diff options
| -rw-r--r-- | arch/arm64/mm/init.c | 3 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/eboot.c | 18 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_32.S | 54 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_64.S | 56 | ||||
| -rw-r--r-- | arch/x86/include/asm/io_apic.h | 1 | ||||
| -rw-r--r-- | arch/x86/mm/dump_pagetables.c | 4 | ||||
| -rw-r--r-- | arch/x86/mm/mmap.c | 2 | ||||
| -rw-r--r-- | drivers/firmware/efi/libstub/fdt.c | 10 |
8 files changed, 108 insertions, 40 deletions
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 5472c2401876..a83061f37e43 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -149,8 +149,7 @@ void __init arm64_memblock_init(void) memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start); #endif - if (!efi_enabled(EFI_MEMMAP)) - early_init_fdt_scan_reserved_mem(); + early_init_fdt_scan_reserved_mem(); /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index f277184e2ac1..dca9842d8f91 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1032,7 +1032,6 @@ struct boot_params *make_boot_params(struct efi_config *c) int i; unsigned long ramdisk_addr; unsigned long ramdisk_size; - unsigned long initrd_addr_max; efi_early = c; sys_table = (efi_system_table_t *)(unsigned long)efi_early->table; @@ -1095,15 +1094,20 @@ struct boot_params *make_boot_params(struct efi_config *c) memset(sdt, 0, sizeof(*sdt)); - if (hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G) - initrd_addr_max = -1UL; - else - initrd_addr_max = hdr->initrd_addr_max; - status = handle_cmdline_files(sys_table, image, (char *)(unsigned long)hdr->cmd_line_ptr, - "initrd=", initrd_addr_max, + "initrd=", hdr->initrd_addr_max, &ramdisk_addr, &ramdisk_size); + + if (status != EFI_SUCCESS && + hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G) { + efi_printk(sys_table, "Trying to load files to higher address\n"); + status = handle_cmdline_files(sys_table, image, + (char *)(unsigned long)hdr->cmd_line_ptr, + "initrd=", -1UL, + &ramdisk_addr, &ramdisk_size); + } + if (status != EFI_SUCCESS) goto fail2; hdr->ramdisk_image = ramdisk_addr & 0xffffffff; diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index cbed1407a5cd..d6b8aa4c986c 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -30,6 +30,33 @@ #include <asm/boot.h> #include <asm/asm-offsets.h> +/* + * Adjust our own GOT + * + * The relocation base must be in %ebx + * + * It is safe to call this macro more than once, because in some of the + * code paths multiple invocations are inevitable, e.g. via the efi* + * entry points. + * + * Relocation is only performed the first time. + */ +.macro FIXUP_GOT + cmpb $1, got_fixed(%ebx) + je 2f + + leal _got(%ebx), %edx + leal _egot(%ebx), %ecx +1: + cmpl %ecx, %edx + jae 2f + addl %ebx, (%edx) + addl $4, %edx + jmp 1b +2: + movb $1, got_fixed(%ebx) +.endm + __HEAD ENTRY(startup_32) #ifdef CONFIG_EFI_STUB @@ -56,6 +83,9 @@ ENTRY(efi_pe_entry) add %esi, 88(%eax) pushl %eax + movl %esi, %ebx + FIXUP_GOT + call make_boot_params cmpl $0, %eax je fail @@ -81,6 +111,10 @@ ENTRY(efi32_stub_entry) leal efi32_config(%esi), %eax add %esi, 88(%eax) pushl %eax + + movl %esi, %ebx + FIXUP_GOT + 2: call efi_main cmpl $0, %eax @@ -190,19 +224,7 @@ relocated: shrl $2, %ecx rep stosl -/* - * Adjust our own GOT - */ - leal _got(%ebx), %edx - leal _egot(%ebx), %ecx -1: - cmpl %ecx, %edx - jae 2f - addl %ebx, (%edx) - addl $4, %edx - jmp 1b -2: - + FIXUP_GOT /* * Do the decompression, and jump to the new kernel.. */ @@ -225,8 +247,12 @@ relocated: xorl %ebx, %ebx jmp *%eax -#ifdef CONFIG_EFI_STUB .data +/* Have we relocated the GOT? */ +got_fixed: + .byte 0 + +#ifdef CONFIG_EFI_STUB efi32_config: .fill 11,8,0 .long efi_call_phys diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 2884e0c3e8a5..50f69c7eaaf4 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -32,6 +32,33 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> +/* + * Adjust our own GOT + * + * The relocation base must be in %rbx + * + * It is safe to call this macro more than once, because in some of the + * code paths multiple invocations are inevitable, e.g. via the efi* + * entry points. + * + * Relocation is only performed the first time. + */ +.macro FIXUP_GOT + cmpb $1, got_fixed(%rip) + je 2f + + leaq _got(%rip), %rdx + leaq _egot(%rip), %rcx +1: + cmpq %rcx, %rdx + jae 2f + addq %rbx, (%rdx) + addq $8, %rdx + jmp 1b +2: + movb $1, got_fixed(%rip) +.endm + __HEAD .code32 ENTRY(startup_32) @@ -252,10 +279,13 @@ ENTRY(efi_pe_entry) subq $1b, %rbp /* - * Relocate efi_config->call(). + * Relocate efi_config->call() and the GOT entries. */ addq %rbp, efi64_config+88(%rip) + movq %rbp, %rbx + FIXUP_GOT + movq %rax, %rdi call make_boot_params cmpq $0,%rax @@ -271,10 +301,13 @@ handover_entry: subq $1b, %rbp /* - * Relocate efi_config->call(). + * Relocate efi_config->call() and the GOT entries. */ movq efi_config(%rip), %rax addq %rbp, 88(%rax) + + movq %rbp, %rbx + FIXUP_GOT 2: movq efi_config(%rip), %rdi call efi_main @@ -385,19 +418,8 @@ relocated: shrq $3, %rcx rep stosq -/* - * Adjust our own GOT - */ - leaq _got(%rip), %rdx - leaq _egot(%rip), %rcx -1: - cmpq %rcx, %rdx - jae 2f - addq %rbx, (%rdx) - addq $8, %rdx - jmp 1b -2: - + FIXUP_GOT + /* * Do the decompression, and jump to the new kernel.. */ @@ -437,6 +459,10 @@ gdt: .quad 0x0000000000000000 /* TS continued */ gdt_end: +/* Have we relocated the GOT? */ +got_fixed: + .byte 0 + #ifdef CONFIG_EFI_STUB efi_config: .quad 0 diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 478c490f3654..1733ab49ac5e 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -239,6 +239,7 @@ static inline int mp_find_ioapic(u32 gsi) { return 0; } static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; } static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) { return gsi; } static inline void mp_unmap_irq(int irq) { } +static inline bool mp_should_keep_irq(struct device *dev) { return 1; } static inline int save_ioapic_entries(void) { diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 167ffcac16ed..95a427e57887 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -48,7 +48,9 @@ enum address_markers_idx { LOW_KERNEL_NR, VMALLOC_START_NR, VMEMMAP_START_NR, +# ifdef CONFIG_X86_ESPFIX64 ESPFIX_START_NR, +# endif HIGH_KERNEL_NR, MODULES_VADDR_NR, MODULES_END_NR, @@ -71,7 +73,9 @@ static struct addr_marker address_markers[] = { { PAGE_OFFSET, "Low Kernel Mapping" }, { VMALLOC_START, "vmalloc() Area" }, { VMEMMAP_START, "Vmemmap" }, +# ifdef CONFIG_X86_ESPFIX64 { ESPFIX_BASE_ADDR, "ESPfix Area", 16 }, +# endif { __START_KERNEL_map, "High Kernel Mapping" }, { MODULES_VADDR, "Modules" }, { MODULES_END, "End Modules" }, diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c index 25e7e1372bb2..919b91205cd4 100644 --- a/arch/x86/mm/mmap.c +++ b/arch/x86/mm/mmap.c @@ -31,7 +31,7 @@ #include <linux/sched.h> #include <asm/elf.h> -struct __read_mostly va_alignment va_align = { +struct va_alignment __read_mostly va_align = { .flags = -1, }; diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index a56bb3528755..c846a9608cbd 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -22,7 +22,7 @@ efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, unsigned long map_size, unsigned long desc_size, u32 desc_ver) { - int node, prev; + int node, prev, num_rsv; int status; u32 fdt_val32; u64 fdt_val64; @@ -73,6 +73,14 @@ efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, prev = node; } + /* + * Delete all memory reserve map entries. When booting via UEFI, + * kernel will use the UEFI memory map to find reserved regions. + */ + num_rsv = fdt_num_mem_rsv(fdt); + while (num_rsv-- > 0) + fdt_del_mem_rsv(fdt, num_rsv); + node = fdt_subnode_offset(fdt, 0, "chosen"); if (node < 0) { node = fdt_add_subnode(fdt, 0, "chosen"); |