Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...

2 files changed, 65 insertions, 1 deletions

diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 9074b477bff0..af146bb03b4d 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -31,12 +31,17 @@
 #define BILLION 1E9
 
 static char *result[] = { "NOT OKAY", "OKAY" };
+static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
 
 struct pci_test {
 	char		*device;
 	char		barnum;
 	bool		legacyirq;
 	unsigned int	msinum;
+	unsigned int	msixnum;
+	int		irqtype;
+	bool		set_irqtype;
+	bool		get_irqtype;
 	bool		read;
 	bool		write;
 	bool		copy;
@@ -65,6 +70,24 @@ static int run_test(struct pci_test *test)
 			fprintf(stdout, "%s\n", result[ret]);
 	}
 
+	if (test->set_irqtype) {
+		ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
+		fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
+		if (ret < 0)
+			fprintf(stdout, "FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->get_irqtype) {
+		ret = ioctl(fd, PCITEST_GET_IRQTYPE);
+		fprintf(stdout, "GET IRQ TYPE:\t\t");
+		if (ret < 0)
+			fprintf(stdout, "FAILED\n");
+		else
+			fprintf(stdout, "%s\n", irq[ret]);
+	}
+
 	if (test->legacyirq) {
 		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
 		fprintf(stdout, "LEGACY IRQ:\t");
@@ -83,6 +106,15 @@ static int run_test(struct pci_test *test)
 			fprintf(stdout, "%s\n", result[ret]);
 	}
 
+	if (test->msixnum > 0 && test->msixnum <= 2048) {
+		ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
+		fprintf(stdout, "MSI-X%d:\t\t", test->msixnum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
 	if (test->write) {
 		ret = ioctl(fd, PCITEST_WRITE, test->size);
 		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
@@ -133,7 +165,7 @@ int main(int argc, char **argv)
 	/* set default endpoint device */
 	test->device = "/dev/pci-endpoint-test.0";
 
-	while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+	while ((c = getopt(argc, argv, "D:b:m:x:i:Ilrwcs:")) != EOF)
 	switch (c) {
 	case 'D':
 		test->device = optarg;
@@ -151,6 +183,20 @@ int main(int argc, char **argv)
 		if (test->msinum < 1 || test->msinum > 32)
 			goto usage;
 		continue;
+	case 'x':
+		test->msixnum = atoi(optarg);
+		if (test->msixnum < 1 || test->msixnum > 2048)
+			goto usage;
+		continue;
+	case 'i':
+		test->irqtype = atoi(optarg);
+		if (test->irqtype < 0 || test->irqtype > 2)
+			goto usage;
+		test->set_irqtype = true;
+		continue;
+	case 'I':
+		test->get_irqtype = true;
+		continue;
 	case 'r':
 		test->read = true;
 		continue;
@@ -173,6 +219,9 @@ usage:
 			"\t-D <dev>		PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
 			"\t-b <bar num>		BAR test (bar number between 0..5)\n"
 			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
+			"\t-x <msix num>	\tMSI-X test (msix number between 1..2048)\n"
+			"\t-i <irq type>	\tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
+			"\t-I			Get current IRQ type configured\n"
 			"\t-l			Legacy IRQ test\n"
 			"\t-r			Read buffer test\n"
 			"\t-w			Write buffer test\n"
diff --git a/tools/pci/pcitest.sh b/tools/pci/pcitest.sh
index 77e8c85ef744..75ed48ff2990 100644
--- a/tools/pci/pcitest.sh
+++ b/tools/pci/pcitest.sh
@@ -16,7 +16,10 @@ echo
 echo "Interrupt tests"
 echo
 
+pcitest -i 0
 pcitest -l
+
+pcitest -i 1
 msi=1
 
 while [ $msi -lt 33 ]
@@ -26,9 +29,21 @@ do
 done
 echo
 
+pcitest -i 2
+msix=1
+
+while [ $msix -lt 2049 ]
+do
+        pcitest -x $msix
+        msix=`expr $msix + 1`
+done
+echo
+
 echo "Read Tests"
 echo
 
+pcitest -i 1
+
 pcitest -r -s 1
 pcitest -r -s 1024
 pcitest -r -s 1025