diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-dell-laptop | 60 | ||||
| -rw-r--r-- | drivers/platform/x86/dell-laptop.c | 1055 |
2 files changed, 6 insertions, 1109 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop deleted file mode 100644 index 7969443ef0ef..000000000000 --- a/Documentation/ABI/testing/sysfs-platform-dell-laptop +++ /dev/null @@ -1,60 +0,0 @@ -What: /sys/class/leds/dell::kbd_backlight/als_setting -Date: December 2014 -KernelVersion: 3.19 -Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, - Pali Rohár <pali.rohar@gmail.com> -Description: - This file allows to control the automatic keyboard - illumination mode on some systems that have an ambient - light sensor. Write 1 to this file to enable the auto - mode, 0 to disable it. - -What: /sys/class/leds/dell::kbd_backlight/start_triggers -Date: December 2014 -KernelVersion: 3.19 -Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, - Pali Rohár <pali.rohar@gmail.com> -Description: - This file allows to control the input triggers that - turn on the keyboard backlight illumination that is - disabled because of inactivity. - Read the file to see the triggers available. The ones - enabled are preceded by '+', those disabled by '-'. - - To enable a trigger, write its name preceded by '+' to - this file. To disable a trigger, write its name preceded - by '-' instead. - - For example, to enable the keyboard as trigger run: - echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers - To disable it: - echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers - - Note that not all the available triggers can be configured. - -What: /sys/class/leds/dell::kbd_backlight/stop_timeout -Date: December 2014 -KernelVersion: 3.19 -Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, - Pali Rohár <pali.rohar@gmail.com> -Description: - This file allows to specify the interval after which the - keyboard illumination is disabled because of inactivity. - The timeouts are expressed in seconds, minutes, hours and - days, for which the symbols are 's', 'm', 'h' and 'd' - respectively. - - To configure the timeout, write to this file a value along - with any the above units. If no unit is specified, the value - is assumed to be expressed in seconds. - - For example, to set the timeout to 10 minutes run: - echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout - - Note that when this file is read, the returned value might be - expressed in a different unit than the one used when the timeout - was set. - - Also note that only some timeouts are supported and that - some systems might fall back to a specific timeout in case - an invalid timeout is written to this file. diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 9411eae39a4e..3d21efe11d7b 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -2,11 +2,9 @@ * Driver for Dell laptop extras * * Copyright (c) Red Hat <mjg@redhat.com> - * Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com> - * Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com> * - * Based on documentation in the libsmbios package: - * Copyright (C) 2005-2014 Dell Inc. + * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell + * Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -34,13 +32,6 @@ #include "../../firmware/dcdbas.h" #define BRIGHTNESS_TOKEN 0x7d -#define KBD_LED_OFF_TOKEN 0x01E1 -#define KBD_LED_ON_TOKEN 0x01E2 -#define KBD_LED_AUTO_TOKEN 0x01E3 -#define KBD_LED_AUTO_25_TOKEN 0x02EA -#define KBD_LED_AUTO_50_TOKEN 0x02EB -#define KBD_LED_AUTO_75_TOKEN 0x02EC -#define KBD_LED_AUTO_100_TOKEN 0x02F6 /* This structure will be modified by the firmware when we enter * system management mode, hence the volatiles */ @@ -71,13 +62,6 @@ struct calling_interface_structure { struct quirk_entry { u8 touchpad_led; - - int needs_kbd_timeouts; - /* - * Ordered list of timeouts expressed in seconds. - * The list must end with -1 - */ - int kbd_timeouts[]; }; static struct quirk_entry *quirks; @@ -92,15 +76,6 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) return 1; } -/* - * These values come from Windows utility provided by Dell. If any other value - * is used then BIOS silently set timeout to 0 without any error message. - */ -static struct quirk_entry quirk_dell_xps13_9333 = { - .needs_kbd_timeouts = 1, - .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 }, -}; - static int da_command_address; static int da_command_code; static int da_num_tokens; @@ -292,15 +267,6 @@ static const struct dmi_system_id dell_quirks[] __initconst = { }, .driver_data = &quirk_dell_vostro_v130, }, - { - .callback = dmi_matched, - .ident = "Dell XPS13 9333", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"), - }, - .driver_data = &quirk_dell_xps13_9333, - }, { } }; @@ -365,29 +331,17 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy) } } -static int find_token_id(int tokenid) +static int find_token_location(int tokenid) { int i; - for (i = 0; i < da_num_tokens; i++) { if (da_tokens[i].tokenID == tokenid) - return i; + return da_tokens[i].location; } return -1; } -static int find_token_location(int tokenid) -{ - int id; - - id = find_token_id(tokenid); - if (id == -1) - return -1; - - return da_tokens[id].location; -} - static struct calling_interface_buffer * dell_send_request(struct calling_interface_buffer *buffer, int class, int select) @@ -408,20 +362,6 @@ dell_send_request(struct calling_interface_buffer *buffer, int class, return buffer; } -static inline int dell_smi_error(int value) -{ - switch (value) { - case 0: /* Completed successfully */ - return 0; - case -1: /* Completed with error */ - return -EIO; - case -2: /* Function not supported */ - return -ENXIO; - default: /* Unknown error */ - return -EINVAL; - } -} - /* Derived from information in DellWirelessCtl.cpp: Class 17, select 11 is radio control. It returns an array of 32-bit values. @@ -776,7 +716,7 @@ static int dell_send_intensity(struct backlight_device *bd) else dell_send_request(buffer, 1, 1); - out: +out: release_buffer(); return ret; } @@ -800,7 +740,7 @@ static int dell_get_intensity(struct backlight_device *bd) ret = buffer->output[1]; - out: +out: release_buffer(); return ret; } @@ -849,984 +789,6 @@ static void touchpad_led_exit(void) led_classdev_unregister(&touchpad_led); } -/* - * Derived from information in smbios-keyboard-ctl: - * - * cbClass 4 - * cbSelect 11 - * Keyboard illumination - * cbArg1 determines the function to be performed - * - * cbArg1 0x0 = Get Feature Information - * cbRES1 Standard return codes (0, -1, -2) - * cbRES2, word0 Bitmap of user-selectable modes - * bit 0 Always off (All systems) - * bit 1 Always on (Travis ATG, Siberia) - * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG) - * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off - * bit 4 Auto: Input-activity-based On; input-activity based Off - * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off - * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off - * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off - * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off - * bits 9-15 Reserved for future use - * cbRES2, byte2 Reserved for future use - * cbRES2, byte3 Keyboard illumination type - * 0 Reserved - * 1 Tasklight - * 2 Backlight - * 3-255 Reserved for future use - * cbRES3, byte0 Supported auto keyboard illumination trigger bitmap. - * bit 0 Any keystroke - * bit 1 Touchpad activity - * bit 2 Pointing stick - * bit 3 Any mouse - * bits 4-7 Reserved for future use - * cbRES3, byte1 Supported timeout unit bitmap - * bit 0 Seconds - * bit 1 Minutes - * bit 2 Hours - * bit 3 Days - * bits 4-7 Reserved for future use - * cbRES3, byte2 Number of keyboard light brightness levels - * cbRES4, byte0 Maximum acceptable seconds value (0 if seconds not supported). - * cbRES4, byte1 Maximum acceptable minutes value (0 if minutes not supported). - * cbRES4, byte2 Maximum acceptable hours value (0 if hours not supported). - * cbRES4, byte3 Maximum acceptable days value (0 if days not supported) - * - * cbArg1 0x1 = Get Current State - * cbRES1 Standard return codes (0, -1, -2) - * cbRES2, word0 Bitmap of current mode state - * bit 0 Always off (All systems) - * bit 1 Always on (Travis ATG, Siberia) - * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG) - * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off - * bit 4 Auto: Input-activity-based On; input-activity based Off - * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off - * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off - * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off - * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off - * bits 9-15 Reserved for future use - * Note: Only One bit can be set - * cbRES2, byte2 Currently active auto keyboard illumination triggers. - * bit 0 Any keystroke - * bit 1 Touchpad activity - * bit 2 Pointing stick - * bit 3 Any mouse - * bits 4-7 Reserved for future use - * cbRES2, byte3 Current Timeout - * bits 7:6 Timeout units indicator: - * 00b Seconds - * 01b Minutes - * 10b Hours - * 11b Days - * bits 5:0 Timeout value (0-63) in sec/min/hr/day - * NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte - * are set upon return from the [Get feature information] call. - * cbRES3, byte0 Current setting of ALS value that turns the light on or off. - * cbRES3, byte1 Current ALS reading - * cbRES3, byte2 Current keyboard light level. - * - * cbArg1 0x2 = Set New State - * cbRES1 Standard return codes (0, -1, -2) - * cbArg2, word0 Bitmap of current mode state - * bit 0 Always off (All systems) - * bit 1 Always on (Travis ATG, Siberia) - * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG) - * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off - * bit 4 Auto: Input-activity-based On; input-activity based Off - * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off - * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off - * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off - * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off - * bits 9-15 Reserved for future use - * Note: Only One bit can be set - * cbArg2, byte2 Desired auto keyboard illumination triggers. Must remain inactive to allow - * keyboard to turn off automatically. - * bit 0 Any keystroke - * bit 1 Touchpad activity - * bit 2 Pointing stick - * bit 3 Any mouse - * bits 4-7 Reserved for future use - * cbArg2, byte3 Desired Timeout - * bits 7:6 Timeout units indicator: - * 00b Seconds - * 01b Minutes - * 10b Hours - * 11b Days - * bits 5:0 Timeout value (0-63) in sec/min/hr/day - * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. - * cbArg3, byte2 Desired keyboard light level. - */ - - -enum kbd_timeout_unit { - KBD_TIMEOUT_SECONDS = 0, - KBD_TIMEOUT_MINUTES, - KBD_TIMEOUT_HOURS, - KBD_TIMEOUT_DAYS, -}; - -enum kbd_mode_bit { - KBD_MODE_BIT_OFF = 0, - KBD_MODE_BIT_ON, - KBD_MODE_BIT_ALS, - KBD_MODE_BIT_TRIGGER_ALS, - KBD_MODE_BIT_TRIGGER, - KBD_MODE_BIT_TRIGGER_25, - KBD_MODE_BIT_TRIGGER_50, - KBD_MODE_BIT_TRIGGER_75, - KBD_MODE_BIT_TRIGGER_100, -}; - -#define kbd_is_als_mode_bit(bit) \ - ((bit) == KBD_MODE_BIT_ALS || (bit) == KBD_MODE_BIT_TRIGGER_ALS) -#define kbd_is_trigger_mode_bit(bit) \ - ((bit) >= KBD_MODE_BIT_TRIGGER_ALS && (bit) <= KBD_MODE_BIT_TRIGGER_100) -#define kbd_is_level_mode_bit(bit) \ - ((bit) >= KBD_MODE_BIT_TRIGGER_25 && (bit) <= KBD_MODE_BIT_TRIGGER_100) - -struct kbd_info { - u16 modes; - u8 type; - u8 triggers; - u8 levels; - u8 seconds; - u8 minutes; - u8 hours; - u8 days; -}; - -struct kbd_state { - u8 mode_bit; - u8 triggers; - u8 timeout_value; - u8 timeout_unit; - u8 als_setting; - u8 als_value; - u8 level; -}; - -static const int kbd_tokens[] = { - KBD_LED_OFF_TOKEN, - KBD_LED_AUTO_25_TOKEN, - KBD_LED_AUTO_50_TOKEN, - KBD_LED_AUTO_75_TOKEN, - KBD_LED_AUTO_100_TOKEN, - KBD_LED_ON_TOKEN, -}; - -static u16 kbd_token_bits; - -static struct kbd_info kbd_info; -static bool kbd_als_supported; -static bool kbd_triggers_supported; - -static u8 kbd_mode_levels[16]; -static int kbd_mode_levels_count; - -static u8 kbd_previous_level; -static u8 kbd_previous_mode_bit; - -static bool kbd_led_present; - -/* - * NOTE: there are three ways to set the keyboard backlight level. - * First, via kbd_state.mode_bit (assigning KBD_MODE_BIT_TRIGGER_* value). - * Second, via kbd_state.level (assigning numerical value <= kbd_info.levels). - * Third, via SMBIOS tokens (KBD_LED_* in kbd_tokens) - * - * There are laptops which support only one of these methods. If we want to - * support as many machines as possible we need to implement all three methods. - * The first two methods use the kbd_state structure. The third uses SMBIOS - * tokens. If kbd_info.levels == 0, the machine does not support setting the - * keyboard backlight level via kbd_state.level. - */ - -static int kbd_get_info(struct kbd_info *info) -{ - u8 units; - int ret; - - get_buffer(); - - buffer->input[0] = 0x0; - dell_send_request(buffer, 4, 11); - ret = buffer->output[0]; - - if (ret) { - ret = dell_smi_error(ret); - goto out; - } - - info->modes = buffer->output[1] & 0xFFFF; - info->type = (buffer->output[1] >> 24) & 0xFF; - info->triggers = buffer->output[2] & 0xFF; - units = (buffer->output[2] >> 8) & 0xFF; - info->levels = (buffer->output[2] >> 16) & 0xFF; - - if (units & BIT(0)) - info->seconds = (buffer->output[3] >> 0) & 0xFF; - if (units & BIT(1)) - info->minutes = (buffer->output[3] >> 8) & 0xFF; - if (units & BIT(2)) - info->hours = (buffer->output[3] >> 16) & 0xFF; - if (units & BIT(3)) - info->days = (buffer->output[3] >> 24) & 0xFF; - - out: - release_buffer(); - return ret; -} - -static unsigned int kbd_get_max_level(void) -{ - if (kbd_info.levels != 0) - return kbd_info.levels; - if (kbd_mode_levels_count > 0) - return kbd_mode_levels_count - 1; - return 0; -} - -static int kbd_get_level(struct kbd_state *state) -{ - int i; - - if (kbd_info.levels != 0) - return state->level; - - if (kbd_mode_levels_count > 0) { - for (i = 0; i < kbd_mode_levels_count; ++i) - if (kbd_mode_levels[i] == state->mode_bit) - return i; - return 0; - } - - return -EINVAL; -} - -static int kbd_set_level(struct kbd_state *state, u8 level) -{ - if (kbd_info.levels != 0) { - if (level != 0) - kbd_previous_level = level; - if (state->level == level) - return 0; - state->level = level; - if (level != 0 && state->mode_bit == KBD_MODE_BIT_OFF) - state->mode_bit = kbd_previous_mode_bit; - else if (level == 0 && state->mode_bit != KBD_MODE_BIT_OFF) { - kbd_previous_mode_bit = state->mode_bit; - state->mode_bit = KBD_MODE_BIT_OFF; - } - return 0; - } - - if (kbd_mode_levels_count > 0 && level < kbd_mode_levels_count) { - if (level != 0) - kbd_previous_level = level; - state->mode_bit = kbd_mode_levels[level]; - return 0; - } - - return -EINVAL; -} - -static int kbd_get_state(struct kbd_state *state) -{ - int ret; - - get_buffer(); - - buffer->input[0] = 0x1; - dell_send_request(buffer, 4, 11); - ret = buffer->output[0]; - - if (ret) { - ret = dell_smi_error(ret); - goto out; - } - - state->mode_bit = ffs(buffer->output[1] & 0xFFFF); - if (state->mode_bit != 0) - state->mode_bit--; - - state->triggers = (buffer->output[1] >> 16) & 0xFF; - state->timeout_value = (buffer->output[1] >> 24) & 0x3F; - state->timeout_unit = (buffer->output[1] >> 30) & 0x3; - state->als_setting = buffer->output[2] & 0xFF; - state->als_value = (buffer->output[2] >> 8) & 0xFF; - state->level = (buffer->output[2] >> 16) & 0xFF; - - out: - release_buffer(); - return ret; -} - -static int kbd_set_state(struct kbd_state *state) -{ - int ret; - - get_buffer(); - buffer->input[0] = 0x2; - buffer->input[1] = BIT(state->mode_bit) & 0xFFFF; - buffer->input[1] |= (state->triggers & 0xFF) << 16; - buffer->input[1] |= (state->timeout_value & 0x3F) << 24; - buffer->input[1] |= (state->timeout_unit & 0x3) << 30; - buffer->input[2] = state->als_setting & 0xFF; - buffer->input[2] |= (state->level & 0xFF) << 16; - dell_send_request(buffer, 4, 11); - ret = buffer->output[0]; - release_buffer(); - - return dell_smi_error(ret); -} - -static int kbd_set_state_safe(struct kbd_state *state, struct kbd_state *old) -{ - int ret; - - ret = kbd_set_state(state); - if (ret == 0) - return 0; - - /* - * When setting the new state fails,try to restore the previous one. - * This is needed on some machines where BIOS sets a default state when - * setting a new state fails. This default state could be all off. - */ - - if (kbd_set_state(old)) - pr_err("Setting old previous keyboard state failed\n"); - - return ret; -} - -static int kbd_set_token_bit(u8 bit) -{ - int id; - int ret; - - if (bit >= ARRAY_SIZE(kbd_tokens)) - return -EINVAL; - - id = find_token_id(kbd_tokens[bit]); - if (id == -1) - return -EINVAL; - - get_buffer(); - buffer->input[0] = da_tokens[id].location; - buffer->input[1] = da_tokens[id].value; - dell_send_request(buffer, 1, 0); - ret = buffer->output[0]; - release_buffer(); - - return dell_smi_error(ret); -} - -static int kbd_get_token_bit(u8 bit) -{ - int id; - int ret; - int val; - - if (bit >= ARRAY_SIZE(kbd_tokens)) - return -EINVAL; - - id = find_token_id(kbd_tokens[bit]); - if (id == -1) - return -EINVAL; - - get_buffer(); - buffer->input[0] = da_tokens[id].location; - dell_send_request(buffer, 0, 0); - ret = buffer->output[0]; - val = buffer->output[1]; - release_buffer(); - - if (ret) - return dell_smi_error(ret); - - return (val == da_tokens[id].value); -} - -static int kbd_get_first_active_token_bit(void) -{ - int i; - int ret; - - for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i) { - ret = kbd_get_token_bit(i); - if (ret == 1) - return i; - } - - return ret; -} - -static int kbd_get_valid_token_counts(void) -{ - return hweight16(kbd_token_bits); -} - -static inline int kbd_init_info(void) -{ - struct kbd_state state; - int ret; - int i; - - ret = kbd_get_info(&kbd_info); - if (ret) - return ret; - - kbd_get_state(&state); - - /* NOTE: timeout value is stored in 6 bits so max value is 63 */ - if (kbd_info.seconds > 63) - kbd_info.seconds = 63; - if (kbd_info.minutes > 63) - kbd_info.minutes = 63; - if (kbd_info.hours > 63) - kbd_info.hours = 63; - if (kbd_info.days > 63) - kbd_info.days = 63; - - /* NOTE: On tested machines ON mode did not work and caused - * problems (turned backlight off) so do not use it - */ - kbd_info.modes &= ~BIT(KBD_MODE_BIT_ON); - - kbd_previous_level = kbd_get_level(&state); - kbd_previous_mode_bit = state.mode_bit; - - if (kbd_previous_level == 0 && kbd_get_max_level() != 0) - kbd_previous_level = 1; - - if (kbd_previous_mode_bit == KBD_MODE_BIT_OFF) { - kbd_previous_mode_bit = - ffs(kbd_info.modes & ~BIT(KBD_MODE_BIT_OFF)); - if (kbd_previous_mode_bit != 0) - kbd_previous_mode_bit--; - } - - if (kbd_info.modes & (BIT(KBD_MODE_BIT_ALS) | - BIT(KBD_MODE_BIT_TRIGGER_ALS))) - kbd_als_supported = true; - - if (kbd_info.modes & ( - BIT(KBD_MODE_BIT_TRIGGER_ALS) | BIT(KBD_MODE_BIT_TRIGGER) | - BIT(KBD_MODE_BIT_TRIGGER_25) | BIT(KBD_MODE_BIT_TRIGGER_50) | - BIT(KBD_MODE_BIT_TRIGGER_75) | BIT(KBD_MODE_BIT_TRIGGER_100) - )) - kbd_triggers_supported = true; - - /* kbd_mode_levels[0] is reserved, see below */ - for (i = 0; i < 16; ++i) - if (kbd_is_level_mode_bit(i) && (BIT(i) & kbd_info.modes)) - kbd_mode_levels[1 + kbd_mode_levels_count++] = i; - - /* - * Find the first supported mode and assign to kbd_mode_levels[0]. - * This should be 0 (off), but we cannot depend on the BIOS to - * support 0. - */ - if (kbd_mode_levels_count > 0) { - for (i = 0; i < 16; ++i) { - if (BIT(i) & kbd_info.modes) { - kbd_mode_levels[0] = i; - break; - } - } - kbd_mode_levels_count++; - } - - return 0; - -} - -static inline void kbd_init_tokens(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i) - if (find_token_id(kbd_tokens[i]) != -1) - kbd_token_bits |= BIT(i); -} - -static void kbd_init(void) -{ - int ret; - - ret = kbd_init_info(); - kbd_init_tokens(); - - if (kbd_token_bits != 0 || ret == 0) - kbd_led_present = true; -} - -static ssize_t kbd_led_timeout_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct kbd_state new_state; - struct kbd_state state; - bool convert; - int value; - int ret; - char ch; - u8 unit; - int i; - - ret = sscanf(buf, "%d %c", &value, &ch); - if (ret < 1) - return -EINVAL; - else if (ret == 1) - ch = 's'; - - if (value < 0) - return -EINVAL; - - convert = false; - - switch (ch) { - case 's': - if (value > kbd_info.seconds) - convert = true; - unit = KBD_TIMEOUT_SECONDS; - break; - case 'm': - if (value > kbd_info.minutes) - convert = true; - unit = KBD_TIMEOUT_MINUTES; - break; - case 'h': - if (value > kbd_info.hours) - convert = true; - unit = KBD_TIMEOUT_HOURS; - break; - case 'd': - if (value > kbd_info.days) - convert = true; - unit = KBD_TIMEOUT_DAYS; - break; - default: - return -EINVAL; - } - - if (quirks && quirks->needs_kbd_timeouts) - convert = true; - - if (convert) { - /* Convert value from current units to seconds */ - switch (unit) { - case KBD_TIMEOUT_DAYS: - value *= 24; - case KBD_TIMEOUT_HOURS: - value *= 60; - case KBD_TIMEOUT_MINUTES: - value *= 60; - unit = KBD_TIMEOUT_SECONDS; - } - - if (quirks && quirks->needs_kbd_timeouts) { - for (i = 0; quirks->kbd_timeouts[i] != -1; i++) { - if (value <= quirks->kbd_timeouts[i]) { - value = quirks->kbd_timeouts[i]; - break; - } - } - } - - if (value <= kbd_info.seconds && kbd_info.seconds) { - unit = KBD_TIMEOUT_SECONDS; - } else if (value / 60 <= kbd_info.minutes && kbd_info.minutes) { - value /= 60; - unit = KBD_TIMEOUT_MINUTES; - } else if (value / (60 * 60) <= kbd_info.hours && kbd_info.hours) { - value /= (60 * 60); - unit = KBD_TIMEOUT_HOURS; - } else if (value / (60 * 60 * 24) <= kbd_info.days && kbd_info.days) { - value /= (60 * 60 * 24); - unit = KBD_TIMEOUT_DAYS; - } else { - return -EINVAL; - } - } - - ret = kbd_get_state(&state); - if (ret) - return ret; - - new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; - - ret = kbd_set_state_safe(&new_state, &state); - if (ret) - return ret; - - return count; -} - -static ssize_t kbd_led_timeout_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct kbd_state state; - int ret; - int len; - - ret = kbd_get_state(&state); - if (ret) - return ret; - - len = sprintf(buf, "%d", state.timeout_value); - - switch (state.timeout_unit) { - case KBD_TIMEOUT_SECONDS: - return len + sprintf(buf+len, "s\n"); - case KBD_TIMEOUT_MINUTES: - return len + sprintf(buf+len, "m\n"); - case KBD_TIMEOUT_HOURS: - return len + sprintf(buf+len, "h\n"); - case KBD_TIMEOUT_DAYS: - return len + sprintf(buf+len, "d\n"); - default: - return -EINVAL; - } - - return len; -} - -static DEVICE_ATTR(stop_timeout, S_IRUGO | S_IWUSR, - kbd_led_timeout_show, kbd_led_timeout_store); - -static const char * const kbd_led_triggers[] = { - "keyboard", - "touchpad", - /*"trackstick"*/ NULL, /* NOTE: trackstick is just alias for touchpad */ - "mouse", -}; - -static ssize_t kbd_led_triggers_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct kbd_state new_state; - struct kbd_state state; - bool triggers_enabled = false; - bool als_enabled = false; - bool disable_als = false; - bool enable_als = false; - int trigger_bit = -1; - char trigger[21]; - int i, ret; - - ret = sscanf(buf, "%20s", trigger); - if (ret != 1) - return -EINVAL; - - if (trigger[0] != '+' && trigger[0] != '-') - return -EINVAL; - - ret = kbd_get_state(&state); - if (ret) - return ret; - - if (kbd_als_supported) - als_enabled = kbd_is_als_mode_bit(state.mode_bit); - - if (kbd_triggers_supported) - triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit); - - if (kbd_als_supported) { - if (strcmp(trigger, "+als") == 0) { - if (als_enabled) - return count; - enable_als = true; - } else if (strcmp(trigger, "-als") == 0) { - if (!als_enabled) - return count; - disable_als = true; - } - } - - if (enable_als || disable_als) { - new_state = state; - if (enable_als) { - if (triggers_enabled) - new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS; - else - new_state.mode_bit = KBD_MODE_BIT_ALS; - } else { - if (triggers_enabled) { - new_state.mode_bit = KBD_MODE_BIT_TRIGGER; - kbd_set_level(&new_state, kbd_previous_level); - } else { - new_state.mode_bit = KBD_MODE_BIT_ON; - } - } - if (!(kbd_info.modes & BIT(new_state.mode_bit))) - return -EINVAL; - ret = kbd_set_state_safe(&new_state, &state); - if (ret) - return ret; - kbd_previous_mode_bit = new_state.mode_bit; - return count; - } - - if (kbd_triggers_supported) { - for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) { - if (!(kbd_info.triggers & BIT(i))) - continue; - if (!kbd_led_triggers[i]) - continue; - if (strcmp(trigger+1, kbd_led_triggers[i]) != 0) - continue; - if (trigger[0] == '+' && - triggers_enabled && (state.triggers & BIT(i))) - return count; - if (trigger[0] == '-' && - (!triggers_enabled || !(state.triggers & BIT(i)))) - return count; - trigger_bit = i; - break; - } - } - - if (trigger_bit != -1) { - new_state = state; - if (trigger[0] == '+') - new_state.triggers |= BIT(trigger_bit); - else { - new_state.triggers &= ~BIT(trigger_bit); - /* NOTE: trackstick bit (2) must be disabled when - * disabling touchpad bit (1), otherwise touchpad - * bit (1) will not be disabled */ - if (trigger_bit == 1) - new_state.triggers &= ~BIT(2); - } - if ((kbd_info.triggers & new_state.triggers) != - new_state.triggers) - return -EINVAL; - if (new_state.triggers && !triggers_enabled) { - if (als_enabled) - new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS; - else { - new_state.mode_bit = KBD_MODE_BIT_TRIGGER; - kbd_set_level(&new_state, kbd_previous_level); - } - } else if (new_state.triggers == 0) { - if (als_enabled) - new_state.mode_bit = KBD_MODE_BIT_ALS; - else - kbd_set_level(&new_state, 0); - } - if (!(kbd_info.modes & BIT(new_state.mode_bit))) - return -EINVAL; - ret = kbd_set_state_safe(&new_state, &state); - if (ret) - return ret; - if (new_state.mode_bit != KBD_MODE_BIT_OFF) - kbd_previous_mode_bit = new_state.mode_bit; - return count; - } - - return -EINVAL; -} - -static ssize_t kbd_led_triggers_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct kbd_state state; - bool triggers_enabled; - int level, i, ret; - int len = 0; - - ret = kbd_get_state(&state); - if (ret) - return ret; - - len = 0; - - if (kbd_triggers_supported) { - triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit); - level = kbd_get_level(&state); - for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) { - if (!(kbd_info.triggers & BIT(i))) - continue; - if (!kbd_led_triggers[i]) - continue; - if ((triggers_enabled || level <= 0) && - (state.triggers & BIT(i))) - buf[len++] = '+'; - else - buf[len++] = '-'; - len += sprintf(buf+len, "%s ", kbd_led_triggers[i]); - } - } - - if (kbd_als_supported) { - if (kbd_is_als_mode_bit(state.mode_bit)) - len += sprintf(buf+len, "+als "); - else - len += sprintf(buf+len, "-als "); - } - - if (len) - buf[len - 1] = '\n'; - - return len; -} - -static DEVICE_ATTR(start_triggers, S_IRUGO | S_IWUSR, - kbd_led_triggers_show, kbd_led_triggers_store); - -static ssize_t kbd_led_als_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct kbd_state state; - struct kbd_state new_state; - u8 setting; - int ret; - - ret = kstrtou8(buf, 10, &setting); - if (ret) - return ret; - - ret = kbd_get_state(&state); - if (ret) - return ret; - - new_state = state; - new_state.als_setting = setting; - - ret = kbd_set_state_safe(&new_state, &state); - if (ret) - return ret; - - return count; -} - -static ssize_t kbd_led_als_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct kbd_state state; - int ret; - - ret = kbd_get_state(&state); - if (ret) - return ret; - - return sprintf(buf, "%d\n", state.als_setting); -} - -static DEVICE_ATTR(als_setting, S_IRUGO | S_IWUSR, - kbd_led_als_show, kbd_led_als_store); - -static struct attribute *kbd_led_attrs[] = { - &dev_attr_stop_timeout.attr, - &dev_attr_start_triggers.attr, - &dev_attr_als_setting.attr, - NULL, -}; -ATTRIBUTE_GROUPS(kbd_led); - -static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev) -{ - int ret; - u16 num; - struct kbd_state state; - - if (kbd_get_max_level()) { - ret = kbd_get_state(&state); - if (ret) - return 0; - ret = kbd_get_level(&state); - if (ret < 0) - return 0; - return ret; - } - - if (kbd_get_valid_token_counts()) { - ret = kbd_get_first_active_token_bit(); - if (ret < 0) - return 0; - for (num = kbd_token_bits; num != 0 && ret > 0; --ret) - num &= num - 1; /* clear the first bit set */ - if (num == 0) - return 0; - return ffs(num) - 1; - } - - pr_warn("Keyboard brightness level control not supported\n"); - return 0; -} - -static void kbd_led_level_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct kbd_state state; - struct kbd_state new_state; - u16 num; - - if (kbd_get_max_level()) { - if (kbd_get_state(&state)) - return; - new_state = state; - if (kbd_set_level(&new_state, value)) - return; - kbd_set_state_safe(&new_state, &state); - return; - } - - if (kbd_get_valid_token_counts()) { - for (num = kbd_token_bits; num != 0 && value > 0; --value) - num &= num - 1; /* clear the first bit set */ - if (num == 0) - return; - kbd_set_token_bit(ffs(num) - 1); - return; - } - - pr_warn("Keyboard brightness level control not supported\n"); -} - -static struct led_classdev kbd_led = { - .name = "dell::kbd_backlight", - .brightness_set = kbd_led_level_set, - .brightness_get = kbd_led_level_get, - .groups = kbd_led_groups, -}; - -static int __init kbd_led_init(struct device *dev) -{ - kbd_init(); - if (!kbd_led_present) - return -ENODEV; - kbd_led.max_brightness = kbd_get_max_level(); - if (!kbd_led.max_brightness) { - kbd_led.max_brightness = kbd_get_valid_token_counts(); - if (kbd_led.max_brightness) - kbd_led.max_brightness--; - } - return led_classdev_register(dev, &kbd_led); -} - -static void brightness_set_exit(struct led_classdev *led_cdev, - enum led_brightness value) -{ - /* Don't change backlight level on exit */ -}; - -static void kbd_led_exit(void) -{ - if (!kbd_led_present) - return; - kbd_led.brightness_set = brightness_set_exit; - led_classdev_unregister(&kbd_led); -} - static int __init dell_init(void) { int max_intensity = 0; @@ -1879,8 +841,6 @@ static int __init dell_init(void) if (quirks && quirks->touchpad_led) touchpad_led_init(&platform_device->dev); - kbd_led_init(&platform_device->dev); - dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL); if (dell_laptop_dir != NULL) debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL, @@ -1948,7 +908,6 @@ static void __exit dell_exit(void) debugfs_remove_recursive(dell_laptop_dir); if (quirks && quirks->touchpad_led) touchpad_led_exit(); - kbd_led_exit(); i8042_remove_filter(dell_laptop_i8042_filter); cancel_delayed_work_sync(&dell_rfkill_work); backlight_device_unregister(dell_backlight_device); @@ -1965,7 +924,5 @@ module_init(dell_init); module_exit(dell_exit); MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>"); -MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>"); -MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>"); MODULE_DESCRIPTION("Dell laptop driver"); MODULE_LICENSE("GPL"); |