diff options
-rw-r--r-- | drivers/hwmon/adt7411.c | 48 |
1 files changed, 44 insertions, 4 deletions
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index a7f886961830..fc1e65a263a4 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -30,6 +30,7 @@ #define ADT7411_REG_CFG1 0x18 #define ADT7411_CFG1_START_MONITOR (1 << 0) +#define ADT7411_CFG1_RESERVED_BIT1 (1 << 1) #define ADT7411_CFG1_RESERVED_BIT3 (1 << 3) #define ADT7411_REG_CFG2 0x19 @@ -37,6 +38,9 @@ #define ADT7411_REG_CFG3 0x1a #define ADT7411_CFG3_ADC_CLK_225 (1 << 0) +#define ADT7411_CFG3_RESERVED_BIT1 (1 << 1) +#define ADT7411_CFG3_RESERVED_BIT2 (1 << 2) +#define ADT7411_CFG3_RESERVED_BIT3 (1 << 3) #define ADT7411_CFG3_REF_VDD (1 << 4) #define ADT7411_REG_DEVICE_ID 0x4d @@ -280,6 +284,45 @@ static int adt7411_detect(struct i2c_client *client, return 0; } +static int adt7411_init_device(struct adt7411_data *data) +{ + int ret; + u8 val; + + ret = i2c_smbus_read_byte_data(data->client, ADT7411_REG_CFG3); + if (ret < 0) + return ret; + + /* + * We must only write zero to bit 1 and bit 2 and only one to bit 3 + * according to the datasheet. + */ + val = ret; + val &= ~(ADT7411_CFG3_RESERVED_BIT1 | ADT7411_CFG3_RESERVED_BIT2); + val |= ADT7411_CFG3_RESERVED_BIT3; + + ret = i2c_smbus_write_byte_data(data->client, ADT7411_REG_CFG3, val); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(data->client, ADT7411_REG_CFG1); + if (ret < 0) + return ret; + + /* + * We must only write zero to bit 1 and only one to bit 3 according to + * the datasheet. + */ + val = ret; + val &= ~ADT7411_CFG1_RESERVED_BIT1; + val |= ADT7411_CFG1_RESERVED_BIT3; + + /* enable monitoring */ + val |= ADT7411_CFG1_START_MONITOR; + + return i2c_smbus_write_byte_data(data->client, ADT7411_REG_CFG1, val); +} + static int adt7411_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -297,10 +340,7 @@ static int adt7411_probe(struct i2c_client *client, mutex_init(&data->device_lock); mutex_init(&data->update_lock); - /* According to the datasheet, we must only write 1 to bit 3 */ - ret = adt7411_modify_bit(client, ADT7411_REG_CFG1, - ADT7411_CFG1_RESERVED_BIT3 - | ADT7411_CFG1_START_MONITOR, 1); + ret = adt7411_init_device(data); if (ret < 0) return ret; |