diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mpc.yaml | 7 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 | ||||
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ali1563.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-cadence.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-master.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-eg20t.c | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-icy.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-mpc.c | 81 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-mt65xx.c | 5 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-nomadik.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ocores.c | 8 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-pnx.c | 8 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-qcom-geni.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-st.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-stm32f4.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 4 |
22 files changed, 142 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 7b553d559c83..98c6fcf7bf26 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -46,6 +46,13 @@ properties: description: | I2C bus timeout in microseconds + fsl,i2c-erratum-a004447: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicates the presence of QorIQ erratum A-004447, which + says that the standard i2c recovery scheme mechanism does + not work and an alternate implementation is needed. + required: - compatible - reg diff --git a/MAINTAINERS b/MAINTAINERS index 43819c4a71b2..503fd21901f1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17678,7 +17678,6 @@ R: Mika Westerberg <mika.westerberg@linux.intel.com> L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-designware-* -F: include/linux/platform_data/i2c-designware.h SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER M: Jaehoon Chung <jh80.chung@samsung.com> diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index c2717f31925a..ccda0a91abf0 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -122,7 +122,15 @@ }; /include/ "pq3-i2c-0.dtsi" + i2c@3000 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-i2c-1.dtsi" + i2c@3100 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-duart-0.dtsi" /include/ "pq3-espi-0.dtsi" spi0: spi@7000 { diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 872e4485dc3f..ddc018d42252 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -371,7 +371,23 @@ }; /include/ "qoriq-i2c-0.dtsi" + i2c@118000 { + fsl,i2c-erratum-a004447; + }; + + i2c@118100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-i2c-1.dtsi" + i2c@119000 { + fsl,i2c-erratum-a004447; + }; + + i2c@119100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 281a65d9b44b..10acece9d7b9 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -647,7 +647,7 @@ config I2C_HIGHLANDER config I2C_HISI tristate "HiSilicon I2C controller" - depends on ARM64 || COMPILE_TEST + depends on (ARM64 && ACPI) || COMPILE_TEST help Say Y here if you want to have Hisilicon I2C controller support available on the Kunpeng Server. diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 4d12e3da12f0..55a9e93fbfeb 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge * * Copyright (C) 2004 Patrick Mochel diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index c1bbc4caeb5c..66aafa7d1123 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -144,7 +144,7 @@ enum cdns_i2c_mode { }; /** - * enum cdns_i2c_slave_mode - Slave state when I2C is operating in slave mode + * enum cdns_i2c_slave_state - Slave state when I2C is operating in slave mode * * @CDNS_I2C_SLAVE_STATE_IDLE: I2C slave idle * @CDNS_I2C_SLAVE_STATE_SEND: I2C slave sending data to master diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 13be1d678c39..9b08bb5df38d 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -165,7 +165,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) } /** - * i2c_dw_init() - Initialize the designware I2C master hardware + * i2c_dw_init_master() - Initialize the designware I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 843b31a0f752..321b2770feab 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -148,7 +148,7 @@ struct i2c_algo_pch_data { /** * struct adapter_info - This structure holds the adapter information for the - PCH i2c controller + * PCH i2c controller * @pch_data: stores a list of i2c_algo_pch_data * @pch_i2c_suspended: specifies whether the system is suspended or not * perhaps with more lines and words. @@ -358,6 +358,7 @@ static void pch_i2c_repstart(struct i2c_algo_pch_data *adap) /** * pch_i2c_writebytes() - write data to I2C bus in normal mode * @i2c_adap: Pointer to the struct i2c_adapter. + * @msgs: Pointer to the i2c message structure. * @last: specifies whether last message or not. * In the case of compound mode it will be 1 for last message, * otherwise 0. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 99d446763530..f9e1c2ceaac0 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -395,11 +395,9 @@ static int i801_check_post(struct i801_priv *priv, int status) dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); - outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, - SMBHSTCNT(priv)); + outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv)); usleep_range(1000, 2000); - outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), - SMBHSTCNT(priv)); + outb_p(0, SMBHSTCNT(priv)); /* Check if it worked */ status = inb_p(SMBHSTSTS(priv)); diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c index c8c422e9dda4..5dae7cab7260 100644 --- a/drivers/i2c/busses/i2c-icy.c +++ b/drivers/i2c/busses/i2c-icy.c @@ -123,7 +123,6 @@ static int icy_probe(struct zorro_dev *z, { struct icy_i2c *i2c; struct i2c_algo_pcf_data *algo_data; - struct fwnode_handle *new_fwnode; struct i2c_board_info ltc2990_info = { .type = "ltc2990", .swnode = &icy_ltc2990_node, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 30d9e89a3db2..dcca9c2396db 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/fsl_devices.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -45,6 +46,7 @@ #define CCR_MTX 0x10 #define CCR_TXAK 0x08 #define CCR_RSTA 0x04 +#define CCR_RSVD 0x02 #define CSR_MCF 0x80 #define CSR_MAAS 0x40 @@ -97,7 +99,7 @@ struct mpc_i2c { u32 block; int rc; int expect_rxack; - + bool has_errata_A004447; }; struct mpc_i2c_divider { @@ -136,6 +138,75 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c) } } +static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) +{ + void __iomem *addr = i2c->base + MPC_I2C_SR; + u8 val; + + return readb_poll_timeout(addr, val, val & mask, 0, 100); +} + +/* + * Workaround for Erratum A004447. From the P2040CE Rev Q + * + * 1. Set up the frequency divider and sampling rate. + * 2. I2CCR - a0h + * 3. Poll for I2CSR[MBB] to get set. + * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to + * step 5. If MAL is not set, then go to step 13. + * 5. I2CCR - 00h + * 6. I2CCR - 22h + * 7. I2CCR - a2h + * 8. Poll for I2CSR[MBB] to get set. + * 9. Issue read to I2CDR. + * 10. Poll for I2CSR[MIF] to be set. + * 11. I2CCR - 82h + * 12. Workaround complete. Skip the next steps. + * 13. Issue read to I2CDR. + * 14. Poll for I2CSR[MIF] to be set. + * 15. I2CCR - 80h + */ +static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) +{ + int ret; + u32 val; + + writeccr(i2c, CCR_MEN | CCR_MSTA); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + + val = readb(i2c->base + MPC_I2C_SR); + + if (val & CSR_MAL) { + writeccr(i2c, 0x00); + writeccr(i2c, CCR_MSTA | CCR_RSVD); + writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN | CCR_RSVD); + } else { + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN); + } +} + #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, @@ -670,7 +741,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) { struct mpc_i2c *i2c = i2c_get_adapdata(adap); - mpc_i2c_fixup(i2c); + if (i2c->has_errata_A004447) + mpc_i2c_fixup_A004447(i2c); + else + mpc_i2c_fixup(i2c); return 0; } @@ -767,6 +841,9 @@ static int fsl_i2c_probe(struct platform_device *op) } dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); + if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) + i2c->has_errata_A004447 = true; + i2c->adap = mpc_ops; scnprintf(i2c->adap.name, sizeof(i2c->adap.name), "MPC adapter (%s)", of_node_full_name(op->dev.of_node)); diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 5ddfa4e56ee2..4e9fb6b44436 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -479,6 +479,11 @@ static void mtk_i2c_clock_disable(struct mtk_i2c *i2c) static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; + u16 intr_stat_reg; + + mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START); + intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT); + mtk_i2c_writew(i2c, intr_stat_reg, OFFSET_INTR_STAT); if (i2c->dev_comp->apdma_sync) { writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index dc77e1c4e80f..a2d12a5b1c34 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -159,7 +159,7 @@ struct i2c_nmk_client { * @clk_freq: clock frequency for the operation mode * @tft: Tx FIFO Threshold in bytes * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout (ms) + * @timeout: Slave response timeout (ms) * @sm: speed mode * @stop: stop condition. * @xfer_complete: acknowledge completion for a I2C message. diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 273222e38056..a0af027db04c 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -250,7 +250,7 @@ static irqreturn_t ocores_isr(int irq, void *dev_id) } /** - * Process timeout event + * ocores_process_timeout() - Process timeout event * @i2c: ocores I2C device instance */ static void ocores_process_timeout(struct ocores_i2c *i2c) @@ -264,7 +264,7 @@ static void ocores_process_timeout(struct ocores_i2c *i2c) } /** - * Wait until something change in a given register + * ocores_wait() - Wait until something change in a given register * @i2c: ocores I2C device instance * @reg: register to query * @mask: bitmask to apply on register value @@ -296,7 +296,7 @@ static int ocores_wait(struct ocores_i2c *i2c, } /** - * Wait until is possible to process some data + * ocores_poll_wait() - Wait until is possible to process some data * @i2c: ocores I2C device instance * * Used when the device is in polling mode (interrupts disabled). @@ -334,7 +334,7 @@ static int ocores_poll_wait(struct ocores_i2c *i2c) } /** - * It handles an IRQ-less transfer + * ocores_process_polling() - It handles an IRQ-less transfer * @i2c: ocores I2C device instance * * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 8c4ec7f13f5a..50f21cdbe90d 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -138,7 +138,7 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) /** * i2c_pnx_start - start a device * @slave_addr: slave address - * @adap: pointer to adapter structure + * @alg_data: pointer to local driver data structure * * Generate a START signal in the desired mode. */ @@ -194,7 +194,7 @@ static int i2c_pnx_start(unsigned char slave_addr, /** * i2c_pnx_stop - stop a device - * @adap: pointer to I2C adapter structure + * @alg_data: pointer to local driver data structure * * Generate a STOP signal to terminate the master transaction. */ @@ -223,7 +223,7 @@ static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data) /** * i2c_pnx_master_xmit - transmit data to slave - * @adap: pointer to I2C adapter structure + * @alg_data: pointer to local driver data structure * * Sends one byte of data to the slave */ @@ -293,7 +293,7 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data) /** * i2c_pnx_master_rcv - receive data from slave - * @adap: pointer to I2C adapter structure + * @alg_data: pointer to local driver data structure * * Reads one byte data from the slave */ diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 214b4c913a13..07b710a774df 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -100,7 +100,7 @@ static const struct geni_i2c_err_log gi2c_log[] = { [GP_IRQ0] = {-EIO, "Unknown I2C err GP_IRQ0"}, [NACK] = {-ENXIO, "NACK: slv unresponsive, check its power/reset-ln"}, [GP_IRQ2] = {-EIO, "Unknown I2C err GP IRQ2"}, - [BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unepxected start/stop"}, + [BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unexpected start/stop"}, [ARB_LOST] = {-EAGAIN, "Bus arbitration lost, clock line undriveable"}, [GP_IRQ5] = {-EIO, "Unknown I2C err GP IRQ5"}, [GENI_OVERRUN] = {-EIO, "Cmd overrun, check GENI cmd-state machine"}, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index ab928613afba..4d82761e1585 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -480,7 +480,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * forces us to send a new START * when we change direction */ + dev_dbg(i2c->dev, + "missing START before write->read\n"); s3c24xx_i2c_stop(i2c, -EINVAL); + break; } goto retry_write; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 3ae6ca21a02c..2d2e630fd438 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -807,7 +807,7 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = { static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config }, - { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config }, diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index faa81a95551f..88482316d22a 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -524,7 +524,7 @@ static void st_i2c_handle_write(struct st_i2c_dev *i2c_dev) } /** - * st_i2c_handle_write() - Handle FIFO enmpty interrupt in case of read + * st_i2c_handle_read() - Handle FIFO empty interrupt in case of read * @i2c_dev: Controller's private data */ static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev) @@ -558,7 +558,7 @@ static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev) } /** - * st_i2c_isr() - Interrupt routine + * st_i2c_isr_thread() - Interrupt routine * @irq: interrupt number * @data: Controller's private data */ diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index 4933fc8ce3fd..eebce7ecef25 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -313,7 +313,7 @@ static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev) } /** - * stm32f4_i2c_write_ byte() - Write a byte in the data register + * stm32f4_i2c_write_byte() - Write a byte in the data register * @i2c_dev: Controller's private data * @byte: Data to write in the register */ diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 6dc88902c189..1c78657631f4 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -34,7 +34,7 @@ struct i2c_arbitrator_data { }; -/** +/* * i2c_arbitrator_select - claim the I2C bus * * Use the GPIO-based signalling protocol; return -EBUSY if we fail. @@ -77,7 +77,7 @@ static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan) return -EBUSY; } -/** +/* * i2c_arbitrator_deselect - release the I2C bus * * Release the I2C bus using the GPIO-based signalling protocol. |