diff options
-rw-r--r-- | drivers/ata/Kconfig | 6 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 21 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 5 | ||||
-rw-r--r-- | drivers/ata/pata_marvell.c | 51 | ||||
-rw-r--r-- | drivers/ata/pata_sil680.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_nv.c | 19 |
7 files changed, 65 insertions, 43 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ae8494944c45..11c8c19f0fb7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -448,8 +448,10 @@ config PATA_MARVELL tristate "Marvell PATA support via legacy mode" depends on PCI help - This option enables limited support for the Marvell 88SE6145 ATA - controller. + This option enables limited support for the Marvell 88SE61xx ATA + controllers. If you wish to use only the SATA ports then select + the AHCI driver alone. If you wish to the use the PATA port or + both SATA and PATA include this driver. If unsure, say N. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c729e6988bbb..2e1a7cb2ed5f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_mv */ { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_MV_PATA), + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ @@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + static inline int ahci_nr_ports(u32 cap) { return (cap & 0x1f) + 1; @@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev, "MV_AHCI HACK: port_map %x -> %x\n", port_map, port_map & mv); + dev_printk(KERN_ERR, &pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); port_map &= mv; } @@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 304fdc6f1dc2..2a4c516894f0 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1315,11 +1315,6 @@ fsm_start: break; case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM))); - ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 24a011b25024..0d87eec84966 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -20,29 +20,30 @@ #include <linux/ata.h> #define DRV_NAME "pata_marvell" -#define DRV_VERSION "0.1.4" +#define DRV_VERSION "0.1.6" /** - * marvell_pre_reset - check for 40/80 pin - * @link: link - * @deadline: deadline jiffies for the operation + * marvell_pata_active - check if PATA is active + * @pdev: PCI device * - * Perform the PATA port setup we need. + * Returns 1 if the PATA port may be active. We know how to check this + * for the 6145 but not the other devices */ -static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) +static int marvell_pata_active(struct pci_dev *pdev) { - struct ata_port *ap = link->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int i; u32 devices; void __iomem *barp; - int i; - /* Check if our port is enabled */ + /* We don't yet know how to do this for other devices */ + if (pdev->device != 0x6145) + return 1; barp = pci_iomap(pdev, 5, 0x10); if (barp == NULL) return -ENOMEM; + printk("BAR5:"); for(i = 0; i <= 0x0F; i++) printk("%02X:%02X ", i, ioread8(barp + i)); @@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) devices = ioread32(barp + 0x0C); pci_iounmap(pdev, barp); - if ((pdev->device == 0x6145) && (ap->port_no == 0) && - (!(devices & 0x10))) /* PATA enable ? */ - return -ENOENT; + if (devices & 0x10) + return 1; + return 0; +} + +/** + * marvell_pre_reset - check for 40/80 pin + * @link: link + * @deadline: deadline jiffies for the operation + * + * Perform the PATA port setup we need. + */ + +static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (pdev->device == 0x6145 && ap->port_no == 0 && + !marvell_pata_active(pdev)) /* PATA enable ? */ + return -ENOENT; return ata_sff_prereset(link, deadline); } @@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i if (pdev->device == 0x6101) ppi[1] = &ata_dummy_port_info; +#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE) + if (!marvell_pata_active(pdev)) { + printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); + return -ENODEV; + } +#endif return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL); } diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 720b8645f58a..e970b227fbce 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, /* Try to acquire MMIO resources and fallback to PIO if * that fails */ - rc = pcim_enable_device(pdev); - if (rc) - return rc; rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME); if (rc) goto use_ioports; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 13c1d2af18ac..c815f8ecf6e6 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x5041), chip_504x }, { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 }, { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, - /* RocketRAID 1740/174x have different identifiers */ + /* RocketRAID 1720/174x have different identifiers */ + { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, { PCI_VDEVICE(TTI, 0x1740), chip_508x }, { PCI_VDEVICE(TTI, 0x1742), chip_508x }, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 858f70610eda..1e1f3f3757ae 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = { static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = nv_hardreset, + .hardreset = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; @@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int rc; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Request follow up SRST. For more info, - * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 - */ - rc = sata_sff_hardreset(link, class, deadline); - if (rc) - return rc; - return -EAGAIN; -} - static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; |