summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt5
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi60
-rw-r--r--arch/arm/boot/dts/kizbox.dts2
-rw-r--r--arch/arm/configs/at91_dt_defconfig3
-rw-r--r--arch/arm/mach-at91/setup.c2
6 files changed, 51 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 3a268127b054..bc50899e0c81 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -81,7 +81,8 @@ PA31 TXD4
Required properties for pin configuration node:
- atmel,pins: 4 integers array, represents a group of pins mux and config
setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
- The PERIPH 0 means gpio.
+ The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+ PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
Bits used for CONFIG:
PULL_UP (1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A */
- 1 15 0x1 0x1>; /* PB15 periph with pullup */
+ 1 15 0x1 0x1>; /* PB15 periph A with pullup */
};
};
};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e154f242c680..222047f1ece9 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -336,8 +336,8 @@
i2c@0 {
compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
+ gpios = <&pioA 25 0 /* sda */
+ &pioA 26 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 3a47cf952146..8ecca6948d81 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -143,6 +143,11 @@
atmel,pins =
<0 3 0x1 0x0>; /* PA3 periph A */
};
+
+ pinctrl_usart0_sck: usart0_sck-0 {
+ atmel,pins =
+ <0 4 0x1 0x0>; /* PA4 periph A */
+ };
};
usart1 {
@@ -154,12 +159,17 @@
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
- <3 27 0x3 0x0>; /* PC27 periph C */
+ <2 27 0x3 0x0>; /* PC27 periph C */
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
- <3 28 0x3 0x0>; /* PC28 periph C */
+ <2 28 0x3 0x0>; /* PC28 periph C */
+ };
+
+ pinctrl_usart1_sck: usart1_sck-0 {
+ atmel,pins =
+ <2 28 0x3 0x0>; /* PC29 periph C */
};
};
@@ -172,46 +182,56 @@
pinctrl_uart2_rts: uart2_rts-0 {
atmel,pins =
- <0 0 0x2 0x0>; /* PB0 periph B */
+ <1 0 0x2 0x0>; /* PB0 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
atmel,pins =
- <0 1 0x2 0x0>; /* PB1 periph B */
+ <1 1 0x2 0x0>; /* PB1 periph B */
+ };
+
+ pinctrl_usart2_sck: usart2_sck-0 {
+ atmel,pins =
+ <1 2 0x2 0x0>; /* PB2 periph B */
};
};
usart3 {
pinctrl_uart3: usart3-0 {
atmel,pins =
- <3 23 0x2 0x1 /* PC22 periph B with pullup */
- 3 23 0x2 0x0>; /* PC23 periph B */
+ <2 23 0x2 0x1 /* PC22 periph B with pullup */
+ 2 23 0x2 0x0>; /* PC23 periph B */
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
- <3 24 0x2 0x0>; /* PC24 periph B */
+ <2 24 0x2 0x0>; /* PC24 periph B */
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
- <3 25 0x2 0x0>; /* PC25 periph B */
+ <2 25 0x2 0x0>; /* PC25 periph B */
+ };
+
+ pinctrl_usart3_sck: usart3_sck-0 {
+ atmel,pins =
+ <2 26 0x2 0x0>; /* PC26 periph B */
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
- <3 8 0x3 0x0 /* PC8 periph C */
- 3 9 0x3 0x1>; /* PC9 periph C with pullup */
+ <2 8 0x3 0x0 /* PC8 periph C */
+ 2 9 0x3 0x1>; /* PC9 periph C with pullup */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
- <3 16 0x3 0x0 /* PC16 periph C */
- 3 17 0x3 0x1>; /* PC17 periph C with pullup */
+ <2 16 0x3 0x0 /* PC16 periph C */
+ 2 17 0x3 0x1>; /* PC17 periph C with pullup */
};
};
@@ -240,14 +260,14 @@
pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
atmel,pins =
- <1 8 0x1 0x0 /* PA8 periph A */
- 1 11 0x1 0x0 /* PA11 periph A */
- 1 12 0x1 0x0 /* PA12 periph A */
- 1 13 0x1 0x0 /* PA13 periph A */
- 1 14 0x1 0x0 /* PA14 periph A */
- 1 15 0x1 0x0 /* PA15 periph A */
- 1 16 0x1 0x0 /* PA16 periph A */
- 1 17 0x1 0x0>; /* PA17 periph A */
+ <1 8 0x1 0x0 /* PB8 periph A */
+ 1 11 0x1 0x0 /* PB11 periph A */
+ 1 12 0x1 0x0 /* PB12 periph A */
+ 1 13 0x1 0x0 /* PB13 periph A */
+ 1 14 0x1 0x0 /* PB14 periph A */
+ 1 15 0x1 0x0 /* PB15 periph A */
+ 1 16 0x1 0x0 /* PB16 periph A */
+ 1 17 0x1 0x0>; /* PB17 periph A */
};
};
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index e8814fe0e277..b4dc3ed9a3ec 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -48,6 +48,8 @@
macb0: ethernet@fffc4000 {
phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
status = "okay";
};
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b175577d7abb..1ea959019fcd 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 9ee866ce0478..4b678478cf95 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
+ if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+ at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-25 06:11:42 +0000