diff options
83 files changed, 2015 insertions, 1041 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices index 35c457f8ce73..4404bd9b96c1 100644 --- a/Documentation/ABI/stable/sysfs-devices +++ b/Documentation/ABI/stable/sysfs-devices @@ -1,5 +1,5 @@ # Note: This documents additional properties of any device beyond what -# is documented in Documentation/sysfs-rules.txt +# is documented in Documentation/admin-guide/sysfs-rules.rst What: /sys/devices/*/of_node Date: February 2015 diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm index 8374d4557e5d..ca622c9aa24c 100644 --- a/Documentation/ABI/testing/evm +++ b/Documentation/ABI/testing/evm @@ -18,6 +18,6 @@ Description: in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to: - Documentation/keys-trusted-encrypted.txt. (A sample dracut - patch, which loads the trusted/encrypted key and enables + Documentation/security/keys/trusted-encrypted.rst. (A sample + dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM.) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index f3d5817c4ef0..d6d862db3b5d 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -187,7 +187,8 @@ Description: Processor frequency boosting control This switch controls the boost setting for the whole system. Boosting allows the CPU and the firmware to run at a frequency beyound it's nominal limit. - More details can be found in Documentation/cpu-freq/boost.txt + More details can be found in + Documentation/admin-guide/pm/cpufreq.rst What: /sys/devices/system/cpu/cpu#/crash_notes @@ -223,7 +224,8 @@ Description: Parameters for the Intel P-state driver no_turbo: limits the driver to selecting P states below the turbo frequency range. - More details can be found in Documentation/cpu-freq/intel-pstate.txt + More details can be found in + Documentation/admin-guide/pm/intel_pstate.rst What: /sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below> Date: July 2014(documented, existed before August 2008) diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index a1d1612f3651..1e0d1dac706b 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -18,7 +18,8 @@ Description: Writing one of the above strings to this file causes the system to transition into the corresponding state, if available. - See Documentation/power/states.txt for more information. + See Documentation/admin-guide/pm/sleep-states.rst for more + information. What: /sys/power/mem_sleep Date: November 2016 @@ -35,7 +36,8 @@ Description: represented by it to be used on subsequent attempts to suspend the system. - See Documentation/power/states.txt for more information. + See Documentation/admin-guide/pm/sleep-states.rst for more + information. What: /sys/power/disk Date: September 2006 diff --git a/Documentation/Makefile b/Documentation/Makefile index 85f7856f0092..2ca77ad0f238 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -97,6 +97,9 @@ endif # HAVE_SPHINX # The following targets are independent of HAVE_SPHINX, and the rules should # work or silently pass without Sphinx. +refcheckdocs: + $(Q)cd $(srctree);scripts/documentation-file-ref-check + cleandocs: $(Q)rm -rf $(BUILDDIR) $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean @@ -109,6 +112,7 @@ dochelp: @echo ' epubdocs - EPUB' @echo ' xmldocs - XML' @echo ' linkcheckdocs - check for broken external links (will connect to external hosts)' + @echo ' refcheckdocs - check for references to non-existing files under Documentation' @echo ' cleandocs - clean all generated files' @echo @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2' @@ -116,3 +120,5 @@ dochelp: @echo @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build' @echo ' configuration. This is e.g. useful to build with nit-picking config.' + @echo + @echo ' Default location for the generated documents is Documentation/output' diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html index e5d0bbd0230b..7394f034be65 100644 --- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html @@ -527,7 +527,7 @@ grace period also drove it to completion. This straightforward approach had the disadvantage of needing to account for POSIX signals sent to user tasks, so more recent implemementations use the Linux kernel's -<a href="https://www.kernel.org/doc/Documentation/workqueue.txt">workqueues</a>. +<a href="https://www.kernel.org/doc/Documentation/core-api/workqueue.rst">workqueues</a>. <p> The requesting task still does counter snapshotting and funnel-lock diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index b5343c5aa224..63066db39910 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -350,7 +350,7 @@ If something goes wrong help debugging the problem. The text above the dump is also important: it tells something about why the kernel dumped code (in the above example, it's due to a bad kernel pointer). More information - on making sense of the dump is in Documentation/admin-guide/oops-tracing.rst + on making sense of the dump is in Documentation/admin-guide/bug-hunting.rst - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump as is, otherwise you will have to use the ``ksymoops`` program to make diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst index 08c4b1308189..f278b289e260 100644 --- a/Documentation/admin-guide/bug-hunting.rst +++ b/Documentation/admin-guide/bug-hunting.rst @@ -240,7 +240,7 @@ In order to report it upstream, you should identify the mailing list used for the development of the affected code. This can be done by using the ``get_maintainer.pl`` script. -For example, if you find a bug at the gspca's conex.c file, you can get +For example, if you find a bug at the gspca's sonixj.c file, you can get their maintainers with:: $ ./scripts/get_maintainer.pl -f drivers/media/usb/gspca/sonixj.c @@ -257,7 +257,7 @@ Please notice that it will point to: Tejun and Bhaktipriya (in this specific case, none really envolved on the development of this file); - The driver maintainer (Hans Verkuil); -- The subsystem maintainer (Mauro Carvalho Chehab) +- The subsystem maintainer (Mauro Carvalho Chehab); - The driver and/or subsystem mailing list (linux-media@vger.kernel.org); - the Linux Kernel mailing list (linux-kernel@vger.kernel.org). @@ -274,14 +274,14 @@ Fixing the bug -------------- If you know programming, you could help us by not only reporting the bug, -but also providing us with a solution. After all open source is about +but also providing us with a solution. After all, open source is about sharing what you do and don't you want to be recognised for your genius? If you decide to take this way, once you have worked out a fix please submit it upstream. Please do read -ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though +:ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though to help your code get accepted. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 05496622b4ef..97a76eea7389 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -314,7 +314,7 @@ amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> - See also Documentation/input/joystick.txt + See also Documentation/input/joydev/joystick.rst analog.map= [HW,JOY] Analog joystick and gamepad support Specifies type or capabilities of an analog joystick @@ -439,7 +439,7 @@ bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too. - bttv.pll= See Documentation/video4linux/bttv/Insmod-options + bttv.pll= See Documentation/media/v4l-drivers/bttv.rst bttv.tuner= bulk_remove=off [PPC] This parameter disables the use of the pSeries @@ -641,8 +641,8 @@ For now, only VisioBraille is supported. consoleblank= [KNL] The console blank (screen saver) timeout in - seconds. Defaults to 10*60 = 10mins. A value of 0 - disables the blank timer. + seconds. A value of 0 disables the blank timer. + Defaults to 0. coredump_filter= [KNL] Change the default value for @@ -724,7 +724,7 @@ db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port (one device per port) Format: <port#>,<type> - See also Documentation/input/joystick-parport.txt + See also Documentation/input/devices/joystick-parport.rst ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot time. See @@ -1220,7 +1220,7 @@ [HW,JOY] Multisystem joystick and NES/SNES/PSX pad support via parallel port (up to 5 devices per port) Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5> - See also Documentation/input/joystick-parport.txt + See also Documentation/input/devices/joystick-parport.rst gamma= [HW,DRM] @@ -1766,7 +1766,7 @@ ivrs_acpihid[00:14.5]=AMD0020:0 js= [HW,JOY] Analog joystick - See Documentation/input/joystick.txt. + See Documentation/input/joydev/joystick.rst. nokaslr [KNL] When CONFIG_RANDOMIZE_BASE is set, this disables @@ -2248,10 +2248,10 @@ s2idle - Suspend-To-Idle shallow - Power-On Suspend or equivalent (if supported) deep - Suspend-To-RAM or equivalent (if supported) - See Documentation/power/states.txt. + See Documentation/admin-guide/pm/sleep-states.rst. meye.*= [HW] Set MotionEye Camera parameters - See Documentation/video4linux/meye.txt. + See Documentation/media/v4l-drivers/meye.rst. mfgpt_irq= [IA-32] Specify the IRQ to use for the Multi-Function General Purpose Timers on AMD Geode @@ -3134,7 +3134,7 @@ plip= [PPT,NET] Parallel port network link Format: { parport<nr> | timid | 0 } - See also Documentation/parport.txt. + See also Documentation/admin-guide/parport.rst. pmtmr= [X86] Manual setup of pmtmr I/O Port. Override pmtimer IOPort with a hex value. @@ -3885,6 +3885,12 @@ [KNL] Should the soft-lockup detector generate panics. Format: <integer> + A nonzero value instructs the soft-lockup detector + to panic the machine when a soft-lockup occurs. This + is also controlled by CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC + which is the respective build-time switch to that + functionality. + softlockup_all_cpu_backtrace= [KNL] Should the soft-lockup detector generate backtraces on all cpus. @@ -4199,7 +4205,7 @@ TurboGraFX parallel port interface Format: <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7> - See also Documentation/input/joystick-parport.txt + See also Documentation/input/devices/joystick-parport.rst udbg-immortal [PPC] When debugging early kernel crashes that happen after console_init() and before a proper diff --git a/Documentation/admin-guide/reporting-bugs.rst b/Documentation/admin-guide/reporting-bugs.rst index 26b60b419652..4650edb8840a 100644 --- a/Documentation/admin-guide/reporting-bugs.rst +++ b/Documentation/admin-guide/reporting-bugs.rst @@ -94,7 +94,7 @@ step-by-step instructions for how a user can trigger the bug. If the failure includes an "OOPS:", take a picture of the screen, capture a netconsole trace, or type the message from your screen into the bug -report. Please read "Documentation/admin-guide/oops-tracing.rst" before posting your +report. Please read "Documentation/admin-guide/bug-hunting.rst" before posting your bug report. This explains what you should do with the "Oops" information to make it useful to the recipient. @@ -120,7 +120,7 @@ summary from [1.]>" for easy identification by the developers:: [4.2.] Kernel .config file: [5.] Most recent kernel version which did not have the bug: [6.] Output of Oops.. message (if applicable) with symbolic information - resolved (see Documentation/admin-guide/oops-tracing.rst) + resolved (see Documentation/admin-guide/bug-hunting.rst) [7.] A small shell script or example program which triggers the problem (if possible) [8.] Environment diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd index f4dc9de2694e..a5f2a7f1ff46 100644 --- a/Documentation/cdrom/ide-cd +++ b/Documentation/cdrom/ide-cd @@ -55,13 +55,9 @@ This driver provides the following features: (to compile support as a module which can be loaded and unloaded) to the options: - Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support + ATA/ATAPI/MFM/RLL support Include IDE/ATAPI CDROM support - and `no' to - - Use old disk-only driver on primary interface - Depending on what type of IDE interface you have, you may need to specify additional configuration options. See Documentation/ide/ide.txt. diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 5da10184d908..2d9da6c40a4d 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -2,11 +2,9 @@ The Linux Kernel API ==================== -Data Types -========== -Doubly Linked Lists -------------------- +List Management Functions +========================= .. kernel-doc:: include/linux/list.h :internal: @@ -56,11 +54,26 @@ Bitmap Operations ----------------- .. kernel-doc:: lib/bitmap.c + :doc: bitmap introduction + +.. kernel-doc:: include/linux/bitmap.h + :doc: declare bitmap + +.. kernel-doc:: include/linux/bitmap.h + :doc: bitmap overview + +.. kernel-doc:: include/linux/bitmap.h + :doc: bitmap bitops + +.. kernel-doc:: lib/bitmap.c :export: .. kernel-doc:: lib/bitmap.c :internal: +.. kernel-doc:: include/linux/bitmap.h + :internal: + Command-line Parsing -------------------- @@ -70,13 +83,16 @@ Command-line Parsing CRC Functions ------------- +.. kernel-doc:: lib/crc4.c + :export: + .. kernel-doc:: lib/crc7.c :export: -.. kernel-doc:: lib/crc16.c +.. kernel-doc:: lib/crc8.c :export: -.. kernel-doc:: lib/crc-itu-t.c +.. kernel-doc:: lib/crc16.c :export: .. kernel-doc:: lib/crc32.c @@ -84,6 +100,9 @@ CRC Functions .. kernel-doc:: lib/crc-ccitt.c :export: +.. kernel-doc:: lib/crc-itu-t.c + :export: + idr/ida Functions ----------------- @@ -96,6 +115,30 @@ idr/ida Functions .. kernel-doc:: lib/idr.c :export: +Math Functions in Linux +======================= + +Base 2 log and power Functions +------------------------------ + +.. kernel-doc:: include/linux/log2.h + :internal: + +Division Functions +------------------ + +.. kernel-doc:: include/asm-generic/div64.h + :functions: do_div + +.. kernel-doc:: include/linux/math64.h + :internal: + +.. kernel-doc:: lib/div64.c + :functions: div_s64_rem div64_u64_rem div64_u64 div64_s64 + +.. kernel-doc:: lib/gcd.c + :export: + Memory Management in Linux ========================== diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst index 4a64b4c69d3f..37e474ff6911 100644 --- a/Documentation/dev-tools/coccinelle.rst +++ b/Documentation/dev-tools/coccinelle.rst @@ -209,7 +209,7 @@ err.log will now have the profiling information, while stdout will provide some progress information as Coccinelle moves forward with work. -DEBUG_FILE support is only supported when using coccinelle >= 1.2. +DEBUG_FILE support is only supported when using coccinelle >= 1.0.2. .cocciconfig support -------------------- diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index ebd03d11d2c2..e80850eefe13 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -31,6 +31,17 @@ To build and run the tests with a single command, use:: Note that some tests will require root privileges. +Build and run from user specific object directory (make O=dir):: + + $ make O=/tmp/kselftest kselftest + +Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: + + $ make KBUILD_OUTPUT=/tmp/kselftest kselftest + +The above commands run the tests and print pass/fail summary to make it +easier to understand the test results. Please find the detailed individual +test results for each test in /tmp/testname file(s). Running a subset of selftests ============================= @@ -46,10 +57,21 @@ You can specify multiple tests to build and run:: $ make TARGETS="size timers" kselftest +Build and run from user specific object directory (make O=dir):: + + $ make O=/tmp/kselftest TARGETS="size timers" kselftest + +Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: + + $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest + +The above commands run the tests and print pass/fail summary to make it +easier to understand the test results. Please find the detailed individual +test results for each test in /tmp/testname file(s). + See the top-level tools/testing/selftests/Makefile for the list of all possible targets. - Running the full range hotplug selftests ======================================== @@ -113,9 +135,17 @@ Contributing new tests (details) * Use TEST_GEN_XXX if such binaries or files are generated during compiling. - TEST_PROGS, TEST_GEN_PROGS mean it is the excutable tested by + TEST_PROGS, TEST_GEN_PROGS mean it is the executable tested by default. + TEST_CUSTOM_PROGS should be used by tests that require custom build + rule and prevent common build rule use. + + TEST_PROGS are for test shell scripts. Please ensure shell script has + its exec bit set. Otherwise, lib.mk run_tests will generate a warning. + + TEST_CUSTOM_PROGS and TEST_PROGS will be run by common run_tests. + TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the executable which is not tested by default. TEST_FILES, TEST_GEN_FILES mean it is the file which is used by diff --git a/Documentation/dmaengine/00-INDEX b/Documentation/dmaengine/00-INDEX deleted file mode 100644 index 07de6573d22b..000000000000 --- a/Documentation/dmaengine/00-INDEX +++ /dev/null @@ -1,8 +0,0 @@ -00-INDEX - - this file. -client.txt - -the DMA Engine API Guide. -dmatest.txt - - how to compile, configure and use the dmatest system. -provider.txt - - the DMA controller API.
\ No newline at end of file diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt deleted file mode 100644 index c72b4563de10..000000000000 --- a/Documentation/dmaengine/client.txt +++ /dev/null @@ -1,222 +0,0 @@ - DMA Engine API Guide - ==================== - - Vinod Koul <vinod dot koul at intel.com> - -NOTE: For DMA Engine usage in async_tx please see: - Documentation/crypto/async-tx-api.txt - - -Below is a guide to device driver writers on how to use the Slave-DMA API of the -DMA Engine. This is applicable only for slave DMA usage only. - -The slave DMA usage consists of following steps: -1. Allocate a DMA slave channel -2. Set slave and controller specific parameters -3. Get a descriptor for transaction -4. Submit the transaction -5. Issue pending requests and wait for callback notification - -1. Allocate a DMA slave channel - - Channel allocation is slightly different in the slave DMA context, - client drivers typically need a channel from a particular DMA - controller only and even in some cases a specific channel is desired. - To request a channel dma_request_chan() API is used. - - Interface: - struct dma_chan *dma_request_chan(struct device *dev, const char *name); - - Which will find and return the 'name' DMA channel associated with the 'dev' - device. The association is done via DT, ACPI or board file based - dma_slave_map matching table. - - A channel allocated via this interface is exclusive to the caller, - until dma_release_channel() is called. - -2. Set slave and controller specific parameters - - Next step is always to pass some specific information to the DMA - driver. Most of the generic information which a slave DMA can use - is in struct dma_slave_config. This allows the clients to specify - DMA direction, DMA addresses, bus widths, DMA burst lengths etc - for the peripheral. - - If some DMA controllers have more parameters to be sent then they - should try to embed struct dma_slave_config in their controller - specific structure. That gives flexibility to client to pass more - parameters, if required. - - Interface: - int dmaengine_slave_config(struct dma_chan *chan, - struct dma_slave_config *config) - - Please see the dma_slave_config structure definition in dmaengine.h - for a detailed explanation of the struct members. Please note - that the 'direction' member will be going away as it duplicates the - direction given in the prepare call. - -3. Get a descriptor for transaction - - For slave usage the various modes of slave transfers supported by the - DMA-engine are: - - slave_sg - DMA a list of scatter gather buffers from/to a peripheral - dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the - operation is explicitly stopped. - interleaved_dma - This is common to Slave as well as M2M clients. For slave - address of devices' fifo could be already known to the driver. - Various types of operations could be expressed by setting - appropriate values to the 'dma_interleaved_template' members. - - A non-NULL return of this transfer API represents a "descriptor" for - the given transaction. - - Interface: - struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( - struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_data_direction direction, - unsigned long flags); - - struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( - struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_data_direction direction); - - struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( - struct dma_chan *chan, struct dma_interleaved_template *xt, - unsigned long flags); - - The peripheral driver is expected to have mapped the scatterlist for - the DMA operation prior to calling dmaengine_prep_slave_sg(), and must - keep the scatterlist mapped until the DMA operation has completed. - The scatterlist must be mapped using the DMA struct device. - If a mapping needs to be synchronized later, dma_sync_*_for_*() must be - called using the DMA struct device, too. - So, normal setup should look like this: - - nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len); - if (nr_sg == 0) - /* error */ - - desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags); - - Once a descriptor has been obtained, the callback information can be - added and the descriptor must then be submitted. Some DMA engine - drivers may hold a spinlock between a successful preparation and - submission so it is important that these two operations are closely - paired. - - Note: - Although the async_tx API specifies that completion callback - routines cannot submit any new operations, this is not the - case for slave/cyclic DMA. - - For slave DMA, the subsequent transaction may not be available - for submission prior to callback function being invoked, so - slave DMA callbacks are permitted to prepare and submit a new - transaction. - - For cyclic DMA, a callback function may wish to terminate the - DMA via dmaengine_terminate_async(). - - Therefore, it is important that DMA engine drivers drop any - locks before calling the callback function which may cause a - deadlock. - - Note that callbacks will always be invoked from the DMA - engines tasklet, never from interrupt context. - -4. Submit the transaction - - Once the descriptor has been prepared and the callback information - added, it must be placed on the DMA engine drivers pending queue. - - Interface: - dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) - - This returns a cookie can be used to check the progress of DMA engine - activity via other DMA engine calls not covered in this document. - - dmaengine_submit() will not start the DMA operation, it merely adds - it to the pending queue. For this, see step 5, dma_async_issue_pending. - -5. Issue pending DMA requests and wait for callback notification - - The transactions in the pending queue can be activated by calling the - issue_pending API. If channel is idle then the first transaction in - queue is started and subsequent ones queued up. - - On completion of each DMA operation, the next in queue is started and - a tasklet triggered. The tasklet will then call the client driver - completion callback routine for notification, if set. - - Interface: - void dma_async_issue_pending(struct dma_chan *chan); - -Further APIs: - -1. int dmaengine_terminate_sync(struct dma_chan *chan) - int dmaengine_terminate_async(struct dma_chan *chan) - int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */ - - This causes all activity for the DMA channel to be stopped, and may - discard data in the DMA FIFO which hasn't been fully transferred. - No callback functions will be called for any incomplete transfers. - - Two variants of this function are available. - - dmaengine_terminate_async() might not wait until the DMA has been fully - stopped or until any running complete callbacks have finished. But it is - possible to call dmaengine_terminate_async() from atomic context or from - within a complete callback. dmaengine_synchronize() must be called before it - is safe to free the memory accessed by the DMA transfer or free resources - accessed from within the complete callback. - - dmaengine_terminate_sync() will wait for the transfer and any running - complete callbacks to finish before it returns. But the function must not be - called from atomic context or from within a complete callback. - - dmaengine_terminate_all() is deprecated and should not be used in new code. - -2. int dmaengine_pause(struct dma_chan *chan) - - This pauses activity on the DMA channel without data loss. - -3. int dmaengine_resume(struct dma_chan *chan) - - Resume a previously paused DMA channel. It is invalid to resume a - channel which is not currently paused. - -4. enum dma_status dma_async_is_tx_complete(struct dma_chan *chan, - dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used) - - This can be used to check the status of the channel. Please see - the documentation in include/linux/dmaengine.h for a more complete - description of this API. - - This can be used in conjunction with dma_async_is_complete() and - the cookie returned from dmaengine_submit() to check for - completion of a specific DMA transaction. - - Note: - Not all DMA engine drivers can return reliable information for - a running DMA channel. It is recommended that DMA engine users - pause or stop (via dmaengine_terminate_all()) the channel before - using this API. - -5. void dmaengine_synchronize(struct dma_chan *chan) - - Synchronize the termination of the DMA channel to the current context. - - This function should be used after dmaengine_terminate_async() to synchronize - the termination of the DMA channel to the current context. The function will - wait for the transfer and any running complete callbacks to finish before it - returns. - - If dmaengine_terminate_async() is used to stop the DMA channel this function - must be called before it is safe to free memory accessed by previously - submitted descriptors or to free any resources accessed within the complete - callback of previously submitted descriptors. - - The behavior of this function is undefined if dma_async_issue_pending() has - been called between dmaengine_terminate_async() and this function. diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt deleted file mode 100644 index 5dbe054a40ad..000000000000 --- a/Documentation/dmaengine/provider.txt +++ /dev/null @@ -1,424 +0,0 @@ -DMAengine controller documentation -================================== - -Hardware Introduction -+++++++++++++++++++++ - -Most of the Slave DMA controllers have the same general principles of -operations. - -They have a given number of channels to use for the DMA transfers, and -a given number of requests lines. - -Requests and channels are pretty much orthogonal. Channels can be used -to serve several to any requests. To simplify, channels are the -entities that will be doing the copy, and requests what endpoints are -involved. - -The request lines actually correspond to physical lines going from the -DMA-eligible devices to the controller itself. Whenever the device -will want to start a transfer, it will assert a DMA request (DRQ) by -asserting that request line. - -A very simple DMA controller would only take into account a single -parameter: the transfer size. At each clock cycle, it would transfer a -byte of data from one buffer to another, until the transfer size has -been reached. - -That wouldn't work well in the real world, since slave devices might -require a specific number of bits to be transferred in a single -cycle. For example, we may want to transfer as much data as the -physical bus allows to maximize performances when doing a simple -memory copy operation, but our audio device could have a narrower FIFO -that requires data to be written exactly 16 or 24 bits at a time. This -is why most if not all of the DMA controllers can adjust this, using a -parameter called the transfer width. - -Moreover, some DMA controllers, whenever the RAM is used as a source -or destination, can group the reads or writes in memory into a buffer, -so instead of having a lot of small memory accesses, which is not -really efficient, you'll get several bigger transfers. This is done -using a parameter called the burst size, that defines how many single -reads/writes it's allowed to do without the controller splitting the -transfer into smaller sub-transfers. - -Our theoretical DMA controller would then only be able to do transfers -that involve a single contiguous block of data. However, some of the -transfers we usually have are not, and want to copy data from -non-contiguous buffers to a contiguous buffer, which is called -scatter-gather. - -DMAEngine, at least for mem2dev transfers, require support for -scatter-gather. So we're left with two cases here: either we have a -quite simple DMA controller that doesn't support it, and we'll have to -implement it in software, or we have a more advanced DMA controller, -that implements in hardware scatter-gather. - -The latter are usually programmed using a collection of chunks to -transfer, and whenever the transfer is started, the controller will go -over that collection, doing whatever we programmed there. - -This collection is usually either a table or a linked list. You will -then push either the address of the table and its number of elements, -or the first item of the list to one channel of the DMA controller, -and whenever a DRQ will be asserted, it will go through the collection -to know where to fetch the data from. - -Either way, the format of this collection is completely dependent on -your hardware. Each DMA controller will require a different structure, -but all of them will require, for every chunk, at least the source and -destination addresses, whether it should increment these addresses or -not and the three parameters we saw earlier: the burst size, the -transfer width and the transfer size. - -The one last thing is that usually, slave devices won't issue DRQ by -default, and you have to enable this in your slave device driver first -whenever you're willing to use DMA. - -These were just the general memory-to-memory (also called mem2mem) or -memory-to-device (mem2dev) kind of transfers. Most devices often -support other kind of transfers or memory operations that dmaengine -support and will be detailed later in this document. - -DMA Support in Linux -++++++++++++++++++++ - -Historically, DMA controller drivers have been implemented using the -async TX API, to offload operations such as memory copy, XOR, -cryptography, etc., basically any memory to memory operation. - -Over time, the need for memory to device transfers arose, and -dmaengine was extended. Nowadays, the async TX API is written as a -layer on top of dmaengine, and acts as a client. Still, dmaengine -accommodates that API in some cases, and made some design choices to -ensure that it stayed compatible. - -For more information on the Async TX API, please look the relevant -documentation file in Documentation/crypto/async-tx-api.txt. - -DMAEngine Registration -++++++++++++++++++++++ - -struct dma_device Initialization --------------------------------- - -Just like any other kernel framework, the whole DMAEngine registration -relies on the driver filling a structure and registering against the -framework. In our case, that structure is dma_device. - -The first thing you need to do in your driver is to allocate this -structure. Any of the usual memory allocators will do, but you'll also -need to initialize a few fields in there: - - * channels: should be initialized as a list using the - INIT_LIST_HEAD macro for example - - * src_addr_widths: - - should contain a bitmask of the supported source transfer width - - * dst_addr_widths: - - should contain a bitmask of the supported destination transfer - width - - * directions: - - should contain a bitmask of the supported slave directions - (i.e. excluding mem2mem transfers) - - * residue_granularity: - - Granularity of the transfer residue reported to dma_set_residue. - - This can be either: - + Descriptor - -> Your device doesn't support any kind of residue - reporting. The framework will only know that a particular - transaction descriptor is done. - + Segment - -> Your device is able to report which chunks have been - transferred - + Burst - -> Your device is able to report which burst have been - transferred - - * dev: should hold the pointer to the struct device associated - to your current driver instance. - -Supported transaction types ---------------------------- - -The next thing you need is to set which transaction types your device -(and driver) supports. - -Our dma_device structure has a field called cap_mask that holds the -various types of transaction supported, and you need to modify this -mask using the dma_cap_set function, with various flags depending on -transaction types you support as an argument. - -All those capabilities are defined in the dma_transaction_type enum, -in include/linux/dmaengine.h - -Currently, the types available are: - * DMA_MEMCPY - - The device is able to do memory to memory copies - - * DMA_XOR - - The device is able to perform XOR operations on memory areas - - Used to accelerate XOR intensive tasks, such as RAID5 - - * DMA_XOR_VAL - - The device is able to perform parity check using the XOR - algorithm against a memory buffer. - - * DMA_PQ - - The device is able to perform RAID6 P+Q computations, P being a - simple XOR, and Q being a Reed-Solomon algorithm. - - * DMA_PQ_VAL - - The device is able to perform parity check using RAID6 P+Q - algorithm against a memory buffer. - - * DMA_INTERRUPT - - The device is able to trigger a dummy transfer that will - generate periodic interrupts - - Used by the client drivers to register a callback that will be - called on a regular basis through the DMA controller interrupt - - * DMA_PRIVATE - - The devices only supports slave transfers, and as such isn't - available for async transfers. - - * DMA_ASYNC_TX - - Must not be set by the device, and will be set by the framework - if needed - - /* TODO: What is it about? */ - - * DMA_SLAVE - - The device can handle device to memory transfers, including - scatter-gather transfers. - - While in the mem2mem case we were having two distinct types to - deal with a single chunk to copy or a collection of them, here, - we just have a single transaction type that is supposed to - handle both. - - If you want to transfer a single contiguous memory buffer, - simply build a scatter list with only one item. - - * DMA_CYCLIC - - The device can handle cyclic transfers. - - A cyclic transfer is a transfer where the chunk collection will - loop over itself, with the last item pointing to the first. - - It's usually used for audio transfers, where you want to operate - on a single ring buffer that you will fill with your audio data. - - * DMA_INTERLEAVE - - The device supports interleaved transfer. - - These transfers can transfer data from a non-contiguous buffer - to a non-contiguous buffer, opposed to DMA_SLAVE that can - transfer data from a non-contiguous data set to a continuous - destination buffer. - - It's usually used for 2d content transfers, in which case you - want to transfer a portion of uncompressed data directly to the - display to print it - -These various types will also affect how the source and destination -addresses change over time. - -Addresses pointing to RAM are typically incremented (or decremented) -after each transfer. In case of a ring buffer, they may loop -(DMA_CYCLIC). Addresses pointing to a device's register (e.g. a FIFO) -are typically fixed. - -Device operations ------------------ - -Our dma_device structure also requires a few function pointers in -order to implement the actual logic, now that we described what -operations we were able to perform. - -The functions that we have to fill in there, and hence have to -implement, obviously depend on the transaction types you reported as -supported. - - * device_alloc_chan_resources - * device_free_chan_resources - - These functions will be called whenever a driver will call - dma_request_channel or dma_release_channel for the first/last - time on the channel associated to that driver. - - They are in charge of allocating/freeing all the needed - resources in order for that channel to be useful for your - driver. - - These functions can sleep. - - * device_prep_dma_* - - These functions are matching the capabilities you registered - previously. - - These functions all take the buffer or the scatterlist relevant - for the transfer being prepared, and should create a hardware - descriptor or a list of hardware descriptors from it - - These functions can be called from an interrupt context - - Any allocation you might do should be using the GFP_NOWAIT - flag, in order not to potentially sleep, but without depleting - the emergency pool either. - - Drivers should try to pre-allocate any memory they might need - during the transfer setup at probe time to avoid putting to - much pressure on the nowait allocator. - - - It should return a unique instance of the - dma_async_tx_descriptor structure, that further represents this - particular transfer. - - - This structure can be initialized using the function - dma_async_tx_descriptor_init. - - You'll also need to set two fields in this structure: - + flags: - TODO: Can it be modified by the driver itself, or - should it be always the flags passed in the arguments - - + tx_submit: A pointer to a function you have to implement, - that is supposed to push the current - transaction descriptor to a pending queue, waiting - for issue_pending to be called. - - In this structure the function pointer callback_result can be - initialized in order for the submitter to be notified that a - transaction has completed. In the earlier code the function pointer - callback has been used. However it does not provide any status to the - transaction and will be deprecated. The result structure defined as - dmaengine_result that is passed in to callback_result has two fields: - + result: This provides the transfer result defined by - dmaengine_tx_result. Either success or some error - condition. - + residue: Provides the residue bytes of the transfer for those that - support residue. - - * device_issue_pending - - Takes the first transaction descriptor in the pending queue, - and starts the transfer. Whenever that transfer is done, it - should move to the next transaction in the list. - - This function can be called in an interrupt context - - * device_tx_status - - Should report the bytes left to go over on the given channel - - Should only care about the transaction descriptor passed as - argument, not the currently active one on a given channel - - The tx_state argument might be NULL - - Should use dma_set_residue to report it - - In the case of a cyclic transfer, it should only take into - account the current period. - - This function can be called in an interrupt context. - - * device_config - - Reconfigures the channel with the configuration given as - argument - - This command should NOT perform synchronously, or on any - currently queued transfers, but only on subsequent ones - - In this case, the function will receive a dma_slave_config - structure pointer as an argument, that will detail which - configuration to use. - - Even though that structure contains a direction field, this - field is deprecated in favor of the direction argument given to - the prep_* functions - - This call is mandatory for slave operations only. This should NOT be - set or expected to be set for memcpy operations. - If a driver support both, it should use this call for slave - operations only and not for memcpy ones. - - * device_pause - - Pauses a transfer on the channel - - This command should operate synchronously on the channel, - pausing right away the work of the given channel - - * device_resume - - Resumes a transfer on the channel - - This command should operate synchronously on the channel, - resuming right away the work of the given channel - - * device_terminate_all - - Aborts all the pending and ongoing transfers on the channel - - For aborted transfers the complete callback should not be called - - Can be called from atomic context or from within a complete - callback of a descriptor. Must not sleep. Drivers must be able - to handle this correctly. - - Termination may be asynchronous. The driver does not have to - wait until the currently active transfer has completely stopped. - See device_synchronize. - - * device_synchronize - - Must synchronize the termination of a channel to the current - context. - - Must make sure that memory for previously submitted - descriptors is no longer accessed by the DMA controller. - - Must make sure that all complete callbacks for previously - submitted descriptors have finished running and none are - scheduled to run. - - May sleep. - - -Misc notes (stuff that should be documented, but don't really know -where to put them) ------------------------------------------------------------------- - * dma_run_dependencies - - Should be called at the end of an async TX transfer, and can be - ignored in the slave transfers case. - - Makes sure that dependent operations are run before marking it - as complete. - - * dma_cookie_t - - it's a DMA transaction ID that will increment over time. - - Not really relevant any more since the introduction of virt-dma - that abstracts it away. - - * DMA_CTRL_ACK - - If clear, the descriptor cannot be reused by provider until the - client acknowledges receipt, i.e. has has a chance to establish any - dependency chains - - This can be acked by invoking async_tx_ack() - - If set, does not mean descriptor can be reused - - * DMA_CTRL_REUSE - - If set, the descriptor can be reused after being completed. It should - not be freed by provider if this flag is set. - - The descriptor should be prepared for reuse by invoking - dmaengine_desc_set_reuse() which will set DMA_CTRL_REUSE. - - dmaengine_desc_set_reuse() will succeed only when channel support - reusable descriptor as exhibited by capabilities - - As a consequence, if a device driver wants to skip the dma_map_sg() and - dma_unmap_sg() in between 2 transfers, because the DMA'd data wasn't used, - it can resubmit the transfer right after its completion. - - Descriptor can be freed in few ways - - Clearing DMA_CTRL_REUSE by invoking dmaengine_desc_clear_reuse() - and submitting for last txn - - Explicitly invoking dmaengine_desc_free(), this can succeed only - when DMA_CTRL_REUSE is already set - - Terminating the channel - - * DMA_PREP_CMD - - If set, the client driver tells DMA controller that passed data in DMA - API is command data. - - Interpretation of command data is DMA controller specific. It can be - used for issuing commands to other peripherals/register reads/register - writes for which the descriptor should be in different format from - normal data descriptors. - -General Design Notes --------------------- - -Most of the DMAEngine drivers you'll see are based on a similar design -that handles the end of transfer interrupts in the handler, but defer -most work to a tasklet, including the start of a new transfer whenever -the previous transfer ended. - -This is a rather inefficient design though, because the inter-transfer -latency will be not only the interrupt latency, but also the -scheduling latency of the tasklet, which will leave the channel idle -in between, which will slow down the global transfer rate. - -You should avoid this kind of practice, and instead of electing a new -transfer in your tasklet, move that part to the interrupt handler in -order to have a shorter idle window (that we can't really avoid -anyway). - -Glossary --------- - -Burst: A number of consecutive read or write operations - that can be queued to buffers before being flushed to - memory. -Chunk: A contiguous collection of bursts -Transfer: A collection of chunks (be it contiguous or not) diff --git a/Documentation/dmaengine/pxa_dma.txt b/Documentation/dmaengine/pxa_dma.txt deleted file mode 100644 index 0736d44b5438..000000000000 --- a/Documentation/dmaengine/pxa_dma.txt +++ /dev/null @@ -1,153 +0,0 @@ -PXA/MMP - DMA Slave controller -============================== - -Constraints ------------ - a) Transfers hot queuing - A driver submitting a transfer and issuing it should be granted the transfer - is queued even on a running DMA channel. - This implies that the queuing doesn't wait for the previous transfer end, - and that the descriptor chaining is not only done in the irq/tasklet code - triggered by the end of the transfer. - A transfer which is submitted and issued on a phy doesn't wait for a phy to - stop and restart, but is submitted on a "running channel". The other - drivers, especially mmp_pdma waited for the phy to stop before relaunching - a new transfer. - - b) All transfers having asked for confirmation should be signaled - Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call. - This implies that even if an irq/tasklet is triggered by end of tx1, but - at the time of irq/dma tx2 is already finished, tx1->complete() and - tx2->complete() should be called. - - c) Channel running state - A driver should be able to query if a channel is running or not. For the - multimedia case, such as video capture, if a transfer is submitted and then - a check of the DMA channel reports a "stopped channel", the transfer should - not be issued until the next "start of frame interrupt", hence the need to - know if a channel is in running or stopped state. - - d) Bandwidth guarantee - The PXA architecture has 4 levels of DMAs priorities : high, normal, low. - The high priorities get twice as much bandwidth as the normal, which get twice - as much as the low priorities. - A driver should be able to request a priority, especially the real-time - ones such as pxa_camera with (big) throughputs. - -Design ------- - a) Virtual channels - Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual - channel" linked to the requestor line, and the physical DMA channel is - assigned on the fly when the transfer is issued. - - b) Transfer anatomy for a scatter-gather transfer - +------------+-----+---------------+----------------+-----------------+ - | desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker | - +------------+-----+---------------+----------------+-----------------+ - - This structure is pointed by dma->sg_cpu. - The descriptors are used as follows : - - desc-sg[i]: i-th descriptor, transferring the i-th sg - element to the video buffer scatter gather - - status updater - Transfers a single u32 to a well known dma coherent memory to leave - a trace that this transfer is done. The "well known" is unique per - physical channel, meaning that a read of this value will tell which - is the last finished transfer at that point in time. - - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN - - linker: has ddadr= desc-sg[0] of next transfer, dcmd=0 - - c) Transfers hot-chaining - Suppose the running chain is : - Buffer 1 Buffer 2 - +---------+----+---+ +----+----+----+---+ - | d0 | .. | dN | l | | d0 | .. | dN | f | - +---------+----+-|-+ ^----+----+----+---+ - | | - +----+ - - After a call to dmaengine_submit(b3), the chain will look like : - Buffer 1 Buffer 2 Buffer 3 - +---------+----+---+ +----+----+----+---+ +----+----+----+---+ - | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | - +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ - | | | | - +----+ +----+ - new_link - - If while new_link was created the DMA channel stopped, it is _not_ - restarted. Hot-chaining doesn't break the assumption that - dma_async_issue_pending() is to be used to ensure the transfer is actually started. - - One exception to this rule : - - if Buffer1 and Buffer2 had all their addresses 8 bytes aligned - - and if Buffer3 has at least one address not 4 bytes aligned - - then hot-chaining cannot happen, as the channel must be stopped, the - "align bit" must be set, and the channel restarted As a consequence, - such a transfer tx_submit() will be queued on the submitted queue, and - this specific case if the DMA is already running in aligned mode. - - d) Transfers completion updater - Each time a transfer is completed on a channel, an interrupt might be - generated or not, up to the client's request. But in each case, the last - descriptor of a transfer, the "status updater", will write the latest - transfer being completed into the physical channel's completion mark. - - This will speed up residue calculation, for large transfers such as video - buffers which hold around 6k descriptors or more. This also allows without - any lock to find out what is the latest completed transfer in a running - DMA chain. - - e) Transfers completion, irq and tasklet - When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq - is raised. Upon this interrupt, a tasklet is scheduled for the physical - channel. - The tasklet is responsible for : - - reading the physical channel last updater mark - - calling all the transfer callbacks of finished transfers, based on - that mark, and each transfer flags. - If a transfer is completed while this handling is done, a dma irq will - be raised, and the tasklet will be scheduled once again, having a new - updater mark. - - f) Residue - Residue granularity will be descriptor based. The issued but not completed - transfers will be scanned for all of their descriptors against the - currently running descriptor. - - g) Most complicated case of driver's tx queues - The most tricky situation is when : - - there are not "acked" transfers (tx0) - - a driver submitted an aligned tx1, not chained - - a driver submitted an aligned tx2 => tx2 is cold chained to tx1 - - a driver issued tx1+tx2 => channel is running in aligned mode - - a driver submitted an aligned tx3 => tx3 is hot-chained - - a driver submitted an unaligned tx4 => tx4 is put in submitted queue, - not chained - - a driver issued tx4 => tx4 is put in issued queue, not chained - - a driver submitted an aligned tx5 => tx5 is put in submitted queue, not - chained - - a driver submitted an aligned tx6 => tx6 is put in submitted queue, - cold chained to tx5 - - This translates into (after tx4 is issued) : - - issued queue - +-----+ +-----+ +-----+ +-----+ - | tx1 | | tx2 | | tx3 | | tx4 | - +---|-+ ^---|-+ ^-----+ +-----+ - | | | | - +---+ +---+ - - submitted queue - +-----+ +-----+ - | tx5 | | tx6 | - +---|-+ ^-----+ - | | - +---+ - - completed queue : empty - - allocated queue : tx0 - - It should be noted that after tx3 is completed, the channel is stopped, and - restarted in "unaligned mode" to handle tx4. - -Author: Robert Jarzmik <robert.jarzmik@free.fr> diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index b24854b5d6be..0268335414ce 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -65,7 +65,7 @@ Without options, the kernel-doc directive includes all documentation comments from the source file. The kernel-doc extension is included in the kernel source tree, at -``Documentation/sphinx/kernel-doc.py``. Internally, it uses the +``Documentation/sphinx/kerneldoc.py``. Internally, it uses the ``scripts/kernel-doc`` script to extract the documentation comments from the source. diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst new file mode 100644 index 000000000000..6245c99af8c1 --- /dev/null +++ b/Documentation/driver-api/dmaengine/client.rst @@ -0,0 +1,275 @@ +==================== +DMA Engine API Guide +==================== + +Vinod Koul <vinod dot koul at intel.com> + +.. note:: For DMA Engine usage in async_tx please see: + ``Documentation/crypto/async-tx-api.txt`` + + +Below is a guide to device driver writers on how to use the Slave-DMA API of the +DMA Engine. This is applicable only for slave DMA usage only. + +DMA usage +========= + +The slave DMA usage consists of following steps: + +- Allocate a DMA slave channel + +- Set slave and controller specific parameters + +- Get a descriptor for transaction + +- Submit the transaction + +- Issue pending requests and wait for callback notification + +The details of these operations are: + +1. Allocate a DMA slave channel + + Channel allocation is slightly different in the slave DMA context, + client drivers typically need a channel from a particular DMA + controller only and even in some cases a specific channel is desired. + To request a channel dma_request_chan() API is used. + + Interface: + + .. code-block:: c + + struct dma_chan *dma_request_chan(struct device *dev, const char *name); + + Which will find and return the ``name`` DMA channel associated with the 'dev' + device. The association is done via DT, ACPI or board file based + dma_slave_map matching table. + + A channel allocated via this interface is exclusive to the caller, + until dma_release_channel() is called. + +2. Set slave and controller specific parameters + + Next step is always to pass some specific information to the DMA + driver. Most of the generic information which a slave DMA can use + is in struct dma_slave_config. This allows the clients to specify + DMA direction, DMA addresses, bus widths, DMA burst lengths etc + for the peripheral. + + If some DMA controllers have more parameters to be sent then they + should try to embed struct dma_slave_config in their controller + specific structure. That gives flexibility to client to pass more + parameters, if required. + + Interface: + + .. code-block:: c + + int dmaengine_slave_config(struct dma_chan *chan, + struct dma_slave_config *config) + + Please see the dma_slave_config structure definition in dmaengine.h + for a detailed explanation of the struct members. Please note + that the 'direction' member will be going away as it duplicates the + direction given in the prepare call. + +3. Get a descriptor for transaction + + For slave usage the various modes of slave transfers supported by the + DMA-engine are: + + - slave_sg: DMA a list of scatter gather buffers from/to a peripheral + + - dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the + operation is explicitly stopped. + + - interleaved_dma: This is common to Slave as well as M2M clients. For slave + address of devices' fifo could be already known to the driver. + Various types of operations could be expressed by setting + appropriate values to the 'dma_interleaved_template' members. + + A non-NULL return of this transfer API represents a "descriptor" for + the given transaction. + + Interface: + + .. code-block:: c + + struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction direction, + unsigned long flags); + + struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_data_direction direction); + + struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags); + + The peripheral driver is expected to have mapped the scatterlist for + the DMA operation prior to calling dmaengine_prep_slave_sg(), and must + keep the scatterlist mapped until the DMA operation has completed. + The scatterlist must be mapped using the DMA struct device. + If a mapping needs to be synchronized later, dma_sync_*_for_*() must be + called using the DMA struct device, too. + So, normal setup should look like this: + + .. code-block:: c + + nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len); + if (nr_sg == 0) + /* error */ + + desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags); + + Once a descriptor has been obtained, the callback information can be + added and the descriptor must then be submitted. Some DMA engine + drivers may hold a spinlock between a successful preparation and + submission so it is important that these two operations are closely + paired. + + .. note:: + + Although the async_tx API specifies that completion callback + routines cannot submit any new operations, this is not the + case for slave/cyclic DMA. + + For slave DMA, the subsequent transaction may not be available + for submission prior to callback function being invoked, so + slave DMA callbacks are permitted to prepare and submit a new + transaction. + + For cyclic DMA, a callback function may wish to terminate the + DMA via dmaengine_terminate_async(). + + Therefore, it is important that DMA engine drivers drop any + locks before calling the callback function which may cause a + deadlock. + + Note that callbacks will always be invoked from the DMA + engines tasklet, never from interrupt context. + +4. Submit the transaction + + Once the descriptor has been prepared and the callback information + added, it must be placed on the DMA engine drivers pending queue. + + Interface: + + .. code-block:: c + + dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) + + This returns a cookie can be used to check the progress of DMA engine + activity via other DMA engine calls not covered in this document. + + dmaengine_submit() will not start the DMA operation, it merely adds + it to the pending queue. For this, see step 5, dma_async_issue_pending. + +5. Issue pending DMA requests and wait for callback notification + + The transactions in the pending queue can be activated by calling the + issue_pending API. If channel is idle then the first transaction in + queue is started and subsequent ones queued up. + + On completion of each DMA operation, the next in queue is started and + a tasklet triggered. The tasklet will then call the client driver + completion callback routine for notification, if set. + + Interface: + + .. code-block:: c + + void dma_async_issue_pending(struct dma_chan *chan); + +Further APIs: +------------ + +1. Terminate APIs + + .. code-block:: c + + int dmaengine_terminate_sync(struct dma_chan *chan) + int dmaengine_terminate_async(struct dma_chan *chan) + int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */ + + This causes all activity for the DMA channel to be stopped, and may + discard data in the DMA FIFO which hasn't been fully transferred. + No callback functions will be called for any incomplete transfers. + + Two variants of this function are available. + + dmaengine_terminate_async() might not wait until the DMA has been fully + stopped or until any running complete callbacks have finished. But it is + possible to call dmaengine_terminate_async() from atomic context or from + within a complete callback. dmaengine_synchronize() must be called before it + is safe to free the memory accessed by the DMA transfer or free resources + accessed from within the complete callback. + + dmaengine_terminate_sync() will wait for the transfer and any running + complete callbacks to finish before it returns. But the function must not be + called from atomic context or from within a complete callback. + + dmaengine_terminate_all() is deprecated and should not be used in new code. + +2. Pause API + + .. code-block:: c + + int dmaengine_pause(struct dma_chan *chan) + + This pauses activity on the DMA channel without data loss. + +3. Resume API + + .. code-block:: c + + int dmaengine_resume(struct dma_chan *chan) + + Resume a previously paused DMA channel. It is invalid to resume a + channel which is not currently paused. + +4. Check Txn complete + + .. code-block:: c + + enum dma_status dma_async_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used) + + This can be used to check the status of the channel. Please see + the documentation in include/linux/dmaengine.h for a more complete + description of this API. + + This can be used in conjunction with dma_async_is_complete() and + the cookie returned from dmaengine_submit() to check for + completion of a specific DMA transaction. + + .. note:: + + Not all DMA engine drivers can return reliable information for + a running DMA channel. It is recommended that DMA engine users + pause or stop (via dmaengine_terminate_all()) the channel before + using this API. + +5. Synchronize termination API + + .. code-block:: c + + void dmaengine_synchronize(struct dma_chan *chan) + + Synchronize the termination of the DMA channel to the current context. + + This function should be used after dmaengine_terminate_async() to synchronize + the termination of the DMA channel to the current context. The function will + wait for the transfer and any running complete callbacks to finish before it + returns. + + If dmaengine_terminate_async() is used to stop the DMA channel this function + must be called before it is safe to free memory accessed by previously + submitted descriptors or to free any resources accessed within the complete + callback of previously submitted descriptors. + + The behavior of this function is undefined if dma_async_issue_pending() has + been called between dmaengine_terminate_async() and this function. diff --git a/Documentation/dmaengine/dmatest.txt b/Documentation/driver-api/dmaengine/dmatest.rst index fb683c72dea8..3922c0a3f0c0 100644 --- a/Documentation/dmaengine/dmatest.txt +++ b/Documentation/driver-api/dmaengine/dmatest.rst @@ -1,11 +1,13 @@ - DMA Test Guide - ============== +============== +DMA Test Guide +============== - Andy Shevchenko <andriy.shevchenko@linux.intel.com> +Andy Shevchenko <andriy.shevchenko@linux.intel.com> This small document introduces how to test DMA drivers using dmatest module. - Part 1 - How to build the test module +Part 1 - How to build the test module +===================================== The menuconfig contains an option that could be found by following path: Device Drivers -> DMA Engine support -> DMA Test client @@ -13,25 +15,31 @@ The menuconfig contains an option that could be found by following path: In the configuration file the option called CONFIG_DMATEST. The dmatest could be built as module or inside kernel. Let's consider those cases. - Part 2 - When dmatest is built as a module... +Part 2 - When dmatest is built as a module +========================================== -Example of usage: - % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1 +Example of usage: :: -...or: - % modprobe dmatest - % echo dma0chan0 > /sys/module/dmatest/parameters/channel - % echo 2000 > /sys/module/dmatest/parameters/timeout - % echo 1 > /sys/module/dmatest/parameters/iterations - % echo 1 > /sys/module/dmatest/parameters/run + % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1 -...or on the kernel command line: +...or: :: - dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1 + % modprobe dmatest + % echo dma0chan0 > /sys/module/dmatest/parameters/channel + % echo 2000 > /sys/module/dmatest/parameters/timeout + % echo 1 > /sys/module/dmatest/parameters/iterations + % echo 1 > /sys/module/dmatest/parameters/run -Hint: available channel list could be extracted by running the following -command: - % ls -1 /sys/class/dma/ +...or on the kernel command line: :: + + dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1 + +..hint:: available channel list could be extracted by running the following + command: + +:: + + % ls -1 /sys/class/dma/ Once started a message like "dmatest: Started 1 threads using dma0chan0" is emitted. After that only test failure messages are reported until the test @@ -39,8 +47,9 @@ stops. Note that running a new test will not stop any in progress test. -The following command returns the state of the test. - % cat /sys/module/dmatest/parameters/run +The following command returns the state of the test. :: + + % cat /sys/module/dmatest/parameters/run To wait for test completion userpace can poll 'run' until it is false, or use the wait parameter. Specifying 'wait=1' when loading the module causes module @@ -50,15 +59,19 @@ before returning. For example, the following scripts wait for 42 tests to complete before exiting. Note that if 'iterations' is set to 'infinite' then waiting is disabled. -Example: - % modprobe dmatest run=1 iterations=42 wait=1 - % modprobe -r dmatest -...or: - % modprobe dmatest run=1 iterations=42 - % cat /sys/module/dmatest/parameters/wait - % modprobe -r dmatest +Example: :: + + % modprobe dmatest run=1 iterations=42 wait=1 + % modprobe -r dmatest - Part 3 - When built-in in the kernel... +...or: :: + + % modprobe dmatest run=1 iterations=42 + % cat /sys/module/dmatest/parameters/wait + % modprobe -r dmatest + +Part 3 - When built-in in the kernel +==================================== The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be @@ -66,27 +79,32 @@ re-run with the same or different parameters. For the details see the above section "Part 2 - When dmatest is built as a module..." In both cases the module parameters are used as the actual values for the test -case. You always could check them at run-time by running - % grep -H . /sys/module/dmatest/parameters/* +case. You always could check them at run-time by running :: + + % grep -H . /sys/module/dmatest/parameters/* - Part 4 - Gathering the test results +Part 4 - Gathering the test results +=================================== -Test results are printed to the kernel log buffer with the format: +Test results are printed to the kernel log buffer with the format: :: -"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)" + "dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)" -Example of output: - % dmesg | tail -n 1 - dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) +Example of output: :: + + + % dmesg | tail -n 1 + dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. A test thread also emits a summary line at completion listing the number of tests executed, number that failed, and a result code. -Example: - % dmesg | tail -n 1 - dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0) +Example: :: + + % dmesg | tail -n 1 + dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0) The details of a data miscompare error are also emitted, but do not follow the above format. diff --git a/Documentation/driver-api/dmaengine/index.rst b/Documentation/driver-api/dmaengine/index.rst new file mode 100644 index 000000000000..3026fa975937 --- /dev/null +++ b/Documentation/driver-api/dmaengine/index.rst @@ -0,0 +1,55 @@ +======================= +DMAEngine documentation +======================= + +DMAEngine documentation provides documents for various aspects of DMAEngine +framework. + +DMAEngine documentation +----------------------- + +This book helps with DMAengine internal APIs and guide for DMAEngine device +driver writers. + +.. toctree:: + :maxdepth: 1 + + provider + +DMAEngine client documentation +------------------------------ + +This book is a guide to device driver writers on how to use the Slave-DMA +API of the DMAEngine. This is applicable only for slave DMA usage only. + +.. toctree:: + :maxdepth: 1 + + client + +DMA Test documentation +---------------------- + +This book introduces how to test DMA drivers using dmatest module. + +.. toctree:: + :maxdepth: 1 + + dmatest + +PXA DMA documentation +---------------------- + +This book adds some notes about PXA DMA + +.. toctree:: + :maxdepth: 1 + + pxa_dma + +.. only:: subproject + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst new file mode 100644 index 000000000000..814acb4d2294 --- /dev/null +++ b/Documentation/driver-api/dmaengine/provider.rst @@ -0,0 +1,508 @@ +================================== +DMAengine controller documentation +================================== + +Hardware Introduction +===================== + +Most of the Slave DMA controllers have the same general principles of +operations. + +They have a given number of channels to use for the DMA transfers, and +a given number of requests lines. + +Requests and channels are pretty much orthogonal. Channels can be used +to serve several to any requests. To simplify, channels are the +entities that will be doing the copy, and requests what endpoints are +involved. + +The request lines actually correspond to physical lines going from the +DMA-eligible devices to the controller itself. Whenever the device +will want to start a transfer, it will assert a DMA request (DRQ) by +asserting that request line. + +A very simple DMA controller would only take into account a single +parameter: the transfer size. At each clock cycle, it would transfer a +byte of data from one buffer to another, until the transfer size has +been reached. + +That wouldn't work well in the real world, since slave devices might +require a specific number of bits to be transferred in a single +cycle. For example, we may want to transfer as much data as the +physical bus allows to maximize performances when doing a simple +memory copy operation, but our audio device could have a narrower FIFO +that requires data to be written exactly 16 or 24 bits at a time. This +is why most if not all of the DMA controllers can adjust this, using a +parameter called the transfer width. + +Moreover, some DMA controllers, whenever the RAM is used as a source +or destination, can group the reads or writes in memory into a buffer, +so instead of having a lot of small memory accesses, which is not +really efficient, you'll get several bigger transfers. This is done +using a parameter called the burst size, that defines how many single +reads/writes it's allowed to do without the controller splitting the +transfer into smaller sub-transfers. + +Our theoretical DMA controller would then only be able to do transfers +that involve a single contiguous block of data. However, some of the +transfers we usually have are not, and want to copy data from +non-contiguous buffers to a contiguous buffer, which is called +scatter-gather. + +DMAEngine, at least for mem2dev transfers, require support for +scatter-gather. So we're left with two cases here: either we have a +quite simple DMA controller that doesn't support it, and we'll have to +implement it in software, or we have a more advanced DMA controller, +that implements in hardware scatter-gather. + +The latter are usually programmed using a collection of chunks to +transfer, and whenever the transfer is started, the controller will go +over that collection, doing whatever we programmed there. + +This collection is usually either a table or a linked list. You will +then push either the address of the table and its number of elements, +or the first item of the list to one channel of the DMA controller, +and whenever a DRQ will be asserted, it will go through the collection +to know where to fetch the data from. + +Either way, the format of this collection is completely dependent on +your hardware. Each DMA controller will require a different structure, +but all of them will require, for every chunk, at least the source and +destination addresses, whether it should increment these addresses or +not and the three parameters we saw earlier: the burst size, the +transfer width and the transfer size. + +The one last thing is that usually, slave devices won't issue DRQ by +default, and you have to enable this in your slave device driver first +whenever you're willing to use DMA. + +These were just the general memory-to-memory (also called mem2mem) or +memory-to-device (mem2dev) kind of transfers. Most devices often +support other kind of transfers or memory operations that dmaengine +support and will be detailed later in this document. + +DMA Support in Linux +==================== + +Historically, DMA controller drivers have been implemented using the +async TX API, to offload operations such as memory copy, XOR, +cryptography, etc., basically any memory to memory operation. + +Over time, the need for memory to device transfers arose, and +dmaengine was extended. Nowadays, the async TX API is written as a +layer on top of dmaengine, and acts as a client. Still, dmaengine +accommodates that API in some cases, and made some design choices to +ensure that it stayed compatible. + +For more information on the Async TX API, please look the relevant +documentation file in Documentation/crypto/async-tx-api.txt. + +DMAEngine APIs +============== + +``struct dma_device`` Initialization +------------------------------------ + +Just like any other kernel framework, the whole DMAEngine registration +relies on the driver filling a structure and registering against the +framework. In our case, that structure is dma_device. + +The first thing you need to do in your driver is to allocate this +structure. Any of the usual memory allocators will do, but you'll also +need to initialize a few fields in there: + +- channels: should be initialized as a list using the + INIT_LIST_HEAD macro for example + +- src_addr_widths: + should contain a bitmask of the supported source transfer width + +- dst_addr_widths: + should contain a bitmask of the supported destination transfer width + +- directions: + should contain a bitmask of the supported slave directions + (i.e. excluding mem2mem transfers) + +- residue_granularity: + + - Granularity of the transfer residue reported to dma_set_residue. + This can be either: + + - Descriptor + + - Your device doesn't support any kind of residue + reporting. The framework will only know that a particular + transaction descriptor is done. + + - Segment + + - Your device is able to report which chunks have been transferred + + - Burst + + - Your device is able to report which burst have been transferred + + - dev: should hold the pointer to the ``struct device`` associated + to your current driver instance. + +Supported transaction types +--------------------------- + +The next thing you need is to set which transaction types your device +(and driver) supports. + +Our ``dma_device structure`` has a field called cap_mask that holds the +various types of transaction supported, and you need to modify this +mask using the dma_cap_set function, with various flags depending on +transaction types you support as an argument. + +All those capabilities are defined in the ``dma_transaction_type enum``, +in ``include/linux/dmaengine.h`` + +Currently, the types available are: + +- DMA_MEMCPY + + - The device is able to do memory to memory copies + +- DMA_XOR + + - The device is able to perform XOR operations on memory areas + + - Used to accelerate XOR intensive tasks, such as RAID5 + +- DMA_XOR_VAL + + - The device is able to perform parity check using the XOR + algorithm against a memory buffer. + +- DMA_PQ + + - The device is able to perform RAID6 P+Q computations, P being a + simple XOR, and Q being a Reed-Solomon algorithm. + +- DMA_PQ_VAL + + - The device is able to perform parity check using RAID6 P+Q + algorithm against a memory buffer. + +- DMA_INTERRUPT + + - The device is able to trigger a dummy transfer that will + generate periodic interrupts + + - Used by the client drivers to register a callback that will be + called on a regular basis through the DMA controller interrupt + +- DMA_PRIVATE + + - The devices only supports slave transfers, and as such isn't + available for async transfers. + +- DMA_ASYNC_TX + + - Must not be set by the device, and will be set by the framework + if needed + + - TODO: What is it about? + +- DMA_SLAVE + + - The device can handle device to memory transfers, including + scatter-gather transfers. + + - While in the mem2mem case we were having two distinct types to + deal with a single chunk to copy or a collection of them, here, + we just have a single transaction type that is supposed to + handle both. + + - If you want to transfer a single contiguous memory buffer, + simply build a scatter list with only one item. + +- DMA_CYCLIC + + - The device can handle cyclic transfers. + + - A cyclic transfer is a transfer where the chunk collection will + loop over itself, with the last item pointing to the first. + + - It's usually used for audio transfers, where you want to operate + on a single ring buffer that you will fill with your audio data. + +- DMA_INTERLEAVE + + - The device supports interleaved transfer. + + - These transfers can transfer data from a non-contiguous buffer + to a non-contiguous buffer, opposed to DMA_SLAVE that can + transfer data from a non-contiguous data set to a continuous + destination buffer. + + - It's usually used for 2d content transfers, in which case you + want to transfer a portion of uncompressed data directly to the + display to print it + +These various types will also affect how the source and destination +addresses change over time. + +Addresses pointing to RAM are typically incremented (or decremented) +after each transfer. In case of a ring buffer, they may loop +(DMA_CYCLIC). Addresses pointing to a device's register (e.g. a FIFO) +are typically fixed. + +Device operations +----------------- + +Our dma_device structure also requires a few function pointers in +order to implement the actual logic, now that we described what +operations we were able to perform. + +The functions that we have to fill in there, and hence have to +implement, obviously depend on the transaction types you reported as +supported. + +- ``device_alloc_chan_resources`` + +- ``device_free_chan_resources`` + + - These functions will be called whenever a driver will call + ``dma_request_channel`` or ``dma_release_channel`` for the first/last + time on the channel associated to that driver. + + - They are in charge of allocating/freeing all the needed + resources in order for that channel to be useful for your driver. + + - These functions can sleep. + +- ``device_prep_dma_*`` + + - These functions are matching the capabilities you registered + previously. + + - These functions all take the buffer or the scatterlist relevant + for the transfer being prepared, and should create a hardware + descriptor or a list of hardware descriptors from it + + - These functions can be called from an interrupt context + + - Any allocation you might do should be using the GFP_NOWAIT + flag, in order not to potentially sleep, but without depleting + the emergency pool either. + + - Drivers should try to pre-allocate any memory they might need + during the transfer setup at probe time to avoid putting to + much pressure on the nowait allocator. + + - It should return a unique instance of the + ``dma_async_tx_descriptor structure``, that further represents this + particular transfer. + + - This structure can be initialized using the function + ``dma_async_tx_descriptor_init``. + + - You'll also need to set two fields in this structure: + + - flags: + TODO: Can it be modified by the driver itself, or + should it be always the flags passed in the arguments + + - tx_submit: A pointer to a function you have to implement, + that is supposed to push the current transaction descriptor to a + pending queue, waiting for issue_pending to be called. + + - In this structure the function pointer callback_result can be + initialized in order for the submitter to be notified that a + transaction has completed. In the earlier code the function pointer + callback has been used. However it does not provide any status to the + transaction and will be deprecated. The result structure defined as + ``dmaengine_result`` that is passed in to callback_result + has two fields: + + - result: This provides the transfer result defined by + ``dmaengine_tx_result``. Either success or some error condition. + + - residue: Provides the residue bytes of the transfer for those that + support residue. + +- ``device_issue_pending`` + + - Takes the first transaction descriptor in the pending queue, + and starts the transfer. Whenever that transfer is done, it + should move to the next transaction in the list. + + - This function can be called in an interrupt context + +- ``device_tx_status`` + + - Should report the bytes left to go over on the given channel + + - Should only care about the transaction descriptor passed as + argument, not the currently active one on a given channel + + - The tx_state argument might be NULL + + - Should use dma_set_residue to report it + + - In the case of a cyclic transfer, it should only take into + account the current period. + + - This function can be called in an interrupt context. + +- device_config + + - Reconfigures the channel with the configuration given as argument + + - This command should NOT perform synchronously, or on any + currently queued transfers, but only on subsequent ones + + - In this case, the function will receive a ``dma_slave_config`` + structure pointer as an argument, that will detail which + configuration to use. + + - Even though that structure contains a direction field, this + field is deprecated in favor of the direction argument given to + the prep_* functions + + - This call is mandatory for slave operations only. This should NOT be + set or expected to be set for memcpy operations. + If a driver support both, it should use this call for slave + operations only and not for memcpy ones. + +- device_pause + + - Pauses a transfer on the channel + + - This command should operate synchronously on the channel, + pausing right away the work of the given channel + +- device_resume + + - Resumes a transfer on the channel + + - This command should operate synchronously on the channel, + resuming right away the work of the given channel + +- device_terminate_all + + - Aborts all the pending and ongoing transfers on the channel + + - For aborted transfers the complete callback should not be called + + - Can be called from atomic context or from within a complete + callback of a descriptor. Must not sleep. Drivers must be able + to handle this correctly. + + - Termination may be asynchronous. The driver does not have to + wait until the currently active transfer has completely stopped. + See device_synchronize. + +- device_synchronize + + - Must synchronize the termination of a channel to the current + context. + + - Must make sure that memory for previously submitted + descriptors is no longer accessed by the DMA controller. + + - Must make sure that all complete callbacks for previously + submitted descriptors have finished running and none are + scheduled to run. + + - May sleep. + + +Misc notes +========== + +(stuff that should be documented, but don't really know +where to put them) + +``dma_run_dependencies`` + +- Should be called at the end of an async TX transfer, and can be + ignored in the slave transfers case. + +- Makes sure that dependent operations are run before marking it + as complete. + +dma_cookie_t + +- it's a DMA transaction ID that will increment over time. + +- Not really relevant any more since the introduction of ``virt-dma`` + that abstracts it away. + +DMA_CTRL_ACK + +- If clear, the descriptor cannot be reused by provider until the + client acknowledges receipt, i.e. has has a chance to establish any + dependency chains + +- This can be acked by invoking async_tx_ack() + +- If set, does not mean descriptor can be reused + +DMA_CTRL_REUSE + +- If set, the descriptor can be reused after being completed. It should + not be freed by provider if this flag is set. + +- The descriptor should be prepared for reuse by invoking + ``dmaengine_desc_set_reuse()`` which will set DMA_CTRL_REUSE. + +- ``dmaengine_desc_set_reuse()`` will succeed only when channel support + reusable descriptor as exhibited by capabilities + +- As a consequence, if a device driver wants to skip the + ``dma_map_sg()`` and ``dma_unmap_sg()`` in between 2 transfers, + because the DMA'd data wasn't used, it can resubmit the transfer right after + its completion. + +- Descriptor can be freed in few ways + + - Clearing DMA_CTRL_REUSE by invoking + ``dmaengine_desc_clear_reuse()`` and submitting for last txn + + - Explicitly invoking ``dmaengine_desc_free()``, this can succeed only + when DMA_CTRL_REUSE is already set + + - Terminating the channel + +- DMA_PREP_CMD + + - If set, the client driver tells DMA controller that passed data in DMA + API is command data. + + - Interpretation of command data is DMA controller specific. It can be + used for issuing commands to other peripherals/register reads/register + writes for which the descriptor should be in different format from + normal data descriptors. + +General Design Notes +==================== + +Most of the DMAEngine drivers you'll see are based on a similar design +that handles the end of transfer interrupts in the handler, but defer +most work to a tasklet, including the start of a new transfer whenever +the previous transfer ended. + +This is a rather inefficient design though, because the inter-transfer +latency will be not only the interrupt latency, but also the +scheduling latency of the tasklet, which will leave the channel idle +in between, which will slow down the global transfer rate. + +You should avoid this kind of practice, and instead of electing a new +transfer in your tasklet, move that part to the interrupt handler in +order to have a shorter idle window (that we can't really avoid +anyway). + +Glossary +======== + +- Burst: A number of consecutive read or write operations that + can be queued to buffers before being flushed to memory. + +- Chunk: A contiguous collection of bursts + +- Transfer: A collection of chunks (be it contiguous or not) diff --git a/Documentation/driver-api/dmaengine/pxa_dma.rst b/Documentation/driver-api/dmaengine/pxa_dma.rst new file mode 100644 index 000000000000..442ee691a190 --- /dev/null +++ b/Documentation/driver-api/dmaengine/pxa_dma.rst @@ -0,0 +1,190 @@ +============================== +PXA/MMP - DMA Slave controller +============================== + +Constraints +=========== + +a) Transfers hot queuing +A driver submitting a transfer and issuing it should be granted the transfer +is queued even on a running DMA channel. +This implies that the queuing doesn't wait for the previous transfer end, +and that the descriptor chaining is not only done in the irq/tasklet code +triggered by the end of the transfer. +A transfer which is submitted and issued on a phy doesn't wait for a phy to +stop and restart, but is submitted on a "running channel". The other +drivers, especially mmp_pdma waited for the phy to stop before relaunching +a new transfer. + +b) All transfers having asked for confirmation should be signaled +Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call. +This implies that even if an irq/tasklet is triggered by end of tx1, but +at the time of irq/dma tx2 is already finished, tx1->complete() and +tx2->complete() should be called. + +c) Channel running state +A driver should be able to query if a channel is running or not. For the +multimedia case, such as video capture, if a transfer is submitted and then +a check of the DMA channel reports a "stopped channel", the transfer should +not be issued until the next "start of frame interrupt", hence the need to +know if a channel is in running or stopped state. + +d) Bandwidth guarantee +The PXA architecture has 4 levels of DMAs priorities : high, normal, low. +The high priorities get twice as much bandwidth as the normal, which get twice +as much as the low priorities. +A driver should be able to request a priority, especially the real-time +ones such as pxa_camera with (big) throughputs. + +Design +====== +a) Virtual channels +Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual +channel" linked to the requestor line, and the physical DMA channel is +assigned on the fly when the transfer is issued. + +b) Transfer anatomy for a scatter-gather transfer + +:: + + +------------+-----+---------------+----------------+-----------------+ + | desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker | + +------------+-----+---------------+----------------+-----------------+ + +This structure is pointed by dma->sg_cpu. +The descriptors are used as follows : + + - desc-sg[i]: i-th descriptor, transferring the i-th sg + element to the video buffer scatter gather + + - status updater + Transfers a single u32 to a well known dma coherent memory to leave + a trace that this transfer is done. The "well known" is unique per + physical channel, meaning that a read of this value will tell which + is the last finished transfer at that point in time. + + - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN + + - linker: has ddadr= desc-sg[0] of next transfer, dcmd=0 + +c) Transfers hot-chaining +Suppose the running chain is: + +:: + + Buffer 1 Buffer 2 + +---------+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+---+ + | | + +----+ + +After a call to dmaengine_submit(b3), the chain will look like: + +:: + + Buffer 1 Buffer 2 Buffer 3 + +---------+----+---+ +----+----+----+---+ +----+----+----+---+ + | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f | + +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+ + | | | | + +----+ +----+ + new_link + +If while new_link was created the DMA channel stopped, it is _not_ +restarted. Hot-chaining doesn't break the assumption that +dma_async_issue_pending() is to be used to ensure the transfer is actually started. + +One exception to this rule : + +- if Buffer1 and Buffer2 had all their addresses 8 bytes aligned + +- and if Buffer3 has at least one address not 4 bytes aligned + +- then hot-chaining cannot happen, as the channel must be stopped, the + "align bit" must be set, and the channel restarted As a consequence, + such a transfer tx_submit() will be queued on the submitted queue, and + this specific case if the DMA is already running in aligned mode. + +d) Transfers completion updater +Each time a transfer is completed on a channel, an interrupt might be +generated or not, up to the client's request. But in each case, the last +descriptor of a transfer, the "status updater", will write the latest +transfer being completed into the physical channel's completion mark. + +This will speed up residue calculation, for large transfers such as video +buffers which hold around 6k descriptors or more. This also allows without +any lock to find out what is the latest completed transfer in a running +DMA chain. + +e) Transfers completion, irq and tasklet +When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq +is raised. Upon this interrupt, a tasklet is scheduled for the physical +channel. + +The tasklet is responsible for : + +- reading the physical channel last updater mark + +- calling all the transfer callbacks of finished transfers, based on + that mark, and each transfer flags. + +If a transfer is completed while this handling is done, a dma irq will +be raised, and the tasklet will be scheduled once again, having a new +updater mark. + +f) Residue +Residue granularity will be descriptor based. The issued but not completed +transfers will be scanned for all of their descriptors against the +currently running descriptor. + +g) Most complicated case of driver's tx queues +The most tricky situation is when : + + - there are not "acked" transfers (tx0) + + - a driver submitted an aligned tx1, not chained + + - a driver submitted an aligned tx2 => tx2 is cold chained to tx1 + + - a driver issued tx1+tx2 => channel is running in aligned mode + + - a driver submitted an aligned tx3 => tx3 is hot-chained + + - a driver submitted an unaligned tx4 => tx4 is put in submitted queue, + not chained + + - a driver issued tx4 => tx4 is put in issued queue, not chained + + - a driver submitted an aligned tx5 => tx5 is put in submitted queue, not + chained + + - a driver submitted an aligned tx6 => tx6 is put in submitted queue, + cold chained to tx5 + + This translates into (after tx4 is issued) : + + - issued queue + + :: + + +-----+ +-----+ +-----+ +-----+ + | tx1 | | tx2 | | tx3 | | tx4 | + +---|-+ ^---|-+ ^-----+ +-----+ + | | | | + +---+ +---+ + - submitted queue + +-----+ +-----+ + | tx5 | | tx6 | + +---|-+ ^-----+ + | | + +---+ + +- completed queue : empty + +- allocated queue : tx0 + +It should be noted that after tx3 is completed, the channel is stopped, and +restarted in "unaligned mode" to handle tx4. + +Author: Robert Jarzmik <robert.jarzmik@free.fr> diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 9c20624842b7..d17a9876b473 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -46,6 +46,7 @@ available subsections can be seen below. pinctl gpio misc_devices + dmaengine/index .. only:: subproject and html diff --git a/Documentation/driver-api/usb/usb.rst b/Documentation/driver-api/usb/usb.rst index dba0f876b36f..078e981e2b16 100644 --- a/Documentation/driver-api/usb/usb.rst +++ b/Documentation/driver-api/usb/usb.rst @@ -690,9 +690,7 @@ The USB devices are now exported via debugfs: This file is handy for status viewing tools in user mode, which can scan the text format and ignore most of it. More detailed device status (including class and vendor status) is available from device-specific -files. For information about the current format of this file, see the -``Documentation/usb/proc_usb_info.txt`` file in your Linux kernel -sources. +files. For information about the current format of this file, see below. This file, in combination with the poll() system call, can also be used to detect when devices are added or removed:: diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index a38d3aa4d189..79c22d096bbc 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -77,8 +77,8 @@ C. Boot options 1. fbcon=font:<name> Select the initial font to use. The value 'name' can be any of the - compiled-in fonts: VGA8x16, 7x14, 10x18, VGA8x8, MINI4x6, RomanLarge, - SUN8x16, SUN12x22, ProFont6x11, Acorn8x8, PEARL8x8. + compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6, + PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, VGA8x16, VGA8x8. Note, not all drivers can handle font with widths not divisible by 8, such as vga16fb. diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 76bbd7fe27b3..f377290fe48e 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -34,6 +34,6 @@ | tile: | TODO | | um: | TODO | | unicore32: | TODO | - | x86: | ok | + | x86: | ok | 64-bit only | xtensa: | TODO | ----------------------- diff --git a/Documentation/filesystems/dnotify.txt b/Documentation/filesystems/dnotify.txt index 6baf88f46859..15156883d321 100644 --- a/Documentation/filesystems/dnotify.txt +++ b/Documentation/filesystems/dnotify.txt @@ -62,7 +62,7 @@ disabled, fcntl(fd, F_NOTIFY, ...) will return -EINVAL. Example ------- -See Documentation/filesystems/dnotify_test.c for an example. +See tools/testing/selftests/filesystems/dnotify_test.c for an example. NOTE ---- diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 5a8f7f4d2bca..75236c0c2ac2 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -94,10 +94,10 @@ Note: More extensive information for getting started with ext4 can be * ability to pack bitmaps and inode tables into larger virtual groups via the flex_bg feature * large file support -* Inode allocation using large virtual block groups via flex_bg +* inode allocation using large virtual block groups via flex_bg * delayed allocation * large block (up to pagesize) support -* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force +* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force the ordering) [1] Filesystems with a block size of 1k may see a limit imposed by the @@ -105,7 +105,7 @@ directory hash tree having a maximum depth of two. 2.2 Candidate features for future inclusion -* Online defrag (patches available but not well tested) +* online defrag (patches available but not well tested) * reduced mke2fs time via lazy itable initialization in conjunction with the uninit_bg feature (capability to do this is available in e2fsprogs but a kernel thread to do lazy zeroing of unused inode table blocks @@ -602,7 +602,7 @@ Table of Ext4 specific ioctls bitmaps and inode table, the userspace tool thus just passes the new number of blocks. -EXT4_IOC_SWAP_BOOT Swap i_blocks and associated attributes + EXT4_IOC_SWAP_BOOT Swap i_blocks and associated attributes (like i_blocks, i_size, i_flags, ...) from the specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is typically diff --git a/Documentation/hid/hiddev.txt b/Documentation/hid/hiddev.txt index 6e8c9f1d2f22..638448707aa2 100644 --- a/Documentation/hid/hiddev.txt +++ b/Documentation/hid/hiddev.txt @@ -12,7 +12,7 @@ To support these disparate requirements, the Linux USB system provides HID events to two separate interfaces: * the input subsystem, which converts HID events into normal input device interfaces (such as keyboard, mouse and joystick) and a -normalised event interface - see Documentation/input/input.txt +normalised event interface - see Documentation/input/input.rst * the hiddev interface, which provides fairly raw HID events The data flow for a HID event produced by a device is something like diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst index 5a709ab77c8d..b8bd65962dd8 100644 --- a/Documentation/input/devices/xpad.rst +++ b/Documentation/input/devices/xpad.rst @@ -230,4 +230,5 @@ Historic Edits 2005-03-19 - Dominic Cerquetti <binary1230@yahoo.com> - added stuff for dance pads, new d-pad->axes mappings -Later changes may be viewed with 'git log Documentation/input/xpad.txt' +Later changes may be viewed with +'git log --follow Documentation/input/devices/xpad.rst' diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt index 19276f5d195c..1c707fc9b141 100644 --- a/Documentation/laptops/laptop-mode.txt +++ b/Documentation/laptops/laptop-mode.txt @@ -184,7 +184,7 @@ is done when dirty_ratio is reached. DO_CPU: Enable CPU frequency scaling when in laptop mode. (Requires CPUFreq to be setup. -See Documentation/cpu-freq/user-guide.txt for more info. Disabled by default.) +See Documentation/admin-guide/pm/cpufreq.rst for more info. Disabled by default.) CPU_MAXFREQ: @@ -287,7 +287,7 @@ MINIMUM_BATTERY_MINUTES=10 # Should the maximum CPU frequency be adjusted down while on battery? # Requires CPUFreq to be setup. -# See Documentation/cpu-freq/user-guide.txt for more info +# See Documentation/admin-guide/pm/cpufreq.rst for more info #DO_CPU=0 # When on battery what is the maximum CPU speed that the system should @@ -378,7 +378,7 @@ BATT_HD=${BATT_HD:-'4'} DIRTY_RATIO=${DIRTY_RATIO:-'40'} # cpu frequency scaling -# See Documentation/cpu-freq/user-guide.txt for more info +# See Documentation/admin-guide/pm/cpufreq.rst for more info DO_CPU=${CPU_MANAGE:-'0'} CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'} diff --git a/Documentation/locking/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.txt index 6c6e8c2410de..3d7b865539cc 100644 --- a/Documentation/locking/rt-mutex-design.txt +++ b/Documentation/locking/rt-mutex-design.txt @@ -8,7 +8,7 @@ RT-mutex implementation design This document tries to describe the design of the rtmutex.c implementation. It doesn't describe the reasons why rtmutex.c exists. For that please see -Documentation/rt-mutex.txt. Although this document does explain problems +Documentation/locking/rt-mutex.txt. Although this document does explain problems that happen without this code, but that is in the concept to understand what the code actually is doing. diff --git a/Documentation/media/dvb-drivers/bt8xx.rst b/Documentation/media/dvb-drivers/bt8xx.rst index b43958b7340c..e3e387bdf498 100644 --- a/Documentation/media/dvb-drivers/bt8xx.rst +++ b/Documentation/media/dvb-drivers/bt8xx.rst @@ -18,7 +18,7 @@ General information This class of cards has a bt878a as the PCI interface, and require the bttv driver for accessing the i2c bus and the gpio pins of the bt8xx chipset. -Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge: +Please see Documentation/media/dvb-drivers/cards.rst => o Cards based on the Conexant Bt8xx PCI bridge: Compiling kernel please enable: @@ -45,7 +45,7 @@ Loading Modules Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically. Exceptions are: - Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom. -People running udev please see Documentation/dvb/udev.txt. +People running udev please see Documentation/media/dvb-drivers/udev.rst. In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary: @@ -72,7 +72,7 @@ Useful parameters for verbosity level and debugging the dst module: The autodetected values are determined by the cards' "response string". In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI]. For bug reports please send in a complete log with verbose=4 activated. -Please also see Documentation/dvb/ci.txt. +Please also see Documentation/media/dvb-drivers/ci.rst. Running multiple cards ~~~~~~~~~~~~~~~~~~~~~~ @@ -100,7 +100,7 @@ Examples of card ID's: $ modprobe bttv card=113 card=135 -For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv. +For a full list of card ID's please see Documentation/media/v4l-drivers/bttv-cardlist.rst. In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. Probing the cards with broken PCI subsystem ID diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst index 9d6c860271cb..d311a6866b3b 100644 --- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst @@ -431,7 +431,7 @@ MPEG stream. *Historical context*: This format specification originates from a custom, embedded, sliced VBI data format used by the ``ivtv`` driver. This format has already been informally specified in the kernel sources -in the file ``Documentation/video4linux/cx2341x/README.vbi`` . The +in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` . The maximum size of the payload and other aspects of this format are driven by the CX23415 MPEG decoder's capabilities and limitations with respect to extracting, decoding, and displaying sliced VBI data embedded within diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index a3e81c1d276b..dfe49ae57e78 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -284,7 +284,7 @@ enum v4l2_mpeg_stream_vbi_fmt - * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV`` - VBI in private packets, IVTV format (documented in the kernel sources in the file - ``Documentation/video4linux/cx2341x/README.vbi``) + ``Documentation/media/v4l-drivers/cx2341x.rst``) diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index 521adb795535..38af1472a4b4 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -52,7 +52,7 @@ please make a proposal on the linux-media mailing list. `http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__ The format is documented in the kernel sources in the file - ``Documentation/video4linux/cx2341x/README.hm12`` + ``Documentation/media/v4l-drivers/cx2341x.rst`` * .. _V4L2-PIX-FMT-CPIA1: - ``V4L2_PIX_FMT_CPIA1`` diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst index 195ccaac2816..5f35e2fb5afa 100644 --- a/Documentation/media/v4l-drivers/bttv.rst +++ b/Documentation/media/v4l-drivers/bttv.rst @@ -307,7 +307,7 @@ console and let some terminal application log the messages. /me uses screen. See Documentation/admin-guide/serial-console.rst for details on setting up a serial console. -Read Documentation/admin-guide/oops-tracing.rst to learn how to get any useful +Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful information out of a register+stack dump printed by the kernel on protection faults (so-called "kernel oops"). diff --git a/Documentation/media/v4l-drivers/max2175.rst b/Documentation/media/v4l-drivers/max2175.rst index 04478c25d57a..b1a4c89fd869 100644 --- a/Documentation/media/v4l-drivers/max2175.rst +++ b/Documentation/media/v4l-drivers/max2175.rst @@ -7,7 +7,7 @@ The MAX2175 driver implements the following driver-specific controls: ------------------------------- Enable/Disable I2S output of the tuner. This is a private control that can be accessed only using the subdev interface. - Refer to Documentation/media/kapi/v4l2-controls for more details. + Refer to Documentation/media/kapi/v4l2-controls.rst for more details. .. flat-table:: :header-rows: 0 diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt index e4c376abbdad..4e68f0bc5dba 100644 --- a/Documentation/networking/cdc_mbim.txt +++ b/Documentation/networking/cdc_mbim.txt @@ -332,8 +332,8 @@ References [5] "MBIM (Mobile Broadband Interface Model) Registry" - http://compliance.usb.org/mbim/ -[6] "/dev/bus/usb filesystem output" - - Documentation/usb/proc_usb_info.txt +[6] "/sys/kernel/debug/usb/devices output format" + - Documentation/driver-api/usb/usb.rst [7] "/sys/bus/usb/devices/.../descriptors" - Documentation/ABI/stable/sysfs-bus-usb diff --git a/Documentation/networking/checksum-offloads.txt b/Documentation/networking/checksum-offloads.txt index d52d191bbb0c..27bc09cfcf6d 100644 --- a/Documentation/networking/checksum-offloads.txt +++ b/Documentation/networking/checksum-offloads.txt @@ -47,7 +47,7 @@ The requirements for GSO are more complicated, because when segmenting an (section 'E') for more details. A driver declares its offload capabilities in netdev->hw_features; see - Documentation/networking/netdev-features for more. Note that a device + Documentation/networking/netdev-features.txt for more. Note that a device which only advertises NETIF_F_IP[V6]_CSUM must still obey the csum_start and csum_offset given in the SKB; if it tries to deduce these itself in hardware (as some NICs do) the driver should check that the values in the diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index f3b9e507ab05..bf654845556e 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -1055,7 +1055,7 @@ TX_RING part only TP_STATUS_AVAILABLE is set, then the tp_sec and tp_{n,u}sec members do not contain a valid value. For TX_RINGs, by default no timestamp is generated! -See include/linux/net_tstamp.h and Documentation/networking/timestamping +See include/linux/net_tstamp.h and Documentation/networking/timestamping.txt for more information on hardware timestamps. ------------------------------------------------------------------------------- diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt index aafddbee7377..b154f6c0c36e 100644 --- a/Documentation/pi-futex.txt +++ b/Documentation/pi-futex.txt @@ -119,4 +119,4 @@ properties of futexes, and all four combinations are possible: futex, robust-futex, PI-futex, robust+PI-futex. More details about priority inheritance can be found in -Documentation/rt-mutex.txt. +Documentation/locking/rt-mutex.txt. diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index 974916ff6608..27df7f98668a 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -24,7 +24,8 @@ platform. If one of the strings listed in /sys/power/state is written to it, the system will attempt to transition into the corresponding sleep state. Refer to -Documentation/power/states.txt for a description of each of those states. +Documentation/admin-guide/pm/sleep-states.rst for a description of each of +those states. /sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk). Specifically, it tells the kernel what to do after creating a hibernation image. @@ -42,7 +43,7 @@ The currently selected option is printed in square brackets. The 'platform' option is only available if the platform provides a special mechanism to put the system to sleep after creating a hibernation image (ACPI does that, for example). The 'suspend' option is available if Suspend-to-RAM -is supported. Refer to Documentation/power/basic_pm_debugging.txt for the +is supported. Refer to Documentation/power/basic-pm-debugging.txt for the description of the 'test_resume' option. To select an option, write the string representing it to /sys/power/disk. diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index a1b7f7158930..d17fdf8f45ef 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -8,7 +8,7 @@ management. Based on previous work by Patrick Mochel <mochel@transmeta.com> This document only covers the aspects of power management specific to PCI devices. For general description of the kernel's interfaces related to device -power management refer to Documentation/power/admin-guide/devices.rst and +power management refer to Documentation/driver-api/pm/devices.rst and Documentation/power/runtime_pm.txt. --------------------------------------------------------------------------- @@ -417,7 +417,7 @@ pm->runtime_idle() callback. 2.4. System-Wide Power Transitions ---------------------------------- There are a few different types of system-wide power transitions, described in -Documentation/power/admin-guide/devices.rst. Each of them requires devices to be handled +Documentation/driver-api/pm/devices.rst. Each of them requires devices to be handled in a specific way and the PM core executes subsystem-level power management callbacks for this purpose. They are executed in phases such that each phase involves executing the same subsystem-level callback for every device belonging @@ -623,7 +623,7 @@ System restore requires a hibernation image to be loaded into memory and the pre-hibernation memory contents to be restored before the pre-hibernation system activity can be resumed. -As described in Documentation/power/admin-guide/devices.rst, the hibernation image is loaded +As described in Documentation/driver-api/pm/devices.rst, the hibernation image is loaded into memory by a fresh instance of the kernel, called the boot kernel, which in turn is loaded and run by a boot loader in the usual way. After the boot kernel has loaded the image, it needs to replace its own code and data with the code @@ -677,7 +677,7 @@ controlling the runtime power management of their devices. At the time of this writing there are two ways to define power management callbacks for a PCI device driver, the recommended one, based on using a -dev_pm_ops structure described in Documentation/power/admin-guide/devices.rst, and the +dev_pm_ops structure described in Documentation/driver-api/pm/devices.rst, and the "legacy" one, in which the .suspend(), .suspend_late(), .resume_early(), and .resume() callbacks from struct pci_driver are used. The legacy approach, however, doesn't allow one to define runtime power management callbacks and is @@ -1046,5 +1046,5 @@ PCI Local Bus Specification, Rev. 3.0 PCI Bus Power Management Interface Specification, Rev. 1.2 Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b PCI Express Base Specification, Rev. 2.0 -Documentation/power/admin-guide/devices.rst +Documentation/driver-api/pm/devices.rst Documentation/power/runtime_pm.txt diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 625549d4c74a..57af2f7963ee 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -680,7 +680,7 @@ left in runtime suspend. If that happens, the PM core will not execute any system suspend and resume callbacks for all of those devices, except for the complete callback, which is then entirely responsible for handling the device as appropriate. This only applies to system suspend transitions that are not -related to hibernation (see Documentation/power/admin-guide/devices.rst for more +related to hibernation (see Documentation/driver-api/pm/devices.rst for more information). The PM core does its best to reduce the probability of race conditions between diff --git a/Documentation/process/3.Early-stage.rst b/Documentation/process/3.Early-stage.rst index af2c0af931d6..be00716071d4 100644 --- a/Documentation/process/3.Early-stage.rst +++ b/Documentation/process/3.Early-stage.rst @@ -178,7 +178,7 @@ matter is (1) kernel developers tend to be busy, (2) there is no shortage of people with grand plans and little code (or even prospect of code) to back them up, and (3) nobody is obligated to review or comment on ideas posted by others. Beyond that, high-level designs often hide problems -which are only reviewed when somebody actually tries to implement those +which are only revealed when somebody actually tries to implement those designs; for that reason, kernel developers would rather see the code. If a request-for-comments posting yields little in the way of comments, do diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst index 6df19943dd4d..26b106071364 100644 --- a/Documentation/process/4.Coding.rst +++ b/Documentation/process/4.Coding.rst @@ -307,7 +307,7 @@ variety of potential coding problems; it can also propose fixes for those problems. Quite a few "semantic patches" for the kernel have been packaged under the scripts/coccinelle directory; running "make coccicheck" will run through those semantic patches and report on any problems found. See -Documentation/coccinelle.txt for more information. +Documentation/dev-tools/coccinelle.rst for more information. Other kinds of portability errors are best found by compiling your code for other architectures. If you do not happen to have an S/390 system or a diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 61e43cc3ed17..a430f6eee756 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -26,6 +26,7 @@ Below are the essential guides that every developer should read. coding-style email-clients kernel-enforcement-statement + kernel-driver-statement Other guides to the community that are of interest to most developers are: diff --git a/Documentation/process/kernel-driver-statement.rst b/Documentation/process/kernel-driver-statement.rst new file mode 100644 index 000000000000..60d9d868f300 --- /dev/null +++ b/Documentation/process/kernel-driver-statement.rst @@ -0,0 +1,199 @@ +Kernel Driver Statement +----------------------- + +Position Statement on Linux Kernel Modules +========================================== + + +We, the undersigned Linux kernel developers, consider any closed-source +Linux kernel module or driver to be harmful and undesirable. We have +repeatedly found them to be detrimental to Linux users, businesses, and +the greater Linux ecosystem. Such modules negate the openness, +stability, flexibility, and maintainability of the Linux development +model and shut their users off from the expertise of the Linux +community. Vendors that provide closed-source kernel modules force their +customers to give up key Linux advantages or choose new vendors. +Therefore, in order to take full advantage of the cost savings and +shared support benefits open source has to offer, we urge vendors to +adopt a policy of supporting their customers on Linux with open-source +kernel code. + +We speak only for ourselves, and not for any company we might work for +today, have in the past, or will in the future. + + - Dave Airlie + - Nick Andrew + - Jens Axboe + - Ralf Baechle + - Felipe Balbi + - Ohad Ben-Cohen + - Muli Ben-Yehuda + - Jiri Benc + - Arnd Bergmann + - Thomas Bogendoerfer + - Vitaly Bordug + - James Bottomley + - Josh Boyer + - Neil Brown + - Mark Brown + - David Brownell + - Michael Buesch + - Franck Bui-Huu + - Adrian Bunk + - François Cami + - Ralph Campbell + - Luiz Fernando N. Capitulino + - Mauro Carvalho Chehab + - Denis Cheng + - Jonathan Corbet + - Glauber Costa + - Alan Cox + - Magnus Damm + - Ahmed S. Darwish + - Robert P. J. Day + - Hans de Goede + - Arnaldo Carvalho de Melo + - Helge Deller + - Jean Delvare + - Mathieu Desnoyers + - Sven-Thorsten Dietrich + - Alexey Dobriyan + - Daniel Drake + - Alex Dubov + - Randy Dunlap + - Michael Ellerman + - Pekka Enberg + - Jan Engelhardt + - Mark Fasheh + - J. Bruce Fields + - Larry Finger + - Jeremy Fitzhardinge + - Mike Frysinger + - Kumar Gala + - Robin Getz + - Liam Girdwood + - Jan-Benedict Glaw + - Thomas Gleixner + - Brice Goglin + - Cyrill Gorcunov + - Andy Gospodarek + - Thomas Graf + - Krzysztof Halasa + - Harvey Harrison + - Stephen Hemminger + - Michael Hennerich + - Tejun Heo + - Benjamin Herrenschmidt + - Kristian Høgsberg + - Henrique de Moraes Holschuh + - Marcel Holtmann + - Mike Isely + - Takashi Iwai + - Olof Johansson + - Dave Jones + - Jesper Juhl + - Matthias Kaehlcke + - Kenji Kaneshige + - Jan Kara + - Jeremy Kerr + - Russell King + - Olaf Kirch + - Roel Kluin + - Hans-Jürgen Koch + - Auke Kok + - Peter Korsgaard + - Jiri Kosina + - Mariusz Kozlowski + - Greg Kroah-Hartman + - Michael Krufky + - Aneesh Kumar + - Clemens Ladisch + - Christoph Lameter + - Gunnar Larisch + - Anders Larsen + - Grant Likely + - John W. Linville + - Yinghai Lu + - Tony Luck + - Pavel Machek + - Matt Mackall + - Paul Mackerras + - Roland McGrath + - Patrick McHardy + - Kyle McMartin + - Paul Menage + - Thierry Merle + - Eric Miao + - Akinobu Mita + - Ingo Molnar + - James Morris + - Andrew Morton + - Paul Mundt + - Oleg Nesterov + - Luca Olivetti + - S.Çağlar Onur + - Pierre Ossman + - Keith Owens + - Venkatesh Pallipadi + - Nick Piggin + - Nicolas Pitre + - Evgeniy Polyakov + - Richard Purdie + - Mike Rapoport + - Sam Ravnborg + - Gerrit Renker + - Stefan Richter + - David Rientjes + - Luis R. Rodriguez + - Stefan Roese + - Francois Romieu + - Rami Rosen + - Stephen Rothwell + - Maciej W. Rozycki + - Mark Salyzyn + - Yoshinori Sato + - Deepak Saxena + - Holger Schurig + - Amit Shah + - Yoshihiro Shimoda + - Sergei Shtylyov + - Kay Sievers + - Sebastian Siewior + - Rik Snel + - Jes Sorensen + - Alexey Starikovskiy + - Alan Stern + - Timur Tabi + - Hirokazu Takata + - Eliezer Tamir + - Eugene Teo + - Doug Thompson + - FUJITA Tomonori + - Dmitry Torokhov + - Marcelo Tosatti + - Steven Toth + - Theodore Tso + - Matthias Urlichs + - Geert Uytterhoeven + - Arjan van de Ven + - Ivo van Doorn + - Rik van Riel + - Wim Van Sebroeck + - Hans Verkuil + - Horst H. von Brand + - Dmitri Vorobiev + - Anton Vorontsov + - Daniel Walker + - Johannes Weiner + - Harald Welte + - Matthew Wilcox + - Dan J. Williams + - Darrick J. Wong + - David Woodhouse + - Chris Wright + - Bryan Wu + - Rafael J. Wysocki + - Herbert Xu + - Vlad Yasevich + - Peter Zijlstra + - Bartlomiej Zolnierkiewicz diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst index afb82ee0cbea..b38bf2054ce3 100644 --- a/Documentation/process/submitting-drivers.rst +++ b/Documentation/process/submitting-drivers.rst @@ -117,7 +117,7 @@ PM support: anything. For the driver testing instructions see Documentation/power/drivers-testing.txt and for a relatively complete overview of the power management issues related to - drivers see Documentation/power/admin-guide/devices.rst . + drivers see Documentation/driver-api/pm/devices.rst. Control: In general if there is active maintenance of a driver by diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 733478ade91b..1ef19d3a3eee 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -621,14 +621,14 @@ The canonical patch subject line is:: The canonical patch message body contains the following: - - A ``from`` line specifying the patch author (only needed if the person - sending the patch is not the author). - - - An empty line. + - A ``from`` line specifying the patch author, followed by an empty + line (only needed if the person sending the patch is not the author). - The body of the explanation, line wrapped at 75 columns, which will be copied to the permanent changelog to describe this patch. + - An empty line. + - The ``Signed-off-by:`` lines, described above, which will also go in the changelog. diff --git a/Documentation/security/LSM.rst b/Documentation/security/LSM.rst index d75778b0fa10..98522e0e1ee2 100644 --- a/Documentation/security/LSM.rst +++ b/Documentation/security/LSM.rst @@ -5,7 +5,7 @@ Linux Security Module Development Based on https://lkml.org/lkml/2007/10/26/215, a new LSM is accepted into the kernel when its intent (a description of what it tries to protect against and in what cases one would expect to -use it) has been appropriately documented in ``Documentation/security/LSM``. +use it) has been appropriately documented in ``Documentation/security/LSM.rst``. This allows an LSM's code to be easily compared to its goals, and so that end users and distros can make a more informed decision about which LSMs suit their requirements. diff --git a/Documentation/security/credentials.rst b/Documentation/security/credentials.rst index 038a7e19eff9..66a2e24939d8 100644 --- a/Documentation/security/credentials.rst +++ b/Documentation/security/credentials.rst @@ -196,7 +196,7 @@ The Linux kernel supports the following types of credentials: When a process accesses a key, if not already present, it will normally be cached on one of these keyrings for future accesses to find. - For more information on using keys, see Documentation/security/keys.txt. + For more information on using keys, see ``Documentation/security/keys/*``. 5. LSM diff --git a/Documentation/security/keys/request-key.rst b/Documentation/security/keys/request-key.rst index b2d16abaa9e9..21e27238cec6 100644 --- a/Documentation/security/keys/request-key.rst +++ b/Documentation/security/keys/request-key.rst @@ -3,7 +3,7 @@ Key Request Service =================== The key request service is part of the key retention service (refer to -Documentation/security/core.rst). This document explains more fully how +Documentation/security/keys/core.rst). This document explains more fully how the requesting algorithm works. The process starts by either the kernel requesting a service by calling diff --git a/Documentation/sound/cards/joystick.rst b/Documentation/sound/cards/joystick.rst index a6e468c81d02..488946fc1079 100644 --- a/Documentation/sound/cards/joystick.rst +++ b/Documentation/sound/cards/joystick.rst @@ -11,7 +11,7 @@ General First of all, you need to enable GAMEPORT support on Linux kernel for using a joystick with the ALSA driver. For the details of gameport -support, refer to Documentation/input/joystick.txt. +support, refer to Documentation/input/joydev/joystick.rst. The joystick support of ALSA drivers is different between ISA and PCI cards. In the case of ISA (PnP) cards, it's usually handled by the diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst index f59c3cdbfaf4..9f7347830ba4 100644 --- a/Documentation/sound/hd-audio/notes.rst +++ b/Documentation/sound/hd-audio/notes.rst @@ -192,7 +192,7 @@ preset model instead of PCI (and codec-) SSID look-up. What ``model`` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/HD-Audio-Models.rst file, +chip. Then, see Documentation/sound/hd-audio/models.rst file, the section of HD-audio driver. You can find a list of codecs and ``model`` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass ``model=ultra`` for devices that are compatible diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index 58ffa3f5bda7..a0b268466cb1 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -2498,7 +2498,7 @@ Mic boost Mic-boost switch is set as “Mic Boost” or “Mic Boost (6dB)”. More precise information can be found in -``Documentation/sound/alsa/ControlNames.txt``. +``Documentation/sound/designs/control-names.rst``. Access Flags ------------ diff --git a/Documentation/sysctl/README b/Documentation/sysctl/README index 91f54ffa0077..d5f24ab0ecc3 100644 --- a/Documentation/sysctl/README +++ b/Documentation/sysctl/README @@ -60,7 +60,7 @@ debug/ <empty> dev/ device specific information (eg dev/cdrom/info) fs/ specific filesystems filehandle, inode, dentry and quota tuning - binfmt_misc <Documentation/binfmt_misc.txt> + binfmt_misc <Documentation/admin-guide/binfmt-misc.rst> kernel/ global kernel info / tuning miscellaneous stuff net/ networking stuff, for documentation look in: diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 35e17f748ca7..6c00c1e2743f 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -277,7 +277,7 @@ in a mount namespace. ---------------------------------------------------------- Documentation for the files in /proc/sys/fs/binfmt_misc is -in Documentation/binfmt_misc.txt. +in Documentation/admin-guide/binfmt-misc.rst. 3. /proc/sys/fs/mqueue - POSIX message queues filesystem diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index e8789976e77c..9d88f67781c2 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -4,10 +4,10 @@ High resolution timers and dynamic ticks design notes Further information can be found in the paper of the OLS 2006 talk "hrtimers and beyond". The paper is part of the OLS 2006 Proceedings Volume 1, which can be found on the OLS website: -http://www.linuxsymposium.org/2006/linuxsymposium_procv1.pdf +https://www.kernel.org/doc/ols/2006/ols2006v1-pages-333-346.pdf The slides to this talk are available from: -http://tglx.de/projects/hrtimers/ols2006-hrtimers.pdf +http://www.cs.columbia.edu/~nahum/w6998/papers/ols2006-hrtimers-slides.pdf The slides contain five figures (pages 2, 15, 18, 20, 22), which illustrate the changes in the time(r) related Linux subsystems. Figure #1 (p. 2) shows the diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst new file mode 100644 index 000000000000..8494a801d341 --- /dev/null +++ b/Documentation/trace/ftrace-uses.rst @@ -0,0 +1,293 @@ +================================= +Using ftrace to hook to functions +================================= + +.. Copyright 2017 VMware Inc. +.. Author: Steven Rostedt <srostedt@goodmis.org> +.. License: The GNU Free Documentation License, Version 1.2 +.. (dual licensed under the GPL v2) + +Written for: 4.14 + +Introduction +============ + +The ftrace infrastructure was originially created to attach callbacks to the +beginning of functions in order to record and trace the flow of the kernel. +But callbacks to the start of a function can have other use cases. Either +for live kernel patching, or for security monitoring. This document describes +how to use ftrace to implement your own function callbacks. + + +The ftrace context +================== + +WARNING: The ability to add a callback to almost any function within the +kernel comes with risks. A callback can be called from any context +(normal, softirq, irq, and NMI). Callbacks can also be called just before +going to idle, during CPU bring up and takedown, or going to user space. +This requires extra care to what can be done inside a callback. A callback +can be called outside the protective scope of RCU. + +The ftrace infrastructure has some protections agains recursions and RCU +but one must still be very careful how they use the callbacks. + + +The ftrace_ops structure +======================== + +To register a function callback, a ftrace_ops is required. This structure +is used to tell ftrace what function should be called as the callback +as well as what protections the callback will perform and not require +ftrace to handle. + +There is only one field that is needed to be set when registering +an ftrace_ops with ftrace:: + +.. code-block: c + + struct ftrace_ops ops = { + .func = my_callback_func, + .flags = MY_FTRACE_FLAGS + .private = any_private_data_structure, + }; + +Both .flags and .private are optional. Only .func is required. + +To enable tracing call:: + +.. c:function:: register_ftrace_function(&ops); + +To disable tracing call:: + +.. c:function:: unregister_ftrace_function(&ops); + +The above is defined by including the header:: + +.. c:function:: #include <linux/ftrace.h> + +The registered callback will start being called some time after the +register_ftrace_function() is called and before it returns. The exact time +that callbacks start being called is dependent upon architecture and scheduling +of services. The callback itself will have to handle any synchronization if it +must begin at an exact moment. + +The unregister_ftrace_function() will guarantee that the callback is +no longer being called by functions after the unregister_ftrace_function() +returns. Note that to perform this guarantee, the unregister_ftrace_function() +may take some time to finish. + + +The callback function +===================== + +The prototype of the callback function is as follows (as of v4.14):: + +.. code-block: c + + void callback_func(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *op, struct pt_regs *regs); + +@ip + This is the instruction pointer of the function that is being traced. + (where the fentry or mcount is within the function) + +@parent_ip + This is the instruction pointer of the function that called the + the function being traced (where the call of the function occurred). + +@op + This is a pointer to ftrace_ops that was used to register the callback. + This can be used to pass data to the callback via the private pointer. + +@regs + If the FTRACE_OPS_FL_SAVE_REGS or FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED + flags are set in the ftrace_ops structure, then this will be pointing + to the pt_regs structure like it would be if an breakpoint was placed + at the start of the function where ftrace was tracing. Otherwise it + either contains garbage, or NULL. + + +The ftrace FLAGS +================ + +The ftrace_ops flags are all defined and documented in include/linux/ftrace.h. +Some of the flags are used for internal infrastructure of ftrace, but the +ones that users should be aware of are the following: + +FTRACE_OPS_FL_SAVE_REGS + If the callback requires reading or modifying the pt_regs + passed to the callback, then it must set this flag. Registering + a ftrace_ops with this flag set on an architecture that does not + support passing of pt_regs to the callback will fail. + +FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED + Similar to SAVE_REGS but the registering of a + ftrace_ops on an architecture that does not support passing of regs + will not fail with this flag set. But the callback must check if + regs is NULL or not to determine if the architecture supports it. + +FTRACE_OPS_FL_RECURSION_SAFE + By default, a wrapper is added around the callback to + make sure that recursion of the function does not occur. That is, + if a function that is called as a result of the callback's execution + is also traced, ftrace will prevent the callback from being called + again. But this wrapper adds some overhead, and if the callback is + safe from recursion, it can set this flag to disable the ftrace + protection. + + Note, if this flag is set, and recursion does occur, it could cause + the system to crash, and possibly reboot via a triple fault. + + It is OK if another callback traces a function that is called by a + callback that is marked recursion safe. Recursion safe callbacks + must never trace any function that are called by the callback + itself or any nested functions that those functions call. + + If this flag is set, it is possible that the callback will also + be called with preemption enabled (when CONFIG_PREEMPT is set), + but this is not guaranteed. + +FTRACE_OPS_FL_IPMODIFY + Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack" + the traced function (have another function called instead of the + traced function), it requires setting this flag. This is what live + kernel patches uses. Without this flag the pt_regs->ip can not be + modified. + + Note, only one ftrace_ops with FTRACE_OPS_FL_IPMODIFY set may be + registered to any given function at a time. + +FTRACE_OPS_FL_RCU + If this is set, then the callback will only be called by functions + where RCU is "watching". This is required if the callback function + performs any rcu_read_lock() operation. + + RCU stops watching when the system goes idle, the time when a CPU + is taken down and comes back online, and when entering from kernel + to user space and back to kernel space. During these transitions, + a callback may be executed and RCU synchronization will not protect + it. + + +Filtering which functions to trace +================================== + +If a callback is only to be called from specific functions, a filter must be +set up. The filters are added by name, or ip if it is known. + +.. code-block: c + + int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); + +@ops + The ops to set the filter with + +@buf + The string that holds the function filter text. +@len + The length of the string. + +@reset + Non-zero to reset all filters before applying this filter. + +Filters denote which functions should be enabled when tracing is enabled. +If @buf is NULL and reset is set, all functions will be enabled for tracing. + +The @buf can also be a glob expression to enable all functions that +match a specific pattern. + +See Filter Commands in :file:`Documentation/trace/ftrace.txt`. + +To just trace the schedule function:: + +.. code-block: c + + ret = ftrace_set_filter(&ops, "schedule", strlen("schedule"), 0); + +To add more functions, call the ftrace_set_filter() more than once with the +@reset parameter set to zero. To remove the current filter set and replace it +with new functions defined by @buf, have @reset be non-zero. + +To remove all the filtered functions and trace all functions:: + +.. code-block: c + + ret = ftrace_set_filter(&ops, NULL, 0, 1); + + +Sometimes more than one function has the same name. To trace just a specific +function in this case, ftrace_set_filter_ip() can be used. + +.. code-block: c + + ret = ftrace_set_filter_ip(&ops, ip, 0, 0); + +Although the ip must be the address where the call to fentry or mcount is +located in the function. This function is used by perf and kprobes that +gets the ip address from the user (usually using debug info from the kernel). + +If a glob is used to set the filter, functions can be added to a "notrace" +list that will prevent those functions from calling the callback. +The "notrace" list takes precedence over the "filter" list. If the +two lists are non-empty and contain the same functions, the callback will not +be called by any function. + +An empty "notrace" list means to allow all functions defined by the filter +to be traced. + +.. code-block: c + + int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); + +This takes the same parameters as ftrace_set_filter() but will add the +functions it finds to not be traced. This is a separate list from the +filter list, and this function does not modify the filter list. + +A non-zero @reset will clear the "notrace" list before adding functions +that match @buf to it. + +Clearing the "notrace" list is the same as clearing the filter list + +.. code-block: c + + ret = ftrace_set_notrace(&ops, NULL, 0, 1); + +The filter and notrace lists may be changed at any time. If only a set of +functions should call the callback, it is best to set the filters before +registering the callback. But the changes may also happen after the callback +has been registered. + +If a filter is in place, and the @reset is non-zero, and @buf contains a +matching glob to functions, the switch will happen during the time of +the ftrace_set_filter() call. At no time will all functions call the callback. + +.. code-block: c + + ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); + + register_ftrace_function(&ops); + + msleep(10); + + ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 1); + +is not the same as: + +.. code-block: c + + ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); + + register_ftrace_function(&ops); + + msleep(10); + + ftrace_set_filter(&ops, NULL, 0, 1); + + ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 0); + +As the latter will have a short time where all functions will call +the callback, between the time of the reset, and the time of the +new setting of the filter. diff --git a/Documentation/trace/intel_th.txt b/Documentation/trace/intel_th.txt index f92070e7dde0..7a57165c2492 100644 --- a/Documentation/trace/intel_th.txt +++ b/Documentation/trace/intel_th.txt @@ -37,7 +37,7 @@ description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth. STH registers an stm class device, through which it provides interface to userspace and kernelspace software trace sources. See -Documentation/tracing/stm.txt for more information on that. +Documentation/trace/stm.txt for more information on that. MSU can be configured to collect trace data into a system memory buffer, which can later on be read from its device nodes via read() or diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index fbc397d17e98..441a4b9b666f 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -773,7 +773,7 @@ host: # cat /dev/usb/lp0 More advanced testing can be done with the prn_example -described in Documentation/usb/gadget-printer.txt. +described in Documentation/usb/gadget_printer.txt. 20. UAC1 function (virtual ALSA card, using u_audio API) diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt index 7a9f635d0258..6d866c537127 100644 --- a/Documentation/watchdog/hpwdt.txt +++ b/Documentation/watchdog/hpwdt.txt @@ -15,7 +15,7 @@ Last reviewed: 05/20/2016 Watchdog functionality is enabled like any other common watchdog driver. That is, an application needs to be started that kicks off the watchdog timer. A - basic application exists in the Documentation/watchdog/src directory called + basic application exists in tools/testing/selftests/watchdog/ named watchdog-test.c. Simply compile the C file and kick it off. If the system gets into a bad state and hangs, the HPE ProLiant iLO timer register will not be updated in a timely fashion and a hardware system reset (also known as diff --git a/Documentation/watchdog/pcwd-watchdog.txt b/Documentation/watchdog/pcwd-watchdog.txt index 4f68052395c0..b8e60a441a43 100644 --- a/Documentation/watchdog/pcwd-watchdog.txt +++ b/Documentation/watchdog/pcwd-watchdog.txt @@ -25,7 +25,7 @@ Last reviewed: 10/05/2007 If you want to write a program to be compatible with the PC Watchdog driver, simply use of modify the watchdog test program: - Documentation/watchdog/src/watchdog-test.c + tools/testing/selftests/watchdog/watchdog-test.c Other IOCTL functions include: diff --git a/MAINTAINERS b/MAINTAINERS index 2811a211632c..fd2464ba3454 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4234,7 +4234,7 @@ S: Maintained F: drivers/dma/ F: include/linux/dmaengine.h F: Documentation/devicetree/bindings/dma/ -F: Documentation/dmaengine/ +F: Documentation/driver-api/dmaengine/ T: git git://git.infradead.org/users/vkoul/slave-dma.git DMA MAPPING HELPERS @@ -1459,7 +1459,8 @@ $(help-board-dirs): help-%: # Documentation targets # --------------------------------------------------------------------------- -DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs linkcheckdocs +DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ + linkcheckdocs dochelp refcheckdocs PHONY += $(DOC_TARGETS) $(DOC_TARGETS): scripts_basic FORCE $(Q)$(MAKE) $(build)=Documentation $@ diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h index d2013064dc69..dc9726fdac8f 100644 --- a/include/asm-generic/div64.h +++ b/include/asm-generic/div64.h @@ -26,6 +26,20 @@ #if BITS_PER_LONG == 64 +/** + * do_div - returns 2 values: calculate remainder and update new dividend + * @n: pointer to uint64_t dividend (will be updated) + * @base: uint32_t divisor + * + * Summary: + * ``uint32_t remainder = *n % base;`` + * ``*n = *n / base;`` + * + * Return: (uint32_t)remainder + * + * NOTE: macro parameter @n is evaluated multiple times, + * beware of side effects! + */ # define do_div(n,base) ({ \ uint32_t __base = (base); \ uint32_t __rem; \ diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index 19748a5b0e77..3489253e38fc 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -22,65 +22,74 @@ * See lib/bitmap.c for more details. */ -/* +/** + * DOC: bitmap overview + * * The available bitmap operations and their rough meaning in the * case that the bitmap is a single unsigned long are thus: * * Note that nbits should be always a compile time evaluable constant. * Otherwise many inlines will generate horrible code. * - * bitmap_zero(dst, nbits) *dst = 0UL - * bitmap_fill(dst, nbits) *dst = ~0UL - * bitmap_copy(dst, src, nbits) *dst = *src - * bitmap_and(dst, src1, src2, nbits) *dst = *src1 & *src2 - * bitmap_or(dst, src1, src2, nbits) *dst = *src1 | *src2 - * bitmap_xor(dst, src1, src2, nbits) *dst = *src1 ^ *src2 - * bitmap_andnot(dst, src1, src2, nbits) *dst = *src1 & ~(*src2) - * bitmap_complement(dst, src, nbits) *dst = ~(*src) - * bitmap_equal(src1, src2, nbits) Are *src1 and *src2 equal? - * bitmap_intersects(src1, src2, nbits) Do *src1 and *src2 overlap? - * bitmap_subset(src1, src2, nbits) Is *src1 a subset of *src2? - * bitmap_empty(src, nbits) Are all bits zero in *src? - * bitmap_full(src, nbits) Are all bits set in *src? - * bitmap_weight(src, nbits) Hamming Weight: number set bits - * bitmap_set(dst, pos, nbits) Set specified bit area - * bitmap_clear(dst, pos, nbits) Clear specified bit area - * bitmap_find_next_zero_area(buf, len, pos, n, mask) Find bit free area - * bitmap_find_next_zero_area_off(buf, len, pos, n, mask) as above - * bitmap_shift_right(dst, src, n, nbits) *dst = *src >> n - * bitmap_shift_left(dst, src, n, nbits) *dst = *src << n - * bitmap_remap(dst, src, old, new, nbits) *dst = map(old, new)(src) - * bitmap_bitremap(oldbit, old, new, nbits) newbit = map(old, new)(oldbit) - * bitmap_onto(dst, orig, relmap, nbits) *dst = orig relative to relmap - * bitmap_fold(dst, orig, sz, nbits) dst bits = orig bits mod sz - * bitmap_parse(buf, buflen, dst, nbits) Parse bitmap dst from kernel buf - * bitmap_parse_user(ubuf, ulen, dst, nbits) Parse bitmap dst from user buf - * bitmap_parselist(buf, dst, nbits) Parse bitmap dst from kernel buf - * bitmap_parselist_user(buf, dst, nbits) Parse bitmap dst from user buf - * bitmap_find_free_region(bitmap, bits, order) Find and allocate bit region - * bitmap_release_region(bitmap, pos, order) Free specified bit region - * bitmap_allocate_region(bitmap, pos, order) Allocate specified bit region - * bitmap_from_u32array(dst, nbits, buf, nwords) *dst = *buf (nwords 32b words) - * bitmap_to_u32array(buf, nwords, src, nbits) *buf = *dst (nwords 32b words) + * :: + * + * bitmap_zero(dst, nbits) *dst = 0UL + * bitmap_fill(dst, nbits) *dst = ~0UL + * bitmap_copy(dst, src, nbits) *dst = *src + * bitmap_and(dst, src1, src2, nbits) *dst = *src1 & *src2 + * bitmap_or(dst, src1, src2, nbits) *dst = *src1 | *src2 + * bitmap_xor(dst, src1, src2, nbits) *dst = *src1 ^ *src2 + * bitmap_andnot(dst, src1, src2, nbits) *dst = *src1 & ~(*src2) + * bitmap_complement(dst, src, nbits) *dst = ~(*src) + * bitmap_equal(src1, src2, nbits) Are *src1 and *src2 equal? + * bitmap_intersects(src1, src2, nbits) Do *src1 and *src2 overlap? + * bitmap_subset(src1, src2, nbits) Is *src1 a subset of *src2? + * bitmap_empty(src, nbits) Are all bits zero in *src? + * bitmap_full(src, nbits) Are all bits set in *src? + * bitmap_weight(src, nbits) Hamming Weight: number set bits + * bitmap_set(dst, pos, nbits) Set specified bit area + * bitmap_clear(dst, pos, nbits) Clear specified bit area + * bitmap_find_next_zero_area(buf, len, pos, n, mask) Find bit free area + * bitmap_find_next_zero_area_off(buf, len, pos, n, mask) as above + * bitmap_shift_right(dst, src, n, nbits) *dst = *src >> n + * bitmap_shift_left(dst, src, n, nbits) *dst = *src << n + * bitmap_remap(dst, src, old, new, nbits) *dst = map(old, new)(src) + * bitmap_bitremap(oldbit, old, new, nbits) newbit = map(old, new)(oldbit) + * bitmap_onto(dst, orig, relmap, nbits) *dst = orig relative to relmap + * bitmap_fold(dst, orig, sz, nbits) dst bits = orig bits mod sz + * bitmap_parse(buf, buflen, dst, nbits) Parse bitmap dst from kernel buf + * bitmap_parse_user(ubuf, ulen, dst, nbits) Parse bitmap dst from user buf + * bitmap_parselist(buf, dst, nbits) Parse bitmap dst from kernel buf + * bitmap_parselist_user(buf, dst, nbits) Parse bitmap dst from user buf + * bitmap_find_free_region(bitmap, bits, order) Find and allocate bit region + * bitmap_release_region(bitmap, pos, order) Free specified bit region + * bitmap_allocate_region(bitmap, pos, order) Allocate specified bit region + * bitmap_from_u32array(dst, nbits, buf, nwords) *dst = *buf (nwords 32b words) + * bitmap_to_u32array(buf, nwords, src, nbits) *buf = *dst (nwords 32b words) + * */ -/* - * Also the following operations in asm/bitops.h apply to bitmaps. +/** + * DOC: bitmap bitops + * + * Also the following operations in asm/bitops.h apply to bitmaps.:: + * + * set_bit(bit, addr) *addr |= bit + * clear_bit(bit, addr) *addr &= ~bit + * change_bit(bit, addr) *addr ^= bit + * test_bit(bit, addr) Is bit set in *addr? + * test_and_set_bit(bit, addr) Set bit and return old value + * test_and_clear_bit(bit, addr) Clear bit and return old value + * test_and_change_bit(bit, addr) Change bit and return old value + * find_first_zero_bit(addr, nbits) Position first zero bit in *addr + * find_first_bit(addr, nbits) Position first set bit in *addr + * find_next_zero_bit(addr, nbits, bit) Position next zero bit in *addr >= bit + * find_next_bit(addr, nbits, bit) Position next set bit in *addr >= bit * - * set_bit(bit, addr) *addr |= bit - * clear_bit(bit, addr) *addr &= ~bit - * change_bit(bit, addr) *addr ^= bit - * test_bit(bit, addr) Is bit set in *addr? - * test_and_set_bit(bit, addr) Set bit and return old value - * test_and_clear_bit(bit, addr) Clear bit and return old value - * test_and_change_bit(bit, addr) Change bit and return old value - * find_first_zero_bit(addr, nbits) Position first zero bit in *addr - * find_first_bit(addr, nbits) Position first set bit in *addr - * find_next_zero_bit(addr, nbits, bit) Position next zero bit in *addr >= bit - * find_next_bit(addr, nbits, bit) Position next set bit in *addr >= bit */ -/* +/** + * DOC: declare bitmap * The DECLARE_BITMAP(name,bits) macro, in linux/types.h, can be used * to declare an array named 'name' of just enough unsigned longs to * contain all bit positions from 0 to 'bits' - 1. @@ -361,8 +370,9 @@ static inline int bitmap_parse(const char *buf, unsigned int buflen, return __bitmap_parse(buf, buflen, 0, maskp, nmaskbits); } -/* +/** * BITMAP_FROM_U64() - Represent u64 value in the format suitable for bitmap. + * @n: u64 value * * Linux bitmaps are internally arrays of unsigned longs, i.e. 32-bit * integers in 32-bit environment, and 64-bit integers in 64-bit one. @@ -393,14 +403,14 @@ static inline int bitmap_parse(const char *buf, unsigned int buflen, ((unsigned long) ((u64)(n) >> 32)) #endif -/* +/** * bitmap_from_u64 - Check and swap words within u64. * @mask: source bitmap * @dst: destination bitmap * - * In 32-bit Big Endian kernel, when using (u32 *)(&val)[*] + * In 32-bit Big Endian kernel, when using ``(u32 *)(&val)[*]`` * to read u64 mask, we will get the wrong word. - * That is "(u32 *)(&val)[0]" gets the upper 32 bits, + * That is ``(u32 *)(&val)[0]`` gets the upper 32 bits, * but we expect the lower 32-bits of u64. */ static inline void bitmap_from_u64(unsigned long *dst, u64 mask) diff --git a/include/linux/log2.h b/include/linux/log2.h index c373295f359f..41a1ae010993 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -37,19 +37,23 @@ int __ilog2_u64(u64 n) } #endif -/* - * Determine whether some value is a power of two, where zero is +/** + * is_power_of_2() - check if a value is a power of two + * @n: the value to check + * + * Determine whether some value is a power of two, where zero is * *not* considered a power of two. + * Return: true if @n is a power of 2, otherwise false. */ - static inline __attribute__((const)) bool is_power_of_2(unsigned long n) { return (n != 0 && ((n & (n - 1)) == 0)); } -/* - * round up to nearest power of two +/** + * __roundup_pow_of_two() - round up to nearest power of two + * @n: value to round up */ static inline __attribute__((const)) unsigned long __roundup_pow_of_two(unsigned long n) @@ -57,8 +61,9 @@ unsigned long __roundup_pow_of_two(unsigned long n) return 1UL << fls_long(n - 1); } -/* - * round down to nearest power of two +/** + * __rounddown_pow_of_two() - round down to nearest power of two + * @n: value to round down */ static inline __attribute__((const)) unsigned long __rounddown_pow_of_two(unsigned long n) @@ -67,12 +72,12 @@ unsigned long __rounddown_pow_of_two(unsigned long n) } /** - * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value - * @n - parameter + * ilog2 - log base 2 of 32-bit or a 64-bit unsigned value + * @n: parameter * * constant-capable log of base 2 calculation * - this can be used to initialise global variables from constant data, hence - * the massive ternary operator construction + * the massive ternary operator construction * * selects the appropriately-sized optimised version depending on sizeof(n) */ @@ -150,7 +155,7 @@ unsigned long __rounddown_pow_of_two(unsigned long n) /** * roundup_pow_of_two - round the given value up to nearest power of two - * @n - parameter + * @n: parameter * * round the given value up to the nearest power of two * - the result is undefined when n == 0 @@ -167,7 +172,7 @@ unsigned long __rounddown_pow_of_two(unsigned long n) /** * rounddown_pow_of_two - round the given value down to nearest power of two - * @n - parameter + * @n: parameter * * round the given value down to the nearest power of two * - the result is undefined when n == 0 @@ -180,6 +185,12 @@ unsigned long __rounddown_pow_of_two(unsigned long n) __rounddown_pow_of_two(n) \ ) +static inline __attribute_const__ +int __order_base_2(unsigned long n) +{ + return n > 1 ? ilog2(n - 1) + 1 : 0; +} + /** * order_base_2 - calculate the (rounded up) base 2 order of the argument * @n: parameter @@ -193,13 +204,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n) * ob2(5) = 3 * ... and so on. */ - -static inline __attribute_const__ -int __order_base_2(unsigned long n) -{ - return n > 1 ? ilog2(n - 1) + 1 : 0; -} - #define order_base_2(n) \ ( \ __builtin_constant_p(n) ? ( \ diff --git a/include/linux/math64.h b/include/linux/math64.h index 082de345b73c..837f2f2d1d34 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -12,6 +12,11 @@ /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder + * @dividend: unsigned 64bit dividend + * @divisor: unsigned 32bit divisor + * @remainder: pointer to unsigned 32bit remainder + * + * Return: sets ``*remainder``, then returns dividend / divisor * * This is commonly provided by 32bit archs to provide an optimized 64bit * divide. @@ -24,6 +29,11 @@ static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) /** * div_s64_rem - signed 64bit divide with 32bit divisor with remainder + * @dividend: signed 64bit dividend + * @divisor: signed 32bit divisor + * @remainder: pointer to signed 32bit remainder + * + * Return: sets ``*remainder``, then returns dividend / divisor */ static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) { @@ -33,6 +43,11 @@ static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) /** * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder + * @dividend: unsigned 64bit dividend + * @divisor: unsigned 64bit divisor + * @remainder: pointer to unsigned 64bit remainder + * + * Return: sets ``*remainder``, then returns dividend / divisor */ static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) { @@ -42,6 +57,10 @@ static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) /** * div64_u64 - unsigned 64bit divide with 64bit divisor + * @dividend: unsigned 64bit dividend + * @divisor: unsigned 64bit divisor + * + * Return: dividend / divisor */ static inline u64 div64_u64(u64 dividend, u64 divisor) { @@ -50,6 +69,10 @@ static inline u64 div64_u64(u64 dividend, u64 divisor) /** * div64_s64 - signed 64bit divide with 64bit divisor + * @dividend: signed 64bit dividend + * @divisor: signed 64bit divisor + * + * Return: dividend / divisor */ static inline s64 div64_s64(s64 dividend, s64 divisor) { @@ -89,6 +112,8 @@ extern s64 div64_s64(s64 dividend, s64 divisor); /** * div_u64 - unsigned 64bit divide with 32bit divisor + * @dividend: unsigned 64bit dividend + * @divisor: unsigned 32bit divisor * * This is the most common 64bit divide and should be used if possible, * as many 32bit archs can optimize this variant better than a full 64bit @@ -104,6 +129,8 @@ static inline u64 div_u64(u64 dividend, u32 divisor) /** * div_s64 - signed 64bit divide with 32bit divisor + * @dividend: signed 64bit dividend + * @divisor: signed 32bit divisor */ #ifndef div_s64 static inline s64 div_s64(s64 dividend, s32 divisor) diff --git a/lib/bitmap.c b/lib/bitmap.c index c82c61b66e16..d8f0c094b18e 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -18,7 +18,9 @@ #include <asm/page.h> -/* +/** + * DOC: bitmap introduction + * * bitmaps provide an array of bits, implemented using an an * array of unsigned longs. The number of valid bits in a * given bitmap does _not_ need to be an exact multiple of diff --git a/lib/crc32.c b/lib/crc32.c index 6ddc92bc1460..2ef20fe84b69 100644 --- a/lib/crc32.c +++ b/lib/crc32.c @@ -225,7 +225,7 @@ static u32 __attribute_const__ gf2_multiply(u32 x, u32 y, u32 modulus) } /** - * crc32_generic_shift - Append len 0 bytes to crc, in logarithmic time + * crc32_generic_shift - Append @len 0 bytes to crc, in logarithmic time * @crc: The original little-endian CRC (i.e. lsbit is x^31 coefficient) * @len: The number of bytes. @crc is multiplied by x^(8*@len) * @polynomial: The modulus used to reduce the result to 32 bits. diff --git a/lib/crc4.c b/lib/crc4.c index cf6db46661be..164ed9444cd3 100644 --- a/lib/crc4.c +++ b/lib/crc4.c @@ -15,7 +15,7 @@ static const uint8_t crc4_tab[] = { /** * crc4 - calculate the 4-bit crc of a value. - * @crc: starting crc4 + * @c: starting crc4 * @x: value to checksum * @bits: number of bits in @x to checksum * diff --git a/lib/crc8.c b/lib/crc8.c index 87b59cafdb83..595a5a75e3cd 100644 --- a/lib/crc8.c +++ b/lib/crc8.c @@ -20,11 +20,11 @@ #include <linux/crc8.h> #include <linux/printk.h> -/* +/** * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. * - * table: table to be filled. - * polynomial: polynomial for which table is to be filled. + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. */ void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) { @@ -42,11 +42,11 @@ void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) } EXPORT_SYMBOL(crc8_populate_msb); -/* +/** * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. * - * table: table to be filled. - * polynomial: polynomial for which table is to be filled. + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. */ void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) { @@ -63,13 +63,13 @@ void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) } EXPORT_SYMBOL(crc8_populate_lsb); -/* +/** * crc8 - calculate a crc8 over the given input data. * - * table: crc table used for calculation. - * pdata: pointer to data buffer. - * nbytes: number of bytes in data buffer. - * crc: previous returned crc8 value. + * @table: crc table used for calculation. + * @pdata: pointer to data buffer. + * @nbytes: number of bytes in data buffer. + * @crc: previous returned crc8 value. */ u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc) { diff --git a/lib/div64.c b/lib/div64.c index 58e2a404097e..01c8602bb6ff 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -61,6 +61,12 @@ uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base) EXPORT_SYMBOL(__div64_32); #endif +/** + * div_s64_rem - signed 64bit divide with 64bit divisor and remainder + * @dividend: 64bit dividend + * @divisor: 64bit divisor + * @remainder: 64bit remainder + */ #ifndef div_s64_rem s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) { diff --git a/lib/gcd.c b/lib/gcd.c index 135ee6407a5e..227dea924425 100644 --- a/lib/gcd.c +++ b/lib/gcd.c @@ -13,6 +13,12 @@ #if !defined(CONFIG_CPU_NO_EFFICIENT_FFS) && !defined(CPU_NO_EFFICIENT_FFS) /* If __ffs is available, the even/odd algorithm benchmarks slower. */ + +/** + * gcd - calculate and return the greatest common divisor of 2 unsigned longs + * @a: first value + * @b: second value + */ unsigned long gcd(unsigned long a, unsigned long b) { unsigned long r = a | b; diff --git a/samples/connector/cn_test.c b/samples/connector/cn_test.c index d12cc944b696..95cd06f4ec1e 100644 --- a/samples/connector/cn_test.c +++ b/samples/connector/cn_test.c @@ -125,12 +125,12 @@ static int cn_test_want_notify(void) #endif static u32 cn_test_timer_counter; -static void cn_test_timer_func(unsigned long __data) +static void cn_test_timer_func(struct timer_list *unused) { struct cn_msg *m; char data[32]; - pr_debug("%s: timer fired with data %lu\n", __func__, __data); + pr_debug("%s: timer fired\n", __func__); m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC); if (m) { @@ -168,7 +168,7 @@ static int cn_test_init(void) goto err_out; } - setup_timer(&cn_test_timer, cn_test_timer_func, 0); + timer_setup(&cn_test_timer, cn_test_timer_func, 0); mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000)); pr_info("initialized with id={%u.%u}\n", diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check new file mode 100755 index 000000000000..bc1659900e89 --- /dev/null +++ b/scripts/documentation-file-ref-check @@ -0,0 +1,15 @@ +#!/bin/sh +# Treewide grep for references to files under Documentation, and report +# non-existing files in stderr. + +for f in $(git ls-files); do + for ref in $(grep -ho "Documentation/[A-Za-z0-9_.,~/*+-]*" "$f"); do + # presume trailing . and , are not part of the name + ref=${ref%%[.,]} + + # use ls to handle wildcards + if ! ls $ref >/dev/null 2>&1; then + echo "$f: $ref" >&2 + fi + done +done diff --git a/scripts/find-unused-docs.sh b/scripts/find-unused-docs.sh new file mode 100755 index 000000000000..3f46f8977dc4 --- /dev/null +++ b/scripts/find-unused-docs.sh @@ -0,0 +1,62 @@ +#!/bin/bash +# (c) 2017, Jonathan Corbet <corbet@lwn.net> +# sayli karnik <karniksayli1995@gmail.com> +# +# This script detects files with kernel-doc comments for exported functions +# that are not included in documentation. +# +# usage: Run 'scripts/find-unused-docs.sh directory' from top level of kernel +# tree. +# +# example: $scripts/find-unused-docs.sh drivers/scsi +# +# Licensed under the terms of the GNU GPL License + +if ! [ -d "Documentation" ]; then + echo "Run from top level of kernel tree" + exit 1 +fi + +if [ "$#" -ne 1 ]; then + echo "Usage: scripts/find-unused-docs.sh directory" + exit 1 +fi + +if ! [ -d "$1" ]; then + echo "Directory $1 doesn't exist" + exit 1 +fi + +cd "$( dirname "${BASH_SOURCE[0]}" )" +cd .. + +cd Documentation/ + +echo "The following files contain kerneldoc comments for exported functions \ +that are not used in the formatted documentation" + +# FILES INCLUDED + +files_included=($(grep -rHR ".. kernel-doc" --include \*.rst | cut -d " " -f 3)) + +declare -A FILES_INCLUDED + +for each in "${files_included[@]}"; do + FILES_INCLUDED[$each]="$each" + done + +cd .. + +# FILES NOT INCLUDED + +for file in `find $1 -name '*.c'`; do + + if [[ ${FILES_INCLUDED[$file]+_} ]]; then + continue; + fi + str=$(scripts/kernel-doc -text -export "$file" 2>/dev/null) + if [[ -n "$str" ]]; then + echo "$file" + fi + done + diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 9d3eafea58f0..67d051edd615 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2168,7 +2168,7 @@ sub dump_struct($$) { my $nested; if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { - #my $decl_type = $1; + my $decl_type = $1; $declaration_name = $2; my $members = $3; @@ -2194,7 +2194,7 @@ sub dump_struct($$) { $members =~ s/DECLARE_HASHTABLE\s*\(([^,)]+), ([^,)]+)\)/unsigned long $1\[1 << (($2) - 1)\]/gos; create_parameterlist($members, ';', $file); - check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested); + check_sections($file, $declaration_name, $decl_type, $sectcheck, $struct_actual, $nested); output_declaration($declaration_name, 'struct', @@ -2226,6 +2226,8 @@ sub dump_enum($$) { if ($x =~ /enum\s+(\w+)\s*{(.*)}/) { $declaration_name = $1; my $members = $2; + my %_members; + $members =~ s/\s+$//; foreach my $arg (split ',', $members) { @@ -2236,9 +2238,16 @@ sub dump_enum($$) { print STDERR "${file}:$.: warning: Enum value '$arg' ". "not described in enum '$declaration_name'\n"; } - + $_members{$arg} = 1; } + while (my ($k, $v) = each %parameterdescs) { + if (!exists($_members{$k})) { + print STDERR "${file}:$.: warning: Excess enum value " . + "'$k' description in '$declaration_name'\n"; + } + } + output_declaration($declaration_name, 'enum', {'enum' => $declaration_name, @@ -2506,7 +2515,7 @@ sub check_sections($$$$$$) { } else { if ($nested !~ m/\Q$sects[$sx]\E/) { print STDERR "${file}:$.: warning: " . - "Excess struct/union/enum/typedef member " . + "Excess $decl_type member " . "'$sects[$sx]' " . "description in '$decl_name'\n"; ++$warnings; |