diff options
67 files changed, 2310 insertions, 1099 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 46b26bfee27b..281c85839c17 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -223,7 +223,7 @@ acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, nonvs, sci_force_enable } + old_ordering, nonvs, sci_force_enable, nobl } See Documentation/power/video.txt for information on s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep @@ -239,6 +239,9 @@ sci_force_enable causes the kernel to set SCI_EN directly on resume from S1/S3 (which is against the ACPI spec, but some broken systems don't work without it). + nobl causes the internal blacklist of systems known to + behave incorrectly in some ways with respect to system + suspend and resume to be ignored (use wisely). acpi_use_timer_override [HW,ACPI] Use timer override. For some broken Nvidia NF5 boards diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt index 51336e5fc761..35c3c3460d17 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt @@ -14,3 +14,22 @@ following property before the previous one: Example: compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + +Power management +---------------- + +For power management (particularly DVFS and AVS), the North Bridge +Power Management component is needed: + +Required properties: +- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; +- reg : the register start and length for the North Bridge + Power Management + +Example: + +nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", "syscon"; + reg = <0x14000 0x60>; +} diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9d733af26be7..4e4f30288c8b 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,6 +45,11 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device. +This can contain more than one phandle for power domain providers that provide +multiple power domains. That is, one phandle for each power domain. If only one +phandle is available, then the same OPP table will be used for all power domains +provided by the power domain provider. + If required, this can be extended for SoC vendor specific bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>". @@ -154,6 +159,14 @@ Optional properties: - status: Marks the node enabled/disabled. +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. / { diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt new file mode 100644 index 000000000000..832346e489a3 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -0,0 +1,63 @@ +Texas Instruments OMAP compatible OPP supply description + +OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which +contain data that can be used to adjust voltages programmed for some of their +supplies for more efficient operation. This binding provides the information +needed to read these values and use them to program the main regulator during +an OPP transitions. + +Also, some supplies may have an associated vbb-supply which is an Adaptive Body +Bias regulator which much be transitioned in a specific sequence with regards +to the vdd-supply and clk when making an OPP transition. By supplying two +regulators to the device that will undergo OPP transitions we can make use +of the multi regulator binding that is part of the OPP core described here [1] +to describe both regulators needed by the platform. + +[1] Documentation/devicetree/bindings/opp/opp.txt + +Required Properties for Device Node: +- vdd-supply: phandle to regulator controlling VDD supply +- vbb-supply: phandle to regulator controlling Body Bias supply + (Usually Adaptive Body Bias regulator) + +Required Properties for opp-supply node: +- compatible: Should be one of: + "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB + "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD + along with VBB + "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD + but no VBB. +- reg: Address and length of the efuse register set for the device (mandatory + only for "ti,omap5-opp-supply") +- ti,efuse-settings: An array of u32 tuple items providing information about + optimized efuse configuration. Each item consists of the following: + volt: voltage in uV - reference voltage (OPP voltage) + efuse_offseet: efuse offset from reg where the optimized voltage is stored. +- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. + +Example: + +/* Device Node (CPU) */ +cpus { + cpu0: cpu@0 { + device_type = "cpu"; + + ... + + vdd-supply = <&vcc>; + vbb-supply = <&abb_mpu>; + }; +}; + +/* OMAP OPP Supply with Class0 registers */ +opp_supply_mpu: opp_supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; +}; diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 14bd9e945ff6..f3355313c020 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -40,6 +40,12 @@ Optional properties: domain's idle states. In the absence of this property, the domain would be considered as capable of being powered-on or powered-off. +- operating-points-v2 : Phandles to the OPP tables of power domains provided by + a power domain provider. If the provider provides a single power domain only + or all the power domains provided by the provider have identical OPP tables, + then this shall contain a single phandle. Refer to ../opp/opp.txt for more + information. + Example: power: power-controller@12340000 { @@ -120,4 +126,63 @@ The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". +Optional properties: +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + +Example: +- OPP table for domain provider that provides two domains. + + domain0_opp_table: opp-table0 { + compatible = "operating-points-v2"; + + domain0_opp_0: opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain0_opp_1: opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + domain1_opp_table: opp-table1 { + compatible = "operating-points-v2"; + + domain1_opp_0: opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain1_opp_1: opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + power: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>; + }; + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 0>; + required-opp = <&domain0_opp_0>; + }; + + leaky-device1@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 1>; + required-opp = <&domain1_opp_1>; + }; + [1]. Documentation/devicetree/bindings/power/domain-idle-state.txt diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index 53c1b0b06da5..1128705a5731 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -777,17 +777,51 @@ The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in runtime suspend at the beginning of the ``suspend_late`` phase of system-wide suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM has been disabled for it, under the assumption that its state should not change -after that point until the system-wide transition is over. If that happens, the -driver's system-wide resume callbacks, if present, may still be invoked during -the subsequent system-wide resume transition and the device's runtime power -management status may be set to "active" before enabling runtime PM for it, -so the driver must be prepared to cope with the invocation of its system-wide -resume callbacks back-to-back with its ``->runtime_suspend`` one (without the -intervening ``->runtime_resume`` and so on) and the final state of the device -must reflect the "active" status for runtime PM in that case. +after that point until the system-wide transition is over (the PM core itself +does that for devices whose "noirq", "late" and "early" system-wide PM callbacks +are executed directly by it). If that happens, the driver's system-wide resume +callbacks, if present, may still be invoked during the subsequent system-wide +resume transition and the device's runtime power management status may be set +to "active" before enabling runtime PM for it, so the driver must be prepared to +cope with the invocation of its system-wide resume callbacks back-to-back with +its ``->runtime_suspend`` one (without the intervening ``->runtime_resume`` and +so on) and the final state of the device must reflect the "active" runtime PM +status in that case. During system-wide resume from a sleep state it's easiest to put devices into the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`. -Refer to that document for more information regarding this particular issue as +[Refer to that document for more information regarding this particular issue as well as for information on the device runtime power management framework in -general. +general.] + +However, it often is desirable to leave devices in suspend after system +transitions to the working state, especially if those devices had been in +runtime suspend before the preceding system-wide suspend (or analogous) +transition. Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to +indicate to the PM core (and middle-layer code) that they prefer the specific +devices handled by them to be left suspended and they have no problems with +skipping their system-wide resume callbacks for this reason. Whether or not the +devices will actually be left in suspend may depend on their state before the +given system suspend-resume cycle and on the type of the system transition under +way. In particular, devices are not left suspended if that transition is a +restore from hibernation, as device states are not guaranteed to be reflected +by the information stored in the hibernation image in that case. + +The middle-layer code involved in the handling of the device is expected to +indicate to the PM core if the device may be left in suspend by setting its +:c:member:`power.may_skip_resume` status bit which is checked by the PM core +during the "noirq" phase of the preceding system-wide suspend (or analogous) +transition. The middle layer is then responsible for handling the device as +appropriate in its "noirq" resume callback, which is executed regardless of +whether or not the device is left suspended, but the other resume callbacks +(except for ``->complete``) will be skipped automatically by the PM core if the +device really can be left in suspend. + +For devices whose "noirq", "late" and "early" driver callbacks are invoked +directly by the PM core, all of the system-wide resume callbacks are skipped if +``DPM_FLAG_LEAVE_SUSPENDED`` is set and the device is in runtime suspend during +the ``suspend_noirq`` (or analogous) phase or the transition under way is a +proper system suspend (rather than anything related to hibernation) and the +device's wakeup settings are suitable for runtime PM (that is, it cannot +generate wakeup signals at all or it is allowed to wake up the system from +sleep). diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index 704cd36079b8..8eaf9ee24d43 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -994,6 +994,17 @@ into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(), the function will set the power.direct_complete flag for it (to make the PM core skip the subsequent "thaw" callbacks for it) and return. +Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the +device to be left in suspend after system-wide transitions to the working state. +This flag is checked by the PM core, but the PCI bus type informs the PM core +which devices may be left in suspend from its perspective (that happens during +the "noirq" phase of system-wide suspend and analogous transitions) and next it +uses the dev_pm_may_skip_resume() helper to decide whether or not to return from +pci_pm_resume_noirq() early, as the PM core will skip the remaining resume +callbacks for the device during the transition under way and will set its +runtime PM status to "suspended" if dev_pm_may_skip_resume() returns "true" for +it. + 3.2. Device Runtime Power Management ------------------------------------ In addition to providing device power management callbacks PCI device drivers diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt index 71653584cd03..7df567eaea1a 100644 --- a/Documentation/thermal/cpu-cooling-api.txt +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -26,39 +26,16 @@ the user. The registration APIs returns the cooling device pointer. clip_cpus: cpumask of cpus where the frequency constraints will happen. 1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register( - struct device_node *np, const struct cpumask *clip_cpus) + struct cpufreq_policy *policy) This interface function registers the cpufreq cooling device with the name "thermal-cpufreq-%x" linking it with a device tree node, in order to bind it via the thermal DT code. This api can support multiple instances of cpufreq cooling devices. - np: pointer to the cooling device device tree node - clip_cpus: cpumask of cpus where the frequency constraints will happen. + policy: CPUFreq policy. -1.1.3 struct thermal_cooling_device *cpufreq_power_cooling_register( - const struct cpumask *clip_cpus, u32 capacitance, - get_static_t plat_static_func) - -Similar to cpufreq_cooling_register, this function registers a cpufreq -cooling device. Using this function, the cooling device will -implement the power extensions by using a simple cpu power model. The -cpus must have registered their OPPs using the OPP library. - -The additional parameters are needed for the power model (See 2. Power -models). "capacitance" is the dynamic power coefficient (See 2.1 -Dynamic power). "plat_static_func" is a function to calculate the -static power consumed by these cpus (See 2.2 Static power). - -1.1.4 struct thermal_cooling_device *of_cpufreq_power_cooling_register( - struct device_node *np, const struct cpumask *clip_cpus, u32 capacitance, - get_static_t plat_static_func) - -Similar to cpufreq_power_cooling_register, this function register a -cpufreq cooling device with power extensions using the device tree -information supplied by the np parameter. - -1.1.5 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) +1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) This interface function unregisters the "thermal-cpufreq-%x" cooling device. @@ -67,20 +44,14 @@ information supplied by the np parameter. 2. Power models The power API registration functions provide a simple power model for -CPUs. The current power is calculated as dynamic + (optionally) -static power. This power model requires that the operating-points of +CPUs. The current power is calculated as dynamic power (static power isn't +supported currently). This power model requires that the operating-points of the CPUs are registered using the kernel's opp library and the `cpufreq_frequency_table` is assigned to the `struct device` of the cpu. If you are using CONFIG_CPUFREQ_DT then the `cpufreq_frequency_table` should already be assigned to the cpu device. -The `plat_static_func` parameter of `cpufreq_power_cooling_register()` -and `of_cpufreq_power_cooling_register()` is optional. If you don't -provide it, only dynamic power will be considered. - -2.1 Dynamic power - The dynamic power consumption of a processor depends on many factors. For a given processor implementation the primary factors are: @@ -119,79 +90,3 @@ mW/MHz/uVolt^2. Typical values for mobile CPUs might lie in range from 100 to 500. For reference, the approximate values for the SoC in ARM's Juno Development Platform are 530 for the Cortex-A57 cluster and 140 for the Cortex-A53 cluster. - - -2.2 Static power - -Static leakage power consumption depends on a number of factors. For a -given circuit implementation the primary factors are: - -- Time the circuit spends in each 'power state' -- Temperature -- Operating voltage -- Process grade - -The time the circuit spends in each 'power state' for a given -evaluation period at first order means OFF or ON. However, -'retention' states can also be supported that reduce power during -inactive periods without loss of context. - -Note: The visibility of state entries to the OS can vary, according to -platform specifics, and this can then impact the accuracy of a model -based on OS state information alone. It might be possible in some -cases to extract more accurate information from system resources. - -The temperature, operating voltage and process 'grade' (slow to fast) -of the circuit are all significant factors in static leakage power -consumption. All of these have complex relationships to static power. - -Circuit implementation specific factors include the chosen silicon -process as well as the type, number and size of transistors in both -the logic gates and any RAM elements included. - -The static power consumption modelling must take into account the -power managed regions that are implemented. Taking the example of an -ARM processor cluster, the modelling would take into account whether -each CPU can be powered OFF separately or if only a single power -region is implemented for the complete cluster. - -In one view, there are others, a static power consumption model can -then start from a set of reference values for each power managed -region (e.g. CPU, Cluster/L2) in each state (e.g. ON, OFF) at an -arbitrary process grade, voltage and temperature point. These values -are then scaled for all of the following: the time in each state, the -process grade, the current temperature and the operating voltage. -However, since both implementation specific and complex relationships -dominate the estimate, the appropriate interface to the model from the -cpu cooling device is to provide a function callback that calculates -the static power in this platform. When registering the cpu cooling -device pass a function pointer that follows the `get_static_t` -prototype: - - int plat_get_static(cpumask_t *cpumask, int interval, - unsigned long voltage, u32 &power); - -`cpumask` is the cpumask of the cpus involved in the calculation. -`voltage` is the voltage at which they are operating. The function -should calculate the average static power for the last `interval` -milliseconds. It returns 0 on success, -E* on error. If it -succeeds, it should store the static power in `power`. Reading the -temperature of the cpus described by `cpumask` is left for -plat_get_static() to do as the platform knows best which thermal -sensor is closest to the cpu. - -If `plat_static_func` is NULL, static power is considered to be -negligible for this platform and only dynamic power is considered. - -The platform specific callback can then use any combination of tables -and/or equations to permute the estimated value. Process grade -information is not passed to the model since access to such data, from -on-chip measurement capability or manufacture time data, is platform -specific. - -Note: the significance of static power for CPUs in comparison to -dynamic power is highly dependent on implementation. Given the -potential complexity in implementation, the importance and accuracy of -its inclusion when using cpu cooling devices should be assessed on a -case by case basis. - diff --git a/MAINTAINERS b/MAINTAINERS index 5046003ea162..cf729942f33d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1591,6 +1591,7 @@ F: arch/arm/boot/dts/kirkwood* F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* +F: drivers/cpufreq/armada-37xx-cpufreq.c F: drivers/cpufreq/mvebu-cpufreq.c F: drivers/irqchip/irq-armada-370-xp.c F: drivers/irqchip/irq-mvebu-* @@ -10889,6 +10890,7 @@ F: include/linux/pm.h F: include/linux/pm_* F: include/linux/powercap.h F: drivers/powercap/ +F: kernel/configs/nopm.config POWER STATE COORDINATION INTERFACE (PSCI) M: Mark Rutland <mark.rutland@arm.com> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d5181f85ca9c..963e1698fe1d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -68,12 +68,14 @@ clock-latency = <61036>; /* two CLK32 periods */ operating-points = < /* kHz uV */ + 696000 1275000 528000 1175000 396000 1025000 198000 950000 >; fsl,soc-operating-points = < /* KHz uV */ + 696000 1275000 528000 1175000 396000 1175000 198000 1175000 diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 7188aea91549..f1915b744052 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -138,6 +138,8 @@ static int __init acpi_sleep_setup(char *str) acpi_nvs_nosave_s3(); if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); + if (strncmp(str, "nobl", 4) == 0) + acpi_sleep_no_blacklist(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index a4c8ad98560d..c4d0a1c912f0 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -990,7 +990,7 @@ void acpi_subsys_complete(struct device *dev) * the sleep state it is going out of and it has never been resumed till * now, resume it in case the firmware powered it up. */ - if (dev->power.direct_complete && pm_resume_via_firmware()) + if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) pm_request_resume(dev); } EXPORT_SYMBOL_GPL(acpi_subsys_complete); @@ -1039,10 +1039,28 @@ EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late); */ int acpi_subsys_suspend_noirq(struct device *dev) { - if (dev_pm_smart_suspend_and_suspended(dev)) + int ret; + + if (dev_pm_smart_suspend_and_suspended(dev)) { + dev->power.may_skip_resume = true; return 0; + } + + ret = pm_generic_suspend_noirq(dev); + if (ret) + return ret; + + /* + * If the target system sleep state is suspend-to-idle, it is sufficient + * to check whether or not the device's wakeup settings are good for + * runtime PM. Otherwise, the pm_resume_via_firmware() check will cause + * acpi_subsys_complete() to take care of fixing up the device's state + * anyway, if need be. + */ + dev->power.may_skip_resume = device_may_wakeup(dev) || + !device_can_wakeup(dev); - return pm_generic_suspend_noirq(dev); + return 0; } EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq); @@ -1052,6 +1070,9 @@ EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq); */ int acpi_subsys_resume_noirq(struct device *dev) { + if (dev_pm_may_skip_resume(dev)) + return 0; + /* * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend * during system suspend, so update their runtime PM status to "active" diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 8082871b409a..46cde0912762 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -367,10 +367,20 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { {}, }; +static bool ignore_blacklist; + +void __init acpi_sleep_no_blacklist(void) +{ + ignore_blacklist = true; +} + static void __init acpi_sleep_dmi_check(void) { int year; + if (ignore_blacklist) + return; + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2012) acpi_nvs_nosave_s3(); @@ -697,7 +707,8 @@ static const struct acpi_device_id lps0_device_ids[] = { #define ACPI_LPS0_ENTRY 5 #define ACPI_LPS0_EXIT 6 -#define ACPI_S2IDLE_FUNC_MASK ((1 << ACPI_LPS0_ENTRY) | (1 << ACPI_LPS0_EXIT)) +#define ACPI_LPS0_SCREEN_MASK ((1 << ACPI_LPS0_SCREEN_OFF) | (1 << ACPI_LPS0_SCREEN_ON)) +#define ACPI_LPS0_PLATFORM_MASK ((1 << ACPI_LPS0_ENTRY) | (1 << ACPI_LPS0_EXIT)) static acpi_handle lps0_device_handle; static guid_t lps0_dsm_guid; @@ -900,7 +911,8 @@ static int lps0_device_attach(struct acpi_device *adev, if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) { char bitmask = *(char *)out_obj->buffer.pointer; - if ((bitmask & ACPI_S2IDLE_FUNC_MASK) == ACPI_S2IDLE_FUNC_MASK) { + if ((bitmask & ACPI_LPS0_PLATFORM_MASK) == ACPI_LPS0_PLATFORM_MASK || + (bitmask & ACPI_LPS0_SCREEN_MASK) == ACPI_LPS0_SCREEN_MASK) { lps0_dsm_func_mask = bitmask; lps0_device_handle = adev->handle; /* diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 0c80bea05bcb..528b24149bc7 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -1032,15 +1032,12 @@ static int genpd_prepare(struct device *dev) static int genpd_finish_suspend(struct device *dev, bool poweroff) { struct generic_pm_domain *genpd; - int ret; + int ret = 0; genpd = dev_to_genpd(dev); if (IS_ERR(genpd)) return -EINVAL; - if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd)) - return 0; - if (poweroff) ret = pm_generic_poweroff_noirq(dev); else @@ -1048,10 +1045,19 @@ static int genpd_finish_suspend(struct device *dev, bool poweroff) if (ret) return ret; - if (genpd->dev_ops.stop && genpd->dev_ops.start) { - ret = pm_runtime_force_suspend(dev); - if (ret) + if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd)) + return 0; + + if (genpd->dev_ops.stop && genpd->dev_ops.start && + !pm_runtime_status_suspended(dev)) { + ret = genpd_stop_dev(genpd, dev); + if (ret) { + if (poweroff) + pm_generic_restore_noirq(dev); + else + pm_generic_resume_noirq(dev); return ret; + } } genpd_lock(genpd); @@ -1085,7 +1091,7 @@ static int genpd_suspend_noirq(struct device *dev) static int genpd_resume_noirq(struct device *dev) { struct generic_pm_domain *genpd; - int ret = 0; + int ret; dev_dbg(dev, "%s()\n", __func__); @@ -1094,21 +1100,21 @@ static int genpd_resume_noirq(struct device *dev) return -EINVAL; if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd)) - return 0; + return pm_generic_resume_noirq(dev); genpd_lock(genpd); genpd_sync_power_on(genpd, true, 0); genpd->suspended_count--; genpd_unlock(genpd); - if (genpd->dev_ops.stop && genpd->dev_ops.start) - ret = pm_runtime_force_resume(dev); - - ret = pm_generic_resume_noirq(dev); - if (ret) - return ret; + if (genpd->dev_ops.stop && genpd->dev_ops.start && + !pm_runtime_status_suspended(dev)) { + ret = genpd_start_dev(genpd, dev); + if (ret) + return ret; + } - return ret; + return pm_generic_resume_noirq(dev); } /** @@ -1135,8 +1141,9 @@ static int genpd_freeze_noirq(struct device *dev) if (ret) return ret; - if (genpd->dev_ops.stop && genpd->dev_ops.start) - ret = pm_runtime_force_suspend(dev); + if (genpd->dev_ops.stop && genpd->dev_ops.start && + !pm_runtime_status_suspended(dev)) + ret = genpd_stop_dev(genpd, dev); return ret; } @@ -1159,8 +1166,9 @@ static int genpd_thaw_noirq(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; - if (genpd->dev_ops.stop && genpd->dev_ops.start) { - ret = pm_runtime_force_resume(dev); + if (genpd->dev_ops.stop && genpd->dev_ops.start && + !pm_runtime_status_suspended(dev)) { + ret = genpd_start_dev(genpd, dev); if (ret) return ret; } @@ -1217,8 +1225,9 @@ static int genpd_restore_noirq(struct device *dev) genpd_sync_power_on(genpd, true, 0); genpd_unlock(genpd); - if (genpd->dev_ops.stop && genpd->dev_ops.start) { - ret = pm_runtime_force_resume(dev); + if (genpd->dev_ops.stop && genpd->dev_ops.start && + !pm_runtime_status_suspended(dev)) { + ret = genpd_start_dev(genpd, dev); if (ret) return ret; } @@ -2199,20 +2208,8 @@ int genpd_dev_pm_attach(struct device *dev) ret = of_parse_phandle_with_args(dev->of_node, "power-domains", "#power-domain-cells", 0, &pd_args); - if (ret < 0) { - if (ret != -ENOENT) - return ret; - - /* - * Try legacy Samsung-specific bindings - * (for backwards compatibility of DT ABI) - */ - pd_args.args_count = 0; - pd_args.np = of_parse_phandle(dev->of_node, - "samsung,power-domain", 0); - if (!pd_args.np) - return -ENOENT; - } + if (ret < 0) + return ret; mutex_lock(&gpd_list_lock); pd = genpd_get_from_provider(&pd_args); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 08744b572af6..02a497e7c785 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -18,7 +18,6 @@ */ #include <linux/device.h> -#include <linux/kallsyms.h> #include <linux/export.h> #include <linux/mutex.h> #include <linux/pm.h> @@ -541,6 +540,73 @@ void dev_pm_skip_next_resume_phases(struct device *dev) } /** + * suspend_event - Return a "suspend" message for given "resume" one. + * @resume_msg: PM message representing a system-wide resume transition. + */ +static pm_message_t suspend_event(pm_message_t resume_msg) +{ + switch (resume_msg.event) { + case PM_EVENT_RESUME: + return PMSG_SUSPEND; + case PM_EVENT_THAW: + case PM_EVENT_RESTORE: + return PMSG_FREEZE; + case PM_EVENT_RECOVER: + return PMSG_HIBERNATE; + } + return PMSG_ON; +} + +/** + * dev_pm_may_skip_resume - System-wide device resume optimization check. + * @dev: Target device. + * + * Checks whether or not the device may be left in suspend after a system-wide + * transition to the working state. + */ +bool dev_pm_may_skip_resume(struct device *dev) +{ + return !dev->power.must_resume && pm_transition.event != PM_EVENT_RESTORE; +} + +static pm_callback_t dpm_subsys_resume_noirq_cb(struct device *dev, + pm_message_t state, + const char **info_p) +{ + pm_callback_t callback; + const char *info; + + if (dev->pm_domain) { + info = "noirq power domain "; + callback = pm_noirq_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "noirq type "; + callback = pm_noirq_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "noirq class "; + callback = pm_noirq_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "noirq bus "; + callback = pm_noirq_op(dev->bus->pm, state); + } else { + return NULL; + } + + if (info_p) + *info_p = info; + + return callback; +} + +static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev, + pm_message_t state, + const char **info_p); + +static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev, + pm_message_t state, + const char **info_p); + +/** * device_resume_noirq - Execute a "noirq resume" callback for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. @@ -551,8 +617,9 @@ void dev_pm_skip_next_resume_phases(struct device *dev) */ static int device_resume_noirq(struct device *dev, pm_message_t state, bool async) { - pm_callback_t callback = NULL; - const char *info = NULL; + pm_callback_t callback; + const char *info; + bool skip_resume; int error = 0; TRACE_DEVICE(dev); @@ -566,29 +633,61 @@ static int device_resume_noirq(struct device *dev, pm_message_t state, bool asyn dpm_wait_for_superior(dev, async); - if (dev->pm_domain) { - info = "noirq power domain "; - callback = pm_noirq_op(&dev->pm_domain->ops, state); - } else if (dev->type && dev->type->pm) { - info = "noirq type "; - callback = pm_noirq_op(dev->type->pm, state); - } else if (dev->class && dev->class->pm) { - info = "noirq class "; - callback = pm_noirq_op(dev->class->pm, state); - } else if (dev->bus && dev->bus->pm) { - info = "noirq bus "; - callback = pm_noirq_op(dev->bus->pm, state); + skip_resume = dev_pm_may_skip_resume(dev); + + callback = dpm_subsys_resume_noirq_cb(dev, state, &info); + if (callback) + goto Run; + + if (skip_resume) + goto Skip; + + if (dev_pm_smart_suspend_and_suspended(dev)) { + pm_message_t suspend_msg = suspend_event(state); + + /* + * If "freeze" callbacks have been skipped during a transition + * related to hibernation, the subsequent "thaw" callbacks must + * be skipped too or bad things may happen. Otherwise, resume + * callbacks are going to be run for the device, so its runtime + * PM status must be changed to reflect the new state after the + * transition under way. + */ + if (!dpm_subsys_suspend_late_cb(dev, suspend_msg, NULL) && + !dpm_subsys_suspend_noirq_cb(dev, suspend_msg, NULL)) { + if (state.event == PM_EVENT_THAW) { + skip_resume = true; + goto Skip; + } else { + pm_runtime_set_active(dev); + } + } } - if (!callback && dev->driver && dev->driver->pm) { + if (dev->driver && dev->driver->pm) { info = "noirq driver "; callback = pm_noirq_op(dev->driver->pm, state); } +Run: error = dpm_run_callback(callback, dev, state, info); + +Skip: dev->power.is_noirq_suspended = false; - Out: + if (skip_resume) { + /* + * The device is going to be left in suspend, but it might not + * have been in runtime suspend before the system suspended, so + * its runtime PM status needs to be updated to avoid confusing + * the runtime PM framework when runtime PM is enabled for the + * device again. + */ + pm_runtime_set_suspended(dev); + dev_pm_skip_next_resume_phases(dev); + } + +Out: complete_all(&dev->power.completion); TRACE_RESUME(error); return error; @@ -681,6 +780,35 @@ void dpm_resume_noirq(pm_message_t state) dpm_noirq_end(); } +static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev, + pm_message_t state, + const char **info_p) +{ + pm_callback_t callback; + const char *info; + + if (dev->pm_domain) { + info = "early power domain "; + callback = pm_late_early_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "early type "; + callback = pm_late_early_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "early class "; + callback = pm_late_early_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "early bus "; + callback = pm_late_early_op(dev->bus->pm, state); + } else { + return NULL; + } + + if (info_p) + *info_p = info; + + return callback; +} + /** * device_resume_early - Execute an "early resume" callback for given device. * @dev: Device to handle. @@ -691,8 +819,8 @@ void dpm_resume_noirq(pm_message_t state) */ static int device_resume_early(struct device *dev, pm_message_t state, bool async) { - pm_callback_t callback = NULL; - const char *info = NULL; + pm_callback_t callback; + const char *info; int error = 0; TRACE_DEVICE(dev); @@ -706,19 +834,7 @@ static int device_resume_early(struct device *dev, pm_message_t state, bool asyn dpm_wait_for_superior(dev, async); - if (dev->pm_domain) { - info = "early power domain "; - callback = pm_late_early_op(&dev->pm_domain->ops, state); - } else if (dev->type && dev->type->pm) { - info = "early type "; - callback = pm_late_early_op(dev->type->pm, state); - } else if (dev->class && dev->class->pm) { - info = "early class "; - callback = pm_late_early_op(dev->class->pm, state); - } else if (dev->bus && dev->bus->pm) { - info = "early bus "; - callback = pm_late_early_op(dev->bus->pm, state); - } + callback = dpm_subsys_resume_early_cb(dev, state, &info); if (!callback && dev->driver && dev->driver->pm) { info = "early driver "; @@ -1089,6 +1205,77 @@ static pm_message_t resume_event(pm_message_t sleep_state) return PMSG_ON; } +static void dpm_superior_set_must_resume(struct device *dev) +{ + struct device_link *link; + int idx; + + if (dev->parent) + dev->parent->power.must_resume = true; + + idx = device_links_read_lock(); + + list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) + link->supplier->power.must_resume = true; + + device_links_read_unlock(idx); +} + +static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev, + pm_message_t state, + const char **info_p) +{ + pm_callback_t callback; + const char *info; + + if (dev->pm_domain) { + info = "noirq power domain "; + callback = pm_noirq_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "noirq type "; + callback = pm_noirq_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "noirq class "; + callback = pm_noirq_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "noirq bus "; + callback = pm_noirq_op(dev->bus->pm, state); + } else { + return NULL; + } + + if (info_p) + *info_p = info; + + return callback; +} + +static bool device_must_resume(struct device *dev, pm_message_t state, + bool no_subsys_suspend_noirq) +{ + pm_message_t resume_msg = resume_event(state); + + /* + * If all of the device driver's "noirq", "late" and "early" callbacks + * are invoked directly by the core, the decision to allow the device to + * stay in suspend can be based on its current runtime PM status and its + * wakeup settings. + */ + if (no_subsys_suspend_noirq && + !dpm_subsys_suspend_late_cb(dev, state, NULL) && + !dpm_subsys_resume_early_cb(dev, resume_msg, NULL) && + !dpm_subsys_resume_noirq_cb(dev, resume_msg, NULL)) + return !pm_runtime_status_suspended(dev) && + (resume_msg.event != PM_EVENT_RESUME || + (device_can_wakeup(dev) && !device_may_wakeup(dev))); + + /* + * The only safe strategy here is to require that if the device may not + * be left in suspend, resume callbacks must be invoked for it. + */ + return !dev->power.may_skip_resume; +} + /** * __device_suspend_noirq - Execute a "noirq suspend" callback for given device. * @dev: Device to handle. @@ -1100,8 +1287,9 @@ static pm_message_t resume_event(pm_message_t sleep_state) */ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool async) { - pm_callback_t callback = NULL; - const char *info = NULL; + pm_callback_t callback; + const char *info; + bool no_subsys_cb = false; int error = 0; TRACE_DEVICE(dev); @@ -1120,30 +1308,40 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (dev->power.syscore || dev->power.direct_complete) goto Complete; - if (dev->pm_domain) { - info = "noirq power domain "; - callback = pm_noirq_op(&dev->pm_domain->ops, state); - } else if (dev->type && dev->type->pm) { - info = "noirq type "; - callback = pm_noirq_op(dev->type->pm, state); - } else if (dev->class && dev->class->pm) { - info = "noirq class "; - callback = pm_noirq_op(dev->class->pm, state); - } else if (dev->bus && dev->bus->pm) { - info = "noirq bus "; - callback = pm_noirq_op(dev->bus->pm, state); - } + callback = dpm_subsys_suspend_noirq_cb(dev, state, &info); + if (callback) + goto Run; - if (!callback && dev->driver && dev->driver->pm) { + no_subsys_cb = !dpm_subsys_suspend_late_cb(dev, state, NULL); + + if (dev_pm_smart_suspend_and_suspended(dev) && no_subsys_cb) + goto Skip; + + if (dev->driver && dev->driver->pm) { info = "noirq driver "; callback = pm_noirq_op(dev->driver->pm, state); } +Run: error = dpm_run_callback(callback, dev, state, info); - if (!error) - dev->power.is_noirq_suspended = true; - else + if (error) { async_error = error; + goto Complete; + } + +Skip: + dev->power.is_noirq_suspended = true; + + if (dev_pm_test_driver_flags(dev, DPM_FLAG_LEAVE_SUSPENDED)) { + dev->power.must_resume = dev->power.must_resume || + atomic_read(&dev->power.usage_count) > 1 || + device_must_resume(dev, state, no_subsys_cb); + } else { + dev->power.must_resume = true; + } + + if (dev->power.must_resume) + dpm_superior_set_must_resume(dev); Complete: complete_all(&dev->power.completion); @@ -1249,6 +1447,50 @@ int dpm_suspend_noirq(pm_message_t state) return ret; } +static void dpm_propagate_wakeup_to_parent(struct device *dev) +{ + struct device *parent = dev->parent; + + if (!parent) + return; + + spin_lock_irq(&parent->power.lock); + + if (dev->power.wakeup_path && !parent->power.ignore_children) + parent->power.wakeup_path = true; + + spin_unlock_irq(&parent->power.lock); +} + +static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev, + pm_message_t state, + const char **info_p) +{ + pm_callback_t callback; + const char *info; + + if (dev->pm_domain) { + info = "late power domain "; + callback = pm_late_early_op(&dev->pm_domain->ops, state); + } else if (dev->type && dev->type->pm) { + info = "late type "; + callback = pm_late_early_op(dev->type->pm, state); + } else if (dev->class && dev->class->pm) { + info = "late class "; + callback = pm_late_early_op(dev->class->pm, state); + } else if (dev->bus && dev->bus->pm) { + info = "late bus "; + callback = pm_late_early_op(dev->bus->pm, state); + } else { + return NULL; + } + + if (info_p) + *info_p = info; + + return callback; +} + /** * __device_suspend_late - Execute a "late suspend" callback for given device. * @dev: Device to handle. @@ -1259,8 +1501,8 @@ int dpm_suspend_noirq(pm_message_t state) */ static int __device_suspend_late(struct device *dev, pm_message_t state, bool async) { - pm_callback_t callback = NULL; - const char *info = NULL; + pm_callback_t callback; + const char *info; int error = 0; TRACE_DEVICE(dev); @@ -1281,30 +1523,29 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as if (dev->power.syscore || dev->power.direct_complete) goto Complete; - if (dev->pm_domain) { - info = "late power domain "; - callback = pm_late_early_op(&dev->pm_domain->ops, state); - } else if (dev->type && dev->type->pm) { - info = "late type "; - callback = pm_late_early_op(dev->type->pm, state); - } else if (dev->class && dev->class->pm) { - info = "late class "; - callback = pm_late_early_op(dev->class->pm, state); - } else if (dev->bus && dev->bus->pm) { - info = "late bus "; - callback = pm_late_early_op(dev->bus->pm, state); - } + callback = dpm_subsys_suspend_late_cb(dev, state, &info); + if (callback) + goto Run; - if (!callback && dev->driver && dev->driver->pm) { + if (dev_pm_smart_suspend_and_suspended(dev) && + !dpm_subsys_suspend_noirq_cb(dev, state, NULL)) + goto Skip; + + if (dev->driver && dev->driver->pm) { info = "late driver "; callback = pm_late_early_op(dev->driver->pm, state); } +Run: error = dpm_run_callback(callback, dev, state, info); - if (!error) - dev->power.is_late_suspended = true; - else + if (error) { async_error = error; + goto Complete; + } + dpm_propagate_wakeup_to_parent(dev); + +Skip: + dev->power.is_late_suspended = true; Complete: TRACE_SUSPEND(error); @@ -1435,11 +1676,17 @@ static int legacy_suspend(struct device *dev, pm_message_t state, return error; } -static void dpm_clear_suppliers_direct_complete(struct device *dev) +static void dpm_clear_superiors_direct_complete(struct device *dev) { struct device_link *link; int idx; + if (dev->parent) { + spin_lock_irq(&dev->parent->power.lock); + dev->parent->power.direct_complete = false; + spin_unlock_irq(&dev->parent->power.lock); + } + idx = device_links_read_lock(); list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) { @@ -1500,6 +1747,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) dev->power.direct_complete = false; } + dev->power.may_skip_resume = false; + dev->power.must_resume = false; + dpm_watchdog_set(&wd, dev); device_lock(dev); @@ -1543,20 +1793,12 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) End: if (!error) { - struct device *parent = dev->parent; - dev->power.is_suspended = true; - if (parent) { - spin_lock_irq(&parent->power.lock); - - dev->parent->power.direct_complete = false; - if (dev->power.wakeup_path - && !dev->parent->power.ignore_children) - dev->parent->power.wakeup_path = true; + if (device_may_wakeup(dev)) + dev->power.wakeup_path = true; - spin_unlock_irq(&parent->power.lock); - } - dpm_clear_suppliers_direct_complete(dev); + dpm_propagate_wakeup_to_parent(dev); + dpm_clear_superiors_direct_complete(dev); } device_unlock(dev); @@ -1665,8 +1907,9 @@ static int device_prepare(struct device *dev, pm_message_t state) if (dev->power.syscore) return 0; - WARN_ON(dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) && - !pm_runtime_enabled(dev)); + WARN_ON(!pm_runtime_enabled(dev) && + dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED)); /* * If a device's parent goes into runtime suspend at the wrong time, @@ -1678,7 +1921,7 @@ static int device_prepare(struct device *dev, pm_message_t state) device_lock(dev); - dev->power.wakeup_path = device_may_wakeup(dev); + dev->power.wakeup_path = false; if (dev->power.no_pm_callbacks) { ret = 1; /* Let device go direct_complete */ diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 7beee75399d4..21244c53e377 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -41,20 +41,15 @@ extern void dev_pm_disable_wake_irq_check(struct device *dev); #ifdef CONFIG_PM_SLEEP -extern int device_wakeup_attach_irq(struct device *dev, - struct wake_irq *wakeirq); +extern void device_wakeup_attach_irq(struct device *dev, struct wake_irq *wakeirq); extern void device_wakeup_detach_irq(struct device *dev); extern void device_wakeup_arm_wake_irqs(void); extern void device_wakeup_disarm_wake_irqs(void); #else -static inline int -device_wakeup_attach_irq(struct device *dev, - struct wake_irq *wakeirq) -{ - return 0; -} +static inline void device_wakeup_attach_irq(struct device *dev, + struct wake_irq *wakeirq) {} static inline void device_wakeup_detach_irq(struct device *dev) { diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 6e89b51ea3d9..8bef3cb2424d 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1613,22 +1613,34 @@ void pm_runtime_drop_link(struct device *dev) spin_unlock_irq(&dev->power.lock); } +static bool pm_runtime_need_not_resume(struct device *dev) +{ + return atomic_read(&dev->power.usage_count) <= 1 && + (atomic_read(&dev->power.child_count) == 0 || + dev->power.ignore_children); +} + /** * pm_runtime_force_suspend - Force a device into suspend state if needed. * @dev: Device to suspend. * * Disable runtime PM so we safely can check the device's runtime PM status and - * if it is active, invoke it's .runtime_suspend callback to bring it into - * suspend state. Keep runtime PM disabled to preserve the state unless we - * encounter errors. + * if it is active, invoke its ->runtime_suspend callback to suspend it and + * change its runtime PM status field to RPM_SUSPENDED. Also, if the device's + * usage and children counters don't indicate that the device was in use before + * the system-wide transition under way, decrement its parent's children counter + * (if there is a parent). Keep runtime PM disabled to preserve the state + * unless we encounter errors. * * Typically this function may be invoked from a system suspend callback to make - * sure the device is put into low power state. + * sure the device is put into low power state and it should only be used during + * system-wide PM transitions to sleep states. It assumes that the analogous + * pm_runtime_force_resume() will be used to resume the device. */ int pm_runtime_force_suspend(struct device *dev) { int (*callback)(struct device *); - int ret = 0; + int ret; pm_runtime_disable(dev); if (pm_runtime_status_suspended(dev)) @@ -1636,27 +1648,23 @@ int pm_runtime_force_suspend(struct device *dev) callback = RPM_GET_CALLBACK(dev, runtime_suspend); - if (!callback) { - ret = -ENOSYS; - goto err; - } - - ret = callback(dev); + ret = callback ? callback(dev) : 0; if (ret) goto err; /* - * Increase the runtime PM usage count for the device's parent, in case - * when we find the device being used when system suspend was invoked. - * This informs pm_runtime_force_resume() to resume the parent - * immediately, which is needed to be able to resume its children, - * when not deferring the resume to be managed via runtime PM. + * If the device can stay in suspend after the system-wide transition + * to the working state that will follow, drop the children counter of + * its parent, but set its status to RPM_SUSPENDED anyway in case this + * function will be called again for it in the meantime. */ - if (dev->parent && atomic_read(&dev->power.usage_count) > 1) - pm_runtime_get_noresume(dev->parent); + if (pm_runtime_need_not_resume(dev)) + pm_runtime_set_suspended(dev); + else + __update_runtime_status(dev, RPM_SUSPENDED); - pm_runtime_set_suspended(dev); return 0; + err: pm_runtime_enable(dev); return ret; @@ -1669,13 +1677,9 @@ EXPORT_SYMBOL_GPL(pm_runtime_force_suspend); * * Prior invoking this function we expect the user to have brought the device * into low power state by a call to pm_runtime_force_suspend(). Here we reverse - * those actions and brings the device into full power, if it is expected to be - * used on system resume. To distinguish that, we check whether the runtime PM - * usage count is greater than 1 (the PM core increases the usage count in the - * system PM prepare phase), as that indicates a real user (such as a subsystem, - * driver, userspace, etc.) is using it. If that is the case, the device is - * expected to be used on system resume as well, so then we resume it. In the - * other case, we defer the resume to be managed via runtime PM. + * those actions and bring the device into full power, if it is expected to be + * used on system resume. In the other case, we defer the resume to be managed + * via runtime PM. * * Typically this function may be invoked from a system resume callback. */ @@ -1684,32 +1688,18 @@ int pm_runtime_force_resume(struct device *dev) int (*callback)(struct device *); int ret = 0; - callback = RPM_GET_CALLBACK(dev, runtime_resume); - - if (!callback) { - ret = -ENOSYS; - goto out; - } - - if (!pm_runtime_status_suspended(dev)) + if (!pm_runtime_status_suspended(dev) || pm_runtime_need_not_resume(dev)) goto out; /* - * Decrease the parent's runtime PM usage count, if we increased it - * during system suspend in pm_runtime_force_suspend(). - */ - if (atomic_read(&dev->power.usage_count) > 1) { - if (dev->parent) - pm_runtime_put_noidle(dev->parent); - } else { - goto out; - } + * The value of the parent's children counter is correct already, so + * just update the status of the device. + */ + __update_runtime_status(dev, RPM_ACTIVE); - ret = pm_runtime_set_active(dev); - if (ret) - goto out; + callback = RPM_GET_CALLBACK(dev, runtime_resume); - ret = callback(dev); + ret = callback ? callback(dev) : 0; if (ret) { pm_runtime_set_suspended(dev); goto out; diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index e153e28b1857..0f651efc58a1 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -108,16 +108,10 @@ static ssize_t control_show(struct device *dev, struct device_attribute *attr, static ssize_t control_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n) { - char *cp; - int len = n; - - cp = memchr(buf, '\n', n); - if (cp) - len = cp - buf; device_lock(dev); - if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0) + if (sysfs_streq(buf, ctrl_auto)) pm_runtime_allow(dev); - else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0) + else if (sysfs_streq(buf, ctrl_on)) pm_runtime_forbid(dev); else n = -EINVAL; @@ -125,9 +119,9 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr, return n; } -static DEVICE_ATTR(control, 0644, control_show, control_store); +static DEVICE_ATTR_RW(control); -static ssize_t rtpm_active_time_show(struct device *dev, +static ssize_t runtime_active_time_show(struct device *dev, struct device_attribute *attr, char *buf) { int ret; @@ -138,9 +132,9 @@ static ssize_t rtpm_active_time_show(struct device *dev, return ret; } -static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL); +static DEVICE_ATTR_RO(runtime_active_time); -static ssize_t rtpm_suspended_time_show(struct device *dev, +static ssize_t runtime_suspended_time_show(struct device *dev, struct device_attribute *attr, char *buf) { int ret; @@ -152,9 +146,9 @@ static ssize_t rtpm_suspended_time_show(struct device *dev, return ret; } -static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL); +static DEVICE_ATTR_RO(runtime_suspended_time); -static ssize_t rtpm_status_show(struct device *dev, +static ssize_t runtime_status_show(struct device *dev, struct device_attribute *attr, char *buf) { const char *p; @@ -184,7 +178,7 @@ static ssize_t rtpm_status_show(struct device *dev, return sprintf(buf, p); } -static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL); +static DEVICE_ATTR_RO(runtime_status); static ssize_t autosuspend_delay_ms_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -211,26 +205,25 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev, return n; } -static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, - autosuspend_delay_ms_store); +static DEVICE_ATTR_RW(autosuspend_delay_ms); -static ssize_t pm_qos_resume_latency_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t pm_qos_resume_latency_us_show(struct device *dev, + struct device_attribute *attr, + char *buf) { s32 value = dev_pm_qos_requested_resume_latency(dev); if (value == 0) return sprintf(buf, "n/a\n"); - else if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) + if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) value = 0; return sprintf(buf, "%d\n", value); } -static ssize_t pm_qos_resume_latency_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t n) +static ssize_t pm_qos_resume_latency_us_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) { s32 value; int ret; @@ -245,7 +238,7 @@ static ssize_t pm_qos_resume_latency_store(struct device *dev, if (value == 0) value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; - } else if (!strcmp(buf, "n/a") || !strcmp(buf, "n/a\n")) { + } else if (sysfs_streq(buf, "n/a")) { value = 0; } else { return -EINVAL; @@ -256,26 +249,25 @@ static ssize_t pm_qos_resume_latency_store(struct device *dev, return ret < 0 ? ret : n; } -static DEVICE_ATTR(pm_qos_resume_latency_us, 0644, - pm_qos_resume_latency_show, pm_qos_resume_latency_store); +static DEVICE_ATTR_RW(pm_qos_resume_latency_us); -static ssize_t pm_qos_latency_tolerance_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t pm_qos_latency_tolerance_us_show(struct device *dev, + struct device_attribute *attr, + char *buf) { s32 value = dev_pm_qos_get_user_latency_tolerance(dev); if (value < 0) return sprintf(buf, "auto\n"); - else if (value == PM_QOS_LATENCY_ANY) + if (value == PM_QOS_LATENCY_ANY) return sprintf(buf, "any\n"); return sprintf(buf, "%d\n", value); } -static ssize_t pm_qos_latency_tolerance_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t n) +static ssize_t pm_qos_latency_tolerance_us_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) { s32 value; int ret; @@ -285,9 +277,9 @@ static ssize_t pm_qos_latency_tolerance_store(struct device *dev, if (value < 0) return -EINVAL; } else { - if (!strcmp(buf, "auto") || !strcmp(buf, "auto\n")) + if (sysfs_streq(buf, "auto")) value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; - else if (!strcmp(buf, "any") || !strcmp(buf, "any\n")) + else if (sysfs_streq(buf, "any")) value = PM_QOS_LATENCY_ANY; else return -EINVAL; @@ -296,8 +288,7 @@ static ssize_t pm_qos_latency_tolerance_store(struct device *dev, return ret < 0 ? ret : n; } -static DEVICE_ATTR(pm_qos_latency_tolerance_us, 0644, - pm_qos_latency_tolerance_show, pm_qos_latency_tolerance_store); +static DEVICE_ATTR_RW(pm_qos_latency_tolerance_us); static ssize_t pm_qos_no_power_off_show(struct device *dev, struct device_attribute *attr, @@ -323,49 +314,39 @@ static ssize_t pm_qos_no_power_off_store(struct device *dev, return ret < 0 ? ret : n; } -static DEVICE_ATTR(pm_qos_no_power_off, 0644, - pm_qos_no_power_off_show, pm_qos_no_power_off_store); +static DEVICE_ATTR_RW(pm_qos_no_power_off); #ifdef CONFIG_PM_SLEEP static const char _enabled[] = "enabled"; static const char _disabled[] = "disabled"; -static ssize_t -wake_show(struct device * dev, struct device_attribute *attr, char * buf) +static ssize_t wakeup_show(struct device *dev, struct device_attribute *attr, + char *buf) { return sprintf(buf, "%s\n", device_can_wakeup(dev) ? (device_may_wakeup(dev) ? _enabled : _disabled) : ""); } -static ssize_t -wake_store(struct device * dev, struct device_attribute *attr, - const char * buf, size_t n) +static ssize_t wakeup_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) { - char *cp; - int len = n; - if (!device_can_wakeup(dev)) return -EINVAL; - cp = memchr(buf, '\n', n); - if (cp) - len = cp - buf; - if (len == sizeof _enabled - 1 - && strncmp(buf, _enabled, sizeof _enabled - 1) == 0) + if (sysfs_streq(buf, _enabled)) device_set_wakeup_enable(dev, 1); - else if (len == sizeof _disabled - 1 - && strncmp(buf, _disabled, sizeof _disabled - 1) == 0) + else if (sysfs_streq(buf, _disabled)) device_set_wakeup_enable(dev, 0); else return -EINVAL; return n; } -static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); +static DEVICE_ATTR_RW(wakeup); static ssize_t wakeup_count_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { unsigned long count = 0; bool enabled = false; @@ -379,10 +360,11 @@ static ssize_t wakeup_count_show(struct device *dev, return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL); +static DEVICE_ATTR_RO(wakeup_count); static ssize_t wakeup_active_count_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { unsigned long count = 0; bool enabled = false; @@ -396,11 +378,11 @@ static ssize_t wakeup_active_count_show(struct device *dev, return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL); +static DEVICE_ATTR_RO(wakeup_active_count); static ssize_t wakeup_abort_count_show(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, + char *buf) { unsigned long count = 0; bool enabled = false; @@ -414,7 +396,7 @@ static ssize_t wakeup_abort_count_show(struct device *dev, return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_abort_count, 0444, wakeup_abort_count_show, NULL); +static DEVICE_ATTR_RO(wakeup_abort_count); static ssize_t wakeup_expire_count_show(struct device *dev, struct device_attribute *attr, @@ -432,10 +414,10 @@ static ssize_t wakeup_expire_count_show(struct device *dev, return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_expire_count, 0444, wakeup_expire_count_show, NULL); +static DEVICE_ATTR_RO(wakeup_expire_count); static ssize_t wakeup_active_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { unsigned int active = 0; bool enabled = false; @@ -449,10 +431,11 @@ static ssize_t wakeup_active_show(struct device *dev, return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL); +static DEVICE_ATTR_RO(wakeup_active); -static ssize_t wakeup_total_time_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t wakeup_total_time_ms_show(struct device *dev, + struct device_attribute *attr, + char *buf) { s64 msec = 0; bool enabled = false; @@ -466,10 +449,10 @@ static ssize_t wakeup_total_time_show(struct device *dev, return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL); +static DEVICE_ATTR_RO(wakeup_total_time_ms); -static ssize_t wakeup_max_time_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t wakeup_max_time_ms_show(struct device *dev, + struct device_attribute *attr, char *buf) { s64 msec = 0; bool enabled = false; @@ -483,10 +466,11 @@ static ssize_t wakeup_max_time_show(struct device *dev, return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL); +static DEVICE_ATTR_RO(wakeup_max_time_ms); -static ssize_t wakeup_last_time_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t wakeup_last_time_ms_show(struct device *dev, + struct device_attribute *attr, + char *buf) { s64 msec = 0; bool enabled = false; @@ -500,12 +484,12 @@ static ssize_t wakeup_last_time_show(struct device *dev, return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL); +static DEVICE_ATTR_RO(wakeup_last_time_ms); #ifdef CONFIG_PM_AUTOSLEEP -static ssize_t wakeup_prevent_sleep_time_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t wakeup_prevent_sleep_time_ms_show(struct device *dev, + struct device_attribute *attr, + char *buf) { s64 msec = 0; bool enabled = false; @@ -519,40 +503,39 @@ static ssize_t wakeup_prevent_sleep_time_show(struct device *dev, return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); } -static DEVICE_ATTR(wakeup_prevent_sleep_time_ms, 0444, - wakeup_prevent_sleep_time_show, NULL); +static DEVICE_ATTR_RO(wakeup_prevent_sleep_time_ms); #endif /* CONFIG_PM_AUTOSLEEP */ #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_ADVANCED_DEBUG -static ssize_t rtpm_usagecount_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t runtime_usage_show(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count)); } +static DEVICE_ATTR_RO(runtime_usage); -static ssize_t rtpm_children_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t runtime_active_kids_show(struct device *dev, + struct device_attribute *attr, + char *buf) { return sprintf(buf, "%d\n", dev->power.ignore_children ? 0 : atomic_read(&dev->power.child_count)); } +static DEVICE_ATTR_RO(runtime_active_kids); -static ssize_t rtpm_enabled_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t runtime_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) { - if ((dev->power.disable_depth) && (dev->power.runtime_auto == false)) + if (dev->power.disable_depth && (dev->power.runtime_auto == false)) return sprintf(buf, "disabled & forbidden\n"); - else if (dev->power.disable_depth) + if (dev->power.disable_depth) return sprintf(buf, "disabled\n"); - else if (dev->power.runtime_auto == false) + if (dev->power.runtime_auto == false) return sprintf(buf, "forbidden\n"); return sprintf(buf, "enabled\n"); } - -static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL); -static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL); -static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL); +static DEVICE_ATTR_RO(runtime_enabled); #ifdef CONFIG_PM_SLEEP static ssize_t async_show(struct device *dev, struct device_attribute *attr, @@ -566,23 +549,16 @@ static ssize_t async_show(struct device *dev, struct device_attribute *attr, static ssize_t async_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - char *cp; - int len = n; - - cp = memchr(buf, '\n', n); - if (cp) - len = cp - buf; - if (len == sizeof _enabled - 1 && strncmp(buf, _enabled, len) == 0) + if (sysfs_streq(buf, _enabled)) device_enable_async_suspend(dev); - else if (len == sizeof _disabled - 1 && - strncmp(buf, _disabled, len) == 0) + else if (sysfs_streq(buf, _disabled)) device_disable_async_suspend(dev); else return -EINVAL; return n; } -static DEVICE_ATTR(async, 0644, async_show, async_store); +static DEVICE_ATTR_RW(async); #endif /* CONFIG_PM_SLEEP */ #endif /* CONFIG_PM_ADVANCED_DEBUG */ diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c index ae0429827f31..a8ac86e4d79e 100644 --- a/drivers/base/power/wakeirq.c +++ b/drivers/base/power/wakeirq.c @@ -33,7 +33,6 @@ static int dev_pm_attach_wake_irq(struct device *dev, int irq, struct wake_irq *wirq) { unsigned long flags; - int err; if (!dev || !wirq) return -EINVAL; @@ -45,12 +44,11 @@ static int dev_pm_attach_wake_irq(struct device *dev, int irq, return -EEXIST; } - err = device_wakeup_attach_irq(dev, wirq); - if (!err) - dev->power.wakeirq = wirq; + dev->power.wakeirq = wirq; + device_wakeup_attach_irq(dev, wirq); spin_unlock_irqrestore(&dev->power.lock, flags); - return err; + return 0; } /** diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 38559f04db2c..ea01621ed769 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -19,6 +19,11 @@ #include "power.h" +#ifndef CONFIG_SUSPEND +suspend_state_t pm_suspend_target_state; +#define pm_suspend_target_state (PM_SUSPEND_ON) +#endif + /* * If set, the suspend/hibernate code will abort transitions to a sleep state * if wakeup events are registered during or immediately before the transition. @@ -268,6 +273,9 @@ int device_wakeup_enable(struct device *dev) if (!dev || !dev->power.can_wakeup) return -EINVAL; + if (pm_suspend_target_state != PM_SUSPEND_ON) + dev_dbg(dev, "Suspicious %s() during system transition!\n", __func__); + ws = wakeup_source_register(dev_name(dev)); if (!ws) return -ENOMEM; @@ -291,22 +299,19 @@ EXPORT_SYMBOL_GPL(device_wakeup_enable); * * Call under the device's power.lock lock. */ -int device_wakeup_attach_irq(struct device *dev, +void device_wakeup_attach_irq(struct device *dev, struct wake_irq *wakeirq) { struct wakeup_source *ws; ws = dev->power.wakeup; - if (!ws) { - dev_err(dev, "forgot to call call device_init_wakeup?\n"); - return -EINVAL; - } + if (!ws) + return; if (ws->wakeirq) - return -EEXIST; + dev_err(dev, "Leftover wakeup IRQ found, overriding\n"); ws->wakeirq = wakeirq; - return 0; } /** @@ -448,9 +453,7 @@ int device_init_wakeup(struct device *dev, bool enable) device_set_wakeup_capable(dev, true); ret = device_wakeup_enable(dev); } else { - if (dev->power.can_wakeup) - device_wakeup_disable(dev); - + device_wakeup_disable(dev); device_set_wakeup_capable(dev, false); } @@ -464,9 +467,6 @@ EXPORT_SYMBOL_GPL(device_init_wakeup); */ int device_set_wakeup_enable(struct device *dev, bool enable) { - if (!dev || !dev->power.can_wakeup) - return -EINVAL; - return enable ? device_wakeup_enable(dev) : device_wakeup_disable(dev); } EXPORT_SYMBOL_GPL(device_set_wakeup_enable); diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index dc7b3c7b7d42..57e011d36a79 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -120,7 +120,7 @@ config QCOM_EBI2 SRAM, ethernet adapters, FPGAs and LCD displays. config SIMPLE_PM_BUS - bool "Simple Power-Managed Bus Driver" + tristate "Simple Power-Managed Bus Driver" depends on OF && PM help Driver for transparent busses that don't need a real driver, but diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index bdce4488ded1..3a88e33b0cfe 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -2,6 +2,29 @@ # ARM CPU Frequency scaling drivers # +config ACPI_CPPC_CPUFREQ + tristate "CPUFreq driver based on the ACPI CPPC spec" + depends on ACPI_PROCESSOR + select ACPI_CPPC_LIB + help + This adds a CPUFreq driver which uses CPPC methods + as described in the ACPIv5.1 spec. CPPC stands for + Collaborative Processor Performance Controls. It + is based on an abstract continuous scale of CPU + performance values which allows the remote power + processor to flexibly optimize for power and + performance. CPPC relies on power management firmware + support for its operation. + + If in doubt, say N. + +config ARM_ARMADA_37XX_CPUFREQ + tristate "Armada 37xx CPUFreq support" + depends on ARCH_MVEBU + help + This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. + The Armada 37xx PMU supports 4 frequency and VDD levels. + # big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" @@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. +config ARM_DT_BL_CPUFREQ + tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && OF + help + This enables probing via DT for Generic CPUfreq driver for ARM + big.LITTLE platform. This gets frequency tables from DT. + +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI + help + This adds the CPUfreq driver support for ARM big.LITTLE platforms + using SCPI protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + +config ARM_VEXPRESS_SPC_CPUFREQ + tristate "Versatile Express SPC based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC + help + This add the CPUfreq driver support for Versatile Express + big.LITTLE platforms using SPC for power management. + config ARM_BRCMSTB_AVS_CPUFREQ tristate "Broadcom STB AVS CPUfreq driver" depends on ARCH_BRCMSTB || COMPILE_TEST @@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG If in doubt, say N. -config ARM_DT_BL_CPUFREQ - tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && OF - help - This enables probing via DT for Generic CPUfreq driver for ARM - big.LITTLE platform. This gets frequency tables from DT. - -config ARM_VEXPRESS_SPC_CPUFREQ - tristate "Versatile Express SPC based CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC - help - This add the CPUfreq driver support for Versatile Express - big.LITTLE platforms using SPC for power management. - config ARM_EXYNOS5440_CPUFREQ tristate "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 @@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ config ARM_SA1110_CPUFREQ bool -config ARM_SCPI_CPUFREQ - tristate "SCPI based CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI - help - This adds the CPUfreq driver support for ARM big.LITTLE platforms - using SCPI protocol for CPU power management. - - This driver uses SCPI Message Protocol driver to interact with the - firmware providing the CPU DVFS functionality. - config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR @@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ This add the CPUFreq driver support for Intel PXA2xx SOCs. If in doubt, say N. - -config ACPI_CPPC_CPUFREQ - tristate "CPUFreq driver based on the ACPI CPPC spec" - depends on ACPI_PROCESSOR - select ACPI_CPPC_LIB - default n - help - This adds a CPUFreq driver which uses CPPC methods - as described in the ACPIv5.1 spec. CPPC stands for - Collaborative Processor Performance Controls. It - is based on an abstract continuous scale of CPU - performance values which allows the remote power - processor to flexibly optimize for power and - performance. CPPC relies on power management firmware - support for its operation. - - If in doubt, say N. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 812f9e0d01a3..e07715ce8844 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o # LITTLE drivers, so that it is probed last. obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o +obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o +obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o +obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o @@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o -obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o -obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o ################################################################################## diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 65ec5f01aa8d..c56b57dcfda5 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -526,34 +526,13 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy) static void bL_cpufreq_ready(struct cpufreq_policy *policy) { - struct device *cpu_dev = get_cpu_device(policy->cpu); int cur_cluster = cpu_to_cluster(policy->cpu); - struct device_node *np; /* Do not register a cpu_cooling device if we are in IKS mode */ if (cur_cluster >= MAX_CLUSTERS) return; - np = of_node_get(cpu_dev->of_node); - if (WARN_ON(!np)) - return; - - if (of_find_property(np, "#cooling-cells", NULL)) { - u32 power_coefficient = 0; - - of_property_read_u32(np, "dynamic-power-coefficient", - &power_coefficient); - - cdev[cur_cluster] = of_cpufreq_power_cooling_register(np, - policy, power_coefficient, NULL); - if (IS_ERR(cdev[cur_cluster])) { - dev_err(cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev[cur_cluster])); - cdev[cur_cluster] = NULL; - } - } - of_node_put(np); + cdev[cur_cluster] = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver bL_cpufreq_driver = { diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c new file mode 100644 index 000000000000..c6ebc88a7d8d --- /dev/null +++ b/drivers/cpufreq/armada-37xx-cpufreq.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * CPU frequency scaling support for Armada 37xx platform. + * + * Copyright (C) 2017 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* Power management in North Bridge register set */ +#define ARMADA_37XX_NB_L0L1 0x18 +#define ARMADA_37XX_NB_L2L3 0x1C +#define ARMADA_37XX_NB_TBG_DIV_OFF 13 +#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 +#define ARMADA_37XX_NB_CLK_SEL_OFF 11 +#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 +#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1 +#define ARMADA_37XX_NB_TBG_SEL_OFF 9 +#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 +#define ARMADA_37XX_NB_VDD_SEL_OFF 6 +#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3 +#define ARMADA_37XX_NB_CONFIG_SHIFT 16 +#define ARMADA_37XX_NB_DYN_MOD 0x24 +#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26) +#define ARMADA_37XX_NB_TBG_EN BIT(28) +#define ARMADA_37XX_NB_DIV_EN BIT(29) +#define ARMADA_37XX_NB_VDD_EN BIT(30) +#define ARMADA_37XX_NB_DFS_EN BIT(31) +#define ARMADA_37XX_NB_CPU_LOAD 0x30 +#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 +#define ARMADA_37XX_DVFS_LOAD_0 0 +#define ARMADA_37XX_DVFS_LOAD_1 1 +#define ARMADA_37XX_DVFS_LOAD_2 2 +#define ARMADA_37XX_DVFS_LOAD_3 3 + +/* + * On Armada 37xx the Power management manages 4 level of CPU load, + * each level can be associated with a CPU clock source, a CPU + * divider, a VDD level, etc... + */ +#define LOAD_LEVEL_NR 4 + +struct armada_37xx_dvfs { + u32 cpu_freq_max; + u8 divider[LOAD_LEVEL_NR]; +}; + +static struct armada_37xx_dvfs armada_37xx_dvfs[] = { + {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, + {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} }, + {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} }, + {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} }, +}; + +static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) { + if (freq == armada_37xx_dvfs[i].cpu_freq_max) + return &armada_37xx_dvfs[i]; + } + + pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); + return NULL; +} + +/* + * Setup the four level managed by the hardware. Once the four level + * will be configured then the DVFS will be enabled. + */ +static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base, + struct clk *clk, u8 *divider) +{ + int load_lvl; + struct clk *parent; + + for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { + unsigned int reg, mask, val, offset = 0; + + if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1) + reg = ARMADA_37XX_NB_L0L1; + else + reg = ARMADA_37XX_NB_L2L3; + + if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 || + load_lvl == ARMADA_37XX_DVFS_LOAD_2) + offset += ARMADA_37XX_NB_CONFIG_SHIFT; + + /* Set cpu clock source, for all the level we use TBG */ + val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF; + mask = (ARMADA_37XX_NB_CLK_SEL_MASK + << ARMADA_37XX_NB_CLK_SEL_OFF); + + /* + * Set cpu divider based on the pre-computed array in + * order to have balanced step. + */ + val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF; + mask |= (ARMADA_37XX_NB_TBG_DIV_MASK + << ARMADA_37XX_NB_TBG_DIV_OFF); + + /* Set VDD divider which is actually the load level. */ + val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF; + mask |= (ARMADA_37XX_NB_VDD_SEL_MASK + << ARMADA_37XX_NB_VDD_SEL_OFF); + + val <<= offset; + mask <<= offset; + + regmap_update_bits(base, reg, mask, val); + } + + /* + * Set cpu clock source, for all the level we keep the same + * clock source that the one already configured. For this one + * we need to use the clock framework + */ + parent = clk_get_parent(clk); + clk_set_parent(clk, parent); +} + +static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base) +{ + unsigned int reg = ARMADA_37XX_NB_DYN_MOD, + mask = ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, 0); +} + +static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base) +{ + unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD, + mask = ARMADA_37XX_NB_CPU_LOAD_MASK; + + /* Start with the highest load (0) */ + val = ARMADA_37XX_DVFS_LOAD_0; + regmap_update_bits(base, reg, mask, val); + + /* Now enable DVFS for the CPUs */ + reg = ARMADA_37XX_NB_DYN_MOD; + mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN | + ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN | + ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, mask); +} + +static int __init armada37xx_cpufreq_driver_init(void) +{ + struct armada_37xx_dvfs *dvfs; + struct platform_device *pdev; + unsigned int cur_frequency; + struct regmap *nb_pm_base; + struct device *cpu_dev; + int load_lvl, ret; + struct clk *clk; + + nb_pm_base = + syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm"); + + if (IS_ERR(nb_pm_base)) + return -ENODEV; + + /* Before doing any configuration on the DVFS first, disable it */ + armada37xx_cpufreq_disable_dvfs(nb_pm_base); + + /* + * On CPU 0 register the operating points supported (which are + * the nominal CPU frequency and full integer divisions of + * it). + */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + dev_err(cpu_dev, "Cannot get CPU\n"); + return -ENODEV; + } + + clk = clk_get(cpu_dev, 0); + if (IS_ERR(clk)) { + dev_err(cpu_dev, "Cannot get clock for CPU0\n"); + return PTR_ERR(clk); + } + + /* Get nominal (current) CPU frequency */ + cur_frequency = clk_get_rate(clk); + if (!cur_frequency) { + dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); + return -EINVAL; + } + + dvfs = armada_37xx_cpu_freq_info_get(cur_frequency); + if (!dvfs) + return -EINVAL; + + armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); + + for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; + load_lvl++) { + unsigned long freq = cur_frequency / dvfs->divider[load_lvl]; + + ret = dev_pm_opp_add(cpu_dev, freq, 0); + if (ret) { + /* clean-up the already added opp before leaving */ + while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) { + freq = cur_frequency / dvfs->divider[load_lvl]; + dev_pm_opp_remove(cpu_dev, freq); + } + return ret; + } + } + + /* Now that everything is setup, enable the DVFS at hardware level */ + armada37xx_cpufreq_enable_dvfs(nb_pm_base); + + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + + return PTR_ERR_OR_ZERO(pdev); +} +/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */ +late_initcall(armada37xx_cpufreq_driver_init); + +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); +MODULE_DESCRIPTION("Armada 37xx cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index ecc56e26f8f6..3b585e4bfac5 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "marvell,armadaxp", }, + { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt2712", }, + { .compatible = "mediatek,mt7622", }, + { .compatible = "mediatek,mt7623", }, + { .compatible = "mediatek,mt817x", }, + { .compatible = "mediatek,mt8173", }, + { .compatible = "mediatek,mt8176", }, + { .compatible = "nvidia,tegra124", }, { .compatible = "st,stih407", }, diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 545946ad0752..de3d104c25d7 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -319,33 +319,8 @@ static int cpufreq_exit(struct cpufreq_policy *policy) static void cpufreq_ready(struct cpufreq_policy *policy) { struct private_data *priv = policy->driver_data; - struct device_node *np = of_node_get(priv->cpu_dev->of_node); - if (WARN_ON(!np)) - return; - - /* - * For now, just loading the cooling device; - * thermal DT code takes care of matching them. - */ - if (of_find_property(np, "#cooling-cells", NULL)) { - u32 power_coefficient = 0; - - of_property_read_u32(np, "dynamic-power-coefficient", - &power_coefficient); - - priv->cdev = of_cpufreq_power_cooling_register(np, - policy, power_coefficient, NULL); - if (IS_ERR(priv->cdev)) { - dev_err(priv->cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(priv->cdev)); - - priv->cdev = NULL; - } - } - - of_node_put(np); + priv->cdev = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver dt_cpufreq_driver = { diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 41d148af7748..421f318c0e66 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor) /** * cpufreq_parse_governor - parse a governor string */ -static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, - struct cpufreq_governor **governor) +static int cpufreq_parse_governor(char *str_governor, + struct cpufreq_policy *policy) { - int err = -EINVAL; - if (cpufreq_driver->setpolicy) { if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { - *policy = CPUFREQ_POLICY_PERFORMANCE; - err = 0; - } else if (!strncasecmp(str_governor, "powersave", - CPUFREQ_NAME_LEN)) { - *policy = CPUFREQ_POLICY_POWERSAVE; - err = 0; + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + return 0; + } + + if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) { + policy->policy = CPUFREQ_POLICY_POWERSAVE; + return 0; } } else { struct cpufreq_governor *t; @@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, mutex_lock(&cpufreq_governor_mutex); t = find_governor(str_governor); - - if (t == NULL) { + if (!t) { int ret; mutex_unlock(&cpufreq_governor_mutex); + ret = request_module("cpufreq_%s", str_governor); - mutex_lock(&cpufreq_governor_mutex); + if (ret) + return -EINVAL; - if (ret == 0) - t = find_governor(str_governor); - } + mutex_lock(&cpufreq_governor_mutex); - if (t != NULL) { - *governor = t; - err = 0; + t = find_governor(str_governor); } + if (t && !try_module_get(t->owner)) + t = NULL; mutex_unlock(&cpufreq_governor_mutex); + + if (t) { + policy->governor = t; + return 0; + } } - return err; + + return -EINVAL; } /** @@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, if (ret != 1) return -EINVAL; - if (cpufreq_parse_governor(str_governor, &new_policy.policy, - &new_policy.governor)) + if (cpufreq_parse_governor(str_governor, &new_policy)) return -EINVAL; ret = cpufreq_set_policy(policy, &new_policy); + + if (new_policy.governor) + module_put(new_policy.governor->owner); + return ret ? ret : count; } @@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy) if (policy->last_policy) new_policy.policy = policy->last_policy; else - cpufreq_parse_governor(gov->name, &new_policy.policy, - NULL); + cpufreq_parse_governor(gov->name, &new_policy); } /* set default policy */ return cpufreq_set_policy(policy, &new_policy); @@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor) mutex_lock(&cpufreq_governor_mutex); list_del(&governor->governor_list); mutex_unlock(&cpufreq_governor_mutex); - return; } EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 1e55b5790853..1572129844a5 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -27,7 +27,7 @@ struct cpufreq_stats { unsigned int *trans_table; }; -static int cpufreq_stats_update(struct cpufreq_stats *stats) +static void cpufreq_stats_update(struct cpufreq_stats *stats) { unsigned long long cur_time = get_jiffies_64(); @@ -35,7 +35,6 @@ static int cpufreq_stats_update(struct cpufreq_stats *stats) stats->time_in_state[stats->last_index] += cur_time - stats->last_time; stats->last_time = cur_time; spin_unlock(&cpufreq_stats_lock); - return 0; } static void cpufreq_stats_clear_table(struct cpufreq_stats *stats) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index d9b2c2de49c4..741f22e5cee3 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -25,15 +25,29 @@ static struct regulator *arm_reg; static struct regulator *pu_reg; static struct regulator *soc_reg; -static struct clk *arm_clk; -static struct clk *pll1_sys_clk; -static struct clk *pll1_sw_clk; -static struct clk *step_clk; -static struct clk *pll2_pfd2_396m_clk; - -/* clk used by i.MX6UL */ -static struct clk *pll2_bus_clk; -static struct clk *secondary_sel_clk; +enum IMX6_CPUFREQ_CLKS { + ARM, + PLL1_SYS, + STEP, + PLL1_SW, + PLL2_PFD2_396M, + /* MX6UL requires two more clks */ + PLL2_BUS, + SECONDARY_SEL, +}; +#define IMX6Q_CPUFREQ_CLK_NUM 5 +#define IMX6UL_CPUFREQ_CLK_NUM 7 + +static int num_clks; +static struct clk_bulk_data clks[] = { + { .id = "arm" }, + { .id = "pll1_sys" }, + { .id = "step" }, + { .id = "pll1_sw" }, + { .id = "pll2_pfd2_396m" }, + { .id = "pll2_bus" }, + { .id = "secondary_sel" }, +}; static struct device *cpu_dev; static bool free_opp; @@ -53,7 +67,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) new_freq = freq_table[index].frequency; freq_hz = new_freq * 1000; - old_freq = clk_get_rate(arm_clk) / 1000; + old_freq = clk_get_rate(clks[ARM].clk) / 1000; opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -112,29 +126,35 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) * voltage of 528MHz, so lower the CPU frequency to one * half before changing CPU frequency. */ - clk_set_rate(arm_clk, (old_freq >> 1) * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) - clk_set_parent(secondary_sel_clk, pll2_bus_clk); + clk_set_rate(clks[ARM].clk, (old_freq >> 1) * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_BUS].clk); else - clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk); - clk_set_parent(step_clk, secondary_sel_clk); - clk_set_parent(pll1_sw_clk, step_clk); + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[STEP].clk, clks[SECONDARY_SEL].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_BUS].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + } } else { - clk_set_parent(step_clk, pll2_pfd2_396m_clk); - clk_set_parent(pll1_sw_clk, step_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { - clk_set_rate(pll1_sys_clk, new_freq * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); + clk_set_parent(clks[STEP].clk, clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); } else { /* pll1_sys needs to be enabled for divider rate change to work. */ pll1_sys_temp_enabled = true; - clk_prepare_enable(pll1_sys_clk); + clk_prepare_enable(clks[PLL1_SYS].clk); } } /* Ensure the arm clock divider is what we expect */ - ret = clk_set_rate(arm_clk, new_freq * 1000); + ret = clk_set_rate(clks[ARM].clk, new_freq * 1000); if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); @@ -143,7 +163,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* PLL1 is only needed until after ARM-PODF is set. */ if (pll1_sys_temp_enabled) - clk_disable_unprepare(pll1_sys_clk); + clk_disable_unprepare(clks[PLL1_SYS].clk); /* scaling down? scale voltage after frequency */ if (new_freq < old_freq) { @@ -174,7 +194,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { int ret; - policy->clk = arm_clk; + policy->clk = clks[ARM].clk; ret = cpufreq_generic_init(policy, freq_table, transition_latency); policy->suspend_freq = policy->max; @@ -244,6 +264,43 @@ put_node: of_node_put(np); } +#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 + +static void imx6ul_opp_check_speed_grading(struct device *dev) +{ + struct device_node *np; + void __iomem *base; + u32 val; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp"); + if (!np) + return; + + base = of_iomap(np, 0); + if (!base) { + dev_err(dev, "failed to map ocotp\n"); + goto put_node; + } + + /* + * Speed GRADING[1:0] defines the max speed of ARM: + * 2b'00: Reserved; + * 2b'01: 528000000Hz; + * 2b'10: 696000000Hz; + * 2b'11: Reserved; + * We need to set the max speed of ARM according to fuse map. + */ + val = readl_relaxed(base + OCOTP_CFG3); + val >>= OCOTP_CFG3_SPEED_SHIFT; + val &= 0x3; + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + if (dev_pm_opp_disable(dev, 696000000)) + dev_warn(dev, "failed to disable 696MHz OPP\n"); + iounmap(base); +put_node: + of_node_put(np); +} + static int imx6q_cpufreq_probe(struct platform_device *pdev) { struct device_node *np; @@ -266,28 +323,15 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) return -ENOENT; } - arm_clk = clk_get(cpu_dev, "arm"); - pll1_sys_clk = clk_get(cpu_dev, "pll1_sys"); - pll1_sw_clk = clk_get(cpu_dev, "pll1_sw"); - step_clk = clk_get(cpu_dev, "step"); - pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m"); - if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || - IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { - dev_err(cpu_dev, "failed to get clocks\n"); - ret = -ENOENT; - goto put_clk; - } - if (of_machine_is_compatible("fsl,imx6ul") || - of_machine_is_compatible("fsl,imx6ull")) { - pll2_bus_clk = clk_get(cpu_dev, "pll2_bus"); - secondary_sel_clk = clk_get(cpu_dev, "secondary_sel"); - if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) { - dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n"); - ret = -ENOENT; - goto put_clk; - } - } + of_machine_is_compatible("fsl,imx6ull")) + num_clks = IMX6UL_CPUFREQ_CLK_NUM; + else + num_clks = IMX6Q_CPUFREQ_CLK_NUM; + + ret = clk_bulk_get(cpu_dev, num_clks, clks); + if (ret) + goto put_node; arm_reg = regulator_get(cpu_dev, "arm"); pu_reg = regulator_get_optional(cpu_dev, "pu"); @@ -311,7 +355,10 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) goto put_reg; } - imx6q_opp_check_speed_grading(cpu_dev); + if (of_machine_is_compatible("fsl,imx6ul")) + imx6ul_opp_check_speed_grading(cpu_dev); + else + imx6q_opp_check_speed_grading(cpu_dev); /* Because we have added the OPPs here, we must free them */ free_opp = true; @@ -424,22 +471,11 @@ put_reg: regulator_put(pu_reg); if (!IS_ERR(soc_reg)) regulator_put(soc_reg); -put_clk: - if (!IS_ERR(arm_clk)) - clk_put(arm_clk); - if (!IS_ERR(pll1_sys_clk)) - clk_put(pll1_sys_clk); - if (!IS_ERR(pll1_sw_clk)) - clk_put(pll1_sw_clk); - if (!IS_ERR(step_clk)) - clk_put(step_clk); - if (!IS_ERR(pll2_pfd2_396m_clk)) - clk_put(pll2_pfd2_396m_clk); - if (!IS_ERR(pll2_bus_clk)) - clk_put(pll2_bus_clk); - if (!IS_ERR(secondary_sel_clk)) - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); +put_node: of_node_put(np); + return ret; } @@ -453,13 +489,8 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev) if (!IS_ERR(pu_reg)) regulator_put(pu_reg); regulator_put(soc_reg); - clk_put(arm_clk); - clk_put(pll1_sys_clk); - clk_put(pll1_sw_clk); - clk_put(step_clk); - clk_put(pll2_pfd2_396m_clk); - clk_put(pll2_bus_clk); - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); return 0; } diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 93a0e88bef76..7edf7a0e5a96 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1595,15 +1595,6 @@ static const struct pstate_funcs knl_funcs = { .get_val = core_get_val, }; -static const struct pstate_funcs bxt_funcs = { - .get_max = core_get_max_pstate, - .get_max_physical = core_get_max_pstate_physical, - .get_min = core_get_min_pstate, - .get_turbo = core_get_turbo_pstate, - .get_scaling = core_get_scaling, - .get_val = core_get_val, -}; - #define ICPU(model, policy) \ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ (unsigned long)&policy } @@ -1627,8 +1618,9 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_funcs), ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_funcs), - ICPU(INTEL_FAM6_ATOM_GOLDMONT, bxt_funcs), - ICPU(INTEL_FAM6_ATOM_GEMINI_LAKE, bxt_funcs), + ICPU(INTEL_FAM6_ATOM_GOLDMONT, core_funcs), + ICPU(INTEL_FAM6_ATOM_GEMINI_LAKE, core_funcs), + ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index c46a12df40dd..5faa37c5b091 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); - policy->cpuinfo.transition_latency = 200000; /* nsec */ + policy->transition_delay_us = 200000; /* usec */ return cpufreq_table_validate_and_show(policy, longhaul_table); } diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c index e0d5090b303d..8c04dddd3c28 100644 --- a/drivers/cpufreq/mediatek-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -310,28 +310,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, static void mtk_cpufreq_ready(struct cpufreq_policy *policy) { struct mtk_cpu_dvfs_info *info = policy->driver_data; - struct device_node *np = of_node_get(info->cpu_dev->of_node); - u32 capacitance = 0; - if (WARN_ON(!np)) - return; - - if (of_find_property(np, "#cooling-cells", NULL)) { - of_property_read_u32(np, DYNAMIC_POWER, &capacitance); - - info->cdev = of_cpufreq_power_cooling_register(np, - policy, capacitance, NULL); - - if (IS_ERR(info->cdev)) { - dev_err(info->cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(info->cdev)); - - info->cdev = NULL; - } - } - - of_node_put(np); + info->cdev = of_cpufreq_cooling_register(policy); } static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) @@ -574,6 +554,7 @@ static struct platform_driver mtk_cpufreq_platdrv = { /* List of machines supported by this driver */ static const struct of_device_id mtk_cpufreq_machines[] __initconst = { { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt2712", }, { .compatible = "mediatek,mt7622", }, { .compatible = "mediatek,mt7623", }, { .compatible = "mediatek,mt817x", }, diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c index ed915ee85dd9..31513bd42705 100644 --- a/drivers/cpufreq/mvebu-cpufreq.c +++ b/drivers/cpufreq/mvebu-cpufreq.c @@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void) return PTR_ERR(clk); } - /* - * In case of a failure of dev_pm_opp_add(), we don't - * bother with cleaning up the registered OPP (there's - * no function to do so), and simply cancel the - * registration of the cpufreq device. - */ ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); if (ret) { clk_put(clk); @@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void) ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); if (ret) { clk_put(clk); - return ret; + dev_err(cpu_dev, "Failed to register OPPs\n"); + goto opp_register_failed; } ret = dev_pm_opp_set_sharing_cpus(cpu_dev, @@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void) if (ret) dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); + clk_put(clk); } platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; + +opp_register_failed: + /* As registering has failed remove all the opp for all cpus */ + dev_pm_opp_cpumask_remove_table(cpu_possible_mask); + + return ret; } device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index b6d7c4c98d0a..29cdec198657 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -29,6 +29,7 @@ #include <linux/reboot.h> #include <linux/slab.h> #include <linux/cpu.h> +#include <linux/hashtable.h> #include <trace/events/power.h> #include <asm/cputhreads.h> @@ -38,14 +39,13 @@ #include <asm/opal.h> #include <linux/timer.h> -#define POWERNV_MAX_PSTATES 256 +#define POWERNV_MAX_PSTATES_ORDER 8 +#define POWERNV_MAX_PSTATES (1UL << (POWERNV_MAX_PSTATES_ORDER)) #define PMSR_PSAFE_ENABLE (1UL << 30) #define PMSR_SPR_EM_DISABLE (1UL << 31) -#define PMSR_MAX(x) ((x >> 32) & 0xFF) +#define MAX_PSTATE_SHIFT 32 #define LPSTATE_SHIFT 48 #define GPSTATE_SHIFT 56 -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) #define MAX_RAMP_DOWN_TIME 5120 /* @@ -94,6 +94,27 @@ struct global_pstate_info { }; static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; + +DEFINE_HASHTABLE(pstate_revmap, POWERNV_MAX_PSTATES_ORDER); +/** + * struct pstate_idx_revmap_data: Entry in the hashmap pstate_revmap + * indexed by a function of pstate id. + * + * @pstate_id: pstate id for this entry. + * + * @cpufreq_table_idx: Index into the powernv_freqs + * cpufreq_frequency_table for frequency + * corresponding to pstate_id. + * + * @hentry: hlist_node that hooks this entry into the pstate_revmap + * hashtable + */ +struct pstate_idx_revmap_data { + u8 pstate_id; + unsigned int cpufreq_table_idx; + struct hlist_node hentry; +}; + static bool rebooting, throttled, occ_reset; static const char * const throttle_reason[] = { @@ -148,39 +169,56 @@ static struct powernv_pstate_info { bool wof_enabled; } powernv_pstate_info; -/* Use following macros for conversions between pstate_id and index */ -static inline int idx_to_pstate(unsigned int i) +static inline u8 extract_pstate(u64 pmsr_val, unsigned int shift) +{ + return ((pmsr_val >> shift) & 0xFF); +} + +#define extract_local_pstate(x) extract_pstate(x, LPSTATE_SHIFT) +#define extract_global_pstate(x) extract_pstate(x, GPSTATE_SHIFT) +#define extract_max_pstate(x) extract_pstate(x, MAX_PSTATE_SHIFT) + +/* Use following functions for conversions between pstate_id and index */ + +/** + * idx_to_pstate : Returns the pstate id corresponding to the + * frequency in the cpufreq frequency table + * powernv_freqs indexed by @i. + * + * If @i is out of bound, this will return the pstate + * corresponding to the nominal frequency. + */ +static inline u8 idx_to_pstate(unsigned int i) { if (unlikely(i >= powernv_pstate_info.nr_pstates)) { - pr_warn_once("index %u is out of bound\n", i); + pr_warn_once("idx_to_pstate: index %u is out of bound\n", i); return powernv_freqs[powernv_pstate_info.nominal].driver_data; } return powernv_freqs[i].driver_data; } -static inline unsigned int pstate_to_idx(int pstate) +/** + * pstate_to_idx : Returns the index in the cpufreq frequencytable + * powernv_freqs for the frequency whose corresponding + * pstate id is @pstate. + * + * If no frequency corresponding to @pstate is found, + * this will return the index of the nominal + * frequency. + */ +static unsigned int pstate_to_idx(u8 pstate) { - int min = powernv_freqs[powernv_pstate_info.min].driver_data; - int max = powernv_freqs[powernv_pstate_info.max].driver_data; + unsigned int key = pstate % POWERNV_MAX_PSTATES; + struct pstate_idx_revmap_data *revmap_data; - if (min > 0) { - if (unlikely((pstate < max) || (pstate > min))) { - pr_warn_once("pstate %d is out of bound\n", pstate); - return powernv_pstate_info.nominal; - } - } else { - if (unlikely((pstate > max) || (pstate < min))) { - pr_warn_once("pstate %d is out of bound\n", pstate); - return powernv_pstate_info.nominal; - } + hash_for_each_possible(pstate_revmap, revmap_data, hentry, key) { + if (revmap_data->pstate_id == pstate) + return revmap_data->cpufreq_table_idx; } - /* - * abs() is deliberately used so that is works with - * both monotonically increasing and decreasing - * pstate values - */ - return abs(pstate - idx_to_pstate(powernv_pstate_info.max)); + + pr_warn_once("pstate_to_idx: pstate 0x%x not found\n", pstate); + return powernv_pstate_info.nominal; } static inline void reset_gpstates(struct cpufreq_policy *policy) @@ -247,7 +285,7 @@ static int init_powernv_pstates(void) powernv_pstate_info.wof_enabled = true; next: - pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min, + pr_info("cpufreq pstate min 0x%x nominal 0x%x max 0x%x\n", pstate_min, pstate_nominal, pstate_max); pr_info("Workload Optimized Frequency is %s in the platform\n", (powernv_pstate_info.wof_enabled) ? "enabled" : "disabled"); @@ -278,19 +316,30 @@ next: powernv_pstate_info.nr_pstates = nr_pstates; pr_debug("NR PStates %d\n", nr_pstates); + for (i = 0; i < nr_pstates; i++) { u32 id = be32_to_cpu(pstate_ids[i]); u32 freq = be32_to_cpu(pstate_freqs[i]); + struct pstate_idx_revmap_data *revmap_data; + unsigned int key; pr_debug("PState id %d freq %d MHz\n", id, freq); powernv_freqs[i].frequency = freq * 1000; /* kHz */ - powernv_freqs[i].driver_data = id; + powernv_freqs[i].driver_data = id & 0xFF; + + revmap_data = (struct pstate_idx_revmap_data *) + kmalloc(sizeof(*revmap_data), GFP_KERNEL); + + revmap_data->pstate_id = id & 0xFF; + revmap_data->cpufreq_table_idx = i; + key = (revmap_data->pstate_id) % POWERNV_MAX_PSTATES; + hash_add(pstate_revmap, &revmap_data->hentry, key); if (id == pstate_max) powernv_pstate_info.max = i; - else if (id == pstate_nominal) + if (id == pstate_nominal) powernv_pstate_info.nominal = i; - else if (id == pstate_min) + if (id == pstate_min) powernv_pstate_info.min = i; if (powernv_pstate_info.wof_enabled && id == pstate_turbo) { @@ -307,14 +356,13 @@ next: } /* Returns the CPU frequency corresponding to the pstate_id. */ -static unsigned int pstate_id_to_freq(int pstate_id) +static unsigned int pstate_id_to_freq(u8 pstate_id) { int i; i = pstate_to_idx(pstate_id); if (i >= powernv_pstate_info.nr_pstates || i < 0) { - pr_warn("PState id %d outside of PState table, " - "reporting nominal id %d instead\n", + pr_warn("PState id 0x%x outside of PState table, reporting nominal id 0x%x instead\n", pstate_id, idx_to_pstate(powernv_pstate_info.nominal)); i = powernv_pstate_info.nominal; } @@ -420,8 +468,8 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val) */ struct powernv_smp_call_data { unsigned int freq; - int pstate_id; - int gpstate_id; + u8 pstate_id; + u8 gpstate_id; }; /* @@ -438,22 +486,15 @@ struct powernv_smp_call_data { static void powernv_read_cpu_freq(void *arg) { unsigned long pmspr_val; - s8 local_pstate_id; struct powernv_smp_call_data *freq_data = arg; pmspr_val = get_pmspr(SPRN_PMSR); - - /* - * The local pstate id corresponds bits 48..55 in the PMSR. - * Note: Watch out for the sign! - */ - local_pstate_id = (pmspr_val >> 48) & 0xFF; - freq_data->pstate_id = local_pstate_id; + freq_data->pstate_id = extract_local_pstate(pmspr_val); freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); - pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n", - raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, - freq_data->freq); + pr_debug("cpu %d pmsr %016lX pstate_id 0x%x frequency %d kHz\n", + raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, + freq_data->freq); } /* @@ -515,21 +556,21 @@ static void powernv_cpufreq_throttle_check(void *data) struct chip *chip; unsigned int cpu = smp_processor_id(); unsigned long pmsr; - int pmsr_pmax; + u8 pmsr_pmax; unsigned int pmsr_pmax_idx; pmsr = get_pmspr(SPRN_PMSR); chip = this_cpu_read(chip_info); /* Check for Pmax Capping */ - pmsr_pmax = (s8)PMSR_MAX(pmsr); + pmsr_pmax = extract_max_pstate(pmsr); pmsr_pmax_idx = pstate_to_idx(pmsr_pmax); if (pmsr_pmax_idx != powernv_pstate_info.max) { if (chip->throttled) goto next; chip->throttled = true; if (pmsr_pmax_idx > powernv_pstate_info.nominal) { - pr_warn_once("CPU %d on Chip %u has Pmax(%d) reduced below nominal frequency(%d)\n", + pr_warn_once("CPU %d on Chip %u has Pmax(0x%x) reduced below that of nominal frequency(0x%x)\n", cpu, chip->id, pmsr_pmax, idx_to_pstate(powernv_pstate_info.nominal)); chip->throttle_sub_turbo++; @@ -645,8 +686,8 @@ void gpstate_timer_handler(struct timer_list *t) * value. Hence, read from PMCR to get correct data. */ val = get_pmspr(SPRN_PMCR); - freq_data.gpstate_id = (s8)GET_GPSTATE(val); - freq_data.pstate_id = (s8)GET_LPSTATE(val); + freq_data.gpstate_id = extract_global_pstate(val); + freq_data.pstate_id = extract_local_pstate(val); if (freq_data.gpstate_id == freq_data.pstate_id) { reset_gpstates(policy); spin_unlock(&gpstates->gpstate_lock); diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c index 4ada55b8856e..0562761a3dec 100644 --- a/drivers/cpufreq/qoriq-cpufreq.c +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -275,20 +275,8 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy, static void qoriq_cpufreq_ready(struct cpufreq_policy *policy) { struct cpu_data *cpud = policy->driver_data; - struct device_node *np = of_get_cpu_node(policy->cpu, NULL); - if (of_find_property(np, "#cooling-cells", NULL)) { - cpud->cdev = of_cpufreq_cooling_register(np, policy); - - if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) { - pr_err("cpu%d is not running as cooling device: %ld\n", - policy->cpu, PTR_ERR(cpud->cdev)); - - cpud->cdev = NULL; - } - } - - of_node_put(np); + cpud->cdev = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver qoriq_cpufreq_driver = { diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 05d299052c5c..247fcbfa4cb5 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -18,27 +18,89 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/cpu_cooling.h> +#include <linux/export.h> #include <linux/module.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/pm_opp.h> #include <linux/scpi_protocol.h> +#include <linux/slab.h> #include <linux/types.h> -#include "arm_big_little.h" +struct scpi_data { + struct clk *clk; + struct device *cpu_dev; + struct thermal_cooling_device *cdev; +}; static struct scpi_ops *scpi_ops; -static int scpi_get_transition_latency(struct device *cpu_dev) +static unsigned int scpi_cpufreq_get_rate(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + struct scpi_data *priv = policy->driver_data; + unsigned long rate = clk_get_rate(priv->clk); + + return rate / 1000; +} + +static int +scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct scpi_data *priv = policy->driver_data; + u64 rate = policy->freq_table[index].frequency * 1000; + int ret; + + ret = clk_set_rate(priv->clk, rate); + if (!ret && (clk_get_rate(priv->clk) != rate)) + ret = -EIO; + + return ret; +} + +static int +scpi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - return scpi_ops->get_transition_latency(cpu_dev); + int cpu, domain, tdomain; + struct device *tcpu_dev; + + domain = scpi_ops->device_domain_id(cpu_dev); + if (domain < 0) + return domain; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) + continue; + + tdomain = scpi_ops->device_domain_id(tcpu_dev); + if (tdomain == domain) + cpumask_set_cpu(cpu, cpumask); + } + + return 0; } -static int scpi_init_opp_table(const struct cpumask *cpumask) +static int scpi_cpufreq_init(struct cpufreq_policy *policy) { int ret; - struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask)); + unsigned int latency; + struct device *cpu_dev; + struct scpi_data *priv; + struct cpufreq_frequency_table *freq_table; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", policy->cpu); + return -ENODEV; + } ret = scpi_ops->add_opps_to_device(cpu_dev); if (ret) { @@ -46,32 +108,133 @@ static int scpi_init_opp_table(const struct cpumask *cpumask) return ret; } - ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask); - if (ret) + ret = scpi_get_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); + return ret; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); + return ret; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); + ret = -EPROBE_DEFER; + goto out_free_opp; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_opp; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_free_priv; + } + + priv->cpu_dev = cpu_dev; + priv->clk = clk_get(cpu_dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d\n", + __func__, cpu_dev->id); + goto out_free_cpufreq_table; + } + + policy->driver_data = priv; + + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, + ret); + goto out_put_clk; + } + + /* scpi allows DVFS request for any domain from any CPU */ + policy->dvfs_possible_from_any_cpu = true; + + latency = scpi_ops->get_transition_latency(cpu_dev); + if (!latency) + latency = CPUFREQ_ETERNAL; + + policy->cpuinfo.transition_latency = latency; + + policy->fast_switch_possible = false; + return 0; + +out_put_clk: + clk_put(priv->clk); +out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_priv: + kfree(priv); +out_free_opp: + dev_pm_opp_cpumask_remove_table(policy->cpus); + return ret; } -static const struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { - .name = "scpi", - .get_transition_latency = scpi_get_transition_latency, - .init_opp_table = scpi_init_opp_table, - .free_opp_table = dev_pm_opp_cpumask_remove_table, +static int scpi_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct scpi_data *priv = policy->driver_data; + + cpufreq_cooling_unregister(priv->cdev); + clk_put(priv->clk); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + kfree(priv); + dev_pm_opp_cpumask_remove_table(policy->related_cpus); + + return 0; +} + +static void scpi_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct scpi_data *priv = policy->driver_data; + struct thermal_cooling_device *cdev; + + cdev = of_cpufreq_cooling_register(policy); + if (!IS_ERR(cdev)) + priv->cdev = cdev; +} + +static struct cpufreq_driver scpi_cpufreq_driver = { + .name = "scpi-cpufreq", + .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .attr = cpufreq_generic_attr, + .get = scpi_cpufreq_get_rate, + .init = scpi_cpufreq_init, + .exit = scpi_cpufreq_exit, + .ready = scpi_cpufreq_ready, + .target_index = scpi_cpufreq_set_target, }; static int scpi_cpufreq_probe(struct platform_device *pdev) { + int ret; + scpi_ops = get_scpi_ops(); if (!scpi_ops) return -EIO; - return bL_cpufreq_register(&scpi_cpufreq_ops); + ret = cpufreq_register_driver(&scpi_cpufreq_driver); + if (ret) + dev_err(&pdev->dev, "%s: registering cpufreq failed, err: %d\n", + __func__, ret); + return ret; } static int scpi_cpufreq_remove(struct platform_device *pdev) { - bL_cpufreq_unregister(&scpi_cpufreq_ops); + cpufreq_unregister_driver(&scpi_cpufreq_driver); scpi_ops = NULL; return 0; } diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index 923317f03b4b..a099b7bf74cd 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -17,6 +17,7 @@ #include <linux/cpu.h> #include <linux/io.h> #include <linux/mfd/syscon.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data { unsigned long efuse_mask; unsigned long efuse_shift; unsigned long rev_offset; + bool multi_regulator; }; struct ti_cpufreq_data { @@ -57,6 +59,7 @@ struct ti_cpufreq_data { struct device_node *opp_node; struct regmap *syscon; const struct ti_cpufreq_soc_data *soc_data; + struct opp_table *opp_table; }; static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, @@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = { .efuse_offset = 0x07fc, .efuse_mask = 0x1fff, .rev_offset = 0x600, + .multi_regulator = false, }; static struct ti_cpufreq_soc_data am4x_soc_data = { @@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = { .efuse_offset = 0x0610, .efuse_mask = 0x3f, .rev_offset = 0x600, + .multi_regulator = false, }; static struct ti_cpufreq_soc_data dra7_soc_data = { @@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = { .efuse_mask = 0xf80000, .efuse_shift = 19, .rev_offset = 0x204, + .multi_regulator = true, }; /** @@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = { {}, }; -static int ti_cpufreq_init(void) +static int ti_cpufreq_probe(struct platform_device *pdev) { u32 version[VERSION_COUNT]; struct device_node *np; const struct of_device_id *match; + struct opp_table *ti_opp_table; struct ti_cpufreq_data *opp_data; + const char * const reg_names[] = {"vdd", "vbb"}; int ret; np = of_find_node_by_path("/"); @@ -247,16 +255,29 @@ static int ti_cpufreq_init(void) if (ret) goto fail_put_node; - ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev, - version, VERSION_COUNT)); - if (ret) { + ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev, + version, VERSION_COUNT); + if (IS_ERR(ti_opp_table)) { dev_err(opp_data->cpu_dev, "Failed to set supported hardware\n"); + ret = PTR_ERR(ti_opp_table); goto fail_put_node; } - of_node_put(opp_data->opp_node); + opp_data->opp_table = ti_opp_table; + + if (opp_data->soc_data->multi_regulator) { + ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev, + reg_names, + ARRAY_SIZE(reg_names)); + if (IS_ERR(ti_opp_table)) { + dev_pm_opp_put_supported_hw(opp_data->opp_table); + ret = PTR_ERR(ti_opp_table); + goto fail_put_node; + } + } + of_node_put(opp_data->opp_node); register_cpufreq_dt: platform_device_register_simple("cpufreq-dt", -1, NULL, 0); @@ -269,4 +290,22 @@ free_opp_data: return ret; } -device_initcall(ti_cpufreq_init); + +static int ti_cpufreq_init(void) +{ + platform_device_register_simple("ti-cpufreq", -1, NULL, 0); + return 0; +} +module_init(ti_cpufreq_init); + +static struct platform_driver ti_cpufreq_driver = { + .probe = ti_cpufreq_probe, + .driver = { + .name = "ti-cpufreq", + }, +}; +module_platform_driver(ti_cpufreq_driver); + +MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver"); +MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c index 4e78263e34a4..5d359aff3cc5 100644 --- a/drivers/cpuidle/governor.c +++ b/drivers/cpuidle/governor.c @@ -36,14 +36,15 @@ static struct cpuidle_governor * __cpuidle_find_governor(const char *str) /** * cpuidle_switch_governor - changes the governor * @gov: the new target governor - * - * NOTE: "gov" can be NULL to specify disabled * Must be called with cpuidle_lock acquired. */ int cpuidle_switch_governor(struct cpuidle_governor *gov) { struct cpuidle_device *dev; + if (!gov) + return -EINVAL; + if (gov == cpuidle_curr_governor) return 0; diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 78fb496ecb4e..fe2af6aa88fc 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -737,7 +737,7 @@ struct devfreq *devm_devfreq_add_device(struct device *dev, devfreq = devfreq_add_device(dev, profile, governor_name, data); if (IS_ERR(devfreq)) { devres_free(ptr); - return ERR_PTR(-ENOMEM); + return devfreq; } *ptr = devfreq; @@ -996,7 +996,8 @@ static ssize_t governor_store(struct device *dev, struct device_attribute *attr, if (df->governor == governor) { ret = 0; goto out; - } else if (df->governor->immutable || governor->immutable) { + } else if ((df->governor && df->governor->immutable) || + governor->immutable) { ret = -EINVAL; goto out; } diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 2b2c7db3e480..35c3936edc45 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1615,22 +1615,6 @@ static struct dma_chan *rcar_dmac_of_xlate(struct of_phandle_args *dma_spec, * Power management */ -#ifdef CONFIG_PM_SLEEP -static int rcar_dmac_sleep_suspend(struct device *dev) -{ - /* - * TODO: Wait for the current transfer to complete and stop the device. - */ - return 0; -} - -static int rcar_dmac_sleep_resume(struct device *dev) -{ - /* TODO: Resume transfers, if any. */ - return 0; -} -#endif - #ifdef CONFIG_PM static int rcar_dmac_runtime_suspend(struct device *dev) { @@ -1646,7 +1630,13 @@ static int rcar_dmac_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops rcar_dmac_pm = { - SET_SYSTEM_SLEEP_PM_OPS(rcar_dmac_sleep_suspend, rcar_dmac_sleep_resume) + /* + * TODO for system sleep/resume: + * - Wait for the current transfer to complete and stop the device, + * - Resume transfers, if any. + */ + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) SET_RUNTIME_PM_OPS(rcar_dmac_runtime_suspend, rcar_dmac_runtime_resume, NULL) }; diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c index f3f4f810e5df..bb1c068bff19 100644 --- a/drivers/firmware/psci_checker.c +++ b/drivers/firmware/psci_checker.c @@ -77,8 +77,8 @@ static int psci_ops_check(void) return 0; } -static int find_clusters(const struct cpumask *cpus, - const struct cpumask **clusters) +static int find_cpu_groups(const struct cpumask *cpus, + const struct cpumask **cpu_groups) { unsigned int nb = 0; cpumask_var_t tmp; @@ -88,11 +88,11 @@ static int find_clusters(const struct cpumask *cpus, cpumask_copy(tmp, cpus); while (!cpumask_empty(tmp)) { - const struct cpumask *cluster = + const struct cpumask *cpu_group = topology_core_cpumask(cpumask_any(tmp)); - clusters[nb++] = cluster; - cpumask_andnot(tmp, tmp, cluster); + cpu_groups[nb++] = cpu_group; + cpumask_andnot(tmp, tmp, cpu_group); } free_cpumask_var(tmp); @@ -170,24 +170,24 @@ static int hotplug_tests(void) { int err; cpumask_var_t offlined_cpus; - int i, nb_cluster; - const struct cpumask **clusters; + int i, nb_cpu_group; + const struct cpumask **cpu_groups; char *page_buf; err = -ENOMEM; if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL)) return err; - /* We may have up to nb_available_cpus clusters. */ - clusters = kmalloc_array(nb_available_cpus, sizeof(*clusters), - GFP_KERNEL); - if (!clusters) + /* We may have up to nb_available_cpus cpu_groups. */ + cpu_groups = kmalloc_array(nb_available_cpus, sizeof(*cpu_groups), + GFP_KERNEL); + if (!cpu_groups) goto out_free_cpus; page_buf = (char *)__get_free_page(GFP_KERNEL); if (!page_buf) - goto out_free_clusters; + goto out_free_cpu_groups; err = 0; - nb_cluster = find_clusters(cpu_online_mask, clusters); + nb_cpu_group = find_cpu_groups(cpu_online_mask, cpu_groups); /* * Of course the last CPU cannot be powered down and cpu_down() should @@ -197,24 +197,22 @@ static int hotplug_tests(void) err += down_and_up_cpus(cpu_online_mask, offlined_cpus); /* - * Take down CPUs by cluster this time. When the last CPU is turned - * off, the cluster itself should shut down. + * Take down CPUs by cpu group this time. When the last CPU is turned + * off, the cpu group itself should shut down. */ - for (i = 0; i < nb_cluster; ++i) { - int cluster_id = - topology_physical_package_id(cpumask_any(clusters[i])); + for (i = 0; i < nb_cpu_group; ++i) { ssize_t len = cpumap_print_to_pagebuf(true, page_buf, - clusters[i]); + cpu_groups[i]); /* Remove trailing newline. */ page_buf[len - 1] = '\0'; - pr_info("Trying to turn off and on again cluster %d " - "(CPUs %s)\n", cluster_id, page_buf); - err += down_and_up_cpus(clusters[i], offlined_cpus); + pr_info("Trying to turn off and on again group %d (CPUs %s)\n", + i, page_buf); + err += down_and_up_cpus(cpu_groups[i], offlined_cpus); } free_page((unsigned long)page_buf); -out_free_clusters: - kfree(clusters); +out_free_cpu_groups: + kfree(cpu_groups); out_free_cpus: free_cpumask_var(offlined_cpus); return err; diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 21bf619a86c5..9fee4c054d3d 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -280,8 +280,6 @@ struct dw_i2c_dev { int (*acquire_lock)(struct dw_i2c_dev *dev); void (*release_lock)(struct dw_i2c_dev *dev); bool pm_disabled; - bool suspended; - bool skip_resume; void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 58add69a441c..153b947702c5 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -42,6 +42,7 @@ #include <linux/reset.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/suspend.h> #include "i2c-designware-core.h" @@ -372,6 +373,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->dev.of_node = pdev->dev.of_node; + dev_pm_set_driver_flags(&pdev->dev, + DPM_FLAG_SMART_PREPARE | + DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED); + /* The code below assumes runtime PM to be disabled. */ WARN_ON(pm_runtime_enabled(&pdev->dev)); @@ -435,12 +441,24 @@ MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #ifdef CONFIG_PM_SLEEP static int dw_i2c_plat_prepare(struct device *dev) { - return pm_runtime_suspended(dev); + /* + * If the ACPI companion device object is present for this device, it + * may be accessed during suspend and resume of other devices via I2C + * operation regions, so tell the PM core and middle layers to avoid + * skipping system suspend/resume callbacks for it in that case. + */ + return !has_acpi_companion(dev); } static void dw_i2c_plat_complete(struct device *dev) { - if (dev->power.direct_complete) + /* + * The device can only be in runtime suspend at this point if it has not + * been resumed throughout the ending system suspend/resume cycle, so if + * the platform firmware might mess up with it, request the runtime PM + * framework to resume it. + */ + if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) pm_request_resume(dev); } #else @@ -453,16 +471,9 @@ static int dw_i2c_plat_suspend(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - if (i_dev->suspended) { - i_dev->skip_resume = true; - return 0; - } - i_dev->disable(i_dev); i2c_dw_plat_prepare_clk(i_dev, false); - i_dev->suspended = true; - return 0; } @@ -470,19 +481,9 @@ static int dw_i2c_plat_resume(struct device *dev) { struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - if (!i_dev->suspended) - return 0; - - if (i_dev->skip_resume) { - i_dev->skip_resume = false; - return 0; - } - i2c_dw_plat_prepare_clk(i_dev, true); i_dev->init(i_dev); - i_dev->suspended = false; - return 0; } diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index 0e0ab9bb1530..9e545eb6e8b4 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -450,6 +450,8 @@ int intel_lpss_probe(struct device *dev, if (ret) goto err_remove_ltr; + dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND); + return 0; err_remove_ltr: @@ -478,7 +480,9 @@ EXPORT_SYMBOL_GPL(intel_lpss_remove); static int resume_lpss_device(struct device *dev, void *data) { - pm_runtime_resume(dev); + if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND)) + pm_runtime_resume(dev); + return 0; } diff --git a/drivers/opp/Makefile b/drivers/opp/Makefile index e70ceb406fe9..6ce6aefacc81 100644 --- a/drivers/opp/Makefile +++ b/drivers/opp/Makefile @@ -2,3 +2,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG obj-y += core.o cpu.o obj-$(CONFIG_OF) += of.o obj-$(CONFIG_DEBUG_FS) += debugfs.o +obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-opp-supply.o diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c new file mode 100644 index 000000000000..370eff3acd8a --- /dev/null +++ b/drivers/opp/ti-opp-supply.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon <nm@ti.com> + * Dave Gerlach <d-gerlach@ti.com> + * + * TI OPP supply driver that provides override into the regulator control + * for generic opp core to handle devices with ABB regulator and/or + * SmartReflex Class0. + */ +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +/** + * struct ti_opp_supply_optimum_voltage_table - optimized voltage table + * @reference_uv: reference voltage (usually Nominal voltage) + * @optimized_uv: Optimized voltage from efuse + */ +struct ti_opp_supply_optimum_voltage_table { + unsigned int reference_uv; + unsigned int optimized_uv; +}; + +/** + * struct ti_opp_supply_data - OMAP specific opp supply data + * @vdd_table: Optimized voltage mapping table + * @num_vdd_table: number of entries in vdd_table + * @vdd_absolute_max_voltage_uv: absolute maximum voltage in UV for the supply + */ +struct ti_opp_supply_data { + struct ti_opp_supply_optimum_voltage_table *vdd_table; + u32 num_vdd_table; + u32 vdd_absolute_max_voltage_uv; +}; + +static struct ti_opp_supply_data opp_data; + +/** + * struct ti_opp_supply_of_data - device tree match data + * @flags: specific type of opp supply + * @efuse_voltage_mask: mask required for efuse register representing voltage + * @efuse_voltage_uv: Are the efuse entries in micro-volts? if not, assume + * milli-volts. + */ +struct ti_opp_supply_of_data { +#define OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE BIT(1) +#define OPPDM_HAS_NO_ABB BIT(2) + const u8 flags; + const u32 efuse_voltage_mask; + const bool efuse_voltage_uv; +}; + +/** + * _store_optimized_voltages() - store optimized voltages + * @dev: ti opp supply device for which we need to store info + * @data: data specific to the device + * + * Picks up efuse based optimized voltages for VDD unique per device and + * stores it in internal data structure for use during transition requests. + * + * Return: If successful, 0, else appropriate error value. + */ +static int _store_optimized_voltages(struct device *dev, + struct ti_opp_supply_data *data) +{ + void __iomem *base; + struct property *prop; + struct resource *res; + const __be32 *val; + int proplen, i; + int ret = 0; + struct ti_opp_supply_optimum_voltage_table *table; + const struct ti_opp_supply_of_data *of_data = dev_get_drvdata(dev); + + /* pick up Efuse based voltages */ + res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Unable to get IO resource\n"); + ret = -ENODEV; + goto out_map; + } + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "Unable to map Efuse registers\n"); + ret = -ENOMEM; + goto out_map; + } + + /* Fetch efuse-settings. */ + prop = of_find_property(dev->of_node, "ti,efuse-settings", NULL); + if (!prop) { + dev_err(dev, "No 'ti,efuse-settings' property found\n"); + ret = -EINVAL; + goto out; + } + + proplen = prop->length / sizeof(int); + data->num_vdd_table = proplen / 2; + /* Verify for corrupted OPP entries in dt */ + if (data->num_vdd_table * 2 * sizeof(int) != prop->length) { + dev_err(dev, "Invalid 'ti,efuse-settings'\n"); + ret = -EINVAL; + goto out; + } + + ret = of_property_read_u32(dev->of_node, "ti,absolute-max-voltage-uv", + &data->vdd_absolute_max_voltage_uv); + if (ret) { + dev_err(dev, "ti,absolute-max-voltage-uv is missing\n"); + ret = -EINVAL; + goto out; + } + + table = kzalloc(sizeof(*data->vdd_table) * + data->num_vdd_table, GFP_KERNEL); + if (!table) { + ret = -ENOMEM; + goto out; + } + data->vdd_table = table; + + val = prop->value; + for (i = 0; i < data->num_vdd_table; i++, table++) { + u32 efuse_offset; + u32 tmp; + + table->reference_uv = be32_to_cpup(val++); + efuse_offset = be32_to_cpup(val++); + + tmp = readl(base + efuse_offset); + tmp &= of_data->efuse_voltage_mask; + tmp >>= __ffs(of_data->efuse_voltage_mask); + + table->optimized_uv = of_data->efuse_voltage_uv ? tmp : + tmp * 1000; + + dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d vset=%d\n", + i, efuse_offset, table->reference_uv, + table->optimized_uv); + + /* + * Some older samples might not have optimized efuse + * Use reference voltage for those - just add debug message + * for them. + */ + if (!table->optimized_uv) { + dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d:vset0\n", + i, efuse_offset, table->reference_uv); + table->optimized_uv = table->reference_uv; + } + } +out: + iounmap(base); +out_map: + return ret; +} + +/** + * _free_optimized_voltages() - free resources for optvoltages + * @dev: device for which we need to free info + * @data: data specific to the device + */ +static void _free_optimized_voltages(struct device *dev, + struct ti_opp_supply_data *data) +{ + kfree(data->vdd_table); + data->vdd_table = NULL; + data->num_vdd_table = 0; +} + +/** + * _get_optimal_vdd_voltage() - Finds optimal voltage for the supply + * @dev: device for which we need to find info + * @data: data specific to the device + * @reference_uv: reference voltage (OPP voltage) for which we need value + * + * Return: if a match is found, return optimized voltage, else return + * reference_uv, also return reference_uv if no optimization is needed. + */ +static int _get_optimal_vdd_voltage(struct device *dev, + struct ti_opp_supply_data *data, + int reference_uv) +{ + int i; + struct ti_opp_supply_optimum_voltage_table *table; + + if (!data->num_vdd_table) + return reference_uv; + + table = data->vdd_table; + if (!table) + return -EINVAL; + + /* Find a exact match - this list is usually very small */ + for (i = 0; i < data->num_vdd_table; i++, table++) + if (table->reference_uv == reference_uv) + return table->optimized_uv; + + /* IF things are screwed up, we'd make a mess on console.. ratelimit */ + dev_err_ratelimited(dev, "%s: Failed optimized voltage match for %d\n", + __func__, reference_uv); + return reference_uv; +} + +static int _opp_set_voltage(struct device *dev, + struct dev_pm_opp_supply *supply, + int new_target_uv, struct regulator *reg, + char *reg_name) +{ + int ret; + unsigned long vdd_uv, uv_max; + + if (new_target_uv) + vdd_uv = new_target_uv; + else + vdd_uv = supply->u_volt; + + /* + * If we do have an absolute max voltage specified, then we should + * use that voltage instead to allow for cases where the voltage rails + * are ganged (example if we set the max for an opp as 1.12v, and + * the absolute max is 1.5v, for another rail to get 1.25v, it cannot + * be achieved if the regulator is constrainted to max of 1.12v, even + * if it can function at 1.25v + */ + if (opp_data.vdd_absolute_max_voltage_uv) + uv_max = opp_data.vdd_absolute_max_voltage_uv; + else + uv_max = supply->u_volt_max; + + if (vdd_uv > uv_max || + vdd_uv < supply->u_volt_min || + supply->u_volt_min > uv_max) { + dev_warn(dev, + "Invalid range voltages [Min:%lu target:%lu Max:%lu]\n", + supply->u_volt_min, vdd_uv, uv_max); + return -EINVAL; + } + + dev_dbg(dev, "%s scaling to %luuV[min %luuV max %luuV]\n", reg_name, + vdd_uv, supply->u_volt_min, + uv_max); + + ret = regulator_set_voltage_triplet(reg, + supply->u_volt_min, + vdd_uv, + uv_max); + if (ret) { + dev_err(dev, "%s failed for %luuV[min %luuV max %luuV]\n", + reg_name, vdd_uv, supply->u_volt_min, + uv_max); + return ret; + } + + return 0; +} + +/** + * ti_opp_supply_set_opp() - do the opp supply transition + * @data: information on regulators and new and old opps provided by + * opp core to use in transition + * + * Return: If successful, 0, else appropriate error value. + */ +static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) +{ + struct dev_pm_opp_supply *old_supply_vdd = &data->old_opp.supplies[0]; + struct dev_pm_opp_supply *old_supply_vbb = &data->old_opp.supplies[1]; + struct dev_pm_opp_supply *new_supply_vdd = &data->new_opp.supplies[0]; + struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1]; + struct device *dev = data->dev; + unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; + struct clk *clk = data->clk; + struct regulator *vdd_reg = data->regulators[0]; + struct regulator *vbb_reg = data->regulators[1]; + int vdd_uv; + int ret; + + vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, + new_supply_vbb->u_volt); + + /* Scaling up? Scale voltage before frequency */ + if (freq > old_freq) { + ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, + "vdd"); + if (ret) + goto restore_voltage; + + ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + goto restore_voltage; + } + + /* Change frequency */ + dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", + __func__, old_freq, freq); + + ret = clk_set_rate(clk, freq); + if (ret) { + dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, + ret); + goto restore_voltage; + } + + /* Scaling down? Scale voltage after frequency */ + if (freq < old_freq) { + ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + goto restore_freq; + + ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, + "vdd"); + if (ret) + goto restore_freq; + } + + return 0; + +restore_freq: + ret = clk_set_rate(clk, old_freq); + if (ret) + dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", + __func__, old_freq); +restore_voltage: + /* This shouldn't harm even if the voltages weren't updated earlier */ + if (old_supply_vdd->u_volt) { + ret = _opp_set_voltage(dev, old_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + return ret; + + ret = _opp_set_voltage(dev, old_supply_vdd, 0, vdd_reg, + "vdd"); + if (ret) + return ret; + } + + return ret; +} + +static const struct ti_opp_supply_of_data omap_generic_of_data = { +}; + +static const struct ti_opp_supply_of_data omap_omap5_of_data = { + .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE, + .efuse_voltage_mask = 0xFFF, + .efuse_voltage_uv = false, +}; + +static const struct ti_opp_supply_of_data omap_omap5core_of_data = { + .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE | OPPDM_HAS_NO_ABB, + .efuse_voltage_mask = 0xFFF, + .efuse_voltage_uv = false, +}; + +static const struct of_device_id ti_opp_supply_of_match[] = { + {.compatible = "ti,omap-opp-supply", .data = &omap_generic_of_data}, + {.compatible = "ti,omap5-opp-supply", .data = &omap_omap5_of_data}, + {.compatible = "ti,omap5-core-opp-supply", + .data = &omap_omap5core_of_data}, + {}, +}; +MODULE_DEVICE_TABLE(of, ti_opp_supply_of_match); + +static int ti_opp_supply_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *cpu_dev = get_cpu_device(0); + const struct of_device_id *match; + const struct ti_opp_supply_of_data *of_data; + int ret = 0; + + match = of_match_device(ti_opp_supply_of_match, dev); + if (!match) { + /* We do not expect this to happen */ + dev_err(dev, "%s: Unable to match device\n", __func__); + return -ENODEV; + } + if (!match->data) { + /* Again, unlikely.. but mistakes do happen */ + dev_err(dev, "%s: Bad data in match\n", __func__); + return -EINVAL; + } + of_data = match->data; + + dev_set_drvdata(dev, (void *)of_data); + + /* If we need optimized voltage */ + if (of_data->flags & OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE) { + ret = _store_optimized_voltages(dev, &opp_data); + if (ret) + return ret; + } + + ret = PTR_ERR_OR_ZERO(dev_pm_opp_register_set_opp_helper(cpu_dev, + ti_opp_supply_set_opp)); + if (ret) + _free_optimized_voltages(dev, &opp_data); + + return ret; +} + +static struct platform_driver ti_opp_supply_driver = { + .probe = ti_opp_supply_probe, + .driver = { + .name = "ti_opp_supply", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ti_opp_supply_of_match), + }, +}; +module_platform_driver(ti_opp_supply_driver); + +MODULE_DESCRIPTION("Texas Instruments OMAP OPP Supply driver"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 14fd865a5120..5958c8dda4e3 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -699,7 +699,7 @@ static void pci_pm_complete(struct device *dev) pm_generic_complete(dev); /* Resume device if platform firmware has put it in reset-power-on */ - if (dev->power.direct_complete && pm_resume_via_firmware()) { + if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) { pci_power_t pre_sleep_state = pci_dev->current_state; pci_update_current_state(pci_dev, pci_dev->current_state); @@ -783,8 +783,10 @@ static int pci_pm_suspend_noirq(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (dev_pm_smart_suspend_and_suspended(dev)) + if (dev_pm_smart_suspend_and_suspended(dev)) { + dev->power.may_skip_resume = true; return 0; + } if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend_late(dev, PMSG_SUSPEND); @@ -838,6 +840,16 @@ static int pci_pm_suspend_noirq(struct device *dev) Fixup: pci_fixup_device(pci_fixup_suspend_late, pci_dev); + /* + * If the target system sleep state is suspend-to-idle, it is sufficient + * to check whether or not the device's wakeup settings are good for + * runtime PM. Otherwise, the pm_resume_via_firmware() check will cause + * pci_pm_complete() to take care of fixing up the device's state + * anyway, if need be. + */ + dev->power.may_skip_resume = device_may_wakeup(dev) || + !device_can_wakeup(dev); + return 0; } @@ -847,6 +859,9 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + if (dev_pm_may_skip_resume(dev)) + return 0; + /* * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend * during system suspend, so update their runtime PM status to "active" @@ -953,7 +968,7 @@ static int pci_pm_freeze_late(struct device *dev) if (dev_pm_smart_suspend_and_suspended(dev)) return 0; - return pm_generic_freeze_late(dev);; + return pm_generic_freeze_late(dev); } static int pci_pm_freeze_noirq(struct device *dev) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index ffbf4e723527..fb1c1bb87316 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -150,6 +150,9 @@ static int pcie_portdrv_probe(struct pci_dev *dev, pci_save_state(dev); + dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED); + if (pci_bridge_d3_possible(dev)) { /* * Keep the port resumed 100ms to make sure things like diff --git a/drivers/platform/x86/surfacepro3_button.c b/drivers/platform/x86/surfacepro3_button.c index 6505c97705e1..1b491690ce07 100644 --- a/drivers/platform/x86/surfacepro3_button.c +++ b/drivers/platform/x86/surfacepro3_button.c @@ -119,7 +119,7 @@ static void surface_button_notify(struct acpi_device *device, u32 event) if (key_code == KEY_RESERVED) return; if (pressed) - pm_wakeup_event(&device->dev, 0); + pm_wakeup_dev_event(&device->dev, 0, button->suspended); if (button->suspended) return; input_report_key(input, key_code, pressed?1:0); @@ -185,6 +185,8 @@ static int surface_button_add(struct acpi_device *device) error = input_register_device(input); if (error) goto err_free_input; + + device_init_wakeup(&device->dev, true); dev_info(&device->dev, "%s [%s]\n", name, acpi_device_bid(device)); return 0; diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c index 75f63e38a8d1..ed2b109ae8fc 100644 --- a/drivers/power/avs/rockchip-io-domain.c +++ b/drivers/power/avs/rockchip-io-domain.c @@ -76,7 +76,7 @@ struct rockchip_iodomain_supply { struct rockchip_iodomain { struct device *dev; struct regmap *grf; - struct rockchip_iodomain_soc_data *soc_data; + const struct rockchip_iodomain_soc_data *soc_data; struct rockchip_iodomain_supply supplies[MAX_SUPPLIES]; }; @@ -382,43 +382,43 @@ static const struct rockchip_iodomain_soc_data soc_data_rv1108_pmu = { static const struct of_device_id rockchip_iodomain_match[] = { { .compatible = "rockchip,rk3188-io-voltage-domain", - .data = (void *)&soc_data_rk3188 + .data = &soc_data_rk3188 }, { .compatible = "rockchip,rk3228-io-voltage-domain", - .data = (void *)&soc_data_rk3228 + .data = &soc_data_rk3228 }, { .compatible = "rockchip,rk3288-io-voltage-domain", - .data = (void *)&soc_data_rk3288 + .data = &soc_data_rk3288 }, { .compatible = "rockchip,rk3328-io-voltage-domain", - .data = (void *)&soc_data_rk3328 + .data = &soc_data_rk3328 }, { .compatible = "rockchip,rk3368-io-voltage-domain", - .data = (void *)&soc_data_rk3368 + .data = &soc_data_rk3368 }, { .compatible = "rockchip,rk3368-pmu-io-voltage-domain", - .data = (void *)&soc_data_rk3368_pmu + .data = &soc_data_rk3368_pmu }, { .compatible = "rockchip,rk3399-io-voltage-domain", - .data = (void *)&soc_data_rk3399 + .data = &soc_data_rk3399 }, { .compatible = "rockchip,rk3399-pmu-io-voltage-domain", - .data = (void *)&soc_data_rk3399_pmu + .data = &soc_data_rk3399_pmu }, { .compatible = "rockchip,rv1108-io-voltage-domain", - .data = (void *)&soc_data_rv1108 + .data = &soc_data_rv1108 }, { .compatible = "rockchip,rv1108-pmu-io-voltage-domain", - .data = (void *)&soc_data_rv1108_pmu + .data = &soc_data_rv1108_pmu }, { /* sentinel */ }, }; @@ -443,7 +443,7 @@ static int rockchip_iodomain_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iod); match = of_match_node(rockchip_iodomain_match, np); - iod->soc_data = (struct rockchip_iodomain_soc_data *)match->data; + iod->soc_data = match->data; parent = pdev->dev.parent; if (parent && parent->of_node) { diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index d1694f1def72..35636e1d8a3d 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -29,6 +29,7 @@ #include <linux/sysfs.h> #include <linux/cpu.h> #include <linux/powercap.h> +#include <linux/suspend.h> #include <asm/iosf_mbi.h> #include <asm/processor.h> @@ -155,6 +156,7 @@ struct rapl_power_limit { int prim_id; /* primitive ID used to enable */ struct rapl_domain *domain; const char *name; + u64 last_power_limit; }; static const char pl1_name[] = "long_term"; @@ -1209,7 +1211,7 @@ static int rapl_package_register_powercap(struct rapl_package *rp) struct rapl_domain *rd; char dev_name[17]; /* max domain name = 7 + 1 + 8 for int + 1 for null*/ struct powercap_zone *power_zone = NULL; - int nr_pl, ret;; + int nr_pl, ret; /* Update the domain data of the new package */ rapl_update_domain_data(rp); @@ -1533,6 +1535,92 @@ static int rapl_cpu_down_prep(unsigned int cpu) static enum cpuhp_state pcap_rapl_online; +static void power_limit_state_save(void) +{ + struct rapl_package *rp; + struct rapl_domain *rd; + int nr_pl, ret, i; + + get_online_cpus(); + list_for_each_entry(rp, &rapl_packages, plist) { + if (!rp->power_zone) + continue; + rd = power_zone_to_rapl_domain(rp->power_zone); + nr_pl = find_nr_power_limit(rd); + for (i = 0; i < nr_pl; i++) { + switch (rd->rpl[i].prim_id) { + case PL1_ENABLE: + ret = rapl_read_data_raw(rd, + POWER_LIMIT1, + true, + &rd->rpl[i].last_power_limit); + if (ret) + rd->rpl[i].last_power_limit = 0; + break; + case PL2_ENABLE: + ret = rapl_read_data_raw(rd, + POWER_LIMIT2, + true, + &rd->rpl[i].last_power_limit); + if (ret) + rd->rpl[i].last_power_limit = 0; + break; + } + } + } + put_online_cpus(); +} + +static void power_limit_state_restore(void) +{ + struct rapl_package *rp; + struct rapl_domain *rd; + int nr_pl, i; + + get_online_cpus(); + list_for_each_entry(rp, &rapl_packages, plist) { + if (!rp->power_zone) + continue; + rd = power_zone_to_rapl_domain(rp->power_zone); + nr_pl = find_nr_power_limit(rd); + for (i = 0; i < nr_pl; i++) { + switch (rd->rpl[i].prim_id) { + case PL1_ENABLE: + if (rd->rpl[i].last_power_limit) + rapl_write_data_raw(rd, + POWER_LIMIT1, + rd->rpl[i].last_power_limit); + break; + case PL2_ENABLE: + if (rd->rpl[i].last_power_limit) + rapl_write_data_raw(rd, + POWER_LIMIT2, + rd->rpl[i].last_power_limit); + break; + } + } + } + put_online_cpus(); +} + +static int rapl_pm_callback(struct notifier_block *nb, + unsigned long mode, void *_unused) +{ + switch (mode) { + case PM_SUSPEND_PREPARE: + power_limit_state_save(); + break; + case PM_POST_SUSPEND: + power_limit_state_restore(); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block rapl_pm_notifier = { + .notifier_call = rapl_pm_callback, +}; + static int __init rapl_init(void) { const struct x86_cpu_id *id; @@ -1560,8 +1648,16 @@ static int __init rapl_init(void) /* Don't bail out if PSys is not supported */ rapl_register_psys(); + + ret = register_pm_notifier(&rapl_pm_notifier); + if (ret) + goto err_unreg_all; + return 0; +err_unreg_all: + cpuhp_remove_state(pcap_rapl_online); + err_unreg: rapl_unregister_powercap(); return ret; @@ -1569,6 +1665,7 @@ err_unreg: static void __exit rapl_exit(void) { + unregister_pm_notifier(&rapl_pm_notifier); cpuhp_remove_state(pcap_rapl_online); rapl_unregister_powercap(); } diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c index 5b10b50f8686..64b2b2501a79 100644 --- a/drivers/powercap/powercap_sys.c +++ b/drivers/powercap/powercap_sys.c @@ -673,15 +673,13 @@ EXPORT_SYMBOL_GPL(powercap_unregister_control_type); static int __init powercap_init(void) { - int result = 0; + int result; result = seed_constraint_attributes(); if (result) return result; - result = class_register(&powercap_class); - - return result; + return class_register(&powercap_class); } device_initcall(powercap_init); diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 10ebb213ddb3..871ea582029e 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -26,6 +26,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/slab.h> +#include <linux/suspend.h> #include <scsi/scsi.h> #include "scsi_priv.h" #include <scsi/scsi_device.h> @@ -1009,11 +1010,20 @@ spi_dv_device(struct scsi_device *sdev) u8 *buffer; const int len = SPI_MAX_ECHO_BUFFER_SIZE*2; + /* + * Because this function and the power management code both call + * scsi_device_quiesce(), it is not safe to perform domain validation + * while suspend or resume is in progress. Hence the + * lock/unlock_system_sleep() calls. + */ + lock_system_sleep(); + if (unlikely(spi_dv_in_progress(starget))) - return; + goto unlock; if (unlikely(scsi_device_get(sdev))) - return; + goto unlock; + spi_dv_in_progress(starget) = 1; buffer = kzalloc(len, GFP_KERNEL); @@ -1049,6 +1059,8 @@ spi_dv_device(struct scsi_device *sdev) out_put: spi_dv_in_progress(starget) = 0; scsi_device_put(sdev); +unlock: + unlock_system_sleep(); } EXPORT_SYMBOL(spi_dv_device); diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index dc63aba092e4..dfd23245f778 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -88,7 +88,6 @@ struct time_in_idle { * @policy: cpufreq policy. * @node: list_head to link all cpufreq_cooling_device together. * @idle_time: idle time stats - * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered * cpufreq_cooling_device. @@ -104,7 +103,6 @@ struct cpufreq_cooling_device { struct cpufreq_policy *policy; struct list_head node; struct time_in_idle *idle_time; - get_static_t plat_get_static_power; }; static DEFINE_IDA(cpufreq_ida); @@ -319,60 +317,6 @@ static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu, } /** - * get_static_power() - calculate the static power consumed by the cpus - * @cpufreq_cdev: struct &cpufreq_cooling_device for this cpu cdev - * @tz: thermal zone device in which we're operating - * @freq: frequency in KHz - * @power: pointer in which to store the calculated static power - * - * Calculate the static power consumed by the cpus described by - * @cpu_actor running at frequency @freq. This function relies on a - * platform specific function that should have been provided when the - * actor was registered. If it wasn't, the static power is assumed to - * be negligible. The calculated static power is stored in @power. - * - * Return: 0 on success, -E* on failure. - */ -static int get_static_power(struct cpufreq_cooling_device *cpufreq_cdev, - struct thermal_zone_device *tz, unsigned long freq, - u32 *power) -{ - struct dev_pm_opp *opp; - unsigned long voltage; - struct cpufreq_policy *policy = cpufreq_cdev->policy; - struct cpumask *cpumask = policy->related_cpus; - unsigned long freq_hz = freq * 1000; - struct device *dev; - - if (!cpufreq_cdev->plat_get_static_power) { - *power = 0; - return 0; - } - - dev = get_cpu_device(policy->cpu); - WARN_ON(!dev); - - opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); - if (IS_ERR(opp)) { - dev_warn_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n", - freq_hz, PTR_ERR(opp)); - return -EINVAL; - } - - voltage = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (voltage == 0) { - dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n", - freq_hz); - return -EINVAL; - } - - return cpufreq_cdev->plat_get_static_power(cpumask, tz->passive_delay, - voltage, power); -} - -/** * get_dynamic_power() - calculate the dynamic power * @cpufreq_cdev: &cpufreq_cooling_device for this cdev * @freq: current frequency @@ -491,8 +435,8 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, u32 *power) { unsigned long freq; - int i = 0, cpu, ret; - u32 static_power, dynamic_power, total_load = 0; + int i = 0, cpu; + u32 total_load = 0; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; struct cpufreq_policy *policy = cpufreq_cdev->policy; u32 *load_cpu = NULL; @@ -522,22 +466,15 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, cpufreq_cdev->last_load = total_load; - dynamic_power = get_dynamic_power(cpufreq_cdev, freq); - ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); - if (ret) { - kfree(load_cpu); - return ret; - } + *power = get_dynamic_power(cpufreq_cdev, freq); if (load_cpu) { trace_thermal_power_cpu_get_power(policy->related_cpus, freq, - load_cpu, i, dynamic_power, - static_power); + load_cpu, i, *power); kfree(load_cpu); } - *power = static_power + dynamic_power; return 0; } @@ -561,8 +498,6 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, unsigned long state, u32 *power) { unsigned int freq, num_cpus; - u32 static_power, dynamic_power; - int ret; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; /* Request state should be less than max_level */ @@ -572,13 +507,9 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus); freq = cpufreq_cdev->freq_table[state].frequency; - dynamic_power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; - ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); - if (ret) - return ret; + *power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; - *power = static_power + dynamic_power; - return ret; + return 0; } /** @@ -606,21 +537,14 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, unsigned long *state) { unsigned int cur_freq, target_freq; - int ret; - s32 dyn_power; - u32 last_load, normalised_power, static_power; + u32 last_load, normalised_power; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; struct cpufreq_policy *policy = cpufreq_cdev->policy; cur_freq = cpufreq_quick_get(policy->cpu); - ret = get_static_power(cpufreq_cdev, tz, cur_freq, &static_power); - if (ret) - return ret; - - dyn_power = power - static_power; - dyn_power = dyn_power > 0 ? dyn_power : 0; + power = power > 0 ? power : 0; last_load = cpufreq_cdev->last_load ?: 1; - normalised_power = (dyn_power * 100) / last_load; + normalised_power = (power * 100) / last_load; target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power); *state = get_level(cpufreq_cdev, target_freq); @@ -671,8 +595,6 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, * @policy: cpufreq policy * Normally this should be same as cpufreq policy->related_cpus. * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -684,8 +606,7 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, u32 capacitance, - get_static_t plat_static_func) + struct cpufreq_policy *policy, u32 capacitance) { struct thermal_cooling_device *cdev; struct cpufreq_cooling_device *cpufreq_cdev; @@ -755,8 +676,6 @@ __cpufreq_cooling_register(struct device_node *np, } if (capacitance) { - cpufreq_cdev->plat_get_static_power = plat_static_func; - ret = update_freq_table(cpufreq_cdev, capacitance); if (ret) { cdev = ERR_PTR(ret); @@ -813,13 +732,12 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy) { - return __cpufreq_cooling_register(NULL, policy, 0, NULL); + return __cpufreq_cooling_register(NULL, policy, 0); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); /** * of_cpufreq_cooling_register - function to create cpufreq cooling device. - * @np: a valid struct device_node to the cooling device device tree node * @policy: cpufreq policy * * This interface function registers the cpufreq cooling device with the name @@ -827,86 +745,45 @@ EXPORT_SYMBOL_GPL(cpufreq_cooling_register); * cooling devices. Using this API, the cpufreq cooling device will be * linked to the device tree node provided. * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) -{ - if (!np) - return ERR_PTR(-EINVAL); - - return __cpufreq_cooling_register(np, policy, 0, NULL); -} -EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); - -/** - * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions - * @policy: cpufreq policy - * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) - * - * This interface function registers the cpufreq cooling device with - * the name "thermal-cpufreq-%x". This api can support multiple - * instances of cpufreq cooling devices. Using this function, the - * cooling device will implement the power extensions by using a - * simple cpu power model. The cpus must have registered their OPPs - * using the OPP library. - * - * An optional @plat_static_func may be provided to calculate the - * static power consumed by these cpus. If the platform's static - * power consumption is unknown or negligible, make it NULL. - * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, u32 capacitance, - get_static_t plat_static_func) -{ - return __cpufreq_cooling_register(NULL, policy, capacitance, - plat_static_func); -} -EXPORT_SYMBOL(cpufreq_power_cooling_register); - -/** - * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions - * @np: a valid struct device_node to the cooling device device tree node - * @policy: cpufreq policy - * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) - * - * This interface function registers the cpufreq cooling device with - * the name "thermal-cpufreq-%x". This api can support multiple - * instances of cpufreq cooling devices. Using this API, the cpufreq - * cooling device will be linked to the device tree node provided. * Using this function, the cooling device will implement the power * extensions by using a simple cpu power model. The cpus must have * registered their OPPs using the OPP library. * - * An optional @plat_static_func may be provided to calculate the - * static power consumed by these cpus. If the platform's static - * power consumption is unknown or negligible, make it NULL. + * It also takes into account, if property present in policy CPU node, the + * static power consumed by the cpu. * * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). + * and NULL on failure. */ struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) +of_cpufreq_cooling_register(struct cpufreq_policy *policy) { - if (!np) - return ERR_PTR(-EINVAL); + struct device_node *np = of_get_cpu_node(policy->cpu, NULL); + struct thermal_cooling_device *cdev = NULL; + u32 capacitance = 0; + + if (!np) { + pr_err("cpu_cooling: OF node not available for cpu%d\n", + policy->cpu); + return NULL; + } + + if (of_find_property(np, "#cooling-cells", NULL)) { + of_property_read_u32(np, "dynamic-power-coefficient", + &capacitance); - return __cpufreq_cooling_register(np, policy, capacitance, - plat_static_func); + cdev = __cpufreq_cooling_register(np, policy, capacitance); + if (IS_ERR(cdev)) { + pr_err("cpu_cooling: cpu%d is not running as cooling device: %ld\n", + policy->cpu, PTR_ERR(cdev)); + cdev = NULL; + } + } + + of_node_put(np); + return cdev; } -EXPORT_SYMBOL(of_cpufreq_power_cooling_register); +EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. diff --git a/include/linux/acpi.h b/include/linux/acpi.h index d918f1ea84e6..b8f4c3c776e5 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -451,6 +451,7 @@ void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); void __init acpi_nvs_nosave(void); void __init acpi_nvs_nosave_s3(void); +void __init acpi_sleep_no_blacklist(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index d4292ebc5c8b..de0dafb9399d 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -30,9 +30,6 @@ struct cpufreq_policy; -typedef int (*get_static_t)(cpumask_t *cpumask, int interval, - unsigned long voltage, u32 *power); - #ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. @@ -41,43 +38,6 @@ typedef int (*get_static_t)(cpumask_t *cpumask, int interval, struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy); -struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, - u32 capacitance, get_static_t plat_static_func); - -/** - * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. - * @np: a valid struct device_node to the cooling device device tree node. - * @policy: cpufreq policy. - */ -#ifdef CONFIG_THERMAL_OF -struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy); - -struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func); -#else -static inline struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) -{ - return ERR_PTR(-ENOSYS); -} - -static inline struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) -{ - return NULL; -} -#endif - /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. @@ -90,34 +50,27 @@ cpufreq_cooling_register(struct cpufreq_policy *policy) { return ERR_PTR(-ENOSYS); } -static inline struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, - u32 capacitance, get_static_t plat_static_func) -{ - return NULL; -} -static inline struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) +static inline +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { - return ERR_PTR(-ENOSYS); + return; } +#endif /* CONFIG_CPU_THERMAL */ +#if defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) +/** + * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. + * @policy: cpufreq policy. + */ +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct cpufreq_policy *policy); +#else static inline struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) +of_cpufreq_cooling_register(struct cpufreq_policy *policy) { return NULL; } - -static inline -void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) -{ - return; -} -#endif /* CONFIG_CPU_THERMAL */ +#endif /* defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) */ #endif /* __CPU_COOLING_H__ */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 492ed473ba7e..e723b78d8357 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -556,9 +556,10 @@ struct pm_subsys_data { * These flags can be set by device drivers at the probe time. They need not be * cleared by the drivers as the driver core will take care of that. * - * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. + * NEVER_SKIP: Do not skip all system suspend/resume callbacks for the device. * SMART_PREPARE: Check the return value of the driver's ->prepare callback. * SMART_SUSPEND: No need to resume the device from runtime suspend. + * LEAVE_SUSPENDED: Avoid resuming the device during system resume if possible. * * Setting SMART_PREPARE instructs bus types and PM domains which may want * system suspend/resume callbacks to be skipped for the device to return 0 from @@ -572,10 +573,14 @@ struct pm_subsys_data { * necessary from the driver's perspective. It also may cause them to skip * invocations of the ->suspend_late and ->suspend_noirq callbacks provided by * the driver if they decide to leave the device in runtime suspend. + * + * Setting LEAVE_SUSPENDED informs the PM core and middle-layer code that the + * driver prefers the device to be left in suspend after system resume. */ -#define DPM_FLAG_NEVER_SKIP BIT(0) -#define DPM_FLAG_SMART_PREPARE BIT(1) -#define DPM_FLAG_SMART_SUSPEND BIT(2) +#define DPM_FLAG_NEVER_SKIP BIT(0) +#define DPM_FLAG_SMART_PREPARE BIT(1) +#define DPM_FLAG_SMART_SUSPEND BIT(2) +#define DPM_FLAG_LEAVE_SUSPENDED BIT(3) struct dev_pm_info { pm_message_t power_state; @@ -597,6 +602,8 @@ struct dev_pm_info { bool wakeup_path:1; bool syscore:1; bool no_pm_callbacks:1; /* Owned by the PM core */ + unsigned int must_resume:1; /* Owned by the PM core */ + unsigned int may_skip_resume:1; /* Set by subsystems */ #else unsigned int should_wakeup:1; #endif @@ -766,6 +773,7 @@ extern int pm_generic_poweroff(struct device *dev); extern void pm_generic_complete(struct device *dev); extern void dev_pm_skip_next_resume_phases(struct device *dev); +extern bool dev_pm_may_skip_resume(struct device *dev); extern bool dev_pm_smart_suspend_and_suspended(struct device *dev); #else /* !CONFIG_PM_SLEEP */ diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 4c2cba7ec1d4..4238dde0aaf0 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -88,6 +88,11 @@ static inline bool device_may_wakeup(struct device *dev) return dev->power.can_wakeup && !!dev->power.wakeup; } +static inline void device_set_wakeup_path(struct device *dev) +{ + dev->power.wakeup_path = true; +} + /* drivers/base/power/wakeup.c */ extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name); extern struct wakeup_source *wakeup_source_create(const char *name); @@ -174,6 +179,8 @@ static inline bool device_may_wakeup(struct device *dev) return dev->power.can_wakeup && dev->power.should_wakeup; } +static inline void device_set_wakeup_path(struct device *dev) {} + static inline void __pm_stay_awake(struct wakeup_source *ws) {} static inline void pm_stay_awake(struct device *dev) {} diff --git a/include/linux/suspend.h b/include/linux/suspend.h index d60b0f5c38d5..cc22a24516d6 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -443,32 +443,8 @@ extern bool pm_save_wakeup_count(unsigned int count); extern void pm_wakep_autosleep_enabled(bool set); extern void pm_print_active_wakeup_sources(void); -static inline void lock_system_sleep(void) -{ - current->flags |= PF_FREEZER_SKIP; - mutex_lock(&pm_mutex); -} - -static inline void unlock_system_sleep(void) -{ - /* - * Don't use freezer_count() because we don't want the call to - * try_to_freeze() here. - * - * Reason: - * Fundamentally, we just don't need it, because freezing condition - * doesn't come into effect until we release the pm_mutex lock, - * since the freezer always works with pm_mutex held. - * - * More importantly, in the case of hibernation, - * unlock_system_sleep() gets called in snapshot_read() and - * snapshot_write() when the freezing condition is still in effect. - * Which means, if we use try_to_freeze() here, it would make them - * enter the refrigerator, thus causing hibernation to lockup. - */ - current->flags &= ~PF_FREEZER_SKIP; - mutex_unlock(&pm_mutex); -} +extern void lock_system_sleep(void); +extern void unlock_system_sleep(void); #else /* !CONFIG_PM_SLEEP */ diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h index 78946640fe03..135e5421f003 100644 --- a/include/trace/events/thermal.h +++ b/include/trace/events/thermal.h @@ -94,9 +94,9 @@ TRACE_EVENT(thermal_zone_trip, #ifdef CONFIG_CPU_THERMAL TRACE_EVENT(thermal_power_cpu_get_power, TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load, - size_t load_len, u32 dynamic_power, u32 static_power), + size_t load_len, u32 dynamic_power), - TP_ARGS(cpus, freq, load, load_len, dynamic_power, static_power), + TP_ARGS(cpus, freq, load, load_len, dynamic_power), TP_STRUCT__entry( __bitmask(cpumask, num_possible_cpus()) @@ -104,7 +104,6 @@ TRACE_EVENT(thermal_power_cpu_get_power, __dynamic_array(u32, load, load_len) __field(size_t, load_len ) __field(u32, dynamic_power ) - __field(u32, static_power ) ), TP_fast_assign( @@ -115,13 +114,12 @@ TRACE_EVENT(thermal_power_cpu_get_power, load_len * sizeof(*load)); __entry->load_len = load_len; __entry->dynamic_power = dynamic_power; - __entry->static_power = static_power; ), - TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d static_power=%d", + TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d", __get_bitmask(cpumask), __entry->freq, __print_array(__get_dynamic_array(load), __entry->load_len, 4), - __entry->dynamic_power, __entry->static_power) + __entry->dynamic_power) ); TRACE_EVENT(thermal_power_cpu_limit, diff --git a/kernel/configs/nopm.config b/kernel/configs/nopm.config new file mode 100644 index 000000000000..81ff07863576 --- /dev/null +++ b/kernel/configs/nopm.config @@ -0,0 +1,15 @@ +CONFIG_PM=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n + +# Triggers PM on OMAP +CONFIG_CPU_IDLE=n + +# Triggers enablement via hibernate callbacks +CONFIG_XEN=n + +# ARM/ARM64 architectures that select PM unconditionally +CONFIG_ARCH_OMAP2PLUS_TYPICAL=n +CONFIG_ARCH_RENESAS=n +CONFIG_ARCH_TEGRA=n +CONFIG_ARCH_VEXPRESS=n diff --git a/kernel/power/main.c b/kernel/power/main.c index 3a2ca9066583..705c2366dafe 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -22,6 +22,35 @@ DEFINE_MUTEX(pm_mutex); #ifdef CONFIG_PM_SLEEP +void lock_system_sleep(void) +{ + current->flags |= PF_FREEZER_SKIP; + mutex_lock(&pm_mutex); +} +EXPORT_SYMBOL_GPL(lock_system_sleep); + +void unlock_system_sleep(void) +{ + /* + * Don't use freezer_count() because we don't want the call to + * try_to_freeze() here. + * + * Reason: + * Fundamentally, we just don't need it, because freezing condition + * doesn't come into effect until we release the pm_mutex lock, + * since the freezer always works with pm_mutex held. + * + * More importantly, in the case of hibernation, + * unlock_system_sleep() gets called in snapshot_read() and + * snapshot_write() when the freezing condition is still in effect. + * Which means, if we use try_to_freeze() here, it would make them + * enter the refrigerator, thus causing hibernation to lockup. + */ + current->flags &= ~PF_FREEZER_SKIP; + mutex_unlock(&pm_mutex); +} +EXPORT_SYMBOL_GPL(unlock_system_sleep); + /* Routines for PM-transition notifications */ static BLOCKING_NOTIFIER_HEAD(pm_chain_head); diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index bce0464524d8..3d37c279c090 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -1645,8 +1645,7 @@ static unsigned long free_unnecessary_pages(void) * [number of saveable pages] - [number of pages that can be freed in theory] * * where the second term is the sum of (1) reclaimable slab pages, (2) active - * and (3) inactive anonymous pages, (4) active and (5) inactive file pages, - * minus mapped file pages. + * and (3) inactive anonymous pages, (4) active and (5) inactive file pages. */ static unsigned long minimum_image_size(unsigned long saveable) { @@ -1656,8 +1655,7 @@ static unsigned long minimum_image_size(unsigned long saveable) + global_node_page_state(NR_ACTIVE_ANON) + global_node_page_state(NR_INACTIVE_ANON) + global_node_page_state(NR_ACTIVE_FILE) - + global_node_page_state(NR_INACTIVE_FILE) - - global_node_page_state(NR_FILE_MAPPED); + + global_node_page_state(NR_INACTIVE_FILE); return saveable <= size ? 0 : saveable - size; } diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 293ead59eccc..a46be1261c09 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -879,7 +879,7 @@ out_clean: * space avaiable from the resume partition. */ -static int enough_swap(unsigned int nr_pages, unsigned int flags) +static int enough_swap(unsigned int nr_pages) { unsigned int free_swap = count_swap_pages(root_swap, 1); unsigned int required; @@ -915,7 +915,7 @@ int swsusp_write(unsigned int flags) return error; } if (flags & SF_NOCOMPRESS_MODE) { - if (!enough_swap(pages, flags)) { + if (!enough_swap(pages)) { pr_err("Not enough free swap\n"); error = -ENOSPC; goto out_finish; diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h index 3b005c39f068..60beaf5ed2ea 100644 --- a/tools/power/cpupower/lib/cpufreq.h +++ b/tools/power/cpupower/lib/cpufreq.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __CPUPOWER_CPUFREQ_H__ diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py index 0b24dd9d01ff..29f50d4cfea0 100755 --- a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py +++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py @@ -411,6 +411,16 @@ def set_trace_buffer_size(): print('IO error setting trace buffer size ') quit() +def free_trace_buffer(): + """ Free the trace buffer memory """ + + try: + open('/sys/kernel/debug/tracing/buffer_size_kb' + , 'w').write("1") + except: + print('IO error setting trace buffer size ') + quit() + def read_trace_data(filename): """ Read and parse trace data """ @@ -583,4 +593,9 @@ for root, dirs, files in os.walk('.'): for f in files: fix_ownership(f) +clear_trace_file() +# Free the memory +if interval: + free_trace_buffer() + os.chdir('../../') |