summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt31
-rw-r--r--Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt54
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xilinx.txt22
-rw-r--r--drivers/spi/Kconfig96
-rw-r--r--drivers/spi/Makefile5
-rw-r--r--drivers/spi/spi-axi-spi-engine.c591
-rw-r--r--drivers/spi/spi-bcm2835.c5
-rw-r--r--drivers/spi/spi-bcm2835aux.c72
-rw-r--r--drivers/spi/spi-dw-mid.c4
-rw-r--r--drivers/spi/spi-dw-mmio.c5
-rw-r--r--drivers/spi/spi-imx.c341
-rw-r--r--drivers/spi/spi-lp8841-rtc.c256
-rw-r--r--drivers/spi/spi-pl022.c7
-rw-r--r--drivers/spi/spi-pxa2xx-dma.c8
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c13
-rw-r--r--drivers/spi/spi-pxa2xx.c151
-rw-r--r--drivers/spi/spi-pxa2xx.h37
-rw-r--r--drivers/spi/spi-rockchip.c56
-rw-r--r--drivers/spi/spi-ti-qspi.c139
-rw-r--r--drivers/spi/spi.c426
-rw-r--r--include/linux/pxa2xx_ssp.h1
-rw-r--r--include/linux/spi/spi.h145
23 files changed, 2080 insertions, 386 deletions
diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
new file mode 100644
index 000000000000..8a18d71e6879
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
@@ -0,0 +1,31 @@
+Analog Devices AXI SPI Engine controller Device Tree Bindings
+
+Required properties:
+- compatible : Must be "adi,axi-spi-engine-1.00.a""
+- reg : Physical base address and size of the register map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- clock-names : List of input clock names - "s_axi_aclk", "spi_clk"
+- clocks : Clock phandles and specifiers (See clock bindings for
+ details on clock-names and clocks).
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
+
+Optional subnodes:
+ Subnodes are use to represent the SPI slave devices connected to the SPI
+ master. They follow the generic SPI bindings as outlined in spi-bus.txt.
+
+Example:
+
+ spi@@44a00000 {
+ compatible = "adi,axi-spi-engine-1.00.a";
+ reg = <0x44a00000 0x1000>;
+ interrupts = <0 56 4>;
+ clocks = <&clkc 15 &clkc 15>;
+ clock-names = "s_axi_aclk", "spi_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* SPI devices */
+ };
diff --git a/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt b/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt
new file mode 100644
index 000000000000..852b651f3bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt
@@ -0,0 +1,54 @@
+* ICP DAS LP-8841 SPI Controller for RTC
+
+ICP DAS LP-8841 contains a DS-1302 RTC. RTC is connected to an IO
+memory register, which acts as an SPI master device.
+
+The device uses the standard MicroWire half-duplex transfer timing.
+Master output is set on low clock and sensed by the RTC on the rising
+edge. Master input is set by the RTC on the trailing edge and is sensed
+by the master on low clock.
+
+Required properties:
+
+- #address-cells: should be 1
+
+- #size-cells: should be 0
+
+- compatible: should be "icpdas,lp8841-spi-rtc"
+
+- reg: should provide IO memory address
+
+Requirements to SPI slave nodes:
+
+- There can be only one slave device.
+
+- The spi slave node should claim the following flags which are
+ required by the spi controller.
+
+ - spi-3wire: The master itself has only 3 wire. It cannor work in
+ full duplex mode.
+
+ - spi-cs-high: DS-1302 has active high chip select line. The master
+ doesn't support active low.
+
+ - spi-lsb-first: DS-1302 requires least significant bit first
+ transfers. The master only support this type of bit ordering.
+
+
+Example:
+
+spi@901c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "icpdas,lp8841-spi-rtc";
+ reg = <0x901c 0x1>;
+
+ rtc@0 {
+ compatible = "maxim,ds1302";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-cs-high;
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 0c491bda4c65..1b14d69d8903 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -9,6 +9,7 @@ Required Properties:
"rockchip,rk3066-spi" for rk3066.
"rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
"rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
+ "rockchip,rk3399-spi", "rockchip,rk3066-spi" for rk3399.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number to the cpu. The interrupt specifier format
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
new file mode 100644
index 000000000000..c7b7856bd528
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -0,0 +1,22 @@
+Xilinx SPI controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "xlnx,xps-spi-2.00.a" or "xlnx,xps-spi-2.00.b"
+- reg : Physical base address and size of SPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller
+
+Optional properties:
+- xlnx,num-ss-bits : Number of chip selects used.
+
+Example:
+ axi_quad_spi@41e00000 {
+ compatible = "xlnx,xps-spi-2.00.a";
+ interrupt-parent = <&intc>;
+ interrupts = <0 31 1>;
+ reg = <0x41e00000 0x10000>;
+ xlnx,num-ss-bits = <0x1>;
+ };
+
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 77064160dd76..9d8c84bb1544 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,11 +75,26 @@ config SPI_ATMEL
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
+config SPI_AU1550
+ tristate "Au1550/Au1200/Au1300 SPI Controller"
+ depends on MIPS_ALCHEMY
+ select SPI_BITBANG
+ help
+ If you say yes to this option, support will be included for the
+ PSC SPI controller found on Au1550, Au1200 and Au1300 series.
+
+config SPI_AXI_SPI_ENGINE
+ tristate "Analog Devices AXI SPI Engine controller"
+ depends on HAS_IOMEM
+ help
+ This enables support for the Analog Devices AXI SPI Engine SPI controller.
+ It is part of the SPI Engine framework that is used in some Analog Devices
+ reference designs for FPGAs.
+
config SPI_BCM2835
tristate "BCM2835 SPI controller"
depends on GPIOLIB
depends on ARCH_BCM2835 || COMPILE_TEST
- depends on GPIOLIB
help
This selects a driver for the Broadcom BCM2835 SPI master.
@@ -90,8 +105,7 @@ config SPI_BCM2835
config SPI_BCM2835AUX
tristate "BCM2835 SPI auxiliary controller"
- depends on ARCH_BCM2835 || COMPILE_TEST
- depends on GPIOLIB
+ depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST
help
This selects a driver for the Broadcom BCM2835 SPI aux master.
@@ -118,14 +132,6 @@ config SPI_BFIN_SPORT
help
Enable support for a SPI bus via the Blackfin SPORT peripheral.
-config SPI_AU1550
- tristate "Au1550/Au1200/Au1300 SPI Controller"
- depends on MIPS_ALCHEMY
- select SPI_BITBANG
- help
- If you say yes to this option, support will be included for the
- PSC SPI controller found on Au1550, Au1200 and Au1300 series.
-
config SPI_BCM53XX
tristate "Broadcom BCM53xx SPI controller"
depends on ARCH_BCM_5301X
@@ -197,6 +203,23 @@ config SPI_DAVINCI
help
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
+config SPI_DESIGNWARE
+ tristate "DesignWare SPI controller core support"
+ help
+ general driver for SPI controller core from DesignWare
+
+config SPI_DW_PCI
+ tristate "PCI interface driver for DW SPI core"
+ depends on SPI_DESIGNWARE && PCI
+
+config SPI_DW_MID_DMA
+ bool "DMA support for DW SPI controller on Intel MID platform"
+ depends on SPI_DW_PCI && DW_DMAC_PCI
+
+config SPI_DW_MMIO
+ tristate "Memory-mapped io interface driver for DW SPI core"
+ depends on SPI_DESIGNWARE
+
config SPI_DLN2
tristate "Diolan DLN-2 USB SPI adapter"
depends on MFD_DLN2
@@ -271,6 +294,16 @@ config SPI_LM70_LLP
which interfaces to an LM70 temperature sensor using
a parallel port.
+config SPI_LP8841_RTC
+ tristate "ICP DAS LP-8841 SPI Controller for RTC"
+ depends on MACH_PXA27X_DT || COMPILE_TEST
+ help
+ This driver provides an SPI master device to drive Maxim
+ DS-1302 real time clock.
+
+ Say N here unless you plan to run the kernel on an ICP DAS
+ LP-8x4x industrial computer.
+
config SPI_MPC52xx
tristate "Freescale MPC52xx SPI (non-PSC) controller support"
depends on PPC_MPC52xx
@@ -346,6 +379,13 @@ config SPI_MT65XX
say Y or M here.If you are not sure, say N.
SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
+config SPI_NUC900
+ tristate "Nuvoton NUC900 series SPI"
+ depends on ARCH_W90X900
+ select SPI_BITBANG
+ help
+ SPI driver for Nuvoton NUC900 series ARM SoCs
+
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
depends on GPIOLIB || COMPILE_TEST
@@ -415,10 +455,6 @@ config SPI_PPC4xx
help
This selects a driver for the PPC4xx SPI Controller.
-config SPI_PXA2XX_DMA
- def_bool y
- depends on SPI_PXA2XX
-
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on (ARCH_PXA || PCI || ACPI)
@@ -451,7 +487,7 @@ config SPI_RB4XX
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
help
SPI driver for Renesas RSPI and QSPI blocks.
@@ -501,7 +537,7 @@ config SPI_SC18IS602
config SPI_SH_MSIOF
tristate "SuperH MSIOF SPI controller"
depends on HAVE_CLK && HAS_DMA
- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
@@ -520,7 +556,7 @@ config SPI_SH_SCI
config SPI_SH_HSPI
tristate "SuperH HSPI controller"
- depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH HSPI blocks.
@@ -647,34 +683,10 @@ config SPI_ZYNQMP_GQSPI
help
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
-config SPI_NUC900
- tristate "Nuvoton NUC900 series SPI"
- depends on ARCH_W90X900
- select SPI_BITBANG
- help
- SPI driver for Nuvoton NUC900 series ARM SoCs
-
#
# Add new SPI master controllers in alphabetical order above this line
#
-config SPI_DESIGNWARE
- tristate "DesignWare SPI controller core support"
- help
- general driver for SPI controller core from DesignWare
-
-config SPI_DW_PCI
- tristate "PCI interface driver for DW SPI core"
- depends on SPI_DESIGNWARE && PCI
-
-config SPI_DW_MID_DMA
- bool "DMA support for DW SPI controller on Intel MID platform"
- depends on SPI_DW_PCI && DW_DMAC_PCI
-
-config SPI_DW_MMIO
- tristate "Memory-mapped io interface driver for DW SPI core"
- depends on SPI_DESIGNWARE
-
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8991ffce6e12..fbb255c5a608 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
+obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
obj-$(CONFIG_SPI_IMX) += spi-imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
+obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
@@ -62,8 +64,7 @@ obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o
obj-$(CONFIG_SPI_ORION) += spi-orion.o
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
-spi-pxa2xx-platform-objs := spi-pxa2xx.o
-spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
new file mode 100644
index 000000000000..c968ab210a51
--- /dev/null
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -0,0 +1,591 @@
+/*
+ * SPI-Engine SPI controller driver
+ * Copyright 2015 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#define SPI_ENGINE_VERSION_MAJOR(x) ((x >> 16) & 0xff)
+#define SPI_ENGINE_VERSION_MINOR(x) ((x >> 8) & 0xff)
+#define SPI_ENGINE_VERSION_PATCH(x) (x & 0xff)
+
+#define SPI_ENGINE_REG_VERSION 0x00
+
+#define SPI_ENGINE_REG_RESET 0x40
+
+#define SPI_ENGINE_REG_INT_ENABLE 0x80
+#define SPI_ENGINE_REG_INT_PENDING 0x84
+#define SPI_ENGINE_REG_INT_SOURCE 0x88
+
+#define SPI_ENGINE_REG_SYNC_ID 0xc0
+
+#define SPI_ENGINE_REG_CMD_FIFO_ROOM 0xd0
+#define SPI_ENGINE_REG_SDO_FIFO_ROOM 0xd4
+#define SPI_ENGINE_REG_SDI_FIFO_LEVEL 0xd8
+
+#define SPI_ENGINE_REG_CMD_FIFO 0xe0
+#define SPI_ENGINE_REG_SDO_DATA_FIFO 0xe4
+#define SPI_ENGINE_REG_SDI_DATA_FIFO 0xe8
+#define SPI_ENGINE_REG_SDI_DATA_FIFO_PEEK 0xec
+
+#define SPI_ENGINE_INT_CMD_ALMOST_EMPTY BIT(0)
+#define SPI_ENGINE_INT_SDO_ALMOST_EMPTY BIT(1)
+#define SPI_ENGINE_INT_SDI_ALMOST_FULL BIT(2)
+#define SPI_ENGINE_INT_SYNC BIT(3)
+
+#define SPI_ENGINE_CONFIG_CPHA BIT(0)
+#define SPI_ENGINE_CONFIG_CPOL BIT(1)
+#define SPI_ENGINE_CONFIG_3WIRE BIT(2)
+
+#define SPI_ENGINE_INST_TRANSFER 0x0
+#define SPI_ENGINE_INST_ASSERT 0x1
+#define SPI_ENGINE_INST_WRITE 0x2
+#define SPI_ENGINE_INST_MISC 0x3
+
+#define SPI_ENGINE_CMD_REG_CLK_DIV 0x0
+#define SPI_ENGINE_CMD_REG_CONFIG 0x1
+
+#define SPI_ENGINE_MISC_SYNC 0x0
+#define SPI_ENGINE_MISC_SLEEP 0x1
+
+#define SPI_ENGINE_TRANSFER_WRITE 0x1
+#define SPI_ENGINE_TRANSFER_READ 0x2
+
+#define SPI_ENGINE_CMD(inst, arg1, arg2) \
+ (((inst) << 12) | ((arg1) << 8) | (arg2))
+
+#define SPI_ENGINE_CMD_TRANSFER(flags, n) \
+ SPI_ENGINE_CMD(SPI_ENGINE_INST_TRANSFER, (flags), (n))
+#define SPI_ENGINE_CMD_ASSERT(delay, cs) \
+ SPI_ENGINE_CMD(SPI_ENGINE_INST_ASSERT, (delay), (cs))
+#define SPI_ENGINE_CMD_WRITE(reg, val) \
+ SPI_ENGINE_CMD(SPI_ENGINE_INST_WRITE, (reg), (val))
+#define SPI_ENGINE_CMD_SLEEP(delay) \
+ SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, SPI_ENGINE_MISC_SLEEP, (delay))
+#define SPI_ENGINE_CMD_SYNC(id) \
+ SPI_ENGINE_CMD(SPI_ENGINE_INST_MISC, SPI_ENGINE_MISC_SYNC, (id))
+
+struct spi_engine_program {
+ unsigned int length;
+ uint16_t instructions[];
+};
+
+struct spi_engine {
+ struct clk *clk;
+ struct clk *ref_clk;
+
+ spinlock_t lock;
+
+ void __iomem *base;
+
+ struct spi_message *msg;
+ struct spi_engine_program *p;
+ unsigned cmd_length;
+ const uint16_t *cmd_buf;
+
+ struct spi_transfer *tx_xfer;
+ unsigned int tx_length;
+ const uint8_t *tx_buf;
+
+ struct spi_transfer *rx_xfer;
+ unsigned int rx_length;
+ uint8_t *rx_buf;
+
+ unsigned int sync_id;
+ unsigned int completed_id;
+
+ unsigned int int_enable;
+};
+
+static void spi_engine_program_add_cmd(struct spi_engine_program *p,
+ bool dry, uint16_t cmd)
+{
+ if (!dry)
+ p->instructions[p->length] = cmd;
+ p->length++;
+}
+
+static unsigned int spi_engine_get_config(struct spi_device *spi)
+{
+ unsigned int config = 0;
+
+ if (spi->mode & SPI_CPOL)
+ config |= SPI_ENGINE_CONFIG_CPOL;
+ if (spi->mode & SPI_CPHA)
+ config |= SPI_ENGINE_CONFIG_CPHA;
+ if (spi->mode & SPI_3WIRE)
+ config |= SPI_ENGINE_CONFIG_3WIRE;
+
+ return config;
+}
+
+static unsigned int spi_engine_get_clk_div(struct spi_engine *spi_engine,
+ struct spi_device *spi, struct spi_transfer *xfer)
+{
+ unsigned int clk_div;
+
+ clk_div = DIV_ROUND_UP(clk_get_rate(spi_engine->ref_clk),
+ xfer->speed_hz * 2);
+ if (clk_div > 255)
+ clk_div = 255;
+ else if (clk_div > 0)
+ clk_div -= 1;
+
+ return clk_div;
+}
+
+static void spi_engine_gen_xfer(struct spi_engine_program *p, bool dry,
+ struct spi_transfer *xfer)
+{
+ unsigned int len = xfer->len;
+
+ while (len) {
+ unsigned int n = min(len, 256U);
+ unsigned int flags = 0;
+
+ if (xfer->tx_buf)
+ flags |= SPI_ENGINE_TRANSFER_WRITE;
+ if (xfer->rx_buf)
+ flags |= SPI_ENGINE_TRANSFER_READ;
+
+ spi_engine_program_add_cmd(p, dry,
+ SPI_ENGINE_CMD_TRANSFER(flags, n - 1));
+ len -= n;
+ }
+}
+
+static void spi_engine_gen_sleep(struct spi_engine_program *p, bool dry,
+ struct spi_engine *spi_engine, unsigned int clk_div, unsigned int delay)
+{
+ unsigned int spi_clk = clk_get_rate(spi_engine->ref_clk);
+ unsigned int t;
+
+ if (delay == 0)
+ return;
+
+ t = DIV_ROUND_UP(delay * spi_clk, (clk_div + 1) * 2);
+ while (t) {
+ unsigned int n = min(t, 256U);
+
+ spi_engine_program_add_cmd(p, dry, SPI_ENGINE_CMD_SLEEP(n - 1));
+ t -= n;
+ }
+}
+
+static void spi_engine_gen_cs(struct spi_engine_program *p, bool dry,
+ struct spi_device *spi, bool assert)
+{
+ unsigned int mask = 0xff;
+
+ if (assert)
+ mask ^= BIT(spi->chip_select);
+
+ spi_engine_program_add_cmd(p, dry, SPI_ENGINE_CMD_ASSERT(1, mask));
+}
+
+static int spi_engine_compile_message(struct spi_engine *spi_engine,
+ struct spi_message *msg, bool dry, struct spi_engine_program *p)
+{
+ struct spi_device *spi = msg->spi;
+ struct spi_transfer *xfer;
+ int clk_div, new_clk_div;
+ bool cs_change = true;
+
+ clk_div = -1;
+
+ spi_engine_program_add_cmd(p, dry,
+ SPI_ENGINE_CMD_WRITE(SPI_ENGINE_CMD_REG_CONFIG,
+ spi_engine_get_config(spi)));
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ new_clk_div = spi_engine_get_clk_div(spi_engine, spi, xfer);
+ if (new_clk_div != clk_div) {
+ clk_div = new_clk_div;
+ spi_engine_program_add_cmd(p, dry,
+ SPI_ENGINE_CMD_WRITE(SPI_ENGINE_CMD_REG_CLK_DIV,
+ clk_div));
+ }
+
+ if (cs_change)
+ spi_engine_gen_cs(p, dry, spi, true);
+
+ spi_engine_gen_xfer(p, dry, xfer);
+ spi_engine_gen_sleep(p, dry, spi_engine, clk_div,
+ xfer->delay_usecs);
+
+ cs_change = xfer->cs_change;
+ if (list_is_last(&xfer->transfer_list, &msg->transfers))
+ cs_change = !cs_change;
+
+ if (cs_change)
+ spi_engine_gen_cs(p, dry, spi, false);
+ }
+
+ return 0;
+}
+
+static void spi_engine_xfer_next(struct spi_engine *spi_engine,
+ struct spi_transfer **_xfer)
+{
+ struct spi_message *msg = spi_engine->msg;
+ struct spi_transfer *xfer = *_xfer;
+
+ if (!xfer) {
+ xfer = list_first_entry(&msg->transfers,
+ struct spi_transfer, transfer_list);
+ } else if (list_is_last(&xfer->transfer_list, &msg->transfers)) {
+ xfer = NULL;
+ } else {
+ xfer = list_next_entry(xfer, transfer_list);
+ }
+
+ *_xfer = xfer;
+}
+
+static void spi_engine_tx_next(struct spi_engine *spi_engine)
+{
+ struct spi_transfer *xfer = spi_engine->tx_xfer;
+
+ do {
+ spi_engine_xfer_next(spi_engine, &xfer);
+ } while (xfer && !xfer->tx_buf);
+
+ spi_engine->tx_xfer = xfer;
+ if (xfer) {
+ spi_engine->tx_length = xfer->len;
+ spi_engine->tx_buf = xfer->tx_buf;
+ } else {
+ spi_engine->tx_buf = NULL;
+ }
+}
+
+static void spi_engine_rx_next(struct spi_engine *spi_engine)
+{
+ struct spi_transfer *xfer = spi_engine->rx_xfer;
+
+ do {
+ spi_engine_xfer_next(spi_engine, &xfer);
+ } while (xfer && !xfer->rx_buf);
+
+ spi_engine->rx_xfer = xfer;
+ if (xfer) {
+ spi_engine->rx_length = xfer->len;
+ spi_engine->rx_buf = xfer->rx_buf;
+ } else {
+ spi_engine->rx_buf = NULL;
+ }
+}
+
+static bool spi_engine_write_cmd_fifo(struct spi_engine *spi_engine)
+{
+ void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_CMD_FIFO;
+ unsigned int n, m, i;
+ const uint16_t *buf;
+
+ n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_CMD_FIFO_ROOM);
+ while (n && spi_engine->cmd_length) {
+ m = min(n, spi_engine->cmd_length);
+ buf = spi_engine->cmd_buf;
+ for (i = 0; i < m; i++)
+ writel_relaxed(buf[i], addr);
+ spi_engine->cmd_buf += m;
+ spi_engine->cmd_length -= m;
+ n -= m;
+ }
+
+ return spi_engine->cmd_length != 0;
+}
+
+static bool spi_engine_write_tx_fifo(struct spi_engine *spi_engine)
+{
+ void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDO_DATA_FIFO;
+ unsigned int n, m, i;
+ const uint8_t *buf;
+
+ n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_SDO_FIFO_ROOM);
+ while (n && spi_engine->tx_length) {
+ m = min(n, spi_engine->tx_length);
+ buf = spi_engine->tx_buf;
+ for (i = 0; i < m; i++)
+ writel_relaxed(buf[i], addr);
+ spi_engine->tx_buf += m;
+ spi_engine->tx_length -= m;
+ n -= m;
+ if (spi_engine->tx_length == 0)
+ spi_engine_tx_next(spi_engine);
+ }
+
+ return spi_engine->tx_length != 0;
+}
+
+static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
+{
+ void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDI_DATA_FIFO;
+ unsigned int n, m, i;
+ uint8_t *buf;
+
+ n = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_SDI_FIFO_LEVEL);
+ while (n && spi_engine->rx_length) {
+ m = min(n, spi_engine->rx_length);
+ buf = spi_engine->rx_buf;
+ for (i = 0; i < m; i++)
+ buf[i] = readl_relaxed(addr);
+ spi_engine->rx_buf += m;
+ spi_engine->rx_length -= m;
+ n -= m;
+ if (spi_engine->rx_length == 0)
+ spi_engine_rx_next(spi_engine);
+ }
+
+ return spi_engine->rx_length != 0;
+}
+
+static irqreturn_t spi_engine_irq(int irq, void *devid)
+{
+ struct spi_master *master = devid;
+ struct spi_engine *spi_engine = spi_master_get_devdata(master);
+ unsigned int disable_int = 0;
+ unsigned int pending;
+
+ pending = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
+
+ if (pending & SPI_ENGINE_INT_SYNC) {
+ writel_relaxed(SPI_ENGINE_INT_SYNC,
+ spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
+ spi_engine->completed_id = readl_relaxed(
+ spi_engine->base + SPI_ENGINE_REG_SYNC_ID);
+ }
+
+ spin_lock(&spi_engine->lock);
+
+ if (pending & SPI_ENGINE_INT_CMD_ALMOST_EMPTY) {
+ if (!spi_engine_write_cmd_fifo(spi_engine))
+ disable_int |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
+ }
+
+ if (pending & SPI_ENGINE_INT_SDO_ALMOST_EMPTY) {
+ if (!spi_engine_write_tx_fifo(spi_engine))
+ disable_int |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
+ }
+
+ if (pending & (SPI_ENGINE_INT_SDI_ALMOST_FULL | SPI_ENGINE_INT_SYNC)) {
+ if (!spi_engine_read_rx_fifo(spi_engine))
+ disable_int |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
+ }
+
+ if (pending & SPI_ENGINE_INT_SYNC) {
+ if (spi_engine->msg &&
+ spi_engine->completed_id == spi_engine->sync_id) {
+ struct spi_message *msg = spi_engine->msg;
+
+ kfree(spi_engine->p);
+ msg->status = 0;
+ msg->actual_length = msg->frame_length;
+ spi_engine->msg = NULL;
+ spi_finalize_current_message(master);
+ disable_int |= SPI_ENGINE_INT_SYNC;
+ }
+ }
+
+ if (disable_int) {
+ spi_engine->int_enable &= ~disable_int;
+ writel_relaxed(spi_engine->int_enable,
+ spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+ }
+
+ spin_unlock(&spi_engine->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int spi_engine_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_engine_program p_dry, *p;
+ struct spi_engine *spi_engine = spi_master_get_devdata(master);
+ unsigned int int_enable = 0;
+ unsigned long flags;
+ size_t size;
+
+ p_dry.length = 0;
+ spi_engine_compile_message(spi_engine, msg, true, &p_dry);
+
+ size = sizeof(*p->instructions) * (p_dry.length + 1);
+ p = kzalloc(sizeof(*p) + size, GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+ spi_engine_compile_message(spi_engine, msg, false, p);
+
+ spin_lock_irqsave(&spi_engine->lock, flags);
+ spi_engine->sync_id = (spi_engine->sync_id + 1) & 0xff;
+ spi_engine_program_add_cmd(p, false,
+ SPI_ENGINE_CMD_SYNC(spi_engine->sync_id));
+
+ spi_engine->msg = msg;
+ spi_engine->p = p;
+
+ spi_engine->cmd_buf = p->instructions;
+ spi_engine->cmd_length = p->length;
+ if (spi_engine_write_cmd_fifo(spi_engine))
+ int_enable |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
+
+ spi_engine_tx_next(spi_engine);
+ if (spi_engine_write_tx_fifo(spi_engine))
+ int_enable |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
+
+ spi_engine_rx_next(spi_engine);
+ if (spi_engine->rx_length != 0)
+ int_enable |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
+
+ int_enable |= SPI_ENGINE_INT_SYNC;
+
+ writel_relaxed(int_enable,
+ spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+ spi_engine->int_enable = int_enable;
+ spin_unlock_irqrestore(&spi_engine->lock, flags);
+
+ return 0;
+}
+
+static int spi_engine_probe(struct platform_device *pdev)
+{
+ struct spi_engine *spi_engine;
+ struct spi_master *master;
+ unsigned int version;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return -ENXIO;
+
+ spi_engine = devm_kzalloc(&pdev->dev, sizeof(*spi_engine), GFP_KERNEL);
+ if (!spi_engine)
+ return -ENOMEM;
+
+ master = spi_alloc_master(&pdev->dev, 0);
+ if (!master)
+ return -ENOMEM;
+
+ spi_master_set_devdata(master, spi_engine);
+
+ spin_lock_init(&spi_engine->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ spi_engine->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spi_engine->base)) {
+ ret = PTR_ERR(spi_engine->base);
+ goto err_put_master;
+ }
+
+ version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
+ if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
+ dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
+ SPI_ENGINE_VERSION_MAJOR(version),
+ SPI_ENGINE_VERSION_MINOR(version),
+ SPI_ENGINE_VERSION_PATCH(version));
+ return -ENODEV;
+ }
+
+ spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+ if (IS_ERR(spi_engine->clk)) {
+ ret = PTR_ERR(spi_engine->clk);
+ goto err_put_master;
+ }
+
+ spi_engine->ref_clk = devm_clk_get(&pdev->dev, "spi_clk");
+ if (IS_ERR(spi_engine->ref_clk)) {
+ ret = PTR_ERR(spi_engine->ref_clk);
+ goto err_put_master;
+ }
+
+ ret = clk_prepare_enable(spi_engine->clk);
+ if (ret)
+ goto err_put_master;
+
+ ret = clk_prepare_enable(spi_engine->ref_clk);
+ if (ret)
+ goto err_clk_disable;
+
+ writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
+ writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
+ writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+
+ ret = request_irq(irq, spi_engine_irq, 0, pdev->name, master);
+ if (ret)
+ goto err_ref_clk_disable;
+
+ master->dev.parent = &pdev->dev;
+ master->dev.of_node = pdev->dev.of_node;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
+ master->transfer_one_message = spi_engine_transfer_one_message;
+ master->num_chipselect = 8;
+
+ ret = spi_register_master(master);
+ if (ret)
+ goto err_free_irq;
+
+ platform_set_drvdata(pdev, master);
+
+ return 0;
+err_free_irq:
+ free_irq(irq, master);
+err_ref_clk_disable:
+ clk_disable_unprepare(spi_engine->ref_clk);
+err_clk_disable:
+ clk_disable_unprepare(spi_engine->clk);
+err_put_master:
+ spi_master_put(master);
+ return ret;
+}
+
+static int spi_engine_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_engine *spi_engine = spi_master_get_devdata(master);
+ int irq = platform_get_irq(pdev, 0);
+
+ spi_unregister_master(master);
+
+ free_irq(irq, master);
+
+ writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
+ writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
+ writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);
+
+ clk_disable_unprepare(spi_engine->ref_clk);
+ clk_disable_unprepare(spi_engine->clk);
+
+ return 0;
+}
+
+static const struct of_device_id spi_engine_match_table[] = {
+ { .compatible = "adi,axi-spi-engine-1.00.a" },
+ { },
+};
+
+static struct platform_driver spi_engine_driver = {
+ .probe = spi_engine_probe,
+ .remove = spi_engine_remove,
+ .driver = {
+ .name = "spi-engine",
+ .of_match_table = spi_engine_match_table,
+ },
+};
+module_platform_driver(spi_engine_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices SPI engine peripheral driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index cf04960cc3e6..f35cc10772f6 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -727,11 +727,6 @@ static int bcm2835_spi_setup(struct spi_device *spi)
spi->chip_select, spi->cs_gpio, err);
return err;
}
- /* the implementation of pinctrl-bcm2835 currently does not
- * set the GPIO value when using gpio_direction_output
- * so we are setting it here explicitly
- */
- gpio_set_value(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
return 0;
}
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index ecc73c0a97cf..7428091d3f5b 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -64,9 +64,9 @@
#define BCM2835_AUX_SPI_CNTL0_VAR_WIDTH 0x00004000
#define BCM2835_AUX_SPI_CNTL0_DOUTHOLD 0x00003000
#define BCM2835_AUX_SPI_CNTL0_ENABLE 0x00000800
-#define BCM2835_AUX_SPI_CNTL0_CPHA_IN 0x00000400
+#define BCM2835_AUX_SPI_CNTL0_IN_RISING 0x00000400
#define BCM2835_AUX_SPI_CNTL0_CLEARFIFO 0x00000200
-#define BCM2835_AUX_SPI_CNTL0_CPHA_OUT 0x00000100
+#define BCM2835_AUX_SPI_CNTL0_OUT_RISING 0x00000100
#define BCM2835_AUX_SPI_CNTL0_CPOL 0x00000080
#define BCM2835_AUX_SPI_CNTL0_MSBF_OUT 0x00000040
#define BCM2835_AUX_SPI_CNTL0_SHIFTLEN 0x0000003F
@@ -92,9 +92,6 @@
#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30
#define BCM2835_AUX_SPI_POLLING_JIFFIES 2
-#define BCM2835_AUX_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
- | SPI_NO_CS)
-
struct bcm2835aux_spi {
void __iomem *regs;
struct clk *clk;
@@ -212,9 +209,15 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
ret = IRQ_HANDLED;
}
- /* and if rx_len is 0 then wake up completion and disable spi */
+ if (!bs->tx_len) {
+ /* disable tx fifo empty interrupt */
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
+ BCM2835_AUX_SPI_CNTL1_IDLE);
+ }
+
+ /* and if rx_len is 0 then disable interrupts and wake up completion */
if (!bs->rx_len) {
- bcm2835aux_spi_reset_hw(bs);
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
complete(&master->xfer_completion);
}
@@ -307,9 +310,6 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
}
}
- /* Transfer complete - reset SPI HW */
- bcm2835aux_spi_reset_hw(bs);
-
/* and return without waiting for completion */
return 0;
}
@@ -330,10 +330,6 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
* resulting (potentially) in more interrupts when transferring
* more than 12 bytes
*/
- bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
- BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
- BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
- bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
/* set clock */
spi_hz = tfr->speed_hz;
@@ -348,17 +344,13 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
} else { /* the slowest we can go */
speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
}
+ /* mask out old speed from previous spi_transfer */
+ bs->cntl[0] &= ~(BCM2835_AUX_SPI_CNTL0_SPEED);
+ /* set the new speed */
bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT;
spi_used_hz = clk_hz / (2 * (speed + 1));
- /* handle all the modes */
- if (spi->mode & SPI_CPOL)
- bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
- if (spi->mode & SPI_CPHA)
- bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPHA_OUT |
- BCM2835_AUX_SPI_CNTL0_CPHA_IN;
-
/* set transmit buffers and length */
bs->tx_buf = tfr->tx_buf;
bs->rx_buf = tfr->rx_buf;
@@ -382,6 +374,40 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
}
+static int bcm2835aux_spi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_device *spi = msg->spi;
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
+ BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
+ BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
+ bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
+
+ /* handle all the modes */
+ if (spi->mode & SPI_CPOL) {
+ bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
+ bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_OUT_RISING;
+ } else {
+ bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_IN_RISING;
+ }
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
+
+ return 0;
+}
+
+static int bcm2835aux_spi_unprepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ bcm2835aux_spi_reset_hw(bs);
+
+ return 0;
+}
+
static void bcm2835aux_spi_handle_err(struct spi_master *master,
struct spi_message *msg)
{
@@ -405,11 +431,13 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, master);
- master->mode_bits = BCM2835_AUX_SPI_MODE_BITS;
+ master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->num_chipselect = -1;
master->transfer_one = bcm2835aux_spi_transfer_one;
master->handle_err = bcm2835aux_spi_handle_err;
+ master->prepare_message = bcm2835aux_spi_prepare_message;
+ master->unprepare_message = bcm2835aux_spi_unprepare_message;
master->dev.of_node = pdev->dev.of_node;
bs = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 9185f6c08459..e31971f91475 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -89,10 +89,10 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
if (!dws->dma_inited)
return;
- dmaengine_terminate_all(dws->txchan);
+ dmaengine_terminate_sync(dws->txchan);
dma_release_channel(dws->txchan);
- dmaengine_terminate_all(dws->rxchan);
+ dmaengine_terminate_sync(dws->rxchan);
dma_release_channel(dws->rxchan);
}
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index a6d7029a85ac..447497e9124c 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -47,11 +47,6 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
/* Get basic io resource and map it */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -EINVAL;
- }
-
dws->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dws->regs)) {
dev_err(&pdev->dev, "SPI region map failed\n");
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index c688efa95e29..e7a19be87c38 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,7 +56,6 @@
/* The maximum bytes that a sdma BD can transfer.*/
#define MAX_SDMA_BD_BYTES (1 << 15)
-#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000))
struct spi_imx_config {
unsigned int speed_hz;
unsigned int bpw;
@@ -86,12 +85,18 @@ struct spi_imx_devtype_data {
struct spi_imx_data {
struct spi_bitbang bitbang;
+ struct device *dev;
struct completion xfer_done;
void __iomem *base;
+ unsigned long base_phys;
+
struct clk *clk_per;
struct clk *clk_ipg;
unsigned long spi_clk;
+ unsigned int spi_bus_clk;
+
+ unsigned int bytes_per_word;
unsigned int count;
void (*tx)(struct spi_imx_data *);
@@ -101,8 +106,6 @@ struct spi_imx_data {
unsigned int txfifo; /* number of words pushed in tx FIFO */
/* DMA */
- unsigned int dma_is_inited;
- unsigned int dma_finished;
bool usedma;
u32 wml;
struct completion dma_rx_completion;
@@ -199,15 +202,35 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
return 7;
}
+static int spi_imx_bytes_per_word(const int bpw)
+{
+ return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
+}
+
static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *transfer)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+ unsigned int bpw = transfer->bits_per_word;
+
+ if (!master->dma_rx)
+ return false;
- if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
- (transfer->len % spi_imx->wml) == 0)
- return true;
- return false;
+ if (!bpw)
+ bpw = spi->bits_per_word;
+
+ bpw = spi_imx_bytes_per_word(bpw);
+
+ if (bpw != 1 && bpw != 2 && bpw != 4)
+ return false;
+
+ if (transfer->len < spi_imx->wml * bpw)
+ return false;
+
+ if (transfer->len % (spi_imx->wml * bpw))
+ return false;
+
+ return true;
}
#define MX51_ECSPI_CTRL 0x08
@@ -232,16 +255,13 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_INT_RREN (1 << 3)
#define MX51_ECSPI_DMA 0x14
-#define MX51_ECSPI_DMA_TX_WML_OFFSET 0
-#define MX51_ECSPI_DMA_TX_WML_MASK 0x3F
-#define MX51_ECSPI_DMA_RX_WML_OFFSET 16
-#define MX51_ECSPI_DMA_RX_WML_MASK (0x3F << 16)
-#define MX51_ECSPI_DMA_RXT_WML_OFFSET 24
-#define MX51_ECSPI_DMA_RXT_WML_MASK (0x3F << 24)
+#define MX51_ECSPI_DMA_TX_WML(wml) ((wml) & 0x3f)
+#define MX51_ECSPI_DMA_RX_WML(wml) (((wml) & 0x3f) << 16)
+#define MX51_ECSPI_DMA_RXT_WML(wml) (((wml) & 0x3f) << 24)
-#define MX51_ECSPI_DMA_TEDEN_OFFSET 7
-#define MX51_ECSPI_DMA_RXDEN_OFFSET 23
-#define MX51_ECSPI_DMA_RXTDEN_OFFSET 31
+#define MX51_ECSPI_DMA_TEDEN (1 << 7)
+#define MX51_ECSPI_DMA_RXDEN (1 << 23)
+#define MX51_ECSPI_DMA_RXTDEN (1 << 31)
#define MX51_ECSPI_STAT 0x18
#define MX51_ECSPI_STAT_RR (1 << 3)
@@ -250,14 +270,15 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_TESTREG_LBC BIT(31)
/* MX51 eCSPI */
-static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
- unsigned int *fres)
+static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
+ unsigned int fspi, unsigned int *fres)
{
/*
* there are two 4-bit dividers, the pre-divider divides by
* $pre, the post-divider by 2^$post
*/
unsigned int pre, post;
+ unsigned int fin = spi_imx->spi_clk;
if (unlikely(fspi > fin))
return 0;
@@ -270,14 +291,14 @@ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
post = max(4U, post) - 4;
if (unlikely(post > 0xf)) {
- pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
- __func__, fspi, fin);
+ dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
+ fspi, fin);
return 0xff;
}
pre = DIV_ROUND_UP(fin, fspi << post) - 1;
- pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+ dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
__func__, fin, fspi, post, pre);
/* Resulting frequency for the SCLK line. */
@@ -302,22 +323,17 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int
static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
{
- u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+ u32 reg;
- if (!spi_imx->usedma)
- reg |= MX51_ECSPI_CTRL_XCH;
- else if (!spi_imx->dma_finished)
- reg |= MX51_ECSPI_CTRL_SMC;
- else
- reg &= ~MX51_ECSPI_CTRL_SMC;
+ reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+ reg |= MX51_ECSPI_CTRL_XCH;
writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
}
static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
struct spi_imx_config *config)
{
- u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0;
- u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg;
+ u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
u32 clk = config->speed_hz, delay, reg;
/*
@@ -330,7 +346,8 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
/* set clock speed */
- ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz, &clk);
+ ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
+ spi_imx->spi_bus_clk = clk;
/* set chip select to use */
ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -341,20 +358,16 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
if (config->mode & SPI_CPHA)
cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
- else
- cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
if (config->mode & SPI_CPOL) {
cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
- } else {
- cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
- cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
}
if (config->mode & SPI_CS_HIGH)
cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
- else
- cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+
+ if (spi_imx->usedma)
+ ctrl |= MX51_ECSPI_CTRL_SMC;
/* CTRL register always go first to bring out controller from reset */
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
@@ -389,22 +402,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
* Configure the DMA register: setup the watermark
* and enable DMA request.
*/
- if (spi_imx->dma_is_inited) {
- dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-
- rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
- tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
- rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
- dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
- & ~MX51_ECSPI_DMA_RX_WML_MASK
- & ~MX51_ECSPI_DMA_RXT_WML_MASK)
- | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg
- |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET)
- |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET)
- |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET);
-
- writel(dma, spi_imx->base + MX51_ECSPI_DMA);
- }
+
+ writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
+ MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
return 0;
}
@@ -784,11 +787,63 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int spi_imx_dma_configure(struct spi_master *master,
+ int bytes_per_word)
+{
+ int ret;
+ enum dma_slave_buswidth buswidth;
+ struct dma_slave_config rx = {}, tx = {};
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+ if (bytes_per_word == spi_imx->bytes_per_word)
+ /* Same as last time */
+ return 0;
+
+ switch (bytes_per_word) {
+ case 4:
+ buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ case 2:
+ buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ case 1:
+ buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ tx.direction = DMA_MEM_TO_DEV;
+ tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
+ tx.dst_addr_width = buswidth;
+ tx.dst_maxburst = spi_imx->wml;
+ ret = dmaengine_slave_config(master->dma_tx, &tx);
+ if (ret) {
+ dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
+ return ret;
+ }
+
+ rx.direction = DMA_DEV_TO_MEM;
+ rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
+ rx.src_addr_width = buswidth;
+ rx.src_maxburst = spi_imx->wml;
+ ret = dmaengine_slave_config(master->dma_rx, &rx);
+ if (ret) {
+ dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
+ return ret;
+ }
+
+ spi_imx->bytes_per_word = bytes_per_word;
+
+ return 0;
+}
+
static int spi_imx_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
struct spi_imx_config config;
+ int ret;
config.bpw = t ? t->bits_per_word : spi->bits_per_word;
config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
@@ -812,6 +867,18 @@ static int spi_imx_setupxfer(struct spi_device *spi,
spi_imx->tx = spi_imx_buf_tx_u32;
}
+ if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
+ spi_imx->usedma = 1;
+ else
+ spi_imx->usedma = 0;
+
+ if (spi_imx->usedma) {
+ ret = spi_imx_dma_configure(spi->master,
+ spi_imx_bytes_per_word(config.bpw));
+ if (ret)
+ return ret;
+ }
+
spi_imx->devtype_data->config(spi_imx, &config);
return 0;
@@ -830,15 +897,11 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
dma_release_channel(master->dma_tx);
master->dma_tx = NULL;
}
-
- spi_imx->dma_is_inited = 0;
}
static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
- struct spi_master *master,
- const struct resource *res)
+ struct spi_master *master)
{
- struct dma_slave_config slave_config = {};
int ret;
/* use pio mode for i.mx6dl chip TKT238285 */
@@ -856,16 +919,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
goto err;
}
- slave_config.direction = DMA_MEM_TO_DEV;
- slave_config.dst_addr = res->start + MXC_CSPITXDATA;
- slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.dst_maxburst = spi_imx->wml;
- ret = dmaengine_slave_config(master->dma_tx, &slave_config);
- if (ret) {
- dev_err(dev, "error in TX dma configuration.\n");
- goto err;
- }
-
/* Prepare for RX : */
master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
if (IS_ERR(master->dma_rx)) {
@@ -875,15 +928,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
goto err;
}
- slave_config.direction = DMA_DEV_TO_MEM;
- slave_config.src_addr = res->start + MXC_CSPIRXDATA;
- slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.src_maxburst = spi_imx->wml;
- ret = dmaengine_slave_config(master->dma_rx, &slave_config);
- if (ret) {
- dev_err(dev, "error in RX dma configuration.\n");
- goto err;
- }
+ spi_imx_dma_configure(master, 1);
init_completion(&spi_imx->dma_rx_completion);
init_completion(&spi_imx->dma_tx_completion);
@@ -891,7 +936,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
master->max_dma_len = MAX_SDMA_BD_BYTES;
spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
SPI_MASTER_MUST_TX;
- spi_imx->dma_is_inited = 1;
return 0;
err:
@@ -913,95 +957,81 @@ static void spi_imx_dma_tx_callback(void *cookie)
complete(&spi_imx->dma_tx_completion);
}
+static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
+{
+ unsigned long timeout = 0;
+
+ /* Time with actual data transfer and CS change delay related to HW */
+ timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
+
+ /* Add extra second for scheduler related activities */
+ timeout += 1;
+
+ /* Double calculated timeout */
+ return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
+}
+
static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
struct spi_transfer *transfer)
{
- struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
- int ret;
+ struct dma_async_tx_descriptor *desc_tx, *desc_rx;
+ unsigned long transfer_timeout;
unsigned long timeout;
struct spi_master *master = spi_imx->bitbang.master;
struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
- if (tx) {
- desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
- tx->sgl, tx->nents, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_tx)
- goto tx_nodma;
-
- desc_tx->callback = spi_imx_dma_tx_callback;
- desc_tx->callback_param = (void *)spi_imx;
- dmaengine_submit(desc_tx);
- }
+ /*
+ * The TX DMA setup starts the transfer, so make sure RX is configured
+ * before TX.
+ */
+ desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
+ rx->sgl, rx->nents, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx)
+ return -EINVAL;
- if (rx) {
- desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
- rx->sgl, rx->nents, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_rx)
- goto rx_nodma;
+ desc_rx->callback = spi_imx_dma_rx_callback;
+ desc_rx->callback_param = (void *)spi_imx;
+ dmaengine_submit(desc_rx);
+ reinit_completion(&spi_imx->dma_rx_completion);
+ dma_async_issue_pending(master->dma_rx);
- desc_rx->callback = spi_imx_dma_rx_callback;
- desc_rx->callback_param = (void *)spi_imx;
- dmaengine_submit(desc_rx);
+ desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
+ tx->sgl, tx->nents, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ dmaengine_terminate_all(master->dma_tx);
+ return -EINVAL;
}
- reinit_completion(&spi_imx->dma_rx_completion);
+ desc_tx->callback = spi_imx_dma_tx_callback;
+ desc_tx->callback_param = (void *)spi_imx;
+ dmaengine_submit(desc_tx);
reinit_completion(&spi_imx->dma_tx_completion);
-
- /* Trigger the cspi module. */
- spi_imx->dma_finished = 0;
-
- /*
- * Set these order to avoid potential RX overflow. The overflow may
- * happen if we enable SPI HW before starting RX DMA due to rescheduling
- * for another task and/or interrupt.
- * So RX DMA enabled first to make sure data would be read out from FIFO
- * ASAP. TX DMA enabled next to start filling TX FIFO with new data.
- * And finaly SPI HW enabled to start actual data transfer.
- */
- dma_async_issue_pending(master->dma_rx);
dma_async_issue_pending(master->dma_tx);
- spi_imx->devtype_data->trigger(spi_imx);
+
+ transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
/* Wait SDMA to finish the data transfer.*/
timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
- IMX_DMA_TIMEOUT);
+ transfer_timeout);
if (!timeout) {
- pr_warn("%s %s: I/O Error in DMA TX\n",
- dev_driver_string(&master->dev),
- dev_name(&master->dev));
+ dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
dmaengine_terminate_all(master->dma_tx);
dmaengine_terminate_all(master->dma_rx);
- } else {
- timeout = wait_for_completion_timeout(
- &spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
- if (!timeout) {
- pr_warn("%s %s: I/O Error in DMA RX\n",
- dev_driver_string(&master->dev),
- dev_name(&master->dev));
- spi_imx->devtype_data->reset(spi_imx);
- dmaengine_terminate_all(master->dma_rx);
- }
+ return -ETIMEDOUT;
}
- spi_imx->dma_finished = 1;
- spi_imx->devtype_data->trigger(spi_imx);
-
- if (!timeout)
- ret = -ETIMEDOUT;
- else
- ret = transfer->len;
-
- return ret;
+ timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
+ transfer_timeout);
+ if (!timeout) {
+ dev_err(&master->dev, "I/O Error in DMA RX\n");
+ spi_imx->devtype_data->reset(spi_imx);
+ dmaengine_terminate_all(master->dma_rx);
+ return -ETIMEDOUT;
+ }
-rx_nodma:
- dmaengine_terminate_all(master->dma_tx);
-tx_nodma:
- pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
- dev_driver_string(&master->dev),
- dev_name(&master->dev));
- return -EAGAIN;
+ return transfer->len;
}
static int spi_imx_pio_transfer(struct spi_device *spi,
@@ -1028,19 +1058,12 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
static int spi_imx_transfer(struct spi_device *spi,
struct spi_transfer *transfer)
{
- int ret;
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
- if (spi_imx->bitbang.master->can_dma &&
- spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
- spi_imx->usedma = true;
- ret = spi_imx_dma_transfer(spi_imx, transfer);
- if (ret != -EAGAIN)
- return ret;
- }
- spi_imx->usedma = false;
-
- return spi_imx_pio_transfer(spi, transfer);
+ if (spi_imx->usedma)
+ return spi_imx_dma_transfer(spi_imx, transfer);
+ else
+ return spi_imx_pio_transfer(spi, transfer);
}
static int spi_imx_setup(struct spi_device *spi)
@@ -1130,6 +1153,7 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx = spi_master_get_devdata(master);
spi_imx->bitbang.master = master;
+ spi_imx->dev = &pdev->dev;
spi_imx->devtype_data = of_id ? of_id->data :
(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
@@ -1170,6 +1194,7 @@ static int spi_imx_probe(struct platform_device *pdev)
ret = PTR_ERR(spi_imx->base);
goto out_master_put;
}
+ spi_imx->base_phys = res->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -1210,7 +1235,7 @@ static int spi_imx_probe(struct platform_device *pdev)
* other chips.
*/
if (is_imx51_ecspi(spi_imx)) {
- ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+ ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
if (ret == -EPROBE_DEFER)
goto out_clk_put;
diff --git a/drivers/spi/spi-lp8841-rtc.c b/drivers/spi/spi-lp8841-rtc.c
new file mode 100644
index 000000000000..faa577d282c0
--- /dev/null
+++ b/drivers/spi/spi-lp8841-rtc.c
@@ -0,0 +1,256 @@
+/*
+ * SPI master driver for ICP DAS LP-8841 RTC
+ *
+ * Copyright (C) 2016 Sergei Ianovich
+ *
+ * based on
+ *
+ * Dallas DS1302 RTC Support
+ * Copyright (C) 2002 David McCullough
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "spi_lp8841_rtc"
+
+#define SPI_LP8841_RTC_CE 0x01
+#define SPI_LP8841_RTC_CLK 0x02
+#define SPI_LP8841_RTC_nWE 0x04
+#define SPI_LP8841_RTC_MOSI 0x08
+#define SPI_LP8841_RTC_MISO 0x01
+
+/*
+ * REVISIT If there is support for SPI_3WIRE and SPI_LSB_FIRST in SPI
+ * GPIO driver, this SPI driver can be replaced by a simple GPIO driver
+ * providing 3 GPIO pins.
+ */
+
+struct spi_lp8841_rtc {
+ void *iomem;
+ unsigned long state;
+};
+
+static inline void
+setsck(struct spi_lp8841_rtc *data, int is_on)
+{
+ if (is_on)
+ data->state |= SPI_LP8841_RTC_CLK;
+ else
+ data->state &= ~SPI_LP8841_RTC_CLK;
+ writeb(data->state, data->iomem);
+}
+
+static inline void
+setmosi(struct spi_lp8841_rtc *data, int is_on)
+{
+ if (is_on)
+ data->state |= SPI_LP8841_RTC_MOSI;
+ else
+ data->state &= ~SPI_LP8841_RTC_MOSI;
+ writeb(data->state, data->iomem);
+}
+
+static inline int
+getmiso(struct spi_lp8841_rtc *data)
+{
+ return ioread8(data->iomem) & SPI_LP8841_RTC_MISO;
+}
+
+static inline u32
+bitbang_txrx_be_cpha0_lsb(struct spi_lp8841_rtc *data,
+ unsigned usecs, unsigned cpol, unsigned flags,
+ u32 word, u8 bits)
+{
+ /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
+
+ u32 shift = 32 - bits;
+ /* clock starts at inactive polarity */
+ for (; likely(bits); bits--) {
+
+ /* setup LSB (to slave) on leading edge */
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(data, (word & 1));
+
+ usleep_range(usecs, usecs + 1); /* T(setup) */
+
+ /* sample LSB (from slave) on trailing edge */
+ word >>= 1;
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= (getmiso(data) << 31);
+
+ setsck(data, !cpol);
+ usleep_range(usecs, usecs + 1);
+
+ setsck(data, cpol);
+ }
+
+ word >>= shift;
+ return word;
+}
+
+static int
+spi_lp8841_rtc_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct spi_lp8841_rtc *data = spi_master_get_devdata(master);
+ unsigned count = t->len;
+ const u8 *tx = t->tx_buf;
+ u8 *rx = t->rx_buf;
+ u8 word = 0;
+ int ret = 0;
+
+ if (tx) {
+ data->state &= ~SPI_LP8841_RTC_nWE;
+ writeb(data->state, data->iomem);
+ while (likely(count > 0)) {
+ word = *tx++;
+ bitbang_txrx_be_cpha0_lsb(data, 1, 0,
+ SPI_MASTER_NO_RX, word, 8);
+ count--;
+ }
+ } else if (rx) {
+ data->state |= SPI_LP8841_RTC_nWE;
+ writeb(data->state, data->iomem);
+ while (likely(count > 0)) {
+ word = bitbang_txrx_be_cpha0_lsb(data, 1, 0,
+ SPI_MASTER_NO_TX, word, 8);
+ *rx++ = word;
+ count--;
+ }
+ } else {
+ ret = -EINVAL;
+ }
+
+ spi_finalize_current_transfer(master);
+
+ return ret;
+}
+
+static void
+spi_lp8841_rtc_set_cs(struct spi_device *spi, bool enable)
+{
+ struct spi_lp8841_rtc *data = spi_master_get_devdata(spi->master);
+
+ data->state = 0;
+ writeb(data->state, data->iomem);
+ if (enable) {
+ usleep_range(4, 5);
+ data->state |= SPI_LP8841_RTC_CE;
+ writeb(data->state, data->iomem);
+ usleep_range(4, 5);
+ }
+}
+
+static int
+spi_lp8841_rtc_setup(struct spi_device *spi)
+{
+ if ((spi->mode & SPI_CS_HIGH) == 0) {
+ dev_err(&spi->dev, "unsupported active low chip select\n");
+ return -EINVAL;
+ }
+
+ if ((spi->mode & SPI_LSB_FIRST) == 0) {
+ dev_err(&spi->dev, "unsupported MSB first mode\n");
+ return -EINVAL;
+ }
+
+ if ((spi->mode & SPI_3WIRE) == 0) {
+ dev_err(&spi->dev, "unsupported wiring. 3 wires required\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id spi_lp8841_rtc_dt_ids[] = {
+ { .compatible = "icpdas,lp8841-spi-rtc" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, spi_lp8841_rtc_dt_ids);
+#endif
+
+static int
+spi_lp8841_rtc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct spi_master *master;
+ struct spi_lp8841_rtc *data;
+ void *iomem;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*data));
+ if (!master)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, master);
+
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->mode_bits = SPI_CS_HIGH | SPI_3WIRE | SPI_LSB_FIRST;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = 1;
+ master->setup = spi_lp8841_rtc_setup;
+ master->set_cs = spi_lp8841_rtc_set_cs;
+ master->transfer_one = spi_lp8841_rtc_transfer_one;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+#ifdef CONFIG_OF
+ master->dev.of_node = pdev->dev.of_node;
+#endif
+
+ data = spi_master_get_devdata(master);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->iomem = devm_ioremap_resource(&pdev->dev, iomem);
+ ret = PTR_ERR_OR_ZERO(data->iomem);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get IO address\n");
+ goto err_put_master;
+ }
+
+ /* register with the SPI framework */
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register spi master\n");
+ goto err_put_master;
+ }
+
+ return ret;
+
+
+err_put_master:
+ spi_master_put(master);
+
+ return ret;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver spi_lp8841_rtc_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(spi_lp8841_rtc_dt_ids),
+ },
+ .probe = spi_lp8841_rtc_probe,
+};
+module_platform_driver(spi_lp8841_rtc_driver);
+
+MODULE_DESCRIPTION("SPI master driver for ICP DAS LP-8841 RTC");
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 5e5fd77e2711..f7f7ba17b40e 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -346,13 +346,6 @@ struct vendor_data {
* @clk: outgoing clock "SPICLK" for the SPI bus
* @master: SPI framework hookup
* @master_info: controller-specific data from machine setup
- * @kworker: thread struct for message pump
- * @kworker_task: pointer to task for message pump kworker thread
- * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
- * @queue: message queue
- * @busy: message pump is busy
- * @running: message pump is running
* @pump_transfers: Tasklet used in Interrupt Transfer mode
* @cur_msg: Pointer to current spi_message being processed
* @cur_transfer: Pointer to current spi_transfer
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index bd8b369a343c..365fc22c3572 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -254,8 +254,8 @@ irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
if (status & SSSR_ROR) {
dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
- dmaengine_terminate_all(drv_data->rx_chan);
- dmaengine_terminate_all(drv_data->tx_chan);
+ dmaengine_terminate_async(drv_data->rx_chan);
+ dmaengine_terminate_async(drv_data->tx_chan);
pxa2xx_spi_dma_transfer_complete(drv_data, true);
return IRQ_HANDLED;
@@ -331,13 +331,13 @@ int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
void pxa2xx_spi_dma_release(struct driver_data *drv_data)
{
if (drv_data->rx_chan) {
- dmaengine_terminate_all(drv_data->rx_chan);
+ dmaengine_terminate_sync(drv_data->rx_chan);
dma_release_channel(drv_data->rx_chan);
sg_free_table(&drv_data->rx_sgt);
drv_data->rx_chan = NULL;
}
if (drv_data->tx_chan) {
- dmaengine_terminate_all(drv_data->tx_chan);
+ dmaengine_terminate_sync(drv_data->tx_chan);
dma_release_channel(drv_data->tx_chan);
sg_free_table(&drv_data->tx_sgt);
drv_data->tx_chan = NULL;
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index d19d7f28aecb..520ed1dd5780 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -19,6 +19,7 @@ enum {
PORT_BSW1,
PORT_BSW2,
PORT_QUARK_X1000,
+ PORT_LPT,
};
struct pxa_spi_info {
@@ -42,6 +43,9 @@ static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 };
static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 };
static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 };
+static struct dw_dma_slave lpt_tx_param = { .dst_id = 0 };
+static struct dw_dma_slave lpt_rx_param = { .src_id = 1 };
+
static bool lpss_dma_filter(struct dma_chan *chan, void *param)
{
struct dw_dma_slave *dws = param;
@@ -98,6 +102,14 @@ static struct pxa_spi_info spi_info_configs[] = {
.num_chipselect = 1,
.max_clk_rate = 50000000,
},
+ [PORT_LPT] = {
+ .type = LPSS_LPT_SSP,
+ .port_id = 0,
+ .num_chipselect = 1,
+ .max_clk_rate = 50000000,
+ .tx_param = &lpt_tx_param,
+ .rx_param = &lpt_rx_param,
+ },
};
static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
@@ -202,6 +214,7 @@ static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
{ PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 },
{ PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 },
{ PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 },
+ { PCI_VDEVICE(INTEL, 0x9ce6), PORT_LPT },
{ },
};
MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index ab9914ad8365..85e59a406a4c 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -65,8 +65,6 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
#define LPSS_CS_CONTROL_SW_MODE BIT(0)
#define LPSS_CS_CONTROL_CS_HIGH BIT(1)
-#define LPSS_CS_CONTROL_CS_SEL_SHIFT 8
-#define LPSS_CS_CONTROL_CS_SEL_MASK (3 << LPSS_CS_CONTROL_CS_SEL_SHIFT)
#define LPSS_CAPS_CS_EN_SHIFT 9
#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT)
@@ -82,6 +80,10 @@ struct lpss_config {
u32 rx_threshold;
u32 tx_threshold_lo;
u32 tx_threshold_hi;
+ /* Chip select control */
+ unsigned cs_sel_shift;
+ unsigned cs_sel_mask;
+ unsigned cs_num;
};
/* Keep these sorted with enum pxa_ssp_type */
@@ -106,6 +108,19 @@ static const struct lpss_config lpss_platforms[] = {
.tx_threshold_lo = 160,
.tx_threshold_hi = 224,
},
+ { /* LPSS_BSW_SSP */
+ .offset = 0x400,
+ .reg_general = 0x08,
+ .reg_ssp = 0x0c,
+ .reg_cs_ctrl = 0x18,
+ .reg_capabilities = -1,
+ .rx_threshold = 64,
+ .tx_threshold_lo = 160,
+ .tx_threshold_hi = 224,
+ .cs_sel_shift = 2,
+ .cs_sel_mask = 1 << 2,
+ .cs_num = 2,
+ },
{ /* LPSS_SPT_SSP */
.offset = 0x200,
.reg_general = -1,
@@ -125,6 +140,8 @@ static const struct lpss_config lpss_platforms[] = {
.rx_threshold = 1,
.tx_threshold_lo = 16,
.tx_threshold_hi = 48,
+ .cs_sel_shift = 8,
+ .cs_sel_mask = 3 << 8,
},
};
@@ -139,6 +156,7 @@ static bool is_lpss_ssp(const struct driver_data *drv_data)
switch (drv_data->ssp_type) {
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
+ case LPSS_BSW_SSP:
case LPSS_SPT_SSP:
case LPSS_BXT_SSP:
return true;
@@ -288,37 +306,50 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
}
}
+static void lpss_ssp_select_cs(struct driver_data *drv_data,
+ const struct lpss_config *config)
+{
+ u32 value, cs;
+
+ if (!config->cs_sel_mask)
+ return;
+
+ value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
+
+ cs = drv_data->cur_msg->spi->chip_select;
+ cs <<= config->cs_sel_shift;
+ if (cs != (value & config->cs_sel_mask)) {
+ /*
+ * When switching another chip select output active the
+ * output must be selected first and wait 2 ssp_clk cycles
+ * before changing state to active. Otherwise a short
+ * glitch will occur on the previous chip select since
+ * output select is latched but state control is not.
+ */
+ value &= ~config->cs_sel_mask;
+ value |= cs;
+ __lpss_ssp_write_priv(drv_data,
+ config->reg_cs_ctrl, value);
+ ndelay(1000000000 /
+ (drv_data->master->max_speed_hz / 2));
+ }
+}
+
static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
{
const struct lpss_config *config;
- u32 value, cs;
+ u32 value;
config = lpss_get_config(drv_data);
+ if (enable)
+ lpss_ssp_select_cs(drv_data, config);
+
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
- if (enable) {
- cs = drv_data->cur_msg->spi->chip_select;
- cs <<= LPSS_CS_CONTROL_CS_SEL_SHIFT;
- if (cs != (value & LPSS_CS_CONTROL_CS_SEL_MASK)) {
- /*
- * When switching another chip select output active
- * the output must be selected first and wait 2 ssp_clk
- * cycles before changing state to active. Otherwise
- * a short glitch will occur on the previous chip
- * select since output select is latched but state
- * control is not.
- */
- value &= ~LPSS_CS_CONTROL_CS_SEL_MASK;
- value |= cs;
- __lpss_ssp_write_priv(drv_data,
- config->reg_cs_ctrl, value);
- ndelay(1000000000 /
- (drv_data->master->max_speed_hz / 2));
- }
+ if (enable)
value &= ~LPSS_CS_CONTROL_CS_HIGH;
- } else {
+ else
value |= LPSS_CS_CONTROL_CS_HIGH;
- }
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
}
@@ -496,6 +527,7 @@ static void giveback(struct driver_data *drv_data)
{
struct spi_transfer* last_transfer;
struct spi_message *msg;
+ unsigned long timeout;
msg = drv_data->cur_msg;
drv_data->cur_msg = NULL;
@@ -508,6 +540,12 @@ static void giveback(struct driver_data *drv_data)
if (last_transfer->delay_usecs)
udelay(last_transfer->delay_usecs);
+ /* Wait until SSP becomes idle before deasserting the CS */
+ timeout = jiffies + msecs_to_jiffies(10);
+ while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY &&
+ !time_after(jiffies, timeout))
+ cpu_relax();
+
/* Drop chip select UNLESS cs_change is true or we are returning
* a message with an error, or next message is for another chip
*/
@@ -572,7 +610,7 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg)
static void int_transfer_complete(struct driver_data *drv_data)
{
- /* Stop SSP */
+ /* Clear and disable interrupts */
write_SSSR_CS(drv_data, drv_data->clear_sr);
reset_sccr1(drv_data);
if (!pxa25x_ssp_comp(drv_data))
@@ -957,8 +995,6 @@ static void pump_transfers(unsigned long data)
drv_data->tx_end = drv_data->tx + transfer->len;
drv_data->rx = transfer->rx_buf;
drv_data->rx_end = drv_data->rx + transfer->len;
- drv_data->rx_dma = transfer->rx_dma;
- drv_data->tx_dma = transfer->tx_dma;
drv_data->len = transfer->len;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
@@ -1001,19 +1037,6 @@ static void pump_transfers(unsigned long data)
"pump_transfers: DMA burst size reduced to match bits_per_word\n");
}
- /* NOTE: PXA25x_SSP _could_ use external clocking ... */
- cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
- if (!pxa25x_ssp_comp(drv_data))
- dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
- drv_data->master->max_speed_hz
- / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
- chip->enable_dma ? "DMA" : "PIO");
- else
- dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
- drv_data->master->max_speed_hz / 2
- / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
- chip->enable_dma ? "DMA" : "PIO");
-
message->state = RUNNING_STATE;
drv_data->dma_mapped = 0;
@@ -1040,6 +1063,19 @@ static void pump_transfers(unsigned long data)
write_SSSR_CS(drv_data, drv_data->clear_sr);
}
+ /* NOTE: PXA25x_SSP _could_ use external clocking ... */
+ cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
+ if (!pxa25x_ssp_comp(drv_data))
+ dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
+ drv_data->master->max_speed_hz
+ / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
+ drv_data->dma_mapped ? "DMA" : "PIO");
+ else
+ dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
+ drv_data->master->max_speed_hz / 2
+ / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
+ drv_data->dma_mapped ? "DMA" : "PIO");
+
if (is_lpss_ssp(drv_data)) {
if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff)
!= chip->lpss_rx_threshold)
@@ -1166,6 +1202,7 @@ static int setup(struct spi_device *spi)
break;
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
+ case LPSS_BSW_SSP:
case LPSS_SPT_SSP:
case LPSS_BXT_SSP:
config = lpss_get_config(drv_data);
@@ -1313,7 +1350,7 @@ static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT3430", LPSS_LPT_SSP },
{ "INT3431", LPSS_LPT_SSP },
{ "80860F0E", LPSS_BYT_SSP },
- { "8086228E", LPSS_BYT_SSP },
+ { "8086228E", LPSS_BSW_SSP },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
@@ -1347,10 +1384,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
/* SPT-H */
{ PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP },
{ PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP },
- /* BXT */
+ /* BXT A-Step */
{ PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP },
+ /* BXT B-Step */
+ { PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
/* APL */
{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
@@ -1438,6 +1479,29 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
}
#endif
+static int pxa2xx_spi_fw_translate_cs(struct spi_master *master, unsigned cs)
+{
+ struct driver_data *drv_data = spi_master_get_devdata(master);
+
+ if (has_acpi_companion(&drv_data->pdev->dev)) {
+ switch (drv_data->ssp_type) {
+ /*
+ * For Atoms the ACPI DeviceSelection used by the Windows
+ * driver starts from 1 instead of 0 so translate it here
+ * to match what Linux expects.
+ */
+ case LPSS_BYT_SSP:
+ case LPSS_BSW_SSP:
+ return cs - 1;
+
+ default:
+ break;
+ }
+ }
+
+ return cs;
+}
+
static int pxa2xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1490,6 +1554,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
master->setup = setup;
master->transfer_one_message = pxa2xx_spi_transfer_one_message;
master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
+ master->fw_translate_cs = pxa2xx_spi_fw_translate_cs;
master->auto_runtime_pm = true;
drv_data->ssp_type = ssp->type;
@@ -1576,6 +1641,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
tmp &= LPSS_CAPS_CS_EN_MASK;
tmp >>= LPSS_CAPS_CS_EN_SHIFT;
platform_info->num_chipselect = ffz(tmp);
+ } else if (config->cs_num) {
+ platform_info->num_chipselect = config->cs_num;
}
}
master->num_chipselect = platform_info->num_chipselect;
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 58efa98313aa..a1ef88948144 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -69,8 +69,6 @@ struct driver_data {
void *rx;
void *rx_end;
int dma_mapped;
- dma_addr_t rx_dma;
- dma_addr_t tx_dma;
size_t rx_map_len;
size_t tx_map_len;
u8 n_bytes;
@@ -147,20 +145,9 @@ static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
extern int pxa2xx_spi_flush(struct driver_data *drv_data);
extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
-/*
- * Select the right DMA implementation.
- */
-#if defined(CONFIG_SPI_PXA2XX_DMA)
-#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN SZ_64K
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
-#else
-#undef SPI_PXA2XX_USE_DMA
-#define MAX_DMA_LEN 0
-#define DEFAULT_DMA_CR1 0
-#endif
-#ifdef SPI_PXA2XX_USE_DMA
extern bool pxa2xx_spi_dma_is_possible(size_t len);
extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data);
extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
@@ -173,29 +160,5 @@ extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
u8 bits_per_word,
u32 *burst_code,
u32 *threshold);
-#else
-static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; }
-static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
-{
- return 0;
-}
-#define pxa2xx_spi_dma_transfer NULL
-static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
- u32 dma_burst) {}
-static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {}
-static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
-{
- return 0;
-}
-static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {}
-static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
- struct spi_device *spi,
- u8 bits_per_word,
- u32 *burst_code,
- u32 *threshold)
-{
- return -ENODEV;
-}
-#endif
#endif /* SPI_PXA2XX_H */
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 7cb1b2d710c1..26e2688c104e 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -13,20 +13,14 @@
*
*/
-#include <linux/init.h>
-#include <linux/module.h>
#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/spi/spi.h>
-#include <linux/scatterlist.h>
-#include <linux/of.h>
#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
#define DRIVER_NAME "rockchip-spi"
@@ -179,7 +173,7 @@ struct rockchip_spi {
u8 tmode;
u8 bpw;
u8 n_bytes;
- u8 rsd_nsecs;
+ u32 rsd_nsecs;
unsigned len;
u32 speed;
@@ -192,8 +186,6 @@ struct rockchip_spi {
/* protect state */
spinlock_t lock;
- struct completion xfer_completion;
-
u32 use_dma;
struct sg_table tx_sg;
struct sg_table rx_sg;
@@ -265,7 +257,10 @@ static inline u32 rx_max(struct rockchip_spi *rs)
static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)
{
u32 ser;
- struct rockchip_spi *rs = spi_master_get_devdata(spi->master);
+ struct spi_master *master = spi->master;
+ struct rockchip_spi *rs = spi_master_get_devdata(master);
+
+ pm_runtime_get_sync(rs->dev);
ser = readl_relaxed(rs->regs + ROCKCHIP_SPI_SER) & SER_MASK;
@@ -290,6 +285,8 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)
ser &= ~(1 << spi->chip_select);
writel_relaxed(ser, rs->regs + ROCKCHIP_SPI_SER);
+
+ pm_runtime_put_sync(rs->dev);
}
static int rockchip_spi_prepare_message(struct spi_master *master,
@@ -319,12 +316,12 @@ static void rockchip_spi_handle_err(struct spi_master *master,
*/
if (rs->use_dma) {
if (rs->state & RXBUSY) {
- dmaengine_terminate_all(rs->dma_rx.ch);
+ dmaengine_terminate_async(rs->dma_rx.ch);
flush_fifo(rs);
}
if (rs->state & TXBUSY)
- dmaengine_terminate_all(rs->dma_tx.ch);
+ dmaengine_terminate_async(rs->dma_tx.ch);
}
spin_unlock_irqrestore(&rs->lock, flags);
@@ -433,7 +430,7 @@ static void rockchip_spi_dma_txcb(void *data)
spin_unlock_irqrestore(&rs->lock, flags);
}
-static void rockchip_spi_prepare_dma(struct rockchip_spi *rs)
+static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
{
unsigned long flags;
struct dma_slave_config rxconf, txconf;
@@ -456,6 +453,8 @@ static void rockchip_spi_prepare_dma(struct rockchip_spi *rs)
rs->dma_rx.ch,
rs->rx_sg.sgl, rs->rx_sg.nents,
rs->dma_rx.direction, DMA_PREP_INTERRUPT);
+ if (!rxdesc)
+ return -EINVAL;
rxdesc->callback = rockchip_spi_dma_rxcb;
rxdesc->callback_param = rs;
@@ -473,6 +472,11 @@ static void rockchip_spi_prepare_dma(struct rockchip_spi *rs)
rs->dma_tx.ch,
rs->tx_sg.sgl, rs->tx_sg.nents,
rs->dma_tx.direction, DMA_PREP_INTERRUPT);
+ if (!txdesc) {
+ if (rxdesc)
+ dmaengine_terminate_sync(rs->dma_rx.ch);
+ return -EINVAL;
+ }
txdesc->callback = rockchip_spi_dma_txcb;
txdesc->callback_param = rs;
@@ -494,6 +498,8 @@ static void rockchip_spi_prepare_dma(struct rockchip_spi *rs)
dmaengine_submit(txdesc);
dma_async_issue_pending(rs->dma_tx.ch);
}
+
+ return 0;
}
static void rockchip_spi_config(struct rockchip_spi *rs)
@@ -503,7 +509,8 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
int rsd = 0;
u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET)
- | (CR0_SSD_ONE << CR0_SSD_OFFSET);
+ | (CR0_SSD_ONE << CR0_SSD_OFFSET)
+ | (CR0_EM_BIG << CR0_EM_OFFSET);
cr0 |= (rs->n_bytes << CR0_DFS_OFFSET);
cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET);
@@ -606,12 +613,12 @@ static int rockchip_spi_transfer_one(
if (rs->use_dma) {
if (rs->tmode == CR0_XFM_RO) {
/* rx: dma must be prepared first */
- rockchip_spi_prepare_dma(rs);
+ ret = rockchip_spi_prepare_dma(rs);
spi_enable_chip(rs, 1);
} else {
/* tx or tr: spi must be enabled first */
spi_enable_chip(rs, 1);
- rockchip_spi_prepare_dma(rs);
+ ret = rockchip_spi_prepare_dma(rs);
}
} else {
spi_enable_chip(rs, 1);
@@ -717,8 +724,14 @@ static int rockchip_spi_probe(struct platform_device *pdev)
master->handle_err = rockchip_spi_handle_err;
rs->dma_tx.ch = dma_request_slave_channel(rs->dev, "tx");
- if (!rs->dma_tx.ch)
+ if (IS_ERR_OR_NULL(rs->dma_tx.ch)) {
+ /* Check tx to see if we need defer probing driver */
+ if (PTR_ERR(rs->dma_tx.ch) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_get_fifo_len;
+ }
dev_warn(rs->dev, "Failed to request TX DMA channel\n");
+ }
rs->dma_rx.ch = dma_request_slave_channel(rs->dev, "rx");
if (!rs->dma_rx.ch) {
@@ -871,6 +884,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = {
{ .compatible = "rockchip,rk3066-spi", },
{ .compatible = "rockchip,rk3188-spi", },
{ .compatible = "rockchip,rk3288-spi", },
+ { .compatible = "rockchip,rk3399-spi", },
{ },
};
MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 64318fcfacf2..eac3c960b2de 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -31,6 +31,8 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/spi/spi.h>
@@ -44,8 +46,9 @@ struct ti_qspi {
struct spi_master *master;
void __iomem *base;
- void __iomem *ctrl_base;
void __iomem *mmap_base;
+ struct regmap *ctrl_base;
+ unsigned int ctrl_reg;
struct clk *fclk;
struct device *dev;
@@ -55,7 +58,7 @@ struct ti_qspi {
u32 cmd;
u32 dc;
- bool ctrl_mod;
+ bool mmap_enabled;
};
#define QSPI_PID (0x0)
@@ -65,11 +68,8 @@ struct ti_qspi {
#define QSPI_SPI_CMD_REG (0x48)
#define QSPI_SPI_STATUS_REG (0x4c)
#define QSPI_SPI_DATA_REG (0x50)
-#define QSPI_SPI_SETUP0_REG (0x54)
+#define QSPI_SPI_SETUP_REG(n) ((0x54 + 4 * n))
#define QSPI_SPI_SWITCH_REG (0x64)
-#define QSPI_SPI_SETUP1_REG (0x58)
-#define QSPI_SPI_SETUP2_REG (0x5c)
-#define QSPI_SPI_SETUP3_REG (0x60)
#define QSPI_SPI_DATA_REG_1 (0x68)
#define QSPI_SPI_DATA_REG_2 (0x6c)
#define QSPI_SPI_DATA_REG_3 (0x70)
@@ -109,6 +109,17 @@ struct ti_qspi {
#define QSPI_AUTOSUSPEND_TIMEOUT 2000
+#define MEM_CS_EN(n) ((n + 1) << 8)
+#define MEM_CS_MASK (7 << 8)
+
+#define MM_SWITCH 0x1
+
+#define QSPI_SETUP_RD_NORMAL (0x0 << 12)
+#define QSPI_SETUP_RD_DUAL (0x1 << 12)
+#define QSPI_SETUP_RD_QUAD (0x3 << 12)
+#define QSPI_SETUP_ADDR_SHIFT 8
+#define QSPI_SETUP_DUMMY_SHIFT 10
+
static inline unsigned long ti_qspi_read(struct ti_qspi *qspi,
unsigned long reg)
{
@@ -366,6 +377,72 @@ static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t)
return 0;
}
+static void ti_qspi_enable_memory_map(struct spi_device *spi)
+{
+ struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
+
+ ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
+ if (qspi->ctrl_base) {
+ regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
+ MEM_CS_EN(spi->chip_select),
+ MEM_CS_MASK);
+ }
+ qspi->mmap_enabled = true;
+}
+
+static void ti_qspi_disable_memory_map(struct spi_device *spi)
+{
+ struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
+
+ ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG);
+ if (qspi->ctrl_base)
+ regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
+ 0, MEM_CS_MASK);
+ qspi->mmap_enabled = false;
+}
+
+static void ti_qspi_setup_mmap_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
+ u32 memval = msg->read_opcode;
+
+ switch (msg->data_nbits) {
+ case SPI_NBITS_QUAD:
+ memval |= QSPI_SETUP_RD_QUAD;
+ break;
+ case SPI_NBITS_DUAL:
+ memval |= QSPI_SETUP_RD_DUAL;
+ break;
+ default:
+ memval |= QSPI_SETUP_RD_NORMAL;
+ break;
+ }
+ memval |= ((msg->addr_width - 1) << QSPI_SETUP_ADDR_SHIFT |
+ msg->dummy_bytes << QSPI_SETUP_DUMMY_SHIFT);
+ ti_qspi_write(qspi, memval,
+ QSPI_SPI_SETUP_REG(spi->chip_select));
+}
+
+static int ti_qspi_spi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+{
+ struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
+ int ret = 0;
+
+ mutex_lock(&qspi->list_lock);
+
+ if (!qspi->mmap_enabled)
+ ti_qspi_enable_memory_map(spi);
+ ti_qspi_setup_mmap_read(spi, msg);
+ memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
+ msg->retlen = msg->len;
+
+ mutex_unlock(&qspi->list_lock);
+
+ return ret;
+}
+
static int ti_qspi_start_transfer_one(struct spi_master *master,
struct spi_message *m)
{
@@ -398,6 +475,9 @@ static int ti_qspi_start_transfer_one(struct spi_master *master,
mutex_lock(&qspi->list_lock);
+ if (qspi->mmap_enabled)
+ ti_qspi_disable_memory_map(spi);
+
list_for_each_entry(t, &m->transfers, transfer_list) {
qspi->cmd |= QSPI_WLEN(t->bits_per_word);
@@ -441,7 +521,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
{
struct ti_qspi *qspi;
struct spi_master *master;
- struct resource *r, *res_ctrl, *res_mmap;
+ struct resource *r, *res_mmap;
struct device_node *np = pdev->dev.of_node;
u32 max_freq;
int ret = 0, num_cs, irq;
@@ -487,16 +567,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
}
}
- res_ctrl = platform_get_resource_byname(pdev,
- IORESOURCE_MEM, "qspi_ctrlmod");
- if (res_ctrl == NULL) {
- res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- if (res_ctrl == NULL) {
- dev_dbg(&pdev->dev,
- "control module resources not required\n");
- }
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
@@ -511,20 +581,31 @@ static int ti_qspi_probe(struct platform_device *pdev)
goto free_master;
}
- if (res_ctrl) {
- qspi->ctrl_mod = true;
- qspi->ctrl_base = devm_ioremap_resource(&pdev->dev, res_ctrl);
- if (IS_ERR(qspi->ctrl_base)) {
- ret = PTR_ERR(qspi->ctrl_base);
- goto free_master;
- }
- }
-
if (res_mmap) {
- qspi->mmap_base = devm_ioremap_resource(&pdev->dev, res_mmap);
+ qspi->mmap_base = devm_ioremap_resource(&pdev->dev,
+ res_mmap);
+ master->spi_flash_read = ti_qspi_spi_flash_read;
if (IS_ERR(qspi->mmap_base)) {
- ret = PTR_ERR(qspi->mmap_base);
- goto free_master;
+ dev_err(&pdev->dev,
+ "falling back to PIO mode\n");
+ master->spi_flash_read = NULL;
+ }
+ }
+ qspi->mmap_enabled = false;
+
+ if (of_property_read_bool(np, "syscon-chipselects")) {
+ qspi->ctrl_base =
+ syscon_regmap_lookup_by_phandle(np,
+ "syscon-chipselects");
+ if (IS_ERR(qspi->ctrl_base))
+ return PTR_ERR(qspi->ctrl_base);
+ ret = of_property_read_u32_index(np,
+ "syscon-chipselects",
+ 1, &qspi->ctrl_reg);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "couldn't get ctrl_mod reg index\n");
+ return ret;
}
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 47eff8012a77..de2f2f90d799 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -144,6 +144,8 @@ SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
+SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
+
static struct attribute *spi_dev_attrs[] = {
&dev_attr_modalias.attr,
NULL,
@@ -181,6 +183,7 @@ static struct attribute *spi_device_statistics_attrs[] = {
&dev_attr_spi_device_transfer_bytes_histo14.attr,
&dev_attr_spi_device_transfer_bytes_histo15.attr,
&dev_attr_spi_device_transfer_bytes_histo16.attr,
+ &dev_attr_spi_device_transfers_split_maxsize.attr,
NULL,
};
@@ -223,6 +226,7 @@ static struct attribute *spi_master_statistics_attrs[] = {
&dev_attr_spi_master_transfer_bytes_histo14.attr,
&dev_attr_spi_master_transfer_bytes_histo15.attr,
&dev_attr_spi_master_transfer_bytes_histo16.attr,
+ &dev_attr_spi_master_transfers_split_maxsize.attr,
NULL,
};
@@ -702,6 +706,7 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
enum dma_data_direction dir)
{
const bool vmalloced_buf = is_vmalloc_addr(buf);
+ unsigned int max_seg_size = dma_get_max_seg_size(dev);
int desc_len;
int sgs;
struct page *vm_page;
@@ -710,10 +715,10 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
int i, ret;
if (vmalloced_buf) {
- desc_len = PAGE_SIZE;
+ desc_len = min_t(int, max_seg_size, PAGE_SIZE);
sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
} else {
- desc_len = master->max_dma_len;
+ desc_len = min_t(int, max_seg_size, master->max_dma_len);
sgs = DIV_ROUND_UP(len, desc_len);
}
@@ -739,7 +744,6 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
sg_set_buf(&sgt->sgl[i], sg_buf, min);
}
-
buf += min;
len -= min;
}
@@ -1024,6 +1028,8 @@ out:
if (msg->status && master->handle_err)
master->handle_err(master, msg);
+ spi_res_release(master, msg);
+
spi_finalize_current_message(master);
return ret;
@@ -1047,6 +1053,7 @@ EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
* __spi_pump_messages - function which processes spi message queue
* @master: master to process queue for
* @in_kthread: true if we are in the context of the message pump thread
+ * @bus_locked: true if the bus mutex is held when calling this function
*
* This function checks if there is any spi message in the queue that
* needs processing and if so call out to the driver to initialize hardware
@@ -1056,7 +1063,8 @@ EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
* inside spi_sync(); the queue extraction handling at the top of the
* function should deal with this safely.
*/
-static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
+static void __spi_pump_messages(struct spi_master *master, bool in_kthread,
+ bool bus_locked)
{
unsigned long flags;
bool was_busy = false;
@@ -1152,6 +1160,9 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
}
}
+ if (!bus_locked)
+ mutex_lock(&master->bus_lock_mutex);
+
trace_spi_message_start(master->cur_msg);
if (master->prepare_message) {
@@ -1161,7 +1172,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
"failed to prepare message: %d\n", ret);
master->cur_msg->status = ret;
spi_finalize_current_message(master);
- return;
+ goto out;
}
master->cur_msg_prepared = true;
}
@@ -1170,15 +1181,23 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
if (ret) {
master->cur_msg->status = ret;
spi_finalize_current_message(master);
- return;
+ goto out;
}
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
"failed to transfer one message from queue\n");
- return;
+ goto out;
}
+
+out:
+ if (!bus_locked)
+ mutex_unlock(&master->bus_lock_mutex);
+
+ /* Prod the scheduler in case transfer_one() was busy waiting */
+ if (!ret)
+ cond_resched();
}
/**
@@ -1190,7 +1209,7 @@ static void spi_pump_messages(struct kthread_work *work)
struct spi_master *master =
container_of(work, struct spi_master, pump_messages);
- __spi_pump_messages(master, true);
+ __spi_pump_messages(master, true, false);
}
static int spi_init_queue(struct spi_master *master)
@@ -1581,13 +1600,30 @@ static void of_register_spi_devices(struct spi_master *master) { }
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
struct spi_device *spi = data;
+ struct spi_master *master = spi->master;
if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
struct acpi_resource_spi_serialbus *sb;
sb = &ares->data.spi_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
- spi->chip_select = sb->device_selection;
+ /*
+ * ACPI DeviceSelection numbering is handled by the
+ * host controller driver in Windows and can vary
+ * from driver to driver. In Linux we always expect
+ * 0 .. max - 1 so we need to ask the driver to
+ * translate between the two schemes.
+ */
+ if (master->fw_translate_cs) {
+ int cs = master->fw_translate_cs(master,
+ sb->device_selection);
+ if (cs < 0)
+ return cs;
+ spi->chip_select = cs;
+ } else {
+ spi->chip_select = sb->device_selection;
+ }
+
spi->max_speed_hz = sb->connection_speed;
if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
@@ -2013,6 +2049,336 @@ struct spi_master *spi_busnum_to_master(u16 bus_num)
}
EXPORT_SYMBOL_GPL(spi_busnum_to_master);
+/*-------------------------------------------------------------------------*/
+
+/* Core methods for SPI resource management */
+
+/**
+ * spi_res_alloc - allocate a spi resource that is life-cycle managed
+ * during the processing of a spi_message while using
+ * spi_transfer_one
+ * @spi: the spi device for which we allocate memory
+ * @release: the release code to execute for this resource
+ * @size: size to alloc and return
+ * @gfp: GFP allocation flags
+ *
+ * Return: the pointer to the allocated data
+ *
+ * This may get enhanced in the future to allocate from a memory pool
+ * of the @spi_device or @spi_master to avoid repeated allocations.
+ */
+void *spi_res_alloc(struct spi_device *spi,
+ spi_res_release_t release,
+ size_t size, gfp_t gfp)
+{
+ struct spi_res *sres;
+
+ sres = kzalloc(sizeof(*sres) + size, gfp);
+ if (!sres)
+ return NULL;
+
+ INIT_LIST_HEAD(&sres->entry);
+ sres->release = release;
+
+ return sres->data;
+}
+EXPORT_SYMBOL_GPL(spi_res_alloc);
+
+/**
+ * spi_res_free - free an spi resource
+ * @res: pointer to the custom data of a resource
+ *
+ */
+void spi_res_free(void *res)
+{
+ struct spi_res *sres = container_of(res, struct spi_res, data);
+
+ if (!res)
+ return;
+
+ WARN_ON(!list_empty(&sres->entry));
+ kfree(sres);
+}
+EXPORT_SYMBOL_GPL(spi_res_free);
+
+/**
+ * spi_res_add - add a spi_res to the spi_message
+ * @message: the spi message
+ * @res: the spi_resource
+ */
+void spi_res_add(struct spi_message *message, void *res)
+{
+ struct spi_res *sres = container_of(res, struct spi_res, data);
+
+ WARN_ON(!list_empty(&sres->entry));
+ list_add_tail(&sres->entry, &message->resources);
+}
+EXPORT_SYMBOL_GPL(spi_res_add);
+
+/**
+ * spi_res_release - release all spi resources for this message
+ * @master: the @spi_master
+ * @message: the @spi_message
+ */
+void spi_res_release(struct spi_master *master,
+ struct spi_message *message)
+{
+ struct spi_res *res;
+
+ while (!list_empty(&message->resources)) {
+ res = list_last_entry(&message->resources,
+ struct spi_res, entry);
+
+ if (res->release)
+ res->release(master, message, res->data);
+
+ list_del(&res->entry);
+
+ kfree(res);
+ }
+}
+EXPORT_SYMBOL_GPL(spi_res_release);
+
+/*-------------------------------------------------------------------------*/
+
+/* Core methods for spi_message alterations */
+
+static void __spi_replace_transfers_release(struct spi_master *master,
+ struct spi_message *msg,
+ void *res)
+{
+ struct spi_replaced_transfers *rxfer = res;
+ size_t i;
+
+ /* call extra callback if requested */
+ if (rxfer->release)
+ rxfer->release(master, msg, res);
+
+ /* insert replaced transfers back into the message */
+ list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
+
+ /* remove the formerly inserted entries */
+ for (i = 0; i < rxfer->inserted; i++)
+ list_del(&rxfer->inserted_transfers[i].transfer_list);
+}
+
+/**
+ * spi_replace_transfers - replace transfers with several transfers
+ * and register change with spi_message.resources
+ * @msg: the spi_message we work upon
+ * @xfer_first: the first spi_transfer we want to replace
+ * @remove: number of transfers to remove
+ * @insert: the number of transfers we want to insert instead
+ * @release: extra release code necessary in some circumstances
+ * @extradatasize: extra data to allocate (with alignment guarantees
+ * of struct @spi_transfer)
+ * @gfp: gfp flags
+ *
+ * Returns: pointer to @spi_replaced_transfers,
+ * PTR_ERR(...) in case of errors.
+ */
+struct spi_replaced_transfers *spi_replace_transfers(
+ struct spi_message *msg,
+ struct spi_transfer *xfer_first,
+ size_t remove,
+ size_t insert,
+ spi_replaced_release_t release,
+ size_t extradatasize,
+ gfp_t gfp)
+{
+ struct spi_replaced_transfers *rxfer;
+ struct spi_transfer *xfer;
+ size_t i;
+
+ /* allocate the structure using spi_res */
+ rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
+ insert * sizeof(struct spi_transfer)
+ + sizeof(struct spi_replaced_transfers)
+ + extradatasize,
+ gfp);
+ if (!rxfer)
+ return ERR_PTR(-ENOMEM);
+
+ /* the release code to invoke before running the generic release */
+ rxfer->release = release;
+
+ /* assign extradata */
+ if (extradatasize)
+ rxfer->extradata =
+ &rxfer->inserted_transfers[insert];
+
+ /* init the replaced_transfers list */
+ INIT_LIST_HEAD(&rxfer->replaced_transfers);
+
+ /* assign the list_entry after which we should reinsert
+ * the @replaced_transfers - it may be spi_message.messages!
+ */
+ rxfer->replaced_after = xfer_first->transfer_list.prev;
+
+ /* remove the requested number of transfers */
+ for (i = 0; i < remove; i++) {
+ /* if the entry after replaced_after it is msg->transfers
+ * then we have been requested to remove more transfers
+ * than are in the list
+ */
+ if (rxfer->replaced_after->next == &msg->transfers) {
+ dev_err(&msg->spi->dev,
+ "requested to remove more spi_transfers than are available\n");
+ /* insert replaced transfers back into the message */
+ list_splice(&rxfer->replaced_transfers,
+ rxfer->replaced_after);
+
+ /* free the spi_replace_transfer structure */
+ spi_res_free(rxfer);
+
+ /* and return with an error */
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* remove the entry after replaced_after from list of
+ * transfers and add it to list of replaced_transfers
+ */
+ list_move_tail(rxfer->replaced_after->next,
+ &rxfer->replaced_transfers);
+ }
+
+ /* create copy of the given xfer with identical settings
+ * based on the first transfer to get removed
+ */
+ for (i = 0; i < insert; i++) {
+ /* we need to run in reverse order */
+ xfer = &rxfer->inserted_transfers[insert - 1 - i];
+
+ /* copy all spi_transfer data */
+ memcpy(xfer, xfer_first, sizeof(*xfer));
+
+ /* add to list */
+ list_add(&xfer->transfer_list, rxfer->replaced_after);
+
+ /* clear cs_change and delay_usecs for all but the last */
+ if (i) {
+ xfer->cs_change = false;
+ xfer->delay_usecs = 0;
+ }
+ }
+
+ /* set up inserted */
+ rxfer->inserted = insert;
+
+ /* and register it with spi_res/spi_message */
+ spi_res_add(msg, rxfer);
+
+ return rxfer;
+}
+EXPORT_SYMBOL_GPL(spi_replace_transfers);
+
+static int __spi_split_transfer_maxsize(struct spi_master *master,
+ struct spi_message *msg,
+ struct spi_transfer **xferp,
+ size_t maxsize,
+ gfp_t gfp)
+{
+ struct spi_transfer *xfer = *xferp, *xfers;
+ struct spi_replaced_transfers *srt;
+ size_t offset;
+ size_t count, i;
+
+ /* warn once about this fact that we are splitting a transfer */
+ dev_warn_once(&msg->spi->dev,
+ "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
+ xfer->len, maxsize);
+
+ /* calculate how many we have to replace */
+ count = DIV_ROUND_UP(xfer->len, maxsize);
+
+ /* create replacement */
+ srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
+ if (IS_ERR(srt))
+ return PTR_ERR(srt);
+ xfers = srt->inserted_transfers;
+
+ /* now handle each of those newly inserted spi_transfers
+ * note that the replacements spi_transfers all are preset
+ * to the same values as *xferp, so tx_buf, rx_buf and len
+ * are all identical (as well as most others)
+ * so we just have to fix up len and the pointers.
+ *
+ * this also includes support for the depreciated
+ * spi_message.is_dma_mapped interface
+ */
+
+ /* the first transfer just needs the length modified, so we
+ * run it outside the loop
+ */
+ xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
+
+ /* all the others need rx_buf/tx_buf also set */
+ for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
+ /* update rx_buf, tx_buf and dma */
+ if (xfers[i].rx_buf)
+ xfers[i].rx_buf += offset;
+ if (xfers[i].rx_dma)
+ xfers[i].rx_dma += offset;
+ if (xfers[i].tx_buf)
+ xfers[i].tx_buf += offset;
+ if (xfers[i].tx_dma)
+ xfers[i].tx_dma += offset;
+
+ /* update length */
+ xfers[i].len = min(maxsize, xfers[i].len - offset);
+ }
+
+ /* we set up xferp to the last entry we have inserted,
+ * so that we skip those already split transfers
+ */
+ *xferp = &xfers[count - 1];
+
+ /* increment statistics counters */
+ SPI_STATISTICS_INCREMENT_FIELD(&master->statistics,
+ transfers_split_maxsize);
+ SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
+ transfers_split_maxsize);
+
+ return 0;
+}
+
+/**
+ * spi_split_tranfers_maxsize - split spi transfers into multiple transfers
+ * when an individual transfer exceeds a
+ * certain size
+ * @master: the @spi_master for this transfer
+ * @msg: the @spi_message to transform
+ * @maxsize: the maximum when to apply this
+ * @gfp: GFP allocation flags
+ *
+ * Return: status of transformation
+ */
+int spi_split_transfers_maxsize(struct spi_master *master,
+ struct spi_message *msg,
+ size_t maxsize,
+ gfp_t gfp)
+{
+ struct spi_transfer *xfer;
+ int ret;
+
+ /* iterate over the transfer_list,
+ * but note that xfer is advanced to the last transfer inserted
+ * to avoid checking sizes again unnecessarily (also xfer does
+ * potentiall belong to a different list by the time the
+ * replacement has happened
+ */
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ if (xfer->len > maxsize) {
+ ret = __spi_split_transfer_maxsize(
+ master, msg, &xfer, maxsize, gfp);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
/*-------------------------------------------------------------------------*/
@@ -2351,6 +2717,46 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
EXPORT_SYMBOL_GPL(spi_async_locked);
+int spi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg)
+
+{
+ struct spi_master *master = spi->master;
+ int ret;
+
+ if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
+ msg->addr_nbits == SPI_NBITS_DUAL) &&
+ !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
+ return -EINVAL;
+ if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
+ msg->addr_nbits == SPI_NBITS_QUAD) &&
+ !(spi->mode & SPI_TX_QUAD))
+ return -EINVAL;
+ if (msg->data_nbits == SPI_NBITS_DUAL &&
+ !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
+ return -EINVAL;
+ if (msg->data_nbits == SPI_NBITS_QUAD &&
+ !(spi->mode & SPI_RX_QUAD))
+ return -EINVAL;
+
+ if (master->auto_runtime_pm) {
+ ret = pm_runtime_get_sync(master->dev.parent);
+ if (ret < 0) {
+ dev_err(&master->dev, "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+ mutex_lock(&master->bus_lock_mutex);
+ ret = master->spi_flash_read(spi, msg);
+ mutex_unlock(&master->bus_lock_mutex);
+ if (master->auto_runtime_pm)
+ pm_runtime_put(master->dev.parent);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_flash_read);
+
/*-------------------------------------------------------------------------*/
/* Utility methods for SPI master protocol drivers, layered on
@@ -2414,7 +2820,7 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message,
spi_sync_immediate);
SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
spi_sync_immediate);
- __spi_pump_messages(master, false);
+ __spi_pump_messages(master, false, bus_locked);
}
wait_for_completion(&done);
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index c2f2574ff61c..2a097d176ba9 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -197,6 +197,7 @@ enum pxa_ssp_type {
QUARK_X1000_SSP,
LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
LPSS_BYT_SSP,
+ LPSS_BSW_SSP,
LPSS_SPT_SSP,
LPSS_BXT_SSP,
};
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 53be3a4c60cb..857a9a1d82b5 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -25,6 +25,7 @@
struct dma_chan;
struct spi_master;
struct spi_transfer;
+struct spi_flash_read_message;
/*
* INTERFACES between SPI master-side drivers and SPI infrastructure.
@@ -53,6 +54,10 @@ extern struct bus_type spi_bus_type;
*
* @transfer_bytes_histo:
* transfer bytes histogramm
+ *
+ * @transfers_split_maxsize:
+ * number of transfers that have been split because of
+ * maxsize limit
*/
struct spi_statistics {
spinlock_t lock; /* lock for the whole structure */
@@ -72,6 +77,8 @@ struct spi_statistics {
#define SPI_STATISTICS_HISTO_SIZE 17
unsigned long transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE];
+
+ unsigned long transfers_split_maxsize;
};
void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
@@ -303,6 +310,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @min_speed_hz: Lowest supported transfer speed
* @max_speed_hz: Highest supported transfer speed
* @flags: other constraints relevant to this driver
+ * @max_transfer_size: function that returns the max transfer size for
+ * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used.
* @bus_lock_spinlock: spinlock for SPI bus locking
* @bus_lock_mutex: mutex for SPI bus locking
* @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
@@ -361,6 +370,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @handle_err: the subsystem calls the driver to handle an error that occurs
* in the generic implementation of transfer_one_message().
* @unprepare_message: undo any work done by prepare_message().
+ * @spi_flash_read: to support spi-controller hardwares that provide
+ * accelerated interface to read from flash devices.
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
@@ -369,6 +380,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @dma_rx: DMA receive channel
* @dummy_rx: dummy receive buffer for full-duplex devices
* @dummy_tx: dummy transmit buffer for full-duplex devices
+ * @fw_translate_cs: If the boot firmware uses different numbering scheme
+ * what Linux expects, this optional hook can be used to translate
+ * between the two.
*
* Each SPI master controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
@@ -513,6 +527,8 @@ struct spi_master {
struct spi_message *message);
int (*unprepare_message)(struct spi_master *master,
struct spi_message *message);
+ int (*spi_flash_read)(struct spi_device *spi,
+ struct spi_flash_read_message *msg);
/*
* These hooks are for drivers that use a generic implementation
@@ -537,6 +553,8 @@ struct spi_master {
/* dummy data for full duplex devices */
void *dummy_rx;
void *dummy_tx;
+
+ int (*fw_translate_cs)(struct spi_master *master, unsigned cs);
};
static inline void *spi_master_get_devdata(struct spi_master *master)
@@ -582,6 +600,38 @@ extern void spi_unregister_master(struct spi_master *master);
extern struct spi_master *spi_busnum_to_master(u16 busnum);
+/*
+ * SPI resource management while processing a SPI message
+ */
+
+typedef void (*spi_res_release_t)(struct spi_master *master,
+ struct spi_message *msg,
+ void *res);
+
+/**
+ * struct spi_res - spi resource management structure
+ * @entry: list entry
+ * @release: release code called prior to freeing this resource
+ * @data: extra data allocated for the specific use-case
+ *
+ * this is based on ideas from devres, but focused on life-cycle
+ * management during spi_message processing
+ */
+struct spi_res {
+ struct list_head entry;
+ spi_res_release_t release;
+ unsigned long long data[]; /* guarantee ull alignment */
+};
+
+extern void *spi_res_alloc(struct spi_device *spi,
+ spi_res_release_t release,
+ size_t size, gfp_t gfp);
+extern void spi_res_add(struct spi_message *message, void *res);
+extern void spi_res_free(void *res);
+
+extern void spi_res_release(struct spi_master *master,
+ struct spi_message *message);
+
/*---------------------------------------------------------------------------*/
/*
@@ -720,6 +770,7 @@ struct spi_transfer {
* @status: zero for success, else negative errno
* @queue: for use by whichever driver currently owns the message
* @state: for use by whichever driver currently owns the message
+ * @resources: for resource management when the spi message is processed
*
* A @spi_message is used to execute an atomic sequence of data transfers,
* each represented by a struct spi_transfer. The sequence is "atomic"
@@ -766,11 +817,15 @@ struct spi_message {
*/
struct list_head queue;
void *state;
+
+ /* list of spi_res reources when the spi message is processed */
+ struct list_head resources;
};
static inline void spi_message_init_no_memset(struct spi_message *m)
{
INIT_LIST_HEAD(&m->transfers);
+ INIT_LIST_HEAD(&m->resources);
}
static inline void spi_message_init(struct spi_message *m)
@@ -854,6 +909,60 @@ spi_max_transfer_size(struct spi_device *spi)
/*---------------------------------------------------------------------------*/
+/* SPI transfer replacement methods which make use of spi_res */
+
+struct spi_replaced_transfers;
+typedef void (*spi_replaced_release_t)(struct spi_master *master,
+ struct spi_message *msg,
+ struct spi_replaced_transfers *res);
+/**
+ * struct spi_replaced_transfers - structure describing the spi_transfer
+ * replacements that have occurred
+ * so that they can get reverted
+ * @release: some extra release code to get executed prior to
+ * relasing this structure
+ * @extradata: pointer to some extra data if requested or NULL
+ * @replaced_transfers: transfers that have been replaced and which need
+ * to get restored
+ * @replaced_after: the transfer after which the @replaced_transfers
+ * are to get re-inserted
+ * @inserted: number of transfers inserted
+ * @inserted_transfers: array of spi_transfers of array-size @inserted,
+ * that have been replacing replaced_transfers
+ *
+ * note: that @extradata will point to @inserted_transfers[@inserted]
+ * if some extra allocation is requested, so alignment will be the same
+ * as for spi_transfers
+ */
+struct spi_replaced_transfers {
+ spi_replaced_release_t release;
+ void *extradata;
+ struct list_head replaced_transfers;
+ struct list_head *replaced_after;
+ size_t inserted;
+ struct spi_transfer inserted_transfers[];
+};
+
+extern struct spi_replaced_transfers *spi_replace_transfers(
+ struct spi_message *msg,
+ struct spi_transfer *xfer_first,
+ size_t remove,
+ size_t insert,
+ spi_replaced_release_t release,
+ size_t extradatasize,
+ gfp_t gfp);
+
+/*---------------------------------------------------------------------------*/
+
+/* SPI transfer transformation methods */
+
+extern int spi_split_transfers_maxsize(struct spi_master *master,
+ struct spi_message *msg,
+ size_t maxsize,
+ gfp_t gfp);
+
+/*---------------------------------------------------------------------------*/
+
/* All these synchronous SPI transfer routines are utilities layered
* over the core async transfer primitive. Here, "synchronous" means
* they will sleep uninterruptibly until the async transfer completes.
@@ -1019,6 +1128,42 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
return be16_to_cpu(result);
}
+/**
+ * struct spi_flash_read_message - flash specific information for
+ * spi-masters that provide accelerated flash read interfaces
+ * @buf: buffer to read data
+ * @from: offset within the flash from where data is to be read
+ * @len: length of data to be read
+ * @retlen: actual length of data read
+ * @read_opcode: read_opcode to be used to communicate with flash
+ * @addr_width: number of address bytes
+ * @dummy_bytes: number of dummy bytes
+ * @opcode_nbits: number of lines to send opcode
+ * @addr_nbits: number of lines to send address
+ * @data_nbits: number of lines for data
+ */
+struct spi_flash_read_message {
+ void *buf;
+ loff_t from;
+ size_t len;
+ size_t retlen;
+ u8 read_opcode;
+ u8 addr_width;
+ u8 dummy_bytes;
+ u8 opcode_nbits;
+ u8 addr_nbits;
+ u8 data_nbits;
+};
+
+/* SPI core interface for flash read support */
+static inline bool spi_flash_read_supported(struct spi_device *spi)
+{
+ return spi->master->spi_flash_read ? true : false;
+}
+
+int spi_flash_read(struct spi_device *spi,
+ struct spi_flash_read_message *msg);
+
/*---------------------------------------------------------------------------*/
/*