Merge tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth.

  Current release - regressions:

   - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
     older chips

  Current release - new code bugs:

   - ethtool: fix off-by-one error / kdoc contradicting the code for max
     RSS context IDs

   - Bluetooth: hci_qca:
      - QCA6390: fix support on non-DT platforms
      - QCA6390: don't call pwrseq_power_off() twice
      - fix a NULL-pointer derefence at shutdown

   - eth: ice: fix incorrect assigns of FEC counters

  Previous releases - regressions:

   - mptcp: fix handling endpoints with both 'signal' and 'subflow'
     flags set

   - virtio-net: fix changing ring count when vq IRQ coalescing not
     supported

   - eth: gve: fix use of netif_carrier_ok() during reconfig / reset

  Previous releases - always broken:

   - eth: idpf: fix bugs in queue re-allocation on reconfig / reset

   - ethtool: fix context creation with no parameters

  Misc:

   - linkwatch: use system_unbound_wq to ease RTNL contention"

* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
  net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
  ethtool: Fix context creation with no parameters
  net: ethtool: fix off-by-one error in max RSS context IDs
  net: pse-pd: tps23881: include missing bitfield.h header
  net: fec: Stop PPS on driver remove
  net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
  l2tp: fix lockdep splat
  net: stmmac: dwmac4: fix PCS duplex mode decode
  idpf: fix UAFs when destroying the queues
  idpf: fix memleak in vport interrupt configuration
  idpf: fix memory leaks and crashes while performing a soft reset
  bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
  net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
  net/smc: add the max value of fallback reason count
  Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
  Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
  Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
  Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
  Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
  ice: Fix incorrect assigns of FEC counts
  ...

1 files changed, 41 insertions, 14 deletions

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 4df48f1f14ab..9ea6d698e9d3 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -1415,18 +1415,28 @@ chk_add_nr()
 	local add_nr=$1
 	local echo_nr=$2
 	local port_nr=${3:-0}
-	local syn_nr=${4:-$port_nr}
-	local syn_ack_nr=${5:-$port_nr}
-	local ack_nr=${6:-$port_nr}
-	local mis_syn_nr=${7:-0}
-	local mis_ack_nr=${8:-0}
+	local ns_invert=${4:-""}
+	local syn_nr=$port_nr
+	local syn_ack_nr=$port_nr
+	local ack_nr=$port_nr
+	local mis_syn_nr=0
+	local mis_ack_nr=0
+	local ns_tx=$ns1
+	local ns_rx=$ns2
+	local extra_msg=""
 	local count
 	local timeout
 
-	timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
+	if [[ $ns_invert = "invert" ]]; then
+		ns_tx=$ns2
+		ns_rx=$ns1
+		extra_msg="invert"
+	fi
+
+	timeout=$(ip netns exec ${ns_tx} sysctl -n net.mptcp.add_addr_timeout)
 
 	print_check "add"
-	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr")
+	count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtAddAddr")
 	if [ -z "$count" ]; then
 		print_skip
 	# if the test configured a short timeout tolerate greater then expected
@@ -1438,7 +1448,7 @@ chk_add_nr()
 	fi
 
 	print_check "echo"
-	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd")
+	count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtEchoAdd")
 	if [ -z "$count" ]; then
 		print_skip
 	elif [ "$count" != "$echo_nr" ]; then
@@ -1449,7 +1459,7 @@ chk_add_nr()
 
 	if [ $port_nr -gt 0 ]; then
 		print_check "pt"
-		count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd")
+		count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtPortAdd")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$port_nr" ]; then
@@ -1459,7 +1469,7 @@ chk_add_nr()
 		fi
 
 		print_check "syn"
-		count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx")
+		count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortSynRx")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$syn_nr" ]; then
@@ -1470,7 +1480,7 @@ chk_add_nr()
 		fi
 
 		print_check "synack"
-		count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx")
+		count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPJoinPortSynAckRx")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$syn_ack_nr" ]; then
@@ -1481,7 +1491,7 @@ chk_add_nr()
 		fi
 
 		print_check "ack"
-		count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx")
+		count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortAckRx")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$ack_nr" ]; then
@@ -1492,7 +1502,7 @@ chk_add_nr()
 		fi
 
 		print_check "syn"
-		count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx")
+		count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortSynRx")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$mis_syn_nr" ]; then
@@ -1503,7 +1513,7 @@ chk_add_nr()
 		fi
 
 		print_check "ack"
-		count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx")
+		count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortAckRx")
 		if [ -z "$count" ]; then
 			print_skip
 		elif [ "$count" != "$mis_ack_nr" ]; then
@@ -1513,6 +1523,8 @@ chk_add_nr()
 			print_ok
 		fi
 	fi
+
+	print_info "$extra_msg"
 }
 
 chk_add_tx_nr()
@@ -1977,6 +1989,21 @@ signal_address_tests()
 		chk_add_nr 1 1
 	fi
 
+	# uncommon: subflow and signal flags on the same endpoint
+	# or because the user wrongly picked both, but still expects the client
+	# to create additional subflows
+	if reset "subflow and signal together"; then
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 0 2
+		pm_nl_add_endpoint $ns2 10.0.3.2 flags signal,subflow
+		run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr 1 1 1
+		chk_add_nr 1 1 0 invert  # only initiated by ns2
+		chk_add_nr 0 0 0         # none initiated by ns1
+		chk_rst_nr 0 0 invert    # no RST sent by the client
+		chk_rst_nr 0 0           # no RST sent by the server
+	fi
+
 	# accept and use add_addr with additional subflows
 	if reset "multiple subflows and signal"; then
 		pm_nl_set_limits $ns1 0 3