diff options
-rw-r--r-- | Documentation/driver-api/miscellaneous.rst | 5 | ||||
-rw-r--r-- | drivers/tty/n_gsm.c | 71 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_lpss.c | 17 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 52 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 7 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 76 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 1 |
7 files changed, 138 insertions, 91 deletions
diff --git a/Documentation/driver-api/miscellaneous.rst b/Documentation/driver-api/miscellaneous.rst index 304ffb146cf9..4a5104a368ac 100644 --- a/Documentation/driver-api/miscellaneous.rst +++ b/Documentation/driver-api/miscellaneous.rst @@ -16,12 +16,11 @@ Parallel Port Devices 16x50 UART Driver ================= -.. kernel-doc:: drivers/tty/serial/serial_core.c - :export: - .. kernel-doc:: drivers/tty/serial/8250/8250_core.c :export: +See serial/driver.rst for related APIs. + Pulse-Width Modulation (PWM) ============================ diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 5e516f5cac5a..b6e0cc4571ea 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -264,7 +264,7 @@ struct gsm_mux { bool constipated; /* Asked by remote to shut up */ bool has_devices; /* Devices were registered */ - struct mutex tx_mutex; + spinlock_t tx_lock; unsigned int tx_bytes; /* TX data outstanding */ #define TX_THRESH_HI 8192 #define TX_THRESH_LO 2048 @@ -272,7 +272,7 @@ struct gsm_mux { struct list_head tx_data_list; /* Pending data packets */ /* Control messages */ - struct delayed_work kick_timeout; /* Kick TX queuing on timeout */ + struct timer_list kick_timer; /* Kick TX queuing on timeout */ struct timer_list t2_timer; /* Retransmit timer for commands */ int cretries; /* Command retry counter */ struct gsm_control *pending_cmd;/* Our current pending command */ @@ -700,6 +700,7 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) struct gsm_msg *msg; u8 *dp; int ocr; + unsigned long flags; msg = gsm_data_alloc(gsm, addr, 0, control); if (!msg) @@ -721,10 +722,10 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) gsm_print_packet("Q->", addr, cr, control, NULL, 0); - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); list_add_tail(&msg->list, &gsm->tx_ctrl_list); gsm->tx_bytes += msg->len; - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); gsmld_write_trigger(gsm); return 0; @@ -749,7 +750,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci) spin_unlock_irqrestore(&dlci->lock, flags); /* Clear data packets in MUX write queue */ - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) { if (msg->addr != addr) continue; @@ -757,7 +758,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci) list_del(&msg->list); kfree(msg); } - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); } /** @@ -1028,7 +1029,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) gsm->tx_bytes += msg->len; gsmld_write_trigger(gsm); - schedule_delayed_work(&gsm->kick_timeout, 10 * gsm->t1 * HZ / 100); + mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100); } /** @@ -1043,9 +1044,10 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) { - mutex_lock(&dlci->gsm->tx_mutex); + unsigned long flags; + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); __gsm_data_queue(dlci, msg); - mutex_unlock(&dlci->gsm->tx_mutex); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); } /** @@ -1057,7 +1059,7 @@ static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) * is data. Keep to the MRU of the mux. This path handles the usual tty * interface which is a byte stream with optional modem data. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) @@ -1117,7 +1119,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) * is data. Keep to the MRU of the mux. This path handles framed data * queued as skbuffs to the DLCI. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, @@ -1133,7 +1135,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, if (dlci->adaption == 4) overhead = 1; - /* dlci->skb is locked by tx_mutex */ + /* dlci->skb is locked by tx_lock */ if (dlci->skb == NULL) { dlci->skb = skb_dequeue_tail(&dlci->skb_list); if (dlci->skb == NULL) @@ -1187,7 +1189,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, * Push an empty frame in to the transmit queue to update the modem status * bits and to transmit an optional break. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */ static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci, @@ -1301,12 +1303,13 @@ static int gsm_dlci_data_sweep(struct gsm_mux *gsm) static void gsm_dlci_data_kick(struct gsm_dlci *dlci) { + unsigned long flags; int sweep; if (dlci->constipated) return; - mutex_lock(&dlci->gsm->tx_mutex); + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); /* If we have nothing running then we need to fire up */ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO); if (dlci->gsm->tx_bytes == 0) { @@ -1317,7 +1320,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) } if (sweep) gsm_dlci_data_sweep(dlci->gsm); - mutex_unlock(&dlci->gsm->tx_mutex); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); } /* @@ -1708,7 +1711,7 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm, unsigned int command, u8 *data, int clen) { struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control), - GFP_KERNEL); + GFP_ATOMIC); unsigned long flags; if (ctrl == NULL) return NULL; @@ -2019,23 +2022,24 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) } /** - * gsm_kick_timeout - transmit if possible - * @work: work contained in our gsm object + * gsm_kick_timer - transmit if possible + * @t: timer contained in our gsm object * * Transmit data from DLCIs if the queue is empty. We can't rely on * a tty wakeup except when we filled the pipe so we need to fire off * new data ourselves in other cases. */ -static void gsm_kick_timeout(struct work_struct *work) +static void gsm_kick_timer(struct timer_list *t) { - struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work); + struct gsm_mux *gsm = from_timer(gsm, t, kick_timer); + unsigned long flags; int sent = 0; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); /* If we have nothing running then we need to fire up */ if (gsm->tx_bytes < TX_THRESH_LO) sent = gsm_dlci_data_sweep(gsm); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); if (sent && debug & DBG_DATA) pr_info("%s TX queue stalled\n", __func__); @@ -2492,7 +2496,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc) } /* Finish outstanding timers, making sure they are done */ - cancel_delayed_work_sync(&gsm->kick_timeout); + del_timer_sync(&gsm->kick_timer); del_timer_sync(&gsm->t2_timer); /* Finish writing to ldisc */ @@ -2565,7 +2569,6 @@ static void gsm_free_mux(struct gsm_mux *gsm) break; } } - mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2637,15 +2640,15 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_lock_init(&gsm->lock); mutex_init(&gsm->mutex); - mutex_init(&gsm->tx_mutex); kref_init(&gsm->ref); INIT_LIST_HEAD(&gsm->tx_ctrl_list); INIT_LIST_HEAD(&gsm->tx_data_list); - INIT_DELAYED_WORK(&gsm->kick_timeout, gsm_kick_timeout); + timer_setup(&gsm->kick_timer, gsm_kick_timer, 0); timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); INIT_WORK(&gsm->tx_work, gsmld_write_task); init_waitqueue_head(&gsm->event); spin_lock_init(&gsm->control_lock); + spin_lock_init(&gsm->tx_lock); gsm->t1 = T1; gsm->t2 = T2; @@ -2670,7 +2673,6 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_unlock(&gsm_mux_lock); if (i == MAX_MUX) { - mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2826,16 +2828,17 @@ static void gsmld_write_trigger(struct gsm_mux *gsm) static void gsmld_write_task(struct work_struct *work) { struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work); + unsigned long flags; int i, ret; /* All outstanding control channel and control messages and one data * frame is sent. */ ret = -ENODEV; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); if (gsm->tty) ret = gsm_data_kick(gsm); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); if (ret >= 0) for (i = 0; i < NUM_DLCI; i++) @@ -3042,6 +3045,7 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr) { struct gsm_mux *gsm = tty->disc_data; + unsigned long flags; int space; int ret; @@ -3049,13 +3053,13 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, return -ENODEV; ret = -ENOBUFS; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); space = tty_write_room(tty); if (space >= nr) ret = tty->ops->write(tty, buf, nr); else set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); return ret; } @@ -3352,13 +3356,14 @@ static struct tty_ldisc_ops tty_ldisc_packet = { static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk) { struct gsm_mux *gsm = dlci->gsm; + unsigned long flags; if (dlci->state != DLCI_OPEN || dlci->adaption != 2) return; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); gsm_dlci_modem_output(gsm, dlci, brk); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); } /** diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 44cc755b1a29..0e43bdfb7459 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -174,6 +174,8 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) */ up->dma = dma; + lpss->dma_maxburst = 16; + port->set_termios = dw8250_do_set_termios; return 0; @@ -277,8 +279,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port struct dw_dma_slave *rx_param, *tx_param; struct device *dev = port->port.dev; - if (!lpss->dma_param.dma_dev) + if (!lpss->dma_param.dma_dev) { + dma = port->dma; + if (dma) + goto out_configuration_only; + return 0; + } rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); if (!rx_param) @@ -289,16 +296,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port return -ENOMEM; *rx_param = lpss->dma_param; - dma->rxconf.src_maxburst = lpss->dma_maxburst; - *tx_param = lpss->dma_param; - dma->txconf.dst_maxburst = lpss->dma_maxburst; dma->fn = lpss8250_dma_filter; dma->rx_param = rx_param; dma->tx_param = tx_param; port->dma = dma; + +out_configuration_only: + dma->rxconf.src_maxburst = lpss->dma_maxburst; + dma->txconf.dst_maxburst = lpss->dma_maxburst; + return 0; } diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 41b8c6b27136..3f33014022f0 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -157,7 +157,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg) return readl(up->port.membase + (reg << up->port.regshift)); } -static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +/* + * Called on runtime PM resume path from omap8250_restore_regs(), and + * omap8250_set_mctrl(). + */ +static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = up->port.private_data; @@ -181,6 +185,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) } } +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + int err; + + err = pm_runtime_resume_and_get(port->dev); + if (err) + return; + + __omap8250_set_mctrl(port, mctrl); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + /* * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) * The access to uart register after MDR1 Access @@ -193,27 +211,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { - u8 timeout = 255; - serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2); serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); - /* - * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and - * TX_FIFO_E bit is 1. - */ - while (UART_LSR_THRE != (serial_in(up, UART_LSR) & - (UART_LSR_THRE | UART_LSR_DR))) { - timeout--; - if (!timeout) { - /* Should *never* happen. we warn and carry on */ - dev_crit(up->port.dev, "Errata i202: timedout %x\n", - serial_in(up, UART_LSR)); - break; - } - udelay(1); - } } static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud, @@ -292,6 +293,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up); if (dma && dma->tx_running) { /* @@ -308,7 +310,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr); omap8250_update_scr(up, priv); @@ -324,7 +326,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0); /* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -341,7 +344,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) omap8250_update_mdr1(up, priv); - up->port.ops->set_mctrl(&up->port, up->port.mctrl); + __omap8250_set_mctrl(&up->port, up->port.mctrl); if (up->port.rs485.flags & SER_RS485_ENABLED) serial8250_em485_stop_tx(up); @@ -669,7 +672,6 @@ static int omap_8250_startup(struct uart_port *port) pm_runtime_get_sync(port->dev); - up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_out(up, UART_LCR, UART_LCR_WLEN8); @@ -1458,9 +1460,15 @@ err: static int omap8250_remove(struct platform_device *pdev) { struct omap8250_priv *priv = platform_get_drvdata(pdev); + int err; + + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) + return err; pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); serial8250_unregister_port(priv->line); cpu_latency_qos_remove_request(&priv->pm_qos_request); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fe8662cd9402..388172289627 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1897,10 +1897,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status); static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) { switch (iir & 0x3f) { - case UART_IIR_RX_TIMEOUT: - serial8250_rx_dma_flush(up); + case UART_IIR_RDI: + if (!up->dma->rx_running) + break; fallthrough; case UART_IIR_RLSI: + case UART_IIR_RX_TIMEOUT: + serial8250_rx_dma_flush(up); return true; } return up->dma->rx_dma(up); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 67fa113f77d4..888e01fbd9c5 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -12,6 +12,7 @@ #include <linux/dmaengine.h> #include <linux/dmapool.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/of.h> @@ -404,33 +405,6 @@ static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport) #define lpuart_enable_clks(x) __lpuart_enable_clks(x, true) #define lpuart_disable_clks(x) __lpuart_enable_clks(x, false) -static int lpuart_global_reset(struct lpuart_port *sport) -{ - struct uart_port *port = &sport->port; - void __iomem *global_addr; - int ret; - - if (uart_console(port)) - return 0; - - ret = clk_prepare_enable(sport->ipg_clk); - if (ret) { - dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret); - return ret; - } - - if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) { - global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF; - writel(UART_GLOBAL_RST, global_addr); - usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); - writel(0, global_addr); - usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); - } - - clk_disable_unprepare(sport->ipg_clk); - return 0; -} - static void lpuart_stop_tx(struct uart_port *port) { unsigned char temp; @@ -2636,6 +2610,54 @@ static const struct serial_rs485 lpuart_rs485_supported = { /* delay_rts_* and RX_DURING_TX are not supported */ }; +static int lpuart_global_reset(struct lpuart_port *sport) +{ + struct uart_port *port = &sport->port; + void __iomem *global_addr; + unsigned long ctrl, bd; + unsigned int val = 0; + int ret; + + ret = clk_prepare_enable(sport->ipg_clk); + if (ret) { + dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret); + return ret; + } + + if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) { + /* + * If the transmitter is used by earlycon, wait for transmit engine to + * complete and then reset. + */ + ctrl = lpuart32_read(port, UARTCTRL); + if (ctrl & UARTCTRL_TE) { + bd = lpuart32_read(&sport->port, UARTBAUD); + if (read_poll_timeout(lpuart32_tx_empty, val, val, 1, 100000, false, + port)) { + dev_warn(sport->port.dev, + "timeout waiting for transmit engine to complete\n"); + clk_disable_unprepare(sport->ipg_clk); + return 0; + } + } + + global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF; + writel(UART_GLOBAL_RST, global_addr); + usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); + writel(0, global_addr); + usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US); + + /* Recover the transmitter for earlycon. */ + if (ctrl & UARTCTRL_TE) { + lpuart32_write(port, bd, UARTBAUD); + lpuart32_write(port, ctrl, UARTCTRL); + } + } + + clk_disable_unprepare(sport->ipg_clk); + return 0; +} + static int lpuart_probe(struct platform_device *pdev) { const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 05b432dc7a85..aadda66405b4 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2594,6 +2594,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { .suspend_noirq = imx_uart_suspend_noirq, .resume_noirq = imx_uart_resume_noirq, .freeze_noirq = imx_uart_suspend_noirq, + .thaw_noirq = imx_uart_resume_noirq, .restore_noirq = imx_uart_resume_noirq, .suspend = imx_uart_suspend, .resume = imx_uart_resume, |