFIG_BCM47XX_BCMA
-static int nvram_init_bcma(void)
-{
- struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
- u32 base;
- u32 lim;
-
-#ifdef CONFIG_BCMA_NFLASH
- if (cc->nflash.boot) {
- base = BCMA_SOC_FLASH1;
- lim = BCMA_SOC_FLASH1_SZ;
- } else
-#endif
- if (cc->pflash.present) {
- base = cc->pflash.window;
- lim = cc->pflash.window_size;
-#ifdef CONFIG_BCMA_SFLASH
- } else if (cc->sflash.present) {
- base = cc->sflash.window;
- lim = cc->sflash.size;
-#endif
- } else {
- pr_err("Couldn't find supported flash memory\n");
- return -ENXIO;
- }
+ err = nvram_find_and_copy(iobase, lim);
+
+ iounmap(iobase);
- return nvram_find_and_copy(base, lim);
+ return err;
}
-#endif
static int nvram_init(void)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return nvram_init_ssb();
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return nvram_init_bcma();
-#endif
+#ifdef CONFIG_MTD
+ struct mtd_info *mtd;
+ struct nvram_header header;
+ size_t bytes_read;
+ int err, i;
+
+ mtd = get_mtd_device_nm("nvram");
+ if (IS_ERR(mtd))
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+ loff_t from = mtd->size - nvram_sizes[i];
+
+ if (from < 0)
+ continue;
+
+ err = mtd_read(mtd, from, sizeof(header), &bytes_read,
+ (uint8_t *)&header);
+ if (!err && header.magic == NVRAM_MAGIC) {
+ u8 *dst = (uint8_t *)nvram_buf;
+ size_t len = header.len;
+
+ if (header.len > NVRAM_SPACE) {
+ pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+ header.len, NVRAM_SPACE);
+ len = NVRAM_SPACE;
+ }
+
+ err = mtd_read(mtd, from, len, &bytes_read, dst);
+ if (err)
+ return err;
+ memset(dst + bytes_read, 0x0, NVRAM_SPACE - bytes_read);
+
+ return 0;
+ }
}
+#endif
+
return -ENXIO;
}
-int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len)
+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
{
char *var, *value, *end, *eq;
int err;
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index c00585d915bc..e43b5046cb30 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -102,23 +102,6 @@ static void bcm47xx_machine_halt(void)
}
#ifdef CONFIG_BCM47XX_SSB
-static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
-{
- char prefix[10];
-
- if (bus->bustype == SSB_BUSTYPE_PCI) {
- memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
- } else {
- printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-}
-
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
@@ -144,11 +127,6 @@ static void __init bcm47xx_register_ssb(void)
char buf[100];
struct ssb_mipscore *mcore;
- err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
- if (err)
- printk(KERN_WARNING "bcm47xx: someone else already registered"
- " a ssb SPROM callback handler (err %d)\n", err);
-
err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
@@ -171,56 +149,21 @@ static void __init bcm47xx_register_ssb(void)
#endif
#ifdef CONFIG_BCM47XX_BCMA
-static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
-{
- char prefix[10];
- struct bcma_device *core;
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
- memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
- case BCMA_HOSTTYPE_SOC:
- memset(out, 0, sizeof(struct ssb_sprom));
- core = bcma_find_core(bus, BCMA_CORE_80211);
- if (core) {
- snprintf(prefix, sizeof(prefix), "sb/%u/",
- core->core_index);
- bcm47xx_fill_sprom(out, prefix, true);
- } else {
- bcm47xx_fill_sprom(out, NULL, false);
- }
- return 0;
- default:
- pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-}
-
static void __init bcm47xx_register_bcma(void)
{
int err;
- err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma);
- if (err)
- pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err);
-
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to register BCMA bus (err %d)", err);
-
- err = bcma_host_soc_init(&bcm47xx_bus.bcma);
- if (err)
- panic("Failed to initialize BCMA bus (err %d)", err);
-
- bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
}
#endif
+/*
+ * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed
+ * to detect memory and record it with add_memory_region.
+ * Any extra initializaion performed here must not use kmalloc or bootmem.
+ */
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
@@ -229,6 +172,7 @@ void __init plat_mem_setup(void)
printk(KERN_INFO "bcm47xx: using bcma bus\n");
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
+ bcm47xx_sprom_register_fallbacks();
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#ifdef CONFIG_HIGHMEM
@@ -239,6 +183,7 @@ void __init plat_mem_setup(void)
printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_sprom_register_fallbacks();
bcm47xx_register_ssb();
bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
#endif
@@ -247,6 +192,28 @@ void __init plat_mem_setup(void)
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
+}
+
+/*
+ * This finishes bus initialization doing things that were not possible without
+ * kmalloc. Make sure to call it late enough (after mm_init).
+ */
+void __init bcm47xx_bus_setup(void)
+{
+#ifdef CONFIG_BCM47XX_BCMA
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
+ int err;
+
+ err = bcma_host_soc_init(&bcm47xx_bus.bcma);
+ if (err)
+ panic("Failed to initialize BCMA bus (err %d)", err);
+
+ bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo,
+ NULL);
+ }
+#endif
+
+ /* With bus initialized we can access NVRAM and detect the board */
bcm47xx_board_detect();
mips_set_machine_name(bcm47xx_board_get_name());
}
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 41226b68de3d..2eff7fe99c6b 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -136,6 +136,20 @@ static void nvram_read_leddc(const char *prefix, const char *name,
*leddc_off_time = (val >> 16) & 0xff;
}
+static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
+{
+ if (strchr(buf, ':'))
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
+ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+ &macaddr[5]);
+ else if (strchr(buf, '-'))
+ sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
+ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+ &macaddr[5]);
+ else
+ pr_warn("Can not parse mac address: %s\n", buf);
+}
+
static void nvram_read_macaddr(const char *prefix, const char *name,
u8 val[6], bool fallback)
{
@@ -801,3 +815,71 @@ void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
}
#endif
+
+#if defined(CONFIG_BCM47XX_SSB)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ memset(out, 0, sizeof(struct ssb_sprom));
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix, false);
+ return 0;
+ } else {
+ pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+#endif
+
+#if defined(CONFIG_BCM47XX_BCMA)
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+ struct bcma_device *core;
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ memset(out, 0, sizeof(struct ssb_sprom));
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix, false);
+ return 0;
+ case BCMA_HOSTTYPE_SOC:
+ memset(out, 0, sizeof(struct ssb_sprom));
+ core = bcma_find_core(bus, BCMA_CORE_80211);
+ if (core) {
+ snprintf(prefix, sizeof(prefix), "sb/%u/",
+ core->core_index);
+ bcm47xx_fill_sprom(out, prefix, true);
+ } else {
+ bcm47xx_fill_sprom(out, NULL, false);
+ }
+ return 0;
+ default:
+ pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+#endif
+
+/*
+ * On bcm47xx we need to register SPROM fallback handler very early, so we can't
+ * use anything like platform device / driver for this.
+ */
+void bcm47xx_sprom_register_fallbacks(void)
+{
+#if defined(CONFIG_BCM47XX_SSB)
+ if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
+ pr_warn("Failed to registered ssb SPROM handler\n");
+#endif
+
+#if defined(CONFIG_BCM47XX_BCMA)
+ if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
+ pr_warn("Failed to registered bcma SPROM handler\n");
+#endif
+}
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 536f64443031..307ec8b8e41c 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -263,7 +263,7 @@ static unsigned int detect_memory_size(void)
if (BCMCPU_IS_6345()) {
val = bcm_sdram_readl(SDRAM_MBASE_REG);
- return (val * 8 * 1024 * 1024);
+ return val * 8 * 1024 * 1024;
}
if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index ca9c90e2cabf..4f49fa477f14 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
diff --git a/arch/mips/boot/dts/bcm3384.dtsi b/arch/mips/boot/dts/bcm3384.dtsi
new file mode 100644
index 000000000000..21b074a99c94
--- /dev/null
+++ b/arch/mips/boot/dts/bcm3384.dtsi
@@ -0,0 +1,109 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384", "brcm,bcm33843";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* On BMIPS5000 this is 1/8th of the CPU core clock */
+ mips-hpt-frequency = <100000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ periph_clk: periph_clk@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc@0 {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ periph_intc: periph_intc@14e00038 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ zmips_intc: zmips_intc@104b0060 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x104b0060 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <29>;
+ };
+
+ iop_intc: iop_intc@14e00058 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x14e00058 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/bcm93384wvg.dts
new file mode 100644
index 000000000000..831741179212
--- /dev/null
+++ b/arch/mips/boot/dts/bcm93384wvg.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/include/ "bcm3384.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
+ model = "Broadcom BCM93384WVG";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x04000000>;
+ dma-xor-mask = <0x08000000>;
+ dma-xor-limit = <0x0fffffff>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 02f244475207..3778655c4a37 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -262,8 +262,8 @@ char *octeon_swiotlb;
void __init plat_swiotlb_setup(void)
{
int i;
- phys_t max_addr;
- phys_t addr_size;
+ phys_addr_t max_addr;
+ phys_addr_t addr_size;
size_t swiotlbsize;
unsigned long swiotlb_nslabs;
diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c
index f4c1b36fdf65..e15b049b3bd7 100644
--- a/arch/mips/cavium-octeon/executive/octeon-model.c
+++ b/arch/mips/cavium-octeon/executive/octeon-model.c
@@ -28,22 +28,23 @@
#include <asm/octeon/octeon.h>
/**
- * Given the chip processor ID from COP0, this function returns a
- * string representing the chip model number. The string is of the
- * form CNXXXXpX.X-FREQ-SUFFIX.
- * - XXXX = The chip model number
- * - X.X = Chip pass number
- * - FREQ = Current frequency in Mhz
- * - SUFFIX = NSP, EXP, SCP, SSP, or CP
- *
- * @chip_id: Chip ID
+ * Read a byte of fuse data
+ * @byte_addr: address to read
*
- * Returns Model string
+ * Returns fuse value: 0 or 1
*/
-const char *octeon_model_get_string(uint32_t chip_id)
+static uint8_t __init cvmx_fuse_read_byte(int byte_addr)
{
- static char buffer[32];
- return octeon_model_get_string_buffer(chip_id, buffer);
+ union cvmx_mio_fus_rcmd read_cmd;
+
+ read_cmd.u64 = 0;
+ read_cmd.s.addr = byte_addr;
+ read_cmd.s.pend = 1;
+ cvmx_write_csr(CVMX_MIO_FUS_RCMD, read_cmd.u64);
+ while ((read_cmd.u64 = cvmx_read_csr(CVMX_MIO_FUS_RCMD))
+ && read_cmd.s.pend)
+ ;
+ return read_cmd.s.dat;
}
/*
@@ -51,7 +52,8 @@ const char *octeon_model_get_string(uint32_t chip_id)
* as running early in u-boot static/global variables don't work when
* running from flash.
*/
-const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer)
+static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
+ char *buffer)
{
const char *family;
const char *core_model;
@@ -407,3 +409,22 @@ const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer)
sprintf(buffer, "CN%s%sp%s-%d-%s", family, core_model, pass, clock_mhz, suffix);
return buffer;
}
+
+/**
+ * Given the chip processor ID from COP0, this function returns a
+ * string representing the chip model number. The string is of the
+ * form CNXXXXpX.X-FREQ-SUFFIX.
+ * - XXXX = The chip model number
+ * - X.X = Chip pass number
+ * - FREQ = Current frequency in Mhz
+ * - SUFFIX = NSP, EXP, SCP, SSP, or CP
+ *
+ * @chip_id: Chip ID
+ *
+ * Returns Model string
+ */
+const char *__init octeon_model_get_string(uint32_t chip_id)
+{
+ static char buffer[32];
+ return octeon_model_get_string_buffer(chip_id, buffer);
+}
diff --git a/arch/mips/configs/bcm3384_defconfig b/arch/mips/configs/bcm3384_defconfig
new file mode 100644
index 000000000000..88711c28ff32
--- /dev/null
+++ b/arch/mips/configs/bcm3384_defconfig
@@ -0,0 +1,78 @@
+CONFIG_BCM3384=y
+CONFIG_HIGHMEM=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+# CONFIG_SECCOMP is not set
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_NO_HZ=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_EXPERT=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_BLK_DEV is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_USB_USBNET=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_EARLYCON_FORCE=y
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/fw/lib/cmdline.c b/arch/mips/fw/lib/cmdline.c
index ffd0345780ae..6ecda64ad184 100644
--- a/arch/mips/fw/lib/cmdline.c
+++ b/arch/mips/fw/lib/cmdline.c
@@ -68,7 +68,7 @@ char *fw_getenv(char *envname)
result = fw_envp(index + 1);
break;
} else if (fw_envp(index)[i] == '=') {
- result = (fw_envp(index + 1) + i);
+ result = fw_envp(index) + i + 1;
break;
}
}
@@ -88,13 +88,13 @@ unsigned long fw_getenvl(char *envname)
{
unsigned long envl = 0UL;
char *str;
- long val;
int tmp;
str = fw_getenv(envname);
if (str) {
- tmp = kstrtol(str, 0, &val);
- envl = (unsigned long)val;
+ tmp = kstrtoul(str, 0, &envl);
+ if (tmp)
+ envl = 0;
}
return envl;
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 6dd6bfc607e9..857da84cfc92 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -17,6 +17,7 @@
#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
+#include <asm/compiler.h>
#include <asm/cpu-features.h>
#include <asm/cmpxchg.h>
#include <asm/war.h>
@@ -40,95 +41,97 @@
*/
#define atomic_set(v, i) ((v)->counter = (i))
-#define ATOMIC_OP(op, c_op, asm_op) \
-static __inline__ void atomic_##op(int i, atomic_t * v) \
-{ \
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
- int temp; \
- \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- "1: ll %0, %1 # atomic_" #op " \n" \
- " " #asm_op " %0, %2 \n" \
- " sc %0, %1 \n" \
- " beqzl %0, 1b \n" \
- " .set mips0 \n" \
- : "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } else if (kernel_uses_llsc) { \
- int temp; \
- \
- do { \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- " ll %0, %1 # atomic_" #op "\n" \
- " " #asm_op " %0, %2 \n" \
- " sc %0, %1 \n" \
- " .set mips0 \n" \
- : "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } while (unlikely(!temp)); \
- } else { \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
- } \
-} \
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
-static __inline__ int atomic_##op##_return(int i, atomic_t * v) \
-{ \
- int result; \
- \
- smp_mb__before_llsc(); \
- \
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
- int temp; \
- \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- "1: ll %1, %2 # atomic_" #op "_return \n" \
- " " #asm_op " %0, %1, %3 \n" \
- " sc %0, %2 \n" \
- " beqzl %0, 1b \n" \
- " " #asm_op " %0, %1, %3 \n" \
- " .set mips0 \n" \
- : "=&r" (result), "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } else if (kernel_uses_llsc) { \
- int temp; \
- \
- do { \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- " ll %1, %2 # atomic_" #op "_return \n" \
- " " #asm_op " %0, %1, %3 \n" \
- " sc %0, %2 \n" \
- " .set mips0 \n" \
- : "=&r" (result), "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } while (unlikely(!result)); \
- \
- result = temp; result c_op i; \
- } else { \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- result = v->counter; \
- result c_op i; \
- v->counter = result; \
- raw_local_irq_restore(flags); \
- } \
- \
- smp_llsc_mb(); \
- \
- return result; \
+#define ATOMIC_OP(op, c_op, asm_op) \
+static __inline__ void atomic_##op(int i, atomic_t * v) \
+{ \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ int temp; \
+ \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ "1: ll %0, %1 # atomic_" #op " \n" \
+ " " #asm_op " %0, %2 \n" \
+ " sc %0, %1 \n" \
+ " beqzl %0, 1b \n" \
+ " .set mips0 \n" \
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } else if (kernel_uses_llsc) { \
+ int temp; \
+ \
+ do { \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ " ll %0, %1 # atomic_" #op "\n" \
+ " " #asm_op " %0, %2 \n" \
+ " sc %0, %1 \n" \
+ " .set mips0 \n" \
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } while (unlikely(!temp)); \
+ } else { \
+ unsigned long flags; \
+ \
+ raw_local_irq_save(flags); \
+ v->counter c_op i; \
+ raw_local_irq_restore(flags); \
+ } \
}
-#define ATOMIC_OPS(op, c_op, asm_op) \
- ATOMIC_OP(op, c_op, asm_op) \
+#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
+static __inline__ int atomic_##op##_return(int i, atomic_t * v) \
+{ \
+ int result; \
+ \
+ smp_mb__before_llsc(); \
+ \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ int temp; \
+ \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ "1: ll %1, %2 # atomic_" #op "_return \n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " sc %0, %2 \n" \
+ " beqzl %0, 1b \n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " .set mips0 \n" \
+ : "=&r" (result), "=&r" (temp), \
+ "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } else if (kernel_uses_llsc) { \
+ int temp; \
+ \
+ do { \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ " ll %1, %2 # atomic_" #op "_return \n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " sc %0, %2 \n" \
+ " .set mips0 \n" \
+ : "=&r" (result), "=&r" (temp), \
+ "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } while (unlikely(!result)); \
+ \
+ result = temp; result c_op i; \
+ } else { \
+ unsigned long flags; \
+ \
+ raw_local_irq_save(flags); \
+ result = v->counter; \
+ result c_op i; \
+ v->counter = result; \
+ raw_local_irq_restore(flags); \
+ } \
+ \
+ smp_llsc_mb(); \
+ \
+ return result; \
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op) \
+ ATOMIC_OP(op, c_op, asm_op) \
ATOMIC_OP_RETURN(op, c_op, asm_op)
ATOMIC_OPS(add, +=, addu)
@@ -167,8 +170,9 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
" .set reorder \n"
"1: \n"
" .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "+m" (v->counter)
- : "Ir" (i), "m" (v->counter)
+ : "=&r" (result), "=&r" (temp),
+ "+" GCC_OFF12_ASM() (v->counter)
+ : "Ir" (i), GCC_OFF12_ASM() (v->counter)
: "memory");
} else if (kernel_uses_llsc) {
int temp;
@@ -185,7 +189,8 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
" .set reorder \n"
"1: \n"
" .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "+m" (v->counter)
+ : "=&r" (result), "=&r" (temp),
+ "+" GCC_OFF12_ASM() (v->counter)
: "Ir" (i));
} else {
unsigned long flags;
@@ -315,96 +320,98 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
*/
#define atomic64_set(v, i) ((v)->counter = (i))
-#define ATOMIC64_OP(op, c_op, asm_op) \
-static __inline__ void atomic64_##op(long i, atomic64_t * v) \
-{ \
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
- long temp; \
- \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- "1: lld %0, %1 # atomic64_" #op " \n" \
- " " #asm_op " %0, %2 \n" \
- " scd %0, %1 \n" \
- " beqzl %0, 1b \n" \
- " .set mips0 \n" \
- : "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } else if (kernel_uses_llsc) { \
- long temp; \
- \
- do { \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- " lld %0, %1 # atomic64_" #op "\n" \
- " " #asm_op " %0, %2 \n" \
- " scd %0, %1 \n" \
- " .set mips0 \n" \
- : "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } while (unlikely(!temp)); \
- } else { \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
- } \
-} \
-
-#define ATOMIC64_OP_RETURN(op, c_op, asm_op) \
-static __inline__ long atomic64_##op##_return(long i, atomic64_t * v) \
-{ \
- long result; \
- \
- smp_mb__before_llsc(); \
- \
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
- long temp; \
- \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- "1: lld %1, %2 # atomic64_" #op "_return\n" \
- " " #asm_op " %0, %1, %3 \n" \
- " scd %0, %2 \n" \
- " beqzl %0, 1b \n" \
- " " #asm_op " %0, %1, %3 \n" \
- " .set mips0 \n" \
- : "=&r" (result), "=&r" (temp), "+m" (v->counter) \
- : "Ir" (i)); \
- } else if (kernel_uses_llsc) { \
- long temp; \
- \
- do { \
- __asm__ __volatile__( \
- " .set arch=r4000 \n" \
- " lld %1, %2 # atomic64_" #op "_return\n" \
- " " #asm_op " %0, %1, %3 \n" \
- " scd %0, %2 \n" \
- " .set mips0 \n" \
- : "=&r" (result), "=&r" (temp), "=m" (v->counter) \
- : "Ir" (i), "m" (v->counter) \
- : "memory"); \
- } while (unlikely(!result)); \
- \
- result = temp; result c_op i; \
- } else { \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- result = v->counter; \
- result c_op i; \
- v->counter = result; \
- raw_local_irq_restore(flags); \
- } \
- \
- smp_llsc_mb(); \
- \
- return result; \
+#define ATOMIC64_OP(op, c_op, asm_op) \
+static __inline__ void atomic64_##op(long i, atomic64_t * v) \
+{ \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ long temp; \
+ \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ "1: lld %0, %1 # atomic64_" #op " \n" \
+ " " #asm_op " %0, %2 \n" \
+ " scd %0, %1 \n" \
+ " beqzl %0, 1b \n" \
+ " .set mips0 \n" \
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } else if (kernel_uses_llsc) { \
+ long temp; \
+ \
+ do { \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ " lld %0, %1 # atomic64_" #op "\n" \
+ " " #asm_op " %0, %2 \n" \
+ " scd %0, %1 \n" \
+ " .set mips0 \n" \
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } while (unlikely(!temp)); \
+ } else { \
+ unsigned long flags; \
+ \
+ raw_local_irq_save(flags); \
+ v->counter c_op i; \
+ raw_local_irq_restore(flags); \
+ } \
+}
+
+#define ATOMIC64_OP_RETURN(op, c_op, asm_op) \
+static __inline__ long atomic64_##op##_return(long i, atomic64_t * v) \
+{ \
+ long result; \
+ \
+ smp_mb__before_llsc(); \
+ \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ long temp; \
+ \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ "1: lld %1, %2 # atomic64_" #op "_return\n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " scd %0, %2 \n" \
+ " beqzl %0, 1b \n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " .set mips0 \n" \
+ : "=&r" (result), "=&r" (temp), \
+ "+" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i)); \
+ } else if (kernel_uses_llsc) { \
+ long temp; \
+ \
+ do { \
+ __asm__ __volatile__( \
+ " .set arch=r4000 \n" \
+ " lld %1, %2 # atomic64_" #op "_return\n" \
+ " " #asm_op " %0, %1, %3 \n" \
+ " scd %0, %2 \n" \
+ " .set mips0 \n" \
+ : "=&r" (result), "=&r" (temp), \
+ "=" GCC_OFF12_ASM() (v->counter) \
+ : "Ir" (i), GCC_OFF12_ASM() (v->counter) \
+ : "memory"); \
+ } while (unlikely(!result)); \
+ \
+ result = temp; result c_op i; \
+ } else { \
+ unsigned long flags; \
+ \
+ raw_local_irq_save(flags); \
+ result = v->counter; \
+ result c_op i; \
+ v->counter = result; \
+ raw_local_irq_restore(flags); \
+ } \
+ \
+ smp_llsc_mb(); \
+ \
+ return result; \
}
-#define ATOMIC64_OPS(op, c_op, asm_op) \
- ATOMIC64_OP(op, c_op, asm_op) \
+#define ATOMIC64_OPS(op, c_op, asm_op) \
+ ATOMIC64_OP(op, c_op, asm_op) \
ATOMIC64_OP_RETURN(op, c_op, asm_op)
ATOMIC64_OPS(add, +=, daddu)
@@ -415,7 +422,8 @@ ATOMIC64_OPS(sub, -=, dsubu)
#undef ATOMIC64_OP
/*
- * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic
+ * variable
* @i: integer value to subtract
* @v: pointer of type atomic64_t
*
@@ -443,8 +451,9 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
" .set reorder \n"
"1: \n"
" .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "=m" (v->counter)
- : "Ir" (i), "m" (v->counter)
+ : "=&r" (result), "=&r" (temp),
+ "=" GCC_OFF12_ASM() (v->counter)
+ : "Ir" (i), GCC_OFF12_ASM() (v->counter)
: "memory");
} else if (kernel_uses_llsc) {
long temp;
@@ -461,7 +470,8 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
" .set reorder \n"
"1: \n"
" .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "+m" (v->counter)
+ : "=&r" (result), "=&r" (temp),
+ "+" GCC_OFF12_ASM() (v->counter)
: "Ir" (i));
} else {
unsigned long flags;
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index bae6b0fa8ab5..6663bcca9d0c 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -17,6 +17,7 @@
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/byteorder.h> /* sigh ... */
+#include <asm/compiler.h>
#include <asm/cpu-features.h>
#include <asm/sgidefs.h>
#include <asm/war.h>
@@ -78,8 +79,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
" " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
- : "=&r" (temp), "=m" (*m)
- : "ir" (1UL << bit), "m" (*m));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*m)
+ : "ir" (1UL << bit), GCC_OFF12_ASM() (*m));
#ifdef CONFIG_CPU_MIPSR2
} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
do {
@@ -87,7 +88,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
" " __LL "%0, %1 # set_bit \n"
" " __INS "%0, %3, %2, 1 \n"
" " __SC "%0, %1 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (bit), "r" (~0));
} while (unlikely(!temp));
#endif /* CONFIG_CPU_MIPSR2 */
@@ -99,7 +100,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
" or %0, %2 \n"
" " __SC "%0, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
} else
@@ -130,7 +131,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
" " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (~(1UL << bit)));
#ifdef CONFIG_CPU_MIPSR2
} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
@@ -139,7 +140,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
" " __LL "%0, %1 # clear_bit \n"
" " __INS "%0, $0, %2, 1 \n"
" " __SC "%0, %1 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (bit));
} while (unlikely(!temp));
#endif /* CONFIG_CPU_MIPSR2 */
@@ -151,7 +152,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
" and %0, %2 \n"
" " __SC "%0, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (~(1UL << bit)));
} while (unlikely(!temp));
} else
@@ -196,7 +197,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
" " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (1UL << bit));
} else if (kernel_uses_llsc) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -209,7 +210,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
" xor %0, %2 \n"
" " __SC "%0, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
} else
@@ -244,7 +245,7 @@ static inline int test_and_set_bit(unsigned long nr,
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} else if (kernel_uses_llsc) {
@@ -258,7 +259,7 @@ static inline int test_and_set_bit(unsigned long nr,
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} while (unlikely(!res));
@@ -312,7 +313,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} while (unlikely(!res));
@@ -354,7 +355,7 @@ static inline int test_and_clear_bit(unsigned long nr,
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
#ifdef CONFIG_CPU_MIPSR2
@@ -368,7 +369,7 @@ static inline int test_and_clear_bit(unsigned long nr,
" " __EXT "%2, %0, %3, 1 \n"
" " __INS "%0, $0, %3, 1 \n"
" " __SC "%0, %1 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "ir" (bit)
: "memory");
} while (unlikely(!temp));
@@ -385,7 +386,7 @@ static inline int test_and_clear_bit(unsigned long nr,
" xor %2, %3 \n"
" " __SC "%2, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} while (unlikely(!res));
@@ -427,7 +428,7 @@ static inline int test_and_change_bit(unsigned long nr,
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} else if (kernel_uses_llsc) {
@@ -441,7 +442,7 @@ static inline int test_and_change_bit(unsigned long nr,
" xor %2, %0, %3 \n"
" " __SC "\t%2, %1 \n"
" .set mips0 \n"
- : "=&r" (temp), "+m" (*m), "=&r" (res)
+ : "=&r" (temp), "+" GCC_OFF12_ASM() (*m), "=&r" (res)
: "r" (1UL << bit)
: "memory");
} while (unlikely(!res));
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index cbaccebf5065..30939b02e3ff 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -84,6 +84,7 @@ extern char bmips_smp_int_vec_end;
extern int bmips_smp_enabled;
extern int bmips_cpu_offset;
extern cpumask_t bmips_booted_mask;
+extern unsigned long bmips_tp1_irqs;
extern void bmips_ebase_setup(void);
extern asmlinkage void plat_wired_tlb_setup(void);
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 1f7ca8b00404..b603804caac5 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -70,10 +70,7 @@ enum loongson_machine_type {
MACH_DEXXON_GDIUM2F10,
MACH_LEMOTE_NAS,
MACH_LEMOTE_LL2F,
- MACH_LEMOTE_A1004,
- MACH_LEMOTE_A1101,
- MACH_LEMOTE_A1201,
- MACH_LEMOTE_A1205,
+ MACH_LOONGSON_GENERIC,
MACH_LOONGSON_END
};
@@ -101,16 +98,16 @@ extern unsigned long mips_machtype;
struct boot_mem_map {
int nr_map;
struct boot_mem_map_entry {
- phys_t addr; /* start of memory segment */
- phys_t size; /* size of memory segment */
+ phys_addr_t addr; /* start of memory segment */
+ phys_addr_t size; /* size of memory segment */
long type; /* type of memory segment */
} map[BOOT_MEM_MAP_MAX];
};
extern struct boot_mem_map boot_mem_map;
-extern void add_memory_region(phys_t start, phys_t size, long type);
-extern void detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max);
+extern void add_memory_region(phys_addr_t start, phys_addr_t size, long type);
+extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max);
extern void prom_init(void);
extern void prom_free_prom_memory(void);
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
index 778e32d817bc..4809c29a4890 100644
--- a/arch/mips/include/asm/clock.h
+++ b/arch/mips/include/asm/clock.h
@@ -35,9 +35,6 @@ struct clk {
#define CLK_ALWAYS_ENABLED (1 << 0)
#define CLK_RATE_PROPAGATES (1 << 1)
-/* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
-
int clk_init(void);
int __clk_enable(struct clk *);
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index eefcaa363a87..28b1edf19501 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -10,6 +10,7 @@
#include <linux/bug.h>
#include <linux/irqflags.h>
+#include <asm/compiler.h>
#include <asm/war.h>
static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
@@ -30,8 +31,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
" sc %2, %1 \n"
" beqzl %2, 1b \n"
" .set mips0 \n"
- : "=&r" (retval), "=m" (*m), "=&r" (dummy)
- : "R" (*m), "Jr" (val)
+ : "=&r" (retval), "=" GCC_OFF12_ASM() (*m), "=&r" (dummy)
+ : GCC_OFF12_ASM() (*m), "Jr" (val)
: "memory");
} else if (kernel_uses_llsc) {
unsigned long dummy;
@@ -45,8 +46,9 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
" .set arch=r4000 \n"
" sc %2, %1 \n"
" .set mips0 \n"
- : "=&r" (retval), "=m" (*m), "=&r" (dummy)
- : "R" (*m), "Jr" (val)
+ : "=&r" (retval), "=" GCC_OFF12_ASM() (*m),
+ "=&r" (dummy)
+ : GCC_OFF12_ASM() (*m), "Jr" (val)
: "memory");
} while (unlikely(!dummy));
} else {
@@ -80,8 +82,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
" scd %2, %1 \n"
" beqzl %2, 1b \n"
" .set mips0 \n"
- : "=&r" (retval), "=m" (*m), "=&r" (dummy)
- : "R" (*m), "Jr" (val)
+ : "=&r" (retval), "=" GCC_OFF12_ASM() (*m), "=&r" (dummy)
+ : GCC_OFF12_ASM() (*m), "Jr" (val)
: "memory");
} else if (kernel_uses_llsc) {
unsigned long dummy;
@@ -93,8 +95,9 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
" move %2, %z4 \n"
" scd %2, %1 \n"
" .set mips0 \n"
- : "=&r" (retval), "=m" (*m), "=&r" (dummy)
- : "R" (*m), "Jr" (val)
+ : "=&r" (retval), "=" GCC_OFF12_ASM() (*m),
+ "=&r" (dummy)
+ : GCC_OFF12_ASM() (*m), "Jr" (val)
: "memory");
} while (unlikely(!dummy));
} else {
@@ -155,8 +158,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
" beqzl $1, 1b \n" \
"2: \n" \
" .set pop \n" \
- : "=&r" (__ret), "=R" (*m) \
- : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "=&r" (__ret), "=" GCC_OFF12_ASM() (*m) \
+ : GCC_OFF12_ASM() (*m), "Jr" (old), "Jr" (new) \
: "memory"); \
} else if (kernel_uses_llsc) { \
__asm__ __volatile__( \
@@ -172,8 +175,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
" beqz $1, 1b \n" \
" .set pop \n" \
"2: \n" \
- : "=&r" (__ret), "=R" (*m) \
- : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "=&r" (__ret), "=" GCC_OFF12_ASM() (*m) \
+ : GCC_OFF12_ASM() (*m), "Jr" (old), "Jr" (new) \
: "memory"); \
} else { \
unsigned long __flags; \
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
index 71f5c5cfc58a..c73815e0123a 100644
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
@@ -16,4 +16,12 @@
#define GCC_REG_ACCUM "accum"
#endif
+#ifndef CONFIG_CPU_MICROMIPS
+#define GCC_OFF12_ASM() "R"
+#elif __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 9)
+#define GCC_OFF12_ASM() "ZC"
+#else
+#error "microMIPS compilation unsupported with GCC older than 4.9"
+#endif
+
#endif /* _ASM_COMPILER_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 3325f3eb248c..2897cfafcaf0 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -344,4 +344,8 @@
# define cpu_has_msa 0
#endif
+#ifndef cpu_has_fre
+# define cpu_has_fre (cpu_data[0].options & MIPS_CPU_FRE)
+#endif
+
#endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index dfdc77ed1839..33866fce4d63 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -142,6 +142,7 @@
#define PRID_IMP_BMIPS3300_BUG 0x0000
#define PRID_IMP_BMIPS43XX 0xa000
#define PRID_IMP_BMIPS5000 0x5a00
+#define PRID_IMP_BMIPS5200 0x5b00
#define PRID_REV_BMIPS4380_LO 0x0040
#define PRID_REV_BMIPS4380_HI 0x006f
@@ -368,6 +369,7 @@ enum cpu_type_enum {
#define MIPS_CPU_HTW 0x100000000ull /* CPU support Hardware Page Table Walker */
#define MIPS_CPU_RIXIEX 0x200000000ull /* CPU has unique exception codes for {Read, Execute}-Inhibit exceptions */
#define MIPS_CPU_MAAR 0x400000000ull /* MAAR(I) registers are present */
+#define MIPS_CPU_FRE 0x800000000ull /* FRE & UFE bits implemented */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h
index 4da0c1fe30d9..ae6fedcb0060 100644
--- a/arch/mips/include/asm/edac.h
+++ b/arch/mips/include/asm/edac.h
@@ -1,6 +1,8 @@
#ifndef ASM_EDAC_H
#define ASM_EDAC_H
+#include <asm/compiler.h>
+
/* ECC atomic, DMA, SMP and interrupt safe scrub function */
static inline void atomic_scrub(void *va, u32 size)
@@ -24,8 +26,8 @@ static inline void atomic_scrub(void *va, u32 size)
" sc %0, %1 \n"
" beqz %0, 1b \n"
" .set mips0 \n"
- : "=&r" (temp), "=m" (*virt_addr)
- : "m" (*virt_addr));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*virt_addr)
+ : GCC_OFF12_ASM() (*virt_addr));
virt_addr++;
}
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 1d38fe0edd2d..eb4d95de619c 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -8,6 +8,8 @@
#ifndef _ASM_ELF_H
#define _ASM_ELF_H
+#include <linux/fs.h>
+#include <uapi/linux/elf.h>
/* ELF header e_flags defines. */
/* MIPS architecture level. */
@@ -28,6 +30,7 @@
#define PT_MIPS_REGINFO 0x70000000
#define PT_MIPS_RTPROC 0x70000001
#define PT_MIPS_OPTIONS 0x70000002
+#define PT_MIPS_ABIFLAGS 0x70000003
/* Flags in the e_flags field of the header */
#define EF_MIPS_NOREORDER 0x00000001
@@ -174,6 +177,30 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef double elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+struct mips_elf_abiflags_v0 {
+ uint16_t version; /* Version of flags structure */
+ uint8_t isa_level; /* The level of the ISA: 1-5, 32, 64 */
+ uint8_t isa_rev; /* The revision of ISA: 0 for MIPS V and below,
+ 1-n otherwise */
+ uint8_t gpr_size; /* The size of general purpose registers */
+ uint8_t cpr1_size; /* The size of co-processor 1 registers */
+ uint8_t cpr2_size; /* The size of co-processor 2 registers */
+ uint8_t fp_abi; /* The floating-point ABI */
+ uint32_t isa_ext; /* Mask of processor-specific extensions */
+ uint32_t ases; /* Mask of ASEs used */
+ uint32_t flags1; /* Mask of general flags */
+ uint32_t flags2;
+};
+
+#define MIPS_ABI_FP_ANY 0 /* FP ABI doesn't matter */
+#define MIPS_ABI_FP_DOUBLE 1 /* -mdouble-float */
+#define MIPS_ABI_FP_SINGLE 2 /* -msingle-float */
+#define MIPS_ABI_FP_SOFT 3 /* -msoft-float */
+#define MIPS_ABI_FP_OLD_64 4 /* -mips32r2 -mfp64 */
+#define MIPS_ABI_FP_XX 5 /* -mfpxx */
+#define MIPS_ABI_FP_64 6 /* -mips32r2 -mfp64 */
+#define MIPS_ABI_FP_64A 7 /* -mips32r2 -mfp64 -mno-odd-spreg */
+
#ifdef CONFIG_32BIT
/*
@@ -262,16 +289,13 @@ extern struct mips_abi mips_abi_n32;
#ifdef CONFIG_32BIT
-#define SET_PERSONALITY(ex) \
+#define SET_PERSONALITY2(ex, state) \
do { \
- if ((ex).e_flags & EF_MIPS_FP64) \
- clear_thread_flag(TIF_32BIT_FPREGS); \
- else \
- set_thread_flag(TIF_32BIT_FPREGS); \
- \
if (personality(current->personality) != PER_LINUX) \
set_personality(PER_LINUX); \
\
+ mips_set_personality_fp(state); \
+ \
current->thread.abi = &mips_abi; \
} while (0)
@@ -291,44 +315,44 @@ do { \
#endif
#ifdef CONFIG_MIPS32_O32
-#define __SET_PERSONALITY32_O32(ex) \
+#define __SET_PERSONALITY32_O32(ex, state) \
do { \
set_thread_flag(TIF_32BIT_REGS); \
set_thread_flag(TIF_32BIT_ADDR); \
\
- if (!((ex).e_flags & EF_MIPS_FP64)) \
- set_thread_flag(TIF_32BIT_FPREGS); \
+ mips_set_personality_fp(state); \
\
current->thread.abi = &mips_abi_32; \
} while (0)
#else
-#define __SET_PERSONALITY32_O32(ex) \
+#define __SET_PERSONALITY32_O32(ex, state) \
do { } while (0)
#endif
#ifdef CONFIG_MIPS32_COMPAT
-#define __SET_PERSONALITY32(ex) \
+#define __SET_PERSONALITY32(ex, state) \
do { \
if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
((ex).e_flags & EF_MIPS_ABI) == 0) \
__SET_PERSONALITY32_N32(); \
else \
- __SET_PERSONALITY32_O32(ex); \
+ __SET_PERSONALITY32_O32(ex, state); \
} while (0)
#else
-#define __SET_PERSONALITY32(ex) do { } while (0)
+#define __SET_PERSONALITY32(ex, state) do { } while (0)
#endif
-#define SET_PERSONALITY(ex) \
+#define SET_PERSONALITY2(ex, state) \
do { \
unsigned int p; \
\
clear_thread_flag(TIF_32BIT_REGS); \
clear_thread_flag(TIF_32BIT_FPREGS); \
+ clear_thread_flag(TIF_HYBRID_FPREGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- __SET_PERSONALITY32(ex); \
+ __SET_PERSONALITY32(ex, state); \
else \
current->thread.abi = &mips_abi; \
\
@@ -390,4 +414,24 @@ struct mm_struct;
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
+struct arch_elf_state {
+ int fp_abi;
+ int interp_fp_abi;
+ int overall_abi;
+};
+
+#define INIT_ARCH_ELF_STATE { \
+ .fp_abi = -1, \
+ .interp_fp_abi = -1, \
+ .overall_abi = -1, \
+}
+
+extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
+ bool is_interp, struct arch_elf_state *state);
+
+extern int arch_check_elf(void *ehdr, bool has_interpreter,
+ struct arch_elf_state *state);
+
+extern void mips_set_personality_fp(struct arch_elf_state *state);
+
#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index dd562414cd5e..994d21939676 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -36,14 +36,16 @@ extern void _restore_fp(struct task_struct *);
/*
* This enum specifies a mode in which we want the FPU to operate, for cores
- * which implement the Status.FR bit. Note that FPU_32BIT & FPU_64BIT
- * purposefully have the values 0 & 1 respectively, so that an integer value
- * of Status.FR can be trivially casted to the corresponding enum fpu_mode.
+ * which implement the Status.FR bit. Note that the bottom bit of the value
+ * purposefully matches the desired value of the Status.FR bit.
*/
enum fpu_mode {
FPU_32BIT = 0, /* FR = 0 */
- FPU_64BIT, /* FR = 1 */
+ FPU_64BIT, /* FR = 1, FRE = 0 */
FPU_AS_IS,
+ FPU_HYBRID, /* FR = 1, FRE = 1 */
+
+#define FPU_FR_MASK 0x1
};
static inline int __enable_fpu(enum fpu_mode mode)
@@ -57,6 +59,14 @@ static inline int __enable_fpu(enum fpu_mode mode)
enable_fpu_hazard();
return 0;
+ case FPU_HYBRID:
+ if (!cpu_has_fre)
+ return SIGFPE;
+
+ /* set FRE */
+ write_c0_config5(read_c0_config5() | MIPS_CONF5_FRE);
+ goto fr_common;
+
case FPU_64BIT:
#if !(defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_64BIT))
/* we only have a 32-bit FPU */
@@ -64,8 +74,11 @@ static inline int __enable_fpu(enum fpu_mode mode)
#endif
/* fall through */
case FPU_32BIT:
+ /* clear FRE */
+ write_c0_config5(read_c0_config5() & ~MIPS_CONF5_FRE);
+fr_common:
/* set CU1 & change FR appropriately */
- fr = (int)mode;
+ fr = (int)mode & FPU_FR_MASK;
change_c0_status(ST0_CU1 | ST0_FR, ST0_CU1 | (fr ? ST0_FR : 0));
enable_fpu_hazard();
@@ -102,13 +115,17 @@ static inline int __own_fpu(void)
enum fpu_mode mode;
int ret;
- mode = !test_thread_flag(TIF_32BIT_FPREGS);
+ if (test_thread_flag(TIF_HYBRID_FPREGS))
+ mode = FPU_HYBRID;
+ else
+ mode = !test_thread_flag(TIF_32BIT_FPREGS);
+
ret = __enable_fpu(mode);
if (ret)
return ret;
KSTK_STATUS(current) |= ST0_CU1;
- if (mode == FPU_64BIT)
+ if (mode == FPU_64BIT || mode == FPU_HYBRID)
KSTK_STATUS(current) |= ST0_FR;
else /* mode == FPU_32BIT */
KSTK_STATUS(current) &= ~ST0_FR;
@@ -166,8 +183,24 @@ static inline int init_fpu(void)
if (cpu_has_fpu) {
ret = __own_fpu();
- if (!ret)
+ if (!ret) {
+ unsigned int config5 = read_c0_config5();
+
+ /*
+ * Ensure FRE is clear whilst running _init_fpu, since
+ * single precision FP instructions are used. If FRE
+ * was set then we'll just end up initialising all 32
+ * 64b registers.
+ */
+ write_c0_config5(config5 & ~MIPS_CONF5_FRE);
+ enable_fpu_hazard();
+
_init_fpu();
+
+ /* Restore FRE */
+ write_c0_config5(config5);
+ enable_fpu_hazard();
+ }
} else
fpu_emulator_init_fpu();
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index 194cda0396a3..ef9987a61d88 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -14,6 +14,7 @@
#include <linux/uaccess.h>
#include <asm/asm-eva.h>
#include <asm/barrier.h>
+#include <asm/compiler.h>
#include <asm/errno.h>
#include <asm/war.h>
@@ -32,6 +33,7 @@
" beqzl $1, 1b \n" \
__WEAK_LLSC_MB \
"3: \n" \
+ " .insn \n" \
" .set pop \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
@@ -42,8 +44,10 @@
" "__UA_ADDR "\t1b, 4b \n" \
" "__UA_ADDR "\t2b, 4b \n" \
" .previous \n" \
- : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \
- : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \
+ : "=r" (ret), "=&r" (oldval), \
+ "=" GCC_OFF12_ASM() (*uaddr) \
+ : "0" (0), GCC_OFF12_ASM() (*uaddr), "Jr" (oparg), \
+ "i" (-EFAULT) \
: "memory"); \
} else if (cpu_has_llsc) { \
__asm__ __volatile__( \
@@ -58,6 +62,7 @@
" beqz $1, 1b \n" \
__WEAK_LLSC_MB \
"3: \n" \
+ " .insn \n" \
" .set pop \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
@@ -68,8 +73,10 @@
" "__UA_ADDR "\t1b, 4b \n" \
" "__UA_ADDR "\t2b, 4b \n" \
" .previous \n" \
- : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \
- : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \
+ : "=r" (ret), "=&r" (oldval), \
+ "=" GCC_OFF12_ASM() (*uaddr) \
+ : "0" (0), GCC_OFF12_ASM() (*uaddr), "Jr" (oparg), \
+ "i" (-EFAULT) \
: "memory"); \
} else \
ret = -ENOSYS; \
@@ -157,6 +164,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" beqzl $1, 1b \n"
__WEAK_LLSC_MB
"3: \n"
+ " .insn \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
"4: li %0, %6 \n"
@@ -166,8 +174,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" "__UA_ADDR "\t1b, 4b \n"
" "__UA_ADDR "\t2b, 4b \n"
" .previous \n"
- : "+r" (ret), "=&r" (val), "=R" (*uaddr)
- : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "+r" (ret), "=&r" (val), "=" GCC_OFF12_ASM() (*uaddr)
+ : GCC_OFF12_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
+ "i" (-EFAULT)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
@@ -184,6 +193,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" beqz $1, 1b \n"
__WEAK_LLSC_MB
"3: \n"
+ " .insn \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
"4: li %0, %6 \n"
@@ -193,8 +203,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" "__UA_ADDR "\t1b, 4b \n"
" "__UA_ADDR "\t2b, 4b \n"
" .previous \n"
- : "+r" (ret), "=&r" (val), "=R" (*uaddr)
- : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "+r" (ret), "=&r" (val), "=" GCC_OFF12_ASM() (*uaddr)
+ : GCC_OFF12_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
+ "i" (-EFAULT)
: "memory");
} else
return -ENOSYS;
diff --git a/arch/mips/include/asm/hpet.h b/arch/mips/include/asm/hpet.h
new file mode 100644
index 000000000000..18a8f778bfaa
--- /dev/null
+++ b/arch/mips/include/asm/hpet.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_HPET_H
+#define _ASM_HPET_H
+
+#ifdef CONFIG_RS780_HPET
+
+#define HPET_MMAP_SIZE 1024
+
+#define HPET_ID 0x000
+#define HPET_PERIOD 0x004
+#define HPET_CFG 0x010
+#define HPET_STATUS 0x020
+#define HPET_COUNTER 0x0f0
+
+#define HPET_Tn_CFG(n) (0x100 + 0x20 * n)
+#define HPET_Tn_CMP(n) (0x108 + 0x20 * n)
+#define HPET_Tn_ROUTE(n) (0x110 + 0x20 * n)
+
+#define HPET_T0_IRS 0x001
+#define HPET_T1_IRS 0x002
+#define HPET_T3_IRS 0x004
+
+#define HPET_T0_CFG 0x100
+#define HPET_T0_CMP 0x108
+#define HPET_T0_ROUTE 0x110
+#define HPET_T1_CFG 0x120
+#define HPET_T1_CMP 0x128
+#define HPET_T1_ROUTE 0x130
+#define HPET_T2_CFG 0x140
+#define HPET_T2_CMP 0x148
+#define HPET_T2_ROUTE 0x150
+
+#define HPET_ID_REV 0x000000ff
+#define HPET_ID_NUMBER 0x00001f00
+#define HPET_ID_64BIT 0x00002000
+#define HPET_ID_LEGSUP 0x00008000
+#define HPET_ID_VENDOR 0xffff0000
+#define HPET_ID_NUMBER_SHIFT 8
+#define HPET_ID_VENDOR_SHIFT 16
+
+#define HPET_CFG_ENABLE 0x001
+#define HPET_CFG_LEGACY 0x002
+#define HPET_LEGACY_8254 2
+#define HPET_LEGACY_RTC 8
+
+#define HPET_TN_LEVEL 0x0002
+#define HPET_TN_ENABLE 0x0004
+#define HPET_TN_PERIODIC 0x0008
+#define HPET_TN_PERIODIC_CAP 0x0010
+#define HPET_TN_64BIT_CAP 0x0020
+#define HPET_TN_SETVAL 0x0040
+#define HPET_TN_32BIT 0x0100
+#define HPET_TN_ROUTE 0x3e00
+#define HPET_TN_FSB 0x4000
+#define HPET_TN_FSB_CAP 0x8000
+#define HPET_TN_ROUTE_SHIFT 9
+
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD 100000000UL
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD 100000UL
+
+#define HPET_ADDR 0x20000
+#define HPET_MMIO_ADDR 0x90000e0000020000
+#define HPET_FREQ 14318780
+#define HPET_COMPARE_VAL ((HPET_FREQ + HZ / 2) / HZ)
+#define HPET_T0_IRQ 0
+
+extern void __init setup_hpet_timer(void);
+#endif /* CONFIG_RS780_HPET */
+#endif /* _ASM_HPET_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 933b50e125a0..9e777cd42b67 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -167,7 +167,7 @@ static inline void * isa_bus_to_virt(unsigned long address)
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags);
extern void __iounmap(const volatile void __iomem *addr);
#ifndef CONFIG_PCI
@@ -175,7 +175,7 @@ struct pci_dev;
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
#endif
-static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
+static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
void __iomem *addr = plat_ioremap(offset, size, flags);
@@ -183,7 +183,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
if (addr)
return addr;
-#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+#define __IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
if (cpu_has_64bit_addresses) {
u64 base = UNCAC_BASE;
@@ -197,7 +197,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
return (void __iomem *) (unsigned long) (base + offset);
} else if (__builtin_constant_p(offset) &&
__builtin_constant_p(size) && __builtin_constant_p(flags)) {
- phys_t phys_addr, last_addr;
+ phys_addr_t phys_addr, last_addr;
phys_addr = fixup_bigphys_addr(offset, size);
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 39f07aec640c..5a4e1bb8fb1b 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -48,4 +48,7 @@ extern int cp0_compare_irq;
extern int cp0_compare_irq_shift;
extern int cp0_perfcount_irq;
+void arch_trigger_all_cpu_backtrace(bool);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+
#endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
index 3f11fdb3ed8c..39a160bb41dc 100644
--- a/arch/mips/include/asm/irq_cpu.h
+++ b/arch/mips/include/asm/irq_cpu.h
@@ -19,8 +19,8 @@ extern void rm9k_cpu_irq_init(void);
#ifdef CONFIG_IRQ_DOMAIN
struct device_node;
-extern int mips_cpu_intc_init(struct device_node *of_node,
- struct device_node *parent);
+extern int mips_cpu_irq_of_init(struct device_node *of_node,
+ struct device_node *parent);
#endif
#endif /* _ASM_IRQ_CPU_H */
diff --git a/arch/mips/include/asm/mach-ath25/ath25_platform.h b/arch/mips/include/asm/mach-ath25/ath25_platform.h
new file mode 100644
index 000000000000..4f4ee4f9e5ec
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_MACH_ATH25_PLATFORM_H
+#define __ASM_MACH_ATH25_PLATFORM_H
+
+#include <linux/etherdevice.h>
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ath25_boarddata {
+ u32 magic; /* board data is valid */
+#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char board_name[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 flags; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 reset_config_gpio; /* Reset factory GPIO pin */
+ u16 sys_led_gpio; /* System LED GPIO pin */
+
+ u32 cpu_freq; /* CPU core frequency in Hz */
+ u32 sys_freq; /* System frequency in Hz */
+ u32 cnt_freq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0_mac[ETH_ALEN];
+ u8 enet0_mac[ETH_ALEN];
+ u8 enet1_mac[ETH_ALEN];
+
+ u16 pci_id; /* Pseudo PCIID for common code */
+ u16 mem_cap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ 0x1000
+
+/*
+ * Platform device information for the Wireless MAC
+ */
+struct ar231x_board_config {
+ u16 devid;
+
+ /* board config data */
+ struct ath25_boarddata *config;
+
+ /* radio calibration data */
+ const char *radio;
+};
+
+#endif /* __ASM_MACH_ATH25_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
new file mode 100644
index 000000000000..ade0356df257
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
@@ -0,0 +1,64 @@
+/*
+ * Atheros AR231x/AR531x SoC specific CPU feature overrides
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_ejtag 1
+
+#if !defined(CONFIG_SOC_AR5312)
+# define cpu_has_llsc 1
+#else
+/*
+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
+ * ll/sc instructions.
+ */
+# define cpu_has_llsc 0
+#endif
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+
+#if !defined(CONFIG_SOC_AR5312)
+# define cpu_has_mips32r2 1
+#endif
+
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ath25/dma-coherence.h b/arch/mips/include/asm/mach-ath25/dma-coherence.h
new file mode 100644
index 000000000000..d8009c93a465
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H
+#define __ASM_MACH_ATH25_DMA_COHERENCE_H
+
+#include <linux/device.h>
+
+/*
+ * We need some arbitrary non-zero value to be programmed to the BAR1 register
+ * of PCI host controller to enable DMA. The same value should be used as the
+ * offset to calculate the physical address of DMA buffer for PCI devices.
+ */
+#define AR2315_PCI_HOST_SDRAM_BASEADDR 0x20000000
+
+static inline dma_addr_t ath25_dev_offset(struct device *dev)
+{
+#ifdef CONFIG_PCI
+ extern struct bus_type pci_bus_type;
+
+ if (dev && dev->bus == &pci_bus_type)
+ return AR2315_PCI_HOST_SDRAM_BASEADDR;
+#endif
+ return 0;
+}
+
+static inline dma_addr_t
+plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+ return virt_to_phys(addr) + ath25_dev_offset(dev);
+}
+
+static inline dma_addr_t
+plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ return page_to_phys(page) + ath25_dev_offset(dev);
+}
+
+static inline unsigned long
+plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+ return dma_addr - ath25_dev_offset(dev);
+}
+
+static inline void
+plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+ dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_COHERENT
+ return 1;
+#endif
+#ifdef CONFIG_DMA_NONCOHERENT
+ return 0;
+#endif
+}
+
+#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ath25/gpio.h b/arch/mips/include/asm/mach-ath25/gpio.h
new file mode 100644
index 000000000000..713564b8e8ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/gpio.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_MACH_ATH25_GPIO_H
+#define __ASM_MACH_ATH25_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+#endif /* __ASM_MACH_ATH25_GPIO_H */
diff --git a/arch/mips/include/asm/mach-ath25/war.h b/arch/mips/include/asm/mach-ath25/war.h
new file mode 100644
index 000000000000..e3a5250ebd67
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MACH_ATH25_WAR_H
+#define __ASM_MACH_ATH25_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MACH_ATH25_WAR_H */
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
index 75a94ad3ac91..99fea1fbb4f5 100644
--- a/arch/mips/include/asm/mach-au1x00/ioremap.h
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -11,10 +11,10 @@
#include <linux/types.h>
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
-extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t);
#else
-static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return phys_addr;
}
@@ -23,12 +23,12 @@ static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
/*
* Allow physical addresses to be fixed up to help 36-bit peripherals.
*/
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return __fixup_bigphys_addr(phys_addr, size);
}
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
return NULL;
diff --git a/arch/mips/include/asm/mach-bcm3384/dma-coherence.h b/arch/mips/include/asm/mach-bcm3384/dma-coherence.h
new file mode 100644
index 000000000000..a3be8e50e1f0
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm3384/dma-coherence.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_MACH_BCM3384_DMA_COHERENCE_H
+#define __ASM_MACH_BCM3384_DMA_COHERENCE_H
+
+struct device;
+
+extern dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size);
+extern dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page);
+extern unsigned long plat_dma_addr_to_phys(struct device *dev,
+ dma_addr_t dma_addr);
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s,
+ * so we can't guarantee allocations that must be
+ * within a tighter range than GFP_DMA..
+ */
+ if (mask < DMA_BIT_MASK(24))
+ return 0;
+
+ return 1;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_BCM3384_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-bcm3384/war.h b/arch/mips/include/asm/mach-bcm3384/war.h
new file mode 100644
index 000000000000..59d7599059b0
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm3384/war.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM3384_WAR_H
+#define __ASM_MIPS_MACH_BCM3384_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_BCM3384_WAR_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
index 36a3fc1aa3ae..ee59ffe99922 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -14,40 +14,8 @@
#include <linux/types.h>
#include <linux/kernel.h>
-struct nvram_header {
- u32 magic;
- u32 len;
- u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
- u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
- u32 config_ncdl; /* ncdl values for memc */
-};
-
-#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */
-#define NVRAM_VERSION 1
-#define NVRAM_HEADER_SIZE 20
-#define NVRAM_SPACE 0x8000
-
-#define FLASH_MIN 0x00020000 /* Minimum flash size */
-
-#define NVRAM_MAX_VALUE_LEN 255
-#define NVRAM_MAX_PARAM_LEN 64
-
-extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len);
-
-static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
-{
- if (strchr(buf, ':'))
- sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
- &macaddr[5]);
- else if (strchr(buf, '-'))
- sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
- &macaddr[5]);
- else
- printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
-}
-
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
int bcm47xx_nvram_gpio_pin(const char *name);
#endif /* __BCM47XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
index ff15e3b14e7a..aea6e64b828f 100644
--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
@@ -3,12 +3,12 @@
#include <bcm63xx_cpu.h>
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return phys_addr;
}
-static inline int is_bcm63xx_internal_registers(phys_t offset)
+static inline int is_bcm63xx_internal_registers(phys_addr_t offset)
{
switch (bcm63xx_get_cpu_id()) {
case BCM3368_CPU_ID:
@@ -32,7 +32,7 @@ static inline int is_bcm63xx_internal_registers(phys_t offset)
return 0;
}
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
if (is_bcm63xx_internal_registers(offset))
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
index b379938d47f0..513371f7c39c 100644
--- a/arch/mips/include/asm/mach-generic/ioremap.h
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -15,12 +15,12 @@
* Allow physical addresses to be fixed up to help peripherals located
* outside the low 32-bit range -- generic pass-through version.
*/
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return phys_addr;
}
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
return NULL;
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index 139cd200e79d..050e18bb1a04 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -36,4 +36,10 @@
#endif /* CONFIG_IRQ_CPU */
+#ifdef CONFIG_MIPS_GIC
+#ifndef MIPS_GIC_IRQ_BASE
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+#endif
+#endif /* CONFIG_MIPS_GIC */
+
#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
index f196cceb7322..4e5ae6523cb4 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -48,6 +48,8 @@ extern struct clk *clk_get_ppe(void);
extern unsigned char ltq_boot_select(void);
/* find out what caused the last cpu reset */
extern int ltq_reset_cause(void);
+/* find out the soc type */
+extern int ltq_soc_type(void);
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
diff --git a/arch/mips/include/asm/mach-loongson/boot_param.h b/arch/mips/include/asm/mach-loongson/boot_param.h
index 3388fc53599e..fa802926523f 100644
--- a/arch/mips/include/asm/mach-loongson/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson/boot_param.h
@@ -10,7 +10,8 @@
#define VIDEO_ROM 7
#define ADAPTER_ROM 8
#define ACPI_TABLE 9
-#define MAX_MEMORY_TYPE 10
+#define SMBIOS_TABLE 10
+#define MAX_MEMORY_TYPE 11
#define LOONGSON3_BOOT_MEM_MAP_MAX 128
struct efi_memory_map_loongson {
@@ -42,15 +43,49 @@ struct efi_cpuinfo_loongson {
u32 processor_id; /* PRID, e.g. 6305, 6306 */
u32 cputype; /* Loongson_3A/3B, etc. */
u32 total_node; /* num of total numa nodes */
- u32 cpu_startup_core_id; /* Core id */
+ u16 cpu_startup_core_id; /* Boot core id */
+ u16 reserved_cores_mask;
u32 cpu_clock_freq; /* cpu_clock */
u32 nr_cpus;
} __packed;
+#define MAX_UARTS 64
+struct uart_device {
+ u32 iotype; /* see include/linux/serial_core.h */
+ u32 uartclk;
+ u32 int_offset;
+ u64 uart_base;
+} __packed;
+
+#define MAX_SENSORS 64
+#define SENSOR_TEMPER 0x00000001
+#define SENSOR_VOLTAGE 0x00000002
+#define SENSOR_FAN 0x00000004
+struct sensor_device {
+ char name[32]; /* a formal name */
+ char label[64]; /* a flexible description */
+ u32 type; /* SENSOR_* */
+ u32 id; /* instance id of a sensor-class */
+ u32 fan_policy; /* see loongson_hwmon.h */
+ u32 fan_percent;/* only for constant speed policy */
+ u64 base_addr; /* base address of device registers */
+} __packed;
+
struct system_loongson {
u16 vers; /* version of system_loongson */
u32 ccnuma_smp; /* 0: no numa; 1: has numa */
u32 sing_double_channel; /* 1:single; 2:double */
+ u32 nr_uarts;
+ struct uart_device uarts[MAX_UARTS];
+ u32 nr_sensors;
+ struct sensor_device sensors[MAX_SENSORS];
+ char has_ec;
+ char ec_name[32];
+ u64 ec_base_addr;
+ char has_tcm;
+ char tcm_name[32];
+ u64 tcm_base_addr;
+ u64 workarounds; /* see workarounds.h */
} __packed;
struct irq_source_routing_table {
@@ -149,6 +184,8 @@ struct loongson_system_configuration {
u32 nr_nodes;
int cores_per_node;
int cores_per_package;
+ u16 boot_cpu_id;
+ u16 reserved_cpus_mask;
enum loongson_cpu_type cputype;
u64 ht_control_base;
u64 pci_mem_start_addr;
@@ -159,9 +196,15 @@ struct loongson_system_configuration {
u64 suspend_addr;
u64 vgabios_addr;
u32 dma_mask_bits;
+ char ecname[32];
+ u32 nr_uarts;
+ struct uart_device uarts[MAX_UARTS];
+ u32 nr_sensors;
+ struct sensor_device sensors[MAX_SENSORS];
+ u64 workarounds;
};
extern struct efi_memory_map_loongson *loongson_memmap;
extern struct loongson_system_configuration loongson_sysconf;
-extern int cpuhotplug_workaround;
+
#endif
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index 6a902751cc7f..a90534161bd2 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -23,7 +23,7 @@ static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
#ifdef CONFIG_CPU_LOONGSON3
- return virt_to_phys(addr);
+ return phys_to_dma(dev, virt_to_phys(addr));
#else
return virt_to_phys(addr) | 0x80000000;
#endif
@@ -33,7 +33,7 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
#ifdef CONFIG_CPU_LOONGSON3
- return page_to_phys(page);
+ return phys_to_dma(dev, page_to_phys(page));
#else
return page_to_phys(page) | 0x80000000;
#endif
@@ -43,7 +43,7 @@ static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
- return dma_addr;
+ return dma_to_phys(dev, dma_addr);
#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
#else
diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h
index 34560bda6626..a281cca5f2fb 100644
--- a/arch/mips/include/asm/mach-loongson/irq.h
+++ b/arch/mips/include/asm/mach-loongson/irq.h
@@ -32,8 +32,7 @@
#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
-#define LOONGSON_INT_CORE0_INT0 0x11 /* route to int 0 of core 0 */
-#define LOONGSON_INT_CORE0_INT1 0x21 /* route to int 1 of core 0 */
+#define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */
#endif
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 92bf76c21441..5459ac09679f 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -35,7 +35,7 @@ extern void __init prom_init_cmdline(void);
extern void __init prom_init_machtype(void);
extern void __init prom_init_env(void);
#ifdef CONFIG_LOONGSON_UART_BASE
-extern unsigned long _loongson_uart_base, loongson_uart_base;
+extern unsigned long _loongson_uart_base[], loongson_uart_base[];
extern void prom_init_loongson_uart_base(void);
#endif
diff --git a/arch/mips/include/asm/mach-loongson/loongson_hwmon.h b/arch/mips/include/asm/mach-loongson/loongson_hwmon.h
new file mode 100644
index 000000000000..4431fc54a36c
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/loongson_hwmon.h
@@ -0,0 +1,55 @@
+#ifndef __LOONGSON_HWMON_H_
+#define __LOONGSON_HWMON_H_
+
+#include <linux/types.h>
+
+#define MIN_TEMP 0
+#define MAX_TEMP 255
+#define NOT_VALID_TEMP 999
+
+typedef int (*get_temp_fun)(int);
+extern int loongson3_cpu_temp(int);
+
+/* 0:Max speed, 1:Manual, 2:Auto */
+enum fan_control_mode {
+ FAN_FULL_MODE = 0,
+ FAN_MANUAL_MODE = 1,
+ FAN_AUTO_MODE = 2,
+ FAN_MODE_END
+};
+
+struct temp_range {
+ u8 low;
+ u8 high;
+ u8 level;
+};
+
+#define CONSTANT_SPEED_POLICY 0 /* at constent speed */
+#define STEP_SPEED_POLICY 1 /* use up/down arrays to describe policy */
+#define KERNEL_HELPER_POLICY 2 /* kernel as a helper to fan control */
+
+#define MAX_STEP_NUM 16
+#define MAX_FAN_LEVEL 255
+
+/* loongson_fan_policy works when fan work at FAN_AUTO_MODE */
+struct loongson_fan_policy {
+ u8 type;
+
+ /* percent only used when type is CONSTANT_SPEED_POLICY */
+ u8 percent;
+
+ /* period between two check. (Unit: S) */
+ u8 adjust_period;
+
+ /* fan adjust usually depend on a temprature input */
+ get_temp_fun depend_temp;
+
+ /* up_step/down_step used when type is STEP_SPEED_POLICY */
+ u8 up_step_num;
+ u8 down_step_num;
+ struct temp_range up_step[MAX_STEP_NUM];
+ struct temp_range down_step[MAX_STEP_NUM];
+ struct delayed_work work;
+};
+
+#endif /* __LOONGSON_HWMON_H_*/
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index 228e37847a36..cb2b60249cd2 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -26,7 +26,7 @@
#ifdef CONFIG_LOONGSON_MACH3X
-#define LOONGSON_MACHTYPE MACH_LEMOTE_A1101
+#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC
#endif /* CONFIG_LOONGSON_MACH3X */
diff --git a/arch/mips/include/asm/mach-loongson/topology.h b/arch/mips/include/asm/mach-loongson/topology.h
index 5598ba77d2ef..0d8f3b55bdbc 100644
--- a/arch/mips/include/asm/mach-loongson/topology.h
+++ b/arch/mips/include/asm/mach-loongson/topology.h
@@ -3,7 +3,7 @@
#ifdef CONFIG_NUMA
-#define cpu_to_node(cpu) ((cpu) >> 2)
+#define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2)
#define parent_node(node) (node)
#define cpumask_of_node(node) (&__node_data[(node)]->cpumask)
diff --git a/arch/mips/include/asm/mach-loongson/workarounds.h b/arch/mips/include/asm/mach-loongson/workarounds.h
new file mode 100644
index 000000000000..e180c1422eae
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/workarounds.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_LOONGSON_WORKAROUNDS_H_
+#define __ASM_MACH_LOONGSON_WORKAROUNDS_H_
+
+#define WORKAROUND_CPUFREQ 0x00000001
+#define WORKAROUND_CPUHOTPLUG 0x00000002
+
+#endif
diff --git a/arch/mips/include/asm/mach-loongson1/cpufreq.h b/arch/mips/include/asm/mach-loongson1/cpufreq.h
new file mode 100644
index 000000000000..e7765ce30bcf
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/cpufreq.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 CPUFreq platform support.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_CPUFREQ_H
+#define __ASM_MACH_LOONGSON1_CPUFREQ_H
+
+struct plat_ls1x_cpufreq {
+ const char *clk_name; /* CPU clk */
+ const char *osc_clk_name; /* OSC clk */
+ unsigned int max_freq; /* in kHz */
+ unsigned int min_freq; /* in kHz */
+};
+
+#endif /* __ASM_MACH_LOONGSON1_CPUFREQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
index 5c437c2ba6b3..20e0c2b155dd 100644
--- a/arch/mips/include/asm/mach-loongson1/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -16,6 +16,7 @@
#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
/* Loongson 1 Register Bases */
+#define LS1X_MUX_BASE 0x1fd00420
#define LS1X_INTC_BASE 0x1fd01040
#define LS1X_EHCI_BASE 0x1fe00000
#define LS1X_OHCI_BASE 0x1fe08000
@@ -31,7 +32,10 @@
#define LS1X_I2C0_BASE 0x1fe58000
#define LS1X_I2C1_BASE 0x1fe68000
#define LS1X_I2C2_BASE 0x1fe70000
-#define LS1X_PWM_BASE 0x1fe5c000
+#define LS1X_PWM0_BASE 0x1fe5c000
+#define LS1X_PWM1_BASE 0x1fe5c010
+#define LS1X_PWM2_BASE 0x1fe5c020
+#define LS1X_PWM3_BASE 0x1fe5c030
#define LS1X_WDT_BASE 0x1fe5c060
#define LS1X_RTC_BASE 0x1fe64000
#define LS1X_AC97_BASE 0x1fe74000
@@ -39,6 +43,8 @@
#define LS1X_CLK_BASE 0x1fe78030
#include <regs-clk.h>
+#include <regs-mux.h>
+#include <regs-pwm.h>
#include <regs-wdt.h>
#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
index 30c13e508fff..47de55e0c835 100644
--- a/arch/mips/include/asm/mach-loongson1/platform.h
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -13,10 +13,12 @@
#include <linux/platform_device.h>
-extern struct platform_device ls1x_uart_device;
-extern struct platform_device ls1x_eth0_device;
-extern struct platform_device ls1x_ehci_device;
-extern struct platform_device ls1x_rtc_device;
+extern struct platform_device ls1x_uart_pdev;
+extern struct platform_device ls1x_cpufreq_pdev;
+extern struct platform_device ls1x_eth0_pdev;
+extern struct platform_device ls1x_eth1_pdev;
+extern struct platform_device ls1x_ehci_pdev;
+extern struct platform_device ls1x_rtc_pdev;
extern void __init ls1x_clk_init(void);
extern void __init ls1x_serial_setup(struct platform_device *pdev);
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
index fb6a3ff9318f..ee2445b10fc3 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -20,15 +20,32 @@
/* Clock PLL Divisor Register Bits */
#define DIV_DC_EN (0x1 << 31)
+#define DIV_DC_RST (0x1 << 30)
#define DIV_CPU_EN (0x1 << 25)
+#define DIV_CPU_RST (0x1 << 24)
#define DIV_DDR_EN (0x1 << 19)
+#define DIV_DDR_RST (0x1 << 18)
+#define RST_DC_EN (0x1 << 5)
+#define RST_DC (0x1 << 4)
+#define RST_DDR_EN (0x1 << 3)
+#define RST_DDR (0x1 << 2)
+#define RST_CPU_EN (0x1 << 1)
+#define RST_CPU 0x1
#define DIV_DC_SHIFT 26
#define DIV_CPU_SHIFT 20
#define DIV_DDR_SHIFT 14
-#define DIV_DC_WIDTH 5
-#define DIV_CPU_WIDTH 5
-#define DIV_DDR_WIDTH 5
+#define DIV_DC_WIDTH 4
+#define DIV_CPU_WIDTH 4
+#define DIV_DDR_WIDTH 4
+
+#define BYPASS_DC_SHIFT 12
+#define BYPASS_DDR_SHIFT 10
+#define BYPASS_CPU_SHIFT 8
+
+#define BYPASS_DC_WIDTH 1
+#define BYPASS_DDR_WIDTH 1
+#define BYPASS_CPU_WIDTH 1
#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-mux.h b/arch/mips/include/asm/mach-loongson1/regs-mux.h
new file mode 100644
index 000000000000..fb1e36efaa19
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-mux.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 MUX Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_MUX_H
+#define __ASM_MACH_LOONGSON1_REGS_MUX_H
+
+#define LS1X_MUX_REG(x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
+
+#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
+#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
+
+/* MUX CTRL0 Register Bits */
+#define UART0_USE_PWM23 (0x1 << 28)
+#define UART0_USE_PWM01 (0x1 << 27)
+#define UART1_USE_LCD0_5_6_11 (0x1 << 26)
+#define I2C2_USE_CAN1 (0x1 << 25)
+#define I2C1_USE_CAN0 (0x1 << 24)
+#define NAND3_USE_UART5 (0x1 << 23)
+#define NAND3_USE_UART4 (0x1 << 22)
+#define NAND3_USE_UART1_DAT (0x1 << 21)
+#define NAND3_USE_UART1_CTS (0x1 << 20)
+#define NAND3_USE_PWM23 (0x1 << 19)
+#define NAND3_USE_PWM01 (0x1 << 18)
+#define NAND2_USE_UART5 (0x1 << 17)
+#define NAND2_USE_UART4 (0x1 << 16)
+#define NAND2_USE_UART1_DAT (0x1 << 15)
+#define NAND2_USE_UART1_CTS (0x1 << 14)
+#define NAND2_USE_PWM23 (0x1 << 13)
+#define NAND2_USE_PWM01 (0x1 << 12)
+#define NAND1_USE_UART5 (0x1 << 11)
+#define NAND1_USE_UART4 (0x1 << 10)
+#define NAND1_USE_UART1_DAT (0x1 << 9)
+#define NAND1_USE_UART1_CTS (0x1 << 8)
+#define NAND1_USE_PWM23 (0x1 << 7)
+#define NAND1_USE_PWM01 (0x1 << 6)
+#define GMAC1_USE_UART1 (0x1 << 4)
+#define GMAC1_USE_UART0 (0x1 << 3)
+#define LCD_USE_UART0_DAT (0x1 << 2)
+#define LCD_USE_UART15 (0x1 << 1)
+#define LCD_USE_UART0 0x1
+
+/* MUX CTRL1 Register Bits */
+#define USB_RESET (0x1 << 31)
+#define SPI1_CS_USE_PWM01 (0x1 << 24)
+#define SPI1_USE_CAN (0x1 << 23)
+#define DISABLE_DDR_CONFSPACE (0x1 << 20)
+#define DDR32TO16EN (0x1 << 16)
+#define GMAC1_SHUT (0x1 << 13)
+#define GMAC0_SHUT (0x1 << 12)
+#define USB_SHUT (0x1 << 11)
+#define UART1_3_USE_CAN1 (0x1 << 5)
+#define UART1_2_USE_CAN0 (0x1 << 4)
+#define GMAC1_USE_TXCLK (0x1 << 3)
+#define GMAC0_USE_TXCLK (0x1 << 2)
+#define GMAC1_USE_PWM23 (0x1 << 1)
+#define GMAC0_USE_PWM01 0x1
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_MUX_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-pwm.h b/arch/mips/include/asm/mach-loongson1/regs-pwm.h
new file mode 100644
index 000000000000..99f2bcc586f0
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-pwm.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 PWM Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_PWM_H
+#define __ASM_MACH_LOONGSON1_REGS_PWM_H
+
+/* Loongson 1 PWM Timer Register Definitions */
+#define PWM_CNT 0x0
+#define PWM_HRC 0x4
+#define PWM_LRC 0x8
+#define PWM_CTRL 0xc
+
+/* PWM Control Register Bits */
+#define CNT_RST (0x1 << 7)
+#define INT_SR (0x1 << 6)
+#define INT_EN (0x1 << 5)
+#define PWM_SINGLE (0x1 << 4)
+#define PWM_OE (0x1 << 3)
+#define CNT_EN 0x1
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_PWM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
index 6574568c2084..c39ee982ad3b 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-wdt.h
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
*
- * Loongson 1 watchdog register definitions.
+ * Loongson 1 Watchdog Register Definitions.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -12,11 +12,8 @@
#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
#define __ASM_MACH_LOONGSON1_REGS_WDT_H
-#define LS1X_WDT_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_WDT_BASE + (x)))
-
-#define LS1X_WDT_EN LS1X_WDT_REG(0x0)
-#define LS1X_WDT_SET LS1X_WDT_REG(0x4)
-#define LS1X_WDT_TIMER LS1X_WDT_REG(0x8)
+#define WDT_EN 0x0
+#define WDT_TIMER 0x4
+#define WDT_SET 0x8
#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
index f2c13d211abb..47cfe64efbb0 100644
--- a/arch/mips/include/asm/mach-malta/irq.h
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -2,7 +2,6 @@
#define __ASM_MACH_MIPS_IRQ_H
-#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
#define NR_IRQS 256
#include_next <irq.h>
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
index fc946c835995..2e54b4bff5cf 100644
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
@@ -49,6 +49,7 @@
#include <linux/types.h>
+#include <asm/compiler.h>
#include <asm/war.h>
#ifndef R10000_LLSC_WAR
@@ -84,8 +85,8 @@ static inline void set_value_reg32(volatile u32 *const addr,
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
- : "=&r" (temp), "=m" (*addr)
- : "ir" (~mask), "ir" (value), "m" (*addr));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*addr)
+ : "ir" (~mask), "ir" (value), GCC_OFF12_ASM() (*addr));
}
/*
@@ -105,8 +106,8 @@ static inline void set_reg32(volatile u32 *const addr,
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
- : "=&r" (temp), "=m" (*addr)
- : "ir" (mask), "m" (*addr));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*addr)
+ : "ir" (mask), GCC_OFF12_ASM() (*addr));
}
/*
@@ -126,8 +127,8 @@ static inline void clear_reg32(volatile u32 *const addr,
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
- : "=&r" (temp), "=m" (*addr)
- : "ir" (~mask), "m" (*addr));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*addr)
+ : "ir" (~mask), GCC_OFF12_ASM() (*addr));
}
/*
@@ -147,8 +148,8 @@ static inline void toggle_reg32(volatile u32 *const addr,
" "__beqz"%0, 1b \n"
" nop \n"
" .set pop \n"
- : "=&r" (temp), "=m" (*addr)
- : "ir" (mask), "m" (*addr));
+ : "=&r" (temp), "=" GCC_OFF12_ASM() (*addr)
+ : "ir" (mask), GCC_OFF12_ASM() (*addr));
}
/*
@@ -219,8 +220,8 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr)
" .set arch=r4000 \n" \
"1: ll %0, %1 #custom_read_reg32 \n" \
" .set pop \n" \
- : "=r" (tmp), "=m" (*address) \
- : "m" (*address))
+ : "=r" (tmp), "=" GCC_OFF12_ASM() (*address) \
+ : GCC_OFF12_ASM() (*address))
#define custom_write_reg32(address, tmp) \
__asm__ __volatile__( \
@@ -230,7 +231,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr)
" "__beqz"%0, 1b \n" \
" nop \n" \
" .set pop \n" \
- : "=&r" (tmp), "=m" (*address) \
- : "0" (tmp), "m" (*address))
+ : "=&r" (tmp), "=" GCC_OFF12_ASM() (*address) \
+ : "0" (tmp), GCC_OFF12_ASM() (*address))
#endif /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
index 6f9b24f51157..1976fb815fd1 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -13,6 +13,13 @@
#ifndef _MT7620_REGS_H_
#define _MT7620_REGS_H_
+enum mt762x_soc_type {
+ MT762X_SOC_UNKNOWN = 0,
+ MT762X_SOC_MT7620A,
+ MT762X_SOC_MT7620N,
+ MT762X_SOC_MT7628AN,
+};
+
#define MT7620_SYSC_BASE 0x10000000
#define SYSC_REG_CHIP_NAME0 0x00
@@ -25,11 +32,9 @@
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
-#define MT7620N_CHIP_NAME0 0x33365452
-#define MT7620N_CHIP_NAME1 0x20203235
-
-#define MT7620A_CHIP_NAME0 0x3637544d
-#define MT7620A_CHIP_NAME1 0x20203032
+#define MT7620_CHIP_NAME0 0x3637544d
+#define MT7620_CHIP_NAME1 0x20203032
+#define MT7628_CHIP_NAME1 0x20203832
#define SYSCFG0_XTAL_FREQ_SEL BIT(6)
@@ -74,6 +79,9 @@
#define SYSCFG0_DRAM_TYPE_DDR1 1
#define SYSCFG0_DRAM_TYPE_DDR2 2
+#define SYSCFG0_DRAM_TYPE_DDR2_MT7628 0
+#define SYSCFG0_DRAM_TYPE_DDR1_MT7628 1
+
#define MT7620_DRAM_BASE 0x0
#define MT7620_SDRAM_SIZE_MIN 2
#define MT7620_SDRAM_SIZE_MAX 64
@@ -82,7 +90,6 @@
#define MT7620_DDR2_SIZE_MIN 32
#define MT7620_DDR2_SIZE_MAX 256
-#define MT7620_GPIO_MODE_I2C BIT(0)
#define MT7620_GPIO_MODE_UART0_SHIFT 2
#define MT7620_GPIO_MODE_UART0_MASK 0x7
#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
@@ -94,15 +101,40 @@
#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
#define MT7620_GPIO_MODE_GPIO_I2S 0x6
#define MT7620_GPIO_MODE_GPIO 0x7
-#define MT7620_GPIO_MODE_UART1 BIT(5)
-#define MT7620_GPIO_MODE_MDIO BIT(8)
-#define MT7620_GPIO_MODE_RGMII1 BIT(9)
-#define MT7620_GPIO_MODE_RGMII2 BIT(10)
-#define MT7620_GPIO_MODE_SPI BIT(11)
-#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
-#define MT7620_GPIO_MODE_WLED BIT(13)
-#define MT7620_GPIO_MODE_JTAG BIT(15)
-#define MT7620_GPIO_MODE_EPHY BIT(15)
-#define MT7620_GPIO_MODE_WDT BIT(22)
+
+#define MT7620_GPIO_MODE_NAND 0
+#define MT7620_GPIO_MODE_SD 1
+#define MT7620_GPIO_MODE_ND_SD_GPIO 2
+#define MT7620_GPIO_MODE_ND_SD_MASK 0x3
+#define MT7620_GPIO_MODE_ND_SD_SHIFT 18
+
+#define MT7620_GPIO_MODE_PCIE_RST 0
+#define MT7620_GPIO_MODE_PCIE_REF 1
+#define MT7620_GPIO_MODE_PCIE_GPIO 2
+#define MT7620_GPIO_MODE_PCIE_MASK 0x3
+#define MT7620_GPIO_MODE_PCIE_SHIFT 16
+
+#define MT7620_GPIO_MODE_WDT_RST 0
+#define MT7620_GPIO_MODE_WDT_REF 1
+#define MT7620_GPIO_MODE_WDT_GPIO 2
+#define MT7620_GPIO_MODE_WDT_MASK 0x3
+#define MT7620_GPIO_MODE_WDT_SHIFT 21
+
+#define MT7620_GPIO_MODE_I2C 0
+#define MT7620_GPIO_MODE_UART1 5
+#define MT7620_GPIO_MODE_MDIO 8
+#define MT7620_GPIO_MODE_RGMII1 9
+#define MT7620_GPIO_MODE_RGMII2 10
+#define MT7620_GPIO_MODE_SPI 11
+#define MT7620_GPIO_MODE_SPI_REF_CLK 12
+#define MT7620_GPIO_MODE_WLED 13
+#define MT7620_GPIO_MODE_JTAG 15
+#define MT7620_GPIO_MODE_EPHY 15
+#define MT7620_GPIO_MODE_PA 20
+
+static inline int mt7620_get_eco(void)
+{
+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
+}
#endif
diff --git a/arch/mips/include/asm/mach-ralink/pinmux.h b/arch/mips/include/asm/mach-ralink/pinmux.h
new file mode 100644
index 000000000000..be106cb2e26d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _RT288X_PINMUX_H__
+#define _RT288X_PINMUX_H__
+
+#define FUNC(name, value, pin_first, pin_count) \
+ { name, value, pin_first, pin_count }
+
+#define GRP(_name, _func, _mask, _shift) \
+ { .name = _name, .mask = _mask, .shift = _shift, \
+ .func = _func, .gpio = _mask, \
+ .func_count = ARRAY_SIZE(_func) }
+
+#define GRP_G(_name, _func, _mask, _gpio, _shift) \
+ { .name = _name, .mask = _mask, .shift = _shift, \
+ .func = _func, .gpio = _gpio, \
+ .func_count = ARRAY_SIZE(_func) }
+
+struct rt2880_pmx_group;
+
+struct rt2880_pmx_func {
+ const char *name;
+ const char value;
+
+ int pin_first;
+ int pin_count;
+ int *pins;
+
+ int *groups;
+ int group_count;
+
+ int enabled;
+};
+
+struct rt2880_pmx_group {
+ const char *name;
+ int enabled;
+
+ const u32 shift;
+ const char mask;
+ const char gpio;
+
+ struct rt2880_pmx_func *func;
+ int func_count;
+};
+
+extern struct rt2880_pmx_group *rt2880_pinmux_data;
+
+#endif
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
index 5a508f9f9432..bd93014490df 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
return __raw_readl(rt_sysc_membase + reg);
}
+static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
+{
+ u32 val = rt_sysc_r32(reg) & ~clr;
+
+ __raw_writel(val | set, rt_sysc_membase + reg);
+}
+
static inline void rt_memc_w32(u32 val, unsigned reg)
{
__raw_writel(val, rt_memc_membase + reg);
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 069bf37a6010..96f731bac79a 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
#define RT305X_GPIO_GE0_TXD0 40
#define RT305X_GPIO_GE0_RXCLK 51
-#define RT305X_GPIO_MODE_I2C BIT(0)
-#define RT305X_GPIO_MODE_SPI BIT(1)
#define RT305X_GPIO_MODE_UART0_SHIFT 2
#define RT305X_GPIO_MODE_UART0_MASK 0x7
#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
-#define RT305X_GPIO_MODE_UARTF 0x0
-#define RT305X_GPIO_MODE_PCM_UARTF 0x1
-#define RT305X_GPIO_MODE_PCM_I2S 0x2
-#define RT305X_GPIO_MODE_I2S_UARTF 0x3
-#define RT305X_GPIO_MODE_PCM_GPIO 0x4
-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
-#define RT305X_GPIO_MODE_GPIO_I2S 0x6
-#define RT305X_GPIO_MODE_GPIO 0x7
-#define RT305X_GPIO_MODE_UART1 BIT(5)
-#define RT305X_GPIO_MODE_JTAG BIT(6)
-#define RT305X_GPIO_MODE_MDIO BIT(7)
-#define RT305X_GPIO_MODE_SDRAM BIT(8)
-#define RT305X_GPIO_MODE_RGMII BIT(9)
+#define RT305X_GPIO_MODE_UARTF 0
+#define RT305X_GPIO_MODE_PCM_UARTF 1
+#define RT305X_GPIO_MODE_PCM_I2S 2
+#define RT305X_GPIO_MODE_I2S_UARTF 3
+#define RT305X_GPIO_MODE_PCM_GPIO 4
+#define RT305X_GPIO_MODE_GPIO_UARTF 5
+#define RT305X_GPIO_MODE_GPIO_I2S 6
+#define RT305X_GPIO_MODE_GPIO 7
+
+#define RT305X_GPIO_MODE_I2C 0
+#define RT305X_GPIO_MODE_SPI 1
+#define RT305X_GPIO_MODE_UART1 5
+#define RT305X_GPIO_MODE_JTAG 6
+#define RT305X_GPIO_MODE_MDIO 7
+#define RT305X_GPIO_MODE_SDRAM 8
+#define RT305X_GPIO_MODE_RGMII 9
+#define RT5350_GPIO_MODE_PHY_LED 14
+#define RT5350_GPIO_MODE_SPI_CS1 21
+#define RT3352_GPIO_MODE_LNA 18
+#define RT3352_GPIO_MODE_PA 20
#define RT3352_SYSC_REG_SYSCFG0 0x010
#define RT3352_SYSC_REG_SYSCFG1 0x014
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
index 058382f37f92..0fbe6f9257cd 100644
--- a/arch/mips/include/asm/mach-ralink/rt3883.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -112,8 +112,6 @@
#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
-#define RT3883_GPIO_MODE_I2C BIT(0)
-#define RT3883_GPIO_MODE_SPI BIT(1)
#define RT3883_GPIO_MODE_UART0_SHIFT 2
#define RT3883_GPIO_MODE_UART0_MASK 0x7
#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
@@ -125,11 +123,15 @@
#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
#define RT3883_GPIO_MODE_GPIO_I2S 0x6
#define RT3883_GPIO_MODE_GPIO 0x7
-#define RT3883_GPIO_MODE_UART1 BIT(5)
-#define RT3883_GPIO_MODE_JTAG BIT(6)
-#define RT3883_GPIO_MODE_MDIO BIT(7)
-#define RT3883_GPIO_MODE_GE1 BIT(9)
-#define RT3883_GPIO_MODE_GE2 BIT(10)
+
+#define RT3883_GPIO_MODE_I2C 0
+#define RT3883_GPIO_MODE_SPI 1
+#define RT3883_GPIO_MODE_UART1 5
+#define RT3883_GPIO_MODE_JTAG 6
+#define RT3883_GPIO_MODE_MDIO 7
+#define RT3883_GPIO_MODE_GE1 9
+#define RT3883_GPIO_MODE_GE2 10
+
#define RT3883_GPIO_MODE_PCI_SHIFT 11
#define RT3883_GPIO_MODE_PCI_MASK 0x7
#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
index d8106f75b9af..5d154cfbcf4c 100644
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ b/arch/mips/include/asm/mach-sead3/irq.h
@@ -1,7 +1,6 @@
#ifndef __ASM_MACH_MIPS_IRQ_H
#define __ASM_MACH_MIPS_IRQ_H
-#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
#define NR_IRQS 256
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
index 93c6c04ffda3..0874cd2b06d7 100644
--- a/arch/mips/include/asm/mach-tx39xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -15,12 +15,12 @@
* Allow physical addresses to be fixed up to help peripherals located
* outside the low 32-bit range -- generic pass-through version.
*/
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return phys_addr;
}
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
#define TXX9_DIRECTMAP_BASE 0xff000000ul
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
index 1e7beae72229..4b6a8441b25f 100644
--- a/arch/mips/include/asm/mach-tx49xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -15,12 +15,12 @@
* Allow physical addresses to be fixed up to help peripherals located
* outside the low 32-bit range -- generic pass-through version.
*/
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
return phys_addr;
}
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
#ifdef CONFIG_64BIT
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index e330732ddf98..987ff580466b 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -10,7 +10,7 @@
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
-#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+#include <linux/irqchip/mips-gic.h>
/*
* Interrupts 0..15 are used for Malta ISA compatible interrupts
@@ -22,29 +22,28 @@
#define MIPSCPU_INT_SW1 1
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
+#define MIPSCPU_INT_GIC MIPSCPU_INT_MB0 /* GIC chained interrupt */
#define MIPSCPU_INT_MB1 3
#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */
#define MIPSCPU_INT_MB2 4
-#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
/*
- * Interrupts 64..127 are used for Soc-it Classic interrupts
+ * Interrupts 96..127 are used for Soc-it Classic interrupts
*/
-#define MSC01C_INT_BASE 64
+#define MSC01C_INT_BASE 96
/* SOC-it Classic interrupt offsets */
#define MSC01C_INT_TMR 0
#define MSC01C_INT_PCI 1
/*
- * Interrupts 64..127 are used for Soc-it EIC interrupts
+ * Interrupts 96..127 are used for Soc-it EIC interrupts
*/
-#define MSC01E_INT_BASE 64
+#define MSC01E_INT_BASE 96
/* SOC-it EIC interrupt offsets */
#define MSC01E_INT_SW0 1
@@ -63,14 +62,7 @@
#define MSC01E_INT_PERFCTR 10
#define MSC01E_INT_CPUCTR 11
-/* External Interrupts used for IPI */
-#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
-#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19
-#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21
-#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23
+/* GIC external interrupts */
+#define GIC_INT_I8259A GIC_SHARED_TO_HWIRQ(3)
#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
index 6b17aaf7d901..8932c7de0419 100644
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ b/arch/mips/include/asm/mips-boards/sead3int.h
@@ -10,10 +10,23 @@
#ifndef _MIPS_SEAD3INT_H
#define _MIPS_SEAD3INT_H
+#include <linux/irqchip/mips-gic.h>
+
/* SEAD-3 GIC address space definitions. */
#define GIC_BASE_ADDR 0x1b1c0000
#define GIC_ADDRSPACE_SZ (128 * 1024)
-#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 0)
+/* CPU interrupt offsets */
+#define CPU_INT_GIC 2
+#define CPU_INT_EHCI 2
+#define CPU_INT_UART0 4
+#define CPU_INT_UART1 4
+#define CPU_INT_NET 6
+
+/* GIC interrupt offsets */
+#define GIC_INT_NET GIC_SHARED_TO_HWIRQ(0)
+#define GIC_INT_UART1 GIC_SHARED_TO_HWIRQ(2)
+#define GIC_INT_UART0 GIC_SHARED_TO_HWIRQ(3)
+#define GIC_INT_EHCI GIC_SHARED_TO_HWIRQ(5)
#endif /* !(_MIPS_SEAD3INT_H) */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 6a9d2dd005ca..b95a827d763e 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -30,7 +30,7 @@ extern void __iomem *mips_cm_l2sync_base;
* different way by defining a function with the same prototype except for the
* name mips_cm_phys_base (without underscores).
*/
-extern phys_t __mips_cm_phys_base(void);
+extern phys_addr_t __mips_cm_phys_base(void);
/**
* mips_cm_probe - probe for a Coherence Manager
diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h
index e139a534e0fd..1cebe8c79051 100644
--- a/arch/mips/include/asm/mips-cpc.h
+++ b/arch/mips/include/asm/mips-cpc.h
@@ -25,7 +25,7 @@ extern void __iomem *mips_cpc_base;
* memory mapped registers. This is platform dependant & must therefore be
* implemented per-platform.
*/
-extern phys_t mips_cpc_default_phys_base(void);
+extern phys_addr_t mips_cpc_default_phys_base(void);
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
@@ -35,7 +35,7 @@ extern phys_t mips_cpc_default_phys_base(void);
* is present. It may be overriden by individual platforms which determine
* this address in a different way.
*/
-extern phys_t __weak mips_cpc_phys_base(void);
+extern phys_addr_t __weak mips_cpc_phys_base(void);
/**
* mips_cpc_probe - probe for a Cluster Power Controller
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 22a135ac91de..5e4aef304b02 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -653,6 +653,9 @@
#define MIPS_CONF5_NF (_ULCAST_(1) << 0)
#define MIPS_CONF5_UFR (_ULCAST_(1) << 2)
#define MIPS_CONF5_MRP (_ULCAST_(1) << 3)
+#define MIPS_CONF5_MVH (_ULCAST_(1) << 5)
+#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
+#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
#define MIPS_CONF5_EVA (_ULCAST_(1) << 28)
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
@@ -694,6 +697,7 @@
#define MIPS_FPIR_W (_ULCAST_(1) << 20)
#define MIPS_FPIR_L (_ULCAST_(1) << 21)
#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+#define MIPS_FPIR_FREP (_ULCAST_(1) << 29)
/*
* Bits in the MIPS32 Memory Segmentation registers.
@@ -994,6 +998,39 @@ do { \
local_irq_restore(__flags); \
} while (0)
+#define __readx_32bit_c0_register(source) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips32r2 \n" \
+ " .insn \n" \
+ " # mfhc0 $1, %1 \n" \
+ " .word (0x40410000 | ((%1 & 0x1f) << 11)) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (source)); \
+ __res; \
+})
+
+#define __writex_32bit_c0_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips32r2 \n" \
+ " move $1, %0 \n" \
+ " # mthc0 $1, %1 \n" \
+ " .insn \n" \
+ " .word (0x40c10000 | ((%1 & 0x1f) << 11)) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (value), "i" (register)); \
+} while (0)
+
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
@@ -1003,9 +1040,15 @@ do { \
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+#define readx_c0_entrylo0() __readx_32bit_c0_register(2)
+#define writex_c0_entrylo0(val) __writex_32bit_c0_register(2, val)
+
#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+#define readx_c0_entrylo1() __readx_32bit_c0_register(3)
+#define writex_c0_entrylo1(val) __writex_32bit_c0_register(3, val)
+
#define read_c0_conf() __read_32bit_c0_register($3, 0)
#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index 024a71b2bff9..75739c83f07e 100644
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -76,6 +76,8 @@
#include <linux/prefetch.h>
+#include <asm/compiler.h>
+
#include <asm/octeon/cvmx-fpa.h>
/**
* By default we disable the max depth support. Most programs
@@ -273,7 +275,7 @@ static inline void __cvmx_cmd_queue_lock(cvmx_cmd_queue_id_t queue_id,
" lbu %[ticket], %[now_serving]\n"
"4:\n"
".set pop\n" :
- [ticket_ptr] "=m"(__cvmx_cmd_queue_state_ptr->ticket[__cvmx_cmd_queue_get_index(queue_id)]),
+ [ticket_ptr] "=" GCC_OFF12_ASM()(__cvmx_cmd_queue_state_ptr->ticket[__cvmx_cmd_queue_get_index(queue_id)]),
[now_serving] "=m"(qptr->now_serving), [ticket] "=r"(tmp),
[my_ticket] "=r"(my_ticket)
);
diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
index 4b4d0ecfd9eb..2188e65afb86 100644
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -1066,7 +1066,7 @@ static inline void __cvmx_pow_warn_if_pending_switch(const char *function)
uint64_t switch_complete;
CVMX_MF_CHORD(switch_complete);
if (!switch_complete)
- pr_warning("%s called with tag switch in progress\n", function);
+ pr_warn("%s called with tag switch in progress\n", function);
}
/**
@@ -1084,8 +1084,7 @@ static inline void cvmx_pow_tag_sw_wait(void)
if (unlikely(switch_complete))
break;
if (unlikely(cvmx_get_cycle() > start_cycle + MAX_CYCLES)) {
- pr_warning("Tag switch is taking a long time, "
- "possible deadlock\n");
+ pr_warn("Tag switch is taking a long time, possible deadlock\n");
start_cycle = -MAX_CYCLES - 1;
}
}
@@ -1296,19 +1295,16 @@ static inline void cvmx_pow_tag_sw_nocheck(uint32_t tag,
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
- pr_warning("%s called with NULL_NULL tag\n",
- __func__);
+ pr_warn("%s called with NULL_NULL tag\n", __func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called with NULL tag\n", __func__);
+ pr_warn("%s called with NULL tag\n", __func__);
if ((current_tag.s.type == tag_type)
&& (current_tag.s.tag == tag))
- pr_warning("%s called to perform a tag switch to the "
- "same tag\n",
- __func__);
+ pr_warn("%s called to perform a tag switch to the same tag\n",
+ __func__);
if (tag_type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called to perform a tag switch to "
- "NULL. Use cvmx_pow_tag_sw_null() instead\n",
- __func__);
+ pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
+ __func__);
}
/*
@@ -1407,23 +1403,19 @@ static inline void cvmx_pow_tag_sw_full_nocheck(cvmx_wqe_t *wqp, uint32_t tag,
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
- pr_warning("%s called with NULL_NULL tag\n",
- __func__);
+ pr_warn("%s called with NULL_NULL tag\n", __func__);
if ((current_tag.s.type == tag_type)
&& (current_tag.s.tag == tag))
- pr_warning("%s called to perform a tag switch to "
- "the same tag\n",
- __func__);
+ pr_warn("%s called to perform a tag switch to the same tag\n",
+ __func__);
if (tag_type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called to perform a tag switch to "
- "NULL. Use cvmx_pow_tag_sw_null() instead\n",
- __func__);
+ pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
+ __func__);
if (wqp != cvmx_phys_to_ptr(0x80))
if (wqp != cvmx_pow_get_current_wqp())
- pr_warning("%s passed WQE(%p) doesn't match "
- "the address in the POW(%p)\n",
- __func__, wqp,
- cvmx_pow_get_current_wqp());
+ pr_warn("%s passed WQE(%p) doesn't match the address in the POW(%p)\n",
+ __func__, wqp,
+ cvmx_pow_get_current_wqp());
}
/*
@@ -1507,12 +1499,10 @@ static inline void cvmx_pow_tag_sw_null_nocheck(void)
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
- pr_warning("%s called with NULL_NULL tag\n",
- __func__);
+ pr_warn("%s called with NULL_NULL tag\n", __func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called when we already have a "
- "NULL tag\n",
- __func__);
+ pr_warn("%s called when we already have a NULL tag\n",
+ __func__);
}
tag_req.u64 = 0;
@@ -1725,17 +1715,14 @@ static inline void cvmx_pow_tag_sw_desched_nocheck(
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
- pr_warning("%s called with NULL_NULL tag\n",
- __func__);
+ pr_warn("%s called with NULL_NULL tag\n", __func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called with NULL tag. Deschedule not "
- "allowed from NULL state\n",
- __func__);
+ pr_warn("%s called with NULL tag. Deschedule not allowed from NULL state\n",
+ __func__);
if ((current_tag.s.type != CVMX_POW_TAG_TYPE_ATOMIC)
&& (tag_type != CVMX_POW_TAG_TYPE_ATOMIC))
- pr_warning("%s called where neither the before or "
- "after tag is ATOMIC\n",
- __func__);
+ pr_warn("%s called where neither the before or after tag is ATOMIC\n",
+ __func__);
}
tag_req.u64 = 0;
@@ -1832,12 +1819,10 @@ static inline void cvmx_pow_desched(uint64_t no_sched)
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
- pr_warning("%s called with NULL_NULL tag\n",
- __func__);
+ pr_warn("%s called with NULL_NULL tag\n", __func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
- pr_warning("%s called with NULL tag. Deschedule not "
- "expected from NULL state\n",
- __func__);
+ pr_warn("%s called with NULL tag. Deschedule not expected from NULL state\n",
+ __func__);
}
/* Need to make sure any writes to the work queue entry are complete */
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index f991e7701d3d..33db1c806b01 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -451,67 +451,4 @@ static inline uint32_t cvmx_octeon_num_cores(void)
return cvmx_pop(ciu_fuse);
}
-/**
- * Read a byte of fuse data
- * @byte_addr: address to read
- *
- * Returns fuse value: 0 or 1
- */
-static uint8_t cvmx_fuse_read_byte(int byte_addr)
-{
- union cvmx_mio_fus_rcmd read_cmd;
-
- read_cmd.u64 = 0;
- read_cmd.s.addr = byte_addr;
- read_cmd.s.pend = 1;
- cvmx_write_csr(CVMX_MIO_FUS_RCMD, read_cmd.u64);
- while ((read_cmd.u64 = cvmx_read_csr(CVMX_MIO_FUS_RCMD))
- && read_cmd.s.pend)
- ;
- return read_cmd.s.dat;
-}
-
-/**
- * Read a single fuse bit
- *
- * @fuse: Fuse number (0-1024)
- *
- * Returns fuse value: 0 or 1
- */
-static inline int cvmx_fuse_read(int fuse)
-{
- return (cvmx_fuse_read_byte(fuse >> 3) >> (fuse & 0x7)) & 1;
-}
-
-static inline int cvmx_octeon_model_CN36XX(void)
-{
- return OCTEON_IS_MODEL(OCTEON_CN38XX)
- && !cvmx_octeon_is_pass1()
- && cvmx_fuse_read(264);
-}
-
-static inline int cvmx_octeon_zip_present(void)
-{
- return octeon_has_feature(OCTEON_FEATURE_ZIP);
-}
-
-static inline int cvmx_octeon_dfa_present(void)
-{
- if (!OCTEON_IS_MODEL(OCTEON_CN38XX)
- && !OCTEON_IS_MODEL(OCTEON_CN31XX)
- && !OCTEON_IS_MODEL(OCTEON_CN58XX))
- return 0;
- else if (OCTEON_IS_MODEL(OCTEON_CN3020))
- return 0;
- else if (cvmx_octeon_is_pass1())
- return 1;
- else
- return !cvmx_fuse_read(120);
-}
-
-static inline int cvmx_octeon_crypto_present(void)
-{
- return octeon_has_feature(OCTEON_FEATURE_CRYPTO);
-}
-
#endif /* __CVMX_H__ */
diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h
index 90e05a8d4b15..c4fe81f47f53 100644
--- a/arch/mips/include/asm/octeon/octeon-feature.h
+++ b/arch/mips/include/asm/octeon/octeon-feature.h
@@ -86,8 +86,6 @@ enum octeon_feature {
OCTEON_MAX_FEATURE
};
-static inline int cvmx_fuse_read(int fuse);
-
/**
* Determine if the current Octeon supports a specific feature. These
* checks have been optimized to be fairly quick, but they should still
@@ -105,33 +103,6 @@ static inline int octeon_has_feature(enum octeon_feature feature)
case OCTEON_FEATURE_SAAD:
return !OCTEON_IS_MODEL(OCTEON_CN3XXX);
- case OCTEON_FEATURE_ZIP:
- if (OCTEON_IS_MODEL(OCTEON_CN30XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX)
- || OCTEON_IS_MODEL(OCTEON_CN52XX))
- return 0;
- else if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1))
- return 1;
- else
- return !cvmx_fuse_read(121);
-
- case OCTEON_FEATURE_CRYPTO:
- if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) {
- union cvmx_mio_fus_dat2 fus_2;
- fus_2.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT2);
- if (fus_2.s.nocrypto || fus_2.s.nomul) {
- return 0;
- } else if (!fus_2.s.dorm_crypto) {
- return 1;
- } else {
- union cvmx_rnm_ctl_status st;
- st.u64 = cvmx_read_csr(CVMX_RNM_CTL_STATUS);
- return st.s.eer_val;
- }
- } else {
- return !cvmx_fuse_read(90);
- }
-
case OCTEON_FEATURE_DORM_CRYPTO:
if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) {
union cvmx_mio_fus_dat2 fus_2;
@@ -188,29 +159,6 @@ static inline int octeon_has_feature(enum octeon_feature feature)
&& !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
&& !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X);
- case OCTEON_FEATURE_DFA:
- if (!OCTEON_IS_MODEL(OCTEON_CN38XX)
- && !OCTEON_IS_MODEL(OCTEON_CN31XX)
- && !OCTEON_IS_MODEL(OCTEON_CN58XX))
- return 0;
- else if (OCTEON_IS_MODEL(OCTEON_CN3020))
- return 0;
- else
- return !cvmx_fuse_read(120);
-
- case OCTEON_FEATURE_HFA:
- if (!OCTEON_IS_MODEL(OCTEON_CN6XXX))
- return 0;
- else
- return !cvmx_fuse_read(90);
-
- case OCTEON_FEATURE_DFM:
- if (!(OCTEON_IS_MODEL(OCTEON_CN63XX)
- || OCTEON_IS_MODEL(OCTEON_CN66XX)))
- return 0;
- else
- return !cvmx_fuse_read(90);
-
case OCTEON_FEATURE_MDIO_CLAUSE_45:
return !(OCTEON_IS_MODEL(OCTEON_CN3XXX)
|| OCTEON_IS_MODEL(OCTEON_CN58XX)
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
index e2c122c6a657..e8a1c2fd52cd 100644
--- a/arch/mips/include/asm/octeon/octeon-model.h
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -326,8 +326,7 @@ static inline int __octeon_is_model_runtime__(uint32_t model)
#define OCTEON_IS_COMMON_BINARY() 1
#undef OCTEON_MODEL
-const char *octeon_model_get_string(uint32_t chip_id);
-const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer);
+const char *__init octeon_model_get_string(uint32_t chip_id);
/*
* Return the octeon family, i.e., ProcessorID of the PrID register.
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
index 2474fc5d1751..af81ab0da55f 100644
--- a/arch/mips/include/asm/paccess.h
+++ b/arch/mips/include/asm/paccess.h
@@ -56,6 +56,7 @@ struct __large_pstruct { unsigned long buf[100]; };
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
"2:\n\t" \
+ ".insn\n\t" \
".section\t.fixup,\"ax\"\n" \
"3:\tli\t%0,%3\n\t" \
"move\t%1,$0\n\t" \
@@ -94,6 +95,7 @@ extern void __get_dbe_unknown(void);
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
"2:\n\t" \
+ ".insn\n\t" \
".section\t.fixup,\"ax\"\n" \
"3:\tli\t%0,%3\n\t" \
"j\t2b\n\t" \
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 3be81803595d..154b70a10483 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -116,7 +116,7 @@ extern void copy_user_highpage(struct page *to, struct page *from,
/*
* These are used to make use of C type-checking..
*/
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
#ifdef CONFIG_CPU_MIPS32
typedef struct { unsigned long pte_low, pte_high; } pte_t;
#define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 974b0e308963..69529624a005 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -84,7 +84,7 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
resource_size_t *end)
{
- phys_t size = resource_size(rsrc);
+ phys_addr_t size = resource_size(rsrc);
*start = fixup_bigphys_addr(rsrc->start, size);
*end = rsrc->start + size;
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index cd7d6064bcbe..68984b612f9d 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -69,7 +69,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
#endif
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
#define pte_ERROR(e) \
printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
#else
@@ -103,7 +103,7 @@ static inline void pmd_clear(pmd_t *pmdp)
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t
@@ -126,7 +126,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT))
#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << _PFN_SHIFT) | pgprot_val(prot))
#endif
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
#define __pgd_offset(address) pgd_index(address)
#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
@@ -155,73 +155,75 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
/* Swap entries must have VALID bit cleared. */
-#define __swp_type(x) (((x).val >> 10) & 0x1f)
-#define __swp_offset(x) ((x).val >> 15)
-#define __swp_entry(type,offset) \
- ((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+#define __swp_type(x) (((x).val >> 10) & 0x1f)
+#define __swp_offset(x) ((x).val >> 15)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
- * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
+ * Encode and decode a nonlinear file mapping entry
*/
-#define PTE_FILE_MAX_BITS 28
-
-#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
- (((_pte).pte >> 2 ) & 0x38) | \
- (((_pte).pte >> 10) << 6 ))
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
+ (((_pte).pte >> 2 ) & 0x38) | \
+ (((_pte).pte >> 10) << 6 ))
-#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
- (((off) & 0x38) << 2 ) | \
- (((off) >> 6 ) << 10) | \
- _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
+ (((off) & 0x38) << 2 ) | \
+ (((off) >> 6 ) << 10) | \
+ _PAGE_FILE })
+/*
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS 28
#else
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+
/* Swap entries must have VALID and GLOBAL bits cleared. */
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
-#define __swp_type(x) (((x).val >> 2) & 0x1f)
-#define __swp_offset(x) ((x).val >> 7)
-#define __swp_entry(type,offset) \
- ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
-#else
-#define __swp_type(x) (((x).val >> 8) & 0x1f)
-#define __swp_offset(x) ((x).val >> 13)
-#define __swp_entry(type,offset) \
- ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 7)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
/*
* Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
*/
-#define PTE_FILE_MAX_BITS 30
-
-#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
-#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
+#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
+#define PTE_FILE_MAX_BITS 30
#else
/*
- * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ * Constraints:
+ * _PAGE_PRESENT at bit 0
+ * _PAGE_MODIFIED at bit 4
+ * _PAGE_GLOBAL at bit 6
+ * _PAGE_VALID at bit 7
*/
-#define PTE_FILE_MAX_BITS 28
+#define __swp_type(x) (((x).val >> 8) & 0x1f)
+#define __swp_offset(x) ((x).val >> 13)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
- (((_pte).pte >> 2) & 0x8) | \
- (((_pte).pte >> 8) << 4))
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
+ (((_pte).pte >> 2) & 0x8) | \
+ (((_pte).pte >> 8) << 4))
-#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
- (((off) & 0x8) << 2) | \
- (((off) >> 4) << 8) | \
- _PAGE_FILE })
-#endif
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
+ (((off) & 0x8) << 2) | \
+ (((off) >> 4) << 8) | \
+ _PAGE_FILE })
-#endif
+#define PTE_FILE_MAX_BITS 28
+#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
-#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
-#else
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-#endif
+#endif /* defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) */
#endif /* _ASM_PGTABLE_32_H */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index e747bfa0be7e..ca11f14f40a3 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -32,39 +32,41 @@
* unpredictable things. The code (when it is written) to deal with
* this problem will be in the update_mmu_cache() code for the r4k.
*/
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
/*
* The following bits are directly used by the TLB hardware
*/
-#define _PAGE_R4KBUG (1 << 0) /* workaround for r4k bug */
-#define _PAGE_GLOBAL (1 << 0)
-#define _PAGE_VALID_SHIFT 1
+#define _PAGE_GLOBAL_SHIFT 0
+#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
+#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1)
#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
-#define _PAGE_SILENT_READ (1 << 1) /* synonym */
-#define _PAGE_DIRTY_SHIFT 2
-#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) /* The MIPS dirty bit */
-#define _PAGE_SILENT_WRITE (1 << 2)
-#define _CACHE_SHIFT 3
-#define _CACHE_MASK (7 << 3)
+#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1)
+#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT)
+#define _CACHE_SHIFT (_PAGE_DIRTY_SHIFT + 1)
+#define _CACHE_MASK (7 << _CACHE_SHIFT)
/*
* The following bits are implemented in software
*
* _PAGE_FILE semantics: set:pagecache unset:swap
*/
-#define _PAGE_PRESENT_SHIFT 6
+#define _PAGE_PRESENT_SHIFT (_CACHE_SHIFT + 3)
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
-#define _PAGE_READ_SHIFT 7
+#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1)
#define _PAGE_READ (1 << _PAGE_READ_SHIFT)
-#define _PAGE_WRITE_SHIFT 8
+#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1)
#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT)
-#define _PAGE_ACCESSED_SHIFT 9
+#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1)
#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
-#define _PAGE_MODIFIED_SHIFT 10
+#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1)
#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
-#define _PAGE_FILE (1 << 10)
+#define _PAGE_SILENT_READ _PAGE_VALID
+#define _PAGE_SILENT_WRITE _PAGE_DIRTY
+#define _PAGE_FILE _PAGE_MODIFIED
+
+#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
@@ -172,7 +174,7 @@
#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT && defined(CONFIG_CPU_MIPS32) */
#ifndef _PFN_SHIFT
#define _PFN_SHIFT PAGE_SHIFT
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index d6d1928539b1..62a6ba383d4f 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -125,7 +125,7 @@ do { \
extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
pte_t pteval);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
@@ -227,7 +227,7 @@ extern pgd_t swapper_pg_dir[];
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
@@ -297,13 +297,13 @@ static inline pte_t pte_wrprotect(pte_t pte)
static inline pte_t pte_mkclean(pte_t pte)
{
- pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+ pte_val(pte) &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
- pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+ pte_val(pte) &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
return pte;
}
@@ -382,13 +382,13 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_high &= ~0x3f;
+ pte.pte_high &= (_PFN_MASK | _CACHE_MASK);
pte.pte_low |= pgprot_val(newprot);
- pte.pte_high |= pgprot_val(newprot) & 0x3f;
+ pte.pte_high |= pgprot_val(newprot) & ~(_PFN_MASK | _CACHE_MASK);
return pte;
}
#else
@@ -419,7 +419,7 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
#define kern_addr_valid(addr) (1)
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
static inline int io_remap_pfn_range(struct vm_area_struct *vma,
@@ -428,7 +428,7 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
unsigned long size,
pgprot_t prot)
{
- phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+ phys_addr_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
}
#define io_remap_pfn_range io_remap_pfn_range
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index a9494c0141fb..eaa26270a5e5 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -22,6 +22,7 @@ extern void device_tree_init(void);
struct boot_param_header;
extern void __dt_setup_arch(void *bph);
+extern int __dt_register_buses(const char *bus0, const char *bus1);
#define dt_setup_arch(sym) \
({ \
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index cd6e0afc6833..e293a8d89a6d 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -47,79 +47,20 @@ extern void (*r4k_blast_icache)(void);
#ifdef CONFIG_MIPS_MT
-/*
- * Optionally force single-threaded execution during I-cache flushes.
- */
-#define PROTECT_CACHE_FLUSHES 1
-
-#ifdef PROTECT_CACHE_FLUSHES
-
-extern int mt_protiflush;
-extern int mt_protdflush;
-extern void mt_cflush_lockdown(void);
-extern void mt_cflush_release(void);
-
-#define BEGIN_MT_IPROT \
- unsigned long flags = 0; \
- unsigned long mtflags = 0; \
- if(mt_protiflush) { \
- local_irq_save(flags); \
- ehb(); \
- mtflags = dvpe(); \
- mt_cflush_lockdown(); \
- }
-
-#define END_MT_IPROT \
- if(mt_protiflush) { \
- mt_cflush_release(); \
- evpe(mtflags); \
- local_irq_restore(flags); \
- }
-
-#define BEGIN_MT_DPROT \
- unsigned long flags = 0; \
- unsigned long mtflags = 0; \
- if(mt_protdflush) { \
- local_irq_save(flags); \
- ehb(); \
- mtflags = dvpe(); \
- mt_cflush_lockdown(); \
- }
-
-#define END_MT_DPROT \
- if(mt_protdflush) { \
- mt_cflush_release(); \
- evpe(mtflags); \
- local_irq_restore(flags); \
- }
-
-#else
-
-#define BEGIN_MT_IPROT
-#define BEGIN_MT_DPROT
-#define END_MT_IPROT
-#define END_MT_DPROT
-
-#endif /* PROTECT_CACHE_FLUSHES */
-
#define __iflush_prologue \
unsigned long redundance; \
extern int mt_n_iflushes; \
- BEGIN_MT_IPROT \
for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
#define __iflush_epilogue \
- END_MT_IPROT \
}
#define __dflush_prologue \
unsigned long redundance; \
extern int mt_n_dflushes; \
- BEGIN_MT_DPROT \
for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
#define __dflush_epilogue \
- END_MT_DPROT \
}
#define __inv_dflush_prologue __dflush_prologue
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..c6d06d383ef9 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -12,6 +12,7 @@
#include <linux/compiler.h>
#include <asm/barrier.h>
+#include <asm/compiler.h>
#include <asm/war.h>
/*
@@ -88,7 +89,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
" subu %[ticket], %[ticket], 1 \n"
" .previous \n"
" .set pop \n"
- : [ticket_ptr] "+m" (lock->lock),
+ : [ticket_ptr] "+" GCC_OFF12_ASM() (lock->lock),
[serving_now_ptr] "+m" (lock->h.serving_now),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (my_ticket)
@@ -121,7 +122,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
" subu %[ticket], %[ticket], 1 \n"
" .previous \n"
" .set pop \n"
- : [ticket_ptr] "+m" (lock->lock),
+ : [ticket_ptr] "+" GCC_OFF12_ASM() (lock->lock),
[serving_now_ptr] "+m" (lock->h.serving_now),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (my_ticket)
@@ -163,7 +164,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
" li %[ticket], 0 \n"
" .previous \n"
" .set pop \n"
- : [ticket_ptr] "+m" (lock->lock),
+ : [ticket_ptr] "+" GCC_OFF12_ASM() (lock->lock),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (tmp2),
[now_serving] "=&r" (tmp3)
@@ -187,7 +188,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
" li %[ticket], 0 \n"
" .previous \n"
" .set pop \n"
- : [ticket_ptr] "+m" (lock->lock),
+ : [ticket_ptr] "+" GCC_OFF12_ASM() (lock->lock),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (tmp2),
[now_serving] "=&r" (tmp3)
@@ -234,8 +235,8 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
" beqzl %1, 1b \n"
" nop \n"
" .set reorder \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} else {
do {
@@ -244,8 +245,8 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
" bltz %1, 1b \n"
" addu %1, 1 \n"
"2: sc %1, %0 \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} while (unlikely(!tmp));
}
@@ -268,8 +269,8 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
" sub %1, 1 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} else {
do {
@@ -277,8 +278,8 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
"1: ll %1, %2 # arch_read_unlock \n"
" sub %1, 1 \n"
" sc %1, %0 \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} while (unlikely(!tmp));
}
@@ -298,8 +299,8 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
" beqzl %1, 1b \n"
" nop \n"
" .set reorder \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} else {
do {
@@ -308,8 +309,8 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
" bnez %1, 1b \n"
" lui %1, 0x8000 \n"
"2: sc %1, %0 \n"
- : "=m" (rw->lock), "=&r" (tmp)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} while (unlikely(!tmp));
}
@@ -348,8 +349,8 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
__WEAK_LLSC_MB
" li %2, 1 \n"
"2: \n"
- : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} else {
__asm__ __volatile__(
@@ -365,8 +366,8 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
__WEAK_LLSC_MB
" li %2, 1 \n"
"2: \n"
- : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
}
@@ -392,8 +393,8 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
" li %2, 1 \n"
" .set reorder \n"
"2: \n"
- : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} else {
do {
@@ -405,8 +406,9 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
" sc %1, %0 \n"
" li %2, 1 \n"
"2: \n"
- : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
- : "m" (rw->lock)
+ : "=" GCC_OFF12_ASM() (rw->lock), "=&r" (tmp),
+ "=&r" (ret)
+ : GCC_OFF12_ASM() (rw->lock)
: "memory");
} while (unlikely(!tmp));
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 7de865805deb..99eea59604e9 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -116,6 +116,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACEPOINT 26 /* syscall tracepoint instrumentation */
#define TIF_32BIT_FPREGS 27 /* 32-bit floating point registers */
+#define TIF_HYBRID_FPREGS 28 /* 64b FP registers, odd singles in bits 63:32 of even doubles */
#define TIF_USEDMSA 29 /* MSA has been used this quantum */
#define TIF_MSA_CTX_LIVE 30 /* MSA context must be preserved */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
@@ -135,6 +136,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_FPUBOUND (1<<TIF_FPUBOUND)
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
#define _TIF_32BIT_FPREGS (1<<TIF_32BIT_FPREGS)
+#define _TIF_HYBRID_FPREGS (1<<TIF_HYBRID_FPREGS)
#define _TIF_USEDMSA (1<<TIF_USEDMSA)
#define _TIF_MSA_CTX_LIVE (1<<TIF_MSA_CTX_LIVE)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 8f3047d611ee..8ab2874225c4 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -46,19 +46,17 @@ extern unsigned int mips_hpt_frequency;
* so it lives here.
*/
extern int (*perf_irq)(void);
+extern int __weak get_c0_perfcount_int(void);
/*
* Initialize the calling CPU's compare interrupt as clockevent device
*/
extern unsigned int __weak get_c0_compare_int(void);
extern int r4k_clockevent_init(void);
-extern int gic_clockevent_init(void);
static inline int mips_clockevent_init(void)
{
-#if defined(CONFIG_CEVT_GIC)
- return (gic_clockevent_init() | r4k_clockevent_init());
-#elif defined(CONFIG_CEVT_R4K)
+#ifdef CONFIG_CEVT_R4K
return r4k_clockevent_init();
#else
return -ENXIO;
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
index a845aafedee4..148d42a17f30 100644
--- a/arch/mips/include/asm/types.h
+++ b/arch/mips/include/asm/types.h
@@ -11,23 +11,7 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
-# include <asm-generic/int-ll64.h>
+#include <asm-generic/int-ll64.h>
#include <uapi/asm/types.h>
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifndef __ASSEMBLY__
-
-/*
- * Don't use phys_t. You've been warned.
- */
-#ifdef CONFIG_64BIT_PHYS_ADDR
-typedef unsigned long long phys_t;
-#else
-typedef unsigned long phys_t;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
#endif /* _ASM_TYPES_H */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 22a5624e2fd2..bf8b32450ef6 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -1325,33 +1325,6 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
return res;
}
-/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-static inline long __strlen_user(const char __user *s)
-{
- long res;
-
- if (segment_eq(get_fs(), get_ds())) {
- __asm__ __volatile__(
- "move\t$4, %1\n\t"
- __MODULE_JAL(__strlen_kernel_nocheck_asm)
- "move\t%0, $2"
- : "=r" (res)
- : "r" (s)
- : "$2", "$4", __UA_t0, "$31");
- } else {
- might_fault();
- __asm__ __volatile__(
- "move\t$4, %1\n\t"
- __MODULE_JAL(__strlen_user_nocheck_asm)
- "move\t%0, $2"
- : "=r" (res)
- : "r" (s)
- : "$2", "$4", __UA_t0, "$31");
- }
-
- return res;
-}
-
/*
* strlen_user: - Get the size of a string in user space.
* @str: The string to measure.
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 708c5d414905..fc1cdd25fcda 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -136,9 +136,11 @@ Ip_u1s2(_lui);
Ip_u2s3u1(_lw);
Ip_u3u1u2(_lwx);
Ip_u1u2u3(_mfc0);
+Ip_u1u2u3(_mfhc0);
Ip_u1(_mfhi);
Ip_u1(_mflo);
Ip_u1u2u3(_mtc0);
+Ip_u1u2u3(_mthc0);
Ip_u3u1u2(_mul);
Ip_u3u1u2(_or);
Ip_u2u1u3(_ori);
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index 4bfdb9d4c186..89c22433b1c6 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -108,9 +108,10 @@ enum rt_op {
*/
enum cop_op {
mfc_op = 0x00, dmfc_op = 0x01,
- cfc_op = 0x02, mfhc_op = 0x03,
- mtc_op = 0x04, dmtc_op = 0x05,
- ctc_op = 0x06, mthc_op = 0x07,
+ cfc_op = 0x02, mfhc0_op = 0x02,
+ mfhc_op = 0x03, mtc_op = 0x04,
+ dmtc_op = 0x05, ctc_op = 0x06,
+ mthc0_op = 0x06, mthc_op = 0x07,
bc_op = 0x08, cop_op = 0x10,
copm_op = 0x18
};
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 76eafcb79c89..ef796f97b996 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -32,7 +32,7 @@ static void __init jz4740_detect_mem(void)
{
void __iomem *jz_emc_base;
u32 ctrl, bus, bank, rows, cols;
- phys_t size;
+ phys_addr_t size;
jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL);
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 008a2fed0584..92987d1bbe5f 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -4,9 +4,10 @@
extra-y := head.o vmlinux.lds
-obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
- prom.o ptrace.o reset.o setup.o signal.o syscall.o \
- time.o topology.o traps.o unaligned.o watch.o vdso.o
+obj-y += cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
+ process.o prom.o ptrace.o reset.o setup.o signal.o \
+ syscall.o time.o topology.o traps.o unaligned.o watch.o \
+ vdso.o
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
@@ -18,12 +19,10 @@ endif
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
-obj-$(CONFIG_CEVT_GIC) += cevt-gic.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
-obj-$(CONFIG_CSRC_GIC) += csrc-gic.o
obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o
obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
@@ -68,7 +67,6 @@ obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o
-obj-$(CONFIG_IRQ_GIC) += irq-gic.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_32BIT) += scall32-o32.o
diff --git a/arch/mips/kernel/cevt-gic.c b/arch/mips/kernel/cevt-gic.c
deleted file mode 100644
index 6093716980b9..000000000000
--- a/arch/mips/kernel/cevt-gic.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-
-#include <asm/time.h>
-#include <asm/gic.h>
-#include <asm/mips-boards/maltaint.h>
-
-DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
-int gic_timer_irq_installed;
-
-
-static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- u64 cnt;
- int res;
-
- cnt = gic_read_count();
- cnt += (u64)delta;
- gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
- res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
- return res;
-}
-
-void gic_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- /* Nothing to do ... */
-}
-
-irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *cd;
- int cpu = smp_processor_id();
-
- gic_write_compare(gic_read_compare());
- cd = &per_cpu(gic_clockevent_device, cpu);
- cd->event_handler(cd);
- return IRQ_HANDLED;
-}
-
-struct irqaction gic_compare_irqaction = {
- .handler = gic_compare_interrupt,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "timer",
-};
-
-
-void gic_event_handler(struct clock_event_device *dev)
-{
-}
-
-int gic_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
- unsigned int irq;
-
- if (!cpu_has_counter || !gic_frequency)
- return -ENXIO;
-
- irq = MIPS_GIC_IRQ_BASE;
-
- cd = &per_cpu(gic_clockevent_device, cpu);
-
- cd->name = "MIPS GIC";
- cd->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_C3STOP;
-
- clockevent_set_clock(cd, gic_frequency);
-
- /* Calculate the min / max delta */
- cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
-
- cd->rating = 300;
- cd->irq = irq;
- cd->cpumask = cpumask_of(cpu);
- cd->set_next_event = gic_next_event;
- cd->set_mode = gic_set_clock_mode;
- cd->event_handler = gic_event_handler;
-
- clockevents_register_device(cd);
-
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP), 0x80000002);
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_SMASK), GIC_VPE_SMASK_CMP_MSK);
-
- if (gic_timer_irq_installed)
- return 0;
-
- gic_timer_irq_installed = 1;
-
- setup_irq(irq, &gic_compare_irqaction);
- irq_set_handler(irq, handle_percpu_irq);
- return 0;
-}
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index bc127e22fdab..6acaad0480af 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -11,10 +11,10 @@
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
#include <asm/time.h>
#include <asm/cevt-r4k.h>
-#include <asm/gic.h>
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
@@ -85,8 +85,8 @@ void mips_event_handler(struct clock_event_device *dev)
*/
static int c0_compare_int_pending(void)
{
-#ifdef CONFIG_IRQ_GIC
- if (cpu_has_veic)
+#ifdef CONFIG_MIPS_GIC
+ if (gic_present)
return gic_get_timer_pending();
#endif
return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index dc49cf30c2db..5342674842f5 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -69,6 +69,63 @@ static int __init htw_disable(char *s)
__setup("nohtw", htw_disable);
+static int mips_ftlb_disabled;
+static int mips_has_ftlb_configured;
+
+static void set_ftlb_enable(struct cpuinfo_mips *c, int enable);
+
+static int __init ftlb_disable(char *s)
+{
+ unsigned int config4, mmuextdef;
+
+ /*
+ * If the core hasn't done any FTLB configuration, there is nothing
+ * for us to do here.
+ */
+ if (!mips_has_ftlb_configured)
+ return 1;
+
+ /* Disable it in the boot cpu */
+ set_ftlb_enable(&cpu_data[0], 0);
+
+ back_to_back_c0_hazard();
+
+ config4 = read_c0_config4();
+
+ /* Check that FTLB has been disabled */
+ mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+ /* MMUSIZEEXT == VTLB ON, FTLB OFF */
+ if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) {
+ /* This should never happen */
+ pr_warn("FTLB could not be disabled!\n");
+ return 1;
+ }
+
+ mips_ftlb_disabled = 1;
+ mips_has_ftlb_configured = 0;
+
+ /*
+ * noftlb is mainly used for debug purposes so print
+ * an informative message instead of using pr_debug()
+ */
+ pr_info("FTLB has been disabled\n");
+
+ /*
+ * Some of these bits are duplicated in the decode_config4.
+ * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case
+ * once FTLB has been disabled so undo what decode_config4 did.
+ */
+ cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways *
+ cpu_data[0].tlbsizeftlbsets;
+ cpu_data[0].tlbsizeftlbsets = 0;
+ cpu_data[0].tlbsizeftlbways = 0;
+
+ return 1;
+}
+
+__setup("noftlb", ftlb_disable);
+
+
static inline void check_errata(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
@@ -140,7 +197,7 @@ static inline unsigned long cpu_get_fpu_id(void)
*/
static inline int __cpu_has_fpu(void)
{
- return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
+ return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
}
static inline unsigned long cpu_get_msa_id(void)
@@ -399,6 +456,8 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
/* fall through */
case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+ if (mips_ftlb_disabled)
+ break;
newcf4 = (config4 & ~ftlb_page) |
(page_size_ftlb(mmuextdef) <<
MIPS_CONF4_FTLBPAGESIZE_SHIFT);
@@ -418,6 +477,7 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
+ mips_has_ftlb_configured = 1;
break;
}
}
@@ -432,7 +492,7 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
unsigned int config5;
config5 = read_c0_config5();
- config5 &= ~MIPS_CONF5_UFR;
+ config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
write_c0_config5(config5);
if (config5 & MIPS_CONF5_EVA)
@@ -453,8 +513,8 @@ static void decode_configs(struct cpuinfo_mips *c)
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- /* Enable FTLB if present */
- set_ftlb_enable(c, 1);
+ /* Enable FTLB if present and not disabled */
+ set_ftlb_enable(c, !mips_ftlb_disabled);
ok = decode_config0(c); /* Read Config registers. */
BUG_ON(!ok); /* Arch spec violation! */
@@ -1058,6 +1118,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
break;
}
case PRID_IMP_BMIPS5000:
+ case PRID_IMP_BMIPS5200:
c->cputype = CPU_BMIPS5000;
__cpu_name[cpu] = "Broadcom BMIPS5000";
set_elf_platform(cpu, "bmips5000");
@@ -1288,6 +1349,8 @@ void cpu_probe(void)
MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
+ if (c->fpu_id & MIPS_FPIR_FREP)
+ c->options |= MIPS_CPU_FRE;
}
}
diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c
index f291cf99b03a..6fe7790e5868 100644
--- a/arch/mips/kernel/crash_dump.c
+++ b/arch/mips/kernel/crash_dump.c
@@ -38,7 +38,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
kunmap_atomic(vaddr);
} else {
if (!kdump_buf_page) {
- pr_warning("Kdump: Kdump buffer page not allocated\n");
+ pr_warn("Kdump: Kdump buffer page not allocated\n");
return -EFAULT;
}
@@ -57,7 +57,7 @@ static int __init kdump_buf_page_init(void)
kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!kdump_buf_page) {
- pr_warning("Kdump: Failed to allocate kdump buffer page\n");
+ pr_warn("Kdump: Failed to allocate kdump buffer page\n");
ret = -ENOMEM;
}
diff --git a/arch/mips/kernel/csrc-gic.c b/arch/mips/kernel/csrc-gic.c
deleted file mode 100644
index e02620901117..000000000000
--- a/arch/mips/kernel/csrc-gic.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/time.h>
-
-#include <asm/gic.h>
-
-static cycle_t gic_hpt_read(struct clocksource *cs)
-{
- return gic_read_count();
-}
-
-static struct clocksource gic_clocksource = {
- .name = "GIC",
- .read = gic_hpt_read,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init gic_clocksource_init(unsigned int frequency)
-{
- unsigned int config, bits;
-
- /* Calculate the clocksource mask. */
- GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), config);
- bits = 32 + ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >>
- (GIC_SH_CONFIG_COUNTBITS_SHF - 2));
-
- /* Set clocksource mask. */
- gic_clocksource.mask = CLOCKSOURCE_MASK(bits);
-
- /* Calculate a somewhat reasonable rating value. */
- gic_clocksource.rating = 200 + frequency / 10000000;
-
- clocksource_register_hz(&gic_clocksource, frequency);
-}
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
new file mode 100644
index 000000000000..c92b15df6893
--- /dev/null
+++ b/arch/mips/kernel/elf.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2014 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/elf.h>
+#include <linux/sched.h>
+
+enum {
+ FP_ERROR = -1,
+ FP_DOUBLE_64A = -2,
+};
+
+int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
+ bool is_interp, struct arch_elf_state *state)
+{
+ struct elfhdr *ehdr = _ehdr;
+ struct elf_phdr *phdr = _phdr;
+ struct mips_elf_abiflags_v0 abiflags;
+ int ret;
+
+ if (config_enabled(CONFIG_64BIT) &&
+ (ehdr->e_ident[EI_CLASS] != ELFCLASS32))
+ return 0;
+ if (phdr->p_type != PT_MIPS_ABIFLAGS)
+ return 0;
+ if (phdr->p_filesz < sizeof(abiflags))
+ return -EINVAL;
+
+ ret = kernel_read(elf, phdr->p_offset, (char *)&abiflags,
+ sizeof(abiflags));
+ if (ret < 0)
+ return ret;
+ if (ret != sizeof(abiflags))
+ return -EIO;
+
+ /* Record the required FP ABIs for use by mips_check_elf */
+ if (is_interp)
+ state->interp_fp_abi = abiflags.fp_abi;
+ else
+ state->fp_abi = abiflags.fp_abi;
+
+ return 0;
+}
+
+static inline unsigned get_fp_abi(struct elfhdr *ehdr, int in_abi)
+{
+ /* If the ABI requirement is provided, simply return that */
+ if (in_abi != -1)
+ return in_abi;
+
+ /* If the EF_MIPS_FP64 flag was set, return MIPS_ABI_FP_64 */
+ if (ehdr->e_flags & EF_MIPS_FP64)
+ return MIPS_ABI_FP_64;
+
+ /* Default to MIPS_ABI_FP_DOUBLE */
+ return MIPS_ABI_FP_DOUBLE;
+}
+
+int arch_check_elf(void *_ehdr, bool has_interpreter,
+ struct arch_elf_state *state)
+{
+ struct elfhdr *ehdr = _ehdr;
+ unsigned fp_abi, interp_fp_abi, abi0, abi1;
+
+ /* Ignore non-O32 binaries */
+ if (config_enabled(CONFIG_64BIT) &&
+ (ehdr->e_ident[EI_CLASS] != ELFCLASS32))
+ return 0;
+
+ fp_abi = get_fp_abi(ehdr, state->fp_abi);
+
+ if (has_interpreter) {
+ interp_fp_abi = get_fp_abi(ehdr, state->interp_fp_abi);
+
+ abi0 = min(fp_abi, interp_fp_abi);
+ abi1 = max(fp_abi, interp_fp_abi);
+ } else {
+ abi0 = abi1 = fp_abi;
+ }
+
+ state->overall_abi = FP_ERROR;
+
+ if (abi0 == abi1) {
+ state->overall_abi = abi0;
+ } else if (abi0 == MIPS_ABI_FP_ANY) {
+ state->overall_abi = abi1;
+ } else if (abi0 == MIPS_ABI_FP_DOUBLE) {
+ switch (abi1) {
+ case MIPS_ABI_FP_XX:
+ state->overall_abi = MIPS_ABI_FP_DOUBLE;
+ break;
+
+ case MIPS_ABI_FP_64A:
+ state->overall_abi = FP_DOUBLE_64A;
+ break;
+ }
+ } else if (abi0 == MIPS_ABI_FP_SINGLE ||
+ abi0 == MIPS_ABI_FP_SOFT) {
+ /* Cannot link with other ABIs */
+ } else if (abi0 == MIPS_ABI_FP_OLD_64) {
+ switch (abi1) {
+ case MIPS_ABI_FP_XX:
+ case MIPS_ABI_FP_64:
+ case MIPS_ABI_FP_64A:
+ state->overall_abi = MIPS_ABI_FP_64;
+ break;
+ }
+ } else if (abi0 == MIPS_ABI_FP_XX ||
+ abi0 == MIPS_ABI_FP_64 ||
+ abi0 == MIPS_ABI_FP_64A) {
+ state->overall_abi = MIPS_ABI_FP_64;
+ }
+
+ switch (state->overall_abi) {
+ case MIPS_ABI_FP_64:
+ case MIPS_ABI_FP_64A:
+ case FP_DOUBLE_64A:
+ if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
+ return -ELIBBAD;
+ break;
+
+ case FP_ERROR:
+ return -ELIBBAD;
+ }
+
+ return 0;
+}
+
+void mips_set_personality_fp(struct arch_elf_state *state)
+{
+ if (config_enabled(CONFIG_FP32XX_HYBRID_FPRS)) {
+ /*
+ * Use hybrid FPRs for all code which can correctly execute
+ * with that mode.
+ */
+ switch (state->overall_abi) {
+ case MIPS_ABI_FP_DOUBLE:
+ case MIPS_ABI_FP_SINGLE:
+ case MIPS_ABI_FP_SOFT:
+ case MIPS_ABI_FP_XX:
+ case MIPS_ABI_FP_ANY:
+ /* FR=1, FRE=1 */
+ clear_thread_flag(TIF_32BIT_FPREGS);
+ set_thread_flag(TIF_HYBRID_FPREGS);
+ return;
+ }
+ }
+
+ switch (state->overall_abi) {
+ case MIPS_ABI_FP_DOUBLE:
+ case MIPS_ABI_FP_SINGLE:
+ case MIPS_ABI_FP_SOFT:
+ /* FR=0 */
+ set_thread_flag(TIF_32BIT_FPREGS);
+ clear_thread_flag(TIF_HYBRID_FPREGS);
+ break;
+
+ case FP_DOUBLE_64A:
+ /* FR=1, FRE=1 */
+ clear_thread_flag(TIF_32BIT_FPREGS);
+ set_thread_flag(TIF_HYBRID_FPREGS);
+ break;
+
+ case MIPS_ABI_FP_64:
+ case MIPS_ABI_FP_64A:
+ /* FR=1, FRE=0 */
+ clear_thread_flag(TIF_32BIT_FPREGS);
+ clear_thread_flag(TIF_HYBRID_FPREGS);
+ break;
+
+ case MIPS_ABI_FP_XX:
+ case MIPS_ABI_FP_ANY:
+ if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
+ set_thread_flag(TIF_32BIT_FPREGS);
+ else
+ clear_thread_flag(TIF_32BIT_FPREGS);
+
+ clear_thread_flag(TIF_HYBRID_FPREGS);
+ break;
+
+ default:
+ case FP_ERROR:
+ BUG();
+ }
+}
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 50b364897dda..a74ec3ae557c 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
@@ -308,6 +309,19 @@ static struct resource pic2_io_resource = {
.flags = IORESOURCE_BUSY
};
+static int i8259A_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &i8259A_chip, handle_level_irq);
+ irq_set_probe(virq);
+ return 0;
+}
+
+static struct irq_domain_ops i8259A_ops = {
+ .map = i8259A_irq_domain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8259
@@ -315,17 +329,17 @@ static struct resource pic2_io_resource = {
*/
void __init init_i8259_irqs(void)
{
- int i;
+ struct irq_domain *domain;
insert_resource(&ioport_resource, &pic1_io_resource);
insert_resource(&ioport_resource, &pic2_io_resource);
init_8259A(0);
- for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++) {
- irq_set_chip_and_handler(i, &i8259A_chip, handle_level_irq);
- irq_set_probe(i);
- }
+ domain = irq_domain_add_legacy(NULL, 16, I8259A_IRQ_BASE, 0,
+ &i8259A_ops, NULL);
+ if (!domain)
+ panic("Failed to add i8259 IRQ domain");
setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
}
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
deleted file mode 100644
index 9e9d8b9a5b97..000000000000
--- a/arch/mips/kernel/irq-gic.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/bitmap.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-
-#include <asm/io.h>
-#include <asm/gic.h>
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <linux/hardirq.h>
-#include <asm-generic/bitops/find.h>
-
-unsigned int gic_frequency;
-unsigned int gic_present;
-unsigned long _gic_base;
-unsigned int gic_irq_base;
-unsigned int gic_irq_flags[GIC_NUM_INTRS];
-
-/* The index into this array is the vector # of the interrupt. */
-struct gic_shared_intr_map gic_shared_intr_map[GIC_NUM_INTRS];
-
-struct gic_pcpu_mask {
- DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
-};
-
-struct gic_pending_regs {
- DECLARE_BITMAP(pending, GIC_NUM_INTRS);
-};
-
-struct gic_intrmask_regs {
- DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
-};
-
-static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
-static struct gic_pending_regs pending_regs[NR_CPUS];
-static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
-
-#if defined(CONFIG_CSRC_GIC) || defined(CONFIG_CEVT_GIC)
-cycle_t gic_read_count(void)
-{
- unsigned int hi, hi2, lo;
-
- do {
- GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi);
- GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), lo);
- GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi2);
- } while (hi2 != hi);
-
- return (((cycle_t) hi) << 32) + lo;
-}
-
-void gic_write_compare(cycle_t cnt)
-{
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI),
- (int)(cnt >> 32));
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO),
- (int)(cnt & 0xffffffff));
-}
-
-void gic_write_cpu_compare(cycle_t cnt, int cpu)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), cpu);
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_HI),
- (int)(cnt >> 32));
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_LO),
- (int)(cnt & 0xffffffff));
-
- local_irq_restore(flags);
-}
-
-cycle_t gic_read_compare(void)
-{
- unsigned int hi, lo;
-
- GICREAD(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI), hi);
- GICREAD(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO), lo);
-
- return (((cycle_t) hi) << 32) + lo;
-}
-#endif
-
-unsigned int gic_get_timer_pending(void)
-{
- unsigned int vpe_pending;
-
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
- GICREAD(GIC_REG(VPE_OTHER, GIC_VPE_PEND), vpe_pending);
- return (vpe_pending & GIC_VPE_PEND_TIMER_MSK);
-}
-
-void gic_bind_eic_interrupt(int irq, int set)
-{
- /* Convert irq vector # to hw int # */
- irq -= GIC_PIN_TO_VEC_OFFSET;
-
- /* Set irq to use shadow set */
- GICWRITE(GIC_REG_ADDR(VPE_LOCAL, GIC_VPE_EIC_SS(irq)), set);
-}
-
-void gic_send_ipi(unsigned int intr)
-{
- GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr);
-}
-
-static void gic_eic_irq_dispatch(void)
-{
- unsigned int cause = read_c0_cause();
- int irq;
-
- irq = (cause & ST0_IM) >> STATUSB_IP2;
- if (irq == 0)
- irq = -1;
-
- if (irq >= 0)
- do_IRQ(gic_irq_base + irq);
- else
- spurious_interrupt();
-}
-
-static void __init vpe_local_setup(unsigned int numvpes)
-{
- unsigned long timer_intr = GIC_INT_TMR;
- unsigned long perf_intr = GIC_INT_PERFCTR;
- unsigned int vpe_ctl;
- int i;
-
- if (cpu_has_veic) {
- /*
- * GIC timer interrupt -> CPU HW Int X (vector X+2) ->
- * map to pin X+2-1 (since GIC adds 1)
- */
- timer_intr += (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
- /*
- * GIC perfcnt interrupt -> CPU HW Int X (vector X+2) ->
- * map to pin X+2-1 (since GIC adds 1)
- */
- perf_intr += (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
- }
-
- /*
- * Setup the default performance counter timer interrupts
- * for all VPEs
- */
- for (i = 0; i < numvpes; i++) {
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
-
- /* Are Interrupts locally routable? */
- GICREAD(GIC_REG(VPE_OTHER, GIC_VPE_CTL), vpe_ctl);
- if (vpe_ctl & GIC_VPE_CTL_TIMER_RTBL_MSK)
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_TIMER_MAP),
- GIC_MAP_TO_PIN_MSK | timer_intr);
- if (cpu_has_veic) {
- set_vi_handler(timer_intr + GIC_PIN_TO_VEC_OFFSET,
- gic_eic_irq_dispatch);
- gic_shared_intr_map[timer_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_TIMER_MSK;
- }
-
- if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK)
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP),
- GIC_MAP_TO_PIN_MSK | perf_intr);
- if (cpu_has_veic) {
- set_vi_handler(perf_intr + GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch);
- gic_shared_intr_map[perf_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_PERFCNT_MSK;
- }
- }
-}
-
-unsigned int gic_compare_int(void)
-{
- unsigned int pending;
-
- GICREAD(GIC_REG(VPE_LOCAL, GIC_VPE_PEND), pending);
- if (pending & GIC_VPE_PEND_CMP_MSK)
- return 1;
- else
- return 0;
-}
-
-void gic_get_int_mask(unsigned long *dst, const unsigned long *src)
-{
- unsigned int i;
- unsigned long *pending, *intrmask, *pcpu_mask;
- unsigned long *pending_abs, *intrmask_abs;
-
- /* Get per-cpu bitmaps */
- pending = pending_regs[smp_processor_id()].pending;
- intrmask = intrmask_regs[smp_processor_id()].intrmask;
- pcpu_mask = pcpu_masks[smp_processor_id()].pcpu_mask;
-
- pending_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED,
- GIC_SH_PEND_31_0_OFS);
- intrmask_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED,
- GIC_SH_MASK_31_0_OFS);
-
- for (i = 0; i < BITS_TO_LONGS(GIC_NUM_INTRS); i++) {
- GICREAD(*pending_abs, pending[i]);
- GICREAD(*intrmask_abs, intrmask[i]);
- pending_abs++;
- intrmask_abs++;
- }
-
- bitmap_and(pending, pending, intrmask, GIC_NUM_INTRS);
- bitmap_and(pending, pending, pcpu_mask, GIC_NUM_INTRS);
- bitmap_and(dst, src, pending, GIC_NUM_INTRS);
-}
-
-unsigned int gic_get_int(void)
-{
- DECLARE_BITMAP(interrupts, GIC_NUM_INTRS);
-
- bitmap_fill(interrupts, GIC_NUM_INTRS);
- gic_get_int_mask(interrupts, interrupts);
-
- return find_first_bit(interrupts, GIC_NUM_INTRS);
-}
-
-static void gic_mask_irq(struct irq_data *d)
-{
- GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
-}
-
-static void gic_unmask_irq(struct irq_data *d)
-{
- GIC_SET_INTR_MASK(d->irq - gic_irq_base);
-}
-
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(gic_lock);
-
-static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
- bool force)
-{
- unsigned int irq = (d->irq - gic_irq_base);
- cpumask_t tmp = CPU_MASK_NONE;
- unsigned long flags;
- int i;
-
- cpumask_and(&tmp, cpumask, cpu_online_mask);
- if (cpus_empty(tmp))
- return -1;
-
- /* Assumption : cpumask refers to a single CPU */
- spin_lock_irqsave(&gic_lock, flags);
-
- /* Re-route this IRQ */
- GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
-
- /* Update the pcpu_masks */
- for (i = 0; i < NR_CPUS; i++)
- clear_bit(irq, pcpu_masks[i].pcpu_mask);
- set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
-
- cpumask_copy(d->affinity, cpumask);
- spin_unlock_irqrestore(&gic_lock, flags);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif
-
-static struct irq_chip gic_irq_controller = {
- .name = "MIPS GIC",
- .irq_ack = gic_irq_ack,
- .irq_mask = gic_mask_irq,
- .irq_mask_ack = gic_mask_irq,
- .irq_unmask = gic_unmask_irq,
- .irq_eoi = gic_finish_irq,
-#ifdef CONFIG_SMP
- .irq_set_affinity = gic_set_affinity,
-#endif
-};
-
-static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
- unsigned int pin, unsigned int polarity, unsigned int trigtype,
- unsigned int flags)
-{
- struct gic_shared_intr_map *map_ptr;
-
- /* Setup Intr to Pin mapping */
- if (pin & GIC_MAP_TO_NMI_MSK) {
- int i;
-
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
- /* FIXME: hack to route NMI to all cpu's */
- for (i = 0; i < NR_CPUS; i += 32) {
- GICWRITE(GIC_REG_ADDR(SHARED,
- GIC_SH_MAP_TO_VPE_REG_OFF(intr, i)),
- 0xffffffff);
- }
- } else {
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)),
- GIC_MAP_TO_PIN_MSK | pin);
- /* Setup Intr to CPU mapping */
- GIC_SH_MAP_TO_VPE_SMASK(intr, cpu);
- if (cpu_has_veic) {
- set_vi_handler(pin + GIC_PIN_TO_VEC_OFFSET,
- gic_eic_irq_dispatch);
- map_ptr = &gic_shared_intr_map[pin + GIC_PIN_TO_VEC_OFFSET];
- if (map_ptr->num_shared_intr >= GIC_MAX_SHARED_INTR)
- BUG();
- map_ptr->intr_list[map_ptr->num_shared_intr++] = intr;
- }
- }
-
- /* Setup Intr Polarity */
- GIC_SET_POLARITY(intr, polarity);
-
- /* Setup Intr Trigger Type */
- GIC_SET_TRIGGER(intr, trigtype);
-
- /* Init Intr Masks */
- GIC_CLR_INTR_MASK(intr);
-
- /* Initialise per-cpu Interrupt software masks */
- set_bit(intr, pcpu_masks[cpu].pcpu_mask);
-
- if ((flags & GIC_FLAG_TRANSPARENT) && (cpu_has_veic == 0))
- GIC_SET_INTR_MASK(intr);
- if (trigtype == GIC_TRIG_EDGE)
- gic_irq_flags[intr] |= GIC_TRIG_EDGE;
-}
-
-static void __init gic_basic_init(int numintrs, int numvpes,
- struct gic_intr_map *intrmap, int mapsize)
-{
- unsigned int i, cpu;
- unsigned int pin_offset = 0;
-
- board_bind_eic_interrupt = &gic_bind_eic_interrupt;
-
- /* Setup defaults */
- for (i = 0; i < numintrs; i++) {
- GIC_SET_POLARITY(i, GIC_POL_POS);
- GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL);
- GIC_CLR_INTR_MASK(i);
- if (i < GIC_NUM_INTRS) {
- gic_irq_flags[i] = 0;
- gic_shared_intr_map[i].num_shared_intr = 0;
- gic_shared_intr_map[i].local_intr_mask = 0;
- }
- }
-
- /*
- * In EIC mode, the HW_INT# is offset by (2-1). Need to subtract
- * one because the GIC will add one (since 0=no intr).
- */
- if (cpu_has_veic)
- pin_offset = (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
-
- /* Setup specifics */
- for (i = 0; i < mapsize; i++) {
- cpu = intrmap[i].cpunum;
- if (cpu == GIC_UNUSED)
- continue;
- gic_setup_intr(i,
- intrmap[i].cpunum,
- intrmap[i].pin + pin_offset,
- intrmap[i].polarity,
- intrmap[i].trigtype,
- intrmap[i].flags);
- }
-
- vpe_local_setup(numvpes);
-}
-
-void __init gic_init(unsigned long gic_base_addr,
- unsigned long gic_addrspace_size,
- struct gic_intr_map *intr_map, unsigned int intr_map_size,
- unsigned int irqbase)
-{
- unsigned int gicconfig;
- int numvpes, numintrs;
-
- _gic_base = (unsigned long) ioremap_nocache(gic_base_addr,
- gic_addrspace_size);
- gic_irq_base = irqbase;
-
- GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
- numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >>
- GIC_SH_CONFIG_NUMINTRS_SHF;
- numintrs = ((numintrs + 1) * 8);
-
- numvpes = (gicconfig & GIC_SH_CONFIG_NUMVPES_MSK) >>
- GIC_SH_CONFIG_NUMVPES_SHF;
- numvpes = numvpes + 1;
-
- gic_basic_init(numintrs, numvpes, intr_map, intr_map_size);
-
- gic_platform_init(numintrs, &gic_irq_controller);
-}
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index e498f2b3646a..590c2c980fd3 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -36,6 +36,7 @@
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
+#include <asm/setup.h>
static inline void unmask_mips_irq(struct irq_data *d)
{
@@ -94,28 +95,24 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
.irq_eoi = unmask_mips_irq,
};
-void __init mips_cpu_irq_init(void)
+asmlinkage void __weak plat_irq_dispatch(void)
{
- int irq_base = MIPS_CPU_IRQ_BASE;
- int i;
+ unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
+ int irq;
- /* Mask interrupts. */
- clear_c0_status(ST0_IM);
- clear_c0_cause(CAUSEF_IP);
-
- /* Software interrupts are used for MT/CMT IPI */
- for (i = irq_base; i < irq_base + 2; i++)
- irq_set_chip_and_handler(i, cpu_has_mipsmt ?
- &mips_mt_cpu_irq_controller :
- &mips_cpu_irq_controller,
- handle_percpu_irq);
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
- for (i = irq_base + 2; i < irq_base + 8; i++)
- irq_set_chip_and_handler(i, &mips_cpu_irq_controller,
- handle_percpu_irq);
+ pending >>= CAUSEB_IP;
+ while (pending) {
+ irq = fls(pending) - 1;
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ pending &= ~BIT(irq);
+ }
}
-#ifdef CONFIG_IRQ_DOMAIN
static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
@@ -128,6 +125,9 @@ static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
chip = &mips_cpu_irq_controller;
}
+ if (cpu_has_vint)
+ set_vi_handler(hw, plat_irq_dispatch);
+
irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
return 0;
@@ -138,8 +138,7 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
-int __init mips_cpu_intc_init(struct device_node *of_node,
- struct device_node *parent)
+static void __init __mips_cpu_irq_init(struct device_node *of_node)
{
struct irq_domain *domain;
@@ -151,7 +150,16 @@ int __init mips_cpu_intc_init(struct device_node *of_node,
&mips_cpu_intc_irq_domain_ops, NULL);
if (!domain)
panic("Failed to add irqdomain for MIPS CPU");
+}
+void __init mips_cpu_irq_init(void)
+{
+ __mips_cpu_irq_init(NULL);
+}
+
+int __init mips_cpu_irq_of_init(struct device_node *of_node,
+ struct device_node *parent)
+{
+ __mips_cpu_irq_init(of_node);
return 0;
}
-#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index f76f7a08412d..85bbe9b96759 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -16,7 +16,7 @@
void __iomem *mips_cm_base;
void __iomem *mips_cm_l2sync_base;
-phys_t __mips_cm_phys_base(void)
+phys_addr_t __mips_cm_phys_base(void)
{
u32 config3 = read_c0_config3();
u32 cmgcr;
@@ -30,10 +30,10 @@ phys_t __mips_cm_phys_base(void)
return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
}
-phys_t mips_cm_phys_base(void)
+phys_addr_t mips_cm_phys_base(void)
__attribute__((weak, alias("__mips_cm_phys_base")));
-phys_t __mips_cm_l2sync_phys_base(void)
+phys_addr_t __mips_cm_l2sync_phys_base(void)
{
u32 base_reg;
@@ -49,13 +49,13 @@ phys_t __mips_cm_l2sync_phys_base(void)
return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
}
-phys_t mips_cm_l2sync_phys_base(void)
+phys_addr_t mips_cm_l2sync_phys_base(void)
__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
static void mips_cm_probe_l2sync(void)
{
unsigned major_rev;
- phys_t addr;
+ phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >>
@@ -78,7 +78,7 @@ static void mips_cm_probe_l2sync(void)
int mips_cm_probe(void)
{
- phys_t addr;
+ phys_addr_t addr;
u32 base_reg;
addr = mips_cm_phys_base();
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index ba473608a347..11964501c4b0 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -21,7 +21,7 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
-phys_t __weak mips_cpc_phys_base(void)
+phys_addr_t __weak mips_cpc_phys_base(void)
{
u32 cpc_base;
@@ -44,7 +44,7 @@ phys_t __weak mips_cpc_phys_base(void)
int mips_cpc_probe(void)
{
- phys_t addr;
+ phys_addr_t addr;
unsigned cpu;
for_each_possible_cpu(cpu)
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 2607c3a4ff7e..17eaf0cf760c 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -24,9 +24,7 @@ extern long __strncpy_from_user_nocheck_asm(char *__to,
const char *__from, long __len);
extern long __strncpy_from_user_asm(char *__to, const char *__from,
long __len);
-extern long __strlen_kernel_nocheck_asm(const char *s);
extern long __strlen_kernel_asm(const char *s);
-extern long __strlen_user_nocheck_asm(const char *s);
extern long __strlen_user_asm(const char *s);
extern long __strnlen_kernel_nocheck_asm(const char *s);
extern long __strnlen_kernel_asm(const char *s);
@@ -62,9 +60,7 @@ EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm);
EXPORT_SYMBOL(__strncpy_from_kernel_asm);
EXPORT_SYMBOL(__strncpy_from_user_nocheck_asm);
EXPORT_SYMBOL(__strncpy_from_user_asm);
-EXPORT_SYMBOL(__strlen_kernel_nocheck_asm);
EXPORT_SYMBOL(__strlen_kernel_asm);
-EXPORT_SYMBOL(__strlen_user_nocheck_asm);
EXPORT_SYMBOL(__strlen_user_asm);
EXPORT_SYMBOL(__strnlen_kernel_nocheck_asm);
EXPORT_SYMBOL(__strnlen_kernel_asm);
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index a8f9cdc6f8b0..9466184d0039 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -561,8 +561,8 @@ static int mipspmu_get_irq(void)
IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD,
"mips_perf_pmu", NULL);
if (err) {
- pr_warning("Unable to request IRQ%d for MIPS "
- "performance counters!\n", mipspmu.irq);
+ pr_warn("Unable to request IRQ%d for MIPS performance counters!\n",
+ mipspmu.irq);
}
} else if (cp0_perfcount_irq < 0) {
/*
@@ -572,8 +572,7 @@ static int mipspmu_get_irq(void)
perf_irq = mipsxx_pmu_handle_shared_irq;
err = 0;
} else {
- pr_warning("The platform hasn't properly defined its "
- "interrupt controller.\n");
+ pr_warn("The platform hasn't properly defined its interrupt controller\n");
err = -ENOENT;
}
@@ -1614,22 +1613,13 @@ init_hw_perf_events(void)
counters = counters_total_to_per_cpu(counters);
#endif
-#ifdef MSC01E_INT_BASE
- if (cpu_has_veic) {
- /*
- * Using platform specific interrupt controller defines.
- */
- irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
- } else {
-#endif
- if ((cp0_perfcount_irq >= 0) &&
- (cp0_compare_irq != cp0_perfcount_irq))
- irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- else
- irq = -1;
-#ifdef MSC01E_INT_BASE
- }
-#endif
+ if (get_c0_perfcount_int)
+ irq = get_c0_perfcount_int();
+ else if ((cp0_perfcount_irq >= 0) &&
+ (cp0_compare_irq != cp0_perfcount_irq))
+ irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ irq = -1;
mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 636b0745d7c7..eb76434828e8 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -42,6 +42,7 @@
#include <asm/isadep.h>
#include <asm/inst.h>
#include <asm/stacktrace.h>
+#include <asm/irq_regs.h>
#ifdef CONFIG_HOTPLUG_CPU
void arch_cpu_idle_dead(void)
@@ -187,21 +188,21 @@ static inline int is_ra_save_ins(union mips_instruction *ip)
*/
if (mm_insn_16bit(ip->halfword[0])) {
mmi.word = (ip->halfword[0] << 16);
- return ((mmi.mm16_r5_format.opcode == mm_swsp16_op &&
- mmi.mm16_r5_format.rt == 31) ||
- (mmi.mm16_m_format.opcode == mm_pool16c_op &&
- mmi.mm16_m_format.func == mm_swm16_op));
+ return (mmi.mm16_r5_format.opcode == mm_swsp16_op &&
+ mmi.mm16_r5_format.rt == 31) ||
+ (mmi.mm16_m_format.opcode == mm_pool16c_op &&
+ mmi.mm16_m_format.func == mm_swm16_op);
}
else {
mmi.halfword[0] = ip->halfword[1];
mmi.halfword[1] = ip->halfword[0];
- return ((mmi.mm_m_format.opcode == mm_pool32b_op &&
- mmi.mm_m_format.rd > 9 &&
- mmi.mm_m_format.base == 29 &&
- mmi.mm_m_format.func == mm_swm32_func) ||
- (mmi.i_format.opcode == mm_sw32_op &&
- mmi.i_format.rs == 29 &&
- mmi.i_format.rt == 31));
+ return (mmi.mm_m_format.opcode == mm_pool32b_op &&
+ mmi.mm_m_format.rd > 9 &&
+ mmi.mm_m_format.base == 29 &&
+ mmi.mm_m_format.func == mm_swm32_func) ||
+ (mmi.i_format.opcode == mm_sw32_op &&
+ mmi.i_format.rs == 29 &&
+ mmi.i_format.rt == 31);
}
#else
/* sw / sd $ra, offset($sp) */
@@ -233,7 +234,7 @@ static inline int is_jump_ins(union mips_instruction *ip)
if (ip->r_format.opcode != mm_pool32a_op ||
ip->r_format.func != mm_pool32axf_op)
return 0;
- return (((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op);
+ return ((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op;
#else
if (ip->j_format.opcode == j_op)
return 1;
@@ -260,13 +261,13 @@ static inline int is_sp_move_ins(union mips_instruction *ip)
union mips_instruction mmi;
mmi.word = (ip->halfword[0] << 16);
- return ((mmi.mm16_r3_format.opcode == mm_pool16d_op &&
- mmi.mm16_r3_format.simmediate && mm_addiusp_func) ||
- (mmi.mm16_r5_format.opcode == mm_pool16d_op &&
- mmi.mm16_r5_format.rt == 29));
+ return (mmi.mm16_r3_format.opcode == mm_pool16d_op &&
+ mmi.mm16_r3_format.simmediate && mm_addiusp_func) ||
+ (mmi.mm16_r5_format.opcode == mm_pool16d_op &&
+ mmi.mm16_r5_format.rt == 29);
}
- return (ip->mm_i_format.opcode == mm_addiu32_op &&
- ip->mm_i_format.rt == 29 && ip->mm_i_format.rs == 29);
+ return ip->mm_i_format.opcode == mm_addiu32_op &&
+ ip->mm_i_format.rt == 29 && ip->mm_i_format.rs == 29;
#else
/* addiu/daddiu sp,sp,-imm */
if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
@@ -532,3 +533,20 @@ unsigned long arch_align_stack(unsigned long sp)
return sp & ALMASK;
}
+
+static void arch_dump_stack(void *info)
+{
+ struct pt_regs *regs;
+
+ regs = get_irq_regs();
+
+ if (regs)
+ show_regs(regs);
+
+ dump_stack();
+}
+
+void arch_trigger_all_cpu_backtrace(bool include_self)
+{
+ smp_call_function(arch_dump_stack, NULL, 1);
+}
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 5d39bb85bf35..452d4350ce42 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -16,6 +16,7 @@
#include <linux/debugfs.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
#include <asm/page.h>
#include <asm/prom.h>
@@ -54,4 +55,21 @@ void __init __dt_setup_arch(void *bph)
mips_set_machine_name(of_flat_dt_get_machine_name());
}
+
+int __init __dt_register_buses(const char *bus0, const char *bus1)
+{
+ static struct of_device_id of_ids[3];
+
+ if (!of_have_populated_dt())
+ panic("device tree not present");
+
+ strlcpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible));
+ strlcpy(of_ids[1].compatible, bus1, sizeof(of_ids[1].compatible));
+
+ if (of_platform_populate(NULL, of_ids, NULL, NULL))
+ panic("failed to populate DT");
+
+ return 0;
+}
+
#endif
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index f3b635f86c39..a8c20afeb813 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -82,14 +82,14 @@ static struct resource data_resource = { .name = "Kernel data", };
static void *detect_magic __initdata = detect_memory_region;
-void __init add_memory_region(phys_t start, phys_t size, long type)
+void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
{
int x = boot_mem_map.nr_map;
int i;
/* Sanity check */
if (start + size < start) {
- pr_warning("Trying to add an invalid memory region, skipped\n");
+ pr_warn("Trying to add an invalid memory region, skipped\n");
return;
}
@@ -127,10 +127,10 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
boot_mem_map.nr_map++;
}
-void __init detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max)
+void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
{
void *dm = &detect_magic;
- phys_t size;
+ phys_addr_t size;
for (size = sz_min; size < sz_max; size <<= 1) {
if (!memcmp(dm, dm + size, sizeof(detect_magic)))
@@ -545,9 +545,9 @@ static int __init early_parse_elfcorehdr(char *p)
early_param("elfcorehdr", early_parse_elfcorehdr);
#endif
-static void __init arch_mem_addpart(phys_t mem, phys_t end, int type)
+static void __init arch_mem_addpart(phys_addr_t mem, phys_addr_t end, int type)
{
- phys_t size;
+ phys_addr_t size;
int i;
size = end - mem;
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 16f1e4f2bf3c..545bf11bd2ed 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -530,7 +530,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
struct mips_abi *abi = current->thread.abi;
#ifdef CONFIG_CPU_MICROMIPS
void *vdso;
- unsigned int tmp = (unsigned int)current->mm->context.vdso;
+ unsigned long tmp = (unsigned long)current->mm->context.vdso;
set_isa16_mode(tmp);
vdso = (void *)tmp;
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 06bb5ed6d80a..b8bd9340c9c7 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -35,6 +35,7 @@
#include <asm/bmips.h>
#include <asm/traps.h>
#include <asm/barrier.h>
+#include <asm/cpu-features.h>
static int __maybe_unused max_cpus = 1;
@@ -42,6 +43,12 @@ static int __maybe_unused max_cpus = 1;
int bmips_smp_enabled = 1;
int bmips_cpu_offset;
cpumask_t bmips_booted_mask;
+unsigned long bmips_tp1_irqs = IE_IRQ1;
+
+#define RESET_FROM_KSEG0 0x80080800
+#define RESET_FROM_KSEG1 0xa0080800
+
+static void bmips_set_reset_vec(int cpu, u32 val);
#ifdef CONFIG_SMP
@@ -194,6 +201,9 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
pr_info("SMP: Booting CPU%d...\n", cpu);
if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
+ /* kseg1 might not exist if this CPU enabled XKS01 */
+ bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);
+
switch (current_cpu_type()) {
case CPU_BMIPS4350:
case CPU_BMIPS4380:
@@ -203,8 +213,9 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
bmips5000_send_ipi_single(cpu, 0);
break;
}
- }
- else {
+ } else {
+ bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);
+
switch (current_cpu_type()) {
case CPU_BMIPS4350:
case CPU_BMIPS4380:
@@ -213,17 +224,7 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
set_c0_brcm_cmt_ctrl(0x01);
break;
case CPU_BMIPS5000:
- if (cpu & 0x01)
- write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
- else {
- /*
- * core N thread 0 was already booted; just
- * pulse the NMI line
- */
- bmips_write_zscm_reg(0x210, 0xc0000000);
- udelay(10);
- bmips_write_zscm_reg(0x210, 0x00);
- }
+ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
break;
}
cpumask_set_cpu(cpu, &bmips_booted_mask);
@@ -235,31 +236,12 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
*/
static void bmips_init_secondary(void)
{
- /* move NMI vector to kseg0, in case XKS01 is enabled */
-
- void __iomem *cbr;
- unsigned long old_vec;
- unsigned long relo_vector;
- int boot_cpu;
-
switch (current_cpu_type()) {
case CPU_BMIPS4350:
case CPU_BMIPS4380:
- cbr = BMIPS_GET_CBR();
-
- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
- relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
- BMIPS_RELO_VECTOR_CONTROL_1;
-
- old_vec = __raw_readl(cbr + relo_vector);
- __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
-
clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
break;
case CPU_BMIPS5000:
- write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
-
write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
break;
}
@@ -276,7 +258,7 @@ static void bmips_smp_finish(void)
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
irq_enable_hazard();
- set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+ set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
irq_enable_hazard();
}
@@ -381,6 +363,7 @@ static int bmips_cpu_disable(void)
set_cpu_online(cpu, false);
cpu_clear(cpu, cpu_callin_map);
+ clear_c0_status(IE_IRQ5);
local_flush_tlb_all();
local_flush_icache_range(0, ~0);
@@ -405,7 +388,8 @@ void __ref play_dead(void)
* IRQ handlers; this clears ST0_IE and returns immediately.
*/
clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
- change_c0_status(IE_IRQ5 | IE_IRQ1 | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
+ change_c0_status(
+ IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
irq_disable_hazard();
@@ -473,10 +457,61 @@ static inline void bmips_nmi_handler_setup(void)
&bmips_smp_int_vec_end);
}
+struct reset_vec_info {
+ int cpu;
+ u32 val;
+};
+
+static void bmips_set_reset_vec_remote(void *vinfo)
+{
+ struct reset_vec_info *info = vinfo;
+ int shift = info->cpu & 0x01 ? 16 : 0;
+ u32 mask = ~(0xffff << shift), val = info->val >> 16;
+
+ preempt_disable();
+ if (smp_processor_id() > 0) {
+ smp_call_function_single(0, &bmips_set_reset_vec_remote,
+ info, 1);
+ } else {
+ if (info->cpu & 0x02) {
+ /* BMIPS5200 "should" use mask/shift, but it's buggy */
+ bmips_write_zscm_reg(0xa0, (val << 16) | val);
+ bmips_read_zscm_reg(0xa0);
+ } else {
+ write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
+ (val << shift));
+ }
+ }
+ preempt_enable();
+}
+
+static void bmips_set_reset_vec(int cpu, u32 val)
+{
+ struct reset_vec_info info;
+
+ if (current_cpu_type() == CPU_BMIPS5000) {
+ /* this needs to run from CPU0 (which is always online) */
+ info.cpu = cpu;
+ info.val = val;
+ bmips_set_reset_vec_remote(&info);
+ } else {
+ void __iomem *cbr = BMIPS_GET_CBR();
+
+ if (cpu == 0)
+ __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
+ else {
+ if (current_cpu_type() != CPU_BMIPS4380)
+ return;
+ __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ }
+ }
+ __sync();
+ back_to_back_c0_hazard();
+}
+
void bmips_ebase_setup(void)
{
unsigned long new_ebase = ebase;
- void __iomem __maybe_unused *cbr;
BUG_ON(ebase != CKSEG0);
@@ -496,15 +531,14 @@ void bmips_ebase_setup(void)
&bmips_smp_int_vec, 0x80);
__sync();
return;
+ case CPU_BMIPS3300:
case CPU_BMIPS4380:
/*
* 0x8000_0000: reset/NMI (initially in kseg1)
* 0x8000_0400: normal vectors
*/
new_ebase = 0x80000400;
- cbr = BMIPS_GET_CBR();
- __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
- __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+ bmips_set_reset_vec(0, RESET_FROM_KSEG0);
break;
case CPU_BMIPS5000:
/*
@@ -512,10 +546,8 @@ void bmips_ebase_setup(void)
* 0x8000_1000: normal vectors
*/
new_ebase = 0x80001000;
- write_c0_brcm_bootvec(0xa0088008);
+ bmips_set_reset_vec(0, RESET_FROM_KSEG0);
write_c0_ebase(new_ebase);
- if (max_cpus > 2)
- bmips_write_zscm_reg(0xa0, 0xa008a008);
break;
default:
return;
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index fc8a51553426..1e0a93c5a3e7 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -24,6 +24,7 @@
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/compiler.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/atomic.h>
#include <asm/cacheflush.h>
@@ -37,7 +38,6 @@
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
#include <asm/amon.h>
-#include <asm/gic.h>
static void cmp_init_secondary(void)
{
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index e6e16a1d4add..bed7590e475f 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -9,13 +9,13 @@
*/
#include <linux/io.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/types.h>
#include <asm/bcache.h>
-#include <asm/gic.h>
#include <asm/mips-cm.h>
#include <asm/mips-cpc.h>
#include <asm/mips_mt.h>
@@ -273,8 +273,8 @@ static void cps_init_secondary(void)
if (cpu_has_mipsmt)
dmt();
- change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
- STATUSF_IP6 | STATUSF_IP7);
+ change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
+ STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
}
static void cps_smp_finish(void)
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
index 3b21a96d1ccb..5f0ab5bcd01e 100644
--- a/arch/mips/kernel/smp-gic.c
+++ b/arch/mips/kernel/smp-gic.c
@@ -12,9 +12,9 @@
* option) any later version.
*/
+#include <linux/irqchip/mips-gic.h>
#include <linux/printk.h>
-#include <asm/gic.h>
#include <asm/mips-cpc.h>
#include <asm/smp-ops.h>
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 21f23add04f4..ad86951b73bd 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -21,6 +21,7 @@
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/compiler.h>
#include <linux/smp.h>
@@ -34,7 +35,6 @@
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-#include <asm/gic.h>
static void __init smvp_copy_vpe_config(void)
{
@@ -119,7 +119,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
unsigned long flags;
int vpflags;
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present) {
gic_send_ipi_single(cpu, action);
return;
@@ -158,7 +158,7 @@ static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
static void vsmp_init_secondary(void)
{
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
/* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 4a4f9dda5658..604b558809c4 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -117,6 +117,7 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
"2: sc %[tmp], (%[addr]) \n"
" beqzl %[tmp], 1b \n"
"3: \n"
+ " .insn \n"
" .section .fixup,\"ax\" \n"
"4: li %[err], %[efault] \n"
" j 3b \n"
@@ -142,6 +143,7 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
"2: sc %[tmp], (%[addr]) \n"
" bnez %[tmp], 4f \n"
"3: \n"
+ " .insn \n"
" .subsection 2 \n"
"4: b 1b \n"
" .previous \n"
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 22b19c275044..ad3d2031c327 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -724,6 +724,50 @@ int process_fpemu_return(int sig, void __user *fault_addr)
}
}
+static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
+ unsigned long old_epc, unsigned long old_ra)
+{
+ union mips_instruction inst = { .word = opcode };
+ void __user *fault_addr = NULL;
+ int sig;
+
+ /* If it's obviously not an FP instruction, skip it */
+ switch (inst.i_format.opcode) {
+ case cop1_op:
+ case cop1x_op:
+ case lwc1_op:
+ case ldc1_op:
+ case swc1_op:
+ case sdc1_op:
+ break;
+
+ default:
+ return -1;
+ }
+
+ /*
+ * do_ri skipped over the instruction via compute_return_epc, undo
+ * that for the FPU emulator.
+ */
+ regs->cp0_epc = old_epc;
+ regs->regs[31] = old_ra;
+
+ /* Save the FP context to struct thread_struct */
+ lose_fpu(1);
+
+ /* Run the emulator */
+ sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+ &fault_addr);
+
+ /* If something went wrong, signal */
+ process_fpemu_return(sig, fault_addr);
+
+ /* Restore the hardware register state */
+ own_fpu(1);
+
+ return 0;
+}
+
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
@@ -1016,6 +1060,9 @@ asmlinkage void do_ri(struct pt_regs *regs)
if (status < 0)
status = simulate_sync(regs, opcode);
+
+ if (status < 0)
+ status = simulate_fp(regs, opcode, old_epc, old31);
}
if (status < 0)
@@ -1380,12 +1427,19 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
show_regs(regs);
if (multi_match) {
- printk("Index : %0x\n", read_c0_index());
- printk("Pagemask: %0x\n", read_c0_pagemask());
- printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
- printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
- printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
- printk("\n");
+ pr_err("Index : %0x\n", read_c0_index());
+ pr_err("Pagemask: %0x\n", read_c0_pagemask());
+ pr_err("EntryHi : %0*lx\n", field, read_c0_entryhi());
+ pr_err("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+ pr_err("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+ pr_err("Wired : %0x\n", read_c0_wired());
+ pr_err("Pagegrain: %0x\n", read_c0_pagegrain());
+ if (cpu_has_htw) {
+ pr_err("PWField : %0*lx\n", field, read_c0_pwfield());
+ pr_err("PWSize : %0*lx\n", field, read_c0_pwsize());
+ pr_err("PWCtl : %0x\n", read_c0_pwctl());
+ }
+ pr_err("\n");
dump_tlb_all();
}
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index 0f1af58b036a..ed2a278722a9 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -16,9 +16,11 @@
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/unistd.h>
+#include <linux/random.h>
#include <asm/vdso.h>
#include <asm/uasm.h>
+#include <asm/processor.h>
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
@@ -67,7 +69,18 @@ subsys_initcall(init_vdso);
static unsigned long vdso_addr(unsigned long start)
{
- return STACK_TOP;
+ unsigned long offset = 0UL;
+
+ if (current->flags & PF_RANDOMIZE) {
+ offset = get_random_int();
+ offset <<= PAGE_SHIFT;
+ if (TASK_IS_32BIT_ADDR)
+ offset &= 0xfffffful;
+ else
+ offset &= 0xffffffful;
+ }
+
+ return STACK_TOP + offset;
}
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 468ffa043607..7edcd4946fc1 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -49,6 +49,7 @@
/* Activation Status Register */
#define ACTS_ASC0_ACT 0x00001000
+#define ACTS_SSC0 0x00002000
#define ACTS_ASC1_ACT 0x00000800
#define ACTS_I2C_ACT 0x00004000
#define ACTS_P0 0x00010000
@@ -147,12 +148,11 @@ static void falcon_gpe_enable(void)
if (status & (1 << (GPPC_OFFSET + 1)))
return;
- if (status_r32(STATUS_CONFIG) == 0)
+ freq = (status_r32(STATUS_CONFIG) &
+ GPEFREQ_MASK) >>
+ GPEFREQ_OFFSET;
+ if (freq == 0)
freq = 1; /* use 625MHz on unfused chip */
- else
- freq = (status_r32(STATUS_CONFIG) &
- GPEFREQ_MASK) >>
- GPEFREQ_OFFSET;
/* apply new frequency */
sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
@@ -260,5 +260,6 @@ void __init ltq_soc_init(void)
clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
+ clkdev_add_sys("1e100d00.spi", SYSCTL_SYS1, ACTS_SSC0);
clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
}
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 030568a70ac4..6ab10573490d 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -70,6 +70,7 @@ static struct resource ltq_eiu_irq[MAX_EIU];
static void __iomem *ltq_icu_membase[MAX_IM];
static void __iomem *ltq_eiu_membase;
static struct irq_domain *ltq_domain;
+static int ltq_perfcount_irq;
int ltq_eiu_get_irq(int exin)
{
@@ -378,30 +379,6 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
panic("Failed to remap icu memory");
}
- /* the external interrupts are optional and xway only */
- eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
- if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
- /* find out how many external irq sources we have */
- exin_avail = of_irq_count(eiu_node);
-
- if (exin_avail > MAX_EIU)
- exin_avail = MAX_EIU;
-
- ret = of_irq_to_resource_table(eiu_node,
- ltq_eiu_irq, exin_avail);
- if (ret != exin_avail)
- panic("failed to load external irq resources");
-
- if (request_mem_region(res.start, resource_size(&res),
- res.name) < 0)
- pr_err("Failed to request eiu memory");
-
- ltq_eiu_membase = ioremap_nocache(res.start,
- resource_size(&res));
- if (!ltq_eiu_membase)
- panic("Failed to remap eiu memory");
- }
-
/* turn off all irqs by default */
for (i = 0; i < MAX_IM; i++) {
/* make sure all irqs are turned off by default */
@@ -449,7 +426,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
#endif
/* tell oprofile which irq to use */
- cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
+ ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
/*
* if the timer irq is not one of the mips irqs we need to
@@ -458,9 +435,38 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
if (MIPS_CPU_TIMER_IRQ != 7)
irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
+ /* the external interrupts are optional and xway only */
+ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
+ if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
+ /* find out how many external irq sources we have */
+ exin_avail = of_irq_count(eiu_node);
+
+ if (exin_avail > MAX_EIU)
+ exin_avail = MAX_EIU;
+
+ ret = of_irq_to_resource_table(eiu_node,
+ ltq_eiu_irq, exin_avail);
+ if (ret != exin_avail)
+ panic("failed to load external irq resources");
+
+ if (request_mem_region(res.start, resource_size(&res),
+ res.name) < 0)
+ pr_err("Failed to request eiu memory");
+
+ ltq_eiu_membase = ioremap_nocache(res.start,
+ resource_size(&res));
+ if (!ltq_eiu_membase)
+ panic("Failed to remap eiu memory");
+ }
+
return 0;
}
+int get_c0_perfcount_int(void)
+{
+ return ltq_perfcount_irq;
+}
+
unsigned int get_c0_compare_int(void)
{
return MIPS_CPU_TIMER_IRQ;
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 7447d322d14e..39ab3e786e59 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -36,6 +36,11 @@ const char *get_system_type(void)
return soc_info.sys_type;
}
+int ltq_soc_type(void)
+{
+ return soc_info.type;
+}
+
void prom_free_prom_memory(void)
{
}
@@ -72,6 +77,8 @@ void __init plat_mem_setup(void)
* parsed resulting in our memory appearing
*/
__dt_setup_arch(__dtb_start);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
}
void __init device_tree_init(void)
@@ -97,16 +104,7 @@ void __init prom_init(void)
int __init plat_of_setup(void)
{
- static struct of_device_id of_ids[3];
-
- if (!of_have_populated_dt())
- panic("device tree not present");
-
- strlcpy(of_ids[0].compatible, soc_info.compatible,
- sizeof(of_ids[0].compatible));
- strncpy(of_ids[1].compatible, "simple-bus",
- sizeof(of_ids[1].compatible));
- return of_platform_populate(NULL, of_ids, NULL, NULL);
+ return __dt_register_buses(soc_info.compatible, "simple-bus");
}
arch_initcall(plat_of_setup);
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 087497d97357..a2edc538f477 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,5 @@
obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+obj-y += vmmc.o
+
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 1fa0f175357e..fe68f9ae47c1 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/reset-controller.h>
#include <asm/reboot.h>
@@ -113,10 +114,77 @@ void ltq_reset_once(unsigned int module, ulong u)
ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
}
+static int ltq_assert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ u32 val;
+
+ if (id < 8)
+ return -1;
+
+ val = ltq_rcu_r32(RCU_RST_REQ);
+ val |= BIT(id);
+ ltq_rcu_w32(val, RCU_RST_REQ);
+
+ return 0;
+}
+
+static int ltq_deassert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ u32 val;
+
+ if (id < 8)
+ return -1;
+
+ val = ltq_rcu_r32(RCU_RST_REQ);
+ val &= ~BIT(id);
+ ltq_rcu_w32(val, RCU_RST_REQ);
+
+ return 0;
+}
+
+static int ltq_reset_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ ltq_assert_device(rcdev, id);
+ return ltq_deassert_device(rcdev, id);
+}
+
+static struct reset_control_ops reset_ops = {
+ .reset = ltq_reset_device,
+ .assert = ltq_assert_device,
+ .deassert = ltq_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+ .ops = &reset_ops,
+ .owner = THIS_MODULE,
+ .nr_resets = 32,
+ .of_reset_n_cells = 1,
+};
+
+void ltq_rst_init(void)
+{
+ reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+ "lantiq,xway-reset");
+ if (!reset_dev.of_node)
+ pr_err("Failed to find reset controller node");
+ else
+ reset_controller_register(&reset_dev);
+}
+
static void ltq_machine_restart(char *command)
{
+ u32 val = ltq_rcu_r32(RCU_RST_REQ);
+
+ if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200"))
+ val |= RCU_RD_GPHY1_XRX200 | RCU_RD_GPHY0_XRX200;
+
+ val |= RCU_RD_SRST;
+
local_irq_disable();
- ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
+ ltq_rcu_w32(val, RCU_RST_REQ);
unreachable();
}
diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
new file mode 100644
index 000000000000..696cd57f6f13
--- /dev/null
+++ b/arch/mips/lantiq/xway/vmmc.c
@@ -0,0 +1,69 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/dma-mapping.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int *cp1_base;
+
+unsigned int *ltq_get_cp1_base(void)
+{
+ if (!cp1_base)
+ panic("no cp1 base was set\n");
+
+ return cp1_base;
+}
+EXPORT_SYMBOL(ltq_get_cp1_base);
+
+static int vmmc_probe(struct platform_device *pdev)
+{
+#define CP1_SIZE (1 << 20)
+ int gpio_count;
+ dma_addr_t dma;
+
+ cp1_base =
+ (void *) CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE,
+ &dma, GFP_ATOMIC));
+
+ gpio_count = of_gpio_count(pdev->dev.of_node);
+ while (gpio_count > 0) {
+ enum of_gpio_flags flags;
+ int gpio = of_get_gpio_flags(pdev->dev.of_node,
+ --gpio_count, &flags);
+ if (gpio_request(gpio, "vmmc-relay"))
+ continue;
+ dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
+ gpio_direction_output(gpio,
+ (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
+ }
+
+ dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
+
+ return 0;
+}
+
+static const struct of_device_id vmmc_match[] = {
+ { .compatible = "lantiq,vmmc-xway" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, vmmc_match);
+
+static struct platform_driver vmmc_driver = {
+ .probe = vmmc_probe,
+ .driver = {
+ .name = "lantiq,vmmc",
+ .owner = THIS_MODULE,
+ .of_match_table = vmmc_match,
+ },
+};
+
+module_platform_driver(vmmc_driver);
diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
index d4d9d31f152e..7c1e54c6a36c 100644
--- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
@@ -24,7 +24,28 @@ static dma_addr_t xway_gphy_load(struct platform_device *pdev)
void *fw_addr;
size_t size;
- if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
+ if (of_get_property(pdev->dev.of_node, "firmware1", NULL) ||
+ of_get_property(pdev->dev.of_node, "firmware2", NULL)) {
+ switch (ltq_soc_type()) {
+ case SOC_TYPE_VR9:
+ if (of_property_read_string(pdev->dev.of_node,
+ "firmware1", &fw_name)) {
+ dev_err(&pdev->dev,
+ "failed to load firmware filename\n");
+ return 0;
+ }
+ break;
+ case SOC_TYPE_VR9_2:
+ if (of_property_read_string(pdev->dev.of_node,
+ "firmware2", &fw_name)) {
+ dev_err(&pdev->dev,
+ "failed to load firmware filename\n");
+ return 0;
+ }
+ break;
+ }
+ } else if (of_property_read_string(pdev->dev.of_node,
+ "firmware", &fw_name)) {
dev_err(&pdev->dev, "failed to load firmware filename\n");
return 0;
}
diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c
index e3acb2dad33a..8e7e378ce51c 100644
--- a/arch/mips/lib/iomap.c
+++ b/arch/mips/lib/iomap.c
@@ -97,14 +97,14 @@ EXPORT_SYMBOL(iowrite32be);
/*
* These are the "repeat MMIO read/write" functions.
- * Note the "__raw" accesses, since we don't want to
- * convert to CPU byte order. We write in "IO byte
- * order" (we also don't have IO barriers).
+ * Note the "__mem" accesses, since we want to convert
+ * to CPU byte order if the host bus happens to not match the
+ * endianness of PCI/ISA (see mach-generic/mangle-port.h).
*/
static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
{
while (--count >= 0) {
- u8 data = __raw_readb(addr);
+ u8 data = __mem_readb(addr);
*dst = data;
dst++;
}
@@ -113,7 +113,7 @@ static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
{
while (--count >= 0) {
- u16 data = __raw_readw(addr);
+ u16 data = __mem_readw(addr);
*dst = data;
dst++;
}
@@ -122,7 +122,7 @@ static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
{
while (--count >= 0) {
- u32 data = __raw_readl(addr);
+ u32 data = __mem_readl(addr);
*dst = data;
dst++;
}
@@ -131,7 +131,7 @@ static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
{
while (--count >= 0) {
- __raw_writeb(*src, addr);
+ __mem_writeb(*src, addr);
src++;
}
}
@@ -139,7 +139,7 @@ static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
{
while (--count >= 0) {
- __raw_writew(*src, addr);
+ __mem_writew(*src, addr);
src++;
}
}
@@ -147,7 +147,7 @@ static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
{
while (--count >= 0) {
- __raw_writel(*src, addr);
+ __mem_writel(*src, addr);
src++;
}
}
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 7b0e5462ca51..c8fe6b1968fb 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -114,8 +114,7 @@
R10KCBARRIER(0(ra))
#ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
-#endif
-#ifdef __MIPSEL__
+#else
EX(LONG_S_R, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
#endif
PTR_SUBU a0, t0 /* long align ptr */
@@ -164,8 +163,7 @@
R10KCBARRIER(0(ra))
#ifdef __MIPSEB__
EX(LONG_S_R, a1, -1(a0), .Llast_fixup\@)
-#endif
-#ifdef __MIPSEL__
+#else
EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
#endif
1: jr ra
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 57bcdaf1f1c8..be777d9a3f85 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -42,15 +42,11 @@ notrace void arch_local_irq_disable(void)
__asm__ __volatile__(
" .set push \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2)
- /* see irqflags.h for inline function */
-#else
" mfc0 $1,$12 \n"
" ori $1,0x1f \n"
" xori $1,0x1f \n"
" .set noreorder \n"
" mtc0 $1,$12 \n"
-#endif
" " __stringify(__irq_disable_hazard) " \n"
" .set pop \n"
: /* no outputs */
@@ -72,15 +68,11 @@ notrace unsigned long arch_local_irq_save(void)
" .set push \n"
" .set reorder \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2)
- /* see irqflags.h for inline function */
-#else
" mfc0 %[flags], $12 \n"
" ori $1, %[flags], 0x1f \n"
" xori $1, 0x1f \n"
" .set noreorder \n"
" mtc0 $1, $12 \n"
-#endif
" " __stringify(__irq_disable_hazard) " \n"
" .set pop \n"
: [flags] "=r" (flags)
@@ -103,18 +95,12 @@ notrace void arch_local_irq_restore(unsigned long flags)
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
- /* see irqflags.h for inline function */
-#elif defined(CONFIG_CPU_MIPSR2)
- /* see irqflags.h for inline function */
-#else
" mfc0 $1, $12 \n"
" andi %[flags], 1 \n"
" ori $1, 0x1f \n"
" xori $1, 0x1f \n"
" or %[flags], $1 \n"
" mtc0 %[flags], $12 \n"
-#endif
" " __stringify(__irq_disable_hazard) " \n"
" .set pop \n"
: [flags] "=r" (__tmp1)
@@ -136,18 +122,12 @@ notrace void __arch_local_irq_restore(unsigned long flags)
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
- /* see irqflags.h for inline function */
-#elif defined(CONFIG_CPU_MIPSR2)
- /* see irqflags.h for inline function */
-#else
" mfc0 $1, $12 \n"
" andi %[flags], 1 \n"
" ori $1, 0x1f \n"
" xori $1, 0x1f \n"
" or %[flags], $1 \n"
" mtc0 %[flags], $12 \n"
-#endif
" " __stringify(__irq_disable_hazard) " \n"
" .set pop \n"
: [flags] "=r" (__tmp1)
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 1ef365ab3cd3..975a13855116 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <asm/mipsregs.h>
+#include <asm/mmu_context.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbdebug.h>
@@ -21,7 +22,7 @@ static void dump_tlb(int first, int last)
unsigned int asid;
unsigned long entryhi, entrylo0;
- asid = read_c0_entryhi() & 0xfc0;
+ asid = read_c0_entryhi() & ASID_MASK;
for (i = first; i <= last; i++) {
write_c0_index(i<<8);
@@ -34,8 +35,8 @@ static void dump_tlb(int first, int last)
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & 0xfffff000) != 0x80000000
- && (entryhi & 0xfc0) == asid) {
+ if ((entryhi & PAGE_MASK) != KSEG0
+ && (entryhi & ASID_MASK) == asid) {
/*
* Only print entries in use
*/
@@ -43,8 +44,8 @@ static void dump_tlb(int first, int last)
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
- (entryhi & 0xfffff000),
- entryhi & 0xfc0,
+ entryhi & PAGE_MASK,
+ entryhi & ASID_MASK,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
(entrylo0 & (1 << 10)) ? 1 : 0,
diff --git a/arch/mips/lib/strlen_user.S b/arch/mips/lib/strlen_user.S
index bef65c98df59..929bbacd697e 100644
--- a/arch/mips/lib/strlen_user.S
+++ b/arch/mips/lib/strlen_user.S
@@ -28,7 +28,6 @@ LEAF(__strlen_\func\()_asm)
and v0, a0
bnez v0, .Lfault\@
-FEXPORT(__strlen_\func\()_nocheck_asm)
move v0, a0
.ifeqs "\func", "kernel"
1: EX(lbu, v1, (v0), .Lfault\@)
@@ -48,9 +47,7 @@ FEXPORT(__strlen_\func\()_nocheck_asm)
#ifndef CONFIG_EVA
/* Set aliases */
.global __strlen_user_asm
- .global __strlen_user_nocheck_asm
.set __strlen_user_asm, __strlen_kernel_asm
- .set __strlen_user_nocheck_asm, __strlen_kernel_nocheck_asm
#endif
__BUILD_STRLEN_ASM kernel
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 1b91fc6a921b..156de85b82cd 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -86,6 +86,7 @@ config LOONGSON_MACH3X
select LOONGSON_MC146818
select ZONE_DMA32
select LEFI_FIRMWARE_INTERFACE
+ select PHYS48_TO_HT40
help
Generic Loongson 3 family machines utilize the 3A/3B revision
of Loongson processor and RS780/SBX00 chipset.
@@ -107,6 +108,18 @@ config CS5536_MFGPT
If unsure, say Yes.
+config RS780_HPET
+ bool "RS780/SBX00 HPET Timer"
+ depends on LOONGSON_MACH3X
+ select MIPS_EXTERNAL_TIMER
+ help
+ This option enables the hpet timer of AMD RS780/SBX00.
+
+ If you want to enable the Loongson3 CPUFreq Driver, Please enable
+ this option at first, otherwise, You will get wrong system time.
+
+ If unsure, say Yes.
+
config LOONGSON_SUSPEND
bool
default y
@@ -131,6 +144,10 @@ config SWIOTLB
select NEED_SG_DMA_LENGTH
select NEED_DMA_MAP_STATE
+config PHYS48_TO_HT40
+ bool
+ default y if CPU_LOONGSON3
+
config LOONGSON_MC146818
bool
default n
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c
index 81bed9d18061..b739723205f8 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_pci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <cs5536/cs5536_pci.h>
#include <cs5536/cs5536_vsm.h>
enum {
@@ -35,21 +36,21 @@ enum {
};
static const cs5536_pci_vsm_write vsm_conf_write[] = {
- [CS5536_ISA_FUNC] pci_isa_write_reg,
- [reserved_func] NULL,
- [CS5536_IDE_FUNC] pci_ide_write_reg,
- [CS5536_ACC_FUNC] pci_acc_write_reg,
- [CS5536_OHCI_FUNC] pci_ohci_write_reg,
- [CS5536_EHCI_FUNC] pci_ehci_write_reg,
+ [CS5536_ISA_FUNC] = pci_isa_write_reg,
+ [reserved_func] = NULL,
+ [CS5536_IDE_FUNC] = pci_ide_write_reg,
+ [CS5536_ACC_FUNC] = pci_acc_write_reg,
+ [CS5536_OHCI_FUNC] = pci_ohci_write_reg,
+ [CS5536_EHCI_FUNC] = pci_ehci_write_reg,
};
static const cs5536_pci_vsm_read vsm_conf_read[] = {
- [CS5536_ISA_FUNC] pci_isa_read_reg,
- [reserved_func] NULL,
- [CS5536_IDE_FUNC] pci_ide_read_reg,
- [CS5536_ACC_FUNC] pci_acc_read_reg,
- [CS5536_OHCI_FUNC] pci_ohci_read_reg,
- [CS5536_EHCI_FUNC] pci_ehci_read_reg,
+ [CS5536_ISA_FUNC] = pci_isa_read_reg,
+ [reserved_func] = NULL,
+ [CS5536_IDE_FUNC] = pci_ide_read_reg,
+ [CS5536_ACC_FUNC] = pci_acc_read_reg,
+ [CS5536_OHCI_FUNC] = pci_ohci_read_reg,
+ [CS5536_EHCI_FUNC] = pci_ehci_read_reg,
};
/*
diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
index c2be01f91575..2c6b989c1bc4 100644
--- a/arch/mips/loongson/common/dma-swiotlb.c
+++ b/arch/mips/loongson/common/dma-swiotlb.c
@@ -105,11 +105,25 @@ static int loongson_dma_set_mask(struct device *dev, u64 mask)
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (paddr >> 44) & 0x3;
+ paddr = ((nid << 44) ^ paddr) | (nid << 37);
+#endif
return paddr;
}
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
+ long nid;
+#ifdef CONFIG_PHYS48_TO_HT40
+ /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
+ * Loongson-3's 48bit address space and embed it into 40bit */
+ nid = (daddr >> 37) & 0x3;
+ daddr = ((nid << 37) ^ daddr) | (nid << 44);
+#endif
return daddr;
}
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
index ced461b39069..6ca632e529dc 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson/common/early_printk.c
@@ -30,7 +30,7 @@ void prom_putchar(char c)
int timeout;
unsigned char *uart_base;
- uart_base = (unsigned char *)_loongson_uart_base;
+ uart_base = (unsigned char *)_loongson_uart_base[0];
timeout = 1024;
while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index f15228550a22..045ea3d47c87 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -21,6 +21,7 @@
#include <asm/bootinfo.h>
#include <loongson.h>
#include <boot_param.h>
+#include <workarounds.h>
u32 cpu_clock_freq;
EXPORT_SYMBOL(cpu_clock_freq);
@@ -31,7 +32,6 @@ u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180};
u64 loongson_freqctrl[MAX_PACKAGES];
unsigned long long smp_group[4];
-int cpuhotplug_workaround = 0;
#define parse_even_earlier(res, option, p) \
do { \
@@ -67,6 +67,7 @@ void __init prom_init_env(void)
#else
struct boot_params *boot_p;
struct loongson_params *loongson_p;
+ struct system_loongson *esys;
struct efi_cpuinfo_loongson *ecpu;
struct irq_source_routing_table *eirq_source;
@@ -74,6 +75,8 @@ void __init prom_init_env(void)
boot_p = (struct boot_params *)fw_arg2;
loongson_p = &(boot_p->efi.smbios.lp);
+ esys = (struct system_loongson *)
+ ((u64)loongson_p + loongson_p->system_offset);
ecpu = (struct efi_cpuinfo_loongson *)
((u64)loongson_p + loongson_p->cpu_offset);
eirq_source = (struct irq_source_routing_table *)
@@ -95,6 +98,7 @@ void __init prom_init_env(void)
loongson_chipcfg[2] = 0x900020001fe00180;
loongson_chipcfg[3] = 0x900030001fe00180;
loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+ loongson_sysconf.workarounds = WORKAROUND_CPUFREQ;
} else if (ecpu->cputype == Loongson_3B) {
loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
loongson_sysconf.cores_per_package = 8;
@@ -111,7 +115,7 @@ void __init prom_init_env(void)
loongson_freqctrl[2] = 0x900040001fe001d0;
loongson_freqctrl[3] = 0x900060001fe001d0;
loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
- cpuhotplug_workaround = 1;
+ loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG;
} else {
loongson_sysconf.cores_per_node = 1;
loongson_sysconf.cores_per_package = 1;
@@ -119,6 +123,8 @@ void __init prom_init_env(void)
}
loongson_sysconf.nr_cpus = ecpu->nr_cpus;
+ loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id;
+ loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask;
if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
loongson_sysconf.nr_cpus = NR_CPUS;
loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
@@ -141,6 +147,24 @@ void __init prom_init_env(void)
pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
loongson_sysconf.vgabios_addr);
+
+ memset(loongson_sysconf.ecname, 0, 32);
+ if (esys->has_ec)
+ memcpy(loongson_sysconf.ecname, esys->ec_name, 32);
+ loongson_sysconf.workarounds |= esys->workarounds;
+
+ loongson_sysconf.nr_uarts = esys->nr_uarts;
+ if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS)
+ loongson_sysconf.nr_uarts = 1;
+ memcpy(loongson_sysconf.uarts, esys->uarts,
+ sizeof(struct uart_device) * loongson_sysconf.nr_uarts);
+
+ loongson_sysconf.nr_sensors = esys->nr_sensors;
+ if (loongson_sysconf.nr_sensors > MAX_SENSORS)
+ loongson_sysconf.nr_sensors = 0;
+ if (loongson_sysconf.nr_sensors)
+ memcpy(loongson_sysconf.sensors, esys->sensors,
+ sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
#endif
if (cpu_clock_freq == 0) {
processor_id = (&current_cpu_data)->processor_id;
diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c
index 21869908aaa4..29dbaa253061 100644
--- a/arch/mips/loongson/common/gpio.c
+++ b/arch/mips/loongson/common/gpio.c
@@ -37,7 +37,7 @@ int gpio_get_value(unsigned gpio)
val = LOONGSON_GPIODATA;
spin_unlock(&gpio_lock);
- return ((val & mask) != 0);
+ return (val & mask) != 0;
}
EXPORT_SYMBOL(gpio_get_value);
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index f6af3aba4c86..9b987fe98b5b 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -9,6 +9,7 @@
*/
#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
#include <asm/smp-ops.h>
#include <loongson.h>
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 1a4797984b8d..f2807bc662a3 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -19,19 +19,16 @@
#define MACHTYPE_LEN 50
static const char *system_types[] = {
- [MACH_LOONGSON_UNKNOWN] "unknown loongson machine",
- [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box",
- [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box",
- [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches",
- [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches",
- [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f",
- [MACH_LEMOTE_NAS] "lemote-nas-2f",
- [MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
- [MACH_LEMOTE_A1004] "lemote-3a-notebook-a1004",
- [MACH_LEMOTE_A1101] "lemote-3a-itx-a1101",
- [MACH_LEMOTE_A1201] "lemote-2gq-notebook-a1201",
- [MACH_LEMOTE_A1205] "lemote-2gq-aio-a1205",
- [MACH_LOONGSON_END] NULL,
+ [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine",
+ [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box",
+ [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box",
+ [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches",
+ [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches",
+ [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f",
+ [MACH_LEMOTE_NAS] = "lemote-nas-2f",
+ [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f",
+ [MACH_LOONGSON_GENERIC] = "generic-loongson-machine",
+ [MACH_LOONGSON_END] = NULL,
};
const char *get_system_type(void)
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
index a90d87c01555..b5709af09f7f 100644
--- a/arch/mips/loongson/common/rtc.c
+++ b/arch/mips/loongson/common/rtc.c
@@ -14,7 +14,7 @@
#include <linux/platform_device.h>
#include <linux/mc146818rtc.h>
-struct resource loongson_rtc_resources[] = {
+static struct resource loongson_rtc_resources[] = {
{
.start = RTC_PORT(0),
.end = RTC_PORT(1),
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
index bd2b7095b6dc..c23fa1373729 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson/common/serial.c
@@ -38,20 +38,17 @@
.regshift = 0, \
}
-static struct plat_serial8250_port uart8250_data[][2] = {
- [MACH_LOONGSON_UNKNOWN] {},
- [MACH_LEMOTE_FL2E] {PORT(4, 1843200), {} },
- [MACH_LEMOTE_FL2F] {PORT(3, 1843200), {} },
- [MACH_LEMOTE_ML2F7] {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_YL2F89] {PORT_M(3, 3686400), {} },
- [MACH_DEXXON_GDIUM2F10] {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_NAS] {PORT_M(3, 3686400), {} },
- [MACH_LEMOTE_LL2F] {PORT(3, 1843200), {} },
- [MACH_LEMOTE_A1004] {PORT_M(2, 33177600), {} },
- [MACH_LEMOTE_A1101] {PORT_M(2, 25000000), {} },
- [MACH_LEMOTE_A1201] {PORT_M(2, 25000000), {} },
- [MACH_LEMOTE_A1205] {PORT_M(2, 25000000), {} },
- [MACH_LOONGSON_END] {},
+static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = {
+ [MACH_LOONGSON_UNKNOWN] = {},
+ [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} },
+ [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} },
+ [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} },
+ [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} },
+ [MACH_LOONGSON_END] = {},
};
static struct platform_device uart8250_device = {
@@ -61,17 +58,52 @@ static struct platform_device uart8250_device = {
static int __init serial_init(void)
{
+ int i;
unsigned char iotype;
iotype = uart8250_data[mips_machtype][0].iotype;
- if (UPIO_MEM == iotype)
+ if (UPIO_MEM == iotype) {
+ uart8250_data[mips_machtype][0].mapbase =
+ loongson_uart_base[0];
uart8250_data[mips_machtype][0].membase =
- (void __iomem *)_loongson_uart_base;
+ (void __iomem *)_loongson_uart_base[0];
+ }
else if (UPIO_PORT == iotype)
uart8250_data[mips_machtype][0].iobase =
- loongson_uart_base - LOONGSON_PCIIO_BASE;
+ loongson_uart_base[0] - LOONGSON_PCIIO_BASE;
+ if (loongson_sysconf.uarts[0].uartclk)
+ uart8250_data[mips_machtype][0].uartclk =
+ loongson_sysconf.uarts[0].uartclk;
+
+ for (i = 1; i < loongson_sysconf.nr_uarts; i++) {
+ iotype = loongson_sysconf.uarts[i].iotype;
+ uart8250_data[mips_machtype][i].iotype = iotype;
+ loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base;
+
+ if (UPIO_MEM == iotype) {
+ uart8250_data[mips_machtype][i].irq =
+ MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset;
+ uart8250_data[mips_machtype][i].mapbase =
+ loongson_uart_base[i];
+ uart8250_data[mips_machtype][i].membase =
+ ioremap_nocache(loongson_uart_base[i], 8);
+ } else if (UPIO_PORT == iotype) {
+ uart8250_data[mips_machtype][i].irq =
+ loongson_sysconf.uarts[i].int_offset;
+ uart8250_data[mips_machtype][i].iobase =
+ loongson_uart_base[i] - LOONGSON_PCIIO_BASE;
+ }
+
+ uart8250_data[mips_machtype][i].uartclk =
+ loongson_sysconf.uarts[i].uartclk;
+ uart8250_data[mips_machtype][i].flags =
+ UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ }
+
+ memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts],
+ 0, sizeof(struct plat_serial8250_port));
uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
return platform_device_register(&uart8250_device);
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
index bb4ac922e47a..d477dd6bb326 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson/common/setup.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <asm/wbflush.h>
+#include <asm/bootinfo.h>
#include <loongson.h>
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 262a1f65b05e..e1a5382ad47e 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -12,6 +12,7 @@
*/
#include <asm/mc146818-time.h>
#include <asm/time.h>
+#include <asm/hpet.h>
#include <loongson.h>
#include <cs5536/cs5536_mfgpt.h>
@@ -21,7 +22,11 @@ void __init plat_time_init(void)
/* setup mips r4k timer */
mips_hpt_frequency = cpu_clock_freq / 2;
+#ifdef CONFIG_RS780_HPET
+ setup_hpet_timer();
+#else
setup_mfgpt0_timer();
+#endif
}
void read_persistent_clock(struct timespec *ts)
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
index 1e1eeea73fde..9de559d58e1f 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson/common/uart_base.c
@@ -13,22 +13,27 @@
#include <loongson.h>
-/* ioremapped */
-unsigned long _loongson_uart_base;
-EXPORT_SYMBOL(_loongson_uart_base);
/* raw */
-unsigned long loongson_uart_base;
+unsigned long loongson_uart_base[MAX_UARTS] = {};
+/* ioremapped */
+unsigned long _loongson_uart_base[MAX_UARTS] = {};
+
EXPORT_SYMBOL(loongson_uart_base);
+EXPORT_SYMBOL(_loongson_uart_base);
void prom_init_loongson_uart_base(void)
{
switch (mips_machtype) {
+ case MACH_LOONGSON_GENERIC:
+ /* The CPU provided serial port (CPU) */
+ loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0;
+ break;
case MACH_LEMOTE_FL2E:
- loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8;
+ loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8;
break;
case MACH_LEMOTE_FL2F:
case MACH_LEMOTE_LL2F:
- loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8;
+ loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8;
break;
case MACH_LEMOTE_ML2F7:
case MACH_LEMOTE_YL2F89:
@@ -36,17 +41,10 @@ void prom_init_loongson_uart_base(void)
case MACH_LEMOTE_NAS:
default:
/* The CPU provided serial port (LPC) */
- loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8;
- break;
- case MACH_LEMOTE_A1004:
- case MACH_LEMOTE_A1101:
- case MACH_LEMOTE_A1201:
- case MACH_LEMOTE_A1205:
- /* The CPU provided serial port (CPU) */
- loongson_uart_base = LOONGSON_REG_BASE + 0x1e0;
+ loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8;
break;
}
- _loongson_uart_base =
- (unsigned long)ioremap_nocache(loongson_uart_base, 8);
+ _loongson_uart_base[0] =
+ (unsigned long)ioremap_nocache(loongson_uart_base[0], 8);
}
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 6f8682e44483..cab5f43e0e29 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -93,13 +93,13 @@ static irqreturn_t ip6_action(int cpl, void *dev_id)
return IRQ_HANDLED;
}
-struct irqaction ip6_irqaction = {
+static struct irqaction ip6_irqaction = {
.handler = ip6_action,
.name = "cascade",
.flags = IRQF_SHARED | IRQF_NO_THREAD,
};
-struct irqaction cascade_irqaction = {
+static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
index 79ac694fe744..a26ca7fcd7e0 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -76,7 +76,7 @@ static void fl2f_shutdown(void)
/* reset support for yeeloong2f and mengloong2f notebook */
-void ml2f_reboot(void)
+static void ml2f_reboot(void)
{
reset_cpu();
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
index b4df775b9f30..622fead5ebc9 100644
--- a/arch/mips/loongson/loongson-3/Makefile
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -1,8 +1,10 @@
#
# Makefile for Loongson-3 family machines
#
-obj-y += irq.o cop2-ex.o
+obj-y += irq.o cop2-ex.o platform.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_NUMA) += numa.o
+
+obj-$(CONFIG_RS780_HPET) += hpet.o
diff --git a/arch/mips/loongson/loongson-3/hpet.c b/arch/mips/loongson/loongson-3/hpet.c
new file mode 100644
index 000000000000..e898d68668a9
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/hpet.c
@@ -0,0 +1,257 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/hpet.h>
+#include <asm/time.h>
+
+#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000)
+#define SMBUS_PCI_REG40 0x40
+#define SMBUS_PCI_REG64 0x64
+#define SMBUS_PCI_REGB4 0xb4
+
+static DEFINE_SPINLOCK(hpet_lock);
+DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
+
+static unsigned int smbus_read(int offset)
+{
+ return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset);
+}
+
+static void smbus_write(int offset, int data)
+{
+ *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data;
+}
+
+static void smbus_enable(int offset, int bit)
+{
+ unsigned int cfg = smbus_read(offset);
+
+ cfg |= bit;
+ smbus_write(offset, cfg);
+}
+
+static int hpet_read(int offset)
+{
+ return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset);
+}
+
+static void hpet_write(int offset, int data)
+{
+ *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data;
+}
+
+static void hpet_start_counter(void)
+{
+ unsigned int cfg = hpet_read(HPET_CFG);
+
+ cfg |= HPET_CFG_ENABLE;
+ hpet_write(HPET_CFG, cfg);
+}
+
+static void hpet_stop_counter(void)
+{
+ unsigned int cfg = hpet_read(HPET_CFG);
+
+ cfg &= ~HPET_CFG_ENABLE;
+ hpet_write(HPET_CFG, cfg);
+}
+
+static void hpet_reset_counter(void)
+{
+ hpet_write(HPET_COUNTER, 0);
+ hpet_write(HPET_COUNTER + 4, 0);
+}
+
+static void hpet_restart_counter(void)
+{
+ hpet_stop_counter();
+ hpet_reset_counter();
+ hpet_start_counter();
+}
+
+static void hpet_enable_legacy_int(void)
+{
+ /* Do nothing on Loongson-3 */
+}
+
+static void hpet_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ int cfg = 0;
+
+ spin_lock(&hpet_lock);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_info("set clock event to periodic mode!\n");
+ /* stop counter */
+ hpet_stop_counter();
+
+ /* enables the timer0 to generate a periodic interrupt */
+ cfg = hpet_read(HPET_T0_CFG);
+ cfg &= ~HPET_TN_LEVEL;
+ cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+ HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_write(HPET_T0_CFG, cfg);
+
+ /* set the comparator */
+ hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
+ udelay(1);
+ hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL);
+
+ /* start counter */
+ hpet_start_counter();
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ cfg = hpet_read(HPET_T0_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_write(HPET_T0_CFG, cfg);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ pr_info("set clock event to one shot mode!\n");
+ cfg = hpet_read(HPET_T0_CFG);
+ /* set timer0 type
+ * 1 : periodic interrupt
+ * 0 : non-periodic(oneshot) interrupt
+ */
+ cfg &= ~HPET_TN_PERIODIC;
+ cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
+ hpet_write(HPET_T0_CFG, cfg);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ hpet_enable_legacy_int();
+ break;
+ }
+ spin_unlock(&hpet_lock);
+}
+
+static int hpet_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+ int res;
+
+ cnt = hpet_read(HPET_COUNTER);
+ cnt += delta;
+ hpet_write(HPET_T0_CMP, cnt);
+
+ res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
+ return res;
+}
+
+static irqreturn_t hpet_irq_handler(int irq, void *data)
+{
+ int is_irq;
+ struct clock_event_device *cd;
+ unsigned int cpu = smp_processor_id();
+
+ is_irq = hpet_read(HPET_STATUS);
+ if (is_irq & HPET_T0_IRS) {
+ /* clear the TIMER0 irq status register */
+ hpet_write(HPET_STATUS, HPET_T0_IRS);
+ cd = &per_cpu(hpet_clockevent_device, cpu);
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static struct irqaction hpet_irq = {
+ .handler = hpet_irq_handler,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+ .name = "hpet",
+};
+
+/*
+ * hpet address assignation and irq setting should be done in bios.
+ * but pmon don't do this, we just setup here directly.
+ * The operation under is normal. unfortunately, hpet_setup process
+ * is before pci initialize.
+ *
+ * {
+ * struct pci_dev *pdev;
+ *
+ * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+ * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR);
+ *
+ * ...
+ * }
+ */
+static void hpet_setup(void)
+{
+ /* set hpet base address */
+ smbus_write(SMBUS_PCI_REGB4, HPET_ADDR);
+
+ /* enable decodeing of access to HPET MMIO*/
+ smbus_enable(SMBUS_PCI_REG40, (1 << 28));
+
+ /* HPET irq enable */
+ smbus_enable(SMBUS_PCI_REG64, (1 << 10));
+
+ hpet_enable_legacy_int();
+}
+
+void __init setup_hpet_timer(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+
+ hpet_setup();
+
+ cd = &per_cpu(hpet_clockevent_device, cpu);
+ cd->name = "hpet";
+ cd->rating = 320;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ cd->set_mode = hpet_set_mode;
+ cd->set_next_event = hpet_next_event;
+ cd->irq = HPET_T0_IRQ;
+ cd->cpumask = cpumask_of(cpu);
+ clockevent_set_clock(cd, HPET_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = 5000;
+
+ clockevents_register_device(cd);
+ setup_irq(HPET_T0_IRQ, &hpet_irq);
+ pr_info("hpet clock event device register\n");
+}
+
+static cycle_t hpet_read_counter(struct clocksource *cs)
+{
+ return (cycle_t)hpet_read(HPET_COUNTER);
+}
+
+static void hpet_suspend(struct clocksource *cs)
+{
+}
+
+static void hpet_resume(struct clocksource *cs)
+{
+ hpet_setup();
+ hpet_restart_counter();
+}
+
+static struct clocksource csrc_hpet = {
+ .name = "hpet",
+ /* mips clocksource rating is less than 300, so hpet is better. */
+ .rating = 300,
+ .read = hpet_read_counter,
+ .mask = CLOCKSOURCE_MASK(32),
+ /* oneshot mode work normal with this flag */
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .suspend = hpet_suspend,
+ .resume = hpet_resume,
+ .mult = 0,
+ .shift = 10,
+};
+
+int __init init_hpet_clocksource(void)
+{
+ csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift);
+ return clocksource_register_hz(&csrc_hpet, HPET_FREQ);
+}
+
+arch_initcall(init_hpet_clocksource);
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
index ca1c62af5188..21221edda7a9 100644
--- a/arch/mips/loongson/loongson-3/irq.c
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -9,7 +9,7 @@
#include "smp.h"
-unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
static void ht_irqdispatch(void)
{
@@ -55,8 +55,8 @@ static inline void mask_loongson_irq(struct irq_data *d)
/* Workaround: UART IRQ may deliver to any core */
if (d->irq == LOONGSON_UART_IRQ) {
int cpu = smp_processor_id();
- int node_id = cpu / loongson_sysconf.cores_per_node;
- int core_id = cpu % loongson_sysconf.cores_per_node;
+ int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
+ int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
u64 intenclr_addr = smp_group[node_id] |
(u64)(&LOONGSON_INT_ROUTER_INTENCLR);
u64 introuter_lpc_addr = smp_group[node_id] |
@@ -72,8 +72,8 @@ static inline void unmask_loongson_irq(struct irq_data *d)
/* Workaround: UART IRQ may deliver to any core */
if (d->irq == LOONGSON_UART_IRQ) {
int cpu = smp_processor_id();
- int node_id = cpu / loongson_sysconf.cores_per_node;
- int core_id = cpu % loongson_sysconf.cores_per_node;
+ int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node;
+ int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node;
u64 intenset_addr = smp_group[node_id] |
(u64)(&LOONGSON_INT_ROUTER_INTENSET);
u64 introuter_lpc_addr = smp_group[node_id] |
@@ -102,10 +102,12 @@ void irq_router_init(void)
int i;
/* route LPC int to cpu core0 int 0 */
- LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
+ LOONGSON_INT_ROUTER_LPC =
+ LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0);
/* route HT1 int0 ~ int7 to cpu core0 INT1*/
for (i = 0; i < 8; i++)
- LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
+ LOONGSON_INT_ROUTER_HT1(i) =
+ LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1);
/* enable HT1 interrupt */
LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
/* enable router interrupt intenset */
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c
index 42323bcc5d28..6cae0e75de27 100644
--- a/arch/mips/loongson/loongson-3/numa.c
+++ b/arch/mips/loongson/loongson-3/numa.c
@@ -224,7 +224,7 @@ static void __init node_mem_init(unsigned int node)
static __init void prom_meminit(void)
{
- unsigned int node, cpu;
+ unsigned int node, cpu, active_cpu = 0;
cpu_node_probe();
init_topology_matrix();
@@ -240,8 +240,14 @@ static __init void prom_meminit(void)
node = cpu / loongson_sysconf.cores_per_node;
if (node >= num_online_nodes())
node = 0;
- pr_info("NUMA: set cpumask cpu %d on node %d\n", cpu, node);
- cpu_set(cpu, __node_data[(node)]->cpumask);
+
+ if (loongson_sysconf.reserved_cpus_mask & (1<<cpu))
+ continue;
+
+ cpu_set(active_cpu, __node_data[(node)]->cpumask);
+ pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node);
+
+ active_cpu++;
}
}
diff --git a/arch/mips/loongson/loongson-3/platform.c b/arch/mips/loongson/loongson-3/platform.c
new file mode 100644
index 000000000000..25a97cc0ee33
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/platform.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ * Xiang Yu, xiangy@lemote.com
+ * Chen Huacai, chenhc@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+#include <boot_param.h>
+#include <loongson_hwmon.h>
+#include <workarounds.h>
+
+static int __init loongson3_platform_init(void)
+{
+ int i;
+ struct platform_device *pdev;
+
+ if (loongson_sysconf.ecname[0] != '\0')
+ platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0);
+
+ for (i = 0; i < loongson_sysconf.nr_sensors; i++) {
+ if (loongson_sysconf.sensors[i].type > SENSOR_FAN)
+ continue;
+
+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ pdev->name = loongson_sysconf.sensors[i].name;
+ pdev->id = loongson_sysconf.sensors[i].id;
+ pdev->dev.platform_data = &loongson_sysconf.sensors[i];
+ platform_device_register(pdev);
+ }
+
+ return 0;
+}
+
+arch_initcall(loongson3_platform_init);
diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c
index d8c63af6c7cc..e2eb688b5434 100644
--- a/arch/mips/loongson/loongson-3/smp.c
+++ b/arch/mips/loongson/loongson-3/smp.c
@@ -25,6 +25,7 @@
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <loongson.h>
+#include <workarounds.h>
#include "smp.h"
@@ -239,7 +240,7 @@ static void ipi_mailbox_buf_init(void)
*/
static void loongson3_send_ipi_single(int cpu, unsigned int action)
{
- loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]);
}
static void
@@ -248,7 +249,7 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
unsigned int i;
for_each_cpu(i, mask)
- loongson3_ipi_write32((u32)action, ipi_set0_regs[i]);
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]);
}
void loongson3_ipi_interrupt(struct pt_regs *regs)
@@ -257,10 +258,10 @@ void loongson3_ipi_interrupt(struct pt_regs *regs)
unsigned int action, c0count;
/* Load the ipi register to figure out what we're supposed to do */
- action = loongson3_ipi_read32(ipi_status0_regs[cpu]);
+ action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
/* Clear the ipi register to clear the interrupt */
- loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu]);
+ loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]);
if (action & SMP_RESCHEDULE_YOURSELF)
scheduler_ipi();
@@ -291,12 +292,14 @@ static void loongson3_init_secondary(void)
/* Set interrupt mask, but don't enable */
change_c0_status(ST0_IM, imask);
- for (i = 0; i < loongson_sysconf.nr_cpus; i++)
- loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]);
+ for (i = 0; i < num_possible_cpus(); i++)
+ loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]);
- cpu_data[cpu].package = cpu / loongson_sysconf.cores_per_package;
- cpu_data[cpu].core = cpu % loongson_sysconf.cores_per_package;
per_cpu(cpu_state, cpu) = CPU_ONLINE;
+ cpu_data[cpu].core =
+ cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
+ cpu_data[cpu].package =
+ cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
i = 0;
__this_cpu_write(core0_c0count, 0);
@@ -314,37 +317,50 @@ static void loongson3_init_secondary(void)
static void loongson3_smp_finish(void)
{
+ int cpu = smp_processor_id();
+
write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
local_irq_enable();
loongson3_ipi_write64(0,
- (void *)(ipi_mailbox_buf[smp_processor_id()]+0x0));
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
pr_info("CPU#%d finished, CP0_ST=%x\n",
smp_processor_id(), read_c0_status());
}
static void __init loongson3_smp_setup(void)
{
- int i, num;
+ int i = 0, num = 0; /* i: physical id, num: logical id */
init_cpu_possible(cpu_none_mask);
- set_cpu_possible(0, true);
-
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
/* For unified kernel, NR_CPUS is the maximum possible value,
* loongson_sysconf.nr_cpus is the really present value */
- for (i = 1, num = 0; i < loongson_sysconf.nr_cpus; i++) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
+ while (i < loongson_sysconf.nr_cpus) {
+ if (loongson_sysconf.reserved_cpus_mask & (1<<i)) {
+ /* Reserved physical CPU cores */
+ __cpu_number_map[i] = -1;
+ } else {
+ __cpu_number_map[i] = num;
+ __cpu_logical_map[num] = i;
+ set_cpu_possible(num, true);
+ num++;
+ }
+ i++;
}
+ pr_info("Detected %i available CPU(s)\n", num);
+
+ while (num < loongson_sysconf.nr_cpus) {
+ __cpu_logical_map[num] = -1;
+ num++;
+ }
+
ipi_set0_regs_init();
ipi_clear0_regs_init();
ipi_status0_regs_init();
ipi_en0_regs_init();
ipi_mailbox_buf_init();
- pr_info("Detected %i available secondary CPU(s)\n", num);
+ cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package;
+ cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
}
static void __init loongson3_prepare_cpus(unsigned int max_cpus)
@@ -371,10 +387,14 @@ static void loongson3_boot_secondary(int cpu, struct task_struct *idle)
pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
cpu, startargs[0], startargs[1], startargs[2]);
- loongson3_ipi_write64(startargs[3], (void *)(ipi_mailbox_buf[cpu]+0x18));
- loongson3_ipi_write64(startargs[2], (void *)(ipi_mailbox_buf[cpu]+0x10));
- loongson3_ipi_write64(startargs[1], (void *)(ipi_mailbox_buf[cpu]+0x8));
- loongson3_ipi_write64(startargs[0], (void *)(ipi_mailbox_buf[cpu]+0x0));
+ loongson3_ipi_write64(startargs[3],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18));
+ loongson3_ipi_write64(startargs[2],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10));
+ loongson3_ipi_write64(startargs[1],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8));
+ loongson3_ipi_write64(startargs[0],
+ (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0));
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -568,7 +588,7 @@ void loongson3_disable_clock(int cpu)
if (loongson_sysconf.cputype == Loongson_3A) {
LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
} else if (loongson_sysconf.cputype == Loongson_3B) {
- if (!cpuhotplug_workaround)
+ if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
}
}
@@ -581,7 +601,7 @@ void loongson3_enable_clock(int cpu)
if (loongson_sysconf.cputype == Loongson_3A) {
LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
} else if (loongson_sysconf.cputype == Loongson_3B) {
- if (!cpuhotplug_workaround)
+ if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
}
}
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
index e23c25d09963..a2b796eaf3c3 100644
--- a/arch/mips/loongson1/Kconfig
+++ b/arch/mips/loongson1/Kconfig
@@ -5,8 +5,8 @@ choice
config LOONGSON1_LS1B
bool "Loongson LS1B board"
- select CEVT_R4K
- select CSRC_R4K
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
select SYS_HAS_CPU_LOONGSON1B
select DMA_NONCOHERENT
select BOOT_ELF32
@@ -16,8 +16,46 @@ config LOONGSON1_LS1B
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_MIPS16
select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
select COMMON_CLK
endchoice
+menuconfig CEVT_CSRC_LS1X
+ bool "Use PWM Timer for clockevent/clocksource"
+ select MIPS_EXTERNAL_TIMER
+ depends on CPU_LOONGSON1
+ help
+ This option changes the default clockevent/clocksource to PWM Timer,
+ and is required by Loongson1 CPUFreq support.
+
+ If unsure, say N.
+
+choice
+ prompt "Select clockevent/clocksource"
+ depends on CEVT_CSRC_LS1X
+ default TIMER_USE_PWM0
+
+config TIMER_USE_PWM0
+ bool "Use PWM Timer 0"
+ help
+ Use PWM Timer 0 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM1
+ bool "Use PWM Timer 1"
+ help
+ Use PWM Timer 1 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM2
+ bool "Use PWM Timer 2"
+ help
+ Use PWM Timer 2 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM3
+ bool "Use PWM Timer 3"
+ help
+ Use PWM Timer 3 as the default clockevent/clocksourcer.
+
+endchoice
+
endif # MACH_LOONGSON1
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
index b2797709ef5b..723b4ce3b8f0 100644
--- a/arch/mips/loongson1/common/Makefile
+++ b/arch/mips/loongson1/common/Makefile
@@ -2,4 +2,4 @@
# Makefile for common code of loongson1 based machines.
#
-obj-y += clock.o irq.o platform.o prom.o reset.o setup.o
+obj-y += time.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
deleted file mode 100644
index b4437f19c3d9..000000000000
--- a/arch/mips/loongson1/common/clock.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/time.h>
-#include <platform.h>
-
-void __init plat_time_init(void)
-{
- struct clk *clk;
-
- /* Initialize LS1X clocks */
- ls1x_clk_init();
-
- /* setup mips r4k timer */
- clk = clk_get(NULL, "cpu");
- if (IS_ERR(clk))
- panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
index fdf8cb5987a4..ddf1d4cbf31e 100644
--- a/arch/mips/loongson1/common/platform.c
+++ b/arch/mips/loongson1/common/platform.c
@@ -16,8 +16,10 @@
#include <linux/usb/ehci_pdriver.h>
#include <asm-generic/sizes.h>
+#include <cpufreq.h>
#include <loongson1.h>
+/* 8250/16550 compatible UART */
#define LS1X_UART(_id) \
{ \
.mapbase = LS1X_UART ## _id ## _BASE, \
@@ -27,7 +29,7 @@
.type = PORT_16550A, \
}
-static struct plat_serial8250_port ls1x_serial8250_port[] = {
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
LS1X_UART(0),
LS1X_UART(1),
LS1X_UART(2),
@@ -35,11 +37,11 @@ static struct plat_serial8250_port ls1x_serial8250_port[] = {
{},
};
-struct platform_device ls1x_uart_device = {
+struct platform_device ls1x_uart_pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
- .platform_data = ls1x_serial8250_port,
+ .platform_data = ls1x_serial8250_pdata,
},
};
@@ -48,16 +50,97 @@ void __init ls1x_serial_setup(struct platform_device *pdev)
struct clk *clk;
struct plat_serial8250_port *p;
- clk = clk_get(NULL, pdev->name);
- if (IS_ERR(clk))
- panic("unable to get %s clock, err=%ld",
- pdev->name, PTR_ERR(clk));
+ clk = clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(clk)) {
+ pr_err("unable to get %s clock, err=%ld",
+ pdev->name, PTR_ERR(clk));
+ return;
+ }
+ clk_prepare_enable(clk);
for (p = pdev->dev.platform_data; p->flags != 0; ++p)
p->uartclk = clk_get_rate(clk);
}
+/* CPUFreq */
+static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
+ .clk_name = "cpu_clk",
+ .osc_clk_name = "osc_33m_clk",
+ .max_freq = 266 * 1000,
+ .min_freq = 33 * 1000,
+};
+
+struct platform_device ls1x_cpufreq_pdev = {
+ .name = "ls1x-cpufreq",
+ .dev = {
+ .platform_data = &ls1x_cpufreq_pdata,
+ },
+};
+
/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .phy_mask = 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+ .pbl = 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ u32 val;
+
+ val = __raw_readl(LS1X_MUX_CTRL1);
+
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (plat_dat->bus_id) {
+ __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+ GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC1_SHUT;
+ } else {
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC0_SHUT;
+ }
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+ .bus_id = 0,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .init = ls1x_eth_mux_init,
+};
+
static struct resource ls1x_eth0_resources[] = {
[0] = {
.start = LS1X_GMAC0_BASE,
@@ -71,25 +154,47 @@ static struct resource ls1x_eth0_resources[] = {
},
};
-static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
- .phy_mask = 0,
+struct platform_device ls1x_eth0_pdev = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth0_pdata,
+ },
};
-static struct plat_stmmacenet_data ls1x_eth_data = {
- .bus_id = 0,
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+ .bus_id = 1,
.phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
.mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
.tx_coe = 1,
+ .init = ls1x_eth_mux_init,
};
-struct platform_device ls1x_eth0_device = {
+static struct resource ls1x_eth1_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC1_BASE,
+ .end = LS1X_GMAC1_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth1_pdev = {
.name = "stmmaceth",
- .id = 0,
- .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
- .resource = ls1x_eth0_resources,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
+ .resource = ls1x_eth1_resources,
.dev = {
- .platform_data = &ls1x_eth_data,
+ .platform_data = &ls1x_eth1_pdata,
},
};
@@ -111,7 +216,7 @@ static struct resource ls1x_ehci_resources[] = {
static struct usb_ehci_pdata ls1x_ehci_pdata = {
};
-struct platform_device ls1x_ehci_device = {
+struct platform_device ls1x_ehci_pdev = {
.name = "ehci-platform",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_ehci_resources),
@@ -123,7 +228,7 @@ struct platform_device ls1x_ehci_device = {
};
/* Real Time Clock */
-struct platform_device ls1x_rtc_device = {
+struct platform_device ls1x_rtc_pdev = {
.name = "ls1x-rtc",
.id = -1,
};
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
index 2a47af5a55c3..68600980ea49 100644
--- a/arch/mips/loongson1/common/prom.c
+++ b/arch/mips/loongson1/common/prom.c
@@ -27,7 +27,7 @@ char *prom_getenv(char *envname)
i = strlen(envname);
while (*env) {
- if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+ if (strncmp(envname, *env, i) == 0 && *(*env + i) == '=')
return *env + i + 1;
env++;
}
@@ -49,7 +49,7 @@ void __init prom_init_cmdline(void)
for (i = 1; i < prom_argc; i++) {
strcpy(c, prom_argv[i]);
c += strlen(prom_argv[i]);
- if (i < prom_argc-1)
+ if (i < prom_argc - 1)
*c++ = ' ';
}
*c = 0;
@@ -57,6 +57,7 @@ void __init prom_init_cmdline(void)
void __init prom_init(void)
{
+ void __iomem *uart_base;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
@@ -65,23 +66,18 @@ void __init prom_init(void)
memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
highmemsize = env_or_default("highmemsize", 0x0);
-}
-void __init prom_free_prom_memory(void)
-{
+ if (strstr(arcs_cmdline, "console=ttyS3"))
+ uart_base = ioremap_nocache(LS1X_UART3_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS2"))
+ uart_base = ioremap_nocache(LS1X_UART2_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS1"))
+ uart_base = ioremap_nocache(LS1X_UART1_BASE, 0x0f);
+ else
+ uart_base = ioremap_nocache(LS1X_UART0_BASE, 0x0f);
+ setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
}
-#define PORT(offset) (u8 *)(KSEG1ADDR(LS1X_UART0_BASE + offset))
-
-void prom_putchar(char c)
+void __init prom_free_prom_memory(void)
{
- int timeout;
-
- timeout = 1024;
-
- while (((readb(PORT(UART_LSR)) & UART_LSR_THRE) == 0)
- && (timeout-- > 0))
- ;
-
- writeb(c, PORT(UART_TX));
}
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index 547f34b69e4c..c41e4ca56ab4 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -14,12 +14,7 @@
#include <loongson1.h>
-static void ls1x_restart(char *command)
-{
- __raw_writel(0x1, LS1X_WDT_EN);
- __raw_writel(0x5000000, LS1X_WDT_TIMER);
- __raw_writel(0x1, LS1X_WDT_SET);
-}
+static void __iomem *wdt_base;
static void ls1x_halt(void)
{
@@ -29,6 +24,15 @@ static void ls1x_halt(void)
}
}
+static void ls1x_restart(char *command)
+{
+ __raw_writel(0x1, wdt_base + WDT_EN);
+ __raw_writel(0x1, wdt_base + WDT_TIMER);
+ __raw_writel(0x1, wdt_base + WDT_SET);
+
+ ls1x_halt();
+}
+
static void ls1x_power_off(void)
{
ls1x_halt();
@@ -36,6 +40,10 @@ static void ls1x_power_off(void)
static int __init ls1x_reboot_setup(void)
{
+ wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
+ if (!wdt_base)
+ panic("Failed to remap watchdog registers");
+
_machine_restart = ls1x_restart;
_machine_halt = ls1x_halt;
pm_power_off = ls1x_power_off;
diff --git a/arch/mips/loongson1/common/time.c b/arch/mips/loongson1/common/time.c
new file mode 100644
index 000000000000..df0f850d6a5f
--- /dev/null
+++ b/arch/mips/loongson1/common/time.c
@@ -0,0 +1,226 @@
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+#include <platform.h>
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+
+#if defined(CONFIG_TIMER_USE_PWM1)
+#define LS1X_TIMER_BASE LS1X_PWM1_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM2)
+#define LS1X_TIMER_BASE LS1X_PWM2_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM3)
+#define LS1X_TIMER_BASE LS1X_PWM3_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
+
+#else
+#define LS1X_TIMER_BASE LS1X_PWM0_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
+#endif
+
+DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
+
+static void __iomem *timer_base;
+static uint32_t ls1x_jiffies_per_tick;
+
+static inline void ls1x_pwmtimer_set_period(uint32_t period)
+{
+ __raw_writel(period, timer_base + PWM_HRC);
+ __raw_writel(period, timer_base + PWM_LRC);
+}
+
+static inline void ls1x_pwmtimer_restart(void)
+{
+ __raw_writel(0x0, timer_base + PWM_CNT);
+ __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+}
+
+void __init ls1x_pwmtimer_init(void)
+{
+ timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
+ if (!timer_base)
+ panic("Failed to remap timer registers");
+
+ ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
+
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+}
+
+static cycle_t ls1x_clocksource_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = __raw_readl(timer_base + PWM_CNT);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
+
+ return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
+}
+
+static struct clocksource ls1x_clocksource = {
+ .name = "ls1x-pwmtimer",
+ .read = ls1x_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
+{
+ struct clock_event_device *cd = devid;
+
+ ls1x_pwmtimer_restart();
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static void ls1x_clockevent_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+ case CLOCK_EVT_MODE_RESUME:
+ __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
+ timer_base + PWM_CTRL);
+ break;
+ default:
+ break;
+ }
+ raw_spin_unlock(&ls1x_timer_lock);
+}
+
+static int ls1x_clockevent_set_next(unsigned long evt,
+ struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(evt);
+ ls1x_pwmtimer_restart();
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static struct clock_event_device ls1x_clockevent = {
+ .name = "ls1x-pwmtimer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 300,
+ .irq = LS1X_TIMER_IRQ,
+ .set_next_event = ls1x_clockevent_set_next,
+ .set_mode = ls1x_clockevent_set_mode,
+};
+
+static struct irqaction ls1x_pwmtimer_irqaction = {
+ .name = "ls1x-pwmtimer",
+ .handler = ls1x_clockevent_isr,
+ .dev_id = &ls1x_clockevent,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+};
+
+static void __init ls1x_time_init(void)
+{
+ struct clock_event_device *cd = &ls1x_clockevent;
+ int ret;
+
+ if (!mips_hpt_frequency)
+ panic("Invalid timer clock rate");
+
+ ls1x_pwmtimer_init();
+
+ clockevent_set_clock(cd, mips_hpt_frequency);
+ cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
+ cd->cpumask = cpumask_of(smp_processor_id());
+ clockevents_register_device(cd);
+
+ ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
+ ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
+ if (ret)
+ panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
+
+ setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
+}
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+
+void __init plat_time_init(void)
+{
+ struct clk *clk = NULL;
+
+ /* initialize LS1X clocks */
+ ls1x_clk_init();
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+ /* setup LS1X PWM timer */
+ clk = clk_get(NULL, "ls1x_pwmtimer");
+ if (IS_ERR(clk))
+ panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ ls1x_time_init();
+#else
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(clk))
+ panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+}
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
index b26b10dac70a..58daeea25739 100644
--- a/arch/mips/loongson1/ls1b/board.c
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -10,17 +10,19 @@
#include <platform.h>
static struct platform_device *ls1b_platform_devices[] __initdata = {
- &ls1x_uart_device,
- &ls1x_eth0_device,
- &ls1x_ehci_device,
- &ls1x_rtc_device,
+ &ls1x_uart_pdev,
+ &ls1x_cpufreq_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_eth1_pdev,
+ &ls1x_ehci_pdev,
+ &ls1x_rtc_pdev,
};
static int __init ls1b_platform_init(void)
{
int err;
- ls1x_serial_setup(&ls1x_uart_device);
+ ls1x_serial_setup(&ls1x_uart_pdev);
err = platform_add_devices(ls1b_platform_devices,
ARRAY_SIZE(ls1b_platform_devices));
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index cac529a405b8..9dfcd7fc1bc3 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -643,9 +643,14 @@ static inline int cop1_64bit(struct pt_regs *xcp)
return !test_thread_flag(TIF_32BIT_FPREGS);
}
+static inline bool hybrid_fprs(void)
+{
+ return test_thread_flag(TIF_HYBRID_FPREGS);
+}
+
#define SIFROMREG(si, x) \
do { \
- if (cop1_64bit(xcp)) \
+ if (cop1_64bit(xcp) && !hybrid_fprs()) \
(si) = (int)get_fpr32(&ctx->fpr[x], 0); \
else \
(si) = (int)get_fpr32(&ctx->fpr[(x) & ~1], (x) & 1); \
@@ -653,7 +658,7 @@ do { \
#define SITOREG(si, x) \
do { \
- if (cop1_64bit(xcp)) { \
+ if (cop1_64bit(xcp) && !hybrid_fprs()) { \
unsigned i; \
set_fpr32(&ctx->fpr[x], 0, si); \
for (i = 1; i < ARRAY_SIZE(ctx->fpr[x].val32); i++) \
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index fd134675fc2e..068f45a415fc 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -38,7 +38,7 @@ int ieee754dp_isnan(union ieee754dp x)
static inline int ieee754dp_issnan(union ieee754dp x)
{
assert(ieee754dp_isnan(x));
- return ((DPMANT(x) & DP_MBIT(DP_FBITS-1)) == DP_MBIT(DP_FBITS-1));
+ return (DPMANT(x) & DP_MBIT(DP_FBITS - 1)) == DP_MBIT(DP_FBITS - 1);
}
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index d348efe91445..ba88301579c2 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -38,7 +38,7 @@ int ieee754sp_isnan(union ieee754sp x)
static inline int ieee754sp_issnan(union ieee754sp x)
{
assert(ieee754sp_isnan(x));
- return (SPMANT(x) & SP_MBIT(SP_FBITS-1));
+ return SPMANT(x) & SP_MBIT(SP_FBITS - 1);
}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 7f4f93ab22b7..67ede4ef9b8d 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -4,7 +4,13 @@
obj-y += cache.o dma-default.o extable.o fault.o \
gup.o init.o mmap.o page.o page-funcs.o \
- tlbex.o tlbex-fault.o tlb-funcs.o uasm-mips.o
+ tlbex.o tlbex-fault.o tlb-funcs.o
+
+ifdef CONFIG_CPU_MICROMIPS
+obj-y += uasm-micromips.o
+else
+obj-y += uasm-mips.o
+endif
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
obj-$(CONFIG_64BIT) += pgtable-64.o
@@ -22,5 +28,3 @@ obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
-
-obj-$(CONFIG_SYS_SUPPORTS_MICROMIPS) += uasm-micromips.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index fbcd8674ff1d..dd261df005c2 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -917,6 +917,18 @@ static inline void alias_74k_erratum(struct cpuinfo_mips *c)
}
}
+static void b5k_instruction_hazard(void)
+{
+ __sync();
+ __sync();
+ __asm__ __volatile__(
+ " nop; nop; nop; nop; nop; nop; nop; nop\n"
+ " nop; nop; nop; nop; nop; nop; nop; nop\n"
+ " nop; nop; nop; nop; nop; nop; nop; nop\n"
+ " nop; nop; nop; nop; nop; nop; nop; nop\n"
+ : : : "memory");
+}
+
static char *way_string[] = { NULL, "direct mapped", "2-way",
"3-way", "4-way", "5-way", "6-way", "7-way", "8-way"
};
@@ -1683,6 +1695,37 @@ void r4k_cache_init(void)
coherency_setup();
board_cache_error_setup = r4k_cache_error_setup;
+
+ /*
+ * Per-CPU overrides
+ */
+ switch (current_cpu_type()) {
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ /* No IPI is needed because all CPUs share the same D$ */
+ flush_data_cache_page = r4k_blast_dcache_page;
+ break;
+ case CPU_BMIPS5000:
+ /* We lose our superpowers if L2 is disabled */
+ if (c->scache.flags & MIPS_CACHE_NOT_PRESENT)
+ break;
+
+ /* I$ fills from D$ just by emptying the write buffers */
+ flush_cache_page = (void *)b5k_instruction_hazard;
+ flush_cache_range = (void *)b5k_instruction_hazard;
+ flush_cache_sigtramp = (void *)b5k_instruction_hazard;
+ local_flush_data_cache_page = (void *)b5k_instruction_hazard;
+ flush_data_cache_page = (void *)b5k_instruction_hazard;
+ flush_icache_range = (void *)b5k_instruction_hazard;
+ local_flush_icache_range = (void *)b5k_instruction_hazard;
+
+ /* Cache aliases are handled in hardware; allow HIGHMEM */
+ current_cpu_data.dcache.flags &= ~MIPS_CACHE_ALIASES;
+
+ /* Optimization: an L2 flush implicitly flushes the L1 */
+ current_cpu_data.options |= MIPS_CPU_INCLUSIVE_CACHES;
+ break;
+ }
}
static int r4k_cache_pm_notifier(struct notifier_block *self, unsigned long cmd,
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 33ba3c558fe4..af5f046e627e 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -61,6 +61,11 @@ static inline struct page *dma_addr_to_page(struct device *dev,
* Warning on the terminology - Linux calls an uncached area coherent;
* MIPS terminology calls memory areas with hardware maintained coherency
* coherent.
+ *
+ * Note that the R14000 and R16000 should also be checked for in this
+ * condition. However this function is only called on non-I/O-coherent
+ * systems and only the R10000 and R12000 are used in such systems, the
+ * SGI IP28 Indigo² rsp. SGI IP32 aka O2.
*/
static inline int cpu_needs_post_dma_flush(struct device *dev)
{
diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c
index 06ce17c2a905..7cba480568c8 100644
--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -17,7 +17,7 @@
static inline pte_t gup_get_pte(pte_t *ptep)
{
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
pte_t pte;
retry:
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index f42e35e42790..448cde372af0 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -95,7 +95,7 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
idx += in_interrupt() ? FIX_N_COLOURS : 0;
vaddr = __fix_to_virt(FIX_CMAP_END - idx);
pte = mk_pte(page, prot);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
entrylo = pte.pte_high;
#else
entrylo = pte_to_entrylo(pte_val(pte));
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 7f840bc08abf..8d5008cbdc0f 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -17,9 +17,9 @@
#include <asm/tlbflush.h>
static inline void remap_area_pte(pte_t * pte, unsigned long address,
- phys_t size, phys_t phys_addr, unsigned long flags)
+ phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
{
- phys_t end;
+ phys_addr_t end;
unsigned long pfn;
pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
| __WRITEABLE | flags);
@@ -43,9 +43,9 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address,
}
static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
- phys_t size, phys_t phys_addr, unsigned long flags)
+ phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
{
- phys_t end;
+ phys_addr_t end;
address &= ~PGDIR_MASK;
end = address + size;
@@ -64,8 +64,8 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
return 0;
}
-static int remap_area_pages(unsigned long address, phys_t phys_addr,
- phys_t size, unsigned long flags)
+static int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
+ phys_addr_t size, unsigned long flags)
{
int error;
pgd_t * dir;
@@ -111,13 +111,13 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr,
* caller shouldn't need to know that small detail.
*/
-#define IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
-void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
+void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags)
{
struct vm_struct * area;
unsigned long offset;
- phys_t last_addr;
+ phys_addr_t last_addr;
void * addr;
phys_addr = fixup_bigphys_addr(phys_addr, size);
diff --git a/arch/mips/mm/sc-r5k.c b/arch/mips/mm/sc-r5k.c
index 0216ed6eaa2a..751b5cd18bf2 100644
--- a/arch/mips/mm/sc-r5k.c
+++ b/arch/mips/mm/sc-r5k.c
@@ -81,7 +81,7 @@ static inline int __init r5k_sc_probe(void)
unsigned long config = read_c0_config();
if (config & CONF_SC)
- return(0);
+ return 0;
scache_size = (512 * 1024) << ((config & R5K_CONF_SS) >> 20);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index c3917e251f59..e90b2e899291 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -332,7 +332,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
{
ptep = pte_offset_map(pmdp, address);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
write_c0_entrylo0(ptep->pte_high);
ptep++;
write_c0_entrylo1(ptep->pte_high);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index e3328a96e809..3978a3d81366 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -637,7 +637,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
if (cpu_has_rixi) {
UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
} else {
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
#else
UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
@@ -1009,7 +1009,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
* 64bit address support (36bit on a 32bit CPU) in a 32bit
* Kernel is a special case. Only a few CPUs use it.
*/
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
if (cpu_has_64bits) {
uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
@@ -1510,14 +1510,14 @@ static void
iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
{
#ifdef CONFIG_SMP
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (cpu_has_64bits)
uasm_i_lld(p, pte, 0, ptr);
else
# endif
UASM_i_LL(p, pte, 0, ptr);
#else
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (cpu_has_64bits)
uasm_i_ld(p, pte, 0, ptr);
else
@@ -1530,13 +1530,13 @@ static void
iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
unsigned int mode)
{
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
#endif
uasm_i_ori(p, pte, pte, mode);
#ifdef CONFIG_SMP
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (cpu_has_64bits)
uasm_i_scd(p, pte, 0, ptr);
else
@@ -1548,7 +1548,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
else
uasm_il_beqz(p, r, pte, label_smp_pgtable_change);
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (!cpu_has_64bits) {
/* no uasm_i_nop needed */
uasm_i_ll(p, pte, sizeof(pte_t) / 2, ptr);
@@ -1563,14 +1563,14 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
uasm_i_nop(p);
# endif
#else
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (cpu_has_64bits)
uasm_i_sd(p, pte, 0, ptr);
else
# endif
UASM_i_SW(p, pte, 0, ptr);
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
if (!cpu_has_64bits) {
uasm_i_lw(p, pte, sizeof(pte_t) / 2, ptr);
uasm_i_ori(p, pte, pte, hwmode);
diff --git a/arch/mips/mm/uasm-mips.c b/arch/mips/mm/uasm-mips.c
index 6708a2dbf934..8e02291cfc0c 100644
--- a/arch/mips/mm/uasm-mips.c
+++ b/arch/mips/mm/uasm-mips.c
@@ -96,9 +96,11 @@ static struct insn insn_table[] = {
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
{ insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
+ { insn_mfhc0, M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mfhi, M(spec_op, 0, 0, 0, 0, mfhi_op), RD },
{ insn_mflo, M(spec_op, 0, 0, 0, 0, mflo_op), RD },
{ insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
+ { insn_mthc0, M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mul, M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index a01b0d6cedd2..4adf30284813 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -51,12 +51,12 @@ enum opcode {
insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_dsubu, insn_eret,
insn_ext, insn_ins, insn_j, insn_jal, insn_jalr, insn_jr, insn_lb,
insn_ld, insn_ldx, insn_lh, insn_ll, insn_lld, insn_lui, insn_lw,
- insn_lwx, insn_mfc0, insn_mfhi, insn_mflo, insn_mtc0, insn_mul,
- insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sc, insn_scd,
- insn_sd, insn_sll, insn_sllv, insn_slt, insn_sltiu, insn_sltu, insn_sra,
- insn_srl, insn_srlv, insn_subu, insn_sw, insn_sync, insn_syscall,
- insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_wait, insn_wsbh,
- insn_xor, insn_xori, insn_yield,
+ insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi, insn_mflo, insn_mtc0,
+ insn_mthc0, insn_mul, insn_or, insn_ori, insn_pref, insn_rfe,
+ insn_rotr, insn_sc, insn_scd, insn_sd, insn_sll, insn_sllv, insn_slt,
+ insn_sltiu, insn_sltu, insn_sra, insn_srl, insn_srlv, insn_subu,
+ insn_sw, insn_sync, insn_syscall, insn_tlbp, insn_tlbr, insn_tlbwi,
+ insn_tlbwr, insn_wait, insn_wsbh, insn_xor, insn_xori, insn_yield,
};
struct insn {
@@ -284,9 +284,11 @@ I_u2s3u1(_lld)
I_u1s2(_lui)
I_u2s3u1(_lw)
I_u1u2u3(_mfc0)
+I_u1u2u3(_mfhc0)
I_u1(_mfhi)
I_u1(_mflo)
I_u1u2u3(_mtc0)
+I_u1u2u3(_mthc0)
I_u3u1u2(_mul)
I_u2u1u3(_ori)
I_u3u1u2(_or)
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 0f60256d3784..6849f533154f 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -111,7 +111,7 @@ static void __init mips_ejtag_setup(void)
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
-phys_t mips_cpc_default_phys_base(void)
+phys_addr_t mips_cpc_default_phys_base(void)
{
return CPC_BASE_ADDR;
}
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index e4f43baa8f67..d1392f8f5811 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -18,6 +18,7 @@
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
@@ -33,19 +34,13 @@
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/msc01_pci.h>
#include <asm/msc01_ic.h>
-#include <asm/gic.h>
#include <asm/setup.h>
#include <asm/rtlx.h>
-static unsigned long _msc01_biu_base;
-static unsigned int ipi_map[NR_CPUS];
+static void __iomem *_msc01_biu_base;
static DEFINE_RAW_SPINLOCK(mips_irq_lock);
-#ifdef CONFIG_MIPS_GIC_IPI
-DECLARE_BITMAP(ipi_ints, GIC_NUM_INTRS);
-#endif
-
static inline int mips_pcibios_iack(void)
{
int irq;
@@ -127,24 +122,10 @@ static void malta_hw0_irqdispatch(void)
#endif
}
-static void malta_ipi_irqdispatch(void)
+static irqreturn_t i8259_handler(int irq, void *dev_id)
{
-#ifdef CONFIG_MIPS_GIC_IPI
- unsigned long irq;
- DECLARE_BITMAP(pending, GIC_NUM_INTRS);
-
- gic_get_int_mask(pending, ipi_ints);
-
- irq = find_first_bit(pending, GIC_NUM_INTRS);
-
- while (irq < GIC_NUM_INTRS) {
- do_IRQ(MIPS_GIC_IRQ_BASE + irq);
-
- irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1);
- }
-#endif
- if (gic_compare_int())
- do_IRQ(MIPS_GIC_IRQ_BASE);
+ malta_hw0_irqdispatch();
+ return IRQ_HANDLED;
}
static void corehi_irqdispatch(void)
@@ -203,95 +184,10 @@ static void corehi_irqdispatch(void)
die("CoreHi interrupt", regs);
}
-static inline int clz(unsigned long x)
-{
- __asm__(
- " .set push \n"
- " .set mips32 \n"
- " clz %0, %1 \n"
- " .set pop \n"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- return -clz(pending) + 31 - CAUSEB_IP;
-#else
- unsigned int a0 = 7;
- unsigned int t0;
-
- t0 = pending & 0xf000;
- t0 = t0 < 1;
- t0 = t0 << 2;
- a0 = a0 - t0;
- pending = pending << t0;
-
- t0 = pending & 0xc000;
- t0 = t0 < 1;
- t0 = t0 << 1;
- a0 = a0 - t0;
- pending = pending << t0;
-
- t0 = pending & 0x8000;
- t0 = t0 < 1;
- /* t0 = t0 << 2; */
- a0 = a0 - t0;
- /* pending = pending << t0; */
-
- return a0;
-#endif
-}
-
-/*
- * IRQs on the Malta board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-asmlinkage void plat_irq_dispatch(void)
+static irqreturn_t corehi_handler(int irq, void *dev_id)
{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
- int irq;
-
- if (unlikely(!pending)) {
- spurious_interrupt();
- return;
- }
-
- irq = irq_ffs(pending);
-
- if (irq == MIPSCPU_INT_I8259A)
- malta_hw0_irqdispatch();
- else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
- malta_ipi_irqdispatch();
- else
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ corehi_irqdispatch();
+ return IRQ_HANDLED;
}
#ifdef CONFIG_MIPS_MT_SMP
@@ -312,13 +208,6 @@ static void ipi_call_dispatch(void)
do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-#ifdef CONFIG_MIPS_GIC_IPI
-
-#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3
-#define GIC_MIPS_CPU_IPI_CALL_IRQ 4
-
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
#ifdef CONFIG_MIPS_VPE_APSP_API_CMP
@@ -349,31 +238,16 @@ static struct irqaction irq_call = {
.flags = IRQF_PERCPU,
.name = "IPI_call"
};
-#endif /* CONFIG_MIPS_GIC_IPI */
-
-static int gic_resched_int_base;
-static int gic_call_int_base;
-#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
-#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
-
-unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
-{
- return GIC_CALL_INT(cpu);
-}
-
-unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
-{
- return GIC_RESCHED_INT(cpu);
-}
+#endif /* CONFIG_MIPS_MT_SMP */
static struct irqaction i8259irq = {
- .handler = no_action,
+ .handler = i8259_handler,
.name = "XT-PIC cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction corehi_irqaction = {
- .handler = no_action,
+ .handler = corehi_handler,
.name = "CoreHi",
.flags = IRQF_NO_THREAD,
};
@@ -399,60 +273,6 @@ static msc_irqmap_t msc_eicirqmap[] __initdata = {
static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
-/*
- * This GIC specific tabular array defines the association between External
- * Interrupts and CPUs/Core Interrupts. The nature of the External
- * Interrupts is also defined here - polarity/trigger.
- */
-
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-#define X GIC_UNUSED
-
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { X, X, X, X, 0 },
- /* The remainder of this table is initialised by fill_ipi_map */
-};
-#undef X
-
-#ifdef CONFIG_MIPS_GIC_IPI
-static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
-{
- int intr = baseintr + cpu;
- gic_intr_map[intr].cpunum = cpu;
- gic_intr_map[intr].pin = cpupin;
- gic_intr_map[intr].polarity = GIC_POL_POS;
- gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
- gic_intr_map[intr].flags = 0;
- ipi_map[cpu] |= (1 << (cpupin + 2));
- bitmap_set(ipi_ints, intr, 1);
-}
-
-static void __init fill_ipi_map(void)
-{
- int cpu;
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
- fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
- fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
- }
-}
-#endif
-
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
setup_irq(irq, action);
@@ -461,6 +281,8 @@ void __init arch_init_ipiirq(int irq, struct irqaction *action)
void __init arch_init_irq(void)
{
+ int corehi_irq, i8259_irq;
+
init_i8259_irqs();
if (!cpu_has_veic)
@@ -471,12 +293,12 @@ void __init arch_init_irq(void)
gic_present = 1;
} else {
if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
- _msc01_biu_base = (unsigned long)
- ioremap_nocache(MSC01_BIU_REG_BASE,
+ _msc01_biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
MSC01_BIU_ADDRSPACE_SZ);
- gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
- MSC01_SC_CFG_GICPRES_MSK) >>
- MSC01_SC_CFG_GICPRES_SHF;
+ gic_present =
+ (__raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS) &
+ MSC01_SC_CFG_GICPRES_MSK) >>
+ MSC01_SC_CFG_GICPRES_SHF;
}
}
if (gic_present)
@@ -507,63 +329,20 @@ void __init arch_init_irq(void)
msc_nr_irqs);
}
- if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
- set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
- setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
- setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
- } else if (cpu_has_vint) {
- set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
- set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
- &corehi_irqaction);
- } else {
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
- &corehi_irqaction);
- }
-
if (gic_present) {
- /* FIXME */
int i;
-#if defined(CONFIG_MIPS_GIC_IPI)
- gic_call_int_base = GIC_NUM_INTRS -
- (NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
- gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
- fill_ipi_map();
-#endif
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
+ MIPS_GIC_IRQ_BASE);
if (!mips_cm_present()) {
/* Enable the GIC */
- i = REG(_msc01_biu_base, MSC01_SC_CFG);
- REG(_msc01_biu_base, MSC01_SC_CFG) =
- (i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
+ i = __raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS);
+ __raw_writel(i | (0x1 << MSC01_SC_CFG_GICENA_SHF),
+ _msc01_biu_base + MSC01_SC_CFG_OFS);
pr_debug("GIC Enabled\n");
}
-#if defined(CONFIG_MIPS_GIC_IPI)
- /* set up ipi interrupts */
- if (cpu_has_vint) {
- set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
- set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
- }
- /* Argh.. this really needs sorting out.. */
- pr_info("CPU%d: status register was %08x\n",
- smp_processor_id(), read_c0_status());
- write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
- pr_info("CPU%d: status register now %08x\n",
- smp_processor_id(), read_c0_status());
- write_c0_status(0x1100dc00);
- pr_info("CPU%d: status register frc %08x\n",
- smp_processor_id(), read_c0_status());
- for (i = 0; i < nr_cpu_ids; i++) {
- arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
- GIC_RESCHED_INT(i), &irq_resched);
- arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
- GIC_CALL_INT(i), &irq_call);
- }
-#endif
+ i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
+ corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
} else {
#if defined(CONFIG_MIPS_MT_SMP)
/* set up ipi interrupts */
@@ -573,12 +352,6 @@ void __init arch_init_irq(void)
cpu_ipi_resched_irq = MSC01E_INT_SW0;
cpu_ipi_call_irq = MSC01E_INT_SW1;
} else {
- if (cpu_has_vint) {
- set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ,
- ipi_resched_dispatch);
- set_vi_handler (MIPS_CPU_IPI_CALL_IRQ,
- ipi_call_dispatch);
- }
cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
@@ -587,7 +360,21 @@ void __init arch_init_irq(void)
arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_I8259A,
+ malta_hw0_irqdispatch);
+ set_vi_handler(MSC01E_INT_COREHI,
+ corehi_irqdispatch);
+ i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
+ corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
+ } else {
+ i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
+ corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
+ }
}
+
+ setup_irq(i8259_irq, &i8259irq);
+ setup_irq(corehi_irq, &corehi_irqaction);
}
void malta_be_init(void)
@@ -714,37 +501,3 @@ int malta_be_handler(struct pt_regs *regs, int is_fixup)
return retval;
}
-
-void gic_enable_interrupt(int irq_vec)
-{
- GIC_SET_INTR_MASK(irq_vec);
-}
-
-void gic_disable_interrupt(int irq_vec)
-{
- GIC_CLR_INTR_MASK(irq_vec);
-}
-
-void gic_irq_ack(struct irq_data *d)
-{
- int irq = (d->irq - gic_irq_base);
-
- GIC_CLR_INTR_MASK(irq);
-
- if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
- GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
-}
-
-void gic_finish_irq(struct irq_data *d)
-{
- /* Enable interrupts. */
- GIC_SET_INTR_MASK(d->irq - gic_irq_base);
-}
-
-void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
-{
- int i;
-
- for (i = gic_irq_base; i < (gic_irq_base + irqs); i++)
- irq_set_chip(i, irq_controller);
-}
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 3778a359f3ad..ce02dbdedc62 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/timex.h>
#include <linux/mc146818rtc.h>
@@ -37,7 +38,6 @@
#include <asm/time.h>
#include <asm/mc146818-time.h>
#include <asm/msc01_ic.h>
-#include <asm/gic.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/maltaint.h>
@@ -46,6 +46,8 @@ static int mips_cpu_timer_irq;
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
+static unsigned int gic_frequency;
+
static void mips_timer_dispatch(void)
{
do_IRQ(mips_cpu_timer_irq);
@@ -70,9 +72,7 @@ static void __init estimate_frequencies(void)
{
unsigned long flags;
unsigned int count, start;
-#ifdef CONFIG_IRQ_GIC
- unsigned int giccount = 0, gicstart = 0;
-#endif
+ cycle_t giccount = 0, gicstart = 0;
#if defined(CONFIG_KVM_GUEST) && CONFIG_KVM_GUEST_TIMER_FREQ
mips_hpt_frequency = CONFIG_KVM_GUEST_TIMER_FREQ * 1000000;
@@ -87,32 +87,26 @@ static void __init estimate_frequencies(void)
/* Initialize counters. */
start = read_c0_count();
-#ifdef CONFIG_IRQ_GIC
if (gic_present)
- GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
-#endif
+ gicstart = gic_read_count();
/* Read counter exactly on falling edge of update flag. */
while (CMOS_READ(RTC_REG_A) & RTC_UIP);
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
count = read_c0_count();
-#ifdef CONFIG_IRQ_GIC
if (gic_present)
- GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
-#endif
+ giccount = gic_read_count();
local_irq_restore(flags);
count -= start;
mips_hpt_frequency = count;
-#ifdef CONFIG_IRQ_GIC
if (gic_present) {
giccount -= gicstart;
gic_frequency = giccount;
}
-#endif
}
void read_persistent_clock(struct timespec *ts)
@@ -121,35 +115,30 @@ void read_persistent_clock(struct timespec *ts)
ts->tv_nsec = 0;
}
-static void __init plat_perf_setup(void)
+int get_c0_perfcount_int(void)
{
-#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
- } else
-#endif
- if (cp0_perfcount_irq >= 0) {
- if (cpu_has_vint)
- set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
+ } else if (gic_present) {
+ mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+ } else if (cp0_perfcount_irq >= 0) {
mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-#ifdef CONFIG_SMP
- irq_set_handler(mips_cpu_perf_irq, handle_percpu_irq);
-#endif
+ } else {
+ mips_cpu_perf_irq = -1;
}
+
+ return mips_cpu_perf_irq;
}
unsigned int get_c0_compare_int(void)
{
-#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- } else
-#endif
- {
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ } else if (gic_present) {
+ mips_cpu_timer_irq = gic_get_c0_compare_int();
+ } else {
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
@@ -191,16 +180,14 @@ void __init plat_time_init(void)
setup_pit_timer();
#endif
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present) {
freq = freqround(gic_frequency, 5000);
printk("GIC frequency %d.%02d MHz\n", freq/1000000,
(freq%1000000)*100/1000000);
-#ifdef CONFIG_CSRC_GIC
+#ifdef CONFIG_CLKSRC_MIPS_GIC
gic_clocksource_init(gic_frequency);
#endif
}
#endif
-
- plat_perf_setup();
}
diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c
index 772fc056a92d..014dd7ba4d68 100644
--- a/arch/mips/mti-sead3/sead3-ehci.c
+++ b/arch/mips/mti-sead3/sead3-ehci.c
@@ -9,6 +9,9 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/irqchip/mips-gic.h>
+
+#include <asm/mips-boards/sead3int.h>
struct resource ehci_resources[] = {
{
@@ -17,7 +20,6 @@ struct resource ehci_resources[] = {
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 2,
.flags = IORESOURCE_IRQ
}
};
@@ -37,6 +39,10 @@ static struct platform_device ehci_device = {
static int __init ehci_init(void)
{
+ if (gic_present)
+ ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
+ else
+ ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
return platform_device_register(&ehci_device);
}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
index 6a560ac03def..e31e17f81eef 100644
--- a/arch/mips/mti-sead3/sead3-int.c
+++ b/arch/mips/mti-sead3/sead3-int.c
@@ -7,9 +7,9 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/io.h>
-#include <asm/gic.h>
#include <asm/irq_cpu.h>
#include <asm/setup.h>
@@ -20,138 +20,23 @@
#define SEAD_CONFIG_BASE 0x1b100110
#define SEAD_CONFIG_SIZE 4
-static unsigned long sead3_config_reg;
-
-/*
- * This table defines the setup for each external GIC interrupt. It is
- * indexed by interrupt number.
- */
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
- int irq;
-
- irq = (fls(pending) - CAUSEB_IP - 1);
- if (irq >= 0)
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
- else
- spurious_interrupt();
-}
+static void __iomem *sead3_config_reg;
void __init arch_init_irq(void)
{
- int i;
-
- if (!cpu_has_veic) {
+ if (!cpu_has_veic)
mips_cpu_irq_init();
- if (cpu_has_vint) {
- /* install generic handler */
- for (i = 0; i < 8; i++)
- set_vi_handler(i, plat_irq_dispatch);
- }
- }
-
- sead3_config_reg = (unsigned long)ioremap_nocache(SEAD_CONFIG_BASE,
- SEAD_CONFIG_SIZE);
- gic_present = (REG32(sead3_config_reg) & SEAD_CONFIG_GIC_PRESENT_MSK) >>
+ sead3_config_reg = ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
+ gic_present = (__raw_readl(sead3_config_reg) &
+ SEAD_CONFIG_GIC_PRESENT_MSK) >>
SEAD_CONFIG_GIC_PRESENT_SHF;
pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
pr_info("EIC: %s\n",
(current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
if (gic_present)
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
-}
-
-void gic_enable_interrupt(int irq_vec)
-{
- unsigned int i, irq_source;
-
- /* enable all the interrupts associated with this vector */
- for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
- GIC_SET_INTR_MASK(irq_source);
- }
- /* enable all local interrupts associated with this vector */
- if (gic_shared_intr_map[irq_vec].local_intr_mask) {
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_SMASK),
- gic_shared_intr_map[irq_vec].local_intr_mask);
- }
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
+ MIPS_GIC_IRQ_BASE);
}
-void gic_disable_interrupt(int irq_vec)
-{
- unsigned int i, irq_source;
-
- /* disable all the interrupts associated with this vector */
- for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
- GIC_CLR_INTR_MASK(irq_source);
- }
- /* disable all local interrupts associated with this vector */
- if (gic_shared_intr_map[irq_vec].local_intr_mask) {
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
- GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_RMASK),
- gic_shared_intr_map[irq_vec].local_intr_mask);
- }
-}
-
-void gic_irq_ack(struct irq_data *d)
-{
- GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
-}
-
-void gic_finish_irq(struct irq_data *d)
-{
- unsigned int irq = (d->irq - gic_irq_base);
- unsigned int i, irq_source;
-
- /* Clear edge detectors. */
- for (i = 0; i < gic_shared_intr_map[irq].num_shared_intr; i++) {
- irq_source = gic_shared_intr_map[irq].intr_list[i];
- if (gic_irq_flags[irq_source] & GIC_TRIG_EDGE)
- GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq_source);
- }
-
- /* Enable interrupts. */
- GIC_SET_INTR_MASK(irq);
-}
-
-void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
-{
- int i;
-
- /*
- * For non-EIC mode, we want to setup the GIC in pass-through
- * mode, as if the GIC didn't exist. Do not map any interrupts
- * for an external interrupt controller.
- */
- if (!cpu_has_veic)
- return;
-
- for (i = gic_irq_base; i < (gic_irq_base + irqs); i++)
- irq_set_chip_and_handler(i, irq_controller, handle_percpu_irq);
-}
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
index dd11e7eb771c..46176b804576 100644
--- a/arch/mips/mti-sead3/sead3-net.c
+++ b/arch/mips/mti-sead3/sead3-net.c
@@ -7,9 +7,12 @@
*/
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
+#include <asm/mips-boards/sead3int.h>
+
static struct smsc911x_platform_config sead3_smsc911x_data = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
@@ -17,14 +20,13 @@ static struct smsc911x_platform_config sead3_smsc911x_data = {
.phy_interface = PHY_INTERFACE_MODE_MII,
};
-struct resource sead3_net_resourcess[] = {
+struct resource sead3_net_resources[] = {
{
.start = 0x1f010000,
.end = 0x1f01ffff,
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 6,
.flags = IORESOURCE_IRQ
}
};
@@ -35,12 +37,16 @@ static struct platform_device sead3_net_device = {
.dev = {
.platform_data = &sead3_smsc911x_data,
},
- .num_resources = ARRAY_SIZE(sead3_net_resourcess),
- .resource = sead3_net_resourcess
+ .num_resources = ARRAY_SIZE(sead3_net_resources),
+ .resource = sead3_net_resources
};
static int __init sead3_net_init(void)
{
+ if (gic_present)
+ sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
+ else
+ sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
return platform_device_register(&sead3_net_device);
}
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index 6c3b33dbed18..53ee6f1f018d 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -7,12 +7,15 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
#include <linux/serial_8250.h>
-#define UART(base, int) \
+#include <asm/mips-boards/sead3int.h>
+
+#define UART(base) \
{ \
.mapbase = base, \
- .irq = int, \
+ .irq = -1, \
.uartclk = 14745600, \
.iotype = UPIO_MEM32, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
@@ -20,8 +23,8 @@
}
static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
+ UART(0x1f000900), /* ttyS0 = USB */
+ UART(0x1f000800), /* ttyS1 = RS232 */
{ },
};
@@ -35,6 +38,13 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
+ if (gic_present) {
+ uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
+ uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
+ } else {
+ uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
+ uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
+ }
return platform_device_register(&uart8250_device);
}
diff --git a/arch/mips/mti-sead3/sead3-serial.c b/arch/mips/mti-sead3/sead3-serial.c
deleted file mode 100644
index bc52705bbee4..000000000000
--- a/arch/mips/mti-sead3/sead3-serial.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define UART(base, int) \
-{ \
- .mapbase = base, \
- .irq = int, \
- .uartclk = 14745600, \
- .iotype = UPIO_MEM32, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
- .regshift = 2, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static int __init uart8250_init(void)
-{
- return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the SEAD-3 platform");
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index 678d03d53c60..ec1dd2491f96 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -6,6 +6,7 @@
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
#include <asm/cpu.h>
#include <asm/setup.h>
@@ -13,19 +14,6 @@
#include <asm/irq.h>
#include <asm/mips-boards/generic.h>
-static int mips_cpu_timer_irq;
-static int mips_cpu_perf_irq;
-
-static void mips_timer_dispatch(void)
-{
- do_IRQ(mips_cpu_timer_irq);
-}
-
-static void mips_perf_dispatch(void)
-{
- do_IRQ(mips_cpu_perf_irq);
-}
-
static void __iomem *status_reg = (void __iomem *)0xbf000410;
/*
@@ -81,21 +69,20 @@ void read_persistent_clock(struct timespec *ts)
ts->tv_nsec = 0;
}
-static void __init plat_perf_setup(void)
+int get_c0_perfcount_int(void)
{
- if (cp0_perfcount_irq >= 0) {
- if (cpu_has_vint)
- set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
- mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- }
+ if (gic_present)
+ return gic_get_c0_compare_int();
+ if (cp0_perfcount_irq >= 0)
+ return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ return -1;
}
unsigned int get_c0_compare_int(void)
{
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
- return mips_cpu_timer_irq;
+ if (gic_present)
+ return gic_get_c0_compare_int();
+ return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
void __init plat_time_init(void)
@@ -108,6 +95,4 @@ void __init plat_time_init(void)
(est_freq % 1000000) * 100 / 1000000);
mips_scroll_message();
-
- plat_perf_setup();
}
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
index 9c0a6782c091..070afdb297df 100644
--- a/arch/mips/oprofile/Makefile
+++ b/arch/mips/oprofile/Makefile
@@ -14,3 +14,4 @@ oprofile-$(CONFIG_CPU_R10000) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_XLR) += op_model_mipsxx.o
oprofile-$(CONFIG_CPU_LOONGSON2) += op_model_loongson2.o
+oprofile-$(CONFIG_CPU_LOONGSON3) += op_model_loongson3.o
diff --git a/arch/mips/oprofile/backtrace.c b/arch/mips/oprofile/backtrace.c
index 83a1dfd8f0e3..5e645c9a3162 100644
--- a/arch/mips/oprofile/backtrace.c
+++ b/arch/mips/oprofile/backtrace.c
@@ -65,7 +65,7 @@ static inline int is_end_of_function_marker(union mips_instruction *ip)
* - handle cases where the stack is adjusted inside a function
* (generally doesn't happen)
* - find optimal value for max_instr_check
- * - try to find a way to handle leaf functions
+ * - try to find a better way to handle leaf functions
*/
static inline int unwind_user_frame(struct stackframe *old_frame,
@@ -104,7 +104,7 @@ static inline int unwind_user_frame(struct stackframe *old_frame,
}
if (!ra_offset || !stack_size)
- return -1;
+ goto done;
if (ra_offset) {
new_frame.ra = old_frame->sp + ra_offset;
@@ -121,6 +121,7 @@ static inline int unwind_user_frame(struct stackframe *old_frame,
if (new_frame.sp > old_frame->sp)
return -2;
+done:
new_frame.pc = old_frame->ra;
*old_frame = new_frame;
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index e74732449478..a26cbe372e06 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -18,6 +18,7 @@
extern struct op_mips_model op_model_mipsxx_ops __weak;
extern struct op_mips_model op_model_loongson2_ops __weak;
+extern struct op_mips_model op_model_loongson3_ops __weak;
static struct op_mips_model *model;
@@ -104,8 +105,17 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_LOONGSON2:
lmodel = &op_model_loongson2_ops;
break;
+ case CPU_LOONGSON3:
+ lmodel = &op_model_loongson3_ops;
+ break;
};
+ /*
+ * Always set the backtrace. This allows unsupported CPU types to still
+ * use timer-based oprofile.
+ */
+ ops->backtrace = op_mips_backtrace;
+
if (!lmodel)
return -ENODEV;
@@ -121,7 +131,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->start = op_mips_start;
ops->stop = op_mips_stop;
ops->cpu_type = lmodel->cpu_type;
- ops->backtrace = op_mips_backtrace;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
lmodel->cpu_type);
diff --git a/arch/mips/oprofile/op_model_loongson3.c b/arch/mips/oprofile/op_model_loongson3.c
new file mode 100644
index 000000000000..8bcf7fc40f0d
--- /dev/null
+++ b/arch/mips/oprofile/op_model_loongson3.c
@@ -0,0 +1,220 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/proc_fs.h>
+#include <linux/oprofile.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+#include <irq.h>
+#include <loongson.h>
+#include "op_impl.h"
+
+#define LOONGSON3_PERFCNT_OVERFLOW (1ULL << 63)
+
+#define LOONGSON3_PERFCTRL_EXL (1UL << 0)
+#define LOONGSON3_PERFCTRL_KERNEL (1UL << 1)
+#define LOONGSON3_PERFCTRL_SUPERVISOR (1UL << 2)
+#define LOONGSON3_PERFCTRL_USER (1UL << 3)
+#define LOONGSON3_PERFCTRL_ENABLE (1UL << 4)
+#define LOONGSON3_PERFCTRL_W (1UL << 30)
+#define LOONGSON3_PERFCTRL_M (1UL << 31)
+#define LOONGSON3_PERFCTRL_EVENT(idx, event) \
+ (((event) & (idx ? 0x0f : 0x3f)) << 5)
+
+/* Loongson-3 PerfCount performance counter1 register */
+#define read_c0_perflo1() __read_64bit_c0_register($25, 0)
+#define write_c0_perflo1(val) __write_64bit_c0_register($25, 0, val)
+#define read_c0_perfhi1() __read_64bit_c0_register($25, 1)
+#define write_c0_perfhi1(val) __write_64bit_c0_register($25, 1, val)
+
+/* Loongson-3 PerfCount performance counter2 register */
+#define read_c0_perflo2() __read_64bit_c0_register($25, 2)
+#define write_c0_perflo2(val) __write_64bit_c0_register($25, 2, val)
+#define read_c0_perfhi2() __read_64bit_c0_register($25, 3)
+#define write_c0_perfhi2(val) __write_64bit_c0_register($25, 3, val)
+
+static int (*save_perf_irq)(void);
+
+static struct loongson3_register_config {
+ unsigned int control1;
+ unsigned int control2;
+ unsigned long long reset_counter1;
+ unsigned long long reset_counter2;
+ int ctr1_enable, ctr2_enable;
+} reg;
+
+static void reset_counters(void *arg)
+{
+ write_c0_perfhi1(0);
+ write_c0_perfhi2(0);
+ write_c0_perflo1(0xc0000000);
+ write_c0_perflo2(0x40000000);
+}
+
+/* Compute all of the registers in preparation for enabling profiling. */
+static void loongson3_reg_setup(struct op_counter_config *ctr)
+{
+ unsigned int control1 = 0;
+ unsigned int control2 = 0;
+
+ reg.reset_counter1 = 0;
+ reg.reset_counter2 = 0;
+ /* Compute the performance counter control word. */
+ /* For now count kernel and user mode */
+ if (ctr[0].enabled) {
+ control1 |= LOONGSON3_PERFCTRL_EVENT(0, ctr[0].event) |
+ LOONGSON3_PERFCTRL_ENABLE;
+ if (ctr[0].kernel)
+ control1 |= LOONGSON3_PERFCTRL_KERNEL;
+ if (ctr[0].user)
+ control1 |= LOONGSON3_PERFCTRL_USER;
+ reg.reset_counter1 = 0x8000000000000000ULL - ctr[0].count;
+ }
+
+ if (ctr[1].enabled) {
+ control2 |= LOONGSON3_PERFCTRL_EVENT(1, ctr[1].event) |
+ LOONGSON3_PERFCTRL_ENABLE;
+ if (ctr[1].kernel)
+ control2 |= LOONGSON3_PERFCTRL_KERNEL;
+ if (ctr[1].user)
+ control2 |= LOONGSON3_PERFCTRL_USER;
+ reg.reset_counter2 = 0x8000000000000000ULL - ctr[1].count;
+ }
+
+ if (ctr[0].enabled)
+ control1 |= LOONGSON3_PERFCTRL_EXL;
+ if (ctr[1].enabled)
+ control2 |= LOONGSON3_PERFCTRL_EXL;
+
+ reg.control1 = control1;
+ reg.control2 = control2;
+ reg.ctr1_enable = ctr[0].enabled;
+ reg.ctr2_enable = ctr[1].enabled;
+}
+
+/* Program all of the registers in preparation for enabling profiling. */
+static void loongson3_cpu_setup(void *args)
+{
+ uint64_t perfcount1, perfcount2;
+
+ perfcount1 = reg.reset_counter1;
+ perfcount2 = reg.reset_counter2;
+ write_c0_perfhi1(perfcount1);
+ write_c0_perfhi2(perfcount2);
+}
+
+static void loongson3_cpu_start(void *args)
+{
+ /* Start all counters on current CPU */
+ reg.control1 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
+ reg.control2 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
+
+ if (reg.ctr1_enable)
+ write_c0_perflo1(reg.control1);
+ if (reg.ctr2_enable)
+ write_c0_perflo2(reg.control2);
+}
+
+static void loongson3_cpu_stop(void *args)
+{
+ /* Stop all counters on current CPU */
+ write_c0_perflo1(0xc0000000);
+ write_c0_perflo2(0x40000000);
+ memset(&reg, 0, sizeof(reg));
+}
+
+static int loongson3_perfcount_handler(void)
+{
+ unsigned long flags;
+ uint64_t counter1, counter2;
+ uint32_t cause, handled = IRQ_NONE;
+ struct pt_regs *regs = get_irq_regs();
+
+ cause = read_c0_cause();
+ if (!(cause & CAUSEF_PCI))
+ return handled;
+
+ counter1 = read_c0_perfhi1();
+ counter2 = read_c0_perfhi2();
+
+ local_irq_save(flags);
+
+ if (counter1 & LOONGSON3_PERFCNT_OVERFLOW) {
+ if (reg.ctr1_enable)
+ oprofile_add_sample(regs, 0);
+ counter1 = reg.reset_counter1;
+ }
+ if (counter2 & LOONGSON3_PERFCNT_OVERFLOW) {
+ if (reg.ctr2_enable)
+ oprofile_add_sample(regs, 1);
+ counter2 = reg.reset_counter2;
+ }
+
+ local_irq_restore(flags);
+
+ write_c0_perfhi1(counter1);
+ write_c0_perfhi2(counter2);
+
+ if (!(cause & CAUSEF_TI))
+ handled = IRQ_HANDLED;
+
+ return handled;
+}
+
+static int loongson3_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ switch (action) {
+ case CPU_STARTING:
+ case CPU_STARTING_FROZEN:
+ write_c0_perflo1(reg.control1);
+ write_c0_perflo2(reg.control2);
+ break;
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ write_c0_perflo1(0xc0000000);
+ write_c0_perflo2(0x40000000);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block loongson3_notifier_block = {
+ .notifier_call = loongson3_cpu_callback
+};
+
+static int __init loongson3_init(void)
+{
+ on_each_cpu(reset_counters, NULL, 1);
+ register_hotcpu_notifier(&loongson3_notifier_block);
+ save_perf_irq = perf_irq;
+ perf_irq = loongson3_perfcount_handler;
+
+ return 0;
+}
+
+static void loongson3_exit(void)
+{
+ on_each_cpu(reset_counters, NULL, 1);
+ unregister_hotcpu_notifier(&loongson3_notifier_block);
+ perf_irq = save_perf_irq;
+}
+
+struct op_mips_model op_model_loongson3_ops = {
+ .reg_setup = loongson3_reg_setup,
+ .cpu_setup = loongson3_cpu_setup,
+ .init = loongson3_init,
+ .exit = loongson3_exit,
+ .cpu_start = loongson3_cpu_start,
+ .cpu_stop = loongson3_cpu_stop,
+ .cpu_type = "mips/loongson3",
+ .num_counters = 2
+};
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 42821ae2d77e..01f721a85c5b 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <asm/irq_regs.h>
+#include <asm/time.h>
#include "op_impl.h"
@@ -35,6 +36,7 @@
#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13)
static int (*save_perf_irq)(void);
+static int perfcount_irq;
/*
* XLR has only one set of counters per core. Designate the
@@ -431,8 +433,16 @@ static int __init mipsxx_init(void)
save_perf_irq = perf_irq;
perf_irq = mipsxx_perfcount_handler;
- if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
- return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
+ if (get_c0_perfcount_int)
+ perfcount_irq = get_c0_perfcount_int();
+ else if ((cp0_perfcount_irq >= 0) &&
+ (cp0_compare_irq != cp0_perfcount_irq))
+ perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ perfcount_irq = -1;
+
+ if (perfcount_irq >= 0)
+ return request_irq(perfcount_irq, mipsxx_perfcount_int,
0, "Perfcounter", save_perf_irq);
return 0;
@@ -442,8 +452,8 @@ static void mipsxx_exit(void)
{
int counters = op_model_mipsxx_ops.num_counters;
- if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
- free_irq(cp0_perfcount_irq, save_perf_irq);
+ if (perfcount_irq >= 0)
+ free_irq(perfcount_irq, save_perf_irq);
counters = counters_per_cpu_to_total(counters);
on_each_cpu(reset_counters, (void *)(long)counters, 1);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 6523d558ff5a..300591c6278d 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 13eea696bbe7..d02eb9d16b55 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -469,7 +469,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
{
switch (bus->number) {
case PCIE_BUS_BRIDGE:
- return (PCI_SLOT(devfn) == 0);
+ return PCI_SLOT(devfn) == 0;
case PCIE_BUS_DEVICE:
if (PCI_SLOT(devfn) == 0)
return bcm_pcie_readl(PCIE_DLSTATUS_REG)
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a1a7c9f4096e..b9d1fd0ff7e2 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -13,8 +13,6 @@
volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-static DEFINE_SPINLOCK(nile4_pci_lock);
-
static int nile4_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn, int where, u32 *val)
{
@@ -76,7 +74,6 @@ static int nile4_pcibios_config_access(unsigned char access_type,
static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
- unsigned long flags;
u32 data = 0;
int err;
@@ -85,11 +82,8 @@ static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
else if ((size == 4) && (where & 3))
return PCIBIOS_BAD_REGISTER_NUMBER;
- spin_lock_irqsave(&nile4_pci_lock, flags);
err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- spin_unlock_irqrestore(&nile4_pci_lock, flags);
-
+ &data);
if (err)
return err;
@@ -106,7 +100,6 @@ static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- unsigned long flags;
u32 data = 0;
int err;
@@ -115,11 +108,8 @@ static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
else if ((size == 4) && (where & 3))
return PCIBIOS_BAD_REGISTER_NUMBER;
- spin_lock_irqsave(&nile4_pci_lock, flags);
err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
&data);
- spin_unlock_irqrestore(&nile4_pci_lock, flags);
-
if (err)
return err;
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 50034f985be1..dd2d9f7e9412 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -193,8 +193,6 @@ static void pci_proc_init(void)
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-static DEFINE_SPINLOCK(bpci_lock);
-
/*****************************************************************************
*
* STRUCT: pci_io_resource
@@ -368,7 +366,6 @@ int msp_pcibios_config_access(unsigned char access_type,
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned char bus_num = bus->number;
unsigned char dev_fn = (unsigned char)devfn;
- unsigned long flags;
unsigned long intr;
unsigned long value;
static char pciirqflag;
@@ -401,10 +398,7 @@ int msp_pcibios_config_access(unsigned char access_type,
}
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- local_irq_save(flags);
vpe_status = dvpe();
-#else
- spin_lock_irqsave(&bpci_lock, flags);
#endif
/*
@@ -457,9 +451,6 @@ int msp_pcibios_config_access(unsigned char access_type,
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
- local_irq_restore(flags);
-#else
- spin_unlock_irqrestore(&bpci_lock, flags);
#endif
return -1;
@@ -467,9 +458,6 @@ int msp_pcibios_config_access(unsigned char access_type,
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
evpe(vpe_status);
- local_irq_restore(flags);
-#else
- spin_unlock_irqrestore(&bpci_lock, flags);
#endif
return PCIBIOS_SUCCESSFUL;
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
new file mode 100644
index 000000000000..bd2b3b60da83
--- /dev/null
+++ b/arch/mips/pci/pci-ar2315.c
@@ -0,0 +1,511 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA
+ * and interrupt. PCI interface supports MMIO access method, but does not
+ * seem to support I/O ports.
+ *
+ * Read/write operation in the region 0x80000000-0xBFFFFFFF causes
+ * a memory read/write command on the PCI bus. 30 LSBs of address on
+ * the bus are taken from memory read/write request and 2 MSBs are
+ * determined by PCI unit configuration.
+ *
+ * To work with the configuration space instead of memory is necessary set
+ * the CFG_SEL bit in the PCI_MISC_CONFIG register.
+ *
+ * Devices on the bus can perform DMA requests via chip BAR1. PCI host
+ * controller BARs are programmend as if an external device is programmed.
+ * Which means that during configuration, IDSEL pin of the chip should be
+ * asserted.
+ *
+ * We know (and support) only one board that uses the PCI interface -
+ * Fonera 2.0g (FON2202). It has a USB EHCI controller connected to the
+ * AR2315 PCI bus. IDSEL pin of USB controller is connected to AD[13] line
+ * and IDSEL pin of AR2315 is connected to AD[16] line.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <asm/paccess.h>
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR2315_PCI_1MS_REG 0x0008
+
+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR2315_PCI_MISC_CONFIG 0x000c
+
+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* Mem or Config cycles */
+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
+#define AR2315_PCIMISC_RST_MODE 0x00000030
+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache
+ * disable */
+
+#define AR2315_PCI_OUT_TSTAMP 0x0010
+
+#define AR2315_PCI_UNCACHE_CFG 0x0014
+
+#define AR2315_PCI_IN_EN 0x0100
+
+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
+
+#define AR2315_PCI_IN_DIS 0x0104
+
+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
+
+#define AR2315_PCI_IN_PTR 0x0200
+
+#define AR2315_PCI_OUT_EN 0x0400
+
+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
+
+#define AR2315_PCI_OUT_DIS 0x0404
+
+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
+
+#define AR2315_PCI_OUT_PTR 0x0408
+
+/* PCI interrupt status (write one to clear) */
+#define AR2315_PCI_ISR 0x0500
+
+#define AR2315_PCI_INT_TX 0x00000001 /* Desc In Completed */
+#define AR2315_PCI_INT_TXOK 0x00000002 /* Desc In OK */
+#define AR2315_PCI_INT_TXERR 0x00000004 /* Desc In ERR */
+#define AR2315_PCI_INT_TXEOL 0x00000008 /* Desc In End-of-List */
+#define AR2315_PCI_INT_RX 0x00000010 /* Desc Out Completed */
+#define AR2315_PCI_INT_RXOK 0x00000020 /* Desc Out OK */
+#define AR2315_PCI_INT_RXERR 0x00000040 /* Desc Out ERR */
+#define AR2315_PCI_INT_RXEOL 0x00000080 /* Desc Out EOL */
+#define AR2315_PCI_INT_TXOOD 0x00000200 /* Desc In Out-of-Desc */
+#define AR2315_PCI_INT_DESCMASK 0x0000FFFF /* Desc Mask */
+#define AR2315_PCI_INT_EXT 0x02000000 /* Extern PCI INTA */
+#define AR2315_PCI_INT_ABORT 0x04000000 /* PCI bus abort event */
+
+/* PCI interrupt mask */
+#define AR2315_PCI_IMR 0x0504
+
+/* Global PCI interrupt enable */
+#define AR2315_PCI_IER 0x0508
+
+#define AR2315_PCI_IER_DISABLE 0x00 /* disable pci interrupts */
+#define AR2315_PCI_IER_ENABLE 0x01 /* enable pci interrupts */
+
+#define AR2315_PCI_HOST_IN_EN 0x0800
+#define AR2315_PCI_HOST_IN_DIS 0x0804
+#define AR2315_PCI_HOST_IN_PTR 0x0810
+#define AR2315_PCI_HOST_OUT_EN 0x0900
+#define AR2315_PCI_HOST_OUT_DIS 0x0904
+#define AR2315_PCI_HOST_OUT_PTR 0x0908
+
+/*
+ * PCI interrupts, which share IP5
+ * Keep ordered according to AR2315_PCI_INT_XXX bits
+ */
+#define AR2315_PCI_IRQ_EXT 25
+#define AR2315_PCI_IRQ_ABORT 26
+#define AR2315_PCI_IRQ_COUNT 27
+
+/* Arbitrary size of memory region to access the configuration space */
+#define AR2315_PCI_CFG_SIZE 0x00100000
+
+#define AR2315_PCI_HOST_SLOT 3
+#define AR2315_PCI_HOST_DEVID ((0xff18 << 16) | PCI_VENDOR_ID_ATHEROS)
+
+/* ??? access BAR */
+#define AR2315_PCI_HOST_MBAR0 0x10000000
+/* RAM access BAR */
+#define AR2315_PCI_HOST_MBAR1 AR2315_PCI_HOST_SDRAM_BASEADDR
+/* ??? access BAR */
+#define AR2315_PCI_HOST_MBAR2 0x30000000
+
+struct ar2315_pci_ctrl {
+ void __iomem *cfg_mem;
+ void __iomem *mmr_mem;
+ unsigned irq;
+ unsigned irq_ext;
+ struct irq_domain *domain;
+ struct pci_controller pci_ctrl;
+ struct resource mem_res;
+ struct resource io_res;
+};
+
+static inline struct ar2315_pci_ctrl *ar2315_pci_bus_to_apc(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ return container_of(hose, struct ar2315_pci_ctrl, pci_ctrl);
+}
+
+static inline u32 ar2315_pci_reg_read(struct ar2315_pci_ctrl *apc, u32 reg)
+{
+ return __raw_readl(apc->mmr_mem + reg);
+}
+
+static inline void ar2315_pci_reg_write(struct ar2315_pci_ctrl *apc, u32 reg,
+ u32 val)
+{
+ __raw_writel(val, apc->mmr_mem + reg);
+}
+
+static inline void ar2315_pci_reg_mask(struct ar2315_pci_ctrl *apc, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 ret = ar2315_pci_reg_read(apc, reg);
+
+ ret &= ~mask;
+ ret |= val;
+ ar2315_pci_reg_write(apc, reg, ret);
+}
+
+static int ar2315_pci_cfg_access(struct ar2315_pci_ctrl *apc, unsigned devfn,
+ int where, int size, u32 *ptr, bool write)
+{
+ int func = PCI_FUNC(devfn);
+ int dev = PCI_SLOT(devfn);
+ u32 addr = (1 << (13 + dev)) | (func << 8) | (where & ~3);
+ u32 mask = 0xffffffff >> 8 * (4 - size);
+ u32 sh = (where & 3) * 8;
+ u32 value, isr;
+
+ /* Prevent access past the remapped area */
+ if (addr >= AR2315_PCI_CFG_SIZE || dev > 18)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Clear pending errors */
+ ar2315_pci_reg_write(apc, AR2315_PCI_ISR, AR2315_PCI_INT_ABORT);
+ /* Select Configuration access */
+ ar2315_pci_reg_mask(apc, AR2315_PCI_MISC_CONFIG, 0,
+ AR2315_PCIMISC_CFG_SEL);
+
+ mb(); /* PCI must see space change before we begin */
+
+ value = __raw_readl(apc->cfg_mem + addr);
+
+ isr = ar2315_pci_reg_read(apc, AR2315_PCI_ISR);
+
+ if (isr & AR2315_PCI_INT_ABORT)
+ goto exit_err;
+
+ if (write) {
+ value = (value & ~(mask << sh)) | *ptr << sh;
+ __raw_writel(value, apc->cfg_mem + addr);
+ isr = ar2315_pci_reg_read(apc, AR2315_PCI_ISR);
+ if (isr & AR2315_PCI_INT_ABORT)
+ goto exit_err;
+ } else {
+ *ptr = (value >> sh) & mask;
+ }
+
+ goto exit;
+
+exit_err:
+ ar2315_pci_reg_write(apc, AR2315_PCI_ISR, AR2315_PCI_INT_ABORT);
+ if (!write)
+ *ptr = 0xffffffff;
+
+exit:
+ /* Select Memory access */
+ ar2315_pci_reg_mask(apc, AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL,
+ 0);
+
+ return isr & AR2315_PCI_INT_ABORT ? PCIBIOS_DEVICE_NOT_FOUND :
+ PCIBIOS_SUCCESSFUL;
+}
+
+static inline int ar2315_pci_local_cfg_rd(struct ar2315_pci_ctrl *apc,
+ unsigned devfn, int where, u32 *val)
+{
+ return ar2315_pci_cfg_access(apc, devfn, where, sizeof(u32), val,
+ false);
+}
+
+static inline int ar2315_pci_local_cfg_wr(struct ar2315_pci_ctrl *apc,
+ unsigned devfn, int where, u32 val)
+{
+ return ar2315_pci_cfg_access(apc, devfn, where, sizeof(u32), &val,
+ true);
+}
+
+static int ar2315_pci_cfg_read(struct pci_bus *bus, unsigned devfn, int where,
+ int size, u32 *value)
+{
+ struct ar2315_pci_ctrl *apc = ar2315_pci_bus_to_apc(bus);
+
+ if (PCI_SLOT(devfn) == AR2315_PCI_HOST_SLOT)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return ar2315_pci_cfg_access(apc, devfn, where, size, value, false);
+}
+
+static int ar2315_pci_cfg_write(struct pci_bus *bus, unsigned devfn, int where,
+ int size, u32 value)
+{
+ struct ar2315_pci_ctrl *apc = ar2315_pci_bus_to_apc(bus);
+
+ if (PCI_SLOT(devfn) == AR2315_PCI_HOST_SLOT)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return ar2315_pci_cfg_access(apc, devfn, where, size, &value, true);
+}
+
+static struct pci_ops ar2315_pci_ops = {
+ .read = ar2315_pci_cfg_read,
+ .write = ar2315_pci_cfg_write,
+};
+
+static int ar2315_pci_host_setup(struct ar2315_pci_ctrl *apc)
+{
+ unsigned devfn = PCI_DEVFN(AR2315_PCI_HOST_SLOT, 0);
+ int res;
+ u32 id;
+
+ res = ar2315_pci_local_cfg_rd(apc, devfn, PCI_VENDOR_ID, &id);
+ if (res != PCIBIOS_SUCCESSFUL || id != AR2315_PCI_HOST_DEVID)
+ return -ENODEV;
+
+ /* Program MBARs */
+ ar2315_pci_local_cfg_wr(apc, devfn, PCI_BASE_ADDRESS_0,
+ AR2315_PCI_HOST_MBAR0);
+ ar2315_pci_local_cfg_wr(apc, devfn, PCI_BASE_ADDRESS_1,
+ AR2315_PCI_HOST_MBAR1);
+ ar2315_pci_local_cfg_wr(apc, devfn, PCI_BASE_ADDRESS_2,
+ AR2315_PCI_HOST_MBAR2);
+
+ /* Run */
+ ar2315_pci_local_cfg_wr(apc, devfn, PCI_COMMAND, PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY |
+ PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
+
+ return 0;
+}
+
+static void ar2315_pci_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct ar2315_pci_ctrl *apc = irq_get_handler_data(irq);
+ u32 pending = ar2315_pci_reg_read(apc, AR2315_PCI_ISR) &
+ ar2315_pci_reg_read(apc, AR2315_PCI_IMR);
+ unsigned pci_irq = 0;
+
+ if (pending)
+ pci_irq = irq_find_mapping(apc->domain, __ffs(pending));
+
+ if (pci_irq)
+ generic_handle_irq(pci_irq);
+ else
+ spurious_interrupt();
+}
+
+static void ar2315_pci_irq_mask(struct irq_data *d)
+{
+ struct ar2315_pci_ctrl *apc = irq_data_get_irq_chip_data(d);
+
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IMR, BIT(d->hwirq), 0);
+}
+
+static void ar2315_pci_irq_mask_ack(struct irq_data *d)
+{
+ struct ar2315_pci_ctrl *apc = irq_data_get_irq_chip_data(d);
+ u32 m = BIT(d->hwirq);
+
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IMR, m, 0);
+ ar2315_pci_reg_write(apc, AR2315_PCI_ISR, m);
+}
+
+static void ar2315_pci_irq_unmask(struct irq_data *d)
+{
+ struct ar2315_pci_ctrl *apc = irq_data_get_irq_chip_data(d);
+
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IMR, 0, BIT(d->hwirq));
+}
+
+static struct irq_chip ar2315_pci_irq_chip = {
+ .name = "AR2315-PCI",
+ .irq_mask = ar2315_pci_irq_mask,
+ .irq_mask_ack = ar2315_pci_irq_mask_ack,
+ .irq_unmask = ar2315_pci_irq_unmask,
+};
+
+static int ar2315_pci_irq_map(struct irq_domain *d, unsigned irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &ar2315_pci_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, d->host_data);
+ return 0;
+}
+
+static struct irq_domain_ops ar2315_pci_irq_domain_ops = {
+ .map = ar2315_pci_irq_map,
+};
+
+static void ar2315_pci_irq_init(struct ar2315_pci_ctrl *apc)
+{
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IER, AR2315_PCI_IER_ENABLE, 0);
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IMR, (AR2315_PCI_INT_ABORT |
+ AR2315_PCI_INT_EXT), 0);
+
+ apc->irq_ext = irq_create_mapping(apc->domain, AR2315_PCI_IRQ_EXT);
+
+ irq_set_chained_handler(apc->irq, ar2315_pci_irq_handler);
+ irq_set_handler_data(apc->irq, apc);
+
+ /* Clear any pending Abort or external Interrupts
+ * and enable interrupt processing */
+ ar2315_pci_reg_write(apc, AR2315_PCI_ISR, AR2315_PCI_INT_ABORT |
+ AR2315_PCI_INT_EXT);
+ ar2315_pci_reg_mask(apc, AR2315_PCI_IER, 0, AR2315_PCI_IER_ENABLE);
+}
+
+static int ar2315_pci_probe(struct platform_device *pdev)
+{
+ struct ar2315_pci_ctrl *apc;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int irq, err;
+
+ apc = devm_kzalloc(dev, sizeof(*apc), GFP_KERNEL);
+ if (!apc)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
+ apc->irq = irq;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "ar2315-pci-ctrl");
+ apc->mmr_mem = devm_ioremap_resource(dev, res);
+ if (IS_ERR(apc->mmr_mem))
+ return PTR_ERR(apc->mmr_mem);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "ar2315-pci-ext");
+ if (!res)
+ return -EINVAL;
+
+ apc->mem_res.name = "AR2315 PCI mem space";
+ apc->mem_res.parent = res;
+ apc->mem_res.start = res->start;
+ apc->mem_res.end = res->end;
+ apc->mem_res.flags = IORESOURCE_MEM;
+
+ /* Remap PCI config space */
+ apc->cfg_mem = devm_ioremap_nocache(dev, res->start,
+ AR2315_PCI_CFG_SIZE);
+ if (!apc->cfg_mem) {
+ dev_err(dev, "failed to remap PCI config space\n");
+ return -ENOMEM;
+ }
+
+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+ ar2315_pci_reg_mask(apc, AR2315_PCI_MISC_CONFIG,
+ AR2315_PCIMISC_RST_MODE,
+ AR2315_PCIRST_LOW);
+ msleep(100);
+
+ /* Bring the PCI out of reset */
+ ar2315_pci_reg_mask(apc, AR2315_PCI_MISC_CONFIG,
+ AR2315_PCIMISC_RST_MODE,
+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
+
+ ar2315_pci_reg_write(apc, AR2315_PCI_UNCACHE_CFG,
+ 0x1E | /* 1GB uncached */
+ (1 << 5) | /* Enable uncached */
+ (0x2 << 30) /* Base: 0x80000000 */);
+ ar2315_pci_reg_read(apc, AR2315_PCI_UNCACHE_CFG);
+
+ msleep(500);
+
+ err = ar2315_pci_host_setup(apc);
+ if (err)
+ return err;
+
+ apc->domain = irq_domain_add_linear(NULL, AR2315_PCI_IRQ_COUNT,
+ &ar2315_pci_irq_domain_ops, apc);
+ if (!apc->domain) {
+ dev_err(dev, "failed to add IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ ar2315_pci_irq_init(apc);
+
+ /* PCI controller does not support I/O ports */
+ apc->io_res.name = "AR2315 IO space";
+ apc->io_res.start = 0;
+ apc->io_res.end = 0;
+ apc->io_res.flags = IORESOURCE_IO,
+
+ apc->pci_ctrl.pci_ops = &ar2315_pci_ops;
+ apc->pci_ctrl.mem_resource = &apc->mem_res,
+ apc->pci_ctrl.io_resource = &apc->io_res,
+
+ register_pci_controller(&apc->pci_ctrl);
+
+ dev_info(dev, "register PCI controller\n");
+
+ return 0;
+}
+
+static struct platform_driver ar2315_pci_driver = {
+ .probe = ar2315_pci_probe,
+ .driver = {
+ .name = "ar2315-pci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ar2315_pci_init(void)
+{
+ return platform_driver_register(&ar2315_pci_driver);
+}
+arch_initcall(ar2315_pci_init);
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct ar2315_pci_ctrl *apc = ar2315_pci_bus_to_apc(dev->bus);
+
+ return slot ? 0 : apc->irq_ext;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index d471a26dd5f8..2b534aea20e4 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -50,7 +50,6 @@
struct ar71xx_pci_controller {
void __iomem *cfg_base;
- spinlock_t lock;
int irq;
int irq_base;
struct pci_controller pci_ctrl;
@@ -182,7 +181,6 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
{
struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
void __iomem *base = apc->cfg_base;
- unsigned long flags;
u32 data;
int err;
int ret;
@@ -190,8 +188,6 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
ret = PCIBIOS_SUCCESSFUL;
data = ~0;
- spin_lock_irqsave(&apc->lock, flags);
-
err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
AR71XX_PCI_CFG_CMD_READ);
if (err)
@@ -199,8 +195,6 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
else
data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
- spin_unlock_irqrestore(&apc->lock, flags);
-
*value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
return ret;
@@ -211,15 +205,12 @@ static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
{
struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
void __iomem *base = apc->cfg_base;
- unsigned long flags;
int err;
int ret;
value = value << (8 * (where & 3));
ret = PCIBIOS_SUCCESSFUL;
- spin_lock_irqsave(&apc->lock, flags);
-
err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
AR71XX_PCI_CFG_CMD_WRITE);
if (err)
@@ -227,8 +218,6 @@ static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
else
__raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
- spin_unlock_irqrestore(&apc->lock, flags);
-
return ret;
}
@@ -360,8 +349,6 @@ static int ar71xx_pci_probe(struct platform_device *pdev)
if (!apc)
return -ENOMEM;
- spin_lock_init(&apc->lock);
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
apc->cfg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(apc->cfg_base))
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 785b2659b519..b7a6fcbb8852 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -9,7 +9,6 @@
* by the Free Software Foundation.
*/
-#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/module.h>
@@ -48,8 +47,6 @@ struct ar724x_pci_controller {
bool bar0_is_cached;
u32 bar0_value;
- spinlock_t lock;
-
struct pci_controller pci_controller;
struct resource io_res;
struct resource mem_res;
@@ -75,7 +72,6 @@ pci_bus_to_ar724x_controller(struct pci_bus *bus)
static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
int where, int size, u32 value)
{
- unsigned long flags;
void __iomem *base;
u32 data;
int s;
@@ -86,8 +82,6 @@ static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
return PCIBIOS_DEVICE_NOT_FOUND;
base = apc->crp_base;
-
- spin_lock_irqsave(&apc->lock, flags);
data = __raw_readl(base + (where & ~3));
switch (size) {
@@ -105,14 +99,12 @@ static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
data = value;
break;
default:
- spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
__raw_writel(data, base + (where & ~3));
/* flush write */
__raw_readl(base + (where & ~3));
- spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
@@ -121,7 +113,6 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
struct ar724x_pci_controller *apc;
- unsigned long flags;
void __iomem *base;
u32 data;
@@ -133,8 +124,6 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
return PCIBIOS_DEVICE_NOT_FOUND;
base = apc->devcfg_base;
-
- spin_lock_irqsave(&apc->lock, flags);
data = __raw_readl(base + (where & ~3));
switch (size) {
@@ -153,13 +142,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
case 4:
break;
default:
- spin_unlock_irqrestore(&apc->lock, flags);
-
return PCIBIOS_BAD_REGISTER_NUMBER;
}
- spin_unlock_irqrestore(&apc->lock, flags);
-
if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
apc->bar0_is_cached) {
/* use the cached value */
@@ -175,7 +160,6 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t value)
{
struct ar724x_pci_controller *apc;
- unsigned long flags;
void __iomem *base;
u32 data;
int s;
@@ -209,8 +193,6 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
}
base = apc->devcfg_base;
-
- spin_lock_irqsave(&apc->lock, flags);
data = __raw_readl(base + (where & ~3));
switch (size) {
@@ -228,15 +210,12 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
data = value;
break;
default:
- spin_unlock_irqrestore(&apc->lock, flags);
-
return PCIBIOS_BAD_REGISTER_NUMBER;
}
__raw_writel(data, base + (where & ~3));
/* flush write */
__raw_readl(base + (where & ~3));
- spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
@@ -380,8 +359,6 @@ static int ar724x_pci_probe(struct platform_device *pdev)
if (apc->irq < 0)
return -EINVAL;
- spin_lock_init(&apc->lock);
-
res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
if (!res)
return -EINVAL;
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
new file mode 100644
index 000000000000..a4574947e698
--- /dev/null
+++ b/arch/mips/pci/pci-rt2880.c
@@ -0,0 +1,285 @@
+/*
+ * Ralink RT288x SoC PCI register definitions
+ *
+ * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+
+#include <asm/mach-ralink/rt288x.h>
+
+#define RT2880_PCI_BASE 0x00440000
+#define RT288X_CPU_IRQ_PCI 4
+
+#define RT2880_PCI_MEM_BASE 0x20000000
+#define RT2880_PCI_MEM_SIZE 0x10000000
+#define RT2880_PCI_IO_BASE 0x00460000
+#define RT2880_PCI_IO_SIZE 0x00010000
+
+#define RT2880_PCI_REG_PCICFG_ADDR 0x00
+#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
+#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
+#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
+#define RT2880_PCI_REG_CONFIG_ADDR 0x20
+#define RT2880_PCI_REG_CONFIG_DATA 0x24
+#define RT2880_PCI_REG_MEMBASE 0x28
+#define RT2880_PCI_REG_IOBASE 0x2c
+#define RT2880_PCI_REG_ID 0x30
+#define RT2880_PCI_REG_CLASS 0x34
+#define RT2880_PCI_REG_SUBID 0x38
+#define RT2880_PCI_REG_ARBCTL 0x80
+
+static void __iomem *rt2880_pci_base;
+static DEFINE_SPINLOCK(rt2880_pci_lock);
+
+static u32 rt2880_pci_reg_read(u32 reg)
+{
+ return readl(rt2880_pci_base + reg);
+}
+
+static void rt2880_pci_reg_write(u32 val, u32 reg)
+{
+ writel(val, rt2880_pci_base + reg);
+}
+
+static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+ unsigned int func, unsigned int where)
+{
+ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+ 0x80000000);
+}
+
+static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt2880_pci_ops = {
+ .read = rt2880_pci_config_read,
+ .write = rt2880_pci_config_write,
+};
+
+static struct resource rt2880_pci_mem_resource = {
+ .name = "PCI MEM space",
+ .start = RT2880_PCI_MEM_BASE,
+ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource rt2880_pci_io_resource = {
+ .name = "PCI IO space",
+ .start = RT2880_PCI_IO_BASE,
+ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct pci_controller rt2880_pci_controller = {
+ .pci_ops = &rt2880_pci_ops,
+ .mem_resource = &rt2880_pci_mem_resource,
+ .io_resource = &rt2880_pci_io_resource,
+};
+
+static inline u32 rt2880_pci_read_u32(unsigned long reg)
+{
+ unsigned long flags;
+ u32 address;
+ u32 ret;
+
+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ return ret;
+}
+
+static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+
+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u16 cmd;
+ int irq = -1;
+
+ if (dev->bus->number != 0)
+ return irq;
+
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0x00:
+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
+ break;
+ case 0x11:
+ irq = RT288X_CPU_IRQ_PCI;
+ break;
+ default:
+ pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",
+ __FILE__, __func__, __LINE__);
+ BUG();
+ break;
+ }
+
+ pci_write_config_byte((struct pci_dev *) dev,
+ PCI_CACHE_LINE_SIZE, 0x14);
+ pci_write_config_byte((struct pci_dev *) dev, PCI_LATENCY_TIMER, 0xFF);
+ pci_read_config_word((struct pci_dev *) dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
+ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
+ pci_write_config_word((struct pci_dev *) dev, PCI_COMMAND, cmd);
+ pci_write_config_byte((struct pci_dev *) dev, PCI_INTERRUPT_LINE,
+ dev->irq);
+ return irq;
+}
+
+static int rt288x_pci_probe(struct platform_device *pdev)
+{
+ void __iomem *io_map_base;
+ int i;
+
+ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
+
+ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
+ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
+ set_io_port_base((unsigned long) io_map_base);
+
+ ioport_resource.start = RT2880_PCI_IO_BASE;
+ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
+
+ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
+ for (i = 0; i < 0xfffff; i++)
+ ;
+
+ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
+ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
+ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
+ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
+ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
+ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
+ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
+ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
+ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
+
+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
+
+ register_pci_controller(&rt2880_pci_controller);
+ return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id rt288x_pci_match[] = {
+ { .compatible = "ralink,rt288x-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt288x_pci_match);
+
+static struct platform_driver rt288x_pci_driver = {
+ .probe = rt288x_pci_probe,
+ .driver = {
+ .name = "rt288x-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = rt288x_pci_match,
+ },
+};
+
+int __init pcibios_init(void)
+{
+ int ret = platform_driver_register(&rt288x_pci_driver);
+
+ if (ret)
+ pr_info("rt288x-pci: Error registering platform driver!");
+
+ return ret;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 72919aeef42b..0bcc0b1cfddc 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -61,7 +61,6 @@
struct rt3883_pci_controller {
void __iomem *base;
- spinlock_t lock;
struct device_node *intc_of_node;
struct irq_domain *irq_domain;
@@ -111,10 +110,8 @@ static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
- spin_lock_irqsave(&rpc->lock, flags);
rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
- spin_unlock_irqrestore(&rpc->lock, flags);
return ret;
}
@@ -128,10 +125,8 @@ static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
- spin_lock_irqsave(&rpc->lock, flags);
rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
- spin_unlock_irqrestore(&rpc->lock, flags);
}
static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -252,10 +247,8 @@ static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where);
- spin_lock_irqsave(&rpc->lock, flags);
rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
- spin_unlock_irqrestore(&rpc->lock, flags);
switch (size) {
case 1:
@@ -288,7 +281,6 @@ static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where);
- spin_lock_irqsave(&rpc->lock, flags);
rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
@@ -307,7 +299,6 @@ static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
}
rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
- spin_unlock_irqrestore(&rpc->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
index c10fbf2a19dc..cd8ed09c4f53 100644
--- a/arch/mips/pci/pci-tx4939.c
+++ b/arch/mips/pci/pci-tx4939.c
@@ -103,5 +103,5 @@ void __init tx4939_setup_pcierr_irq(void)
tx4927_pcierr_interrupt,
0, "PCI error",
(void *)TX4939_PCIC_REG))
- pr_warning("Failed to request irq for PCIERR\n");
+ pr_warn("Failed to request irq for PCIERR\n");
}
diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c
index 1c9897531660..ef620a4c82a5 100644
--- a/arch/mips/pmcs-msp71xx/msp_prom.c
+++ b/arch/mips/pmcs-msp71xx/msp_prom.c
@@ -295,7 +295,7 @@ char *prom_getenv(char *env_name)
while (*var) {
if (strncmp(env_name, *var, i) == 0) {
- return (*var + strlen(env_name) + 1);
+ return *var + strlen(env_name) + 1;
}
var++;
}
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 77e8a9620e18..b1c52ca580f9 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -16,6 +16,7 @@ choice
config SOC_RT288X
bool "RT288x"
select MIPS_L1_CACHE_SHIFT_4
+ select HW_HAS_PCI
config SOC_RT305X
bool "RT305x"
@@ -26,7 +27,7 @@ choice
select HW_HAS_PCI
config SOC_MT7620
- bool "MT7620"
+ bool "MT7620/8"
endchoice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 2c09c8aa0ae2..a6c9d0061326 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -10,9 +10,13 @@ obj-y := prom.o of.o reset.o clk.o irq.o timer.o
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
new file mode 100644
index 000000000000..5403468394fb
--- /dev/null
+++ b/arch/mips/ralink/bootrom.c
@@ -0,0 +1,48 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define BOOTROM_OFFSET 0x10118000
+#define BOOTROM_SIZE 0x8000
+
+static void __iomem *membase = (void __iomem *) KSEG1ADDR(BOOTROM_OFFSET);
+
+static int bootrom_show(struct seq_file *s, void *unused)
+{
+ seq_write(s, membase, BOOTROM_SIZE);
+
+ return 0;
+}
+
+static int bootrom_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, bootrom_show, NULL);
+}
+
+static const struct file_operations bootrom_file_ops = {
+ .open = bootrom_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int bootrom_setup(void)
+{
+ if (!debugfs_create_file("bootrom", 0444,
+ NULL, NULL, &bootrom_file_ops)) {
+ pr_err("Failed to create bootrom debugfs file\n");
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+postcore_initcall(bootrom_setup);
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index 5d0983d47161..feb5a9bf98b4 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_get_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -1;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
void __init plat_time_init(void)
{
struct clk *clk;
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index 42dfd6100a2d..8e7d8e618fb9 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -11,25 +11,6 @@
#define RAMIPS_SYS_TYPE_LEN 32
-struct ralink_pinmux_grp {
- const char *name;
- u32 mask;
- int gpio_first;
- int gpio_last;
-};
-
-struct ralink_pinmux {
- struct ralink_pinmux_grp *mode;
- struct ralink_pinmux_grp *uart;
- int uart_shift;
- u32 uart_mask;
- void (*wdt_reset)(void);
- struct ralink_pinmux_grp *pci;
- int pci_shift;
- u32 pci_mask;
-};
-extern struct ralink_pinmux rt_gpio_pinmux;
-
struct ralink_soc_info {
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
unsigned char *compatible;
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index b46d0419d09b..255d695ec8c6 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -12,21 +12,24 @@
#include <asm/addrspace.h>
#ifdef CONFIG_SOC_RT288X
-#define EARLY_UART_BASE 0x300c00
+#define EARLY_UART_BASE 0x300c00
+#define CHIPID_BASE 0x300004
+#elif defined(CONFIG_SOC_MT7621)
+#define EARLY_UART_BASE 0x1E000c00
+#define CHIPID_BASE 0x1E000004
#else
-#define EARLY_UART_BASE 0x10000c00
+#define EARLY_UART_BASE 0x10000c00
+#define CHIPID_BASE 0x10000004
#endif
-#define UART_REG_RX 0x00
-#define UART_REG_TX 0x04
-#define UART_REG_IER 0x08
-#define UART_REG_IIR 0x0c
-#define UART_REG_FCR 0x10
-#define UART_REG_LCR 0x14
-#define UART_REG_MCR 0x18
-#define UART_REG_LSR 0x1c
+#define MT7628_CHIP_NAME1 0x20203832
+
+#define UART_REG_TX 0x04
+#define UART_REG_LSR 0x14
+#define UART_REG_LSR_RT2880 0x1c
static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
+static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
static inline void uart_w32(u32 val, unsigned reg)
{
@@ -38,11 +41,23 @@ static inline u32 uart_r32(unsigned reg)
return __raw_readl(uart_membase + reg);
}
+static inline int soc_is_mt7628(void)
+{
+ return IS_ENABLED(CONFIG_SOC_MT7620) &&
+ (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
+}
+
void prom_putchar(unsigned char ch)
{
- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
- ;
- uart_w32(ch, UART_REG_TX);
- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
- ;
+ if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
+ uart_w32(ch, UART_TX);
+ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+ ;
+ } else {
+ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
+ ;
+ uart_w32(ch, UART_REG_TX);
+ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
+ ;
+ }
}
diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
new file mode 100644
index 000000000000..e20b02e3ae28
--- /dev/null
+++ b/arch/mips/ralink/ill_acc.c
@@ -0,0 +1,87 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define REG_ILL_ACC_ADDR 0x10
+#define REG_ILL_ACC_TYPE 0x14
+
+#define ILL_INT_STATUS BIT(31)
+#define ILL_ACC_WRITE BIT(30)
+#define ILL_ACC_LEN_M 0xff
+#define ILL_ACC_OFF_M 0xf
+#define ILL_ACC_OFF_S 16
+#define ILL_ACC_ID_M 0x7
+#define ILL_ACC_ID_S 8
+
+#define DRV_NAME "ill_acc"
+
+static const char * const ill_acc_ids[] = {
+ "cpu", "dma", "ppe", "pdma rx", "pdma tx", "pci/e", "wmac", "usb",
+};
+
+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
+{
+ struct device *dev = (struct device *) _priv;
+ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
+ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
+
+ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
+ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
+ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
+ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
+ type & ILL_ACC_LEN_M);
+
+ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+
+ return IRQ_HANDLED;
+}
+
+static int __init ill_acc_of_setup(void)
+{
+ struct platform_device *pdev;
+ struct device_node *np;
+ int irq;
+
+ /* somehow this driver breaks on RT5350 */
+ if (of_machine_is_compatible("ralink,rt5350-soc"))
+ return -EINVAL;
+
+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
+ if (!np)
+ return -EINVAL;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_err("%s: failed to lookup pdev\n", np->name);
+ return -EINVAL;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ return -EINVAL;
+ }
+
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
+
+ dev_info(&pdev->dev, "irq registered\n");
+
+ return 0;
+}
+
+arch_initcall(ill_acc_of_setup);
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 781b3d14a489..7cf91b92e9d1 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -20,14 +20,6 @@
#include "common.h"
-/* INTC register offsets */
-#define INTC_REG_STATUS0 0x00
-#define INTC_REG_STATUS1 0x04
-#define INTC_REG_TYPE 0x20
-#define INTC_REG_RAW_STATUS 0x30
-#define INTC_REG_ENABLE 0x34
-#define INTC_REG_DISABLE 0x38
-
#define INTC_INT_GLOBAL BIT(31)
#define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2)
@@ -44,16 +36,36 @@
#define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9)
+enum rt_intc_regs_enum {
+ INTC_REG_STATUS0 = 0,
+ INTC_REG_STATUS1,
+ INTC_REG_TYPE,
+ INTC_REG_RAW_STATUS,
+ INTC_REG_ENABLE,
+ INTC_REG_DISABLE,
+};
+
+static u32 rt_intc_regs[] = {
+ [INTC_REG_STATUS0] = 0x00,
+ [INTC_REG_STATUS1] = 0x04,
+ [INTC_REG_TYPE] = 0x20,
+ [INTC_REG_RAW_STATUS] = 0x30,
+ [INTC_REG_ENABLE] = 0x34,
+ [INTC_REG_DISABLE] = 0x38,
+};
+
static void __iomem *rt_intc_membase;
+static int rt_perfcount_irq;
+
static inline void rt_intc_w32(u32 val, unsigned reg)
{
- __raw_writel(val, rt_intc_membase + reg);
+ __raw_writel(val, rt_intc_membase + rt_intc_regs[reg]);
}
static inline u32 rt_intc_r32(unsigned reg)
{
- return __raw_readl(rt_intc_membase + reg);
+ return __raw_readl(rt_intc_membase + rt_intc_regs[reg]);
}
static void ralink_intc_irq_unmask(struct irq_data *d)
@@ -73,6 +85,11 @@ static struct irq_chip ralink_intc_irq_chip = {
.irq_mask_ack = ralink_intc_irq_mask,
};
+int get_c0_perfcount_int(void)
+{
+ return rt_perfcount_irq;
+}
+
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
@@ -134,6 +151,10 @@ static int __init intc_of_init(struct device_node *node,
struct irq_domain *domain;
int irq;
+ if (!of_property_read_u32_array(node, "ralink,intc-registers",
+ rt_intc_regs, 6))
+ pr_info("intc: using register map from devicetree\n");
+
irq = irq_of_parse_and_map(node, 0);
if (!irq)
panic("Failed to get INTC IRQ");
@@ -167,13 +188,13 @@ static int __init intc_of_init(struct device_node *node,
irq_set_handler_data(irq, domain);
/* tell the kernel which irq is used for performance monitoring */
- cp0_perfcount_irq = irq_create_mapping(domain, 9);
+ rt_perfcount_irq = irq_create_mapping(domain, 9);
return 0;
}
static struct of_device_id __initdata of_irq_ids[] = {
- { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
{},
};
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index a3ad56c2372d..2ea5ff6dc22e 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -17,124 +17,214 @@
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
+#include <asm/mach-ralink/pinmux.h>
#include "common.h"
+/* analog */
+#define PMU0_CFG 0x88
+#define PMU_SW_SET BIT(28)
+#define A_DCDC_EN BIT(24)
+#define A_SSC_PERI BIT(19)
+#define A_SSC_GEN BIT(18)
+#define A_SSC_M 0x3
+#define A_SSC_S 16
+#define A_DLY_M 0x7
+#define A_DLY_S 8
+#define A_VTUNE_M 0xff
+
+/* digital */
+#define PMU1_CFG 0x8C
+#define DIG_SW_SEL BIT(25)
+
+/* is this a MT7620 or a MT7628 */
+enum mt762x_soc_type mt762x_soc;
+
/* does the board have sdram or ddram */
static int dram_type;
-static struct ralink_pinmux_grp mode_mux[] = {
- {
- .name = "i2c",
- .mask = MT7620_GPIO_MODE_I2C,
- .gpio_first = 1,
- .gpio_last = 2,
- }, {
- .name = "spi",
- .mask = MT7620_GPIO_MODE_SPI,
- .gpio_first = 3,
- .gpio_last = 6,
- }, {
- .name = "uartlite",
- .mask = MT7620_GPIO_MODE_UART1,
- .gpio_first = 15,
- .gpio_last = 16,
- }, {
- .name = "wdt",
- .mask = MT7620_GPIO_MODE_WDT,
- .gpio_first = 17,
- .gpio_last = 17,
- }, {
- .name = "mdio",
- .mask = MT7620_GPIO_MODE_MDIO,
- .gpio_first = 22,
- .gpio_last = 23,
- }, {
- .name = "rgmii1",
- .mask = MT7620_GPIO_MODE_RGMII1,
- .gpio_first = 24,
- .gpio_last = 35,
- }, {
- .name = "spi refclk",
- .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
- .gpio_first = 37,
- .gpio_last = 39,
- }, {
- .name = "jtag",
- .mask = MT7620_GPIO_MODE_JTAG,
- .gpio_first = 40,
- .gpio_last = 44,
- }, {
- /* shared lines with jtag */
- .name = "ephy",
- .mask = MT7620_GPIO_MODE_EPHY,
- .gpio_first = 40,
- .gpio_last = 44,
- }, {
- .name = "nand",
- .mask = MT7620_GPIO_MODE_JTAG,
- .gpio_first = 45,
- .gpio_last = 59,
- }, {
- .name = "rgmii2",
- .mask = MT7620_GPIO_MODE_RGMII2,
- .gpio_first = 60,
- .gpio_last = 71,
- }, {
- .name = "wled",
- .mask = MT7620_GPIO_MODE_WLED,
- .gpio_first = 72,
- .gpio_last = 72,
- }, {0}
+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
+static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
+static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
+static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
+static struct rt2880_pmx_func uartf_grp[] = {
+ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
+ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
+ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
+ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
+ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
+ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
+ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
+};
+static struct rt2880_pmx_func wdt_grp[] = {
+ FUNC("wdt rst", 0, 17, 1),
+ FUNC("wdt refclk", 0, 17, 1),
+ };
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
+ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
+};
+static struct rt2880_pmx_func nd_sd_grp[] = {
+ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
+ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+};
+
+static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
+ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
+ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
+ MT7620_GPIO_MODE_UART0_SHIFT),
+ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
+ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
+ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
+ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
+ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
+ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
+ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
+ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
+ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
+ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
+ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
+ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
+ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
+ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
+ { 0 }
+};
+
+static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+ FUNC("sdcx", 3, 19, 1),
+ FUNC("utif", 2, 19, 1),
+ FUNC("gpio", 1, 19, 1),
+ FUNC("pwm", 0, 19, 1),
+};
+
+static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
+ FUNC("sdcx", 3, 18, 1),
+ FUNC("utif", 2, 18, 1),
+ FUNC("gpio", 1, 18, 1),
+ FUNC("pwm", 0, 18, 1),
+};
+
+static struct rt2880_pmx_func uart2_grp_mt7628[] = {
+ FUNC("sdcx", 3, 20, 2),
+ FUNC("pwm", 2, 20, 2),
+ FUNC("gpio", 1, 20, 2),
+ FUNC("uart", 0, 20, 2),
+};
+
+static struct rt2880_pmx_func uart1_grp_mt7628[] = {
+ FUNC("sdcx", 3, 45, 2),
+ FUNC("pwm", 2, 45, 2),
+ FUNC("gpio", 1, 45, 2),
+ FUNC("uart", 0, 45, 2),
+};
+
+static struct rt2880_pmx_func i2c_grp_mt7628[] = {
+ FUNC("-", 3, 4, 2),
+ FUNC("debug", 2, 4, 2),
+ FUNC("gpio", 1, 4, 2),
+ FUNC("i2c", 0, 4, 2),
+};
+
+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
+
+static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
+ FUNC("jtag", 3, 22, 8),
+ FUNC("utif", 2, 22, 8),
+ FUNC("gpio", 1, 22, 8),
+ FUNC("sdcx", 0, 22, 8),
+};
+
+static struct rt2880_pmx_func uart0_grp_mt7628[] = {
+ FUNC("-", 3, 12, 2),
+ FUNC("-", 2, 12, 2),
+ FUNC("gpio", 1, 12, 2),
+ FUNC("uart", 0, 12, 2),
+};
+
+static struct rt2880_pmx_func i2s_grp_mt7628[] = {
+ FUNC("antenna", 3, 0, 4),
+ FUNC("pcm", 2, 0, 4),
+ FUNC("gpio", 1, 0, 4),
+ FUNC("i2s", 0, 0, 4),
+};
+
+static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
+ FUNC("-", 3, 6, 1),
+ FUNC("refclk", 2, 6, 1),
+ FUNC("gpio", 1, 6, 1),
+ FUNC("spi", 0, 6, 1),
+};
+
+static struct rt2880_pmx_func spis_grp_mt7628[] = {
+ FUNC("pwm", 3, 14, 4),
+ FUNC("util", 2, 14, 4),
+ FUNC("gpio", 1, 14, 4),
+ FUNC("spis", 0, 14, 4),
};
-static struct ralink_pinmux_grp uart_mux[] = {
- {
- .name = "uartf",
- .mask = MT7620_GPIO_MODE_UARTF,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "pcm uartf",
- .mask = MT7620_GPIO_MODE_PCM_UARTF,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "pcm i2s",
- .mask = MT7620_GPIO_MODE_PCM_I2S,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "i2s uartf",
- .mask = MT7620_GPIO_MODE_I2S_UARTF,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "pcm gpio",
- .mask = MT7620_GPIO_MODE_PCM_GPIO,
- .gpio_first = 11,
- .gpio_last = 14,
- }, {
- .name = "gpio uartf",
- .mask = MT7620_GPIO_MODE_GPIO_UARTF,
- .gpio_first = 7,
- .gpio_last = 10,
- }, {
- .name = "gpio i2s",
- .mask = MT7620_GPIO_MODE_GPIO_I2S,
- .gpio_first = 7,
- .gpio_last = 10,
- }, {
- .name = "gpio",
- .mask = MT7620_GPIO_MODE_GPIO,
- }, {0}
+static struct rt2880_pmx_func gpio_grp_mt7628[] = {
+ FUNC("pcie", 3, 11, 1),
+ FUNC("refclk", 2, 11, 1),
+ FUNC("gpio", 1, 11, 1),
+ FUNC("gpio", 0, 11, 1),
};
-struct ralink_pinmux rt_gpio_pinmux = {
- .mode = mode_mux,
- .uart = uart_mux,
- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
+#define MT7628_GPIO_MODE_MASK 0x3
+
+#define MT7628_GPIO_MODE_PWM1 30
+#define MT7628_GPIO_MODE_PWM0 28
+#define MT7628_GPIO_MODE_UART2 26
+#define MT7628_GPIO_MODE_UART1 24
+#define MT7628_GPIO_MODE_I2C 20
+#define MT7628_GPIO_MODE_REFCLK 18
+#define MT7628_GPIO_MODE_PERST 16
+#define MT7628_GPIO_MODE_WDT 14
+#define MT7628_GPIO_MODE_SPI 12
+#define MT7628_GPIO_MODE_SDMODE 10
+#define MT7628_GPIO_MODE_UART0 8
+#define MT7628_GPIO_MODE_I2S 6
+#define MT7628_GPIO_MODE_CS1 4
+#define MT7628_GPIO_MODE_SPIS 2
+#define MT7628_GPIO_MODE_GPIO 0
+
+static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
+ GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_PWM1),
+ GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_PWM0),
+ GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_UART2),
+ GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_UART1),
+ GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_I2C),
+ GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
+ GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
+ GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
+ GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_SDMODE),
+ GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_UART0),
+ GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_I2S),
+ GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_CS1),
+ GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_SPIS),
+ GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_GPIO),
+ { 0 }
};
static __init u32
@@ -287,29 +377,42 @@ void __init ralink_clk_init(void)
xtal_rate = mt7620_get_xtal_rate();
- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
-
- cpu_rate = mt7620_get_cpu_rate(pll_rate);
- dram_rate = mt7620_get_dram_rate(pll_rate);
- sys_rate = mt7620_get_sys_rate(cpu_rate);
- periph_rate = mt7620_get_periph_rate(xtal_rate);
-
#define RFMT(label) label ":%lu.%03luMHz "
#define RINT(x) ((x) / 1000000)
#define RFRAC(x) (((x) / 1000) % 1000)
- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
- RINT(xtal_rate), RFRAC(xtal_rate),
- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
- RINT(pll_rate), RFRAC(pll_rate));
+ if (mt762x_soc == MT762X_SOC_MT7628AN) {
+ if (xtal_rate == MHZ(40))
+ cpu_rate = MHZ(580);
+ else
+ cpu_rate = MHZ(575);
+ dram_rate = sys_rate = cpu_rate / 3;
+ periph_rate = MHZ(40);
+
+ ralink_clk_add("10000d00.uartlite", periph_rate);
+ ralink_clk_add("10000e00.uartlite", periph_rate);
+ } else {
+ cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+ pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+ cpu_rate = mt7620_get_cpu_rate(pll_rate);
+ dram_rate = mt7620_get_dram_rate(pll_rate);
+ sys_rate = mt7620_get_sys_rate(cpu_rate);
+ periph_rate = mt7620_get_periph_rate(xtal_rate);
+
+ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+ RINT(xtal_rate), RFRAC(xtal_rate),
+ RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+ RINT(pll_rate), RFRAC(pll_rate));
+
+ ralink_clk_add("10000500.uart", periph_rate);
+ }
pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
RINT(cpu_rate), RFRAC(cpu_rate),
RINT(dram_rate), RFRAC(dram_rate),
RINT(sys_rate), RFRAC(sys_rate),
RINT(periph_rate), RFRAC(periph_rate));
-
#undef RFRAC
#undef RINT
#undef RFMT
@@ -317,9 +420,9 @@ void __init ralink_clk_init(void)
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000100.timer", periph_rate);
ralink_clk_add("10000120.watchdog", periph_rate);
- ralink_clk_add("10000500.uart", periph_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
+ ralink_clk_add("10180000.wmac", xtal_rate);
}
void __init ralink_of_remap(void)
@@ -331,6 +434,52 @@ void __init ralink_of_remap(void)
panic("Failed to remap core resources");
}
+static __init void
+mt7620_dram_init(struct ralink_soc_info *soc_info)
+{
+ switch (dram_type) {
+ case SYSCFG0_DRAM_TYPE_SDRAM:
+ pr_info("Board has SDRAM\n");
+ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+ break;
+
+ case SYSCFG0_DRAM_TYPE_DDR1:
+ pr_info("Board has DDR1\n");
+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+ break;
+
+ case SYSCFG0_DRAM_TYPE_DDR2:
+ pr_info("Board has DDR2\n");
+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+ break;
+ default:
+ BUG();
+ }
+}
+
+static __init void
+mt7628_dram_init(struct ralink_soc_info *soc_info)
+{
+ switch (dram_type) {
+ case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
+ pr_info("Board has DDR1\n");
+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+ break;
+
+ case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
+ pr_info("Board has DDR2\n");
+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+ break;
+ default:
+ BUG();
+ }
+}
+
void prom_soc_init(struct ralink_soc_info *soc_info)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
@@ -339,22 +488,36 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
u32 n1;
u32 rev;
u32 cfg0;
+ u32 pmu0;
+ u32 pmu1;
+ u32 bga;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-
- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
- name = "MT7620A";
- soc_info->compatible = "ralink,mt7620a-soc";
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+
+ if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
+ if (bga) {
+ mt762x_soc = MT762X_SOC_MT7620A;
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+ mt762x_soc = MT762X_SOC_MT7620N;
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+#ifdef CONFIG_PCI
+ panic("mt7620n is only supported for non pci kernels");
+#endif
+ }
+ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
+ mt762x_soc = MT762X_SOC_MT7628AN;
+ name = "MT7628AN";
+ soc_info->compatible = "ralink,mt7628an-soc";
} else {
- panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
}
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u",
name,
@@ -364,26 +527,22 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
- switch (dram_type) {
- case SYSCFG0_DRAM_TYPE_SDRAM:
- pr_info("Board has SDRAM\n");
- soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
- soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
- break;
-
- case SYSCFG0_DRAM_TYPE_DDR1:
- pr_info("Board has DDR1\n");
- soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
- soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
- break;
-
- case SYSCFG0_DRAM_TYPE_DDR2:
- pr_info("Board has DDR2\n");
- soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
- soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
- break;
- default:
- BUG();
- }
soc_info->mem_base = MT7620_DRAM_BASE;
+ if (mt762x_soc == MT762X_SOC_MT7628AN)
+ mt7628_dram_init(soc_info);
+ else
+ mt7620_dram_init(soc_info);
+
+ pmu0 = __raw_readl(sysc + PMU0_CFG);
+ pmu1 = __raw_readl(sysc + PMU1_CFG);
+
+ pr_info("Analog PMU set to %s control\n",
+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+ if (mt762x_soc == MT762X_SOC_MT7628AN)
+ rt2880_pinmux_data = mt7628an_pinmux_data;
+ else
+ rt2880_pinmux_data = mt7620a_pinmux_data;
}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 7c4598cb6de8..0d30dcd63246 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -53,6 +53,17 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
+static int memory_dtb;
+
+static int __init early_init_dt_find_memory(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ if (depth == 1 && !strcmp(uname, "memory@0"))
+ memory_dtb = 1;
+
+ return 0;
+}
+
void __init plat_mem_setup(void)
{
set_io_port_base(KSEG1);
@@ -63,7 +74,12 @@ void __init plat_mem_setup(void)
*/
__dt_setup_arch(__dtb_start);
- if (soc_info.mem_size)
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+ else if (soc_info.mem_size)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
BOOT_MEM_RAM);
else
@@ -74,19 +90,9 @@ void __init plat_mem_setup(void)
static int __init plat_of_setup(void)
{
- static struct of_device_id of_ids[3];
- int len = sizeof(of_ids[0].compatible);
-
- if (!of_have_populated_dt())
- panic("device tree not present");
-
- strlcpy(of_ids[0].compatible, soc_info.compatible, len);
- strlcpy(of_ids[1].compatible, "palmbus", len);
-
- if (of_platform_populate(NULL, of_ids, NULL, NULL))
- panic("failed to populate DT");
+ __dt_register_buses(soc_info.compatible, "palmbus");
- /* make sure ithat the reset controller is setup early */
+ /* make sure that the reset controller is setup early */
ralink_rst_init();
return 0;
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 9c64f029d047..09419f67da39 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -18,6 +18,7 @@
#include "common.h"
struct ralink_soc_info soc_info;
+struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
const char *get_system_type(void)
{
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index f87de1ab2198..738cec865f41 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -17,46 +17,27 @@
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/pinmux.h>
#include "common.h"
-static struct ralink_pinmux_grp mode_mux[] = {
- {
- .name = "i2c",
- .mask = RT2880_GPIO_MODE_I2C,
- .gpio_first = 1,
- .gpio_last = 2,
- }, {
- .name = "spi",
- .mask = RT2880_GPIO_MODE_SPI,
- .gpio_first = 3,
- .gpio_last = 6,
- }, {
- .name = "uartlite",
- .mask = RT2880_GPIO_MODE_UART0,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "jtag",
- .mask = RT2880_GPIO_MODE_JTAG,
- .gpio_first = 17,
- .gpio_last = 21,
- }, {
- .name = "mdio",
- .mask = RT2880_GPIO_MODE_MDIO,
- .gpio_first = 22,
- .gpio_last = 23,
- }, {
- .name = "sdram",
- .mask = RT2880_GPIO_MODE_SDRAM,
- .gpio_first = 24,
- .gpio_last = 39,
- }, {
- .name = "pci",
- .mask = RT2880_GPIO_MODE_PCI,
- .gpio_first = 40,
- .gpio_last = 71,
- }, {0}
+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
+
+static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
+ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
+ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
+ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
+ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
+ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
+ { 0 }
};
static void rt288x_wdt_reset(void)
@@ -69,14 +50,9 @@ static void rt288x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_CLKCFG);
}
-struct ralink_pinmux rt_gpio_pinmux = {
- .mode = mode_mux,
- .wdt_reset = rt288x_wdt_reset,
-};
-
void __init ralink_clk_init(void)
{
- unsigned long cpu_rate;
+ unsigned long cpu_rate, wmac_rate = 40000000;
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
@@ -101,6 +77,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("300500.uart", cpu_rate / 2);
ralink_clk_add("300c00.uartlite", cpu_rate / 2);
ralink_clk_add("400000.ethernet", cpu_rate / 2);
+ ralink_clk_add("480000.wmac", wmac_rate);
}
void __init ralink_of_remap(void)
@@ -140,4 +117,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_base = RT2880_SDRAM_BASE;
soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+
+ rt2880_pinmux_data = rt2880_pinmux_data_act;
}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index bb82a82da9e7..c40776ab67db 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -17,90 +17,78 @@
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/pinmux.h>
#include "common.h"
enum rt305x_soc_type rt305x_soc;
-static struct ralink_pinmux_grp mode_mux[] = {
- {
- .name = "i2c",
- .mask = RT305X_GPIO_MODE_I2C,
- .gpio_first = RT305X_GPIO_I2C_SD,
- .gpio_last = RT305X_GPIO_I2C_SCLK,
- }, {
- .name = "spi",
- .mask = RT305X_GPIO_MODE_SPI,
- .gpio_first = RT305X_GPIO_SPI_EN,
- .gpio_last = RT305X_GPIO_SPI_CLK,
- }, {
- .name = "uartlite",
- .mask = RT305X_GPIO_MODE_UART1,
- .gpio_first = RT305X_GPIO_UART1_TXD,
- .gpio_last = RT305X_GPIO_UART1_RXD,
- }, {
- .name = "jtag",
- .mask = RT305X_GPIO_MODE_JTAG,
- .gpio_first = RT305X_GPIO_JTAG_TDO,
- .gpio_last = RT305X_GPIO_JTAG_TDI,
- }, {
- .name = "mdio",
- .mask = RT305X_GPIO_MODE_MDIO,
- .gpio_first = RT305X_GPIO_MDIO_MDC,
- .gpio_last = RT305X_GPIO_MDIO_MDIO,
- }, {
- .name = "sdram",
- .mask = RT305X_GPIO_MODE_SDRAM,
- .gpio_first = RT305X_GPIO_SDRAM_MD16,
- .gpio_last = RT305X_GPIO_SDRAM_MD31,
- }, {
- .name = "rgmii",
- .mask = RT305X_GPIO_MODE_RGMII,
- .gpio_first = RT305X_GPIO_GE0_TXD0,
- .gpio_last = RT305X_GPIO_GE0_RXCLK,
- }, {0}
+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct rt2880_pmx_func uartf_func[] = {
+ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
+ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
+ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
+ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
+ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
+ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
+ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
+};
+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
+static struct rt2880_pmx_func rt5350_cs1_func[] = {
+ FUNC("spi_cs1", 0, 27, 1),
+ FUNC("wdg_cs1", 1, 27, 1),
+};
+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct rt2880_pmx_func rt3352_rgmii_func[] = {
+ FUNC("rgmii", 0, 24, 12)
+};
+static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
+static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
+static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
+static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
+
+static struct rt2880_pmx_group rt3050_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
+ RT305X_GPIO_MODE_UART0_SHIFT),
+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
+ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
+ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
+ { 0 }
};
-static struct ralink_pinmux_grp uart_mux[] = {
- {
- .name = "uartf",
- .mask = RT305X_GPIO_MODE_UARTF,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
- }, {
- .name = "pcm uartf",
- .mask = RT305X_GPIO_MODE_PCM_UARTF,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
- }, {
- .name = "pcm i2s",
- .mask = RT305X_GPIO_MODE_PCM_I2S,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
- }, {
- .name = "i2s uartf",
- .mask = RT305X_GPIO_MODE_I2S_UARTF,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
- }, {
- .name = "pcm gpio",
- .mask = RT305X_GPIO_MODE_PCM_GPIO,
- .gpio_first = RT305X_GPIO_10,
- .gpio_last = RT305X_GPIO_14,
- }, {
- .name = "gpio uartf",
- .mask = RT305X_GPIO_MODE_GPIO_UARTF,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_10,
- }, {
- .name = "gpio i2s",
- .mask = RT305X_GPIO_MODE_GPIO_I2S,
- .gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_10,
- }, {
- .name = "gpio",
- .mask = RT305X_GPIO_MODE_GPIO,
- }, {0}
+static struct rt2880_pmx_group rt3352_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
+ RT305X_GPIO_MODE_UART0_SHIFT),
+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
+ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
+ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
+ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
+ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
+ { 0 }
+};
+
+static struct rt2880_pmx_group rt5350_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
+ RT305X_GPIO_MODE_UART0_SHIFT),
+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
+ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
+ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
+ { 0 }
};
static void rt305x_wdt_reset(void)
@@ -114,14 +102,6 @@ static void rt305x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
}
-struct ralink_pinmux rt_gpio_pinmux = {
- .mode = mode_mux,
- .uart = uart_mux,
- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
- .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
- .wdt_reset = rt305x_wdt_reset,
-};
-
static unsigned long rt5350_get_mem_size(void)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
@@ -290,11 +270,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_base = RT305X_SDRAM_BASE;
if (soc_is_rt5350()) {
soc_info->mem_size = rt5350_get_mem_size();
+ rt2880_pinmux_data = rt5350_pinmux_data;
} else if (soc_is_rt305x() || soc_is_rt3350()) {
soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
+ rt2880_pinmux_data = rt3050_pinmux_data;
} else if (soc_is_rt3352()) {
soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
+ rt2880_pinmux_data = rt3352_pinmux_data;
}
}
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index b474ac284b83..86a535c770d8 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -17,132 +17,50 @@
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/pinmux.h>
#include "common.h"
-static struct ralink_pinmux_grp mode_mux[] = {
- {
- .name = "i2c",
- .mask = RT3883_GPIO_MODE_I2C,
- .gpio_first = RT3883_GPIO_I2C_SD,
- .gpio_last = RT3883_GPIO_I2C_SCLK,
- }, {
- .name = "spi",
- .mask = RT3883_GPIO_MODE_SPI,
- .gpio_first = RT3883_GPIO_SPI_CS0,
- .gpio_last = RT3883_GPIO_SPI_MISO,
- }, {
- .name = "uartlite",
- .mask = RT3883_GPIO_MODE_UART1,
- .gpio_first = RT3883_GPIO_UART1_TXD,
- .gpio_last = RT3883_GPIO_UART1_RXD,
- }, {
- .name = "jtag",
- .mask = RT3883_GPIO_MODE_JTAG,
- .gpio_first = RT3883_GPIO_JTAG_TDO,
- .gpio_last = RT3883_GPIO_JTAG_TCLK,
- }, {
- .name = "mdio",
- .mask = RT3883_GPIO_MODE_MDIO,
- .gpio_first = RT3883_GPIO_MDIO_MDC,
- .gpio_last = RT3883_GPIO_MDIO_MDIO,
- }, {
- .name = "ge1",
- .mask = RT3883_GPIO_MODE_GE1,
- .gpio_first = RT3883_GPIO_GE1_TXD0,
- .gpio_last = RT3883_GPIO_GE1_RXCLK,
- }, {
- .name = "ge2",
- .mask = RT3883_GPIO_MODE_GE2,
- .gpio_first = RT3883_GPIO_GE2_TXD0,
- .gpio_last = RT3883_GPIO_GE2_RXCLK,
- }, {
- .name = "pci",
- .mask = RT3883_GPIO_MODE_PCI,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {
- .name = "lna a",
- .mask = RT3883_GPIO_MODE_LNA_A,
- .gpio_first = RT3883_GPIO_LNA_PE_A0,
- .gpio_last = RT3883_GPIO_LNA_PE_A2,
- }, {
- .name = "lna g",
- .mask = RT3883_GPIO_MODE_LNA_G,
- .gpio_first = RT3883_GPIO_LNA_PE_G0,
- .gpio_last = RT3883_GPIO_LNA_PE_G2,
- }, {0}
+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct rt2880_pmx_func uartf_func[] = {
+ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
+ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
+ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
+ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8),
+ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4),
+ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
+ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
};
-
-static struct ralink_pinmux_grp uart_mux[] = {
- {
- .name = "uartf",
- .mask = RT3883_GPIO_MODE_UARTF,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_14,
- }, {
- .name = "pcm uartf",
- .mask = RT3883_GPIO_MODE_PCM_UARTF,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_14,
- }, {
- .name = "pcm i2s",
- .mask = RT3883_GPIO_MODE_PCM_I2S,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_14,
- }, {
- .name = "i2s uartf",
- .mask = RT3883_GPIO_MODE_I2S_UARTF,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_14,
- }, {
- .name = "pcm gpio",
- .mask = RT3883_GPIO_MODE_PCM_GPIO,
- .gpio_first = RT3883_GPIO_11,
- .gpio_last = RT3883_GPIO_14,
- }, {
- .name = "gpio uartf",
- .mask = RT3883_GPIO_MODE_GPIO_UARTF,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_10,
- }, {
- .name = "gpio i2s",
- .mask = RT3883_GPIO_MODE_GPIO_I2S,
- .gpio_first = RT3883_GPIO_7,
- .gpio_last = RT3883_GPIO_10,
- }, {
- .name = "gpio",
- .mask = RT3883_GPIO_MODE_GPIO,
- }, {0}
+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
+static struct rt2880_pmx_func pci_func[] = {
+ FUNC("pci-dev", 0, 40, 32),
+ FUNC("pci-host2", 1, 40, 32),
+ FUNC("pci-host1", 2, 40, 32),
+ FUNC("pci-fnc", 3, 40, 32)
};
-
-static struct ralink_pinmux_grp pci_mux[] = {
- {
- .name = "pci-dev",
- .mask = 0,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {
- .name = "pci-host2",
- .mask = 1,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {
- .name = "pci-host1",
- .mask = 2,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {
- .name = "pci-fnc",
- .mask = 3,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {
- .name = "pci-gpio",
- .mask = 7,
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {0}
+static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
+
+static struct rt2880_pmx_group rt3883_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
+ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
+ RT3883_GPIO_MODE_UART0_SHIFT),
+ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1),
+ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG),
+ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO),
+ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A),
+ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G),
+ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK,
+ RT3883_GPIO_MODE_PCI_SHIFT),
+ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1),
+ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2),
+ { 0 }
};
static void rt3883_wdt_reset(void)
@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
}
-struct ralink_pinmux rt_gpio_pinmux = {
- .mode = mode_mux,
- .uart = uart_mux,
- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
- .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
- .wdt_reset = rt3883_wdt_reset,
- .pci = pci_mux,
- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
- .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
-};
-
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
@@ -204,6 +111,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", 40000000);
ralink_clk_add("10100000.ethernet", sys_rate);
+ ralink_clk_add("10180000.wmac", 40000000);
}
void __init ralink_of_remap(void)
@@ -243,4 +151,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_base = RT3883_SDRAM_BASE;
soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+
+ rt2880_pinmux_data = rt3883_pinmux_data;
}
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index a18007613c30..5aa3df853082 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -79,7 +79,7 @@ static inline void rb532_set_bit(unsigned bitval,
*/
static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
{
- return (readl(ioaddr) & (1 << offset));
+ return readl(ioaddr) & (1 << offset);
}
/*
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index a757ded437cd..657210e767c2 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -122,8 +122,8 @@ void __init prom_setup_cmdline(void)
void __init prom_init(void)
{
struct ddr_ram __iomem *ddr;
- phys_t memsize;
- phys_t ddrbase;
+ phys_addr_t memsize;
+ phys_addr_t ddrbase;
ddr = ioremap_nocache(ddr_reg[0].start,
ddr_reg[0].end - ddr_reg[0].start);
@@ -133,8 +133,8 @@ void __init prom_init(void)
return;
}
- ddrbase = (phys_t)&ddr->ddrbase;
- memsize = (phys_t)&ddr->ddrmask;
+ ddrbase = (phys_addr_t)&ddr->ddrbase;
+ memsize = (phys_addr_t)&ddr->ddrmask;
memsize = 0 - memsize;
prom_setup_cmdline();
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 7cec0a4e527d..6b009c45abed 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -24,14 +24,12 @@ EXPORT_SYMBOL(sgimc);
static inline unsigned long get_bank_addr(unsigned int memconfig)
{
- return ((memconfig & SGIMC_MCONFIG_BASEADDR) <<
- ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 24 : 22));
+ return (memconfig & SGIMC_MCONFIG_BASEADDR) << ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 24 : 22);
}
static inline unsigned long get_bank_size(unsigned int memconfig)
{
- return ((memconfig & SGIMC_MCONFIG_RMASK) + 0x0100) <<
- ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 16 : 14);
+ return ((memconfig & SGIMC_MCONFIG_RMASK) + 0x0100) << ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 16 : 14);
}
static inline unsigned int get_bank_config(int bank)
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 3f47346608d7..712cc0f6a58d 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -338,7 +338,7 @@ static int check_microtlb(u32 hi, u32 lo, unsigned long vaddr)
PHYS_TO_XKSEG_UNCACHED(pte);
a = (a & 0x3f) << 6; /* PFN */
a += vaddr & ((1 << pgsz) - 1);
- return (cpu_err_addr == a);
+ return cpu_err_addr == a;
}
}
}
@@ -351,7 +351,7 @@ static int check_vdma_memaddr(void)
u32 a = sgimc->maddronly;
if (!(sgimc->dma_ctrl & 0x100)) /* Xlate-bit clear ? */
- return (cpu_err_addr == a);
+ return cpu_err_addr == a;
if (check_microtlb(sgimc->dtlb_hi0, sgimc->dtlb_lo0, a) ||
check_microtlb(sgimc->dtlb_hi1, sgimc->dtlb_lo1, a) ||
@@ -367,7 +367,7 @@ static int check_vdma_gioaddr(void)
if (gio_err_stat & GIO_ERRMASK) {
u32 a = sgimc->gio_dma_trans;
a = (sgimc->gmaddronly & ~a) | (sgimc->gio_dma_sbits & a);
- return (gio_err_addr == a);
+ return gio_err_addr == a;
}
return 0;
}
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 7a53b1e28a93..ecbb62f339c5 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -125,8 +125,7 @@ unsigned long node_getfirstfree(cnodeid_t cnode)
#endif
offset = PAGE_ALIGN((unsigned long)(&_end)) - loadbase;
if ((cnode == 0) || (cpu_isset(cnode, ktext_repmask)))
- return (TO_NODE(nasid, offset) >> PAGE_SHIFT);
+ return TO_NODE(nasid, offset) >> PAGE_SHIFT;
else
- return (KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >>
- PAGE_SHIFT);
+ return KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT;
}
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index a304bcc37e4f..0b68469e063f 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -42,8 +42,7 @@ static int fine_mode;
static int is_fine_dirmode(void)
{
- return (((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK)
- >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE);
+ return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE;
}
static hubreg_t get_region(cnodeid_t cnode)
@@ -288,7 +287,7 @@ static unsigned long __init slot_psize_compute(cnodeid_t node, int slot)
if (size <= 128) {
if (slot % 4 == 0) {
size <<= 20; /* size in bytes */
- return(size >> PAGE_SHIFT);
+ return size >> PAGE_SHIFT;
} else
return 0;
} else {
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index 588e1806a1a3..c1a11a11db7f 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -38,7 +38,7 @@
#define MAX_RAM_SIZE (~0ULL)
#else
#ifdef CONFIG_HIGHMEM
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
#define MAX_RAM_SIZE (~0ULL)
#else
#define MAX_RAM_SIZE (0xffffffffULL)
@@ -49,8 +49,8 @@
#endif
#define SIBYTE_MAX_MEM_REGIONS 8
-phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
-phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
+phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
+phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
unsigned int board_mem_region_count;
int cfe_cons_handle;
@@ -96,7 +96,7 @@ static void __noreturn cfe_linux_halt(void)
static __init void prom_meminit(void)
{
- u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
+ u64 addr, size, type; /* regardless of PHYS_ADDR_T_64BIT */
int mem_flags = 0;
unsigned int idx;
int rd_flag;
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
index 9480c14ec66a..1cecdcf85cf1 100644
--- a/arch/mips/sibyte/swarm/platform.c
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -50,7 +50,7 @@ static struct platform_device swarm_pata_device = {
static int __init swarm_pata_init(void)
{
u8 __iomem *base;
- phys_t offset, size;
+ phys_addr_t offset, size;
struct resource *r;
if (!SIBYTE_HAVE_IDE)
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index b732600b47f5..e62466445f08 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -109,7 +109,7 @@ static int m41t81_read(uint8_t addr)
return -1;
}
- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return __raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff;
}
static int m41t81_write(uint8_t addr, int b)
@@ -229,5 +229,5 @@ int m41t81_probe(void)
tmp = m41t81_read(M41T81REG_SC);
m41t81_write(M41T81REG_SC, tmp & 0x7f);
- return (m41t81_read(M41T81REG_SC) != -1);
+ return m41t81_read(M41T81REG_SC) != -1;
}
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 178a824b28d4..50a82c495427 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -84,7 +84,7 @@ static int xicor_read(uint8_t addr)
return -1;
}
- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return __raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff;
}
static int xicor_write(uint8_t addr, int b)
@@ -206,5 +206,5 @@ unsigned long xicor_get_time(void)
int xicor_probe(void)
{
- return (xicor_read(X1241REG_SC) != -1);
+ return xicor_read(X1241REG_SC) != -1;
}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 3462c831d0ea..494fb0a475ac 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -76,7 +76,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
printk("DBE physical address: %010Lx\n",
__read_64bit_c0_register($26, 1));
}
- return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
+ return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
}
enum swarm_rtc_type {
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index e714d6ce9a82..a4664cb6c1e1 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -29,8 +29,8 @@ static void __init tx4927_wdr_init(void)
{
/* report watchdog reset status */
if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)
- pr_warning("Watchdog reset detected at 0x%lx\n",
- read_c0_errorepc());
+ pr_warn("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
/* clear WatchDogReset (W1C) */
tx4927_ccfg_set(TX4927_CCFG_WDRST);
/* do reset on watchdog */
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 0a3bf2dfaba1..58cdb2aba5e1 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -31,8 +31,8 @@ static void __init tx4938_wdr_init(void)
{
/* report watchdog reset status */
if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST)
- pr_warning("Watchdog reset detected at 0x%lx\n",
- read_c0_errorepc());
+ pr_warn("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
/* clear WatchDogReset (W1C) */
tx4938_ccfg_set(TX4938_CCFG_WDRST);
/* do reset on watchdog */
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index b7eccbd17bf7..e3733cde50d6 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -35,8 +35,8 @@ static void __init tx4939_wdr_init(void)
{
/* report watchdog reset status */
if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST)
- pr_warning("Watchdog reset detected at 0x%lx\n",
- read_c0_errorepc());
+ pr_warn("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
/* clear WatchDogReset (W1C) */
tx4939_ccfg_set(TX4939_CCFG_WDRST);
/* do reset on watchdog */
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 5ec69c3d409d..04faf6df959f 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -20,6 +20,9 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_nvram.h>
+#endif
enum bcma_boot_dev {
BCMA_BOOT_DEV_UNK = 0,
@@ -316,10 +319,16 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
switch (boot_dev) {
case BCMA_BOOT_DEV_PARALLEL:
case BCMA_BOOT_DEV_SERIAL:
- /* TODO: Init NVRAM using BCMA_SOC_FLASH2 window */
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2,
+ BCMA_SOC_FLASH2_SZ);
+#endif
break;
case BCMA_BOOT_DEV_NAND:
- /* TODO: Init NVRAM using BCMA_SOC_FLASH1 window */
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1,
+ BCMA_SOC_FLASH1_SZ);
+#endif
break;
default:
break;
diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
index f20b750235f6..ca80103ac188 100644
--- a/drivers/clk/clk-ls1x.c
+++ b/drivers/clk/clk-ls1x.c
@@ -15,7 +15,8 @@
#include <loongson1.h>
-#define OSC 33
+#define OSC (33 * 1000000)
+#define DIV_APB 2
static DEFINE_SPINLOCK(_lock);
@@ -29,13 +30,12 @@ static void ls1x_pll_clk_disable(struct clk_hw *hw)
}
static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+ unsigned long parent_rate)
{
u32 pll, rate;
pll = __raw_readl(LS1X_CLK_PLL_FREQ);
- rate = ((12 + (pll & 0x3f)) * 1000000) +
- ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
+ rate = 12 + (pll & 0x3f) + (((pll >> 8) & 0x3ff) >> 10);
rate *= OSC;
rate >>= 1;
@@ -48,8 +48,10 @@ static const struct clk_ops ls1x_pll_clk_ops = {
.recalc_rate = ls1x_pll_recalc_rate,
};
-static struct clk * __init clk_register_pll(struct device *dev,
- const char *name, const char *parent_name, unsigned long flags)
+static struct clk *__init clk_register_pll(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags)
{
struct clk_hw *hw;
struct clk *clk;
@@ -78,34 +80,83 @@ static struct clk * __init clk_register_pll(struct device *dev,
return clk;
}
+static const char const *cpu_parents[] = { "cpu_clk_div", "osc_33m_clk", };
+static const char const *ahb_parents[] = { "ahb_clk_div", "osc_33m_clk", };
+static const char const *dc_parents[] = { "dc_clk_div", "osc_33m_clk", };
+
void __init ls1x_clk_init(void)
{
struct clk *clk;
- clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
- clk_prepare_enable(clk);
-
- clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
- CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
- DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
- clk_prepare_enable(clk);
- clk_register_clkdev(clk, "cpu", NULL);
-
- clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
- CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
- DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
- clk_prepare_enable(clk);
- clk_register_clkdev(clk, "dc", NULL);
-
- clk = clk_register_divider(NULL, "ahb_clk", "pll_clk",
- CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
- DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
- clk_prepare_enable(clk);
- clk_register_clkdev(clk, "ahb", NULL);
+ clk = clk_register_fixed_rate(NULL, "osc_33m_clk", NULL, CLK_IS_ROOT,
+ OSC);
+ clk_register_clkdev(clk, "osc_33m_clk", NULL);
+
+ /* clock derived from 33 MHz OSC clk */
+ clk = clk_register_pll(NULL, "pll_clk", "osc_33m_clk", 0);
+ clk_register_clkdev(clk, "pll_clk", NULL);
+
+ /* clock derived from PLL clk */
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ CPU CLK
+ * \___ PLL ___ CPU DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "cpu_clk_div", "pll_clk",
+ CLK_GET_RATE_NOCACHE, LS1X_CLK_PLL_DIV,
+ DIV_CPU_SHIFT, DIV_CPU_WIDTH,
+ CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ROUND_CLOSEST, &_lock);
+ clk_register_clkdev(clk, "cpu_clk_div", NULL);
+ clk = clk_register_mux(NULL, "cpu_clk", cpu_parents,
+ ARRAY_SIZE(cpu_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_CPU_SHIFT, BYPASS_CPU_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ DC CLK
+ * \___ PLL ___ DC DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "dc_clk_div", "pll_clk",
+ 0, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+ DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_register_clkdev(clk, "dc_clk_div", NULL);
+ clk = clk_register_mux(NULL, "dc_clk", dc_parents,
+ ARRAY_SIZE(dc_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_DC_SHIFT, BYPASS_DC_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "dc_clk", NULL);
+
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ DDR CLK
+ * \___ PLL ___ DDR DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "ahb_clk_div", "pll_clk",
+ 0, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+ DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED,
+ &_lock);
+ clk_register_clkdev(clk, "ahb_clk_div", NULL);
+ clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
+ ARRAY_SIZE(ahb_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_DDR_SHIFT, BYPASS_DDR_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
clk_register_clkdev(clk, "stmmaceth", NULL);
- clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2);
- clk_prepare_enable(clk);
- clk_register_clkdev(clk, "apb", NULL);
+ /* clock derived from AHB clk */
+ /* APB clk is always half of the AHB clk */
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
+ DIV_APB);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+ clk_register_clkdev(clk, "ls1x_i2c", NULL);
+ clk_register_clkdev(clk, "ls1x_pwmtimer", NULL);
+ clk_register_clkdev(clk, "ls1x_spi", NULL);
+ clk_register_clkdev(clk, "ls1x_wdt", NULL);
clk_register_clkdev(clk, "serial8250", NULL);
}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f657a48d20eb..fc01ec27d3c8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -224,4 +224,9 @@ config CLKSRC_VERSATILE
ARM Versatile, RealView and Versatile Express reference
platforms.
+config CLKSRC_MIPS_GIC
+ bool
+ depends on MIPS_GIC
+ select CLKSRC_OF
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index fae0435cc23d..94d90b24b56b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
+obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
new file mode 100644
index 000000000000..3bd31b1321f6
--- /dev/null
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -0,0 +1,166 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
+ */
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/notifier.h>
+#include <linux/of_irq.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
+static int gic_timer_irq;
+static unsigned int gic_frequency;
+
+static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ u64 cnt;
+ int res;
+
+ cnt = gic_read_count();
+ cnt += (u64)delta;
+ gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
+ res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
+ return res;
+}
+
+static void gic_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* Nothing to do ... */
+}
+
+static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+
+ gic_write_compare(gic_read_compare());
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+}
+
+struct irqaction gic_compare_irqaction = {
+ .handler = gic_compare_interrupt,
+ .percpu_dev_id = &gic_clockevent_device,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+ .name = "timer",
+};
+
+static void gic_clockevent_cpu_init(struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+
+ cd->name = "MIPS GIC";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_C3STOP;
+
+ cd->rating = 350;
+ cd->irq = gic_timer_irq;
+ cd->cpumask = cpumask_of(cpu);
+ cd->set_next_event = gic_next_event;
+ cd->set_mode = gic_set_clock_mode;
+
+ clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
+
+ enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
+}
+
+static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
+{
+ disable_percpu_irq(gic_timer_irq);
+}
+
+static int gic_cpu_notifier(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ gic_clockevent_cpu_init(this_cpu_ptr(&gic_clockevent_device));
+ break;
+ case CPU_DYING:
+ gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gic_cpu_nb = {
+ .notifier_call = gic_cpu_notifier,
+};
+
+static int gic_clockevent_init(void)
+{
+ if (!cpu_has_counter || !gic_frequency)
+ return -ENXIO;
+
+ setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
+
+ register_cpu_notifier(&gic_cpu_nb);
+
+ gic_clockevent_cpu_init(this_cpu_ptr(&gic_clockevent_device));
+
+ return 0;
+}
+
+static cycle_t gic_hpt_read(struct clocksource *cs)
+{
+ return gic_read_count();
+}
+
+static struct clocksource gic_clocksource = {
+ .name = "GIC",
+ .read = gic_hpt_read,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init __gic_clocksource_init(void)
+{
+ /* Set clocksource mask. */
+ gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width());
+
+ /* Calculate a somewhat reasonable rating value. */
+ gic_clocksource.rating = 200 + gic_frequency / 10000000;
+
+ clocksource_register_hz(&gic_clocksource, gic_frequency);
+
+ gic_clockevent_init();
+}
+
+void __init gic_clocksource_init(unsigned int frequency)
+{
+ gic_frequency = frequency;
+ gic_timer_irq = MIPS_GIC_IRQ_BASE +
+ GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
+
+ __gic_clocksource_init();
+}
+
+static void __init gic_clocksource_of_init(struct device_node *node)
+{
+ if (WARN_ON(!gic_present || !node->parent ||
+ !of_device_is_compatible(node->parent, "mti,gic")))
+ return;
+
+ if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) {
+ pr_err("GIC frequency not specified.\n");
+ return;
+ }
+ gic_timer_irq = irq_of_parse_and_map(node, 0);
+ if (!gic_timer_irq) {
+ pr_err("GIC timer IRQ not specified.\n");
+ return;
+ }
+
+ __gic_clocksource_init();
+}
+CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+ gic_clocksource_of_init);
diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c
index 17686caf64d5..0659ec9c4488 100644
--- a/drivers/dma/txx9dmac.c
+++ b/drivers/dma/txx9dmac.c
@@ -76,7 +76,7 @@ static void channel64_write_CHAR(const struct txx9dmac_chan *dc, dma_addr_t val)
static void channel64_clear_CHAR(const struct txx9dmac_chan *dc)
{
-#if defined(CONFIG_32BIT) && !defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_PHYS_ADDR_T_64BIT)
channel64_writel(dc, CHAR, 0);
channel64_writel(dc, __pad_CHAR, 0);
#else
diff --git a/drivers/dma/txx9dmac.h b/drivers/dma/txx9dmac.h
index f5a760598882..f6517b928bab 100644
--- a/drivers/dma/txx9dmac.h
+++ b/drivers/dma/txx9dmac.h
@@ -67,7 +67,7 @@ static inline bool txx9_dma_have_SMPCHN(void)
/* Hardware register definitions. */
struct txx9dmac_cregs {
-#if defined(CONFIG_32BIT) && !defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_PHYS_ADDR_T_64BIT)
TXX9_DMA_REG32(CHAR); /* Chain Address Register */
#else
u64 CHAR; /* Chain Address Register */
@@ -201,7 +201,7 @@ static inline bool is_dmac64(const struct txx9dmac_chan *dc)
#ifdef TXX9_DMA_USE_SIMPLE_CHAIN
/* Hardware descriptor definition. (for simple-chain) */
struct txx9dmac_hwdesc {
-#if defined(CONFIG_32BIT) && !defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_32BIT) && !defined(CONFIG_PHYS_ADDR_T_64BIT)
TXX9_DMA_REG32(CHAR);
#else
u64 CHAR;
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 9efe5f10f97b..e12cb23d786c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -130,3 +130,7 @@ config KEYSTONE_IRQ
help
Support for Texas Instruments Keystone 2 IRQ controller IP which
is part of the Keystone 2 IPC mechanism
+
+config MIPS_GIC
+ bool
+ select MIPS_CM
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index f0909d05eae3..4954a314c31e 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
+obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
new file mode 100644
index 000000000000..2b0468e3df6a
--- /dev/null
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -0,0 +1,789 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
+ */
+#include <linux/bitmap.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/of_address.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+
+#include <asm/mips-cm.h>
+#include <asm/setup.h>
+#include <asm/traps.h>
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "irqchip.h"
+
+unsigned int gic_present;
+
+struct gic_pcpu_mask {
+ DECLARE_BITMAP(pcpu_mask, GIC_MAX_INTRS);
+};
+
+static void __iomem *gic_base;
+static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
+static DEFINE_SPINLOCK(gic_lock);
+static struct irq_domain *gic_irq_domain;
+static int gic_shared_intrs;
+static int gic_vpes;
+static unsigned int gic_cpu_pin;
+static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
+
+static void __gic_irq_dispatch(void);
+
+static inline unsigned int gic_read(unsigned int reg)
+{
+ return __raw_readl(gic_base + reg);
+}
+
+static inline void gic_write(unsigned int reg, unsigned int val)
+{
+ __raw_writel(val, gic_base + reg);
+}
+
+static inline void gic_update_bits(unsigned int reg, unsigned int mask,
+ unsigned int val)
+{
+ unsigned int regval;
+
+ regval = gic_read(reg);
+ regval &= ~mask;
+ regval |= val;
+ gic_write(reg, regval);
+}
+
+static inline void gic_reset_mask(unsigned int intr)
+{
+ gic_write(GIC_REG(SHARED, GIC_SH_RMASK) + GIC_INTR_OFS(intr),
+ 1 << GIC_INTR_BIT(intr));
+}
+
+static inline void gic_set_mask(unsigned int intr)
+{
+ gic_write(GIC_REG(SHARED, GIC_SH_SMASK) + GIC_INTR_OFS(intr),
+ 1 << GIC_INTR_BIT(intr));
+}
+
+static inline void gic_set_polarity(unsigned int intr, unsigned int pol)
+{
+ gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_POLARITY) +
+ GIC_INTR_OFS(intr), 1 << GIC_INTR_BIT(intr),
+ pol << GIC_INTR_BIT(intr));
+}
+
+static inline void gic_set_trigger(unsigned int intr, unsigned int trig)
+{
+ gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_TRIGGER) +
+ GIC_INTR_OFS(intr), 1 << GIC_INTR_BIT(intr),
+ trig << GIC_INTR_BIT(intr));
+}
+
+static inline void gic_set_dual_edge(unsigned int intr, unsigned int dual)
+{
+ gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_DUAL) + GIC_INTR_OFS(intr),
+ 1 << GIC_INTR_BIT(intr),
+ dual << GIC_INTR_BIT(intr));
+}
+
+static inline void gic_map_to_pin(unsigned int intr, unsigned int pin)
+{
+ gic_write(GIC_REG(SHARED, GIC_SH_INTR_MAP_TO_PIN_BASE) +
+ GIC_SH_MAP_TO_PIN(intr), GIC_MAP_TO_PIN_MSK | pin);
+}
+
+static inline void gic_map_to_vpe(unsigned int intr, unsigned int vpe)
+{
+ gic_write(GIC_REG(SHARED, GIC_SH_INTR_MAP_TO_VPE_BASE) +
+ GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe),
+ GIC_SH_MAP_TO_VPE_REG_BIT(vpe));
+}
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+cycle_t gic_read_count(void)
+{
+ unsigned int hi, hi2, lo;
+
+ do {
+ hi = gic_read(GIC_REG(SHARED, GIC_SH_COUNTER_63_32));
+ lo = gic_read(GIC_REG(SHARED, GIC_SH_COUNTER_31_00));
+ hi2 = gic_read(GIC_REG(SHARED, GIC_SH_COUNTER_63_32));
+ } while (hi2 != hi);
+
+ return (((cycle_t) hi) << 32) + lo;
+}
+
+unsigned int gic_get_count_width(void)
+{
+ unsigned int bits, config;
+
+ config = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
+ bits = 32 + 4 * ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >>
+ GIC_SH_CONFIG_COUNTBITS_SHF);
+
+ return bits;
+}
+
+void gic_write_compare(cycle_t cnt)
+{
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI),
+ (int)(cnt >> 32));
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO),
+ (int)(cnt & 0xffffffff));
+}
+
+void gic_write_cpu_compare(cycle_t cnt, int cpu)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), cpu);
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_HI),
+ (int)(cnt >> 32));
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_LO),
+ (int)(cnt & 0xffffffff));
+
+ local_irq_restore(flags);
+}
+
+cycle_t gic_read_compare(void)
+{
+ unsigned int hi, lo;
+
+ hi = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI));
+ lo = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO));
+
+ return (((cycle_t) hi) << 32) + lo;
+}
+#endif
+
+static bool gic_local_irq_is_routable(int intr)
+{
+ u32 vpe_ctl;
+
+ /* All local interrupts are routable in EIC mode. */
+ if (cpu_has_veic)
+ return true;
+
+ vpe_ctl = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_CTL));
+ switch (intr) {
+ case GIC_LOCAL_INT_TIMER:
+ return vpe_ctl & GIC_VPE_CTL_TIMER_RTBL_MSK;
+ case GIC_LOCAL_INT_PERFCTR:
+ return vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK;
+ case GIC_LOCAL_INT_FDC:
+ return vpe_ctl & GIC_VPE_CTL_FDC_RTBL_MSK;
+ case GIC_LOCAL_INT_SWINT0:
+ case GIC_LOCAL_INT_SWINT1:
+ return vpe_ctl & GIC_VPE_CTL_SWINT_RTBL_MSK;
+ default:
+ return true;
+ }
+}
+
+unsigned int gic_get_timer_pending(void)
+{
+ unsigned int vpe_pending;
+
+ vpe_pending = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_PEND));
+ return vpe_pending & GIC_VPE_PEND_TIMER_MSK;
+}
+
+static void gic_bind_eic_interrupt(int irq, int set)
+{
+ /* Convert irq vector # to hw int # */
+ irq -= GIC_PIN_TO_VEC_OFFSET;
+
+ /* Set irq to use shadow set */
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_EIC_SHADOW_SET_BASE) +
+ GIC_VPE_EIC_SS(irq), set);
+}
+
+void gic_send_ipi(unsigned int intr)
+{
+ gic_write(GIC_REG(SHARED, GIC_SH_WEDGE), GIC_SH_WEDGE_SET(intr));
+}
+
+int gic_get_c0_compare_int(void)
+{
+ if (!gic_local_irq_is_routable(GIC_LOCAL_INT_TIMER))
+ return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ return irq_create_mapping(gic_irq_domain,
+ GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_TIMER));
+}
+
+int gic_get_c0_perfcount_int(void)
+{
+ if (!gic_local_irq_is_routable(GIC_LOCAL_INT_PERFCTR)) {
+ /* Is the erformance counter shared with the timer? */
+ if (cp0_perfcount_irq < 0)
+ return -1;
+ return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ }
+ return irq_create_mapping(gic_irq_domain,
+ GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_PERFCTR));
+}
+
+static unsigned int gic_get_int(void)
+{
+ unsigned int i;
+ unsigned long *pcpu_mask;
+ unsigned long pending_reg, intrmask_reg;
+ DECLARE_BITMAP(pending, GIC_MAX_INTRS);
+ DECLARE_BITMAP(intrmask, GIC_MAX_INTRS);
+
+ /* Get per-cpu bitmaps */
+ pcpu_mask = pcpu_masks[smp_processor_id()].pcpu_mask;
+
+ pending_reg = GIC_REG(SHARED, GIC_SH_PEND);
+ intrmask_reg = GIC_REG(SHARED, GIC_SH_MASK);
+
+ for (i = 0; i < BITS_TO_LONGS(gic_shared_intrs); i++) {
+ pending[i] = gic_read(pending_reg);
+ intrmask[i] = gic_read(intrmask_reg);
+ pending_reg += 0x4;
+ intrmask_reg += 0x4;
+ }
+
+ bitmap_and(pending, pending, intrmask, gic_shared_intrs);
+ bitmap_and(pending, pending, pcpu_mask, gic_shared_intrs);
+
+ return find_first_bit(pending, gic_shared_intrs);
+}
+
+static void gic_mask_irq(struct irq_data *d)
+{
+ gic_reset_mask(GIC_HWIRQ_TO_SHARED(d->hwirq));
+}
+
+static void gic_unmask_irq(struct irq_data *d)
+{
+ gic_set_mask(GIC_HWIRQ_TO_SHARED(d->hwirq));
+}
+
+static void gic_ack_irq(struct irq_data *d)
+{
+ unsigned int irq = GIC_HWIRQ_TO_SHARED(d->hwirq);
+
+ gic_write(GIC_REG(SHARED, GIC_SH_WEDGE), GIC_SH_WEDGE_CLR(irq));
+}
+
+static int gic_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int irq = GIC_HWIRQ_TO_SHARED(d->hwirq);
+ unsigned long flags;
+ bool is_edge;
+
+ spin_lock_irqsave(&gic_lock, flags);
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ gic_set_polarity(irq, GIC_POL_NEG);
+ gic_set_trigger(irq, GIC_TRIG_EDGE);
+ gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ gic_set_polarity(irq, GIC_POL_POS);
+ gic_set_trigger(irq, GIC_TRIG_EDGE);
+ gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ /* polarity is irrelevant in this case */
+ gic_set_trigger(irq, GIC_TRIG_EDGE);
+ gic_set_dual_edge(irq, GIC_TRIG_DUAL_ENABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gic_set_polarity(irq, GIC_POL_NEG);
+ gic_set_trigger(irq, GIC_TRIG_LEVEL);
+ gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = false;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ default:
+ gic_set_polarity(irq, GIC_POL_POS);
+ gic_set_trigger(irq, GIC_TRIG_LEVEL);
+ gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = false;
+ break;
+ }
+
+ if (is_edge) {
+ __irq_set_chip_handler_name_locked(d->irq,
+ &gic_edge_irq_controller,
+ handle_edge_irq, NULL);
+ } else {
+ __irq_set_chip_handler_name_locked(d->irq,
+ &gic_level_irq_controller,
+ handle_level_irq, NULL);
+ }
+ spin_unlock_irqrestore(&gic_lock, flags);
+
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
+ bool force)
+{
+ unsigned int irq = GIC_HWIRQ_TO_SHARED(d->hwirq);
+ cpumask_t tmp = CPU_MASK_NONE;
+ unsigned long flags;
+ int i;
+
+ cpumask_and(&tmp, cpumask, cpu_online_mask);
+ if (cpus_empty(tmp))
+ return -EINVAL;
+
+ /* Assumption : cpumask refers to a single CPU */
+ spin_lock_irqsave(&gic_lock, flags);
+
+ /* Re-route this IRQ */
+ gic_map_to_vpe(irq, first_cpu(tmp));
+
+ /* Update the pcpu_masks */
+ for (i = 0; i < NR_CPUS; i++)
+ clear_bit(irq, pcpu_masks[i].pcpu_mask);
+ set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
+
+ cpumask_copy(d->affinity, cpumask);
+ spin_unlock_irqrestore(&gic_lock, flags);
+
+ return IRQ_SET_MASK_OK_NOCOPY;
+}
+#endif
+
+static struct irq_chip gic_level_irq_controller = {
+ .name = "MIPS GIC",
+ .irq_mask = gic_mask_irq,
+ .irq_unmask = gic_unmask_irq,
+ .irq_set_type = gic_set_type,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = gic_set_affinity,
+#endif
+};
+
+static struct irq_chip gic_edge_irq_controller = {
+ .name = "MIPS GIC",
+ .irq_ack = gic_ack_irq,
+ .irq_mask = gic_mask_irq,
+ .irq_unmask = gic_unmask_irq,
+ .irq_set_type = gic_set_type,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = gic_set_affinity,
+#endif
+};
+
+static unsigned int gic_get_local_int(void)
+{
+ unsigned long pending, masked;
+
+ pending = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_PEND));
+ masked = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_MASK));
+
+ bitmap_and(&pending, &pending, &masked, GIC_NUM_LOCAL_INTRS);
+
+ return find_first_bit(&pending, GIC_NUM_LOCAL_INTRS);
+}
+
+static void gic_mask_local_irq(struct irq_data *d)
+{
+ int intr = GIC_HWIRQ_TO_LOCAL(d->hwirq);
+
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_RMASK), 1 << intr);
+}
+
+static void gic_unmask_local_irq(struct irq_data *d)
+{
+ int intr = GIC_HWIRQ_TO_LOCAL(d->hwirq);
+
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_SMASK), 1 << intr);
+}
+
+static struct irq_chip gic_local_irq_controller = {
+ .name = "MIPS GIC Local",
+ .irq_mask = gic_mask_local_irq,
+ .irq_unmask = gic_unmask_local_irq,
+};
+
+static void gic_mask_local_irq_all_vpes(struct irq_data *d)
+{
+ int intr = GIC_HWIRQ_TO_LOCAL(d->hwirq);
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gic_lock, flags);
+ for (i = 0; i < gic_vpes; i++) {
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_RMASK), 1 << intr);
+ }
+ spin_unlock_irqrestore(&gic_lock, flags);
+}
+
+static void gic_unmask_local_irq_all_vpes(struct irq_data *d)
+{
+ int intr = GIC_HWIRQ_TO_LOCAL(d->hwirq);
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gic_lock, flags);
+ for (i = 0; i < gic_vpes; i++) {
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_SMASK), 1 << intr);
+ }
+ spin_unlock_irqrestore(&gic_lock, flags);
+}
+
+static struct irq_chip gic_all_vpes_local_irq_controller = {
+ .name = "MIPS GIC Local",
+ .irq_mask = gic_mask_local_irq_all_vpes,
+ .irq_unmask = gic_unmask_local_irq_all_vpes,
+};
+
+static void __gic_irq_dispatch(void)
+{
+ unsigned int intr, virq;
+
+ while ((intr = gic_get_local_int()) != GIC_NUM_LOCAL_INTRS) {
+ virq = irq_linear_revmap(gic_irq_domain,
+ GIC_LOCAL_TO_HWIRQ(intr));
+ do_IRQ(virq);
+ }
+
+ while ((intr = gic_get_int()) != gic_shared_intrs) {
+ virq = irq_linear_revmap(gic_irq_domain,
+ GIC_SHARED_TO_HWIRQ(intr));
+ do_IRQ(virq);
+ }
+}
+
+static void gic_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ __gic_irq_dispatch();
+}
+
+#ifdef CONFIG_MIPS_GIC_IPI
+static int gic_resched_int_base;
+static int gic_call_int_base;
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return gic_resched_int_base + cpu;
+}
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return gic_call_int_base + cpu;
+}
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+ scheduler_ipi();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI call"
+};
+
+static __init void gic_ipi_init_one(unsigned int intr, int cpu,
+ struct irqaction *action)
+{
+ int virq = irq_create_mapping(gic_irq_domain,
+ GIC_SHARED_TO_HWIRQ(intr));
+ int i;
+
+ gic_map_to_vpe(intr, cpu);
+ for (i = 0; i < NR_CPUS; i++)
+ clear_bit(intr, pcpu_masks[i].pcpu_mask);
+ set_bit(intr, pcpu_masks[cpu].pcpu_mask);
+
+ irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+ irq_set_handler(virq, handle_percpu_irq);
+ setup_irq(virq, action);
+}
+
+static __init void gic_ipi_init(void)
+{
+ int i;
+
+ /* Use last 2 * NR_CPUS interrupts as IPIs */
+ gic_resched_int_base = gic_shared_intrs - nr_cpu_ids;
+ gic_call_int_base = gic_resched_int_base - nr_cpu_ids;
+
+ for (i = 0; i < nr_cpu_ids; i++) {
+ gic_ipi_init_one(gic_call_int_base + i, i, &irq_call);
+ gic_ipi_init_one(gic_resched_int_base + i, i, &irq_resched);
+ }
+}
+#else
+static inline void gic_ipi_init(void)
+{
+}
+#endif
+
+static void __init gic_basic_init(void)
+{
+ unsigned int i;
+
+ board_bind_eic_interrupt = &gic_bind_eic_interrupt;
+
+ /* Setup defaults */
+ for (i = 0; i < gic_shared_intrs; i++) {
+ gic_set_polarity(i, GIC_POL_POS);
+ gic_set_trigger(i, GIC_TRIG_LEVEL);
+ gic_reset_mask(i);
+ }
+
+ for (i = 0; i < gic_vpes; i++) {
+ unsigned int j;
+
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
+ for (j = 0; j < GIC_NUM_LOCAL_INTRS; j++) {
+ if (!gic_local_irq_is_routable(j))
+ continue;
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_RMASK), 1 << j);
+ }
+ }
+}
+
+static int gic_local_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ int intr = GIC_HWIRQ_TO_LOCAL(hw);
+ int ret = 0;
+ int i;
+ unsigned long flags;
+
+ if (!gic_local_irq_is_routable(intr))
+ return -EPERM;
+
+ /*
+ * HACK: These are all really percpu interrupts, but the rest
+ * of the MIPS kernel code does not use the percpu IRQ API for
+ * the CP0 timer and performance counter interrupts.
+ */
+ if (intr != GIC_LOCAL_INT_TIMER && intr != GIC_LOCAL_INT_PERFCTR) {
+ irq_set_chip_and_handler(virq,
+ &gic_local_irq_controller,
+ handle_percpu_devid_irq);
+ irq_set_percpu_devid(virq);
+ } else {
+ irq_set_chip_and_handler(virq,
+ &gic_all_vpes_local_irq_controller,
+ handle_percpu_irq);
+ }
+
+ spin_lock_irqsave(&gic_lock, flags);
+ for (i = 0; i < gic_vpes; i++) {
+ u32 val = GIC_MAP_TO_PIN_MSK | gic_cpu_pin;
+
+ gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
+
+ switch (intr) {
+ case GIC_LOCAL_INT_WD:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_WD_MAP), val);
+ break;
+ case GIC_LOCAL_INT_COMPARE:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_MAP), val);
+ break;
+ case GIC_LOCAL_INT_TIMER:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_TIMER_MAP), val);
+ break;
+ case GIC_LOCAL_INT_PERFCTR:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP), val);
+ break;
+ case GIC_LOCAL_INT_SWINT0:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_SWINT0_MAP), val);
+ break;
+ case GIC_LOCAL_INT_SWINT1:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_SWINT1_MAP), val);
+ break;
+ case GIC_LOCAL_INT_FDC:
+ gic_write(GIC_REG(VPE_OTHER, GIC_VPE_FDC_MAP), val);
+ break;
+ default:
+ pr_err("Invalid local IRQ %d\n", intr);
+ ret = -EINVAL;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&gic_lock, flags);
+
+ return ret;
+}
+
+static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ int intr = GIC_HWIRQ_TO_SHARED(hw);
+ unsigned long flags;
+
+ irq_set_chip_and_handler(virq, &gic_level_irq_controller,
+ handle_level_irq);
+
+ spin_lock_irqsave(&gic_lock, flags);
+ gic_map_to_pin(intr, gic_cpu_pin);
+ /* Map to VPE 0 by default */
+ gic_map_to_vpe(intr, 0);
+ set_bit(intr, pcpu_masks[0].pcpu_mask);
+ spin_unlock_irqrestore(&gic_lock, flags);
+
+ return 0;
+}
+
+static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ if (GIC_HWIRQ_TO_LOCAL(hw) < GIC_NUM_LOCAL_INTRS)
+ return gic_local_irq_domain_map(d, virq, hw);
+ return gic_shared_irq_domain_map(d, virq, hw);
+}
+
+static int gic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_type)
+{
+ if (intsize != 3)
+ return -EINVAL;
+
+ if (intspec[0] == GIC_SHARED)
+ *out_hwirq = GIC_SHARED_TO_HWIRQ(intspec[1]);
+ else if (intspec[0] == GIC_LOCAL)
+ *out_hwirq = GIC_LOCAL_TO_HWIRQ(intspec[1]);
+ else
+ return -EINVAL;
+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static struct irq_domain_ops gic_irq_domain_ops = {
+ .map = gic_irq_domain_map,
+ .xlate = gic_irq_domain_xlate,
+};
+
+static void __init __gic_init(unsigned long gic_base_addr,
+ unsigned long gic_addrspace_size,
+ unsigned int cpu_vec, unsigned int irqbase,
+ struct device_node *node)
+{
+ unsigned int gicconfig;
+
+ gic_base = ioremap_nocache(gic_base_addr, gic_addrspace_size);
+
+ gicconfig = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
+ gic_shared_intrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >>
+ GIC_SH_CONFIG_NUMINTRS_SHF;
+ gic_shared_intrs = ((gic_shared_intrs + 1) * 8);
+
+ gic_vpes = (gicconfig & GIC_SH_CONFIG_NUMVPES_MSK) >>
+ GIC_SH_CONFIG_NUMVPES_SHF;
+ gic_vpes = gic_vpes + 1;
+
+ if (cpu_has_veic) {
+ /* Always use vector 1 in EIC mode */
+ gic_cpu_pin = 0;
+ set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET,
+ __gic_irq_dispatch);
+ } else {
+ gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET;
+ irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec,
+ gic_irq_dispatch);
+ }
+
+ gic_irq_domain = irq_domain_add_simple(node, GIC_NUM_LOCAL_INTRS +
+ gic_shared_intrs, irqbase,
+ &gic_irq_domain_ops, NULL);
+ if (!gic_irq_domain)
+ panic("Failed to add GIC IRQ domain");
+
+ gic_basic_init();
+
+ gic_ipi_init();
+}
+
+void __init gic_init(unsigned long gic_base_addr,
+ unsigned long gic_addrspace_size,
+ unsigned int cpu_vec, unsigned int irqbase)
+{
+ __gic_init(gic_base_addr, gic_addrspace_size, cpu_vec, irqbase, NULL);
+}
+
+static int __init gic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct resource res;
+ unsigned int cpu_vec, i = 0, reserved = 0;
+ phys_addr_t gic_base;
+ size_t gic_len;
+
+ /* Find the first available CPU vector. */
+ while (!of_property_read_u32_index(node, "mti,reserved-cpu-vectors",
+ i++, &cpu_vec))
+ reserved |= BIT(cpu_vec);
+ for (cpu_vec = 2; cpu_vec < 8; cpu_vec++) {
+ if (!(reserved & BIT(cpu_vec)))
+ break;
+ }
+ if (cpu_vec == 8) {
+ pr_err("No CPU vectors available for GIC\n");
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(node, 0, &res)) {
+ /*
+ * Probe the CM for the GIC base address if not specified
+ * in the device-tree.
+ */
+ if (mips_cm_present()) {
+ gic_base = read_gcr_gic_base() &
+ ~CM_GCR_GIC_BASE_GICEN_MSK;
+ gic_len = 0x20000;
+ } else {
+ pr_err("Failed to get GIC memory range\n");
+ return -ENODEV;
+ }
+ } else {
+ gic_base = res.start;
+ gic_len = resource_size(&res);
+ }
+
+ if (mips_cm_present())
+ write_gcr_gic_base(gic_base | CM_GCR_GIC_BASE_GICEN_MSK);
+ gic_present = true;
+
+ __gic_init(gic_base, gic_len, cpu_vec, 0, node);
+
+ return 0;
+}
+IRQCHIP_DECLARE(mips_gic, "mti,gic", gic_of_init);
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 93caf8e68901..2399a3921762 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,12 +1,13 @@
config ATH5K
tristate "Atheros 5xxx wireless cards support"
- depends on PCI && MAC80211
+ depends on (PCI || ATH25) && MAC80211
select ATH_COMMON
select MAC80211_LEDS
select LEDS_CLASS
select NEW_LEDS
select AVERAGE
- select ATH5K_PCI
+ select ATH5K_AHB if ATH25
+ select ATH5K_PCI if !ATH25
---help---
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
@@ -51,9 +52,16 @@ config ATH5K_TRACER
If unsure, say N.
+config ATH5K_AHB
+ bool "Atheros 5xxx AHB bus support"
+ depends on ATH25
+ ---help---
+ This adds support for WiSoC type chipsets of the 5xxx Atheros
+ family.
+
config ATH5K_PCI
bool "Atheros 5xxx PCI bus support"
- depends on PCI
+ depends on (!ATH25 && PCI)
---help---
This adds support for PCI type chipsets of the 5xxx Atheros
family.
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 51e2d8668041..1b3a34f7f224 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -17,5 +17,6 @@ ath5k-y += ani.o
ath5k-y += sysfs.o
ath5k-y += mac80211-ops.o
ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
+ath5k-$(CONFIG_ATH5K_AHB) += ahb.o
ath5k-$(CONFIG_ATH5K_PCI) += pci.o
obj-$(CONFIG_ATH5K) += ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
new file mode 100644
index 000000000000..8f387cf67340
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <ath25_platform.h>
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+
+/* return bus cachesize in 4B word units */
+static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
+{
+ *csz = L1_CACHE_BYTES >> 2;
+}
+
+static bool
+ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
+{
+ struct ath5k_hw *ah = common->priv;
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u16 *eeprom, *eeprom_end;
+
+ eeprom = (u16 *) bcfg->radio;
+ eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
+
+ eeprom += off;
+ if (eeprom > eeprom_end)
+ return false;
+
+ *data = *eeprom;
+ return true;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ ah->ah_mac_srev = bcfg->devid;
+ return 0;
+}
+
+static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u8 *cfg_mac;
+
+ if (to_platform_device(ah->dev)->id == 0)
+ cfg_mac = bcfg->config->wlan0_mac;
+ else
+ cfg_mac = bcfg->config->wlan1_mac;
+
+ memcpy(mac, cfg_mac, ETH_ALEN);
+ return 0;
+}
+
+static const struct ath_bus_ops ath_ahb_bus_ops = {
+ .ath_bus_type = ATH_AHB,
+ .read_cachesize = ath5k_ahb_read_cachesize,
+ .eeprom_read = ath5k_ahb_eeprom_read,
+ .eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
+};
+
+/*Initialization*/
+static int ath_ahb_probe(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ath5k_hw *ah;
+ struct ieee80211_hw *hw;
+ struct resource *res;
+ void __iomem *mem;
+ int irq;
+ int ret = 0;
+ u32 reg;
+
+ if (!dev_get_platdata(&pdev->dev)) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource found\n");
+ ret = -ENXIO;
+ goto err_out;
+ }
+
+ mem = ioremap_nocache(res->start, resource_size(res));
+ if (mem == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no IRQ resource found\n");
+ ret = -ENXIO;
+ goto err_iounmap;
+ }
+
+ irq = res->start;
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ ah = hw->priv;
+ ah->hw = hw;
+ ah->dev = &pdev->dev;
+ ah->iobase = mem;
+ ah->irq = irq;
+ ah->devid = bcfg->devid;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Enable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+
+ /* Enable global WMAC swapping */
+ reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
+ reg |= AR5K_AR2315_BYTESWAP_WMAC;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
+ } else {
+ /* Enable WMAC DMA access (assuming 5312 or 231x*/
+ /* TODO: check other platforms */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg |= AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg |= AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+
+ /*
+ * On a dual-band AR5312, the multiband radio is only
+ * used as pass-through. Disable 2 GHz support in the
+ * driver for it
+ */
+ if (to_platform_device(ah->dev)->id == 0 &&
+ (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
+ (BD_WLAN1 | BD_WLAN0))
+ ah->ah_capabilities.cap_needs_2GHz_ovr = true;
+ else
+ ah->ah_capabilities.cap_needs_2GHz_ovr = false;
+ }
+
+ ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
+ ret = -ENODEV;
+ goto err_free_hw;
+ }
+
+ platform_set_drvdata(pdev, hw);
+
+ return 0;
+
+ err_free_hw:
+ ieee80211_free_hw(hw);
+ err_iounmap:
+ iounmap(mem);
+ err_out:
+ return ret;
+}
+
+static int ath_ahb_remove(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct ath5k_hw *ah;
+ u32 reg;
+
+ if (!hw)
+ return 0;
+
+ ah = hw->priv;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Disable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ } else {
+ /*Stop DMA access */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg &= ~AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg &= ~AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+ }
+
+ ath5k_deinit_ah(ah);
+ iounmap(ah->iobase);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+
+static struct platform_driver ath_ahb_driver = {
+ .probe = ath_ahb_probe,
+ .remove = ath_ahb_remove,
+ .driver = {
+ .name = "ar231x-wmac",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ath_ahb_driver);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ed2468220216..1ed7a88aeea9 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1647,6 +1647,32 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
return &(ath5k_hw_common(ah)->regulatory);
}
+#ifdef CONFIG_ATH5K_AHB
+#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000)
+
+static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
+{
+ /* On AR2315 and AR2317 the PCI clock domain registers
+ * are outside of the WMAC register space */
+ if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
+ (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+ return AR5K_AR2315_PCI_BASE + reg;
+
+ return ah->iobase + reg;
+}
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ath5k_ahb_reg(ah, reg));
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ath5k_ahb_reg(ah, reg));
+}
+
+#else
+
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
return ioread32(ah->iobase + reg);
@@ -1657,6 +1683,8 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
iowrite32(val, ah->iobase + reg);
}
+#endif
+
static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
{
return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index a4a09bb8f2f3..bc9cb356fa69 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,6 +99,15 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
/* Known SREVs */
static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATH5K_AHB
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 },
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 },
+ { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 },
+#else
{ "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
{ "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
{ "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
@@ -117,6 +126,7 @@ static const struct ath5k_srev_name srev_names[] = {
{ "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
{ "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
{ "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+#endif
{ "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
@@ -132,6 +142,10 @@ static const struct ath5k_srev_name srev_names[] = {
{ "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
{ "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATH5K_AHB
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+#endif
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 0beb7e7d6075..ca4b7ccd697f 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -163,14 +163,20 @@ int ath5k_init_leds(struct ath5k_hw *ah)
{
int ret = 0;
struct ieee80211_hw *hw = ah->hw;
+#ifndef CONFIG_ATH5K_AHB
struct pci_dev *pdev = ah->pdev;
+#endif
char name[ATH5K_LED_MAX_NAME_LEN + 1];
const struct pci_device_id *match;
if (!ah->pdev)
return 0;
+#ifdef CONFIG_ATH5K_AHB
+ match = NULL;
+#else
match = pci_match_id(&ath5k_led_devices[0], pdev);
+#endif
if (match) {
__set_bit(ATH_STAT_LEDSOFT, ah->status);
ah->led_pin = ATH_PIN(match->driver_data);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index b0ce7cdee0c2..910e90bf16c6 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -147,7 +147,6 @@ config TCIC
config PCMCIA_ALCHEMY_DEVBOARD
tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
depends on MIPS_ALCHEMY && PCMCIA
- select 64BIT_PHYS_ADDR
help
Enable this driver of you want PCMCIA support on your Alchemy
Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
@@ -158,7 +157,6 @@ config PCMCIA_ALCHEMY_DEVBOARD
config PCMCIA_XXS1500
tristate "MyCable XXS1500 PCMCIA socket support"
depends on PCMCIA && MIPS_XXS1500
- select 64BIT_PHYS_ADDR
help
Support for the PCMCIA/CF socket interface on MyCable XXS1500
systems.
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 09077067b0c8..7b986f9f213f 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -15,6 +15,9 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_nvram.h>
+#endif
#include "ssb_private.h"
@@ -210,6 +213,7 @@ static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
+ struct ssb_sflash *sflash = &mcore->sflash;
struct ssb_pflash *pflash = &mcore->pflash;
/* When there is no chipcommon on the bus there is 4MB flash */
@@ -242,7 +246,15 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
}
ssb_pflash:
- if (pflash->present) {
+ if (sflash->present) {
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(sflash->window, sflash->size);
+#endif
+ } else if (pflash->present) {
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(pflash->window, pflash->window_size);
+#endif
+
ssb_pflash_data.width = pflash->buswidth;
ssb_pflash_resource.start = pflash->window;
ssb_pflash_resource.end = pflash->window + pflash->window_size;
diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c
index 946562389ca8..3be9519654e5 100644
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -83,8 +83,7 @@ static void __init tc_bus_add_devices(struct tc_bus *tbus)
/* Found a board, allocate it an entry in the list */
tdev = kzalloc(sizeof(*tdev), GFP_KERNEL);
if (!tdev) {
- printk(KERN_ERR "tc%x: unable to allocate tc_dev\n",
- slot);
+ pr_err("tc%x: unable to allocate tc_dev\n", slot);
goto out_err;
}
dev_set_name(&tdev->dev, "tc%x", slot);
@@ -117,10 +116,10 @@ static void __init tc_bus_add_devices(struct tc_bus *tbus)
tdev->resource.start = extslotaddr;
tdev->resource.end = extslotaddr + devsize - 1;
} else {
- printk(KERN_ERR "%s: Cannot provide slot space "
- "(%dMiB required, up to %dMiB supported)\n",
- dev_name(&tdev->dev), devsize >> 20,
- max(slotsize, extslotsize) >> 20);
+ pr_err("%s: Cannot provide slot space "
+ "(%ldMiB required, up to %ldMiB supported)\n",
+ dev_name(&tdev->dev), (long)(devsize >> 20),
+ (long)(max(slotsize, extslotsize) >> 20));
kfree(tdev);
goto out_err;
}
@@ -147,14 +146,12 @@ static int __init tc_init(void)
{
/* Initialize the TURBOchannel bus */
if (tc_bus_get_info(&tc_bus))
- return 0;
+ goto out_err;
INIT_LIST_HEAD(&tc_bus.devices);
dev_set_name(&tc_bus.dev, "tc");
- if (device_register(&tc_bus.dev)) {
- put_device(&tc_bus.dev);
- return 0;
- }
+ if (device_register(&tc_bus.dev))
+ goto out_err_device;
if (tc_bus.info.slot_size) {
unsigned int tc_clock = tc_get_speed(&tc_bus) / 100000;
@@ -172,8 +169,8 @@ static int __init tc_init(void)
tc_bus.resource[0].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource,
&tc_bus.resource[0]) < 0) {
- printk(KERN_ERR "tc: Cannot reserve resource\n");
- return 0;
+ pr_err("tc: Cannot reserve resource\n");
+ goto out_err_device;
}
if (tc_bus.ext_slot_size) {
tc_bus.resource[1].start = tc_bus.ext_slot_base;
@@ -184,10 +181,8 @@ static int __init tc_init(void)
tc_bus.resource[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource,
&tc_bus.resource[1]) < 0) {
- printk(KERN_ERR
- "tc: Cannot reserve resource\n");
- release_resource(&tc_bus.resource[0]);
- return 0;
+ pr_err("tc: Cannot reserve resource\n");
+ goto out_err_resource;
}
}
@@ -195,6 +190,13 @@ static int __init tc_init(void)
}
return 0;
+
+out_err_resource:
+ release_resource(&tc_bus.resource[0]);
+out_err_device:
+ put_device(&tc_bus.dev);
+out_err:
+ return 0;
}
subsys_initcall(tc_init);
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 370b24cee4d8..c055d56ec63d 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -30,6 +30,9 @@ config COMPAT_BINFMT_ELF
config ARCH_BINFMT_ELF_RANDOMIZE_PIE
bool
+config ARCH_BINFMT_ELF_STATE
+ bool
+
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 3a6175fe10c0..02b16910f4c9 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -386,6 +386,127 @@ static unsigned long total_mapping_size(struct elf_phdr *cmds, int nr)
ELF_PAGESTART(cmds[first_idx].p_vaddr);
}
+/**
+ * load_elf_phdrs() - load ELF program headers
+ * @elf_ex: ELF header of the binary whose program headers should be loaded
+ * @elf_file: the opened ELF binary file
+ *
+ * Loads ELF program headers from the binary file elf_file, which has the ELF
+ * header pointed to by elf_ex, into a newly allocated array. The caller is
+ * responsible for freeing the allocated data. Returns an ERR_PTR upon failure.
+ */
+static struct elf_phdr *load_elf_phdrs(struct elfhdr *elf_ex,
+ struct file *elf_file)
+{
+ struct elf_phdr *elf_phdata = NULL;
+ int retval, size, err = -1;
+
+ /*
+ * If the size of this structure has changed, then punt, since
+ * we will be doing the wrong thing.
+ */
+ if (elf_ex->e_phentsize != sizeof(struct elf_phdr))
+ goto out;
+
+ /* Sanity check the number of program headers... */
+ if (elf_ex->e_phnum < 1 ||
+ elf_ex->e_phnum > 65536U / sizeof(struct elf_phdr))
+ goto out;
+
+ /* ...and their total size. */
+ size = sizeof(struct elf_phdr) * elf_ex->e_phnum;
+ if (size > ELF_MIN_ALIGN)
+ goto out;
+
+ elf_phdata = kmalloc(size, GFP_KERNEL);
+ if (!elf_phdata)
+ goto out;
+
+ /* Read in the program headers */
+ retval = kernel_read(elf_file, elf_ex->e_phoff,
+ (char *)elf_phdata, size);
+ if (retval != size) {
+ err = (retval < 0) ? retval : -EIO;
+ goto out;
+ }
+
+ /* Success! */
+ err = 0;
+out:
+ if (err) {
+ kfree(elf_phdata);
+ elf_phdata = NULL;
+ }
+ return elf_phdata;
+}
+
+#ifndef CONFIG_ARCH_BINFMT_ELF_STATE
+
+/**
+ * struct arch_elf_state - arch-specific ELF loading state
+ *
+ * This structure is used to preserve architecture specific data during
+ * the loading of an ELF file, throughout the checking of architecture
+ * specific ELF headers & through to the point where the ELF load is
+ * known to be proceeding (ie. SET_PERSONALITY).
+ *
+ * This implementation is a dummy for architectures which require no
+ * specific state.
+ */
+struct arch_elf_state {
+};
+
+#define INIT_ARCH_ELF_STATE {}
+
+/**
+ * arch_elf_pt_proc() - check a PT_LOPROC..PT_HIPROC ELF program header
+ * @ehdr: The main ELF header
+ * @phdr: The program header to check
+ * @elf: The open ELF file
+ * @is_interp: True if the phdr is from the interpreter of the ELF being
+ * loaded, else false.
+ * @state: Architecture-specific state preserved throughout the process
+ * of loading the ELF.
+ *
+ * Inspects the program header phdr to validate its correctness and/or
+ * suitability for the system. Called once per ELF program header in the
+ * range PT_LOPROC to PT_HIPROC, for both the ELF being loaded and its
+ * interpreter.
+ *
+ * Return: Zero to proceed with the ELF load, non-zero to fail the ELF load
+ * with that return code.
+ */
+static inline int arch_elf_pt_proc(struct elfhdr *ehdr,
+ struct elf_phdr *phdr,
+ struct file *elf, bool is_interp,
+ struct arch_elf_state *state)
+{
+ /* Dummy implementation, always proceed */
+ return 0;
+}
+
+/**
+ * arch_check_elf() - check a PT_LOPROC..PT_HIPROC ELF program header
+ * @ehdr: The main ELF header
+ * @has_interp: True if the ELF has an interpreter, else false.
+ * @state: Architecture-specific state preserved throughout the process
+ * of loading the ELF.
+ *
+ * Provides a final opportunity for architecture code to reject the loading
+ * of the ELF & cause an exec syscall to return an error. This is called after
+ * all program headers to be checked by arch_elf_pt_proc have been.
+ *
+ * Return: Zero to proceed with the ELF load, non-zero to fail the ELF load
+ * with that return code.
+ */
+static inline int arch_check_elf(struct elfhdr *ehdr, bool has_interp,
+ struct arch_elf_state *state)
+{
+ /* Dummy implementation, always proceed */
+ return 0;
+}
+
+#endif /* !CONFIG_ARCH_BINFMT_ELF_STATE */
/* This is much more generalized than the library routine read function,
so we keep this separate. Technically the library read function
@@ -394,16 +515,15 @@ static unsigned long total_mapping_size(struct elf_phdr *cmds, int nr)
static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
struct file *interpreter, unsigned long *interp_map_addr,
- unsigned long no_base)
+ unsigned long no_base, struct elf_phdr *interp_elf_phdata)
{
- struct elf_phdr *elf_phdata;
struct elf_phdr *eppnt;
unsigned long load_addr = 0;
int load_addr_set = 0;
unsigned long last_bss = 0, elf_bss = 0;
unsigned long error = ~0UL;
unsigned long total_size;
- int retval, i, size;
+ int i;
/* First of all, some simple consistency checks */
if (interp_elf_ex->e_type != ET_EXEC &&
@@ -414,40 +534,14 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
if (!interpreter->f_op->mmap)
goto out;
- /*
- * If the size of this structure has changed, then punt, since
- * we will be doing the wrong thing.
- */
- if (interp_elf_ex->e_phentsize != sizeof(struct elf_phdr))
- goto out;
- if (interp_elf_ex->e_phnum < 1 ||
- interp_elf_ex->e_phnum > 65536U / sizeof(struct elf_phdr))
- goto out;
-
- /* Now read in all of the header information */
- size = sizeof(struct elf_phdr) * interp_elf_ex->e_phnum;
- if (size > ELF_MIN_ALIGN)
- goto out;
- elf_phdata = kmalloc(size, GFP_KERNEL);
- if (!elf_phdata)
- goto out;
-
- retval = kernel_read(interpreter, interp_elf_ex->e_phoff,
- (char *)elf_phdata, size);
- error = -EIO;
- if (retval != size) {
- if (retval < 0)
- error = retval;
- goto out_close;
- }
-
- total_size = total_mapping_size(elf_phdata, interp_elf_ex->e_phnum);
+ total_size = total_mapping_size(interp_elf_phdata,
+ interp_elf_ex->e_phnum);
if (!total_size) {
error = -EINVAL;
- goto out_close;
+ goto out;
}
- eppnt = elf_phdata;
+ eppnt = interp_elf_phdata;
for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
if (eppnt->p_type == PT_LOAD) {
int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
@@ -474,7 +568,7 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
*interp_map_addr = map_addr;
error = map_addr;
if (BAD_ADDR(map_addr))
- goto out_close;
+ goto out;
if (!load_addr_set &&
interp_elf_ex->e_type == ET_DYN) {
@@ -493,7 +587,7 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
eppnt->p_memsz > TASK_SIZE ||
TASK_SIZE - eppnt->p_memsz < k) {
error = -ENOMEM;
- goto out_close;
+ goto out;
}
/*
@@ -523,7 +617,7 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
*/
if (padzero(elf_bss)) {
error = -EFAULT;
- goto out_close;
+ goto out;
}
/* What we have mapped so far */
@@ -532,13 +626,10 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex,
/* Map the last of the bss segment */
error = vm_brk(elf_bss, last_bss - elf_bss);
if (BAD_ADDR(error))
- goto out_close;
+ goto out;
}
error = load_addr;
-
-out_close:
- kfree(elf_phdata);
out:
return error;
}
@@ -575,10 +666,9 @@ static int load_elf_binary(struct linux_binprm *bprm)
int load_addr_set = 0;
char * elf_interpreter = NULL;
unsigned long error;
- struct elf_phdr *elf_ppnt, *elf_phdata;
+ struct elf_phdr *elf_ppnt, *elf_phdata, *interp_elf_phdata = NULL;
unsigned long elf_bss, elf_brk;
int retval, i;
- unsigned int size;
unsigned long elf_entry;
unsigned long interp_load_addr = 0;
unsigned long start_code, end_code, start_data, end_data;
@@ -589,6 +679,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
struct elfhdr elf_ex;
struct elfhdr interp_elf_ex;
} *loc;
+ struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE;
loc = kmalloc(sizeof(*loc), GFP_KERNEL);
if (!loc) {
@@ -611,26 +702,10 @@ static int load_elf_binary(struct linux_binprm *bprm)
if (!bprm->file->f_op->mmap)
goto out;
- /* Now read in all of the header information */
- if (loc->elf_ex.e_phentsize != sizeof(struct elf_phdr))
- goto out;
- if (loc->elf_ex.e_phnum < 1 ||
- loc->elf_ex.e_phnum > 65536U / sizeof(struct elf_phdr))
- goto out;
- size = loc->elf_ex.e_phnum * sizeof(struct elf_phdr);
- retval = -ENOMEM;
- elf_phdata = kmalloc(size, GFP_KERNEL);
+ elf_phdata = load_elf_phdrs(&loc->elf_ex, bprm->file);
if (!elf_phdata)
goto out;
- retval = kernel_read(bprm->file, loc->elf_ex.e_phoff,
- (char *)elf_phdata, size);
- if (retval != size) {
- if (retval >= 0)
- retval = -EIO;
- goto out_free_ph;
- }
-
elf_ppnt = elf_phdata;
elf_bss = 0;
elf_brk = 0;
@@ -699,12 +774,21 @@ static int load_elf_binary(struct linux_binprm *bprm)
elf_ppnt = elf_phdata;
for (i = 0; i < loc->elf_ex.e_phnum; i++, elf_ppnt++)
- if (elf_ppnt->p_type == PT_GNU_STACK) {
+ switch (elf_ppnt->p_type) {
+ case PT_GNU_STACK:
if (elf_ppnt->p_flags & PF_X)
executable_stack = EXSTACK_ENABLE_X;
else
executable_stack = EXSTACK_DISABLE_X;
break;
+
+ case PT_LOPROC ... PT_HIPROC:
+ retval = arch_elf_pt_proc(&loc->elf_ex, elf_ppnt,
+ bprm->file, false,
+ &arch_state);
+ if (retval)
+ goto out_free_dentry;
+ break;
}
/* Some simple consistency checks for the interpreter */
@@ -716,8 +800,36 @@ static int load_elf_binary(struct linux_binprm *bprm)
/* Verify the interpreter has a valid arch */
if (!elf_check_arch(&loc->interp_elf_ex))
goto out_free_dentry;
+
+ /* Load the interpreter program headers */
+ interp_elf_phdata = load_elf_phdrs(&loc->interp_elf_ex,
+ interpreter);
+ if (!interp_elf_phdata)
+ goto out_free_dentry;
+
+ /* Pass PT_LOPROC..PT_HIPROC headers to arch code */
+ elf_ppnt = interp_elf_phdata;
+ for (i = 0; i < loc->interp_elf_ex.e_phnum; i++, elf_ppnt++)
+ switch (elf_ppnt->p_type) {
+ case PT_LOPROC ... PT_HIPROC:
+ retval = arch_elf_pt_proc(&loc->interp_elf_ex,
+ elf_ppnt, interpreter,
+ true, &arch_state);
+ if (retval)
+ goto out_free_dentry;
+ break;
+ }
}
+ /*
+ * Allow arch code to reject the ELF at this point, whilst it's
+ * still possible to return an error to the code that invoked
+ * the exec syscall.
+ */
+ retval = arch_check_elf(&loc->elf_ex, !!interpreter, &arch_state);
+ if (retval)
+ goto out_free_dentry;
+
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
@@ -725,7 +837,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
/* Do this immediately, since STACK_TOP as used in setup_arg_pages
may depend on the personality. */
- SET_PERSONALITY(loc->elf_ex);
+ SET_PERSONALITY2(loc->elf_ex, &arch_state);
if (elf_read_implies_exec(loc->elf_ex, executable_stack))
current->personality |= READ_IMPLIES_EXEC;
@@ -890,7 +1002,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
elf_entry = load_elf_interp(&loc->interp_elf_ex,
interpreter,
&interp_map_addr,
- load_bias);
+ load_bias, interp_elf_phdata);
if (!IS_ERR((void *)elf_entry)) {
/*
* load_elf_interp() returns relocation
@@ -917,6 +1029,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
}
}
+ kfree(interp_elf_phdata);
kfree(elf_phdata);
set_binfmt(&elf_format);
@@ -981,6 +1094,7 @@ out_ret:
/* error cleanup */
out_free_dentry:
+ kfree(interp_elf_phdata);
allow_write_access(interpreter);
if (interpreter)
fput(interpreter);
diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 000000000000..cf35a577e371
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 67a5fa7830c4..20fa8d8ae313 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -15,6 +15,11 @@
set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
#endif
+#ifndef SET_PERSONALITY2
+#define SET_PERSONALITY2(ex, state) \
+ SET_PERSONALITY(ex)
+#endif
+
#if ELF_CLASS == ELFCLASS32
extern Elf32_Dyn _DYNAMIC [];
diff --git a/arch/mips/include/asm/gic.h b/include/linux/irqchip/mips-gic.h
index d7699cf7e135..420f77b34d02 100644
--- a/arch/mips/include/asm/gic.h
+++ b/include/linux/irqchip/mips-gic.h
@@ -4,57 +4,26 @@
* for more details.
*
* Copyright (C) 2000, 07 MIPS Technologies, Inc.
- *
- * GIC Register Definitions
- *
*/
-#ifndef _ASM_GICREGS_H
-#define _ASM_GICREGS_H
-
-#include <linux/bitmap.h>
-#include <linux/threads.h>
+#ifndef __LINUX_IRQCHIP_MIPS_GIC_H
+#define __LINUX_IRQCHIP_MIPS_GIC_H
-#include <irq.h>
+#include <linux/clocksource.h>
-#undef GICISBYTELITTLEENDIAN
+#define GIC_MAX_INTRS 256
/* Constants */
#define GIC_POL_POS 1
#define GIC_POL_NEG 0
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#define GIC_TRIG_DUAL_ENABLE 1
+#define GIC_TRIG_DUAL_DISABLE 0
#define MSK(n) ((1 << (n)) - 1)
-#define REG32(addr) (*(volatile unsigned int *) (addr))
-#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
-#define REGP(base, phys) REG32((unsigned long)(base) + (phys))
/* Accessors */
-#define GIC_REG(segment, offset) \
- REG32(_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
-#define GIC_REG_ADDR(segment, offset) \
- REG32(_gic_base + segment##_##SECTION_OFS + offset)
-
-#define GIC_ABS_REG(segment, offset) \
- (_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
-#define GIC_REG_ABS_ADDR(segment, offset) \
- (_gic_base + segment##_##SECTION_OFS + offset)
-
-#ifdef GICISBYTELITTLEENDIAN
-#define GICREAD(reg, data) ((data) = (reg), (data) = le32_to_cpu(data))
-#define GICWRITE(reg, data) ((reg) = cpu_to_le32(data))
-#else
-#define GICREAD(reg, data) ((data) = (reg))
-#define GICWRITE(reg, data) ((reg) = (data))
-#endif
-#define GICBIS(reg, mask, bits) \
- do { u32 data; \
- GICREAD(reg, data); \
- data &= ~(mask); \
- data |= ((bits) & (mask)); \
- GICWRITE((reg), data); \
- } while (0)
-
+#define GIC_REG(segment, offset) (segment##_##SECTION_OFS + offset##_##OFS)
/* GIC Address Space */
#define SHARED_SECTION_OFS 0x0000
@@ -75,120 +44,42 @@
#define GIC_SH_COUNTER_63_32_OFS 0x0014
#define GIC_SH_REVISIONID_OFS 0x0020
-/* Interrupt Polarity */
-#define GIC_SH_POL_31_0_OFS 0x0100
-#define GIC_SH_POL_63_32_OFS 0x0104
-#define GIC_SH_POL_95_64_OFS 0x0108
-#define GIC_SH_POL_127_96_OFS 0x010c
-#define GIC_SH_POL_159_128_OFS 0x0110
-#define GIC_SH_POL_191_160_OFS 0x0114
-#define GIC_SH_POL_223_192_OFS 0x0118
-#define GIC_SH_POL_255_224_OFS 0x011c
-
-/* Edge/Level Triggering */
-#define GIC_SH_TRIG_31_0_OFS 0x0180
-#define GIC_SH_TRIG_63_32_OFS 0x0184
-#define GIC_SH_TRIG_95_64_OFS 0x0188
-#define GIC_SH_TRIG_127_96_OFS 0x018c
-#define GIC_SH_TRIG_159_128_OFS 0x0190
-#define GIC_SH_TRIG_191_160_OFS 0x0194
-#define GIC_SH_TRIG_223_192_OFS 0x0198
-#define GIC_SH_TRIG_255_224_OFS 0x019c
-
-/* Dual Edge Triggering */
-#define GIC_SH_DUAL_31_0_OFS 0x0200
-#define GIC_SH_DUAL_63_32_OFS 0x0204
-#define GIC_SH_DUAL_95_64_OFS 0x0208
-#define GIC_SH_DUAL_127_96_OFS 0x020c
-#define GIC_SH_DUAL_159_128_OFS 0x0210
-#define GIC_SH_DUAL_191_160_OFS 0x0214
-#define GIC_SH_DUAL_223_192_OFS 0x0218
-#define GIC_SH_DUAL_255_224_OFS 0x021c
+/* Convert an interrupt number to a byte offset/bit for multi-word registers */
+#define GIC_INTR_OFS(intr) (((intr) / 32) * 4)
+#define GIC_INTR_BIT(intr) ((intr) % 32)
+
+/* Polarity : Reset Value is always 0 */
+#define GIC_SH_SET_POLARITY_OFS 0x0100
+
+/* Triggering : Reset Value is always 0 */
+#define GIC_SH_SET_TRIGGER_OFS 0x0180
+
+/* Dual edge triggering : Reset Value is always 0 */
+#define GIC_SH_SET_DUAL_OFS 0x0200
/* Set/Clear corresponding bit in Edge Detect Register */
#define GIC_SH_WEDGE_OFS 0x0280
-/* Reset Mask - Disables Interrupt */
-#define GIC_SH_RMASK_31_0_OFS 0x0300
-#define GIC_SH_RMASK_63_32_OFS 0x0304
-#define GIC_SH_RMASK_95_64_OFS 0x0308
-#define GIC_SH_RMASK_127_96_OFS 0x030c
-#define GIC_SH_RMASK_159_128_OFS 0x0310
-#define GIC_SH_RMASK_191_160_OFS 0x0314
-#define GIC_SH_RMASK_223_192_OFS 0x0318
-#define GIC_SH_RMASK_255_224_OFS 0x031c
-
-/* Set Mask (WO) - Enables Interrupt */
-#define GIC_SH_SMASK_31_0_OFS 0x0380
-#define GIC_SH_SMASK_63_32_OFS 0x0384
-#define GIC_SH_SMASK_95_64_OFS 0x0388
-#define GIC_SH_SMASK_127_96_OFS 0x038c
-#define GIC_SH_SMASK_159_128_OFS 0x0390
-#define GIC_SH_SMASK_191_160_OFS 0x0394
-#define GIC_SH_SMASK_223_192_OFS 0x0398
-#define GIC_SH_SMASK_255_224_OFS 0x039c
+/* Mask manipulation */
+#define GIC_SH_RMASK_OFS 0x0300
+#define GIC_SH_SMASK_OFS 0x0380
/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
-#define GIC_SH_MASK_31_0_OFS 0x0400
-#define GIC_SH_MASK_63_32_OFS 0x0404
-#define GIC_SH_MASK_95_64_OFS 0x0408
-#define GIC_SH_MASK_127_96_OFS 0x040c
-#define GIC_SH_MASK_159_128_OFS 0x0410
-#define GIC_SH_MASK_191_160_OFS 0x0414
-#define GIC_SH_MASK_223_192_OFS 0x0418
-#define GIC_SH_MASK_255_224_OFS 0x041c
+#define GIC_SH_MASK_OFS 0x0400
/* Pending Global Interrupts (RO) */
-#define GIC_SH_PEND_31_0_OFS 0x0480
-#define GIC_SH_PEND_63_32_OFS 0x0484
-#define GIC_SH_PEND_95_64_OFS 0x0488
-#define GIC_SH_PEND_127_96_OFS 0x048c
-#define GIC_SH_PEND_159_128_OFS 0x0490
-#define GIC_SH_PEND_191_160_OFS 0x0494
-#define GIC_SH_PEND_223_192_OFS 0x0498
-#define GIC_SH_PEND_255_224_OFS 0x049c
-
-#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
+#define GIC_SH_PEND_OFS 0x0480
/* Maps Interrupt X to a Pin */
-#define GIC_SH_MAP_TO_PIN(intr) \
- (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
-
-#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
+#define GIC_SH_MAP_TO_PIN(intr) (4 * (intr))
/* Maps Interrupt X to a VPE */
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
- (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4))
+ ((32 * (intr)) + (((vpe) / 32) * 4))
#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
-/* Convert an interrupt number to a byte offset/bit for multi-word registers */
-#define GIC_INTR_OFS(intr) (((intr) / 32)*4)
-#define GIC_INTR_BIT(intr) ((intr) % 32)
-
-/* Polarity : Reset Value is always 0 */
-#define GIC_SH_SET_POLARITY_OFS 0x0100
-#define GIC_SET_POLARITY(intr, pol) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + \
- GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
- (pol) << GIC_INTR_BIT(intr))
-
-/* Triggering : Reset Value is always 0 */
-#define GIC_SH_SET_TRIGGER_OFS 0x0180
-#define GIC_SET_TRIGGER(intr, trig) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + \
- GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
- (trig) << GIC_INTR_BIT(intr))
-
-/* Mask manipulation */
-#define GIC_SH_SMASK_OFS 0x0380
-#define GIC_SET_INTR_MASK(intr) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + \
- GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr))
-#define GIC_SH_RMASK_OFS 0x0300
-#define GIC_CLR_INTR_MASK(intr) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + \
- GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr))
-
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
#define GIC_VPE_PEND_OFS 0x0004
@@ -198,6 +89,7 @@
#define GIC_VPE_WD_MAP_OFS 0x0040
#define GIC_VPE_COMPARE_MAP_OFS 0x0044
#define GIC_VPE_TIMER_MAP_OFS 0x0048
+#define GIC_VPE_FDC_MAP_OFS 0x004c
#define GIC_VPE_PERFCTR_MAP_OFS 0x0050
#define GIC_VPE_SWINT0_MAP_OFS 0x0054
#define GIC_VPE_SWINT1_MAP_OFS 0x0058
@@ -208,13 +100,11 @@
#define GIC_VPE_COMPARE_LO_OFS 0x00a0
#define GIC_VPE_COMPARE_HI_OFS 0x00a4
-#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
-#define GIC_VPE_EIC_SS(intr) \
- (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
+#define GIC_VPE_EIC_SHADOW_SET_BASE_OFS 0x0100
+#define GIC_VPE_EIC_SS(intr) (4 * (intr))
-#define GIC_VPE_EIC_VEC_BASE 0x0800
-#define GIC_VPE_EIC_VEC(intr) \
- (GIC_VPE_EIC_VEC_BASE + (4 * intr))
+#define GIC_VPE_EIC_VEC_BASE_OFS 0x0800
+#define GIC_VPE_EIC_VEC(intr) (4 * (intr))
#define GIC_VPE_TENABLE_NMI_OFS 0x1000
#define GIC_VPE_TENABLE_YQ_OFS 0x1004
@@ -238,8 +128,8 @@
#define GIC_SH_CONFIG_NUMVPES_SHF 0
#define GIC_SH_CONFIG_NUMVPES_MSK (MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
-#define GIC_SH_WEDGE_SET(intr) (intr | (0x1 << 31))
-#define GIC_SH_WEDGE_CLR(intr) (intr & ~(0x1 << 31))
+#define GIC_SH_WEDGE_SET(intr) ((intr) | (0x1 << 31))
+#define GIC_SH_WEDGE_CLR(intr) ((intr) & ~(0x1 << 31))
#define GIC_MAP_TO_PIN_SHF 31
#define GIC_MAP_TO_PIN_MSK (MSK(1) << GIC_MAP_TO_PIN_SHF)
@@ -251,6 +141,10 @@
#define GIC_MAP_MSK (MSK(6) << GIC_MAP_SHF)
/* GIC_VPE_CTL Masks */
+#define GIC_VPE_CTL_FDC_RTBL_SHF 4
+#define GIC_VPE_CTL_FDC_RTBL_MSK (MSK(1) << GIC_VPE_CTL_FDC_RTBL_SHF)
+#define GIC_VPE_CTL_SWINT_RTBL_SHF 3
+#define GIC_VPE_CTL_SWINT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_SWINT_RTBL_SHF)
#define GIC_VPE_CTL_PERFCNT_RTBL_SHF 2
#define GIC_VPE_CTL_PERFCNT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
#define GIC_VPE_CTL_TIMER_RTBL_SHF 1
@@ -300,38 +194,6 @@
#define GIC_VPE_SMASK_SWINT1_SHF 5
#define GIC_VPE_SMASK_SWINT1_MSK (MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
-/*
- * Set the Mapping of Interrupt X to a VPE.
- */
-#define GIC_SH_MAP_TO_VPE_SMASK(intr, vpe) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
- GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
-
-/*
- * Interrupt Meta-data specification. The ipiflag helps
- * in building ipi_map.
- */
-struct gic_intr_map {
- unsigned int cpunum; /* Directed to this CPU */
-#define GIC_UNUSED 0xdead /* Dummy data */
- unsigned int pin; /* Directed to this Pin */
- unsigned int polarity; /* Polarity : +/- */
- unsigned int trigtype; /* Trigger : Edge/Levl */
- unsigned int flags; /* Misc flags */
-#define GIC_FLAG_TRANSPARENT 0x01
-};
-
-/*
- * This is only used in EIC mode. This helps to figure out which
- * shared interrupts we need to process when we get a vector interrupt.
- */
-#define GIC_MAX_SHARED_INTR 0x5
-struct gic_shared_intr_map {
- unsigned int num_shared_intr;
- unsigned int intr_list[GIC_MAX_SHARED_INTR];
- unsigned int local_intr_mask;
-};
-
/* GIC nomenclature for Core Interrupt Pins. */
#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
#define GIC_CPU_INT1 1 /* . */
@@ -340,45 +202,48 @@ struct gic_shared_intr_map {
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 7 */
-/* Local GIC interrupts. */
-#define GIC_INT_TMR (GIC_CPU_INT5)
-#define GIC_INT_PERFCTR (GIC_CPU_INT5)
+/* Add 2 to convert GIC CPU pin to core interrupt */
+#define GIC_CPU_PIN_OFFSET 2
/* Add 2 to convert non-EIC hardware interrupt to EIC vector number. */
-#define GIC_CPU_TO_VEC_OFFSET (2)
+#define GIC_CPU_TO_VEC_OFFSET 2
/* Mapped interrupt to pin X, then GIC will generate the vector (X+1). */
-#define GIC_PIN_TO_VEC_OFFSET (1)
+#define GIC_PIN_TO_VEC_OFFSET 1
-#include <linux/clocksource.h>
-#include <linux/irq.h>
+/* Local GIC interrupts. */
+#define GIC_LOCAL_INT_WD 0 /* GIC watchdog */
+#define GIC_LOCAL_INT_COMPARE 1 /* GIC count and compare timer */
+#define GIC_LOCAL_INT_TIMER 2 /* CPU timer interrupt */
+#define GIC_LOCAL_INT_PERFCTR 3 /* CPU performance counter */
+#define GIC_LOCAL_INT_SWINT0 4 /* CPU software interrupt 0 */
+#define GIC_LOCAL_INT_SWINT1 5 /* CPU software interrupt 1 */
+#define GIC_LOCAL_INT_FDC 6 /* CPU fast debug channel */
+#define GIC_NUM_LOCAL_INTRS 7
+
+/* Convert between local/shared IRQ number and GIC HW IRQ number. */
+#define GIC_LOCAL_HWIRQ_BASE 0
+#define GIC_LOCAL_TO_HWIRQ(x) (GIC_LOCAL_HWIRQ_BASE + (x))
+#define GIC_HWIRQ_TO_LOCAL(x) ((x) - GIC_LOCAL_HWIRQ_BASE)
+#define GIC_SHARED_HWIRQ_BASE GIC_NUM_LOCAL_INTRS
+#define GIC_SHARED_TO_HWIRQ(x) (GIC_SHARED_HWIRQ_BASE + (x))
+#define GIC_HWIRQ_TO_SHARED(x) ((x) - GIC_SHARED_HWIRQ_BASE)
extern unsigned int gic_present;
-extern unsigned int gic_frequency;
-extern unsigned long _gic_base;
-extern unsigned int gic_irq_base;
-extern unsigned int gic_irq_flags[];
-extern struct gic_shared_intr_map gic_shared_intr_map[];
extern void gic_init(unsigned long gic_base_addr,
- unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
- unsigned int intrmap_size, unsigned int irqbase);
+ unsigned long gic_addrspace_size, unsigned int cpu_vec,
+ unsigned int irqbase);
extern void gic_clocksource_init(unsigned int);
-extern unsigned int gic_compare_int (void);
extern cycle_t gic_read_count(void);
+extern unsigned int gic_get_count_width(void);
extern cycle_t gic_read_compare(void);
extern void gic_write_compare(cycle_t cnt);
extern void gic_write_cpu_compare(cycle_t cnt, int cpu);
extern void gic_send_ipi(unsigned int intr);
extern unsigned int plat_ipi_call_int_xlate(unsigned int);
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
-extern void gic_bind_eic_interrupt(int irq, int set);
extern unsigned int gic_get_timer_pending(void);
-extern void gic_get_int_mask(unsigned long *dst, const unsigned long *src);
-extern unsigned int gic_get_int(void);
-extern void gic_enable_interrupt(int irq_vec);
-extern void gic_disable_interrupt(int irq_vec);
-extern void gic_irq_ack(struct irq_data *d);
-extern void gic_finish_irq(struct irq_data *d);
-extern void gic_platform_init(int irqs, struct irq_chip *irq_controller);
-#endif /* _ASM_GICREGS_H */
+extern int gic_get_c0_compare_int(void);
+extern int gic_get_c0_perfcount_int(void);
+#endif /* __LINUX_IRQCHIP_MIPS_GIC_H */