diff options
57 files changed, 949 insertions, 476 deletions
diff --git a/Documentation/admin-guide/serial-console.rst b/Documentation/admin-guide/serial-console.rst index 58b32832e50a..8c8b94e54e26 100644 --- a/Documentation/admin-guide/serial-console.rst +++ b/Documentation/admin-guide/serial-console.rst @@ -33,8 +33,11 @@ The format of this option is:: 9600n8. The maximum baudrate is 115200. You can specify multiple console= options on the kernel command line. -Output will appear on all of them. The last device will be used when -you open ``/dev/console``. So, for example:: + +The behavior is well defined when each device type is mentioned only once. +In this case, the output will appear on all requested consoles. And +the last device will be used when you open ``/dev/console``. +So, for example:: console=ttyS1,9600 console=tty0 @@ -42,7 +45,34 @@ defines that opening ``/dev/console`` will get you the current foreground virtual console, and kernel messages will appear on both the VGA console and the 2nd serial port (ttyS1 or COM2) at 9600 baud. -Note that you can only define one console per device type (serial, video). +The behavior is more complicated when the same device type is defined more +times. In this case, there are the following two rules: + +1. The output will appear only on the first device of each defined type. + +2. ``/dev/console`` will be associated with the first registered device. + Where the registration order depends on how kernel initializes various + subsystems. + + This rule is used also when the last console= parameter is not used + for other reasons. For example, because of a typo or because + the hardware is not available. + +The result might be surprising. For example, the following two command +lines have the same result: + + console=ttyS1,9600 console=tty0 console=tty1 + console=tty0 console=ttyS1,9600 console=tty1 + +The kernel messages are printed only on ``tty0`` and ``ttyS1``. And +``/dev/console`` gets associated with ``tty0``. It is because kernel +tries to register graphical consoles before serial ones. It does it +because of the default behavior when no console device is specified, +see below. + +Note that the last ``console=tty1`` parameter still makes a difference. +The kernel command line is used also by systemd. It would use the last +defined ``tty1`` as the login console. If no console device is specified, the first device found capable of acting as a system console will be used. At this time, the system diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 3cbdde85ed71..01ec45b3b406 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson SoC UART Serial Interface @@ -34,6 +34,11 @@ properties: - amlogic,meson-gx-uart - amlogic,meson-s4-uart - const: amlogic,meson-ao-uart + - description: Always-on power domain UART controller on G12A SoCs + items: + - const: amlogic,meson-g12a-uart + - const: amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart - description: Everything-Else power domain UART controller enum: - amlogic,meson6-uart @@ -41,6 +46,10 @@ properties: - amlogic,meson8b-uart - amlogic,meson-gx-uart - amlogic,meson-s4-uart + - description: Everything-Else power domain UART controller on G12A SoCs + items: + - const: amlogic,meson-g12a-uart + - const: amlogic,meson-gx-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 4cbe76e1715b..40414247d61a 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -49,6 +49,24 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + interrupts: maxItems: 1 @@ -86,12 +104,16 @@ properties: required: - compatible - reg + - clocks + - clock-names - interrupts unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/imx5-clock.h> + aliases { serial0 = &uart1; }; @@ -100,6 +122,11 @@ examples: compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; + clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, + <&clks IMX5_CLK_UART1_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; uart-has-rtscts; fsl,dte-mode; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index ab81722293d3..93062403276b 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -65,6 +65,9 @@ properties: - const: rx - const: tx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml index 05a6999808d1..dd33794b3534 100644 --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Geni based QUP UART interface diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml index 12d0fa34f9f9..3fc2601f1338 100644 --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,em-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas EMMA Mobile UART Interface diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index afedb6edfc34..1c7f1276aed6 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,hscif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF) diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml index dc445b327e0b..9f7305200c47 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,sci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communication Interface diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 54e4f41be9b4..99030fc18c45 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communication Interface with FIFO (SCIF) diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml index 4c3b5e7270da..499507678cdf 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scifa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communications Interface with FIFO A (SCIFA) diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml index 2f7cbbb48960..810d8a991fdd 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scifb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communications Interface with FIFO B (SCIFB) diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index c9231e501f1f..ea277560a596 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/serial.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Serial Interface Generic diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 2becdfab4f15..3862411c77b5 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -68,12 +68,12 @@ properties: - const: apb_pclk dmas: - minItems: 2 + maxItems: 2 dma-names: items: - - const: rx - const: tx + - const: rx snps,uart-16550-compatible: description: reflects the value of UART_16550_COMPATIBLE configuration diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index da0e2745b5fc..28ff77aa86c8 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Unisoc Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/sprd-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/sprd-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Spreadtrum serial UART diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml index ea1e637661c7..7d0a4bcb88e9 100644 --- a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml @@ -2,8 +2,8 @@ # Copyright (C) Sunplus Co., Ltd. 2021 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Sunplus SoC SP7021 UART Controller diff --git a/Documentation/driver-api/tty/n_gsm.rst b/Documentation/driver-api/tty/n_gsm.rst index 9447b8a3b8e2..120317ec990f 100644 --- a/Documentation/driver-api/tty/n_gsm.rst +++ b/Documentation/driver-api/tty/n_gsm.rst @@ -29,6 +29,8 @@ Config Initiator #. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. +#. Configure DLCs using ``GSMIOC_GETCONF_DLCI``/``GSMIOC_SETCONF_DLCI`` ioctl for non-defaults. + #. Obtain base gsmtty number for the used serial port. Major parts of the initialization program @@ -45,6 +47,7 @@ Config Initiator int ldisc = N_GSM0710; struct gsm_config c; struct gsm_config_ext ce; + struct gsm_dlci_config dc; struct termios configuration; uint32_t first; @@ -81,6 +84,13 @@ Config Initiator c.mtu = 127; /* set the new configuration */ ioctl(fd, GSMIOC_SETCONF, &c); + /* get DLC 1 configuration */ + dc.channel = 1; + ioctl(fd, GSMIOC_GETCONF_DLCI, &dc); + /* the first user channel gets a higher priority */ + dc.priority = 1; + /* set the new DLC 1 specific configuration */ + ioctl(fd, GSMIOC_SETCONF_DLCI, &dc); /* get first gsmtty device node */ ioctl(fd, GSMIOC_GETFIRST, &first); printf("first muxed line: /dev/gsmtty%i\n", first); @@ -120,6 +130,8 @@ Config Requester #. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. +#. Configure DLCs using ``GSMIOC_GETCONF_DLCI``/``GSMIOC_SETCONF_DLCI`` ioctl for non-defaults. + #. Obtain base gsmtty number for the used serial port:: #include <stdio.h> @@ -132,6 +144,7 @@ Config Requester int ldisc = N_GSM0710; struct gsm_config c; struct gsm_config_ext ce; + struct gsm_dlci_config dc; struct termios configuration; uint32_t first; @@ -161,6 +174,13 @@ Config Requester c.mtu = 127; /* set the new configuration */ ioctl(fd, GSMIOC_SETCONF, &c); + /* get DLC 1 configuration */ + dc.channel = 1; + ioctl(fd, GSMIOC_GETCONF_DLCI, &dc); + /* the first user channel gets a higher priority */ + dc.priority = 1; + /* set the new DLC 1 specific configuration */ + ioctl(fd, GSMIOC_SETCONF_DLCI, &dc); /* get first gsmtty device node */ ioctl(fd, GSMIOC_GETFIRST, &first); printf("first muxed line: /dev/gsmtty%i\n", first); diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index feb27a0ccfb4..0c49655cc90c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2045,7 +2045,8 @@ }; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; @@ -2055,7 +2056,8 @@ }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; @@ -2292,7 +2294,8 @@ }; uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x22000 0x0 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; @@ -2301,7 +2304,8 @@ }; uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; @@ -2310,7 +2314,8 @@ }; uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 6ddfeb2fe98f..97c5bfb9d58a 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -1060,7 +1060,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx start..."); - tty->hw_stopped = 0; + tty->hw_stopped = false; tx_start(info, tty); info->pending_bh |= BH_TRANSMIT; return; @@ -1069,7 +1069,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) if (!(info->serial_signals & SerialSignal_CTS)) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx stop..."); - tty->hw_stopped = 1; + tty->hw_stopped = true; tx_stop(info); } } @@ -2312,7 +2312,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; tx_release(tty); } } diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c index 50536fe59f1a..aa659758563f 100644 --- a/drivers/mmc/core/sdio_uart.c +++ b/drivers/mmc/core/sdio_uart.c @@ -478,13 +478,13 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) int cts = (status & UART_MSR_CTS); if (tty->hw_stopped) { if (cts) { - tty->hw_stopped = 0; + tty->hw_stopped = false; sdio_uart_start_tx(port); tty_wakeup(tty); } } else { if (!cts) { - tty->hw_stopped = 1; + tty->hw_stopped = true; sdio_uart_stop_tx(port); } } @@ -633,7 +633,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) if (C_CRTSCTS(tty)) if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) - tty->hw_stopped = 1; + tty->hw_stopped = true; clear_bit(TTY_IO_ERROR, &tty->flags); @@ -882,14 +882,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty, /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; sdio_uart_start_tx(port); } /* Handle turning on CRTSCTS */ if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) { - tty->hw_stopped = 1; + tty->hw_stopped = true; sdio_uart_stop_tx(port); } } diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index d35fc068da74..84caac32f0fd 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -160,7 +160,7 @@ config LEGACY_TIOCSTI a dangerous legacy operation, and can be disabled on most systems. - Say 'Y here only if you have confirmed that your system's + Say Y here only if you have confirmed that your system's userspace depends on this functionality to continue operating normally. diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index d7515d61659e..c06ad0a0744b 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -347,7 +347,7 @@ static void check_modem_status(struct serial_state *info) #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) printk("CTS tx start..."); #endif - port->tty->hw_stopped = 0; + port->tty->hw_stopped = false; info->IER |= UART_IER_THRI; amiga_custom.intena = IF_SETCLR | IF_TBE; mb(); @@ -362,7 +362,7 @@ static void check_modem_status(struct serial_state *info) #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) printk("CTS tx stop..."); #endif - port->tty->hw_stopped = 1; + port->tty->hw_stopped = true; info->IER &= ~UART_IER_THRI; /* disable Tx interrupt and remove any pending interrupts */ amiga_custom.intena = IF_TBE; @@ -1197,7 +1197,7 @@ static void rs_set_termios(struct tty_struct *tty, const struct ktermios *old_te /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; rs_start(tty); } diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index ef3116e87975..10855e66fda1 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -553,7 +553,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, if (tty->hw_stopped) { if (cts) { - tty->hw_stopped = 0; + tty->hw_stopped = false; if (!mxser_16550A_or_MUST(info)) __mxser_start_tx(info); @@ -563,7 +563,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, } else if (cts) return; - tty->hw_stopped = 1; + tty->hw_stopped = true; if (!mxser_16550A_or_MUST(info)) __mxser_stop_tx(info); } @@ -1361,7 +1361,7 @@ static void mxser_set_termios(struct tty_struct *tty, spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; mxser_start(tty); } diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 7aa05ebed8e1..b411a26cc092 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -42,6 +42,7 @@ #include <linux/ctype.h> #include <linux/mm.h> #include <linux/math.h> +#include <linux/nospec.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/poll.h> @@ -128,6 +129,7 @@ struct gsm_msg { enum gsm_dlci_state { DLCI_CLOSED, + DLCI_WAITING_CONFIG, /* Waiting for DLCI configuration from user */ DLCI_CONFIGURE, /* Sending PN (for adaption > 1) */ DLCI_OPENING, /* Sending SABM not seen UA */ DLCI_OPEN, /* SABM/UA complete */ @@ -330,6 +332,7 @@ struct gsm_mux { unsigned int t3; /* Power wake-up timer in seconds. */ int n2; /* Retry count */ u8 k; /* Window size */ + bool wait_config; /* Wait for configuration by ioctl before DLCI open */ u32 keep_alive; /* Control channel keep-alive in 10ms */ /* Statistics (not currently exposed) */ @@ -451,6 +454,7 @@ static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk); static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, u8 ctrl); static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg); +static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr); static void gsmld_write_trigger(struct gsm_mux *gsm); static void gsmld_write_task(struct work_struct *work); @@ -2280,6 +2284,7 @@ static void gsm_dlci_begin_open(struct gsm_dlci *dlci) switch (dlci->state) { case DLCI_CLOSED: + case DLCI_WAITING_CONFIG: case DLCI_CLOSING: dlci->retries = gsm->n2; if (!need_pn) { @@ -2311,6 +2316,7 @@ static void gsm_dlci_set_opening(struct gsm_dlci *dlci) { switch (dlci->state) { case DLCI_CLOSED: + case DLCI_WAITING_CONFIG: case DLCI_CLOSING: dlci->state = DLCI_OPENING; break; @@ -2320,6 +2326,24 @@ static void gsm_dlci_set_opening(struct gsm_dlci *dlci) } /** + * gsm_dlci_set_wait_config - wait for channel configuration + * @dlci: DLCI to configure + * + * Wait for a DLCI configuration from the application. + */ +static void gsm_dlci_set_wait_config(struct gsm_dlci *dlci) +{ + switch (dlci->state) { + case DLCI_CLOSED: + case DLCI_CLOSING: + dlci->state = DLCI_WAITING_CONFIG; + break; + default: + break; + } +} + +/** * gsm_dlci_begin_close - start channel open procedure * @dlci: DLCI to open * @@ -2453,6 +2477,128 @@ static void gsm_kick_timer(struct timer_list *t) pr_info("%s TX queue stalled\n", __func__); } +/** + * gsm_dlci_copy_config_values - copy DLCI configuration + * @dlci: source DLCI + * @dc: configuration structure to fill + */ +static void gsm_dlci_copy_config_values(struct gsm_dlci *dlci, struct gsm_dlci_config *dc) +{ + memset(dc, 0, sizeof(*dc)); + dc->channel = (u32)dlci->addr; + dc->adaption = (u32)dlci->adaption; + dc->mtu = (u32)dlci->mtu; + dc->priority = (u32)dlci->prio; + if (dlci->ftype == UIH) + dc->i = 1; + else + dc->i = 2; + dc->k = (u32)dlci->k; +} + +/** + * gsm_dlci_config - configure DLCI from configuration + * @dlci: DLCI to configure + * @dc: DLCI configuration + * @open: open DLCI after configuration? + */ +static int gsm_dlci_config(struct gsm_dlci *dlci, struct gsm_dlci_config *dc, int open) +{ + struct gsm_mux *gsm; + bool need_restart = false; + bool need_open = false; + unsigned int i; + + /* + * Check that userspace doesn't put stuff in here to prevent breakages + * in the future. + */ + for (i = 0; i < ARRAY_SIZE(dc->reserved); i++) + if (dc->reserved[i]) + return -EINVAL; + + if (!dlci) + return -EINVAL; + gsm = dlci->gsm; + + /* Stuff we don't support yet - I frame transport */ + if (dc->adaption != 1 && dc->adaption != 2) + return -EOPNOTSUPP; + if (dc->mtu > MAX_MTU || dc->mtu < MIN_MTU || dc->mtu > gsm->mru) + return -EINVAL; + if (dc->priority >= 64) + return -EINVAL; + if (dc->i == 0 || dc->i > 2) /* UIH and UI only */ + return -EINVAL; + if (dc->k > 7) + return -EINVAL; + + /* + * See what is needed for reconfiguration + */ + /* Framing fields */ + if (dc->adaption != dlci->adaption) + need_restart = true; + if (dc->mtu != dlci->mtu) + need_restart = true; + if (dc->i != dlci->ftype) + need_restart = true; + /* Requires care */ + if (dc->priority != dlci->prio) + need_restart = true; + + if ((open && gsm->wait_config) || need_restart) + need_open = true; + if (dlci->state == DLCI_WAITING_CONFIG) { + need_restart = false; + need_open = true; + } + + /* + * Close down what is needed, restart and initiate the new + * configuration. + */ + if (need_restart) { + gsm_dlci_begin_close(dlci); + wait_event_interruptible(gsm->event, dlci->state == DLCI_CLOSED); + if (signal_pending(current)) + return -EINTR; + } + /* + * Setup the new configuration values + */ + dlci->adaption = (int)dc->adaption; + + if (dc->mtu) + dlci->mtu = (unsigned int)dc->mtu; + else + dlci->mtu = gsm->mtu; + + if (dc->priority) + dlci->prio = (u8)dc->priority; + else + dlci->prio = roundup(dlci->addr + 1, 8) - 1; + + if (dc->i == 1) + dlci->ftype = UIH; + else if (dc->i == 2) + dlci->ftype = UI; + + if (dc->k) + dlci->k = (u8)dc->k; + else + dlci->k = gsm->k; + + if (need_open) { + if (gsm->initiator) + gsm_dlci_begin_open(dlci); + else + gsm_dlci_set_opening(dlci); + } + + return 0; +} + /* * Allocate/Free DLCI channels */ @@ -3078,6 +3224,7 @@ static struct gsm_mux *gsm_alloc_mux(void) gsm->mru = 64; /* Default to encoding 1 so these should be 64 */ gsm->mtu = 64; gsm->dead = true; /* Avoid early tty opens */ + gsm->wait_config = false; /* Disabled */ gsm->keep_alive = 0; /* Disabled */ /* Store the instance to the mux array or abort if no space is @@ -3130,8 +3277,8 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) int need_close = 0; int need_restart = 0; - /* Stuff we don't support yet - UI or I frame transport, windowing */ - if ((c->adaption != 1 && c->adaption != 2) || c->k) + /* Stuff we don't support yet - UI or I frame transport */ + if (c->adaption != 1 && c->adaption != 2) return -EOPNOTSUPP; /* Check the MRU/MTU range looks sane */ if (c->mru < MIN_MTU || c->mtu < MIN_MTU) @@ -3218,6 +3365,7 @@ static void gsm_copy_config_ext_values(struct gsm_mux *gsm, struct gsm_config_ext *ce) { memset(ce, 0, sizeof(*ce)); + ce->wait_config = gsm->wait_config ? 1 : 0; ce->keep_alive = gsm->keep_alive; } @@ -3233,7 +3381,12 @@ static int gsm_config_ext(struct gsm_mux *gsm, struct gsm_config_ext *ce) if (ce->reserved[i]) return -EINVAL; + /* + * Setup the new configuration values + */ + gsm->wait_config = ce->wait_config ? true : false; gsm->keep_alive = ce->keep_alive; + return 0; } @@ -3433,9 +3586,16 @@ static int gsmld_open(struct tty_struct *tty) tty->receive_room = 65536; /* Attach the initial passive connection */ - gsm->encoding = GSM_ADV_OPT; gsmld_attach_gsm(tty, gsm); + /* The mux will not be activated yet, we wait for correct + * configuration first. + */ + if (gsm->encoding == GSM_BASIC_OPT) + gsm->receive = gsm0_receive; + else + gsm->receive = gsm1_receive; + return 0; } @@ -3556,8 +3716,10 @@ static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd, { struct gsm_config c; struct gsm_config_ext ce; + struct gsm_dlci_config dc; struct gsm_mux *gsm = tty->disc_data; - unsigned int base; + unsigned int base, addr; + struct gsm_dlci *dlci; switch (cmd) { case GSMIOC_GETCONF: @@ -3581,6 +3743,35 @@ static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd, if (copy_from_user(&ce, (void __user *)arg, sizeof(ce))) return -EFAULT; return gsm_config_ext(gsm, &ce); + case GSMIOC_GETCONF_DLCI: + if (copy_from_user(&dc, (void __user *)arg, sizeof(dc))) + return -EFAULT; + if (dc.channel == 0 || dc.channel >= NUM_DLCI) + return -EINVAL; + addr = array_index_nospec(dc.channel, NUM_DLCI); + dlci = gsm->dlci[addr]; + if (!dlci) { + dlci = gsm_dlci_alloc(gsm, addr); + if (!dlci) + return -ENOMEM; + } + gsm_dlci_copy_config_values(dlci, &dc); + if (copy_to_user((void __user *)arg, &dc, sizeof(dc))) + return -EFAULT; + return 0; + case GSMIOC_SETCONF_DLCI: + if (copy_from_user(&dc, (void __user *)arg, sizeof(dc))) + return -EFAULT; + if (dc.channel == 0 || dc.channel >= NUM_DLCI) + return -EINVAL; + addr = array_index_nospec(dc.channel, NUM_DLCI); + dlci = gsm->dlci[addr]; + if (!dlci) { + dlci = gsm_dlci_alloc(gsm, addr); + if (!dlci) + return -ENOMEM; + } + return gsm_dlci_config(dlci, &dc, 0); default: return n_tty_ioctl_helper(tty, cmd, arg); } @@ -4008,7 +4199,6 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) { struct gsm_dlci *dlci = tty->driver_data; struct tty_port *port = &dlci->port; - struct gsm_mux *gsm = dlci->gsm; port->count++; tty_port_tty_set(port, tty); @@ -4018,10 +4208,15 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) a DM straight back. This is ok as that will have caused a hangup */ tty_port_set_initialized(port, true); /* Start sending off SABM messages */ - if (gsm->initiator) - gsm_dlci_begin_open(dlci); - else - gsm_dlci_set_opening(dlci); + if (!dlci->gsm->wait_config) { + /* Start sending off SABM messages */ + if (dlci->gsm->initiator) + gsm_dlci_begin_open(dlci); + else + gsm_dlci_set_opening(dlci); + } else { + gsm_dlci_set_wait_config(dlci); + } /* And wait for virtual carrier */ return tty_port_block_til_ready(port, tty, filp); } @@ -4142,6 +4337,7 @@ static int gsmtty_ioctl(struct tty_struct *tty, { struct gsm_dlci *dlci = tty->driver_data; struct gsm_netconfig nc; + struct gsm_dlci_config dc; int index; if (dlci->state == DLCI_CLOSED) @@ -4165,6 +4361,23 @@ static int gsmtty_ioctl(struct tty_struct *tty, gsm_destroy_network(dlci); mutex_unlock(&dlci->mutex); return 0; + case GSMIOC_GETCONF_DLCI: + if (copy_from_user(&dc, (void __user *)arg, sizeof(dc))) + return -EFAULT; + if (dc.channel != dlci->addr) + return -EPERM; + gsm_dlci_copy_config_values(dlci, &dc); + if (copy_to_user((void __user *)arg, &dc, sizeof(dc))) + return -EFAULT; + return 0; + case GSMIOC_SETCONF_DLCI: + if (copy_from_user(&dc, (void __user *)arg, sizeof(dc))) + return -EFAULT; + if (dc.channel >= NUM_DLCI) + return -EINVAL; + if (dc.channel != 0 && dc.channel != dlci->addr) + return -EPERM; + return gsm_dlci_config(dlci, &dc, 1); case TIOCMIWAIT: return gsm_wait_modem_change(dlci, (u32)arg); default: diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index c8f56c9b1a1c..1c9e5d2ea7de 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -28,27 +28,26 @@ * EAGAIN */ -#include <linux/types.h> -#include <linux/major.h> +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/ctype.h> #include <linux/errno.h> -#include <linux/signal.h> +#include <linux/export.h> #include <linux/fcntl.h> +#include <linux/file.h> +#include <linux/jiffies.h> +#include <linux/math.h> +#include <linux/poll.h> +#include <linux/ratelimit.h> #include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/timer.h> -#include <linux/ctype.h> -#include <linux/mm.h> -#include <linux/string.h> +#include <linux/signal.h> #include <linux/slab.h> -#include <linux/poll.h> -#include <linux/bitops.h> -#include <linux/audit.h> -#include <linux/file.h> +#include <linux/string.h> +#include <linux/tty.h> +#include <linux/types.h> #include <linux/uaccess.h> -#include <linux/module.h> -#include <linux/ratelimit.h> #include <linux/vmalloc.h> + #include "tty.h" /* @@ -625,7 +624,7 @@ static size_t __process_echoes(struct tty_struct *tty) c = echo_buf(ldata, tail); if (c == ECHO_OP_START) { unsigned char op; - int no_space_left = 0; + bool space_left = true; /* * Since add_echo_byte() is called without holding @@ -664,7 +663,7 @@ static size_t __process_echoes(struct tty_struct *tty) num_bs = 8 - (num_chars & 7); if (num_bs > space) { - no_space_left = 1; + space_left = false; break; } space -= num_bs; @@ -690,7 +689,7 @@ static size_t __process_echoes(struct tty_struct *tty) case ECHO_OP_START: /* This is an escaped echo op start code */ if (!space) { - no_space_left = 1; + space_left = false; break; } tty_put_char(tty, ECHO_OP_START); @@ -710,7 +709,7 @@ static size_t __process_echoes(struct tty_struct *tty) * */ if (space < 2) { - no_space_left = 1; + space_left = false; break; } tty_put_char(tty, '^'); @@ -720,7 +719,7 @@ static size_t __process_echoes(struct tty_struct *tty) tail += 2; } - if (no_space_left) + if (!space_left) break; } else { if (O_OPOST(tty)) { @@ -1177,7 +1176,7 @@ static void n_tty_receive_overrun(struct tty_struct *tty) ldata->num_overrun++; if (time_after(jiffies, ldata->overrun_time + HZ) || - time_after(ldata->overrun_time, jiffies)) { + time_after(ldata->overrun_time, jiffies)) { tty_warn(tty, "%d input overrun(s)\n", ldata->num_overrun); ldata->overrun_time = jiffies; ldata->num_overrun = 0; @@ -1691,7 +1690,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, room = N_TTY_BUF_SIZE - (ldata->read_head - tail); if (I_PARMRK(tty)) - room = (room + 2) / 3; + room = DIV_ROUND_UP(room, 3); room--; if (room <= 0) { overflow = ldata->icanon && ldata->canon_head == tail; diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 287153d32536..1e8fe44a7099 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -365,6 +365,13 @@ static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p) if (dma->prepare_rx_dma) dma->prepare_rx_dma(p); } + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + return dma && dma->tx_running; +} #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { @@ -380,6 +387,11 @@ static inline int serial8250_request_dma(struct uart_8250_port *p) return -1; } static inline void serial8250_release_dma(struct uart_8250_port *p) { } + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + return false; +} #endif static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index ed5a94747692..f801b1f5b46c 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -1014,14 +1014,16 @@ static int brcmuart_probe(struct platform_device *pdev) /* See if a Baud clock has been specified */ baud_mux_clk = of_clk_get_by_name(np, "sw_baud"); if (IS_ERR(baud_mux_clk)) { - if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto release_dma; + } dev_dbg(dev, "BAUD MUX clock not specified\n"); } else { dev_dbg(dev, "BAUD MUX clock found\n"); ret = clk_prepare_enable(baud_mux_clk); if (ret) - return ret; + goto release_dma; priv->baud_mux_clk = baud_mux_clk; init_real_clk_rates(dev, priv); clk_rate = priv->default_mux_rate; @@ -1029,7 +1031,8 @@ static int brcmuart_probe(struct platform_device *pdev) if (clk_rate == 0) { dev_err(dev, "clock-frequency or clk not defined\n"); - return -EINVAL; + ret = -EINVAL; + goto release_dma; } dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not "); @@ -1116,7 +1119,9 @@ err1: serial8250_unregister_port(priv->line); err: brcmuart_free_bufs(dev, priv); - brcmuart_arbitration(priv, 0); +release_dma: + if (priv->dma_enabled) + brcmuart_arbitration(priv, 0); return ret; } @@ -1128,7 +1133,8 @@ static int brcmuart_remove(struct platform_device *pdev) hrtimer_cancel(&priv->hrt); serial8250_unregister_port(priv->line); brcmuart_free_bufs(&pdev->dev, priv); - brcmuart_arbitration(priv, 0); + if (priv->dma_enabled) + brcmuart_arbitration(priv, 0); return 0; } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index ab63c308be0a..13bf535eedcd 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1158,6 +1158,7 @@ void serial8250_unregister_port(int line) uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; uart->capabilities = 0; + serial8250_init_port(uart); serial8250_apply_quirks(uart); uart_add_one_port(&serial8250_reg, &uart->port); } else { diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index d94c3811a8f7..25a9ecf26be6 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -13,36 +13,49 @@ #include <linux/serial_reg.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/slab.h> #include "8250.h" #define UART_DLL_EM 9 #define UART_DLM_EM 10 +#define UART_HCR0_EM 11 + +/* + * A high value for UART_FCR_EM avoids overlapping with existing UART_* + * register defines. UART_FCR_EM_HW is the real HW register offset. + */ +#define UART_FCR_EM 0x10003 +#define UART_FCR_EM_HW 3 + +#define UART_HCR0_EM_SW_RESET BIT(7) /* SW Reset */ struct serial8250_em_priv { - struct clk *sclk; int line; }; -static void serial8250_em_serial_out(struct uart_port *p, int offset, int value) +static void serial8250_em_serial_out_helper(struct uart_port *p, int offset, + int value) { switch (offset) { case UART_TX: /* TX @ 0x00 */ writeb(value, p->membase); break; - case UART_FCR: /* FCR @ 0x0c (+1) */ case UART_LCR: /* LCR @ 0x10 (+1) */ case UART_MCR: /* MCR @ 0x14 (+1) */ case UART_SCR: /* SCR @ 0x20 (+1) */ writel(value, p->membase + ((offset + 1) << 2)); break; + case UART_FCR_EM: + writel(value, p->membase + (UART_FCR_EM_HW << 2)); + break; case UART_IER: /* IER @ 0x04 */ value &= 0x0f; /* only 4 valid bits - not Xscale */ fallthrough; case UART_DLL_EM: /* DLL @ 0x24 (+9) */ case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + case UART_HCR0_EM: /* HCR0 @ 0x2c */ writel(value, p->membase + (offset << 2)); + break; } } @@ -51,20 +64,81 @@ static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset) switch (offset) { case UART_RX: /* RX @ 0x00 */ return readb(p->membase); + case UART_LCR: /* LCR @ 0x10 (+1) */ case UART_MCR: /* MCR @ 0x14 (+1) */ case UART_LSR: /* LSR @ 0x18 (+1) */ case UART_MSR: /* MSR @ 0x1c (+1) */ case UART_SCR: /* SCR @ 0x20 (+1) */ return readl(p->membase + ((offset + 1) << 2)); + case UART_FCR_EM: + return readl(p->membase + (UART_FCR_EM_HW << 2)); case UART_IER: /* IER @ 0x04 */ case UART_IIR: /* IIR @ 0x08 */ case UART_DLL_EM: /* DLL @ 0x24 (+9) */ case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + case UART_HCR0_EM: /* HCR0 @ 0x2c */ return readl(p->membase + (offset << 2)); } return 0; } +static void serial8250_em_reg_update(struct uart_port *p, int off, int value) +{ + unsigned int ier, fcr, lcr, mcr, hcr0; + + ier = serial8250_em_serial_in(p, UART_IER); + fcr = serial8250_em_serial_in(p, UART_FCR_EM); + lcr = serial8250_em_serial_in(p, UART_LCR); + mcr = serial8250_em_serial_in(p, UART_MCR); + hcr0 = serial8250_em_serial_in(p, UART_HCR0_EM); + + serial8250_em_serial_out_helper(p, UART_FCR_EM, fcr | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial8250_em_serial_out_helper(p, UART_HCR0_EM, hcr0 | + UART_HCR0_EM_SW_RESET); + serial8250_em_serial_out_helper(p, UART_HCR0_EM, hcr0 & + ~UART_HCR0_EM_SW_RESET); + + switch (off) { + case UART_FCR_EM: + fcr = value; + break; + case UART_LCR: + lcr = value; + break; + case UART_MCR: + mcr = value; + break; + } + + serial8250_em_serial_out_helper(p, UART_IER, ier); + serial8250_em_serial_out_helper(p, UART_FCR_EM, fcr); + serial8250_em_serial_out_helper(p, UART_MCR, mcr); + serial8250_em_serial_out_helper(p, UART_LCR, lcr); + serial8250_em_serial_out_helper(p, UART_HCR0_EM, hcr0); +} + +static void serial8250_em_serial_out(struct uart_port *p, int offset, int value) +{ + switch (offset) { + case UART_TX: + case UART_SCR: + case UART_IER: + case UART_DLL_EM: + case UART_DLM_EM: + serial8250_em_serial_out_helper(p, offset, value); + break; + case UART_FCR: + serial8250_em_reg_update(p, UART_FCR_EM, value); + break; + case UART_LCR: + case UART_MCR: + serial8250_em_reg_update(p, offset, value); + break; + } +} + static int serial8250_em_serial_dl_read(struct uart_8250_port *up) { return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8; @@ -79,8 +153,10 @@ static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value) static int serial8250_em_probe(struct platform_device *pdev) { struct serial8250_em_priv *priv; + struct device *dev = &pdev->dev; struct uart_8250_port up; struct resource *regs; + struct clk *sclk; int irq, ret; irq = platform_get_irq(pdev, 0); @@ -88,31 +164,26 @@ static int serial8250_em_probe(struct platform_device *pdev) return irq; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(&pdev->dev, "missing registers\n"); - return -EINVAL; - } + if (!regs) + return dev_err_probe(dev, -EINVAL, "missing registers\n"); - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - priv->sclk = devm_clk_get(&pdev->dev, "sclk"); - if (IS_ERR(priv->sclk)) { - dev_err(&pdev->dev, "unable to get clock\n"); - return PTR_ERR(priv->sclk); - } + sclk = devm_clk_get_enabled(dev, "sclk"); + if (IS_ERR(sclk)) + return dev_err_probe(dev, PTR_ERR(sclk), "unable to get clock\n"); memset(&up, 0, sizeof(up)); up.port.mapbase = regs->start; up.port.irq = irq; up.port.type = PORT_16750; up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE; - up.port.dev = &pdev->dev; + up.port.dev = dev; up.port.private_data = priv; - clk_prepare_enable(priv->sclk); - up.port.uartclk = clk_get_rate(priv->sclk); + up.port.uartclk = clk_get_rate(sclk); up.port.iotype = UPIO_MEM32; up.port.serial_in = serial8250_em_serial_in; @@ -121,11 +192,8 @@ static int serial8250_em_probe(struct platform_device *pdev) up.dl_write = serial8250_em_serial_dl_write; ret = serial8250_register_8250_port(&up); - if (ret < 0) { - dev_err(&pdev->dev, "unable to register 8250 port\n"); - clk_disable_unprepare(priv->sclk); - return ret; - } + if (ret < 0) + return dev_err_probe(dev, ret, "unable to register 8250 port\n"); priv->line = ret; platform_set_drvdata(pdev, priv); @@ -137,7 +205,6 @@ static int serial8250_em_remove(struct platform_device *pdev) struct serial8250_em_priv *priv = platform_get_drvdata(pdev); serial8250_unregister_port(priv->line); - clk_disable_unprepare(priv->sclk); return 0; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3ba9c8b93ae6..fe8d79c4ae95 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -15,6 +15,7 @@ #include <linux/moduleparam.h> #include <linux/ioport.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/console.h> #include <linux/gpio/consumer.h> #include <linux/sysrq.h> @@ -1932,6 +1933,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) int serial8250_handle_irq(struct uart_port *port, unsigned int iir) { struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; bool skip_rx = false; unsigned long flags; u16 status; @@ -1957,6 +1959,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) skip_rx = true; if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + pm_wakeup_event(tport->tty->dev, 0); if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } @@ -2016,18 +2020,19 @@ static int serial8250_tx_threshold_handle_irq(struct uart_port *port) static unsigned int serial8250_tx_empty(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + unsigned int result = 0; unsigned long flags; - u16 lsr; serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); - lsr = serial_lsr_in(up); + if (!serial8250_tx_dma_running(up) && uart_lsr_tx_empty(serial_lsr_in(up))) + result = TIOCSER_TEMT; spin_unlock_irqrestore(&port->lock, flags); serial8250_rpm_put(up); - return uart_lsr_tx_empty(lsr) ? TIOCSER_TEMT : 0; + return result; } unsigned int serial8250_do_get_mctrl(struct uart_port *port) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0072892ca7fc..398e5aac2e77 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -248,13 +248,6 @@ config SERIAL_SAMSUNG Choose Y/M here only if you build for such SoC. -config SERIAL_SAMSUNG_UARTS_4 - bool - depends on SERIAL_SAMSUNG - default y - help - Internal node for the common case of 4 Samsung compatible UARTs - config SERIAL_SAMSUNG_UARTS int depends on SERIAL_SAMSUNG @@ -958,7 +951,7 @@ config SERIAL_OMAP_CONSOLE config SERIAL_SIFIVE tristate "SiFive UART support" depends on OF - default SOC_SIFIVE || SOC_CANAAN + default ARCH_SIFIVE || ARCH_CANAAN select SERIAL_CORE help Select this option if you are building a kernel for a device that @@ -968,7 +961,7 @@ config SERIAL_SIFIVE config SERIAL_SIFIVE_CONSOLE bool "Console on SiFive UART" depends on SERIAL_SIFIVE=y - default SOC_SIFIVE || SOC_CANAAN + default ARCH_SIFIVE || ARCH_CANAAN select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 62bc7244dc67..55e82d0bf92d 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -596,6 +596,40 @@ static int bcm_uart_verify_port(struct uart_port *port, return 0; } +#ifdef CONFIG_CONSOLE_POLL +/* + * return true when outstanding tx equals fifo size + */ +static bool bcm_uart_tx_full(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; + return !(port->fifosize - val); +} + +static int bcm_uart_poll_get_char(struct uart_port *port) +{ + unsigned int iestat; + + iestat = bcm_uart_readl(port, UART_IR_REG); + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + return NO_POLL_CHAR; + + return bcm_uart_readl(port, UART_FIFO_REG); +} + +static void bcm_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + while (bcm_uart_tx_full(port)) { + cpu_relax(); + } + + bcm_uart_writel(port, c, UART_FIFO_REG); +} +#endif + /* serial core callbacks */ static const struct uart_ops bcm_uart_ops = { .tx_empty = bcm_uart_tx_empty, @@ -614,6 +648,10 @@ static const struct uart_ops bcm_uart_ops = { .request_port = bcm_uart_request_port, .config_port = bcm_uart_config_port, .verify_port = bcm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = bcm_uart_poll_get_char, + .poll_put_char = bcm_uart_poll_put_char, +#endif }; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 5565f302cb21..349e7da643f0 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -678,15 +678,14 @@ static int cpm_uart_tx_pump(struct uart_port *port) /* Pick next descriptor and fill from buffer */ bdp = pinfo->tx_cur; - while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && - xmit->tail != xmit->head) { + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && !uart_circ_empty(xmit)) { count = 0; p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); while (count < pinfo->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; uart_xmit_advance(port, 1); count++; - if (xmit->head == xmit->tail) + if (uart_circ_empty(xmit)) break; } out_be16(&bdp->cbd_datlen, count); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 074bfed57fc9..c91916e13648 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1296,7 +1296,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) * 10ms at any baud rate. */ sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2; - sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1)); + sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len)); if (sport->rx_dma_rng_buf_len < 16) sport->rx_dma_rng_buf_len = 16; @@ -1406,12 +1406,12 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio struct lpuart_port, port); unsigned long modem = lpuart32_read(&sport->port, UARTMODIR) - & ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); + & ~(UARTMODIR_TXRTSPOL | UARTMODIR_TXRTSE); lpuart32_write(&sport->port, modem, UARTMODIR); if (rs485->flags & SER_RS485_ENABLED) { /* Enable auto RS-485 RTS mode */ - modem |= UARTMODEM_TXRTSE; + modem |= UARTMODIR_TXRTSE; /* * The hardware defaults to RTS logic HIGH while transfer. @@ -1420,9 +1420,9 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem |= UARTMODEM_TXRTSPOL; + modem |= UARTMODIR_TXRTSPOL; else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) - modem &= ~UARTMODEM_TXRTSPOL; + modem &= ~UARTMODIR_TXRTSPOL; } lpuart32_write(&sport->port, modem, UARTMODIR); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 523f296d5747..c5e17569c3ad 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -289,20 +289,6 @@ static inline int imx_uart_is_imx1(struct imx_port *sport) return sport->devdata->devtype == IMX1_UART; } -static inline int imx_uart_is_imx21(struct imx_port *sport) -{ - return sport->devdata->devtype == IMX21_UART; -} - -static inline int imx_uart_is_imx53(struct imx_port *sport) -{ - return sport->devdata->devtype == IMX53_UART; -} - -static inline int imx_uart_is_imx6q(struct imx_port *sport) -{ - return sport->devdata->devtype == IMX6Q_UART; -} /* * Save and restore functions for UCR1, UCR2 and UCR3 registers */ @@ -1808,9 +1794,7 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios, static const char *imx_uart_type(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; - - return sport->port.type == PORT_IMX ? "IMX" : NULL; + return port->type == PORT_IMX ? "IMX" : NULL; } /* @@ -1818,10 +1802,8 @@ static const char *imx_uart_type(struct uart_port *port) */ static void imx_uart_config_port(struct uart_port *port, int flags) { - struct imx_port *sport = (struct imx_port *)port; - if (flags & UART_CONFIG_TYPE) - sport->port.type = PORT_IMX; + port->type = PORT_IMX; } /* @@ -1832,20 +1814,19 @@ static void imx_uart_config_port(struct uart_port *port, int flags) static int imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) { - struct imx_port *sport = (struct imx_port *)port; int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) ret = -EINVAL; - if (sport->port.irq != ser->irq) + if (port->irq != ser->irq) ret = -EINVAL; if (ser->io_type != UPIO_MEM) ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) + if (port->uartclk / 16 != ser->baud_base) ret = -EINVAL; - if (sport->port.mapbase != (unsigned long)ser->iomem_base) + if (port->mapbase != (unsigned long)ser->iomem_base) ret = -EINVAL; - if (sport->port.iobase != ser->port) + if (port->iobase != ser->port) ret = -EINVAL; if (ser->hub6 != 0) ret = -EINVAL; @@ -2262,21 +2243,16 @@ static int imx_uart_probe(struct platform_device *pdev) } sport->port.line = ret; - if (of_get_property(np, "uart-has-rtscts", NULL) || - of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) - sport->have_rtscts = 1; + sport->have_rtscts = of_property_read_bool(np, "uart-has-rtscts") || + of_property_read_bool(np, "fsl,uart-has-rtscts"); /* deprecated */ - if (of_get_property(np, "fsl,dte-mode", NULL)) - sport->dte_mode = 1; + sport->dte_mode = of_property_read_bool(np, "fsl,dte-mode"); - if (of_get_property(np, "rts-gpios", NULL)) - sport->have_rtsgpio = 1; + sport->have_rtsgpio = of_property_present(np, "rts-gpios"); - if (of_get_property(np, "fsl,inverted-tx", NULL)) - sport->inverted_tx = 1; + sport->inverted_tx = of_property_read_bool(np, "fsl,inverted-tx"); - if (of_get_property(np, "fsl,inverted-rx", NULL)) - sport->inverted_rx = 1; + sport->inverted_rx = of_property_read_bool(np, "fsl,inverted-rx"); if (!of_property_read_u32_array(np, "fsl,dma-info", dma_buf_conf, 2)) { sport->rx_period_length = dma_buf_conf[0]; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index e9cacfe7e032..9fee722058f4 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -525,6 +525,11 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } +static bool max310x_reg_noinc(struct device *dev, unsigned int reg) +{ + return reg == MAX310X_RHR_REG; +} + static int max310x_set_baud(struct uart_port *port, int baud) { unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; @@ -651,14 +656,14 @@ static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int { struct max310x_one *one = to_max310x_port(port); - regmap_raw_write(one->regmap, MAX310X_THR_REG, txbuf, len); + regmap_noinc_write(one->regmap, MAX310X_THR_REG, txbuf, len); } static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len) { struct max310x_one *one = to_max310x_port(port); - regmap_raw_read(one->regmap, MAX310X_RHR_REG, rxbuf, len); + regmap_noinc_read(one->regmap, MAX310X_RHR_REG, rxbuf, len); } static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) @@ -1468,6 +1473,10 @@ static struct regmap_config regcfg = { .writeable_reg = max310x_reg_writeable, .volatile_reg = max310x_reg_volatile, .precious_reg = max310x_reg_precious, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, }; #ifdef CONFIG_SPI_MASTER @@ -1553,6 +1562,10 @@ static struct regmap_config regcfg_i2c = { .volatile_reg = max310x_reg_volatile, .precious_reg = max310x_reg_precious, .max_register = MAX310X_I2C_REVID_EXTREG, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, }; static const struct max310x_if_cfg max310x_i2c_if_cfg = { diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 74110017988a..2501db5a7aaf 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -779,7 +779,7 @@ static int meson_uart_remove(struct platform_device *pdev) return 0; } -static struct meson_uart_data s4_uart_data = { +static struct meson_uart_data meson_g12a_uart_data = { .has_xtal_div2 = true, }; @@ -789,8 +789,12 @@ static const struct of_device_id meson_uart_dt_match[] = { { .compatible = "amlogic,meson8b-uart" }, { .compatible = "amlogic,meson-gx-uart" }, { + .compatible = "amlogic,meson-g12a-uart", + .data = (void *)&meson_g12a_uart_data, + }, + { .compatible = "amlogic,meson-s4-uart", - .data = (void *)&s4_uart_data, + .data = (void *)&meson_g12a_uart_data, }, { /* sentinel */ }, }; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index ef6e7bb6105c..a368f4293967 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1587,8 +1587,8 @@ static int mxs_auart_probe(struct platform_device *pdev) } s->port.line = ret; - if (of_get_property(np, "uart-has-rtscts", NULL) || - of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) + if (of_property_read_bool(np, "uart-has-rtscts") || + of_property_read_bool(np, "fsl,uart-has-rtscts") /* deprecated */) set_bit(MXS_AUART_RTSCTS, &s->flags); if (s->port.line >= ARRAY_SIZE(auart_port)) { diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 28fbc927a546..08dc3e2a729c 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -854,21 +854,19 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) } static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, - unsigned int chunk) + unsigned int remaining) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; - unsigned int tx_bytes, c, remaining = chunk; + unsigned int tx_bytes; u8 buf[BYTES_PER_FIFO_WORD]; while (remaining) { memset(buf, 0, sizeof(buf)); tx_bytes = min(remaining, BYTES_PER_FIFO_WORD); - for (c = 0; c < tx_bytes ; c++) { - buf[c] = xmit->buf[xmit->tail]; - uart_xmit_advance(uport, 1); - } + memcpy(buf, &xmit->buf[xmit->tail], tx_bytes); + uart_xmit_advance(uport, tx_bytes); iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); @@ -1535,6 +1533,7 @@ static const struct uart_ops qcom_geni_console_pops = { #ifdef CONFIG_CONSOLE_POLL .poll_get_char = qcom_geni_serial_get_char, .poll_put_char = qcom_geni_serial_poll_put_char, + .poll_init = qcom_geni_serial_port_setup, #endif .pm = qcom_geni_serial_pm, }; diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index de56f383964e..b6de0dc51f29 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -41,7 +41,7 @@ #include <asm/sibyte/swarm.h> -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#if defined(CONFIG_SIBYTE_BCM1x80) #include <asm/sibyte/bcm1480_regs.h> #include <asm/sibyte/bcm1480_int.h> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2bd32c8ece39..54e82f476a2c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio/consumer.h> +#include <linux/kernel.h> #include <linux/of.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> @@ -48,9 +49,6 @@ static struct lock_class_key port_lock_key; */ #define RS485_MAX_RTS_DELAY 100 /* msecs */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - const struct ktermios *old_termios); -static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, enum uart_pm_state pm_state); @@ -137,7 +135,7 @@ static void __uart_start(struct tty_struct *tty) struct uart_state *state = tty->driver_data; struct uart_port *port = state->uart_port; - if (port && !uart_tx_stopped(port)) + if (port && !(port->flags & UPF_DEAD) && !uart_tx_stopped(port)) port->ops->start_tx(port); } @@ -177,6 +175,51 @@ static void uart_port_dtr_rts(struct uart_port *uport, bool active) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } +/* Caller holds port mutex */ +static void uart_change_line_settings(struct tty_struct *tty, struct uart_state *state, + const struct ktermios *old_termios) +{ + struct uart_port *uport = uart_port_check(state); + struct ktermios *termios; + bool old_hw_stopped; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || uport->type == PORT_UNKNOWN) + return; + + termios = &tty->termios; + uport->ops->set_termios(uport, termios, old_termios); + + /* + * Set modem status enables based on termios cflag + */ + spin_lock_irq(&uport->lock); + if (termios->c_cflag & CRTSCTS) + uport->status |= UPSTAT_CTS_ENABLE; + else + uport->status &= ~UPSTAT_CTS_ENABLE; + + if (termios->c_cflag & CLOCAL) + uport->status &= ~UPSTAT_DCD_ENABLE; + else + uport->status |= UPSTAT_DCD_ENABLE; + + /* reset sw-assisted CTS flow control based on (possibly) new mode */ + old_hw_stopped = uport->hw_stopped; + uport->hw_stopped = uart_softcts_mode(uport) && + !(uport->ops->get_mctrl(uport) & TIOCM_CTS); + if (uport->hw_stopped != old_hw_stopped) { + if (!old_hw_stopped) + uport->ops->stop_tx(uport); + else + __uart_start(tty); + } + spin_unlock_irq(&uport->lock); +} + /* * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. @@ -232,7 +275,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, /* * Initialise the hardware port settings. */ - uart_change_speed(tty, state, NULL); + uart_change_line_settings(tty, state, NULL); /* * Setup the RTS and DTR signals once the @@ -485,52 +528,6 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) } EXPORT_SYMBOL(uart_get_divisor); -/* Caller holds port mutex */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - const struct ktermios *old_termios) -{ - struct uart_port *uport = uart_port_check(state); - struct ktermios *termios; - int hw_stopped; - - /* - * If we have no tty, termios, or the port does not exist, - * then we can't set the parameters for this port. - */ - if (!tty || uport->type == PORT_UNKNOWN) - return; - - termios = &tty->termios; - uport->ops->set_termios(uport, termios, old_termios); - - /* - * Set modem status enables based on termios cflag - */ - spin_lock_irq(&uport->lock); - if (termios->c_cflag & CRTSCTS) - uport->status |= UPSTAT_CTS_ENABLE; - else - uport->status &= ~UPSTAT_CTS_ENABLE; - - if (termios->c_cflag & CLOCAL) - uport->status &= ~UPSTAT_DCD_ENABLE; - else - uport->status |= UPSTAT_DCD_ENABLE; - - /* reset sw-assisted CTS flow control based on (possibly) new mode */ - hw_stopped = uport->hw_stopped; - uport->hw_stopped = uart_softcts_mode(uport) && - !(uport->ops->get_mctrl(uport) & TIOCM_CTS); - if (uport->hw_stopped) { - if (!hw_stopped) - uport->ops->stop_tx(uport); - } else { - if (hw_stopped) - __uart_start(tty); - } - spin_unlock_irq(&uport->lock); -} - static int uart_put_char(struct tty_struct *tty, unsigned char c) { struct uart_state *state = tty->driver_data; @@ -994,7 +991,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, current->comm, tty_name(port->tty)); } - uart_change_speed(tty, state, NULL); + uart_change_line_settings(tty, state, NULL); } } else { retval = uart_startup(tty, state, true); @@ -1491,7 +1488,7 @@ static int uart_set_iso7816_config(struct uart_port *port, * There are 5 words reserved for future use. Check that userspace * doesn't put stuff in there to prevent breakages in the future. */ - for (i = 0; i < 5; i++) + for (i = 0; i < ARRAY_SIZE(iso7816.reserved); i++) if (iso7816.reserved[i]) return -EINVAL; @@ -1552,7 +1549,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) goto out; /* rs485_config requires more locking than others */ - if (cmd == TIOCGRS485) + if (cmd == TIOCSRS485) down_write(&tty->termios_rwsem); mutex_lock(&port->mutex); @@ -1595,7 +1592,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) } out_up: mutex_unlock(&port->mutex); - if (cmd == TIOCGRS485) + if (cmd == TIOCSRS485) up_write(&tty->termios_rwsem); out: return ret; @@ -1656,15 +1653,15 @@ static void uart_set_termios(struct tty_struct *tty, goto out; } - uart_change_speed(tty, state, old_termios); + uart_change_line_settings(tty, state, old_termios); /* reload cflag from termios; port driver may have overridden flags */ cflag = tty->termios.c_cflag; /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + if (((old_termios->c_cflag & CBAUD) != B0) && ((cflag & CBAUD) == B0)) uart_clear_mctrl(uport, TIOCM_RTS | TIOCM_DTR); /* Handle transition away from B0 status */ - else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + else if (((old_termios->c_cflag & CBAUD) == B0) && ((cflag & CBAUD) != B0)) { unsigned int mask = TIOCM_DTR; if (!(cflag & CRTSCTS) || !tty_throttled(tty)) @@ -2452,7 +2449,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) ret = ops->startup(uport); if (ret == 0) { if (tty) - uart_change_speed(tty, state, NULL); + uart_change_line_settings(tty, state, NULL); spin_lock_irq(&uport->lock); if (!(uport->rs485.flags & SER_RS485_ENABLED)) ops->set_mctrl(uport, uport->mctrl); @@ -2593,6 +2590,7 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) { struct uart_driver *drv = driver->driver_state; struct uart_state *state = drv->state + line; + enum uart_pm_state pm_state; struct tty_port *tport; struct uart_port *port; int baud = 9600; @@ -2610,6 +2608,9 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) goto out; } + pm_state = state->pm_state; + uart_change_pm(state, UART_PM_STATE_ON); + if (port->ops->poll_init) { /* * We don't set initialized as we only initialized the hw, @@ -2626,6 +2627,8 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) console_list_unlock(); } out: + if (ret) + uart_change_pm(state, pm_state); mutex_unlock(&tport->mutex); return ret; } @@ -3305,13 +3308,13 @@ void uart_handle_cts_change(struct uart_port *uport, bool active) if (uart_softcts_mode(uport)) { if (uport->hw_stopped) { if (active) { - uport->hw_stopped = 0; + uport->hw_stopped = false; uport->ops->start_tx(uport); uart_write_wakeup(uport); } } else { if (!active) { - uport->hw_stopped = 1; + uport->hw_stopped = true; uport->ops->stop_tx(uport); } } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index caa09a0c48f4..7c9457962a3d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -588,14 +588,28 @@ static void sci_start_tx(struct uart_port *port) if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && dma_submit_error(s->cookie_tx)) { + if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) + /* Switch irq from SCIF to DMA */ + disable_irq(s->irqs[SCIx_TXI_IRQ]); + s->cookie_tx = 0; schedule_work(&s->work_tx); } #endif - if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + if (!s->chan_tx || s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE || + port->type == PORT_SCIFA || port->type == PORT_SCIFB) { /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = serial_port_in(port, SCSCR); + + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to start + * the transmit process. + */ + if (port->type == PORT_SCI) + ctrl |= SCSCR_TE; + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); } } @@ -833,6 +847,11 @@ static void sci_transmit_chars(struct uart_port *port) } else if (!uart_circ_empty(xmit) && !stopped) { c = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else if (port->type == PORT_SCI && uart_circ_empty(xmit)) { + ctrl = serial_port_in(port, SCSCR); + ctrl &= ~SCSCR_TE; + serial_port_out(port, SCSCR, ctrl); + return; } else { break; } @@ -846,9 +865,16 @@ static void sci_transmit_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) - sci_stop_tx(port); + if (uart_circ_empty(xmit)) { + if (port->type == PORT_SCI) { + ctrl = serial_port_in(port, SCSCR); + ctrl &= ~SCSCR_TIE; + ctrl |= SCSCR_TEIE; + serial_port_out(port, SCSCR, ctrl); + } + sci_stop_tx(port); + } } static void sci_receive_chars(struct uart_port *port) @@ -1192,9 +1218,15 @@ static void sci_dma_tx_complete(void *arg) schedule_work(&s->work_tx); } else { s->cookie_tx = -EINVAL; - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB || + s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) { u16 ctrl = serial_port_in(port, SCSCR); serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); + if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) { + /* Switch irq from DMA to SCIF */ + dmaengine_pause(s->chan_tx_saved); + enable_irq(s->irqs[SCIx_TXI_IRQ]); + } } } @@ -1266,9 +1298,13 @@ static void sci_dma_rx_reenable_irq(struct sci_port *s) /* Direct new serial port interrupts back to CPU */ scr = serial_port_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - scr &= ~SCSCR_RDRQE; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB || + s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) { enable_irq(s->irqs[SCIx_RXI_IRQ]); + if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) + scif_set_rtrg(port, s->rx_trigger); + else + scr &= ~SCSCR_RDRQE; } serial_port_out(port, SCSCR, scr | SCSCR_RIE); } @@ -1505,7 +1541,8 @@ static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t) tty_flip_buffer_push(&port->state->port); } - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB || + s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) sci_dma_rx_submit(s, true); sci_dma_rx_reenable_irq(s); @@ -1531,15 +1568,12 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port, memset(&cfg, 0, sizeof(cfg)); cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) { - cfg.dst_addr = port->mapbase + - (sci_getreg(port, SCxTDR)->offset << port->regshift); - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - } else { - cfg.src_addr = port->mapbase + - (sci_getreg(port, SCxRDR)->offset << port->regshift); - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - } + cfg.dst_addr = port->mapbase + + (sci_getreg(port, SCxTDR)->offset << port->regshift); + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + cfg.src_addr = port->mapbase + + (sci_getreg(port, SCxRDR)->offset << port->regshift); + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; ret = dmaengine_slave_config(chan, &cfg); if (ret) { @@ -1574,7 +1608,7 @@ static void sci_request_dma(struct uart_port *port) * Don't request a dma channel if no channel was specified * in the device tree. */ - if (!of_find_property(port->dev->of_node, "dmas", NULL)) + if (!of_property_present(port->dev->of_node, "dmas")) return; chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV); @@ -1632,7 +1666,8 @@ static void sci_request_dma(struct uart_port *port) s->chan_rx_saved = s->chan_rx = chan; - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB || + s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) sci_dma_rx_submit(s, false); } } @@ -1685,9 +1720,15 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) u16 ssr = serial_port_in(port, SCxSR); /* Disable future Rx interrupts */ - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - disable_irq_nosync(irq); - scr |= SCSCR_RDRQE; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB || + s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) { + disable_irq_nosync(s->irqs[SCIx_RXI_IRQ]); + if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) { + scif_set_rtrg(port, 1); + scr |= SCSCR_RIE; + } else { + scr |= SCSCR_RDRQE; + } } else { if (sci_dma_rx_submit(s, false) < 0) goto handle_pio; @@ -1737,6 +1778,24 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr) return IRQ_HANDLED; } +static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + unsigned long flags; + unsigned short ctrl; + + if (port->type != PORT_SCI) + return sci_tx_interrupt(irq, ptr); + + spin_lock_irqsave(&port->lock, flags); + ctrl = serial_port_in(port, SCSCR); + ctrl &= ~(SCSCR_TE | SCSCR_TEIE); + serial_port_out(port, SCSCR, ctrl); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + static irqreturn_t sci_br_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; @@ -1873,7 +1932,7 @@ static const struct sci_irq_desc { [SCIx_TEI_IRQ] = { .desc = "tx end", - .handler = sci_tx_interrupt, + .handler = sci_tx_end_interrupt, }, /* @@ -2580,8 +2639,14 @@ done: sci_set_mctrl(port, port->mctrl); } - scr_val |= SCSCR_RE | SCSCR_TE | - (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to + * start the transmitting process. So skip setting TE here for SCI. + */ + if (port->type != PORT_SCI) + scr_val |= SCSCR_TE; + scr_val |= SCSCR_RE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); serial_port_out(port, SCSCR, scr_val | s->hscif_tot); if ((srr + 1 == 5) && (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) { @@ -3149,7 +3214,7 @@ static int sci_remove(struct platform_device *dev) #define SCI_OF_TYPE(data) ((unsigned long)(data) >> 16) #define SCI_OF_REGTYPE(data) ((unsigned long)(data) & 0xffff) -static const struct of_device_id of_sci_match[] = { +static const struct of_device_id of_sci_match[] __maybe_unused = { /* SoC-specific types */ { .compatible = "renesas,scif-r7s72100", diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index c0ae78632dda..0b65563c4e9e 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -59,6 +59,9 @@ enum { #define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ #define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ +/* Serial Control Register, SCI only bits */ +#define SCSCR_TEIE BIT(2) /* Transmit End Interrupt Enable */ + /* Serial Control Register, SCIFA/SCIFB only bits */ #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 492a3bdab5ba..b58f51296ace 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -1250,7 +1250,7 @@ static struct platform_driver sprd_platform_driver = { .remove = sprd_remove, .driver = { .name = "sprd_serial", - .of_match_table = of_match_ptr(serial_ids), + .of_match_table = serial_ids, .pm = &sprd_pm_ops, }, }; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 767ff9fdb2e5..1e38fc9b10c1 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -693,8 +693,9 @@ static void stm32_usart_transmit_chars(struct uart_port *port) int ret; if (!stm32_port->hw_flow_control && - port->rs485.flags & SER_RS485_ENABLED) { - stm32_port->txdone = false; + port->rs485.flags & SER_RS485_ENABLED && + (port->x_char || + !(uart_circ_empty(xmit) || uart_tx_stopped(port)))) { stm32_usart_tc_interrupt_disable(port); stm32_usart_rs485_rts_enable(port); } @@ -743,7 +744,6 @@ static void stm32_usart_transmit_chars(struct uart_port *port) stm32_usart_tx_interrupt_disable(port); if (!stm32_port->hw_flow_control && port->rs485.flags & SER_RS485_ENABLED) { - stm32_port->txdone = true; stm32_usart_tc_interrupt_enable(port); } } diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index 0ec41a732c88..903285b5aea7 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -203,7 +203,6 @@ struct stm32_port { bool hw_flow_control; bool swap; /* swap RX & TX pins */ bool fifoen; - bool txdone; int rxftcfg; /* RX FIFO threshold CFG */ int txftcfg; /* TX FIFO threshold CFG */ bool wakeup_src; diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index ccb809216e94..0fbeb3dbd843 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1403,7 +1403,7 @@ static int zs_probe(struct platform_device *op) int keyboard_mouse = 0; int err; - if (of_find_property(op->dev.of_node, "keyboard", NULL)) + if (of_property_present(op->dev.of_node, "keyboard")) keyboard_mouse = 1; /* uarts must come before keyboards/mice */ @@ -1553,7 +1553,7 @@ static int __init sunzilog_init(void) for_each_node_by_name(dp, "zs") { num_sunzilog++; - if (of_find_property(dp, "keyboard", NULL)) + if (of_property_present(dp, "keyboard")) num_keybms++; } diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 32c7a5b43f8e..404230c1ebb2 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -366,15 +366,14 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port) /* Pick next descriptor and fill from buffer */ bdp = qe_port->tx_cur; - while (!(ioread16be(&bdp->status) & BD_SC_READY) && - (xmit->tail != xmit->head)) { + while (!(ioread16be(&bdp->status) & BD_SC_READY) && !uart_circ_empty(xmit)) { count = 0; p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); while (count < qe_port->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; uart_xmit_advance(port, 1); count++; - if (xmit->head == xmit->tail) + if (uart_circ_empty(xmit)) break; } @@ -1179,7 +1178,7 @@ static int soft_uart_init(struct platform_device *ofdev) struct qe_firmware_info *qe_fw_info; int ret; - if (of_find_property(np, "soft-uart", NULL)) { + if (of_property_read_bool(np, "soft-uart")) { dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); soft_uart = 1; } else { diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 33f258d6fef9..16e469e581ec 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -287,7 +287,6 @@ struct slgt_info { unsigned char *tx_buf; int tx_count; - char *flag_buf; bool drop_rts_on_tx_done; struct _input_signal_events input_signal_events; @@ -730,7 +729,7 @@ static void set_termios(struct tty_struct *tty, /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; tx_release(tty); } } @@ -1953,13 +1952,13 @@ static void cts_change(struct slgt_info *info, unsigned short status) if (info->port.tty) { if (info->port.tty->hw_stopped) { if (info->signals & SerialSignal_CTS) { - info->port.tty->hw_stopped = 0; + info->port.tty->hw_stopped = false; info->pending_bh |= BH_TRANSMIT; return; } } else { if (!(info->signals & SerialSignal_CTS)) - info->port.tty->hw_stopped = 1; + info->port.tty->hw_stopped = true; } } } @@ -3244,13 +3243,7 @@ static int alloc_tmp_rbuf(struct slgt_info *info) info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); if (info->tmp_rbuf == NULL) return -ENOMEM; - /* unused flag buffer to satisfy receive_buf calling interface */ - info->flag_buf = kzalloc(info->max_frame_size + 5, GFP_KERNEL); - if (!info->flag_buf) { - kfree(info->tmp_rbuf); - info->tmp_rbuf = NULL; - return -ENOMEM; - } + return 0; } @@ -3258,8 +3251,6 @@ static void free_tmp_rbuf(struct slgt_info *info) { kfree(info->tmp_rbuf); info->tmp_rbuf = NULL; - kfree(info->flag_buf); - info->flag_buf = NULL; } /* @@ -4657,7 +4648,8 @@ check_again: hdlcdev_rx(info,info->tmp_rbuf, framesize); else #endif - ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); + ldisc_receive_buf(tty, info->tmp_rbuf, NULL, + framesize); } } free_rbufs(info, start, end); @@ -4691,8 +4683,8 @@ static bool rx_get_buf(struct slgt_info *info) DBGDATA(info, info->rbufs[i].buf, count, "rx"); DBGINFO(("rx_get_buf size=%d\n", count)); if (count) - ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, - info->flag_buf, count); + ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, NULL, + count); free_rbufs(info, i, i); return true; } diff --git a/drivers/tty/tty.h b/drivers/tty/tty.h index f45cd683c02e..1e0d80e98d26 100644 --- a/drivers/tty/tty.h +++ b/drivers/tty/tty.h @@ -62,6 +62,8 @@ int __tty_check_change(struct tty_struct *tty, int sig); int tty_check_change(struct tty_struct *tty); void __stop_tty(struct tty_struct *tty); void __start_tty(struct tty_struct *tty); +void tty_write_unlock(struct tty_struct *tty); +int tty_write_lock(struct tty_struct *tty, int ndelay); void tty_vhangup_session(struct tty_struct *tty); void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); int tty_signal_session_leader(struct tty_struct *tty, int exit_session); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 36fb945fdad4..cfb3da0dee47 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -933,13 +933,13 @@ static ssize_t tty_read(struct kiocb *iocb, struct iov_iter *to) return i; } -static void tty_write_unlock(struct tty_struct *tty) +void tty_write_unlock(struct tty_struct *tty) { mutex_unlock(&tty->atomic_write_lock); wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); } -static int tty_write_lock(struct tty_struct *tty, int ndelay) +int tty_write_lock(struct tty_struct *tty, int ndelay) { if (!mutex_trylock(&tty->atomic_write_lock)) { if (ndelay) @@ -3614,31 +3614,13 @@ static struct ctl_table tty_table[] = { { } }; -static struct ctl_table tty_dir_table[] = { - { - .procname = "tty", - .mode = 0555, - .child = tty_table, - }, - { } -}; - -static struct ctl_table tty_root_table[] = { - { - .procname = "dev", - .mode = 0555, - .child = tty_dir_table, - }, - { } -}; - /* * Ok, now we can initialize the rest of the tty devices and can count * on memory allocations, interrupts etc.. */ int __init tty_init(void) { - register_sysctl_table(tty_root_table); + register_sysctl_init("dev/tty", tty_table); cdev_init(&tty_cdev, &tty_fops); if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 12983ce4e43e..2e88b414cf95 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -7,6 +7,7 @@ * discipline handling modules (like SLIP). */ +#include <linux/bits.h> #include <linux/types.h> #include <linux/termios.h> #include <linux/errno.h> @@ -40,10 +41,10 @@ /* * Internal flag options for termios setting behavior */ -#define TERMIOS_FLUSH 1 -#define TERMIOS_WAIT 2 -#define TERMIOS_TERMIO 4 -#define TERMIOS_OLD 8 +#define TERMIOS_FLUSH BIT(0) +#define TERMIOS_WAIT BIT(1) +#define TERMIOS_TERMIO BIT(2) +#define TERMIOS_OLD BIT(3) /** @@ -500,21 +501,42 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios); tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios); - ld = tty_ldisc_ref(tty); + if (opt & (TERMIOS_FLUSH|TERMIOS_WAIT)) { +retry_write_wait: + retval = wait_event_interruptible(tty->write_wait, !tty_chars_in_buffer(tty)); + if (retval < 0) + return retval; - if (ld != NULL) { - if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); - } + if (tty_write_lock(tty, 0) < 0) + goto retry_write_wait; - if (opt & TERMIOS_WAIT) { - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -ERESTARTSYS; - } + /* Racing writer? */ + if (tty_chars_in_buffer(tty)) { + tty_write_unlock(tty); + goto retry_write_wait; + } - tty_set_termios(tty, &tmp_termios); + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + + if ((opt & TERMIOS_WAIT) && tty->ops->wait_until_sent) { + tty->ops->wait_until_sent(tty, 0); + if (signal_pending(current)) { + tty_write_unlock(tty); + return -ERESTARTSYS; + } + } + + tty_set_termios(tty, &tmp_termios); + + tty_write_unlock(tty); + } else { + tty_set_termios(tty, &tmp_termios); + } /* FIXME: Arguably if tmp_termios == tty->termios AND the actual requested termios was not tmp_termios then we may diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index e758f44729e7..3f68e213df1f 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -58,7 +58,6 @@ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; int tty_register_ldisc(struct tty_ldisc_ops *new_ldisc) { unsigned long flags; - int ret = 0; if (new_ldisc->num < N_TTY || new_ldisc->num >= NR_LDISCS) return -EINVAL; @@ -67,7 +66,7 @@ int tty_register_ldisc(struct tty_ldisc_ops *new_ldisc) tty_ldiscs[new_ldisc->num] = new_ldisc; raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(tty_register_ldisc); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 3c2ea9c098f7..5c5ca74c03af 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -135,10 +135,9 @@ const struct consw *conswitchp; #define DEFAULT_CURSOR_BLINK_MS 200 struct vc vc_cons [MAX_NR_CONSOLES]; +EXPORT_SYMBOL(vc_cons); -#ifndef VT_SINGLE_DRIVER static const struct consw *con_driver_map[MAX_NR_CONSOLES]; -#endif static int con_open(struct tty_struct *, struct file *); static void vc_init(struct vc_data *vc, unsigned int rows, @@ -162,6 +161,7 @@ int default_utf8 = true; module_param(default_utf8, int, S_IRUGO | S_IWUSR); int global_cursor_default = -1; module_param(global_cursor_default, int, S_IRUGO | S_IWUSR); +EXPORT_SYMBOL(global_cursor_default); static int cur_default = CUR_UNDERLINE; module_param(cur_default, int, S_IRUGO | S_IWUSR); @@ -174,6 +174,7 @@ static int ignore_poke; int do_poke_blanked_console; int console_blanked; +EXPORT_SYMBOL(console_blanked); static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */ static int vesa_off_interval; @@ -190,8 +191,10 @@ static DECLARE_WORK(con_driver_unregister_work, con_driver_unregister_callback); * saved_* variants are for save/restore around kernel debugger enter/leave */ int fg_console; +EXPORT_SYMBOL(fg_console); int last_console; int want_console = -1; + static int saved_fg_console; static int saved_last_console; static int saved_want_console; @@ -223,6 +226,7 @@ static int scrollback_delta; * the console on our behalf. */ int (*console_blank_hook)(int); +EXPORT_SYMBOL(console_blank_hook); static DEFINE_TIMER(console_timer, blank_screen_t); static int blank_state; @@ -639,6 +643,7 @@ void update_region(struct vc_data *vc, unsigned long start, int count) set_cursor(vc); } } +EXPORT_SYMBOL(update_region); /* Structure of attributes is hardware-dependent */ @@ -984,6 +989,7 @@ void redraw_screen(struct vc_data *vc, int is_switch) notify_update(vc); } } +EXPORT_SYMBOL(redraw_screen); /* * Allocation, freeing and resizing of VTs. @@ -1000,10 +1006,10 @@ static void visual_init(struct vc_data *vc, int num, int init) if (vc->vc_sw) module_put(vc->vc_sw->owner); vc->vc_sw = conswitchp; -#ifndef VT_SINGLE_DRIVER + if (con_driver_map[num]) vc->vc_sw = con_driver_map[num]; -#endif + __module_get(vc->vc_sw->owner); vc->vc_num = num; vc->vc_display_fg = &master_display_fg; @@ -1305,6 +1311,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { return vc_do_resize(vc->port.tty, vc, cols, rows); } +EXPORT_SYMBOL(vc_resize); /** * vt_resize - resize a VT @@ -1368,6 +1375,7 @@ enum { EPecma = 0, EPdec, EPeq, EPgt, EPlt}; const unsigned char color_table[] = { 0, 4, 2, 6, 1, 5, 3, 7, 8,12,10,14, 9,13,11,15 }; +EXPORT_SYMBOL(color_table); /* the default colour table, for VGA+ colour systems */ unsigned char default_red[] = { @@ -1375,18 +1383,21 @@ unsigned char default_red[] = { 0x55, 0xff, 0x55, 0xff, 0x55, 0xff, 0x55, 0xff }; module_param_array(default_red, byte, NULL, S_IRUGO | S_IWUSR); +EXPORT_SYMBOL(default_red); unsigned char default_grn[] = { 0x00, 0x00, 0xaa, 0x55, 0x00, 0x00, 0xaa, 0xaa, 0x55, 0x55, 0xff, 0xff, 0x55, 0x55, 0xff, 0xff }; module_param_array(default_grn, byte, NULL, S_IRUGO | S_IWUSR); +EXPORT_SYMBOL(default_grn); unsigned char default_blu[] = { 0x00, 0x00, 0x00, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0x55, 0x55, 0x55, 0x55, 0xff, 0xff, 0xff, 0xff }; module_param_array(default_blu, byte, NULL, S_IRUGO | S_IWUSR); +EXPORT_SYMBOL(default_blu); /* * gotoxy() must verify all boundaries, because the arguments @@ -3143,93 +3154,84 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) return -EFAULT; ret = 0; - switch (type) - { - case TIOCL_SETSEL: - ret = set_selection_user((struct tiocl_selection - __user *)(p+1), tty); - break; - case TIOCL_PASTESEL: - ret = paste_selection(tty); - break; - case TIOCL_UNBLANKSCREEN: - console_lock(); - unblank_screen(); - console_unlock(); - break; - case TIOCL_SELLOADLUT: - console_lock(); - ret = sel_loadlut(p); - console_unlock(); - break; - case TIOCL_GETSHIFTSTATE: + switch (type) { + case TIOCL_SETSEL: + return set_selection_user((struct tiocl_selection + __user *)(p+1), tty); + case TIOCL_PASTESEL: + return paste_selection(tty); + case TIOCL_UNBLANKSCREEN: + console_lock(); + unblank_screen(); + console_unlock(); + break; + case TIOCL_SELLOADLUT: + console_lock(); + ret = sel_loadlut(p); + console_unlock(); + break; + case TIOCL_GETSHIFTSTATE: + /* + * Make it possible to react to Shift+Mousebutton. Note that + * 'shift_state' is an undocumented kernel-internal variable; + * programs not closely related to the kernel should not use + * this. + */ + data = vt_get_shift_state(); + return put_user(data, p); + case TIOCL_GETMOUSEREPORTING: + console_lock(); /* May be overkill */ + data = mouse_reporting(); + console_unlock(); + return put_user(data, p); + case TIOCL_SETVESABLANK: + console_lock(); + ret = set_vesa_blanking(p); + console_unlock(); + break; + case TIOCL_GETKMSGREDIRECT: + data = vt_get_kmsg_redirect(); + return put_user(data, p); + case TIOCL_SETKMSGREDIRECT: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; - /* - * Make it possible to react to Shift+Mousebutton. - * Note that 'shift_state' is an undocumented - * kernel-internal variable; programs not closely - * related to the kernel should not use this. - */ - data = vt_get_shift_state(); - ret = put_user(data, p); - break; - case TIOCL_GETMOUSEREPORTING: - console_lock(); /* May be overkill */ - data = mouse_reporting(); - console_unlock(); - ret = put_user(data, p); - break; - case TIOCL_SETVESABLANK: - console_lock(); - ret = set_vesa_blanking(p); - console_unlock(); - break; - case TIOCL_GETKMSGREDIRECT: - data = vt_get_kmsg_redirect(); - ret = put_user(data, p); - break; - case TIOCL_SETKMSGREDIRECT: - if (!capable(CAP_SYS_ADMIN)) { - ret = -EPERM; - } else { - if (get_user(data, p+1)) - ret = -EFAULT; - else - vt_kmsg_redirect(data); - } - break; - case TIOCL_GETFGCONSOLE: - /* No locking needed as this is a transiently - correct return anyway if the caller hasn't - disabled switching */ - ret = fg_console; - break; - case TIOCL_SCROLLCONSOLE: - if (get_user(lines, (s32 __user *)(p+4))) { - ret = -EFAULT; - } else { - /* Need the console lock here. Note that lots - of other calls need fixing before the lock - is actually useful ! */ - console_lock(); - scrollfront(vc_cons[fg_console].d, lines); - console_unlock(); - ret = 0; - } - break; - case TIOCL_BLANKSCREEN: /* until explicitly unblanked, not only poked */ - console_lock(); - ignore_poke = 1; - do_blank_screen(0); - console_unlock(); - break; - case TIOCL_BLANKEDSCREEN: - ret = console_blanked; - break; - default: - ret = -EINVAL; - break; + if (get_user(data, p+1)) + return -EFAULT; + + vt_kmsg_redirect(data); + + break; + case TIOCL_GETFGCONSOLE: + /* + * No locking needed as this is a transiently correct return + * anyway if the caller hasn't disabled switching. + */ + return fg_console; + case TIOCL_SCROLLCONSOLE: + if (get_user(lines, (s32 __user *)(p+4))) + return -EFAULT; + + /* + * Needs the console lock here. Note that lots of other calls + * need fixing before the lock is actually useful! + */ + console_lock(); + scrollfront(vc_cons[fg_console].d, lines); + console_unlock(); + break; + case TIOCL_BLANKSCREEN: /* until explicitly unblanked, not only poked */ + console_lock(); + ignore_poke = 1; + do_blank_screen(0); + console_unlock(); + break; + case TIOCL_BLANKEDSCREEN: + return console_blanked; + default: + return -EINVAL; } + return ret; } @@ -3571,8 +3573,6 @@ int __init vty_init(const struct file_operations *console_fops) return 0; } -#ifndef VT_SINGLE_DRIVER - static struct class *vtconsole_class; static int do_bind_con_driver(const struct consw *csw, int first, int last, @@ -4236,6 +4236,7 @@ void give_up_console(const struct consw *csw) do_unregister_con_driver(csw); console_unlock(); } +EXPORT_SYMBOL(give_up_console); static int __init vtconsole_class_init(void) { @@ -4273,8 +4274,6 @@ static int __init vtconsole_class_init(void) } postcore_initcall(vtconsole_class_init); -#endif - /* * Screen blanking */ @@ -4792,23 +4791,3 @@ void vc_scrolldelta_helper(struct vc_data *c, int lines, c->vc_visible_origin = ubase + (from + from_off) % wrap; } EXPORT_SYMBOL_GPL(vc_scrolldelta_helper); - -/* - * Visible symbols for modules - */ - -EXPORT_SYMBOL(color_table); -EXPORT_SYMBOL(default_red); -EXPORT_SYMBOL(default_grn); -EXPORT_SYMBOL(default_blu); -EXPORT_SYMBOL(update_region); -EXPORT_SYMBOL(redraw_screen); -EXPORT_SYMBOL(vc_resize); -EXPORT_SYMBOL(fg_console); -EXPORT_SYMBOL(console_blank_hook); -EXPORT_SYMBOL(console_blanked); -EXPORT_SYMBOL(vc_cons); -EXPORT_SYMBOL(global_cursor_default); -#ifndef VT_SINGLE_DRIVER -EXPORT_SYMBOL(give_up_console); -#endif diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 19376bee9667..6f78f302d272 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -18,16 +18,16 @@ struct plat_serial8250_port { unsigned long iobase; /* io base address */ void __iomem *membase; /* ioremap cookie or NULL */ resource_size_t mapbase; /* resource base */ + unsigned int uartclk; /* UART clock rate */ unsigned int irq; /* interrupt number */ unsigned long irqflags; /* request_irq flags */ - unsigned int uartclk; /* UART clock rate */ void *private_data; unsigned char regshift; /* register shift */ unsigned char iotype; /* UPIO_* */ unsigned char hub6; unsigned char has_sysrq; /* supports magic SysRq */ - upf_t flags; /* UPF_* flags */ unsigned int type; /* If UPF_FIXED_TYPE */ + upf_t flags; /* UPF_* flags */ unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); void (*set_termios)(struct uart_port *, @@ -151,26 +151,22 @@ void serial8250_unregister_port(int line); void serial8250_suspend_port(int line); void serial8250_resume_port(int line); -extern int early_serial_setup(struct uart_port *port); - -extern int early_serial8250_setup(struct earlycon_device *device, - const char *options); -extern void serial8250_update_uartclk(struct uart_port *port, - unsigned int uartclk); -extern void serial8250_do_set_termios(struct uart_port *port, - struct ktermios *termios, const struct ktermios *old); -extern void serial8250_do_set_ldisc(struct uart_port *port, - struct ktermios *termios); -extern unsigned int serial8250_do_get_mctrl(struct uart_port *port); -extern int serial8250_do_startup(struct uart_port *port); -extern void serial8250_do_shutdown(struct uart_port *port); -extern void serial8250_do_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate); -extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); -extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, - unsigned int quot, - unsigned int quot_frac); -extern int fsl8250_handle_irq(struct uart_port *port); +int early_serial_setup(struct uart_port *port); +int early_serial8250_setup(struct earlycon_device *device, const char *options); + +void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk); +void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old); +void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios); +unsigned int serial8250_do_get_mctrl(struct uart_port *port); +int serial8250_do_startup(struct uart_port *port); +void serial8250_do_shutdown(struct uart_port *port); +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate); +void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); +void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac); +int fsl8250_handle_irq(struct uart_port *port); int serial8250_handle_irq(struct uart_port *port, unsigned int iir); u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr); void serial8250_read_char(struct uart_8250_port *up, u16 lsr); @@ -183,9 +179,8 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, int serial8250_console_setup(struct uart_port *port, char *options, bool probe); int serial8250_console_exit(struct uart_port *port); -extern void serial8250_set_isa_configurator(void (*v) - (int port, struct uart_port *up, - u32 *capabilities)); +void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up, + u32 *capabilities)); #ifdef CONFIG_SERIAL_8250_RT288X unsigned int au_serial_in(struct uart_port *p, int offset); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 9e3e5e0d11b2..66ecec15a1bf 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -553,7 +553,7 @@ struct uart_port { #define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4)) #define UPSTAT_SYNC_FIFO ((__force upstat_t) (1 << 5)) - int hw_stopped; /* sw-assisted CTS flow state */ + bool hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ unsigned int frame_time; /* frame timing in ns */ unsigned int type; /* port type */ @@ -812,9 +812,8 @@ extern const struct earlycon_id __earlycon_table_end[]; #define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn) -extern int of_setup_earlycon(const struct earlycon_id *match, - unsigned long node, - const char *options); +int of_setup_earlycon(const struct earlycon_id *match, unsigned long node, + const char *options); #ifdef CONFIG_SERIAL_EARLYCON extern bool earlycon_acpi_spcr_enable __initdata; @@ -897,11 +896,11 @@ static inline bool uart_softcts_mode(struct uart_port *uport) * The following are helper functions for the low level drivers. */ -extern void uart_handle_dcd_change(struct uart_port *uport, bool active); -extern void uart_handle_cts_change(struct uart_port *uport, bool active); +void uart_handle_dcd_change(struct uart_port *uport, bool active); +void uart_handle_cts_change(struct uart_port *uport, bool active); -extern void uart_insert_char(struct uart_port *port, unsigned int status, - unsigned int overrun, unsigned int ch, unsigned int flag); +void uart_insert_char(struct uart_port *port, unsigned int status, + unsigned int overrun, unsigned int ch, unsigned int flag); void uart_xchar_out(struct uart_port *uport, int offset); diff --git a/include/linux/tty.h b/include/linux/tty.h index 093935e97f42..60871a9d3212 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -227,7 +227,7 @@ struct tty_struct { unsigned long unused[0]; } __aligned(sizeof(unsigned long)) ctrl; - int hw_stopped; + bool hw_stopped; unsigned int receive_room; int flow_change; diff --git a/include/uapi/linux/gsmmux.h b/include/uapi/linux/gsmmux.h index a703780aa095..eb67884e5f38 100644 --- a/include/uapi/linux/gsmmux.h +++ b/include/uapi/linux/gsmmux.h @@ -43,10 +43,25 @@ struct gsm_config_ext { __u32 keep_alive; /* Control channel keep-alive in 1/100th of a * second (0 to disable) */ - __u32 reserved[7]; /* For future use, must be initialized to zero */ + __u32 wait_config; /* Wait for DLCI config before opening virtual link? */ + __u32 reserved[6]; /* For future use, must be initialized to zero */ }; #define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext) #define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext) +/* Set channel accordingly before calling GSMIOC_GETCONF_DLCI. */ +struct gsm_dlci_config { + __u32 channel; /* DLCI (0 for the associated DLCI) */ + __u32 adaption; /* Convergence layer type */ + __u32 mtu; /* Maximum transfer unit */ + __u32 priority; /* Priority (0 for default value) */ + __u32 i; /* Frame type (1 = UIH, 2 = UI) */ + __u32 k; /* Window size (0 for default value) */ + __u32 reserved[8]; /* For future use, must be initialized to zero */ +}; + +#define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config) +#define GSMIOC_SETCONF_DLCI _IOW('G', 8, struct gsm_dlci_config) + #endif |