diff options
67 files changed, 3302 insertions, 1351 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4b1a8e3d292c..9d8b7f9bca1d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -33,6 +33,11 @@ config GENERIC_CLOCKEVENTS bool default n +config GENERIC_CLOCKEVENTS_BROADCAST + bool + depends on GENERIC_CLOCKEVENTS + default y if SMP && !LOCAL_TIMERS + config MMU bool default y @@ -168,6 +173,8 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select ICST307 + select GENERIC_TIME + select GENERIC_CLOCKEVENTS help This enables support for ARM Ltd RealView boards. @@ -604,7 +611,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && REALVIEW_MPCORE + depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -638,7 +645,7 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && REALVIEW_MPCORE + depends on SMP && REALVIEW_EB_ARM11MP default y help Enable support for local timers on SMP platforms, rather then the @@ -894,6 +901,13 @@ config KEXEC initially work for you. It may help to enable device hotplugging support. +config ATAGS_PROC + bool "Export atags in procfs" + default n + help + Should the atags used to boot the kernel be exported in an "atags" + file in procfs. Useful with kexec. + endmenu if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c index 34038eccbba9..d544da414731 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/common/time-acorn.c @@ -69,9 +69,7 @@ void __init ioctime_init(void) static irqreturn_t ioc_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index db850a5689eb..efa0485d2f7e 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1,69 +1,96 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Tue Jan 3 03:20:40 2006 +# Linux kernel version: 2.6.24 +# Sun Jan 27 07:33:38 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -81,28 +108,39 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +CONFIG_ARCH_IXP4XX=y # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -112,8 +150,12 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # # IXP4xx Platforms # -CONFIG_ARCH_AVILA=y +CONFIG_MACH_NSLU2=y +CONFIG_MACH_AVILA=y +CONFIG_MACH_LOFT=y CONFIG_ARCH_ADI_COYOTE=y +CONFIG_MACH_GATEWAY7001=y +CONFIG_MACH_WG302V2=y CONFIG_ARCH_IXDP425=y CONFIG_MACH_IXDPG425=y CONFIG_MACH_IXDP465=y @@ -121,15 +163,27 @@ CONFIG_MACH_KIXRP435=y CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_MACH_NAS100D=y +CONFIG_MACH_DSMG600=y CONFIG_ARCH_IXDP4XX=y CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y -# CONFIG_MACH_GTWX5715 is not set +CONFIG_MACH_GTWX5715=y # # IXP4xx Options # +CONFIG_DMABOUNCE=y # CONFIG_IXP4XX_INDIRECT_PCI is not set +CONFIG_IXP4XX_QMGR=y +CONFIG_IXP4XX_NPE=y + +# +# Boot options +# + +# +# Power management +# # # Processor Type @@ -140,33 +194,40 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_THUMB is not set CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y -CONFIG_DMABOUNCE=y # # Bus support # -CONFIG_ISA_DMA_API=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -175,7 +236,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -185,6 +251,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -203,13 +270,12 @@ CONFIG_FPE_NWFPE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -219,11 +285,13 @@ CONFIG_NET=y # # Networking options # -CONFIG_PACKET=m +CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -232,9 +300,7 @@ CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -251,15 +317,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IP_VS=m CONFIG_IP_VS_DEBUG=y CONFIG_IP_VS_TAB_BITS=12 @@ -290,6 +359,9 @@ CONFIG_IP_VS_SH=m # IPVS application helper # # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y @@ -298,70 +370,57 @@ CONFIG_BRIDGE_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m # CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m # CONFIG_IP_NF_MATCH_RECENT is not set # CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=m -# CONFIG_IP_NF_MATCH_CONNTRACK is not set CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_PHYSDEV is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_DCCP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m # CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=m -# CONFIG_IP_NF_TARGET_CLASSIFY is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set CONFIG_IP_NF_ARPTABLES=m @@ -372,16 +431,9 @@ CONFIG_IP_NF_ARPFILTER=m # Bridge: Netfilter Configuration # # CONFIG_BRIDGE_NF_EBTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set @@ -397,25 +449,17 @@ CONFIG_LLC=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y +CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_X25=m CONFIG_LAPB=m -# CONFIG_NET_DIVERT is not set CONFIG_ECONET=m CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y CONFIG_WAN_ROUTER=m - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -425,6 +469,7 @@ CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_ATM is not set CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -449,10 +494,17 @@ CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set -CONFIG_NET_ESTIMATOR=y +CONFIG_NET_SCH_FIFO=y # # Network testing @@ -461,7 +513,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -470,19 +533,14 @@ CONFIG_NET_PKTGEN=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -498,11 +556,14 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -528,7 +589,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access @@ -538,6 +598,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP4XX=y # CONFIG_MTD_PCI is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -547,7 +608,6 @@ CONFIG_MTD_IXP4XX=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -556,33 +616,24 @@ CONFIG_MTD_IXP4XX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -592,17 +643,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -614,24 +668,28 @@ CONFIG_BLK_DEV_IDEDISK=y # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set @@ -639,93 +697,163 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +CONFIG_PATA_ARTOP=y +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_IXP4XX_CF=y # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_IXP4XX_ETH=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set CONFIG_EEPRO100=y # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -738,93 +866,76 @@ CONFIG_EEPRO100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_AIRO is not set -CONFIG_HERMES=y -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -CONFIG_PCI_HERMES=y -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# Wireless LAN # -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set CONFIG_WAN=y -# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=m -CONFIG_HDLC_RAW=y +CONFIG_HDLC_RAW=m # CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y -CONFIG_HDLC_X25=y +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m +CONFIG_HDLC_X25=m # CONFIG_PCI200SYN is not set # CONFIG_WANXL is not set # CONFIG_PC300 is not set +# CONFIG_PC300TOO is not set # CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set +# CONFIG_IXP4XX_HSS is not set CONFIG_DLCI=m -CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 -CONFIG_WAN_ROUTER_DRIVERS=y +CONFIG_WAN_ROUTER_DRIVERS=m # CONFIG_CYCLADES_SYNC is not set # CONFIG_LAPBETHER is not set # CONFIG_X25_ASY is not set - -# -# ATM drivers -# +CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set CONFIG_ATM_TCP=m # CONFIG_ATM_LANAI is not set @@ -842,20 +953,19 @@ CONFIG_ATM_TCP=m # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -865,7 +975,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -875,8 +984,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_IXP4XX_BEEPER=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports @@ -895,7 +1012,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -907,51 +1026,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_IXP4XX=m # CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -969,57 +1054,68 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IOP3XX is not set CONFIG_I2C_IXP4XX=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # -# Hardware Monitoring support +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1033,67 +1129,268 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# Misc devices +# Watchdog Device Drivers # +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y # -# Multimedia Capabilities Port drivers +# PCI-based Watchdog Cards # +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # -# Multimedia devices +# USB-based Watchdog Cards # -# CONFIG_VIDEO_DEV is not set +# CONFIG_USBPCWATCHDOG is not set # -# Digital Video Broadcasting Devices +# Sonics Silicon Backplane # -# CONFIG_DVB is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# +# CONFIG_USB_ATM is not set + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# MMC/SD Card support +# LED drivers +# +# CONFIG_LEDS_IXP4XX is not set +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +CONFIG_RTC_DRV_X1205=y +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers # -# CONFIG_MMC is not set # # File systems @@ -1107,16 +1404,19 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1140,11 +1440,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1156,13 +1457,15 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1171,10 +1474,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1186,6 +1486,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1193,7 +1494,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1213,37 +1513,53 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_USER is not set CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y @@ -1254,22 +1570,22 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index faa761921153..00d44c6fbfe9 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o +obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c new file mode 100644 index 000000000000..e2e934c38080 --- /dev/null +++ b/arch/arm/kernel/atags.c @@ -0,0 +1,86 @@ +#include <linux/slab.h> +#include <linux/kexec.h> +#include <linux/proc_fs.h> +#include <asm/setup.h> +#include <asm/types.h> +#include <asm/page.h> + +struct buffer { + size_t size; + char *data; +}; +static struct buffer tags_buffer; + +static int +read_buffer(char* page, char** start, off_t off, int count, + int* eof, void* data) +{ + struct buffer *buffer = (struct buffer *)data; + + if (off >= buffer->size) { + *eof = 1; + return 0; + } + + count = min((int) (buffer->size - off), count); + + memcpy(page, &buffer->data[off], count); + + return count; +} + + +static int +create_proc_entries(void) +{ + struct proc_dir_entry* tags_entry; + + tags_entry = create_proc_read_entry("atags", 0400, &proc_root, read_buffer, &tags_buffer); + if (!tags_entry) + return -ENOMEM; + + return 0; +} + + +static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE]; +static char __initdata *atags_copy; + +void __init save_atags(const struct tag *tags) +{ + atags_copy = atags_copy_buf; + memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE); +} + + +static int __init init_atags_procfs(void) +{ + struct tag *tag; + int error; + + if (!atags_copy) { + printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n"); + return -EIO; + } + + for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag)) + ; + + tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr); + tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL); + if (tags_buffer.data == NULL) + return -ENOMEM; + memcpy(tags_buffer.data, atags_copy, tags_buffer.size); + + error = create_proc_entries(); + if (error) { + printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); + kfree(tags_buffer.data); + tags_buffer.size = 0; + tags_buffer.data = NULL; + } + + return error; +} + +arch_initcall(init_atags_procfs); diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h new file mode 100644 index 000000000000..e5f028d214a1 --- /dev/null +++ b/arch/arm/kernel/atags.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_ATAGS_PROC +extern void save_atags(struct tag *tags); +#else +static inline void save_atags(struct tag *tags) { } +#endif diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 863c66454f2b..db8f54a3451f 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -21,6 +21,7 @@ extern void setup_mm_for_reboot(char mode); extern unsigned long kexec_start_address; extern unsigned long kexec_indirection_page; extern unsigned long kexec_mach_type; +extern unsigned long kexec_boot_atags; /* * Provide a dummy crash_notes definition while crash dump arrives to arm. @@ -62,6 +63,7 @@ void machine_kexec(struct kimage *image) kexec_start_address = image->start; kexec_indirection_page = page_list; kexec_mach_type = machine_arch_type; + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; /* copy our kernel relocation code to the control code page */ memcpy(reboot_code_buffer, diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 062c111c572f..61930eb09029 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -7,23 +7,6 @@ .globl relocate_new_kernel relocate_new_kernel: - /* Move boot params back to where the kernel expects them */ - - ldr r0,kexec_boot_params_address - teq r0,#0 - beq 8f - - ldr r1,kexec_boot_params_copy - mov r6,#KEXEC_BOOT_PARAMS_SIZE/4 -7: - ldr r5,[r1],#4 - str r5,[r0],#4 - subs r6,r6,#1 - bne 7b - -8: - /* Boot params moved, now go on with the kernel */ - ldr r0,kexec_indirection_page ldr r1,kexec_start_address @@ -67,7 +50,7 @@ relocate_new_kernel: mov lr,r1 mov r0,#0 ldr r1,kexec_mach_type - ldr r2,kexec_boot_params_address + ldr r2,kexec_boot_atags mov pc,lr .globl kexec_start_address @@ -82,14 +65,9 @@ kexec_indirection_page: kexec_mach_type: .long 0x0 - /* phy addr where new kernel will expect to find boot params */ - .globl kexec_boot_params_address -kexec_boot_params_address: - .long 0x0 - - /* phy addr where old kernel put a copy of orig boot params */ - .globl kexec_boot_params_copy -kexec_boot_params_copy: + /* phy addr of the atags for the new kernel */ + .globl kexec_boot_atags +kexec_boot_atags: .long 0x0 relocate_new_kernel_end: diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index bf56eb337df1..d3941a7b0455 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/smp.h> #include <linux/fs.h> -#include <linux/kexec.h> #include <asm/cpu.h> #include <asm/elf.h> @@ -39,6 +38,7 @@ #include <asm/mach/time.h> #include "compat.h" +#include "atags.h" #ifndef MEM_SIZE #define MEM_SIZE (16*1024*1024) @@ -62,6 +62,7 @@ extern int root_mountflags; extern void _stext, _text, _etext, __data_start, _edata, _end; unsigned int processor_id; +EXPORT_SYMBOL(processor_id); unsigned int __machine_arch_type; EXPORT_SYMBOL(__machine_arch_type); @@ -784,23 +785,6 @@ static int __init customize_machine(void) } arch_initcall(customize_machine); -#ifdef CONFIG_KEXEC - -/* Physical addr of where the boot params should be for this machine */ -extern unsigned long kexec_boot_params_address; - -/* Physical addr of the buffer into which the boot params are copied */ -extern unsigned long kexec_boot_params_copy; - -/* Pointer to the boot params buffer, for manipulation and display */ -unsigned long kexec_boot_params; -EXPORT_SYMBOL(kexec_boot_params); - -/* The buffer itself - make sure it is sized correctly */ -static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4]; - -#endif - void __init setup_arch(char **cmdline_p) { struct tag *tags = (struct tag *)&init_tags; @@ -819,18 +803,6 @@ void __init setup_arch(char **cmdline_p) else if (mdesc->boot_params) tags = phys_to_virt(mdesc->boot_params); -#ifdef CONFIG_KEXEC - kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf); - kexec_boot_params = (unsigned long)kexec_boot_params_buf; - if (__atags_pointer) { - kexec_boot_params_address = __atags_pointer; - memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE); - } else if (mdesc->boot_params) { - kexec_boot_params_address = mdesc->boot_params; - memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE); - } -#endif - /* * If we have the old style parameters, convert them to * a tag list. @@ -846,6 +818,7 @@ void __init setup_arch(char **cmdline_p) if (tags->hdr.tag == ATAG_CORE) { if (meminfo.nr_banks != 0) squash_mem_tags(tags); + save_atags(tags); parse_tags(tags); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index eafbb2b05eb8..e9dfbab46cb6 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -290,6 +290,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_irq_enable(); local_fiq_enable(); + /* + * Setup local timer for this CPU. + */ + local_timer_setup(cpu); + calibrate_delay(); smp_store_cpu_info(cpu); @@ -300,11 +305,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_set(cpu, cpu_online_map); /* - * Setup local timer for this CPU. - */ - local_timer_setup(cpu); - - /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -454,6 +454,27 @@ int smp_call_function(void (*func)(void *info), void *info, int retry, } EXPORT_SYMBOL_GPL(smp_call_function); +int smp_call_function_single(int cpu, void (*func)(void *info), void *info, + int retry, int wait) +{ + /* prevent preemption and reschedule on another processor */ + int current_cpu = get_cpu(); + int ret = 0; + + if (cpu == current_cpu) { + local_irq_disable(); + func(info); + local_irq_enable(); + } else + ret = smp_call_function_on_cpu(func, info, retry, wait, + cpumask_of_cpu(cpu)); + + put_cpu(); + + return ret; +} +EXPORT_SYMBOL_GPL(smp_call_function_single); + void show_ipi_list(struct seq_file *p) { unsigned int cpu; @@ -481,8 +502,7 @@ void show_local_irqs(struct seq_file *p) static void ipi_timer(void) { irq_enter(); - profile_tick(CPU_PROFILING); - update_process_times(user_mode(get_irq_regs())); + local_timer_interrupt(); irq_exit(); } @@ -621,6 +641,11 @@ void smp_send_timer(void) send_ipi_message(mask, IPI_TIMER); } +void smp_timer_broadcast(cpumask_t mask) +{ + send_ipi_message(mask, IPI_TIMER); +} + void smp_send_stop(void) { cpumask_t mask = cpu_online_map; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5b0422cdde76..074dcd5d9a7e 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -253,6 +253,36 @@ config AT91_TIMER_HZ system clock (of at least several MHz), rounding is less of a problem so it can be safer to use a decimal values like 100. +choice + prompt "Select a UART for early kernel messages" + +config AT91_EARLY_DBGU + bool "DBGU" + +config AT91_EARLY_USART0 + bool "USART0" + +config AT91_EARLY_USART1 + bool "USART1" + +config AT91_EARLY_USART2 + bool "USART2" + depends on ! ARCH_AT91X40 + +config AT91_EARLY_USART3 + bool "USART3" + depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260) + +config AT91_EARLY_USART4 + bool "USART4" + depends on ARCH_AT91SAM9260 + +config AT91_EARLY_USART5 + bool "USART5" + depends on ARCH_AT91SAM9260 + +endchoice + endmenu endif diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 5c090c9442f5..e38d23770992 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -49,8 +49,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) volatile long nr_ticks; if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ - write_seqlock(&xtime_lock); - /* Get number to ticks performed before interrupt and clear PIT interrupt */ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); do { @@ -58,7 +56,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) nr_ticks--; } while (nr_ticks); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } else return IRQ_NONE; /* not handled */ diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b5daf7f5e011..7b9ce7a336b0 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -47,6 +47,9 @@ extern void at91_irq_resume(void); #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ struct at91_gpio_bank { + unsigned chipbase; /* bank's first GPIO number */ + void __iomem *regbase; /* base of register bank */ + struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */ unsigned short id; /* peripheral ID */ unsigned long offset; /* offset from system peripheral base */ struct clk *clock; /* associated clock */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 6aeddd68d8af..f629c2b5f0c5 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -33,12 +33,10 @@ static int gpio_banks; static inline void __iomem *pin_to_controller(unsigned pin) { - void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS; - pin -= PIN_BASE; pin /= 32; if (likely(pin < gpio_banks)) - return sys_base + gpio[pin].offset; + return gpio[pin].regbase; return NULL; } @@ -294,11 +292,11 @@ void at91_gpio_suspend(void) int i; for (i = 0; i < gpio_banks; i++) { - u32 pio = gpio[i].offset; + void __iomem *pio = gpio[i].regbase; - backups[i] = at91_sys_read(pio + PIO_IMR); - at91_sys_write(pio + PIO_IDR, backups[i]); - at91_sys_write(pio + PIO_IER, wakeups[i]); + backups[i] = __raw_readl(pio + PIO_IMR); + __raw_writel(backups[i], pio + PIO_IDR); + __raw_writel(wakeups[i], pio + PIO_IER); if (!wakeups[i]) clk_disable(gpio[i].clock); @@ -315,13 +313,13 @@ void at91_gpio_resume(void) int i; for (i = 0; i < gpio_banks; i++) { - u32 pio = gpio[i].offset; + void __iomem *pio = gpio[i].regbase; if (!wakeups[i]) clk_enable(gpio[i].clock); - at91_sys_write(pio + PIO_IDR, wakeups[i]); - at91_sys_write(pio + PIO_IER, backups[i]); + __raw_writel(wakeups[i], pio + PIO_IDR); + __raw_writel(backups[i], pio + PIO_IER); } } @@ -361,7 +359,13 @@ static void gpio_irq_unmask(unsigned pin) static int gpio_irq_type(unsigned pin, unsigned type) { - return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; + switch (type) { + case IRQ_TYPE_NONE: + case IRQ_TYPE_EDGE_BOTH: + return 0; + default: + return -EINVAL; + } } static struct irq_chip gpio_irqchip = { @@ -376,20 +380,30 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { unsigned pin; struct irq_desc *gpio; + struct at91_gpio_bank *bank; void __iomem *pio; u32 isr; - pio = get_irq_chip_data(irq); + bank = get_irq_chip_data(irq); + pio = bank->regbase; /* temporarily mask (level sensitive) parent IRQ */ desc->chip->ack(irq); for (;;) { - /* reading ISR acks the pending (edge triggered) GPIO interrupt */ + /* Reading ISR acks pending (edge triggered) GPIO interrupts. + * When there none are pending, we're finished unless we need + * to process multiple banks (like ID_PIOCDE on sam9263). + */ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); - if (!isr) - break; + if (!isr) { + if (!bank->next) + break; + bank = bank->next; + pio = bank->regbase; + continue; + } - pin = (unsigned) get_irq_data(irq); + pin = bank->chipbase; gpio = &irq_desc[pin]; while (isr) { @@ -481,24 +495,21 @@ postcore_initcall(at91_gpio_debugfs_init); */ void __init at91_gpio_irq_setup(void) { - unsigned pioc, pin; + unsigned pioc, pin; + struct at91_gpio_bank *this, *prev; - for (pioc = 0, pin = PIN_BASE; - pioc < gpio_banks; - pioc++) { - void __iomem *controller; - unsigned id = gpio[pioc].id; + for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL; + pioc++ < gpio_banks; + prev = this, this++) { + unsigned id = this->id; unsigned i; - clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */ - - controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset; - __raw_writel(~0, controller + PIO_IDR); + /* enable PIO controller's clock */ + clk_enable(this->clock); - set_irq_data(id, (void *) pin); - set_irq_chip_data(id, controller); + __raw_writel(~0, this->regbase + PIO_IDR); - for (i = 0; i < 32; i++, pin++) { + for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. @@ -508,6 +519,14 @@ void __init at91_gpio_irq_setup(void) set_irq_flags(pin, IRQF_VALID); } + /* The toplevel handler handles one bank of GPIOs, except + * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in + * the list, so we only set up that handler. + */ + if (prev && prev->next == this) + continue; + + set_irq_chip_data(id, this); set_irq_chained_handler(id, gpio_irq_handler); } pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); @@ -518,8 +537,20 @@ void __init at91_gpio_irq_setup(void) */ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) { + unsigned i; + struct at91_gpio_bank *last; + BUG_ON(nr_banks > MAX_GPIO_BANKS); gpio = data; gpio_banks = nr_banks; + + for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) { + data->chipbase = PIN_BASE + i * 32; + data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; + + /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ + if (last && last->id == data->id) + last->next = data; + } } diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 61b2dfcb89d6..e774447c0592 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI need to use the indirect method instead. If you don't know what you need, leave this option unselected. +config IXP4XX_QMGR + tristate "IXP4xx Queue Manager support" + help + This driver supports IXP4xx built-in hardware queue manager + and is automatically selected by Ethernet and HSS drivers. + +config IXP4XX_NPE + tristate "IXP4xx Network Processor Engine support" + select HOTPLUG + select FW_LOADER + help + This driver supports IXP4xx built-in network coprocessors + and is automatically selected by Ethernet and HSS drivers. + endmenu endif diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 77e00ade5585..c1956882c48b 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -23,10 +23,12 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o -obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o -obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o -obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o +obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o +obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o diff --git a/arch/arm/mach-ixp4xx/dsmg600-power.c b/arch/arm/mach-ixp4xx/dsmg600-power.c deleted file mode 100644 index 34717872d076..000000000000 --- a/arch/arm/mach-ixp4xx/dsmg600-power.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/dsmg600-power.c - * - * DSM-G600 Power/Reset driver - * Author: Michael Westerhof <mwester@dls.net> - * - * Based on nslu2-power.c - * Copyright (C) 2005 Tower Technologies - * Author: Alessandro Zummo <a.zummo@towertech.it> - * - * which was based on nslu2-io.c - * Copyright (C) 2004 Karen Spearel - * - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/jiffies.h> -#include <linux/timer.h> - -#include <asm/mach-types.h> - -extern void ctrl_alt_del(void); - -/* This is used to make sure the power-button pusher is serious. The button - * must be held until the value of this counter reaches zero. - */ -static volatile int power_button_countdown; - -/* Must hold the button down for at least this many counts to be processed */ -#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ - -static void dsmg600_power_handler(unsigned long data); -static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); - -static void dsmg600_power_handler(unsigned long data) -{ - /* This routine is called twice per second to check the - * state of the power button. - */ - - if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) { - - /* IO Pin is 1 (button pushed) */ - if (power_button_countdown == 0) { - /* Signal init to do the ctrlaltdel action, this will bypass - * init if it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - /* Change the state of the power LED to "blink" */ - gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); - } - power_button_countdown--; - - } else { - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - } - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); -} - -static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init dsmg600_power_init(void) -{ - if (!(machine_is_dsmg600())) - return 0; - - if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button", - NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - DSMG600_RB_IRQ); - - return -EIO; - } - - /* The power button on the D-Link DSM-G600 is on GPIO 15, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); - - return 0; -} - -static void __exit dsmg600_power_exit(void) -{ - if (!(machine_is_dsmg600())) - return; - - del_timer_sync(&dsmg600_power_timer); - - free_irq(DSMG600_RB_IRQ, NULL); -} - -module_init(dsmg600_power_init); -module_exit(dsmg600_power_exit); - -MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>"); -MODULE_DESCRIPTION("DSM-G600 Power/Reset driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index c473d408aa7c..688659668bdf 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -1,25 +1,37 @@ /* * DSM-G600 board-setup * + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> * Copyright (C) 2006 Tower Technologies - * Author: Alessandro Zummo <a.zummo@towertech.it> * - * based ixdp425-setup.c: + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nslu2-io.c: + * Copyright (C) 2004 Karen Spearel * * Author: Alessandro Zummo <a.zummo@towertech.it> + * Author: Michael Westerhof <mwester@dls.net> + * Author: Rod Whitby <rod@whitby.id.au> * Maintainers: http://www.nslu2-linux.org/ */ -#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> #include <linux/serial.h> #include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include <asm/gpio.h> static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", @@ -51,29 +63,34 @@ static struct platform_device dsmg600_i2c_gpio = { }, }; -#ifdef CONFIG_LEDS_CLASS -static struct resource dsmg600_led_resources[] = { +static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = { + { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + }, +}; + +static struct gpio_led dsmg600_led_pins[] = { { - .name = "power", - .start = DSMG600_LED_PWR_GPIO, - .end = DSMG600_LED_PWR_GPIO, - .flags = IXP4XX_GPIO_HIGH, + .name = "power", + .gpio = DSMG600_LED_PWR_GPIO, }, { - .name = "wlan", - .start = DSMG600_LED_WLAN_GPIO, - .end = DSMG600_LED_WLAN_GPIO, - .flags = IXP4XX_GPIO_LOW, + .name = "wlan", + .gpio = DSMG600_LED_WLAN_GPIO, + .active_low = true, }, }; +static struct gpio_led_platform_data dsmg600_led_data = { + .num_leds = ARRAY_SIZE(dsmg600_led_pins), + .leds = dsmg600_led_pins, +}; + static struct platform_device dsmg600_leds = { - .name = "IXP4XX-GPIO-LED", - .id = -1, - .num_resources = ARRAY_SIZE(dsmg600_led_resources), - .resource = dsmg600_led_resources, + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &dsmg600_led_data, }; -#endif static struct resource dsmg600_uart_resources[] = { { @@ -121,6 +138,7 @@ static struct platform_device dsmg600_uart = { static struct platform_device *dsmg600_devices[] __initdata = { &dsmg600_i2c_gpio, &dsmg600_flash, + &dsmg600_leds, }; static void dsmg600_power_off(void) @@ -132,6 +150,57 @@ static void dsmg600_power_off(void) gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); } +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void dsmg600_power_handler(unsigned long data); +static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); + +static void dsmg600_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(DSMG600_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init dsmg600_timer_init(void) { /* The xtal on this machine is non-standard. */ @@ -156,7 +225,8 @@ static void __init dsmg600_init(void) dsmg600_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = dsmg600_power_off; + i2c_register_board_info(0, dsmg600_i2c_board_info, + ARRAY_SIZE(dsmg600_i2c_board_info)); /* The UART is required on the DSM-G600 (Redboot cannot use the * NIC) -- do it here so that it does *not* get removed if @@ -166,10 +236,28 @@ static void __init dsmg600_init(void) platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); -#ifdef CONFIG_LEDS_CLASS - /* We don't care whether or not this works. */ - (void)platform_device_register(&dsmg600_leds); -#endif + pm_power_off = dsmg600_power_off; + + if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "DSM-G600 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(DSMG600_RB_GPIO)); + } + + /* The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); } MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index e89070da28bf..44584afb34a3 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -177,6 +177,31 @@ static struct platform_device ixdp425_uart = { .resource = ixdp425_uart_resources }; +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + } +}; + static struct platform_device *ixdp425_devices[] __initdata = { &ixdp425_i2c_gpio, &ixdp425_flash, @@ -184,7 +209,9 @@ static struct platform_device *ixdp425_devices[] __initdata = { defined(CONFIG_MTD_NAND_PLATFORM_MODULE) &ixdp425_flash_nand, #endif - &ixdp425_uart + &ixdp425_uart, + &ixdp425_eth[0], + &ixdp425_eth[1], }; static void __init ixdp425_init(void) diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c new file mode 100644 index 000000000000..83c137ec582c --- /dev/null +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -0,0 +1,741 @@ +/* + * Intel IXP4xx Network Processor Engine driver for Linux + * + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * The code is based on publicly available information: + * - Intel IXP4xx Developer's Manual and other e-papers + * - Intel IXP400 Access Library Software (BSD license) + * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com> + * Thanks, Christian. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <asm/arch/npe.h> + +#define DEBUG_MSG 0 +#define DEBUG_FW 0 + +#define NPE_COUNT 3 +#define MAX_RETRIES 1000 /* microseconds */ +#define NPE_42X_DATA_SIZE 0x800 /* in dwords */ +#define NPE_46X_DATA_SIZE 0x1000 +#define NPE_A_42X_INSTR_SIZE 0x1000 +#define NPE_B_AND_C_42X_INSTR_SIZE 0x800 +#define NPE_46X_INSTR_SIZE 0x1000 +#define REGS_SIZE 0x1000 + +#define NPE_PHYS_REG 32 + +#define FW_MAGIC 0xFEEDF00D +#define FW_BLOCK_TYPE_INSTR 0x0 +#define FW_BLOCK_TYPE_DATA 0x1 +#define FW_BLOCK_TYPE_EOF 0xF + +/* NPE exec status (read) and command (write) */ +#define CMD_NPE_STEP 0x01 +#define CMD_NPE_START 0x02 +#define CMD_NPE_STOP 0x03 +#define CMD_NPE_CLR_PIPE 0x04 +#define CMD_CLR_PROFILE_CNT 0x0C +#define CMD_RD_INS_MEM 0x10 /* instruction memory */ +#define CMD_WR_INS_MEM 0x11 +#define CMD_RD_DATA_MEM 0x12 /* data memory */ +#define CMD_WR_DATA_MEM 0x13 +#define CMD_RD_ECS_REG 0x14 /* exec access register */ +#define CMD_WR_ECS_REG 0x15 + +#define STAT_RUN 0x80000000 +#define STAT_STOP 0x40000000 +#define STAT_CLEAR 0x20000000 +#define STAT_ECS_K 0x00800000 /* pipeline clean */ + +#define NPE_STEVT 0x1B +#define NPE_STARTPC 0x1C +#define NPE_REGMAP 0x1E +#define NPE_CINDEX 0x1F + +#define INSTR_WR_REG_SHORT 0x0000C000 +#define INSTR_WR_REG_BYTE 0x00004000 +#define INSTR_RD_FIFO 0x0F888220 +#define INSTR_RESET_MBOX 0x0FAC8210 + +#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */ +#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */ +#define ECS_BG_CTXT_REG_2 0x02 +#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */ +#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */ +#define ECS_PRI_1_CTXT_REG_2 0x06 +#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */ +#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */ +#define ECS_PRI_2_CTXT_REG_2 0x0A +#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */ +#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */ +#define ECS_DBG_CTXT_REG_2 0x0E +#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */ + +#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */ +#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */ +#define ECS_REG_0_LDUR_BITS 8 +#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */ +#define ECS_REG_1_CCTXT_BITS 16 +#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */ +#define ECS_REG_1_SELCTXT_BITS 0 +#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */ +#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */ +#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */ + +/* NPE watchpoint_fifo register bit */ +#define WFIFO_VALID 0x80000000 + +/* NPE messaging_status register bit definitions */ +#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */ +#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */ +#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */ +#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */ +#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */ +#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */ +#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */ +#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */ + +/* NPE messaging_control register bit definitions */ +#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */ +#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */ +#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */ +#define MSGCTL_IN_FIFO_WRITE 0x02000000 + +/* NPE mailbox_status value for reset */ +#define RESET_MBOX_STAT 0x0000F0F0 + +const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; + +#define print_npe(pri, npe, fmt, ...) \ + printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) + +#if DEBUG_MSG +#define debug_msg(npe, fmt, ...) \ + print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__) +#else +#define debug_msg(npe, fmt, ...) +#endif + +static struct { + u32 reg, val; +} ecs_reset[] = { + { ECS_BG_CTXT_REG_0, 0xA0000000 }, + { ECS_BG_CTXT_REG_1, 0x01000000 }, + { ECS_BG_CTXT_REG_2, 0x00008000 }, + { ECS_PRI_1_CTXT_REG_0, 0x20000080 }, + { ECS_PRI_1_CTXT_REG_1, 0x01000000 }, + { ECS_PRI_1_CTXT_REG_2, 0x00008000 }, + { ECS_PRI_2_CTXT_REG_0, 0x20000080 }, + { ECS_PRI_2_CTXT_REG_1, 0x01000000 }, + { ECS_PRI_2_CTXT_REG_2, 0x00008000 }, + { ECS_DBG_CTXT_REG_0, 0x20000000 }, + { ECS_DBG_CTXT_REG_1, 0x00000000 }, + { ECS_DBG_CTXT_REG_2, 0x001E0000 }, + { ECS_INSTRUCT_REG, 0x1003C00F }, +}; + +static struct npe npe_tab[NPE_COUNT] = { + { + .id = 0, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT, + .regs_phys = IXP4XX_NPEA_BASE_PHYS, + }, { + .id = 1, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT, + .regs_phys = IXP4XX_NPEB_BASE_PHYS, + }, { + .id = 2, + .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT, + .regs_phys = IXP4XX_NPEC_BASE_PHYS, + } +}; + +int npe_running(struct npe *npe) +{ + return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0; +} + +static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data) +{ + __raw_writel(data, &npe->regs->exec_data); + __raw_writel(addr, &npe->regs->exec_addr); + __raw_writel(cmd, &npe->regs->exec_status_cmd); +} + +static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd) +{ + __raw_writel(addr, &npe->regs->exec_addr); + __raw_writel(cmd, &npe->regs->exec_status_cmd); + /* Iintroduce extra read cycles after issuing read command to NPE + so that we read the register after the NPE has updated it. + This is to overcome race condition between XScale and NPE */ + __raw_readl(&npe->regs->exec_data); + __raw_readl(&npe->regs->exec_data); + return __raw_readl(&npe->regs->exec_data); +} + +static void npe_clear_active(struct npe *npe, u32 reg) +{ + u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG); + npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE); +} + +static void npe_start(struct npe *npe) +{ + /* ensure only Background Context Stack Level is active */ + npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0); + npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0); + npe_clear_active(npe, ECS_DBG_CTXT_REG_0); + + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd); +} + +static void npe_stop(struct npe *npe) +{ + __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd); + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/ +} + +static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx, + u32 ldur) +{ + u32 wc; + int i; + + /* set the Active bit, and the LDUR, in the debug level */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, + ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS)); + + /* set CCTXT at ECS DEBUG L3 to specify in which context to execute + the instruction, and set SELCTXT at ECS DEBUG Level to specify + which context store to access. + Debug ECS Level Reg 1 has form 0x000n000n, where n = context number + */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG, + (ctx << ECS_REG_1_CCTXT_BITS) | + (ctx << ECS_REG_1_SELCTXT_BITS)); + + /* clear the pipeline */ + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + + /* load NPE instruction into the instruction register */ + npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr); + + /* we need this value later to wait for completion of NPE execution + step */ + wc = __raw_readl(&npe->regs->watch_count); + + /* issue a Step One command via the Execution Control register */ + __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd); + + /* Watch Count register increments when NPE completes an instruction */ + for (i = 0; i < MAX_RETRIES; i++) { + if (wc != __raw_readl(&npe->regs->watch_count)) + return 0; + udelay(1); + } + + print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n"); + return -ETIMEDOUT; +} + +static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr, + u8 val, u32 ctx) +{ + /* here we build the NPE assembler instruction: mov8 d0, #0 */ + u32 instr = INSTR_WR_REG_BYTE | /* OpCode */ + addr << 9 | /* base Operand */ + (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ + (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */ + return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ +} + +static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr, + u16 val, u32 ctx) +{ + /* here we build the NPE assembler instruction: mov16 d0, #0 */ + u32 instr = INSTR_WR_REG_SHORT | /* OpCode */ + addr << 9 | /* base Operand */ + (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ + (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */ + return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ +} + +static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr, + u32 val, u32 ctx) +{ + /* write in 16 bit steps first the high and then the low value */ + if (npe_logical_reg_write16(npe, addr, val >> 16, ctx)) + return -ETIMEDOUT; + return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx); +} + +static int npe_reset(struct npe *npe) +{ + u32 val, ctl, exec_count, ctx_reg2; + int i; + + ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) & + 0x3F3FFFFF; + + /* disable parity interrupt */ + __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control); + + /* pre exec - debug instruction */ + /* turn off the halt bit by clearing Execution Count register. */ + exec_count = __raw_readl(&npe->regs->exec_count); + __raw_writel(0, &npe->regs->exec_count); + /* ensure that IF and IE are on (temporarily), so that we don't end up + stepping forever */ + ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG); + npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 | + ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE); + + /* clear the FIFOs */ + while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID) + ; + while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) + /* read from the outFIFO until empty */ + print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n", + __raw_readl(&npe->regs->in_out_fifo)); + + while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) + /* step execution of the NPE intruction to read inFIFO using + the Debug Executing Context stack */ + if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0)) + return -ETIMEDOUT; + + /* reset the mailbox reg from the XScale side */ + __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status); + /* from NPE side */ + if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0)) + return -ETIMEDOUT; + + /* Reset the physical registers in the NPE register file */ + for (val = 0; val < NPE_PHYS_REG; val++) { + if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0)) + return -ETIMEDOUT; + /* address is either 0 or 4 */ + if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0)) + return -ETIMEDOUT; + } + + /* Reset the context store = each context's Context Store registers */ + + /* Context 0 has no STARTPC. Instead, this value is used to set NextPC + for Background ECS, to set where NPE starts executing code */ + val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG); + val &= ~ECS_REG_0_NEXTPC_MASK; + val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK; + npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val); + + for (i = 0; i < 16; i++) { + if (i) { /* Context 0 has no STEVT nor STARTPC */ + /* STEVT = off, 0x80 */ + if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i)) + return -ETIMEDOUT; + if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i)) + return -ETIMEDOUT; + } + /* REGMAP = d0->p0, d8->p2, d16->p4 */ + if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i)) + return -ETIMEDOUT; + if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i)) + return -ETIMEDOUT; + } + + /* post exec */ + /* clear active bit in debug level */ + npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0); + /* clear the pipeline */ + __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); + /* restore previous values */ + __raw_writel(exec_count, &npe->regs->exec_count); + npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2); + + /* write reset values to Execution Context Stack registers */ + for (val = 0; val < ARRAY_SIZE(ecs_reset); val++) + npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG, + ecs_reset[val].val); + + /* clear the profile counter */ + __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd); + + __raw_writel(0, &npe->regs->exec_count); + __raw_writel(0, &npe->regs->action_points[0]); + __raw_writel(0, &npe->regs->action_points[1]); + __raw_writel(0, &npe->regs->action_points[2]); + __raw_writel(0, &npe->regs->action_points[3]); + __raw_writel(0, &npe->regs->watch_count); + + val = ixp4xx_read_feature_bits(); + /* reset the NPE */ + ixp4xx_write_feature_bits(val & + ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); + for (i = 0; i < MAX_RETRIES; i++) { + if (!(ixp4xx_read_feature_bits() & + (IXP4XX_FEATURE_RESET_NPEA << npe->id))) + break; /* reset completed */ + udelay(1); + } + if (i == MAX_RETRIES) + return -ETIMEDOUT; + + /* deassert reset */ + ixp4xx_write_feature_bits(val | + (IXP4XX_FEATURE_RESET_NPEA << npe->id)); + for (i = 0; i < MAX_RETRIES; i++) { + if (ixp4xx_read_feature_bits() & + (IXP4XX_FEATURE_RESET_NPEA << npe->id)) + break; /* NPE is back alive */ + udelay(1); + } + if (i == MAX_RETRIES) + return -ETIMEDOUT; + + npe_stop(npe); + + /* restore NPE configuration bus Control Register - parity settings */ + __raw_writel(ctl, &npe->regs->messaging_control); + return 0; +} + + +int npe_send_message(struct npe *npe, const void *msg, const char *what) +{ + const u32 *send = msg; + int cycles = 0; + + debug_msg(npe, "Trying to send message %s [%08X:%08X]\n", + what, send[0], send[1]); + + if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) { + debug_msg(npe, "NPE input FIFO not empty\n"); + return -EIO; + } + + __raw_writel(send[0], &npe->regs->in_out_fifo); + + if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) { + debug_msg(npe, "NPE input FIFO full\n"); + return -EIO; + } + + __raw_writel(send[1], &npe->regs->in_out_fifo); + + while ((cycles < MAX_RETRIES) && + (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) { + udelay(1); + cycles++; + } + + if (cycles == MAX_RETRIES) { + debug_msg(npe, "Timeout sending message\n"); + return -ETIMEDOUT; + } + + debug_msg(npe, "Sending a message took %i cycles\n", cycles); + return 0; +} + +int npe_recv_message(struct npe *npe, void *msg, const char *what) +{ + u32 *recv = msg; + int cycles = 0, cnt = 0; + + debug_msg(npe, "Trying to receive message %s\n", what); + + while (cycles < MAX_RETRIES) { + if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) { + recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo); + if (cnt == 2) + break; + } else { + udelay(1); + cycles++; + } + } + + switch(cnt) { + case 1: + debug_msg(npe, "Received [%08X]\n", recv[0]); + break; + case 2: + debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]); + break; + } + + if (cycles == MAX_RETRIES) { + debug_msg(npe, "Timeout waiting for message\n"); + return -ETIMEDOUT; + } + + debug_msg(npe, "Receiving a message took %i cycles\n", cycles); + return 0; +} + +int npe_send_recv_message(struct npe *npe, void *msg, const char *what) +{ + int result; + u32 *send = msg, recv[2]; + + if ((result = npe_send_message(npe, msg, what)) != 0) + return result; + if ((result = npe_recv_message(npe, recv, what)) != 0) + return result; + + if ((recv[0] != send[0]) || (recv[1] != send[1])) { + debug_msg(npe, "Message %s: unexpected message received\n", + what); + return -EIO; + } + return 0; +} + + +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) +{ + const struct firmware *fw_entry; + + struct dl_block { + u32 type; + u32 offset; + } *blk; + + struct dl_image { + u32 magic; + u32 id; + u32 size; + union { + u32 data[0]; + struct dl_block blocks[0]; + }; + } *image; + + struct dl_codeblock { + u32 npe_addr; + u32 size; + u32 data[0]; + } *cb; + + int i, j, err, data_size, instr_size, blocks, table_end; + u32 cmd; + + if ((err = request_firmware(&fw_entry, name, dev)) != 0) + return err; + + err = -EINVAL; + if (fw_entry->size < sizeof(struct dl_image)) { + print_npe(KERN_ERR, npe, "incomplete firmware file\n"); + goto err; + } + image = (struct dl_image*)fw_entry->data; + +#if DEBUG_FW + print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n", + image->magic, image->id, image->size, image->size * 4); +#endif + + if (image->magic == swab32(FW_MAGIC)) { /* swapped file */ + image->id = swab32(image->id); + image->size = swab32(image->size); + } else if (image->magic != FW_MAGIC) { + print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n", + image->magic); + goto err; + } + if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) { + print_npe(KERN_ERR, npe, + "inconsistent size of firmware file\n"); + goto err; + } + if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) { + print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n"); + goto err; + } + if (image->magic == swab32(FW_MAGIC)) + for (i = 0; i < image->size; i++) + image->data[i] = swab32(image->data[i]); + + if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) { + print_npe(KERN_INFO, npe, "IXP46x firmware ignored on " + "IXP42x\n"); + goto err; + } + + if (npe_running(npe)) { + print_npe(KERN_INFO, npe, "unable to load firmware, NPE is " + "already running\n"); + err = -EBUSY; + goto err; + } +#if 0 + npe_stop(npe); + npe_reset(npe); +#endif + + print_npe(KERN_INFO, npe, "firmware functionality 0x%X, " + "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, + (image->id >> 8) & 0xFF, image->id & 0xFF); + + if (!cpu_is_ixp46x()) { + if (!npe->id) + instr_size = NPE_A_42X_INSTR_SIZE; + else + instr_size = NPE_B_AND_C_42X_INSTR_SIZE; + data_size = NPE_42X_DATA_SIZE; + } else { + instr_size = NPE_46X_INSTR_SIZE; + data_size = NPE_46X_DATA_SIZE; + } + + for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size; + blocks++) + if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF) + break; + if (blocks * sizeof(struct dl_block) / 4 >= image->size) { + print_npe(KERN_INFO, npe, "firmware EOF block marker not " + "found\n"); + goto err; + } + +#if DEBUG_FW + print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks); +#endif + + table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */; + for (i = 0, blk = image->blocks; i < blocks; i++, blk++) { + if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4 + || blk->offset < table_end) { + print_npe(KERN_INFO, npe, "invalid offset 0x%X of " + "firmware block #%i\n", blk->offset, i); + goto err; + } + + cb = (struct dl_codeblock*)&image->data[blk->offset]; + if (blk->type == FW_BLOCK_TYPE_INSTR) { + if (cb->npe_addr + cb->size > instr_size) + goto too_big; + cmd = CMD_WR_INS_MEM; + } else if (blk->type == FW_BLOCK_TYPE_DATA) { + if (cb->npe_addr + cb->size > data_size) + goto too_big; + cmd = CMD_WR_DATA_MEM; + } else { + print_npe(KERN_INFO, npe, "invalid firmware block #%i " + "type 0x%X\n", i, blk->type); + goto err; + } + if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) { + print_npe(KERN_INFO, npe, "firmware block #%i doesn't " + "fit in firmware image: type %c, start 0x%X," + " length 0x%X\n", i, + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', + cb->npe_addr, cb->size); + goto err; + } + + for (j = 0; j < cb->size; j++) + npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]); + } + + npe_start(npe); + if (!npe_running(npe)) + print_npe(KERN_ERR, npe, "unable to start\n"); + release_firmware(fw_entry); + return 0; + +too_big: + print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE " + "memory: type %c, start 0x%X, length 0x%X\n", i, + blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', + cb->npe_addr, cb->size); +err: + release_firmware(fw_entry); + return err; +} + + +struct npe *npe_request(int id) +{ + if (id < NPE_COUNT) + if (npe_tab[id].valid) + if (try_module_get(THIS_MODULE)) + return &npe_tab[id]; + return NULL; +} + +void npe_release(struct npe *npe) +{ + module_put(THIS_MODULE); +} + + +static int __init npe_init_module(void) +{ + + int i, found = 0; + + for (i = 0; i < NPE_COUNT; i++) { + struct npe *npe = &npe_tab[i]; + if (!(ixp4xx_read_feature_bits() & + (IXP4XX_FEATURE_RESET_NPEA << i))) + continue; /* NPE already disabled or not present */ + if (!(npe->mem_res = request_mem_region(npe->regs_phys, + REGS_SIZE, + npe_name(npe)))) { + print_npe(KERN_ERR, npe, + "failed to request memory region\n"); + continue; + } + + if (npe_reset(npe)) + continue; + npe->valid = 1; + found++; + } + + if (!found) + return -ENOSYS; + return 0; +} + +static void __exit npe_cleanup_module(void) +{ + int i; + + for (i = 0; i < NPE_COUNT; i++) + if (npe_tab[i].mem_res) { + npe_reset(&npe_tab[i]); + release_resource(npe_tab[i].mem_res); + } +} + +module_init(npe_init_module); +module_exit(npe_cleanup_module); + +MODULE_AUTHOR("Krzysztof Halasa"); +MODULE_LICENSE("GPL v2"); + +EXPORT_SYMBOL(npe_names); +EXPORT_SYMBOL(npe_running); +EXPORT_SYMBOL(npe_request); +EXPORT_SYMBOL(npe_release); +EXPORT_SYMBOL(npe_load_firmware); +EXPORT_SYMBOL(npe_send_message); +EXPORT_SYMBOL(npe_recv_message); +EXPORT_SYMBOL(npe_send_recv_message); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c new file mode 100644 index 000000000000..e83301325301 --- /dev/null +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -0,0 +1,274 @@ +/* + * Intel IXP4xx Queue Manager driver for Linux + * + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/arch/qmgr.h> + +#define DEBUG 0 + +struct qmgr_regs __iomem *qmgr_regs; +static struct resource *mem_res; +static spinlock_t qmgr_lock; +static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ +static void (*irq_handlers[HALF_QUEUES])(void *pdev); +static void *irq_pdevs[HALF_QUEUES]; + +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev) +{ + u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */ + int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + unsigned long flags; + + src &= 7; + spin_lock_irqsave(&qmgr_lock, flags); + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg); + irq_handlers[queue] = handler; + irq_pdevs[queue] = pdev; + spin_unlock_irqrestore(&qmgr_lock, flags); +} + + +static irqreturn_t qmgr_irq1(int irq, void *pdev) +{ + int i; + u32 val = __raw_readl(&qmgr_regs->irqstat[0]); + __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */ + + for (i = 0; i < HALF_QUEUES; i++) + if (val & (1 << i)) + irq_handlers[i](irq_pdevs[i]); + + return val ? IRQ_HANDLED : 0; +} + + +void qmgr_enable_irq(unsigned int queue) +{ + unsigned long flags; + + spin_lock_irqsave(&qmgr_lock, flags); + __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue), + &qmgr_regs->irqen[0]); + spin_unlock_irqrestore(&qmgr_lock, flags); +} + +void qmgr_disable_irq(unsigned int queue) +{ + unsigned long flags; + + spin_lock_irqsave(&qmgr_lock, flags); + __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue), + &qmgr_regs->irqen[0]); + spin_unlock_irqrestore(&qmgr_lock, flags); +} + +static inline void shift_mask(u32 *mask) +{ + mask[3] = mask[3] << 1 | mask[2] >> 31; + mask[2] = mask[2] << 1 | mask[1] >> 31; + mask[1] = mask[1] << 1 | mask[0] >> 31; + mask[0] <<= 1; +} + +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark) +{ + u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ + int err; + + if (queue >= HALF_QUEUES) + return -ERANGE; + + if ((nearly_empty_watermark | nearly_full_watermark) & ~7) + return -EINVAL; + + switch (len) { + case 16: + cfg = 0 << 24; + mask[0] = 0x1; + break; + case 32: + cfg = 1 << 24; + mask[0] = 0x3; + break; + case 64: + cfg = 2 << 24; + mask[0] = 0xF; + break; + case 128: + cfg = 3 << 24; + mask[0] = 0xFF; + break; + default: + return -EINVAL; + } + + cfg |= nearly_empty_watermark << 26; + cfg |= nearly_full_watermark << 29; + len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */ + mask[1] = mask[2] = mask[3] = 0; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + spin_lock_irq(&qmgr_lock); + if (__raw_readl(&qmgr_regs->sram[queue])) { + err = -EBUSY; + goto err; + } + + while (1) { + if (!(used_sram_bitmap[0] & mask[0]) && + !(used_sram_bitmap[1] & mask[1]) && + !(used_sram_bitmap[2] & mask[2]) && + !(used_sram_bitmap[3] & mask[3])) + break; /* found free space */ + + addr++; + shift_mask(mask); + if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) { + printk(KERN_ERR "qmgr: no free SRAM space for" + " queue %i\n", queue); + err = -ENOMEM; + goto err; + } + } + + used_sram_bitmap[0] |= mask[0]; + used_sram_bitmap[1] |= mask[1]; + used_sram_bitmap[2] |= mask[2]; + used_sram_bitmap[3] |= mask[3]; + __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]); + spin_unlock_irq(&qmgr_lock); + +#if DEBUG + printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n", + queue, addr); +#endif + return 0; + +err: + spin_unlock_irq(&qmgr_lock); + module_put(THIS_MODULE); + return err; +} + +void qmgr_release_queue(unsigned int queue) +{ + u32 cfg, addr, mask[4]; + + BUG_ON(queue >= HALF_QUEUES); /* not in valid range */ + + spin_lock_irq(&qmgr_lock); + cfg = __raw_readl(&qmgr_regs->sram[queue]); + addr = (cfg >> 14) & 0xFF; + + BUG_ON(!addr); /* not requested */ + + switch ((cfg >> 24) & 3) { + case 0: mask[0] = 0x1; break; + case 1: mask[0] = 0x3; break; + case 2: mask[0] = 0xF; break; + case 3: mask[0] = 0xFF; break; + } + + while (addr--) + shift_mask(mask); + + __raw_writel(0, &qmgr_regs->sram[queue]); + + used_sram_bitmap[0] &= ~mask[0]; + used_sram_bitmap[1] &= ~mask[1]; + used_sram_bitmap[2] &= ~mask[2]; + used_sram_bitmap[3] &= ~mask[3]; + irq_handlers[queue] = NULL; /* catch IRQ bugs */ + spin_unlock_irq(&qmgr_lock); + + module_put(THIS_MODULE); +#if DEBUG + printk(KERN_DEBUG "qmgr: released queue %i\n", queue); +#endif +} + +static int qmgr_init(void) +{ + int i, err; + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, + IXP4XX_QMGR_REGION_SIZE, + "IXP4xx Queue Manager"); + if (mem_res == NULL) + return -EBUSY; + + qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); + if (qmgr_regs == NULL) { + err = -ENOMEM; + goto error_map; + } + + /* reset qmgr registers */ + for (i = 0; i < 4; i++) { + __raw_writel(0x33333333, &qmgr_regs->stat1[i]); + __raw_writel(0, &qmgr_regs->irqsrc[i]); + } + for (i = 0; i < 2; i++) { + __raw_writel(0, &qmgr_regs->stat2[i]); + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */ + __raw_writel(0, &qmgr_regs->irqen[i]); + } + + for (i = 0; i < QUEUES; i++) + __raw_writel(0, &qmgr_regs->sram[i]); + + err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0, + "IXP4xx Queue Manager", NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i\n", + IRQ_IXP4XX_QM1); + goto error_irq; + } + + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ + spin_lock_init(&qmgr_lock); + + printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); + return 0; + +error_irq: + iounmap(qmgr_regs); +error_map: + release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); + return err; +} + +static void qmgr_remove(void) +{ + free_irq(IRQ_IXP4XX_QM1, NULL); + synchronize_irq(IRQ_IXP4XX_QM1); + iounmap(qmgr_regs); + release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); +} + +module_init(qmgr_init); +module_exit(qmgr_remove); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Krzysztof Halasa"); + +EXPORT_SYMBOL(qmgr_regs); +EXPORT_SYMBOL(qmgr_set_irq); +EXPORT_SYMBOL(qmgr_enable_irq); +EXPORT_SYMBOL(qmgr_disable_irq); +EXPORT_SYMBOL(qmgr_request_queue); +EXPORT_SYMBOL(qmgr_release_queue); diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c deleted file mode 100644 index 29aa98d3a7fa..000000000000 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-power.c - * - * NAS 100d Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nas100d-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/reboot.h> - -#include <asm/mach-types.h> - -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) -{ - /* Signal init to do the ctrlaltdel action, this will bypass init if - * it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - return IRQ_HANDLED; -} - -static int __init nas100d_power_init(void) -{ - if (!(machine_is_nas100d())) - return 0; - - set_irq_type(NAS100D_RB_IRQ, IRQT_LOW); - - if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler, - IRQF_DISABLED, "NAS100D reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - NAS100D_RB_IRQ); - - return -EIO; - } - - return 0; -} - -static void __exit nas100d_power_exit(void) -{ - if (!(machine_is_nas100d())) - return; - - free_irq(NAS100D_RB_IRQ, NULL); -} - -module_init(nas100d_power_init); -module_exit(nas100d_power_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("NAS100D Power/Reset driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 54d884fb2517..4cecae84837b 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -3,8 +3,14 @@ * * NAS 100d board-setup * - * based ixdp425-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nas100d-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nas100d-io.c + * Copyright (C) 2004 Karen Spearel * * Author: Alessandro Zummo <a.zummo@towertech.it> * Author: Rod Whitby <rod@whitby.id.au> @@ -12,15 +18,22 @@ * */ -#include <linux/kernel.h> +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include <asm/io.h> +#include <asm/gpio.h> static struct flash_platform_data nas100d_flash_data = { .map_name = "cfi_probe", @@ -39,35 +52,40 @@ static struct platform_device nas100d_flash = { .resource = &nas100d_flash_resource, }; -#ifdef CONFIG_LEDS_IXP4XX -static struct resource nas100d_led_resources[] = { +static struct i2c_board_info __initdata nas100d_i2c_board_info [] = { + { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + }, +}; + +static struct gpio_led nas100d_led_pins[] = { { .name = "wlan", /* green led */ - .start = 0, - .end = 0, - .flags = IXP4XX_GPIO_LOW, + .gpio = NAS100D_LED_WLAN_GPIO, + .active_low = true, }, { - .name = "ready", /* blue power led (off is flashing!) */ - .start = 15, - .end = 15, - .flags = IXP4XX_GPIO_LOW, + .name = "power", /* blue power led (off=flashing) */ + .gpio = NAS100D_LED_PWR_GPIO, + .active_low = true, }, { .name = "disk", /* yellow led */ - .start = 3, - .end = 3, - .flags = IXP4XX_GPIO_LOW, + .gpio = NAS100D_LED_DISK_GPIO, + .active_low = true, }, }; +static struct gpio_led_platform_data nas100d_led_data = { + .num_leds = ARRAY_SIZE(nas100d_led_pins), + .leds = nas100d_led_pins, +}; + static struct platform_device nas100d_leds = { - .name = "IXP4XX-GPIO-LED", + .name = "leds-gpio", .id = -1, - .num_resources = ARRAY_SIZE(nas100d_led_resources), - .resource = nas100d_led_resources, + .dev.platform_data = &nas100d_led_data, }; -#endif static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = { .sda_pin = NAS100D_SDA_PIN, @@ -125,12 +143,28 @@ static struct platform_device nas100d_uart = { .resource = nas100d_uart_resources, }; +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info nas100d_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + } +}; + +static struct platform_device nas100d_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = nas100d_plat_eth, + } +}; + static struct platform_device *nas100d_devices[] __initdata = { &nas100d_i2c_gpio, &nas100d_flash, -#ifdef CONFIG_LEDS_IXP4XX &nas100d_leds, -#endif + &nas100d_eth[0], }; static void nas100d_power_off(void) @@ -144,8 +178,63 @@ static void nas100d_power_off(void) gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); } +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void nas100d_power_handler(unsigned long data); +static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); + +static void nas100d_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(NAS100D_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init nas100d_init(void) { + DECLARE_MAC_BUF(mac_buf); + uint8_t __iomem *f; + int i; + ixp4xx_sys_init(); /* gpio 14 and 15 are _not_ clocks */ @@ -155,7 +244,8 @@ static void __init nas100d_init(void) nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = nas100d_power_off; + i2c_register_board_info(0, nas100d_i2c_board_info, + ARRAY_SIZE(nas100d_i2c_board_info)); /* * This is only useful on a modified machine, but it is valuable @@ -165,6 +255,48 @@ static void __init nas100d_init(void) (void)platform_device_register(&nas100d_uart); platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); + + pm_power_off = nas100d_power_off; + + if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "NAS100D reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NAS100D_RB_GPIO)); + } + + /* The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + + /* + * Map in a portion of the flash and read the MAC address. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000); + if (f) { + for (i = 0; i < 6; i++) +#ifdef __ARMEB__ + nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i); +#else + nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3)); +#endif + iounmap(f); + } + printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n", + print_mac(mac_buf, nas100d_plat_eth[0].hwaddr)); + } MACHINE_START(NAS100D, "Iomega NAS 100d") diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c deleted file mode 100644 index 6f10dc208320..000000000000 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-power.c - * - * NSLU2 Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nslu2-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/mach-types.h> - -static irqreturn_t nslu2_power_handler(int irq, void *dev_id) -{ - /* Signal init to do the ctrlaltdel action, this will bypass init if - * it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - return IRQ_HANDLED; -} - -static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. - */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nslu2_power_init(void) -{ - if (!(machine_is_nslu2())) - return 0; - - *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ - - set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); - set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); - - if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, - IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - NSLU2_RB_IRQ); - - return -EIO; - } - - if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, - IRQF_DISABLED, "NSLU2 power button", NULL) < 0) { - - printk(KERN_DEBUG "Power Button IRQ %d not available\n", - NSLU2_PB_IRQ); - - return -EIO; - } - - return 0; -} - -static void __exit nslu2_power_exit(void) -{ - if (!(machine_is_nslu2())) - return; - - free_irq(NSLU2_RB_IRQ, NULL); - free_irq(NSLU2_PB_IRQ, NULL); -} - -module_init(nslu2_power_init); -module_exit(nslu2_power_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 77277d27fcc5..acaebcbce53a 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -3,27 +3,35 @@ * * NSLU2 board-setup * - * based ixdp425-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + * + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies * * Author: Mark Rakes <mrakes at mac.com> * Author: Rod Whitby <rod@whitby.id.au> + * Author: Alessandro Zummo <a.zummo@towertech.it> * Maintainers: http://www.nslu2-linux.org/ * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 */ -#include <linux/kernel.h> +#include <linux/if_ether.h> +#include <linux/irq.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/leds.h> +#include <linux/reboot.h> +#include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include <asm/io.h> +#include <asm/gpio.h> static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", @@ -47,41 +55,43 @@ static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { .scl_pin = NSLU2_SCL_PIN, }; -#ifdef CONFIG_LEDS_IXP4XX -static struct resource nslu2_led_resources[] = { +static struct i2c_board_info __initdata nslu2_i2c_board_info [] = { + { + I2C_BOARD_INFO("rtc-x1205", 0x6f), + }, +}; + +static struct gpio_led nslu2_led_pins[] = { { .name = "ready", /* green led */ - .start = NSLU2_LED_GRN_GPIO, - .end = NSLU2_LED_GRN_GPIO, - .flags = IXP4XX_GPIO_HIGH, + .gpio = NSLU2_LED_GRN_GPIO, }, { .name = "status", /* red led */ - .start = NSLU2_LED_RED_GPIO, - .end = NSLU2_LED_RED_GPIO, - .flags = IXP4XX_GPIO_HIGH, + .gpio = NSLU2_LED_RED_GPIO, }, { .name = "disk-1", - .start = NSLU2_LED_DISK1_GPIO, - .end = NSLU2_LED_DISK1_GPIO, - .flags = IXP4XX_GPIO_LOW, + .gpio = NSLU2_LED_DISK1_GPIO, + .active_low = true, }, { .name = "disk-2", - .start = NSLU2_LED_DISK2_GPIO, - .end = NSLU2_LED_DISK2_GPIO, - .flags = IXP4XX_GPIO_LOW, + .gpio = NSLU2_LED_DISK2_GPIO, + .active_low = true, }, }; +static struct gpio_led_platform_data nslu2_led_data = { + .num_leds = ARRAY_SIZE(nslu2_led_pins), + .leds = nslu2_led_pins, +}; + static struct platform_device nslu2_leds = { - .name = "IXP4XX-GPIO-LED", + .name = "leds-gpio", .id = -1, - .num_resources = ARRAY_SIZE(nslu2_led_resources), - .resource = nslu2_led_resources, + .dev.platform_data = &nslu2_led_data, }; -#endif static struct platform_device nslu2_i2c_gpio = { .name = "i2c-gpio", @@ -140,13 +150,29 @@ static struct platform_device nslu2_uart = { .resource = nslu2_uart_resources, }; +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info nslu2_plat_eth[] = { + { + .phy = 1, + .rxq = 3, + .txreadyq = 20, + } +}; + +static struct platform_device nslu2_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = nslu2_plat_eth, + } +}; + static struct platform_device *nslu2_devices[] __initdata = { &nslu2_i2c_gpio, &nslu2_flash, &nslu2_beeper, -#ifdef CONFIG_LEDS_IXP4XX &nslu2_leds, -#endif + &nslu2_eth[0], }; static void nslu2_power_off(void) @@ -160,6 +186,25 @@ static void nslu2_power_off(void) gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); } +static irqreturn_t nslu2_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init nslu2_timer_init(void) { /* The xtal on this machine is non-standard. */ @@ -175,13 +220,18 @@ static struct sys_timer nslu2_timer = { static void __init nslu2_init(void) { + DECLARE_MAC_BUF(mac_buf); + uint8_t __iomem *f; + int i; + ixp4xx_sys_init(); nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nslu2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = nslu2_power_off; + i2c_register_board_info(0, nslu2_i2c_board_info, + ARRAY_SIZE(nslu2_i2c_board_info)); /* * This is only useful on a modified machine, but it is valuable @@ -191,6 +241,43 @@ static void __init nslu2_init(void) (void)platform_device_register(&nslu2_uart); platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); + + pm_power_off = nslu2_power_off; + + if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NSLU2_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, + IRQF_DISABLED | IRQF_TRIGGER_HIGH, + "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(NSLU2_PB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC address. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000); + if (f) { + for (i = 0; i < 6; i++) +#ifdef __ARMEB__ + nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i); +#else + nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3)); +#endif + iounmap(f); + } + printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n", + print_mac(mac_buf, nslu2_plat_eth[0].hwaddr)); + } MACHINE_START(NSLU2, "Linksys NSLU2") diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 35156ca39df7..39b3bb7f1020 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -7,24 +7,21 @@ config MACH_REALVIEW_EB help Include support for the ARM(R) RealView Emulation Baseboard platform. -config REALVIEW_MPCORE - bool "Support MPcore tile" +config REALVIEW_EB_ARM11MP + bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB select CACHE_L2X0 help - Enable support for the MPCore tile on the Realview platform. - Since there are device address and interrupt differences, a - kernel built with this option enabled is not compatible with - other tiles. + Enable support for the ARM11MPCore tile on the Realview platform. -config REALVIEW_MPCORE_REVB - bool "Support MPcore RevB tile" - depends on REALVIEW_MPCORE +config REALVIEW_EB_ARM11MP_REVB + bool "Support ARM11MPCore RevB tile" + depends on REALVIEW_EB_ARM11MP default n help - Enable support for the MPCore RevB tile on the Realview platform. - Since there are device address differences, a + Enable support for the ARM11MPCore RevB tile on the Realview + platform. Since there are device address differences, a kernel built with this option enabled is not compatible with - other tiles. + other revisions of the ARM11MPCore tile. endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 36e76ba937fc..ca1e390c3c28 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,6 +4,5 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 61d70218f1e8..98aefc9f4df3 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -25,6 +25,8 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/system.h> #include <asm/hardware.h> @@ -37,7 +39,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/irq.h> -#include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/mach/mmc.h> @@ -48,6 +49,9 @@ #define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) +/* used by entry-macro.S */ +void __iomem *gic_cpu_base_addr; + /* * This is the RealView sched_clock implementation. This has * a resolution of 41.7ns, and a maximum value of about 179s. @@ -121,26 +125,6 @@ struct platform_device realview_flash_device = { .resource = &realview_flash_resource, }; -static struct resource realview_smc91x_resources[] = { - [0] = { - .start = REALVIEW_ETH_BASE, - .end = REALVIEW_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_ETH, - .end = IRQ_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device realview_smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(realview_smc91x_resources), - .resource = realview_smc91x_resources, -}; - static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, @@ -484,45 +468,64 @@ void realview_leds_event(led_event_t ledevt) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -/* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long realview_gettimeoffset(void) +static void timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) { - unsigned long ticks1, ticks2, status; + unsigned long ctrl; - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for - * an interrupt. We get around this by ensuring that the - * counter has not reloaded between our two reads. - */ - ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; - do { - ticks1 = ticks2; - status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET) - + ((IRQ_TIMERINT0_1 >> 5) << 2)); - ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; - } while (ticks2 > ticks1); + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - /* - * Number of ticks since last interrupt. - */ - ticks1 = TIMER_RELOAD - ticks2; + ctrl = TIMER_CTRL_PERIODIC; + ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl = TIMER_CTRL_ONESHOT; + ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } - /* - * Interrupt pending? If so, we've reloaded once already. - * - * FIXME: Need to check this is effectively timer 0 that expires - */ - if (status & IRQMASK_TIMERINT0_1) - ticks1 += TIMER_RELOAD; + writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); +} - /* - * Convert the ticks to usecs - */ - return TICKS2USECS(ticks1); +static int timer_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); + + writel(evt, TIMER0_VA_BASE + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device timer0_clockevent = { + .name = "timer0", + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = timer_set_mode, + .set_next_event = timer_set_next_event, + .rating = 300, + .cpumask = CPU_MASK_ALL, +}; + +static void __init realview_clockevents_init(unsigned int timer_irq) +{ + timer0_clockevent.irq = timer_irq; + timer0_clockevent.mult = + div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); + timer0_clockevent.max_delta_ns = + clockevent_delta2ns(0xffffffff, &timer0_clockevent); + timer0_clockevent.min_delta_ns = + clockevent_delta2ns(0xf, &timer0_clockevent); + + clockevents_register_device(&timer0_clockevent); } /* @@ -530,15 +533,12 @@ static unsigned long realview_gettimeoffset(void) */ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) { - // ...clear the interrupt + struct clock_event_device *evt = &timer0_clockevent; + + /* clear the interrupt */ writel(1, TIMER0_VA_BASE + TIMER_INTCLR); - timer_tick(); - -#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS) - smp_send_timer(); - update_process_times(user_mode(get_irq_regs())); -#endif + evt->event_handler(evt); return IRQ_HANDLED; } @@ -549,13 +549,49 @@ static struct irqaction realview_timer_irq = { .handler = realview_timer_interrupt, }; +static cycle_t realview_get_cycles(void) +{ + return ~readl(TIMER3_VA_BASE + TIMER_VALUE); +} + +static struct clocksource clocksource_realview = { + .name = "timer3", + .rating = 200, + .read = realview_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init realview_clocksource_init(void) +{ + /* setup timer 0 as free-running clocksource */ + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); + writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); + writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, + TIMER3_VA_BASE + TIMER_CTRL); + + clocksource_realview.mult = + clocksource_khz2mult(1000, clocksource_realview.shift); + clocksource_register(&clocksource_realview); +} + /* - * Set up timer interrupt, and return the current time in seconds. + * Set up the clock source and clock events devices */ -static void __init realview_timer_init(void) +void __init realview_timer_init(unsigned int timer_irq) { u32 val; +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST + /* + * The dummy clock device has to be registered before the main device + * so that the latter will broadcast the clock events + */ + local_timer_setup(smp_processor_id()); +#endif + /* * set clock frequency: * REALVIEW_REFCLK is 32KHz @@ -576,18 +612,11 @@ static void __init realview_timer_init(void) writel(0, TIMER2_VA_BASE + TIMER_CTRL); writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); - writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | - TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); - /* * Make irqs happen for the system timer */ - setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq); -} + setup_irq(timer_irq, &realview_timer_irq); -struct sys_timer realview_timer = { - .init = realview_timer_init, - .offset = realview_gettimeoffset, -}; + realview_clocksource_init(); + realview_clockevents_init(timer_irq); +} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 2b53420f9c1b..492a14c0d604 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -27,8 +27,6 @@ #include <asm/leds.h> #include <asm/io.h> -extern struct sys_timer realview_timer; - #define AMBA_DEVICE(name,busid,base,plat) \ static struct amba_device name##_device = { \ .dev = { \ @@ -38,7 +36,7 @@ static struct amba_device name##_device = { \ }, \ .res = { \ .start = REALVIEW_##base##_BASE, \ - .end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\ + .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ .flags = IORESOURCE_MEM, \ }, \ .dma_mask = ~0, \ @@ -46,74 +44,19 @@ static struct amba_device name##_device = { \ /* .dma = base##_DMA,*/ \ } -/* - * These devices are connected via the core APB bridge - */ -#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } -#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } - -#define AACI_IRQ { IRQ_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } -#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } -#define KMI0_IRQ { IRQ_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } -#define KMI1_IRQ { IRQ_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } - -/* - * These devices are connected directly to the multi-layer AHB switch - */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } -#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define CLCD_DMA { 0, 0 } -#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } -#define DMAC_DMA { 0, 0 } - -/* - * These devices are connected via the core APB bridge - */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } -#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } -#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } -#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } -#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } -#define RTC_DMA { 0, 0 } - -/* - * These devices are connected via the DMA APB bridge - */ -#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define SCI_DMA { 7, 6 } -#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART0_DMA { 15, 14 } -#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART1_DMA { 13, 12 } -#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define UART2_DMA { 11, 10 } -#define UART3_IRQ { IRQ_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } -#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } -#define SSP_DMA { 9, 8 } - - extern struct platform_device realview_flash_device; -extern struct platform_device realview_smc91x_device; extern struct platform_device realview_i2c_device; extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clk realview_clcd_clk; extern struct clcd_board clcd_plat_data; +extern void __iomem *gic_cpu_base_addr; +#ifdef CONFIG_LOCAL_TIMERS +extern void __iomem *twd_base_addr; +extern unsigned int twd_size; +#endif extern void realview_leds_event(led_event_t ledevt); +extern void realview_timer_init(unsigned int timer_irq); #endif diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index c7bdf04ab094..50604360479f 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -14,19 +14,75 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/jiffies.h> +#include <linux/percpu.h> +#include <linux/clockchips.h> +#include <linux/irq.h> -#include <asm/mach/time.h> #include <asm/hardware/arm_twd.h> #include <asm/hardware/gic.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> -#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ - ((cpu) * REALVIEW_TWD_SIZE)) +static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); + +/* + * Used on SMP for either the local timer or IPI_TIMER + */ +void local_timer_interrupt(void) +{ + struct clock_event_device *clk = &__get_cpu_var(local_clockevent); + + clk->event_handler(clk); +} + +#ifdef CONFIG_LOCAL_TIMERS + +#define TWD_BASE(cpu) (twd_base_addr + (cpu) * twd_size) + +/* set up by the platform code */ +void __iomem *twd_base_addr; +unsigned int twd_size; static unsigned long mpcore_timer_rate; +static void local_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + void __iomem *base = TWD_BASE(smp_processor_id()); + unsigned long ctrl; + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* timer load already set up */ + ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE + | TWD_TIMER_CONTROL_PERIODIC; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + __raw_writel(ctrl, base + TWD_TIMER_CONTROL); +} + +static int local_timer_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + void __iomem *base = TWD_BASE(smp_processor_id()); + unsigned long ctrl = __raw_readl(base + TWD_TIMER_CONTROL); + + __raw_writel(evt, base + TWD_TIMER_COUNTER); + __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, base + TWD_TIMER_CONTROL); + + return 0; +} + /* * local_timer_ack: checks for a local timer interrupt. * @@ -45,12 +101,11 @@ int local_timer_ack(void) return 0; } -void __cpuinit local_timer_setup(unsigned int cpu) +static void __cpuinit twd_calibrate_rate(unsigned int cpu) { void __iomem *base = TWD_BASE(cpu); - unsigned int load, offset; + unsigned long load, count; u64 waitjiffies; - unsigned int count; /* * If this is the first time round, we need to work out how fast @@ -88,36 +143,36 @@ void __cpuinit local_timer_setup(unsigned int cpu) load = mpcore_timer_rate / HZ; __raw_writel(load, base + TWD_TIMER_LOAD); - __raw_writel(0x7, base + TWD_TIMER_CONTROL); - - /* - * Now maneuver our local tick into the right part of the jiffy. - * Start by working out where within the tick our local timer - * interrupt should go. - */ - offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1); - - /* - * gettimeoffset() will return a number of us since the last tick. - * Convert this number of us to a local timer tick count. - * Be careful of integer overflow whilst keeping maximum precision. - * - * with HZ=100 and 1MHz (fpga) ~ 1GHz processor: - * load = 1 ~ 10,000 - * mpcore_timer_rate/10000 = 100 ~ 100,000 - * - * so the multiply value will be less than 10^9 always. - */ - load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100; - - /* Add on our offset to get the load value */ - load = (load + offset) % (mpcore_timer_rate / HZ); +} - __raw_writel(load, base + TWD_TIMER_COUNTER); +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(unsigned int cpu) +{ + struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); + unsigned long flags; + + twd_calibrate_rate(cpu); + + clk->name = "local_timer"; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->rating = 350; + clk->set_mode = local_timer_set_mode; + clk->set_next_event = local_timer_set_next_event; + clk->irq = IRQ_LOCALTIMER; + clk->cpumask = cpumask_of_cpu(cpu); + clk->shift = 20; + clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift); + clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); + clk->min_delta_ns = clockevent_delta2ns(0xf, clk); /* Make sure our local interrupt controller has this enabled */ - __raw_writel(1 << IRQ_LOCALTIMER, - __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET); + local_irq_save(flags); + get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER); + local_irq_restore(flags); + + clockevents_register_device(clk); } /* @@ -127,3 +182,26 @@ void __cpuexit local_timer_stop(unsigned int cpu) { __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL); } + +#else /* CONFIG_LOCAL_TIMERS */ + +static void dummy_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ +} + +void __cpuinit local_timer_setup(unsigned int cpu) +{ + struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); + + clk->name = "dummy_timer"; + clk->features = CLOCK_EVT_FEAT_DUMMY; + clk->rating = 200; + clk->set_mode = dummy_timer_set_mode; + clk->broadcast = smp_timer_broadcast; + clk->cpumask = cpumask_of_cpu(cpu); + + clockevents_register_device(clk); +} + +#endif /* !CONFIG_LOCAL_TIMERS */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index fce3596f9950..de2b7159557d 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -18,6 +18,7 @@ #include <asm/hardware/arm_scu.h> #include <asm/hardware.h> #include <asm/io.h> +#include <asm/mach-types.h> extern void realview_secondary_startup(void); @@ -31,9 +32,13 @@ static unsigned int __init get_core_count(void) { unsigned int ncores; - ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); + if (machine_is_realview_eb() && core_tile_eb11mp()) { + ncores = __raw_readl(__io_address(REALVIEW_EB11MP_SCU_BASE) + SCU_CONFIG); + ncores = (ncores & 0x03) + 1; + } else + ncores = 1; - return (ncores & 0x03) + 1; + return ncores; } static DEFINE_SPINLOCK(boot_lock); @@ -52,7 +57,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE)); + gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -187,10 +192,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; +#ifdef CONFIG_LOCAL_TIMERS /* - * Enable the local timer for primary CPU + * Enable the local timer for primary CPU. If the device is + * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in + * realview_timer_init */ - local_timer_setup(cpu); + if (machine_is_realview_eb() && core_tile_eb11mp()) + local_timer_setup(cpu); +#endif /* * Initialise the present map, which describes the set of CPUs diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index ecec2f85c4cd..60d9eb810246 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -36,7 +36,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/mmc.h> +#include <asm/mach/time.h> +#include <asm/arch/board-eb.h> #include <asm/arch/irqs.h> #include "core.h" @@ -58,26 +60,7 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, - }, -#ifdef CONFIG_REALVIEW_MPCORE - { - .virtual = IO_ADDRESS(REALVIEW_GIC1_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC1_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_GIC1_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC1_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_MPCORE_L220_BASE), - .pfn = __phys_to_pfn(REALVIEW_MPCORE_L220_BASE), - .length = SZ_8K, - .type = MT_DEVICE, - }, -#endif - { .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), .length = SZ_4K, @@ -103,11 +86,95 @@ static struct map_desc realview_eb_io_desc[] __initdata = { #endif }; +static struct map_desc realview_eb11mp_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + } +}; + static void __init realview_eb_map_io(void) { iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); + if (core_tile_eb11mp()) + iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc)); } +/* + * RealView EB AMBA devices + */ + +/* + * These devices are connected via the core APB bridge + */ +#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } + +#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } + +/* + * These devices are connected directly to the multi-layer AHB switch + */ +#define SMC_IRQ { NO_IRQ, NO_IRQ } +#define SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } +#define CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } +#define DMAC_DMA { 0, 0 } + +/* + * These devices are connected via the core APB bridge + */ +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } +#define WATCHDOG_DMA { 0, 0 } +#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } +#define GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define RTC_DMA { 0, 0 } + +/* + * These devices are connected via the DMA APB bridge + */ +#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define UART0_IRQ { IRQ_EB_UART0, NO_IRQ } +#define UART0_DMA { 15, 14 } +#define UART1_IRQ { IRQ_EB_UART1, NO_IRQ } +#define UART1_DMA { 13, 12 } +#define UART2_IRQ { IRQ_EB_UART2, NO_IRQ } +#define UART2_DMA { 11, 10 } +#define UART3_IRQ { IRQ_EB_UART3, NO_IRQ } +#define UART3_DMA { 0x86, 0x87 } +#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define SSP_DMA { 9, 8 } + /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); @@ -153,38 +220,127 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; +/* + * RealView EB platform devices + */ + +static struct resource realview_eb_smc91x_resources[] = { + [0] = { + .start = REALVIEW_ETH_BASE, + .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EB_ETH, + .end = IRQ_EB_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_eb_smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_eb_smc91x_resources), + .resource = realview_eb_smc91x_resources, +}; + static void __init gic_init_irq(void) { -#ifdef CONFIG_REALVIEW_MPCORE - unsigned int pldctrl; - writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); - pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1); - pldctrl |= 0x00800000; /* New irq mode */ - writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1); - writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); + if (core_tile_eb11mp()) { + unsigned int pldctrl; + + /* new irq mode */ + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); + pldctrl |= 0x00800000; + writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); + + /* core tile GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29); + gic_cpu_init(0, gic_cpu_base_addr); + +#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB + /* board GIC, secondary */ + gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64); + gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE)); + gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif - gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); - gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE)); -#if defined(CONFIG_REALVIEW_MPCORE) && !defined(CONFIG_REALVIEW_MPCORE_REVB) - gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64); - gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE)); - gic_cascade_irq(1, IRQ_EB_IRQ1); + } else { + /* board GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); + gic_cpu_init(0, gic_cpu_base_addr); + } +} + +/* + * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile + */ +static void realview_eb11mp_fixup(void) +{ + /* AMBA devices */ + dmac_device.irq[0] = IRQ_EB11MP_DMA; + uart0_device.irq[0] = IRQ_EB11MP_UART0; + uart1_device.irq[0] = IRQ_EB11MP_UART1; + uart2_device.irq[0] = IRQ_EB11MP_UART2; + uart3_device.irq[0] = IRQ_EB11MP_UART3; + clcd_device.irq[0] = IRQ_EB11MP_CLCD; + wdog_device.irq[0] = IRQ_EB11MP_WDOG; + gpio0_device.irq[0] = IRQ_EB11MP_GPIO0; + gpio1_device.irq[0] = IRQ_EB11MP_GPIO1; + gpio2_device.irq[0] = IRQ_EB11MP_GPIO2; + rtc_device.irq[0] = IRQ_EB11MP_RTC; + sci0_device.irq[0] = IRQ_EB11MP_SCI; + ssp0_device.irq[0] = IRQ_EB11MP_SSP; + aaci_device.irq[0] = IRQ_EB11MP_AACI; + mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A; + mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B; + kmi0_device.irq[0] = IRQ_EB11MP_KMI0; + kmi1_device.irq[0] = IRQ_EB11MP_KMI1; + + /* platform devices */ + realview_eb_smc91x_resources[1].start = IRQ_EB11MP_ETH; + realview_eb_smc91x_resources[1].end = IRQ_EB11MP_ETH; +} + +static void __init realview_eb_timer_init(void) +{ + unsigned int timer_irq; + + if (core_tile_eb11mp()) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE); + twd_size = REALVIEW_EB11MP_TWD_SIZE; #endif + timer_irq = IRQ_EB11MP_TIMER0_1; + } else + timer_irq = IRQ_EB_TIMER0_1; + + realview_timer_init(timer_irq); } +static struct sys_timer realview_eb_timer = { + .init = realview_eb_timer_init, +}; + static void __init realview_eb_init(void) { int i; -#ifdef CONFIG_REALVIEW_MPCORE - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ - l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff); -#endif + if (core_tile_eb11mp()) { + realview_eb11mp_fixup(); + + /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled + * Bits: .... ...0 0111 1001 0000 .... .... .... */ + l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); + } + clk_register(&realview_clcd_clk); platform_device_register(&realview_flash_device); - platform_device_register(&realview_smc91x_device); + platform_device_register(&realview_eb_smc91x_device); platform_device_register(&realview_i2c_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -204,6 +360,6 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .boot_params = 0x00000100, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, - .timer = &realview_timer, + .timer = &realview_eb_timer, .init_machine = realview_eb_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 9e13c8358ea7..5c84c604ed86 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -470,7 +470,7 @@ void __init sa1110_mb_disable(void) * If the system is going to use the SA-1111 DMA engines, set up * the memory bus request/grant pins. */ -void __init sa1110_mb_enable(void) +void __devinit sa1110_mb_enable(void) { unsigned long flags; diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index ba3d21d8fba3..6fe481ff4fdf 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -57,8 +57,6 @@ unsigned long iop_gettimeoffset(void) static irqreturn_t iop_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - write_tisr(1); while ((signed long)(next_jiffy_time - read_tcr1()) @@ -67,8 +65,6 @@ iop_timer_interrupt(int irq, void *dev_id) next_jiffy_time -= ticks_per_jiffy; } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index 2ec1daaa0e53..766473b3f98b 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -130,9 +130,7 @@ static unsigned long s3c2410_gettimeoffset (void) static irqreturn_t s3c2410_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c index af485ae38602..6284c35dabc6 100644 --- a/drivers/pcmcia/sa1100_jornada720.c +++ b/drivers/pcmcia/sa1100_jornada720.c @@ -101,7 +101,7 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = { .socket_suspend = sa1111_pcmcia_socket_suspend, }; -int __init pcmcia_jornada720_init(struct device *dev) +int __devinit pcmcia_jornada720_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 6a48dfa1efe8..0276471cb25e 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -237,6 +237,12 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); + if (port->info && port->info->tty) { + struct tty_struct *tty = port->info->tty; + unsigned int b = port->uartclk / (16 * quot); + tty_encode_baud_rate(tty, b, b); + } + switch (termios->c_cflag & CSIZE) { case CS5: h_lcr = 0x00; @@ -277,8 +283,6 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_iflag & INPCK) port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; - tty_encode_baud_rate(tty, baud, baud); - /* * Which character status flags should we ignore? */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 111da57f5334..60f52904aad0 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -34,6 +34,7 @@ #include <linux/tty_flip.h> #include <linux/platform_device.h> #include <linux/atmel_pdc.h> +#include <linux/atmel_serial.h> #include <asm/io.h> @@ -45,8 +46,6 @@ #include <asm/arch/gpio.h> #endif -#include "atmel_serial.h" - #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index c2e11cc374ba..1551fc24eb43 100644 --- a/include/asm-arm/arch-at91/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -89,7 +89,7 @@ #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ #define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */ +#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ #define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h index 802891a9cd81..e8fc0b1c33f4 100644 --- a/include/asm-arm/arch-at91/at91rm9200.h +++ b/include/asm-arm/arch-at91/at91rm9200.h @@ -93,6 +93,11 @@ #define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ #define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ +#define AT91_USART0 AT91RM9200_BASE_US0 +#define AT91_USART1 AT91RM9200_BASE_US1 +#define AT91_USART2 AT91RM9200_BASE_US2 +#define AT91_USART3 AT91RM9200_BASE_US3 + #define AT91_MATRIX 0 /* not supported */ /* diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h index 0427f8698c07..c8934fe34dc5 100644 --- a/include/asm-arm/arch-at91/at91sam9260.h +++ b/include/asm-arm/arch-at91/at91sam9260.h @@ -99,6 +99,13 @@ #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_USART0 AT91SAM9260_BASE_US0 +#define AT91_USART1 AT91SAM9260_BASE_US1 +#define AT91_USART2 AT91SAM9260_BASE_US2 +#define AT91_USART3 AT91SAM9260_BASE_US3 +#define AT91_USART4 AT91SAM9260_BASE_US4 +#define AT91_USART5 AT91SAM9260_BASE_US5 + /* * Internal Memory. diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h index 9eb459570330..c7c4778dac49 100644 --- a/include/asm-arm/arch-at91/at91sam9261.h +++ b/include/asm-arm/arch-at91/at91sam9261.h @@ -84,6 +84,10 @@ #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) +#define AT91_USART0 AT91SAM9261_BASE_US0 +#define AT91_USART1 AT91SAM9261_BASE_US1 +#define AT91_USART2 AT91SAM9261_BASE_US2 + /* * Internal Memory. diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h index 115c47ac7ebb..018a647311da 100644 --- a/include/asm-arm/arch-at91/at91sam9263.h +++ b/include/asm-arm/arch-at91/at91sam9263.h @@ -101,6 +101,10 @@ #define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_USART0 AT91SAM9263_BASE_US0 +#define AT91_USART1 AT91SAM9263_BASE_US1 +#define AT91_USART2 AT91SAM9263_BASE_US2 + #define AT91_SMC AT91_SMC0 /* diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h index 8a9708a370c6..16d2832f6c0a 100644 --- a/include/asm-arm/arch-at91/at91sam9rl.h +++ b/include/asm-arm/arch-at91/at91sam9rl.h @@ -94,6 +94,11 @@ #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) +#define AT91_USART0 AT91SAM9RL_BASE_US0 +#define AT91_USART1 AT91SAM9RL_BASE_US1 +#define AT91_USART2 AT91SAM9RL_BASE_US2 +#define AT91_USART3 AT91SAM9RL_BASE_US3 + /* * Internal Memory. diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h index 272a7e0dc6cf..f5636a8f6132 100644 --- a/include/asm-arm/arch-at91/uncompress.h +++ b/include/asm-arm/arch-at91/uncompress.h @@ -22,7 +22,23 @@ #define __ASM_ARCH_UNCOMPRESS_H #include <asm/io.h> -#include <asm/arch/at91_dbgu.h> +#include <linux/atmel_serial.h> + +#if defined(CONFIG_AT91_EARLY_DBGU) +#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) +#elif defined(CONFIG_AT91_EARLY_USART0) +#define UART_OFFSET AT91_USART0 +#elif defined(CONFIG_AT91_EARLY_USART1) +#define UART_OFFSET AT91_USART1 +#elif defined(CONFIG_AT91_EARLY_USART2) +#define UART_OFFSET AT91_USART2 +#elif defined(CONFIG_AT91_EARLY_USART3) +#define UART_OFFSET AT91_USART3 +#elif defined(CONFIG_AT91_EARLY_USART4) +#define UART_OFFSET AT91_USART4 +#elif defined(CONFIG_AT91_EARLY_USART5) +#define UART_OFFSET AT91_USART5 +#endif /* * The following code assumes the serial port has already been @@ -33,22 +49,22 @@ */ static void putc(int c) { -#ifdef AT91_DBGU - void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ +#ifdef UART_OFFSET + void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) + while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) barrier(); - __raw_writel(c, sys + AT91_DBGU_THR); + __raw_writel(c, sys + ATMEL_US_THR); #endif } static inline void flush(void) { -#ifdef AT91_DBGU - void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ +#ifdef UART_OFFSET + void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ /* wait for transmission to complete */ - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) + while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) barrier(); #endif } diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h index d2523b326c6c..2fa3d6b8dbb8 100644 --- a/include/asm-arm/arch-ixp4xx/cpu.h +++ b/include/asm-arm/arch-ixp4xx/cpu.h @@ -28,4 +28,19 @@ extern unsigned int processor_id; #define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ IXP465_PROCESSOR_ID_VALUE) +static inline u32 ixp4xx_read_feature_bits(void) +{ + unsigned int val = ~*IXP4XX_EXP_CFG2; + val &= ~IXP4XX_FEATURE_RESERVED; + if (!cpu_is_ixp46x()) + val &= ~IXP4XX_FEATURE_IXP46X_ONLY; + + return val; +} + +static inline void ixp4xx_write_feature_bits(u32 value) +{ + *IXP4XX_EXP_CFG2 = ~value; +} + #endif /* _ASM_ARCH_CPU_H */ diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h index a19605ad240d..b7673e171abe 100644 --- a/include/asm-arm/arch-ixp4xx/dsmg600.h +++ b/include/asm-arm/arch-ixp4xx/dsmg600.h @@ -40,18 +40,13 @@ /* Buttons */ #define DSMG600_PB_GPIO 15 /* power button */ -#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO) - #define DSMG600_RB_GPIO 3 /* reset button */ -#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3 +/* Power control */ #define DSMG600_PO_GPIO 2 /* power off */ /* LEDs */ #define DSMG600_LED_PWR_GPIO 0 -#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO) - #define DSMG600_LED_WLAN_GPIO 14 -#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO) diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index 297ceda08b61..73e8dc36f6a4 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -27,13 +27,13 @@ #define pcibios_assign_all_busses() 1 +/* Register locations and bits */ +#include "ixp4xx-regs.h" + #ifndef __ASSEMBLER__ #include <asm/arch/cpu.h> #endif -/* Register locations and bits */ -#include "ixp4xx-regs.h" - /* Platform helper functions and definitions */ #include "platform.h" diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index 9c5d2357aff3..de181ce958db 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <linux/bitops.h> + #include <asm/hardware.h> #define IO_SPACE_LIMIT 0xffff0000 diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h index 5d949d763a91..c704fe8cf42f 100644 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h @@ -15,10 +15,6 @@ * */ -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <asm/hardware.h>" -#endif - #ifndef _ASM_ARM_IXP4XX_H_ #define _ASM_ARM_IXP4XX_H_ @@ -607,4 +603,36 @@ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ +/* "fuse" bits of IXP_EXP_CFG2 */ +#define IXP4XX_FEATURE_RCOMP (1 << 0) +#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) +#define IXP4XX_FEATURE_HASH (1 << 2) +#define IXP4XX_FEATURE_AES (1 << 3) +#define IXP4XX_FEATURE_DES (1 << 4) +#define IXP4XX_FEATURE_HDLC (1 << 5) +#define IXP4XX_FEATURE_AAL (1 << 6) +#define IXP4XX_FEATURE_HSS (1 << 7) +#define IXP4XX_FEATURE_UTOPIA (1 << 8) +#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) +#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) +#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) +#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) +#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) +#define IXP4XX_FEATURE_PCI (1 << 14) +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) +#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) +#define IXP4XX_FEATURE_USB_HOST (1 << 18) +#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) +#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) +#define IXP4XX_FEATURE_RSA (1 << 21) +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) +#define IXP4XX_FEATURE_RESERVED (0xFF << 24) + +#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \ + IXP4XX_FEATURE_USB_HOST | \ + IXP4XX_FEATURE_NPEA_ETH | \ + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ + IXP4XX_FEATURE_RSA | \ + IXP4XX_FEATURE_XSCALE_MAX_FREQ) + #endif diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index 131e0a1d0df3..98d937897bce 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -38,15 +38,15 @@ /* Buttons */ -#define NAS100D_PB_GPIO 14 -#define NAS100D_RB_GPIO 4 +#define NAS100D_PB_GPIO 14 /* power button */ +#define NAS100D_RB_GPIO 4 /* reset button */ + +/* Power control */ + #define NAS100D_PO_GPIO 12 /* power off */ -#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 -#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 +/* LEDs */ -/* -#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO) -#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO) -#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO) -*/ +#define NAS100D_LED_WLAN_GPIO 0 +#define NAS100D_LED_DISK_GPIO 3 +#define NAS100D_LED_PWR_GPIO 15 diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h new file mode 100644 index 000000000000..37d0511689dc --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/npe.h @@ -0,0 +1,39 @@ +#ifndef __IXP4XX_NPE_H +#define __IXP4XX_NPE_H + +#include <linux/kernel.h> + +extern const char *npe_names[]; + +struct npe_regs { + u32 exec_addr, exec_data, exec_status_cmd, exec_count; + u32 action_points[4]; + u32 watchpoint_fifo, watch_count; + u32 profile_count; + u32 messaging_status, messaging_control; + u32 mailbox_status, /*messaging_*/ in_out_fifo; +}; + +struct npe { + struct resource *mem_res; + struct npe_regs __iomem *regs; + u32 regs_phys; + int id; + int valid; +}; + + +static inline const char *npe_name(struct npe *npe) +{ + return npe_names[npe->id]; +} + +int npe_running(struct npe *npe); +int npe_send_message(struct npe *npe, const void *msg, const char *what); +int npe_recv_message(struct npe *npe, void *msg, const char *what); +int npe_send_recv_message(struct npe *npe, void *msg, const char *what); +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); +struct npe *npe_request(int id); +void npe_release(struct npe *npe); + +#endif /* __IXP4XX_NPE_H */ diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index 850fdc5b45da..714bbc65126a 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -39,34 +39,17 @@ /* Buttons */ -#define NSLU2_PB_GPIO 5 +#define NSLU2_PB_GPIO 5 /* power button */ #define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 - -#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 -#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 - -#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO) -#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO) -#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO) +#define NSLU2_RB_GPIO 12 /* reset button */ /* Buzzer */ #define NSLU2_GPIO_BUZZ 4 -#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) /* LEDs */ #define NSLU2_LED_RED_GPIO 0 #define NSLU2_LED_GRN_GPIO 1 - -#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) -#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) - #define NSLU2_LED_DISK1_GPIO 3 #define NSLU2_LED_DISK2_GPIO 2 - -#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) -#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) - - diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 2ce28e3fd325..a1f2b5404db1 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -91,6 +91,27 @@ struct ixp4xx_pata_data { struct sys_timer; +#define IXP4XX_ETH_NPEA 0x00 +#define IXP4XX_ETH_NPEB 0x10 +#define IXP4XX_ETH_NPEC 0x20 + +/* Information about built-in Ethernet MAC interfaces */ +struct eth_plat_info { + u8 phy; /* MII PHY ID, 0 - 31 */ + u8 rxq; /* configurable, currently 0 - 31 only */ + u8 txreadyq; + u8 hwaddr[6]; +}; + +/* Information about built-in HSS (synchronous serial) interfaces */ +struct hss_plat_info { + int (*set_clock)(int port, unsigned int clock_type); + int (*open)(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)); + void (*close)(int port, void *pdev); + u8 txreadyq; +}; + /* * Frequency of clock used for primary clocksource */ diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h new file mode 100644 index 000000000000..1e52b95cede5 --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/qmgr.h @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef IXP4XX_QMGR_H +#define IXP4XX_QMGR_H + +#include <linux/io.h> +#include <linux/kernel.h> + +#define HALF_QUEUES 32 +#define QUEUES 64 /* only 32 lower queues currently supported */ +#define MAX_QUEUE_LENGTH 4 /* in dwords */ + +#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ +#define QUEUE_STAT1_NEARLY_EMPTY 2 +#define QUEUE_STAT1_NEARLY_FULL 4 +#define QUEUE_STAT1_FULL 8 +#define QUEUE_STAT2_UNDERFLOW 1 +#define QUEUE_STAT2_OVERFLOW 2 + +#define QUEUE_WATERMARK_0_ENTRIES 0 +#define QUEUE_WATERMARK_1_ENTRY 1 +#define QUEUE_WATERMARK_2_ENTRIES 2 +#define QUEUE_WATERMARK_4_ENTRIES 3 +#define QUEUE_WATERMARK_8_ENTRIES 4 +#define QUEUE_WATERMARK_16_ENTRIES 5 +#define QUEUE_WATERMARK_32_ENTRIES 6 +#define QUEUE_WATERMARK_64_ENTRIES 7 + +/* queue interrupt request conditions */ +#define QUEUE_IRQ_SRC_EMPTY 0 +#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 +#define QUEUE_IRQ_SRC_NEARLY_FULL 2 +#define QUEUE_IRQ_SRC_FULL 3 +#define QUEUE_IRQ_SRC_NOT_EMPTY 4 +#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 +#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 +#define QUEUE_IRQ_SRC_NOT_FULL 7 + +struct qmgr_regs { + u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ + u32 stat1[4]; /* 0x400 - 0x40F */ + u32 stat2[2]; /* 0x410 - 0x417 */ + u32 statne_h; /* 0x418 - queue nearly empty */ + u32 statf_h; /* 0x41C - queue full */ + u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ + u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ + u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ + u32 reserved[1776]; + u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ +}; + +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev); +void qmgr_enable_irq(unsigned int queue); +void qmgr_disable_irq(unsigned int queue); + +/* request_ and release_queue() must be called from non-IRQ context */ +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark); +void qmgr_release_queue(unsigned int queue); + + +static inline void qmgr_put_entry(unsigned int queue, u32 val) +{ + extern struct qmgr_regs __iomem *qmgr_regs; + __raw_writel(val, &qmgr_regs->acc[queue][0]); +} + +static inline u32 qmgr_get_entry(unsigned int queue) +{ + extern struct qmgr_regs __iomem *qmgr_regs; + return __raw_readl(&qmgr_regs->acc[queue][0]); +} + +static inline int qmgr_get_stat1(unsigned int queue) +{ + extern struct qmgr_regs __iomem *qmgr_regs; + return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) + >> ((queue & 7) << 2)) & 0xF; +} + +static inline int qmgr_get_stat2(unsigned int queue) +{ + extern struct qmgr_regs __iomem *qmgr_regs; + return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) + >> ((queue & 0xF) << 1)) & 0x3; +} + +static inline int qmgr_stat_empty(unsigned int queue) +{ + return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); +} + +static inline int qmgr_stat_nearly_empty(unsigned int queue) +{ + return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); +} + +static inline int qmgr_stat_nearly_full(unsigned int queue) +{ + return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); +} + +static inline int qmgr_stat_full(unsigned int queue) +{ + return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); +} + +static inline int qmgr_stat_underflow(unsigned int queue) +{ + return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); +} + +static inline int qmgr_stat_overflow(unsigned int queue) +{ + return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); +} + +#endif diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h index f7a35b78823f..34ef48fe327e 100644 --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h @@ -13,7 +13,7 @@ #ifndef _ARCH_UNCOMPRESS_H_ #define _ARCH_UNCOMPRESS_H_ -#include <asm/hardware.h> +#include "ixp4xx-regs.h" #include <asm/mach-types.h> #include <linux/serial_reg.h> diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h new file mode 100644 index 000000000000..3e437b7f425a --- /dev/null +++ b/include/asm-arm/arch-realview/board-eb.h @@ -0,0 +1,171 @@ +/* + * include/asm-arm/arch-realview/board-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_EB_H +#define __ASM_ARCH_BOARD_EB_H + +#include <asm/arch/platform.h> + +/* + * RealView EB + ARM11MPCore peripheral addresses + */ +#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB +#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE 0x10100700 +#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ +#else +#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 +#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ +#endif + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +#define IRQ_EB11MP_UART2 -1 +#define IRQ_EB11MP_UART3 -1 +#define IRQ_EB11MP_CLCD -1 +#define IRQ_EB11MP_DMA -1 +#define IRQ_EB11MP_WDOG -1 +#define IRQ_EB11MP_GPIO0 -1 +#define IRQ_EB11MP_GPIO1 -1 +#define IRQ_EB11MP_GPIO2 -1 +#define IRQ_EB11MP_SCI -1 +#define IRQ_EB11MP_SSP -1 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_EB_PROC_MASK 0xFF000000 +#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_EB_PROC_ARM9 0x02000000 +#define REALVIEW_EB_PROC_ARM11 0x04000000 +#define REALVIEW_EB_PROC_ARM11MP 0x06000000 + +#define check_eb_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_REALVIEW_EB_ARM11MP +#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) +#else +#define core_tile_eb11mp() 0 +#endif + +#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S index 3b4e2076603a..cd26306d8e57 100644 --- a/include/asm-arm/arch-realview/entry-macro.S +++ b/include/asm-arm/arch-realview/entry-macro.S @@ -14,7 +14,8 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE) + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index aa78fe087ab2..bad8d7ce9bfe 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <asm/arch/platform.h> /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000) diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h index 5a5db56f86b8..ad0c911002fc 100644 --- a/include/asm-arm/arch-realview/irqs.h +++ b/include/asm-arm/arch-realview/irqs.h @@ -19,103 +19,18 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <asm/arch/platform.h> +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 +#include <asm/arch/board-eb.h> -/* - * IRQ interrupts definitions are the same the INT definitions - * held within platform.h - */ -#define IRQ_GIC_START 32 -#define IRQ_WDOGINT (IRQ_GIC_START + INT_WDOGINT) -#define IRQ_SOFTINT (IRQ_GIC_START + INT_SOFTINT) -#define IRQ_COMMRx (IRQ_GIC_START + INT_COMMRx) -#define IRQ_COMMTx (IRQ_GIC_START + INT_COMMTx) -#define IRQ_TIMERINT0_1 (IRQ_GIC_START + INT_TIMERINT0_1) -#define IRQ_TIMERINT2_3 (IRQ_GIC_START + INT_TIMERINT2_3) -#define IRQ_GPIOINT0 (IRQ_GIC_START + INT_GPIOINT0) -#define IRQ_GPIOINT1 (IRQ_GIC_START + INT_GPIOINT1) -#define IRQ_GPIOINT2 (IRQ_GIC_START + INT_GPIOINT2) -#define IRQ_GPIOINT3 (IRQ_GIC_START + INT_GPIOINT3) -#define IRQ_RTCINT (IRQ_GIC_START + INT_RTCINT) -#define IRQ_SSPINT (IRQ_GIC_START + INT_SSPINT) -#define IRQ_UARTINT0 (IRQ_GIC_START + INT_UARTINT0) -#define IRQ_UARTINT1 (IRQ_GIC_START + INT_UARTINT1) -#define IRQ_UARTINT2 (IRQ_GIC_START + INT_UARTINT2) -#define IRQ_UART3 (IRQ_GIC_START + INT_UARTINT3) -#define IRQ_SCIINT (IRQ_GIC_START + INT_SCIINT) -#define IRQ_CLCDINT (IRQ_GIC_START + INT_CLCDINT) -#define IRQ_DMAINT (IRQ_GIC_START + INT_DMAINT) -#define IRQ_PWRFAILINT (IRQ_GIC_START + INT_PWRFAILINT) -#define IRQ_MBXINT (IRQ_GIC_START + INT_MBXINT) -#define IRQ_GNDINT (IRQ_GIC_START + INT_GNDINT) -#define IRQ_MMCI0B (IRQ_GIC_START + INT_MMCI0B) -#define IRQ_MMCI1B (IRQ_GIC_START + INT_MMCI1B) -#define IRQ_KMI0 (IRQ_GIC_START + INT_KMI0) -#define IRQ_KMI1 (IRQ_GIC_START + INT_KMI1) -#define IRQ_SCI3 (IRQ_GIC_START + INT_SCI3) -#define IRQ_CLCD (IRQ_GIC_START + INT_CLCD) -#define IRQ_TOUCH (IRQ_GIC_START + INT_TOUCH) -#define IRQ_KEYPAD (IRQ_GIC_START + INT_KEYPAD) -#define IRQ_DoC (IRQ_GIC_START + INT_DoC) -#define IRQ_MMCI0A (IRQ_GIC_START + INT_MMCI0A) -#define IRQ_MMCI1A (IRQ_GIC_START + INT_MMCI1A) -#define IRQ_AACI (IRQ_GIC_START + INT_AACI) -#define IRQ_ETH (IRQ_GIC_START + INT_ETH) -#define IRQ_USB (IRQ_GIC_START + INT_USB) -#define IRQ_PMU_CPU0 (IRQ_GIC_START + INT_PMU_CPU0) -#define IRQ_PMU_CPU1 (IRQ_GIC_START + INT_PMU_CPU1) -#define IRQ_PMU_CPU2 (IRQ_GIC_START + INT_PMU_CPU2) -#define IRQ_PMU_CPU3 (IRQ_GIC_START + INT_PMU_CPU3) -#define IRQ_PMU_SCU0 (IRQ_GIC_START + INT_PMU_SCU0) -#define IRQ_PMU_SCU1 (IRQ_GIC_START + INT_PMU_SCU1) -#define IRQ_PMU_SCU2 (IRQ_GIC_START + INT_PMU_SCU2) -#define IRQ_PMU_SCU3 (IRQ_GIC_START + INT_PMU_SCU3) -#define IRQ_PMU_SCU4 (IRQ_GIC_START + INT_PMU_SCU4) -#define IRQ_PMU_SCU5 (IRQ_GIC_START + INT_PMU_SCU5) -#define IRQ_PMU_SCU6 (IRQ_GIC_START + INT_PMU_SCU6) -#define IRQ_PMU_SCU7 (IRQ_GIC_START + INT_PMU_SCU7) +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 -#define IRQ_EB_IRQ1 (IRQ_GIC_START + INT_EB_IRQ1) -#define IRQ_EB_IRQ2 (IRQ_GIC_START + INT_EB_IRQ2) +#define IRQ_GIC_START 32 -#define IRQMASK_WDOGINT INTMASK_WDOGINT -#define IRQMASK_SOFTINT INTMASK_SOFTINT -#define IRQMASK_COMMRx INTMASK_COMMRx -#define IRQMASK_COMMTx INTMASK_COMMTx -#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 -#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 -#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0 -#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1 -#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2 -#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3 -#define IRQMASK_RTCINT INTMASK_RTCINT -#define IRQMASK_SSPINT INTMASK_SSPINT -#define IRQMASK_UARTINT0 INTMASK_UARTINT0 -#define IRQMASK_UARTINT1 INTMASK_UARTINT1 -#define IRQMASK_UARTINT2 INTMASK_UARTINT2 -#define IRQMASK_SCIINT INTMASK_SCIINT -#define IRQMASK_CLCDINT INTMASK_CLCDINT -#define IRQMASK_DMAINT INTMASK_DMAINT -#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT -#define IRQMASK_MBXINT INTMASK_MBXINT -#define IRQMASK_GNDINT INTMASK_GNDINT -#define IRQMASK_MMCI0B INTMASK_MMCI0B -#define IRQMASK_MMCI1B INTMASK_MMCI1B -#define IRQMASK_KMI0 INTMASK_KMI0 -#define IRQMASK_KMI1 INTMASK_KMI1 -#define IRQMASK_SCI3 INTMASK_SCI3 -#define IRQMASK_UART3 INTMASK_UART3 -#define IRQMASK_CLCD INTMASK_CLCD -#define IRQMASK_TOUCH INTMASK_TOUCH -#define IRQMASK_KEYPAD INTMASK_KEYPAD -#define IRQMASK_DoC INTMASK_DoC -#define IRQMASK_MMCI0A INTMASK_MMCI0A -#define IRQMASK_MMCI1A INTMASK_MMCI1A -#define IRQMASK_AACI INTMASK_AACI -#define IRQMASK_ETH INTMASK_ETH -#define IRQMASK_USB INTMASK_USB +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif -#define NR_IRQS (IRQ_GIC_START + 96) +#endif diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h index 6e0eab95a3a2..4fd351b5e4a2 100644 --- a/include/asm-arm/arch-realview/platform.h +++ b/include/asm-arm/arch-realview/platform.h @@ -18,8 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __address_h -#define __address_h 1 +#ifndef __ASM_ARCH_PLATFORM_H +#define __ASM_ARCH_PLATFORM_H /* * Memory definitions @@ -81,11 +81,12 @@ #define REALVIEW_SYS_24MHz_OFFSET 0x5C #define REALVIEW_SYS_MISC_OFFSET 0x60 #define REALVIEW_SYS_IOSEL_OFFSET 0x70 -#define REALVIEW_SYS_TEST_OSC0_OFFSET 0x80 -#define REALVIEW_SYS_TEST_OSC1_OFFSET 0x84 -#define REALVIEW_SYS_TEST_OSC2_OFFSET 0x88 -#define REALVIEW_SYS_TEST_OSC3_OFFSET 0x8C -#define REALVIEW_SYS_TEST_OSC4_OFFSET 0x90 +#define REALVIEW_SYS_PROCID_OFFSET 0x84 +#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 +#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 +#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 +#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC +#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 #define REALVIEW_SYS_BASE 0x10000000 #define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) @@ -114,6 +115,7 @@ #define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) #define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) #define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) +#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) #define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) #define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) #define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) @@ -203,30 +205,8 @@ /* Reserved 0x1001A000 - 0x1001FFFF */ #define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */ #define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ -#ifndef CONFIG_REALVIEW_MPCORE #define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ #define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#else -#ifdef CONFIG_REALVIEW_MPCORE_REVB -#define REALVIEW_MPCORE_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_TWD_BASE 0x10100700 -#define REALVIEW_TWD_SIZE 0x00000100 -#define REALVIEW_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ -#define REALVIEW_MPCORE_L220_BASE 0x10102000 /* L220 registers */ -#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ -#else -#define REALVIEW_MPCORE_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_TWD_BASE 0x1F000700 -#define REALVIEW_TWD_SIZE 0x00000100 -#define REALVIEW_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ -#define REALVIEW_MPCORE_L220_BASE 0x1F002000 /* L220 registers */ -#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ -#endif -#define REALVIEW_GIC1_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_GIC1_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#endif #define REALVIEW_SMC_BASE 0x10080000 /* SMC */ /* Reserved 0x10090000 - 0x100EFFFF */ @@ -283,134 +263,6 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (primary) - * ------------------------------------------------------------------------ - */ -#ifndef CONFIG_REALVIEW_MPCORE -#define INT_WDOGINT 0 /* Watchdog timer */ -#define INT_SOFTINT 1 /* Software interrupt */ -#define INT_COMMRx 2 /* Debug Comm Rx interrupt */ -#define INT_COMMTx 3 /* Debug Comm Tx interrupt */ -#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */ -#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */ -#define INT_GPIOINT0 6 /* GPIO 0 */ -#define INT_GPIOINT1 7 /* GPIO 1 */ -#define INT_GPIOINT2 8 /* GPIO 2 */ -/* 9 reserved */ -#define INT_RTCINT 10 /* Real Time Clock */ -#define INT_SSPINT 11 /* Synchronous Serial Port */ -#define INT_UARTINT0 12 /* UART 0 on development chip */ -#define INT_UARTINT1 13 /* UART 1 on development chip */ -#define INT_UARTINT2 14 /* UART 2 on development chip */ -#define INT_UARTINT3 15 /* UART 3 on development chip */ -#define INT_SCIINT 16 /* Smart Card Interface */ -#define INT_MMCI0A 17 /* Multimedia Card 0A */ -#define INT_MMCI0B 18 /* Multimedia Card 0B */ -#define INT_AACI 19 /* Audio Codec */ -#define INT_KMI0 20 /* Keyboard/Mouse port 0 */ -#define INT_KMI1 21 /* Keyboard/Mouse port 1 */ -#define INT_CHARLCD 22 /* Character LCD */ -#define INT_CLCDINT 23 /* CLCD controller */ -#define INT_DMAINT 24 /* DMA controller */ -#define INT_PWRFAILINT 25 /* Power failure */ -#define INT_PISMO 26 -#define INT_DoC 27 /* Disk on Chip memory controller */ -#define INT_ETH 28 /* Ethernet controller */ -#define INT_USB 29 /* USB controller */ -#define INT_TSPENINT 30 /* Touchscreen pen */ -#define INT_TSKPADINT 31 /* Touchscreen keypad */ - -#else - -#define MAX_GIC_NR 2 - -#define INT_AACI 0 -#define INT_TIMERINT0_1 1 -#define INT_TIMERINT2_3 2 -#define INT_USB 3 -#define INT_UARTINT0 4 -#define INT_UARTINT1 5 -#define INT_RTCINT 6 -#define INT_KMI0 7 -#define INT_KMI1 8 -#define INT_ETH 9 -#define INT_EB_IRQ1 10 /* main GIC */ -#define INT_EB_IRQ2 11 /* tile GIC */ -#define INT_EB_FIQ1 12 /* main GIC */ -#define INT_EB_FIQ2 13 /* tile GIC */ -#define INT_MMCI0A 14 -#define INT_MMCI0B 15 - -#define INT_PMU_CPU0 17 -#define INT_PMU_CPU1 18 -#define INT_PMU_CPU2 19 -#define INT_PMU_CPU3 20 -#define INT_PMU_SCU0 21 -#define INT_PMU_SCU1 22 -#define INT_PMU_SCU2 23 -#define INT_PMU_SCU3 24 -#define INT_PMU_SCU4 25 -#define INT_PMU_SCU5 26 -#define INT_PMU_SCU6 27 -#define INT_PMU_SCU7 28 - -#define INT_L220_EVENT 29 -#define INT_L220_SLAVE 30 -#define INT_L220_DECODE 31 - -#define INT_UARTINT2 -1 -#define INT_UARTINT3 -1 -#define INT_CLCDINT -1 -#define INT_DMAINT -1 -#define INT_WDOGINT -1 -#define INT_GPIOINT0 -1 -#define INT_GPIOINT1 -1 -#define INT_GPIOINT2 -1 -#define INT_SCIINT -1 -#define INT_SSPINT -1 -#endif - -/* - * Interrupt bit positions - * - */ -#define INTMASK_WDOGINT (1 << INT_WDOGINT) -#define INTMASK_SOFTINT (1 << INT_SOFTINT) -#define INTMASK_COMMRx (1 << INT_COMMRx) -#define INTMASK_COMMTx (1 << INT_COMMTx) -#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1) -#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3) -#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0) -#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1) -#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2) -#define INTMASK_RTCINT (1 << INT_RTCINT) -#define INTMASK_SSPINT (1 << INT_SSPINT) -#define INTMASK_UARTINT0 (1 << INT_UARTINT0) -#define INTMASK_UARTINT1 (1 << INT_UARTINT1) -#define INTMASK_UARTINT2 (1 << INT_UARTINT2) -#define INTMASK_UARTINT3 (1 << INT_UARTINT3) -#define INTMASK_SCIINT (1 << INT_SCIINT) -#define INTMASK_MMCI0A (1 << INT_MMCI0A) -#define INTMASK_MMCI0B (1 << INT_MMCI0B) -#define INTMASK_AACI (1 << INT_AACI) -#define INTMASK_KMI0 (1 << INT_KMI0) -#define INTMASK_KMI1 (1 << INT_KMI1) -#define INTMASK_CHARLCD (1 << INT_CHARLCD) -#define INTMASK_CLCDINT (1 << INT_CLCDINT) -#define INTMASK_DMAINT (1 << INT_DMAINT) -#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT) -#define INTMASK_PISMO (1 << INT_PISMO) -#define INTMASK_DoC (1 << INT_DoC) -#define INTMASK_ETH (1 << INT_ETH) -#define INTMASK_USB (1 << INT_USB) -#define INTMASK_TSPENINT (1 << INT_TSPENINT) -#define INTMASK_TSKPADINT (1 << INT_TSKPADINT) - -#define MAXIRQNUM 31 -#define MAXFIQNUM 31 -#define MAXSWINUM 31 - /* * Application Flash * @@ -463,6 +315,4 @@ #define REALVIEW_CSR_BASE 0x10000000 #define REALVIEW_CSR_SIZE 0x10000000 -#endif - -/* END */ +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h index cc293640178e..08b3db883c36 100644 --- a/include/asm-arm/arch-realview/scu.h +++ b/include/asm-arm/arch-realview/scu.h @@ -1,8 +1,8 @@ #ifndef __ASMARM_ARCH_SCU_H #define __ASMARM_ARCH_SCU_H -#include <asm/arch/platform.h> +#include <asm/arch/board-eb.h> -#define SCU_BASE REALVIEW_MPCORE_SCU_BASE +#define SCU_BASE REALVIEW_EB11MP_SCU_BASE #endif diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index f05631d76743..3d5c2db07a26 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -19,6 +19,8 @@ */ #include <asm/hardware.h> +#include <asm/arch/platform.h> + #define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00)) #define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c)) #define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30)) diff --git a/include/asm-arm/hardware/arm_twd.h b/include/asm-arm/hardware/arm_twd.h index 131d5b40e072..e521b70713c8 100644 --- a/include/asm-arm/hardware/arm_twd.h +++ b/include/asm-arm/hardware/arm_twd.h @@ -1,7 +1,7 @@ #ifndef __ASM_HARDWARE_TWD_H #define __ASM_HARDWARE_TWD_H -#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_LOAD 0x00 #define TWD_TIMER_COUNTER 0x04 #define TWD_TIMER_CONTROL 0x08 #define TWD_TIMER_INTSTAT 0x0C @@ -13,4 +13,9 @@ #define TWD_WDOG_RESETSTAT 0x30 #define TWD_WDOG_DISABLE 0x34 +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + #endif diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h index 46dcc4d0b9bd..1ee17b6951d0 100644 --- a/include/asm-arm/kexec.h +++ b/include/asm-arm/kexec.h @@ -16,6 +16,9 @@ #define KEXEC_BOOT_PARAMS_SIZE 1536 +#define KEXEC_ARM_ATAGS_OFFSET 0x1000 +#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 + #ifndef __ASSEMBLY__ struct kimage; diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index f67acce387e7..af99636db400 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -61,6 +61,11 @@ extern void smp_cross_call(cpumask_t callmap); extern void smp_send_timer(void); /* + * Broadcast a clock event to other CPUs. + */ +extern void smp_timer_broadcast(cpumask_t mask); + +/* * Boot a secondary CPU, and assign it the specified idle task. * This also gives us the initial stack to use for this CPU. */ @@ -96,11 +101,12 @@ extern void platform_cpu_die(unsigned int cpu); extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); -#ifdef CONFIG_LOCAL_TIMERS /* - * Setup a local timer interrupt for a CPU. + * Local timer interrupt handling function (can be IPI'ed). */ -extern void local_timer_setup(unsigned int cpu); +extern void local_timer_interrupt(void); + +#ifdef CONFIG_LOCAL_TIMERS /* * Stop a local timer interrupt. @@ -114,10 +120,6 @@ extern int local_timer_ack(void); #else -static inline void local_timer_setup(unsigned int cpu) -{ -} - static inline void local_timer_stop(unsigned int cpu) { } @@ -125,6 +127,11 @@ static inline void local_timer_stop(unsigned int cpu) #endif /* + * Setup a local timer interrupt for a CPU. + */ +extern void local_timer_setup(unsigned int cpu); + +/* * show local interrupt info */ extern void show_local_irqs(struct seq_file *); diff --git a/drivers/serial/atmel_serial.h b/include/linux/atmel_serial.h index e0141776517c..fd6833764d72 100644 --- a/drivers/serial/atmel_serial.h +++ b/include/linux/atmel_serial.h @@ -1,5 +1,5 @@ /* - * drivers/serial/atmel_serial.h + * include/linux/atmel_serial.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People |