diff options
| -rw-r--r-- | Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 9 | ||||
| -rw-r--r-- | drivers/net/can/mscan/mpc52xx_can.c | 3 |
2 files changed, 6 insertions, 6 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt index b151fb1ddef0..cabc780f7258 100644 --- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -181,9 +181,10 @@ External interrupts: fsl,mpc5200-mscan nodes ----------------------- In addition to the required compatible-, reg- and interrupt-properites, you can -also specify which clock shall be used for the bus: +also specify which clock source shall be used for the controller: -- fsl,mscan-clk-src - a string describing the clock source. Valid values - are "ip" for IP_CLK and "sys" for SYS_XTAL. - "sys" is the default in case the property is not +- fsl,mscan-clock-source- a string describing the clock source. Valid values + are: "ip" for ip bus clock + "ref" for reference clock (XTAL) + "ref" is default in case this property is not present. diff --git a/drivers/net/can/mscan/mpc52xx_can.c b/drivers/net/can/mscan/mpc52xx_can.c index a915959b6b36..1de6f6349b16 100644 --- a/drivers/net/can/mscan/mpc52xx_can.c +++ b/drivers/net/can/mscan/mpc52xx_can.c @@ -130,7 +130,7 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev, * choice as it has less jitter. For this reason, it is selected * by default. */ - clk_src = of_get_property(np, "fsl,mscan-clk-src", NULL); + clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL); if (clk_src && strcmp(clk_src, "ip") == 0) clock_src = MSCAN_CLKSRC_BUS; else @@ -227,7 +227,6 @@ static int mpc5xxx_can_resume(struct of_device *ofdev) static struct of_device_id __devinitdata mpc5xxx_can_table[] = { {.compatible = "fsl,mpc5200-mscan"}, - {.compatible = "fsl,mpc5200b-mscan"}, {}, }; |