Merge branch 'for-next' into for-linus

Pull 4.15 updates to take over the previous urgent fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

140 files changed, 418 insertions, 36486 deletions

diff --git a/sound/Kconfig b/sound/Kconfig
index d7d2aac9542e..b6d047985905 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -3,25 +3,7 @@ menuconfig SOUND
 	depends on HAS_IOMEM
 	help
 	  If you have a sound card in your computer, i.e. if it can say more
-	  than an occasional beep, say Y.  Be sure to have all the information
-	  about your sound card and its configuration down (I/O port,
-	  interrupt and DMA channel), because you will be asked for it.
-
-	  You want to read the Sound-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. General information about
-	  the modular sound system is contained in the files
-	  <file:Documentation/sound/oss/Introduction>.  The file
-	  <file:Documentation/sound/oss/README.OSS> contains some slightly
-	  outdated but still useful information as well.  Newer sound
-	  driver documentation is found in <file:Documentation/sound/alsa/*>.
-
-	  If you have a PnP sound card and you want to configure it at boot
-	  time using the ISA PnP tools (read
-	  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-	  compile the sound card support as a module and load that module
-	  after the PnP configuration is finished.  To do this, choose M here
-	  and read <file:Documentation/sound/oss/README.modules>; the module
-	  will be called soundcore.
+	  than an occasional beep, say Y.
 
 if SOUND
 
@@ -114,19 +96,6 @@ source "sound/synth/Kconfig"
 
 endif # SND
 
-menuconfig SOUND_PRIME
-	tristate "Open Sound System (DEPRECATED)"
-	select SOUND_OSS_CORE
-	depends on BROKEN
-	help
-	  Say 'Y' or 'M' to enable Open Sound System drivers.
-
-if SOUND_PRIME
-
-source "sound/oss/Kconfig"
-
-endif # SOUND_PRIME
-
 endif # !UML
 
 endif # SOUND
diff --git a/sound/Makefile b/sound/Makefile
index 6de45d2c32f7..e5794fdd3d79 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -2,8 +2,7 @@
 #
 
 obj-$(CONFIG_SOUND) += soundcore.o
-obj-$(CONFIG_SOUND_PRIME) += oss/
-obj-$(CONFIG_DMASOUND) += oss/
+obj-$(CONFIG_DMASOUND) += oss/dmasound/
 obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
 	firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/
 obj-$(CONFIG_SND_AOA) += aoa/
diff --git a/sound/core/hrtimer.c b/sound/core/hrtimer.c
index 6e47b823bcaa..18cb6f476bf4 100644
--- a/sound/core/hrtimer.c
+++ b/sound/core/hrtimer.c
@@ -127,7 +127,7 @@ static int snd_hrtimer_stop(struct snd_timer *t)
 	return 0;
 }
 
-static struct snd_timer_hardware hrtimer_hw = {
+static const struct snd_timer_hardware hrtimer_hw __initconst = {
 	.flags =	SNDRV_TIMER_HW_AUTO | SNDRV_TIMER_HW_TASKLET,
 	.open =		snd_hrtimer_open,
 	.close =	snd_hrtimer_close,
diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index a73baa1242be..8faae3d1455d 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -228,6 +228,8 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw,
 	memset(&info, 0, sizeof(info));
 	if (copy_from_user(&info, _info, sizeof(info)))
 		return -EFAULT;
+	if (info.index >= 32)
+		return -EINVAL;
 	/* check whether the dsp was already loaded */
 	if (hw->dsp_loaded & (1 << info.index))
 		return -EBUSY;
diff --git a/sound/core/init.c b/sound/core/init.c
index 32ebe2f6bc59..168ae03d3a1c 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -255,6 +255,7 @@ int snd_card_new(struct device *parent, int idx, const char *xid,
 #ifdef CONFIG_PM
 	init_waitqueue_head(&card->power_sleep);
 #endif
+	init_waitqueue_head(&card->remove_sleep);
 
 	device_initialize(&card->card_dev);
 	card->card_dev.parent = parent;
@@ -452,6 +453,35 @@ int snd_card_disconnect(struct snd_card *card)
 }
 EXPORT_SYMBOL(snd_card_disconnect);
 
+/**
+ * snd_card_disconnect_sync - disconnect card and wait until files get closed
+ * @card: card object to disconnect
+ *
+ * This calls snd_card_disconnect() for disconnecting all belonging components
+ * and waits until all pending files get closed.
+ * It assures that all accesses from user-space finished so that the driver
+ * can release its resources gracefully.
+ */
+void snd_card_disconnect_sync(struct snd_card *card)
+{
+	int err;
+
+	err = snd_card_disconnect(card);
+	if (err < 0) {
+		dev_err(card->dev,
+			"snd_card_disconnect error (%d), skipping sync\n",
+			err);
+		return;
+	}
+
+	spin_lock_irq(&card->files_lock);
+	wait_event_lock_irq(card->remove_sleep,
+			    list_empty(&card->files_list),
+			    card->files_lock);
+	spin_unlock_irq(&card->files_lock);
+}
+EXPORT_SYMBOL_GPL(snd_card_disconnect_sync);
+
 static int snd_card_do_free(struct snd_card *card)
 {
 #if IS_ENABLED(CONFIG_SND_MIXER_OSS)
@@ -957,6 +987,8 @@ int snd_card_file_remove(struct snd_card *card, struct file *file)
 			break;
 		}
 	}
+	if (list_empty(&card->files_list))
+		wake_up_all(&card->remove_sleep);
 	spin_unlock(&card->files_lock);
 	if (!found) {
 		dev_err(card->dev, "card file remove problem (%p)\n", file);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index f652e90efd7e..84c2a17c56ee 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -310,7 +310,7 @@ EXPORT_SYMBOL(snd_jack_set_parent);
  * @type:    Jack report type for this key
  * @keytype: Input layer key type to be reported
  *
- * Map a SND_JACK_BTN_ button type to an input layer key, allowing
+ * Map a SND_JACK_BTN_* button type to an input layer key, allowing
  * reporting of keys on accessories via the jack abstraction.  If no
  * mapping is provided but keys are enabled in the jack type then
  * BTN_n numeric buttons will be reported.
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 7eadb7fd8074..9070f277f8db 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -775,6 +775,9 @@ static int _snd_pcm_new(struct snd_card *card, const char *id, int device,
 		.dev_register =	snd_pcm_dev_register,
 		.dev_disconnect = snd_pcm_dev_disconnect,
 	};
+	static struct snd_device_ops internal_ops = {
+		.dev_free = snd_pcm_dev_free,
+	};
 
 	if (snd_BUG_ON(!card))
 		return -ENXIO;
@@ -801,7 +804,8 @@ static int _snd_pcm_new(struct snd_card *card, const char *id, int device,
 	if (err < 0)
 		goto free_pcm;
 
-	err = snd_device_new(card, SNDRV_DEV_PCM, pcm, &ops);
+	err = snd_device_new(card, SNDRV_DEV_PCM, pcm,
+			     internal ? &internal_ops : &ops);
 	if (err < 0)
 		goto free_pcm;
 
@@ -1099,8 +1103,6 @@ static int snd_pcm_dev_register(struct snd_device *device)
 	if (snd_BUG_ON(!device || !device->device_data))
 		return -ENXIO;
 	pcm = device->device_data;
-	if (pcm->internal)
-		return 0;
 
 	mutex_lock(&register_mutex);
 	err = snd_pcm_add(pcm);
@@ -1152,6 +1154,10 @@ static int snd_pcm_dev_disconnect(struct snd_device *device)
 		for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) {
 			snd_pcm_stream_lock_irq(substream);
 			if (substream->runtime) {
+				if (snd_pcm_running(substream))
+					snd_pcm_stop(substream,
+						     SNDRV_PCM_STATE_DISCONNECTED);
+				/* to be sure, set the state unconditionally */
 				substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED;
 				wake_up(&substream->runtime->sleep);
 				wake_up(&substream->runtime->tsleep);
@@ -1159,12 +1165,10 @@ static int snd_pcm_dev_disconnect(struct snd_device *device)
 			snd_pcm_stream_unlock_irq(substream);
 		}
 	}
-	if (!pcm->internal) {
-		pcm_call_notify(pcm, n_disconnect);
-	}
+
+	pcm_call_notify(pcm, n_disconnect);
 	for (cidx = 0; cidx < 2; cidx++) {
-		if (!pcm->internal)
-			snd_unregister_device(&pcm->streams[cidx].dev);
+		snd_unregister_device(&pcm->streams[cidx].dev);
 		free_chmap(&pcm->streams[cidx]);
 	}
 	mutex_unlock(&pcm->open_mutex);
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 2fec2feac387..a4d92e46c459 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -195,7 +195,6 @@ EXPORT_SYMBOL_GPL(snd_pcm_stream_unlock_irqrestore);
 
 int snd_pcm_info(struct snd_pcm_substream *substream, struct snd_pcm_info *info)
 {
-	struct snd_pcm_runtime *runtime;
 	struct snd_pcm *pcm = substream->pcm;
 	struct snd_pcm_str *pstr = substream->pstr;
 
@@ -211,7 +210,6 @@ int snd_pcm_info(struct snd_pcm_substream *substream, struct snd_pcm_info *info)
 	info->subdevices_count = pstr->substream_count;
 	info->subdevices_avail = pstr->substream_count - pstr->substream_opened;
 	strlcpy(info->subname, substream->name, sizeof(info->subname));
-	runtime = substream->runtime;
 
 	return 0;
 }
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index d10c780dfd54..6e22eea72654 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -802,6 +802,10 @@ static int snd_seq_deliver_event(struct snd_seq_client *client, struct snd_seq_e
 		return -EMLINK;
 	}
 
+	if (snd_seq_ev_is_variable(event) &&
+	    snd_BUG_ON(atomic && (event->data.ext.len & SNDRV_SEQ_EXT_USRPTR)))
+		return -EINVAL;
+
 	if (event->queue == SNDRV_SEQ_ADDRESS_SUBSCRIBERS ||
 	    event->dest.client == SNDRV_SEQ_ADDRESS_SUBSCRIBERS)
 		result = deliver_to_subscribers(client, event, atomic, hop);
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 15e82a656d96..ee09dace8bb1 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -1069,15 +1069,17 @@ EXPORT_SYMBOL(snd_timer_global_register);
 
 struct snd_timer_system_private {
 	struct timer_list tlist;
+	struct snd_timer *snd_timer;
 	unsigned long last_expires;
 	unsigned long last_jiffies;
 	unsigned long correction;
 };
 
-static void snd_timer_s_function(unsigned long data)
+static void snd_timer_s_function(struct timer_list *t)
 {
-	struct snd_timer *timer = (struct snd_timer *)data;
-	struct snd_timer_system_private *priv = timer->private_data;
+	struct snd_timer_system_private *priv = from_timer(priv, t,
+								tlist);
+	struct snd_timer *timer = priv->snd_timer;
 	unsigned long jiff = jiffies;
 	if (time_after(jiff, priv->last_expires))
 		priv->correction += (long)jiff - (long)priv->last_expires;
@@ -1159,7 +1161,8 @@ static int snd_timer_register_system(void)
 		snd_timer_free(timer);
 		return -ENOMEM;
 	}
-	setup_timer(&priv->tlist, snd_timer_s_function, (unsigned long) timer);
+	priv->snd_timer = timer;
+	timer_setup(&priv->tlist, snd_timer_s_function, 0);
 	timer->private_data = priv;
 	timer->private_free = snd_timer_free_system;
 	return snd_timer_global_register(timer);
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
index 135adb17703c..afac886ffa28 100644
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -529,9 +529,9 @@ static unsigned int loopback_pos_update(struct loopback_cable *cable)
 	return running;
 }
 
-static void loopback_timer_function(unsigned long data)
+static void loopback_timer_function(struct timer_list *t)
 {
-	struct loopback_pcm *dpcm = (struct loopback_pcm *)data;
+	struct loopback_pcm *dpcm = from_timer(dpcm, t, timer);
 	unsigned long flags;
 
 	spin_lock_irqsave(&dpcm->cable->lock, flags);
@@ -675,8 +675,7 @@ static int loopback_open(struct snd_pcm_substream *substream)
 	}
 	dpcm->loopback = loopback;
 	dpcm->substream = substream;
-	setup_timer(&dpcm->timer, loopback_timer_function,
-		    (unsigned long)dpcm);
+	timer_setup(&dpcm->timer, loopback_timer_function, 0);
 
 	cable = loopback->cables[substream->number][dev];
 	if (!cable) {
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index c0939a0164a6..7b2b1f766b00 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -306,9 +306,9 @@ static int dummy_systimer_prepare(struct snd_pcm_substream *substream)
 	return 0;
 }
 
-static void dummy_systimer_callback(unsigned long data)
+static void dummy_systimer_callback(struct timer_list *t)
 {
-	struct dummy_systimer_pcm *dpcm = (struct dummy_systimer_pcm *)data;
+	struct dummy_systimer_pcm *dpcm = from_timer(dpcm, t, timer);
 	unsigned long flags;
 	int elapsed = 0;
 	
@@ -343,8 +343,7 @@ static int dummy_systimer_create(struct snd_pcm_substream *substream)
 	if (!dpcm)
 		return -ENOMEM;
 	substream->runtime->private_data = dpcm;
-	setup_timer(&dpcm->timer, dummy_systimer_callback,
-			(unsigned long) dpcm);
+	timer_setup(&dpcm->timer, dummy_systimer_callback, 0);
 	spin_lock_init(&dpcm->lock);
 	dpcm->substream = substream;
 	return 0;
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index b997222274bd..3e745f47dd2f 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -169,9 +169,9 @@ EXPORT_SYMBOL(snd_mpu401_uart_interrupt_tx);
  * timer callback
  * reprogram the timer and call the interrupt job
  */
-static void snd_mpu401_uart_timer(unsigned long data)
+static void snd_mpu401_uart_timer(struct timer_list *t)
 {
-	struct snd_mpu401 *mpu = (struct snd_mpu401 *)data;
+	struct snd_mpu401 *mpu = from_timer(mpu, t, timer);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mpu->timer_lock, flags);
@@ -191,8 +191,7 @@ static void snd_mpu401_uart_add_timer (struct snd_mpu401 *mpu, int input)
 
 	spin_lock_irqsave (&mpu->timer_lock, flags);
 	if (mpu->timer_invoked == 0) {
-		setup_timer(&mpu->timer, snd_mpu401_uart_timer,
-			    (unsigned long)mpu);
+		timer_setup(&mpu->timer, snd_mpu401_uart_timer, 0);
 		mod_timer(&mpu->timer, 1 + jiffies);
 	} 
 	mpu->timer_invoked |= input ? MPU401_MODE_INPUT_TIMER :
diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c
index 0f6392001e30..547662e02fcc 100644
--- a/sound/drivers/mtpav.c
+++ b/sound/drivers/mtpav.c
@@ -406,10 +406,10 @@ static void snd_mtpav_input_trigger(struct snd_rawmidi_substream *substream, int
  * timer interrupt for outputs
  */
 
-static void snd_mtpav_output_timer(unsigned long data)
+static void snd_mtpav_output_timer(struct timer_list *t)
 {
 	unsigned long flags;
-	struct mtpav *chip = (struct mtpav *)data;
+	struct mtpav *chip = from_timer(chip, t, timer);
 	int p;
 
 	spin_lock_irqsave(&chip->spinlock, flags);
@@ -707,8 +707,7 @@ static int snd_mtpav_probe(struct platform_device *dev)
 	mtp_card->share_irq = 0;
 	mtp_card->inmidistate = 0;
 	mtp_card->outmidihwport = 0xffffffff;
-	setup_timer(&mtp_card->timer, snd_mtpav_output_timer,
-		    (unsigned long) mtp_card);
+	timer_setup(&mtp_card->timer, snd_mtpav_output_timer, 0);
 
 	card->private_free = snd_mtpav_free;
 
diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c
index 13c0a7e1bc2b..bb3f3a5a6951 100644
--- a/sound/drivers/opl3/opl3_midi.c
+++ b/sound/drivers/opl3/opl3_midi.c
@@ -238,10 +238,10 @@ static int opl3_get_voice(struct snd_opl3 *opl3, int instr_4op,
 /*
  * System timer interrupt function
  */
-void snd_opl3_timer_func(unsigned long data)
+void snd_opl3_timer_func(struct timer_list *t)
 {
 
-	struct snd_opl3 *opl3 = (struct snd_opl3 *)data;
+	struct snd_opl3 *opl3 = from_timer(opl3, t, tlist);
 	unsigned long flags;
 	int again = 0;
 	int i;
diff --git a/sound/drivers/opl3/opl3_seq.c b/sound/drivers/opl3/opl3_seq.c
index d3e91be8b23a..5f881c4cdf1f 100644
--- a/sound/drivers/opl3/opl3_seq.c
+++ b/sound/drivers/opl3/opl3_seq.c
@@ -248,7 +248,7 @@ static int snd_opl3_seq_probe(struct device *_dev)
 	}
 
 	/* setup system timer */
-	setup_timer(&opl3->tlist, snd_opl3_timer_func, (unsigned long) opl3);
+	timer_setup(&opl3->tlist, snd_opl3_timer_func, 0);
 	spin_lock_init(&opl3->sys_timer_lock);
 	opl3->sys_timer_status = 0;
 
diff --git a/sound/drivers/opl3/opl3_voice.h b/sound/drivers/opl3/opl3_voice.h
index eaef435e0528..a2445163008e 100644
--- a/sound/drivers/opl3/opl3_voice.h
+++ b/sound/drivers/opl3/opl3_voice.h
@@ -37,7 +37,7 @@ void snd_opl3_nrpn(void *p, struct snd_midi_channel *chan, struct snd_midi_chann
 void snd_opl3_sysex(void *p, unsigned char *buf, int len, int parsed, struct snd_midi_channel_set *chset);
 
 void snd_opl3_calc_volume(unsigned char *reg, int vel, struct snd_midi_channel *chan);
-void snd_opl3_timer_func(unsigned long data);
+void snd_opl3_timer_func(struct timer_list *t);
 
 /* Prototypes for opl3_drums.c */
 void snd_opl3_load_drums(struct snd_opl3 *opl3);
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index 88e66ea0306d..0a67b8b9f176 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -309,12 +309,12 @@ static irqreturn_t snd_uart16550_interrupt(int irq, void *dev_id)
 }
 
 /* When the polling mode, this function calls snd_uart16550_io_loop. */
-static void snd_uart16550_buffer_timer(unsigned long data)
+static void snd_uart16550_buffer_timer(struct timer_list *t)
 {
 	unsigned long flags;
 	struct snd_uart16550 *uart;
 
-	uart = (struct snd_uart16550 *)data;
+	uart = from_timer(uart, t, buffer_timer);
 	spin_lock_irqsave(&uart->open_lock, flags);
 	snd_uart16550_del_timer(uart);
 	snd_uart16550_io_loop(uart);
@@ -828,8 +828,7 @@ static int snd_uart16550_create(struct snd_card *card,
 	uart->prev_in = 0;
 	uart->rstatus = 0;
 	memset(uart->prev_status, 0x80, sizeof(unsigned char) * SNDRV_SERIAL_MAX_OUTS);
-	setup_timer(&uart->buffer_timer, snd_uart16550_buffer_timer,
-		    (unsigned long)uart);
+	timer_setup(&uart->buffer_timer, snd_uart16550_buffer_timer, 0);
 	uart->timer_running = 0;
 
 	/* Register device */
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index f6d2985b2520..560ec0986e1a 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -319,7 +319,8 @@ int snd_hdac_bus_parse_capabilities(struct hdac_bus *bus)
 			break;
 
 		default:
-			dev_dbg(bus->dev, "Unknown capability %d\n", cur_cap);
+			dev_err(bus->dev, "Unknown capability %d\n", cur_cap);
+			cur_cap = 0;
 			break;
 		}
 
diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 19deb306facb..06f845e293cb 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -87,7 +87,7 @@ int snd_hdac_device_init(struct hdac_device *codec, struct hdac_bus *bus,
 
 	fg = codec->afg ? codec->afg : codec->mfg;
 
-	err = snd_hdac_refresh_widgets(codec);
+	err = snd_hdac_refresh_widgets(codec, false);
 	if (err < 0)
 		goto error;
 
@@ -388,11 +388,12 @@ static void setup_fg_nodes(struct hdac_device *codec)
 /**
  * snd_hdac_refresh_widgets - Reset the widget start/end nodes
  * @codec: the codec object
+ * @sysfs: re-initialize sysfs tree, too
  */
-int snd_hdac_refresh_widgets(struct hdac_device *codec)
+int snd_hdac_refresh_widgets(struct hdac_device *codec, bool sysfs)
 {
 	hda_nid_t start_nid;
-	int nums;
+	int nums, err;
 
 	nums = snd_hdac_get_sub_nodes(codec, codec->afg, &start_nid);
 	if (!start_nid || nums <= 0 || nums >= 0xff) {
@@ -401,6 +402,12 @@ int snd_hdac_refresh_widgets(struct hdac_device *codec)
 		return -EINVAL;
 	}
 
+	if (sysfs) {
+		err = hda_widget_sysfs_reinit(codec, start_nid, nums);
+		if (err < 0)
+			return err;
+	}
+
 	codec->num_nodes = nums;
 	codec->start_nid = start_nid;
 	codec->end_nid = start_nid + nums;
@@ -408,36 +415,6 @@ int snd_hdac_refresh_widgets(struct hdac_device *codec)
 }
 EXPORT_SYMBOL_GPL(snd_hdac_refresh_widgets);
 
-/**
- * snd_hdac_refresh_widget_sysfs - Reset the codec widgets and reinit the
- * codec sysfs
- * @codec: the codec object
- *
- * first we need to remove sysfs, then refresh widgets and lastly
- * recreate it
- */
-int snd_hdac_refresh_widget_sysfs(struct hdac_device *codec)
-{
-	int ret;
-
-	if (device_is_registered(&codec->dev))
-		hda_widget_sysfs_exit(codec);
-	ret = snd_hdac_refresh_widgets(codec);
-	if (ret) {
-		dev_err(&codec->dev, "failed to refresh widget: %d\n", ret);
-		return ret;
-	}
-	if (device_is_registered(&codec->dev)) {
-		ret = hda_widget_sysfs_init(codec);
-		if (ret) {
-			dev_err(&codec->dev, "failed to init sysfs: %d\n", ret);
-			return ret;
-		}
-	}
-	return ret;
-}
-EXPORT_SYMBOL_GPL(snd_hdac_refresh_widget_sysfs);
-
 /* return CONNLIST_LEN parameter of the given widget */
 static unsigned int get_num_conns(struct hdac_device *codec, hda_nid_t nid)
 {
diff --git a/sound/hda/hdac_sysfs.c b/sound/hda/hdac_sysfs.c
index 42d61bf41969..e123ba6b2e81 100644
--- a/sound/hda/hdac_sysfs.c
+++ b/sound/hda/hdac_sysfs.c
@@ -414,3 +414,50 @@ void hda_widget_sysfs_exit(struct hdac_device *codec)
 {
 	widget_tree_free(codec);
 }
+
+int hda_widget_sysfs_reinit(struct hdac_device *codec,
+			    hda_nid_t start_nid, int num_nodes)
+{
+	struct hdac_widget_tree *tree;
+	hda_nid_t end_nid = start_nid + num_nodes;
+	hda_nid_t nid;
+	int i;
+
+	if (!codec->widgets)
+		return hda_widget_sysfs_init(codec);
+
+	tree = kmemdup(codec->widgets, sizeof(*tree), GFP_KERNEL);
+	if (!tree)
+		return -ENOMEM;
+
+	tree->nodes = kcalloc(num_nodes + 1, sizeof(*tree->nodes), GFP_KERNEL);
+	if (!tree->nodes) {
+		kfree(tree);
+		return -ENOMEM;
+	}
+
+	/* prune non-existing nodes */
+	for (i = 0, nid = codec->start_nid; i < codec->num_nodes; i++, nid++) {
+		if (nid < start_nid || nid >= end_nid)
+			free_widget_node(codec->widgets->nodes[i],
+					 &widget_node_group);
+	}
+
+	/* add new nodes */
+	for (i = 0, nid = start_nid; i < num_nodes; i++, nid++) {
+		if (nid < codec->start_nid || nid >= codec->end_nid)
+			add_widget_node(tree->root, nid, &widget_node_group,
+					&tree->nodes[i]);
+		else
+			tree->nodes[i] =
+				codec->widgets->nodes[nid - codec->start_nid];
+	}
+
+	/* replace with the new tree */
+	kfree(codec->widgets->nodes);
+	kfree(codec->widgets);
+	codec->widgets = tree;
+
+	kobject_uevent(tree->root, KOBJ_CHANGE);
+	return 0;
+}
diff --git a/sound/hda/local.h b/sound/hda/local.h
index 0d5bb159d538..c586ea62d49e 100644
--- a/sound/hda/local.h
+++ b/sound/hda/local.h
@@ -28,6 +28,8 @@ static inline unsigned int get_wcaps_channels(u32 wcaps)
 
 extern const struct attribute_group *hdac_dev_attr_groups[];
 int hda_widget_sysfs_init(struct hdac_device *codec);
+int hda_widget_sysfs_reinit(struct hdac_device *codec, hda_nid_t start_nid,
+			    int num_nodes);
 void hda_widget_sysfs_exit(struct hdac_device *codec);
 
 #endif /* __HDAC_LOCAL_H */
diff --git a/sound/i2c/other/ak4117.c b/sound/i2c/other/ak4117.c
index 3ab099fb8c15..b923342cadf4 100644
--- a/sound/i2c/other/ak4117.c
+++ b/sound/i2c/other/ak4117.c
@@ -35,7 +35,7 @@ MODULE_LICENSE("GPL");
 
 #define AK4117_ADDR			0x00 /* fixed address */
 
-static void snd_ak4117_timer(unsigned long data);
+static void snd_ak4117_timer(struct timer_list *t);
 
 static void reg_write(struct ak4117 *ak4117, unsigned char reg, unsigned char val)
 {
@@ -91,7 +91,7 @@ int snd_ak4117_create(struct snd_card *card, ak4117_read_t *read, ak4117_write_t
 	chip->read = read;
 	chip->write = write;
 	chip->private_data = private_data;
-	setup_timer(&chip->timer, snd_ak4117_timer, (unsigned long)chip);
+	timer_setup(&chip->timer, snd_ak4117_timer, 0);
 
 	for (reg = 0; reg < 5; reg++)
 		chip->regmap[reg] = pgm[reg];
@@ -529,9 +529,9 @@ int snd_ak4117_check_rate_and_errors(struct ak4117 *ak4117, unsigned int flags)
 	return res;
 }
 
-static void snd_ak4117_timer(unsigned long data)
+static void snd_ak4117_timer(struct timer_list *t)
 {
-	struct ak4117 *chip = (struct ak4117 *)data;
+	struct ak4117 *chip = from_timer(chip, t, timer);
 
 	if (chip->init)
 		return;
diff --git a/sound/isa/sb/emu8000_pcm.c b/sound/isa/sb/emu8000_pcm.c
index 8f34551abd8d..bc5af71d3bdb 100644
--- a/sound/isa/sb/emu8000_pcm.c
+++ b/sound/isa/sb/emu8000_pcm.c
@@ -193,9 +193,9 @@ static inline int emu8k_get_curpos(struct snd_emu8k_pcm *rec, int ch)
  * timer interrupt handler
  * check the current position and update the period if necessary.
  */
-static void emu8k_pcm_timer_func(unsigned long data)
+static void emu8k_pcm_timer_func(struct timer_list *t)
 {
-	struct snd_emu8k_pcm *rec = (struct snd_emu8k_pcm *)data;
+	struct snd_emu8k_pcm *rec = from_timer(rec, t, timer);
 	int ptr, delta;
 
 	spin_lock(&rec->timer_lock);
@@ -241,7 +241,7 @@ static int emu8k_pcm_open(struct snd_pcm_substream *subs)
 	runtime->private_data = rec;
 
 	spin_lock_init(&rec->timer_lock);
-	setup_timer(&rec->timer, emu8k_pcm_timer_func, (unsigned long)rec);
+	timer_setup(&rec->timer, emu8k_pcm_timer_func, 0);
 
 	runtime->hw = emu8k_pcm_hw;
 	runtime->hw.buffer_bytes_max = emu->mem_size - LOOP_BLANK_SIZE * 3;
diff --git a/sound/isa/sb/sb8_midi.c b/sound/isa/sb/sb8_midi.c
index bd672abb4854..4affdcb78f72 100644
--- a/sound/isa/sb/sb8_midi.c
+++ b/sound/isa/sb/sb8_midi.c
@@ -138,6 +138,7 @@ static int snd_sb8dsp_midi_output_close(struct snd_rawmidi_substream *substream)
 	struct snd_sb *chip;
 
 	chip = substream->rmidi->private_data;
+	del_timer_sync(&chip->midi_timer);
 	spin_lock_irqsave(&chip->open_lock, flags);
 	chip->open &= ~(SB_OPEN_MIDI_OUTPUT | SB_OPEN_MIDI_OUTPUT_TRIGGER);
 	chip->midi_substream_output = NULL;
@@ -209,10 +210,10 @@ static void snd_sb8dsp_midi_output_write(struct snd_rawmidi_substream *substream
 	}
 }
 
-static void snd_sb8dsp_midi_output_timer(unsigned long data)
+static void snd_sb8dsp_midi_output_timer(struct timer_list *t)
 {
-	struct snd_rawmidi_substream *substream = (struct snd_rawmidi_substream *) data;
-	struct snd_sb * chip = substream->rmidi->private_data;
+	struct snd_sb *chip = from_timer(chip, t, midi_timer);
+	struct snd_rawmidi_substream *substream = chip->midi_substream_output;
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->open_lock, flags);
@@ -230,9 +231,6 @@ static void snd_sb8dsp_midi_output_trigger(struct snd_rawmidi_substream *substre
 	spin_lock_irqsave(&chip->open_lock, flags);
 	if (up) {
 		if (!(chip->open & SB_OPEN_MIDI_OUTPUT_TRIGGER)) {
-			setup_timer(&chip->midi_timer,
-				    snd_sb8dsp_midi_output_timer,
-				    (unsigned long) substream);
 			mod_timer(&chip->midi_timer, 1 + jiffies);
 			chip->open |= SB_OPEN_MIDI_OUTPUT_TRIGGER;
 		}
@@ -275,6 +273,7 @@ int snd_sb8dsp_midi(struct snd_sb *chip, int device)
 	if (chip->hardware >= SB_HW_20)
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_DUPLEX;
 	rmidi->private_data = chip;
+	timer_setup(&chip->midi_timer, snd_sb8dsp_midi_output_timer, 0);
 	chip->rmidi = rmidi;
 	return 0;
 }
diff --git a/sound/isa/wavefront/wavefront_midi.c b/sound/isa/wavefront/wavefront_midi.c
index 2aa05f3aaa38..556b14738970 100644
--- a/sound/isa/wavefront/wavefront_midi.c
+++ b/sound/isa/wavefront/wavefront_midi.c
@@ -349,10 +349,10 @@ static void snd_wavefront_midi_input_trigger(struct snd_rawmidi_substream *subst
 	spin_unlock_irqrestore (&midi->virtual, flags);
 }
 
-static void snd_wavefront_midi_output_timer(unsigned long data)
+static void snd_wavefront_midi_output_timer(struct timer_list *t)
 {
-	snd_wavefront_card_t *card = (snd_wavefront_card_t *)data;
-	snd_wavefront_midi_t *midi = &card->wavefront.midi;
+	snd_wavefront_midi_t *midi = from_timer(midi, t, timer);
+	snd_wavefront_card_t *card = midi->timer_card;
 	unsigned long flags;
 	
 	spin_lock_irqsave (&midi->virtual, flags);
@@ -383,9 +383,9 @@ static void snd_wavefront_midi_output_trigger(struct snd_rawmidi_substream *subs
 	if (up) {
 		if ((midi->mode[mpu] & MPU401_MODE_OUTPUT_TRIGGER) == 0) {
 			if (!midi->istimer) {
-				setup_timer(&midi->timer,
+				timer_setup(&midi->timer,
 					    snd_wavefront_midi_output_timer,
-					    (unsigned long) substream->rmidi->card->private_data);
+					    0);
 				mod_timer(&midi->timer, 1 + jiffies);
 			}
 			midi->istimer++;
diff --git a/sound/oss/CHANGELOG b/sound/oss/CHANGELOG
deleted file mode 100644
index 8706cd66ca1f..000000000000
--- a/sound/oss/CHANGELOG
+++ /dev/null
@@ -1,369 +0,0 @@
-Note these changes relate to Hannu's code and don't include the changes
-made outside of this for modularising the sound
-
-Changelog for version 3.8o
---------------------------
-
-Since 3.8h
-- Included support for OPL3-SA1 and SoftOSS
-
-Since 3.8
-- Fixed SNDCTL_DSP_GETOSPACE
-- Compatibility fixes for Linux 2.1.47
-
-Since 3.8-beta21
-- Fixed all known bugs (I think).
-
-Since 3.8-beta8
-- Lot of fixes to audio playback code in dmabuf.c
-
-Since 3.8-beta6
-- Fixed the famous Quake delay bug.
-
-Since 3.8-beta5
-- Fixed many bugs in audio playback.
-
-Since 3.8-beta4
-- Just minor changes.
-
-Since 3.8-beta1
-- Major rewrite of audio playback handling.
-- Added AWE32 support by Takashi Iwai (in ./lowlevel/).
-
-Since 3.7-beta#
-- Passing of ioctl() parameters between soundcard.c and other modules has been
-changed so that arg always points to kernel space.
-- Some bugfixes.
-
-Since 3.7-beta5
-- Disabled MIDI input with GUS PnP (Interwave). There seems to be constant
-stream of received 0x00 bytes when the MIDI receiver is enabled.
-
-Since 3.5
-- Changes almost everywhere.
-- Support for OPTi 82C924-based sound cards.
-
-Since 3.5.4-beta8
-- Fixed a bug in handling of non-fragment sized writes in 16 bit/stereo mode
-  with GUS.
-- Limited minimum fragment size with some audio devices (GUS=512 and
-  SB=32). These devices require more time to "recover" from processing
-  of each fragment. 
-
-Since 3.5.4-beta6/7
-- There seems to be problems in the OPTi 82C930 so cards based on this
-  chip don't necessarily work yet. There are problems in detecting the 
-  MIDI interface. Also mixer volumes may be seriously wrong on some systems.
-  You can safely use this driver version with C930 if it looks to work.
-  However please don't complain if you have problems with it. C930 support
-  should be fixed in future releases.
-- Got initialization of GUS PnP to work. With this version GUS PnP should
-  work in GUS compatible mode after initialization using isapnptools.
-- Fixed a bug in handling of full duplex cards in write only mode. This has
-  been causing "audio device opening" errors with RealAudio player.
-
-Since 3.5.4.beta5
-- Changes to OPTi 82C930 driver.
-- Major changes to the Soundscape driver. The driver requires now just one
-  DMA channel. The extra audio/dsp device (the "Not functional" one) used
-  for code download in the earlier versions has been eliminated. There is now
-  just one /dev/dsp# device which is used both for code download and audio.
-
-Since 3.5.4.beta4
-- Minor changes.
-
-Since 3.5.4-beta2
-- Fixed silent playback with ESS 688/1688.
-- Got SB16 to work without the 16 bit DMA channel (only the 8 bit one
-  is required for 8 and 16 bit modes).
-- Added the "lowlevel" subdirectory for additional low level drivers that
-  are not part of USS core. See lowlevel/README for more info.
-- Included support for ACI mixer (by Markus Kuhn). ACI is a mixer used in
-  miroPCM sound cards. See lowlevel/aci.readme for more info.
-- Support for Aztech Washington chipset (AZT2316 ASIC).
-
-Since 3.5.4-beta1
-- Reduced clicking with AD1848.
-- Support for OPTi 82C930. Only half duplex at this time. 16 bit playback
-  is sometimes just white noise (occurs randomly).
-
-Since 3.5.2
-- Major changes to the SB/Jazz16/ESS driver (most parts rewritten).
-  The most noticeable new feature is support for multiple SB cards at the same
-  time.
-- Renamed sb16_midi.c to uart401.c. Also modified it to work also with
-  other MPU401 UART compatible cards than SB16/ESS/Jazz.
-- Some changes which reduce clicking in audio playback.
-- Copying policy is now GPL.
-
-Since 3.5.1
-- TB Maui initialization support
-Since 3.5
-- Improved handling of playback underrun situations.
-
-Since 3.5-beta10
-- Bug fixing
-
-Since 3.5-beta9
-- Fixed for compatibility with Linux 1.3.70 and later.
-- Changed boot time passing of 16 bit DMA channel number to SB driver.
-
-Since 3.5-beta8
-- Minor changes
-
-Since 3.5-beta7
-- enhancements to configure program (by Jeff Tranter):
-  - prompts are in same format as 1.3.x Linux kernel config program
-  - on-line help for each question
-  - fixed some compile warnings detected by gcc/g++ -Wall
-  - minor grammatical changes to prompts
-
-Since 3.5-beta6
-- Fixed bugs in mmap() support.
-- Minor changes to Maui driver.
-
-Since 3.5-beta5
-- Fixed crash after recording with ESS688. It's generally a good
-  idea to stop inbound DMA transfers before freeing the memory
-  buffer. 
-- Fixed handling of AD1845 codec (for example Shuttle Sound System).
-- Few other fixes.
-
-Since 3.5-beta4
-- Fixed bug in handling of uninitialized instruments with GUS.
-
-Since 3.5-beta3
-- Few changes which decrease popping at end/beginning of audio playback.
-
-Since 3.5-beta2
-- Removed MAD16+CS4231 hack made in previous version since it didn't
-  help.
-- Fixed the above bug in proper way and in proper place. Many thanks
-  to James Hightower.
-
-Since 3.5-beta1
-- Bug fixes.
-- Full duplex audio with MAD16+CS4231 may work now. The driver configures
-  SB DMA of MAD16 so that it doesn't conflict with codec's DMA channels.
-  The side effect is that all 8 bit DMA channels (0,1,3) are populated in 
-  duplex mode.
-
-Since 3.5-alpha9
-- Bug fixes (mostly in Jazz16 and ESS1688/688 supports).
-- Temporarily disabled recording with ESS1688/688 since it causes crash.
-- Changed audio buffer partitioning algorithm so that it selects
-  smaller fragment size than earlier. This improves real time capabilities
-  of the driver and makes recording to disk to work better. Unfortunately
-  this change breaks some programs which assume that fragments cannot be
-  shorter than 4096 bytes.
-
-Since 3.5-alpha8
-- Bug fixes
-
-Since 3.5-alpha7
-- Linux kernel compatible configuration (_EXPERIMENTAL_). Enable
-  using command "cd /linux/drivers/sound;make script" and then
-  just run kernel's make config normally.
-- Minor fixes to the SB support. Hopefully the driver works with
-  all SB models now.
-- Added support for ESS ES1688 "AudioDrive" based cards.
-
-Since 3.5-alpha6
-- SB Pro and SB16 supports are no longer separately selectable options.
-  Enabling SB enables them too.
-- Changed all #ifndef EXCLUDE_xx stuff to #ifdef CONFIG_xx. Modified
-configure to handle this. 
-- Removed initialization messages from the
-modularized version. They can be enabled by using init_trace=1 in
-the insmod command line (insmod sound init_trace=1).
-- More AIX stuff.
-- Added support for synchronizing dsp/audio devices with /dev/sequencer.
-- mmap() support for dsp/audio devices.
-
-Since 3.5-alpha5
-- AIX port.
-- Changed some xxx_PATCH macros in soundcard.h to work with
-  big endian machines.
-
-Since 3.5-alpha4
-- Removed the 'setfx' stuff from the version distributed with kernel
-  sources. Running 'setfx' is required again.
-
-Since 3.5-alpha3
-- Moved stuff from the 'setfx' program to the AudioTrix Pro driver.
-
-Since 3.5-alpha2
-- Modifications to makefile and configure.c. Unnecessary sources
-  are no longer compiled. Newly created local.h is also copied to
-  /etc/soundconf. "make oldconfig" reads /etc/soundconf and produces
-  new local.h which is compatible with current version of the driver.
-- Some fixes to the SB16 support.
-- Fixed random protection fault in gus_wave.c
-
-Since 3.5-alpha1
-- Modified to work with Linux-1.3.33 and later
-- Some minor changes
-
-Since 3.0.2
-- Support for CS4232 based PnP cards (AcerMagic S23 etc).
-- Full duplex support for some CS4231, CS4232 and AD1845 based cards
-(GUS MAX, AudioTrix Pro, AcerMagic S23 and many MAD16/Mozart cards
-having a codec mentioned above).
-- Almost fully rewritten loadable modules support.
-- Fixed some bugs.
-- Huge amount of testing (more testing is still required).
-- mmap() support (works with some cards). Requires much more testing.
-- Sample/patch/program loading for TB Maui/Tropez. No initialization
-since TB doesn't allow me to release that code.
-- Using CS4231 compatible codecs as timer for /dev/music.
-
-Since 3.0.1
-- Added allocation of I/O ports, DMA channels and interrupts
-to the initialization code. This may break modules support since
-the driver may not free some resources on unload. Should be fixed soon.
-
-Since 3.0
-- Some important bug fixes. 
-- select() for /dev/dsp and /dev/audio (Linux only).
-(To use select() with read, you have to call read() to start
-the recording. Calling write() kills recording immediately so
-use select() carefully when you are writing a half duplex app.
-Full duplex mode is not implemented yet.) Select works also with
-/dev/sequencer and /dev/music. Maybe with /dev/midi## too.
-
-Since 3.0-beta2
-- Minor fixes.
-- Added Readme.cards
-
-Since 3.0-beta1
-- Minor fixes to the modules support.
-- Eliminated call to sb_free_irq() in ad1848.c
-- Rewritten MAD16&Mozart support (not tested with MAD16 Pro).
-- Fix to DMA initialization of PSS cards.
-- Some fixes to ad1848/cs42xx mixer support (GUS MAX, MSS, etc.)
-- Fixed some bugs in the PSS driver which caused I/O errors with
-  the MSS mode (/dev/dsp).
-
-Since 3.0-950506
-- Recording with GUS MAX fixed. It works when the driver is configured
-  to use two DMA channels with GUS MAX (16 bit ones recommended).
-
-Since 3.0-94xxxx
-- Too many changes
-
-Since 3.0-940818
-- Fixes for Linux 1.1.4x.
-- Disables Disney Sound System with SG NX Pro 16 (less noise).
-
-Since 2.90-2
-- Fixes to soundcard.h
-- Non blocking mode to /dev/sequencer
-- Experimental detection code for Ensoniq Soundscape.
-
-Since 2.90
-- Minor and major bug fixes
-
-Since pre-3.0-940712
-- GUS MAX support
-- Partially working MSS/WSS support (could work with some cards).
-- Hardware u-Law and A-Law support with AD1848/CS4248 and CS4231 codecs
-  (GUS MAX, GUS16, WSS etc). Hardware ADPCM is possible with GUS16 and
-  GUS MAX, but it doesn't work yet.
-Since pre-3.0-940426
-- AD1848/CS4248/CS4231 codec support (MSS, GUS MAX, Aztec, Orchid etc).
-This codec chip is used in various sound cards. This version is developed
-for the 16 bit daughtercard of GUS. It should work with other cards also
-if the following requirements are met:
-	- The I/O, IRQ and DMA settings are jumper selectable or
-	the card is initialized by booting DOS before booting Linux (etc.).
-	- You add the IO, IRQ and DMA settings manually to the local.h.
-	  (Just define GUS16_BASE, GUS16_IRQ and GUS16_DMA). Note that
-	the base address bust be the base address of the codec chip not the
-	card itself. For the GUS16 these are the same but most MSS compatible
-	cards have the codec located at card_base+4.
-- Some minor changes
-
-Since 2.5 (******* MAJOR REWRITE ***********)
-
-This version is based on v2.3. I have tried to maintain two versions
-together so that this one should have the same features than v2.5.
-Something may still be missing. If you notice such things, please let me
-know.
-
-The Readme.v30 contains more details.
-
-- /dev/midi## devices.
-- /dev/sequencer2
-
-Since 2.5-beta2
-- Some fine tuning to the GUS v3.7 mixer code.
-- Fixed speed limits for the plain SB (1.0 to 2.0).
-
-Since 2.5-beta
-- Fixed OPL-3 detection with SB. Caused problems with PAS16.
-- GUS v3.7 mixer support.
-
-Since 2.4
-- Mixer support for Sound Galaxy NX Pro (define __SGNXPRO__ on your local.h).
-- Fixed truncated sound on /dev/dsp when the device is closed.
-- Linear volume mode for GUS
-- Pitch bends larger than +/- 2 octaves.
-- MIDI recording for SB and SB Pro. (Untested).
-- Some other fixes.
-- SB16 MIDI and DSP drivers only initialized if SB16 actually installed.
-- Implemented better detection for OPL-3. This should be useful if you
-  have an old SB Pro (the non-OPL-3 one) or a SB 2.0 clone which has a OPL-3.
-- SVR4.2 support by Ian Hartas. Initial ALPHA TEST version (untested).
-
-Since 2.3b
-- Fixed bug which made it impossible to make long recordings to disk.
-  Recording was not restarted after a buffer overflow situation.
-- Limited mixer support for GUS.
-- Numerous improvements to the GUS driver by Andrew Robinson. Including
-  some click removal etc.
-
-Since 2.3
-- Fixed some minor bugs in the SB16 driver.
-
-Since 2.2b
-- Full SB16 DSP support. 8/16 bit, mono/stereo
-- The SCO and FreeBSD versions should be in sync now. There are some
-  problems with SB16 and GUS in the FreeBSD versions.
-  The DMA buffer allocation of the SCO version has been polished but
-  there could still be some problems. At least it hogs memory.
-  The DMA channel
-  configuration method used in the SCO/System is a hack.
-- Support for the MPU emulation of the SB16.
-- Some big arrays are now allocated boot time. This makes the BSS segment
-  smaller which makes it possible to use the full driver with
-  NetBSD. These arrays are not allocated if no suitable sound card is available.
-- Fixed a bug in the compute_and_set_volume in gus_wave.c
-- Fixed the too fast mono playback problem of SB Pro and PAS16.
-
-Since 2.2
-- Stereo recording for SB Pro. Somehow it was missing and nobody
-  had noticed it earlier.
-- Minor polishing.
-- Interpreting of boot time arguments (sound=) for Linux.
-- Breakup of sb_dsp.c. Parts of the code has been moved to
-  sb_mixer.c and sb_midi.c
-
-Since 2.1
-- Preliminary support for SB16. 
-  - The SB16 mixer is supported in its native mode.
-  - Digitized voice capability up to 44.1 kHz/8 bit/mono
-    (16 bit and stereo support coming in the next release).
-- Fixed some bugs in the digitized voice driver for PAS16.
-- Proper initialization of the SB emulation of latest PAS16 models.
-
-- Significantly improved /dev/dsp and /dev/audio support.
-  - Now supports half duplex mode. It's now possible to record and
-    playback without closing and reopening the device.
-  - It's possible to use smaller buffers than earlier. There is a new
-    ioctl(fd, SNDCTL_DSP_SUBDIVIDE, &n) where n should be 1, 2 or 4.
-    This call instructs the driver to use smaller buffers. The default
-    buffer size (0.5 to 1.0 seconds) is divided by n. Should be called
-    immediately after opening the device.
-
-Since 2.0
-Just cosmetic changes. 
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
deleted file mode 100644
index 4033fe58f0cf..000000000000
--- a/sound/oss/Kconfig
+++ /dev/null
@@ -1,533 +0,0 @@
-# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
-# More hacking for modularisation.
-#
-# Prompt user for primary drivers.
-
-config SOUND_BCM_CS4297A
-	tristate "Crystal Sound CS4297a (for Swarm)"
-	depends on SIBYTE_SWARM
-	help
-	  The BCM91250A has a Crystal CS4297a on synchronous serial
-	  port B (in addition to the DB-9 serial port).  Say Y or M
-	  here to enable the sound chip instead of the UART.  Also
-	  note that CONFIG_KGDB should not be enabled at the same
-	  time, since it also attempts to use this UART port.
-
-config SOUND_MSNDCLAS
-	tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
-	depends on (m || !STANDALONE) && ISA
-	help
-	  Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
-	  Monterey (not for the Pinnacle or Fiji).
-
-	  See <file:Documentation/sound/oss/MultiSound> for important information
-	  about this driver.  Note that it has been discontinued, but the
-	  Voyetra Turtle Beach knowledge base entry for it is still available
-	  at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
-
-comment "Compiled-in MSND Classic support requires firmware during compilation."
-	depends on SOUND_PRIME && SOUND_MSNDCLAS=y
-
-config MSNDCLAS_HAVE_BOOT
-	bool
-	depends on SOUND_MSNDCLAS=y && !STANDALONE
-	default y
-
-config MSNDCLAS_INIT_FILE
-	string "Full pathname of MSNDINIT.BIN firmware file"
-	depends on SOUND_MSNDCLAS
-	default "/etc/sound/msndinit.bin"
-	help
-	  The MultiSound cards have two firmware files which are required for
-	  operation, and are not currently included. These files can be
-	  obtained from Turtle Beach. See
-	  <file:Documentation/sound/oss/MultiSound> for information on how to
-	  obtain this.
-
-config MSNDCLAS_PERM_FILE
-	string "Full pathname of MSNDPERM.BIN firmware file"
-	depends on SOUND_MSNDCLAS
-	default "/etc/sound/msndperm.bin"
-	help
-	  The MultiSound cards have two firmware files which are required for
-	  operation, and are not currently included. These files can be
-	  obtained from Turtle Beach. See
-	  <file:Documentation/sound/oss/MultiSound> for information on how to
-	  obtain this.
-
-config MSNDCLAS_IRQ
-	int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
-	depends on SOUND_MSNDCLAS=y
-	default "5"
-	help
-	  Interrupt Request line for the MultiSound Classic and related cards.
-
-config MSNDCLAS_MEM
-	hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
-	depends on SOUND_MSNDCLAS=y
-	default "D0000"
-	help
-	  Memory-mapped I/O base address for the MultiSound Classic and
-	  related cards.
-
-config MSNDCLAS_IO
-	hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
-	depends on SOUND_MSNDCLAS=y
-	default "290"
-	help
-	  I/O port address for the MultiSound Classic and related cards.
-
-config SOUND_MSNDPIN
-	tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
-	depends on (m || !STANDALONE) && ISA
-	help
-	  Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
-	  See <file:Documentation/sound/oss/MultiSound> for important information
-	  about this driver. Note that it has been discontinued, but the
-	  Voyetra Turtle Beach knowledge base entry for it is still available
-	  at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
-
-comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
-	depends on SOUND_PRIME && SOUND_MSNDPIN=y
-
-config MSNDPIN_HAVE_BOOT
-	bool
-	depends on SOUND_MSNDPIN=y
-	default y
-
-config MSNDPIN_INIT_FILE
-	string "Full pathname of PNDSPINI.BIN firmware file"
-	depends on SOUND_MSNDPIN
-	default "/etc/sound/pndspini.bin"
-	help
-	  The MultiSound cards have two firmware files which are required
-	  for operation, and are not currently included. These files can be
-	  obtained from Turtle Beach. See
-	  <file:Documentation/sound/oss/MultiSound> for information on how to
-	  obtain this.
-
-config MSNDPIN_PERM_FILE
-	string "Full pathname of PNDSPERM.BIN firmware file"
-	depends on SOUND_MSNDPIN
-	default "/etc/sound/pndsperm.bin"
-	help
-	  The MultiSound cards have two firmware files which are required for
-	  operation, and are not currently included. These files can be
-	  obtained from Turtle Beach. See
-	  <file:Documentation/sound/oss/MultiSound> for information on how to
-	  obtain this.
-
-config MSNDPIN_IRQ
-	int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
-	depends on SOUND_MSNDPIN=y
-	default "5"
-	help
-	  Interrupt request line for the primary synthesizer on MultiSound
-	  Pinnacle and Fiji sound cards.
-
-config MSNDPIN_MEM
-	hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
-	depends on SOUND_MSNDPIN=y
-	default "D0000"
-	help
-	  Memory-mapped I/O base address for the primary synthesizer on
-	  MultiSound Pinnacle and Fiji sound cards.
-
-config MSNDPIN_IO
-	hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
-	depends on SOUND_MSNDPIN=y
-	default "290"
-	help
-	  Memory-mapped I/O base address for the primary synthesizer on
-	  MultiSound Pinnacle and Fiji sound cards.
-
-config MSNDPIN_DIGITAL
-	bool "MSND Pinnacle has S/PDIF I/O"
-	depends on SOUND_MSNDPIN=y
-	help
-	  If you have the S/PDIF daughter board for the Pinnacle or Fiji,
-	  answer Y here; otherwise, say N. If you have this, you will be able
-	  to play and record from the S/PDIF port (digital signal). See
-	  <file:Documentation/sound/oss/MultiSound> for information on how to make
-	  use of this capability.
-
-config MSNDPIN_NONPNP
-	bool "MSND Pinnacle non-PnP Mode"
-	depends on SOUND_MSNDPIN=y
-	help
-	  The Pinnacle and Fiji card resources can be configured either with
-	  PnP, or through a configuration port. Say Y here if your card is NOT
-	  in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
-	  use of the IDE and joystick peripherals on the card as well; these
-	  do not show up when the card is in PnP mode. Specifying zero for any
-	  resource of a device will disable the device. If you are running the
-	  card in PnP mode, you must say N here and use isapnptools to
-	  configure the card's resources.
-
-comment "MSND Pinnacle DSP section will be configured to above parameters."
-	depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP
-
-config MSNDPIN_CFG
-	hex "MSND Pinnacle config port 250,260,270"
-	depends on MSNDPIN_NONPNP
-	default "250"
-	help
-	  This is the port which the Pinnacle and Fiji uses to configure the
-	  card's resources when not in PnP mode. If your card is in PnP mode,
-	  then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
-	  Mode".
-
-comment "Pinnacle-specific Device Configuration (0 disables)"
-	depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP
-
-config MSNDPIN_MPU_IO
-	hex "MSND Pinnacle MPU I/O (e.g. 330)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  Memory-mapped I/O base address for the Kurzweil daughterboard
-	  synthesizer on MultiSound Pinnacle and Fiji sound cards.
-
-config MSNDPIN_MPU_IRQ
-	int "MSND Pinnacle MPU IRQ (e.g. 9)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  Interrupt request number for the Kurzweil daughterboard
-	  synthesizer on MultiSound Pinnacle and Fiji sound cards.
-
-config MSNDPIN_IDE_IO0
-	hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
-	  Pinnacle and Fiji sound cards.
-
-config MSNDPIN_IDE_IO1
-	hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
-	  Pinnacle and Fiji sound cards.
-
-config MSNDPIN_IDE_IRQ
-	int "MSND Pinnacle IDE IRQ (e.g. 15)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  Interrupt request number for the IDE CD-ROM interface on the
-	  MultiSound Pinnacle and Fiji sound cards.
-
-config MSNDPIN_JOYSTICK_IO
-	hex "MSND Pinnacle joystick I/O (e.g. 200)"
-	depends on MSNDPIN_NONPNP
-	default "0"
-	help
-	  Memory-mapped I/O base address for the joystick port on MultiSound
-	  Pinnacle and Fiji sound cards.
-
-config MSND_FIFOSIZE
-	int "MSND buffer size (kB)"
-	depends on SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y
-	default "128"
-	help
-	  Configures the size of each audio buffer, in kilobytes, for
-	  recording and playing in the MultiSound drivers (both the Classic
-	  and Pinnacle). Larger values reduce the chance of data overruns at
-	  the expense of overall latency. If unsure, use the default.
-
-menuconfig SOUND_OSS
-	tristate "OSS sound modules"
-	depends on ISA_DMA_API && (VIRT_TO_BUS || ARCH_RPC || ARCH_NETWINDER)
-	depends on !GENERIC_ISA_DMA_SUPPORT_BROKEN
-	help
-	  OSS is the Open Sound System suite of sound card drivers.  They make
-	  sound programming easier since they provide a common API.  Say Y or
-	  M here (the module will be called sound) if you haven't found a
-	  driver for your sound card above, then pick your driver from the
-	  list below.
-
-if SOUND_OSS
-
-config SOUND_TRACEINIT
-	bool "Verbose initialisation"
-	help
-	  Verbose soundcard initialization -- affects the format of autoprobe
-	  and initialization messages at boot time.
-
-config SOUND_DMAP
-	bool "Persistent DMA buffers"
-	---help---
-	  Linux can often have problems allocating DMA buffers for ISA sound
-	  cards on machines with more than 16MB of RAM. This is because ISA
-	  DMA buffers must exist below the 16MB boundary and it is quite
-	  possible that a large enough free block in this region cannot be
-	  found after the machine has been running for a while. If you say Y
-	  here the DMA buffers (64Kb) will be allocated at boot time and kept
-	  until the shutdown. This option is only useful if you said Y to
-	  "OSS sound modules", above. If you said M to "OSS sound modules"
-	  then you can get the persistent DMA buffer functionality by passing
-	  the command-line argument "dmabuf=1" to the sound module.
-
-	  Say Y unless you have 16MB or more RAM or a PCI sound card.
-
-config SOUND_VMIDI
-	tristate "Loopback MIDI device support"
-	help
-	  Support for MIDI loopback on port 1 or 2.
-
-config SOUND_TRIX
-	tristate "MediaTrix AudioTrix Pro support"
-	help
-	  Answer Y if you have the AudioTriX Pro sound card manufactured
-	  by MediaTrix.
-
-config TRIX_HAVE_BOOT
-	bool "Have TRXPRO.HEX firmware file"
-	depends on SOUND_TRIX=y && !STANDALONE
-	help
-	  The MediaTrix AudioTrix Pro has an on-board microcontroller which
-	  needs to be initialized by downloading the code from the file
-	  TRXPRO.HEX in the DOS driver directory. If you don't have the
-	  TRXPRO.HEX file handy you may skip this step. However, the SB and
-	  MPU-401 modes of AudioTrix Pro will not work without this file!
-
-config TRIX_BOOT_FILE
-	string "Full pathname of TRXPRO.HEX firmware file"
-	depends on TRIX_HAVE_BOOT
-	default "/etc/sound/trxpro.hex"
-	help
-	  Enter the full pathname of your TRXPRO.HEX file, starting from /.
-
-config SOUND_MSS
-	tristate "Microsoft Sound System support"
-	---help---
-	  Again think carefully before answering Y to this question.  It's
-	  safe to answer Y if you have the original Windows Sound System card
-	  made by Microsoft or Aztech SG 16 Pro (or NX16 Pro).  Also you may
-	  say Y in case your card is NOT among these:
-
-	  ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
-	  Ensoniq SoundScape (and compatibles made by Reveal and Spea),
-	  Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
-	  Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
-	  Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
-	  82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
-	  Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
-	  SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
-	  Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
-	  Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
-	  Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
-	  notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
-	  synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
-
-	  For cards having native support in VoxWare, consult the card
-	  specific instructions in <file:Documentation/sound/oss/README.OSS>.
-	  Some drivers have their own MSS support and saying Y to this option
-	  will cause a conflict.
-
-	  If you compile the driver into the kernel, you have to add
-	  "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
-	  line.
-
-config SOUND_MPU401
-	tristate "MPU-401 support (NOT for SB16)"
-	---help---
-	  Be careful with this question.  The MPU401 interface is supported by
-	  all sound cards.  However, some natively supported cards have their
-	  own driver for MPU401.  Enabling this MPU401 option with these cards
-	  will cause a conflict.  Also, enabling MPU401 on a system that
-	  doesn't really have a MPU401 could cause some trouble.  If your card
-	  was in the list of supported cards, look at the card specific
-	  instructions in the <file:Documentation/sound/oss/README.OSS> file.  It
-	  is safe to answer Y if you have a true MPU401 MIDI interface card.
-
-	  If you compile the driver into the kernel, you have to add
-	  "mpu401=<io>,<irq>" to the kernel command line.
-
-config SOUND_PAS
-	tristate "ProAudioSpectrum 16 support"
-	---help---
-	  Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
-	  16 or Logitech SoundMan 16 sound card. Answer N if you have some
-	  other card made by Media Vision or Logitech since those are not
-	  PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
-	  It is not necessary to add Sound Blaster support separately; it
-	  is included in PAS support.
-
-	  If you compile the driver into the kernel, you have to add
-	  "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
-	  to the kernel command line.
-
-config PAS_JOYSTICK
-	bool "Enable PAS16 joystick port"
-	depends on SOUND_PAS=y
-	help
-	  Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
-	  port.
-
-config SOUND_PSS
-	tristate "PSS (AD1848, ADSP-2115, ESC614) support"
-	help
-	  Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
-	  ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
-	  ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
-	  how to compile it into the kernel or as a module see the file
-	  <file:Documentation/sound/oss/PSS>.
-
-	  If you compile the driver into the kernel, you have to add
-	  "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
-	  command line.
-
-config PSS_MIXER
-	bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
-	depends on SOUND_PSS
-	help
-	  Answer Y for Beethoven ADSP-16. You may try to say Y also for other
-	  cards if they have master volume, bass, treble, and you can't
-	  control it under Linux. If you answer N for Beethoven ADSP-16, you
-	  can't control master volume, bass, treble and synth volume.
-
-	  If you said M to "PSS support" above, you may enable or disable this
-	  PSS mixer with the module parameter pss_mixer. For more information
-	  see the file <file:Documentation/sound/oss/PSS>.
-
-config PSS_HAVE_BOOT
-	bool "Have DSPxxx.LD firmware file"
-	depends on SOUND_PSS && !STANDALONE
-	help
-	  If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
-	  to include this file. Without this file the synth device (OPL) may
-	  not work.
-
-config PSS_BOOT_FILE
-	string "Full pathname of DSPxxx.LD firmware file"
-	depends on PSS_HAVE_BOOT
-	default "/etc/sound/dsp001.ld"
-	help
-	  Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
-	  starting from /.
-
-config SOUND_SB
-	tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
-	---help---
-	  Answer Y if you have an original Sound Blaster card made by Creative
-	  Labs or a 100% hardware compatible clone (like the Thunderboard or
-	  SM Games). For an unknown card you may answer Y if the card claims
-	  to be Sound Blaster-compatible.
-
-	  Please read the file <file:Documentation/sound/oss/Soundblaster>.
-
-	  You should also say Y here for cards based on the Avance Logic
-	  ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
-	  for cards based on ESS chips (read
-	  <file:Documentation/sound/oss/ESS1868> and
-	  <file:Documentation/sound/oss/ESS>). If you have an IBM Mwave
-	  card, say Y here and read <file:Documentation/sound/oss/mwave>.
-
-	  If you compile the driver into the kernel and don't want to use
-	  isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
-	  command line.
-
-	  You can say M here to compile this driver as a module; the module is
-	  called sb.
-
-config SOUND_YM3812
-	tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
-	---help---
-	  Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
-	  Answering Y is usually a safe and recommended choice, however some
-	  cards may have software (TSR) FM emulation. Enabling FM support with
-	  these cards may cause trouble (I don't currently know of any such
-	  cards, however). Please read the file
-	  <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
-
-	  If you compile the driver into the kernel, you have to add
-	  "opl3=<io>" to the kernel command line.
-
-	  If unsure, say Y.
-
-config SOUND_UART6850
-	tristate "6850 UART support"
-	help
-	  This option enables support for MIDI interfaces based on the 6850
-	  UART chip. This interface is rarely found on sound cards. It's safe
-	  to answer N to this question.
-
-	  If you compile the driver into the kernel, you have to add
-	  "uart6850=<io>,<irq>" to the kernel command line.
-
-config SOUND_AEDSP16
-	tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
-	---help---
-	  Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
-	  driver supports Audio Excel DSP 16 but not the III nor PnP versions
-	  of this card.
-
-	  The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
-	  a Microsoft Sound System card, so you should have said Y to either
-	  "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
-	  or "Microsoft Sound System support", above, and you need to answer
-	  the "MSS emulation" and "SBPro emulation" questions below
-	  accordingly. You should say Y to one and only one of these two
-	  questions.
-
-	  Read the <file:Documentation/sound/oss/README.OSS> file and the head of
-	  <file:sound/oss/aedsp16.c> as well as
-	  <file:Documentation/sound/oss/AudioExcelDSP16> to get more information
-	  about this driver and its configuration.
-
-config SC6600
-	bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
-	depends on SOUND_AEDSP16
-	help
-	  The SC6600 is the new version of DSP mounted on the Audio Excel DSP
-	  16 cards. Find in the manual the FCC ID of your audio card and
-	  answer Y if you have an SC6600 DSP.
-
-config SC6600_JOY
-	bool "Activate SC-6600 Joystick Interface"
-	depends on SC6600
-	help
-	  Say Y here in order to use the joystick interface of the Audio Excel
-	  DSP 16 card.
-
-config SC6600_CDROM
-	int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
-	depends on SC6600
-	default "4"
-	help
-	  This is used to activate the CD-ROM interface of the Audio Excel
-	  DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
-	  CD-ROM present.
-
-config SC6600_CDROMBASE
-	hex "SC-6600 CDROM Interface I/O Address"
-	depends on SC6600
-	default "0"
-	help
-	  Base I/O port address for the CD-ROM interface of the Audio Excel
-	  DSP 16 card.
-
-config SOUND_VIDC
-	tristate "VIDC 16-bit sound"
-	depends on ARM && ARCH_ACORN
-	help
-	  16-bit support for the VIDC onboard sound hardware found on Acorn
-	  machines.
-
-config SOUND_WAVEARTIST
-	tristate "Netwinder WaveArtist"
-	depends on ARM && ARCH_NETWINDER
-	help
-	  Say Y here to include support for the Rockwell WaveArtist sound
-	  system.  This driver is mainly for the NetWinder.
-
-config SOUND_KAHLUA
-	tristate "XpressAudio Sound Blaster emulation"
-	depends on SOUND_SB
-
-endif	# SOUND_OSS
-
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
deleted file mode 100644
index 9bdbbde2173e..000000000000
--- a/sound/oss/Makefile
+++ /dev/null
@@ -1,107 +0,0 @@
-# Makefile for the Linux sound card driver
-#
-# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
-# Rewritten to use lists instead of if-statements.
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_SOUND_OSS)		+= sound.o
-
-# Please leave it as is, cause the link order is significant !
-
-obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
-obj-$(CONFIG_SOUND_PSS)		+= pss.o ad1848.o mpu401.o
-obj-$(CONFIG_SOUND_TRIX)	+= trix.o ad1848.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_MSS)		+= ad1848.o
-obj-$(CONFIG_SOUND_PAS)		+= pas2.o sb.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_SB)		+= sb.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_KAHLUA)	+= kahlua.o
-obj-$(CONFIG_SOUND_MPU401)	+= mpu401.o
-obj-$(CONFIG_SOUND_UART6850)	+= uart6850.o
-obj-$(CONFIG_SOUND_YM3812)	+= opl3.o
-obj-$(CONFIG_SOUND_VMIDI)	+= v_midi.o
-obj-$(CONFIG_SOUND_VIDC)	+= vidc_mod.o
-obj-$(CONFIG_SOUND_WAVEARTIST)	+= waveartist.o
-obj-$(CONFIG_SOUND_MSNDCLAS)	+= msnd.o msnd_classic.o
-obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
-obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
-
-obj-$(CONFIG_DMASOUND)		+= dmasound/
-
-# Declare multi-part drivers.
-
-sound-objs	:= 							\
-    dev_table.o soundcard.o 		\
-    audio.o dmabuf.o					\
-    midi_synth.o midibuf.o					\
-    sequencer.o sound_timer.o sys_timer.o
-
-pas2-objs	:= pas2_card.o pas2_midi.o pas2_mixer.o pas2_pcm.o
-sb-objs		:= sb_card.o
-sb_lib-objs	:= sb_common.o sb_audio.o sb_midi.o sb_mixer.o sb_ess.o
-vidc_mod-objs	:= vidc.o vidc_fill.o
-
-hostprogs-y	:= bin2hex hex2hex
-
-# Files generated that shall be removed upon make clean
-clean-files := msndperm.c msndinit.c pndsperm.c pndspini.c \
-               pss_boot.h trix_boot.h
-
-# Firmware files that need translation
-#
-# The translated files are protected by a file that keeps track
-# of what name was used to build them.  If the name changes, they
-# will be forced to be remade.
-#
-
-# Turtle Beach MultiSound
-
-ifeq ($(CONFIG_MSNDCLAS_HAVE_BOOT),y)
-    $(obj)/msnd_classic.o: $(obj)/msndperm.c $(obj)/msndinit.c
-
-    $(obj)/msndperm.c: $(patsubst "%", %, $(CONFIG_MSNDCLAS_PERM_FILE)) $(obj)/bin2hex
-	$(obj)/bin2hex msndperm < $< > $@
-
-    $(obj)/msndinit.c: $(patsubst "%", %, $(CONFIG_MSNDCLAS_INIT_FILE)) $(obj)/bin2hex
-	$(obj)/bin2hex msndinit < $< > $@
-endif
-
-ifeq ($(CONFIG_MSNDPIN_HAVE_BOOT),y)
-    $(obj)/msnd_pinnacle.o: $(obj)/pndsperm.c $(obj)/pndspini.c
-
-    $(obj)/pndsperm.c: $(patsubst "%", %, $(CONFIG_MSNDPIN_PERM_FILE)) $(obj)/bin2hex
-	$(obj)/bin2hex pndsperm < $< > $@
-
-    $(obj)/pndspini.c: $(patsubst "%", %, $(CONFIG_MSNDPIN_INIT_FILE)) $(obj)/bin2hex
-	$(obj)/bin2hex pndspini < $< > $@
-endif
-
-# PSS (ECHO-ADI2111)
-
-$(obj)/pss.o: $(obj)/pss_boot.h
-
-ifeq ($(CONFIG_PSS_HAVE_BOOT),y)
-    $(obj)/pss_boot.h: $(patsubst "%", %, $(CONFIG_PSS_BOOT_FILE)) $(obj)/bin2hex
-	$(obj)/bin2hex pss_synth < $< > $@
-else
-    $(obj)/pss_boot.h:
-	$(Q)(							\
-	    echo 'static unsigned char * pss_synth = NULL;';	\
-	    echo 'static int pss_synthLen = 0;';		\
-	) > $@
-endif
-
-# MediaTrix AudioTrix Pro
-
-$(obj)/trix.o: $(obj)/trix_boot.h
-
-ifeq ($(CONFIG_TRIX_HAVE_BOOT),y)
-    $(obj)/trix_boot.h: $(patsubst "%", %, $(CONFIG_TRIX_BOOT_FILE)) $(obj)/hex2hex
-	$(obj)/hex2hex -i trix_boot < $< > $@
-else
-    $(obj)/trix_boot.h:
-	$(Q)(							\
-	    echo 'static unsigned char * trix_boot = NULL;';	\
-	    echo 'static int trix_boot_len = 0;';		\
-	) > $@
-endif
diff --git a/sound/oss/README.FIRST b/sound/oss/README.FIRST
deleted file mode 100644
index 90fdcf063d2d..000000000000
--- a/sound/oss/README.FIRST
+++ /dev/null
@@ -1,6 +0,0 @@
-The modular sound driver patches were funded by Red Hat Software 
-(www.redhat.com). The sound driver here is thus a modified version of 
-Hannu's code. Please bear that in mind when considering the appropriate
-forums for bug reporting. 
-
-Alan Cox
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c
deleted file mode 100644
index 2421f59cf279..000000000000
--- a/sound/oss/ad1848.c
+++ /dev/null
@@ -1,3062 +0,0 @@
-/*
- * sound/oss/ad1848.c
- *
- * The low level driver for the AD1848/CS4248 codec chip which
- * is used for example in the MS Sound System.
- *
- * The CS4231 which is used in the GUS MAX and some other cards is
- * upwards compatible with AD1848 and this driver is able to drive it.
- *
- * CS4231A and AD1845 are upward compatible with CS4231. However
- * the new features of these chips are different.
- *
- * CS4232 is a PnP audio chip which contains a CS4231A (and SB, MPU).
- * CS4232A is an improved version of CS4232.
- *
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer	: ioctl code reworked (vmalloc/vfree removed)
- *			  general sleep/wakeup clean up.
- * Alan Cox		: reformatted. Fixed SMP bugs. Moved to kernel alloc/free
- *		          of irqs. Use dev_id.
- * Christoph Hellwig	: adapted to module_init/module_exit
- * Aki Laukkanen	: added power management support
- * Arnaldo C. de Melo	: added missing restore_flags in ad1848_resume
- * Miguel Freitas       : added ISA PnP support
- * Alan Cox		: Added CS4236->4239 identification
- * Daniel T. Cobra	: Alernate config/mixer for later chips
- * Alan Cox		: Merged chip idents and config code
- *
- * TODO
- *		APM save restore assist code on IBM thinkpad
- *
- * Status:
- *		Tested. Believed fully functional.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/isapnp.h>
-#include <linux/pnp.h>
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-
-#include "ad1848.h"
-#include "ad1848_mixer.h"
-
-typedef struct
-{
-	spinlock_t	lock;
-	int             base;
-	int             irq;
-	int             dma1, dma2;
-	int             dual_dma;	/* 1, when two DMA channels allocated */
-	int 		subtype;
-	unsigned char   MCE_bit;
-	unsigned char   saved_regs[64];	/* Includes extended register space */
-	int             debug_flag;
-
-	int             audio_flags;
-	int             record_dev, playback_dev;
-
-	int             xfer_count;
-	int             audio_mode;
-	int             open_mode;
-	int             intr_active;
-	char           *chip_name, *name;
-	int             model;
-#define MD_1848		1
-#define MD_4231		2
-#define MD_4231A	3
-#define MD_1845		4
-#define MD_4232		5
-#define MD_C930		6
-#define MD_IWAVE	7
-#define MD_4235         8 /* Crystal Audio CS4235  */
-#define MD_1845_SSCAPE  9 /* Ensoniq Soundscape PNP*/
-#define MD_4236		10 /* 4236 and higher */
-#define MD_42xB		11 /* CS 42xB */
-#define MD_4239		12 /* CS4239 */
-
-	/* Mixer parameters */
-	int             recmask;
-	int             supported_devices, orig_devices;
-	int             supported_rec_devices, orig_rec_devices;
-	int            *levels;
-	short           mixer_reroute[32];
-	int             dev_no;
-	volatile unsigned long timer_ticks;
-	int             timer_running;
-	int             irq_ok;
-	mixer_ents     *mix_devices;
-	int             mixer_output_port;
-} ad1848_info;
-
-typedef struct ad1848_port_info
-{
-	int             open_mode;
-	int             speed;
-	unsigned char   speed_bits;
-	int             channels;
-	int             audio_format;
-	unsigned char   format_bits;
-}
-ad1848_port_info;
-
-static struct address_info cfg;
-static int nr_ad1848_devs;
-
-static bool deskpro_xl;
-static bool deskpro_m;
-static bool soundpro;
-
-#ifndef EXCLUDE_TIMERS
-static int timer_installed = -1;
-#endif
-
-static int loaded;
-
-static int ad_format_mask[13 /*devc->model */ ] =
-{
-	0,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,	/* AD1845 */
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE /* CS4235 */,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW	/* Ensoniq Soundscape*/,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
-	AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM
-};
-
-static ad1848_info adev_info[MAX_AUDIO_DEV];
-
-#define io_Index_Addr(d)	((d)->base)
-#define io_Indexed_Data(d)	((d)->base+1)
-#define io_Status(d)		((d)->base+2)
-#define io_Polled_IO(d)		((d)->base+3)
-
-static struct {
-     unsigned char flags;
-#define CAP_F_TIMER 0x01     
-} capabilities [10 /*devc->model */ ] = {
-     {0}
-    ,{0}           /* MD_1848  */
-    ,{CAP_F_TIMER} /* MD_4231  */
-    ,{CAP_F_TIMER} /* MD_4231A */
-    ,{CAP_F_TIMER} /* MD_1845  */
-    ,{CAP_F_TIMER} /* MD_4232  */
-    ,{0}           /* MD_C930  */
-    ,{CAP_F_TIMER} /* MD_IWAVE */
-    ,{0}           /* MD_4235  */
-    ,{CAP_F_TIMER} /* MD_1845_SSCAPE */
-};
-
-#ifdef CONFIG_PNP
-static int isapnp	= 1;
-static int isapnpjump;
-static bool reverse;
-
-static int audio_activated;
-#else
-static int isapnp;
-#endif
-
-
-
-static int      ad1848_open(int dev, int mode);
-static void     ad1848_close(int dev);
-static void     ad1848_output_block(int dev, unsigned long buf, int count, int intrflag);
-static void     ad1848_start_input(int dev, unsigned long buf, int count, int intrflag);
-static int      ad1848_prepare_for_output(int dev, int bsize, int bcount);
-static int      ad1848_prepare_for_input(int dev, int bsize, int bcount);
-static void     ad1848_halt(int dev);
-static void     ad1848_halt_input(int dev);
-static void     ad1848_halt_output(int dev);
-static void     ad1848_trigger(int dev, int bits);
-static irqreturn_t adintr(int irq, void *dev_id);
-
-#ifndef EXCLUDE_TIMERS
-static int ad1848_tmr_install(int dev);
-static void ad1848_tmr_reprogram(int dev);
-#endif
-
-static int ad_read(ad1848_info * devc, int reg)
-{
-	int x;
-	int timeout = 900000;
-
-	while (timeout > 0 && inb(devc->base) == 0x80)	/*Are we initializing */
-		timeout--;
-
-	if(reg < 32)
-	{
-		outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
-		x = inb(io_Indexed_Data(devc));
-	}
-	else
-	{
-		int xreg, xra;
-
-		xreg = (reg & 0xff) - 32;
-		xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
-		outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
-		outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
-		x = inb(io_Indexed_Data(devc));
-	}
-
-	return x;
-}
-
-static void ad_write(ad1848_info * devc, int reg, int data)
-{
-	int timeout = 900000;
-
-	while (timeout > 0 && inb(devc->base) == 0x80)	/* Are we initializing */
-		timeout--;
-
-	if(reg < 32)
-	{
-		outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
-		outb(((unsigned char) (data & 0xff)), io_Indexed_Data(devc));
-	}
-	else
-	{
-		int xreg, xra;
-		
-		xreg = (reg & 0xff) - 32;
-		xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
-		outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
-		outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
-		outb((unsigned char) (data & 0xff), io_Indexed_Data(devc));
-	}
-}
-
-static void wait_for_calibration(ad1848_info * devc)
-{
-	int timeout;
-
-	/*
-	 * Wait until the auto calibration process has finished.
-	 *
-	 * 1)       Wait until the chip becomes ready (reads don't return 0x80).
-	 * 2)       Wait until the ACI bit of I11 gets on and then off.
-	 */
-
-	timeout = 100000;
-	while (timeout > 0 && inb(devc->base) == 0x80)
-		timeout--;
-	if (inb(devc->base) & 0x80)
-		printk(KERN_WARNING "ad1848: Auto calibration timed out(1).\n");
-
-	timeout = 100;
-	while (timeout > 0 && !(ad_read(devc, 11) & 0x20))
-		timeout--;
-	if (!(ad_read(devc, 11) & 0x20))
-		return;
-
-	timeout = 80000;
-	while (timeout > 0 && (ad_read(devc, 11) & 0x20))
-		timeout--;
-	if (ad_read(devc, 11) & 0x20)
-		if ((devc->model != MD_1845) && (devc->model != MD_1845_SSCAPE))
-			printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n");
-}
-
-static void ad_mute(ad1848_info * devc)
-{
-	int i;
-	unsigned char prev;
-
-	/*
-	 * Save old register settings and mute output channels
-	 */
-	 
-	for (i = 6; i < 8; i++)
-	{
-		prev = devc->saved_regs[i] = ad_read(devc, i);
-	}
-
-}
-
-static void ad_unmute(ad1848_info * devc)
-{
-}
-
-static void ad_enter_MCE(ad1848_info * devc)
-{
-	int timeout = 1000;
-	unsigned short prev;
-
-	while (timeout > 0 && inb(devc->base) == 0x80)	/*Are we initializing */
-		timeout--;
-
-	devc->MCE_bit = 0x40;
-	prev = inb(io_Index_Addr(devc));
-	if (prev & 0x40)
-	{
-		return;
-	}
-	outb((devc->MCE_bit), io_Index_Addr(devc));
-}
-
-static void ad_leave_MCE(ad1848_info * devc)
-{
-	unsigned char prev, acal;
-	int timeout = 1000;
-
-	while (timeout > 0 && inb(devc->base) == 0x80)	/*Are we initializing */
-		timeout--;
-
-	acal = ad_read(devc, 9);
-
-	devc->MCE_bit = 0x00;
-	prev = inb(io_Index_Addr(devc));
-	outb((0x00), io_Index_Addr(devc));	/* Clear the MCE bit */
-
-	if ((prev & 0x40) == 0)	/* Not in MCE mode */
-	{
-		return;
-	}
-	outb((0x00), io_Index_Addr(devc));	/* Clear the MCE bit */
-	if (acal & 0x08)	/* Auto calibration is enabled */
-		wait_for_calibration(devc);
-}
-
-static int ad1848_set_recmask(ad1848_info * devc, int mask)
-{
-	unsigned char   recdev;
-	int             i, n;
-	unsigned long flags;
-
-	mask &= devc->supported_rec_devices;
-
-	/* Rename the mixer bits if necessary */
-	for (i = 0; i < 32; i++)
-	{
-		if (devc->mixer_reroute[i] != i)
-		{
-			if (mask & (1 << i))
-			{
-				mask &= ~(1 << i);
-				mask |= (1 << devc->mixer_reroute[i]);
-			}
-		}
-	}
-	
-	n = 0;
-	for (i = 0; i < 32; i++)	/* Count selected device bits */
-		if (mask & (1 << i))
-			n++;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	if (!soundpro) {
-		if (n == 0)
-			mask = SOUND_MASK_MIC;
-		else if (n != 1) {	/* Too many devices selected */
-			mask &= ~devc->recmask;	/* Filter out active settings */
-
-			n = 0;
-			for (i = 0; i < 32; i++)	/* Count selected device bits */
-				if (mask & (1 << i))
-					n++;
-
-			if (n != 1)
-				mask = SOUND_MASK_MIC;
-		}
-		switch (mask) {
-		case SOUND_MASK_MIC:
-			recdev = 2;
-			break;
-
-		case SOUND_MASK_LINE:
-		case SOUND_MASK_LINE3:
-			recdev = 0;
-			break;
-
-		case SOUND_MASK_CD:
-		case SOUND_MASK_LINE1:
-			recdev = 1;
-			break;
-
-		case SOUND_MASK_IMIX:
-			recdev = 3;
-			break;
-
-		default:
-			mask = SOUND_MASK_MIC;
-			recdev = 2;
-		}
-
-		recdev <<= 6;
-		ad_write(devc, 0, (ad_read(devc, 0) & 0x3f) | recdev);
-		ad_write(devc, 1, (ad_read(devc, 1) & 0x3f) | recdev);
-	} else { /* soundpro */
-		unsigned char val;
-		int set_rec_bit;
-		int j;
-
-		for (i = 0; i < 32; i++) {	/* For each bit */
-			if ((devc->supported_rec_devices & (1 << i)) == 0)
-				continue;	/* Device not supported */
-
-			for (j = LEFT_CHN; j <= RIGHT_CHN; j++) {
-				if (devc->mix_devices[i][j].nbits == 0) /* Inexistent channel */
-					continue;
-
-				/*
-				 * This is tricky:
-				 * set_rec_bit becomes 1 if the corresponding bit in mask is set
-				 * then it gets flipped if the polarity is inverse
-				 */
-				set_rec_bit = ((mask & (1 << i)) != 0) ^ devc->mix_devices[i][j].recpol;
-
-				val = ad_read(devc, devc->mix_devices[i][j].recreg);
-				val &= ~(1 << devc->mix_devices[i][j].recpos);
-				val |= (set_rec_bit << devc->mix_devices[i][j].recpos);
-				ad_write(devc, devc->mix_devices[i][j].recreg, val);
-			}
-		}
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	/* Rename the mixer bits back if necessary */
-	for (i = 0; i < 32; i++)
-	{
-		if (devc->mixer_reroute[i] != i)
-		{
-			if (mask & (1 << devc->mixer_reroute[i]))
-			{
-				mask &= ~(1 << devc->mixer_reroute[i]);
-				mask |= (1 << i);
-			}
-		}
-	}
-	devc->recmask = mask;
-	return mask;
-}
-
-static void oss_change_bits(ad1848_info *devc, unsigned char *regval,
-			unsigned char *muteval, int dev, int chn, int newval)
-{
-	unsigned char mask;
-	int shift;
-	int mute;
-	int mutemask;
-	int set_mute_bit;
-
-	set_mute_bit = (newval == 0) ^ devc->mix_devices[dev][chn].mutepol;
-
-	if (devc->mix_devices[dev][chn].polarity == 1)	/* Reverse */
-		newval = 100 - newval;
-
-	mask = (1 << devc->mix_devices[dev][chn].nbits) - 1;
-	shift = devc->mix_devices[dev][chn].bitpos;
-
-	if (devc->mix_devices[dev][chn].mutepos == 8)
-	{			/* if there is no mute bit */
-		mute = 0;	/* No mute bit; do nothing special */
-		mutemask = ~0;	/* No mute bit; do nothing special */
-	}
-	else
-	{
-		mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos);
-		mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos);
-	}
-
-	newval = (int) ((newval * mask) + 50) / 100;	/* Scale it */
-	*regval &= ~(mask << shift);			/* Clear bits */
-	*regval |= (newval & mask) << shift;		/* Set new value */
-
-	*muteval &= mutemask;
-	*muteval |= mute;
-}
-
-static int ad1848_mixer_get(ad1848_info * devc, int dev)
-{
-	if (!((1 << dev) & devc->supported_devices))
-		return -EINVAL;
-
-	dev = devc->mixer_reroute[dev];
-
-	return devc->levels[dev];
-}
-
-static void ad1848_mixer_set_channel(ad1848_info *devc, int dev, int value, int channel)
-{
-	int regoffs, muteregoffs;
-	unsigned char val, muteval;
-	unsigned long flags;
-
-	regoffs = devc->mix_devices[dev][channel].regno;
-	muteregoffs = devc->mix_devices[dev][channel].mutereg;
-	val = ad_read(devc, regoffs);
-
-	if (muteregoffs != regoffs) {
-		muteval = ad_read(devc, muteregoffs);
-		oss_change_bits(devc, &val, &muteval, dev, channel, value);
-	}
-	else
-		oss_change_bits(devc, &val, &val, dev, channel, value);
-
-	spin_lock_irqsave(&devc->lock,flags);
-	ad_write(devc, regoffs, val);
-	devc->saved_regs[regoffs] = val;
-	if (muteregoffs != regoffs) {
-		ad_write(devc, muteregoffs, muteval);
-		devc->saved_regs[muteregoffs] = muteval;
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static int ad1848_mixer_set(ad1848_info * devc, int dev, int value)
-{
-	int left = value & 0x000000ff;
-	int right = (value & 0x0000ff00) >> 8;
-	int retvol;
-
-	if (dev > 31)
-		return -EINVAL;
-
-	if (!(devc->supported_devices & (1 << dev)))
-		return -EINVAL;
-
-	dev = devc->mixer_reroute[dev];
-
-	if (devc->mix_devices[dev][LEFT_CHN].nbits == 0)
-		return -EINVAL;
-
-	if (left > 100)
-		left = 100;
-	if (right > 100)
-		right = 100;
-
-	if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0)	/* Mono control */
-		right = left;
-
-	retvol = left | (right << 8);
-
-	/* Scale volumes */
-	left = mix_cvt[left];
-	right = mix_cvt[right];
-
-	devc->levels[dev] = retvol;
-
-	/*
-	 * Set the left channel
-	 */
-	ad1848_mixer_set_channel(devc, dev, left, LEFT_CHN);
-
-	/*
-	 * Set the right channel
-	 */
-	if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0)
-		goto out;
-	ad1848_mixer_set_channel(devc, dev, right, RIGHT_CHN);
-
- out:
-	return retvol;
-}
-
-static void ad1848_mixer_reset(ad1848_info * devc)
-{
-	int i;
-	char name[32];
-	unsigned long flags;
-
-	devc->mix_devices = &(ad1848_mix_devices[0]);
-
-	sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs);
-
-	for (i = 0; i < 32; i++)
-		devc->mixer_reroute[i] = i;
-
-	devc->supported_rec_devices = MODE1_REC_DEVICES;
-
-	switch (devc->model)
-	{
-		case MD_4231:
-		case MD_4231A:
-		case MD_1845:
-		case MD_1845_SSCAPE:
-			devc->supported_devices = MODE2_MIXER_DEVICES;
-			break;
-
-		case MD_C930:
-			devc->supported_devices = C930_MIXER_DEVICES;
-			devc->mix_devices = &(c930_mix_devices[0]);
-			break;
-
-		case MD_IWAVE:
-			devc->supported_devices = MODE3_MIXER_DEVICES;
-			devc->mix_devices = &(iwave_mix_devices[0]);
-			break;
-
-		case MD_42xB:
-		case MD_4239:
-			devc->mix_devices = &(cs42xb_mix_devices[0]);
-			devc->supported_devices = MODE3_MIXER_DEVICES;
-			break;
-		case MD_4232:
-		case MD_4235:
-		case MD_4236:
-			devc->supported_devices = MODE3_MIXER_DEVICES;
-			break;
-
-		case MD_1848:
-			if (soundpro) {
-				devc->supported_devices = SPRO_MIXER_DEVICES;
-				devc->supported_rec_devices = SPRO_REC_DEVICES;
-				devc->mix_devices = &(spro_mix_devices[0]);
-				break;
-			}
-
-		default:
-			devc->supported_devices = MODE1_MIXER_DEVICES;
-	}
-
-	devc->orig_devices = devc->supported_devices;
-	devc->orig_rec_devices = devc->supported_rec_devices;
-
-	devc->levels = load_mixer_volumes(name, default_mixer_levels, 1);
-
-	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-	{
-		if (devc->supported_devices & (1 << i))
-			ad1848_mixer_set(devc, i, devc->levels[i]);
-	}
-	
-	ad1848_set_recmask(devc, SOUND_MASK_MIC);
-	
-	devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	if (!soundpro) {
-		if (devc->mixer_output_port & AUDIO_SPEAKER)
-			ad_write(devc, 26, ad_read(devc, 26) & ~0x40);	/* Unmute mono out */
-		else
-			ad_write(devc, 26, ad_read(devc, 26) | 0x40);	/* Mute mono out */
-	} else {
-		/*
-		 * From the "wouldn't it be nice if the mixer API had (better)
-		 * support for custom stuff" category
-		 */
-		/* Enable surround mode and SB16 mixer */
-		ad_write(devc, 16, 0x60);
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	ad1848_info *devc = mixer_devs[dev]->devc;
-	int val;
-
-	if (cmd == SOUND_MIXER_PRIVATE1) 
-	{
-		if (get_user(val, (int __user *)arg))
-			return -EFAULT;
-
-		if (val != 0xffff) 
-		{
-			unsigned long flags;
-			val &= (AUDIO_SPEAKER | AUDIO_HEADPHONE | AUDIO_LINE_OUT);
-			devc->mixer_output_port = val;
-			val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT;	/* Always on */
-			devc->mixer_output_port = val;
-			spin_lock_irqsave(&devc->lock,flags);
-			if (val & AUDIO_SPEAKER)
-				ad_write(devc, 26, ad_read(devc, 26) & ~0x40);	/* Unmute mono out */
-			else
-				ad_write(devc, 26, ad_read(devc, 26) | 0x40);		/* Mute mono out */
-			spin_unlock_irqrestore(&devc->lock,flags);
-		}
-		val = devc->mixer_output_port;
-		return put_user(val, (int __user *)arg);
-	}
-	if (cmd == SOUND_MIXER_PRIVATE2)
-	{
-		if (get_user(val, (int __user *)arg))
-			return -EFAULT;
-		return(ad1848_control(AD1848_MIXER_REROUTE, val));
-	}
-	if (((cmd >> 8) & 0xff) == 'M') 
-	{
-		if (_SIOC_DIR(cmd) & _SIOC_WRITE)
-		{
-			switch (cmd & 0xff) 
-			{
-				case SOUND_MIXER_RECSRC:
-					if (get_user(val, (int __user *)arg))
-						return -EFAULT;
-					val = ad1848_set_recmask(devc, val);
-					break;
-				
-				default:
-					if (get_user(val, (int __user *)arg))
-						return -EFAULT;
-					val = ad1848_mixer_set(devc, cmd & 0xff, val);
-					break;
-			} 
-			return put_user(val, (int __user *)arg);
-		}
-		else
-		{
-			switch (cmd & 0xff) 
-			{
-				/*
-				 * Return parameters
-				 */
-			    
-				case SOUND_MIXER_RECSRC:
-					val = devc->recmask;
-					break;
-				
-				case SOUND_MIXER_DEVMASK:
-					val = devc->supported_devices;
-					break;
-				
-				case SOUND_MIXER_STEREODEVS:
-					val = devc->supported_devices;
-					if (devc->model != MD_C930)
-						val &= ~(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX);
-					break;
-				
-				case SOUND_MIXER_RECMASK:
-					val = devc->supported_rec_devices;
-					break;
-
-				case SOUND_MIXER_CAPS:
-					val=SOUND_CAP_EXCL_INPUT;
-					break;
-
-				default:
-					val = ad1848_mixer_get(devc, cmd & 0xff);
-					break;
-			}
-			return put_user(val, (int __user *)arg);
-		}
-	}
-	else
-		return -EINVAL;
-}
-
-static int ad1848_set_speed(int dev, int arg)
-{
-	ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	/*
-	 * The sampling speed is encoded in the least significant nibble of I8. The
-	 * LSB selects the clock source (0=24.576 MHz, 1=16.9344 MHz) and other
-	 * three bits select the divisor (indirectly):
-	 *
-	 * The available speeds are in the following table. Keep the speeds in
-	 * the increasing order.
-	 */
-	typedef struct
-	{
-		int             speed;
-		unsigned char   bits;
-	}
-	speed_struct;
-
-	static speed_struct speed_table[] =
-	{
-		{5510, (0 << 1) | 1},
-		{5510, (0 << 1) | 1},
-		{6620, (7 << 1) | 1},
-		{8000, (0 << 1) | 0},
-		{9600, (7 << 1) | 0},
-		{11025, (1 << 1) | 1},
-		{16000, (1 << 1) | 0},
-		{18900, (2 << 1) | 1},
-		{22050, (3 << 1) | 1},
-		{27420, (2 << 1) | 0},
-		{32000, (3 << 1) | 0},
-		{33075, (6 << 1) | 1},
-		{37800, (4 << 1) | 1},
-		{44100, (5 << 1) | 1},
-		{48000, (6 << 1) | 0}
-	};
-
-	int i, n, selected = -1;
-
-	n = sizeof(speed_table) / sizeof(speed_struct);
-
-	if (arg <= 0)
-		return portc->speed;
-
-	if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)	/* AD1845 has different timer than others */
-	{
-		if (arg < 4000)
-			arg = 4000;
-		if (arg > 50000)
-			arg = 50000;
-
-		portc->speed = arg;
-		portc->speed_bits = speed_table[3].bits;
-		return portc->speed;
-	}
-	if (arg < speed_table[0].speed)
-		selected = 0;
-	if (arg > speed_table[n - 1].speed)
-		selected = n - 1;
-
-	for (i = 1 /*really */ ; selected == -1 && i < n; i++)
-	{
-		if (speed_table[i].speed == arg)
-			selected = i;
-		else if (speed_table[i].speed > arg)
-		{
-			int diff1, diff2;
-
-			diff1 = arg - speed_table[i - 1].speed;
-			diff2 = speed_table[i].speed - arg;
-
-			if (diff1 < diff2)
-				selected = i - 1;
-			else
-				selected = i;
-		}
-	}
-	if (selected == -1)
-	{
-		printk(KERN_WARNING "ad1848: Can't find speed???\n");
-		selected = 3;
-	}
-	portc->speed = speed_table[selected].speed;
-	portc->speed_bits = speed_table[selected].bits;
-	return portc->speed;
-}
-
-static short ad1848_set_channels(int dev, short arg)
-{
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	if (arg != 1 && arg != 2)
-		return portc->channels;
-
-	portc->channels = arg;
-	return arg;
-}
-
-static unsigned int ad1848_set_bits(int dev, unsigned int arg)
-{
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	static struct format_tbl
-	{
-		  int             format;
-		  unsigned char   bits;
-	}
-	format2bits[] =
-	{
-		{
-			0, 0
-		}
-		,
-		{
-			AFMT_MU_LAW, 1
-		}
-		,
-		{
-			AFMT_A_LAW, 3
-		}
-		,
-		{
-			AFMT_IMA_ADPCM, 5
-		}
-		,
-		{
-			AFMT_U8, 0
-		}
-		,
-		{
-			AFMT_S16_LE, 2
-		}
-		,
-		{
-			AFMT_S16_BE, 6
-		}
-		,
-		{
-			AFMT_S8, 0
-		}
-		,
-		{
-			AFMT_U16_LE, 0
-		}
-		,
-		{
-			AFMT_U16_BE, 0
-		}
-	};
-	int i, n = sizeof(format2bits) / sizeof(struct format_tbl);
-
-	if (arg == 0)
-		return portc->audio_format;
-
-	if (!(arg & ad_format_mask[devc->model]))
-		arg = AFMT_U8;
-
-	portc->audio_format = arg;
-
-	for (i = 0; i < n; i++)
-		if (format2bits[i].format == arg)
-		{
-			if ((portc->format_bits = format2bits[i].bits) == 0)
-				return portc->audio_format = AFMT_U8;		/* Was not supported */
-
-			return arg;
-		}
-	/* Still hanging here. Something must be terribly wrong */
-	portc->format_bits = 0;
-	return portc->audio_format = AFMT_U8;
-}
-
-static struct audio_driver ad1848_audio_driver =
-{
-	.owner			= THIS_MODULE,
-	.open			= ad1848_open,
-	.close			= ad1848_close,
-	.output_block		= ad1848_output_block,
-	.start_input		= ad1848_start_input,
-	.prepare_for_input	= ad1848_prepare_for_input,
-	.prepare_for_output	= ad1848_prepare_for_output,
-	.halt_io		= ad1848_halt,
-	.halt_input		= ad1848_halt_input,
-	.halt_output		= ad1848_halt_output,
-	.trigger		= ad1848_trigger,
-	.set_speed		= ad1848_set_speed,
-	.set_bits		= ad1848_set_bits,
-	.set_channels		= ad1848_set_channels
-};
-
-static struct mixer_operations ad1848_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "SOUNDPORT",
-	.name	= "AD1848/CS4248/CS4231",
-	.ioctl	= ad1848_mixer_ioctl
-};
-
-static int ad1848_open(int dev, int mode)
-{
-	ad1848_info    *devc;
-	ad1848_port_info *portc;
-	unsigned long   flags;
-
-	if (dev < 0 || dev >= num_audiodevs)
-		return -ENXIO;
-
-	devc = (ad1848_info *) audio_devs[dev]->devc;
-	portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	/* here we don't have to protect against intr */
-	spin_lock(&devc->lock);
-	if (portc->open_mode || (devc->open_mode & mode))
-	{
-		spin_unlock(&devc->lock);
-		return -EBUSY;
-	}
-	devc->dual_dma = 0;
-
-	if (audio_devs[dev]->flags & DMA_DUPLEX)
-	{
-		devc->dual_dma = 1;
-	}
-	devc->intr_active = 0;
-	devc->audio_mode = 0;
-	devc->open_mode |= mode;
-	portc->open_mode = mode;
-	spin_unlock(&devc->lock);
-	ad1848_trigger(dev, 0);
-
-	if (mode & OPEN_READ)
-		devc->record_dev = dev;
-	if (mode & OPEN_WRITE)
-		devc->playback_dev = dev;
-/*
- * Mute output until the playback really starts. This decreases clicking (hope so).
- */
-	spin_lock_irqsave(&devc->lock,flags);
-	ad_mute(devc);
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	return 0;
-}
-
-static void ad1848_close(int dev)
-{
-	unsigned long   flags;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	devc->intr_active = 0;
-	ad1848_halt(dev);
-
-	spin_lock_irqsave(&devc->lock,flags);
-
-	devc->audio_mode = 0;
-	devc->open_mode &= ~portc->open_mode;
-	portc->open_mode = 0;
-
-	ad_unmute(devc);
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag)
-{
-	unsigned long   flags, cnt;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	cnt = count;
-
-	if (portc->audio_format == AFMT_IMA_ADPCM)
-	{
-		cnt /= 4;
-	}
-	else
-	{
-		if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))	/* 16 bit data */
-			cnt >>= 1;
-	}
-	if (portc->channels > 1)
-		cnt >>= 1;
-	cnt--;
-
-	if ((devc->audio_mode & PCM_ENABLE_OUTPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
-	    intrflag &&
-	    cnt == devc->xfer_count)
-	{
-		devc->audio_mode |= PCM_ENABLE_OUTPUT;
-		devc->intr_active = 1;
-		return;	/*
-			 * Auto DMA mode on. No need to react
-			 */
-	}
-	spin_lock_irqsave(&devc->lock,flags);
-
-	ad_write(devc, 15, (unsigned char) (cnt & 0xff));
-	ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
-
-	devc->xfer_count = cnt;
-	devc->audio_mode |= PCM_ENABLE_OUTPUT;
-	devc->intr_active = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag)
-{
-	unsigned long   flags, cnt;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	cnt = count;
-	if (portc->audio_format == AFMT_IMA_ADPCM)
-	{
-		cnt /= 4;
-	}
-	else
-	{
-		if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))	/* 16 bit data */
-			cnt >>= 1;
-	}
-	if (portc->channels > 1)
-		cnt >>= 1;
-	cnt--;
-
-	if ((devc->audio_mode & PCM_ENABLE_INPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
-		intrflag &&
-		cnt == devc->xfer_count)
-	{
-		devc->audio_mode |= PCM_ENABLE_INPUT;
-		devc->intr_active = 1;
-		return;	/*
-			 * Auto DMA mode on. No need to react
-			 */
-	}
-	spin_lock_irqsave(&devc->lock,flags);
-
-	if (devc->model == MD_1848)
-	{
-		  ad_write(devc, 15, (unsigned char) (cnt & 0xff));
-		  ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
-	}
-	else
-	{
-		  ad_write(devc, 31, (unsigned char) (cnt & 0xff));
-		  ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff));
-	}
-
-	ad_unmute(devc);
-
-	devc->xfer_count = cnt;
-	devc->audio_mode |= PCM_ENABLE_INPUT;
-	devc->intr_active = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static int ad1848_prepare_for_output(int dev, int bsize, int bcount)
-{
-	int             timeout;
-	unsigned char   fs, old_fs, tmp = 0;
-	unsigned long   flags;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	ad_mute(devc);
-
-	spin_lock_irqsave(&devc->lock,flags);
-	fs = portc->speed_bits | (portc->format_bits << 5);
-
-	if (portc->channels > 1)
-		fs |= 0x10;
-
-	ad_enter_MCE(devc);	/* Enables changes to the format select reg */
-
-	if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* Use alternate speed select registers */
-	{
-		fs &= 0xf0;	/* Mask off the rate select bits */
-
-		ad_write(devc, 22, (portc->speed >> 8) & 0xff);	/* Speed MSB */
-		ad_write(devc, 23, portc->speed & 0xff);	/* Speed LSB */
-	}
-	old_fs = ad_read(devc, 8);
-
-	if (devc->model == MD_4232 || devc->model >= MD_4236)
-	{
-		tmp = ad_read(devc, 16);
-		ad_write(devc, 16, tmp | 0x30);
-	}
-	if (devc->model == MD_IWAVE)
-		ad_write(devc, 17, 0xc2);	/* Disable variable frequency select */
-
-	ad_write(devc, 8, fs);
-
-	/*
-	 * Write to I8 starts resynchronization. Wait until it completes.
-	 */
-
-	timeout = 0;
-	while (timeout < 100 && inb(devc->base) != 0x80)
-		timeout++;
-	timeout = 0;
-	while (timeout < 10000 && inb(devc->base) == 0x80)
-		timeout++;
-
-	if (devc->model >= MD_4232)
-		ad_write(devc, 16, tmp & ~0x30);
-
-	ad_leave_MCE(devc);	/*
-				 * Starts the calibration process.
-				 */
-	spin_unlock_irqrestore(&devc->lock,flags);
-	devc->xfer_count = 0;
-
-#ifndef EXCLUDE_TIMERS
-	if (dev == timer_installed && devc->timer_running)
-		if ((fs & 0x01) != (old_fs & 0x01))
-		{
-			ad1848_tmr_reprogram(dev);
-		}
-#endif
-	ad1848_halt_output(dev);
-	return 0;
-}
-
-static int ad1848_prepare_for_input(int dev, int bsize, int bcount)
-{
-	int timeout;
-	unsigned char fs, old_fs, tmp = 0;
-	unsigned long flags;
-	ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	if (devc->audio_mode)
-		return 0;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	fs = portc->speed_bits | (portc->format_bits << 5);
-
-	if (portc->channels > 1)
-		fs |= 0x10;
-
-	ad_enter_MCE(devc);	/* Enables changes to the format select reg */
-
-	if ((devc->model == MD_1845) || (devc->model == MD_1845_SSCAPE))	/* Use alternate speed select registers */
-	{
-		fs &= 0xf0;	/* Mask off the rate select bits */
-
-		ad_write(devc, 22, (portc->speed >> 8) & 0xff);	/* Speed MSB */
-		ad_write(devc, 23, portc->speed & 0xff);	/* Speed LSB */
-	}
-	if (devc->model == MD_4232)
-	{
-		tmp = ad_read(devc, 16);
-		ad_write(devc, 16, tmp | 0x30);
-	}
-	if (devc->model == MD_IWAVE)
-		ad_write(devc, 17, 0xc2);	/* Disable variable frequency select */
-
-	/*
-	 * If mode >= 2 (CS4231), set I28. It's the capture format register.
-	 */
-	
-	if (devc->model != MD_1848)
-	{
-		old_fs = ad_read(devc, 28);
-		ad_write(devc, 28, fs);
-
-		/*
-		 * Write to I28 starts resynchronization. Wait until it completes.
-		 */
-		
-		timeout = 0;
-		while (timeout < 100 && inb(devc->base) != 0x80)
-			timeout++;
-
-		timeout = 0;
-		while (timeout < 10000 && inb(devc->base) == 0x80)
-			timeout++;
-
-		if (devc->model != MD_1848 && devc->model != MD_1845 && devc->model != MD_1845_SSCAPE)
-		{
-			/*
-			 * CS4231 compatible devices don't have separate sampling rate selection
-			 * register for recording an playback. The I8 register is shared so we have to
-			 * set the speed encoding bits of it too.
-			 */
-			unsigned char   tmp = portc->speed_bits | (ad_read(devc, 8) & 0xf0);
-
-			ad_write(devc, 8, tmp);
-			/*
-			 * Write to I8 starts resynchronization. Wait until it completes.
-			 */
-			timeout = 0;
-			while (timeout < 100 && inb(devc->base) != 0x80)
-				timeout++;
-
-			timeout = 0;
-			while (timeout < 10000 && inb(devc->base) == 0x80)
-				timeout++;
-		}
-	}
-	else
-	{			/* For AD1848 set I8. */
-
-		old_fs = ad_read(devc, 8);
-		ad_write(devc, 8, fs);
-		/*
-		 * Write to I8 starts resynchronization. Wait until it completes.
-		 */
-		timeout = 0;
-		while (timeout < 100 && inb(devc->base) != 0x80)
-			timeout++;
-		timeout = 0;
-		while (timeout < 10000 && inb(devc->base) == 0x80)
-			timeout++;
-	}
-
-	if (devc->model == MD_4232)
-		ad_write(devc, 16, tmp & ~0x30);
-
-	ad_leave_MCE(devc);	/*
-				 * Starts the calibration process.
-				 */
-	spin_unlock_irqrestore(&devc->lock,flags);
-	devc->xfer_count = 0;
-
-#ifndef EXCLUDE_TIMERS
-	if (dev == timer_installed && devc->timer_running)
-	{
-		if ((fs & 0x01) != (old_fs & 0x01))
-		{
-			ad1848_tmr_reprogram(dev);
-		}
-	}
-#endif
-	ad1848_halt_input(dev);
-	return 0;
-}
-
-static void ad1848_halt(int dev)
-{
-	ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-
-	unsigned char   bits = ad_read(devc, 9);
-
-	if (bits & 0x01 && (portc->open_mode & OPEN_WRITE))
-		ad1848_halt_output(dev);
-
-	if (bits & 0x02 && (portc->open_mode & OPEN_READ))
-		ad1848_halt_input(dev);
-	devc->audio_mode = 0;
-}
-
-static void ad1848_halt_input(int dev)
-{
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	unsigned long   flags;
-
-	if (!(ad_read(devc, 9) & 0x02))
-		return;		/* Capture not enabled */
-
-	spin_lock_irqsave(&devc->lock,flags);
-
-	ad_mute(devc);
-
-	{
-		int             tmout;
-		
-		if(!isa_dma_bridge_buggy)
-		        disable_dma(audio_devs[dev]->dmap_in->dma);
-
-		for (tmout = 0; tmout < 100000; tmout++)
-			if (ad_read(devc, 11) & 0x10)
-				break;
-		ad_write(devc, 9, ad_read(devc, 9) & ~0x02);	/* Stop capture */
-
-		if(!isa_dma_bridge_buggy)
-		        enable_dma(audio_devs[dev]->dmap_in->dma);
-		devc->audio_mode &= ~PCM_ENABLE_INPUT;
-	}
-
-	outb(0, io_Status(devc));	/* Clear interrupt status */
-	outb(0, io_Status(devc));	/* Clear interrupt status */
-
-	devc->audio_mode &= ~PCM_ENABLE_INPUT;
-
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_halt_output(int dev)
-{
-	ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
-	unsigned long flags;
-
-	if (!(ad_read(devc, 9) & 0x01))
-		return;		/* Playback not enabled */
-
-	spin_lock_irqsave(&devc->lock,flags);
-
-	ad_mute(devc);
-	{
-		int             tmout;
-
-		if(!isa_dma_bridge_buggy)
-		        disable_dma(audio_devs[dev]->dmap_out->dma);
-
-		for (tmout = 0; tmout < 100000; tmout++)
-			if (ad_read(devc, 11) & 0x10)
-				break;
-		ad_write(devc, 9, ad_read(devc, 9) & ~0x01);	/* Stop playback */
-
-		if(!isa_dma_bridge_buggy)
-		       enable_dma(audio_devs[dev]->dmap_out->dma);
-
-		devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
-	}
-
-	outb((0), io_Status(devc));	/* Clear interrupt status */
-	outb((0), io_Status(devc));	/* Clear interrupt status */
-
-	devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
-
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_trigger(int dev, int state)
-{
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
-	unsigned long   flags;
-	unsigned char   tmp, old;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	state &= devc->audio_mode;
-
-	tmp = old = ad_read(devc, 9);
-
-	if (portc->open_mode & OPEN_READ)
-	{
-		  if (state & PCM_ENABLE_INPUT)
-			  tmp |= 0x02;
-		  else
-			  tmp &= ~0x02;
-	}
-	if (portc->open_mode & OPEN_WRITE)
-	{
-		if (state & PCM_ENABLE_OUTPUT)
-			tmp |= 0x01;
-		else
-			tmp &= ~0x01;
-	}
-	/* ad_mute(devc); */
-	if (tmp != old)
-	{
-		  ad_write(devc, 9, tmp);
-		  ad_unmute(devc);
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_init_hw(ad1848_info * devc)
-{
-	int i;
-	int *init_values;
-
-	/*
-	 * Initial values for the indirect registers of CS4248/AD1848.
-	 */
-	static int      init_values_a[] =
-	{
-		0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
-		0x00, 0x0c, 0x02, 0x00, 0x8a, 0x01, 0x00, 0x00,
-
-	/* Positions 16 to 31 just for CS4231/2 and ad1845 */
-		0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-	};
-
-	static int      init_values_b[] =
-	{
-		/* 
-		   Values for the newer chips
-		   Some of the register initialization values were changed. In
-		   order to get rid of the click that preceded PCM playback,
-		   calibration was disabled on the 10th byte. On that same byte,
-		   dual DMA was enabled; on the 11th byte, ADC dithering was
-		   enabled, since that is theoretically desirable; on the 13th
-		   byte, Mode 3 was selected, to enable access to extended
-		   registers.
-		 */
-		0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
-		0x00, 0x00, 0x06, 0x00, 0xe0, 0x01, 0x00, 0x00,
- 		0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
- 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-	};
-
-	/*
-	 *	Select initialisation data
-	 */
-	 
-	init_values = init_values_a;
-	if(devc->model >= MD_4236)
-		init_values = init_values_b;
-
-	for (i = 0; i < 16; i++)
-		ad_write(devc, i, init_values[i]);
-
-
-	ad_mute(devc);		/* Initialize some variables */
-	ad_unmute(devc);	/* Leave it unmuted now */
-
-	if (devc->model > MD_1848)
-	{
-		if (devc->model == MD_1845_SSCAPE)
-			ad_write(devc, 12, ad_read(devc, 12) | 0x50);
-		else 
-			ad_write(devc, 12, ad_read(devc, 12) | 0x40);		/* Mode2 = enabled */
-
-		if (devc->model == MD_IWAVE)
-			ad_write(devc, 12, 0x6c);	/* Select codec mode 3 */
-
-		if (devc->model != MD_1845_SSCAPE)
-			for (i = 16; i < 32; i++)
-				ad_write(devc, i, init_values[i]);
-
-		if (devc->model == MD_IWAVE)
-			ad_write(devc, 16, 0x30);	/* Playback and capture counters enabled */
-	}
-	if (devc->model > MD_1848)
-	{
-		if (devc->audio_flags & DMA_DUPLEX)
-			ad_write(devc, 9, ad_read(devc, 9) & ~0x04);	/* Dual DMA mode */
-		else
-			ad_write(devc, 9, ad_read(devc, 9) | 0x04);	/* Single DMA mode */
-
-		if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
-			ad_write(devc, 27, ad_read(devc, 27) | 0x08);		/* Alternate freq select enabled */
-
-		if (devc->model == MD_IWAVE)
-		{		/* Some magic Interwave specific initialization */
-			ad_write(devc, 12, 0x6c);	/* Select codec mode 3 */
-			ad_write(devc, 16, 0x30);	/* Playback and capture counters enabled */
-			ad_write(devc, 17, 0xc2);	/* Alternate feature enable */
-		}
-	}
-	else
-	{
-		  devc->audio_flags &= ~DMA_DUPLEX;
-		  ad_write(devc, 9, ad_read(devc, 9) | 0x04);	/* Single DMA mode */
-		  if (soundpro)
-			  ad_write(devc, 12, ad_read(devc, 12) | 0x40);	/* Mode2 = enabled */
-	}
-
-	outb((0), io_Status(devc));	/* Clear pending interrupts */
-
-	/*
-	 * Toggle the MCE bit. It completes the initialization phase.
-	 */
-
-	ad_enter_MCE(devc);	/* In case the bit was off */
-	ad_leave_MCE(devc);
-
-	ad1848_mixer_reset(devc);
-}
-
-int ad1848_detect(struct resource *ports, int *ad_flags, int *osp)
-{
-	unsigned char tmp;
-	ad1848_info *devc = &adev_info[nr_ad1848_devs];
-	unsigned char tmp1 = 0xff, tmp2 = 0xff;
-	int optiC930 = 0;	/* OPTi 82C930 flag */
-	int interwave = 0;
-	int ad1847_flag = 0;
-	int cs4248_flag = 0;
-	int sscape_flag = 0;
-	int io_base = ports->start;
-
-	int i;
-
-	DDB(printk("ad1848_detect(%x)\n", io_base));
-
-	if (ad_flags)
-	{
-		if (*ad_flags == 0x12345678)
-		{
-			interwave = 1;
-			*ad_flags = 0;
-		}
-		
-		if (*ad_flags == 0x87654321)
-		{
-			sscape_flag = 1;
-			*ad_flags = 0;
-		}
-		
-		if (*ad_flags == 0x12345677)
-		{
-		    cs4248_flag = 1;
-		    *ad_flags = 0;
-		}
-	}
-	if (nr_ad1848_devs >= MAX_AUDIO_DEV)
-	{
-		printk(KERN_ERR "ad1848 - Too many audio devices\n");
-		return 0;
-	}
-	spin_lock_init(&devc->lock);
-	devc->base = io_base;
-	devc->irq_ok = 0;
-	devc->timer_running = 0;
-	devc->MCE_bit = 0x40;
-	devc->irq = 0;
-	devc->open_mode = 0;
-	devc->chip_name = devc->name = "AD1848";
-	devc->model = MD_1848;	/* AD1848 or CS4248 */
-	devc->levels = NULL;
-	devc->debug_flag = 0;
-
-	/*
-	 * Check that the I/O address is in use.
-	 *
-	 * The bit 0x80 of the base I/O port is known to be 0 after the
-	 * chip has performed its power on initialization. Just assume
-	 * this has happened before the OS is starting.
-	 *
-	 * If the I/O address is unused, it typically returns 0xff.
-	 */
-
-	if (inb(devc->base) == 0xff)
-	{
-		DDB(printk("ad1848_detect: The base I/O address appears to be dead\n"));
-	}
-
-	/*
-	 * Wait for the device to stop initialization
-	 */
-	
-	DDB(printk("ad1848_detect() - step 0\n"));
-
-	for (i = 0; i < 10000000; i++)
-	{
-		unsigned char   x = inb(devc->base);
-
-		if (x == 0xff || !(x & 0x80))
-			break;
-	}
-
-	DDB(printk("ad1848_detect() - step A\n"));
-
-	if (inb(devc->base) == 0x80)	/* Not ready. Let's wait */
-		ad_leave_MCE(devc);
-
-	if ((inb(devc->base) & 0x80) != 0x00)	/* Not a AD1848 */
-	{
-		DDB(printk("ad1848 detect error - step A (%02x)\n", (int) inb(devc->base)));
-		return 0;
-	}
-	
-	/*
-	 * Test if it's possible to change contents of the indirect registers.
-	 * Registers 0 and 1 are ADC volume registers. The bit 0x10 is read only
-	 * so try to avoid using it.
-	 */
-
-	DDB(printk("ad1848_detect() - step B\n"));
-	ad_write(devc, 0, 0xaa);
-	ad_write(devc, 1, 0x45);	/* 0x55 with bit 0x10 clear */
-
-	if ((tmp1 = ad_read(devc, 0)) != 0xaa || (tmp2 = ad_read(devc, 1)) != 0x45)
-	{
-		if (tmp2 == 0x65)	/* AD1847 has couple of bits hardcoded to 1 */
-			ad1847_flag = 1;
-		else
-		{
-			DDB(printk("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2));
-			return 0;
-		}
-	}
-	DDB(printk("ad1848_detect() - step C\n"));
-	ad_write(devc, 0, 0x45);
-	ad_write(devc, 1, 0xaa);
-
-	if ((tmp1 = ad_read(devc, 0)) != 0x45 || (tmp2 = ad_read(devc, 1)) != 0xaa)
-	{
-		if (tmp2 == 0x8a)	/* AD1847 has few bits hardcoded to 1 */
-			ad1847_flag = 1;
-		else
-		{
-			DDB(printk("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2));
-			return 0;
-		}
-	}
-
-	/*
-	 * The indirect register I12 has some read only bits. Let's
-	 * try to change them.
-	 */
-
-	DDB(printk("ad1848_detect() - step D\n"));
-	tmp = ad_read(devc, 12);
-	ad_write(devc, 12, (~tmp) & 0x0f);
-
-	if ((tmp & 0x0f) != ((tmp1 = ad_read(devc, 12)) & 0x0f))
-	{
-		DDB(printk("ad1848 detect error - step D (%x)\n", tmp1));
-		return 0;
-	}
-	
-	/*
-	 * NOTE! Last 4 bits of the reg I12 tell the chip revision.
-	 *   0x01=RevB and 0x0A=RevC.
-	 */
-
-	/*
-	 * The original AD1848/CS4248 has just 15 indirect registers. This means
-	 * that I0 and I16 should return the same value (etc.).
-	 * However this doesn't work with CS4248. Actually it seems to be impossible
-	 * to detect if the chip is a CS4231 or CS4248.
-	 * Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test fails
-	 * with CS4231.
-	 */
-
-	/*
-	 * OPTi 82C930 has mode2 control bit in another place. This test will fail
-	 * with it. Accept this situation as a possible indication of this chip.
-	 */
-
-	DDB(printk("ad1848_detect() - step F\n"));
-	ad_write(devc, 12, 0);	/* Mode2=disabled */
-
-	for (i = 0; i < 16; i++)
-	{
-		if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16)))
-		{
-			DDB(printk("ad1848 detect step F(%d/%x/%x) - OPTi chip???\n", i, tmp1, tmp2));
-			if (!ad1847_flag)
-				optiC930 = 1;
-			break;
-		}
-	}
-
-	/*
-	 * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit (0x40).
-	 * The bit 0x80 is always 1 in CS4248 and CS4231.
-	 */
-
-	DDB(printk("ad1848_detect() - step G\n"));
-
-	if (ad_flags && *ad_flags == 400)
-		*ad_flags = 0;
-	else
-		ad_write(devc, 12, 0x40);	/* Set mode2, clear 0x80 */
-
-
-	if (ad_flags)
-		*ad_flags = 0;
-
-	tmp1 = ad_read(devc, 12);
-	if (tmp1 & 0x80)
-	{
-		if (ad_flags)
-			*ad_flags |= AD_F_CS4248;
-
-		devc->chip_name = "CS4248";	/* Our best knowledge just now */
-	}
-	if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40))
-	{
-		/*
-		 *      CS4231 detected - is it?
-		 *
-		 *      Verify that setting I0 doesn't change I16.
-		 */
-		
-		DDB(printk("ad1848_detect() - step H\n"));
-		ad_write(devc, 16, 0);	/* Set I16 to known value */
-
-		ad_write(devc, 0, 0x45);
-		if ((tmp1 = ad_read(devc, 16)) != 0x45)	/* No change -> CS4231? */
-		{
-			ad_write(devc, 0, 0xaa);
-			if ((tmp1 = ad_read(devc, 16)) == 0xaa)	/* Rotten bits? */
-			{
-				DDB(printk("ad1848 detect error - step H(%x)\n", tmp1));
-				return 0;
-			}
-			
-			/*
-			 * Verify that some bits of I25 are read only.
-			 */
-
-			DDB(printk("ad1848_detect() - step I\n"));
-			tmp1 = ad_read(devc, 25);	/* Original bits */
-			ad_write(devc, 25, ~tmp1);	/* Invert all bits */
-			if ((ad_read(devc, 25) & 0xe7) == (tmp1 & 0xe7))
-			{
-				int id;
-
-				/*
-				 *      It's at least CS4231
-				 */
-
-				devc->chip_name = "CS4231";
-				devc->model = MD_4231;
-				
-				/*
-				 * It could be an AD1845 or CS4231A as well.
-				 * CS4231 and AD1845 report the same revision info in I25
-				 * while the CS4231A reports different.
-				 */
-
-				id = ad_read(devc, 25);
-				if ((id & 0xe7) == 0x80)	/* Device busy??? */
-					id = ad_read(devc, 25);
-				if ((id & 0xe7) == 0x80)	/* Device still busy??? */
-					id = ad_read(devc, 25);
-				DDB(printk("ad1848_detect() - step J (%02x/%02x)\n", id, ad_read(devc, 25)));
-
-                                if ((id & 0xe7) == 0x80) {
-					/* 
-					 * It must be a CS4231 or AD1845. The register I23 of
-					 * CS4231 is undefined and it appears to be read only.
-					 * AD1845 uses I23 for setting sample rate. Assume
-					 * the chip is AD1845 if I23 is changeable.
-					 */
-
-					unsigned char   tmp = ad_read(devc, 23);
-					ad_write(devc, 23, ~tmp);
-
-					if (interwave)
-					{
-						devc->model = MD_IWAVE;
-						devc->chip_name = "IWave";
-					}
-					else if (ad_read(devc, 23) != tmp)	/* AD1845 ? */
-					{
-						devc->chip_name = "AD1845";
-						devc->model = MD_1845;
-					}
-					else if (cs4248_flag)
-					{
-						if (ad_flags)
-							  *ad_flags |= AD_F_CS4248;
-						devc->chip_name = "CS4248";
-						devc->model = MD_1848;
-						ad_write(devc, 12, ad_read(devc, 12) & ~0x40);	/* Mode2 off */
-					}
-					ad_write(devc, 23, tmp);	/* Restore */
-				}
-				else
-				{
-					switch (id & 0x1f) {
-					case 3: /* CS4236/CS4235/CS42xB/CS4239 */
-						{
-							int xid;
-							ad_write(devc, 12, ad_read(devc, 12) | 0x60); /* switch to mode 3 */
-							ad_write(devc, 23, 0x9c); /* select extended register 25 */
-							xid = inb(io_Indexed_Data(devc));
-							ad_write(devc, 12, ad_read(devc, 12) & ~0x60); /* back to mode 0 */
-							switch (xid & 0x1f)
-							{
-								case 0x00:
-									devc->chip_name = "CS4237B(B)";
-									devc->model = MD_42xB;
-									break;
-								case 0x08:
-									/* Seems to be a 4238 ?? */
-									devc->chip_name = "CS4238";
-									devc->model = MD_42xB;
-									break;
-								case 0x09:
-									devc->chip_name = "CS4238B";
-									devc->model = MD_42xB;
-									break;
-								case 0x0b:
-									devc->chip_name = "CS4236B";
-									devc->model = MD_4236;
-									break;
-								case 0x10:
-									devc->chip_name = "CS4237B";
-									devc->model = MD_42xB;
-									break;
-								case 0x1d:
-									devc->chip_name = "CS4235";
-									devc->model = MD_4235;
-									break;
-								case 0x1e:
-									devc->chip_name = "CS4239";
-									devc->model = MD_4239;
-									break;
-								default:
-									printk("Chip ident is %X.\n", xid&0x1F);
-									devc->chip_name = "CS42xx";
-									devc->model = MD_4232;
-									break;
-							}
-						}
-						break;
-
-					case 2: /* CS4232/CS4232A */
-						devc->chip_name = "CS4232";
-						devc->model = MD_4232;
-						break;
-				
-					case 0:
-						if ((id & 0xe0) == 0xa0)
-						{
-							devc->chip_name = "CS4231A";
-							devc->model = MD_4231A;
-						}
-						else
-						{
-							devc->chip_name = "CS4321";
-							devc->model = MD_4231;
-						}
-						break;
-
-					default: /* maybe */
-						DDB(printk("ad1848: I25 = %02x/%02x\n", ad_read(devc, 25), ad_read(devc, 25) & 0xe7));
-                                                if (optiC930)
-                                                {
-                                                        devc->chip_name = "82C930";
-                                                        devc->model = MD_C930;
-                                                }
-						else
-						{
-							devc->chip_name = "CS4231";
-							devc->model = MD_4231;
-						}
-					}
-				}
-			}
-			ad_write(devc, 25, tmp1);	/* Restore bits */
-
-			DDB(printk("ad1848_detect() - step K\n"));
-		}
-	} else if (tmp1 == 0x0a) {
-		/*
-		 * Is it perhaps a SoundPro CMI8330?
-		 * If so, then we should be able to change indirect registers
-		 * greater than I15 after activating MODE2, even though reading
-		 * back I12 does not show it.
-		 */
-
-		/*
-		 * Let's try comparing register values
-		 */
-		for (i = 0; i < 16; i++) {
-			if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) {
-				DDB(printk("ad1848 detect step H(%d/%x/%x) - SoundPro chip?\n", i, tmp1, tmp2));
-				soundpro = 1;
-				devc->chip_name = "SoundPro CMI 8330";
-				break;
-			}
-		}
-	}
-
-	DDB(printk("ad1848_detect() - step L\n"));
-	if (ad_flags)
-	{
-		  if (devc->model != MD_1848)
-			  *ad_flags |= AD_F_CS4231;
-	}
-	DDB(printk("ad1848_detect() - Detected OK\n"));
-
-	if (devc->model == MD_1848 && ad1847_flag)
-		devc->chip_name = "AD1847";
-
-
-	if (sscape_flag == 1)
-		devc->model = MD_1845_SSCAPE;
-
-	return 1;
-}
-
-int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback,
-		int dma_capture, int share_dma, int *osp, struct module *owner)
-{
-	/*
-	 * NOTE! If irq < 0, there is another driver which has allocated the IRQ
-	 *   so that this driver doesn't need to allocate/deallocate it.
-	 *   The actually used IRQ is ABS(irq).
-	 */
-
-	int my_dev;
-	char dev_name[100];
-	int e;
-
-	ad1848_info  *devc = &adev_info[nr_ad1848_devs];
-
-	ad1848_port_info *portc = NULL;
-
-	devc->irq = (irq > 0) ? irq : 0;
-	devc->open_mode = 0;
-	devc->timer_ticks = 0;
-	devc->dma1 = dma_playback;
-	devc->dma2 = dma_capture;
-	devc->subtype = cfg.card_subtype;
-	devc->audio_flags = DMA_AUTOMODE;
-	devc->playback_dev = devc->record_dev = 0;
-	if (name != NULL)
-		devc->name = name;
-
-	if (name != NULL && name[0] != 0)
-		sprintf(dev_name,
-			"%s (%s)", name, devc->chip_name);
-	else
-		sprintf(dev_name,
-			"Generic audio codec (%s)", devc->chip_name);
-
-	rename_region(ports, devc->name);
-
-	conf_printf2(dev_name, devc->base, devc->irq, dma_playback, dma_capture);
-
-	if (devc->model == MD_1848 || devc->model == MD_C930)
-		devc->audio_flags |= DMA_HARDSTOP;
-
-	if (devc->model > MD_1848)
-	{
-		if (devc->dma1 == devc->dma2 || devc->dma2 == -1 || devc->dma1 == -1)
-			devc->audio_flags &= ~DMA_DUPLEX;
-		else
-			devc->audio_flags |= DMA_DUPLEX;
-	}
-
-	portc = kmalloc(sizeof(ad1848_port_info), GFP_KERNEL);
-	if(portc==NULL) {
-		release_region(devc->base, 4);
-		return -1;
-	}
-
-	if ((my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
-					     dev_name,
-					     &ad1848_audio_driver,
-					     sizeof(struct audio_driver),
-					     devc->audio_flags,
-					     ad_format_mask[devc->model],
-					     devc,
-					     dma_playback,
-					     dma_capture)) < 0)
-	{
-		release_region(devc->base, 4);
-		kfree(portc);
-		return -1;
-	}
-	
-	audio_devs[my_dev]->portc = portc;
-	audio_devs[my_dev]->mixer_dev = -1;
-	if (owner)
-		audio_devs[my_dev]->d->owner = owner;
-	memset((char *) portc, 0, sizeof(*portc));
-
-	nr_ad1848_devs++;
-
-	ad1848_init_hw(devc);
-
-	if (irq > 0)
-	{
-		devc->dev_no = my_dev;
-		if (request_irq(devc->irq, adintr, 0, devc->name,
-				(void *)(long)my_dev) < 0)
-		{
-			printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
-			/* Don't free it either then.. */
-			devc->irq = 0;
-		}
-		if (capabilities[devc->model].flags & CAP_F_TIMER)
-		{
-#ifndef CONFIG_SMP
-			int x;
-			unsigned char tmp = ad_read(devc, 16);
-#endif			
-
-			devc->timer_ticks = 0;
-
-			ad_write(devc, 21, 0x00);	/* Timer MSB */
-			ad_write(devc, 20, 0x10);	/* Timer LSB */
-#ifndef CONFIG_SMP
-			ad_write(devc, 16, tmp | 0x40);	/* Enable timer */
-			for (x = 0; x < 100000 && devc->timer_ticks == 0; x++);
-			ad_write(devc, 16, tmp & ~0x40);	/* Disable timer */
-
-			if (devc->timer_ticks == 0)
-				printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq);
-			else
-			{
-				DDB(printk("Interrupt test OK\n"));
-				devc->irq_ok = 1;
-			}
-#else
-			devc->irq_ok = 1;
-#endif			
-		}
-		else
-			devc->irq_ok = 1;	/* Couldn't test. assume it's OK */
-	} else if (irq < 0)
-		devc->dev_no = my_dev;
-
-#ifndef EXCLUDE_TIMERS
-	if ((capabilities[devc->model].flags & CAP_F_TIMER) &&
-	    devc->irq_ok)
-		ad1848_tmr_install(my_dev);
-#endif
-
-	if (!share_dma)
-	{
-		if (sound_alloc_dma(dma_playback, devc->name))
-			printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback);
-
-		if (dma_capture != dma_playback)
-			if (sound_alloc_dma(dma_capture, devc->name))
-				printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_capture);
-	}
-
-	if ((e = sound_install_mixer(MIXER_DRIVER_VERSION,
-				     dev_name,
-				     &ad1848_mixer_operations,
-				     sizeof(struct mixer_operations),
-				     devc)) >= 0)
-	{
-		audio_devs[my_dev]->mixer_dev = e;
-		if (owner)
-			mixer_devs[e]->owner = owner;
-	}
-	return my_dev;
-}
-
-int ad1848_control(int cmd, int arg)
-{
-	ad1848_info *devc;
-	unsigned long flags;
-
-	if (nr_ad1848_devs < 1)
-		return -ENODEV;
-
-	devc = &adev_info[nr_ad1848_devs - 1];
-
-	switch (cmd)
-	{
-		case AD1848_SET_XTAL:	/* Change clock frequency of AD1845 (only ) */
-			if (devc->model != MD_1845 && devc->model != MD_1845_SSCAPE)
-				return -EINVAL;
-			spin_lock_irqsave(&devc->lock,flags);
-			ad_enter_MCE(devc);
-			ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5));
-			ad_leave_MCE(devc);
-			spin_unlock_irqrestore(&devc->lock,flags);
-			break;
-
-		case AD1848_MIXER_REROUTE:
-		{
-			int o = (arg >> 8) & 0xff;
-			int n = arg & 0xff;
-
-			if (o < 0 || o >= SOUND_MIXER_NRDEVICES)
-				return -EINVAL;
-
-			if (!(devc->supported_devices & (1 << o)) &&
-			    !(devc->supported_rec_devices & (1 << o)))
-				return -EINVAL;
-
-			if (n == SOUND_MIXER_NONE)
-			{	/* Just hide this control */
-				ad1848_mixer_set(devc, o, 0);	/* Shut up it */
-				devc->supported_devices &= ~(1 << o);
-				devc->supported_rec_devices &= ~(1 << o);
-				break;
-			}
-
-			/* Make the mixer control identified by o to appear as n */
-			if (n < 0 || n >= SOUND_MIXER_NRDEVICES)
-				return -EINVAL;
-
-			devc->mixer_reroute[n] = o;	/* Rename the control */
-			if (devc->supported_devices & (1 << o))
-				devc->supported_devices |= (1 << n);
-			if (devc->supported_rec_devices & (1 << o))
-				devc->supported_rec_devices |= (1 << n);
-
-			devc->supported_devices &= ~(1 << o);
-			devc->supported_rec_devices &= ~(1 << o);
-		}
-		break;
-	}
-	return 0;
-}
-
-void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int share_dma)
-{
-	int i, mixer, dev = 0;
-	ad1848_info *devc = NULL;
-
-	for (i = 0; devc == NULL && i < nr_ad1848_devs; i++)
-	{
-		if (adev_info[i].base == io_base)
-		{
-			devc = &adev_info[i];
-			dev = devc->dev_no;
-		}
-	}
-		
-	if (devc != NULL)
-	{
-		kfree(audio_devs[dev]->portc);
-		release_region(devc->base, 4);
-
-		if (!share_dma)
-		{
-			if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
-				free_irq(devc->irq, (void *)(long)devc->dev_no);
-
-			sound_free_dma(dma_playback);
-
-			if (dma_playback != dma_capture)
-				sound_free_dma(dma_capture);
-
-		}
-		mixer = audio_devs[devc->dev_no]->mixer_dev;
-		if(mixer>=0)
-			sound_unload_mixerdev(mixer);
-
-		nr_ad1848_devs--;
-		for ( ; i < nr_ad1848_devs ; i++)
-			adev_info[i] = adev_info[i+1];
-	}
-	else
-		printk(KERN_ERR "ad1848: Can't find device to be unloaded. Base=%x\n", io_base);
-}
-
-static irqreturn_t adintr(int irq, void *dev_id)
-{
-	unsigned char status;
-	ad1848_info *devc;
-	int dev;
-	int alt_stat = 0xff;
-	unsigned char c930_stat = 0;
-	int cnt = 0;
-
-	dev = (long)dev_id;
-	devc = (ad1848_info *) audio_devs[dev]->devc;
-
-interrupt_again:		/* Jump back here if int status doesn't reset */
-
-	status = inb(io_Status(devc));
-
-	if (status == 0x80)
-		printk(KERN_DEBUG "adintr: Why?\n");
-	if (devc->model == MD_1848)
-		outb((0), io_Status(devc));	/* Clear interrupt status */
-
-	if (status & 0x01)
-	{
-		if (devc->model == MD_C930)
-		{		/* 82C930 has interrupt status register in MAD16 register MC11 */
-
-			spin_lock(&devc->lock);
-
-			/* 0xe0e is C930 address port
-			 * 0xe0f is C930 data port
-			 */
-			outb(11, 0xe0e);
-			c930_stat = inb(0xe0f);
-			outb((~c930_stat), 0xe0f);
-
-			spin_unlock(&devc->lock);
-
-			alt_stat = (c930_stat << 2) & 0x30;
-		}
-		else if (devc->model != MD_1848)
-		{
-			spin_lock(&devc->lock);
-			alt_stat = ad_read(devc, 24);
-			ad_write(devc, 24, ad_read(devc, 24) & ~alt_stat);	/* Selective ack */
-			spin_unlock(&devc->lock);
-		}
-
-		if ((devc->open_mode & OPEN_READ) && (devc->audio_mode & PCM_ENABLE_INPUT) && (alt_stat & 0x20))
-		{
-			DMAbuf_inputintr(devc->record_dev);
-		}
-		if ((devc->open_mode & OPEN_WRITE) && (devc->audio_mode & PCM_ENABLE_OUTPUT) &&
-		      (alt_stat & 0x10))
-		{
-			DMAbuf_outputintr(devc->playback_dev, 1);
-		}
-		if (devc->model != MD_1848 && (alt_stat & 0x40))	/* Timer interrupt */
-		{
-			devc->timer_ticks++;
-#ifndef EXCLUDE_TIMERS
-			if (timer_installed == dev && devc->timer_running)
-				sound_timer_interrupt();
-#endif
-		}
-	}
-/*
- * Sometimes playback or capture interrupts occur while a timer interrupt
- * is being handled. The interrupt will not be retriggered if we don't
- * handle it now. Check if an interrupt is still pending and restart
- * the handler in this case.
- */
-	if (inb(io_Status(devc)) & 0x01 && cnt++ < 4)
-	{
-		  goto interrupt_again;
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- *	Experimental initialization sequence for the integrated sound system
- *	of the Compaq Deskpro M.
- */
-
-static int init_deskpro_m(struct address_info *hw_config)
-{
-	unsigned char   tmp;
-
-	if ((tmp = inb(0xc44)) == 0xff)
-	{
-		DDB(printk("init_deskpro_m: Dead port 0xc44\n"));
-		return 0;
-	}
-
-	outb(0x10, 0xc44);
-	outb(0x40, 0xc45);
-	outb(0x00, 0xc46);
-	outb(0xe8, 0xc47);
-	outb(0x14, 0xc44);
-	outb(0x40, 0xc45);
-	outb(0x00, 0xc46);
-	outb(0xe8, 0xc47);
-	outb(0x10, 0xc44);
-
-	return 1;
-}
-
-/*
- *	Experimental initialization sequence for the integrated sound system
- *	of Compaq Deskpro XL.
- */
-
-static int init_deskpro(struct address_info *hw_config)
-{
-	unsigned char   tmp;
-
-	if ((tmp = inb(0xc44)) == 0xff)
-	{
-		DDB(printk("init_deskpro: Dead port 0xc44\n"));
-		return 0;
-	}
-	outb((tmp | 0x04), 0xc44);	/* Select bank 1 */
-	if (inb(0xc44) != 0x04)
-	{
-		DDB(printk("init_deskpro: Invalid bank1 signature in port 0xc44\n"));
-		return 0;
-	}
-	/*
-	 * OK. It looks like a Deskpro so let's proceed.
-	 */
-
-	/*
-	 * I/O port 0xc44 Audio configuration register.
-	 *
-	 * bits 0xc0:   Audio revision bits
-	 *              0x00 = Compaq Business Audio
-	 *              0x40 = MS Sound System Compatible (reset default)
-	 *              0x80 = Reserved
-	 *              0xc0 = Reserved
-	 * bit 0x20:    No Wait State Enable
-	 *              0x00 = Disabled (reset default, DMA mode)
-	 *              0x20 = Enabled (programmed I/O mode)
-	 * bit 0x10:    MS Sound System Decode Enable
-	 *              0x00 = Decoding disabled (reset default)
-	 *              0x10 = Decoding enabled
-	 * bit 0x08:    FM Synthesis Decode Enable
-	 *              0x00 = Decoding Disabled (reset default)
-	 *              0x08 = Decoding enabled
-	 * bit 0x04     Bank select
-	 *              0x00 = Bank 0
-	 *              0x04 = Bank 1
-	 * bits 0x03    MSS Base address
-	 *              0x00 = 0x530 (reset default)
-	 *              0x01 = 0x604
-	 *              0x02 = 0xf40
-	 *              0x03 = 0xe80
-	 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc44 (before): ");
-	outb((tmp & ~0x04), 0xc44);
-	printk("%02x ", inb(0xc44));
-	outb((tmp | 0x04), 0xc44);
-	printk("%02x\n", inb(0xc44));
-#endif
-
-	/* Set bank 1 of the register */
-	tmp = 0x58;		/* MSS Mode, MSS&FM decode enabled */
-
-	switch (hw_config->io_base)
-	{
-		case 0x530:
-			tmp |= 0x00;
-			break;
-		case 0x604:
-			tmp |= 0x01;
-			break;
-		case 0xf40:
-			tmp |= 0x02;
-			break;
-		case 0xe80:
-			tmp |= 0x03;
-			break;
-		default:
-			DDB(printk("init_deskpro: Invalid MSS port %x\n", hw_config->io_base));
-			return 0;
-	}
-	outb((tmp & ~0x04), 0xc44);	/* Write to bank=0 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc44 (after): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc44));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc44));
-#endif
-
-	/*
-	 * I/O port 0xc45 FM Address Decode/MSS ID Register.
-	 *
-	 * bank=0, bits 0xfe:   FM synthesis Decode Compare bits 7:1 (default=0x88)
-	 * bank=0, bit 0x01:    SBIC Power Control Bit
-	 *                      0x00 = Powered up
-	 *                      0x01 = Powered down
-	 * bank=1, bits 0xfc:   MSS ID (default=0x40)
-	 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc45 (before): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc45));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc45));
-#endif
-
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	outb((0x88), 0xc45);	/* FM base 7:0 = 0x88 */
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	outb((0x10), 0xc45);	/* MSS ID = 0x10 (MSS port returns 0x04) */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc45 (after): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc45));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc45));
-#endif
-
-
-	/*
-	 * I/O port 0xc46 FM Address Decode/Address ASIC Revision Register.
-	 *
-	 * bank=0, bits 0xff:   FM synthesis Decode Compare bits 15:8 (default=0x03)
-	 * bank=1, bits 0xff:   Audio addressing ASIC id
-	 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc46 (before): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc46));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc46));
-#endif
-
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	outb((0x03), 0xc46);	/* FM base 15:8 = 0x03 */
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	outb((0x11), 0xc46);	/* ASIC ID = 0x11 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc46 (after): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc46));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc46));
-#endif
-
-	/*
-	 * I/O port 0xc47 FM Address Decode Register.
-	 *
-	 * bank=0, bits 0xff:   Decode enable selection for various FM address bits
-	 * bank=1, bits 0xff:   Reserved
-	 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc47 (before): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc47));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc47));
-#endif
-
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	outb((0x7c), 0xc47);	/* FM decode enable bits = 0x7c */
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	outb((0x00), 0xc47);	/* Reserved bank1 = 0x00 */
-
-#ifdef DEBUGXL
-	/* Debug printing */
-	printk("Port 0xc47 (after): ");
-	outb((tmp & ~0x04), 0xc44);	/* Select bank=0 */
-	printk("%02x ", inb(0xc47));
-	outb((tmp | 0x04), 0xc44);	/* Select bank=1 */
-	printk("%02x\n", inb(0xc47));
-#endif
-
-	/*
-	 * I/O port 0xc6f = Audio Disable Function Register
-	 */
-
-#ifdef DEBUGXL
-	printk("Port 0xc6f (before) = %02x\n", inb(0xc6f));
-#endif
-
-	outb((0x80), 0xc6f);
-
-#ifdef DEBUGXL
-	printk("Port 0xc6f (after) = %02x\n", inb(0xc6f));
-#endif
-
-	return 1;
-}
-
-int probe_ms_sound(struct address_info *hw_config, struct resource *ports)
-{
-	unsigned char   tmp;
-
-	DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype));
-
-	if (hw_config->card_subtype == 1)	/* Has no IRQ/DMA registers */
-	{
-		/* check_opl3(0x388, hw_config); */
-		return ad1848_detect(ports, NULL, hw_config->osp);
-	}
-
-	if (deskpro_xl && hw_config->card_subtype == 2)	/* Compaq Deskpro XL */
-	{
-		if (!init_deskpro(hw_config))
-			return 0;
-	}
-
-	if (deskpro_m)	/* Compaq Deskpro M */
-	{
-		if (!init_deskpro_m(hw_config))
-			return 0;
-	}
-
-	/*
-	   * Check if the IO port returns valid signature. The original MS Sound
-	   * system returns 0x04 while some cards (AudioTrix Pro for example)
-	   * return 0x00 or 0x0f.
-	 */
-
-	if ((tmp = inb(hw_config->io_base + 3)) == 0xff)	/* Bus float */
-	{
-		  int             ret;
-
-		  DDB(printk("I/O address is inactive (%x)\n", tmp));
-		  if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
-			  return 0;
-		  return 1;
-	}
-	DDB(printk("MSS signature = %x\n", tmp & 0x3f));
-	if ((tmp & 0x3f) != 0x04 &&
-	    (tmp & 0x3f) != 0x0f &&
-	    (tmp & 0x3f) != 0x00)
-	{
-		int ret;
-
-		MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, (int) inb(hw_config->io_base + 3)));
-		DDB(printk("Trying to detect codec anyway but IRQ/DMA may not work\n"));
-		if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
-			return 0;
-
-		hw_config->card_subtype = 1;
-		return 1;
-	}
-	if ((hw_config->irq != 5)  &&
-	    (hw_config->irq != 7)  &&
-	    (hw_config->irq != 9)  &&
-	    (hw_config->irq != 10) &&
-	    (hw_config->irq != 11) &&
-	    (hw_config->irq != 12))
-	{
-		printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
-		return 0;
-	}
-	if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3)
-	{
-		  printk(KERN_ERR "MSS: Bad DMA %d\n", hw_config->dma);
-		  return 0;
-	}
-	/*
-	 * Check that DMA0 is not in use with a 8 bit board.
-	 */
-
-	if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80)
-	{
-		printk(KERN_ERR "MSS: Can't use DMA0 with a 8 bit card/slot\n");
-		return 0;
-	}
-	if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80)
-	{
-		printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
-		return 0;
-	}
-	return ad1848_detect(ports, NULL, hw_config->osp);
-}
-
-void attach_ms_sound(struct address_info *hw_config, struct resource *ports, struct module *owner)
-{
-	static signed char interrupt_bits[12] =
-	{
-		-1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20
-	};
-	signed char     bits;
-	char            dma2_bit = 0;
-
-	static char     dma_bits[4] =
-	{
-		1, 2, 0, 3
-	};
-
-	int config_port = hw_config->io_base + 0;
-	int version_port = hw_config->io_base + 3;
-	int dma = hw_config->dma;
-	int dma2 = hw_config->dma2;
-
-	if (hw_config->card_subtype == 1)	/* Has no IRQ/DMA registers */
-	{
-		hw_config->slots[0] = ad1848_init("MS Sound System", ports,
-						    hw_config->irq,
-						    hw_config->dma,
-						    hw_config->dma2, 0, 
-						    hw_config->osp,
-						    owner);
-		return;
-	}
-	/*
-	 * Set the IRQ and DMA addresses.
-	 */
-
-	bits = interrupt_bits[hw_config->irq];
-	if (bits == -1)
-	{
-		printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
-		release_region(ports->start, 4);
-		release_region(ports->start - 4, 4);
-		return;
-	}
-	outb((bits | 0x40), config_port);
-	if ((inb(version_port) & 0x40) == 0)
-		printk(KERN_ERR "[MSS: IRQ Conflict?]\n");
-
-/*
- * Handle the capture DMA channel
- */
-
-	if (dma2 != -1 && dma2 != dma)
-	{
-		if (!((dma == 0 && dma2 == 1) ||
-			(dma == 1 && dma2 == 0) ||
-			(dma == 3 && dma2 == 0)))
-		{	/* Unsupported combination. Try to swap channels */
-			int tmp = dma;
-
-			dma = dma2;
-			dma2 = tmp;
-		}
-		if ((dma == 0 && dma2 == 1) ||
-			(dma == 1 && dma2 == 0) ||
-			(dma == 3 && dma2 == 0))
-		{
-			dma2_bit = 0x04;	/* Enable capture DMA */
-		}
-		else
-		{
-			printk(KERN_WARNING "MSS: Invalid capture DMA\n");
-			dma2 = dma;
-		}
-	}
-	else
-	{
-		dma2 = dma;
-	}
-
-	hw_config->dma = dma;
-	hw_config->dma2 = dma2;
-
-	outb((bits | dma_bits[dma] | dma2_bit), config_port);	/* Write IRQ+DMA setup */
-
-	hw_config->slots[0] = ad1848_init("MS Sound System", ports,
-					  hw_config->irq,
-					  dma, dma2, 0,
-					  hw_config->osp,
-					  THIS_MODULE);
-}
-
-void unload_ms_sound(struct address_info *hw_config)
-{
-	ad1848_unload(hw_config->io_base + 4,
-		      hw_config->irq,
-		      hw_config->dma,
-		      hw_config->dma2, 0);
-	sound_unload_audiodev(hw_config->slots[0]);
-	release_region(hw_config->io_base, 4);
-}
-
-#ifndef EXCLUDE_TIMERS
-
-/*
- * Timer stuff (for /dev/music).
- */
-
-static unsigned int current_interval;
-
-static unsigned int ad1848_tmr_start(int dev, unsigned int usecs)
-{
-	unsigned long   flags;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-	unsigned long   xtal_nsecs;	/* nanoseconds per xtal oscillator tick */
-	unsigned long   divider;
-
-	spin_lock_irqsave(&devc->lock,flags);
-
-	/*
-	 * Length of the timer interval (in nanoseconds) depends on the
-	 * selected crystal oscillator. Check this from bit 0x01 of I8.
-	 *
-	 * AD1845 has just one oscillator which has cycle time of 10.050 us
-	 * (when a 24.576 MHz xtal oscillator is used).
-	 *
-	 * Convert requested interval to nanoseconds before computing
-	 * the timer divider.
-	 */
-
-	if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
-		xtal_nsecs = 10050;
-	else if (ad_read(devc, 8) & 0x01)
-		xtal_nsecs = 9920;
-	else
-		xtal_nsecs = 9969;
-
-	divider = (usecs * 1000 + xtal_nsecs / 2) / xtal_nsecs;
-
-	if (divider < 100)	/* Don't allow shorter intervals than about 1ms */
-		divider = 100;
-
-	if (divider > 65535)	/* Overflow check */
-		divider = 65535;
-
-	ad_write(devc, 21, (divider >> 8) & 0xff);	/* Set upper bits */
-	ad_write(devc, 20, divider & 0xff);	/* Set lower bits */
-	ad_write(devc, 16, ad_read(devc, 16) | 0x40);	/* Start the timer */
-	devc->timer_running = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	return current_interval = (divider * xtal_nsecs + 500) / 1000;
-}
-
-static void ad1848_tmr_reprogram(int dev)
-{
-	/*
-	 *    Audio driver has changed sampling rate so that a different xtal
-	 *      oscillator was selected. We have to reprogram the timer rate.
-	 */
-
-	ad1848_tmr_start(dev, current_interval);
-	sound_timer_syncinterval(current_interval);
-}
-
-static void ad1848_tmr_disable(int dev)
-{
-	unsigned long   flags;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	ad_write(devc, 16, ad_read(devc, 16) & ~0x40);
-	devc->timer_running = 0;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void ad1848_tmr_restart(int dev)
-{
-	unsigned long   flags;
-	ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
-
-	if (current_interval == 0)
-		return;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	ad_write(devc, 16, ad_read(devc, 16) | 0x40);
-	devc->timer_running = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static struct sound_lowlev_timer ad1848_tmr =
-{
-	0,
-	2,
-	ad1848_tmr_start,
-	ad1848_tmr_disable,
-	ad1848_tmr_restart
-};
-
-static int ad1848_tmr_install(int dev)
-{
-	if (timer_installed != -1)
-		return 0;	/* Don't install another timer */
-
-	timer_installed = ad1848_tmr.dev = dev;
-	sound_timer_init(&ad1848_tmr, audio_devs[dev]->name);
-
-	return 1;
-}
-#endif /* EXCLUDE_TIMERS */
-
-EXPORT_SYMBOL(ad1848_detect);
-EXPORT_SYMBOL(ad1848_init);
-EXPORT_SYMBOL(ad1848_unload);
-EXPORT_SYMBOL(ad1848_control);
-EXPORT_SYMBOL(probe_ms_sound);
-EXPORT_SYMBOL(attach_ms_sound);
-EXPORT_SYMBOL(unload_ms_sound);
-
-static int __initdata io = -1;
-static int __initdata irq = -1;
-static int __initdata dma = -1;
-static int __initdata dma2 = -1;
-static int __initdata type = 0;
-
-module_param_hw(io, int, ioport, 0);	/* I/O for a raw AD1848 card */
-module_param_hw(irq, int, irq, 0);	/* IRQ to use */
-module_param_hw(dma, int, dma, 0);	/* First DMA channel */
-module_param_hw(dma2, int, dma, 0);	/* Second DMA channel */
-module_param(type, int, 0);		/* Card type */
-module_param(deskpro_xl, bool, 0);	/* Special magic for Deskpro XL boxen */
-module_param(deskpro_m, bool, 0);	/* Special magic for Deskpro M box */
-module_param(soundpro, bool, 0);	/* More special magic for SoundPro chips */
-
-#ifdef CONFIG_PNP
-module_param(isapnp, int, 0);
-module_param(isapnpjump, int, 0);
-module_param(reverse, bool, 0);
-MODULE_PARM_DESC(isapnp,	"When set to 0, Plug & Play support will be disabled");
-MODULE_PARM_DESC(isapnpjump,	"Jumps to a specific slot in the driver's PnP table. Use the source, Luke.");
-MODULE_PARM_DESC(reverse,	"When set to 1, will reverse ISAPnP search order");
-
-static struct pnp_dev	*ad1848_dev  = NULL;
-
-/* Please add new entries at the end of the table */
-static struct {
-	char *name;
-	unsigned short	card_vendor, card_device,
-			vendor, function;
-	short mss_io, irq, dma, dma2;   /* index into isapnp table */
-        int type;
-} ad1848_isapnp_list[] __initdata = {
-	{"CMI 8330 SoundPRO",
-		ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
-		ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001),
-		0, 0, 0,-1, 0},
-        {"CS4232 based card",
-                ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000),
-		0, 0, 0, 1, 0},
-        {"CS4232 based card",
-                ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100),
-		0, 0, 0, 1, 0},
-        {"OPL3-SA2 WSS mode",
-        	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021),
-                1, 0, 0, 1, 1},
-	{"Advanced Gravis InterWave Audio",
-		ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
-		ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000),
-		0, 0, 0, 1, 0},
-	{NULL}
-};
-
-#ifdef MODULE
-static struct isapnp_device_id id_table[] = {
-	{	ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
-		ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 },
-        {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 },
-        {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 },
-	/* The main driver for this card is opl3sa2
-        {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 },
-	*/
-	{	ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
-		ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(isapnp, id_table);
-#endif
-
-static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev)
-{
-	int err;
-
-	err = pnp_device_attach(dev);
-	if (err < 0)
-		return(NULL);
-
-	if((err = pnp_activate_dev(dev)) < 0) {
-		printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err);
-
-		pnp_device_detach(dev);
-
-		return(NULL);
-	}
-	audio_activated = 1;
-	return(dev);
-}
-
-static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
-				struct address_info *hw_config, int slot)
-{
-
-	/* Configure Audio device */
-	if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL)))
-	{
-		if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev)))
-		{
-			hw_config->io_base 	= pnp_port_start(ad1848_dev, ad1848_isapnp_list[slot].mss_io);
-			hw_config->irq 		= pnp_irq(ad1848_dev, ad1848_isapnp_list[slot].irq);
-			hw_config->dma 		= pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma);
-			if(ad1848_isapnp_list[slot].dma2 != -1)
-				hw_config->dma2 = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma2);
-			else
-				hw_config->dma2 = -1;
-                        hw_config->card_subtype = ad1848_isapnp_list[slot].type;
-		} else
-			return(NULL);
-	} else
-		return(NULL);
-
-	return(ad1848_dev);
-}
-
-static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot)
-{
-	char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name;
-
-	/* Initialize this baby. */
-
-	if(ad1848_init_generic(bus, hw_config, slot)) {
-		/* We got it. */
-
-		printk(KERN_NOTICE "ad1848: PnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n",
-		       busname,
-		       hw_config->io_base, hw_config->irq, hw_config->dma,
-		       hw_config->dma2);
-		return 1;
-	}
-	return 0;
-}
-
-static int __init ad1848_isapnp_probe(struct address_info *hw_config)
-{
-	static int first = 1;
-	int i;
-
-	/* Count entries in sb_isapnp_list */
-	for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++);
-	i--;
-
-	/* Check and adjust isapnpjump */
-	if( isapnpjump < 0 || isapnpjump > i) {
-		isapnpjump = reverse ? i : 0;
-		printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump);
-	}
-
-	if(!first || !reverse)
-		i = isapnpjump;
-	first = 0;
-	while(ad1848_isapnp_list[i].card_vendor != 0) {
-		static struct pnp_card *bus = NULL;
-
-		while ((bus = pnp_find_card(
-				ad1848_isapnp_list[i].card_vendor,
-				ad1848_isapnp_list[i].card_device,
-				bus))) {
-
-			if(ad1848_isapnp_init(hw_config, bus, i)) {
-				isapnpjump = i; /* start next search from here */
-				return 0;
-			}
-		}
-		i += reverse ? -1 : 1;
-	}
-
-	return -ENODEV;
-}
-#endif
-
-
-static int __init init_ad1848(void)
-{
-	printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
-#ifdef CONFIG_PNP
-	if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) {
-		printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n");
-		isapnp = 0;
-	}
-#endif
-
-	if(io != -1) {
-		struct resource *ports;
-	        if( isapnp == 0 )
-	        {
-			if(irq == -1 || dma == -1) {
-				printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n");
-				return -EINVAL;
-			}
-
-			cfg.irq = irq;
-			cfg.io_base = io;
-			cfg.dma = dma;
-			cfg.dma2 = dma2;
-			cfg.card_subtype = type;
-	        }
-
-		ports = request_region(io + 4, 4, "ad1848");
-
-		if (!ports)
-			return -EBUSY;
-
-		if (!request_region(io, 4, "WSS config")) {
-			release_region(io + 4, 4);
-			return -EBUSY;
-		}
-
-		if (!probe_ms_sound(&cfg, ports)) {
-			release_region(io + 4, 4);
-			release_region(io, 4);
-			return -ENODEV;
-		}
-		attach_ms_sound(&cfg, ports, THIS_MODULE);
-		loaded = 1;
-	}
-	return 0;
-}
-
-static void __exit cleanup_ad1848(void)
-{
-	if(loaded)
-		unload_ms_sound(&cfg);
-
-#ifdef CONFIG_PNP
-	if(ad1848_dev){
-		if(audio_activated)
-			pnp_device_detach(ad1848_dev);
-	}
-#endif
-}
-
-module_init(init_ad1848);
-module_exit(cleanup_ad1848);
-
-#ifndef MODULE
-static int __init setup_ad1848(char *str)
-{
-        /* io, irq, dma, dma2, type */
-	int ints[6];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma2	= ints[4];
-	type	= ints[5];
-
-	return 1;
-}
-
-__setup("ad1848=", setup_ad1848);	
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/ad1848.h b/sound/oss/ad1848.h
deleted file mode 100644
index b95ebe28d426..000000000000
--- a/sound/oss/ad1848.h
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#include <linux/interrupt.h>
-
-#define AD_F_CS4231     0x0001  /* Returned if a CS4232 (or compatible) detected */
-#define AD_F_CS4248     0x0001  /* Returned if a CS4248 (or compatible) detected */
-
-#define         AD1848_SET_XTAL         1
-#define         AD1848_MIXER_REROUTE    2
-
-#define AD1848_REROUTE(oldctl, newctl) \
-                ad1848_control(AD1848_MIXER_REROUTE, ((oldctl)<<8)|(newctl))
-		
-
-int ad1848_init(char *name, struct resource *ports, int irq, int dma_playback,
-	int dma_capture, int share_dma, int *osp, struct module *owner);
-void ad1848_unload (int io_base, int irq, int dma_playback, int dma_capture, int share_dma);
-
-int ad1848_detect (struct resource *ports, int *flags, int *osp);
-int ad1848_control(int cmd, int arg);
-
-void attach_ms_sound(struct address_info * hw_config, struct resource *ports, struct module * owner);
-
-int probe_ms_sound(struct address_info *hw_config, struct resource *ports);
-void unload_ms_sound(struct address_info *hw_info);
diff --git a/sound/oss/ad1848_mixer.h b/sound/oss/ad1848_mixer.h
deleted file mode 100644
index 2cf719b5fbbc..000000000000
--- a/sound/oss/ad1848_mixer.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * sound/oss/ad1848_mixer.h
- *
- * Definitions for the mixer of AD1848 and compatible codecs.
- */
-
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-/*
- * The AD1848 codec has generic input lines called Line, Aux1 and Aux2.
- * Sound card manufacturers have connected actual inputs (CD, synth, line,
- * etc) to these inputs in different order. Therefore it's difficult
- * to assign mixer channels to these inputs correctly. The following
- * contains two alternative mappings. The first one is for GUS MAX and
- * the second is just a generic one (line1, line2 and line3).
- * (Actually this is not a mapping but rather some kind of interleaving
- * solution).
- */
-#define MODE1_REC_DEVICES		(SOUND_MASK_LINE3 | SOUND_MASK_MIC | \
-					 SOUND_MASK_LINE1 | SOUND_MASK_IMIX)
-
-#define SPRO_REC_DEVICES		(SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD | SOUND_MASK_LINE1)
-
-#define MODE1_MIXER_DEVICES		(SOUND_MASK_LINE1 | SOUND_MASK_MIC | \
-					 SOUND_MASK_LINE2 | \
-					 SOUND_MASK_IGAIN | \
-					 SOUND_MASK_PCM | SOUND_MASK_IMIX)
-
-#define MODE2_MIXER_DEVICES		(SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
-					 SOUND_MASK_MIC | \
-					 SOUND_MASK_LINE3 | SOUND_MASK_SPEAKER | \
-					 SOUND_MASK_IGAIN | \
-					 SOUND_MASK_PCM | SOUND_MASK_IMIX)
-
-#define MODE3_MIXER_DEVICES		(MODE2_MIXER_DEVICES | SOUND_MASK_VOLUME)
-
-/* OPTi 82C930 has no IMIX level control, but it can still be selected as an
- * input
- */
-#define C930_MIXER_DEVICES	(SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
-				 SOUND_MASK_MIC | SOUND_MASK_VOLUME | \
-				 SOUND_MASK_LINE3 | \
-				 SOUND_MASK_IGAIN | SOUND_MASK_PCM)
-
-#define SPRO_MIXER_DEVICES	(SOUND_MASK_VOLUME | SOUND_MASK_PCM | \
-				 SOUND_MASK_LINE | SOUND_MASK_SYNTH | \
-				 SOUND_MASK_CD | SOUND_MASK_MIC | \
-				 SOUND_MASK_SPEAKER | SOUND_MASK_LINE1 | \
-				 SOUND_MASK_OGAIN)
-
-struct mixer_def {
-	unsigned int regno:6;		/* register number for volume */
-	unsigned int polarity:1;	/* volume polarity: 0=normal, 1=reversed */
-	unsigned int bitpos:3;		/* position of bits in register for volume */
-	unsigned int nbits:3;		/* number of bits in register for volume */
-	unsigned int mutereg:6;		/* register number for mute bit */
-	unsigned int mutepol:1;		/* mute polarity: 0=normal, 1=reversed */
-	unsigned int mutepos:4;		/* position of mute bit in register */
-	unsigned int recreg:6;		/* register number for recording bit */
-	unsigned int recpol:1;		/* recording polarity: 0=normal, 1=reversed */
-	unsigned int recpos:4;		/* position of recording bit in register */
-};
-
-static char mix_cvt[101] = {
-	 0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42,
-	43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65,
-	65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79,
-	80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90,
-	91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99,
-	100
-};
-
-typedef struct mixer_def mixer_ent;
-typedef mixer_ent mixer_ents[2];
-
-/*
- * Most of the mixer entries work in backwards. Setting the polarity field
- * makes them to work correctly.
- *
- * The channel numbering used by individual sound cards is not fixed. Some
- * cards have assigned different meanings for the AUX1, AUX2 and LINE inputs.
- * The current version doesn't try to compensate this.
- */
-
-#define MIX_ENT(name, reg_l, pola_l, pos_l, len_l, reg_r, pola_r, pos_r, len_r, mute_bit)	\
-	[name] = {{reg_l, pola_l, pos_l, len_l, reg_l, 0, mute_bit, 0, 0, 8},			\
-		  {reg_r, pola_r, pos_r, len_r, reg_r, 0, mute_bit, 0, 0, 8}}
-
-#define MIX_ENT2(name, reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \
-		    rec_reg_l, rec_pola_l, rec_pos_l,					 \
-		 reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r,	 \
-		    rec_reg_r, rec_pola_r, rec_pos_r)					 \
-	[name] = {{reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l,	 \
-		    rec_reg_l, rec_pola_l, rec_pos_l},					 \
-		  {reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r,	 \
-		    rec_reg_r, rec_pola_r, rec_pos_r}}
-
-static mixer_ents ad1848_mix_devices[32] = {
-	MIX_ENT(SOUND_MIXER_VOLUME,	27, 1, 0, 4,	29, 1, 0, 4,  8),
-	MIX_ENT(SOUND_MIXER_BASS,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_TREBLE,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_SYNTH,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_PCM,	 6, 1, 0, 6,	 7, 1, 0, 6,  7),
-	MIX_ENT(SOUND_MIXER_SPEAKER,	26, 1, 0, 4,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE,	18, 1, 0, 5,	19, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_MIC,	 0, 0, 5, 1,	 1, 0, 5, 1,  8),
-	MIX_ENT(SOUND_MIXER_CD,		 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_IMIX,	13, 1, 2, 6,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_ALTPCM,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_RECLEV,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_IGAIN,	 0, 0, 0, 4,	 1, 0, 0, 4,  8),
-	MIX_ENT(SOUND_MIXER_OGAIN,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE1,	 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE2,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE3,	18, 1, 0, 5,	19, 1, 0, 5,  7)
-};
-
-static mixer_ents iwave_mix_devices[32] = {
-	MIX_ENT(SOUND_MIXER_VOLUME,	25, 1, 0, 5,	27, 1, 0, 5,  8),
-	MIX_ENT(SOUND_MIXER_BASS,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_TREBLE,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_SYNTH,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_PCM,	 6, 1, 0, 6,	 7, 1, 0, 6,  7),
-	MIX_ENT(SOUND_MIXER_SPEAKER,	26, 1, 0, 4,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE,	18, 1, 0, 5,	19, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_MIC,	 0, 0, 5, 1,	 1, 0, 5, 1,  8),
-	MIX_ENT(SOUND_MIXER_CD,		 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_IMIX,	16, 1, 0, 5,	17, 1, 0, 5,  8),
-	MIX_ENT(SOUND_MIXER_ALTPCM,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_RECLEV,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_IGAIN,	 0, 0, 0, 4,	 1, 0, 0, 4,  8),
-	MIX_ENT(SOUND_MIXER_OGAIN,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE1,	 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE2,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE3,	18, 1, 0, 5,	19, 1, 0, 5,  7)
-};
-
-static mixer_ents cs42xb_mix_devices[32] = {
-	/* Digital master volume actually has seven bits, but we only use
-	   six to avoid the discontinuity when the analog gain kicks in. */
-	MIX_ENT(SOUND_MIXER_VOLUME,	46, 1, 0, 6,	47, 1, 0, 6,  7),
-	MIX_ENT(SOUND_MIXER_BASS,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_TREBLE,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_SYNTH,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_PCM,	 6, 1, 0, 6,	 7, 1, 0, 6,  7),
-	MIX_ENT(SOUND_MIXER_SPEAKER,	26, 1, 0, 4,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE,	18, 1, 0, 5,	19, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_MIC,	34, 1, 0, 5,	35, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_CD,		 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	/* For the IMIX entry, it was not possible to use the MIX_ENT macro
-	   because the mute bit is in different positions for the two
-	   channels and requires reverse polarity. */
-	[SOUND_MIXER_IMIX] = {{13, 1, 2, 6, 13, 1, 0, 0, 0, 8},
-		      {42, 1, 0, 6, 42, 1, 7, 0, 0, 8}},
-	MIX_ENT(SOUND_MIXER_ALTPCM,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_RECLEV,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_IGAIN,	 0, 0, 0, 4,	 1, 0, 0, 4,  8),
-	MIX_ENT(SOUND_MIXER_OGAIN,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE1,	 2, 1, 0, 5,	 3, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE2,	 4, 1, 0, 5,	 5, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE3,	38, 1, 0, 6,	39, 1, 0, 6,  7)
-};
-
-/* OPTi 82C930 has somewhat different port addresses.
- * Note: VOLUME == SPEAKER, SYNTH == LINE2, LINE == LINE3, CD == LINE1
- * VOLUME, SYNTH, LINE, CD are not enabled above.
- * MIC is level of mic monitoring direct to output. Same for CD, LINE, etc.
- */
-static mixer_ents c930_mix_devices[32] = {
-	MIX_ENT(SOUND_MIXER_VOLUME,	22, 1, 1, 5,	23, 1, 1, 5,  7),
-	MIX_ENT(SOUND_MIXER_BASS,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_TREBLE,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_SYNTH,	 4, 1, 1, 4,	 5, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_PCM,	 6, 1, 0, 5,	 7, 1, 0, 5,  7),
-	MIX_ENT(SOUND_MIXER_SPEAKER,	22, 1, 1, 5,	23, 1, 1, 5,  7),
-	MIX_ENT(SOUND_MIXER_LINE,	18, 1, 1, 4,	19, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_MIC,	20, 1, 1, 4,	21, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_CD,		 2, 1, 1, 4,	 3, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_IMIX,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_ALTPCM,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_RECLEV,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_IGAIN,	 0, 0, 0, 4,	 1, 0, 0, 4,  8),
-	MIX_ENT(SOUND_MIXER_OGAIN,	 0, 0, 0, 0,	 0, 0, 0, 0,  8),
-	MIX_ENT(SOUND_MIXER_LINE1,	 2, 1, 1, 4,	 3, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_LINE2,	 4, 1, 1, 4,	 5, 1, 1, 4,  7),
-	MIX_ENT(SOUND_MIXER_LINE3,	18, 1, 1, 4,	19, 1, 1, 4,  7)
-};
-
-static mixer_ents spro_mix_devices[32] = {
-	MIX_ENT (SOUND_MIXER_VOLUME,	19, 0, 4, 4,			 19, 0, 0, 4,  8),
-	MIX_ENT (SOUND_MIXER_BASS,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT (SOUND_MIXER_TREBLE,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT2(SOUND_MIXER_SYNTH,	 4, 1, 1, 4, 23, 0, 3,  0, 0, 8,
-		 			 5, 1, 1, 4, 23, 0, 3, 0, 0, 8),
-	MIX_ENT (SOUND_MIXER_PCM,	 6, 1, 1, 4,			  7, 1, 1, 4,  8),
-	MIX_ENT (SOUND_MIXER_SPEAKER,	18, 0, 3, 2,			  0, 0, 0, 0,  8),
-	MIX_ENT2(SOUND_MIXER_LINE,	20, 0, 4, 4, 17, 1, 4, 16, 0, 2,
-		 			20, 0, 0, 4, 17, 1, 3, 16, 0, 1),
-	MIX_ENT2(SOUND_MIXER_MIC,	18, 0, 0, 3, 17, 1, 0, 16, 0, 0,
-		 			 0, 0, 0, 0,  0, 0, 0,  0, 0, 0),
-	MIX_ENT2(SOUND_MIXER_CD,	21, 0, 4, 4, 17, 1, 2, 16, 0, 4,
-					21, 0, 0, 4, 17, 1, 1, 16, 0, 3),
-	MIX_ENT (SOUND_MIXER_IMIX,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT (SOUND_MIXER_ALTPCM,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT (SOUND_MIXER_RECLEV,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT (SOUND_MIXER_IGAIN,	 0, 0, 0, 0,			  0, 0, 0, 0,  8),
-	MIX_ENT (SOUND_MIXER_OGAIN,	17, 1, 6, 1,			  0, 0, 0, 0,  8),
-	/* This is external wavetable */
-	MIX_ENT2(SOUND_MIXER_LINE1,	22, 0, 4, 4, 23, 1, 1, 23, 0, 4,
-		 			22, 0, 0, 4, 23, 1, 0, 23, 0, 5),
-};
-
-static int default_mixer_levels[32] =
-{
-	0x3232,			/* Master Volume */
-	0x3232,			/* Bass */
-	0x3232,			/* Treble */
-	0x4b4b,			/* FM */
-	0x3232,			/* PCM */
-	0x1515,			/* PC Speaker */
-	0x2020,			/* Ext Line */
-	0x1010,			/* Mic */
-	0x4b4b,			/* CD */
-	0x0000,			/* Recording monitor */
-	0x4b4b,			/* Second PCM */
-	0x4b4b,			/* Recording level */
-	0x4b4b,			/* Input gain */
-	0x4b4b,			/* Output gain */
-	0x2020,			/* Line1 */
-	0x2020,			/* Line2 */
-	0x1515			/* Line3 (usually line in)*/
-};
-
-#define LEFT_CHN	0
-#define RIGHT_CHN	1
-
-/*
- * Channel enable bits for ioctl(SOUND_MIXER_PRIVATE1)
- */
-
-#ifndef AUDIO_SPEAKER
-#define	AUDIO_SPEAKER		0x01	/* Enable mono output */
-#define	AUDIO_HEADPHONE		0x02	/* Sparc only */
-#define	AUDIO_LINE_OUT		0x04	/* Sparc only */
-#endif
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
deleted file mode 100644
index f058ed6bdb69..000000000000
--- a/sound/oss/aedsp16.c
+++ /dev/null
@@ -1,1373 +0,0 @@
-/*
-   sound/oss/aedsp16.c
-
-   Audio Excel DSP 16 software configuration routines
-   Copyright (C) 1995,1996,1997,1998  Riccardo Facchetti (fizban@tin.it)
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-/*
- * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
- * headers needed by this source.
- */
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include "sound_config.h"
-
-/*
-
-   READ THIS
-
-   This module started to configure the Audio Excel DSP 16 Sound Card.
-   Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
-
-   NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
-   audio card and want to see the kernel support for it, please contact me.
-
-   Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
-   compatible card.
-   It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
-   so before this module, the only way to configure the DSP under linux was
-   boot the MS-DOS loading the sound.sys device driver (this driver soft-
-   configure the sound board hardware by massaging someone of its registers),
-   and then ctrl-alt-del to boot linux with the DSP configured by the DOS
-   driver.
-
-   This module works configuring your Audio Excel DSP 16's irq, dma and
-   mpu-401-irq. The OSS Lite routines rely on the fact that if the
-   hardware is there, they can detect it. The problem with AEDSP16 is
-   that no hardware can be found by the probe routines if the sound card
-   is not configured properly. Sometimes the kernel probe routines can find
-   an SBPRO even when the card is not configured (this is the standard setup
-   of the card), but the SBPRO emulation don't work well if the card is not
-   properly initialized. For this reason
-
-   aedsp16_init_board()
-
-   routine is called before the OSS Lite probe routines try to detect the
-   hardware.
-
-   NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
-
-   NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
-   have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
-   have to be configured by software.
-
-   NOTE: The driver is merged with the new OSS Lite sound driver. It works
-   as a lowlevel driver.
-
-   The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
-   the OSS Lite sound driver can be configured for SBPRO and MSS cards
-   at the same time, but the aedsp16 can't be two cards!!
-   When we configure it, we have to choose the SBPRO or the MSS emulation
-   for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
-
-   NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
-   please let me know if it works.
-
-   The MPU-401 support can be compiled in together with one of the other
-   two operating modes.
-
-   NOTE: This is something like plug-and-play: we have only to plug
-   the AEDSP16 board in the socket, and then configure and compile
-   a kernel that uses the AEDSP16 software configuration capability.
-   No jumper setting is needed!
-
-   For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
-   you have just to make config the OSS Lite package, configuring
-   the AEDSP16 sound card, then activating the SBPro emulation mode
-   and at last configuring IRQ and DMA.
-   Compile the kernel and run it.
-
-   NOTE: This means for SC-6000 cards that you can choose irq and dma,
-   but not the I/O addresses. To change I/O addresses you have to set
-   them with jumpers. For SC-6600 cards you have no jumpers so you have
-   to set up your full card configuration in the make config.
-
-   You can change the irq/dma/mirq settings WITHOUT THE NEED to open
-   your computer and massage the jumpers (there are no irq/dma/mirq
-   jumpers to be configured anyway, only I/O BASE values have to be
-   configured with jumpers)
-
-   For some ununderstandable reason, the card default of irq 7, dma 1,
-   don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
-   HDD work, the kernel start to erupt out a lot of messages like:
-
-   'Sound: DMA timed out - IRQ/DRQ config error?'
-
-   For what I can say, I have NOT any conflict at irq 7 (under linux I'm
-   using the lp polling driver), and dma line 1 is unused as stated by
-   /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
-   I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
-   Anyway a setting of irq 10, dma 3 works really fine.
-
-   NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
-   the emulation mode, all the installed hardware and the hardware
-   configuration (irq and dma settings of all the hardware).
-
-   This init module should work with SBPRO+MSS, when one of the two is
-   the AEDSP16 emulation and the other the real card. (see [1])
-   For example:
-
-   AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
-   AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
-
-   MPU401 should work. (see [2])
-
-   [1]
-       ---
-       Date: Mon, 29 Jul 1997 08:35:40 +0100
-       From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
-
-       [...]
-       Just to let you know got my Audio Excel (emulating a MSS) working
-       with my original SB16, thanks for the driver!
-       [...]
-       ---
-
-   [2] Not tested by me for lack of hardware.
-
-   TODO, WISHES AND TECH
-
-   - About I/O ports allocation -
-
-   Request the 2x0h region (port base) in any case if we are using this card.
-
-   NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
-   port base region (see code) does not mean necessarily that we are emulating
-   sbpro.  Even if this region is the sbpro I/O ports region, we use this
-   region to access the control registers of the card, and if emulating
-   sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
-   registers are not used, in no way, to emulate an sbpro: they are
-   used only for configuration purposes.
-
-   Started Fri Mar 17 16:13:18 MET 1995
-
-   v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c)
-   - Initial code.
-   v0.2 (ALPHA)
-   - Cleanups.
-   - Integrated with Linux voxware v 2.90-2 kernel sound driver.
-   - SoundBlaster Pro mode configuration.
-   - Microsoft Sound System mode configuration.
-   - MPU-401 mode configuration.
-   v0.3 (ALPHA)
-   - Cleanups.
-   - Rearranged the code to let aedsp16_init_board be more general.
-   - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
-   inclusion too. We rely on os.h
-   - Used the  to get a variable
-   len string (we are not sure about the len of Copyright string).
-   This works with any SB and compatible.
-   - Added the code to request_region at device init (should go in
-   the main body of voxware).
-   v0.4 (BETA)
-   - Better configure.c patch for aedsp16 configuration (better
-   logic of inclusion of AEDSP16 support)
-   - Modified the conditional compilation to better support more than
-   one sound card of the emulated type (read the NOTES above)
-   - Moved the sb init routine from the attach to the very first
-   probe in sb_card.c
-   - Rearrangements and cleanups
-   - Wiped out some unnecessary code and variables: this is kernel
-   code so it is better save some TEXT and DATA
-   - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
-   I/O ports in any case because they are used to access the DSP
-   configuration registers and we can not allow anyone to get them.
-   v0.5
-   - cleanups on comments
-   - prep for diffs against v3.0-proto-950402
-   v0.6
-   - removed the request_region()s when compiling the MODULE sound.o
-   because we are not allowed (by the actual voxware structure) to
-   release_region()
-   v0.7 (pre ALPHA, not distributed)
-   - started porting this module to kernel 1.3.84. Dummy probe/attach
-   routines.
-   v0.8 (ALPHA)
-   - attached all the init routines.
-   v0.9 (BETA)
-   - Integrated with linux-pre2.0.7
-   - Integrated with configuration scripts.
-   - Cleaned up and beautyfied the code.
-   v0.9.9 (BETA)
-   - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
-     Now only the code configured is compiled in, with some memory saving.
-   v0.9.10
-   - Integration into the sound/lowlevel/ section of the sound driver.
-   - Re-organized the code.
-   v0.9.11 (not distributed)
-   - Rewritten the init interface-routines to initialize the AEDSP16 in
-     one shot.
-   - More cosmetics.
-   - SC-6600 support.
-   - More soft/hard configuration.
-   v0.9.12
-   - Refined the v0.9.11 code with conditional compilation to distinguish
-     between SC-6000 and SC-6600 code.
-   v1.0.0
-   - Prep for merging with OSS Lite and Linux kernel 2.1.13
-   - Corrected a bug in request/check/release region calls (thanks to the
-     new kernel exception handling).
-   v1.1
-   - Revamped for integration with new modularized sound drivers: to enhance
-     the flexibility of modular version, I have removed all the conditional
-     compilation for SBPRO, MPU and MSS code. Now it is all managed with
-     the ae_config structure.
-   v1.2
-   - Module informations added.
-   - Removed aedsp16_delay_10msec(), now using mdelay(10)
-   - All data and funcs moved to .*.init section.
-   v1.3
-   Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
-   - got rid of check_region
-
-   Known Problems:
-   - Audio Excel DSP 16 III don't work with this driver.
-
-   Credits:
-   Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
-   lot in testing the 0.9.11 and 0.9.12 versions of this driver.
-
- */
-
-
-#define VERSION "1.3"		/* Version of Audio Excel DSP 16 driver */
-
-#undef	AEDSP16_DEBUG 		/* Define this to 1 to enable debug code     */
-#undef	AEDSP16_DEBUG_MORE 	/* Define this to 1 to enable more debug     */
-#undef	AEDSP16_INFO 		/* Define this to 1 to enable info code      */
-
-#if defined(AEDSP16_DEBUG)
-# define DBG(x)  printk x
-# if defined(AEDSP16_DEBUG_MORE)
-#  define DBG1(x) printk x
-# else
-#  define DBG1(x)
-# endif
-#else
-# define DBG(x)
-# define DBG1(x)
-#endif
-
-/*
- * Misc definitions
- */
-#define TRUE	1
-#define FALSE	0
-
-/*
- * Region Size for request/check/release region.
- */
-#define IOBASE_REGION_SIZE	0x10
-
-/*
- * Hardware related defaults
- */
-#define DEF_AEDSP16_IOB 0x220   /* 0x220(default) 0x240                 */
-#define DEF_AEDSP16_IRQ 7	/* 5 7(default) 9 10 11                 */
-#define DEF_AEDSP16_MRQ 0	/* 5 7 9 10 0(default), 0 means disable */
-#define DEF_AEDSP16_DMA 1	/* 0 1(default) 3                       */
-
-/*
- * Commands of AEDSP16's DSP (SBPRO+special).
- * Some of them are COMMAND_xx, in the future they may change.
- */
-#define WRITE_MDIRQ_CFG   0x50	/* Set M&I&DRQ mask (the real config)   */
-#define COMMAND_52        0x52	/*                                      */
-#define READ_HARD_CFG     0x58	/* Read Hardware Config (I/O base etc)  */
-#define COMMAND_5C        0x5c	/*                                      */
-#define COMMAND_60        0x60	/*                                      */
-#define COMMAND_66        0x66	/*                                      */
-#define COMMAND_6C        0x6c	/*                                      */
-#define COMMAND_6E        0x6e	/*                                      */
-#define COMMAND_88        0x88	/*                                      */
-#define DSP_INIT_MSS      0x8c	/* Enable Microsoft Sound System mode   */
-#define COMMAND_C5        0xc5	/*                                      */
-#define GET_DSP_VERSION   0xe1	/* Get DSP Version                      */
-#define GET_DSP_COPYRIGHT 0xe3	/* Get DSP Copyright                    */
-
-/*
- * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
- * to have the actual I/O port.
- * Register permissions are:
- * (wo) == Write Only
- * (ro) == Read  Only
- * (w-) == Write
- * (r-) == Read
- */
-#define DSP_RESET    0x06	/* offset of DSP RESET             (wo) */
-#define DSP_READ     0x0a	/* offset of DSP READ              (ro) */
-#define DSP_WRITE    0x0c	/* offset of DSP WRITE             (w-) */
-#define DSP_COMMAND  0x0c	/* offset of DSP COMMAND           (w-) */
-#define DSP_STATUS   0x0c	/* offset of DSP STATUS            (r-) */
-#define DSP_DATAVAIL 0x0e	/* offset of DSP DATA AVAILABLE    (ro) */
-
-
-#define RETRY           10	/* Various retry values on I/O opera-   */
-#define STATUSRETRY   1000	/* tions. Sometimes we have to          */
-#define HARDRETRY   500000	/* wait for previous cmd to complete    */
-
-/*
- * Size of character arrays that store name and version of sound card
- */
-#define CARDNAMELEN	15	/* Size of the card's name in chars     */
-#define CARDVERLEN	10	/* Size of the card's version in chars	*/
-#define CARDVERDIGITS	2	/* Number of digits in the version	*/
-
-#if defined(CONFIG_SC6600)
-/*
- * Bitmapped flags of hard configuration
- */
-/*
- * Decode macros (xl == low byte, xh = high byte)
- */
-#define IOBASE(xl)		((xl & 0x01)?0x240:0x220)
-#define JOY(xl)  		(xl & 0x02)
-#define MPUADDR(xl)		( 			\
-				(xl & 0x0C)?0x330:	\
-				(xl & 0x08)?0x320:	\
-				(xl & 0x04)?0x310:	\
-						0x300)
-#define WSSADDR(xl)		((xl & 0x10)?0xE80:0x530)
-#define CDROM(xh)		(xh & 0x20)
-#define CDROMADDR(xh)		(((xh & 0x1F) << 4) + 0x200)
-/*
- * Encode macros
- */
-#define BLDIOBASE(xl, val) {		\
-	xl &= ~0x01; 			\
-	if (val == 0x240)		\
-		xl |= 0x01;		\
-	}
-#define BLDJOY(xl, val) {		\
-	xl &= ~0x02; 			\
-	if (val == 1)			\
-		xl |= 0x02;		\
-	}
-#define BLDMPUADDR(xl, val) {		\
-	xl &= ~0x0C;			\
-	switch (val) {			\
-		case 0x330:		\
-			xl |= 0x0C;	\
-			break;		\
-		case 0x320:		\
-			xl |= 0x08;	\
-			break;		\
-		case 0x310:		\
-			xl |= 0x04;	\
-			break;		\
-		case 0x300:		\
-			xl |= 0x00;	\
-			break;		\
-		default:		\
-			xl |= 0x00;	\
-			break;		\
-		}			\
-	}
-#define BLDWSSADDR(xl, val) {		\
-	xl &= ~0x10; 			\
-	if (val == 0xE80)		\
-		xl |= 0x10;		\
-	}
-#define BLDCDROM(xh, val) {		\
-	xh &= ~0x20; 			\
-	if (val == 1)			\
-		xh |= 0x20;		\
-	}
-#define BLDCDROMADDR(xh, val) {		\
-	int tmp = val;			\
-	tmp -= 0x200;			\
-	tmp >>= 4;			\
-	tmp &= 0x1F;			\
-	xh |= tmp;			\
-	xh &= 0x7F;			\
-	xh |= 0x40;			\
-	}
-#endif /* CONFIG_SC6600 */
-
-/*
- * Bit mapped flags for calling aedsp16_init_board(), and saving the current
- * emulation mode.
- */
-#define INIT_NONE   (0   )
-#define INIT_SBPRO  (1<<0)
-#define INIT_MSS    (1<<1)
-#define INIT_MPU401 (1<<2)
-
-static int      soft_cfg __initdata = 0;	/* bitmapped config */
-static int      soft_cfg_mss __initdata = 0;	/* bitmapped mss config */
-static int      ver[CARDVERDIGITS] __initdata = {0, 0};	/* DSP Ver:
-						   hi->ver[0] lo->ver[1] */
-
-#if defined(CONFIG_SC6600)
-static int	hard_cfg[2]     /* lo<-hard_cfg[0] hi<-hard_cfg[1]      */
-                     __initdata = { 0, 0};
-#endif /* CONFIG_SC6600 */
-
-#if defined(CONFIG_SC6600)
-/* Decoded hard configuration */
-struct	d_hcfg {
-	int iobase;
-	int joystick;
-	int mpubase;
-	int wssbase;
-	int cdrom;
-	int cdrombase;
-};
-
-static struct d_hcfg decoded_hcfg __initdata = {0, };
-
-#endif /* CONFIG_SC6600 */
-
-/* orVals contain the values to be or'ed       				*/
-struct orVals {
-	int	val;		/* irq|mirq|dma                         */
-	int	or;		/* soft_cfg |= TheStruct.or             */
-};
-
-/* aedsp16_info contain the audio card configuration                  */
-struct aedsp16_info {
-	int base_io;            /* base I/O address for accessing card  */
-	int irq;                /* irq value for DSP I/O                */
-	int mpu_irq;            /* irq for mpu401 interface I/O         */
-	int dma;                /* dma value for DSP I/O                */
-	int mss_base;           /* base I/O for Microsoft Sound System  */
-	int mpu_base;           /* base I/O for MPU-401 emulation       */
-	int init;               /* Initialization status of the card    */
-};
-
-/*
- * Magic values that the DSP will eat when configuring irq/mirq/dma
- */
-/* DSP IRQ conversion array             */
-static struct orVals orIRQ[] __initdata = {
-	{0x05, 0x28},
-	{0x07, 0x08},
-	{0x09, 0x10},
-	{0x0a, 0x18},
-	{0x0b, 0x20},
-	{0x00, 0x00}
-};
-
-/* MPU-401 IRQ conversion array         */
-static struct orVals orMIRQ[] __initdata = {
-	{0x05, 0x04},
-	{0x07, 0x44},
-	{0x09, 0x84},
-	{0x0a, 0xc4},
-	{0x00, 0x00}
-};
-
-/* DMA Channels conversion array        */
-static struct orVals orDMA[] __initdata = {
-	{0x00, 0x01},
-	{0x01, 0x02},
-	{0x03, 0x03},
-	{0x00, 0x00}
-};
-
-static struct aedsp16_info ae_config = {
-	.base_io = DEF_AEDSP16_IOB,
-	.irq = DEF_AEDSP16_IRQ,
-	.mpu_irq = DEF_AEDSP16_MRQ,
-	.dma = DEF_AEDSP16_DMA,
-	.mss_base = -1,
-	.mpu_base = -1,
-	.init = INIT_NONE
-};
-
-/*
- * Buffers to store audio card informations
- */
-static char     DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
-static char     DSPVersion[CARDVERLEN + 1] __initdata = {0, };
-
-static int __init aedsp16_wait_data(int port)
-{
-	int             loop = STATUSRETRY;
-	unsigned char   ret = 0;
-
-	DBG1(("aedsp16_wait_data (0x%x): ", port));
-
-	do {
-		  ret = inb(port + DSP_DATAVAIL);
-	/*
-	 * Wait for data available (bit 7 of ret == 1)
-	 */
-	  } while (!(ret & 0x80) && loop--);
-
-	if (ret & 0x80) {
-		DBG1(("success.\n"));
-		return TRUE;
-	}
-
-	DBG1(("failure.\n"));
-	return FALSE;
-}
-
-static int __init aedsp16_read(int port)
-{
-	int inbyte;
-
-	DBG(("    Read DSP Byte (0x%x): ", port));
-
-	if (aedsp16_wait_data(port) == FALSE) {
-		DBG(("failure.\n"));
-		return -1;
-	}
-
-	inbyte = inb(port + DSP_READ);
-
-	DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
-
-	return inbyte;
-}
-
-static int __init aedsp16_test_dsp(int port)
-{
-	return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
-}
-
-static int __init aedsp16_dsp_reset(int port)
-{
-	/*
-	 * Reset DSP
-	 */
-
-	DBG(("Reset DSP:\n"));
-
-	outb(1, (port + DSP_RESET));
-	udelay(10);
-	outb(0, (port + DSP_RESET));
-	udelay(10);
-	udelay(10);
-	if (aedsp16_test_dsp(port) == TRUE) {
-		DBG(("success.\n"));
-		return TRUE;
-	} else
-		DBG(("failure.\n"));
-	return FALSE;
-}
-
-static int __init aedsp16_write(int port, int cmd)
-{
-	unsigned char   ret;
-	int             loop = HARDRETRY;
-
-	DBG(("    Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
-
-	do {
-		ret = inb(port + DSP_STATUS);
-		/*
-		 * DSP ready to receive data if bit 7 of ret == 0
-		 */
-		if (!(ret & 0x80)) {
-			outb(cmd, port + DSP_COMMAND);
-			DBG(("success.\n"));
-			return 0;
-		}
-	} while (loop--);
-
-	DBG(("timeout.\n"));
-	printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
-
-	return -1;
-}
-
-#if defined(CONFIG_SC6600)
-
-#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
-void __init aedsp16_pinfo(void) {
-	DBG(("\n Base address:  %x\n", decoded_hcfg.iobase));
-	DBG((" Joystick    : %s present\n", decoded_hcfg.joystick?"":" not"));
-	DBG((" WSS addr    :  %x\n", decoded_hcfg.wssbase));
-	DBG((" MPU-401 addr:  %x\n", decoded_hcfg.mpubase));
-	DBG((" CDROM       : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
-	DBG((" CDROMADDR   :  %x\n\n", decoded_hcfg.cdrombase));
-}
-#endif
-
-static void __init aedsp16_hard_decode(void) {
-
-	DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
-
-/*
- * Decode Cfg Bytes.
- */
-	decoded_hcfg.iobase	= IOBASE(hard_cfg[0]);
-	decoded_hcfg.joystick	= JOY(hard_cfg[0]);
-	decoded_hcfg.wssbase	= WSSADDR(hard_cfg[0]);
-	decoded_hcfg.mpubase	= MPUADDR(hard_cfg[0]);
-	decoded_hcfg.cdrom	= CDROM(hard_cfg[1]);
-	decoded_hcfg.cdrombase	= CDROMADDR(hard_cfg[1]);
-
-#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
-	printk(" Original sound card configuration:\n");
-	aedsp16_pinfo();
-#endif
-
-/*
- * Now set up the real kernel configuration.
- */
-	decoded_hcfg.iobase	= ae_config.base_io;
-	decoded_hcfg.wssbase	= ae_config.mss_base;
-	decoded_hcfg.mpubase	= ae_config.mpu_base;
-
-#if defined(CONFIG_SC6600_JOY)
- 	decoded_hcfg.joystick	= CONFIG_SC6600_JOY; /* Enable */
-#endif
-#if defined(CONFIG_SC6600_CDROM)
-	decoded_hcfg.cdrom	= CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
-#endif
-#if defined(CONFIG_SC6600_CDROMBASE)
-	decoded_hcfg.cdrombase	= CONFIG_SC6600_CDROMBASE; /* 0 Disable */
-#endif
-
-#if defined(AEDSP16_DEBUG)
-	DBG((" New Values:\n"));
-	aedsp16_pinfo();
-#endif
-
-	DBG(("success.\n"));
-}
-
-static void __init aedsp16_hard_encode(void) {
-
-	DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
-
-	hard_cfg[0] = 0;
-	hard_cfg[1] = 0;
-
-	hard_cfg[0] |= 0x20;
-
-	BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
-	BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
-	BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
-	BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
-	BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
-	BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
-
-#if defined(AEDSP16_DEBUG)
-	aedsp16_pinfo();
-#endif
-
-	DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
-	DBG(("success.\n"));
-
-}
-
-static int __init aedsp16_hard_write(int port) {
-
-	DBG(("aedsp16_hard_write:\n"));
-
-	if (aedsp16_write(port, COMMAND_6C)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if (aedsp16_write(port, COMMAND_5C)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if (aedsp16_write(port, hard_cfg[0])) {
-		printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if (aedsp16_write(port, hard_cfg[1])) {
-		printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if (aedsp16_write(port, COMMAND_C5)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-
-	DBG(("success.\n"));
-
-	return TRUE;
-}
-
-static int __init aedsp16_hard_read(int port) {
-
-	DBG(("aedsp16_hard_read:\n"));
-
-	if (aedsp16_write(port, READ_HARD_CFG)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-
-	if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
-		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
-			READ_HARD_CFG);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
-		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
-			READ_HARD_CFG);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	if (aedsp16_read(port) == -1) {
-		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
-			READ_HARD_CFG);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-
-	DBG(("success.\n"));
-
-	return TRUE;
-}
-
-static int __init aedsp16_ext_cfg_write(int port) {
-
-	int extcfg, val;
-
-	if (aedsp16_write(port, COMMAND_66)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
-		return FALSE;
-	}
-
-	extcfg = 7;
-	if (decoded_hcfg.cdrom != 2)
-		extcfg = 0x0F;
-	if ((decoded_hcfg.cdrom == 4) ||
-	    (decoded_hcfg.cdrom == 3))
-		extcfg &= ~2;
-	if (decoded_hcfg.cdrombase == 0)
-		extcfg &= ~2;
-	if (decoded_hcfg.mpubase == 0)
-		extcfg &= ~1;
-
-	if (aedsp16_write(port, extcfg)) {
-		printk("[AEDSP16] Write extcfg: failed!\n");
-		return FALSE;
-	}
-	if (aedsp16_write(port, 0)) {
-		printk("[AEDSP16] Write extcfg: failed!\n");
-		return FALSE;
-	}
-	if (decoded_hcfg.cdrom == 3) {
-		if (aedsp16_write(port, COMMAND_52)) {
-			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
-			return FALSE;
-		}
-		if ((val = aedsp16_read(port)) == -1) {
-			printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
-					, COMMAND_52);
-			return FALSE;
-		}
-		val &= 0x7F;
-		if (aedsp16_write(port, COMMAND_60)) {
-			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
-			return FALSE;
-		}
-		if (aedsp16_write(port, val)) {
-			printk("[AEDSP16] Write val: failed!\n");
-			return FALSE;
-		}
-	}
-
-	return TRUE;
-}
-
-#endif /* CONFIG_SC6600 */
-
-static int __init aedsp16_cfg_write(int port) {
-	if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
-		return FALSE;
-	}
-	if (aedsp16_write(port, soft_cfg)) {
-		printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
-		return FALSE;
-	}
-	return TRUE;
-}
-
-static int __init aedsp16_init_mss(int port)
-{
-	DBG(("aedsp16_init_mss:\n"));
-
-	mdelay(10);
-
-	if (aedsp16_write(port, DSP_INIT_MSS)) {
-		printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
-				DSP_INIT_MSS);
-		DBG(("failure.\n"));
-		return FALSE;
-	}
-	
-	mdelay(10);
-
-	if (aedsp16_cfg_write(port) == FALSE)
-		return FALSE;
-
-	outb(soft_cfg_mss, ae_config.mss_base);
-
-	DBG(("success.\n"));
-
-	return TRUE;
-}
-
-static int __init aedsp16_setup_board(int port) {
-	int	loop = RETRY;
-
-#if defined(CONFIG_SC6600)
-	int	val = 0;
-
-	if (aedsp16_hard_read(port) == FALSE) {
-		printk("[AEDSP16] aedsp16_hard_read: failed!\n");
-		return FALSE;
-	}
-
-	if (aedsp16_write(port, COMMAND_52)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
-		return FALSE;
-	}
-
-	if ((val = aedsp16_read(port)) == -1) {
-		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
-				COMMAND_52);
-		return FALSE;
-	}
-#endif
-
-	do {
-		if (aedsp16_write(port, COMMAND_88)) {
-			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
-			return FALSE;
-		}
-		mdelay(10);
-	} while ((aedsp16_wait_data(port) == FALSE) && loop--);
-
-	if (aedsp16_read(port) == -1) {
-		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
-				COMMAND_88);
-		return FALSE;
-	}
-
-#if !defined(CONFIG_SC6600)
-	if (aedsp16_write(port, COMMAND_5C)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
-		return FALSE;
-	}
-#endif
-
-	if (aedsp16_cfg_write(port) == FALSE)
-		return FALSE;
-
-#if defined(CONFIG_SC6600)
-	if (aedsp16_write(port, COMMAND_60)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
-		return FALSE;
-	}
-	if (aedsp16_write(port, val)) {
-		printk("[AEDSP16] DATA 0x%x: failed!\n", val);
-		return FALSE;
-	}
-	if (aedsp16_write(port, COMMAND_6E)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
-		return FALSE;
-	}
-	if (aedsp16_write(port, ver[0])) {
-		printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
-		return FALSE;
-	}
-	if (aedsp16_write(port, ver[1])) {
-		printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
-		return FALSE;
-	}
-
-	if (aedsp16_hard_write(port) == FALSE) {
-		printk("[AEDSP16] aedsp16_hard_write: failed!\n");
-		return FALSE;
-	}
-
-	if (aedsp16_write(port, COMMAND_5C)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
-		return FALSE;
-	}
-
-#if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
-	if (aedsp16_cfg_write(port) == FALSE)
-		return FALSE;
-#endif
-
-#endif
-
-	return TRUE;
-}
-
-static int __init aedsp16_stdcfg(int port) {
-	if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
-		return FALSE;
-	}
-	/*
-	 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
-	 */
-	if (aedsp16_write(port, 0x0A)) {
-		printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
-		return FALSE;
-	}
-	return TRUE;
-}
-
-static int __init aedsp16_dsp_version(int port)
-{
-	int             len = 0;
-	int             ret;
-
-	DBG(("Get DSP Version:\n"));
-
-	if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
-		DBG(("failed.\n"));
-		return FALSE;
-	}
-
-	do {
-		if ((ret = aedsp16_read(port)) == -1) {
-			DBG(("failed.\n"));
-			return FALSE;
-		}
-	/*
-	 * We already know how many int are stored (2), so we know when the
-	 * string is finished.
-	 */
-		ver[len++] = ret;
-	  } while (len < CARDVERDIGITS);
-	sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
-
-	DBG(("success.\n"));
-
-	return TRUE;
-}
-
-static int __init aedsp16_dsp_copyright(int port)
-{
-	int             len = 0;
-	int             ret;
-
-	DBG(("Get DSP Copyright:\n"));
-
-	if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
-		printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
-		DBG(("failed.\n"));
-		return FALSE;
-	}
-
-	do {
-		if ((ret = aedsp16_read(port)) == -1) {
-	/*
-	 * If no more data available, return to the caller, no error if len>0.
-	 * We have no other way to know when the string is finished.
-	 */
-			if (len)
-				break;
-			else {
-				DBG(("failed.\n"));
-				return FALSE;
-			}
-		}
-
-		DSPCopyright[len++] = ret;
-
-	  } while (len < CARDNAMELEN);
-
-	DBG(("success.\n"));
-
-	return TRUE;
-}
-
-static void __init aedsp16_init_tables(void)
-{
-	int i = 0;
-
-	memset(DSPCopyright, 0, CARDNAMELEN + 1);
-	memset(DSPVersion, 0, CARDVERLEN + 1);
-
-	for (i = 0; orIRQ[i].or; i++)
-		if (orIRQ[i].val == ae_config.irq) {
-			soft_cfg |= orIRQ[i].or;
-			soft_cfg_mss |= orIRQ[i].or;
-		}
-
-	for (i = 0; orMIRQ[i].or; i++)
-		if (orMIRQ[i].or == ae_config.mpu_irq)
-			soft_cfg |= orMIRQ[i].or;
-
-	for (i = 0; orDMA[i].or; i++)
-		if (orDMA[i].val == ae_config.dma) {
-			soft_cfg |= orDMA[i].or;
-			soft_cfg_mss |= orDMA[i].or;
-		}
-}
-
-static int __init aedsp16_init_board(void)
-{
-	aedsp16_init_tables();
-
-	if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
-		return FALSE;
-	}
-	if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
-		return FALSE;
-	}
-
-	/*
-	 * My AEDSP16 card return SC-6000 in DSPCopyright, so
-	 * if we have something different, we have to be warned.
-	 */
-	if (strcmp("SC-6000", DSPCopyright))
-		printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
-
-	if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
-		return FALSE;
-	}
-
-	if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
-		return FALSE;
-	}
-
-#if defined(CONFIG_SC6600)
-	if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_hard_read: failed!\n");
-		return FALSE;
-	}
-
-	aedsp16_hard_decode();
-
-	aedsp16_hard_encode();
-
-	if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_hard_write: failed!\n");
-		return FALSE;
-	}
-
-	if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
-		return FALSE;
-	}
-#endif /* CONFIG_SC6600 */
-
-	if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
-		printk("[AEDSP16] aedsp16_setup_board: failed!\n");
-		return FALSE;
-	}
-
-	if (ae_config.mss_base != -1) {
-		if (ae_config.init & INIT_MSS) {
-			if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
-				printk("[AEDSP16] Can not initialize"
-				       "Microsoft Sound System mode.\n");
-				return FALSE;
-			}
-		}
-	}
-
-#if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
-
-	printk("Audio Excel DSP 16 init v%s (%s %s) [",
-		VERSION, DSPCopyright,
-		DSPVersion);
-
-	if (ae_config.mpu_base != -1) {
-		if (ae_config.init & INIT_MPU401) {
-			printk("MPU401");
-			if ((ae_config.init & INIT_MSS) ||
-			    (ae_config.init & INIT_SBPRO))
-				printk(" ");
-		}
-	}
-
-	if (ae_config.mss_base == -1) {
-		if (ae_config.init & INIT_SBPRO) {
-			printk("SBPro");
-			if (ae_config.init & INIT_MSS)
-				printk(" ");
-		}
-	}
-
-	if (ae_config.mss_base != -1)
-		if (ae_config.init & INIT_MSS)
-			printk("MSS");
-
-	printk("]\n");
-#endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
-
-	mdelay(10);
-
-	return TRUE;
-}
-
-static int __init init_aedsp16_sb(void)
-{
-	DBG(("init_aedsp16_sb: "));
-
-/*
- * If the card is already init'ed MSS, we can not init it to SBPRO too
- * because the board can not emulate simultaneously MSS and SBPRO.
- */
-	if (ae_config.init & INIT_MSS)
-		return FALSE;
-	if (ae_config.init & INIT_SBPRO)
-		return FALSE;
-
-	ae_config.init |= INIT_SBPRO;
-
-	DBG(("done.\n"));
-
-	return TRUE;
-}
-
-static void uninit_aedsp16_sb(void)
-{
-	DBG(("uninit_aedsp16_sb: "));
-
-	ae_config.init &= ~INIT_SBPRO;
-
-	DBG(("done.\n"));
-}
-
-static int __init init_aedsp16_mss(void)
-{
-	DBG(("init_aedsp16_mss: "));
-
-/*
- * If the card is already init'ed SBPRO, we can not init it to MSS too
- * because the board can not emulate simultaneously MSS and SBPRO.
- */
-	if (ae_config.init & INIT_SBPRO)
-		return FALSE;
-	if (ae_config.init & INIT_MSS)
-		return FALSE;
-/*
- * We must allocate the CONFIG_AEDSP16_BASE region too because these are the 
- * I/O ports to access card's control registers.
- */
-	if (!(ae_config.init & INIT_MPU401)) {
-		if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
-				"aedsp16 (base)")) {
-			printk(
-			"AEDSP16 BASE I/O port region is already in use.\n");
-			return FALSE;
-		}
-	}
-
-	ae_config.init |= INIT_MSS;
-
-	DBG(("done.\n"));
-
-	return TRUE;
-}
-
-static void uninit_aedsp16_mss(void)
-{
-	DBG(("uninit_aedsp16_mss: "));
-
-	if ((!(ae_config.init & INIT_MPU401)) &&
-	   (ae_config.init & INIT_MSS)) {
-		release_region(ae_config.base_io, IOBASE_REGION_SIZE);
-		DBG(("AEDSP16 base region released.\n"));
-	}
-
-	ae_config.init &= ~INIT_MSS;
-	DBG(("done.\n"));
-}
-
-static int __init init_aedsp16_mpu(void)
-{
-	DBG(("init_aedsp16_mpu: "));
-
-	if (ae_config.init & INIT_MPU401)
-		return FALSE;
-
-/*
- * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O 
- * ports to access card's control registers.
- */
-	if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
-		if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
-					"aedsp16 (base)")) {
-			printk(
-			"AEDSP16 BASE I/O port region is already in use.\n");
-			return FALSE;
-		}
-	}
-
-	ae_config.init |= INIT_MPU401;
-
-	DBG(("done.\n"));
-
-	return TRUE;
-}
-
-static void uninit_aedsp16_mpu(void)
-{
-	DBG(("uninit_aedsp16_mpu: "));
-
-	if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
-	   (ae_config.init & INIT_MPU401)) {
-		release_region(ae_config.base_io, IOBASE_REGION_SIZE);
-		DBG(("AEDSP16 base region released.\n"));
-	}
-
-	ae_config.init &= ~INIT_MPU401;
-
-	DBG(("done.\n"));
-}
-
-static int __init init_aedsp16(void)
-{
-	int initialized = FALSE;
-
-	DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
-	     ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
-
-	if (ae_config.mss_base == -1) {
-		if (init_aedsp16_sb() == FALSE) {
-			uninit_aedsp16_sb();
-		} else {
-			initialized = TRUE;
-		}
-	}
-
-	if (ae_config.mpu_base != -1) {
-		if (init_aedsp16_mpu() == FALSE) {
-			uninit_aedsp16_mpu();
-		} else {
-			initialized = TRUE;
-		}
-	}
-
-/*
- * In the sequence of init routines, the MSS init MUST be the last!
- * This because of the special register programming the MSS mode needs.
- * A board reset would disable the MSS mode restoring the default SBPRO
- * mode.
- */
-	if (ae_config.mss_base != -1) {
-		if (init_aedsp16_mss() == FALSE) {
-			uninit_aedsp16_mss();
-		} else {
-			initialized = TRUE;
-		}
-	}
-
-	if (initialized)
-		initialized = aedsp16_init_board();
-	return initialized;
-}
-
-static void __exit uninit_aedsp16(void)
-{
-	if (ae_config.mss_base != -1)
-		uninit_aedsp16_mss();
-	else
-		uninit_aedsp16_sb();
-	if (ae_config.mpu_base != -1)
-		uninit_aedsp16_mpu();
-}
-
-static int __initdata io = -1;
-static int __initdata irq = -1;
-static int __initdata dma = -1;
-static int __initdata mpu_irq = -1;
-static int __initdata mss_base = -1;
-static int __initdata mpu_base = -1;
-
-module_param_hw(io, int, ioport, 0);
-MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
-module_param_hw(irq, int, irq, 0);
-MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
-module_param_hw(dma, int, dma, 0);
-MODULE_PARM_DESC(dma, "dma line (0 1 3)");
-module_param_hw(mpu_irq, int, irq, 0);
-MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
-module_param_hw(mss_base, int, ioport, 0);
-MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
-module_param_hw(mpu_base, int, ioport, 0);
-MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
-MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
-MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
-MODULE_LICENSE("GPL");
-
-static int __init do_init_aedsp16(void) {
-	printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
-	if (io == -1 || dma == -1 || irq == -1) {
-		printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
-		return -EINVAL;
-	}
-
-	ae_config.base_io = io;
-	ae_config.irq = irq;
-	ae_config.dma = dma;
-
-	ae_config.mss_base = mss_base;
-	ae_config.mpu_base = mpu_base;
-	ae_config.mpu_irq = mpu_irq;
-
-	if (init_aedsp16() == FALSE) {
-		printk(KERN_ERR "aedsp16: initialization failed\n");
-		/*
-		 * XXX
-		 * What error should we return here ?
-		 */
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static void __exit cleanup_aedsp16(void) {
-	uninit_aedsp16();
-}
-
-module_init(do_init_aedsp16);
-module_exit(cleanup_aedsp16);
-
-#ifndef MODULE
-static int __init setup_aedsp16(char *str)
-{
-	/* io, irq, dma, mss_io, mpu_io, mpu_irq */
-	int ints[7];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	 = ints[1];
-	irq	 = ints[2];
-	dma	 = ints[3];
-	mss_base = ints[4];
-	mpu_base = ints[5];
-	mpu_irq	 = ints[6];
-	return 1;
-}
-
-__setup("aedsp16=", setup_aedsp16);
-#endif
diff --git a/sound/oss/audio.c b/sound/oss/audio.c
deleted file mode 100644
index 09c932f899b8..000000000000
--- a/sound/oss/audio.c
+++ /dev/null
@@ -1,985 +0,0 @@
-/*
- * sound/oss/audio.c
- *
- * Device file manager for /dev/audio
- */
-
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Thomas Sailer   : moved several static variables into struct audio_operations
- *                   (which is grossly misnamed btw.) because they have the same
- *                   lifetime as the rest in there and dynamic allocation saves
- *                   12k or so
- * Thomas Sailer   : use more logical O_NONBLOCK semantics
- * Daniel Rodriksson: reworked the use of the device specific copy_user
- *                    still generic
- * Horst von Brand:  Add missing #include <linux/string.h>
- * Chris Rankin    : Update the module-usage counter for the coprocessor,
- *                   and decrement the counters again if we cannot open
- *                   the audio device.
- */
-
-#include <linux/stddef.h>
-#include <linux/string.h>
-#include <linux/kmod.h>
-
-#include "sound_config.h"
-#include "ulaw.h"
-#include "coproc.h"
-
-#define NEUTRAL8	0x80
-#define NEUTRAL16	0x00
-
-
-static int             dma_ioctl(int dev, unsigned int cmd, void __user *arg);
-
-static int set_format(int dev, int fmt)
-{
-	if (fmt != AFMT_QUERY)
-	{
-		audio_devs[dev]->local_conversion = 0;
-
-		if (!(audio_devs[dev]->format_mask & fmt))	/* Not supported */
-		{
-			if (fmt == AFMT_MU_LAW)
-			{
-				fmt = AFMT_U8;
-				audio_devs[dev]->local_conversion = CNV_MU_LAW;
-			}
-			else
-				fmt = AFMT_U8;	/* This is always supported */
-		}
-		audio_devs[dev]->audio_format = audio_devs[dev]->d->set_bits(dev, fmt);
-		audio_devs[dev]->local_format = fmt;
-	}
-	else
-		return audio_devs[dev]->local_format;
-
-	if (audio_devs[dev]->local_conversion)
-		return audio_devs[dev]->local_conversion;
-	else 
-		return audio_devs[dev]->local_format;
-}
-
-int audio_open(int dev, struct file *file)
-{
-	int ret;
-	int bits;
-	int dev_type = dev & 0x0f;
-	int mode = translate_mode(file);
-	const struct audio_driver *driver;
-	const struct coproc_operations *coprocessor;
-
-	dev = dev >> 4;
-
-	if (dev_type == SND_DEV_DSP16)
-		bits = 16;
-	else
-		bits = 8;
-
-	if (dev < 0 || dev >= num_audiodevs)
-		return -ENXIO;
-
-	driver = audio_devs[dev]->d;
-
-	if (!try_module_get(driver->owner))
-		return -ENODEV;
-
-	if ((ret = DMAbuf_open(dev, mode)) < 0)
-		goto error_1;
-
-	if ( (coprocessor = audio_devs[dev]->coproc) != NULL ) {
-		if (!try_module_get(coprocessor->owner))
-			goto error_2;
-
-		if ((ret = coprocessor->open(coprocessor->devc, COPR_PCM)) < 0) {
-			printk(KERN_WARNING "Sound: Can't access coprocessor device\n");
-			goto error_3;
-		}
-	}
-	
-	audio_devs[dev]->local_conversion = 0;
-
-	if (dev_type == SND_DEV_AUDIO)
-		set_format(dev, AFMT_MU_LAW);
-	else 
-		set_format(dev, bits);
-
-	audio_devs[dev]->audio_mode = AM_NONE;
-
-	return 0;
-
-	/*
-	 * Clean-up stack: this is what needs (un)doing if
-	 * we can't open the audio device ...
-	 */
-	error_3:
-	module_put(coprocessor->owner);
-
-	error_2:
-	DMAbuf_release(dev, mode);
-
-	error_1:
-	module_put(driver->owner);
-
-	return ret;
-}
-
-static void sync_output(int dev)
-{
-	int             p, i;
-	int             l;
-	struct dma_buffparms *dmap = audio_devs[dev]->dmap_out;
-
-	if (dmap->fragment_size <= 0)
-		return;
-	dmap->flags |= DMA_POST;
-
-	/* Align the write pointer with fragment boundaries */
-	
-	if ((l = dmap->user_counter % dmap->fragment_size) > 0)
-	{
-		int len;
-		unsigned long offs = dmap->user_counter % dmap->bytes_in_use;
-
-		len = dmap->fragment_size - l;
-		memset(dmap->raw_buf + offs, dmap->neutral_byte, len);
-		DMAbuf_move_wrpointer(dev, len);
-	}
-	
-	/*
-	 * Clean all unused buffer fragments.
-	 */
-
-	p = dmap->qtail;
-	dmap->flags |= DMA_POST;
-
-	for (i = dmap->qlen + 1; i < dmap->nbufs; i++)
-	{
-		p = (p + 1) % dmap->nbufs;
-		if (((dmap->raw_buf + p * dmap->fragment_size) + dmap->fragment_size) >
-			(dmap->raw_buf + dmap->buffsize))
-				printk(KERN_ERR "audio: Buffer error 2\n");
-
-		memset(dmap->raw_buf + p * dmap->fragment_size,
-			dmap->neutral_byte,
-			dmap->fragment_size);
-	}
-
-	dmap->flags |= DMA_DIRTY;
-}
-
-void audio_release(int dev, struct file *file)
-{
-	const struct coproc_operations *coprocessor;
-	int mode = translate_mode(file);
-
-	dev = dev >> 4;
-
-	/*
-	 * We do this in DMAbuf_release(). Why are we doing it
-	 * here? Why don't we test the file mode before setting
-	 * both flags? DMAbuf_release() does.
-	 * ...pester...pester...pester...
-	 */
-	audio_devs[dev]->dmap_out->closing = 1;
-	audio_devs[dev]->dmap_in->closing = 1;
-
-	/*
-	 * We need to make sure we allocated the dmap_out buffer
-	 * before we go mucking around with it in sync_output().
-	 */
-	if (mode & OPEN_WRITE)
-		sync_output(dev);
-
-	if ( (coprocessor = audio_devs[dev]->coproc) != NULL ) {
-		coprocessor->close(coprocessor->devc, COPR_PCM);
-		module_put(coprocessor->owner);
-	}
-	DMAbuf_release(dev, mode);
-
-	module_put(audio_devs[dev]->d->owner);
-}
-
-static void translate_bytes(const unsigned char *table, unsigned char *buff, int n)
-{
-	unsigned long   i;
-
-	if (n <= 0)
-		return;
-
-	for (i = 0; i < n; ++i)
-		buff[i] = table[buff[i]];
-}
-
-int audio_write(int dev, struct file *file, const char __user *buf, int count)
-{
-	int c, p, l, buf_size, used, returned;
-	int err;
-	char *dma_buf;
-
-	dev = dev >> 4;
-
-	p = 0;
-	c = count;
-	
-	if(count < 0)
-		return -EINVAL;
-
-	if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-		return -EPERM;
-
-	if (audio_devs[dev]->flags & DMA_DUPLEX)
-		audio_devs[dev]->audio_mode |= AM_WRITE;
-	else
-		audio_devs[dev]->audio_mode = AM_WRITE;
-
-	if (!count)		/* Flush output */
-	{
-		  sync_output(dev);
-		  return 0;
-	}
-	
-	while (c)
-	{
-		if ((err = DMAbuf_getwrbuffer(dev, &dma_buf, &buf_size, !!(file->f_flags & O_NONBLOCK))) < 0)
-		{
-			    /* Handle nonblocking mode */
-			if ((file->f_flags & O_NONBLOCK) && err == -EAGAIN)
-				return p? p : -EAGAIN;	/* No more space. Return # of accepted bytes */
-			return err;
-		}
-		l = c;
-
-		if (l > buf_size)
-			l = buf_size;
-
-		returned = l;
-		used = l;
-		if (!audio_devs[dev]->d->copy_user)
-		{
-			if ((dma_buf + l) >
-				(audio_devs[dev]->dmap_out->raw_buf + audio_devs[dev]->dmap_out->buffsize))
-			{
-				printk(KERN_ERR "audio: Buffer error 3 (%lx,%d), (%lx, %d)\n", (long) dma_buf, l, (long) audio_devs[dev]->dmap_out->raw_buf, (int) audio_devs[dev]->dmap_out->buffsize);
-				return -EDOM;
-			}
-			if (dma_buf < audio_devs[dev]->dmap_out->raw_buf)
-			{
-				printk(KERN_ERR "audio: Buffer error 13 (%lx<%lx)\n", (long) dma_buf, (long) audio_devs[dev]->dmap_out->raw_buf);
-				return -EDOM;
-			}
-			if(copy_from_user(dma_buf, &(buf)[p], l))
-				return -EFAULT;
-		} 
-		else audio_devs[dev]->d->copy_user (dev,
-						dma_buf, 0,
-						buf, p,
-						c, buf_size,
-						&used, &returned,
-						l);
-		l = returned;
-
-		if (audio_devs[dev]->local_conversion & CNV_MU_LAW)
-		{
-			translate_bytes(ulaw_dsp, (unsigned char *) dma_buf, l);
-		}
-		c -= used;
-		p += used;
-		DMAbuf_move_wrpointer(dev, l);
-
-	}
-
-	return count;
-}
-
-int audio_read(int dev, struct file *file, char __user *buf, int count)
-{
-	int             c, p, l;
-	char           *dmabuf;
-	int             buf_no;
-
-	dev = dev >> 4;
-	p = 0;
-	c = count;
-
-	if (!(audio_devs[dev]->open_mode & OPEN_READ))
-		return -EPERM;
-
-	if ((audio_devs[dev]->audio_mode & AM_WRITE) && !(audio_devs[dev]->flags & DMA_DUPLEX))
-		sync_output(dev);
-
-	if (audio_devs[dev]->flags & DMA_DUPLEX)
-		audio_devs[dev]->audio_mode |= AM_READ;
-	else
-		audio_devs[dev]->audio_mode = AM_READ;
-
-	while(c)
-	{
-		if ((buf_no = DMAbuf_getrdbuffer(dev, &dmabuf, &l, !!(file->f_flags & O_NONBLOCK))) < 0)
-		{
-			/*
-			 *	Nonblocking mode handling. Return current # of bytes
-			 */
-
-			if (p > 0) 		/* Avoid throwing away data */
-				return p;	/* Return it instead */
-
-			if ((file->f_flags & O_NONBLOCK) && buf_no == -EAGAIN)
-				return -EAGAIN;
-
-			return buf_no;
-		}
-		if (l > c)
-			l = c;
-
-		/*
-		 * Insert any local processing here.
-		 */
-
-		if (audio_devs[dev]->local_conversion & CNV_MU_LAW)
-		{
-			translate_bytes(dsp_ulaw, (unsigned char *) dmabuf, l);
-		}
-		
-		{
-			char           *fixit = dmabuf;
-
-			if(copy_to_user(&(buf)[p], fixit, l))
-				return -EFAULT;
-		}
-
-		DMAbuf_rmchars(dev, buf_no, l);
-
-		p += l;
-		c -= l;
-	}
-
-	return count - c;
-}
-
-int audio_ioctl(int dev, struct file *file, unsigned int cmd, void __user *arg)
-{
-	int val, count;
-	unsigned long flags;
-	struct dma_buffparms *dmap;
-	int __user *p = arg;
-
-	dev = dev >> 4;
-
-	if (_IOC_TYPE(cmd) == 'C')	{
-		if (audio_devs[dev]->coproc)	/* Coprocessor ioctl */
-			return audio_devs[dev]->coproc->ioctl(audio_devs[dev]->coproc->devc, cmd, arg, 0);
-		/* else
-		        printk(KERN_DEBUG"/dev/dsp%d: No coprocessor for this device\n", dev); */
-		return -ENXIO;
-	}
-	else switch (cmd) 
-	{
-		case SNDCTL_DSP_SYNC:
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return 0;
-			if (audio_devs[dev]->dmap_out->fragment_size == 0)
-				return 0;
-			sync_output(dev);
-			DMAbuf_sync(dev);
-			DMAbuf_reset(dev);
-			return 0;
-
-		case SNDCTL_DSP_POST:
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return 0;
-			if (audio_devs[dev]->dmap_out->fragment_size == 0)
-				return 0;
-			audio_devs[dev]->dmap_out->flags |= DMA_POST | DMA_DIRTY;
-			sync_output(dev);
-			dma_ioctl(dev, SNDCTL_DSP_POST, NULL);
-			return 0;
-
-		case SNDCTL_DSP_RESET:
-			audio_devs[dev]->audio_mode = AM_NONE;
-			DMAbuf_reset(dev);
-			return 0;
-
-		case SNDCTL_DSP_GETFMTS:
-			val = audio_devs[dev]->format_mask | AFMT_MU_LAW;
-			break;
-	
-		case SNDCTL_DSP_SETFMT:
-			if (get_user(val, p))
-				return -EFAULT;
-			val = set_format(dev, val);
-			break;
-
-		case SNDCTL_DSP_GETISPACE:
-			if (!(audio_devs[dev]->open_mode & OPEN_READ))
-				return 0;
-  			if ((audio_devs[dev]->audio_mode & AM_WRITE) && !(audio_devs[dev]->flags & DMA_DUPLEX))
-  				return -EBUSY;
-			return dma_ioctl(dev, cmd, arg);
-
-		case SNDCTL_DSP_GETOSPACE:
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return -EPERM;
-  			if ((audio_devs[dev]->audio_mode & AM_READ) && !(audio_devs[dev]->flags & DMA_DUPLEX))
-  				return -EBUSY;
-			return dma_ioctl(dev, cmd, arg);
-		
-		case SNDCTL_DSP_NONBLOCK:
-			spin_lock(&file->f_lock);
-			file->f_flags |= O_NONBLOCK;
-			spin_unlock(&file->f_lock);
-			return 0;
-
-		case SNDCTL_DSP_GETCAPS:
-				val = 1 | DSP_CAP_MMAP;	/* Revision level of this ioctl() */
-				if (audio_devs[dev]->flags & DMA_DUPLEX &&
-					audio_devs[dev]->open_mode == OPEN_READWRITE)
-					val |= DSP_CAP_DUPLEX;
-				if (audio_devs[dev]->coproc)
-					val |= DSP_CAP_COPROC;
-				if (audio_devs[dev]->d->local_qlen)	/* Device has hidden buffers */
-					val |= DSP_CAP_BATCH;
-				if (audio_devs[dev]->d->trigger)	/* Supports SETTRIGGER */
-					val |= DSP_CAP_TRIGGER;
-				break;
-			
-		case SOUND_PCM_WRITE_RATE:
-			if (get_user(val, p))
-				return -EFAULT;
-			val = audio_devs[dev]->d->set_speed(dev, val);
-			break;
-
-		case SOUND_PCM_READ_RATE:
-			val = audio_devs[dev]->d->set_speed(dev, 0);
-			break;
-			
-		case SNDCTL_DSP_STEREO:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val > 1 || val < 0)
-				return -EINVAL;
-			val = audio_devs[dev]->d->set_channels(dev, val + 1) - 1;
-			break;
-
-		case SOUND_PCM_WRITE_CHANNELS:
-			if (get_user(val, p))
-				return -EFAULT;
-			val = audio_devs[dev]->d->set_channels(dev, val);
-			break;
-
-		case SOUND_PCM_READ_CHANNELS:
-			val = audio_devs[dev]->d->set_channels(dev, 0);
-			break;
-		
-		case SOUND_PCM_READ_BITS:
-			val = audio_devs[dev]->d->set_bits(dev, 0);
-			break;
-
-		case SNDCTL_DSP_SETDUPLEX:
-			if (audio_devs[dev]->open_mode != OPEN_READWRITE)
-				return -EPERM;
-			return (audio_devs[dev]->flags & DMA_DUPLEX) ? 0 : -EIO;
-
-		case SNDCTL_DSP_PROFILE:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (audio_devs[dev]->open_mode & OPEN_WRITE)
-				audio_devs[dev]->dmap_out->applic_profile = val;
-			if (audio_devs[dev]->open_mode & OPEN_READ)
-				audio_devs[dev]->dmap_in->applic_profile = val;
-			return 0;
-		
-		case SNDCTL_DSP_GETODELAY:
-			dmap = audio_devs[dev]->dmap_out;
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return -EINVAL;
-			if (!(dmap->flags & DMA_ALLOC_DONE))
-			{
-				val=0;
-				break;
-			}
-		
-			spin_lock_irqsave(&dmap->lock,flags);
-			/* Compute number of bytes that have been played */
-			count = DMAbuf_get_buffer_pointer (dev, dmap, DMODE_OUTPUT);
-			if (count < dmap->fragment_size && dmap->qhead != 0)
-				count += dmap->bytes_in_use;	/* Pointer wrap not handled yet */
-			count += dmap->byte_counter;
-		
-			/* Subtract current count from the number of bytes written by app */
-			count = dmap->user_counter - count;
-			if (count < 0)
-				count = 0;
-			spin_unlock_irqrestore(&dmap->lock,flags);
-			val = count;
-			break;
-		
-		default:
-			return dma_ioctl(dev, cmd, arg);
-	}
-	return put_user(val, p);
-}
-
-void audio_init_devices(void)
-{
-	/*
-	 * NOTE! This routine could be called several times during boot.
-	 */
-}
-
-void reorganize_buffers(int dev, struct dma_buffparms *dmap, int recording)
-{
-	/*
-	 * This routine breaks the physical device buffers to logical ones.
-	 */
-
-	struct audio_operations *dsp_dev = audio_devs[dev];
-
-	unsigned i, n;
-	unsigned sr, nc, sz, bsz;
-
-	sr = dsp_dev->d->set_speed(dev, 0);
-	nc = dsp_dev->d->set_channels(dev, 0);
-	sz = dsp_dev->d->set_bits(dev, 0);
-
-	if (sz == 8)
-		dmap->neutral_byte = NEUTRAL8;
-	else
-		dmap->neutral_byte = NEUTRAL16;
-
-	if (sr < 1 || nc < 1 || sz < 1)
-	{
-/*		printk(KERN_DEBUG "Warning: Invalid PCM parameters[%d] sr=%d, nc=%d, sz=%d\n", dev, sr, nc, sz);*/
-		sr = DSP_DEFAULT_SPEED;
-		nc = 1;
-		sz = 8;
-	}
-	
-	sz = sr * nc * sz;
-
-	sz /= 8;		/* #bits -> #bytes */
-	dmap->data_rate = sz;
-
-	if (!dmap->needs_reorg)
-		return;
-	dmap->needs_reorg = 0;
-
-	if (dmap->fragment_size == 0)
-	{	
-		/* Compute the fragment size using the default algorithm */
-
-		/*
-		 * Compute a buffer size for time not exceeding 1 second.
-		 * Usually this algorithm gives a buffer size for 0.5 to 1.0 seconds
-		 * of sound (using the current speed, sample size and #channels).
-		 */
-
-		bsz = dmap->buffsize;
-		while (bsz > sz)
-			bsz /= 2;
-
-		if (bsz == dmap->buffsize)
-			bsz /= 2;	/* Needs at least 2 buffers */
-
-		/*
-		 *    Split the computed fragment to smaller parts. After 3.5a9
-		 *      the default subdivision is 4 which should give better
-		 *      results when recording.
-		 */
-
-		if (dmap->subdivision == 0)	/* Not already set */
-		{
-			dmap->subdivision = 4;	/* Init to the default value */
-
-			if ((bsz / dmap->subdivision) > 4096)
-				dmap->subdivision *= 2;
-			if ((bsz / dmap->subdivision) < 4096)
-				dmap->subdivision = 1;
-		}
-		bsz /= dmap->subdivision;
-
-		if (bsz < 16)
-			bsz = 16;	/* Just a sanity check */
-
-		dmap->fragment_size = bsz;
-	}
-	else
-	{
-		/*
-		 * The process has specified the buffer size with SNDCTL_DSP_SETFRAGMENT or
-		 * the buffer size computation has already been done.
-		 */
-		if (dmap->fragment_size > (dmap->buffsize / 2))
-			dmap->fragment_size = (dmap->buffsize / 2);
-		bsz = dmap->fragment_size;
-	}
-
-	if (audio_devs[dev]->min_fragment)
-		if (bsz < (1 << audio_devs[dev]->min_fragment))
-			bsz = 1 << audio_devs[dev]->min_fragment;
-	if (audio_devs[dev]->max_fragment)
-		if (bsz > (1 << audio_devs[dev]->max_fragment))
-			bsz = 1 << audio_devs[dev]->max_fragment;
-	bsz &= ~0x07;		/* Force size which is multiple of 8 bytes */
-#ifdef OS_DMA_ALIGN_CHECK
-	OS_DMA_ALIGN_CHECK(bsz);
-#endif
-
-	n = dmap->buffsize / bsz;
-	if (n > MAX_SUB_BUFFERS)
-		n = MAX_SUB_BUFFERS;
-	if (n > dmap->max_fragments)
-		n = dmap->max_fragments;
-
-	if (n < 2)
-	{
-		n = 2;
-		bsz /= 2;
-	}
-	dmap->nbufs = n;
-	dmap->bytes_in_use = n * bsz;
-	dmap->fragment_size = bsz;
-	dmap->max_byte_counter = (dmap->data_rate * 60 * 60) +
-			dmap->bytes_in_use;	/* Approximately one hour */
-
-	if (dmap->raw_buf)
-	{
-		memset(dmap->raw_buf, dmap->neutral_byte, dmap->bytes_in_use);
-	}
-	
-	for (i = 0; i < dmap->nbufs; i++)
-	{
-		dmap->counts[i] = 0;
-	}
-
-	dmap->flags |= DMA_ALLOC_DONE | DMA_EMPTY;
-}
-
-static int dma_subdivide(int dev, struct dma_buffparms *dmap, int fact)
-{
-	if (fact == 0) 
-	{
-		fact = dmap->subdivision;
-		if (fact == 0)
-			fact = 1;
-		return fact;
-	}
-	if (dmap->subdivision != 0 || dmap->fragment_size)	/* Too late to change */
-		return -EINVAL;
-
-	if (fact > MAX_REALTIME_FACTOR)
-		return -EINVAL;
-
-	if (fact != 1 && fact != 2 && fact != 4 && fact != 8 && fact != 16)
-		return -EINVAL;
-
-	dmap->subdivision = fact;
-	return fact;
-}
-
-static int dma_set_fragment(int dev, struct dma_buffparms *dmap, int fact)
-{
-	int bytes, count;
-
-	if (fact == 0)
-		return -EIO;
-
-	if (dmap->subdivision != 0 ||
-	    dmap->fragment_size)	/* Too late to change */
-		return -EINVAL;
-
-	bytes = fact & 0xffff;
-	count = (fact >> 16) & 0x7fff;
-
-	if (count == 0)
-		count = MAX_SUB_BUFFERS;
-	else if (count < MAX_SUB_BUFFERS)
-		count++;
-
-	if (bytes < 4 || bytes > 17)	/* <16 || > 512k */
-		return -EINVAL;
-
-	if (count < 2)
-		return -EINVAL;
-
-	if (audio_devs[dev]->min_fragment > 0)
-		if (bytes < audio_devs[dev]->min_fragment)
-			bytes = audio_devs[dev]->min_fragment;
-
-	if (audio_devs[dev]->max_fragment > 0)
-		if (bytes > audio_devs[dev]->max_fragment)
-			bytes = audio_devs[dev]->max_fragment;
-
-#ifdef OS_DMA_MINBITS
-	if (bytes < OS_DMA_MINBITS)
-		bytes = OS_DMA_MINBITS;
-#endif
-
-	dmap->fragment_size = (1 << bytes);
-	dmap->max_fragments = count;
-
-	if (dmap->fragment_size > dmap->buffsize)
-		dmap->fragment_size = dmap->buffsize;
-
-	if (dmap->fragment_size == dmap->buffsize &&
-	    audio_devs[dev]->flags & DMA_AUTOMODE)
-		dmap->fragment_size /= 2;	/* Needs at least 2 buffers */
-
-	dmap->subdivision = 1;	/* Disable SNDCTL_DSP_SUBDIVIDE */
-	return bytes | ((count - 1) << 16);
-}
-
-static int dma_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	struct dma_buffparms *dmap_out = audio_devs[dev]->dmap_out;
-	struct dma_buffparms *dmap_in = audio_devs[dev]->dmap_in;
-	struct dma_buffparms *dmap;
-	audio_buf_info info;
-	count_info cinfo;
-	int fact, ret, changed, bits, count, err;
-	unsigned long flags;
-
-	switch (cmd) 
-	{
-		case SNDCTL_DSP_SUBDIVIDE:
-			ret = 0;
-			if (get_user(fact, (int __user *)arg))
-				return -EFAULT;
-			if (audio_devs[dev]->open_mode & OPEN_WRITE)
-				ret = dma_subdivide(dev, dmap_out, fact);
-			if (ret < 0)
-				return ret;
-			if (audio_devs[dev]->open_mode != OPEN_WRITE ||
-				(audio_devs[dev]->flags & DMA_DUPLEX &&
-					audio_devs[dev]->open_mode & OPEN_READ))
-				ret = dma_subdivide(dev, dmap_in, fact);
-			if (ret < 0)
-				return ret;
-			break;
-
-		case SNDCTL_DSP_GETISPACE:
-		case SNDCTL_DSP_GETOSPACE:
-			dmap = dmap_out;
-			if (cmd == SNDCTL_DSP_GETISPACE && !(audio_devs[dev]->open_mode & OPEN_READ))
-				return -EINVAL;
-			if (cmd == SNDCTL_DSP_GETOSPACE && !(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return -EINVAL;
-			if (cmd == SNDCTL_DSP_GETISPACE && audio_devs[dev]->flags & DMA_DUPLEX)
-				dmap = dmap_in;
-			if (dmap->mapping_flags & DMA_MAP_MAPPED)
-				return -EINVAL;
-			if (!(dmap->flags & DMA_ALLOC_DONE))
-				reorganize_buffers(dev, dmap, (cmd == SNDCTL_DSP_GETISPACE));
-			info.fragstotal = dmap->nbufs;
-			if (cmd == SNDCTL_DSP_GETISPACE)
-				info.fragments = dmap->qlen;
-			else 
-			{
-				if (!DMAbuf_space_in_queue(dev))
-					info.fragments = 0;
-				else
-				{
-					info.fragments = DMAbuf_space_in_queue(dev);
-					if (audio_devs[dev]->d->local_qlen) 
-					{
-						int tmp = audio_devs[dev]->d->local_qlen(dev);
-						if (tmp && info.fragments)
-							tmp--;	/*
-								 * This buffer has been counted twice
-								 */
-						info.fragments -= tmp;
-					}
-				}
-			}
-			if (info.fragments < 0)
-				info.fragments = 0;
-			else if (info.fragments > dmap->nbufs)
-				info.fragments = dmap->nbufs;
-
-			info.fragsize = dmap->fragment_size;
-			info.bytes = info.fragments * dmap->fragment_size;
-
-			if (cmd == SNDCTL_DSP_GETISPACE && dmap->qlen)
-				info.bytes -= dmap->counts[dmap->qhead];
-			else 
-			{
-				info.fragments = info.bytes / dmap->fragment_size;
-				info.bytes -= dmap->user_counter % dmap->fragment_size;
-			}
-			if (copy_to_user(arg, &info, sizeof(info)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_DSP_SETTRIGGER:
-			if (get_user(bits, (int __user *)arg))
-				return -EFAULT;
-			bits &= audio_devs[dev]->open_mode;
-			if (audio_devs[dev]->d->trigger == NULL)
-				return -EINVAL;
-			if (!(audio_devs[dev]->flags & DMA_DUPLEX) && (bits & PCM_ENABLE_INPUT) &&
-				(bits & PCM_ENABLE_OUTPUT))
-				return -EINVAL;
-
-			if (bits & PCM_ENABLE_INPUT)
-			{
-				spin_lock_irqsave(&dmap_in->lock,flags);
-				changed = (audio_devs[dev]->enable_bits ^ bits) & PCM_ENABLE_INPUT;
-				if (changed && audio_devs[dev]->go) 
-				{
-					reorganize_buffers(dev, dmap_in, 1);
-					if ((err = audio_devs[dev]->d->prepare_for_input(dev,
-						     dmap_in->fragment_size, dmap_in->nbufs)) < 0) {
-						spin_unlock_irqrestore(&dmap_in->lock,flags);
-						return err;
-					}
-					dmap_in->dma_mode = DMODE_INPUT;
-					audio_devs[dev]->enable_bits |= PCM_ENABLE_INPUT;
-					DMAbuf_activate_recording(dev, dmap_in);
-				} else
-					audio_devs[dev]->enable_bits &= ~PCM_ENABLE_INPUT;
-				spin_unlock_irqrestore(&dmap_in->lock,flags);
-			}
-			if (bits & PCM_ENABLE_OUTPUT)
-			{
-				spin_lock_irqsave(&dmap_out->lock,flags);
-				changed = (audio_devs[dev]->enable_bits ^ bits) & PCM_ENABLE_OUTPUT;
-				if (changed &&
-				    (dmap_out->mapping_flags & DMA_MAP_MAPPED || dmap_out->qlen > 0) &&
-				    audio_devs[dev]->go) 
-				{
-					if (!(dmap_out->flags & DMA_ALLOC_DONE))
-						reorganize_buffers(dev, dmap_out, 0);
-					dmap_out->dma_mode = DMODE_OUTPUT;
-					audio_devs[dev]->enable_bits |= PCM_ENABLE_OUTPUT;
-					dmap_out->counts[dmap_out->qhead] = dmap_out->fragment_size;
-					DMAbuf_launch_output(dev, dmap_out);
-				} else
-					audio_devs[dev]->enable_bits &= ~PCM_ENABLE_OUTPUT;
-				spin_unlock_irqrestore(&dmap_out->lock,flags);
-			}
-#if 0
-			if (changed && audio_devs[dev]->d->trigger)
-				audio_devs[dev]->d->trigger(dev, bits * audio_devs[dev]->go);
-#endif				
-			/* Falls through... */
-
-		case SNDCTL_DSP_GETTRIGGER:
-			ret = audio_devs[dev]->enable_bits;
-			break;
-
-		case SNDCTL_DSP_SETSYNCRO:
-			if (!audio_devs[dev]->d->trigger)
-				return -EINVAL;
-			audio_devs[dev]->d->trigger(dev, 0);
-			audio_devs[dev]->go = 0;
-			return 0;
-
-		case SNDCTL_DSP_GETIPTR:
-			if (!(audio_devs[dev]->open_mode & OPEN_READ))
-				return -EINVAL;
-			spin_lock_irqsave(&dmap_in->lock,flags);
-			cinfo.bytes = dmap_in->byte_counter;
-			cinfo.ptr = DMAbuf_get_buffer_pointer(dev, dmap_in, DMODE_INPUT) & ~3;
-			if (cinfo.ptr < dmap_in->fragment_size && dmap_in->qtail != 0)
-				cinfo.bytes += dmap_in->bytes_in_use;	/* Pointer wrap not handled yet */
-			cinfo.blocks = dmap_in->qlen;
-			cinfo.bytes += cinfo.ptr;
-			if (dmap_in->mapping_flags & DMA_MAP_MAPPED)
-				dmap_in->qlen = 0;	/* Reset interrupt counter */
-			spin_unlock_irqrestore(&dmap_in->lock,flags);
-			if (copy_to_user(arg, &cinfo, sizeof(cinfo)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_DSP_GETOPTR:
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return -EINVAL;
-
-			spin_lock_irqsave(&dmap_out->lock,flags);
-			cinfo.bytes = dmap_out->byte_counter;
-			cinfo.ptr = DMAbuf_get_buffer_pointer(dev, dmap_out, DMODE_OUTPUT) & ~3;
-			if (cinfo.ptr < dmap_out->fragment_size && dmap_out->qhead != 0)
-				cinfo.bytes += dmap_out->bytes_in_use;	/* Pointer wrap not handled yet */
-			cinfo.blocks = dmap_out->qlen;
-			cinfo.bytes += cinfo.ptr;
-			if (dmap_out->mapping_flags & DMA_MAP_MAPPED)
-				dmap_out->qlen = 0;	/* Reset interrupt counter */
-			spin_unlock_irqrestore(&dmap_out->lock,flags);
-			if (copy_to_user(arg, &cinfo, sizeof(cinfo)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_DSP_GETODELAY:
-			if (!(audio_devs[dev]->open_mode & OPEN_WRITE))
-				return -EINVAL;
-			if (!(dmap_out->flags & DMA_ALLOC_DONE))
-			{
-				ret=0;
-				break;
-			}
-			spin_lock_irqsave(&dmap_out->lock,flags);
-			/* Compute number of bytes that have been played */
-			count = DMAbuf_get_buffer_pointer (dev, dmap_out, DMODE_OUTPUT);
-			if (count < dmap_out->fragment_size && dmap_out->qhead != 0)
-				count += dmap_out->bytes_in_use;	/* Pointer wrap not handled yet */
-			count += dmap_out->byte_counter;
-			/* Subtract current count from the number of bytes written by app */
-			count = dmap_out->user_counter - count;
-			if (count < 0)
-				count = 0;
-			spin_unlock_irqrestore(&dmap_out->lock,flags);
-			ret = count;
-			break;
-
-		case SNDCTL_DSP_POST:
-			if (audio_devs[dev]->dmap_out->qlen > 0)
-				if (!(audio_devs[dev]->dmap_out->flags & DMA_ACTIVE))
-					DMAbuf_launch_output(dev, audio_devs[dev]->dmap_out);
-			return 0;
-
-		case SNDCTL_DSP_GETBLKSIZE:
-			dmap = dmap_out;
-			if (audio_devs[dev]->open_mode & OPEN_WRITE)
-				reorganize_buffers(dev, dmap_out, (audio_devs[dev]->open_mode == OPEN_READ));
-			if (audio_devs[dev]->open_mode == OPEN_READ ||
-			    (audio_devs[dev]->flags & DMA_DUPLEX &&
-			     audio_devs[dev]->open_mode & OPEN_READ))
-				reorganize_buffers(dev, dmap_in, (audio_devs[dev]->open_mode == OPEN_READ));
-			if (audio_devs[dev]->open_mode == OPEN_READ)
-				dmap = dmap_in;
-			ret = dmap->fragment_size;
-			break;
-
-		case SNDCTL_DSP_SETFRAGMENT:
-			ret = 0;
-			if (get_user(fact, (int __user *)arg))
-				return -EFAULT;
-			if (audio_devs[dev]->open_mode & OPEN_WRITE)
-				ret = dma_set_fragment(dev, dmap_out, fact);
-			if (ret < 0)
-				return ret;
-			if (audio_devs[dev]->open_mode == OPEN_READ ||
-			    (audio_devs[dev]->flags & DMA_DUPLEX &&
-			     audio_devs[dev]->open_mode & OPEN_READ))
-				ret = dma_set_fragment(dev, dmap_in, fact);
-			if (ret < 0)
-				return ret;
-			if (!arg) /* don't know what this is good for, but preserve old semantics */
-				return 0;
-			break;
-
-		default:
-			if (!audio_devs[dev]->d->ioctl)
-				return -EINVAL;
-			return audio_devs[dev]->d->ioctl(dev, cmd, arg);
-	}
-	return put_user(ret, (int __user *)arg);
-}
diff --git a/sound/oss/bin2hex.c b/sound/oss/bin2hex.c
deleted file mode 100644
index b59109eb0db4..000000000000
--- a/sound/oss/bin2hex.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-int main( int argc, const char * argv [] )
-{
-    const char * varname;
-    int i = 0;
-    int c;
-    int id = 0;
-
-    if(argv[1] && strcmp(argv[1],"-i")==0)
-    {
-    	argv++;
-    	argc--;
-    	id=1;
-    }
-    	
-    if(argc==1)
-    {
-    	fprintf(stderr, "bin2hex: [-i] firmware\n");
-    	exit(1);
-    }
-    
-    varname = argv[1];
-    printf( "/* automatically generated by bin2hex */\n" );
-    printf( "static unsigned char %s [] %s =\n{\n", varname , id?"__initdata":"");
-
-    while ( ( c = getchar( ) ) != EOF )
-    {
-	if ( i != 0 && i % 10 == 0 )
-	    printf( "\n" );
-	printf( "0x%02lx,", c & 0xFFl );
-	i++;
-    }
-
-    printf( "};\nstatic int %sLen =  %d;\n", varname, i );
-    return 0;
-}
diff --git a/sound/oss/coproc.h b/sound/oss/coproc.h
deleted file mode 100644
index 7bec21bbdd88..000000000000
--- a/sound/oss/coproc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Definitions for various on board processors on the sound cards. For
- * example DSP processors.
- */
-
-/*
- * Coprocessor access types
- */
-#define COPR_CUSTOM		0x0001	/* Custom applications */
-#define COPR_MIDI		0x0002	/* MIDI (MPU-401) emulation */
-#define COPR_PCM		0x0004	/* Digitized voice applications */
-#define COPR_SYNTH		0x0008	/* Music synthesis */
diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c
deleted file mode 100644
index 6dad51596b70..000000000000
--- a/sound/oss/dev_table.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * sound/oss/dev_table.c
- *
- * Device call tables.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-#include <linux/init.h>
-
-#include "sound_config.h"
-
-struct audio_operations *audio_devs[MAX_AUDIO_DEV];
-EXPORT_SYMBOL(audio_devs);
-
-int num_audiodevs;
-EXPORT_SYMBOL(num_audiodevs);
-
-struct mixer_operations *mixer_devs[MAX_MIXER_DEV];
-EXPORT_SYMBOL(mixer_devs);
-
-int num_mixers;
-EXPORT_SYMBOL(num_mixers);
-
-struct synth_operations *synth_devs[MAX_SYNTH_DEV+MAX_MIDI_DEV];
-EXPORT_SYMBOL(synth_devs);
-
-int num_synths;
-
-struct midi_operations *midi_devs[MAX_MIDI_DEV];
-EXPORT_SYMBOL(midi_devs);
-
-int num_midis;
-EXPORT_SYMBOL(num_midis);
-
-struct sound_timer_operations *sound_timer_devs[MAX_TIMER_DEV] = {
-	&default_sound_timer, NULL
-};
-EXPORT_SYMBOL(sound_timer_devs);
-
-int num_sound_timers = 1;
-
-
-static int sound_alloc_audiodev(void);
-
-int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
-			int driver_size, int flags, unsigned int format_mask,
-			void *devc, int dma1, int dma2)
-{
-	struct audio_driver *d;
-	struct audio_operations *op;
-	int num;
-
-	if (vers != AUDIO_DRIVER_VERSION || driver_size > sizeof(struct audio_driver)) {
-		printk(KERN_ERR "Sound: Incompatible audio driver for %s\n", name);
-		return -EINVAL;
-	}
-	num = sound_alloc_audiodev();
-
-	if (num == -1) {
-		printk(KERN_ERR "sound: Too many audio drivers\n");
-		return -EBUSY;
-	}
-	d = (struct audio_driver *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_driver)));
-	sound_nblocks++;
-	if (sound_nblocks >= MAX_MEM_BLOCKS)
-		sound_nblocks = MAX_MEM_BLOCKS - 1;
-
-	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations)));
-	sound_nblocks++;
-	if (sound_nblocks >= MAX_MEM_BLOCKS)
-		sound_nblocks = MAX_MEM_BLOCKS - 1;
-
-	if (d == NULL || op == NULL) {
-		printk(KERN_ERR "Sound: Can't allocate driver for (%s)\n", name);
-		sound_unload_audiodev(num);
-		return -ENOMEM;
-	}
-	init_waitqueue_head(&op->in_sleeper);
-	init_waitqueue_head(&op->out_sleeper);	
-	init_waitqueue_head(&op->poll_sleeper);
-	if (driver_size < sizeof(struct audio_driver))
-		memset((char *) d, 0, sizeof(struct audio_driver));
-
-	memcpy((char *) d, (char *) driver, driver_size);
-
-	op->d = d;
-	strlcpy(op->name, name, sizeof(op->name));
-	op->flags = flags;
-	op->format_mask = format_mask;
-	op->devc = devc;
-
-	/*
-	 *    Hardcoded defaults
-	 */
-	audio_devs[num] = op;
-
-	DMAbuf_init(num, dma1, dma2);
-
-	audio_init_devices();
-	return num;
-}
-EXPORT_SYMBOL(sound_install_audiodrv);
-
-int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
-	int driver_size, void *devc)
-{
-	struct mixer_operations *op;
-
-	int n = sound_alloc_mixerdev();
-
-	if (n == -1) {
-		printk(KERN_ERR "Sound: Too many mixer drivers\n");
-		return -EBUSY;
-	}
-	if (vers != MIXER_DRIVER_VERSION ||
-		driver_size > sizeof(struct mixer_operations)) {
-		printk(KERN_ERR "Sound: Incompatible mixer driver for %s\n", name);
-		return -EINVAL;
-	}
-	
-	/* FIXME: This leaks a mixer_operations struct every time its called
-	   until you unload sound! */
-	   
-	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations)));
-	sound_nblocks++;
-	if (sound_nblocks >= MAX_MEM_BLOCKS)
-		sound_nblocks = MAX_MEM_BLOCKS - 1;
-
-	if (op == NULL) {
-		printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
-		return -ENOMEM;
-	}
-	memcpy((char *) op, (char *) driver, driver_size);
-
-	strlcpy(op->name, name, sizeof(op->name));
-	op->devc = devc;
-
-	mixer_devs[n] = op;
-	return n;
-}
-EXPORT_SYMBOL(sound_install_mixer);
-
-void sound_unload_audiodev(int dev)
-{
-	if (dev != -1) {
-		DMAbuf_deinit(dev);
-		audio_devs[dev] = NULL;
-		unregister_sound_dsp((dev<<4)+3);
-	}
-}
-EXPORT_SYMBOL(sound_unload_audiodev);
-
-static int sound_alloc_audiodev(void)
-{ 
-	int i = register_sound_dsp(&oss_sound_fops, -1);
-	if(i==-1)
-		return i;
-	i>>=4;
-	if(i>=num_audiodevs)
-		num_audiodevs = i + 1;
-	return i;
-}
-
-int sound_alloc_mididev(void)
-{
-	int i = register_sound_midi(&oss_sound_fops, -1);
-	if(i==-1)
-		return i;
-	i>>=4;
-	if(i>=num_midis)
-		num_midis = i + 1;
-	return i;
-}
-EXPORT_SYMBOL(sound_alloc_mididev);
-
-int sound_alloc_synthdev(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_SYNTH_DEV; i++) {
-		if (synth_devs[i] == NULL) {
-			if (i >= num_synths)
-				num_synths++;
-			return i;
-		}
-	}
-	return -1;
-}
-EXPORT_SYMBOL(sound_alloc_synthdev);
-
-int sound_alloc_mixerdev(void)
-{
-	int i = register_sound_mixer(&oss_sound_fops, -1);
-	if(i==-1)
-		return -1;
-	i>>=4;
-	if(i>=num_mixers)
-		num_mixers = i + 1;
-	return i;
-}
-EXPORT_SYMBOL(sound_alloc_mixerdev);
-
-int sound_alloc_timerdev(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_TIMER_DEV; i++) {
-		if (sound_timer_devs[i] == NULL) {
-			if (i >= num_sound_timers)
-				num_sound_timers++;
-			return i;
-		}
-	}
-	return -1;
-}
-EXPORT_SYMBOL(sound_alloc_timerdev);
-
-void sound_unload_mixerdev(int dev)
-{
-	if (dev != -1) {
-		mixer_devs[dev] = NULL;
-		unregister_sound_mixer(dev<<4);
-		num_mixers--;
-	}
-}
-EXPORT_SYMBOL(sound_unload_mixerdev);
-
-void sound_unload_mididev(int dev)
-{
-	if (dev != -1) {
-		midi_devs[dev] = NULL;
-		unregister_sound_midi((dev<<4)+2);
-	}
-}
-EXPORT_SYMBOL(sound_unload_mididev);
-
-void sound_unload_synthdev(int dev)
-{
-	if (dev != -1)
-		synth_devs[dev] = NULL;
-}
-EXPORT_SYMBOL(sound_unload_synthdev);
-
-void sound_unload_timerdev(int dev)
-{
-	if (dev != -1)
-		sound_timer_devs[dev] = NULL;
-}
-EXPORT_SYMBOL(sound_unload_timerdev);
-
diff --git a/sound/oss/dev_table.h b/sound/oss/dev_table.h
deleted file mode 100644
index 0199a317c5a9..000000000000
--- a/sound/oss/dev_table.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- *	dev_table.h
- *
- *	Global definitions for device call tables
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-#ifndef _DEV_TABLE_H_
-#define _DEV_TABLE_H_
-
-#include <linux/spinlock.h>
-/*
- * Sound card numbers 27 to 999. (1 to 26 are defined in soundcard.h)
- * Numbers 1000 to N are reserved for driver's internal use.
- */
-
-#define SNDCARD_DESKPROXL		27	/* Compaq Deskpro XL */
-#define SNDCARD_VIDC			28	/* ARMs VIDC */
-#define SNDCARD_SBPNP			29
-#define SNDCARD_SOFTOSS			36
-#define SNDCARD_VMIDI			37
-#define SNDCARD_OPL3SA1			38	/* Note: clash in msnd.h */
-#define SNDCARD_OPL3SA1_SB		39
-#define SNDCARD_OPL3SA1_MPU		40
-#define SNDCARD_WAVEFRONT               41
-#define SNDCARD_OPL3SA2                 42
-#define SNDCARD_OPL3SA2_MPU             43
-#define SNDCARD_WAVEARTIST              44	/* Waveartist */
-#define SNDCARD_OPL3SA2_MSS             45	/* Originally missed */
-#define SNDCARD_AD1816                  88
-
-/*
- *	NOTE! 	NOTE!	NOTE!	NOTE!
- *
- *	If you modify this file, please check the dev_table.c also.
- *
- *	NOTE! 	NOTE!	NOTE!	NOTE!
- */
-
-struct driver_info 
-{
-	char *driver_id;
-	int card_subtype;	/* Driver specific. Usually 0 */
-	int card_type;		/*	From soundcard.h	*/
-	char *name;
-	void (*attach) (struct address_info *hw_config);
-	int (*probe) (struct address_info *hw_config);
-	void (*unload) (struct address_info *hw_config);
-};
-
-struct card_info 
-{
-	int card_type;	/* Link (search key) to the driver list */
-	struct address_info config;
-	int enabled;
-	void *for_driver_use;
-};
-
-
-/*
- * Device specific parameters (used only by dmabuf.c)
- */
-#define MAX_SUB_BUFFERS		(32*MAX_REALTIME_FACTOR)
-
-#define DMODE_NONE		0
-#define DMODE_OUTPUT		PCM_ENABLE_OUTPUT
-#define DMODE_INPUT		PCM_ENABLE_INPUT
-
-struct dma_buffparms 
-{
-	int      dma_mode;	/* DMODE_INPUT, DMODE_OUTPUT or DMODE_NONE */
-	int	 closing;
-
-	/*
- 	 * Pointers to raw buffers
- 	 */
-
-  	char     *raw_buf;
-    	unsigned long   raw_buf_phys;
-	int buffsize;
-
-     	/*
-         * Device state tables
-         */
-
-	unsigned long flags;
-#define DMA_BUSY	0x00000001
-#define DMA_RESTART	0x00000002
-#define DMA_ACTIVE	0x00000004
-#define DMA_STARTED	0x00000008
-#define DMA_EMPTY	0x00000010	
-#define DMA_ALLOC_DONE	0x00000020
-#define DMA_SYNCING	0x00000040
-#define DMA_DIRTY	0x00000080
-#define DMA_POST	0x00000100
-#define DMA_NODMA	0x00000200
-#define DMA_NOTIMEOUT	0x00000400
-
-	int      open_mode;
-
-	/*
-	 * Queue parameters.
-	 */
-	int      qlen;
-	int      qhead;
-	int      qtail;
-	spinlock_t lock;
-		
-	int	 cfrag;	/* Current incomplete fragment (write) */
-
-	int      nbufs;
-	int      counts[MAX_SUB_BUFFERS];
-	int      subdivision;
-
-	int      fragment_size;
-        int	 needs_reorg;
-	int	 max_fragments;
-
-	int	 bytes_in_use;
-
-	int	 underrun_count;
-	unsigned long	 byte_counter;
-	unsigned long	 user_counter;
-	unsigned long	 max_byte_counter;
-	int	 data_rate; /* Bytes/second */
-
-	int	 mapping_flags;
-#define			DMA_MAP_MAPPED		0x00000001
-	char	neutral_byte;
-	int	dma;		/* DMA channel */
-
-	int     applic_profile;	/* Application profile (APF_*) */
-	/* Interrupt callback stuff */
-	void (*audio_callback) (int dev, int parm);
-	int callback_parm;
-
-	int	 buf_flags[MAX_SUB_BUFFERS];
-#define		 BUFF_EOF		0x00000001 /* Increment eof count */
-#define		 BUFF_DIRTY		0x00000002 /* Buffer written */
-};
-
-/*
- * Structure for use with various microcontrollers and DSP processors 
- * in the recent sound cards.
- */
-typedef struct coproc_operations 
-{
-	char name[64];
-	struct module *owner;
-	int (*open) (void *devc, int sub_device);
-	void (*close) (void *devc, int sub_device);
-	int (*ioctl) (void *devc, unsigned int cmd, void __user * arg, int local);
-	void (*reset) (void *devc);
-
-	void *devc;		/* Driver specific info */
-} coproc_operations;
-
-struct audio_driver 
-{
-	struct module *owner;
-	int (*open) (int dev, int mode);
-	void (*close) (int dev);
-	void (*output_block) (int dev, unsigned long buf, 
-			      int count, int intrflag);
-	void (*start_input) (int dev, unsigned long buf, 
-			     int count, int intrflag);
-	int (*ioctl) (int dev, unsigned int cmd, void __user * arg);
-	int (*prepare_for_input) (int dev, int bufsize, int nbufs);
-	int (*prepare_for_output) (int dev, int bufsize, int nbufs);
-	void (*halt_io) (int dev);
-	int (*local_qlen)(int dev);
-	void (*copy_user) (int dev,
-			char *localbuf, int localoffs,
-                        const char __user *userbuf, int useroffs,
-                        int max_in, int max_out,
-                        int *used, int *returned,
-                        int len);
-	void (*halt_input) (int dev);
-	void (*halt_output) (int dev);
-	void (*trigger) (int dev, int bits);
-	int (*set_speed)(int dev, int speed);
-	unsigned int (*set_bits)(int dev, unsigned int bits);
-	short (*set_channels)(int dev, short channels);
-	void (*postprocess_write)(int dev); 	/* Device spesific postprocessing for written data */
-	void (*preprocess_read)(int dev); 	/* Device spesific preprocessing for read data */
-	void (*mmap)(int dev);
-};
-
-struct audio_operations 
-{
-        char name[128];
-	int flags;
-#define NOTHING_SPECIAL 	0x00
-#define NEEDS_RESTART		0x01
-#define DMA_AUTOMODE		0x02
-#define DMA_DUPLEX		0x04
-#define DMA_PSEUDO_AUTOMODE	0x08
-#define DMA_HARDSTOP		0x10
-#define DMA_EXACT		0x40
-#define DMA_NORESET		0x80
-	int  format_mask;	/* Bitmask for supported audio formats */
-	void *devc;		/* Driver specific info */
-	struct audio_driver *d;
-	void *portc;		/* Driver specific info */
-	struct dma_buffparms *dmap_in, *dmap_out;
-	struct coproc_operations *coproc;
-	int mixer_dev;
-	int enable_bits;
- 	int open_mode;
-	int go;
-	int min_fragment;	/* 0 == unlimited */
-	int max_fragment;	/* 0 == unlimited */
-	int parent_dev;		/* 0 -> no parent, 1 to n -> parent=parent_dev+1 */
-
-	/* fields formerly in dmabuf.c */
-	wait_queue_head_t in_sleeper;
-	wait_queue_head_t out_sleeper;
-	wait_queue_head_t poll_sleeper;
-
-	/* fields formerly in audio.c */
-	int audio_mode;
-
-#define		AM_NONE		0
-#define		AM_WRITE	OPEN_WRITE
-#define 	AM_READ		OPEN_READ
-
-	int local_format;
-	int audio_format;
-	int local_conversion;
-#define CNV_MU_LAW	0x00000001
-
-	/* large structures at the end to keep offsets small */
-	struct dma_buffparms dmaps[2];
-};
-
-int *load_mixer_volumes(char *name, int *levels, int present);
-
-struct mixer_operations 
-{
-	struct module *owner;
-	char id[16];
-	char name[64];
-	int (*ioctl) (int dev, unsigned int cmd, void __user * arg);
-	
-	void *devc;
-	int modify_counter;
-};
-
-struct synth_operations 
-{
-	struct module *owner;
-	char *id;	/* Unique identifier (ASCII) max 29 char */
-	struct synth_info *info;
-	int midi_dev;
-	int synth_type;
-	int synth_subtype;
-
-	int (*open) (int dev, int mode);
-	void (*close) (int dev);
-	int (*ioctl) (int dev, unsigned int cmd, void __user * arg);
-	int (*kill_note) (int dev, int voice, int note, int velocity);
-	int (*start_note) (int dev, int voice, int note, int velocity);
-	int (*set_instr) (int dev, int voice, int instr);
-	void (*reset) (int dev);
-	void (*hw_control) (int dev, unsigned char *event);
-	int (*load_patch) (int dev, int format, const char __user *addr,
-	     int count, int pmgr_flag);
-	void (*aftertouch) (int dev, int voice, int pressure);
-	void (*controller) (int dev, int voice, int ctrl_num, int value);
-	void (*panning) (int dev, int voice, int value);
-	void (*volume_method) (int dev, int mode);
-	void (*bender) (int dev, int chn, int value);
-	int (*alloc_voice) (int dev, int chn, int note, struct voice_alloc_info *alloc);
-	void (*setup_voice) (int dev, int voice, int chn);
-	int (*send_sysex)(int dev, unsigned char *bytes, int len);
-
- 	struct voice_alloc_info alloc;
- 	struct channel_info chn_info[16];
-	int emulation;
-#define	EMU_GM			1	/* General MIDI */
-#define	EMU_XG			2	/* Yamaha XG */
-#define MAX_SYSEX_BUF	64
-	unsigned char sysex_buf[MAX_SYSEX_BUF];
-	int sysex_ptr;
-};
-
-struct midi_input_info 
-{
-	/* MIDI input scanner variables */
-#define MI_MAX	10
-	volatile int             m_busy;
-    	unsigned char   m_buf[MI_MAX];
-	unsigned char	m_prev_status;	/* For running status */
-    	int             m_ptr;
-#define MST_INIT			0
-#define MST_DATA			1
-#define MST_SYSEX			2
-    	int             m_state;
-    	int             m_left;
-};
-
-struct midi_operations 
-{
-	struct module *owner;
-	struct midi_info info;
-	struct synth_operations *converter;
-	struct midi_input_info in_info;
-	int (*open) (int dev, int mode,
-		void (*inputintr)(int dev, unsigned char data),
-		void (*outputintr)(int dev)
-		);
-	void (*close) (int dev);
-	int (*ioctl) (int dev, unsigned int cmd, void __user * arg);
-	int (*outputc) (int dev, unsigned char data);
-	int (*start_read) (int dev);
-	int (*end_read) (int dev);
-	void (*kick)(int dev);
-	int (*command) (int dev, unsigned char *data);
-	int (*buffer_status) (int dev);
-	int (*prefix_cmd) (int dev, unsigned char status);
-	struct coproc_operations *coproc;
-	void *devc;
-};
-
-struct sound_lowlev_timer 
-{
-	int dev;
-	int priority;
-	unsigned int (*tmr_start)(int dev, unsigned int usecs);
-	void (*tmr_disable)(int dev);
-	void (*tmr_restart)(int dev);
-};
-
-struct sound_timer_operations 
-{
-	struct module *owner;
-	struct sound_timer_info info;
-	int priority;
-	int devlink;
-	int (*open)(int dev, int mode);
-	void (*close)(int dev);
-	int (*event)(int dev, unsigned char *ev);
-	unsigned long (*get_time)(int dev);
-	int (*ioctl) (int dev, unsigned int cmd, void __user * arg);
-	void (*arm_timer)(int dev, long time);
-};
-
-extern struct sound_timer_operations default_sound_timer;
-
-extern struct audio_operations *audio_devs[MAX_AUDIO_DEV];
-extern int num_audiodevs;
-extern struct mixer_operations *mixer_devs[MAX_MIXER_DEV];
-extern int num_mixers;
-extern struct synth_operations *synth_devs[MAX_SYNTH_DEV+MAX_MIDI_DEV];
-extern int num_synths;
-extern struct midi_operations *midi_devs[MAX_MIDI_DEV];
-extern int num_midis;
-extern struct sound_timer_operations * sound_timer_devs[MAX_TIMER_DEV];
-extern int num_sound_timers;
-
-extern int sound_map_buffer (int dev, struct dma_buffparms *dmap, buffmem_desc *info);
-void sound_timer_init (struct sound_lowlev_timer *t, char *name);
-void sound_dma_intr (int dev, struct dma_buffparms *dmap, int chan);
-
-#define AUDIO_DRIVER_VERSION	2
-#define MIXER_DRIVER_VERSION	2
-int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
-			int driver_size, int flags, unsigned int format_mask,
-			void *devc, int dma1, int dma2);
-int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
-			int driver_size, void *devc);
-
-void sound_unload_audiodev(int dev);
-void sound_unload_mixerdev(int dev);
-void sound_unload_mididev(int dev);
-void sound_unload_synthdev(int dev);
-void sound_unload_timerdev(int dev);
-int sound_alloc_mixerdev(void);
-int sound_alloc_timerdev(void);
-int sound_alloc_synthdev(void);
-int sound_alloc_mididev(void);
-#endif	/* _DEV_TABLE_H_ */
-
diff --git a/sound/oss/dmabuf.c b/sound/oss/dmabuf.c
deleted file mode 100644
index c5dd396c66a2..000000000000
--- a/sound/oss/dmabuf.c
+++ /dev/null
@@ -1,1268 +0,0 @@
-/*
- * sound/oss/dmabuf.c
- *
- * The DMA buffer manager for digitized voice applications
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Thomas Sailer   : moved several static variables into struct audio_operations
- *                   (which is grossly misnamed btw.) because they have the same
- *                   lifetime as the rest in there and dynamic allocation saves
- *                   12k or so
- * Thomas Sailer   : remove {in,out}_sleep_flag. It was used for the sleeper to
- *                   determine if it was woken up by the expiring timeout or by
- *                   an explicit wake_up. The return value from schedule_timeout
- *		     can be used instead; if 0, the wakeup was due to the timeout.
- *
- * Rob Riggs		Added persistent DMA buffers (1998/10/17)
- */
-
-#define BE_CONSERVATIVE
-#define SAMPLE_ROUNDUP 0
-
-#include <linux/mm.h>
-#include <linux/gfp.h>
-#include <linux/sched/signal.h>
-
-#include "sound_config.h"
-#include "sleep.h"
-
-#define DMAP_FREE_ON_CLOSE      0
-#define DMAP_KEEP_ON_CLOSE      1
-extern int sound_dmap_flag;
-
-static void dma_reset_output(int dev);
-static void dma_reset_input(int dev);
-static int local_start_dma(struct audio_operations *adev, unsigned long physaddr, int count, int dma_mode);
-
-
-
-static int debugmem;    	/* switched off by default */
-static int dma_buffsize = DSP_BUFFSIZE;
-
-static long dmabuf_timeout(struct dma_buffparms *dmap)
-{
-	long tmout;
-
-	tmout = (dmap->fragment_size * HZ) / dmap->data_rate;
-	tmout += HZ / 5;	/* Some safety distance */
-	if (tmout < (HZ / 2))
-		tmout = HZ / 2;
-	if (tmout > 20 * HZ)
-		tmout = 20 * HZ;
-	return tmout;
-}
-
-static int sound_alloc_dmap(struct dma_buffparms *dmap)
-{
-	char *start_addr, *end_addr;
-	int dma_pagesize;
-	int sz, size;
-	struct page *page;
-
-	dmap->mapping_flags &= ~DMA_MAP_MAPPED;
-
-	if (dmap->raw_buf != NULL)
-		return 0;	/* Already done */
-	if (dma_buffsize < 4096)
-		dma_buffsize = 4096;
-	dma_pagesize = (dmap->dma < 4) ? (64 * 1024) : (128 * 1024);
-	
-	/*
-	 *	Now check for the Cyrix problem.
-	 */
-	 
-	if(isa_dma_bridge_buggy==2)
-		dma_pagesize=32768;
-	 
-	dmap->raw_buf = NULL;
-	dmap->buffsize = dma_buffsize;
-	if (dmap->buffsize > dma_pagesize)
-		dmap->buffsize = dma_pagesize;
-	start_addr = NULL;
-	/*
-	 * Now loop until we get a free buffer. Try to get smaller buffer if
-	 * it fails. Don't accept smaller than 8k buffer for performance
-	 * reasons.
-	 */
-	while (start_addr == NULL && dmap->buffsize > PAGE_SIZE) {
-		for (sz = 0, size = PAGE_SIZE; size < dmap->buffsize; sz++, size <<= 1);
-		dmap->buffsize = PAGE_SIZE * (1 << sz);
-		start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA|__GFP_NOWARN, sz);
-		if (start_addr == NULL)
-			dmap->buffsize /= 2;
-	}
-
-	if (start_addr == NULL) {
-		printk(KERN_WARNING "Sound error: Couldn't allocate DMA buffer\n");
-		return -ENOMEM;
-	} else {
-		/* make some checks */
-		end_addr = start_addr + dmap->buffsize - 1;
-
-		if (debugmem)
-			printk(KERN_DEBUG "sound: start 0x%lx, end 0x%lx\n", (long) start_addr, (long) end_addr);
-		
-		/* now check if it fits into the same dma-pagesize */
-
-		if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1))
-		    || end_addr >= (char *) (MAX_DMA_ADDRESS)) {
-			printk(KERN_ERR "sound: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, dmap->buffsize);
-			return -EFAULT;
-		}
-	}
-	dmap->raw_buf = start_addr;
-	dmap->raw_buf_phys = dma_map_single(NULL, start_addr, dmap->buffsize, DMA_BIDIRECTIONAL);
-
-	for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-		SetPageReserved(page);
-	return 0;
-}
-
-static void sound_free_dmap(struct dma_buffparms *dmap)
-{
-	int sz, size;
-	struct page *page;
-	unsigned long start_addr, end_addr;
-
-	if (dmap->raw_buf == NULL)
-		return;
-	if (dmap->mapping_flags & DMA_MAP_MAPPED)
-		return;		/* Don't free mmapped buffer. Will use it next time */
-	for (sz = 0, size = PAGE_SIZE; size < dmap->buffsize; sz++, size <<= 1);
-
-	start_addr = (unsigned long) dmap->raw_buf;
-	end_addr = start_addr + dmap->buffsize;
-
-	for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-		ClearPageReserved(page);
-
-	dma_unmap_single(NULL, dmap->raw_buf_phys, dmap->buffsize, DMA_BIDIRECTIONAL);
-	free_pages((unsigned long) dmap->raw_buf, sz);
-	dmap->raw_buf = NULL;
-}
-
-
-/* Intel version !!!!!!!!! */
-
-static int sound_start_dma(struct dma_buffparms *dmap, unsigned long physaddr, int count, int dma_mode)
-{
-	unsigned long flags;
-	int chan = dmap->dma;
-
-	/* printk( "Start DMA%d %d, %d\n",  chan,  (int)(physaddr-dmap->raw_buf_phys),  count); */
-
-	flags = claim_dma_lock();
-	disable_dma(chan);
-	clear_dma_ff(chan);
-	set_dma_mode(chan, dma_mode);
-	set_dma_addr(chan, physaddr);
-	set_dma_count(chan, count);
-	enable_dma(chan);
-	release_dma_lock(flags);
-
-	return 0;
-}
-
-static void dma_init_buffers(struct dma_buffparms *dmap)
-{
-	dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0;
-	dmap->byte_counter = 0;
-	dmap->max_byte_counter = 8000 * 60 * 60;
-	dmap->bytes_in_use = dmap->buffsize;
-
-	dmap->dma_mode = DMODE_NONE;
-	dmap->mapping_flags = 0;
-	dmap->neutral_byte = 0x80;
-	dmap->data_rate = 8000;
-	dmap->cfrag = -1;
-	dmap->closing = 0;
-	dmap->nbufs = 1;
-	dmap->flags = DMA_BUSY;	/* Other flags off */
-}
-
-static int open_dmap(struct audio_operations *adev, int mode, struct dma_buffparms *dmap)
-{
-	int err;
-	
-	if (dmap->flags & DMA_BUSY)
-		return -EBUSY;
-	if ((err = sound_alloc_dmap(dmap)) < 0)
-		return err;
-
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_WARNING "Sound: DMA buffers not available\n");
-		return -ENOSPC;	/* Memory allocation failed during boot */
-	}
-	if (dmap->dma >= 0 && sound_open_dma(dmap->dma, adev->name)) {
-		printk(KERN_WARNING "Unable to grab(2) DMA%d for the audio driver\n", dmap->dma);
-		return -EBUSY;
-	}
-	dma_init_buffers(dmap);
-	spin_lock_init(&dmap->lock);
-	dmap->open_mode = mode;
-	dmap->subdivision = dmap->underrun_count = 0;
-	dmap->fragment_size = 0;
-	dmap->max_fragments = 65536;	/* Just a large value */
-	dmap->byte_counter = 0;
-	dmap->max_byte_counter = 8000 * 60 * 60;
-	dmap->applic_profile = APF_NORMAL;
-	dmap->needs_reorg = 1;
-	dmap->audio_callback = NULL;
-	dmap->callback_parm = 0;
-	return 0;
-}
-
-static void close_dmap(struct audio_operations *adev, struct dma_buffparms *dmap)
-{
-	unsigned long flags;
-	
-	if (dmap->dma >= 0) {
-		sound_close_dma(dmap->dma);
-		flags=claim_dma_lock();
-		disable_dma(dmap->dma);
-		release_dma_lock(flags);
-	}
-	if (dmap->flags & DMA_BUSY)
-		dmap->dma_mode = DMODE_NONE;
-	dmap->flags &= ~DMA_BUSY;
-	
-	if (sound_dmap_flag == DMAP_FREE_ON_CLOSE)
-		sound_free_dmap(dmap);
-}
-
-
-static unsigned int default_set_bits(int dev, unsigned int bits)
-{
-	mm_segment_t fs = get_fs();
-
-	set_fs(get_ds());
-	audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_SETFMT, (void __user *)&bits);
-	set_fs(fs);
-	return bits;
-}
-
-static int default_set_speed(int dev, int speed)
-{
-	mm_segment_t fs = get_fs();
-
-	set_fs(get_ds());
-	audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_SPEED, (void __user *)&speed);
-	set_fs(fs);
-	return speed;
-}
-
-static short default_set_channels(int dev, short channels)
-{
-	int c = channels;
-	mm_segment_t fs = get_fs();
-
-	set_fs(get_ds());
-	audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_CHANNELS, (void __user *)&c);
-	set_fs(fs);
-	return c;
-}
-
-static void check_driver(struct audio_driver *d)
-{
-	if (d->set_speed == NULL)
-		d->set_speed = default_set_speed;
-	if (d->set_bits == NULL)
-		d->set_bits = default_set_bits;
-	if (d->set_channels == NULL)
-		d->set_channels = default_set_channels;
-}
-
-int DMAbuf_open(int dev, int mode)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	int retval;
-	struct dma_buffparms *dmap_in = NULL;
-	struct dma_buffparms *dmap_out = NULL;
-
-	if (!adev)
-		  return -ENXIO;
-	if (!(adev->flags & DMA_DUPLEX))
-		adev->dmap_in = adev->dmap_out;
-	check_driver(adev->d);
-
-	if ((retval = adev->d->open(dev, mode)) < 0)
-		return retval;
-	dmap_out = adev->dmap_out;
-	dmap_in = adev->dmap_in;
-	if (dmap_in == dmap_out)
-		adev->flags &= ~DMA_DUPLEX;
-
-	if (mode & OPEN_WRITE) {
-		if ((retval = open_dmap(adev, mode, dmap_out)) < 0) {
-			adev->d->close(dev);
-			return retval;
-		}
-	}
-	adev->enable_bits = mode;
-
-	if (mode == OPEN_READ || (mode != OPEN_WRITE && (adev->flags & DMA_DUPLEX))) {
-		if ((retval = open_dmap(adev, mode, dmap_in)) < 0) {
-			adev->d->close(dev);
-			if (mode & OPEN_WRITE)
-				close_dmap(adev, dmap_out);
-			return retval;
-		}
-	}
-	adev->open_mode = mode;
-	adev->go = 1;
-
-	adev->d->set_bits(dev, 8);
-	adev->d->set_channels(dev, 1);
-	adev->d->set_speed(dev, DSP_DEFAULT_SPEED);
-	if (adev->dmap_out->dma_mode == DMODE_OUTPUT) 
-		memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte,
-		       adev->dmap_out->bytes_in_use);
-	return 0;
-}
-/* MUST not hold the spinlock */
-void DMAbuf_reset(int dev)
-{
-	if (audio_devs[dev]->open_mode & OPEN_WRITE)
-		dma_reset_output(dev);
-
-	if (audio_devs[dev]->open_mode & OPEN_READ)
-		dma_reset_input(dev);
-}
-
-static void dma_reset_output(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags,f ;
-	struct dma_buffparms *dmap = adev->dmap_out;
-
-	if (!(dmap->flags & DMA_STARTED))	/* DMA is not active */
-		return;
-
-	/*
-	 *	First wait until the current fragment has been played completely
-	 */
-	spin_lock_irqsave(&dmap->lock,flags);
-	adev->dmap_out->flags |= DMA_SYNCING;
-
-	adev->dmap_out->underrun_count = 0;
-	if (!signal_pending(current) && adev->dmap_out->qlen && 
-	    adev->dmap_out->underrun_count == 0){
-		spin_unlock_irqrestore(&dmap->lock,flags);
-		oss_broken_sleep_on(&adev->out_sleeper, dmabuf_timeout(dmap));
-		spin_lock_irqsave(&dmap->lock,flags);
-	}
-	adev->dmap_out->flags &= ~(DMA_SYNCING | DMA_ACTIVE);
-
-	/*
-	 *	Finally shut the device off
-	 */
-	if (!(adev->flags & DMA_DUPLEX) || !adev->d->halt_output)
-		adev->d->halt_io(dev);
-	else
-		adev->d->halt_output(dev);
-	adev->dmap_out->flags &= ~DMA_STARTED;
-	
-	f=claim_dma_lock();
-	clear_dma_ff(dmap->dma);
-	disable_dma(dmap->dma);
-	release_dma_lock(f);
-	
-	dmap->byte_counter = 0;
-	reorganize_buffers(dev, adev->dmap_out, 0);
-	dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0;
-	spin_unlock_irqrestore(&dmap->lock,flags);
-}
-
-static void dma_reset_input(int dev)
-{
-        struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags;
-	struct dma_buffparms *dmap = adev->dmap_in;
-
-	spin_lock_irqsave(&dmap->lock,flags);
-	if (!(adev->flags & DMA_DUPLEX) || !adev->d->halt_input)
-		adev->d->halt_io(dev);
-	else
-		adev->d->halt_input(dev);
-	adev->dmap_in->flags &= ~DMA_STARTED;
-
-	dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0;
-	dmap->byte_counter = 0;
-	reorganize_buffers(dev, adev->dmap_in, 1);
-	spin_unlock_irqrestore(&dmap->lock,flags);
-}
-/* MUST be called with holding the dmap->lock */
-void DMAbuf_launch_output(int dev, struct dma_buffparms *dmap)
-{
-	struct audio_operations *adev = audio_devs[dev];
-
-	if (!((adev->enable_bits * adev->go) & PCM_ENABLE_OUTPUT))
-		return;		/* Don't start DMA yet */
-	dmap->dma_mode = DMODE_OUTPUT;
-
-	if (!(dmap->flags & DMA_ACTIVE) || !(adev->flags & DMA_AUTOMODE) || (dmap->flags & DMA_NODMA)) {
-		if (!(dmap->flags & DMA_STARTED)) {
-			reorganize_buffers(dev, dmap, 0);
-			if (adev->d->prepare_for_output(dev, dmap->fragment_size, dmap->nbufs))
-				return;
-			if (!(dmap->flags & DMA_NODMA))
-				local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use,DMA_MODE_WRITE);
-			dmap->flags |= DMA_STARTED;
-		}
-		if (dmap->counts[dmap->qhead] == 0)
-			dmap->counts[dmap->qhead] = dmap->fragment_size;
-		dmap->dma_mode = DMODE_OUTPUT;
-		adev->d->output_block(dev, dmap->raw_buf_phys + dmap->qhead * dmap->fragment_size,
-				      dmap->counts[dmap->qhead], 1);
-		if (adev->d->trigger)
-			adev->d->trigger(dev,adev->enable_bits * adev->go);
-	}
-	dmap->flags |= DMA_ACTIVE;
-}
-
-int DMAbuf_sync(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags;
-	int n = 0;
-	struct dma_buffparms *dmap;
-
-	if (!adev->go && !(adev->enable_bits & PCM_ENABLE_OUTPUT))
-		return 0;
-
-	if (adev->dmap_out->dma_mode == DMODE_OUTPUT) {
-		dmap = adev->dmap_out;
-		spin_lock_irqsave(&dmap->lock,flags);
-		if (dmap->qlen > 0 && !(dmap->flags & DMA_ACTIVE))
-			DMAbuf_launch_output(dev, dmap);
-		adev->dmap_out->flags |= DMA_SYNCING;
-		adev->dmap_out->underrun_count = 0;
-		while (!signal_pending(current) && n++ < adev->dmap_out->nbufs &&
-		       adev->dmap_out->qlen && adev->dmap_out->underrun_count == 0) {
-			long t = dmabuf_timeout(dmap);
-			spin_unlock_irqrestore(&dmap->lock,flags);
-			/* FIXME: not safe may miss events */
-			t = oss_broken_sleep_on(&adev->out_sleeper, t);
-			spin_lock_irqsave(&dmap->lock,flags);
-			if (!t) {
-				adev->dmap_out->flags &= ~DMA_SYNCING;
-				spin_unlock_irqrestore(&dmap->lock,flags);
-				return adev->dmap_out->qlen;
-			}
-		}
-		adev->dmap_out->flags &= ~(DMA_SYNCING | DMA_ACTIVE);
-		
-		/*
-		 * Some devices such as GUS have huge amount of on board RAM for the
-		 * audio data. We have to wait until the device has finished playing.
-		 */
-
-		/* still holding the lock */
-		if (adev->d->local_qlen) {   /* Device has hidden buffers */
-			while (!signal_pending(current) &&
-			       adev->d->local_qlen(dev)){
-				spin_unlock_irqrestore(&dmap->lock,flags);
-				oss_broken_sleep_on(&adev->out_sleeper,
-							       dmabuf_timeout(dmap));
-				spin_lock_irqsave(&dmap->lock,flags);
-			}
-		}
-		spin_unlock_irqrestore(&dmap->lock,flags);
-	}
-	adev->dmap_out->dma_mode = DMODE_NONE;
-	return adev->dmap_out->qlen;
-}
-
-int DMAbuf_release(int dev, int mode)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap;
-	unsigned long flags;
-
-	dmap = adev->dmap_out;
-	if (adev->open_mode & OPEN_WRITE)
-		adev->dmap_out->closing = 1;
-
-	if (adev->open_mode & OPEN_READ){
-		adev->dmap_in->closing = 1;
-		dmap = adev->dmap_in;
-	}
-	if (adev->open_mode & OPEN_WRITE)
-		if (!(adev->dmap_out->mapping_flags & DMA_MAP_MAPPED))
-			if (!signal_pending(current) && (adev->dmap_out->dma_mode == DMODE_OUTPUT))
-				DMAbuf_sync(dev);
-	if (adev->dmap_out->dma_mode == DMODE_OUTPUT)
-		memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte, adev->dmap_out->bytes_in_use);
-
-	DMAbuf_reset(dev);
-	spin_lock_irqsave(&dmap->lock,flags);
-	adev->d->close(dev);
-
-	if (adev->open_mode & OPEN_WRITE)
-		close_dmap(adev, adev->dmap_out);
-
-	if (adev->open_mode == OPEN_READ ||
-	    (adev->open_mode != OPEN_WRITE &&
-	     (adev->flags & DMA_DUPLEX)))
-		close_dmap(adev, adev->dmap_in);
-	adev->open_mode = 0;
-	spin_unlock_irqrestore(&dmap->lock,flags);
-	return 0;
-}
-/* called with dmap->lock dold */
-int DMAbuf_activate_recording(int dev, struct dma_buffparms *dmap)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	int  err;
-
-	if (!(adev->open_mode & OPEN_READ))
-		return 0;
-	if (!(adev->enable_bits & PCM_ENABLE_INPUT))
-		return 0;
-	if (dmap->dma_mode == DMODE_OUTPUT) {	/* Direction change */
-		/* release lock - it's not recursive */
-		spin_unlock_irq(&dmap->lock);
-		DMAbuf_sync(dev);
-		DMAbuf_reset(dev);
-		spin_lock_irq(&dmap->lock);
-		dmap->dma_mode = DMODE_NONE;
-	}
-	if (!dmap->dma_mode) {
-		reorganize_buffers(dev, dmap, 1);
-		if ((err = adev->d->prepare_for_input(dev,
-				dmap->fragment_size, dmap->nbufs)) < 0)
-			return err;
-		dmap->dma_mode = DMODE_INPUT;
-	}
-	if (!(dmap->flags & DMA_ACTIVE)) {
-		if (dmap->needs_reorg)
-			reorganize_buffers(dev, dmap, 0);
-		local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use, DMA_MODE_READ);
-		adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size,
-				     dmap->fragment_size, 0);
-		dmap->flags |= DMA_ACTIVE;
-		if (adev->d->trigger)
-			adev->d->trigger(dev, adev->enable_bits * adev->go);
-	}
-	return 0;
-}
-/* acquires lock */
-int DMAbuf_getrdbuffer(int dev, char **buf, int *len, int dontblock)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags;
-	int err = 0, n = 0;
-	struct dma_buffparms *dmap = adev->dmap_in;
-
-	if (!(adev->open_mode & OPEN_READ))
-		return -EIO;
-	spin_lock_irqsave(&dmap->lock,flags);
-	if (dmap->needs_reorg)
-		reorganize_buffers(dev, dmap, 0);
-	if (adev->dmap_in->mapping_flags & DMA_MAP_MAPPED) {
-/*		  printk(KERN_WARNING "Sound: Can't read from mmapped device (1)\n");*/
-		  spin_unlock_irqrestore(&dmap->lock,flags);
-		  return -EINVAL;
-	} else while (dmap->qlen <= 0 && n++ < 10) {
-		long timeout = MAX_SCHEDULE_TIMEOUT;
-		if (!(adev->enable_bits & PCM_ENABLE_INPUT) || !adev->go) {
-			spin_unlock_irqrestore(&dmap->lock,flags);
-			return -EAGAIN;
-		}
-		if ((err = DMAbuf_activate_recording(dev, dmap)) < 0) {
-			spin_unlock_irqrestore(&dmap->lock,flags);
-			return err;
-		}
-		/* Wait for the next block */
-
-		if (dontblock) {
-			spin_unlock_irqrestore(&dmap->lock,flags);
-			return -EAGAIN;
-		}
-		if (adev->go)
-			timeout = dmabuf_timeout(dmap);
-
-		spin_unlock_irqrestore(&dmap->lock,flags);
-		timeout = oss_broken_sleep_on(&adev->in_sleeper, timeout);
-		if (!timeout) {
-			/* FIXME: include device name */
-			err = -EIO;
-			printk(KERN_WARNING "Sound: DMA (input) timed out - IRQ/DRQ config error?\n");
-			dma_reset_input(dev);
-		} else
-			err = -EINTR;
-		spin_lock_irqsave(&dmap->lock,flags);
-	}
-	spin_unlock_irqrestore(&dmap->lock,flags);
-
-	if (dmap->qlen <= 0)
-		return err ? err : -EINTR;
-	*buf = &dmap->raw_buf[dmap->qhead * dmap->fragment_size + dmap->counts[dmap->qhead]];
-	*len = dmap->fragment_size - dmap->counts[dmap->qhead];
-
-	return dmap->qhead;
-}
-
-int DMAbuf_rmchars(int dev, int buff_no, int c)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_in;
-	int p = dmap->counts[dmap->qhead] + c;
-
-	if (dmap->mapping_flags & DMA_MAP_MAPPED)
-	{
-/*		  printk("Sound: Can't read from mmapped device (2)\n");*/
-		return -EINVAL;
-	}
-	else if (dmap->qlen <= 0)
-		return -EIO;
-	else if (p >= dmap->fragment_size) {  /* This buffer is completely empty */
-		dmap->counts[dmap->qhead] = 0;
-		dmap->qlen--;
-		dmap->qhead = (dmap->qhead + 1) % dmap->nbufs;
-	}
-	else dmap->counts[dmap->qhead] = p;
-
-	return 0;
-}
-/* MUST be called with dmap->lock hold */
-int DMAbuf_get_buffer_pointer(int dev, struct dma_buffparms *dmap, int direction)
-{
-	/*
-	 *	Try to approximate the active byte position of the DMA pointer within the
-	 *	buffer area as well as possible.
-	 */
-
-	int pos;
-	unsigned long f;
-
-	if (!(dmap->flags & DMA_ACTIVE))
-		pos = 0;
-	else {
-		int chan = dmap->dma;
-		
-		f=claim_dma_lock();
-		clear_dma_ff(chan);
-		
-		if(!isa_dma_bridge_buggy)
-			disable_dma(dmap->dma);
-		
-		pos = get_dma_residue(chan);
-		
-		pos = dmap->bytes_in_use - pos;
-
-		if (!(dmap->mapping_flags & DMA_MAP_MAPPED)) {
-			if (direction == DMODE_OUTPUT) {
-				if (dmap->qhead == 0)
-					if (pos > dmap->fragment_size)
-						pos = 0;
-			} else {
-				if (dmap->qtail == 0)
-					if (pos > dmap->fragment_size)
-						pos = 0;
-			}
-		}
-		if (pos < 0)
-			pos = 0;
-		if (pos >= dmap->bytes_in_use)
-			pos = 0;
-		
-		if(!isa_dma_bridge_buggy)
-			enable_dma(dmap->dma);
-			
-		release_dma_lock(f);
-	}
-	/* printk( "%04x ",  pos); */
-
-	return pos;
-}
-
-/*
- *	DMAbuf_start_devices() is called by the /dev/music driver to start
- *	one or more audio devices at desired moment.
- */
-
-void DMAbuf_start_devices(unsigned int devmask)
-{
-	struct audio_operations *adev;
-	int dev;
-
-	for (dev = 0; dev < num_audiodevs; dev++) {
-		if (!(devmask & (1 << dev)))
-			continue;
-		if (!(adev = audio_devs[dev]))
-			continue;
-		if (adev->open_mode == 0)
-			continue;
-		if (adev->go)
-			continue;
-		/* OK to start the device */
-		adev->go = 1;
-		if (adev->d->trigger)
-			adev->d->trigger(dev,adev->enable_bits * adev->go);
-	}
-}
-/* via poll called without a lock ?*/
-int DMAbuf_space_in_queue(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	int len, max, tmp;
-	struct dma_buffparms *dmap = adev->dmap_out;
-	int lim = dmap->nbufs;
-
-	if (lim < 2)
-		lim = 2;
-
-	if (dmap->qlen >= lim)	/* No space at all */
-		return 0;
-
-	/*
-	 *	Verify that there are no more pending buffers than the limit
-	 *	defined by the process.
-	 */
-
-	max = dmap->max_fragments;
-	if (max > lim)
-		max = lim;
-	len = dmap->qlen;
-
-	if (adev->d->local_qlen) {
-		tmp = adev->d->local_qlen(dev);
-		if (tmp && len)
-			tmp--;	/* This buffer has been counted twice */
-		len += tmp;
-	}
-	if (dmap->byte_counter % dmap->fragment_size)	/* There is a partial fragment */
-		len = len + 1;
-
-	if (len >= max)
-		return 0;
-	return max - len;
-}
-/* MUST not hold the spinlock  - this function may sleep */
-static int output_sleep(int dev, int dontblock)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	int err = 0;
-	struct dma_buffparms *dmap = adev->dmap_out;
-	long timeout;
-	long timeout_value;
-
-	if (dontblock)
-		return -EAGAIN;
-	if (!(adev->enable_bits & PCM_ENABLE_OUTPUT))
-		return -EAGAIN;
-
-	/*
-	 * Wait for free space
-	 */
-	if (signal_pending(current))
-		return -EINTR;
-	timeout = (adev->go && !(dmap->flags & DMA_NOTIMEOUT));
-	if (timeout) 
-		timeout_value = dmabuf_timeout(dmap);
-	else
-		timeout_value = MAX_SCHEDULE_TIMEOUT;
-	timeout_value = oss_broken_sleep_on(&adev->out_sleeper, timeout_value);
-	if (timeout != MAX_SCHEDULE_TIMEOUT && !timeout_value) {
-		printk(KERN_WARNING "Sound: DMA (output) timed out - IRQ/DRQ config error?\n");
-		dma_reset_output(dev);
-	} else {
-		if (signal_pending(current))
-			err = -EINTR;
-	}
-	return err;
-}
-/* called with the lock held */
-static int find_output_space(int dev, char **buf, int *size)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_out;
-	unsigned long active_offs;
-	long len, offs;
-	int maxfrags;
-	int occupied_bytes = (dmap->user_counter % dmap->fragment_size);
-
-	*buf = dmap->raw_buf;
-	if (!(maxfrags = DMAbuf_space_in_queue(dev)) && !occupied_bytes)
-		return 0;
-
-#ifdef BE_CONSERVATIVE
-	active_offs = dmap->byte_counter + dmap->qhead * dmap->fragment_size;
-#else
-	active_offs = max(DMAbuf_get_buffer_pointer(dev, dmap, DMODE_OUTPUT), 0);
-	/* Check for pointer wrapping situation */
-	if (active_offs >= dmap->bytes_in_use)
-		active_offs = 0;
-	active_offs += dmap->byte_counter;
-#endif
-
-	offs = (dmap->user_counter % dmap->bytes_in_use) & ~SAMPLE_ROUNDUP;
-	if (offs < 0 || offs >= dmap->bytes_in_use) {
-		printk(KERN_ERR "Sound: Got unexpected offs %ld. Giving up.\n", offs);
-		printk("Counter = %ld, bytes=%d\n", dmap->user_counter, dmap->bytes_in_use);
-		return 0;
-	}
-	*buf = dmap->raw_buf + offs;
-
-	len = active_offs + dmap->bytes_in_use - dmap->user_counter;	/* Number of unused bytes in buffer */
-
-	if ((offs + len) > dmap->bytes_in_use)
-		len = dmap->bytes_in_use - offs;
-	if (len < 0) {
-		return 0;
-	}
-	if (len > ((maxfrags * dmap->fragment_size) - occupied_bytes))
-		len = (maxfrags * dmap->fragment_size) - occupied_bytes;
-	*size = len & ~SAMPLE_ROUNDUP;
-	return (*size > 0);
-}
-/* acquires lock  */
-int DMAbuf_getwrbuffer(int dev, char **buf, int *size, int dontblock)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags;
-	int err = -EIO;
-	struct dma_buffparms *dmap = adev->dmap_out;
-
-	if (dmap->mapping_flags & DMA_MAP_MAPPED) {
-/*		printk(KERN_DEBUG "Sound: Can't write to mmapped device (3)\n");*/
-		return -EINVAL;
-	}
-	spin_lock_irqsave(&dmap->lock,flags);
-	if (dmap->needs_reorg)
-		reorganize_buffers(dev, dmap, 0);
-
-	if (dmap->dma_mode == DMODE_INPUT) {	/* Direction change */
-		spin_unlock_irqrestore(&dmap->lock,flags);
-		DMAbuf_reset(dev);
-		spin_lock_irqsave(&dmap->lock,flags);
-	}
-	dmap->dma_mode = DMODE_OUTPUT;
-
-	while (find_output_space(dev, buf, size) <= 0) {
-		spin_unlock_irqrestore(&dmap->lock,flags);
-		if ((err = output_sleep(dev, dontblock)) < 0) {
-			return err;
-		}
-		spin_lock_irqsave(&dmap->lock,flags);
-	}
-
-	spin_unlock_irqrestore(&dmap->lock,flags);
-	return 0;
-}
-/* has to acquire dmap->lock */
-int DMAbuf_move_wrpointer(int dev, int l)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_out;
-	unsigned long ptr;
-	unsigned long end_ptr, p;
-	int post;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dmap->lock,flags);
-	post= (dmap->flags & DMA_POST);
-	ptr = (dmap->user_counter / dmap->fragment_size) * dmap->fragment_size;
-
-	dmap->flags &= ~DMA_POST;
-	dmap->cfrag = -1;
-	dmap->user_counter += l;
-	dmap->flags |= DMA_DIRTY;
-
-	if (dmap->byte_counter >= dmap->max_byte_counter) {
-		/* Wrap the byte counters */
-		long decr = dmap->byte_counter;
-		dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use);
-		decr -= dmap->byte_counter;
-		dmap->user_counter -= decr;
-	}
-	end_ptr = (dmap->user_counter / dmap->fragment_size) * dmap->fragment_size;
-
-	p = (dmap->user_counter - 1) % dmap->bytes_in_use;
-	dmap->neutral_byte = dmap->raw_buf[p];
-
-	/* Update the fragment based bookkeeping too */
-	while (ptr < end_ptr) {
-		dmap->counts[dmap->qtail] = dmap->fragment_size;
-		dmap->qtail = (dmap->qtail + 1) % dmap->nbufs;
-		dmap->qlen++;
-		ptr += dmap->fragment_size;
-	}
-
-	dmap->counts[dmap->qtail] = dmap->user_counter - ptr;
-
-	/*
-	 *	Let the low level driver perform some postprocessing to
-	 *	the written data.
-	 */
-	if (adev->d->postprocess_write)
-		adev->d->postprocess_write(dev);
-
-	if (!(dmap->flags & DMA_ACTIVE))
-		if (dmap->qlen > 1 || (dmap->qlen > 0 && (post || dmap->qlen >= dmap->nbufs - 1)))
-			DMAbuf_launch_output(dev, dmap);
-
-	spin_unlock_irqrestore(&dmap->lock,flags);
-	return 0;
-}
-
-int DMAbuf_start_dma(int dev, unsigned long physaddr, int count, int dma_mode)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = (dma_mode == DMA_MODE_WRITE) ? adev->dmap_out : adev->dmap_in;
-
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_ERR "sound: DMA buffer(1) == NULL\n");
-		printk("Device %d, chn=%s\n", dev, (dmap == adev->dmap_out) ? "out" : "in");
-		return 0;
-	}
-	if (dmap->dma < 0)
-		return 0;
-	sound_start_dma(dmap, physaddr, count, dma_mode);
-	return count;
-}
-EXPORT_SYMBOL(DMAbuf_start_dma);
-
-static int local_start_dma(struct audio_operations *adev, unsigned long physaddr, int count, int dma_mode)
-{
-	struct dma_buffparms *dmap = (dma_mode == DMA_MODE_WRITE) ? adev->dmap_out : adev->dmap_in;
-
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_ERR "sound: DMA buffer(2) == NULL\n");
-		printk(KERN_ERR "Device %s, chn=%s\n", adev->name, (dmap == adev->dmap_out) ? "out" : "in");
-		return 0;
-	}
-	if (dmap->flags & DMA_NODMA)
-		return 1;
-	if (dmap->dma < 0)
-		return 0;
-	sound_start_dma(dmap, dmap->raw_buf_phys, dmap->bytes_in_use, dma_mode | DMA_AUTOINIT);
-	dmap->flags |= DMA_STARTED;
-	return count;
-}
-
-static void finish_output_interrupt(int dev, struct dma_buffparms *dmap)
-{
-	struct audio_operations *adev = audio_devs[dev];
-
-	if (dmap->audio_callback != NULL)
-		dmap->audio_callback(dev, dmap->callback_parm);
-	wake_up(&adev->out_sleeper);
-	wake_up(&adev->poll_sleeper);
-}
-/* called with dmap->lock held in irq context*/
-static void do_outputintr(int dev, int dummy)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_out;
-	int this_fragment;
-
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_ERR "Sound: Error. Audio interrupt (%d) after freeing buffers.\n", dev);
-		return;
-	}
-	if (dmap->mapping_flags & DMA_MAP_MAPPED) {	/* Virtual memory mapped access */
-		/* mmapped access */
-		dmap->qhead = (dmap->qhead + 1) % dmap->nbufs;
-		if (dmap->qhead == 0) {	    /* Wrapped */
-			dmap->byte_counter += dmap->bytes_in_use;
-			if (dmap->byte_counter >= dmap->max_byte_counter) {	/* Overflow */
-				long decr = dmap->byte_counter;
-				dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use);
-				decr -= dmap->byte_counter;
-				dmap->user_counter -= decr;
-			}
-		}
-		dmap->qlen++;	/* Yes increment it (don't decrement) */
-		if (!(adev->flags & DMA_AUTOMODE))
-			dmap->flags &= ~DMA_ACTIVE;
-		dmap->counts[dmap->qhead] = dmap->fragment_size;
-		DMAbuf_launch_output(dev, dmap);
-		finish_output_interrupt(dev, dmap);
-		return;
-	}
-
-	dmap->qlen--;
-	this_fragment = dmap->qhead;
-	dmap->qhead = (dmap->qhead + 1) % dmap->nbufs;
-
-	if (dmap->qhead == 0) {	/* Wrapped */
-		dmap->byte_counter += dmap->bytes_in_use;
-		if (dmap->byte_counter >= dmap->max_byte_counter) {	/* Overflow */
-			long decr = dmap->byte_counter;
-			dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use);
-			decr -= dmap->byte_counter;
-			dmap->user_counter -= decr;
-		}
-	}
-	if (!(adev->flags & DMA_AUTOMODE))
-		dmap->flags &= ~DMA_ACTIVE;
-		
-	/*
-	 *	This is  dmap->qlen <= 0 except when closing when
-	 *	dmap->qlen < 0
-	 */
-	 
-	while (dmap->qlen <= -dmap->closing) {
-		dmap->underrun_count++;
-		dmap->qlen++;
-		if ((dmap->flags & DMA_DIRTY) && dmap->applic_profile != APF_CPUINTENS) {
-			dmap->flags &= ~DMA_DIRTY;
-			memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte,
-			       adev->dmap_out->buffsize);
-		}
-		dmap->user_counter += dmap->fragment_size;
-		dmap->qtail = (dmap->qtail + 1) % dmap->nbufs;
-	}
-	if (dmap->qlen > 0)
-		DMAbuf_launch_output(dev, dmap);
-	finish_output_interrupt(dev, dmap);
-}
-/* called in irq context */
-void DMAbuf_outputintr(int dev, int notify_only)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	unsigned long flags;
-	struct dma_buffparms *dmap = adev->dmap_out;
-
-	spin_lock_irqsave(&dmap->lock,flags);
-	if (!(dmap->flags & DMA_NODMA)) {
-		int chan = dmap->dma, pos, n;
-		unsigned long f;
-		
-		f=claim_dma_lock();
-		
-		if(!isa_dma_bridge_buggy)
-			disable_dma(dmap->dma);
-		clear_dma_ff(chan);
-		pos = dmap->bytes_in_use - get_dma_residue(chan);
-		if(!isa_dma_bridge_buggy)
-			enable_dma(dmap->dma);
-		release_dma_lock(f);
-		
-		pos = pos / dmap->fragment_size;	/* Actual qhead */
-		if (pos < 0 || pos >= dmap->nbufs)
-			pos = 0;
-		n = 0;
-		while (dmap->qhead != pos && n++ < dmap->nbufs)
-			do_outputintr(dev, notify_only);
-	}
-	else
-		do_outputintr(dev, notify_only);
-	spin_unlock_irqrestore(&dmap->lock,flags);
-}
-EXPORT_SYMBOL(DMAbuf_outputintr);
-
-/* called with dmap->lock held in irq context */
-static void do_inputintr(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_in;
-
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_ERR "Sound: Fatal error. Audio interrupt after freeing buffers.\n");
-		return;
-	}
-	if (dmap->mapping_flags & DMA_MAP_MAPPED) {
-		dmap->qtail = (dmap->qtail + 1) % dmap->nbufs;
-		if (dmap->qtail == 0) {		/* Wrapped */
-			dmap->byte_counter += dmap->bytes_in_use;
-			if (dmap->byte_counter >= dmap->max_byte_counter) {	/* Overflow */
-				long decr = dmap->byte_counter;
-				dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use) + dmap->bytes_in_use;
-				decr -= dmap->byte_counter;
-				dmap->user_counter -= decr;
-			}
-		}
-		dmap->qlen++;
-
-		if (!(adev->flags & DMA_AUTOMODE)) {
-			if (dmap->needs_reorg)
-				reorganize_buffers(dev, dmap, 0);
-			local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use,DMA_MODE_READ);
-			adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size,
-					     dmap->fragment_size, 1);
-			if (adev->d->trigger)
-				adev->d->trigger(dev, adev->enable_bits * adev->go);
-		}
-		dmap->flags |= DMA_ACTIVE;
-	} else if (dmap->qlen >= (dmap->nbufs - 1)) {
-		printk(KERN_WARNING "Sound: Recording overrun\n");
-		dmap->underrun_count++;
-
-		/* Just throw away the oldest fragment but keep the engine running */
-		dmap->qhead = (dmap->qhead + 1) % dmap->nbufs;
-		dmap->qtail = (dmap->qtail + 1) % dmap->nbufs;
-	} else if (dmap->qlen >= 0 && dmap->qlen < dmap->nbufs) {
-		dmap->qlen++;
-		dmap->qtail = (dmap->qtail + 1) % dmap->nbufs;
-		if (dmap->qtail == 0) {		/* Wrapped */
-			dmap->byte_counter += dmap->bytes_in_use;
-			if (dmap->byte_counter >= dmap->max_byte_counter) {	/* Overflow */
-				long decr = dmap->byte_counter;
-				dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use) + dmap->bytes_in_use;
-				decr -= dmap->byte_counter;
-				dmap->user_counter -= decr;
-			}
-		}
-	}
-	if (!(adev->flags & DMA_AUTOMODE) || (dmap->flags & DMA_NODMA)) {
-		local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use, DMA_MODE_READ);
-		adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size, dmap->fragment_size, 1);
-		if (adev->d->trigger)
-			adev->d->trigger(dev,adev->enable_bits * adev->go);
-	}
-	dmap->flags |= DMA_ACTIVE;
-	if (dmap->qlen > 0)
-	{
-		wake_up(&adev->in_sleeper);
-		wake_up(&adev->poll_sleeper);
-	}
-}
-/* called in irq context */
-void DMAbuf_inputintr(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_in;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dmap->lock,flags);
-
-	if (!(dmap->flags & DMA_NODMA)) {
-		int chan = dmap->dma, pos, n;
-		unsigned long f;
-		
-		f=claim_dma_lock();
-		if(!isa_dma_bridge_buggy)
-			disable_dma(dmap->dma);
-		clear_dma_ff(chan);
-		pos = dmap->bytes_in_use - get_dma_residue(chan);
-		if(!isa_dma_bridge_buggy)
-			enable_dma(dmap->dma);
-		release_dma_lock(f);
-
-		pos = pos / dmap->fragment_size;	/* Actual qhead */
-		if (pos < 0 || pos >= dmap->nbufs)
-			pos = 0;
-
-		n = 0;
-		while (dmap->qtail != pos && ++n < dmap->nbufs)
-			do_inputintr(dev);
-	} else
-		do_inputintr(dev);
-	spin_unlock_irqrestore(&dmap->lock,flags);
-}
-EXPORT_SYMBOL(DMAbuf_inputintr);
-
-void DMAbuf_init(int dev, int dma1, int dma2)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	/*
-	 * NOTE! This routine could be called several times.
-	 */
-
-	if (adev && adev->dmap_out == NULL) {
-		if (adev->d == NULL)
-			panic("OSS: audio_devs[%d]->d == NULL\n", dev);
-
-		if (adev->parent_dev) {	 /* Use DMA map of the parent dev */
-			int parent = adev->parent_dev - 1;
-			adev->dmap_out = audio_devs[parent]->dmap_out;
-			adev->dmap_in = audio_devs[parent]->dmap_in;
-		} else {
-			adev->dmap_out = adev->dmap_in = &adev->dmaps[0];
-			adev->dmap_out->dma = dma1;
-			if (adev->flags & DMA_DUPLEX) {
-				adev->dmap_in = &adev->dmaps[1];
-				adev->dmap_in->dma = dma2;
-			}
-		}
-		/* Persistent DMA buffers allocated here */
-		if (sound_dmap_flag == DMAP_KEEP_ON_CLOSE) {
-			if (adev->dmap_in->raw_buf == NULL)
-				sound_alloc_dmap(adev->dmap_in);
-			if (adev->dmap_out->raw_buf == NULL)
-				sound_alloc_dmap(adev->dmap_out);
-		}
-	}
-}
-
-/* No kernel lock - DMAbuf_activate_recording protected by global cli/sti */
-static unsigned int poll_input(struct file * file, int dev, poll_table *wait)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_in;
-
-	if (!(adev->open_mode & OPEN_READ))
-		return 0;
-	if (dmap->mapping_flags & DMA_MAP_MAPPED) {
-		if (dmap->qlen)
-			return POLLIN | POLLRDNORM;
-		return 0;
-	}
-	if (dmap->dma_mode != DMODE_INPUT) {
-		if (dmap->dma_mode == DMODE_NONE &&
-		    adev->enable_bits & PCM_ENABLE_INPUT &&
-		    !dmap->qlen && adev->go) {
-			unsigned long flags;
-			
-			spin_lock_irqsave(&dmap->lock,flags);
-			DMAbuf_activate_recording(dev, dmap);
-			spin_unlock_irqrestore(&dmap->lock,flags);
-		}
-		return 0;
-	}
-	if (!dmap->qlen)
-		return 0;
-	return POLLIN | POLLRDNORM;
-}
-
-static unsigned int poll_output(struct file * file, int dev, poll_table *wait)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	struct dma_buffparms *dmap = adev->dmap_out;
-	
-	if (!(adev->open_mode & OPEN_WRITE))
-		return 0;
-	if (dmap->mapping_flags & DMA_MAP_MAPPED) {
-		if (dmap->qlen)
-			return POLLOUT | POLLWRNORM;
-		return 0;
-	}
-	if (dmap->dma_mode == DMODE_INPUT)
-		return 0;
-	if (dmap->dma_mode == DMODE_NONE)
-		return POLLOUT | POLLWRNORM;
-	if (!DMAbuf_space_in_queue(dev))
-		return 0;
-	return POLLOUT | POLLWRNORM;
-}
-
-unsigned int DMAbuf_poll(struct file * file, int dev, poll_table *wait)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	poll_wait(file, &adev->poll_sleeper, wait);
-	return poll_input(file, dev, wait) | poll_output(file, dev, wait);
-}
-
-void DMAbuf_deinit(int dev)
-{
-	struct audio_operations *adev = audio_devs[dev];
-	/* This routine is called when driver is being unloaded */
-	if (!adev)
-		return;
-
-	/* Persistent DMA buffers deallocated here */
-	if (sound_dmap_flag == DMAP_KEEP_ON_CLOSE) {
-		sound_free_dmap(adev->dmap_out);
-		if (adev->flags & DMA_DUPLEX)
-			sound_free_dmap(adev->dmap_in);
-	}
-}
diff --git a/sound/oss/hex2hex.c b/sound/oss/hex2hex.c
deleted file mode 100644
index 041ef5c52bc2..000000000000
--- a/sound/oss/hex2hex.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * hex2hex reads stdin in Intel HEX format and produces an
- * (unsigned char) array which contains the bytes and writes it
- * to stdout using C syntax
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#define ABANDON(why) { fprintf(stderr, "%s\n", why); exit(1); }
-#define MAX_SIZE (256*1024)
-unsigned char buf[MAX_SIZE];
-
-static int loadhex(FILE *inf, unsigned char *buf)
-{
-	int l=0, c, i;
-
-	while ((c=getc(inf))!=EOF)
-	{
-		if (c == ':')	/* Sync with beginning of line */
-		{
-			int n, check;
-			unsigned char sum;
-			int addr;
-			int linetype;
-
-			if (fscanf(inf, "%02x", &n) != 1)
-			   ABANDON("File format error");
-			sum = n;
-
-			if (fscanf(inf, "%04x", &addr) != 1)
-			   ABANDON("File format error");
-			sum += addr/256;
-			sum += addr%256;
-
-			if (fscanf(inf, "%02x", &linetype) != 1)
-			   ABANDON("File format error");
-			sum += linetype;
-
-			if (linetype != 0)
-			   continue;
-
-			for (i=0;i<n;i++)
-			{
-				if (fscanf(inf, "%02x", &c) != 1)
-			   	   ABANDON("File format error");
-				if (addr >= MAX_SIZE)
-				   ABANDON("File too large");
-				buf[addr++] = c;
-				if (addr > l)
-				   l = addr;
-				sum += c;
-			}
-
-			if (fscanf(inf, "%02x", &check) != 1)
-			   ABANDON("File format error");
-
-			sum = ~sum + 1;
-			if (check != sum)
-			   ABANDON("Line checksum error");
-		}
-	}
-
-	return l;
-}
-
-int main( int argc, const char * argv [] )
-{
-	const char * varline;
-	int i,l;
-	int id=0;
-
-	if(argv[1] && strcmp(argv[1], "-i")==0)
-	{
-		argv++;
-		argc--;
-		id=1;
-	}
-	if(argv[1]==NULL)
-	{
-		fprintf(stderr,"hex2hex: [-i] filename\n");
-		exit(1);
-	}
-	varline = argv[1];
-	l = loadhex(stdin, buf);
-
-	printf("/*\n *\t Computer generated file. Do not edit.\n */\n");
-        printf("static int %s_len = %d;\n", varline, l);
-	printf("static unsigned char %s[] %s = {\n", varline, id?"__initdata":"");
-
-	for (i=0;i<l;i++)
-	{
-		if (i) printf(",");
-		if (i && !(i % 16)) printf("\n");
-		printf("0x%02x", buf[i]);
-	}
-
-	printf("\n};\n\n");
-	return 0;
-}
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
deleted file mode 100644
index c4b0434c7604..000000000000
--- a/sound/oss/kahlua.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- *	Initialisation code for Cyrix/NatSemi VSA1 softaudio
- *
- *	(C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk>
- *
- * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems.
- * The older version (VSA1) provides fairly good soundblaster emulation
- * although there are a couple of bugs: large DMA buffers break record,
- * and the MPU event handling seems suspect. VSA2 allows the native driver
- * to control the AC97 audio engine directly and requires a different driver.
- *
- * Thanks to National Semiconductor for providing the needed information
- * on the XpressAudio(tm) internals.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * TO DO:
- *	Investigate whether we can portably support Cognac (5520) in the
- *	same manner.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "sound_config.h"
-
-#include "sb.h"
-
-/*
- *	Read a soundblaster compatible mixer register.
- *	In this case we are actually reading an SMI trap
- *	not real hardware.
- */
-
-static u8 mixer_read(unsigned long io, u8 reg)
-{
-	outb(reg, io + 4);
-	udelay(20);
-	reg = inb(io + 5);
-	udelay(20);
-	return reg;
-}
-
-static int probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	struct address_info *hw_config;
-	unsigned long base;
-	void __iomem *mem;
-	unsigned long io;
-	u16 map;
-	u8 irq, dma8, dma16;
-	int oldquiet;
-	extern int sb_be_quiet;
-		
-	base = pci_resource_start(pdev, 0);
-	if(base == 0UL)
-		return 1;
-	
-	mem = ioremap(base, 128);
-	if (!mem)
-		return 1;
-	map = readw(mem + 0x18);	/* Read the SMI enables */
-	iounmap(mem);
-	
-	/* Map bits
-		0:1	* 0x20 + 0x200 = sb base
-		2	sb enable
-		3	adlib enable
-		5	MPU enable 0x330
-		6	MPU enable 0x300
-		
-	   The other bits may be used internally so must be masked */
-
-	io = 0x220 + 0x20 * (map & 3);	   
-	
-	if(map & (1<<2))
-		printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io);
-	else
-		return 1;
-		
-	if(map & (1<<5))
-		printk(KERN_INFO "kahlua: MPU at 0x300\n");
-	else if(map & (1<<6))
-		printk(KERN_INFO "kahlua: MPU at 0x330\n");
-	
-	irq = mixer_read(io, 0x80) & 0x0F;
-	dma8 = mixer_read(io, 0x81);
-
-	// printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8);
-	
-	if(dma8 & 0x20)
-		dma16 = 5;
-	else if(dma8 & 0x40)
-		dma16 = 6;
-	else if(dma8 & 0x80)
-		dma16 = 7;
-	else
-	{
-		printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n");
-		return 1;
-	}
-		
-	if(dma8 & 0x01)
-		dma8 = 0;
-	else if(dma8 & 0x02)
-		dma8 = 1;
-	else if(dma8 & 0x08)
-		dma8 = 3;
-	else
-	{
-		printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n");
-		return 1;
-	}
-	
-	if(irq & 1)
-		irq = 9;
-	else if(irq & 2)
-		irq = 5;
-	else if(irq & 4)
-		irq = 7;
-	else if(irq & 8)
-		irq = 10;
-	else
-	{
-		printk(KERN_ERR "kahlua: SB IRQ not set.\n");
-		return 1;
-	}
-	
-	printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n",
-		irq, dma8, dma16);
-	
-	hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL);
-	if(hw_config == NULL)
-	{
-		printk(KERN_ERR "kahlua: out of memory.\n");
-		return 1;
-	}
-	
-	pci_set_drvdata(pdev, hw_config);
-	
-	hw_config->io_base = io;
-	hw_config->irq = irq;
-	hw_config->dma = dma8;
-	hw_config->dma2 = dma16;
-	hw_config->name = "Cyrix XpressAudio";
-	hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ;
-
-	if (!request_region(io, 16, "soundblaster"))
-		goto err_out_free;
-	
-	if(sb_dsp_detect(hw_config, 0, 0, NULL)==0)
-	{
-		printk(KERN_ERR "kahlua: audio not responding.\n");
-		release_region(io, 16);
-		goto err_out_free;
-	}
-
-	oldquiet = sb_be_quiet;	
-	sb_be_quiet = 1;
-	if(sb_dsp_init(hw_config, THIS_MODULE))
-	{
-		sb_be_quiet = oldquiet;
-		goto err_out_free;
-	}
-	sb_be_quiet = oldquiet;
-	
-	return 0;
-
-err_out_free:
-	kfree(hw_config);
-	return 1;
-}
-
-static void remove_one(struct pci_dev *pdev)
-{
-	struct address_info *hw_config = pci_get_drvdata(pdev);
-	sb_dsp_unload(hw_config, 0);
-	kfree(hw_config);
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio");
-MODULE_LICENSE("GPL");
-
-/*
- *	5530 only. The 5510/5520 decode is different.
- */
-
-static const struct pci_device_id id_tbl[] = {
-	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, id_tbl);
-
-static struct pci_driver kahlua_driver = {
-	.name		= "kahlua",
-	.id_table	= id_tbl,
-	.probe		= probe_one,
-	.remove		= remove_one,
-};
-
-
-static int __init kahlua_init_module(void)
-{
-	printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n");
-	return pci_register_driver(&kahlua_driver);
-}
-
-static void kahlua_cleanup_module(void)
-{
-	pci_unregister_driver(&kahlua_driver);
-}
-
-
-module_init(kahlua_init_module);
-module_exit(kahlua_cleanup_module);
-
diff --git a/sound/oss/midi_ctrl.h b/sound/oss/midi_ctrl.h
deleted file mode 100644
index 3353e5a67c24..000000000000
--- a/sound/oss/midi_ctrl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-static unsigned char ctrl_def_values[128] =
-{
-	0x40,0x00,0x40,0x40,  0x40,0x40,0x40,0x7f,	/*   0 to   7 */
-	0x40,0x40,0x40,0x7f,  0x40,0x40,0x40,0x40,	/*   8 to  15 */
-	0x40,0x40,0x40,0x40,  0x40,0x40,0x40,0x40,	/*  16 to  23 */
-	0x40,0x40,0x40,0x40,  0x40,0x40,0x40,0x40,	/*  24 to  31 */
-
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  32 to  39 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  40 to  47 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  48 to  55 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  56 to  63 */
-	
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  64 to  71 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  72 to  79 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  80 to  87 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/*  88 to  95 */
-
-	0x00,0x00,0x7f,0x7f,  0x7f,0x7f,0x00,0x00,	/*  96 to 103 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/* 104 to 111 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/* 112 to 119 */
-	0x00,0x00,0x00,0x00,  0x00,0x00,0x00,0x00,	/* 120 to 127 */
-};
diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c
deleted file mode 100644
index 2292c230d7e6..000000000000
--- a/sound/oss/midi_synth.c
+++ /dev/null
@@ -1,712 +0,0 @@
-/*
- * sound/oss/midi_synth.c
- *
- * High level midi sequencer manager for dumb MIDI interfaces.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Andrew Veliath  : fixed running status in MIDI input state machine
- */
-#define USE_SEQ_MACROS
-#define USE_SIMPLE_MACROS
-
-#include "sound_config.h"
-
-#define _MIDI_SYNTH_C_
-
-#include "midi_synth.h"
-
-static int      midi2synth[MAX_MIDI_DEV];
-static int      sysex_state[MAX_MIDI_DEV] =
-{0};
-static unsigned char prev_out_status[MAX_MIDI_DEV];
-
-#define STORE(cmd) \
-{ \
-  int len; \
-  unsigned char obuf[8]; \
-  cmd; \
-  seq_input_event(obuf, len); \
-}
-
-#define _seqbuf obuf
-#define _seqbufptr 0
-#define _SEQ_ADVBUF(x) len=x
-
-void
-do_midi_msg(int synthno, unsigned char *msg, int mlen)
-{
-	switch (msg[0] & 0xf0)
-	  {
-	  case 0x90:
-		  if (msg[2] != 0)
-		    {
-			    STORE(SEQ_START_NOTE(synthno, msg[0] & 0x0f, msg[1], msg[2]));
-			    break;
-		    }
-		  msg[2] = 64;
-
-	  case 0x80:
-		  STORE(SEQ_STOP_NOTE(synthno, msg[0] & 0x0f, msg[1], msg[2]));
-		  break;
-
-	  case 0xA0:
-		  STORE(SEQ_KEY_PRESSURE(synthno, msg[0] & 0x0f, msg[1], msg[2]));
-		  break;
-
-	  case 0xB0:
-		  STORE(SEQ_CONTROL(synthno, msg[0] & 0x0f,
-				    msg[1], msg[2]));
-		  break;
-
-	  case 0xC0:
-		  STORE(SEQ_SET_PATCH(synthno, msg[0] & 0x0f, msg[1]));
-		  break;
-
-	  case 0xD0:
-		  STORE(SEQ_CHN_PRESSURE(synthno, msg[0] & 0x0f, msg[1]));
-		  break;
-
-	  case 0xE0:
-		  STORE(SEQ_BENDER(synthno, msg[0] & 0x0f,
-			      (msg[1] & 0x7f) | ((msg[2] & 0x7f) << 7)));
-		  break;
-
-	  default:
-		  /* printk( "MPU: Unknown midi channel message %02x\n",  msg[0]); */
-		  ;
-	  }
-}
-EXPORT_SYMBOL(do_midi_msg);
-
-static void
-midi_outc(int midi_dev, int data)
-{
-	int             timeout;
-
-	for (timeout = 0; timeout < 3200; timeout++)
-		if (midi_devs[midi_dev]->outputc(midi_dev, (unsigned char) (data & 0xff)))
-		  {
-			  if (data & 0x80)	/*
-						 * Status byte
-						 */
-				  prev_out_status[midi_dev] =
-				      (unsigned char) (data & 0xff);	/*
-									 * Store for running status
-									 */
-			  return;	/*
-					 * Mission complete
-					 */
-		  }
-	/*
-	 * Sorry! No space on buffers.
-	 */
-	printk("Midi send timed out\n");
-}
-
-static int
-prefix_cmd(int midi_dev, unsigned char status)
-{
-	if ((char *) midi_devs[midi_dev]->prefix_cmd == NULL)
-		return 1;
-
-	return midi_devs[midi_dev]->prefix_cmd(midi_dev, status);
-}
-
-static void
-midi_synth_input(int orig_dev, unsigned char data)
-{
-	int             dev;
-	struct midi_input_info *inc;
-
-	static unsigned char len_tab[] =	/* # of data bytes following a status
-						 */
-	{
-		2,		/* 8x */
-		2,		/* 9x */
-		2,		/* Ax */
-		2,		/* Bx */
-		1,		/* Cx */
-		1,		/* Dx */
-		2,		/* Ex */
-		0		/* Fx */
-	};
-
-	if (orig_dev < 0 || orig_dev > num_midis || midi_devs[orig_dev] == NULL)
-		return;
-
-	if (data == 0xfe)	/* Ignore active sensing */
-		return;
-
-	dev = midi2synth[orig_dev];
-	inc = &midi_devs[orig_dev]->in_info;
-
-	switch (inc->m_state)
-	  {
-	  case MST_INIT:
-		  if (data & 0x80)	/* MIDI status byte */
-		    {
-			    if ((data & 0xf0) == 0xf0)	/* Common message */
-			      {
-				      switch (data)
-					{
-					case 0xf0:	/* Sysex */
-						inc->m_state = MST_SYSEX;
-						break;	/* Sysex */
-
-					case 0xf1:	/* MTC quarter frame */
-					case 0xf3:	/* Song select */
-						inc->m_state = MST_DATA;
-						inc->m_ptr = 1;
-						inc->m_left = 1;
-						inc->m_buf[0] = data;
-						break;
-
-					case 0xf2:	/* Song position pointer */
-						inc->m_state = MST_DATA;
-						inc->m_ptr = 1;
-						inc->m_left = 2;
-						inc->m_buf[0] = data;
-						break;
-
-					default:
-						inc->m_buf[0] = data;
-						inc->m_ptr = 1;
-						do_midi_msg(dev, inc->m_buf, inc->m_ptr);
-						inc->m_ptr = 0;
-						inc->m_left = 0;
-					}
-			    } else
-			      {
-				      inc->m_state = MST_DATA;
-				      inc->m_ptr = 1;
-				      inc->m_left = len_tab[(data >> 4) - 8];
-				      inc->m_buf[0] = inc->m_prev_status = data;
-			      }
-		    } else if (inc->m_prev_status & 0x80) {
-			    /* Data byte (use running status) */
-			    inc->m_ptr = 2;
-			    inc->m_buf[1] = data;
-			    inc->m_buf[0] = inc->m_prev_status;
-			    inc->m_left = len_tab[(inc->m_buf[0] >> 4) - 8] - 1;
-			    if (inc->m_left > 0)
-				    inc->m_state = MST_DATA; /* Not done yet */
-			    else {
-				    inc->m_state = MST_INIT;
-				    do_midi_msg(dev, inc->m_buf, inc->m_ptr);
-				    inc->m_ptr = 0;
-			    }
-		    }
-		  break;	/* MST_INIT */
-
-	  case MST_DATA:
-		  inc->m_buf[inc->m_ptr++] = data;
-		  if (--inc->m_left <= 0)
-		    {
-			    inc->m_state = MST_INIT;
-			    do_midi_msg(dev, inc->m_buf, inc->m_ptr);
-			    inc->m_ptr = 0;
-		    }
-		  break;	/* MST_DATA */
-
-	  case MST_SYSEX:
-		  if (data == 0xf7)	/* Sysex end */
-		    {
-			    inc->m_state = MST_INIT;
-			    inc->m_left = 0;
-			    inc->m_ptr = 0;
-		    }
-		  break;	/* MST_SYSEX */
-
-	  default:
-		  printk("MIDI%d: Unexpected state %d (%02x)\n", orig_dev, inc->m_state, (int) data);
-		  inc->m_state = MST_INIT;
-	  }
-}
-
-static void
-leave_sysex(int dev)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             timeout = 0;
-
-	if (!sysex_state[dev])
-		return;
-
-	sysex_state[dev] = 0;
-
-	while (!midi_devs[orig_dev]->outputc(orig_dev, 0xf7) &&
-	       timeout < 1000)
-		timeout++;
-
-	sysex_state[dev] = 0;
-}
-
-static void
-midi_synth_output(int dev)
-{
-	/*
-	 * Currently NOP
-	 */
-}
-
-int midi_synth_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	/*
-	 * int orig_dev = synth_devs[dev]->midi_dev;
-	 */
-
-	switch (cmd) {
-
-	case SNDCTL_SYNTH_INFO:
-		if (__copy_to_user(arg, synth_devs[dev]->info, sizeof(struct synth_info)))
-			return -EFAULT;
-		return 0;
-		
-	case SNDCTL_SYNTH_MEMAVL:
-		return 0x7fffffff;
-
-	default:
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(midi_synth_ioctl);
-
-int
-midi_synth_kill_note(int dev, int channel, int note, int velocity)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             msg, chn;
-
-	if (note < 0 || note > 127)
-		return 0;
-	if (channel < 0 || channel > 15)
-		return 0;
-	if (velocity < 0)
-		velocity = 0;
-	if (velocity > 127)
-		velocity = 127;
-
-	leave_sysex(dev);
-
-	msg = prev_out_status[orig_dev] & 0xf0;
-	chn = prev_out_status[orig_dev] & 0x0f;
-
-	if (chn == channel && ((msg == 0x90 && velocity == 64) || msg == 0x80))
-	  {			/*
-				 * Use running status
-				 */
-		  if (!prefix_cmd(orig_dev, note))
-			  return 0;
-
-		  midi_outc(orig_dev, note);
-
-		  if (msg == 0x90)	/*
-					 * Running status = Note on
-					 */
-			  midi_outc(orig_dev, 0);	/*
-							   * Note on with velocity 0 == note
-							   * off
-							 */
-		  else
-			  midi_outc(orig_dev, velocity);
-	} else
-	  {
-		  if (velocity == 64)
-		    {
-			    if (!prefix_cmd(orig_dev, 0x90 | (channel & 0x0f)))
-				    return 0;
-			    midi_outc(orig_dev, 0x90 | (channel & 0x0f));	/*
-										 * Note on
-										 */
-			    midi_outc(orig_dev, note);
-			    midi_outc(orig_dev, 0);	/*
-							 * Zero G
-							 */
-		  } else
-		    {
-			    if (!prefix_cmd(orig_dev, 0x80 | (channel & 0x0f)))
-				    return 0;
-			    midi_outc(orig_dev, 0x80 | (channel & 0x0f));	/*
-										 * Note off
-										 */
-			    midi_outc(orig_dev, note);
-			    midi_outc(orig_dev, velocity);
-		    }
-	  }
-
-	return 0;
-}
-EXPORT_SYMBOL(midi_synth_kill_note);
-
-int
-midi_synth_set_instr(int dev, int channel, int instr_no)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-
-	if (instr_no < 0 || instr_no > 127)
-		instr_no = 0;
-	if (channel < 0 || channel > 15)
-		return 0;
-
-	leave_sysex(dev);
-
-	if (!prefix_cmd(orig_dev, 0xc0 | (channel & 0x0f)))
-		return 0;
-	midi_outc(orig_dev, 0xc0 | (channel & 0x0f));	/*
-							 * Program change
-							 */
-	midi_outc(orig_dev, instr_no);
-
-	return 0;
-}
-EXPORT_SYMBOL(midi_synth_set_instr);
-
-int
-midi_synth_start_note(int dev, int channel, int note, int velocity)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             msg, chn;
-
-	if (note < 0 || note > 127)
-		return 0;
-	if (channel < 0 || channel > 15)
-		return 0;
-	if (velocity < 0)
-		velocity = 0;
-	if (velocity > 127)
-		velocity = 127;
-
-	leave_sysex(dev);
-
-	msg = prev_out_status[orig_dev] & 0xf0;
-	chn = prev_out_status[orig_dev] & 0x0f;
-
-	if (chn == channel && msg == 0x90)
-	  {			/*
-				 * Use running status
-				 */
-		  if (!prefix_cmd(orig_dev, note))
-			  return 0;
-		  midi_outc(orig_dev, note);
-		  midi_outc(orig_dev, velocity);
-	} else
-	  {
-		  if (!prefix_cmd(orig_dev, 0x90 | (channel & 0x0f)))
-			  return 0;
-		  midi_outc(orig_dev, 0x90 | (channel & 0x0f));		/*
-									 * Note on
-									 */
-		  midi_outc(orig_dev, note);
-		  midi_outc(orig_dev, velocity);
-	  }
-	return 0;
-}
-EXPORT_SYMBOL(midi_synth_start_note);
-
-void
-midi_synth_reset(int dev)
-{
-
-	leave_sysex(dev);
-}
-EXPORT_SYMBOL(midi_synth_reset);
-
-int
-midi_synth_open(int dev, int mode)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             err;
-	struct midi_input_info *inc;
-
-	if (orig_dev < 0 || orig_dev >= num_midis || midi_devs[orig_dev] == NULL)
-		return -ENXIO;
-
-	midi2synth[orig_dev] = dev;
-	sysex_state[dev] = 0;
-	prev_out_status[orig_dev] = 0;
-
-	if ((err = midi_devs[orig_dev]->open(orig_dev, mode,
-			       midi_synth_input, midi_synth_output)) < 0)
-		return err;
-	inc = &midi_devs[orig_dev]->in_info;
-
-	/* save_flags(flags);
-	cli(); 
-	don't know against what irqhandler to protect*/
-	inc->m_busy = 0;
-	inc->m_state = MST_INIT;
-	inc->m_ptr = 0;
-	inc->m_left = 0;
-	inc->m_prev_status = 0x00;
-	/* restore_flags(flags); */
-
-	return 1;
-}
-EXPORT_SYMBOL(midi_synth_open);
-
-void
-midi_synth_close(int dev)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-
-	leave_sysex(dev);
-
-	/*
-	 * Shut up the synths by sending just single active sensing message.
-	 */
-	midi_devs[orig_dev]->outputc(orig_dev, 0xfe);
-
-	midi_devs[orig_dev]->close(orig_dev);
-}
-EXPORT_SYMBOL(midi_synth_close);
-
-void
-midi_synth_hw_control(int dev, unsigned char *event)
-{
-}
-EXPORT_SYMBOL(midi_synth_hw_control);
-
-int
-midi_synth_load_patch(int dev, int format, const char __user *addr,
-		      int count, int pmgr_flag)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-
-	struct sysex_info sysex;
-	int             i;
-	unsigned long   left, src_offs, eox_seen = 0;
-	int             first_byte = 1;
-	int             hdr_size = (unsigned long) &sysex.data[0] - (unsigned long) &sysex;
-
-	leave_sysex(dev);
-
-	if (!prefix_cmd(orig_dev, 0xf0))
-		return 0;
-
-	/* Invalid patch format */
-	if (format != SYSEX_PATCH)
-		  return -EINVAL;
-
-	/* Patch header too short */
-	if (count < hdr_size)
-		return -EINVAL;
-
-	count -= hdr_size;
-
-	/*
-	 * Copy the header from user space
-	 */
-
-	if (copy_from_user(&sysex, addr, hdr_size))
-		return -EFAULT;
-
-	/* Sysex record too short */
-	if ((unsigned)count < (unsigned)sysex.len)
-		sysex.len = count;
-
-	left = sysex.len;
-	src_offs = 0;
-
-	for (i = 0; i < left && !signal_pending(current); i++)
-	{
-		unsigned char   data;
-
-		if (get_user(data,
-		    (unsigned char __user *)(addr + hdr_size + i)))
-			return -EFAULT;
-
-		eox_seen = (i > 0 && data & 0x80);	/* End of sysex */
-
-		if (eox_seen && data != 0xf7)
-			data = 0xf7;
-
-		if (i == 0)
-		{
-			if (data != 0xf0)
-			{
-				printk(KERN_WARNING "midi_synth: Sysex start missing\n");
-				return -EINVAL;
-			}
-		}
-		while (!midi_devs[orig_dev]->outputc(orig_dev, (unsigned char) (data & 0xff)) &&
-			!signal_pending(current))
-			schedule();
-
-		if (!first_byte && data & 0x80)
-			return 0;
-		first_byte = 0;
-	}
-
-	if (!eox_seen)
-		midi_outc(orig_dev, 0xf7);
-	return 0;
-}
-EXPORT_SYMBOL(midi_synth_load_patch);
-
-void midi_synth_panning(int dev, int channel, int pressure)
-{
-}
-EXPORT_SYMBOL(midi_synth_panning);
-
-void midi_synth_aftertouch(int dev, int channel, int pressure)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             msg, chn;
-
-	if (pressure < 0 || pressure > 127)
-		return;
-	if (channel < 0 || channel > 15)
-		return;
-
-	leave_sysex(dev);
-
-	msg = prev_out_status[orig_dev] & 0xf0;
-	chn = prev_out_status[orig_dev] & 0x0f;
-
-	if (msg != 0xd0 || chn != channel)	/*
-						 * Test for running status
-						 */
-	  {
-		  if (!prefix_cmd(orig_dev, 0xd0 | (channel & 0x0f)))
-			  return;
-		  midi_outc(orig_dev, 0xd0 | (channel & 0x0f));		/*
-									 * Channel pressure
-									 */
-	} else if (!prefix_cmd(orig_dev, pressure))
-		return;
-
-	midi_outc(orig_dev, pressure);
-}
-EXPORT_SYMBOL(midi_synth_aftertouch);
-
-void
-midi_synth_controller(int dev, int channel, int ctrl_num, int value)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             chn, msg;
-
-	if (ctrl_num < 0 || ctrl_num > 127)
-		return;
-	if (channel < 0 || channel > 15)
-		return;
-
-	leave_sysex(dev);
-
-	msg = prev_out_status[orig_dev] & 0xf0;
-	chn = prev_out_status[orig_dev] & 0x0f;
-
-	if (msg != 0xb0 || chn != channel)
-	  {
-		  if (!prefix_cmd(orig_dev, 0xb0 | (channel & 0x0f)))
-			  return;
-		  midi_outc(orig_dev, 0xb0 | (channel & 0x0f));
-	} else if (!prefix_cmd(orig_dev, ctrl_num))
-		return;
-
-	midi_outc(orig_dev, ctrl_num);
-	midi_outc(orig_dev, value & 0x7f);
-}
-EXPORT_SYMBOL(midi_synth_controller);
-
-void
-midi_synth_bender(int dev, int channel, int value)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             msg, prev_chn;
-
-	if (channel < 0 || channel > 15)
-		return;
-
-	if (value < 0 || value > 16383)
-		return;
-
-	leave_sysex(dev);
-
-	msg = prev_out_status[orig_dev] & 0xf0;
-	prev_chn = prev_out_status[orig_dev] & 0x0f;
-
-	if (msg != 0xd0 || prev_chn != channel)		/*
-							 * Test for running status
-							 */
-	  {
-		  if (!prefix_cmd(orig_dev, 0xe0 | (channel & 0x0f)))
-			  return;
-		  midi_outc(orig_dev, 0xe0 | (channel & 0x0f));
-	} else if (!prefix_cmd(orig_dev, value & 0x7f))
-		return;
-
-	midi_outc(orig_dev, value & 0x7f);
-	midi_outc(orig_dev, (value >> 7) & 0x7f);
-}
-EXPORT_SYMBOL(midi_synth_bender);
-
-void
-midi_synth_setup_voice(int dev, int voice, int channel)
-{
-}
-EXPORT_SYMBOL(midi_synth_setup_voice);
-
-int
-midi_synth_send_sysex(int dev, unsigned char *bytes, int len)
-{
-	int             orig_dev = synth_devs[dev]->midi_dev;
-	int             i;
-
-	for (i = 0; i < len; i++)
-	  {
-		  switch (bytes[i])
-		    {
-		    case 0xf0:	/* Start sysex */
-			    if (!prefix_cmd(orig_dev, 0xf0))
-				    return 0;
-			    sysex_state[dev] = 1;
-			    break;
-
-		    case 0xf7:	/* End sysex */
-			    if (!sysex_state[dev])	/* Orphan sysex end */
-				    return 0;
-			    sysex_state[dev] = 0;
-			    break;
-
-		    default:
-			    if (!sysex_state[dev])
-				    return 0;
-
-			    if (bytes[i] & 0x80)	/* Error. Another message before sysex end */
-			      {
-				      bytes[i] = 0xf7;	/* Sysex end */
-				      sysex_state[dev] = 0;
-			      }
-		    }
-
-		  if (!midi_devs[orig_dev]->outputc(orig_dev, bytes[i]))
-		    {
-/*
- * Hardware level buffer is full. Abort the sysex message.
- */
-
-			    int             timeout = 0;
-
-			    bytes[i] = 0xf7;
-			    sysex_state[dev] = 0;
-
-			    while (!midi_devs[orig_dev]->outputc(orig_dev, bytes[i]) &&
-				   timeout < 1000)
-				    timeout++;
-		    }
-		  if (!sysex_state[dev])
-			  return 0;
-	  }
-
-	return 0;
-}
-EXPORT_SYMBOL(midi_synth_send_sysex);
-
diff --git a/sound/oss/midi_synth.h b/sound/oss/midi_synth.h
deleted file mode 100644
index b64ddd6c4abc..000000000000
--- a/sound/oss/midi_synth.h
+++ /dev/null
@@ -1,47 +0,0 @@
-int midi_synth_ioctl (int dev,
-	    unsigned int cmd, void __user * arg);
-int midi_synth_kill_note (int dev, int channel, int note, int velocity);
-int midi_synth_set_instr (int dev, int channel, int instr_no);
-int midi_synth_start_note (int dev, int channel, int note, int volume);
-void midi_synth_reset (int dev);
-int midi_synth_open (int dev, int mode);
-void midi_synth_close (int dev);
-void midi_synth_hw_control (int dev, unsigned char *event);
-int midi_synth_load_patch (int dev, int format, const char __user * addr,
-		 int count, int pmgr_flag);
-void midi_synth_panning (int dev, int channel, int pressure);
-void midi_synth_aftertouch (int dev, int channel, int pressure);
-void midi_synth_controller (int dev, int channel, int ctrl_num, int value);
-void midi_synth_bender (int dev, int chn, int value);
-void midi_synth_setup_voice (int dev, int voice, int chn);
-int midi_synth_send_sysex(int dev, unsigned char *bytes,int len);
-
-#ifndef _MIDI_SYNTH_C_
-static struct synth_info std_synth_info =
-{MIDI_SYNTH_NAME, 0, SYNTH_TYPE_MIDI, 0, 0, 128, 0, 128, MIDI_SYNTH_CAPS};
-
-static struct synth_operations std_midi_synth =
-{
-	.owner		= THIS_MODULE,
-	.id		= "MIDI",
-	.info		= &std_synth_info,
-	.midi_dev	= 0,
-	.synth_type	= SYNTH_TYPE_MIDI,
-	.synth_subtype	= 0,
-	.open		= midi_synth_open,
-	.close		= midi_synth_close,
-	.ioctl		= midi_synth_ioctl,
-	.kill_note	= midi_synth_kill_note,
-	.start_note	= midi_synth_start_note,
-	.set_instr	= midi_synth_set_instr,
-	.reset		= midi_synth_reset,
-	.hw_control	= midi_synth_hw_control,
-	.load_patch	= midi_synth_load_patch,
-	.aftertouch	= midi_synth_aftertouch,
-	.controller	= midi_synth_controller,
-	.panning		= midi_synth_panning,
-	.bender		= midi_synth_bender,
-	.setup_voice	= midi_synth_setup_voice,
-	.send_sysex	= midi_synth_send_sysex
-};
-#endif
diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
deleted file mode 100644
index 701c7625c971..000000000000
--- a/sound/oss/midibuf.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * sound/oss/midibuf.c
- *
- * Device file manager for /dev/midi#
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- */
-#include <linux/stddef.h>
-#include <linux/kmod.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-
-#define MIDIBUF_C
-
-#include "sound_config.h"
-
-
-/*
- * Don't make MAX_QUEUE_SIZE larger than 4000
- */
-
-#define MAX_QUEUE_SIZE	4000
-
-static wait_queue_head_t midi_sleeper[MAX_MIDI_DEV];
-static wait_queue_head_t input_sleeper[MAX_MIDI_DEV];
-
-struct midi_buf
-{
-	int len, head, tail;
-	unsigned char queue[MAX_QUEUE_SIZE];
-};
-
-struct midi_parms
-{
-	long prech_timeout;	/*
-				 * Timeout before the first ch
-				 */
-};
-
-static struct midi_buf *midi_out_buf[MAX_MIDI_DEV] = {NULL};
-static struct midi_buf *midi_in_buf[MAX_MIDI_DEV] = {NULL};
-static struct midi_parms parms[MAX_MIDI_DEV];
-
-static void midi_poll(unsigned long dummy);
-
-
-static DEFINE_TIMER(poll_timer, midi_poll, 0, 0);
-
-static volatile int open_devs;
-static DEFINE_SPINLOCK(lock);
-
-#define DATA_AVAIL(q) (q->len)
-#define SPACE_AVAIL(q) (MAX_QUEUE_SIZE - q->len)
-
-#define QUEUE_BYTE(q, data) \
-	if (SPACE_AVAIL(q)) \
-	{ \
-	  unsigned long flags; \
-	  spin_lock_irqsave(&lock, flags); \
-	  q->queue[q->tail] = (data); \
-	  q->len++; q->tail = (q->tail+1) % MAX_QUEUE_SIZE; \
-	  spin_unlock_irqrestore(&lock, flags); \
-	}
-
-#define REMOVE_BYTE(q, data) \
-	if (DATA_AVAIL(q)) \
-	{ \
-	  unsigned long flags; \
-	  spin_lock_irqsave(&lock, flags); \
-	  data = q->queue[q->head]; \
-	  q->len--; q->head = (q->head+1) % MAX_QUEUE_SIZE; \
-	  spin_unlock_irqrestore(&lock, flags); \
-	}
-
-static void drain_midi_queue(int dev)
-{
-
-	/*
-	 * Give the Midi driver time to drain its output queues
-	 */
-
-	if (midi_devs[dev]->buffer_status != NULL)
-		wait_event_interruptible_timeout(midi_sleeper[dev],
-				!midi_devs[dev]->buffer_status(dev), HZ/10);
-}
-
-static void midi_input_intr(int dev, unsigned char data)
-{
-	if (midi_in_buf[dev] == NULL)
-		return;
-
-	if (data == 0xfe)	/*
-				 * Active sensing
-				 */
-		return;		/*
-				 * Ignore
-				 */
-
-	if (SPACE_AVAIL(midi_in_buf[dev])) {
-		QUEUE_BYTE(midi_in_buf[dev], data);
-		wake_up(&input_sleeper[dev]);
-	}
-}
-
-static void midi_output_intr(int dev)
-{
-	/*
-	 * Currently NOP
-	 */
-}
-
-static void midi_poll(unsigned long dummy)
-{
-	unsigned long   flags;
-	int             dev;
-
-	spin_lock_irqsave(&lock, flags);
-	if (open_devs)
-	{
-		for (dev = 0; dev < num_midis; dev++)
-			if (midi_devs[dev] != NULL && midi_out_buf[dev] != NULL)
-			{
-				while (DATA_AVAIL(midi_out_buf[dev]))
-				{
-					int ok;
-					int c = midi_out_buf[dev]->queue[midi_out_buf[dev]->head];
-
-					spin_unlock_irqrestore(&lock,flags);/* Give some time to others */
-					ok = midi_devs[dev]->outputc(dev, c);
-					spin_lock_irqsave(&lock, flags);
-					if (!ok)
-						break;
-					midi_out_buf[dev]->head = (midi_out_buf[dev]->head + 1) % MAX_QUEUE_SIZE;
-					midi_out_buf[dev]->len--;
-				}
-
-				if (DATA_AVAIL(midi_out_buf[dev]) < 100)
-					wake_up(&midi_sleeper[dev]);
-			}
-		poll_timer.expires = (1) + jiffies;
-		add_timer(&poll_timer);
-		/*
-		 * Come back later
-		 */
-	}
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-int MIDIbuf_open(int dev, struct file *file)
-{
-	int mode, err;
-
-	dev = dev >> 4;
-	mode = translate_mode(file);
-
-	if (num_midis > MAX_MIDI_DEV)
-	{
-		printk(KERN_ERR "midi: Too many midi interfaces\n");
-		num_midis = MAX_MIDI_DEV;
-	}
-	if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
-		  return -ENXIO;
-	/*
-	 *    Interrupts disabled. Be careful
-	 */
-
-	module_put(midi_devs[dev]->owner);
-
-	if ((err = midi_devs[dev]->open(dev, mode,
-				 midi_input_intr, midi_output_intr)) < 0)
-		return err;
-
-	parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT;
-	midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf));
-
-	if (midi_in_buf[dev] == NULL)
-	{
-		printk(KERN_WARNING "midi: Can't allocate buffer\n");
-		midi_devs[dev]->close(dev);
-		return -EIO;
-	}
-	midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0;
-
-	midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf));
-
-	if (midi_out_buf[dev] == NULL)
-	{
-		printk(KERN_WARNING "midi: Can't allocate buffer\n");
-		midi_devs[dev]->close(dev);
-		vfree(midi_in_buf[dev]);
-		midi_in_buf[dev] = NULL;
-		return -EIO;
-	}
-	midi_out_buf[dev]->len = midi_out_buf[dev]->head = midi_out_buf[dev]->tail = 0;
-	open_devs++;
-
-	init_waitqueue_head(&midi_sleeper[dev]);
-	init_waitqueue_head(&input_sleeper[dev]);
-
-	if (open_devs < 2)	/* This was first open */
-	{
-		poll_timer.expires = 1 + jiffies;
-		add_timer(&poll_timer);	/* Start polling */
-	}
-	return err;
-}
-
-void MIDIbuf_release(int dev, struct file *file)
-{
-	int mode;
-
-	dev = dev >> 4;
-	mode = translate_mode(file);
-
-	if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
-		return;
-
-	/*
-	 * Wait until the queue is empty
-	 */
-
-	if (mode != OPEN_READ)
-	{
-		midi_devs[dev]->outputc(dev, 0xfe);	/*
-							   * Active sensing to shut the
-							   * devices
-							 */
-
-		wait_event_interruptible(midi_sleeper[dev],
-					 !DATA_AVAIL(midi_out_buf[dev]));
-		/*
-		 *	Sync
-		 */
-
-		drain_midi_queue(dev);	/*
-					 * Ensure the output queues are empty
-					 */
-	}
-
-	midi_devs[dev]->close(dev);
-
-	open_devs--;
-	if (open_devs == 0)
-		del_timer_sync(&poll_timer);
-	vfree(midi_in_buf[dev]);
-	vfree(midi_out_buf[dev]);
-	midi_in_buf[dev] = NULL;
-	midi_out_buf[dev] = NULL;
-
-	module_put(midi_devs[dev]->owner);
-}
-
-int MIDIbuf_write(int dev, struct file *file, const char __user *buf, int count)
-{
-	int c, n, i;
-	unsigned char tmp_data;
-
-	dev = dev >> 4;
-
-	if (!count)
-		return 0;
-
-	c = 0;
-
-	while (c < count)
-	{
-		n = SPACE_AVAIL(midi_out_buf[dev]);
-
-		if (n == 0) {	/*
-				 * No space just now.
-				 */
-
-			if (file->f_flags & O_NONBLOCK) {
-				c = -EAGAIN;
-				goto out;
-			}
-
-			if (wait_event_interruptible(midi_sleeper[dev],
-						SPACE_AVAIL(midi_out_buf[dev])))
-			{
-				c = -EINTR;
-				goto out;
-			}
-			n = SPACE_AVAIL(midi_out_buf[dev]);
-		}
-		if (n > (count - c))
-			n = count - c;
-
-		for (i = 0; i < n; i++)
-		{
-			/* BROKE BROKE BROKE - CAN'T DO THIS WITH CLI !! */
-			/* yes, think the same, so I removed the cli() brackets 
-				QUEUE_BYTE is protected against interrupts */
-			if (copy_from_user((char *) &tmp_data, &(buf)[c], 1)) {
-				c = -EFAULT;
-				goto out;
-			}
-			QUEUE_BYTE(midi_out_buf[dev], tmp_data);
-			c++;
-		}
-	}
-out:
-	return c;
-}
-
-
-int MIDIbuf_read(int dev, struct file *file, char __user *buf, int count)
-{
-	int n, c = 0;
-	unsigned char tmp_data;
-
-	dev = dev >> 4;
-
-	if (!DATA_AVAIL(midi_in_buf[dev])) {	/*
-						 * No data yet, wait
-						 */
- 		if (file->f_flags & O_NONBLOCK) {
- 			c = -EAGAIN;
-			goto out;
- 		}
-		wait_event_interruptible_timeout(input_sleeper[dev],
-						 DATA_AVAIL(midi_in_buf[dev]),
-						 parms[dev].prech_timeout);
-
-		if (signal_pending(current))
-			c = -EINTR;	/* The user is getting restless */
-	}
-	if (c == 0 && DATA_AVAIL(midi_in_buf[dev]))	/*
-							 * Got some bytes
-							 */
-	{
-		n = DATA_AVAIL(midi_in_buf[dev]);
-		if (n > count)
-			n = count;
-		c = 0;
-
-		while (c < n)
-		{
-			char *fixit;
-			REMOVE_BYTE(midi_in_buf[dev], tmp_data);
-			fixit = (char *) &tmp_data;
-			/* BROKE BROKE BROKE */
-			/* yes removed the cli() brackets again
-			 should q->len,tail&head be atomic_t? */
-			if (copy_to_user(&(buf)[c], fixit, 1)) {
-				c = -EFAULT;
-				goto out;
-			}
-			c++;
-		}
-	}
-out:
-	return c;
-}
-
-int MIDIbuf_ioctl(int dev, struct file *file,
-		  unsigned int cmd, void __user *arg)
-{
-	int val;
-
-	dev = dev >> 4;
-	
-	if (((cmd >> 8) & 0xff) == 'C') 
-	{
-		if (midi_devs[dev]->coproc)	/* Coprocessor ioctl */
-			return midi_devs[dev]->coproc->ioctl(midi_devs[dev]->coproc->devc, cmd, arg, 0);
-/*		printk("/dev/midi%d: No coprocessor for this device\n", dev);*/
-		return -ENXIO;
-	}
-	else
-	{
-		switch (cmd) 
-		{
-			case SNDCTL_MIDI_PRETIME:
-				if (get_user(val, (int __user *)arg))
-					return -EFAULT;
-				if (val < 0)
-					val = 0;
-				val = (HZ * val) / 10;
-				parms[dev].prech_timeout = val;
-				return put_user(val, (int __user *)arg);
-			
-			default:
-				if (!midi_devs[dev]->ioctl)
-					return -EINVAL;
-				return midi_devs[dev]->ioctl(dev, cmd, arg);
-		}
-	}
-}
-
-/* No kernel lock - fine */
-unsigned int MIDIbuf_poll(int dev, struct file *file, poll_table * wait)
-{
-	unsigned int mask = 0;
-
-	dev = dev >> 4;
-
-	/* input */
-	poll_wait(file, &input_sleeper[dev], wait);
-	if (DATA_AVAIL(midi_in_buf[dev]))
-		mask |= POLLIN | POLLRDNORM;
-
-	/* output */
-	poll_wait(file, &midi_sleeper[dev], wait);
-	if (!SPACE_AVAIL(midi_out_buf[dev]))
-		mask |= POLLOUT | POLLWRNORM;
-	
-	return mask;
-}
-
-
-int MIDIbuf_avail(int dev)
-{
-	if (midi_in_buf[dev])
-		return DATA_AVAIL (midi_in_buf[dev]);
-	return 0;
-}
-EXPORT_SYMBOL(MIDIbuf_avail);
-
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
deleted file mode 100644
index 20e8fa46f647..000000000000
--- a/sound/oss/mpu401.c
+++ /dev/null
@@ -1,1804 +0,0 @@
-/*
- * sound/oss/mpu401.c
- *
- * The low level driver for Roland MPU-401 compatible Midi cards.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer	ioctl code reworked (vmalloc/vfree removed)
- * Alan Cox		modularisation, use normal request_irq, use dev_id
- * Bartlomiej Zolnierkiewicz	removed some __init to allow using many drivers
- * Chris Rankin		Update the module-usage counter for the coprocessor
- * Zwane Mwaikambo	Changed attach/unload resource freeing
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#define USE_SEQ_MACROS
-#define USE_SIMPLE_MACROS
-
-#include "sound_config.h"
-
-#include "coproc.h"
-#include "mpu401.h"
-
-static int      timer_mode = TMR_INTERNAL, timer_caps = TMR_INTERNAL;
-
-struct mpu_config
-{
-	int             base;	/*
-				 * I/O base
-				 */
-	int             irq;
-	int             opened;	/*
-				 * Open mode
-				 */
-	int             devno;
-	int             synthno;
-	int             uart_mode;
-	int             initialized;
-	int             mode;
-#define MODE_MIDI	1
-#define MODE_SYNTH	2
-	unsigned char   version, revision;
-	unsigned int    capabilities;
-#define MPU_CAP_INTLG	0x10000000
-#define MPU_CAP_SYNC	0x00000010
-#define MPU_CAP_FSK	0x00000020
-#define MPU_CAP_CLS	0x00000040
-#define MPU_CAP_SMPTE 	0x00000080
-#define MPU_CAP_2PORT	0x00000001
-	int             timer_flag;
-
-#define MBUF_MAX	10
-#define BUFTEST(dc) if (dc->m_ptr >= MBUF_MAX || dc->m_ptr < 0) \
-	{printk( "MPU: Invalid buffer pointer %d/%d, s=%d\n",  dc->m_ptr,  dc->m_left,  dc->m_state);dc->m_ptr--;}
-	  int             m_busy;
-	  unsigned char   m_buf[MBUF_MAX];
-	  int             m_ptr;
-	  int             m_state;
-	  int             m_left;
-	  unsigned char   last_status;
-	  void            (*inputintr) (int dev, unsigned char data);
-	  int             shared_irq;
-	  int            *osp;
-	  spinlock_t	lock;
-  };
-
-#define	DATAPORT(base)   (base)
-#define	COMDPORT(base)   (base+1)
-#define	STATPORT(base)   (base+1)
-
-
-static void mpu401_close(int dev);
-
-static inline int mpu401_status(struct mpu_config *devc)
-{
-	return inb(STATPORT(devc->base));
-}
-
-#define input_avail(devc)		(!(mpu401_status(devc)&INPUT_AVAIL))
-#define output_ready(devc)		(!(mpu401_status(devc)&OUTPUT_READY))
-
-static inline void write_command(struct mpu_config *devc, unsigned char cmd)
-{
-	outb(cmd, COMDPORT(devc->base));
-}
-
-static inline int read_data(struct mpu_config *devc)
-{
-	return inb(DATAPORT(devc->base));
-}
-
-static inline void write_data(struct mpu_config *devc, unsigned char byte)
-{
-	outb(byte, DATAPORT(devc->base));
-}
-
-#define	OUTPUT_READY	0x40
-#define	INPUT_AVAIL	0x80
-#define	MPU_ACK		0xFE
-#define	MPU_RESET	0xFF
-#define	UART_MODE_ON	0x3F
-
-static struct mpu_config dev_conf[MAX_MIDI_DEV];
-
-static int n_mpu_devs;
-
-static int reset_mpu401(struct mpu_config *devc);
-static void set_uart_mode(int dev, struct mpu_config *devc, int arg);
-
-static int mpu_timer_init(int midi_dev);
-static void mpu_timer_interrupt(void);
-static void timer_ext_event(struct mpu_config *devc, int event, int parm);
-
-static struct synth_info mpu_synth_info_proto = {
-	"MPU-401 MIDI interface", 
-	0, 
-	SYNTH_TYPE_MIDI, 
-	MIDI_TYPE_MPU401, 
-	0, 128, 
-	0, 128, 
-	SYNTH_CAP_INPUT
-};
-
-static struct synth_info mpu_synth_info[MAX_MIDI_DEV];
-
-/*
- * States for the input scanner
- */
-
-#define ST_INIT			0	/* Ready for timing byte or msg */
-#define ST_TIMED		1	/* Leading timing byte rcvd */
-#define ST_DATABYTE		2	/* Waiting for (nr_left) data bytes */
-
-#define ST_SYSMSG		100	/* System message (sysx etc). */
-#define ST_SYSEX		101	/* System exclusive msg */
-#define ST_MTC			102	/* Midi Time Code (MTC) qframe msg */
-#define ST_SONGSEL		103	/* Song select */
-#define ST_SONGPOS		104	/* Song position pointer */
-
-static unsigned char len_tab[] =	/* # of data bytes following a status
-					 */
-{
-	2,			/* 8x */
-	2,			/* 9x */
-	2,			/* Ax */
-	2,			/* Bx */
-	1,			/* Cx */
-	1,			/* Dx */
-	2,			/* Ex */
-	0			/* Fx */
-};
-
-#define STORE(cmd) \
-{ \
-	int len; \
-	unsigned char obuf[8]; \
-	cmd; \
-	seq_input_event(obuf, len); \
-}
-
-#define _seqbuf obuf
-#define _seqbufptr 0
-#define _SEQ_ADVBUF(x) len=x
-
-static int mpu_input_scanner(struct mpu_config *devc, unsigned char midic)
-{
-
-	switch (devc->m_state)
-	{
-		case ST_INIT:
-			switch (midic)
-			{
-				case 0xf8:
-				/* Timer overflow */
-					break;
-
-				case 0xfc:
-					printk("<all end>");
-			 		break;
-
-				case 0xfd:
-					if (devc->timer_flag)
-						mpu_timer_interrupt();
-					break;
-
-				case 0xfe:
-					return MPU_ACK;
-
-				case 0xf0:
-				case 0xf1:
-				case 0xf2:
-				case 0xf3:
-				case 0xf4:
-				case 0xf5:
-				case 0xf6:
-				case 0xf7:
-					printk("<Trk data rq #%d>", midic & 0x0f);
-					break;
-
-				case 0xf9:
-					printk("<conductor rq>");
-					break;
-
-				case 0xff:
-					devc->m_state = ST_SYSMSG;
-					break;
-
-				default:
-					if (midic <= 0xef)
-					{
-						/* printk( "mpu time: %d ",  midic); */
-						devc->m_state = ST_TIMED;
-					}
-					else
-						printk("<MPU: Unknown event %02x> ", midic);
-			}
-			break;
-
-		case ST_TIMED:
-			{
-				int msg = ((int) (midic & 0xf0) >> 4);
-
-				devc->m_state = ST_DATABYTE;
-
-				if (msg < 8)	/* Data byte */
-				{
-					/* printk( "midi msg (running status) "); */
-					msg = ((int) (devc->last_status & 0xf0) >> 4);
-					msg -= 8;
-					devc->m_left = len_tab[msg] - 1;
-
-					devc->m_ptr = 2;
-					devc->m_buf[0] = devc->last_status;
-					devc->m_buf[1] = midic;
-
-					if (devc->m_left <= 0)
-					{
-						devc->m_state = ST_INIT;
-						do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
-						devc->m_ptr = 0;
-					}
-				}
-				else if (msg == 0xf)	/* MPU MARK */
-				{
-					devc->m_state = ST_INIT;
-
-					switch (midic)
-					{
-						case 0xf8:
-							/* printk( "NOP "); */
-							break;
-
-						case 0xf9:
-							/* printk( "meas end "); */
-							break;
-
-						case 0xfc:
-							/* printk( "data end "); */
-							break;
-
-						default:
-							printk("Unknown MPU mark %02x\n", midic);
-					}
-				}
-				else
-				{
-					devc->last_status = midic;
-					/* printk( "midi msg "); */
-					msg -= 8;
-					devc->m_left = len_tab[msg];
-
-					devc->m_ptr = 1;
-					devc->m_buf[0] = midic;
-
-					if (devc->m_left <= 0)
-					{
-						devc->m_state = ST_INIT;
-						do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
-						devc->m_ptr = 0;
-					}
-				}
-			}
-			break;
-
-		case ST_SYSMSG:
-			switch (midic)
-			{
-				case 0xf0:
-					printk("<SYX>");
-					devc->m_state = ST_SYSEX;
-					break;
-
-				case 0xf1:
-					devc->m_state = ST_MTC;
-					break;
-
-				case 0xf2:
-					devc->m_state = ST_SONGPOS;
-					devc->m_ptr = 0;
-					break;
-
-				case 0xf3:
-					devc->m_state = ST_SONGSEL;
-					break;
-
-				case 0xf6:
-					/* printk( "tune_request\n"); */
-					devc->m_state = ST_INIT;
-					break;
-
-					/*
-					 *    Real time messages
-					 */
-				case 0xf8:
-					/* midi clock */
-					devc->m_state = ST_INIT;
-					timer_ext_event(devc, TMR_CLOCK, 0);
-					break;
-
-				case 0xfA:
-					devc->m_state = ST_INIT;
-					timer_ext_event(devc, TMR_START, 0);
-					break;
-
-				case 0xFB:
-					devc->m_state = ST_INIT;
-					timer_ext_event(devc, TMR_CONTINUE, 0);
-					break;
-
-				case 0xFC:
-					devc->m_state = ST_INIT;
-					timer_ext_event(devc, TMR_STOP, 0);
-					break;
-
-				case 0xFE:
-					/* active sensing */
-					devc->m_state = ST_INIT;
-					break;
-
-				case 0xff:
-					/* printk( "midi hard reset"); */
-					devc->m_state = ST_INIT;
-					break;
-
-				default:
-					printk("unknown MIDI sysmsg %0x\n", midic);
-					devc->m_state = ST_INIT;
-			}
-			break;
-
-		case ST_MTC:
-			devc->m_state = ST_INIT;
-			printk("MTC frame %x02\n", midic);
-			break;
-
-		case ST_SYSEX:
-			if (midic == 0xf7)
-			{
-				printk("<EOX>");
-				devc->m_state = ST_INIT;
-			}
-			else
-				printk("%02x ", midic);
-			break;
-
-		case ST_SONGPOS:
-			BUFTEST(devc);
-			devc->m_buf[devc->m_ptr++] = midic;
-			if (devc->m_ptr == 2)
-			{
-				devc->m_state = ST_INIT;
-				devc->m_ptr = 0;
-				timer_ext_event(devc, TMR_SPP,
-					((devc->m_buf[1] & 0x7f) << 7) |
-					(devc->m_buf[0] & 0x7f));
-			}
-			break;
-
-		case ST_DATABYTE:
-			BUFTEST(devc);
-			devc->m_buf[devc->m_ptr++] = midic;
-			if ((--devc->m_left) <= 0)
-			{
-				devc->m_state = ST_INIT;
-				do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
-				devc->m_ptr = 0;
-			}
-			break;
-
-		default:
-			printk("Bad state %d ", devc->m_state);
-			devc->m_state = ST_INIT;
-	}
-	return 1;
-}
-
-static void mpu401_input_loop(struct mpu_config *devc)
-{
-	unsigned long flags;
-	int busy;
-	int n;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	busy = devc->m_busy;
-	devc->m_busy = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	if (busy)		/* Already inside the scanner */
-		return;
-
-	n = 50;
-
-	while (input_avail(devc) && n-- > 0)
-	{
-		unsigned char c = read_data(devc);
-
-		if (devc->mode == MODE_SYNTH)
-		{
-			mpu_input_scanner(devc, c);
-		}
-		else if (devc->opened & OPEN_READ && devc->inputintr != NULL)
-			devc->inputintr(devc->devno, c);
-	}
-	devc->m_busy = 0;
-}
-
-static irqreturn_t mpuintr(int irq, void *dev_id)
-{
-	struct mpu_config *devc;
-	int dev = (int)(unsigned long) dev_id;
-	int handled = 0;
-
-	devc = &dev_conf[dev];
-
-	if (input_avail(devc))
-	{
-		handled = 1;
-		if (devc->base != 0 && (devc->opened & OPEN_READ || devc->mode == MODE_SYNTH))
-			mpu401_input_loop(devc);
-		else
-		{
-			/* Dummy read (just to acknowledge the interrupt) */
-			read_data(devc);
-		}
-	}
-	return IRQ_RETVAL(handled);
-}
-
-static int mpu401_open(int dev, int mode,
-	    void            (*input) (int dev, unsigned char data),
-	    void            (*output) (int dev)
-)
-{
-	int err;
-	struct mpu_config *devc;
-	struct coproc_operations *coprocessor;
-
-	if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
-		return -ENXIO;
-
-	devc = &dev_conf[dev];
-
-	if (devc->opened)
-		  return -EBUSY;
-	/*
-	 *  Verify that the device is really running.
-	 *  Some devices (such as Ensoniq SoundScape don't
-	 *  work before the on board processor (OBP) is initialized
-	 *  by downloading its microcode.
-	 */
-
-	if (!devc->initialized)
-	{
-		if (mpu401_status(devc) == 0xff)	/* Bus float */
-		{
-			printk(KERN_ERR "mpu401: Device not initialized properly\n");
-			return -EIO;
-		}
-		reset_mpu401(devc);
-	}
-
-	if ( (coprocessor = midi_devs[dev]->coproc) != NULL )
-	{
-		if (!try_module_get(coprocessor->owner)) {
-			mpu401_close(dev);
-			return -ENODEV;
-		}
-
-		if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
-		{
-			printk(KERN_WARNING "MPU-401: Can't access coprocessor device\n");
-			mpu401_close(dev);
-			return err;
-		}
-	}
-	
-	set_uart_mode(dev, devc, 1);
-	devc->mode = MODE_MIDI;
-	devc->synthno = 0;
-
-	mpu401_input_loop(devc);
-
-	devc->inputintr = input;
-	devc->opened = mode;
-
-	return 0;
-}
-
-static void mpu401_close(int dev)
-{
-	struct mpu_config *devc;
-	struct coproc_operations *coprocessor;
-
-	devc = &dev_conf[dev];
-	if (devc->uart_mode)
-		reset_mpu401(devc);	/*
-					 * This disables the UART mode
-					 */
-	devc->mode = 0;
-	devc->inputintr = NULL;
-
-	coprocessor = midi_devs[dev]->coproc;
-	if (coprocessor) {
-		coprocessor->close(coprocessor->devc, COPR_MIDI);
-		module_put(coprocessor->owner);
-	}
-	devc->opened = 0;
-}
-
-static int mpu401_out(int dev, unsigned char midi_byte)
-{
-	int timeout;
-	unsigned long flags;
-
-	struct mpu_config *devc;
-
-	devc = &dev_conf[dev];
-
-	/*
-	 * Sometimes it takes about 30000 loops before the output becomes ready
-	 * (After reset). Normally it takes just about 10 loops.
-	 */
-
-	for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
-
-	spin_lock_irqsave(&devc->lock,flags);
-	if (!output_ready(devc))
-	{
-		printk(KERN_WARNING "mpu401: Send data timeout\n");
-		spin_unlock_irqrestore(&devc->lock,flags);
-		return 0;
-	}
-	write_data(devc, midi_byte);
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return 1;
-}
-
-static int mpu401_command(int dev, mpu_command_rec * cmd)
-{
-	int i, timeout, ok;
-	unsigned long   flags;
-	struct mpu_config *devc;
-
-	devc = &dev_conf[dev];
-
-	if (devc->uart_mode)	/*
-				 * Not possible in UART mode
-				 */
-	{
-		printk(KERN_WARNING "mpu401: commands not possible in the UART mode\n");
-		return -EINVAL;
-	}
-	/*
-	 * Test for input since pending input seems to block the output.
-	 */
-	if (input_avail(devc))
-		mpu401_input_loop(devc);
-
-	/*
-	 * Sometimes it takes about 50000 loops before the output becomes ready
-	 * (After reset). Normally it takes just about 10 loops.
-	 */
-
-	timeout = 50000;
-retry:
-	if (timeout-- <= 0)
-	{
-		printk(KERN_WARNING "mpu401: Command (0x%x) timeout\n", (int) cmd->cmd);
-		return -EIO;
-	}
-	spin_lock_irqsave(&devc->lock,flags);
-
-	if (!output_ready(devc))
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
-		goto retry;
-	}
-	write_command(devc, cmd->cmd);
-
-	ok = 0;
-	for (timeout = 50000; timeout > 0 && !ok; timeout--)
-	{
-		if (input_avail(devc))
-		{
-			if (devc->opened && devc->mode == MODE_SYNTH)
-			{
-				if (mpu_input_scanner(devc, read_data(devc)) == MPU_ACK)
-					ok = 1;
-			}
-			else
-			{
-				/* Device is not currently open. Use simpler method */
-				if (read_data(devc) == MPU_ACK)
-					ok = 1;
-			}
-		}
-	}
-	if (!ok)
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
-		return -EIO;
-	}
-	if (cmd->nr_args)
-	{
-		for (i = 0; i < cmd->nr_args; i++)
-		{
-			for (timeout = 3000; timeout > 0 && !output_ready(devc); timeout--);
-
-			if (!mpu401_out(dev, cmd->data[i]))
-			{
-				spin_unlock_irqrestore(&devc->lock,flags);
-				printk(KERN_WARNING "mpu401: Command (0x%x), parm send failed.\n", (int) cmd->cmd);
-				return -EIO;
-			}
-		}
-	}
-	cmd->data[0] = 0;
-
-	if (cmd->nr_returns)
-	{
-		for (i = 0; i < cmd->nr_returns; i++)
-		{
-			ok = 0;
-			for (timeout = 5000; timeout > 0 && !ok; timeout--)
-				if (input_avail(devc))
-				{
-					cmd->data[i] = read_data(devc);
-					ok = 1;
-				}
-			if (!ok)
-			{
-				spin_unlock_irqrestore(&devc->lock,flags);
-				return -EIO;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return 0;
-}
-
-static int mpu_cmd(int dev, int cmd, int data)
-{
-	int ret;
-
-	static mpu_command_rec rec;
-
-	rec.cmd = cmd & 0xff;
-	rec.nr_args = ((cmd & 0xf0) == 0xE0);
-	rec.nr_returns = ((cmd & 0xf0) == 0xA0);
-	rec.data[0] = data & 0xff;
-
-	if ((ret = mpu401_command(dev, &rec)) < 0)
-		return ret;
-	return (unsigned char) rec.data[0];
-}
-
-static int mpu401_prefix_cmd(int dev, unsigned char status)
-{
-	struct mpu_config *devc = &dev_conf[dev];
-
-	if (devc->uart_mode)
-		return 1;
-
-	if (status < 0xf0)
-	{
-		if (mpu_cmd(dev, 0xD0, 0) < 0)
-			return 0;
-		return 1;
-	}
-	switch (status)
-	{
-		case 0xF0:
-			if (mpu_cmd(dev, 0xDF, 0) < 0)
-				return 0;
-			return 1;
-
-		default:
-			return 0;
-	}
-}
-
-static int mpu401_start_read(int dev)
-{
-	return 0;
-}
-
-static int mpu401_end_read(int dev)
-{
-	return 0;
-}
-
-static int mpu401_ioctl(int dev, unsigned cmd, void __user *arg)
-{
-	struct mpu_config *devc;
-	mpu_command_rec rec;
-	int val, ret;
-
-	devc = &dev_conf[dev];
-	switch (cmd) 
-	{
-		case SNDCTL_MIDI_MPUMODE:
-			if (!(devc->capabilities & MPU_CAP_INTLG)) { /* No intelligent mode */
-				printk(KERN_WARNING "mpu401: Intelligent mode not supported by the HW\n");
-				return -EINVAL;
-			}
-			if (get_user(val, (int __user *)arg))
-				return -EFAULT;
-			set_uart_mode(dev, devc, !val);
-			return 0;
-
-		case SNDCTL_MIDI_MPUCMD:
-			if (copy_from_user(&rec, arg, sizeof(rec)))
-				return -EFAULT;
-			if ((ret = mpu401_command(dev, &rec)) < 0)
-				return ret;
-			if (copy_to_user(arg, &rec, sizeof(rec)))
-				return -EFAULT;
-			return 0;
-
-		default:
-			return -EINVAL;
-	}
-}
-
-static void mpu401_kick(int dev)
-{
-}
-
-static int mpu401_buffer_status(int dev)
-{
-	return 0;		/*
-				 * No data in buffers
-				 */
-}
-
-static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	int midi_dev;
-	struct mpu_config *devc;
-
-	midi_dev = synth_devs[dev]->midi_dev;
-
-	if (midi_dev < 0 || midi_dev >= num_midis || midi_devs[midi_dev] == NULL)
-		return -ENXIO;
-
-	devc = &dev_conf[midi_dev];
-
-	switch (cmd)
-	{
-
-		case SNDCTL_SYNTH_INFO:
-			if (copy_to_user(arg, &mpu_synth_info[midi_dev],
-					sizeof(struct synth_info)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_SYNTH_MEMAVL:
-			return 0x7fffffff;
-
-		default:
-			return -EINVAL;
-	}
-}
-
-static int mpu_synth_open(int dev, int mode)
-{
-	int midi_dev, err;
-	struct mpu_config *devc;
-	struct coproc_operations *coprocessor;
-
-	midi_dev = synth_devs[dev]->midi_dev;
-
-	if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
-		return -ENXIO;
-
-	devc = &dev_conf[midi_dev];
-
-	/*
-	 *  Verify that the device is really running.
-	 *  Some devices (such as Ensoniq SoundScape don't
-	 *  work before the on board processor (OBP) is initialized
-	 *  by downloading its microcode.
-	 */
-
-	if (!devc->initialized)
-	{
-		if (mpu401_status(devc) == 0xff)	/* Bus float */
-		{
-			printk(KERN_ERR "mpu401: Device not initialized properly\n");
-			return -EIO;
-		}
-		reset_mpu401(devc);
-	}
-	if (devc->opened)
-		return -EBUSY;
-	devc->mode = MODE_SYNTH;
-	devc->synthno = dev;
-
-	devc->inputintr = NULL;
-
-	coprocessor = midi_devs[midi_dev]->coproc;
-	if (coprocessor) {
-		if (!try_module_get(coprocessor->owner))
-			return -ENODEV;
-
-		if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
-		{
-			printk(KERN_WARNING "mpu401: Can't access coprocessor device\n");
-			return err;
-		}
-	}
-	devc->opened = mode;
-	reset_mpu401(devc);
-
-	if (mode & OPEN_READ)
-	{
-		mpu_cmd(midi_dev, 0x8B, 0);	/* Enable data in stop mode */
-		mpu_cmd(midi_dev, 0x34, 0);	/* Return timing bytes in stop mode */
-		mpu_cmd(midi_dev, 0x87, 0);	/* Enable pitch & controller */
-	}
-	return 0;
-}
-
-static void mpu_synth_close(int dev)
-{ 
-	int midi_dev;
-	struct mpu_config *devc;
-	struct coproc_operations *coprocessor;
-
-	midi_dev = synth_devs[dev]->midi_dev;
-
-	devc = &dev_conf[midi_dev];
-	mpu_cmd(midi_dev, 0x15, 0);	/* Stop recording, playback and MIDI */
-	mpu_cmd(midi_dev, 0x8a, 0);	/* Disable data in stopped mode */
-
-	devc->inputintr = NULL;
-
-	coprocessor = midi_devs[midi_dev]->coproc;
-	if (coprocessor) {
-		coprocessor->close(coprocessor->devc, COPR_MIDI);
-		module_put(coprocessor->owner);
-	}
-	devc->opened = 0;
-	devc->mode = 0;
-}
-
-#define MIDI_SYNTH_NAME	"MPU-401 UART Midi"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-#include "midi_synth.h"
-
-static struct synth_operations mpu401_synth_proto =
-{
-	.owner		= THIS_MODULE,
-	.id		= "MPU401",
-	.info		= NULL,
-	.midi_dev	= 0,
-	.synth_type	= SYNTH_TYPE_MIDI,
-	.synth_subtype	= 0,
-	.open		= mpu_synth_open,
-	.close		= mpu_synth_close,
-	.ioctl		= mpu_synth_ioctl,
-	.kill_note	= midi_synth_kill_note,
-	.start_note	= midi_synth_start_note,
-	.set_instr	= midi_synth_set_instr,
-	.reset		= midi_synth_reset,
-	.hw_control	= midi_synth_hw_control,
-	.load_patch	= midi_synth_load_patch,
-	.aftertouch	= midi_synth_aftertouch,
-	.controller	= midi_synth_controller,
-	.panning	= midi_synth_panning,
-	.bender		= midi_synth_bender,
-	.setup_voice	= midi_synth_setup_voice,
-	.send_sysex	= midi_synth_send_sysex
-};
-
-static struct synth_operations *mpu401_synth_operations[MAX_MIDI_DEV];
-
-static struct midi_operations mpu401_midi_proto =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"MPU-401 Midi", 0, MIDI_CAP_MPU401, SNDCARD_MPU401},
-	.in_info	= {0},
-	.open		= mpu401_open,
-	.close		= mpu401_close,
-	.ioctl		= mpu401_ioctl,
-	.outputc	= mpu401_out,
-	.start_read	= mpu401_start_read,
-	.end_read	= mpu401_end_read,
-	.kick		= mpu401_kick,
-	.buffer_status	= mpu401_buffer_status,
-	.prefix_cmd	= mpu401_prefix_cmd
-};
-
-static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV];
-
-static void mpu401_chk_version(int n, struct mpu_config *devc)
-{
-	int tmp;
-
-	devc->version = devc->revision = 0;
-
-	tmp = mpu_cmd(n, 0xAC, 0);
-	if (tmp < 0)
-		return;
-	if ((tmp & 0xf0) > 0x20)	/* Why it's larger than 2.x ??? */
-		return;
-	devc->version = tmp;
-
-	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) {
-		devc->version = 0;
-		return;
-	}
-	devc->revision = tmp;
-}
-
-int attach_mpu401(struct address_info *hw_config, struct module *owner)
-{
-	unsigned long flags;
-	char revision_char;
-
-	int m, ret;
-	struct mpu_config *devc;
-
-	hw_config->slots[1] = -1;
-	m = sound_alloc_mididev();
-	if (m == -1)
-	{
-		printk(KERN_WARNING "MPU-401: Too many midi devices detected\n");
-		ret = -ENOMEM;
-		goto out_err;
-	}
-	devc = &dev_conf[m];
-	devc->base = hw_config->io_base;
-	devc->osp = hw_config->osp;
-	devc->irq = hw_config->irq;
-	devc->opened = 0;
-	devc->uart_mode = 0;
-	devc->initialized = 0;
-	devc->version = 0;
-	devc->revision = 0;
-	devc->capabilities = 0;
-	devc->timer_flag = 0;
-	devc->m_busy = 0;
-	devc->m_state = ST_INIT;
-	devc->shared_irq = hw_config->always_detect;
-	spin_lock_init(&devc->lock);
-
-	if (devc->irq < 0)
-	{
-		devc->irq *= -1;
-		devc->shared_irq = 1;
-	}
-
-	if (!hw_config->always_detect)
-	{
-		/* Verify the hardware again */
-		if (!reset_mpu401(devc))
-		{
-			printk(KERN_WARNING "mpu401: Device didn't respond\n");
-			ret = -ENODEV;
-			goto out_mididev;
-		}
-		if (!devc->shared_irq)
-		{
-			if (request_irq(devc->irq, mpuintr, 0, "mpu401",
-					hw_config) < 0)
-			{
-				printk(KERN_WARNING "mpu401: Failed to allocate IRQ%d\n", devc->irq);
-				ret = -ENOMEM;
-				goto out_mididev;
-			}
-		}
-		spin_lock_irqsave(&devc->lock,flags);
-		mpu401_chk_version(m, devc);
-		if (devc->version == 0)
-			mpu401_chk_version(m, devc);
-		spin_unlock_irqrestore(&devc->lock, flags);
-	}
-
-	if (devc->version != 0)
-		if (mpu_cmd(m, 0xC5, 0) >= 0)	/* Set timebase OK */
-			if (mpu_cmd(m, 0xE0, 120) >= 0)		/* Set tempo OK */
-				devc->capabilities |= MPU_CAP_INTLG;	/* Supports intelligent mode */
-
-
-	mpu401_synth_operations[m] = kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
-
-	if (mpu401_synth_operations[m] == NULL)
-	{
-		printk(KERN_ERR "mpu401: Can't allocate memory\n");
-		ret = -ENOMEM;
-		goto out_irq;
-	}
-	if (!(devc->capabilities & MPU_CAP_INTLG))	/* No intelligent mode */
-	{
-		memcpy((char *) mpu401_synth_operations[m],
-			(char *) &std_midi_synth,
-			 sizeof(struct synth_operations));
-	}
-	else
-	{
-		memcpy((char *) mpu401_synth_operations[m],
-			(char *) &mpu401_synth_proto,
-			 sizeof(struct synth_operations));
-	}
-	if (owner)
-		mpu401_synth_operations[m]->owner = owner;
-
-	memcpy((char *) &mpu401_midi_operations[m],
-	       (char *) &mpu401_midi_proto,
-	       sizeof(struct midi_operations));
-
-	mpu401_midi_operations[m].converter = mpu401_synth_operations[m];
-
-	memcpy((char *) &mpu_synth_info[m],
-	       (char *) &mpu_synth_info_proto,
-	       sizeof(struct synth_info));
-
-	n_mpu_devs++;
-
-	if (devc->version == 0x20 && devc->revision >= 0x07)	/* MusicQuest interface */
-	{
-		int ports = (devc->revision & 0x08) ? 32 : 16;
-
-		devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_SMPTE |
-				MPU_CAP_CLS | MPU_CAP_2PORT;
-
-		revision_char = (devc->revision == 0x7f) ? 'M' : ' ';
-		sprintf(mpu_synth_info[m].name, "MQX-%d%c MIDI Interface #%d",
-				ports,
-				revision_char,
-				n_mpu_devs);
-	}
-	else
-	{
-		revision_char = devc->revision ? devc->revision + '@' : ' ';
-		if ((int) devc->revision > ('Z' - '@'))
-			revision_char = '+';
-
-		devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_FSK;
-
-		if (hw_config->name)
-			sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
-		else
-			sprintf(mpu_synth_info[m].name,
-				"MPU-401 %d.%d%c MIDI #%d",
-				(int) (devc->version & 0xf0) >> 4,
-				devc->version & 0x0f,
-				revision_char,
-				n_mpu_devs);
-	}
-
-	strcpy(mpu401_midi_operations[m].info.name,
-	       mpu_synth_info[m].name);
-
-	conf_printf(mpu_synth_info[m].name, hw_config);
-
-	mpu401_synth_operations[m]->midi_dev = devc->devno = m;
-	mpu401_synth_operations[devc->devno]->info = &mpu_synth_info[devc->devno];
-
-	if (devc->capabilities & MPU_CAP_INTLG)		/* Intelligent mode */
-		hw_config->slots[2] = mpu_timer_init(m);
-
-	midi_devs[m] = &mpu401_midi_operations[devc->devno];
-	
-	if (owner)
-		midi_devs[m]->owner = owner;
-
-	hw_config->slots[1] = m;
-	sequencer_init();
-	
-	return 0;
-
-out_irq:
-	free_irq(devc->irq, hw_config);
-out_mididev:
-	sound_unload_mididev(m);
-out_err:
-	release_region(hw_config->io_base, 2);
-	return ret;
-}
-
-static int reset_mpu401(struct mpu_config *devc)
-{
-	unsigned long flags;
-	int ok, timeout, n;
-	int timeout_limit;
-
-	/*
-	 * Send the RESET command. Try again if no success at the first time.
-	 * (If the device is in the UART mode, it will not ack the reset cmd).
-	 */
-
-	ok = 0;
-
-	timeout_limit = devc->initialized ? 30000 : 100000;
-	devc->initialized = 1;
-
-	for (n = 0; n < 2 && !ok; n++)
-	{
-		for (timeout = timeout_limit; timeout > 0 && !ok; timeout--)
-			  ok = output_ready(devc);
-
-		write_command(devc, MPU_RESET);	/*
-							   * Send MPU-401 RESET Command
-							 */
-
-		/*
-		 * Wait at least 25 msec. This method is not accurate so let's make the
-		 * loop bit longer. Cannot sleep since this is called during boot.
-		 */
-
-		for (timeout = timeout_limit * 2; timeout > 0 && !ok; timeout--)
-		{
-			spin_lock_irqsave(&devc->lock,flags);
-			if (input_avail(devc))
-				if (read_data(devc) == MPU_ACK)
-					ok = 1;
-			spin_unlock_irqrestore(&devc->lock,flags);
-		}
-
-	}
-
-	devc->m_state = ST_INIT;
-	devc->m_ptr = 0;
-	devc->m_left = 0;
-	devc->last_status = 0;
-	devc->uart_mode = 0;
-
-	return ok;
-}
-
-static void set_uart_mode(int dev, struct mpu_config *devc, int arg)
-{
-	if (!arg && (devc->capabilities & MPU_CAP_INTLG))
-		return;
-	if ((devc->uart_mode == 0) == (arg == 0))
-		return;		/* Already set */
-	reset_mpu401(devc);	/* This exits the uart mode */
-
-	if (arg)
-	{
-		if (mpu_cmd(dev, UART_MODE_ON, 0) < 0)
-		{
-			printk(KERN_ERR "mpu401: Can't enter UART mode\n");
-			devc->uart_mode = 0;
-			return;
-		}
-	}
-	devc->uart_mode = arg;
-
-}
-
-int probe_mpu401(struct address_info *hw_config, struct resource *ports)
-{
-	int ok = 0;
-	struct mpu_config tmp_devc;
-
-	tmp_devc.base = hw_config->io_base;
-	tmp_devc.irq = hw_config->irq;
-	tmp_devc.initialized = 0;
-	tmp_devc.opened = 0;
-	tmp_devc.osp = hw_config->osp;
-
-	if (hw_config->always_detect)
-		return 1;
-
-	if (inb(hw_config->io_base + 1) == 0xff)
-	{
-		DDB(printk("MPU401: Port %x looks dead.\n", hw_config->io_base));
-		return 0;	/* Just bus float? */
-	}
-	ok = reset_mpu401(&tmp_devc);
-
-	if (!ok)
-	{
-		DDB(printk("MPU401: Reset failed on port %x\n", hw_config->io_base));
-	}
-	return ok;
-}
-
-void unload_mpu401(struct address_info *hw_config)
-{
-	void *p;
-	int n=hw_config->slots[1];
-		
-	if (n != -1) {
-		release_region(hw_config->io_base, 2);
-		if (hw_config->always_detect == 0 && hw_config->irq > 0)
-			free_irq(hw_config->irq, hw_config);
-		p=mpu401_synth_operations[n];
-		sound_unload_mididev(n);
-		sound_unload_timerdev(hw_config->slots[2]);
-		kfree(p);
-	}
-}
-
-/*****************************************************
- *      Timer stuff
- ****************************************************/
-
-static volatile int timer_initialized = 0, timer_open = 0, tmr_running = 0;
-static volatile int curr_tempo, curr_timebase, hw_timebase;
-static int      max_timebase = 8;	/* 8*24=192 ppqn */
-static volatile unsigned long next_event_time;
-static volatile unsigned long curr_ticks, curr_clocks;
-static unsigned long prev_event_time;
-static int      metronome_mode;
-
-static unsigned long clocks2ticks(unsigned long clocks)
-{
-	/*
-	 * The MPU-401 supports just a limited set of possible timebase values.
-	 * Since the applications require more choices, the driver has to
-	 * program the HW to do its best and to convert between the HW and
-	 * actual timebases.
-	 */
-	return ((clocks * curr_timebase) + (hw_timebase / 2)) / hw_timebase;
-}
-
-static void set_timebase(int midi_dev, int val)
-{
-	int hw_val;
-
-	if (val < 48)
-		val = 48;
-	if (val > 1000)
-		val = 1000;
-
-	hw_val = val;
-	hw_val = (hw_val + 12) / 24;
-	if (hw_val > max_timebase)
-		hw_val = max_timebase;
-
-	if (mpu_cmd(midi_dev, 0xC0 | (hw_val & 0x0f), 0) < 0)
-	{
-		printk(KERN_WARNING "mpu401: Can't set HW timebase to %d\n", hw_val * 24);
-		return;
-	}
-	hw_timebase = hw_val * 24;
-	curr_timebase = val;
-
-}
-
-static void tmr_reset(struct mpu_config *devc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	next_event_time = (unsigned long) -1;
-	prev_event_time = 0;
-	curr_ticks = curr_clocks = 0;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void set_timer_mode(int midi_dev)
-{
-	if (timer_mode & TMR_MODE_CLS)
-		mpu_cmd(midi_dev, 0x3c, 0);	/* Use CLS sync */
-	else if (timer_mode & TMR_MODE_SMPTE)
-		mpu_cmd(midi_dev, 0x3d, 0);	/* Use SMPTE sync */
-
-	if (timer_mode & TMR_INTERNAL)
-	{
-		  mpu_cmd(midi_dev, 0x80, 0);	/* Use MIDI sync */
-	}
-	else
-	{
-		if (timer_mode & (TMR_MODE_MIDI | TMR_MODE_CLS))
-		{
-			mpu_cmd(midi_dev, 0x82, 0);		/* Use MIDI sync */
-			mpu_cmd(midi_dev, 0x91, 0);		/* Enable ext MIDI ctrl */
-		}
-		else if (timer_mode & TMR_MODE_FSK)
-			mpu_cmd(midi_dev, 0x81, 0);	/* Use FSK sync */
-	}
-}
-
-static void stop_metronome(int midi_dev)
-{
-	mpu_cmd(midi_dev, 0x84, 0);	/* Disable metronome */
-}
-
-static void setup_metronome(int midi_dev)
-{
-	int numerator, denominator;
-	int clks_per_click, num_32nds_per_beat;
-	int beats_per_measure;
-
-	numerator = ((unsigned) metronome_mode >> 24) & 0xff;
-	denominator = ((unsigned) metronome_mode >> 16) & 0xff;
-	clks_per_click = ((unsigned) metronome_mode >> 8) & 0xff;
-	num_32nds_per_beat = (unsigned) metronome_mode & 0xff;
-	beats_per_measure = (numerator * 4) >> denominator;
-
-	if (!metronome_mode)
-		mpu_cmd(midi_dev, 0x84, 0);	/* Disable metronome */
-	else
-	{
-		mpu_cmd(midi_dev, 0xE4, clks_per_click);
-		mpu_cmd(midi_dev, 0xE6, beats_per_measure);
-		mpu_cmd(midi_dev, 0x83, 0);	/* Enable metronome without accents */
-	}
-}
-
-static int mpu_start_timer(int midi_dev)
-{
-	struct mpu_config *devc= &dev_conf[midi_dev];
-
-	tmr_reset(devc);
-	set_timer_mode(midi_dev);
-
-	if (tmr_running)
-		return TIMER_NOT_ARMED;		/* Already running */
-
-	if (timer_mode & TMR_INTERNAL)
-	{
-		mpu_cmd(midi_dev, 0x02, 0);	/* Send MIDI start */
-		tmr_running = 1;
-		return TIMER_NOT_ARMED;
-	}
-	else
-	{
-		mpu_cmd(midi_dev, 0x35, 0);	/* Enable mode messages to PC */
-		mpu_cmd(midi_dev, 0x38, 0);	/* Enable sys common messages to PC */
-		mpu_cmd(midi_dev, 0x39, 0);	/* Enable real time messages to PC */
-		mpu_cmd(midi_dev, 0x97, 0);	/* Enable system exclusive messages to PC */
-	}
-	return TIMER_ARMED;
-}
-
-static int mpu_timer_open(int dev, int mode)
-{
-	int midi_dev = sound_timer_devs[dev]->devlink;
-	struct mpu_config *devc= &dev_conf[midi_dev];
-
-	if (timer_open)
-		return -EBUSY;
-
-	tmr_reset(devc);
-	curr_tempo = 50;
-	mpu_cmd(midi_dev, 0xE0, 50);
-	curr_timebase = hw_timebase = 120;
-	set_timebase(midi_dev, 120);
-	timer_open = 1;
-	metronome_mode = 0;
-	set_timer_mode(midi_dev);
-
-	mpu_cmd(midi_dev, 0xe7, 0x04);	/* Send all clocks to host */
-	mpu_cmd(midi_dev, 0x95, 0);	/* Enable clock to host */
-
-	return 0;
-}
-
-static void mpu_timer_close(int dev)
-{
-	int midi_dev = sound_timer_devs[dev]->devlink;
-
-	timer_open = tmr_running = 0;
-	mpu_cmd(midi_dev, 0x15, 0);	/* Stop all */
-	mpu_cmd(midi_dev, 0x94, 0);	/* Disable clock to host */
-	mpu_cmd(midi_dev, 0x8c, 0);	/* Disable measure end messages to host */
-	stop_metronome(midi_dev);
-}
-
-static int mpu_timer_event(int dev, unsigned char *event)
-{
-	unsigned char command = event[1];
-	unsigned long parm = *(unsigned int *) &event[4];
-	int midi_dev = sound_timer_devs[dev]->devlink;
-
-	switch (command)
-	{
-		case TMR_WAIT_REL:
-			parm += prev_event_time;
-		case TMR_WAIT_ABS:
-			if (parm > 0)
-			{
-				long time;
-
-				if (parm <= curr_ticks)	/* It's the time */
-					return TIMER_NOT_ARMED;
-				time = parm;
-				next_event_time = prev_event_time = time;
-
-				return TIMER_ARMED;
-			}
-			break;
-
-		case TMR_START:
-			if (tmr_running)
-				break;
-			return mpu_start_timer(midi_dev);
-
-		case TMR_STOP:
-			mpu_cmd(midi_dev, 0x01, 0);	/* Send MIDI stop */
-			stop_metronome(midi_dev);
-			tmr_running = 0;
-			break;
-
-		case TMR_CONTINUE:
-			if (tmr_running)
-				break;
-			mpu_cmd(midi_dev, 0x03, 0);	/* Send MIDI continue */
-			setup_metronome(midi_dev);
-			tmr_running = 1;
-			break;
-
-		case TMR_TEMPO:
-			if (parm)
-			{
-				if (parm < 8)
-					parm = 8;
-			 	if (parm > 250)
-					parm = 250;
-				if (mpu_cmd(midi_dev, 0xE0, parm) < 0)
-					printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) parm);
-				curr_tempo = parm;
-			}
-			break;
-
-		case TMR_ECHO:
-			seq_copy_to_input(event, 8);
-			break;
-
-		case TMR_TIMESIG:
-			if (metronome_mode)	/* Metronome enabled */
-			{
-				metronome_mode = parm;
-				setup_metronome(midi_dev);
-			}
-			break;
-
-		default:;
-	}
-	return TIMER_NOT_ARMED;
-}
-
-static unsigned long mpu_timer_get_time(int dev)
-{
-	if (!timer_open)
-		return 0;
-
-	return curr_ticks;
-}
-
-static int mpu_timer_ioctl(int dev, unsigned int command, void __user *arg)
-{
-	int midi_dev = sound_timer_devs[dev]->devlink;
-	int __user *p = (int __user *)arg;
-
-	switch (command)
-	{
-		case SNDCTL_TMR_SOURCE:
-			{
-				int parm;
-
-				if (get_user(parm, p))
-					return -EFAULT;
-				parm &= timer_caps;
-
-				if (parm != 0)
-				{
-					timer_mode = parm;
-	
-					if (timer_mode & TMR_MODE_CLS)
-						mpu_cmd(midi_dev, 0x3c, 0);		/* Use CLS sync */
-					else if (timer_mode & TMR_MODE_SMPTE)
-						mpu_cmd(midi_dev, 0x3d, 0);		/* Use SMPTE sync */
-				}
-				if (put_user(timer_mode, p))
-					return -EFAULT;
-				return timer_mode;
-			}
-			break;
-
-		case SNDCTL_TMR_START:
-			mpu_start_timer(midi_dev);
-			return 0;
-
-		case SNDCTL_TMR_STOP:
-			tmr_running = 0;
-			mpu_cmd(midi_dev, 0x01, 0);	/* Send MIDI stop */
-			stop_metronome(midi_dev);
-			return 0;
-
-		case SNDCTL_TMR_CONTINUE:
-			if (tmr_running)
-				return 0;
-			tmr_running = 1;
-			mpu_cmd(midi_dev, 0x03, 0);	/* Send MIDI continue */
-			return 0;
-
-		case SNDCTL_TMR_TIMEBASE:
-			{
-				int val;
-				if (get_user(val, p))
-					return -EFAULT;
-				if (val)
-					set_timebase(midi_dev, val);
-				if (put_user(curr_timebase, p))
-					return -EFAULT;
-				return curr_timebase;
-			}
-			break;
-
-		case SNDCTL_TMR_TEMPO:
-			{
-				int val;
-				int ret;
-
-				if (get_user(val, p))
-					return -EFAULT;
-
-				if (val)
-				{
-					if (val < 8)
-						val = 8;
-					if (val > 250)
-						val = 250;
-					if ((ret = mpu_cmd(midi_dev, 0xE0, val)) < 0)
-					{
-						printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) val);
-						return ret;
-					}
-					curr_tempo = val;
-				}
-				if (put_user(curr_tempo, p))
-					return -EFAULT;
-				return curr_tempo;
-			}
-			break;
-
-		case SNDCTL_SEQ_CTRLRATE:
-			{
-				int val;
-				if (get_user(val, p))
-					return -EFAULT;
-
-				if (val != 0)		/* Can't change */
-					return -EINVAL;
-				val = ((curr_tempo * curr_timebase) + 30)/60;
-				if (put_user(val, p))
-					return -EFAULT;
-				return val;
-			}
-			break;
-
-		case SNDCTL_SEQ_GETTIME:
-			if (put_user(curr_ticks, p))
-				return -EFAULT;
-			return curr_ticks;
-
-		case SNDCTL_TMR_METRONOME:
-			if (get_user(metronome_mode, p))
-				return -EFAULT;
-			setup_metronome(midi_dev);
-			return 0;
-
-		default:;
-	}
-	return -EINVAL;
-}
-
-static void mpu_timer_arm(int dev, long time)
-{
-	if (time < 0)
-		time = curr_ticks + 1;
-	else if (time <= curr_ticks)	/* It's the time */
-		return;
-	next_event_time = prev_event_time = time;
-	return;
-}
-
-static struct sound_timer_operations mpu_timer =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"MPU-401 Timer", 0},
-	.priority	= 10,	/* Priority */
-	.devlink	= 0,	/* Local device link */
-	.open		= mpu_timer_open,
-	.close		= mpu_timer_close,
-	.event		= mpu_timer_event,
-	.get_time	= mpu_timer_get_time,
-	.ioctl		= mpu_timer_ioctl,
-	.arm_timer	= mpu_timer_arm
-};
-
-static void mpu_timer_interrupt(void)
-{
-	if (!timer_open)
-		return;
-
-	if (!tmr_running)
-		return;
-
-	curr_clocks++;
-	curr_ticks = clocks2ticks(curr_clocks);
-
-	if (curr_ticks >= next_event_time)
-	{
-		next_event_time = (unsigned long) -1;
-		sequencer_timer(0);
-	}
-}
-
-static void timer_ext_event(struct mpu_config *devc, int event, int parm)
-{
-	int midi_dev = devc->devno;
-
-	if (!devc->timer_flag)
-		return;
-
-	switch (event)
-	{
-		case TMR_CLOCK:
-			printk("<MIDI clk>");
-			break;
-
-		case TMR_START:
-			printk("Ext MIDI start\n");
-			if (!tmr_running)
-			{
-				if (timer_mode & TMR_EXTERNAL)
-				{
-					tmr_running = 1;
-					setup_metronome(midi_dev);
-					next_event_time = 0;
-					STORE(SEQ_START_TIMER());
-				}
-			}
-			break;
-
-		case TMR_STOP:
-			printk("Ext MIDI stop\n");
-			if (timer_mode & TMR_EXTERNAL)
-			{
-				tmr_running = 0;
-				stop_metronome(midi_dev);
-				STORE(SEQ_STOP_TIMER());
-			}
-			break;
-
-		case TMR_CONTINUE:
-			printk("Ext MIDI continue\n");
-			if (timer_mode & TMR_EXTERNAL)
-			{
-				tmr_running = 1;
-				setup_metronome(midi_dev);
-				STORE(SEQ_CONTINUE_TIMER());
-		  	}
-		  	break;
-
-		case TMR_SPP:
-			printk("Songpos: %d\n", parm);
-			if (timer_mode & TMR_EXTERNAL)
-			{
-				STORE(SEQ_SONGPOS(parm));
-			}
-			break;
-	}
-}
-
-static int mpu_timer_init(int midi_dev)
-{
-	struct mpu_config *devc;
-	int n;
-
-	devc = &dev_conf[midi_dev];
-
-	if (timer_initialized)
-		return -1;	/* There is already a similar timer */
-
-	timer_initialized = 1;
-
-	mpu_timer.devlink = midi_dev;
-	dev_conf[midi_dev].timer_flag = 1;
-
-	n = sound_alloc_timerdev();
-	if (n == -1)
-		n = 0;
-	sound_timer_devs[n] = &mpu_timer;
-
-	if (devc->version < 0x20)	/* Original MPU-401 */
-		timer_caps = TMR_INTERNAL | TMR_EXTERNAL | TMR_MODE_FSK | TMR_MODE_MIDI;
-	else
-	{
-		/*
-		 * The version number 2.0 is used (at least) by the
-		 * MusicQuest cards and the Roland Super-MPU.
-		 *
-		 * MusicQuest has given a special meaning to the bits of the
-		 * revision number. The Super-MPU returns 0.
-		 */
-
-		if (devc->revision)
-			timer_caps |= TMR_EXTERNAL | TMR_MODE_MIDI;
-
-		if (devc->revision & 0x02)
-			timer_caps |= TMR_MODE_CLS;
-
-
-		if (devc->revision & 0x40)
-			max_timebase = 10;	/* Has the 216 and 240 ppqn modes */
-	}
-
-	timer_mode = (TMR_INTERNAL | TMR_MODE_MIDI) & timer_caps;
-	return n;
-
-}
-
-EXPORT_SYMBOL(probe_mpu401);
-EXPORT_SYMBOL(attach_mpu401);
-EXPORT_SYMBOL(unload_mpu401);
-
-static struct address_info cfg;
-
-static int io = -1;
-static int irq = -1;
-
-module_param_hw(irq, int, irq, 0);
-module_param_hw(io, int, ioport, 0);
-
-static int __init init_mpu401(void)
-{
-	int ret;
-	/* Can be loaded either for module use or to provide functions
-	   to others */
-	if (io != -1 && irq != -1) {
-		struct resource *ports;
-	        cfg.irq = irq;
-		cfg.io_base = io;
-		ports = request_region(io, 2, "mpu401");
-		if (!ports)
-			return -EBUSY;
-		if (probe_mpu401(&cfg, ports) == 0) {
-			release_region(io, 2);
-			return -ENODEV;
-		}
-		if ((ret = attach_mpu401(&cfg, THIS_MODULE)))
-			return ret;
-	}
-	
-	return 0;
-}
-
-static void __exit cleanup_mpu401(void)
-{
-	if (io != -1 && irq != -1) {
-		/* Check for use by, for example, sscape driver */
-		unload_mpu401(&cfg);
-	}
-}
-
-module_init(init_mpu401);
-module_exit(cleanup_mpu401);
-
-#ifndef MODULE
-static int __init setup_mpu401(char *str)
-{
-        /* io, irq */
-	int ints[3];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io = ints[1];
-	irq = ints[2];
-
-	return 1;
-}
-
-__setup("mpu401=", setup_mpu401);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/mpu401.h b/sound/oss/mpu401.h
deleted file mode 100644
index 0ad1e9ee74f7..000000000000
--- a/sound/oss/mpu401.h
+++ /dev/null
@@ -1,11 +0,0 @@
-
-/*	From uart401.c */
-int probe_uart401 (struct address_info *hw_config, struct module *owner);
-void unload_uart401 (struct address_info *hw_config);
-
-irqreturn_t uart401intr (int irq, void *dev_id);
-
-/*	From mpu401.c */
-int probe_mpu401(struct address_info *hw_config, struct resource *ports);
-int attach_mpu401(struct address_info * hw_config, struct module *owner);
-void unload_mpu401(struct address_info *hw_info);
diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c
deleted file mode 100644
index b63010ad22f1..000000000000
--- a/sound/oss/msnd.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*********************************************************************
- *
- * msnd.c - Driver Base
- *
- * Turtle Beach MultiSound Sound Card Driver for Linux
- *
- * Copyright (C) 1998 Andrew Veliath
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include "msnd.h"
-
-#define LOGNAME			"msnd"
-
-#define MSND_MAX_DEVS		4
-
-static multisound_dev_t		*devs[MSND_MAX_DEVS];
-static int			num_devs;
-
-int msnd_register(multisound_dev_t *dev)
-{
-	int i;
-
-	for (i = 0; i < MSND_MAX_DEVS; ++i)
-		if (devs[i] == NULL)
-			break;
-
-	if (i == MSND_MAX_DEVS)
-		return -ENOMEM;
-
-	devs[i] = dev;
-	++num_devs;
-	return 0;
-}
-
-void msnd_unregister(multisound_dev_t *dev)
-{
-	int i;
-
-	for (i = 0; i < MSND_MAX_DEVS; ++i)
-		if (devs[i] == dev)
-			break;
-
-	if (i == MSND_MAX_DEVS) {
-		printk(KERN_WARNING LOGNAME ": Unregistering unknown device\n");
-		return;
-	}
-
-	devs[i] = NULL;
-	--num_devs;
-}
-
-void msnd_init_queue(void __iomem *base, int start, int size)
-{
-	writew(PCTODSP_BASED(start), base + JQS_wStart);
-	writew(PCTODSP_OFFSET(size) - 1, base + JQS_wSize);
-	writew(0, base + JQS_wHead);
-	writew(0, base + JQS_wTail);
-}
-
-void msnd_fifo_init(msnd_fifo *f)
-{
-	f->data = NULL;
-}
-
-void msnd_fifo_free(msnd_fifo *f)
-{
-	vfree(f->data);
-	f->data = NULL;
-}
-
-int msnd_fifo_alloc(msnd_fifo *f, size_t n)
-{
-	msnd_fifo_free(f);
-	f->data = vmalloc(n);
-	f->n = n;
-	f->tail = 0;
-	f->head = 0;
-	f->len = 0;
-
-	if (!f->data)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void msnd_fifo_make_empty(msnd_fifo *f)
-{
-	f->len = f->tail = f->head = 0;
-}
-
-int msnd_fifo_write_io(msnd_fifo *f, char __iomem *buf, size_t len)
-{
-	int count = 0;
-
-	while ((count < len) && (f->len != f->n)) {
-
-		int nwritten;
-
-		if (f->head <= f->tail) {
-			nwritten = len - count;
-			if (nwritten > f->n - f->tail)
-				nwritten = f->n - f->tail;
-		}
-		else {
-			nwritten = f->head - f->tail;
-			if (nwritten > len - count)
-				nwritten = len - count;
-		}
-
-		memcpy_fromio(f->data + f->tail, buf, nwritten);
-
-		count += nwritten;
-		buf += nwritten;
-		f->len += nwritten;
-		f->tail += nwritten;
-		f->tail %= f->n;
-	}
-
-	return count;
-}
-
-int msnd_fifo_write(msnd_fifo *f, const char *buf, size_t len)
-{
-	int count = 0;
-
-	while ((count < len) && (f->len != f->n)) {
-
-		int nwritten;
-
-		if (f->head <= f->tail) {
-			nwritten = len - count;
-			if (nwritten > f->n - f->tail)
-				nwritten = f->n - f->tail;
-		}
-		else {
-			nwritten = f->head - f->tail;
-			if (nwritten > len - count)
-				nwritten = len - count;
-		}
-
-		memcpy(f->data + f->tail, buf, nwritten);
-
-		count += nwritten;
-		buf += nwritten;
-		f->len += nwritten;
-		f->tail += nwritten;
-		f->tail %= f->n;
-	}
-
-	return count;
-}
-
-int msnd_fifo_read_io(msnd_fifo *f, char __iomem *buf, size_t len)
-{
-	int count = 0;
-
-	while ((count < len) && (f->len > 0)) {
-
-		int nread;
-
-		if (f->tail <= f->head) {
-			nread = len - count;
-			if (nread > f->n - f->head)
-				nread = f->n - f->head;
-		}
-		else {
-			nread = f->tail - f->head;
-			if (nread > len - count)
-				nread = len - count;
-		}
-
-		memcpy_toio(buf, f->data + f->head, nread);
-
-		count += nread;
-		buf += nread;
-		f->len -= nread;
-		f->head += nread;
-		f->head %= f->n;
-	}
-
-	return count;
-}
-
-int msnd_fifo_read(msnd_fifo *f, char *buf, size_t len)
-{
-	int count = 0;
-
-	while ((count < len) && (f->len > 0)) {
-
-		int nread;
-
-		if (f->tail <= f->head) {
-			nread = len - count;
-			if (nread > f->n - f->head)
-				nread = f->n - f->head;
-		}
-		else {
-			nread = f->tail - f->head;
-			if (nread > len - count)
-				nread = len - count;
-		}
-
-		memcpy(buf, f->data + f->head, nread);
-
-		count += nread;
-		buf += nread;
-		f->len -= nread;
-		f->head += nread;
-		f->head %= f->n;
-	}
-
-	return count;
-}
-
-static int msnd_wait_TXDE(multisound_dev_t *dev)
-{
-	register unsigned int io = dev->io;
-	register int timeout = 1000;
-    
-	while(timeout-- > 0)
-		if (msnd_inb(io + HP_ISR) & HPISR_TXDE)
-			return 0;
-
-	return -EIO;
-}
-
-static int msnd_wait_HC0(multisound_dev_t *dev)
-{
-	register unsigned int io = dev->io;
-	register int timeout = 1000;
-
-	while(timeout-- > 0)
-		if (!(msnd_inb(io + HP_CVR) & HPCVR_HC))
-			return 0;
-
-	return -EIO;
-}
-
-int msnd_send_dsp_cmd(multisound_dev_t *dev, BYTE cmd)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (msnd_wait_HC0(dev) == 0) {
-		msnd_outb(cmd, dev->io + HP_CVR);
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return 0;
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	printk(KERN_DEBUG LOGNAME ": Send DSP command timeout\n");
-
-	return -EIO;
-}
-
-int msnd_send_word(multisound_dev_t *dev, unsigned char high,
-		   unsigned char mid, unsigned char low)
-{
-	register unsigned int io = dev->io;
-
-	if (msnd_wait_TXDE(dev) == 0) {
-		msnd_outb(high, io + HP_TXH);
-		msnd_outb(mid, io + HP_TXM);
-		msnd_outb(low, io + HP_TXL);
-		return 0;
-	}
-
-	printk(KERN_DEBUG LOGNAME ": Send host word timeout\n");
-
-	return -EIO;
-}
-
-int msnd_upload_host(multisound_dev_t *dev, char *bin, int len)
-{
-	int i;
-
-	if (len % 3 != 0) {
-		printk(KERN_WARNING LOGNAME ": Upload host data not multiple of 3!\n");		
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i += 3)
-		if (msnd_send_word(dev, bin[i], bin[i + 1], bin[i + 2]) != 0)
-			return -EIO;
-
-	msnd_inb(dev->io + HP_RXL);
-	msnd_inb(dev->io + HP_CVR);
-
-	return 0;
-}
-
-int msnd_enable_irq(multisound_dev_t *dev)
-{
-	unsigned long flags;
-
-	if (dev->irq_ref++)
-		return 0;
-
-	printk(KERN_DEBUG LOGNAME ": Enabling IRQ\n");
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (msnd_wait_TXDE(dev) == 0) {
-		msnd_outb(msnd_inb(dev->io + HP_ICR) | HPICR_TREQ, dev->io + HP_ICR);
-		if (dev->type == msndClassic)
-			msnd_outb(dev->irqid, dev->io + HP_IRQM);
-		msnd_outb(msnd_inb(dev->io + HP_ICR) & ~HPICR_TREQ, dev->io + HP_ICR);
-		msnd_outb(msnd_inb(dev->io + HP_ICR) | HPICR_RREQ, dev->io + HP_ICR);
-		enable_irq(dev->irq);
-		msnd_init_queue(dev->DSPQ, dev->dspq_data_buff, dev->dspq_buff_size);
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return 0;
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	printk(KERN_DEBUG LOGNAME ": Enable IRQ failed\n");
-
-	return -EIO;
-}
-
-int msnd_disable_irq(multisound_dev_t *dev)
-{
-	unsigned long flags;
-
-	if (--dev->irq_ref > 0)
-		return 0;
-
-	if (dev->irq_ref < 0)
-		printk(KERN_DEBUG LOGNAME ": IRQ ref count is %d\n", dev->irq_ref);
-
-	printk(KERN_DEBUG LOGNAME ": Disabling IRQ\n");
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (msnd_wait_TXDE(dev) == 0) {
-		msnd_outb(msnd_inb(dev->io + HP_ICR) & ~HPICR_RREQ, dev->io + HP_ICR);
-		if (dev->type == msndClassic)
-			msnd_outb(HPIRQ_NONE, dev->io + HP_IRQM);
-		disable_irq(dev->irq);
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return 0;
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	printk(KERN_DEBUG LOGNAME ": Disable IRQ failed\n");
-
-	return -EIO;
-}
-
-#ifndef LINUX20
-EXPORT_SYMBOL(msnd_register);
-EXPORT_SYMBOL(msnd_unregister);
-
-EXPORT_SYMBOL(msnd_init_queue);
-
-EXPORT_SYMBOL(msnd_fifo_init);
-EXPORT_SYMBOL(msnd_fifo_free);
-EXPORT_SYMBOL(msnd_fifo_alloc);
-EXPORT_SYMBOL(msnd_fifo_make_empty);
-EXPORT_SYMBOL(msnd_fifo_write_io);
-EXPORT_SYMBOL(msnd_fifo_read_io);
-EXPORT_SYMBOL(msnd_fifo_write);
-EXPORT_SYMBOL(msnd_fifo_read);
-
-EXPORT_SYMBOL(msnd_send_dsp_cmd);
-EXPORT_SYMBOL(msnd_send_word);
-EXPORT_SYMBOL(msnd_upload_host);
-
-EXPORT_SYMBOL(msnd_enable_irq);
-EXPORT_SYMBOL(msnd_disable_irq);
-#endif
-
-#ifdef MODULE
-MODULE_AUTHOR				("Andrew Veliath <andrewtv@usa.net>");
-MODULE_DESCRIPTION			("Turtle Beach MultiSound Driver Base");
-MODULE_LICENSE("GPL");
-
-
-int init_module(void)
-{
-	return 0;
-}
-
-void cleanup_module(void)
-{
-}
-#endif
diff --git a/sound/oss/msnd.h b/sound/oss/msnd.h
deleted file mode 100644
index c8be47ec2b7e..000000000000
--- a/sound/oss/msnd.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*********************************************************************
- *
- * msnd.h
- *
- * Turtle Beach MultiSound Sound Card Driver for Linux
- *
- * Some parts of this header file were derived from the Turtle Beach
- * MultiSound Driver Development Kit.
- *
- * Copyright (C) 1998 Andrew Veliath
- * Copyright (C) 1993 Turtle Beach Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- ********************************************************************/
-#ifndef __MSND_H
-#define __MSND_H
-
-#define VERSION			"0.8.3.1"
-
-#define DEFSAMPLERATE		DSP_DEFAULT_SPEED
-#define DEFSAMPLESIZE		AFMT_U8
-#define DEFCHANNELS		1
-
-#define DEFFIFOSIZE		128
-
-#define SNDCARD_MSND		38
-
-#define SRAM_BANK_SIZE		0x8000
-#define SRAM_CNTL_START		0x7F00
-
-#define DSP_BASE_ADDR		0x4000
-#define DSP_BANK_BASE		0x4000
-
-#define	HP_ICR			0x00
-#define	HP_CVR			0x01
-#define	HP_ISR			0x02
-#define	HP_IVR			0x03
-#define HP_NU			0x04
-#define HP_INFO			0x04
-#define	HP_TXH			0x05
-#define	HP_RXH			0x05
-#define	HP_TXM			0x06
-#define	HP_RXM			0x06
-#define	HP_TXL			0x07
-#define	HP_RXL			0x07
-
-#define HP_ICR_DEF		0x00
-#define HP_CVR_DEF		0x12
-#define HP_ISR_DEF		0x06
-#define HP_IVR_DEF		0x0f
-#define HP_NU_DEF		0x00
-
-#define	HP_IRQM			0x09
-
-#define	HPR_BLRC		0x08
-#define	HPR_SPR1		0x09
-#define	HPR_SPR2		0x0A
-#define	HPR_TCL0		0x0B
-#define	HPR_TCL1		0x0C
-#define	HPR_TCL2		0x0D
-#define	HPR_TCL3		0x0E
-#define	HPR_TCL4		0x0F
-
-#define	HPICR_INIT		0x80
-#define HPICR_HM1		0x40
-#define HPICR_HM0		0x20
-#define HPICR_HF1		0x10
-#define HPICR_HF0		0x08
-#define	HPICR_TREQ		0x02
-#define	HPICR_RREQ		0x01
-
-#define HPCVR_HC		0x80
-
-#define	HPISR_HREQ		0x80
-#define HPISR_DMA		0x40
-#define HPISR_HF3		0x10
-#define HPISR_HF2		0x08
-#define	HPISR_TRDY		0x04
-#define	HPISR_TXDE		0x02
-#define	HPISR_RXDF		0x01
-
-#define	HPIO_290		0
-#define	HPIO_260		1
-#define	HPIO_250		2
-#define	HPIO_240		3
-#define	HPIO_230		4
-#define	HPIO_220		5
-#define	HPIO_210		6
-#define	HPIO_3E0		7
-
-#define	HPMEM_NONE		0
-#define	HPMEM_B000		1
-#define	HPMEM_C800		2
-#define	HPMEM_D000		3
-#define	HPMEM_D400		4
-#define	HPMEM_D800		5
-#define	HPMEM_E000		6
-#define	HPMEM_E800		7
-
-#define	HPIRQ_NONE		0
-#define HPIRQ_5			1
-#define HPIRQ_7			2
-#define HPIRQ_9			3
-#define HPIRQ_10		4
-#define HPIRQ_11		5
-#define HPIRQ_12		6
-#define HPIRQ_15		7
-
-#define	HIMT_PLAY_DONE		0x00
-#define	HIMT_RECORD_DONE	0x01
-#define	HIMT_MIDI_EOS		0x02
-#define	HIMT_MIDI_OUT		0x03
-
-#define	HIMT_MIDI_IN_UCHAR	0x0E
-#define	HIMT_DSP		0x0F
-
-#define	HDEX_BASE	       	0x92
-#define	HDEX_PLAY_START		(0 + HDEX_BASE)
-#define	HDEX_PLAY_STOP		(1 + HDEX_BASE)
-#define	HDEX_PLAY_PAUSE		(2 + HDEX_BASE)
-#define	HDEX_PLAY_RESUME	(3 + HDEX_BASE)
-#define	HDEX_RECORD_START	(4 + HDEX_BASE)
-#define	HDEX_RECORD_STOP	(5 + HDEX_BASE)
-#define	HDEX_MIDI_IN_START 	(6 + HDEX_BASE)
-#define	HDEX_MIDI_IN_STOP	(7 + HDEX_BASE)
-#define	HDEX_MIDI_OUT_START	(8 + HDEX_BASE)
-#define	HDEX_MIDI_OUT_STOP	(9 + HDEX_BASE)
-#define	HDEX_AUX_REQ		(10 + HDEX_BASE)
-
-#define HIWORD(l)		((WORD)((((DWORD)(l)) >> 16) & 0xFFFF))
-#define LOWORD(l)		((WORD)(DWORD)(l))
-#define HIBYTE(w)		((BYTE)(((WORD)(w) >> 8) & 0xFF))
-#define LOBYTE(w)		((BYTE)(w))
-#define MAKELONG(low,hi)	((long)(((WORD)(low))|(((DWORD)((WORD)(hi)))<<16)))
-#define MAKEWORD(low,hi)	((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8)))
-
-#define PCTODSP_OFFSET(w)	(USHORT)((w)/2)
-#define PCTODSP_BASED(w)	(USHORT)(((w)/2) + DSP_BASE_ADDR)
-#define DSPTOPC_BASED(w)	(((w) - DSP_BASE_ADDR) * 2)
-
-#ifdef SLOWIO
-#define msnd_outb			outb_p
-#define msnd_inb			inb_p
-#else
-#define msnd_outb			outb
-#define msnd_inb			inb
-#endif
-
-/* JobQueueStruct */
-#define JQS_wStart		0x00
-#define JQS_wSize		0x02
-#define JQS_wHead		0x04
-#define JQS_wTail		0x06
-#define JQS__size		0x08
-
-/* DAQueueDataStruct */
-#define DAQDS_wStart		0x00
-#define DAQDS_wSize		0x02
-#define DAQDS_wFormat		0x04
-#define DAQDS_wSampleSize	0x06
-#define DAQDS_wChannels		0x08
-#define DAQDS_wSampleRate	0x0A
-#define DAQDS_wIntMsg		0x0C
-#define DAQDS_wFlags		0x0E
-#define DAQDS__size		0x10
-
-typedef u8			BYTE;
-typedef u16			USHORT;
-typedef u16			WORD;
-typedef u32			DWORD;
-typedef void __iomem *		LPDAQD;
-
-/* Generic FIFO */
-typedef struct {
-	size_t n, len;
-	char *data;
-	int head, tail;
-} msnd_fifo;
-
-typedef struct multisound_dev {
-	/* Linux device info */
-	char *name;
-	int dsp_minor, mixer_minor;
-	int ext_midi_dev, hdr_midi_dev;
-
-	/* Hardware resources */
-	int io, numio;
-	int memid, irqid;
-	int irq, irq_ref;
-	unsigned char info;
-	void __iomem *base;
-
-	/* Motorola 56k DSP SMA */
-	void __iomem *SMA;
-	void __iomem *DAPQ, *DARQ, *MODQ, *MIDQ, *DSPQ;
-	void __iomem *pwDSPQData, *pwMIDQData, *pwMODQData;
-	int dspq_data_buff, dspq_buff_size;
-
-	/* State variables */
-	enum { msndClassic, msndPinnacle } type;
-	fmode_t mode;
-	unsigned long flags;
-#define F_RESETTING			0
-#define F_HAVEDIGITAL			1
-#define F_AUDIO_WRITE_INUSE		2
-#define F_WRITING			3
-#define F_WRITEBLOCK			4
-#define F_WRITEFLUSH			5
-#define F_AUDIO_READ_INUSE		6
-#define F_READING			7
-#define F_READBLOCK			8
-#define F_EXT_MIDI_INUSE		9
-#define F_HDR_MIDI_INUSE		10
-#define F_DISABLE_WRITE_NDELAY		11
-	wait_queue_head_t writeblock;
-	wait_queue_head_t readblock;
-	wait_queue_head_t writeflush;
-	spinlock_t lock;
-	int nresets;
-	unsigned long recsrc;
-	int left_levels[32];
-	int right_levels[32];
-	int mixer_mod_count;
-	int calibrate_signal;
-	int play_sample_size, play_sample_rate, play_channels;
-	int play_ndelay;
-	int rec_sample_size, rec_sample_rate, rec_channels;
-	int rec_ndelay;
-	BYTE bCurrentMidiPatch;
-
-	/* Digital audio FIFOs */
-	msnd_fifo DAPF, DARF;
-	int fifosize;
-	int last_playbank, last_recbank;
-
-	/* MIDI in callback */
-	void (*midi_in_interrupt)(struct multisound_dev *);
-} multisound_dev_t;
-
-#ifndef mdelay
-#  define mdelay(a)		udelay((a) * 1000)
-#endif
-
-int				msnd_register(multisound_dev_t *dev);
-void				msnd_unregister(multisound_dev_t *dev);
-
-void				msnd_init_queue(void __iomem *, int start, int size);
-
-void				msnd_fifo_init(msnd_fifo *f);
-void				msnd_fifo_free(msnd_fifo *f);
-int				msnd_fifo_alloc(msnd_fifo *f, size_t n);
-void				msnd_fifo_make_empty(msnd_fifo *f);
-int				msnd_fifo_write_io(msnd_fifo *f, char __iomem *buf, size_t len);
-int				msnd_fifo_read_io(msnd_fifo *f, char __iomem *buf, size_t len);
-int				msnd_fifo_write(msnd_fifo *f, const char *buf, size_t len);
-int				msnd_fifo_read(msnd_fifo *f, char *buf, size_t len);
-
-int				msnd_send_dsp_cmd(multisound_dev_t *dev, BYTE cmd);
-int				msnd_send_word(multisound_dev_t *dev, unsigned char high,
-					       unsigned char mid, unsigned char low);
-int				msnd_upload_host(multisound_dev_t *dev, char *bin, int len);
-int				msnd_enable_irq(multisound_dev_t *dev);
-int				msnd_disable_irq(multisound_dev_t *dev);
-
-#endif /* __MSND_H */
diff --git a/sound/oss/msnd_classic.c b/sound/oss/msnd_classic.c
deleted file mode 100644
index 3b23a096fa4e..000000000000
--- a/sound/oss/msnd_classic.c
+++ /dev/null
@@ -1,3 +0,0 @@
-/* The work is in msnd_pinnacle.c, just define MSND_CLASSIC before it. */
-#define MSND_CLASSIC
-#include "msnd_pinnacle.c"
diff --git a/sound/oss/msnd_classic.h b/sound/oss/msnd_classic.h
deleted file mode 100644
index 1a17dde2f650..000000000000
--- a/sound/oss/msnd_classic.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*********************************************************************
- *
- * msnd_classic.h
- *
- * Turtle Beach MultiSound Sound Card Driver for Linux
- *
- * Some parts of this header file were derived from the Turtle Beach
- * MultiSound Driver Development Kit.
- *
- * Copyright (C) 1998 Andrew Veliath
- * Copyright (C) 1993 Turtle Beach Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * 
- ********************************************************************/
-#ifndef __MSND_CLASSIC_H
-#define __MSND_CLASSIC_H
-
-
-#define DSP_NUMIO				0x10
-
-#define	HP_MEMM					0x08
-
-#define	HP_BITM					0x0E
-#define	HP_WAIT					0x0D
-#define	HP_DSPR					0x0A
-#define	HP_PROR					0x0B
-#define	HP_BLKS					0x0C
-
-#define	HPPRORESET_OFF				0
-#define HPPRORESET_ON				1
-
-#define HPDSPRESET_OFF				0
-#define HPDSPRESET_ON				1
-
-#define HPBLKSEL_0				0
-#define HPBLKSEL_1				1
-
-#define HPWAITSTATE_0				0
-#define HPWAITSTATE_1				1
-
-#define HPBITMODE_16				0
-#define HPBITMODE_8				1
-
-#define	HIDSP_INT_PLAY_UNDER			0x00
-#define	HIDSP_INT_RECORD_OVER			0x01
-#define	HIDSP_INPUT_CLIPPING			0x02
-#define	HIDSP_MIDI_IN_OVER			0x10
-#define	HIDSP_MIDI_OVERRUN_ERR  0x13
-
-#define	HDEXAR_CLEAR_PEAKS			1
-#define	HDEXAR_IN_SET_POTS			2
-#define	HDEXAR_AUX_SET_POTS			3
-#define	HDEXAR_CAL_A_TO_D			4
-#define	HDEXAR_RD_EXT_DSP_BITS			5
-
-#define TIME_PRO_RESET_DONE			0x028A
-#define TIME_PRO_SYSEX				0x0040
-#define TIME_PRO_RESET				0x0032
-
-#define AGND					0x01
-#define SIGNAL					0x02
-
-#define EXT_DSP_BIT_DCAL			0x0001
-#define EXT_DSP_BIT_MIDI_CON			0x0002
-
-#define BUFFSIZE				0x8000
-#define HOSTQ_SIZE				0x40
-
-#define SRAM_CNTL_START				0x7F00
-#define SMA_STRUCT_START			0x7F40
-
-#define DAP_BUFF_SIZE				0x2400
-#define DAR_BUFF_SIZE				0x2000
-
-#define DAPQ_STRUCT_SIZE			0x10
-#define DARQ_STRUCT_SIZE			0x10
-#define DAPQ_BUFF_SIZE				(3 * 0x10)
-#define DARQ_BUFF_SIZE				(3 * 0x10)
-#define MODQ_BUFF_SIZE				0x400
-#define MIDQ_BUFF_SIZE				0x200
-#define DSPQ_BUFF_SIZE				0x40
-
-#define DAPQ_DATA_BUFF				0x6C00
-#define DARQ_DATA_BUFF				0x6C30
-#define MODQ_DATA_BUFF				0x6C60
-#define MIDQ_DATA_BUFF				0x7060
-#define DSPQ_DATA_BUFF				0x7260
-
-#define DAPQ_OFFSET				SRAM_CNTL_START
-#define DARQ_OFFSET				(SRAM_CNTL_START + 0x08)
-#define MODQ_OFFSET				(SRAM_CNTL_START + 0x10)
-#define MIDQ_OFFSET				(SRAM_CNTL_START + 0x18)
-#define DSPQ_OFFSET				(SRAM_CNTL_START + 0x20)
-
-#define MOP_SYNTH				0x10
-#define MOP_EXTOUT				0x32
-#define MOP_EXTTHRU				0x02
-#define MOP_OUTMASK				0x01
-
-#define MIP_EXTIN				0x01
-#define MIP_SYNTH				0x00
-#define MIP_INMASK				0x32
-
-/* Classic SMA Common Data */
-#define SMA_wCurrPlayBytes			0x0000
-#define SMA_wCurrRecordBytes			0x0002
-#define SMA_wCurrPlayVolLeft			0x0004
-#define SMA_wCurrPlayVolRight			0x0006
-#define SMA_wCurrInVolLeft			0x0008
-#define SMA_wCurrInVolRight			0x000a
-#define SMA_wUser_3				0x000c
-#define SMA_wUser_4				0x000e
-#define SMA_dwUser_5				0x0010
-#define SMA_dwUser_6				0x0014
-#define SMA_wUser_7				0x0018
-#define SMA_wReserved_A				0x001a
-#define SMA_wReserved_B				0x001c
-#define SMA_wReserved_C				0x001e
-#define SMA_wReserved_D				0x0020
-#define SMA_wReserved_E				0x0022
-#define SMA_wReserved_F				0x0024
-#define SMA_wReserved_G				0x0026
-#define SMA_wReserved_H				0x0028
-#define SMA_wCurrDSPStatusFlags			0x002a
-#define SMA_wCurrHostStatusFlags		0x002c
-#define SMA_wCurrInputTagBits			0x002e
-#define SMA_wCurrLeftPeak			0x0030
-#define SMA_wCurrRightPeak			0x0032
-#define SMA_wExtDSPbits				0x0034
-#define SMA_bExtHostbits			0x0036
-#define SMA_bBoardLevel				0x0037
-#define SMA_bInPotPosRight			0x0038
-#define SMA_bInPotPosLeft			0x0039
-#define SMA_bAuxPotPosRight			0x003a
-#define SMA_bAuxPotPosLeft			0x003b
-#define SMA_wCurrMastVolLeft			0x003c
-#define SMA_wCurrMastVolRight			0x003e
-#define SMA_bUser_12				0x0040
-#define SMA_bUser_13				0x0041
-#define SMA_wUser_14				0x0042
-#define SMA_wUser_15				0x0044
-#define SMA_wCalFreqAtoD			0x0046
-#define SMA_wUser_16				0x0048
-#define SMA_wUser_17				0x004a
-#define SMA__size				0x004c
-
-#ifdef HAVE_DSPCODEH
-#  include "msndperm.c"
-#  include "msndinit.c"
-#  define PERMCODE		msndperm
-#  define INITCODE		msndinit
-#  define PERMCODESIZE		sizeof(msndperm)
-#  define INITCODESIZE		sizeof(msndinit)
-#else
-#  ifndef CONFIG_MSNDCLAS_INIT_FILE
-#    define CONFIG_MSNDCLAS_INIT_FILE				\
-				"/etc/sound/msndinit.bin"
-#  endif
-#  ifndef CONFIG_MSNDCLAS_PERM_FILE
-#    define CONFIG_MSNDCLAS_PERM_FILE				\
-				"/etc/sound/msndperm.bin"
-#  endif
-#  define PERMCODEFILE		CONFIG_MSNDCLAS_PERM_FILE
-#  define INITCODEFILE		CONFIG_MSNDCLAS_INIT_FILE
-#  define PERMCODE		dspini
-#  define INITCODE		permini
-#  define PERMCODESIZE		sizeof_dspini
-#  define INITCODESIZE		sizeof_permini
-#endif
-#define LONGNAME		"MultiSound (Classic/Monterey/Tahiti)"
-
-#endif /* __MSND_CLASSIC_H */
diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c
deleted file mode 100644
index d2abc2cf3213..000000000000
--- a/sound/oss/msnd_pinnacle.c
+++ /dev/null
@@ -1,1941 +0,0 @@
-/*********************************************************************
- *
- * Turtle Beach MultiSound Sound Card Driver for Linux
- * Linux 2.0/2.2 Version
- *
- * msnd_pinnacle.c / msnd_classic.c
- *
- * -- If MSND_CLASSIC is defined:
- *
- *     -> driver for Turtle Beach Classic/Monterey/Tahiti
- *
- * -- Else
- *
- *     -> driver for Turtle Beach Pinnacle/Fiji
- *
- * Copyright (C) 1998 Andrew Veliath
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * 12-3-2000  Modified IO port validation  Steve Sycamore
- *
- ********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/gfp.h>
-#include <linux/sched/signal.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include "sound_config.h"
-#include "sound_firmware.h"
-#ifdef MSND_CLASSIC
-# ifndef __alpha__
-#  define SLOWIO
-# endif
-#endif
-#include "msnd.h"
-#ifdef MSND_CLASSIC
-#  ifdef CONFIG_MSNDCLAS_HAVE_BOOT
-#    define HAVE_DSPCODEH
-#  endif
-#  include "msnd_classic.h"
-#  define LOGNAME			"msnd_classic"
-#else
-#  ifdef CONFIG_MSNDPIN_HAVE_BOOT
-#    define HAVE_DSPCODEH
-#  endif
-#  include "msnd_pinnacle.h"
-#  define LOGNAME			"msnd_pinnacle"
-#endif
-
-#ifndef CONFIG_MSND_WRITE_NDELAY
-#  define CONFIG_MSND_WRITE_NDELAY	1
-#endif
-
-#define get_play_delay_jiffies(size)	((size) * HZ *			\
-					 dev.play_sample_size / 8 /	\
-					 dev.play_sample_rate /		\
-					 dev.play_channels)
-
-#define get_rec_delay_jiffies(size)	((size) * HZ *			\
-					 dev.rec_sample_size / 8 /	\
-					 dev.rec_sample_rate /		\
-					 dev.rec_channels)
-
-static DEFINE_MUTEX(msnd_pinnacle_mutex);
-static multisound_dev_t			dev;
-
-#ifndef HAVE_DSPCODEH
-static char				*dspini, *permini;
-static int				sizeof_dspini, sizeof_permini;
-#endif
-
-static int				dsp_full_reset(void);
-static void				dsp_write_flush(void);
-
-static __inline__ int chk_send_dsp_cmd(multisound_dev_t *dev, register BYTE cmd)
-{
-	if (msnd_send_dsp_cmd(dev, cmd) == 0)
-		return 0;
-	dsp_full_reset();
-	return msnd_send_dsp_cmd(dev, cmd);
-}
-
-static void reset_play_queue(void)
-{
-	int n;
-	LPDAQD lpDAQ;
-
-	dev.last_playbank = -1;
-	writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DAPQ + JQS_wHead);
-	writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DAPQ + JQS_wTail);
-
-	for (n = 0, lpDAQ = dev.base + DAPQ_DATA_BUFF; n < 3; ++n, lpDAQ += DAQDS__size) {
-		writew(PCTODSP_BASED((DWORD)(DAP_BUFF_SIZE * n)), lpDAQ + DAQDS_wStart);
-		writew(0, lpDAQ + DAQDS_wSize);
-		writew(1, lpDAQ + DAQDS_wFormat);
-		writew(dev.play_sample_size, lpDAQ + DAQDS_wSampleSize);
-		writew(dev.play_channels, lpDAQ + DAQDS_wChannels);
-		writew(dev.play_sample_rate, lpDAQ + DAQDS_wSampleRate);
-		writew(HIMT_PLAY_DONE * 0x100 + n, lpDAQ + DAQDS_wIntMsg);
-		writew(n, lpDAQ + DAQDS_wFlags);
-	}
-}
-
-static void reset_record_queue(void)
-{
-	int n;
-	LPDAQD lpDAQ;
-	unsigned long flags;
-
-	dev.last_recbank = 2;
-	writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DARQ + JQS_wHead);
-	writew(PCTODSP_OFFSET(dev.last_recbank * DAQDS__size), dev.DARQ + JQS_wTail);
-
-	/* Critical section: bank 1 access */
-	spin_lock_irqsave(&dev.lock, flags);
-	msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS);
-	memset_io(dev.base, 0, DAR_BUFF_SIZE * 3);
-	msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
-	spin_unlock_irqrestore(&dev.lock, flags);
-
-	for (n = 0, lpDAQ = dev.base + DARQ_DATA_BUFF; n < 3; ++n, lpDAQ += DAQDS__size) {
-		writew(PCTODSP_BASED((DWORD)(DAR_BUFF_SIZE * n)) + 0x4000, lpDAQ + DAQDS_wStart);
-		writew(DAR_BUFF_SIZE, lpDAQ + DAQDS_wSize);
-		writew(1, lpDAQ + DAQDS_wFormat);
-		writew(dev.rec_sample_size, lpDAQ + DAQDS_wSampleSize);
-		writew(dev.rec_channels, lpDAQ + DAQDS_wChannels);
-		writew(dev.rec_sample_rate, lpDAQ + DAQDS_wSampleRate);
-		writew(HIMT_RECORD_DONE * 0x100 + n, lpDAQ + DAQDS_wIntMsg);
-		writew(n, lpDAQ + DAQDS_wFlags);
-	}
-}
-
-static void reset_queues(void)
-{
-	if (dev.mode & FMODE_WRITE) {
-		msnd_fifo_make_empty(&dev.DAPF);
-		reset_play_queue();
-	}
-	if (dev.mode & FMODE_READ) {
-		msnd_fifo_make_empty(&dev.DARF);
-		reset_record_queue();
-	}
-}
-
-static int dsp_set_format(struct file *file, int val)
-{
-	int data, i;
-	LPDAQD lpDAQ, lpDARQ;
-
-	lpDAQ = dev.base + DAPQ_DATA_BUFF;
-	lpDARQ = dev.base + DARQ_DATA_BUFF;
-
-	switch (val) {
-	case AFMT_U8:
-	case AFMT_S16_LE:
-		data = val;
-		break;
-	default:
-		data = DEFSAMPLESIZE;
-		break;
-	}
-
-	for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) {
-		if (file->f_mode & FMODE_WRITE)
-			writew(data, lpDAQ + DAQDS_wSampleSize);
-		if (file->f_mode & FMODE_READ)
-			writew(data, lpDARQ + DAQDS_wSampleSize);
-	}
-	if (file->f_mode & FMODE_WRITE)
-		dev.play_sample_size = data;
-	if (file->f_mode & FMODE_READ)
-		dev.rec_sample_size = data;
-
-	return data;
-}
-
-static int dsp_get_frag_size(void)
-{
-	int size;
-	size = dev.fifosize / 4;
-	if (size > 32 * 1024)
-		size = 32 * 1024;
-	return size;
-}
-
-static int dsp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int val, i, data, tmp;
-	LPDAQD lpDAQ, lpDARQ;
-        audio_buf_info abinfo;
-	unsigned long flags;
-	int __user *p = (int __user *)arg;
-
-	lpDAQ = dev.base + DAPQ_DATA_BUFF;
-	lpDARQ = dev.base + DARQ_DATA_BUFF;
-
-	switch (cmd) {
-	case SNDCTL_DSP_SUBDIVIDE:
-	case SNDCTL_DSP_SETFRAGMENT:
-	case SNDCTL_DSP_SETDUPLEX:
-	case SNDCTL_DSP_POST:
-		return 0;
-
-	case SNDCTL_DSP_GETIPTR:
-	case SNDCTL_DSP_GETOPTR:
-	case SNDCTL_DSP_MAPINBUF:
-	case SNDCTL_DSP_MAPOUTBUF:
-		return -EINVAL;
-
-	case SNDCTL_DSP_GETOSPACE:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		spin_lock_irqsave(&dev.lock, flags);
-		abinfo.fragsize = dsp_get_frag_size();
-                abinfo.bytes = dev.DAPF.n - dev.DAPF.len;
-                abinfo.fragstotal = dev.DAPF.n / abinfo.fragsize;
-                abinfo.fragments = abinfo.bytes / abinfo.fragsize;
-		spin_unlock_irqrestore(&dev.lock, flags);
-		return copy_to_user((void __user *)arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_GETISPACE:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		spin_lock_irqsave(&dev.lock, flags);
-		abinfo.fragsize = dsp_get_frag_size();
-                abinfo.bytes = dev.DARF.n - dev.DARF.len;
-                abinfo.fragstotal = dev.DARF.n / abinfo.fragsize;
-                abinfo.fragments = abinfo.bytes / abinfo.fragsize;
-		spin_unlock_irqrestore(&dev.lock, flags);
-		return copy_to_user((void __user *)arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_RESET:
-		dev.nresets = 0;
-		reset_queues();
-		return 0;
-
-	case SNDCTL_DSP_SYNC:
-		dsp_write_flush();
-		return 0;
-
-	case SNDCTL_DSP_GETBLKSIZE:
-		tmp = dsp_get_frag_size();
-		if (put_user(tmp, p))
-                        return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_GETFMTS:
-		val = AFMT_S16_LE | AFMT_U8;
-		if (put_user(val, p))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_SETFMT:
-		if (get_user(val, p))
-			return -EFAULT;
-
-		if (file->f_mode & FMODE_WRITE)
-			data = val == AFMT_QUERY
-				? dev.play_sample_size
-				: dsp_set_format(file, val);
-		else
-			data = val == AFMT_QUERY
-				? dev.rec_sample_size
-				: dsp_set_format(file, val);
-
-		if (put_user(data, p))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_NONBLOCK:
-		if (!test_bit(F_DISABLE_WRITE_NDELAY, &dev.flags) &&
-		    file->f_mode & FMODE_WRITE)
-			dev.play_ndelay = 1;
-		if (file->f_mode & FMODE_READ)
-			dev.rec_ndelay = 1;
-		return 0;
-
-	case SNDCTL_DSP_GETCAPS:
-		val = DSP_CAP_DUPLEX | DSP_CAP_BATCH;
-		if (put_user(val, p))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_SPEED:
-		if (get_user(val, p))
-			return -EFAULT;
-
-		if (val < 8000)
-			val = 8000;
-
-		if (val > 48000)
-			val = 48000;
-
-		data = val;
-
-		for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) {
-			if (file->f_mode & FMODE_WRITE)
-				writew(data, lpDAQ + DAQDS_wSampleRate);
-			if (file->f_mode & FMODE_READ)
-				writew(data, lpDARQ + DAQDS_wSampleRate);
-		}
-		if (file->f_mode & FMODE_WRITE)
-			dev.play_sample_rate = data;
-		if (file->f_mode & FMODE_READ)
-			dev.rec_sample_rate = data;
-
-		if (put_user(data, p))
-			return -EFAULT;
-		return 0;
-
-	case SNDCTL_DSP_CHANNELS:
-	case SNDCTL_DSP_STEREO:
-		if (get_user(val, p))
-			return -EFAULT;
-
-		if (cmd == SNDCTL_DSP_CHANNELS) {
-			switch (val) {
-			case 1:
-			case 2:
-				data = val;
-				break;
-			default:
-				val = data = 2;
-				break;
-			}
-		} else {
-			switch (val) {
-			case 0:
-				data = 1;
-				break;
-			default:
-				val = 1;
-			case 1:
-				data = 2;
-				break;
-			}
-		}
-
-		for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) {
-			if (file->f_mode & FMODE_WRITE)
-				writew(data, lpDAQ + DAQDS_wChannels);
-			if (file->f_mode & FMODE_READ)
-				writew(data, lpDARQ + DAQDS_wChannels);
-		}
-		if (file->f_mode & FMODE_WRITE)
-			dev.play_channels = data;
-		if (file->f_mode & FMODE_READ)
-			dev.rec_channels = data;
-
-		if (put_user(val, p))
-			return -EFAULT;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int mixer_get(int d)
-{
-	if (d > 31)
-		return -EINVAL;
-
-	switch (d) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_PCM:
-	case SOUND_MIXER_LINE:
-	case SOUND_MIXER_IMIX:
-	case SOUND_MIXER_LINE1:
-#ifndef MSND_CLASSIC
-	case SOUND_MIXER_MIC:
-	case SOUND_MIXER_SYNTH:
-#endif
-		return (dev.left_levels[d] >> 8) * 100 / 0xff | 
-			(((dev.right_levels[d] >> 8) * 100 / 0xff) << 8);
-	default:
-		return 0;
-	}
-}
-
-#define update_volm(a,b)						\
-	writew((dev.left_levels[a] >> 1) *				\
-	       readw(dev.SMA + SMA_wCurrMastVolLeft) / 0xffff,	\
-	       dev.SMA + SMA_##b##Left);				\
-	writew((dev.right_levels[a] >> 1)  *			\
-	       readw(dev.SMA + SMA_wCurrMastVolRight) / 0xffff,	\
-	       dev.SMA + SMA_##b##Right);
-
-#define update_potm(d,s,ar)						\
-	writeb((dev.left_levels[d] >> 8) *				\
-	       readw(dev.SMA + SMA_wCurrMastVolLeft) / 0xffff,	\
-	       dev.SMA + SMA_##s##Left);				\
-	writeb((dev.right_levels[d] >> 8) *				\
-	       readw(dev.SMA + SMA_wCurrMastVolRight) / 0xffff,	\
-	       dev.SMA + SMA_##s##Right);				\
-	if (msnd_send_word(&dev, 0, 0, ar) == 0)			\
-		chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-
-#define update_pot(d,s,ar)				\
-	writeb(dev.left_levels[d] >> 8,		\
-	       dev.SMA + SMA_##s##Left);		\
-	writeb(dev.right_levels[d] >> 8,		\
-	       dev.SMA + SMA_##s##Right);		\
-	if (msnd_send_word(&dev, 0, 0, ar) == 0)	\
-		chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-
-static int mixer_set(int d, int value)
-{
-	int left = value & 0x000000ff;
-	int right = (value & 0x0000ff00) >> 8;
-	int bLeft, bRight;
-	int wLeft, wRight;
-	int updatemaster = 0;
-
-	if (d > 31)
-		return -EINVAL;
-
-	bLeft = left * 0xff / 100;
-	wLeft = left * 0xffff / 100;
-
-	bRight = right * 0xff / 100;
-	wRight = right * 0xffff / 100;
-
-	dev.left_levels[d] = wLeft;
-	dev.right_levels[d] = wRight;
-
-	switch (d) {
-		/* master volume unscaled controls */
-	case SOUND_MIXER_LINE:			/* line pot control */
-		/* scaled by IMIX in digital mix */
-		writeb(bLeft, dev.SMA + SMA_bInPotPosLeft);
-		writeb(bRight, dev.SMA + SMA_bInPotPosRight);
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_IN_SET_POTS) == 0)
-			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-		break;
-#ifndef MSND_CLASSIC
-	case SOUND_MIXER_MIC:			/* mic pot control */
-		/* scaled by IMIX in digital mix */
-		writeb(bLeft, dev.SMA + SMA_bMicPotPosLeft);
-		writeb(bRight, dev.SMA + SMA_bMicPotPosRight);
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_MIC_SET_POTS) == 0)
-			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-		break;
-#endif
-	case SOUND_MIXER_VOLUME:		/* master volume */
-		writew(wLeft, dev.SMA + SMA_wCurrMastVolLeft);
-		writew(wRight, dev.SMA + SMA_wCurrMastVolRight);
-		/* fall through */
-
-	case SOUND_MIXER_LINE1:			/* aux pot control */
-		/* scaled by master volume */
-		/* fall through */
-
-		/* digital controls */
-	case SOUND_MIXER_SYNTH:			/* synth vol (dsp mix) */
-	case SOUND_MIXER_PCM:			/* pcm vol (dsp mix) */
-	case SOUND_MIXER_IMIX:			/* input monitor (dsp mix) */
-		/* scaled by master volume */
-		updatemaster = 1;
-		break;
-
-	default:
-		return 0;
-	}
-
-	if (updatemaster) {
-		/* update master volume scaled controls */
-		update_volm(SOUND_MIXER_PCM, wCurrPlayVol);
-		update_volm(SOUND_MIXER_IMIX, wCurrInVol);
-#ifndef MSND_CLASSIC
-		update_volm(SOUND_MIXER_SYNTH, wCurrMHdrVol);
-#endif
-		update_potm(SOUND_MIXER_LINE1, bAuxPotPos, HDEXAR_AUX_SET_POTS);
-	}
-
-	return mixer_get(d);
-}
-
-static void mixer_setup(void)
-{
-	update_pot(SOUND_MIXER_LINE, bInPotPos, HDEXAR_IN_SET_POTS);
-	update_potm(SOUND_MIXER_LINE1, bAuxPotPos, HDEXAR_AUX_SET_POTS);
-	update_volm(SOUND_MIXER_PCM, wCurrPlayVol);
-	update_volm(SOUND_MIXER_IMIX, wCurrInVol);
-#ifndef MSND_CLASSIC
-	update_pot(SOUND_MIXER_MIC, bMicPotPos, HDEXAR_MIC_SET_POTS);
-	update_volm(SOUND_MIXER_SYNTH, wCurrMHdrVol);
-#endif
-}
-
-static unsigned long set_recsrc(unsigned long recsrc)
-{
-	if (dev.recsrc == recsrc)
-		return dev.recsrc;
-#ifdef HAVE_NORECSRC
-	else if (recsrc == 0)
-		dev.recsrc = 0;
-#endif
-	else
-		dev.recsrc ^= recsrc;
-
-#ifndef MSND_CLASSIC
-	if (dev.recsrc & SOUND_MASK_IMIX) {
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_ANA_IN) == 0)
-			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-	}
-	else if (dev.recsrc & SOUND_MASK_SYNTH) {
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_SYNTH_IN) == 0)
-			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-	}
-	else if ((dev.recsrc & SOUND_MASK_DIGITAL1) && test_bit(F_HAVEDIGITAL, &dev.flags)) {
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_DAT_IN) == 0)
-      			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-	}
-	else {
-#ifdef HAVE_NORECSRC
-		/* Select no input (?) */
-		dev.recsrc = 0;
-#else
-		dev.recsrc = SOUND_MASK_IMIX;
-		if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_ANA_IN) == 0)
-			chk_send_dsp_cmd(&dev, HDEX_AUX_REQ);
-#endif
-	}
-#endif /* MSND_CLASSIC */
-
-	return dev.recsrc;
-}
-
-static unsigned long force_recsrc(unsigned long recsrc)
-{
-	dev.recsrc = 0;
-	return set_recsrc(recsrc);
-}
-
-#define set_mixer_info()							\
-		memset(&info, 0, sizeof(info));					\
-		strlcpy(info.id, "MSNDMIXER", sizeof(info.id));			\
-		strlcpy(info.name, "MultiSound Mixer", sizeof(info.name));
-
-static int mixer_ioctl(unsigned int cmd, unsigned long arg)
-{
-	if (cmd == SOUND_MIXER_INFO) {
-		mixer_info info;
-		set_mixer_info();
-		info.modify_counter = dev.mixer_mod_count;
-		if (copy_to_user((void __user *)arg, &info, sizeof(info)))
-			return -EFAULT;
-		return 0;
-	} else if (cmd == SOUND_OLD_MIXER_INFO) {
-		_old_mixer_info info;
-		set_mixer_info();
-		if (copy_to_user((void __user *)arg, &info, sizeof(info)))
-			return -EFAULT;
-		return 0;
-	} else if (cmd == SOUND_MIXER_PRIVATE1) {
-		dev.nresets = 0;
-		dsp_full_reset();
-		return 0;
-	} else if (((cmd >> 8) & 0xff) == 'M') {
-		int val = 0;
-
-		if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
-			switch (cmd & 0xff) {
-			case SOUND_MIXER_RECSRC:
-				if (get_user(val, (int __user *)arg))
-					return -EFAULT;
-				val = set_recsrc(val);
-				break;
-
-			default:
-				if (get_user(val, (int __user *)arg))
-					return -EFAULT;
-				val = mixer_set(cmd & 0xff, val);
-				break;
-			}
-			++dev.mixer_mod_count;
-			return put_user(val, (int __user *)arg);
-		} else {
-			switch (cmd & 0xff) {
-			case SOUND_MIXER_RECSRC:
-				val = dev.recsrc;
-				break;
-
-			case SOUND_MIXER_DEVMASK:
-			case SOUND_MIXER_STEREODEVS:
-				val =   SOUND_MASK_PCM |
-					SOUND_MASK_LINE |
-					SOUND_MASK_IMIX |
-					SOUND_MASK_LINE1 |
-#ifndef MSND_CLASSIC
-					SOUND_MASK_MIC |
-					SOUND_MASK_SYNTH |
-#endif
-					SOUND_MASK_VOLUME;
-				break;
-				  
-			case SOUND_MIXER_RECMASK:
-#ifdef MSND_CLASSIC
-				val =   0;
-#else
-				val =   SOUND_MASK_IMIX |
-					SOUND_MASK_SYNTH;
-				if (test_bit(F_HAVEDIGITAL, &dev.flags))
-					val |= SOUND_MASK_DIGITAL1;
-#endif
-				break;
-				  
-			case SOUND_MIXER_CAPS:
-				val =   SOUND_CAP_EXCL_INPUT;
-				break;
-
-			default:
-				if ((val = mixer_get(cmd & 0xff)) < 0)
-					return -EINVAL;
-				break;
-			}
-		}
-
-		return put_user(val, (int __user *)arg); 
-	}
-
-	return -EINVAL;
-}
-
-static long dev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int minor = iminor(file_inode(file));
-	int ret;
-
-	if (cmd == OSS_GETVERSION) {
-		int sound_version = SOUND_VERSION;
-		return put_user(sound_version, (int __user *)arg);
-	}
-
-	ret = -EINVAL;
-
-	mutex_lock(&msnd_pinnacle_mutex);
-	if (minor == dev.dsp_minor)
-		ret = dsp_ioctl(file, cmd, arg);
-	else if (minor == dev.mixer_minor)
-		ret = mixer_ioctl(cmd, arg);
-	mutex_unlock(&msnd_pinnacle_mutex);
-
-	return ret;
-}
-
-static void dsp_write_flush(void)
-{
-	int timeout = get_play_delay_jiffies(dev.DAPF.len);
-
-	if (!(dev.mode & FMODE_WRITE) || !test_bit(F_WRITING, &dev.flags))
-		return;
-	set_bit(F_WRITEFLUSH, &dev.flags);
-	wait_event_interruptible_timeout(
-		dev.writeflush,
-		!test_bit(F_WRITEFLUSH, &dev.flags),
-		timeout);
-	clear_bit(F_WRITEFLUSH, &dev.flags);
-	if (!signal_pending(current)) {
-		__set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(get_play_delay_jiffies(DAP_BUFF_SIZE));
-	}
-	clear_bit(F_WRITING, &dev.flags);
-}
-
-static void dsp_halt(struct file *file)
-{
-	if ((file ? file->f_mode : dev.mode) & FMODE_READ) {
-		clear_bit(F_READING, &dev.flags);
-		chk_send_dsp_cmd(&dev, HDEX_RECORD_STOP);
-		msnd_disable_irq(&dev);
-		if (file) {
-			printk(KERN_DEBUG LOGNAME ": Stopping read for %p\n", file);
-			dev.mode &= ~FMODE_READ;
-		}
-		clear_bit(F_AUDIO_READ_INUSE, &dev.flags);
-	}
-	if ((file ? file->f_mode : dev.mode) & FMODE_WRITE) {
-		if (test_bit(F_WRITING, &dev.flags)) {
-			dsp_write_flush();
-			chk_send_dsp_cmd(&dev, HDEX_PLAY_STOP);
-		}
-		msnd_disable_irq(&dev);
-		if (file) {
-			printk(KERN_DEBUG LOGNAME ": Stopping write for %p\n", file);
-			dev.mode &= ~FMODE_WRITE;
-		}
-		clear_bit(F_AUDIO_WRITE_INUSE, &dev.flags);
-	}
-}
-
-static int dsp_release(struct file *file)
-{
-	dsp_halt(file);
-	return 0;
-}
-
-static int dsp_open(struct file *file)
-{
-	if ((file ? file->f_mode : dev.mode) & FMODE_WRITE) {
-		set_bit(F_AUDIO_WRITE_INUSE, &dev.flags);
-		clear_bit(F_WRITING, &dev.flags);
-		msnd_fifo_make_empty(&dev.DAPF);
-		reset_play_queue();
-		if (file) {
-			printk(KERN_DEBUG LOGNAME ": Starting write for %p\n", file);
-			dev.mode |= FMODE_WRITE;
-		}
-		msnd_enable_irq(&dev);
-	}
-	if ((file ? file->f_mode : dev.mode) & FMODE_READ) {
-		set_bit(F_AUDIO_READ_INUSE, &dev.flags);
-		clear_bit(F_READING, &dev.flags);
-		msnd_fifo_make_empty(&dev.DARF);
-		reset_record_queue();
-		if (file) {
-			printk(KERN_DEBUG LOGNAME ": Starting read for %p\n", file);
-			dev.mode |= FMODE_READ;
-		}
-		msnd_enable_irq(&dev);
-	}
-	return 0;
-}
-
-static void set_default_play_audio_parameters(void)
-{
-	dev.play_sample_size = DEFSAMPLESIZE;
-	dev.play_sample_rate = DEFSAMPLERATE;
-	dev.play_channels = DEFCHANNELS;
-}
-
-static void set_default_rec_audio_parameters(void)
-{
-	dev.rec_sample_size = DEFSAMPLESIZE;
-	dev.rec_sample_rate = DEFSAMPLERATE;
-	dev.rec_channels = DEFCHANNELS;
-}
-
-static void set_default_audio_parameters(void)
-{
-	set_default_play_audio_parameters();
-	set_default_rec_audio_parameters();
-}
-
-static int dev_open(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	int err = 0;
-
-	mutex_lock(&msnd_pinnacle_mutex);
-	if (minor == dev.dsp_minor) {
-		if ((file->f_mode & FMODE_WRITE &&
-		     test_bit(F_AUDIO_WRITE_INUSE, &dev.flags)) ||
-		    (file->f_mode & FMODE_READ &&
-		     test_bit(F_AUDIO_READ_INUSE, &dev.flags))) {
-			err = -EBUSY;
-			goto out;
-		}
-
-		if ((err = dsp_open(file)) >= 0) {
-			dev.nresets = 0;
-			if (file->f_mode & FMODE_WRITE) {
-				set_default_play_audio_parameters();
-				if (!test_bit(F_DISABLE_WRITE_NDELAY, &dev.flags))
-					dev.play_ndelay = (file->f_flags & O_NDELAY) ? 1 : 0;
-				else
-					dev.play_ndelay = 0;
-			}
-			if (file->f_mode & FMODE_READ) {
-				set_default_rec_audio_parameters();
-				dev.rec_ndelay = (file->f_flags & O_NDELAY) ? 1 : 0;
-			}
-		}
-	}
-	else if (minor == dev.mixer_minor) {
-		/* nothing */
-	} else
-		err = -EINVAL;
-out:
-	mutex_unlock(&msnd_pinnacle_mutex);
-	return err;
-}
-
-static int dev_release(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	int err = 0;
-
-	mutex_lock(&msnd_pinnacle_mutex);
-	if (minor == dev.dsp_minor)
-		err = dsp_release(file);
-	else if (minor == dev.mixer_minor) {
-		/* nothing */
-	} else
-		err = -EINVAL;
-	mutex_unlock(&msnd_pinnacle_mutex);
-	return err;
-}
-
-static __inline__ int pack_DARQ_to_DARF(register int bank)
-{
-	register int size, timeout = 3;
-	register WORD wTmp;
-	LPDAQD DAQD;
-
-	/* Increment the tail and check for queue wrap */
-	wTmp = readw(dev.DARQ + JQS_wTail) + PCTODSP_OFFSET(DAQDS__size);
-	if (wTmp > readw(dev.DARQ + JQS_wSize))
-		wTmp = 0;
-	while (wTmp == readw(dev.DARQ + JQS_wHead) && timeout--)
-		udelay(1);
-	writew(wTmp, dev.DARQ + JQS_wTail);
-
-	/* Get our digital audio queue struct */
-	DAQD = bank * DAQDS__size + dev.base + DARQ_DATA_BUFF;
-
-	/* Get length of data */
-	size = readw(DAQD + DAQDS_wSize);
-
-	/* Read data from the head (unprotected bank 1 access okay
-           since this is only called inside an interrupt) */
-	msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS);
-	msnd_fifo_write_io(
-		&dev.DARF,
-		dev.base + bank * DAR_BUFF_SIZE,
-		size);
-	msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
-
-	return 1;
-}
-
-static __inline__ int pack_DAPF_to_DAPQ(register int start)
-{
-	register WORD DAPQ_tail;
-	register int protect = start, nbanks = 0;
-	LPDAQD DAQD;
-
-	DAPQ_tail = readw(dev.DAPQ + JQS_wTail);
-	while (DAPQ_tail != readw(dev.DAPQ + JQS_wHead) || start) {
-		register int bank_num = DAPQ_tail / PCTODSP_OFFSET(DAQDS__size);
-		register int n;
-		unsigned long flags;
-
-		/* Write the data to the new tail */
-		if (protect) {
-			/* Critical section: protect fifo in non-interrupt */
-			spin_lock_irqsave(&dev.lock, flags);
-			n = msnd_fifo_read_io(
-				&dev.DAPF,
-				dev.base + bank_num * DAP_BUFF_SIZE,
-				DAP_BUFF_SIZE);
-			spin_unlock_irqrestore(&dev.lock, flags);
-		} else {
-			n = msnd_fifo_read_io(
-				&dev.DAPF,
-				dev.base + bank_num * DAP_BUFF_SIZE,
-				DAP_BUFF_SIZE);
-		}
-		if (!n)
-			break;
-
-		if (start)
-			start = 0;
-
-		/* Get our digital audio queue struct */
-		DAQD = bank_num * DAQDS__size + dev.base + DAPQ_DATA_BUFF;
-
-		/* Write size of this bank */
-		writew(n, DAQD + DAQDS_wSize);
-		++nbanks;
-
-		/* Then advance the tail */
-		DAPQ_tail = (++bank_num % 3) * PCTODSP_OFFSET(DAQDS__size);
-		writew(DAPQ_tail, dev.DAPQ + JQS_wTail);
-		/* Tell the DSP to play the bank */
-		msnd_send_dsp_cmd(&dev, HDEX_PLAY_START);
-	}
-	return nbanks;
-}
-
-static int dsp_read(char __user *buf, size_t len)
-{
-	int count = len;
-	char *page = (char *)__get_free_page(GFP_KERNEL);
-	int timeout = get_rec_delay_jiffies(DAR_BUFF_SIZE);
-
-	if (!page)
-		return -ENOMEM;
-
-	while (count > 0) {
-		int n, k;
-		unsigned long flags;
-
-		k = PAGE_SIZE;
-		if (k > count)
-			k = count;
-
-		/* Critical section: protect fifo in non-interrupt */
-		spin_lock_irqsave(&dev.lock, flags);
-		n = msnd_fifo_read(&dev.DARF, page, k);
-		spin_unlock_irqrestore(&dev.lock, flags);
-		if (copy_to_user(buf, page, n)) {
-			free_page((unsigned long)page);
-			return -EFAULT;
-		}
-		buf += n;
-		count -= n;
-
-		if (n == k && count)
-			continue;
-
-		if (!test_bit(F_READING, &dev.flags) && dev.mode & FMODE_READ) {
-			dev.last_recbank = -1;
-			if (chk_send_dsp_cmd(&dev, HDEX_RECORD_START) == 0)
-				set_bit(F_READING, &dev.flags);
-		}
-
-		if (dev.rec_ndelay) {
-			free_page((unsigned long)page);
-			return count == len ? -EAGAIN : len - count;
-		}
-
-		if (count > 0) {
-			set_bit(F_READBLOCK, &dev.flags);
-			if (wait_event_interruptible_timeout(
-					dev.readblock,
-					test_bit(F_READBLOCK, &dev.flags),
-					timeout) <= 0)
-				clear_bit(F_READING, &dev.flags);
-			if (signal_pending(current)) {
-				free_page((unsigned long)page);
-				return -EINTR;
-			}
-		}
-	}
-	free_page((unsigned long)page);
-	return len - count;
-}
-
-static int dsp_write(const char __user *buf, size_t len)
-{
-	int count = len;
-	char *page = (char *)__get_free_page(GFP_KERNEL);
-	int timeout = get_play_delay_jiffies(DAP_BUFF_SIZE);
-
-	if (!page)
-		return -ENOMEM;
-
-	while (count > 0) {
-		int n, k;
-		unsigned long flags;
-
-		k = PAGE_SIZE;
-		if (k > count)
-			k = count;
-
-		if (copy_from_user(page, buf, k)) {
-			free_page((unsigned long)page);
-			return -EFAULT;
-		}
-
-		/* Critical section: protect fifo in non-interrupt */
-		spin_lock_irqsave(&dev.lock, flags);
-		n = msnd_fifo_write(&dev.DAPF, page, k);
-		spin_unlock_irqrestore(&dev.lock, flags);
-		buf += n;
-		count -= n;
-
-		if (count && n == k)
-			continue;
-
-		if (!test_bit(F_WRITING, &dev.flags) && (dev.mode & FMODE_WRITE)) {
-			dev.last_playbank = -1;
-			if (pack_DAPF_to_DAPQ(1) > 0)
-				set_bit(F_WRITING, &dev.flags);
-		}
-
-		if (dev.play_ndelay) {
-			free_page((unsigned long)page);
-			return count == len ? -EAGAIN : len - count;
-		}
-
-		if (count > 0) {
-			set_bit(F_WRITEBLOCK, &dev.flags);
-			wait_event_interruptible_timeout(
-				dev.writeblock,
-				test_bit(F_WRITEBLOCK, &dev.flags),
-				timeout);
-			if (signal_pending(current)) {
-				free_page((unsigned long)page);
-				return -EINTR;
-			}
-		}
-	}
-
-	free_page((unsigned long)page);
-	return len - count;
-}
-
-static ssize_t dev_read(struct file *file, char __user *buf, size_t count, loff_t *off)
-{
-	int minor = iminor(file_inode(file));
-	if (minor == dev.dsp_minor)
-		return dsp_read(buf, count);
-	else
-		return -EINVAL;
-}
-
-static ssize_t dev_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
-{
-	int minor = iminor(file_inode(file));
-	if (minor == dev.dsp_minor)
-		return dsp_write(buf, count);
-	else
-		return -EINVAL;
-}
-
-static __inline__ void eval_dsp_msg(register WORD wMessage)
-{
-	switch (HIBYTE(wMessage)) {
-	case HIMT_PLAY_DONE:
-		if (dev.last_playbank == LOBYTE(wMessage) || !test_bit(F_WRITING, &dev.flags))
-			break;
-		dev.last_playbank = LOBYTE(wMessage);
-
-		if (pack_DAPF_to_DAPQ(0) <= 0) {
-			if (!test_bit(F_WRITEBLOCK, &dev.flags)) {
-				if (test_and_clear_bit(F_WRITEFLUSH, &dev.flags))
-					wake_up_interruptible(&dev.writeflush);
-			}
-			clear_bit(F_WRITING, &dev.flags);
-		}
-
-		if (test_and_clear_bit(F_WRITEBLOCK, &dev.flags))
-			wake_up_interruptible(&dev.writeblock);
-		break;
-
-	case HIMT_RECORD_DONE:
-		if (dev.last_recbank == LOBYTE(wMessage))
-			break;
-		dev.last_recbank = LOBYTE(wMessage);
-
-		pack_DARQ_to_DARF(dev.last_recbank);
-
-		if (test_and_clear_bit(F_READBLOCK, &dev.flags))
-			wake_up_interruptible(&dev.readblock);
-		break;
-
-	case HIMT_DSP:
-		switch (LOBYTE(wMessage)) {
-#ifndef MSND_CLASSIC
-		case HIDSP_PLAY_UNDER:
-#endif
-		case HIDSP_INT_PLAY_UNDER:
-/*			printk(KERN_DEBUG LOGNAME ": Play underflow\n"); */
-			clear_bit(F_WRITING, &dev.flags);
-			break;
-
-		case HIDSP_INT_RECORD_OVER:
-/*			printk(KERN_DEBUG LOGNAME ": Record overflow\n"); */
-			clear_bit(F_READING, &dev.flags);
-			break;
-
-		default:
-/*			printk(KERN_DEBUG LOGNAME ": DSP message %d 0x%02x\n",
-			LOBYTE(wMessage), LOBYTE(wMessage)); */
-			break;
-		}
-		break;
-
-        case HIMT_MIDI_IN_UCHAR:
-		if (dev.midi_in_interrupt)
-			(*dev.midi_in_interrupt)(&dev);
-		break;
-
-	default:
-/*		printk(KERN_DEBUG LOGNAME ": HIMT message %d 0x%02x\n", HIBYTE(wMessage), HIBYTE(wMessage)); */
-		break;
-	}
-}
-
-static irqreturn_t intr(int irq, void *dev_id)
-{
-	/* Send ack to DSP */
-	msnd_inb(dev.io + HP_RXL);
-
-	/* Evaluate queued DSP messages */
-	while (readw(dev.DSPQ + JQS_wTail) != readw(dev.DSPQ + JQS_wHead)) {
-		register WORD wTmp;
-
-		eval_dsp_msg(readw(dev.pwDSPQData + 2*readw(dev.DSPQ + JQS_wHead)));
-
-		if ((wTmp = readw(dev.DSPQ + JQS_wHead) + 1) > readw(dev.DSPQ + JQS_wSize))
-			writew(0, dev.DSPQ + JQS_wHead);
-		else
-			writew(wTmp, dev.DSPQ + JQS_wHead);
-	}
-	return IRQ_HANDLED;
-}
-
-static const struct file_operations dev_fileops = {
-	.owner		= THIS_MODULE,
-	.read		= dev_read,
-	.write		= dev_write,
-	.unlocked_ioctl	= dev_ioctl,
-	.open		= dev_open,
-	.release	= dev_release,
-	.llseek		= noop_llseek,
-};
-
-static int reset_dsp(void)
-{
-	int timeout = 100;
-
-	msnd_outb(HPDSPRESET_ON, dev.io + HP_DSPR);
-	mdelay(1);
-#ifndef MSND_CLASSIC
-	dev.info = msnd_inb(dev.io + HP_INFO);
-#endif
-	msnd_outb(HPDSPRESET_OFF, dev.io + HP_DSPR);
-	mdelay(1);
-	while (timeout-- > 0) {
-		if (msnd_inb(dev.io + HP_CVR) == HP_CVR_DEF)
-			return 0;
-		mdelay(1);
-	}
-	printk(KERN_ERR LOGNAME ": Cannot reset DSP\n");
-
-	return -EIO;
-}
-
-static int __init probe_multisound(void)
-{
-#ifndef MSND_CLASSIC
-	char *xv, *rev = NULL;
-	char *pin = "Pinnacle", *fiji = "Fiji";
-	char *pinfiji = "Pinnacle/Fiji";
-#endif
-
-	if (!request_region(dev.io, dev.numio, "probing")) {
-		printk(KERN_ERR LOGNAME ": I/O port conflict\n");
-		return -ENODEV;
-	}
-
-	if (reset_dsp() < 0) {
-		release_region(dev.io, dev.numio);
-		return -ENODEV;
-	}
-
-#ifdef MSND_CLASSIC
-	dev.name = "Classic/Tahiti/Monterey";
-	printk(KERN_INFO LOGNAME ": %s, "
-#else
-	switch (dev.info >> 4) {
-	case 0xf: xv = "<= 1.15"; break;
-	case 0x1: xv = "1.18/1.2"; break;
-	case 0x2: xv = "1.3"; break;
-	case 0x3: xv = "1.4"; break;
-	default: xv = "unknown"; break;
-	}
-
-	switch (dev.info & 0x7) {
-	case 0x0: rev = "I"; dev.name = pin; break;
-	case 0x1: rev = "F"; dev.name = pin; break;
-	case 0x2: rev = "G"; dev.name = pin; break;
-	case 0x3: rev = "H"; dev.name = pin; break;
-	case 0x4: rev = "E"; dev.name = fiji; break;
-	case 0x5: rev = "C"; dev.name = fiji; break;
-	case 0x6: rev = "D"; dev.name = fiji; break;
-	case 0x7:
-		rev = "A-B (Fiji) or A-E (Pinnacle)";
-		dev.name = pinfiji;
-		break;
-	}
-	printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, "
-#endif /* MSND_CLASSIC */
-	       "I/O 0x%x-0x%x, IRQ %d, memory mapped to %p-%p\n",
-	       dev.name,
-#ifndef MSND_CLASSIC
-	       rev, xv,
-#endif
-	       dev.io, dev.io + dev.numio - 1,
-	       dev.irq,
-	       dev.base, dev.base + 0x7fff);
-
-	release_region(dev.io, dev.numio);
-	return 0;
-}
-
-static int init_sma(void)
-{
-	static int initted;
-	WORD mastVolLeft, mastVolRight;
-	unsigned long flags;
-
-#ifdef MSND_CLASSIC
-	msnd_outb(dev.memid, dev.io + HP_MEMM);
-#endif
-	msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
-	if (initted) {
-		mastVolLeft = readw(dev.SMA + SMA_wCurrMastVolLeft);
-		mastVolRight = readw(dev.SMA + SMA_wCurrMastVolRight);
-	} else
-		mastVolLeft = mastVolRight = 0;
-	memset_io(dev.base, 0, 0x8000);
-
-	/* Critical section: bank 1 access */
-	spin_lock_irqsave(&dev.lock, flags);
-	msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS);
-	memset_io(dev.base, 0, 0x8000);
-	msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
-	spin_unlock_irqrestore(&dev.lock, flags);
-
-	dev.pwDSPQData = (dev.base + DSPQ_DATA_BUFF);
-	dev.pwMODQData = (dev.base + MODQ_DATA_BUFF);
-	dev.pwMIDQData = (dev.base + MIDQ_DATA_BUFF);
-
-	/* Motorola 56k shared memory base */
-	dev.SMA = dev.base + SMA_STRUCT_START;
-
-	/* Digital audio play queue */
-	dev.DAPQ = dev.base + DAPQ_OFFSET;
-	msnd_init_queue(dev.DAPQ, DAPQ_DATA_BUFF, DAPQ_BUFF_SIZE);
-
-	/* Digital audio record queue */
-	dev.DARQ = dev.base + DARQ_OFFSET;
-	msnd_init_queue(dev.DARQ, DARQ_DATA_BUFF, DARQ_BUFF_SIZE);
-
-	/* MIDI out queue */
-	dev.MODQ = dev.base + MODQ_OFFSET;
-	msnd_init_queue(dev.MODQ, MODQ_DATA_BUFF, MODQ_BUFF_SIZE);
-
-	/* MIDI in queue */
-	dev.MIDQ = dev.base + MIDQ_OFFSET;
-	msnd_init_queue(dev.MIDQ, MIDQ_DATA_BUFF, MIDQ_BUFF_SIZE);
-
-	/* DSP -> host message queue */
-	dev.DSPQ = dev.base + DSPQ_OFFSET;
-	msnd_init_queue(dev.DSPQ, DSPQ_DATA_BUFF, DSPQ_BUFF_SIZE);
-
-	/* Setup some DSP values */
-#ifndef MSND_CLASSIC
-	writew(1, dev.SMA + SMA_wCurrPlayFormat);
-	writew(dev.play_sample_size, dev.SMA + SMA_wCurrPlaySampleSize);
-	writew(dev.play_channels, dev.SMA + SMA_wCurrPlayChannels);
-	writew(dev.play_sample_rate, dev.SMA + SMA_wCurrPlaySampleRate);
-#endif
-	writew(dev.play_sample_rate, dev.SMA + SMA_wCalFreqAtoD);
-	writew(mastVolLeft, dev.SMA + SMA_wCurrMastVolLeft);
-	writew(mastVolRight, dev.SMA + SMA_wCurrMastVolRight);
-#ifndef MSND_CLASSIC
-	writel(0x00010000, dev.SMA + SMA_dwCurrPlayPitch);
-	writel(0x00000001, dev.SMA + SMA_dwCurrPlayRate);
-#endif
-	writew(0x303, dev.SMA + SMA_wCurrInputTagBits);
-
-	initted = 1;
-
-	return 0;
-}
-
-static int __init calibrate_adc(WORD srate)
-{
-	writew(srate, dev.SMA + SMA_wCalFreqAtoD);
-	if (dev.calibrate_signal == 0)
-		writew(readw(dev.SMA + SMA_wCurrHostStatusFlags)
-		       | 0x0001, dev.SMA + SMA_wCurrHostStatusFlags);
-	else
-		writew(readw(dev.SMA + SMA_wCurrHostStatusFlags)
-		       & ~0x0001, dev.SMA + SMA_wCurrHostStatusFlags);
-	if (msnd_send_word(&dev, 0, 0, HDEXAR_CAL_A_TO_D) == 0 &&
-	    chk_send_dsp_cmd(&dev, HDEX_AUX_REQ) == 0) {
-		schedule_timeout_interruptible(HZ / 3);
-		return 0;
-	}
-	printk(KERN_WARNING LOGNAME ": ADC calibration failed\n");
-
-	return -EIO;
-}
-
-static int upload_dsp_code(void)
-{
-	int ret = 0;
-
-	msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
-#ifndef HAVE_DSPCODEH
-	INITCODESIZE = mod_firmware_load(INITCODEFILE, &INITCODE);
-	if (!INITCODE) {
-		printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE);
-		return -EBUSY;
-	}
-
-	PERMCODESIZE = mod_firmware_load(PERMCODEFILE, &PERMCODE);
-	if (!PERMCODE) {
-		printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE);
-		vfree(INITCODE);
-		return -EBUSY;
-	}
-#endif
-	memcpy_toio(dev.base, PERMCODE, PERMCODESIZE);
-	if (msnd_upload_host(&dev, INITCODE, INITCODESIZE) < 0) {
-		printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
-		ret = -ENODEV;
-		goto out;
-	}
-#ifdef HAVE_DSPCODEH
-	printk(KERN_INFO LOGNAME ": DSP firmware uploaded (resident)\n");
-#else
-	printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
-#endif
-
-out:
-#ifndef HAVE_DSPCODEH
-	vfree(INITCODE);
-	vfree(PERMCODE);
-#endif
-
-	return ret;
-}
-
-#ifdef MSND_CLASSIC
-static void reset_proteus(void)
-{
-	msnd_outb(HPPRORESET_ON, dev.io + HP_PROR);
-	mdelay(TIME_PRO_RESET);
-	msnd_outb(HPPRORESET_OFF, dev.io + HP_PROR);
-	mdelay(TIME_PRO_RESET_DONE);
-}
-#endif
-
-static int initialize(void)
-{
-	int err, timeout;
-
-#ifdef MSND_CLASSIC
-	msnd_outb(HPWAITSTATE_0, dev.io + HP_WAIT);
-	msnd_outb(HPBITMODE_16, dev.io + HP_BITM);
-
-	reset_proteus();
-#endif
-	if ((err = init_sma()) < 0) {
-		printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n");
-		return err;
-	}
-
-	if ((err = reset_dsp()) < 0)
-		return err;
-
-	if ((err = upload_dsp_code()) < 0) {
-		printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n");
-		return err;
-	}
-
-	timeout = 200;
-	while (readw(dev.base)) {
-		mdelay(1);
-		if (!timeout--) {
-			printk(KERN_DEBUG LOGNAME ": DSP reset timeout\n");
-			return -EIO;
-		}
-	}
-
-	mixer_setup();
-
-	return 0;
-}
-
-static int dsp_full_reset(void)
-{
-	int rv;
-
-	if (test_bit(F_RESETTING, &dev.flags) || ++dev.nresets > 10)
-		return 0;
-
-	set_bit(F_RESETTING, &dev.flags);
-	printk(KERN_INFO LOGNAME ": DSP reset\n");
-	dsp_halt(NULL);			/* Unconditionally halt */
-	if ((rv = initialize()))
-		printk(KERN_WARNING LOGNAME ": DSP reset failed\n");
-	force_recsrc(dev.recsrc);
-	dsp_open(NULL);
-	clear_bit(F_RESETTING, &dev.flags);
-
-	return rv;
-}
-
-static int __init attach_multisound(void)
-{
-	int err;
-
-	if ((err = request_irq(dev.irq, intr, 0, dev.name, &dev)) < 0) {
-		printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", dev.irq);
-		return err;
-	}
-	if (request_region(dev.io, dev.numio, dev.name) == NULL) {
-		free_irq(dev.irq, &dev);
-		return -EBUSY;
-	}
-
-	err = dsp_full_reset();
-	if (err < 0) {
-		release_region(dev.io, dev.numio);
-		free_irq(dev.irq, &dev);
-		return err;
-	}
-
-	if ((err = msnd_register(&dev)) < 0) {
-		printk(KERN_ERR LOGNAME ": Unable to register MultiSound\n");
-		release_region(dev.io, dev.numio);
-		free_irq(dev.irq, &dev);
-		return err;
-	}
-
-	if ((dev.dsp_minor = register_sound_dsp(&dev_fileops, -1)) < 0) {
-		printk(KERN_ERR LOGNAME ": Unable to register DSP operations\n");
-		msnd_unregister(&dev);
-		release_region(dev.io, dev.numio);
-		free_irq(dev.irq, &dev);
-		return dev.dsp_minor;
-	}
-
-	if ((dev.mixer_minor = register_sound_mixer(&dev_fileops, -1)) < 0) {
-		printk(KERN_ERR LOGNAME ": Unable to register mixer operations\n");
-		unregister_sound_mixer(dev.mixer_minor);
-		msnd_unregister(&dev);
-		release_region(dev.io, dev.numio);
-		free_irq(dev.irq, &dev);
-		return dev.mixer_minor;
-	}
-
-	dev.ext_midi_dev = dev.hdr_midi_dev = -1;
-
-	disable_irq(dev.irq);
-	calibrate_adc(dev.play_sample_rate);
-#ifndef MSND_CLASSIC
-	force_recsrc(SOUND_MASK_IMIX);
-#endif
-
-	return 0;
-}
-
-static void __exit unload_multisound(void)
-{
-	release_region(dev.io, dev.numio);
-	free_irq(dev.irq, &dev);
-	unregister_sound_mixer(dev.mixer_minor);
-	unregister_sound_dsp(dev.dsp_minor);
-	msnd_unregister(&dev);
-}
-
-#ifndef MSND_CLASSIC
-
-/* Pinnacle/Fiji Logical Device Configuration */
-
-static int __init msnd_write_cfg(int cfg, int reg, int value)
-{
-	msnd_outb(reg, cfg);
-	msnd_outb(value, cfg + 1);
-	if (value != msnd_inb(cfg + 1)) {
-		printk(KERN_ERR LOGNAME ": msnd_write_cfg: I/O error\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static int __init msnd_write_cfg_io0(int cfg, int num, WORD io)
-{
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io)))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io)))
-		return -EIO;
-	return 0;
-}
-
-static int __init msnd_write_cfg_io1(int cfg, int num, WORD io)
-{
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io)))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io)))
-		return -EIO;
-	return 0;
-}
-
-static int __init msnd_write_cfg_irq(int cfg, int num, WORD irq)
-{
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq)))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE))
-		return -EIO;
-	return 0;
-}
-
-static int __init msnd_write_cfg_mem(int cfg, int num, int mem)
-{
-	WORD wmem;
-
-	mem >>= 8;
-	mem &= 0xfff;
-	wmem = (WORD)mem;
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem)))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem)))
-		return -EIO;
-	if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT)))
-		return -EIO;
-	return 0;
-}
-
-static int __init msnd_activate_logical(int cfg, int num)
-{
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE))
-		return -EIO;
-	return 0;
-}
-
-static int __init msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem)
-{
-	if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))
-		return -EIO;
-	if (msnd_write_cfg_io0(cfg, num, io0))
-		return -EIO;
-	if (msnd_write_cfg_io1(cfg, num, io1))
-		return -EIO;
-	if (msnd_write_cfg_irq(cfg, num, irq))
-		return -EIO;
-	if (msnd_write_cfg_mem(cfg, num, mem))
-		return -EIO;
-	if (msnd_activate_logical(cfg, num))
-		return -EIO;
-	return 0;
-}
-
-typedef struct msnd_pinnacle_cfg_device {
-	WORD io0, io1, irq;
-	int mem;
-} msnd_pinnacle_cfg_t[4];
-
-static int __init msnd_pinnacle_cfg_devices(int cfg, int reset, msnd_pinnacle_cfg_t device)
-{
-	int i;
-
-	/* Reset devices if told to */
-	if (reset) {
-		printk(KERN_INFO LOGNAME ": Resetting all devices\n");
-		for (i = 0; i < 4; ++i)
-			if (msnd_write_cfg_logical(cfg, i, 0, 0, 0, 0))
-				return -EIO;
-	}
-
-	/* Configure specified devices */
-	for (i = 0; i < 4; ++i) {
-
-		switch (i) {
-		case 0:		/* DSP */
-			if (!(device[i].io0 && device[i].irq && device[i].mem))
-				continue;
-			break;
-		case 1:		/* MPU */
-			if (!(device[i].io0 && device[i].irq))
-				continue;
-			printk(KERN_INFO LOGNAME
-			       ": Configuring MPU to I/O 0x%x IRQ %d\n",
-			       device[i].io0, device[i].irq);
-			break;
-		case 2:		/* IDE */
-			if (!(device[i].io0 && device[i].io1 && device[i].irq))
-				continue;
-			printk(KERN_INFO LOGNAME
-			       ": Configuring IDE to I/O 0x%x, 0x%x IRQ %d\n",
-			       device[i].io0, device[i].io1, device[i].irq);
-			break;
-		case 3:		/* Joystick */
-			if (!(device[i].io0))
-				continue;
-			printk(KERN_INFO LOGNAME
-			       ": Configuring joystick to I/O 0x%x\n",
-			       device[i].io0);
-			break;
-		}
-
-		/* Configure the device */
-		if (msnd_write_cfg_logical(cfg, i, device[i].io0, device[i].io1, device[i].irq, device[i].mem))
-			return -EIO;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef MODULE
-MODULE_AUTHOR				("Andrew Veliath <andrewtv@usa.net>");
-MODULE_DESCRIPTION			("Turtle Beach " LONGNAME " Linux Driver");
-MODULE_LICENSE("GPL");
-
-static int io __initdata =		-1;
-static int irq __initdata =		-1;
-static int mem __initdata =		-1;
-static int write_ndelay __initdata =	-1;
-
-#ifndef MSND_CLASSIC
-/* Pinnacle/Fiji non-PnP Config Port */
-static int cfg __initdata =		-1;
-
-/* Extra Peripheral Configuration */
-static int reset __initdata = 0;
-static int mpu_io __initdata = 0;
-static int mpu_irq __initdata = 0;
-static int ide_io0 __initdata = 0;
-static int ide_io1 __initdata = 0;
-static int ide_irq __initdata = 0;
-static int joystick_io __initdata = 0;
-
-/* If we have the digital daugherboard... */
-static bool digital __initdata = false;
-#endif
-
-static int fifosize __initdata =	DEFFIFOSIZE;
-static int calibrate_signal __initdata = 0;
-
-#else /* not a module */
-
-static int write_ndelay __initdata =	-1;
-
-#ifdef MSND_CLASSIC
-static int io __initdata =		CONFIG_MSNDCLAS_IO;
-static int irq __initdata =		CONFIG_MSNDCLAS_IRQ;
-static int mem __initdata =		CONFIG_MSNDCLAS_MEM;
-#else /* Pinnacle/Fiji */
-
-static int io __initdata =		CONFIG_MSNDPIN_IO;
-static int irq __initdata =		CONFIG_MSNDPIN_IRQ;
-static int mem __initdata =		CONFIG_MSNDPIN_MEM;
-
-/* Pinnacle/Fiji non-PnP Config Port */
-#ifdef CONFIG_MSNDPIN_NONPNP
-#  ifndef CONFIG_MSNDPIN_CFG
-#    define CONFIG_MSNDPIN_CFG		0x250
-#  endif
-#else
-#  ifdef CONFIG_MSNDPIN_CFG
-#    undef CONFIG_MSNDPIN_CFG
-#  endif
-#  define CONFIG_MSNDPIN_CFG		-1
-#endif
-static int cfg __initdata =		CONFIG_MSNDPIN_CFG;
-/* If not a module, we don't need to bother with reset=1 */
-static int reset;
-
-/* Extra Peripheral Configuration (Default: Disable) */
-#ifndef CONFIG_MSNDPIN_MPU_IO
-#  define CONFIG_MSNDPIN_MPU_IO		0
-#endif
-static int mpu_io __initdata =		CONFIG_MSNDPIN_MPU_IO;
-
-#ifndef CONFIG_MSNDPIN_MPU_IRQ
-#  define CONFIG_MSNDPIN_MPU_IRQ	0
-#endif
-static int mpu_irq __initdata =		CONFIG_MSNDPIN_MPU_IRQ;
-
-#ifndef CONFIG_MSNDPIN_IDE_IO0
-#  define CONFIG_MSNDPIN_IDE_IO0	0
-#endif
-static int ide_io0 __initdata =		CONFIG_MSNDPIN_IDE_IO0;
-
-#ifndef CONFIG_MSNDPIN_IDE_IO1
-#  define CONFIG_MSNDPIN_IDE_IO1	0
-#endif
-static int ide_io1 __initdata =		CONFIG_MSNDPIN_IDE_IO1;
-
-#ifndef CONFIG_MSNDPIN_IDE_IRQ
-#  define CONFIG_MSNDPIN_IDE_IRQ	0
-#endif
-static int ide_irq __initdata =		CONFIG_MSNDPIN_IDE_IRQ;
-
-#ifndef CONFIG_MSNDPIN_JOYSTICK_IO
-#  define CONFIG_MSNDPIN_JOYSTICK_IO	0
-#endif
-static int joystick_io __initdata =	CONFIG_MSNDPIN_JOYSTICK_IO;
-
-/* Have SPDIF (Digital) Daughterboard */
-#ifndef CONFIG_MSNDPIN_DIGITAL
-#  define CONFIG_MSNDPIN_DIGITAL	0
-#endif
-static bool digital __initdata =	CONFIG_MSNDPIN_DIGITAL;
-
-#endif /* MSND_CLASSIC */
-
-#ifndef CONFIG_MSND_FIFOSIZE
-#  define CONFIG_MSND_FIFOSIZE		DEFFIFOSIZE
-#endif
-static int fifosize __initdata =	CONFIG_MSND_FIFOSIZE;
-
-#ifndef CONFIG_MSND_CALSIGNAL
-#  define CONFIG_MSND_CALSIGNAL		0
-#endif
-static int
-calibrate_signal __initdata =		CONFIG_MSND_CALSIGNAL;
-#endif /* MODULE */
-
-module_param_hw				(io, int, ioport, 0);
-module_param_hw				(irq, int, irq, 0);
-module_param_hw				(mem, int, iomem, 0);
-module_param				(write_ndelay, int, 0);
-module_param				(fifosize, int, 0);
-module_param				(calibrate_signal, int, 0);
-#ifndef MSND_CLASSIC
-module_param				(digital, bool, 0);
-module_param_hw				(cfg, int, ioport, 0);
-module_param				(reset, int, 0);
-module_param_hw				(mpu_io, int, ioport, 0);
-module_param_hw				(mpu_irq, int, irq, 0);
-module_param_hw				(ide_io0, int, ioport, 0);
-module_param_hw				(ide_io1, int, ioport, 0);
-module_param_hw				(ide_irq, int, irq, 0);
-module_param_hw				(joystick_io, int, ioport, 0);
-#endif
-
-static int __init msnd_init(void)
-{
-	int err;
-#ifndef MSND_CLASSIC
-	static msnd_pinnacle_cfg_t pinnacle_devs;
-#endif /* MSND_CLASSIC */
-
-	printk(KERN_INFO LOGNAME ": Turtle Beach " LONGNAME " Linux Driver Version "
-	       VERSION ", Copyright (C) 1998 Andrew Veliath\n");
-
-	if (io == -1 || irq == -1 || mem == -1)
-		printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n");
-
-#ifdef MSND_CLASSIC
-	if (io == -1 ||
-	    !(io == 0x290 ||
-	      io == 0x260 ||
-	      io == 0x250 ||
-	      io == 0x240 ||
-	      io == 0x230 ||
-	      io == 0x220 ||
-	      io == 0x210 ||
-	      io == 0x3e0)) {
-		printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set to 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x290, or 0x3E0\n");
-		return -EINVAL;
-	}
-#else
-	if (io == -1 ||
-		io < 0x100 ||
-		io > 0x3e0 ||
-		(io % 0x10) != 0) {
-			printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must within the range 0x100 to 0x3E0 and must be evenly divisible by 0x10\n");
-			return -EINVAL;
-	}
-#endif /* MSND_CLASSIC */
-
-	if (irq == -1 ||
-	    !(irq == 5 ||
-	      irq == 7 ||
-	      irq == 9 ||
-	      irq == 10 ||
-	      irq == 11 ||
-	      irq == 12)) {
-		printk(KERN_ERR LOGNAME ": \"irq\" - must be set to 5, 7, 9, 10, 11 or 12\n");
-		return -EINVAL;
-	}
-
-	if (mem == -1 ||
-	    !(mem == 0xb0000 ||
-	      mem == 0xc8000 ||
-	      mem == 0xd0000 ||
-	      mem == 0xd8000 ||
-	      mem == 0xe0000 ||
-	      mem == 0xe8000)) {
-		printk(KERN_ERR LOGNAME ": \"mem\" - must be set to "
-		       "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n");
-		return -EINVAL;
-	}
-
-#ifdef MSND_CLASSIC
-	switch (irq) {
-	case 5: dev.irqid = HPIRQ_5; break;
-	case 7: dev.irqid = HPIRQ_7; break;
-	case 9: dev.irqid = HPIRQ_9; break;
-	case 10: dev.irqid = HPIRQ_10; break;
-	case 11: dev.irqid = HPIRQ_11; break;
-	case 12: dev.irqid = HPIRQ_12; break;
-	}
-
-	switch (mem) {
-	case 0xb0000: dev.memid = HPMEM_B000; break;
-	case 0xc8000: dev.memid = HPMEM_C800; break;
-	case 0xd0000: dev.memid = HPMEM_D000; break;
-	case 0xd8000: dev.memid = HPMEM_D800; break;
-	case 0xe0000: dev.memid = HPMEM_E000; break;
-	case 0xe8000: dev.memid = HPMEM_E800; break;
-	}
-#else
-	if (cfg == -1) {
-		printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
-	} else if (cfg != 0x250 && cfg != 0x260 && cfg != 0x270) {
-		printk(KERN_INFO LOGNAME ": Config port must be 0x250, 0x260 or 0x270 (or unspecified for PnP mode)\n");
-		return -EINVAL;
-	} else {
-		printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%x\n", cfg);
-
-		/* DSP */
-		pinnacle_devs[0].io0 = io;
-		pinnacle_devs[0].irq = irq;
-		pinnacle_devs[0].mem = mem;
-
-		/* The following are Pinnacle specific */
-
-		/* MPU */
-		pinnacle_devs[1].io0 = mpu_io;
-		pinnacle_devs[1].irq = mpu_irq;
-
-		/* IDE */
-		pinnacle_devs[2].io0 = ide_io0;
-		pinnacle_devs[2].io1 = ide_io1;
-		pinnacle_devs[2].irq = ide_irq;
-
-		/* Joystick */
-		pinnacle_devs[3].io0 = joystick_io;
-
-		if (!request_region(cfg, 2, "Pinnacle/Fiji Config")) {
-			printk(KERN_ERR LOGNAME ": Config port 0x%x conflict\n", cfg);
-			return -EIO;
-		}
-
-		if (msnd_pinnacle_cfg_devices(cfg, reset, pinnacle_devs)) {
-			printk(KERN_ERR LOGNAME ": Device configuration error\n");
-			release_region(cfg, 2);
-			return -EIO;
-		}
-		release_region(cfg, 2);
-	}
-#endif /* MSND_CLASSIC */
-
-	if (fifosize < 16)
-		fifosize = 16;
-
-	if (fifosize > 1024)
-		fifosize = 1024;
-
-	set_default_audio_parameters();
-#ifdef MSND_CLASSIC
-	dev.type = msndClassic;
-#else
-	dev.type = msndPinnacle;
-#endif
-	dev.io = io;
-	dev.numio = DSP_NUMIO;
-	dev.irq = irq;
-	dev.base = ioremap(mem, 0x8000);
-	dev.fifosize = fifosize * 1024;
-	dev.calibrate_signal = calibrate_signal ? 1 : 0;
-	dev.recsrc = 0;
-	dev.dspq_data_buff = DSPQ_DATA_BUFF;
-	dev.dspq_buff_size = DSPQ_BUFF_SIZE;
-	if (write_ndelay == -1)
-		write_ndelay = CONFIG_MSND_WRITE_NDELAY;
-	if (write_ndelay)
-		clear_bit(F_DISABLE_WRITE_NDELAY, &dev.flags);
-	else
-		set_bit(F_DISABLE_WRITE_NDELAY, &dev.flags);
-#ifndef MSND_CLASSIC
-	if (digital)
-		set_bit(F_HAVEDIGITAL, &dev.flags);
-#endif
-	init_waitqueue_head(&dev.writeblock);
-	init_waitqueue_head(&dev.readblock);
-	init_waitqueue_head(&dev.writeflush);
-	msnd_fifo_init(&dev.DAPF);
-	msnd_fifo_init(&dev.DARF);
-	spin_lock_init(&dev.lock);
-	printk(KERN_INFO LOGNAME ": %u byte audio FIFOs (x2)\n", dev.fifosize);
-	if ((err = msnd_fifo_alloc(&dev.DAPF, dev.fifosize)) < 0) {
-		printk(KERN_ERR LOGNAME ": Couldn't allocate write FIFO\n");
-		return err;
-	}
-
-	if ((err = msnd_fifo_alloc(&dev.DARF, dev.fifosize)) < 0) {
-		printk(KERN_ERR LOGNAME ": Couldn't allocate read FIFO\n");
-		msnd_fifo_free(&dev.DAPF);
-		return err;
-	}
-
-	if ((err = probe_multisound()) < 0) {
-		printk(KERN_ERR LOGNAME ": Probe failed\n");
-		msnd_fifo_free(&dev.DAPF);
-		msnd_fifo_free(&dev.DARF);
-		return err;
-	}
-
-	if ((err = attach_multisound()) < 0) {
-		printk(KERN_ERR LOGNAME ": Attach failed\n");
-		msnd_fifo_free(&dev.DAPF);
-		msnd_fifo_free(&dev.DARF);
-		return err;
-	}
-
-	return 0;
-}
-
-static void __exit msdn_cleanup(void)
-{
-	unload_multisound();
-	msnd_fifo_free(&dev.DAPF);
-	msnd_fifo_free(&dev.DARF);
-}
-
-module_init(msnd_init);
-module_exit(msdn_cleanup);
diff --git a/sound/oss/msnd_pinnacle.h b/sound/oss/msnd_pinnacle.h
deleted file mode 100644
index c18d66cbbe3f..000000000000
--- a/sound/oss/msnd_pinnacle.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*********************************************************************
- *
- * msnd_pinnacle.h
- *
- * Turtle Beach MultiSound Sound Card Driver for Linux
- *
- * Some parts of this header file were derived from the Turtle Beach
- * MultiSound Driver Development Kit.
- *
- * Copyright (C) 1998 Andrew Veliath
- * Copyright (C) 1993 Turtle Beach Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- ********************************************************************/
-#ifndef __MSND_PINNACLE_H
-#define __MSND_PINNACLE_H
-
-
-#define DSP_NUMIO				0x08
-
-#define IREG_LOGDEVICE				0x07
-#define IREG_ACTIVATE				0x30
-#define LD_ACTIVATE				0x01
-#define LD_DISACTIVATE				0x00
-#define IREG_EECONTROL				0x3F
-#define IREG_MEMBASEHI				0x40
-#define IREG_MEMBASELO				0x41
-#define IREG_MEMCONTROL				0x42
-#define IREG_MEMRANGEHI				0x43
-#define IREG_MEMRANGELO				0x44
-#define MEMTYPE_8BIT				0x00
-#define MEMTYPE_16BIT				0x02
-#define MEMTYPE_RANGE				0x00
-#define MEMTYPE_HIADDR				0x01
-#define IREG_IO0_BASEHI				0x60
-#define IREG_IO0_BASELO				0x61
-#define IREG_IO1_BASEHI				0x62
-#define IREG_IO1_BASELO				0x63
-#define IREG_IRQ_NUMBER				0x70
-#define IREG_IRQ_TYPE				0x71
-#define IRQTYPE_HIGH				0x02
-#define IRQTYPE_LOW				0x00
-#define IRQTYPE_LEVEL				0x01
-#define IRQTYPE_EDGE				0x00
-
-#define	HP_DSPR					0x04
-#define	HP_BLKS					0x04
-
-#define HPDSPRESET_OFF				2
-#define HPDSPRESET_ON				0
-
-#define HPBLKSEL_0				2
-#define HPBLKSEL_1				3
-
-#define	HIMT_DAT_OFF				0x03
-
-#define	HIDSP_PLAY_UNDER			0x00
-#define	HIDSP_INT_PLAY_UNDER			0x01
-#define	HIDSP_SSI_TX_UNDER  			0x02
-#define HIDSP_RECQ_OVERFLOW			0x08
-#define HIDSP_INT_RECORD_OVER			0x09
-#define HIDSP_SSI_RX_OVERFLOW			0x0a
-
-#define	HIDSP_MIDI_IN_OVER			0x10
-
-#define	HIDSP_MIDI_FRAME_ERR			0x11
-#define	HIDSP_MIDI_PARITY_ERR			0x12
-#define	HIDSP_MIDI_OVERRUN_ERR			0x13
-
-#define HIDSP_INPUT_CLIPPING			0x20
-#define	HIDSP_MIX_CLIPPING			0x30
-#define HIDSP_DAT_IN_OFF			0x21
-
-#define	HDEXAR_SET_ANA_IN			0
-#define	HDEXAR_CLEAR_PEAKS			1
-#define	HDEXAR_IN_SET_POTS			2
-#define	HDEXAR_AUX_SET_POTS			3
-#define	HDEXAR_CAL_A_TO_D			4
-#define	HDEXAR_RD_EXT_DSP_BITS			5
-
-#define	HDEXAR_SET_SYNTH_IN			4
-#define	HDEXAR_READ_DAT_IN			5
-#define	HDEXAR_MIC_SET_POTS			6
-#define	HDEXAR_SET_DAT_IN			7
-
-#define HDEXAR_SET_SYNTH_48			8
-#define HDEXAR_SET_SYNTH_44			9
-
-#define TIME_PRO_RESET_DONE			0x028A
-#define TIME_PRO_SYSEX				0x001E
-#define TIME_PRO_RESET				0x0032
-
-#define AGND					0x01
-#define SIGNAL					0x02
-
-#define EXT_DSP_BIT_DCAL			0x0001
-#define EXT_DSP_BIT_MIDI_CON			0x0002
-
-#define BUFFSIZE				0x8000
-#define HOSTQ_SIZE				0x40
-
-#define SRAM_CNTL_START				0x7F00
-#define SMA_STRUCT_START			0x7F40
-
-#define DAP_BUFF_SIZE				0x2400
-#define DAR_BUFF_SIZE				0x2000
-
-#define DAPQ_STRUCT_SIZE			0x10
-#define DARQ_STRUCT_SIZE			0x10
-#define DAPQ_BUFF_SIZE				(3 * 0x10)
-#define DARQ_BUFF_SIZE				(3 * 0x10)
-#define MODQ_BUFF_SIZE				0x400
-#define MIDQ_BUFF_SIZE				0x800
-#define DSPQ_BUFF_SIZE				0x5A0
-
-#define DAPQ_DATA_BUFF				0x6C00
-#define DARQ_DATA_BUFF				0x6C30
-#define MODQ_DATA_BUFF				0x6C60
-#define MIDQ_DATA_BUFF				0x7060
-#define DSPQ_DATA_BUFF				0x7860
-
-#define DAPQ_OFFSET				SRAM_CNTL_START
-#define DARQ_OFFSET				(SRAM_CNTL_START + 0x08)
-#define MODQ_OFFSET				(SRAM_CNTL_START + 0x10)
-#define MIDQ_OFFSET				(SRAM_CNTL_START + 0x18)
-#define DSPQ_OFFSET				(SRAM_CNTL_START + 0x20)
-
-#define MOP_WAVEHDR				0
-#define MOP_EXTOUT				1
-#define MOP_HWINIT				0xfe
-#define MOP_NONE				0xff
-#define MOP_MAX					1
-
-#define MIP_EXTIN				0
-#define MIP_WAVEHDR				1
-#define MIP_HWINIT				0xfe
-#define MIP_MAX					1
-
-/* Pinnacle/Fiji SMA Common Data */
-#define SMA_wCurrPlayBytes			0x0000
-#define SMA_wCurrRecordBytes			0x0002
-#define SMA_wCurrPlayVolLeft			0x0004
-#define SMA_wCurrPlayVolRight			0x0006
-#define SMA_wCurrInVolLeft			0x0008
-#define SMA_wCurrInVolRight			0x000a
-#define SMA_wCurrMHdrVolLeft			0x000c
-#define SMA_wCurrMHdrVolRight			0x000e
-#define SMA_dwCurrPlayPitch			0x0010
-#define SMA_dwCurrPlayRate			0x0014
-#define SMA_wCurrMIDIIOPatch			0x0018
-#define SMA_wCurrPlayFormat			0x001a
-#define SMA_wCurrPlaySampleSize			0x001c
-#define SMA_wCurrPlayChannels			0x001e
-#define SMA_wCurrPlaySampleRate			0x0020
-#define SMA_wCurrRecordFormat			0x0022
-#define SMA_wCurrRecordSampleSize		0x0024
-#define SMA_wCurrRecordChannels			0x0026
-#define SMA_wCurrRecordSampleRate		0x0028
-#define SMA_wCurrDSPStatusFlags			0x002a
-#define SMA_wCurrHostStatusFlags		0x002c
-#define SMA_wCurrInputTagBits			0x002e
-#define SMA_wCurrLeftPeak			0x0030
-#define SMA_wCurrRightPeak			0x0032
-#define SMA_bMicPotPosLeft			0x0034
-#define SMA_bMicPotPosRight			0x0035
-#define SMA_bMicPotMaxLeft			0x0036
-#define SMA_bMicPotMaxRight			0x0037
-#define SMA_bInPotPosLeft			0x0038
-#define SMA_bInPotPosRight			0x0039
-#define SMA_bAuxPotPosLeft			0x003a
-#define SMA_bAuxPotPosRight			0x003b
-#define SMA_bInPotMaxLeft			0x003c
-#define SMA_bInPotMaxRight			0x003d
-#define SMA_bAuxPotMaxLeft			0x003e
-#define SMA_bAuxPotMaxRight			0x003f
-#define SMA_bInPotMaxMethod			0x0040
-#define SMA_bAuxPotMaxMethod			0x0041
-#define SMA_wCurrMastVolLeft			0x0042
-#define SMA_wCurrMastVolRight			0x0044
-#define SMA_wCalFreqAtoD			0x0046
-#define SMA_wCurrAuxVolLeft			0x0048
-#define SMA_wCurrAuxVolRight			0x004a
-#define SMA_wCurrPlay1VolLeft			0x004c
-#define SMA_wCurrPlay1VolRight			0x004e
-#define SMA_wCurrPlay2VolLeft			0x0050
-#define SMA_wCurrPlay2VolRight			0x0052
-#define SMA_wCurrPlay3VolLeft			0x0054
-#define SMA_wCurrPlay3VolRight			0x0056
-#define SMA_wCurrPlay4VolLeft			0x0058
-#define SMA_wCurrPlay4VolRight			0x005a
-#define SMA_wCurrPlay1PeakLeft			0x005c
-#define SMA_wCurrPlay1PeakRight			0x005e
-#define SMA_wCurrPlay2PeakLeft			0x0060
-#define SMA_wCurrPlay2PeakRight			0x0062
-#define SMA_wCurrPlay3PeakLeft			0x0064
-#define SMA_wCurrPlay3PeakRight			0x0066
-#define SMA_wCurrPlay4PeakLeft			0x0068
-#define SMA_wCurrPlay4PeakRight			0x006a
-#define SMA_wCurrPlayPeakLeft			0x006c
-#define SMA_wCurrPlayPeakRight			0x006e
-#define SMA_wCurrDATSR				0x0070
-#define SMA_wCurrDATRXCHNL			0x0072
-#define SMA_wCurrDATTXCHNL			0x0074
-#define SMA_wCurrDATRXRate			0x0076
-#define SMA_dwDSPPlayCount			0x0078
-#define SMA__size				0x007c
-
-#ifdef HAVE_DSPCODEH
-#  include "pndsperm.c"
-#  include "pndspini.c"
-#  define PERMCODE		pndsperm
-#  define INITCODE		pndspini
-#  define PERMCODESIZE		sizeof(pndsperm)
-#  define INITCODESIZE		sizeof(pndspini)
-#else
-#  ifndef CONFIG_MSNDPIN_INIT_FILE
-#    define CONFIG_MSNDPIN_INIT_FILE				\
-				"/etc/sound/pndspini.bin"
-#  endif
-#  ifndef CONFIG_MSNDPIN_PERM_FILE
-#    define CONFIG_MSNDPIN_PERM_FILE				\
-				"/etc/sound/pndsperm.bin"
-#  endif
-#  define PERMCODEFILE		CONFIG_MSNDPIN_PERM_FILE
-#  define INITCODEFILE		CONFIG_MSNDPIN_INIT_FILE
-#  define PERMCODE		dspini
-#  define INITCODE		permini
-#  define PERMCODESIZE		sizeof_dspini
-#  define INITCODESIZE		sizeof_permini
-#endif
-#define LONGNAME		"MultiSound (Pinnacle/Fiji)"
-
-#endif /* __MSND_PINNACLE_H */
diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c
deleted file mode 100644
index f0f5b5be6314..000000000000
--- a/sound/oss/opl3.c
+++ /dev/null
@@ -1,1255 +0,0 @@
-/*
- * sound/oss/opl3.c
- *
- * A low level driver for Yamaha YM3812 and OPL-3 -chips
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Changes
- *	Thomas Sailer   	ioctl code reworked (vmalloc/vfree removed)
- *	Alan Cox		modularisation, fixed sound_mem allocs.
- *	Christoph Hellwig	Adapted to module_init/module_exit
- *	Arnaldo C. de Melo	get rid of check_region, use request_region for
- *				OPL4, release it on exit, some cleanups.
- *
- * Status
- *	Believed to work. Badly needs rewriting a bit to support multiple
- *	OPL3 devices.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-
-/*
- * Major improvements to the FM handling 30AUG92 by Rob Hooft,
- * hooft@chem.ruu.nl
- */
-
-#include "sound_config.h"
-
-#include "opl3_hw.h"
-
-#define MAX_VOICE	18
-#define OFFS_4OP	11
-
-struct voice_info
-{
-	unsigned char   keyon_byte;
-	long            bender;
-	long            bender_range;
-	unsigned long   orig_freq;
-	unsigned long   current_freq;
-	int             volume;
-	int             mode;
-	int             panning;	/* 0xffff means not set */
-};
-
-struct opl_devinfo
-{
-	int             base;
-	int             left_io, right_io;
-	int             nr_voice;
-	int             lv_map[MAX_VOICE];
-
-	struct voice_info voc[MAX_VOICE];
-	struct voice_alloc_info *v_alloc;
-	struct channel_info *chn_info;
-
-	struct sbi_instrument i_map[SBFM_MAXINSTR];
-	struct sbi_instrument *act_i[MAX_VOICE];
-
-	struct synth_info fm_info;
-
-	int             busy;
-	int             model;
-	unsigned char   cmask;
-
-	int             is_opl4;
-};
-
-static struct opl_devinfo *devc = NULL;
-
-static int      detected_model;
-
-static int      store_instr(int instr_no, struct sbi_instrument *instr);
-static void     freq_to_fnum(int freq, int *block, int *fnum);
-static void     opl3_command(int io_addr, unsigned int addr, unsigned int val);
-static int      opl3_kill_note(int dev, int voice, int note, int velocity);
-
-static void enter_4op_mode(void)
-{
-	int i;
-	static int v4op[MAX_VOICE] = {
-		0, 1, 2, 9, 10, 11, 6, 7, 8, 15, 16, 17
-	};
-
-	devc->cmask = 0x3f;	/* Connect all possible 4 OP voice operators */
-	opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x3f);
-
-	for (i = 0; i < 3; i++)
-		pv_map[i].voice_mode = 4;
-	for (i = 3; i < 6; i++)
-		pv_map[i].voice_mode = 0;
-
-	for (i = 9; i < 12; i++)
-		pv_map[i].voice_mode = 4;
-	for (i = 12; i < 15; i++)
-		pv_map[i].voice_mode = 0;
-
-	for (i = 0; i < 12; i++)
-		devc->lv_map[i] = v4op[i];
-	devc->v_alloc->max_voice = devc->nr_voice = 12;
-}
-
-static int opl3_ioctl(int dev, unsigned int cmd, void __user * arg)
-{
-	struct sbi_instrument ins;
-	
-	switch (cmd) {
-		case SNDCTL_FM_LOAD_INSTR:
-			printk(KERN_WARNING "Warning: Obsolete ioctl(SNDCTL_FM_LOAD_INSTR) used. Fix the program.\n");
-			if (copy_from_user(&ins, arg, sizeof(ins)))
-				return -EFAULT;
-			if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR) {
-				printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel);
-				return -EINVAL;
-			}
-			return store_instr(ins.channel, &ins);
-
-		case SNDCTL_SYNTH_INFO:
-			devc->fm_info.nr_voices = (devc->nr_voice == 12) ? 6 : devc->nr_voice;
-			if (copy_to_user(arg, &devc->fm_info, sizeof(devc->fm_info)))
-				return -EFAULT;
-			return 0;
-
-		case SNDCTL_SYNTH_MEMAVL:
-			return 0x7fffffff;
-
-		case SNDCTL_FM_4OP_ENABLE:
-			if (devc->model == 2)
-				enter_4op_mode();
-			return 0;
-
-		default:
-			return -EINVAL;
-	}
-}
-
-static int opl3_detect(int ioaddr)
-{
-	/*
-	 * This function returns 1 if the FM chip is present at the given I/O port
-	 * The detection algorithm plays with the timer built in the FM chip and
-	 * looks for a change in the status register.
-	 *
-	 * Note! The timers of the FM chip are not connected to AdLib (and compatible)
-	 * boards.
-	 *
-	 * Note2! The chip is initialized if detected.
-	 */
-
-	unsigned char stat1, signature;
-	int i;
-
-	if (devc != NULL)
-	{
-		printk(KERN_ERR "opl3: Only one OPL3 supported.\n");
-		return 0;
-	}
-
-	devc = kzalloc(sizeof(*devc), GFP_KERNEL);
-
-	if (devc == NULL)
-	{
-		printk(KERN_ERR "opl3: Can't allocate memory for the device control "
-			"structure \n ");
-		return 0;
-	}
-
-	strcpy(devc->fm_info.name, "OPL2");
-
-	if (!request_region(ioaddr, 4, devc->fm_info.name)) {
-		printk(KERN_WARNING "opl3: I/O port 0x%x already in use\n", ioaddr);
-		goto cleanup_devc;
-	}
-
-	devc->base = ioaddr;
-
-	/* Reset timers 1 and 2 */
-	opl3_command(ioaddr, TIMER_CONTROL_REGISTER, TIMER1_MASK | TIMER2_MASK);
-
-	/* Reset the IRQ of the FM chip */
-	opl3_command(ioaddr, TIMER_CONTROL_REGISTER, IRQ_RESET);
-
-	signature = stat1 = inb(ioaddr);	/* Status register */
-
-	if (signature != 0x00 && signature != 0x06 && signature != 0x02 &&
-		signature != 0x0f)
-	{
-		MDB(printk(KERN_INFO "OPL3 not detected %x\n", signature));
-		goto cleanup_region;
-	}
-
-	if (signature == 0x06)		/* OPL2 */
-	{
-		detected_model = 2;
-	}
-	else if (signature == 0x00 || signature == 0x0f)	/* OPL3 or OPL4 */
-	{
-		unsigned char tmp;
-
-		detected_model = 3;
-
-		/*
-		 * Detect availability of OPL4 (_experimental_). Works probably
-		 * only after a cold boot. In addition the OPL4 port
-		 * of the chip may not be connected to the PC bus at all.
-		 */
-
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0x00);
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, OPL3_ENABLE | OPL4_ENABLE);
-
-		if ((tmp = inb(ioaddr)) == 0x02)	/* Have a OPL4 */
-		{
-			detected_model = 4;
-		}
-
-		if (request_region(ioaddr - 8, 2, "OPL4"))	/* OPL4 port was free */
-		{
-			int tmp;
-
-			outb((0x02), ioaddr - 8);	/* Select OPL4 ID register */
-			udelay(10);
-			tmp = inb(ioaddr - 7);		/* Read it */
-			udelay(10);
-
-			if (tmp == 0x20)	/* OPL4 should return 0x20 here */
-			{
-				detected_model = 4;
-				outb((0xF8), ioaddr - 8);	/* Select OPL4 FM mixer control */
-				udelay(10);
-				outb((0x1B), ioaddr - 7);	/* Write value */
-				udelay(10);
-			}
-			else
-			{ /* release OPL4 port */
-				release_region(ioaddr - 8, 2);
-				detected_model = 3;
-			}
-		}
-		opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0);
-	}
-	for (i = 0; i < 9; i++)
-		opl3_command(ioaddr, KEYON_BLOCK + i, 0);	/*
-								 * Note off
-								 */
-
-	opl3_command(ioaddr, TEST_REGISTER, ENABLE_WAVE_SELECT);
-	opl3_command(ioaddr, PERCOSSION_REGISTER, 0x00);	/*
-								 * Melodic mode.
-								 */
-	return 1;
-cleanup_region:
-	release_region(ioaddr, 4);
-cleanup_devc:
-	kfree(devc);
-	devc = NULL;
-	return 0;
-}
-
-static int opl3_kill_note  (int devno, int voice, int note, int velocity)
-{
-	 struct physical_voice_info *map;
-
-	 if (voice < 0 || voice >= devc->nr_voice)
-		 return 0;
-
-	 devc->v_alloc->map[voice] = 0;
-
-	 map = &pv_map[devc->lv_map[voice]];
-
-	 if (map->voice_mode == 0)
-		 return 0;
-
-	 opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, devc->voc[voice].keyon_byte & ~0x20);
-	 devc->voc[voice].keyon_byte = 0;
-	 devc->voc[voice].bender = 0;
-	 devc->voc[voice].volume = 64;
-	 devc->voc[voice].panning = 0xffff;	/* Not set */
-	 devc->voc[voice].bender_range = 200;
-	 devc->voc[voice].orig_freq = 0;
-	 devc->voc[voice].current_freq = 0;
-	 devc->voc[voice].mode = 0;
-	 return 0;
-}
-
-#define HIHAT			0
-#define CYMBAL			1
-#define TOMTOM			2
-#define SNARE			3
-#define BDRUM			4
-#define UNDEFINED		TOMTOM
-#define DEFAULT			TOMTOM
-
-static int store_instr(int instr_no, struct sbi_instrument *instr)
-{
-	if (instr->key != FM_PATCH && (instr->key != OPL3_PATCH || devc->model != 2))
-		printk(KERN_WARNING "FM warning: Invalid patch format field (key) 0x%x\n", instr->key);
-	memcpy((char *) &(devc->i_map[instr_no]), (char *) instr, sizeof(*instr));
-	return 0;
-}
-
-static int opl3_set_instr  (int dev, int voice, int instr_no)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return 0;
-	if (instr_no < 0 || instr_no >= SBFM_MAXINSTR)
-		instr_no = 0;	/* Acoustic piano (usually) */
-
-	devc->act_i[voice] = &devc->i_map[instr_no];
-	return 0;
-}
-
-/*
- * The next table looks magical, but it certainly is not. Its values have
- * been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception
- * for i=0. This log-table converts a linear volume-scaling (0..127) to a
- * logarithmic scaling as present in the FM-synthesizer chips. so :    Volume
- * 64 =  0 db = relative volume  0 and:    Volume 32 = -6 db = relative
- * volume -8 it was implemented as a table because it is only 128 bytes and
- * it saves a lot of log() calculations. (RH)
- */
-
-static char fm_volume_table[128] =
-{
-	-64, -48, -40, -35, -32, -29, -27, -26,
-	-24, -23, -21, -20, -19, -18, -18, -17,
-	-16, -15, -15, -14, -13, -13, -12, -12,
-	-11, -11, -10, -10, -10, -9, -9, -8,
-	-8, -8, -7, -7, -7, -6, -6, -6,
-	-5, -5, -5, -5, -4, -4, -4, -4,
-	-3, -3, -3, -3, -2, -2, -2, -2,
-	-2, -1, -1, -1, -1, 0, 0, 0,
-	0, 0, 0, 1, 1, 1, 1, 1,
-	1, 2, 2, 2, 2, 2, 2, 2,
-	3, 3, 3, 3, 3, 3, 3, 4,
-	4, 4, 4, 4, 4, 4, 4, 5,
-	5, 5, 5, 5, 5, 5, 5, 5,
-	6, 6, 6, 6, 6, 6, 6, 6,
-	6, 7, 7, 7, 7, 7, 7, 7,
-	7, 7, 7, 8, 8, 8, 8, 8
-};
-
-static void calc_vol(unsigned char *regbyte, int volume, int main_vol)
-{
-	int level = (~*regbyte & 0x3f);
-
-	if (main_vol > 127)
-		main_vol = 127;
-	volume = (volume * main_vol) / 127;
-
-	if (level)
-		level += fm_volume_table[volume];
-
-	if (level > 0x3f)
-		level = 0x3f;
-	if (level < 0)
-		level = 0;
-
-	*regbyte = (*regbyte & 0xc0) | (~level & 0x3f);
-}
-
-static void set_voice_volume(int voice, int volume, int main_vol)
-{
-	unsigned char vol1, vol2, vol3, vol4;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	map = &pv_map[devc->lv_map[voice]];
-	instr = devc->act_i[voice];
-
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (instr->channel < 0)
-		return;
-
-	if (devc->voc[voice].mode == 0)
-		return;
-
-	if (devc->voc[voice].mode == 2)
-	{
-		vol1 = instr->operators[2];
-		vol2 = instr->operators[3];
-		if ((instr->operators[10] & 0x01))
-		{
-			calc_vol(&vol1, volume, main_vol);
-			calc_vol(&vol2, volume, main_vol);
-		}
-		else
-		{
-			calc_vol(&vol2, volume, main_vol);
-		}
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2);
-	}
-	else
-	{	/*
-		 * 4 OP voice
-		 */
-		int connection;
-
-		vol1 = instr->operators[2];
-		vol2 = instr->operators[3];
-		vol3 = instr->operators[OFFS_4OP + 2];
-		vol4 = instr->operators[OFFS_4OP + 3];
-
-		/*
-		 * The connection method for 4 OP devc->voc is defined by the rightmost
-		 * bits at the offsets 10 and 10+OFFS_4OP
-		 */
-
-		connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01);
-
-		switch (connection)
-		{
-			case 0:
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 1:
-				calc_vol(&vol2, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 2:
-				calc_vol(&vol1, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			case 3:
-				calc_vol(&vol1, volume, main_vol);
-				calc_vol(&vol3, volume, main_vol);
-				calc_vol(&vol4, volume, main_vol);
-				break;
-
-			default:
-				;
-		}
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], vol3);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], vol4);
-	}
-}
-
-static int opl3_start_note (int dev, int voice, int note, int volume)
-{
-	unsigned char data, fpc;
-	int block, fnum, freq, voice_mode, pan;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return 0;
-
-	map = &pv_map[devc->lv_map[voice]];
-	pan = devc->voc[voice].panning;
-
-	if (map->voice_mode == 0)
-		return 0;
-
-	if (note == 255)	/*
-				 * Just change the volume
-				 */
-	{
-		set_voice_volume(voice, volume, devc->voc[voice].volume);
-		return 0;
-	}
-
-	/*
-	 * Kill previous note before playing
-	 */
-	
-	opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], 0xff);	/*
-									 * Carrier
-									 * volume to
-									 * min
-									 */
-	opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], 0xff);	/*
-									 * Modulator
-									 * volume to
-									 */
-
-	if (map->voice_mode == 4)
-	{
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], 0xff);
-		opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], 0xff);
-	}
-
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, 0x00);	/*
-									 * Note
-									 * off
-									 */
-
-	instr = devc->act_i[voice];
-	
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (instr->channel < 0)
-	{
-		printk(KERN_WARNING "opl3: Initializing voice %d with undefined instrument\n", voice);
-		return 0;
-	}
-
-	if (map->voice_mode == 2 && instr->key == OPL3_PATCH)
-		return 0;	/*
-				 * Cannot play
-				 */
-
-	voice_mode = map->voice_mode;
-
-	if (voice_mode == 4)
-	{
-		int voice_shift;
-
-		voice_shift = (map->ioaddr == devc->left_io) ? 0 : 3;
-		voice_shift += map->voice_num;
-
-		if (instr->key != OPL3_PATCH)	/*
-						 * Just 2 OP patch
-						 */
-		{
-			voice_mode = 2;
-			devc->cmask &= ~(1 << voice_shift);
-		}
-		else
-		{
-			devc->cmask |= (1 << voice_shift);
-		}
-
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask);
-	}
-
-	/*
-	 * Set Sound Characteristics
-	 */
-	
-	opl3_command(map->ioaddr, AM_VIB + map->op[0], instr->operators[0]);
-	opl3_command(map->ioaddr, AM_VIB + map->op[1], instr->operators[1]);
-
-	/*
-	 * Set Attack/Decay
-	 */
-	
-	opl3_command(map->ioaddr, ATTACK_DECAY + map->op[0], instr->operators[4]);
-	opl3_command(map->ioaddr, ATTACK_DECAY + map->op[1], instr->operators[5]);
-
-	/*
-	 * Set Sustain/Release
-	 */
-	
-	opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[0], instr->operators[6]);
-	opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[1], instr->operators[7]);
-
-	/*
-	 * Set Wave Select
-	 */
-
-	opl3_command(map->ioaddr, WAVE_SELECT + map->op[0], instr->operators[8]);
-	opl3_command(map->ioaddr, WAVE_SELECT + map->op[1], instr->operators[9]);
-
-	/*
-	 * Set Feedback/Connection
-	 */
-	
-	fpc = instr->operators[10];
-
-	if (pan != 0xffff)
-	{
-		fpc &= ~STEREO_BITS;
-		if (pan < -64)
-			fpc |= VOICE_TO_LEFT;
-		else
-			if (pan > 64)
-				fpc |= VOICE_TO_RIGHT;
-			else
-				fpc |= (VOICE_TO_LEFT | VOICE_TO_RIGHT);
-	}
-
-	if (!(fpc & 0x30))
-		fpc |= 0x30;	/*
-				 * Ensure that at least one chn is enabled
-				 */
-	opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num, fpc);
-
-	/*
-	 * If the voice is a 4 OP one, initialize the operators 3 and 4 also
-	 */
-
-	if (voice_mode == 4)
-	{
-		/*
-		 * Set Sound Characteristics
-		 */
-	
-		opl3_command(map->ioaddr, AM_VIB + map->op[2], instr->operators[OFFS_4OP + 0]);
-		opl3_command(map->ioaddr, AM_VIB + map->op[3], instr->operators[OFFS_4OP + 1]);
-
-		/*
-		 * Set Attack/Decay
-		 */
-		
-		opl3_command(map->ioaddr, ATTACK_DECAY + map->op[2], instr->operators[OFFS_4OP + 4]);
-		opl3_command(map->ioaddr, ATTACK_DECAY + map->op[3], instr->operators[OFFS_4OP + 5]);
-
-		/*
-		 * Set Sustain/Release
-		 */
-		
-		opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[2], instr->operators[OFFS_4OP + 6]);
-		opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[3], instr->operators[OFFS_4OP + 7]);
-
-		/*
-		 * Set Wave Select
-		 */
-		
-		opl3_command(map->ioaddr, WAVE_SELECT + map->op[2], instr->operators[OFFS_4OP + 8]);
-		opl3_command(map->ioaddr, WAVE_SELECT + map->op[3], instr->operators[OFFS_4OP + 9]);
-
-		/*
-		 * Set Feedback/Connection
-		 */
-		
-		fpc = instr->operators[OFFS_4OP + 10];
-		if (!(fpc & 0x30))
-			 fpc |= 0x30;	/*
-					 * Ensure that at least one chn is enabled
-					 */
-		opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num + 3, fpc);
-	}
-
-	devc->voc[voice].mode = voice_mode;
-	set_voice_volume(voice, volume, devc->voc[voice].volume);
-
-	freq = devc->voc[voice].orig_freq = note_to_freq(note) / 1000;
-
-	/*
-	 * Since the pitch bender may have been set before playing the note, we
-	 * have to calculate the bending now.
-	 */
-
-	freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0);
-	devc->voc[voice].current_freq = freq;
-
-	freq_to_fnum(freq, &block, &fnum);
-
-	/*
-	 * Play note
-	 */
-
-	data = fnum & 0xff;	/*
-				 * Least significant bits of fnumber
-				 */
-	opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data);
-
-	data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3);
-	devc->voc[voice].keyon_byte = data;
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data);
-	if (voice_mode == 4)
-		opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num + 3, data);
-
-	return 0;
-}
-
-static void freq_to_fnum    (int freq, int *block, int *fnum)
-{
-	int f, octave;
-
-	/*
-	 * Converts the note frequency to block and fnum values for the FM chip
-	 */
-	/*
-	 * First try to compute the block -value (octave) where the note belongs
-	 */
-
-	f = freq;
-
-	octave = 5;
-
-	if (f == 0)
-		octave = 0;
-	else if (f < 261)
-	{
-		while (f < 261)
-		{
-			octave--;
-			f <<= 1;
-		}
-	}
-	else if (f > 493)
-	{
-		while (f > 493)
-		{
-			 octave++;
-			 f >>= 1;
-		}
-	}
-
-	if (octave > 7)
-		octave = 7;
-
-	*fnum = freq * (1 << (20 - octave)) / 49716;
-	*block = octave;
-}
-
-static void opl3_command    (int io_addr, unsigned int addr, unsigned int val)
-{
-	int i;
-
-	/*
-	 * The original 2-OP synth requires a quite long delay after writing to a
-	 * register. The OPL-3 survives with just two INBs
-	 */
-
-	outb(((unsigned char) (addr & 0xff)), io_addr);
-
-	if (devc->model != 2)
-		udelay(10);
-	else
-		for (i = 0; i < 2; i++)
-			inb(io_addr);
-
-	outb(((unsigned char) (val & 0xff)), io_addr + 1);
-
-	if (devc->model != 2)
-		udelay(30);
-	else
-		for (i = 0; i < 2; i++)
-			inb(io_addr);
-}
-
-static void opl3_reset(int devno)
-{
-	int i;
-
-	for (i = 0; i < 18; i++)
-		devc->lv_map[i] = i;
-
-	for (i = 0; i < devc->nr_voice; i++)
-	{
-		opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-			KSL_LEVEL + pv_map[devc->lv_map[i]].op[0], 0xff);
-
-		opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-			KSL_LEVEL + pv_map[devc->lv_map[i]].op[1], 0xff);
-
-		if (pv_map[devc->lv_map[i]].voice_mode == 4)
-		{
-			opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-				KSL_LEVEL + pv_map[devc->lv_map[i]].op[2], 0xff);
-
-			opl3_command(pv_map[devc->lv_map[i]].ioaddr,
-				KSL_LEVEL + pv_map[devc->lv_map[i]].op[3], 0xff);
-		}
-
-		opl3_kill_note(devno, i, 0, 64);
-	}
-
-	if (devc->model == 2)
-	{
-		devc->v_alloc->max_voice = devc->nr_voice = 18;
-
-		for (i = 0; i < 18; i++)
-			pv_map[i].voice_mode = 2;
-
-	}
-}
-
-static int opl3_open(int dev, int mode)
-{
-	int i;
-
-	if (devc->busy)
-		return -EBUSY;
-	devc->busy = 1;
-
-	devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9;
-	devc->v_alloc->timestamp = 0;
-
-	for (i = 0; i < 18; i++)
-	{
-		devc->v_alloc->map[i] = 0;
-		devc->v_alloc->alloc_times[i] = 0;
-	}
-
-	devc->cmask = 0x00;	/*
-				 * Just 2 OP mode
-				 */
-	if (devc->model == 2)
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask);
-	return 0;
-}
-
-static void opl3_close(int dev)
-{
-	devc->busy = 0;
-	devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9;
-
-	devc->fm_info.nr_drums = 0;
-	devc->fm_info.perc_mode = 0;
-
-	opl3_reset(dev);
-}
-
-static void opl3_hw_control(int dev, unsigned char *event)
-{
-}
-
-static int opl3_load_patch(int dev, int format, const char __user *addr,
-		int count, int pmgr_flag)
-{
-	struct sbi_instrument ins;
-
-	if (count <sizeof(ins))
-	{
-		printk(KERN_WARNING "FM Error: Patch record too short\n");
-		return -EINVAL;
-	}
-
-	if (copy_from_user(&ins, addr, sizeof(ins)))
-		return -EFAULT;
-
-	if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR)
-	{
-		printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel);
-		return -EINVAL;
-	}
-	ins.key = format;
-
-	return store_instr(ins.channel, &ins);
-}
-
-static void opl3_panning(int dev, int voice, int value)
-{
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	devc->voc[voice].panning = value;
-}
-
-static void opl3_volume_method(int dev, int mode)
-{
-}
-
-#define SET_VIBRATO(cell) { \
-	tmp = instr->operators[(cell-1)+(((cell-1)/2)*OFFS_4OP)]; \
-	if (pressure > 110) \
-		tmp |= 0x40;		/* Vibrato on */ \
-	opl3_command (map->ioaddr, AM_VIB + map->op[cell-1], tmp);}
-
-static void opl3_aftertouch(int dev, int voice, int pressure)
-{
-	int tmp;
-	struct sbi_instrument *instr;
-	struct physical_voice_info *map;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	map = &pv_map[devc->lv_map[voice]];
-
-	if (map->voice_mode == 0)
-		return;
-
-	/*
-	 * Adjust the amount of vibrato depending the pressure
-	 */
-
-	instr = devc->act_i[voice];
-
-	if (!instr)
-		instr = &devc->i_map[0];
-
-	if (devc->voc[voice].mode == 4)
-	{
-		int connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01);
-
-		switch (connection)
-		{
-			case 0:
-				SET_VIBRATO(4);
-				break;
-
-			case 1:
-				SET_VIBRATO(2);
-				SET_VIBRATO(4);
-				break;
-
-			case 2:
-				SET_VIBRATO(1);
-				SET_VIBRATO(4);
-				break;
-
-			case 3:
-				SET_VIBRATO(1);
-				SET_VIBRATO(3);
-				SET_VIBRATO(4);
-				break;
-
-		}
-		/*
-		 * Not implemented yet
-		 */
-	}
-	else
-	{
-		SET_VIBRATO(1);
-
-		if ((instr->operators[10] & 0x01))	/*
-							 * Additive synthesis
-							 */
-			SET_VIBRATO(2);
-	}
-}
-
-#undef SET_VIBRATO
-
-static void bend_pitch(int dev, int voice, int value)
-{
-	unsigned char data;
-	int block, fnum, freq;
-	struct physical_voice_info *map;
-
-	map = &pv_map[devc->lv_map[voice]];
-
-	if (map->voice_mode == 0)
-		return;
-
-	devc->voc[voice].bender = value;
-	if (!value)
-		return;
-	if (!(devc->voc[voice].keyon_byte & 0x20))
-		return;	/*
-			 * Not keyed on
-			 */
-
-	freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0);
-	devc->voc[voice].current_freq = freq;
-
-	freq_to_fnum(freq, &block, &fnum);
-
-	data = fnum & 0xff;	/*
-				 * Least significant bits of fnumber
-				 */
-	opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data);
-
-	data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3);
-	devc->voc[voice].keyon_byte = data;
-	opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data);
-}
-
-static void opl3_controller (int dev, int voice, int ctrl_num, int value)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	switch (ctrl_num)
-	{
-		case CTRL_PITCH_BENDER:
-			bend_pitch(dev, voice, value);
-			break;
-
-		case CTRL_PITCH_BENDER_RANGE:
-			devc->voc[voice].bender_range = value;
-			break;
-
-		case CTL_MAIN_VOLUME:
-			devc->voc[voice].volume = value / 128;
-			break;
-
-		case CTL_PAN:
-			devc->voc[voice].panning = (value * 2) - 128;
-			break;
-	}
-}
-
-static void opl3_bender(int dev, int voice, int value)
-{
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	bend_pitch(dev, voice, value - 8192);
-}
-
-static int opl3_alloc_voice(int dev, int chn, int note, struct voice_alloc_info *alloc)
-{
-	int i, p, best, first, avail, best_time = 0x7fffffff;
-	struct sbi_instrument *instr;
-	int is4op;
-	int instr_no;
-
-	if (chn < 0 || chn > 15)
-		instr_no = 0;
-	else
-		instr_no = devc->chn_info[chn].pgm_num;
-
-	instr = &devc->i_map[instr_no];
-	if (instr->channel < 0 ||	/* Instrument not loaded */
-		devc->nr_voice != 12)	/* Not in 4 OP mode */
-		is4op = 0;
-	else if (devc->nr_voice == 12)	/* 4 OP mode */
-		is4op = (instr->key == OPL3_PATCH);
-	else
-		is4op = 0;
-
-	if (is4op)
-	{
-		first = p = 0;
-		avail = 6;
-	}
-	else
-	{
-		if (devc->nr_voice == 12)	/* 4 OP mode. Use the '2 OP only' operators first */
-			first = p = 6;
-		else
-			first = p = 0;
-		avail = devc->nr_voice;
-	}
-
-	/*
-	 *    Now try to find a free voice
-	 */
-	best = first;
-
-	for (i = 0; i < avail; i++)
-	{
-		if (alloc->map[p] == 0)
-		{
-			return p;
-		}
-		if (alloc->alloc_times[p] < best_time)		/* Find oldest playing note */
-		{
-			best_time = alloc->alloc_times[p];
-			best = p;
-		}
-		p = (p + 1) % avail;
-	}
-
-	/*
-	 *    Insert some kind of priority mechanism here.
-	 */
-
-	if (best < 0)
-		best = 0;
-	if (best > devc->nr_voice)
-		best -= devc->nr_voice;
-
-	return best;	/* All devc->voc in use. Select the first one. */
-}
-
-static void opl3_setup_voice(int dev, int voice, int chn)
-{
-	struct channel_info *info;
-
-	if (voice < 0 || voice >= devc->nr_voice)
-		return;
-
-	if (chn < 0 || chn > 15)
-		return;
-
-	info = &synth_devs[dev]->chn_info[chn];
-
-	opl3_set_instr(dev, voice, info->pgm_num);
-
-	devc->voc[voice].bender = 0;
-	devc->voc[voice].bender_range = info->bender_range;
-	devc->voc[voice].volume = info->controllers[CTL_MAIN_VOLUME];
-	devc->voc[voice].panning = (info->controllers[CTL_PAN] * 2) - 128;
-}
-
-static struct synth_operations opl3_operations =
-{
-	.owner		= THIS_MODULE,
-	.id		= "OPL",
-	.info		= NULL,
-	.midi_dev	= 0,
-	.synth_type	= SYNTH_TYPE_FM,
-	.synth_subtype	= FM_TYPE_ADLIB,
-	.open		= opl3_open,
-	.close		= opl3_close,
-	.ioctl		= opl3_ioctl,
-	.kill_note	= opl3_kill_note,
-	.start_note	= opl3_start_note,
-	.set_instr	= opl3_set_instr,
-	.reset		= opl3_reset,
-	.hw_control	= opl3_hw_control,
-	.load_patch	= opl3_load_patch,
-	.aftertouch	= opl3_aftertouch,
-	.controller	= opl3_controller,
-	.panning	= opl3_panning,
-	.volume_method	= opl3_volume_method,
-	.bender		= opl3_bender,
-	.alloc_voice	= opl3_alloc_voice,
-	.setup_voice	= opl3_setup_voice
-};
-
-static int opl3_init(int ioaddr, struct module *owner)
-{
-	int i;
-	int me;
-
-	if (devc == NULL)
-	{
-		printk(KERN_ERR "opl3: Device control structure not initialized.\n");
-		return -1;
-	}
-
-	if ((me = sound_alloc_synthdev()) == -1)
-	{
-		printk(KERN_WARNING "opl3: Too many synthesizers\n");
-		return -1;
-	}
-
-	devc->nr_voice = 9;
-
-	devc->fm_info.device = 0;
-	devc->fm_info.synth_type = SYNTH_TYPE_FM;
-	devc->fm_info.synth_subtype = FM_TYPE_ADLIB;
-	devc->fm_info.perc_mode = 0;
-	devc->fm_info.nr_voices = 9;
-	devc->fm_info.nr_drums = 0;
-	devc->fm_info.instr_bank_size = SBFM_MAXINSTR;
-	devc->fm_info.capabilities = 0;
-	devc->left_io = ioaddr;
-	devc->right_io = ioaddr + 2;
-
-	if (detected_model <= 2)
-		devc->model = 1;
-	else
-	{
-		devc->model = 2;
-		if (detected_model == 4)
-			devc->is_opl4 = 1;
-	}
-
-	opl3_operations.info = &devc->fm_info;
-
-	synth_devs[me] = &opl3_operations;
-
-	if (owner)
-		synth_devs[me]->owner = owner;
-	
-	sequencer_init();
-	devc->v_alloc = &opl3_operations.alloc;
-	devc->chn_info = &opl3_operations.chn_info[0];
-
-	if (devc->model == 2)
-	{
-		if (devc->is_opl4) 
-			strcpy(devc->fm_info.name, "Yamaha OPL4/OPL3 FM");
-		else 
-			strcpy(devc->fm_info.name, "Yamaha OPL3");
-
-		devc->v_alloc->max_voice = devc->nr_voice = 18;
-		devc->fm_info.nr_drums = 0;
-		devc->fm_info.synth_subtype = FM_TYPE_OPL3;
-		devc->fm_info.capabilities |= SYNTH_CAP_OPL3;
-
-		for (i = 0; i < 18; i++)
-		{
-			if (pv_map[i].ioaddr == USE_LEFT)
-				pv_map[i].ioaddr = devc->left_io;
-			else
-				pv_map[i].ioaddr = devc->right_io;
-		}
-		opl3_command(devc->right_io, OPL3_MODE_REGISTER, OPL3_ENABLE);
-		opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x00);
-	}
-	else
-	{
-		strcpy(devc->fm_info.name, "Yamaha OPL2");
-		devc->v_alloc->max_voice = devc->nr_voice = 9;
-		devc->fm_info.nr_drums = 0;
-
-		for (i = 0; i < 18; i++)
-			pv_map[i].ioaddr = devc->left_io;
-	}
-	conf_printf2(devc->fm_info.name, ioaddr, 0, -1, -1);
-
-	for (i = 0; i < SBFM_MAXINSTR; i++)
-		devc->i_map[i].channel = -1;
-
-	return me;
-}
-
-static int me;
-
-static int io = -1;
-
-module_param_hw(io, int, ioport, 0);
-
-static int __init init_opl3 (void)
-{
-	printk(KERN_INFO "YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996\n");
-
-	if (io != -1)	/* User loading pure OPL3 module */
-	{
-		if (!opl3_detect(io))
-		{
-			return -ENODEV;
-		}
-
-		me = opl3_init(io, THIS_MODULE);
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_opl3(void)
-{
-	if (devc && io != -1)
-	{
-		if (devc->base) {
-			release_region(devc->base,4);
-			if (devc->is_opl4)
-				release_region(devc->base - 8, 2);
-		}
-		kfree(devc);
-		devc = NULL;
-		sound_unload_synthdev(me);
-	}
-}
-
-module_init(init_opl3);
-module_exit(cleanup_opl3);
-
-#ifndef MODULE
-static int __init setup_opl3(char *str)
-{
-        /* io  */
-	int ints[2];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io = ints[1];
-
-	return 1;
-}
-
-__setup("opl3=", setup_opl3);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/opl3_hw.h b/sound/oss/opl3_hw.h
deleted file mode 100644
index 8b11c893e869..000000000000
--- a/sound/oss/opl3_hw.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *	opl3_hw.h	- Definitions of the OPL-3 registers
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- *	The OPL-3 mode is switched on by writing 0x01, to the offset 5
- *	of the right side.
- *
- *	Another special register at the right side is at offset 4. It contains
- *	a bit mask defining which voices are used as 4 OP voices.
- *
- *	The percussive mode is implemented in the left side only.
- *
- *	With the above exceptions the both sides can be operated independently.
- *	
- *	A 4 OP voice can be created by setting the corresponding
- *	bit at offset 4 of the right side.
- *
- *	For example setting the rightmost bit (0x01) changes the
- *	first voice on the right side to the 4 OP mode. The fourth
- *	voice is made inaccessible.
- *
- *	If a voice is set to the 2 OP mode, it works like 2 OP modes
- *	of the original YM3812 (AdLib). In addition the voice can 
- *	be connected the left, right or both stereo channels. It can
- *	even be left unconnected. This works with 4 OP voices also.
- *
- *	The stereo connection bits are located in the FEEDBACK_CONNECTION
- *	register of the voice (0xC0-0xC8). In 4 OP voices these bits are
- *	in the second half of the voice.
- */
-
-/*
- *	Register numbers for the global registers
- */
-
-#define TEST_REGISTER				0x01
-#define   ENABLE_WAVE_SELECT		0x20
-
-#define TIMER1_REGISTER				0x02
-#define TIMER2_REGISTER				0x03
-#define TIMER_CONTROL_REGISTER			0x04	/* Left side */
-#define   IRQ_RESET			0x80
-#define   TIMER1_MASK			0x40
-#define   TIMER2_MASK			0x20
-#define   TIMER1_START			0x01
-#define   TIMER2_START			0x02
-
-#define CONNECTION_SELECT_REGISTER		0x04	/* Right side */
-#define   RIGHT_4OP_0			0x01
-#define   RIGHT_4OP_1			0x02
-#define   RIGHT_4OP_2			0x04
-#define   LEFT_4OP_0			0x08
-#define   LEFT_4OP_1			0x10
-#define   LEFT_4OP_2			0x20
-
-#define OPL3_MODE_REGISTER			0x05	/* Right side */
-#define   OPL3_ENABLE			0x01
-#define   OPL4_ENABLE			0x02
-
-#define KBD_SPLIT_REGISTER			0x08	/* Left side */
-#define   COMPOSITE_SINE_WAVE_MODE	0x80		/* Don't use with OPL-3? */
-#define   KEYBOARD_SPLIT		0x40
-
-#define PERCOSSION_REGISTER			0xbd	/* Left side only */
-#define   TREMOLO_DEPTH			0x80
-#define   VIBRATO_DEPTH			0x40
-#define	  PERCOSSION_ENABLE		0x20
-#define   BASSDRUM_ON			0x10
-#define   SNAREDRUM_ON			0x08
-#define   TOMTOM_ON			0x04
-#define   CYMBAL_ON			0x02
-#define   HIHAT_ON			0x01
-
-/*
- *	Offsets to the register banks for operators. To get the
- *	register number just add the operator offset to the bank offset
- *
- *	AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
- */
-#define AM_VIB					0x20
-#define   TREMOLO_ON			0x80
-#define   VIBRATO_ON			0x40
-#define   SUSTAIN_ON			0x20
-#define   KSR				0x10 	/* Key scaling rate */
-#define   MULTIPLE_MASK		0x0f	/* Frequency multiplier */
-
- /*
-  *	KSL/Total level (0x40 to 0x55)
-  */
-#define KSL_LEVEL				0x40
-#define   KSL_MASK			0xc0	/* Envelope scaling bits */
-#define   TOTAL_LEVEL_MASK		0x3f	/* Strength (volume) of OP */
-
-/*
- *	Attack / Decay rate (0x60 to 0x75)
- */
-#define ATTACK_DECAY				0x60
-#define   ATTACK_MASK			0xf0
-#define   DECAY_MASK			0x0f
-
-/*
- * Sustain level / Release rate (0x80 to 0x95)
- */
-#define SUSTAIN_RELEASE				0x80
-#define   SUSTAIN_MASK			0xf0
-#define   RELEASE_MASK			0x0f
-
-/*
- * Wave select (0xE0 to 0xF5)
- */
-#define WAVE_SELECT			0xe0
-
-/*
- *	Offsets to the register banks for voices. Just add to the
- *	voice number to get the register number.
- *
- *	F-Number low bits (0xA0 to 0xA8).
- */
-#define FNUM_LOW				0xa0
-
-/*
- *	F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
- */
-#define KEYON_BLOCK					0xb0
-#define	  KEYON_BIT				0x20
-#define	  BLOCKNUM_MASK				0x1c
-#define   FNUM_HIGH_MASK			0x03
-
-/*
- *	Feedback / Connection (0xc0 to 0xc8)
- *
- *	These registers have two new bits when the OPL-3 mode
- *	is selected. These bits controls connecting the voice
- *	to the stereo channels. For 4 OP voices this bit is
- *	defined in the second half of the voice (add 3 to the
- *	register offset).
- *
- *	For 4 OP voices the connection bit is used in the
- *	both halves (gives 4 ways to connect the operators).
- */
-#define FEEDBACK_CONNECTION				0xc0
-#define   FEEDBACK_MASK				0x0e	/* Valid just for 1st OP of a voice */
-#define   CONNECTION_BIT			0x01
-/*
- *	In the 4 OP mode there is four possible configurations how the
- *	operators can be connected together (in 2 OP modes there is just
- *	AM or FM). The 4 OP connection mode is defined by the rightmost
- *	bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
- *
- *	First half	Second half	Mode
- *
- *					 +---+
- *					 v   |
- *	0		0		>+-1-+--2--3--4-->
- *
- *
- *					
- *					 +---+
- *					 |   |
- *	0		1		>+-1-+--2-+
- *						  |->
- *					>--3----4-+
- *					
- *					 +---+
- *					 |   |
- *	1		0		>+-1-+-----+
- *						   |->
- *					>--2--3--4-+
- *
- *					 +---+
- *					 |   |
- *	1		1		>+-1-+--+
- *						|
- *					>--2--3-+->
- *						|
- *					>--4----+
- */
-#define   STEREO_BITS				0x30	/* OPL-3 only */
-#define     VOICE_TO_LEFT		0x10
-#define     VOICE_TO_RIGHT		0x20
-
-/*
- * 	Definition table for the physical voices
- */
-
-struct physical_voice_info {
-		unsigned char voice_num;
-		unsigned char voice_mode; /* 0=unavailable, 2=2 OP, 4=4 OP */
-		unsigned short ioaddr; /* I/O port (left or right side) */
-		unsigned char op[4]; /* Operator offsets */
-	};
-
-/*
- *	There is 18 possible 2 OP voices
- *	(9 in the left and 9 in the right).
- *	The first OP is the modulator and 2nd is the carrier.
- *
- *	The first three voices in the both sides may be connected
- *	with another voice to a 4 OP voice. For example voice 0
- *	can be connected with voice 3. The operators of voice 3 are
- *	used as operators 3 and 4 of the new 4 OP voice.
- *	In this case the 2 OP voice number 0 is the 'first half' and
- *	voice 3 is the second.
- */
-
-#define USE_LEFT	0
-#define USE_RIGHT	1
-
-static struct physical_voice_info pv_map[18] =
-{
-/*       No Mode Side		OP1	OP2	OP3   OP4	*/
-/*	---------------------------------------------------	*/
-	{ 0,  2, USE_LEFT,	{0x00,	0x03,	0x08, 0x0b}},
-	{ 1,  2, USE_LEFT,	{0x01,	0x04,	0x09, 0x0c}},
-	{ 2,  2, USE_LEFT,	{0x02,	0x05,	0x0a, 0x0d}},
-
-	{ 3,  2, USE_LEFT,	{0x08,	0x0b,	0x00, 0x00}},
-	{ 4,  2, USE_LEFT,	{0x09,	0x0c,	0x00, 0x00}},
-	{ 5,  2, USE_LEFT,	{0x0a,	0x0d,	0x00, 0x00}},
-
-	{ 6,  2, USE_LEFT,	{0x10,	0x13,	0x00, 0x00}}, /* Used by percussive voices */
-	{ 7,  2, USE_LEFT,	{0x11,	0x14,	0x00, 0x00}}, /* if the percussive mode */
-	{ 8,  2, USE_LEFT,	{0x12,	0x15,	0x00, 0x00}}, /* is selected */
-
-	{ 0,  2, USE_RIGHT,	{0x00,	0x03,	0x08, 0x0b}},
-	{ 1,  2, USE_RIGHT,	{0x01,	0x04,	0x09, 0x0c}},
-	{ 2,  2, USE_RIGHT,	{0x02,	0x05,	0x0a, 0x0d}},
-
-	{ 3,  2, USE_RIGHT,	{0x08,	0x0b,	0x00, 0x00}},
-	{ 4,  2, USE_RIGHT,	{0x09,	0x0c,	0x00, 0x00}},
-	{ 5,  2, USE_RIGHT,	{0x0a,	0x0d,	0x00, 0x00}},
-
-	{ 6,  2, USE_RIGHT,	{0x10,	0x13,	0x00, 0x00}},
-	{ 7,  2, USE_RIGHT,	{0x11,	0x14,	0x00, 0x00}},
-	{ 8,  2, USE_RIGHT,	{0x12,	0x15,	0x00, 0x00}}
-};
-/*
- *	DMA buffer calls
- */
diff --git a/sound/oss/os.h b/sound/oss/os.h
deleted file mode 100644
index 0bf89e1d679c..000000000000
--- a/sound/oss/os.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#define ALLOW_SELECT
-#undef NO_INLINE_ASM
-#define SHORT_BANNERS
-#define MANUAL_PNP
-#undef  DO_TIMINGS
-
-#include <linux/module.h>
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/param.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <asm/page.h>
-#include <linux/vmalloc.h>
-#include <linux/uaccess.h>
-#include <linux/poll.h>
-#include <linux/pci.h>
-#endif
-
-#include <linux/soundcard.h>
-
-#define FALSE	0
-#define TRUE	1
-
-extern int sound_alloc_dma(int chn, char *deviceID);
-extern int sound_open_dma(int chn, char *deviceID);
-extern void sound_free_dma(int chn);
-extern void sound_close_dma(int chn);
-
-extern void reprogram_timer(void);
-
-#define USE_AUTOINIT_DMA
-
-extern void *sound_mem_blocks[1024];
-extern int sound_nblocks;
-
-#undef PSEUDO_DMA_AUTOINIT
-#define ALLOW_BUFFER_MAPPING
-
-extern const struct file_operations oss_sound_fops;
diff --git a/sound/oss/pas2.h b/sound/oss/pas2.h
deleted file mode 100644
index d19f757dbd79..000000000000
--- a/sound/oss/pas2.h
+++ /dev/null
@@ -1,20 +0,0 @@
-
-/*	From pas_card.c	*/
-int pas_set_intr(int mask);
-int pas_remove_intr(int mask);
-unsigned char pas_read(int ioaddr);
-void pas_write(unsigned char data, int ioaddr);
-
-/*	From pas_audio.c */
-void pas_pcm_interrupt(unsigned char status, int cause);
-void pas_pcm_init(struct address_info *hw_config);
-
-/*	From pas_mixer.c */
-int pas_init_mixer(void);
-
-/*	From pas_midi.c */
-void pas_midi_init(void);
-void pas_midi_interrupt(void);
-
-/*	From pas2_mixer.c*/
-void mix_write(unsigned char data, int ioaddr);
diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c
deleted file mode 100644
index 769fca692d2a..000000000000
--- a/sound/oss/pas2_card.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * sound/oss/pas2_card.c
- *
- * Detection routine for the Pro Audio Spectrum cards.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "pas2.h"
-#include "sb.h"
-
-static unsigned char dma_bits[] = {
-	4, 1, 2, 3, 0, 5, 6, 7
-};
-
-static unsigned char irq_bits[] = {
-	0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
-};
-
-static unsigned char sb_irq_bits[] = {
-	0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, 
-	0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
-};
-
-static unsigned char sb_dma_bits[] = {
-	0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
-};
-
-/*
- * The Address Translation code is used to convert I/O register addresses to
- * be relative to the given base -register
- */
-
-int      	pas_translate_code = 0;
-static int      pas_intr_mask;
-static int      pas_irq;
-static int      pas_sb_base;
-DEFINE_SPINLOCK(pas_lock);
-#ifndef CONFIG_PAS_JOYSTICK
-static bool	joystick;
-#else
-static bool 	joystick = 1;
-#endif
-#ifdef SYMPHONY_PAS
-static bool 	symphony = 1;
-#else
-static bool 	symphony;
-#endif
-#ifdef BROKEN_BUS_CLOCK
-static bool	broken_bus_clock = 1;
-#else
-static bool	broken_bus_clock;
-#endif
-
-static struct address_info cfg;
-static struct address_info cfg2;
-
-char            pas_model = 0;
-static char    *pas_model_names[] = {
-	"", 
-	"Pro AudioSpectrum+", 
-	"CDPC", 
-	"Pro AudioSpectrum 16", 
-	"Pro AudioSpectrum 16D"
-};
-
-/*
- * pas_read() and pas_write() are equivalents of inb and outb 
- * These routines perform the I/O address translation required
- * to support other than the default base address
- */
-
-unsigned char pas_read(int ioaddr)
-{
-	return inb(ioaddr + pas_translate_code);
-}
-
-void pas_write(unsigned char data, int ioaddr)
-{
-	outb((data), ioaddr + pas_translate_code);
-}
-
-/******************* Begin of the Interrupt Handler ********************/
-
-static irqreturn_t pasintr(int irq, void *dev_id)
-{
-	int             status;
-
-	status = pas_read(0x0B89);
-	pas_write(status, 0x0B89);	/* Clear interrupt */
-
-	if (status & 0x08)
-	{
-		  pas_pcm_interrupt(status, 1);
-		  status &= ~0x08;
-	}
-	if (status & 0x10)
-	{
-		  pas_midi_interrupt();
-		  status &= ~0x10;
-	}
-	return IRQ_HANDLED;
-}
-
-int pas_set_intr(int mask)
-{
-	if (!mask)
-		return 0;
-
-	pas_intr_mask |= mask;
-
-	pas_write(pas_intr_mask, 0x0B8B);
-	return 0;
-}
-
-int pas_remove_intr(int mask)
-{
-	if (!mask)
-		return 0;
-
-	pas_intr_mask &= ~mask;
-	pas_write(pas_intr_mask, 0x0B8B);
-
-	return 0;
-}
-
-/******************* End of the Interrupt handler **********************/
-
-/******************* Begin of the Initialization Code ******************/
-
-static int __init config_pas_hw(struct address_info *hw_config)
-{
-	char            ok = 1;
-	unsigned        int_ptrs;	/* scsi/sound interrupt pointers */
-
-	pas_irq = hw_config->irq;
-
-	pas_write(0x00, 0x0B8B);
-	pas_write(0x36, 0x138B);
-	pas_write(0x36, 0x1388);
-	pas_write(0, 0x1388);
-	pas_write(0x74, 0x138B);
-	pas_write(0x74, 0x1389);
-	pas_write(0, 0x1389);
-
-	pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
-	pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
-	pas_write(0x01 | 0x02 | 0x04 | 0x10	/*
-						 * |
-						 * 0x80
-						 */ , 0xB88);
-
-	pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
-
-	if (pas_irq < 0 || pas_irq > 15)
-	{
-		printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
-		hw_config->irq=-1;
-		ok = 0;
-	}
-	else
-	{
-		int_ptrs = pas_read(0xF38A);
-		int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
-		pas_write(int_ptrs, 0xF38A);
-		if (!irq_bits[pas_irq])
-		{
-			printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
-			hw_config->irq=-1;
-			ok = 0;
-		}
-		else
-		{
-			if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
-				printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
-				hw_config->irq=-1;
-				ok = 0;
-			}
-		}
-	}
-
-	if (hw_config->dma < 0 || hw_config->dma > 7)
-	{
-		printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
-		hw_config->dma=-1;
-		ok = 0;
-	}
-	else
-	{
-		pas_write(dma_bits[hw_config->dma], 0xF389);
-		if (!dma_bits[hw_config->dma])
-		{
-			printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
-			hw_config->dma=-1;
-			ok = 0;
-		}
-		else
-		{
-			if (sound_alloc_dma(hw_config->dma, "PAS16"))
-			{
-				printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
-				hw_config->dma=-1;
-				ok = 0;
-			}
-		}
-	}
-
-	/*
-	 * This fixes the timing problems of the PAS due to the Symphony chipset
-	 * as per Media Vision.  Only define this if your PAS doesn't work correctly.
-	 */
-
-	if(symphony)
-	{
-		outb((0x05), 0xa8);
-		outb((0x60), 0xa9);
-	}
-
-	if(broken_bus_clock)
-		pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
-	else
-		/*
-		 * pas_write(0x01, 0x8388);
-		 */
-		pas_write(0x01 | 0x10 | 0x20, 0x8388);
-
-	pas_write(0x18, 0x838A);	/* ??? */
-	pas_write(0x20 | 0x01, 0x0B8A);		/* Mute off, filter = 17.897 kHz */
-	pas_write(8, 0xBF8A);
-
-	mix_write(0x80 | 5, 0x078B);
-	mix_write(5, 0x078B);
-
-	{
-		struct address_info *sb_config;
-
-		sb_config = &cfg2;
-		if (sb_config->io_base)
-		{
-			unsigned char   irq_dma;
-
-			/*
-			 * Turn on Sound Blaster compatibility
-			 * bit 1 = SB emulation
-			 * bit 0 = MPU401 emulation (CDPC only :-( )
-			 */
-			
-			pas_write(0x02, 0xF788);
-
-			/*
-			 * "Emulation address"
-			 */
-			
-			pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
-			pas_sb_base = sb_config->io_base;
-
-			if (!sb_dma_bits[sb_config->dma])
-				printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
-
-			if (!sb_irq_bits[sb_config->irq])
-				printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
-
-			irq_dma = sb_dma_bits[sb_config->dma] |
-				sb_irq_bits[sb_config->irq];
-
-			pas_write(irq_dma, 0xFB8A);
-		}
-		else
-			pas_write(0x00, 0xF788);
-	}
-
-	if (!ok)
-		printk(KERN_WARNING "PAS16: Driver not enabled\n");
-
-	return ok;
-}
-
-static int __init detect_pas_hw(struct address_info *hw_config)
-{
-	unsigned char   board_id, foo;
-
-	/*
-	 * WARNING: Setting an option like W:1 or so that disables warm boot reset
-	 * of the card will screw up this detect code something fierce. Adding code
-	 * to handle this means possibly interfering with other cards on the bus if
-	 * you have something on base port 0x388. SO be forewarned.
-	 */
-
-	outb((0xBC), 0x9A01);	/* Activate first board */
-	outb((hw_config->io_base >> 2), 0x9A01);	/* Set base address */
-	pas_translate_code = hw_config->io_base - 0x388;
-	pas_write(1, 0xBF88);	/* Select one wait states */
-
-	board_id = pas_read(0x0B8B);
-
-	if (board_id == 0xff)
-		return 0;
-
-	/*
-	 * We probably have a PAS-series board, now check for a PAS16-series board
-	 * by trying to change the board revision bits. PAS16-series hardware won't
-	 * let you do this - the bits are read-only.
-	 */
-
-	foo = board_id ^ 0xe0;
-
-	pas_write(foo, 0x0B8B);
-	foo = pas_read(0x0B8B);
-	pas_write(board_id, 0x0B8B);
-
-	if (board_id != foo)
-		return 0;
-
-	pas_model = pas_read(0xFF88);
-
-	return pas_model;
-}
-
-static void __init attach_pas_card(struct address_info *hw_config)
-{
-	pas_irq = hw_config->irq;
-
-	if (detect_pas_hw(hw_config))
-	{
-
-		if ((pas_model = pas_read(0xFF88)))
-		{
-			char            temp[100];
-
-			if (pas_model < 0 ||
-			    pas_model >= ARRAY_SIZE(pas_model_names)) {
-				printk(KERN_ERR "pas2 unrecognized model.\n");
-				return;
-			}
-			sprintf(temp,
-			    "%s rev %d", pas_model_names[(int) pas_model],
-				    pas_read(0x2789));
-			conf_printf(temp, hw_config);
-		}
-		if (config_pas_hw(hw_config))
-		{
-			pas_pcm_init(hw_config);
-			pas_midi_init();
-			pas_init_mixer();
-		}
-	}
-}
-
-static inline int __init probe_pas(struct address_info *hw_config)
-{
-	return detect_pas_hw(hw_config);
-}
-
-static void __exit unload_pas(struct address_info *hw_config)
-{
-	extern int pas_audiodev;
-	extern int pas2_mididev;
-
-	if (hw_config->dma>0)
-		sound_free_dma(hw_config->dma);
-	if (hw_config->irq>0)
-		free_irq(hw_config->irq, hw_config);
-
-	if(pas_audiodev!=-1)
-		sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
-	if(pas2_mididev!=-1)
-	        sound_unload_mididev(pas2_mididev);
-	if(pas_audiodev!=-1)
-		sound_unload_audiodev(pas_audiodev);
-}
-
-static int __initdata io	= -1;
-static int __initdata irq	= -1;
-static int __initdata dma	= -1;
-static int __initdata dma16	= -1;	/* Set this for modules that need it */
-
-static int __initdata sb_io	= 0;
-static int __initdata sb_irq	= -1;
-static int __initdata sb_dma	= -1;
-static int __initdata sb_dma16	= -1;
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-module_param_hw(dma, int, dma, 0);
-module_param_hw(dma16, int, dma, 0);
-
-module_param_hw(sb_io, int, ioport, 0);
-module_param_hw(sb_irq, int, irq, 0);
-module_param_hw(sb_dma, int, dma, 0);
-module_param_hw(sb_dma16, int, dma, 0);
-
-module_param(joystick, bool, 0);
-module_param(symphony, bool, 0);
-module_param(broken_bus_clock, bool, 0);
-
-MODULE_LICENSE("GPL");
-
-static int __init init_pas2(void)
-{
-	printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma16;
-
-	cfg2.io_base = sb_io;
-	cfg2.irq = sb_irq;
-	cfg2.dma = sb_dma;
-	cfg2.dma2 = sb_dma16;
-
-	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
-		printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
-		return -EINVAL;
-	}
-
-	if (!probe_pas(&cfg))
-		return -ENODEV;
-	attach_pas_card(&cfg);
-
-	return 0;
-}
-
-static void __exit cleanup_pas2(void)
-{
-	unload_pas(&cfg);
-}
-
-module_init(init_pas2);
-module_exit(cleanup_pas2);
-
-#ifndef MODULE
-static int __init setup_pas2(char *str)
-{
-	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
-	int ints[9];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma16	= ints[4];
-
-	sb_io	= ints[5];
-	sb_irq	= ints[6];
-	sb_dma	= ints[7];
-	sb_dma16 = ints[8];
-
-	return 1;
-}
-
-__setup("pas2=", setup_pas2);
-#endif
diff --git a/sound/oss/pas2_midi.c b/sound/oss/pas2_midi.c
deleted file mode 100644
index 1122d10a20c3..000000000000
--- a/sound/oss/pas2_midi.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * sound/oss/pas2_midi.c
- *
- * The low level driver for the PAS Midi Interface.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Bartlomiej Zolnierkiewicz	: Added __init to pas_init_mixer()
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "pas2.h"
-
-extern spinlock_t pas_lock;
-
-static int      midi_busy, input_opened;
-static int      my_dev;
-
-int pas2_mididev=-1;
-
-static unsigned char tmp_queue[256];
-static volatile int qlen;
-static volatile unsigned char qhead, qtail;
-
-static void     (*midi_input_intr) (int dev, unsigned char data);
-
-static int pas_midi_open(int dev, int mode,
-	      void            (*input) (int dev, unsigned char data),
-	      void            (*output) (int dev)
-)
-{
-	int             err;
-	unsigned long   flags;
-	unsigned char   ctrl;
-
-
-	if (midi_busy)
-		return -EBUSY;
-
-	/*
-	 * Reset input and output FIFO pointers
-	 */
-	pas_write(0x20 | 0x40,
-		  0x178b);
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	if ((err = pas_set_intr(0x10)) < 0)
-	{
-		spin_unlock_irqrestore(&pas_lock, flags);
-		return err;
-	}
-	/*
-	 * Enable input available and output FIFO empty interrupts
-	 */
-
-	ctrl = 0;
-	input_opened = 0;
-	midi_input_intr = input;
-
-	if (mode == OPEN_READ || mode == OPEN_READWRITE)
-	{
-		ctrl |= 0x04;	/* Enable input */
-		input_opened = 1;
-	}
-	if (mode == OPEN_WRITE || mode == OPEN_READWRITE)
-	{
-		ctrl |= 0x08 | 0x10;	/* Enable output */
-	}
-	pas_write(ctrl, 0x178b);
-
-	/*
-	 * Acknowledge any pending interrupts
-	 */
-
-	pas_write(0xff, 0x1B88);
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-
-	midi_busy = 1;
-	qlen = qhead = qtail = 0;
-	return 0;
-}
-
-static void pas_midi_close(int dev)
-{
-
-	/*
-	 * Reset FIFO pointers, disable intrs
-	 */
-	pas_write(0x20 | 0x40, 0x178b);
-
-	pas_remove_intr(0x10);
-	midi_busy = 0;
-}
-
-static int dump_to_midi(unsigned char midi_byte)
-{
-	int fifo_space, x;
-
-	fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f;
-
-	/*
-	 * The MIDI FIFO space register and it's documentation is nonunderstandable.
-	 * There seem to be no way to differentiate between buffer full and buffer
-	 * empty situations. For this reason we don't never write the buffer
-	 * completely full. In this way we can assume that 0 (or is it 15)
-	 * means that the buffer is empty.
-	 */
-
-	if (fifo_space < 2 && fifo_space != 0)	/* Full (almost) */
-		return 0;	/* Ask upper layers to retry after some time */
-
-	pas_write(midi_byte, 0x178A);
-
-	return 1;
-}
-
-static int pas_midi_out(int dev, unsigned char midi_byte)
-{
-
-	unsigned long flags;
-
-	/*
-	 * Drain the local queue first
-	 */
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	while (qlen && dump_to_midi(tmp_queue[qhead]))
-	{
-		qlen--;
-		qhead++;
-	}
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-
-	/*
-	 *	Output the byte if the local queue is empty.
-	 */
-
-	if (!qlen)
-		if (dump_to_midi(midi_byte))
-			return 1;
-
-	/*
-	 *	Put to the local queue
-	 */
-
-	if (qlen >= 256)
-		return 0;	/* Local queue full */
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	tmp_queue[qtail] = midi_byte;
-	qlen++;
-	qtail++;
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-
-	return 1;
-}
-
-static int pas_midi_start_read(int dev)
-{
-	return 0;
-}
-
-static int pas_midi_end_read(int dev)
-{
-	return 0;
-}
-
-static void pas_midi_kick(int dev)
-{
-}
-
-static int pas_buffer_status(int dev)
-{
-	return qlen;
-}
-
-#define MIDI_SYNTH_NAME	"Pro Audio Spectrum Midi"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-#include "midi_synth.h"
-
-static struct midi_operations pas_midi_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= pas_midi_open,
-	.close		= pas_midi_close,
-	.outputc	= pas_midi_out,
-	.start_read	= pas_midi_start_read,
-	.end_read	= pas_midi_end_read,
-	.kick		= pas_midi_kick,
-	.buffer_status	= pas_buffer_status,
-};
-
-void __init pas_midi_init(void)
-{
-	int dev = sound_alloc_mididev();
-
-	if (dev == -1)
-	{
-		printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n");
-		return;
-	}
-	std_midi_synth.midi_dev = my_dev = dev;
-	midi_devs[dev] = &pas_midi_operations;
-	pas2_mididev = dev;
-	sequencer_init();
-}
-
-void pas_midi_interrupt(void)
-{
-	unsigned char   stat;
-	int             i, incount;
-
-	stat = pas_read(0x1B88);
-
-	if (stat & 0x04)	/* Input data available */
-	{
-		incount = pas_read(0x1B89) & 0x0f;	/* Input FIFO size */
-		if (!incount)
-			incount = 16;
-
-		for (i = 0; i < incount; i++)
-			if (input_opened)
-			{
-				midi_input_intr(my_dev, pas_read(0x178A));
-			} else
-				pas_read(0x178A);	/* Flush */
-	}
-	if (stat & (0x08 | 0x10))
-	{
-		spin_lock(&pas_lock);/* called in irq context */
-
-		while (qlen && dump_to_midi(tmp_queue[qhead]))
-		{
-			qlen--;
-			qhead++;
-		}
-
-		spin_unlock(&pas_lock);
-	}
-	if (stat & 0x40)
-	{
-		printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat);
-	}
-	pas_write(stat, 0x1B88);	/* Acknowledge interrupts */
-}
diff --git a/sound/oss/pas2_mixer.c b/sound/oss/pas2_mixer.c
deleted file mode 100644
index 50b5bd501247..000000000000
--- a/sound/oss/pas2_mixer.c
+++ /dev/null
@@ -1,327 +0,0 @@
-
-/*
- * sound/oss/pas2_mixer.c
- *
- * Mixer routines for the Pro Audio Spectrum cards.
- */
-
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Bartlomiej Zolnierkiewicz : added __init to pas_init_mixer()
- */
-#include <linux/init.h>
-#include "sound_config.h"
-
-#include "pas2.h"
-
-extern int      pas_translate_code;
-extern char     pas_model;
-extern int     *pas_osp;
-extern int      pas_audiodev;
-
-static int      rec_devices = (SOUND_MASK_MIC);		/* Default recording source */
-static int      mode_control;
-
-#define POSSIBLE_RECORDING_DEVICES	(SOUND_MASK_SYNTH | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD | SOUND_MASK_ALTPCM)
-
-#define SUPPORTED_MIXER_DEVICES		(SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD | SOUND_MASK_ALTPCM | SOUND_MASK_IMIX | \
-					 SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_RECLEV)
-
-static int     *levels;
-
-static int      default_levels[32] =
-{
-	0x3232,			/* Master Volume */
-	0x3232,			/* Bass */
-	0x3232,			/* Treble */
-	0x5050,			/* FM */
-	0x4b4b,			/* PCM */
-	0x3232,			/* PC Speaker */
-	0x4b4b,			/* Ext Line */
-	0x4b4b,			/* Mic */
-	0x4b4b,			/* CD */
-	0x6464,			/* Recording monitor */
-	0x4b4b,			/* SB PCM */
-	0x6464			/* Recording level */
-};
-
-void
-mix_write(unsigned char data, int ioaddr)
-{
-	/*
-	 * The Revision D cards have a problem with their MVA508 interface. The
-	 * kludge-o-rama fix is to make a 16-bit quantity with identical LSB and
-	 * MSBs out of the output byte and to do a 16-bit out to the mixer port -
-	 * 1. We need to do this because it isn't timing problem but chip access
-	 * sequence problem.
-	 */
-
-	if (pas_model == 4)
-	  {
-		  outw(data | (data << 8), (ioaddr + pas_translate_code) - 1);
-		  outb((0x80), 0);
-	} else
-		pas_write(data, ioaddr);
-}
-
-static int
-mixer_output(int right_vol, int left_vol, int div, int bits,
-	     int mixer)		/* Input or output mixer */
-{
-	int             left = left_vol * div / 100;
-	int             right = right_vol * div / 100;
-
-
-	if (bits & 0x10)
-	  {
-		  left |= mixer;
-		  right |= mixer;
-	  }
-	if (bits == 0x03 || bits == 0x04)
-	  {
-		  mix_write(0x80 | bits, 0x078B);
-		  mix_write(left, 0x078B);
-		  right_vol = left_vol;
-	} else
-	  {
-		  mix_write(0x80 | 0x20 | bits, 0x078B);
-		  mix_write(left, 0x078B);
-		  mix_write(0x80 | 0x40 | bits, 0x078B);
-		  mix_write(right, 0x078B);
-	  }
-
-	return (left_vol | (right_vol << 8));
-}
-
-static void
-set_mode(int new_mode)
-{
-	mix_write(0x80 | 0x05, 0x078B);
-	mix_write(new_mode, 0x078B);
-
-	mode_control = new_mode;
-}
-
-static int
-pas_mixer_set(int whichDev, unsigned int level)
-{
-	int             left, right, devmask, changed, i, mixer = 0;
-
-	left = level & 0x7f;
-	right = (level & 0x7f00) >> 8;
-
-	if (whichDev < SOUND_MIXER_NRDEVICES) {
-		if ((1 << whichDev) & rec_devices)
-			mixer = 0x20;
-		else
-			mixer = 0x00;
-	}
-
-	switch (whichDev)
-	  {
-	  case SOUND_MIXER_VOLUME:	/* Master volume (0-63) */
-		  levels[whichDev] = mixer_output(right, left, 63, 0x01, 0);
-		  break;
-
-		  /*
-		   * Note! Bass and Treble are mono devices. Will use just the left
-		   * channel.
-		   */
-	  case SOUND_MIXER_BASS:	/* Bass (0-12) */
-		  levels[whichDev] = mixer_output(right, left, 12, 0x03, 0);
-		  break;
-	  case SOUND_MIXER_TREBLE:	/* Treble (0-12) */
-		  levels[whichDev] = mixer_output(right, left, 12, 0x04, 0);
-		  break;
-
-	  case SOUND_MIXER_SYNTH:	/* Internal synthesizer (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x00, mixer);
-		  break;
-	  case SOUND_MIXER_PCM:	/* PAS PCM (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x05, mixer);
-		  break;
-	  case SOUND_MIXER_ALTPCM:	/* SB PCM (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x07, mixer);
-		  break;
-	  case SOUND_MIXER_SPEAKER:	/* PC speaker (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x06, mixer);
-		  break;
-	  case SOUND_MIXER_LINE:	/* External line (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x02, mixer);
-		  break;
-	  case SOUND_MIXER_CD:	/* CD (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x03, mixer);
-		  break;
-	  case SOUND_MIXER_MIC:	/* External microphone (0-31) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x04, mixer);
-		  break;
-	  case SOUND_MIXER_IMIX:	/* Recording monitor (0-31) (Output mixer only) */
-		  levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x01,
-						  0x00);
-		  break;
-	  case SOUND_MIXER_RECLEV:	/* Recording level (0-15) */
-		  levels[whichDev] = mixer_output(right, left, 15, 0x02, 0);
-		  break;
-
-
-	  case SOUND_MIXER_RECSRC:
-		  devmask = level & POSSIBLE_RECORDING_DEVICES;
-
-		  changed = devmask ^ rec_devices;
-		  rec_devices = devmask;
-
-		  for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-			  if (changed & (1 << i))
-			    {
-				    pas_mixer_set(i, levels[i]);
-			    }
-		  return rec_devices;
-		  break;
-
-	  default:
-		  return -EINVAL;
-	  }
-
-	return (levels[whichDev]);
-}
-
-/*****/
-
-static void
-pas_mixer_reset(void)
-{
-	int             foo;
-
-	for (foo = 0; foo < SOUND_MIXER_NRDEVICES; foo++)
-		pas_mixer_set(foo, levels[foo]);
-
-	set_mode(0x04 | 0x01);
-}
-
-static int pas_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	int level,v ;
-	int __user *p = (int __user *)arg;
-
-	if (cmd == SOUND_MIXER_PRIVATE1) { /* Set loudness bit */
-		if (get_user(level, p))
-			return -EFAULT;
-		if (level == -1)  /* Return current settings */
-			level = (mode_control & 0x04);
-		else {
-			mode_control &= ~0x04;
-			if (level)
-				mode_control |= 0x04;
-			set_mode(mode_control);
-		}
-		level = !!level;
-		return put_user(level, p);
-	}
-	if (cmd == SOUND_MIXER_PRIVATE2) { /* Set enhance bit */
-		if (get_user(level, p))
-			return -EFAULT;
-		if (level == -1) { /* Return current settings */
-			if (!(mode_control & 0x03))
-				level = 0;
-			else
-				level = ((mode_control & 0x03) + 1) * 20;
-		} else {
-			int i = 0;
-			
-			level &= 0x7f;
-			if (level)
-				i = (level / 20) - 1;
-			mode_control &= ~0x03;
-			mode_control |= i & 0x03;
-			set_mode(mode_control);
-			if (i)
-				i = (i + 1) * 20;
-			level = i;
-		}
-		return put_user(level, p);
-	}
-	if (cmd == SOUND_MIXER_PRIVATE3) { /* Set mute bit */
-		if (get_user(level, p))
-			return -EFAULT;
-		if (level == -1)	/* Return current settings */
-			level = !(pas_read(0x0B8A) & 0x20);
-		else {
-			if (level)
-				pas_write(pas_read(0x0B8A) & (~0x20), 0x0B8A);
-			else
-				pas_write(pas_read(0x0B8A) | 0x20, 0x0B8A);
-
-			level = !(pas_read(0x0B8A) & 0x20);
-		}
-		return put_user(level, p);
-	}
-	if (((cmd >> 8) & 0xff) == 'M') {
-		if (get_user(v, p))
-			return -EFAULT;
-		if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
-			v = pas_mixer_set(cmd & 0xff, v);
-		} else {
-			switch (cmd & 0xff) {
-			case SOUND_MIXER_RECSRC:
-				v = rec_devices;
-				break;
-				
-			case SOUND_MIXER_STEREODEVS:
-				v = SUPPORTED_MIXER_DEVICES & ~(SOUND_MASK_BASS | SOUND_MASK_TREBLE);
-				break;
-				
-			case SOUND_MIXER_DEVMASK:
-				v = SUPPORTED_MIXER_DEVICES;
-				break;
-				
-			case SOUND_MIXER_RECMASK:
-				v = POSSIBLE_RECORDING_DEVICES & SUPPORTED_MIXER_DEVICES;
-				break;
-				
-			case SOUND_MIXER_CAPS:
-				v = 0;	/* No special capabilities */
-				break;
-				
-			default:
-				v = levels[cmd & 0xff];
-				break;
-			}
-		}
-		return put_user(v, p);
-	}
-	return -EINVAL;
-}
-
-static struct mixer_operations pas_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "PAS16",
-	.name	= "Pro Audio Spectrum 16",
-	.ioctl	= pas_mixer_ioctl
-};
-
-int __init
-pas_init_mixer(void)
-{
-	int             d;
-
-	levels = load_mixer_volumes("PAS16_1", default_levels, 1);
-
-	pas_mixer_reset();
-
-	if ((d = sound_alloc_mixerdev()) != -1)
-	  {
-		  audio_devs[pas_audiodev]->mixer_dev = d;
-		  mixer_devs[d] = &pas_mixer_operations;
-	  }
-	return 1;
-}
diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c
deleted file mode 100644
index 474803b52f7d..000000000000
--- a/sound/oss/pas2_pcm.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * pas2_pcm.c Audio routines for PAS16
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Alan Cox	   : Swatted a double allocation of device bug. Made a few
- *		     more things module options.
- * Bartlomiej Zolnierkiewicz : Added __init to pas_pcm_init()
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/timex.h>
-#include "sound_config.h"
-
-#include "pas2.h"
-
-#define PAS_PCM_INTRBITS (0x08)
-/*
- * Sample buffer timer interrupt enable
- */
-
-#define PCM_NON	0
-#define PCM_DAC	1
-#define PCM_ADC	2
-
-static unsigned long pcm_speed; 	/* sampling rate */
-static unsigned char pcm_channels = 1;	/* channels (1 or 2) */
-static unsigned char pcm_bits = 8;	/* bits/sample (8 or 16) */
-static unsigned char pcm_filter;	/* filter FLAG */
-static unsigned char pcm_mode = PCM_NON;
-static unsigned long pcm_count;
-static unsigned short pcm_bitsok = 8;	/* mask of OK bits */
-static int      pcm_busy;
-int             pas_audiodev = -1;
-static int      open_mode;
-
-extern spinlock_t pas_lock;
-
-static int pcm_set_speed(int arg)
-{
-	int foo, tmp;
-	unsigned long flags;
-
-	if (arg == 0)
-		return pcm_speed;
-
-	if (arg > 44100)
-		arg = 44100;
-	if (arg < 5000)
-		arg = 5000;
-
-	if (pcm_channels & 2)
-	{
-		foo = ((PIT_TICK_RATE / 2) + (arg / 2)) / arg;
-		arg = ((PIT_TICK_RATE / 2) + (foo / 2)) / foo;
-	}
-	else
-	{
-		foo = (PIT_TICK_RATE + (arg / 2)) / arg;
-		arg = (PIT_TICK_RATE + (foo / 2)) / foo;
-	}
-
-	pcm_speed = arg;
-
-	tmp = pas_read(0x0B8A);
-
-	/*
-	 * Set anti-aliasing filters according to sample rate. You really *NEED*
-	 * to enable this feature for all normal recording unless you want to
-	 * experiment with aliasing effects.
-	 * These filters apply to the selected "recording" source.
-	 * I (pfw) don't know the encoding of these 5 bits. The values shown
-	 * come from the SDK found on ftp.uwp.edu:/pub/msdos/proaudio/.
-	 *
-	 * I cleared bit 5 of these values, since that bit controls the master
-	 * mute flag. (Olav Wölfelschneider)
-	 *
-	 */
-#if !defined NO_AUTO_FILTER_SET
-	tmp &= 0xe0;
-	if (pcm_speed >= 2 * 17897)
-		tmp |= 0x01;
-	else if (pcm_speed >= 2 * 15909)
-		tmp |= 0x02;
-	else if (pcm_speed >= 2 * 11931)
-		tmp |= 0x09;
-	else if (pcm_speed >= 2 * 8948)
-		tmp |= 0x11;
-	else if (pcm_speed >= 2 * 5965)
-		tmp |= 0x19;
-	else if (pcm_speed >= 2 * 2982)
-		tmp |= 0x04;
-	pcm_filter = tmp;
-#endif
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	pas_write(tmp & ~(0x40 | 0x80), 0x0B8A);
-	pas_write(0x00 | 0x30 | 0x04, 0x138B);
-	pas_write(foo & 0xff, 0x1388);
-	pas_write((foo >> 8) & 0xff, 0x1388);
-	pas_write(tmp, 0x0B8A);
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-
-	return pcm_speed;
-}
-
-static int pcm_set_channels(int arg)
-{
-
-	if ((arg != 1) && (arg != 2))
-		return pcm_channels;
-
-	if (arg != pcm_channels)
-	{
-		pas_write(pas_read(0xF8A) ^ 0x20, 0xF8A);
-
-		pcm_channels = arg;
-		pcm_set_speed(pcm_speed);	/* The speed must be reinitialized */
-	}
-	return pcm_channels;
-}
-
-static int pcm_set_bits(int arg)
-{
-	if (arg == 0)
-		return pcm_bits;
-
-	if ((arg & pcm_bitsok) != arg)
-		return pcm_bits;
-
-	if (arg != pcm_bits)
-	{
-		pas_write(pas_read(0x8389) ^ 0x04, 0x8389);
-
-		pcm_bits = arg;
-	}
-	return pcm_bits;
-}
-
-static int pas_audio_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	int val, ret;
-	int __user *p = arg;
-
-	switch (cmd) 
-	{
-	case SOUND_PCM_WRITE_RATE:
-		if (get_user(val, p)) 
-			return -EFAULT;
-		ret = pcm_set_speed(val);
-		break;
-
-	case SOUND_PCM_READ_RATE:
-		ret = pcm_speed;
-		break;
-		
-	case SNDCTL_DSP_STEREO:
-		if (get_user(val, p)) 
-			return -EFAULT;
-		ret = pcm_set_channels(val + 1) - 1;
-		break;
-
-	case SOUND_PCM_WRITE_CHANNELS:
-		if (get_user(val, p)) 
-			return -EFAULT;
-		ret = pcm_set_channels(val);
-		break;
-
-	case SOUND_PCM_READ_CHANNELS:
-		ret = pcm_channels;
-		break;
-
-	case SNDCTL_DSP_SETFMT:
-		if (get_user(val, p))
-			return -EFAULT;
-		ret = pcm_set_bits(val);
-		break;
-		
-	case SOUND_PCM_READ_BITS:
-		ret = pcm_bits;
-		break;
-  
-	default:
-		return -EINVAL;
-	}
-	return put_user(ret, p);
-}
-
-static void pas_audio_reset(int dev)
-{
-	pas_write(pas_read(0xF8A) & ~0x40, 0xF8A);	/* Disable PCM */
-}
-
-static int pas_audio_open(int dev, int mode)
-{
-	int             err;
-	unsigned long   flags;
-
-	spin_lock_irqsave(&pas_lock, flags);
-	if (pcm_busy)
-	{
-		spin_unlock_irqrestore(&pas_lock, flags);
-		return -EBUSY;
-	}
-	pcm_busy = 1;
-	spin_unlock_irqrestore(&pas_lock, flags);
-
-	if ((err = pas_set_intr(PAS_PCM_INTRBITS)) < 0)
-		return err;
-
-
-	pcm_count = 0;
-	open_mode = mode;
-
-	return 0;
-}
-
-static void pas_audio_close(int dev)
-{
-	unsigned long   flags;
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	pas_audio_reset(dev);
-	pas_remove_intr(PAS_PCM_INTRBITS);
-	pcm_mode = PCM_NON;
-
-	pcm_busy = 0;
-	spin_unlock_irqrestore(&pas_lock, flags);
-}
-
-static void pas_audio_output_block(int dev, unsigned long buf, int count,
-		       int intrflag)
-{
-	unsigned long   flags, cnt;
-
-	cnt = count;
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		cnt >>= 1;
-
-	if (audio_devs[dev]->flags & DMA_AUTOMODE &&
-	    intrflag &&
-	    cnt == pcm_count)
-		return;
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	pas_write(pas_read(0xF8A) & ~0x40,
-		  0xF8A);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-
-	if (count != pcm_count)
-	{
-		pas_write(pas_read(0x0B8A) & ~0x80, 0x0B8A);
-		pas_write(0x40 | 0x30 | 0x04, 0x138B);
-		pas_write(count & 0xff, 0x1389);
-		pas_write((count >> 8) & 0xff, 0x1389);
-		pas_write(pas_read(0x0B8A) | 0x80, 0x0B8A);
-
-		pcm_count = count;
-	}
-	pas_write(pas_read(0x0B8A) | 0x80 | 0x40, 0x0B8A);
-#ifdef NO_TRIGGER
-	pas_write(pas_read(0xF8A) | 0x40 | 0x10, 0xF8A);
-#endif
-
-	pcm_mode = PCM_DAC;
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-}
-
-static void pas_audio_start_input(int dev, unsigned long buf, int count,
-		      int intrflag)
-{
-	unsigned long   flags;
-	int             cnt;
-
-	cnt = count;
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		cnt >>= 1;
-
-	if (audio_devs[pas_audiodev]->flags & DMA_AUTOMODE &&
-	    intrflag &&
-	    cnt == pcm_count)
-		return;
-
-	spin_lock_irqsave(&pas_lock, flags);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-
-	if (count != pcm_count)
-	{
-		pas_write(pas_read(0x0B8A) & ~0x80, 0x0B8A);
-		pas_write(0x40 | 0x30 | 0x04, 0x138B);
-		pas_write(count & 0xff, 0x1389);
-		pas_write((count >> 8) & 0xff, 0x1389);
-		pas_write(pas_read(0x0B8A) | 0x80, 0x0B8A);
-
-		pcm_count = count;
-	}
-	pas_write(pas_read(0x0B8A) | 0x80 | 0x40, 0x0B8A);
-#ifdef NO_TRIGGER
-	pas_write((pas_read(0xF8A) | 0x40) & ~0x10, 0xF8A);
-#endif
-
-	pcm_mode = PCM_ADC;
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-}
-
-#ifndef NO_TRIGGER
-static void pas_audio_trigger(int dev, int state)
-{
-	unsigned long   flags;
-
-	spin_lock_irqsave(&pas_lock, flags);
-	state &= open_mode;
-
-	if (state & PCM_ENABLE_OUTPUT)
-		pas_write(pas_read(0xF8A) | 0x40 | 0x10, 0xF8A);
-	else if (state & PCM_ENABLE_INPUT)
-		pas_write((pas_read(0xF8A) | 0x40) & ~0x10, 0xF8A);
-	else
-		pas_write(pas_read(0xF8A) & ~0x40, 0xF8A);
-
-	spin_unlock_irqrestore(&pas_lock, flags);
-}
-#endif
-
-static int pas_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	pas_audio_reset(dev);
-	return 0;
-}
-
-static int pas_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	pas_audio_reset(dev);
-	return 0;
-}
-
-static struct audio_driver pas_audio_driver =
-{
-	.owner			= THIS_MODULE,
-	.open			= pas_audio_open,
-	.close			= pas_audio_close,
-	.output_block		= pas_audio_output_block,
-	.start_input		= pas_audio_start_input,
-	.ioctl			= pas_audio_ioctl,
-	.prepare_for_input	= pas_audio_prepare_for_input,
-	.prepare_for_output	= pas_audio_prepare_for_output,
-	.halt_io		= pas_audio_reset,
-	.trigger		= pas_audio_trigger
-};
-
-void __init pas_pcm_init(struct address_info *hw_config)
-{
-	pcm_bitsok = 8;
-	if (pas_read(0xEF8B) & 0x08)
-		pcm_bitsok |= 16;
-
-	pcm_set_speed(DSP_DEFAULT_SPEED);
-
-	if ((pas_audiodev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
-					"Pro Audio Spectrum",
-					&pas_audio_driver,
-					sizeof(struct audio_driver),
-					DMA_AUTOMODE,
-					AFMT_U8 | AFMT_S16_LE,
-					NULL,
-					hw_config->dma,
-					hw_config->dma)) < 0)
-		printk(KERN_WARNING "PAS16: Too many PCM devices available\n");
-}
-
-void pas_pcm_interrupt(unsigned char status, int cause)
-{
-	if (cause == 1)
-	{
-		/*
-		 * Halt the PCM first. Otherwise we don't have time to start a new
-		 * block before the PCM chip proceeds to the next sample
-		 */
-
-		if (!(audio_devs[pas_audiodev]->flags & DMA_AUTOMODE))
-			pas_write(pas_read(0xF8A) & ~0x40, 0xF8A);
-
-		switch (pcm_mode)
-		{
-			case PCM_DAC:
-				DMAbuf_outputintr(pas_audiodev, 1);
-				break;
-
-			case PCM_ADC:
-				DMAbuf_inputintr(pas_audiodev);
-				break;
-
-			default:
-				printk(KERN_WARNING "PAS: Unexpected PCM interrupt\n");
-		}
-	}
-}
diff --git a/sound/oss/pss.c b/sound/oss/pss.c
deleted file mode 100644
index 33c3a442e162..000000000000
--- a/sound/oss/pss.c
+++ /dev/null
@@ -1,1270 +0,0 @@
-/*
- * sound/oss/pss.c
- *
- * The low level driver for the Personal Sound System (ECHO ESC614).
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer	ioctl code reworked (vmalloc/vfree removed)
- * Alan Cox		modularisation, clean up.
- *
- * 98-02-21: Vladimir Michl <vladimir.michl@upol.cz>
- *          Added mixer device for Beethoven ADSP-16 (master volume,
- *	    bass, treble, synth), only for speakers.
- *          Fixed bug in pss_write (exchange parameters)
- *          Fixed config port of SB
- *          Requested two regions for PSS (PSS mixer, PSS config)
- *          Modified pss_download_boot
- *          To probe_pss_mss added test for initialize AD1848
- * 98-05-28: Vladimir Michl <vladimir.michl@upol.cz>
- *          Fixed computation of mixer volumes
- * 04-05-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
- *          Added code that allows the user to enable his cdrom and/or 
- *          joystick through the module parameters pss_cdrom_port and 
- *          pss_enable_joystick.  pss_cdrom_port takes a port address as its
- *          argument.  pss_enable_joystick takes either a 0 or a non-0 as its
- *          argument.
- * 04-06-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
- *          Separated some code into new functions for easier reuse.  
- *          Cleaned up and streamlined new code.  Added code to allow a user 
- *          to only use this driver for enabling non-sound components 
- *          through the new module parameter pss_no_sound (flag).  Added 
- *          code that would allow a user to decide whether the driver should 
- *          reset the configured hardware settings for the PSS board through 
- *          the module parameter pss_keep_settings (flag).   This flag will 
- *          allow a user to free up resources in use by this card if needbe, 
- *          furthermore it allows him to use this driver to just enable the 
- *          emulations and then be unloaded as it is no longer needed.  Both 
- *          new settings are only available to this driver if compiled as a 
- *          module.  The default settings of all new parameters are set to 
- *          load the driver as it did in previous versions.
- * 04-07-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
- *          Added module parameter pss_firmware to allow the user to tell 
- *          the driver where the firmware file is located.  The default 
- *          setting is the previous hardcoded setting "/etc/sound/pss_synth".
- * 00-03-03: Christoph Hellwig <chhellwig@infradead.org>
- *	    Adapted to module_init/module_exit
- * 11-10-2000: Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
- *	    Added __init to probe_pss(), attach_pss() and probe_pss_mpu()
- * 02-Jan-2001: Chris Rankin
- *          Specify that this module owns the coprocessor
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-#include "sound_firmware.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-/*
- * PSS registers.
- */
-#define REG(x)	(devc->base+x)
-#define	PSS_DATA	0
-#define	PSS_STATUS	2
-#define PSS_CONTROL	2
-#define	PSS_ID		4
-#define	PSS_IRQACK	4
-#define	PSS_PIO		0x1a
-
-/*
- * Config registers
- */
-#define CONF_PSS	0x10
-#define CONF_WSS	0x12
-#define CONF_SB		0x14
-#define CONF_CDROM	0x16
-#define CONF_MIDI	0x18
-
-/*
- * Status bits.
- */
-#define PSS_FLAG3     0x0800
-#define PSS_FLAG2     0x0400
-#define PSS_FLAG1     0x1000
-#define PSS_FLAG0     0x0800
-#define PSS_WRITE_EMPTY  0x8000
-#define PSS_READ_FULL    0x4000
-
-/*
- * WSS registers
- */
-#define WSS_INDEX 4
-#define WSS_DATA 5
-
-/*
- * WSS status bits
- */
-#define WSS_INITIALIZING 0x80
-#define WSS_AUTOCALIBRATION 0x20
-
-#define NO_WSS_MIXER	-1
-
-#include "coproc.h"
-
-#include "pss_boot.h"
-
-/* If compiled into kernel, it enable or disable pss mixer */
-#ifdef CONFIG_PSS_MIXER
-static bool pss_mixer = 1;
-#else
-static bool pss_mixer;
-#endif
-
-
-struct pss_mixerdata {
-	unsigned int volume_l;
-	unsigned int volume_r;
-	unsigned int bass;
-	unsigned int treble;
-	unsigned int synth;
-};
-
-struct pss_confdata {
-	int             base;
-	int             irq;
-	int             dma;
-	int            *osp;
-	struct pss_mixerdata mixer;
-	int             ad_mixer_dev;
-};
-  
-static struct pss_confdata pss_data;
-static struct pss_confdata *devc = &pss_data;
-static DEFINE_SPINLOCK(lock);
-
-static int      pss_initialized;
-static int      nonstandard_microcode;
-static int	pss_cdrom_port = -1;	/* Parameter for the PSS cdrom port */
-static bool	pss_enable_joystick;    /* Parameter for enabling the joystick */
-static coproc_operations pss_coproc_operations;
-
-static void pss_write(struct pss_confdata *devc, int data)
-{
-	unsigned long i, limit;
-
-	limit = jiffies + HZ/10;	/* The timeout is 0.1 seconds */
-	/*
-	 * Note! the i<5000000 is an emergency exit. The dsp_command() is sometimes
-	 * called while interrupts are disabled. This means that the timer is
-	 * disabled also. However the timeout situation is a abnormal condition.
-	 * Normally the DSP should be ready to accept commands after just couple of
-	 * loops.
-	 */
-
-	for (i = 0; i < 5000000 && time_before(jiffies, limit); i++)
- 	{
- 		if (inw(REG(PSS_STATUS)) & PSS_WRITE_EMPTY)
- 		{
- 			outw(data, REG(PSS_DATA));
- 			return;
- 		}
- 	}
- 	printk(KERN_WARNING "PSS: DSP Command (%04x) Timeout.\n", data);
-}
-
-static int __init probe_pss(struct address_info *hw_config)
-{
-	unsigned short id;
-	int irq, dma;
-
-	devc->base = hw_config->io_base;
-	irq = devc->irq = hw_config->irq;
-	dma = devc->dma = hw_config->dma;
-	devc->osp = hw_config->osp;
-
-	if (devc->base != 0x220 && devc->base != 0x240)
-		if (devc->base != 0x230 && devc->base != 0x250)		/* Some cards use these */
-			return 0;
-
-	if (!request_region(devc->base, 0x10, "PSS mixer, SB emulation")) {
-		printk(KERN_ERR "PSS: I/O port conflict\n");
-		return 0;
-	}
-	id = inw(REG(PSS_ID));
-	if ((id >> 8) != 'E') {
-		printk(KERN_ERR "No PSS signature detected at 0x%x (0x%x)\n",  devc->base,  id); 
-		release_region(devc->base, 0x10);
-		return 0;
-	}
-	if (!request_region(devc->base + 0x10, 0x9, "PSS config")) {
-		printk(KERN_ERR "PSS: I/O port conflict\n");
-		release_region(devc->base, 0x10);
-		return 0;
-	}
-	return 1;
-}
-
-static int set_irq(struct pss_confdata *devc, int dev, int irq)
-{
-	static unsigned short irq_bits[16] =
-	{
-		0x0000, 0x0000, 0x0000, 0x0008,
-		0x0000, 0x0010, 0x0000, 0x0018,
-		0x0000, 0x0020, 0x0028, 0x0030,
-		0x0038, 0x0000, 0x0000, 0x0000
-	};
-
-	unsigned short  tmp, bits;
-
-	if (irq < 0 || irq > 15)
-		return 0;
-
-	tmp = inw(REG(dev)) & ~0x38;	/* Load confreg, mask IRQ bits out */
-
-	if ((bits = irq_bits[irq]) == 0 && irq != 0)
-	{
-		printk(KERN_ERR "PSS: Invalid IRQ %d\n", irq);
-		return 0;
-	}
-	outw(tmp | bits, REG(dev));
-	return 1;
-}
-
-static void set_io_base(struct pss_confdata *devc, int dev, int base)
-{
-	unsigned short  tmp = inw(REG(dev)) & 0x003f;
-	unsigned short  bits = (base & 0x0ffc) << 4;
-
-	outw(bits | tmp, REG(dev));
-}
-
-static int set_dma(struct pss_confdata *devc, int dev, int dma)
-{
-	static unsigned short dma_bits[8] =
-	{
-		0x0001, 0x0002, 0x0000, 0x0003,
-		0x0000, 0x0005, 0x0006, 0x0007
-	};
-
-	unsigned short  tmp, bits;
-
-	if (dma < 0 || dma > 7)
-		return 0;
-
-	tmp = inw(REG(dev)) & ~0x07;	/* Load confreg, mask DMA bits out */
-
-	if ((bits = dma_bits[dma]) == 0 && dma != 4)
-	{
-		  printk(KERN_ERR "PSS: Invalid DMA %d\n", dma);
-		  return 0;
-	}
-	outw(tmp | bits, REG(dev));
-	return 1;
-}
-
-static int pss_reset_dsp(struct pss_confdata *devc)
-{
-	unsigned long   i, limit = jiffies + HZ/10;
-
-	outw(0x2000, REG(PSS_CONTROL));
-	for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++)
-		inw(REG(PSS_CONTROL));
-	outw(0x0000, REG(PSS_CONTROL));
-	return 1;
-}
-
-static int pss_put_dspword(struct pss_confdata *devc, unsigned short word)
-{
-	int i, val;
-
-	for (i = 0; i < 327680; i++)
-	{
-		val = inw(REG(PSS_STATUS));
-		if (val & PSS_WRITE_EMPTY)
-		{
-			outw(word, REG(PSS_DATA));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int pss_get_dspword(struct pss_confdata *devc, unsigned short *word)
-{
-	int i, val;
-
-	for (i = 0; i < 327680; i++)
-	{
-		val = inw(REG(PSS_STATUS));
-		if (val & PSS_READ_FULL)
-		{
-			*word = inw(REG(PSS_DATA));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int pss_download_boot(struct pss_confdata *devc, unsigned char *block,
-			     int size, int flags)
-{
-	int i, val, count;
-	unsigned long limit;
-
-	if (flags & CPF_FIRST)
-	{
-/*_____ Warn DSP software that a boot is coming */
-		outw(0x00fe, REG(PSS_DATA));
-
-		limit = jiffies + HZ/10;
-		for (i = 0; i < 32768 && time_before(jiffies, limit); i++)
-			if (inw(REG(PSS_DATA)) == 0x5500)
-				break;
-
-		outw(*block++, REG(PSS_DATA));
-		pss_reset_dsp(devc);
-	}
-	count = 1;
-	while ((flags&CPF_LAST) || count<size )
-	{
-		int j;
-
-		for (j = 0; j < 327670; j++)
-		{
-/*_____ Wait for BG to appear */
-			if (inw(REG(PSS_STATUS)) & PSS_FLAG3)
-				break;
-		}
-
-		if (j == 327670)
-		{
-			/* It's ok we timed out when the file was empty */
-			if (count >= size && flags & CPF_LAST)
-				break;
-			else
-			{
-				printk("\n");
-				printk(KERN_ERR "PSS: Download timeout problems, byte %d=%d\n", count, size);
-				return 0;
-			}
-		}
-/*_____ Send the next byte */
-		if (count >= size) 
-		{
-			/* If not data in block send 0xffff */
-			outw (0xffff, REG (PSS_DATA));
-		}
-		else
-		{
-			/*_____ Send the next byte */
-			outw (*block++, REG (PSS_DATA));
-		}
-		count++;
-	}
-
-	if (flags & CPF_LAST)
-	{
-/*_____ Why */
-		outw(0, REG(PSS_DATA));
-
-		limit = jiffies + HZ/10;
-		for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++)
-			val = inw(REG(PSS_STATUS));
-
-		limit = jiffies + HZ/10;
-		for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++)
-		{
-			val = inw(REG(PSS_STATUS));
-			if (val & 0x4000)
-				break;
-		}
-
-		/* now read the version */
-		for (i = 0; i < 32000; i++)
-		{
-			val = inw(REG(PSS_STATUS));
-			if (val & PSS_READ_FULL)
-				break;
-		}
-		if (i == 32000)
-			return 0;
-
-		val = inw(REG(PSS_DATA));
-		/* printk( "<PSS: microcode version %d.%d loaded>",  val/16,  val % 16); */
-	}
-	return 1;
-}
-
-/* Mixer */
-static void set_master_volume(struct pss_confdata *devc, int left, int right)
-{
-	static unsigned char log_scale[101] =  {
-		0xdb, 0xe0, 0xe3, 0xe5, 0xe7, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xed, 0xee,
-		0xef, 0xef, 0xf0, 0xf0, 0xf1, 0xf1, 0xf2, 0xf2, 0xf2, 0xf3, 0xf3, 0xf3,
-		0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7,
-		0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9,
-		0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb,
-		0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
-		0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd,
-		0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe,
-		0xfe, 0xfe, 0xff, 0xff, 0xff
-	};
-	pss_write(devc, 0x0010);
-	pss_write(devc, log_scale[left] | 0x0000);
-	pss_write(devc, 0x0010);
-	pss_write(devc, log_scale[right] | 0x0100);
-}
-
-static void set_synth_volume(struct pss_confdata *devc, int volume)
-{
-	int vol = ((0x8000*volume)/100L);
-	pss_write(devc, 0x0080);
-	pss_write(devc, vol);
-	pss_write(devc, 0x0081);
-	pss_write(devc, vol);
-}
-
-static void set_bass(struct pss_confdata *devc, int level)
-{
-	int vol = (int)(((0xfd - 0xf0) * level)/100L) + 0xf0;
-	pss_write(devc, 0x0010);
-	pss_write(devc, vol | 0x0200);
-};
-
-static void set_treble(struct pss_confdata *devc, int level)
-{	
-	int vol = (((0xfd - 0xf0) * level)/100L) + 0xf0;
-	pss_write(devc, 0x0010);
-	pss_write(devc, vol | 0x0300);
-};
-
-static void pss_mixer_reset(struct pss_confdata *devc)
-{
-	set_master_volume(devc, 33, 33);
-	set_bass(devc, 50);
-	set_treble(devc, 50);
-	set_synth_volume(devc, 30);
-	pss_write (devc, 0x0010);
-	pss_write (devc, 0x0800 | 0xce);	/* Stereo */
-	
-	if(pss_mixer)
-	{
-		devc->mixer.volume_l = devc->mixer.volume_r = 33;
-		devc->mixer.bass = 50;
-		devc->mixer.treble = 50;
-		devc->mixer.synth = 30;
-	}
-}
-
-static int set_volume_mono(unsigned __user *p, unsigned int *aleft)
-{
-	unsigned int left, volume;
-	if (get_user(volume, p))
-		return -EFAULT;
-	
-	left = volume & 0xff;
-	if (left > 100)
-		left = 100;
-	*aleft = left;
-	return 0;
-}
-
-static int set_volume_stereo(unsigned __user *p,
-			     unsigned int *aleft,
-			     unsigned int *aright)
-{
-	unsigned int left, right, volume;
-	if (get_user(volume, p))
-		return -EFAULT;
-
-	left = volume & 0xff;
-	if (left > 100)
-		left = 100;
-	right = (volume >> 8) & 0xff;
-	if (right > 100)
-		right = 100;
-	*aleft = left;
-	*aright = right;
-	return 0;
-}
-
-static int ret_vol_mono(int left)
-{
-	return ((left << 8) | left);
-}
-
-static int ret_vol_stereo(int left, int right)
-{
-	return ((right << 8) | left);
-}
-
-static int call_ad_mixer(struct pss_confdata *devc, unsigned int cmd,
-			 void __user *arg)
-{
-	if (devc->ad_mixer_dev != NO_WSS_MIXER) 
-		return mixer_devs[devc->ad_mixer_dev]->ioctl(devc->ad_mixer_dev, cmd, arg);
-	else 
-		return -EINVAL;
-}
-
-static int pss_mixer_ioctl (int dev, unsigned int cmd, void __user *arg)
-{
-	struct pss_confdata *devc = mixer_devs[dev]->devc;
-	int cmdf = cmd & 0xff;
-	
-	if ((cmdf != SOUND_MIXER_VOLUME) && (cmdf != SOUND_MIXER_BASS) &&
-		(cmdf != SOUND_MIXER_TREBLE) && (cmdf != SOUND_MIXER_SYNTH) &&
-		(cmdf != SOUND_MIXER_DEVMASK) && (cmdf != SOUND_MIXER_STEREODEVS) &&
-		(cmdf != SOUND_MIXER_RECMASK) && (cmdf != SOUND_MIXER_CAPS) &&
-		(cmdf != SOUND_MIXER_RECSRC)) 
-	{
-		return call_ad_mixer(devc, cmd, arg);
-	}
-	
-	if (((cmd >> 8) & 0xff) != 'M')	
-		return -EINVAL;
-		
-	if (_SIOC_DIR (cmd) & _SIOC_WRITE)
-	{
-		switch (cmdf)	
-		{
-			case SOUND_MIXER_RECSRC:
-				if (devc->ad_mixer_dev != NO_WSS_MIXER)
-					return call_ad_mixer(devc, cmd, arg);
-				else
-				{
-					int v;
-					if (get_user(v, (int __user *)arg))
-						return -EFAULT;
-					if (v != 0)
-						return -EINVAL;
-					return 0;
-				}
-			case SOUND_MIXER_VOLUME:
-				if (set_volume_stereo(arg,
-					&devc->mixer.volume_l,
-					&devc->mixer.volume_r))
-					return -EFAULT;
-				set_master_volume(devc, devc->mixer.volume_l,
-					devc->mixer.volume_r);
-				return ret_vol_stereo(devc->mixer.volume_l,
-					devc->mixer.volume_r);
-		  
-			case SOUND_MIXER_BASS:
-				if (set_volume_mono(arg, &devc->mixer.bass))
-					return -EFAULT;
-				set_bass(devc, devc->mixer.bass);
-				return ret_vol_mono(devc->mixer.bass);
-		  
-			case SOUND_MIXER_TREBLE:
-				if (set_volume_mono(arg, &devc->mixer.treble))
-					return -EFAULT;
-				set_treble(devc, devc->mixer.treble);
-				return ret_vol_mono(devc->mixer.treble);
-		  
-			case SOUND_MIXER_SYNTH:
-				if (set_volume_mono(arg, &devc->mixer.synth))
-					return -EFAULT;
-				set_synth_volume(devc, devc->mixer.synth);
-				return ret_vol_mono(devc->mixer.synth);
-		  
-			default:
-				return -EINVAL;
-		}
-	}
-	else			
-	{
-		int val, and_mask = 0, or_mask = 0;
-		/*
-		 * Return parameters
-		 */
-		switch (cmdf)
-		{
-			case SOUND_MIXER_DEVMASK:
-				if (call_ad_mixer(devc, cmd, arg) == -EINVAL)
-					break;
-				and_mask = ~0;
-				or_mask = SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_SYNTH;
-				break;
-		  
-			case SOUND_MIXER_STEREODEVS:
-				if (call_ad_mixer(devc, cmd, arg) == -EINVAL)
-					break;
-				and_mask = ~0;
-				or_mask = SOUND_MASK_VOLUME;
-				break;
-		  
-			case SOUND_MIXER_RECMASK:
-				if (devc->ad_mixer_dev != NO_WSS_MIXER)
-					return call_ad_mixer(devc, cmd, arg);
-				break;
-
-			case SOUND_MIXER_CAPS:
-				if (devc->ad_mixer_dev != NO_WSS_MIXER)
-					return call_ad_mixer(devc, cmd, arg);
-				or_mask = SOUND_CAP_EXCL_INPUT;
-				break;
-
-			case SOUND_MIXER_RECSRC:
-				if (devc->ad_mixer_dev != NO_WSS_MIXER)
-					return call_ad_mixer(devc, cmd, arg);
-				break;
-
-			case SOUND_MIXER_VOLUME:
-				or_mask =  ret_vol_stereo(devc->mixer.volume_l, devc->mixer.volume_r);
-				break;
-			  
-			case SOUND_MIXER_BASS:
-				or_mask =  ret_vol_mono(devc->mixer.bass);
-				break;
-			  
-			case SOUND_MIXER_TREBLE:
-				or_mask = ret_vol_mono(devc->mixer.treble);
-				break;
-			  
-			case SOUND_MIXER_SYNTH:
-				or_mask = ret_vol_mono(devc->mixer.synth);
-				break;
-			default:
-				return -EINVAL;
-		}
-		if (get_user(val, (int __user *)arg))
-			return -EFAULT;
-		val &= and_mask;
-		val |= or_mask;
-		if (put_user(val, (int __user *)arg))
-			return -EFAULT;
-		return val;
-	}
-}
-
-static struct mixer_operations pss_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "SOUNDPORT",
-	.name	= "PSS-AD1848",
-	.ioctl	= pss_mixer_ioctl
-};
-
-static void disable_all_emulations(void)
-{
-	outw(0x0000, REG(CONF_PSS));	/* 0x0400 enables joystick */
-	outw(0x0000, REG(CONF_WSS));
-	outw(0x0000, REG(CONF_SB));
-	outw(0x0000, REG(CONF_MIDI));
-	outw(0x0000, REG(CONF_CDROM));
-}
-
-static void configure_nonsound_components(void)
-{
-	/* Configure Joystick port */
-
-	if(pss_enable_joystick)
-	{
-		outw(0x0400, REG(CONF_PSS));	/* 0x0400 enables joystick */
-		printk(KERN_INFO "PSS: joystick enabled.\n");
-	}
-	else
-	{
-		printk(KERN_INFO "PSS: joystick port not enabled.\n");
-	}
-
-	/* Configure CDROM port */
-
-	if (pss_cdrom_port == -1) {	/* If cdrom port enablation wasn't requested */
-		printk(KERN_INFO "PSS: CDROM port not enabled.\n");
-	} else if (!request_region(pss_cdrom_port, 2, "PSS CDROM")) {
-		pss_cdrom_port = -1;
-		printk(KERN_ERR "PSS: CDROM I/O port conflict.\n");
-	} else {
-		set_io_base(devc, CONF_CDROM, pss_cdrom_port);
-		printk(KERN_INFO "PSS: CDROM I/O port set to 0x%x.\n", pss_cdrom_port);
-	}
-}
-
-static int __init attach_pss(struct address_info *hw_config)
-{
-	unsigned short  id;
-	char tmp[100];
-
-	devc->base = hw_config->io_base;
-	devc->irq = hw_config->irq;
-	devc->dma = hw_config->dma;
-	devc->osp = hw_config->osp;
-	devc->ad_mixer_dev = NO_WSS_MIXER;
-
-	if (!probe_pss(hw_config))
-		return 0;
-
-	id = inw(REG(PSS_ID)) & 0x00ff;
-
-	/*
-	 * Disable all emulations. Will be enabled later (if required).
-	 */
-	 
-	disable_all_emulations();
-
-#ifdef YOU_REALLY_WANT_TO_ALLOCATE_THESE_RESOURCES
-	if (sound_alloc_dma(hw_config->dma, "PSS"))
-	{
-		printk("pss.c: Can't allocate DMA channel.\n");
-		release_region(hw_config->io_base, 0x10);
-		release_region(hw_config->io_base+0x10, 0x9);
-		return 0;
-	}
-	if (!set_irq(devc, CONF_PSS, devc->irq))
-	{
-		printk("PSS: IRQ allocation error.\n");
-		release_region(hw_config->io_base, 0x10);
-		release_region(hw_config->io_base+0x10, 0x9);
-		return 0;
-	}
-	if (!set_dma(devc, CONF_PSS, devc->dma))
-	{
-		printk(KERN_ERR "PSS: DMA allocation error\n");
-		release_region(hw_config->io_base, 0x10);
-		release_region(hw_config->io_base+0x10, 0x9);
-		return 0;
-	}
-#endif
-
-	configure_nonsound_components();
-	pss_initialized = 1;
-	sprintf(tmp, "ECHO-PSS  Rev. %d", id);
-	conf_printf(tmp, hw_config);
-	return 1;
-}
-
-static int __init probe_pss_mpu(struct address_info *hw_config)
-{
-	struct resource *ports;
-	int timeout;
-
-	if (!pss_initialized)
-		return 0;
-
-	ports = request_region(hw_config->io_base, 2, "mpu401");
-
-	if (!ports) {
-		printk(KERN_ERR "PSS: MPU I/O port conflict\n");
-		return 0;
-	}
-	set_io_base(devc, CONF_MIDI, hw_config->io_base);
-	if (!set_irq(devc, CONF_MIDI, hw_config->irq)) {
-		printk(KERN_ERR "PSS: MIDI IRQ allocation error.\n");
-		goto fail;
-	}
-	if (!pss_synthLen) {
-		printk(KERN_ERR "PSS: Can't enable MPU. MIDI synth microcode not available.\n");
-		goto fail;
-	}
-	if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST)) {
-		printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
-		goto fail;
-	}
-
-	/*
-	 * Finally wait until the DSP algorithm has initialized itself and
-	 * deactivates receive interrupt.
-	 */
-
-	for (timeout = 900000; timeout > 0; timeout--)
-	{
-		if ((inb(hw_config->io_base + 1) & 0x80) == 0)	/* Input data avail */
-			inb(hw_config->io_base);	/* Discard it */
-		else
-			break;	/* No more input */
-	}
-
-	if (!probe_mpu401(hw_config, ports))
-		goto fail;
-
-	attach_mpu401(hw_config, THIS_MODULE);	/* Slot 1 */
-	if (hw_config->slots[1] != -1)	/* The MPU driver installed itself */
-		midi_devs[hw_config->slots[1]]->coproc = &pss_coproc_operations;
-	return 1;
-fail:
-	release_region(hw_config->io_base, 2);
-	return 0;
-}
-
-static int pss_coproc_open(void *dev_info, int sub_device)
-{
-	switch (sub_device)
-	{
-		case COPR_MIDI:
-			if (pss_synthLen == 0)
-			{
-				printk(KERN_ERR "PSS: MIDI synth microcode not available.\n");
-				return -EIO;
-			}
-			if (nonstandard_microcode)
-				if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST))
-			{
-				printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
-				return -EIO;
-			}
-			nonstandard_microcode = 0;
-			break;
-
-		default:
-			break;
-	}
-	return 0;
-}
-
-static void pss_coproc_close(void *dev_info, int sub_device)
-{
-	return;
-}
-
-static void pss_coproc_reset(void *dev_info)
-{
-	if (pss_synthLen)
-		if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST))
-		{
-			printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
-		}
-	nonstandard_microcode = 0;
-}
-
-static int download_boot_block(void *dev_info, copr_buffer * buf)
-{
-	if (buf->len <= 0 || buf->len > sizeof(buf->data))
-		return -EINVAL;
-
-	if (!pss_download_boot(devc, buf->data, buf->len, buf->flags))
-	{
-		printk(KERN_ERR "PSS: Unable to load microcode block to DSP.\n");
-		return -EIO;
-	}
-	nonstandard_microcode = 1;	/* The MIDI microcode has been overwritten */
-	return 0;
-}
-
-static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
-{
-	copr_buffer *buf;
-	copr_msg *mbuf;
-	copr_debug_buf dbuf;
-	unsigned short tmp;
-	unsigned long flags;
-	unsigned short *data;
-	int i, err;
-	/* printk( "PSS coproc ioctl %x %x %d\n",  cmd,  arg,  local); */
-	
-	switch (cmd) 
-	{
-		case SNDCTL_COPR_RESET:
-			pss_coproc_reset(dev_info);
-			return 0;
-
-		case SNDCTL_COPR_LOAD:
-			buf = vmalloc(sizeof(copr_buffer));
-			if (buf == NULL)
-				return -ENOSPC;
-			if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
-				vfree(buf);
-				return -EFAULT;
-			}
-			err = download_boot_block(dev_info, buf);
-			vfree(buf);
-			return err;
-		
-		case SNDCTL_COPR_SENDMSG:
-			mbuf = vmalloc(sizeof(copr_msg));
-			if (mbuf == NULL)
-				return -ENOSPC;
-			if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
-				vfree(mbuf);
-				return -EFAULT;
-			}
-			data = (unsigned short *)(mbuf->data);
-			spin_lock_irqsave(&lock, flags);
-			for (i = 0; i < mbuf->len; i++) {
-				if (!pss_put_dspword(devc, *data++)) {
-					spin_unlock_irqrestore(&lock,flags);
-					mbuf->len = i;	/* feed back number of WORDs sent */
-					err = copy_to_user(arg, mbuf, sizeof(copr_msg));
-					vfree(mbuf);
-					return err ? -EFAULT : -EIO;
-				}
-			}
-			spin_unlock_irqrestore(&lock,flags);
-			vfree(mbuf);
-			return 0;
-
-		case SNDCTL_COPR_RCVMSG:
-			err = 0;
-			mbuf = vmalloc(sizeof(copr_msg));
-			if (mbuf == NULL)
-				return -ENOSPC;
-			data = (unsigned short *)mbuf->data;
-			spin_lock_irqsave(&lock, flags);
-			for (i = 0; i < sizeof(mbuf->data)/sizeof(unsigned short); i++) {
-				mbuf->len = i;	/* feed back number of WORDs read */
-				if (!pss_get_dspword(devc, data++)) {
-					if (i == 0)
-						err = -EIO;
-					break;
-				}
-			}
-			spin_unlock_irqrestore(&lock,flags);
-			if (copy_to_user(arg, mbuf, sizeof(copr_msg)))
-				err = -EFAULT;
-			vfree(mbuf);
-			return err;
-		
-		case SNDCTL_COPR_RDATA:
-			if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
-				return -EFAULT;
-			spin_lock_irqsave(&lock, flags);
-			if (!pss_put_dspword(devc, 0x00d0)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_get_dspword(devc, &tmp)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			dbuf.parm1 = tmp;
-			spin_unlock_irqrestore(&lock,flags);
-			if (copy_to_user(arg, &dbuf, sizeof(dbuf)))
-				return -EFAULT;
-			return 0;
-		
-		case SNDCTL_COPR_WDATA:
-			if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
-				return -EFAULT;
-			spin_lock_irqsave(&lock, flags);
-			if (!pss_put_dspword(devc, 0x00d1)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_put_dspword(devc, (unsigned short) (dbuf.parm1 & 0xffff))) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			tmp = (unsigned int)dbuf.parm2 & 0xffff;
-			if (!pss_put_dspword(devc, tmp)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			spin_unlock_irqrestore(&lock,flags);
-			return 0;
-		
-		case SNDCTL_COPR_WCODE:
-			if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
-				return -EFAULT;
-			spin_lock_irqsave(&lock, flags);
-			if (!pss_put_dspword(devc, 0x00d3)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			tmp = (unsigned int)dbuf.parm2 & 0x00ff;
-			if (!pss_put_dspword(devc, tmp)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			tmp = ((unsigned int)dbuf.parm2 >> 8) & 0xffff;
-			if (!pss_put_dspword(devc, tmp)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			spin_unlock_irqrestore(&lock,flags);
-			return 0;
-		
-		case SNDCTL_COPR_RCODE:
-			if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
-				return -EFAULT;
-			spin_lock_irqsave(&lock, flags);
-			if (!pss_put_dspword(devc, 0x00d2)) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			if (!pss_get_dspword(devc, &tmp)) { /* Read MSB */
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			dbuf.parm1 = tmp << 8;
-			if (!pss_get_dspword(devc, &tmp)) { /* Read LSB */
-				spin_unlock_irqrestore(&lock,flags);
-				return -EIO;
-			}
-			dbuf.parm1 |= tmp & 0x00ff;
-			spin_unlock_irqrestore(&lock,flags);
-			if (copy_to_user(arg, &dbuf, sizeof(dbuf)))
-				return -EFAULT;
-			return 0;
-
-		default:
-			return -EINVAL;
-	}
-	return -EINVAL;
-}
-
-static coproc_operations pss_coproc_operations =
-{
-	"ADSP-2115",
-	THIS_MODULE,
-	pss_coproc_open,
-	pss_coproc_close,
-	pss_coproc_ioctl,
-	pss_coproc_reset,
-	&pss_data
-};
-
-static int __init probe_pss_mss(struct address_info *hw_config)
-{
-	volatile int timeout;
-	struct resource *ports;
-	int        my_mix = -999;	/* gcc shut up */
-
-	if (!pss_initialized)
-		return 0;
-
-	if (!request_region(hw_config->io_base, 4, "WSS config")) {
-		printk(KERN_ERR "PSS: WSS I/O port conflicts.\n");
-		return 0;
-	}
-	ports = request_region(hw_config->io_base + 4, 4, "ad1848");
-	if (!ports) {
-		printk(KERN_ERR "PSS: WSS I/O port conflicts.\n");
-		release_region(hw_config->io_base, 4);
-		return 0;
-	}
-	set_io_base(devc, CONF_WSS, hw_config->io_base);
-	if (!set_irq(devc, CONF_WSS, hw_config->irq)) {
-		printk("PSS: WSS IRQ allocation error.\n");
-		goto fail;
-	}
-	if (!set_dma(devc, CONF_WSS, hw_config->dma)) {
-		printk(KERN_ERR "PSS: WSS DMA allocation error\n");
-		goto fail;
-	}
-	/*
-	 * For some reason the card returns 0xff in the WSS status register
-	 * immediately after boot. Probably MIDI+SB emulation algorithm
-	 * downloaded to the ADSP2115 spends some time initializing the card.
-	 * Let's try to wait until it finishes this task.
-	 */
-	for (timeout = 0; timeout < 100000 && (inb(hw_config->io_base + WSS_INDEX) &
-	  WSS_INITIALIZING); timeout++)
-		;
-
-	outb((0x0b), hw_config->io_base + WSS_INDEX);	/* Required by some cards */
-
-	for (timeout = 0; (inb(hw_config->io_base + WSS_DATA) & WSS_AUTOCALIBRATION) &&
-	  (timeout < 100000); timeout++)
-		;
-
-	if (!probe_ms_sound(hw_config, ports))
-		goto fail;
-
-	devc->ad_mixer_dev = NO_WSS_MIXER;
-	if (pss_mixer) 
-	{
-		if ((my_mix = sound_install_mixer (MIXER_DRIVER_VERSION,
-			"PSS-SPEAKERS and AD1848 (through MSS audio codec)",
-			&pss_mixer_operations,
-			sizeof (struct mixer_operations),
-			devc)) < 0) 
-		{
-			printk(KERN_ERR "Could not install PSS mixer\n");
-			goto fail;
-		}
-	}
-	pss_mixer_reset(devc);
-	attach_ms_sound(hw_config, ports, THIS_MODULE);	/* Slot 0 */
-
-	if (hw_config->slots[0] != -1)
-	{
-		/* The MSS driver installed itself */
-		audio_devs[hw_config->slots[0]]->coproc = &pss_coproc_operations;
-		if (pss_mixer && (num_mixers == (my_mix + 2)))
-		{
-			/* The MSS mixer installed */
-			devc->ad_mixer_dev = audio_devs[hw_config->slots[0]]->mixer_dev;
-		}
-	}
-	return 1;
-fail:
-	release_region(hw_config->io_base + 4, 4);
-	release_region(hw_config->io_base, 4);
-	return 0;
-}
-
-static inline void __exit unload_pss(struct address_info *hw_config)
-{
-	release_region(hw_config->io_base, 0x10);
-	release_region(hw_config->io_base+0x10, 0x9);
-}
-
-static inline void __exit unload_pss_mpu(struct address_info *hw_config)
-{
-	unload_mpu401(hw_config);
-}
-
-static inline void __exit unload_pss_mss(struct address_info *hw_config)
-{
-	unload_ms_sound(hw_config);
-}
-
-
-static struct address_info cfg;
-static struct address_info cfg2;
-static struct address_info cfg_mpu;
-
-static int pss_io __initdata	= -1;
-static int mss_io __initdata	= -1;
-static int mss_irq __initdata	= -1;
-static int mss_dma __initdata	= -1;
-static int mpu_io __initdata	= -1;
-static int mpu_irq __initdata	= -1;
-static bool pss_no_sound = 0;	/* Just configure non-sound components */
-static bool pss_keep_settings  = 1;	/* Keep hardware settings at module exit */
-static char *pss_firmware = "/etc/sound/pss_synth";
-
-module_param_hw(pss_io, int, ioport, 0);
-MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)");
-module_param_hw(mss_io, int, ioport, 0);
-MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)");
-module_param_hw(mss_irq, int, irq, 0);
-MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param_hw(mss_dma, int, dma, 0);
-MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)");
-module_param_hw(mpu_io, int, ioport, 0);
-MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)");
-module_param_hw(mpu_irq, int, irq, 0);
-MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param_hw(pss_cdrom_port, int, ioport, 0);
-MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)");
-module_param(pss_enable_joystick, bool, 0);
-MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)");
-module_param(pss_no_sound, bool, 0);
-MODULE_PARM_DESC(pss_no_sound, "Configure sound compoents (0 - no, 1 - yes)");
-module_param(pss_keep_settings, bool, 0);
-MODULE_PARM_DESC(pss_keep_settings, "Keep hardware setting at driver unloading (0 - no, 1 - yes)");
-module_param(pss_firmware, charp, 0);
-MODULE_PARM_DESC(pss_firmware, "Location of the firmware file (default - /etc/sound/pss_synth)");
-module_param(pss_mixer, bool, 0);
-MODULE_PARM_DESC(pss_mixer, "Enable (1) or disable (0) PSS mixer (controlling of output volume, bass, treble, synth volume). The mixer is not available on all PSS cards.");
-MODULE_AUTHOR("Hannu Savolainen, Vladimir Michl");
-MODULE_DESCRIPTION("Module for PSS sound cards (based on AD1848, ADSP-2115 and ESC614). This module includes control of output amplifier and synth volume of the Beethoven ADSP-16 card (this may work with other PSS cards).");
-MODULE_LICENSE("GPL");
-
-
-static int fw_load = 0;
-static int pssmpu = 0, pssmss = 0;
-
-/*
- *    Load a PSS sound card module
- */
-
-static int __init init_pss(void)
-{
-
-	if(pss_no_sound)		/* If configuring only nonsound components */
-	{
-		cfg.io_base = pss_io;
-		if(!probe_pss(&cfg))
-			return -ENODEV;
-		printk(KERN_INFO "ECHO-PSS  Rev. %d\n", inw(REG(PSS_ID)) & 0x00ff);
-		printk(KERN_INFO "PSS: loading in no sound mode.\n");
-		disable_all_emulations();
-		configure_nonsound_components();
-		release_region(pss_io, 0x10);
-		release_region(pss_io + 0x10, 0x9);
-		return 0;
-	}
-
-	cfg.io_base = pss_io;
-
-	cfg2.io_base = mss_io;
-	cfg2.irq = mss_irq;
-	cfg2.dma = mss_dma;
-
-	cfg_mpu.io_base = mpu_io;
-	cfg_mpu.irq = mpu_irq;
-
-	if (cfg.io_base == -1 || cfg2.io_base == -1 || cfg2.irq == -1 || cfg.dma == -1) {
-		printk(KERN_INFO "pss: mss_io, mss_dma, mss_irq and pss_io must be set.\n");
-		return -EINVAL;
-	}
-
-	if (!pss_synth) {
-		fw_load = 1;
-		pss_synthLen = mod_firmware_load(pss_firmware, (void *) &pss_synth);
-	}
-	if (!attach_pss(&cfg))
-		return -ENODEV;
-	/*
-	 *    Attach stuff
-	 */
-	if (probe_pss_mpu(&cfg_mpu))
-		pssmpu = 1;
-
-	if (probe_pss_mss(&cfg2))
-		pssmss = 1;
-
-	return 0;
-}
-
-static void __exit cleanup_pss(void)
-{
-	if(!pss_no_sound)
-	{
-		if (fw_load)
-			vfree(pss_synth);
-		if(pssmss)
-			unload_pss_mss(&cfg2);
-		if(pssmpu)
-			unload_pss_mpu(&cfg_mpu);
-		unload_pss(&cfg);
-	} else if (pss_cdrom_port != -1)
-		release_region(pss_cdrom_port, 2);
-
-	if(!pss_keep_settings)	/* Keep hardware settings if asked */
-	{
-		disable_all_emulations();
-		printk(KERN_INFO "Resetting PSS sound card configurations.\n");
-	}
-}
-
-module_init(init_pss);
-module_exit(cleanup_pss);
-
-#ifndef MODULE
-static int __init setup_pss(char *str)
-{
-	/* io, mss_io, mss_irq, mss_dma, mpu_io, mpu_irq */
-	int ints[7];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	pss_io	= ints[1];
-	mss_io	= ints[2];
-	mss_irq	= ints[3];
-	mss_dma	= ints[4];
-	mpu_io	= ints[5];
-	mpu_irq	= ints[6];
-
-	return 1;
-}
-
-__setup("pss=", setup_pss);
-#endif
diff --git a/sound/oss/sb.h b/sound/oss/sb.h
deleted file mode 100644
index 77e8891ce333..000000000000
--- a/sound/oss/sb.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#define DSP_RESET	(devc->base + 0x6)
-#define DSP_READ	(devc->base + 0xA)
-#define DSP_WRITE	(devc->base + 0xC)
-#define DSP_COMMAND	(devc->base + 0xC)
-#define DSP_STATUS	(devc->base + 0xC)
-#define DSP_DATA_AVAIL	(devc->base + 0xE)
-#define DSP_DATA_AVL16	(devc->base + 0xF)
-#define MIXER_ADDR	(devc->base + 0x4)
-#define MIXER_DATA	(devc->base + 0x5)
-#define OPL3_LEFT	(devc->base + 0x0)
-#define OPL3_RIGHT	(devc->base + 0x2)
-#define OPL3_BOTH	(devc->base + 0x8)
-/* DSP Commands */
-
-#define DSP_CMD_SPKON		0xD1
-#define DSP_CMD_SPKOFF		0xD3
-#define DSP_CMD_DMAON		0xD0
-#define DSP_CMD_DMAOFF		0xD4
-
-#define IMODE_NONE		0
-#define IMODE_OUTPUT		PCM_ENABLE_OUTPUT
-#define IMODE_INPUT		PCM_ENABLE_INPUT
-#define IMODE_INIT		3
-#define IMODE_MIDI		4
-
-#define NORMAL_MIDI	0
-#define UART_MIDI	1
-
-
-/*
- * Device models
- */
-#define MDL_NONE	0
-#define MDL_SB1		1	/* SB1.0 or 1.5 */
-#define MDL_SB2		2	/* SB2.0 */
-#define MDL_SB201	3	/* SB2.01 */
-#define MDL_SBPRO	4	/* SB Pro */
-#define MDL_SB16	5	/* SB16/32/AWE */
-#define MDL_SBPNP 	6	/* SB16/32/AWE PnP */
-#define MDL_JAZZ	10	/* Media Vision Jazz16 */
-#define MDL_SMW		11	/* Logitech SoundMan Wave (Jazz16) */
-#define MDL_ESS		12	/* ESS ES688 and ES1688 */
-#define MDL_AZTECH	13	/* Aztech Sound Galaxy family */
-#define MDL_ES1868MIDI	14	/* MIDI port of ESS1868 */
-#define MDL_AEDSP	15	/* Audio Excel DSP 16 */
-#define MDL_ESSPCI	16	/* ESS PCI card */
-#define MDL_YMPCI	17	/* Yamaha PCI sb in emulation */
-
-#define SUBMDL_ALS007	42	/* ALS-007 differs from SB16 only in mixer */
-				/* register assignment */
-#define SUBMDL_ALS100	43	/* ALS-100 allows sampling rates of up */
-				/* to 48kHz */
-				
-/*
- * Config flags
- */
-#define SB_NO_MIDI	0x00000001
-#define SB_NO_MIXER	0x00000002
-#define SB_NO_AUDIO	0x00000004
-#define SB_NO_RECORDING	0x00000008 /* No audio recording */
-#define SB_MIDI_ONLY	(SB_NO_AUDIO|SB_NO_MIXER)
-#define SB_PCI_IRQ	0x00000010 /* PCI shared IRQ */
-
-struct mixer_def {
-	unsigned int regno: 8;
-	unsigned int bitoffs:4;
-	unsigned int nbits:4;
-};
-
-typedef struct mixer_def mixer_tab[32][2];
-typedef struct mixer_def mixer_ent;
-
-struct sb_module_options
-{
-	int  esstype;	/* ESS chip type */
-	int  acer;	/* Do acer notebook init? */
-	int  sm_games;	/* Logitech soundman games? */
-};
-
-typedef struct sb_devc {
-	   int dev;
-
-	/* Hardware parameters */
-	   int *osp;
-	   int minor, major;
-	   int type;
-	   int model, submodel;
-	   int caps;
-#	define SBCAP_STEREO	0x00000001
-#	define SBCAP_16BITS	0x00000002
-
-	/* Hardware resources */
-	   int base;
-	   int irq;
-	   int dma8, dma16;
-	   
-	   int pcibase;		/* For ESS Maestro etc */
-
-	/* State variables */
- 	   int opened;
-	/* new audio fields for full duplex support */
-	   int fullduplex;
-	   int duplex;
-	   int speed, bits, channels;
-	   volatile int irq_ok;
-	   volatile int intr_active, irq_mode;
-	/* duplicate audio fields for full duplex support */
-	   volatile int intr_active_16, irq_mode_16;
-
-	/* Mixer fields */
-	   int *levels;
-	   mixer_tab *iomap;
-	   size_t iomap_sz; /* number or records in the iomap table */
-	   int mixer_caps, recmask, outmask, supported_devices;
-	   int supported_rec_devices, supported_out_devices;
-	   int my_mixerdev;
-	   int sbmixnum;
-
-	/* Audio fields */
-	   unsigned long trg_buf;
-	   int      trigger_bits;
-	   int      trg_bytes;
-	   int      trg_intrflag;
-	   int      trg_restart;
-	/* duplicate audio fields for full duplex support */
-	   unsigned long trg_buf_16;
-	   int      trigger_bits_16;
-	   int      trg_bytes_16;
-	   int      trg_intrflag_16;
-	   int      trg_restart_16;
-
-	   unsigned char tconst;
-	
-	/* MIDI fields */
-	   int my_mididev;
-	   int input_opened;
-	   int midi_broken;
-	   void (*midi_input_intr) (int dev, unsigned char data);
-	   void *midi_irq_cookie;		/* IRQ cookie for the midi */
-
-	   spinlock_t lock;
-
-	   struct sb_module_options sbmo;	/* Module options */
-
-	} sb_devc;
-	
-/*
- *	PCI card types
- */
-
-#define	SB_PCI_ESSMAESTRO	1	/* ESS Maestro Legacy */
-#define	SB_PCI_YAMAHA		2	/* Yamaha Legacy */
-
-/* 
- *	Functions
- */
- 
-int sb_dsp_command (sb_devc *devc, unsigned char val);
-int sb_dsp_get_byte(sb_devc * devc);
-int sb_dsp_reset (sb_devc *devc);
-void sb_setmixer (sb_devc *devc, unsigned int port, unsigned int value);
-unsigned int sb_getmixer (sb_devc *devc, unsigned int port);
-int sb_dsp_detect (struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo);
-int sb_dsp_init (struct address_info *hw_config, struct module *owner);
-void sb_dsp_unload(struct address_info *hw_config, int sbmpu);
-int sb_mixer_init(sb_devc *devc, struct module *owner);
-void sb_mixer_unload(sb_devc *devc);
-void sb_mixer_set_stereo (sb_devc *devc, int mode);
-void smw_mixer_init(sb_devc *devc);
-void sb_dsp_midi_init (sb_devc *devc, struct module *owner);
-void sb_audio_init (sb_devc *devc, char *name, struct module *owner);
-void sb_midi_interrupt (sb_devc *devc);
-void sb_chgmixer (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val);
-int sb_common_mixer_set(sb_devc * devc, int dev, int left, int right);
-
-int sb_audio_open(int dev, int mode);
-void sb_audio_close(int dev);
-
-/*	From sb_common.c */
-void sb_dsp_disable_midi(int port);
-int probe_sbmpu (struct address_info *hw_config, struct module *owner);
-void unload_sbmpu (struct address_info *hw_config);
-
-void unload_sb16(struct address_info *hw_info);
-void unload_sb16midi(struct address_info *hw_info);
diff --git a/sound/oss/sb_audio.c b/sound/oss/sb_audio.c
deleted file mode 100644
index dc91072f4d82..000000000000
--- a/sound/oss/sb_audio.c
+++ /dev/null
@@ -1,1097 +0,0 @@
-/*
- * sound/oss/sb_audio.c
- *
- * Audio routines for Sound Blaster compatible cards.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Changes
- *	Alan Cox	:	Formatting and clean ups
- *
- * Status
- *	Mostly working. Weird uart bug causing irq storms
- *
- * Daniel J. Rodriksson: Changes to make sb16 work full duplex.
- *                       Maybe other 16 bit cards in this code could behave
- *                       the same.
- * Chris Rankin:         Use spinlocks instead of CLI/STI
- */
-
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-
-#include "sb_mixer.h"
-#include "sb.h"
-
-#include "sb_ess.h"
-
-int sb_audio_open(int dev, int mode)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-	{
-		  printk(KERN_ERR "Sound Blaster: incomplete initialization.\n");
-		  return -ENXIO;
-	}
-	if (devc->caps & SB_NO_RECORDING && mode & OPEN_READ)
-	{
-		if (mode == OPEN_READ)
-			return -EPERM;
-	}
-	spin_lock_irqsave(&devc->lock, flags);
-	if (devc->opened)
-	{
-		  spin_unlock_irqrestore(&devc->lock, flags);
-		  return -EBUSY;
-	}
-	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
-	{
-		if (sound_open_dma(devc->dma16, "Sound Blaster 16 bit"))
-		{
-		  	spin_unlock_irqrestore(&devc->lock, flags);
-			return -EBUSY;
-		}
-	}
-	devc->opened = mode;
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->irq_mode = IMODE_NONE;
-	devc->irq_mode_16 = IMODE_NONE;
-	devc->fullduplex = devc->duplex &&
-		((mode & OPEN_READ) && (mode & OPEN_WRITE));
-	sb_dsp_reset(devc);
-
-	/* At first glance this check isn't enough, some ESS chips might not 
-	 * have a RECLEV. However if they don't common_mixer_set will refuse 
-	 * cause devc->iomap has no register mapping for RECLEV
-	 */
-	if (devc->model == MDL_ESS) ess_mixer_reload (devc, SOUND_MIXER_RECLEV);
-
-	/* The ALS007 seems to require that the DSP be removed from the output */
-	/* in order for recording to be activated properly.  This is done by   */
-	/* setting the appropriate bits of the output control register 4ch to  */
-	/* zero.  This code assumes that the output control registers are not  */
-	/* used anywhere else and therefore the DSP bits are *always* ON for   */
-	/* output and OFF for sampling.                                        */
-
-	if (devc->submodel == SUBMDL_ALS007) 
-	{
-		if (mode & OPEN_READ) 
-			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) & 0xf9);
-		else
-			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
-	}
-	return 0;
-}
-
-void sb_audio_close(int dev)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/* fix things if mmap turned off fullduplex */
-	if(devc->duplex
-	   && !devc->fullduplex
-	   && (devc->opened & OPEN_READ) && (devc->opened & OPEN_WRITE))
-		swap(audio_devs[dev]->dmap_out, audio_devs[dev]->dmap_in);
-
-	audio_devs[dev]->dmap_out->dma = devc->dma8;
-	audio_devs[dev]->dmap_in->dma = ( devc->duplex ) ?
-		devc->dma16 : devc->dma8;
-
-	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
-		sound_close_dma(devc->dma16);
-
-	/* For ALS007, turn DSP output back on if closing the device for read */
-	
-	if ((devc->submodel == SUBMDL_ALS007) && (devc->opened & OPEN_READ)) 
-	{
-		sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-			sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
-	}
-	devc->opened = 0;
-}
-
-static void sb_set_output_parms(int dev, unsigned long buf, int nr_bytes,
-		    int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
-	{
-		devc->trg_buf = buf;
-		devc->trg_bytes = nr_bytes;
-		devc->trg_intrflag = intrflag;
-		devc->irq_mode = IMODE_OUTPUT;
-	}
-	else
-	{
-		devc->trg_buf_16 = buf;
-		devc->trg_bytes_16 = nr_bytes;
-		devc->trg_intrflag_16 = intrflag;
-		devc->irq_mode_16 = IMODE_OUTPUT;
-	}
-}
-
-static void sb_set_input_parms(int dev, unsigned long buf, int count, int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
-	{
-		devc->trg_buf = buf;
-		devc->trg_bytes = count;
-		devc->trg_intrflag = intrflag;
-		devc->irq_mode = IMODE_INPUT;
-	}
-	else
-	{
-		devc->trg_buf_16 = buf;
-		devc->trg_bytes_16 = count;
-		devc->trg_intrflag_16 = intrflag;
-		devc->irq_mode_16 = IMODE_INPUT;
-	}
-}
-
-/*
- * SB1.x compatible routines 
- */
-
-static void sb1_audio_output_block(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_OUTPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x14))		/* 8 bit DAC using DMA */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-	}
-	else
-		printk(KERN_WARNING "Sound Blaster:  unable to start DAC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb1_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/*
-	 * Start a DMA input to the buffer pointed by dmaqtail
-	 */
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_INPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x24))		/* 8 bit ADC using DMA */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-	}
-	else
-		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->intr_active = 1;
-}
-
-static void sb1_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	bits &= devc->irq_mode;
-
-	if (!bits)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		switch (devc->irq_mode)
-		{
-			case IMODE_INPUT:
-				sb1_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-
-			case IMODE_OUTPUT:
-				sb1_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-		}
-	}
-	devc->trigger_bits = bits;
-}
-
-static int sb1_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKOFF);
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb1_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKON);
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb1_audio_set_speed(int dev, int speed)
-{
-	int max_speed = 23000;
-	sb_devc *devc = audio_devs[dev]->devc;
-	int tmp;
-
-	if (devc->opened & OPEN_READ)
-		max_speed = 13000;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-
-		if (speed > max_speed)
-			speed = max_speed;
-
-		devc->tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff;
-		tmp = 256 - devc->tconst;
-		speed = (1000000 + tmp / 2) / tmp;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-static short sb1_audio_set_channels(int dev, short channels)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	return devc->channels = 1;
-}
-
-static unsigned int sb1_audio_set_bits(int dev, unsigned int bits)
-{
-	sb_devc        *devc = audio_devs[dev]->devc;
-	return devc->bits = 8;
-}
-
-static void sb1_audio_halt_xfer(int dev)
-{
-	unsigned long flags;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	sb_dsp_reset(devc);
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-/*
- * SB 2.0 and SB 2.01 compatible routines
- */
-
-static void sb20_audio_output_block(int dev, unsigned long buf, int nr_bytes,
-			int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned char cmd;
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_OUTPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-
-		if (devc->speed * devc->channels <= 23000)
-			cmd = 0x1c;	/* 8 bit PCM output */
-		else
-			cmd = 0x90;	/* 8 bit high speed PCM output (SB2.01/Pro) */
-
-		if (!sb_dsp_command(devc, cmd))
-			printk(KERN_ERR "Sound Blaster:  unable to start DAC.\n");
-	}
-	else
-		printk(KERN_ERR "Sound Blaster: unable to start DAC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb20_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned char cmd;
-
-	/*
-	 * Start a DMA input to the buffer pointed by dmaqtail
-	 */
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_INPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-
-		if (devc->speed * devc->channels <= (devc->major == 3 ? 23000 : 13000))
-			cmd = 0x2c;	/* 8 bit PCM input */
-		else
-			cmd = 0x98;	/* 8 bit high speed PCM input (SB2.01/Pro) */
-
-		if (!sb_dsp_command(devc, cmd))
-			printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	}
-	else
-		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb20_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	bits &= devc->irq_mode;
-
-	if (!bits)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		switch (devc->irq_mode)
-		{
-			case IMODE_INPUT:
-				sb20_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-
-			case IMODE_OUTPUT:
-				sb20_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-			    break;
-		}
-	}
-	devc->trigger_bits = bits;
-}
-
-/*
- * SB2.01 specific speed setup
- */
-
-static int sb201_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	int tmp;
-	int s;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-		if (speed > 44100)
-			speed = 44100;
-		if (devc->opened & OPEN_READ && speed > 15000)
-			speed = 15000;
-		s = speed * devc->channels;
-		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
-		tmp = 256 - devc->tconst;
-		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-/*
- * SB Pro specific routines
- */
-
-static int sbpro_audio_prepare_for_input(int dev, int bsize, int bcount)
-{				/* For SB Pro and Jazz16 */
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-	unsigned char bits = 0;
-
-	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
-		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma =
-			devc->bits == 16 ? devc->dma16 : devc->dma8;
-
-	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
-		if (devc->bits == AFMT_S16_LE)
-			bits = 0x04;	/* 16 bit mode */
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKOFF);
-	if (devc->channels == 1)
-		sb_dsp_command(devc, 0xa0 | bits);	/* Mono input */
-	else
-		sb_dsp_command(devc, 0xa8 | bits);	/* Stereo input */
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sbpro_audio_prepare_for_output(int dev, int bsize, int bcount)
-{				/* For SB Pro and Jazz16 */
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-	unsigned char tmp;
-	unsigned char bits = 0;
-
-	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
-		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = devc->bits == 16 ? devc->dma16 : devc->dma8;
-	if (devc->model == MDL_SBPRO)
-		sb_mixer_set_stereo(devc, devc->channels == 2);
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKON);
-
-	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
-	{
-		if (devc->bits == AFMT_S16_LE)
-			bits = 0x04;	/* 16 bit mode */
-
-		if (devc->channels == 1)
-			sb_dsp_command(devc, 0xa0 | bits);	/* Mono output */
-		else
-			sb_dsp_command(devc, 0xa8 | bits);	/* Stereo output */
-		spin_unlock_irqrestore(&devc->lock, flags);
-	}
-	else
-	{
-		spin_unlock_irqrestore(&devc->lock, flags);
-		tmp = sb_getmixer(devc, 0x0e);
-		if (devc->channels == 1)
-			tmp &= ~0x02;
-		else
-			tmp |= 0x02;
-		sb_setmixer(devc, 0x0e, tmp);
-	}
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sbpro_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-		if (speed > 44100)
-			speed = 44100;
-		if (devc->channels > 1 && speed > 22050)
-			speed = 22050;
-		sb201_audio_set_speed(dev, speed);
-	}
-	return devc->speed;
-}
-
-static short sbpro_audio_set_channels(int dev, short channels)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (channels == 1 || channels == 2)
-	{
-		if (channels != devc->channels)
-		{
-			devc->channels = channels;
-			if (devc->model == MDL_SBPRO && devc->channels == 2)
-				sbpro_audio_set_speed(dev, devc->speed);
-		}
-	}
-	return devc->channels;
-}
-
-static int jazz16_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (speed > 0)
-	{
-		int tmp;
-		int s;
-
-		if (speed < 5000)
-			speed = 5000;
-		if (speed > 44100)
-			speed = 44100;
-
-		s = speed * devc->channels;
-
-		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
-
-		tmp = 256 - devc->tconst;
-		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-/*
- * SB16 specific routines
- */
-
-static int sb16_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	int	max_speed = devc->submodel == SUBMDL_ALS100 ? 48000 : 44100;
-
-	if (speed > 0)
-	{
-		if (speed < 5000)
-			speed = 5000;
-
-		if (speed > max_speed)
-			speed = max_speed;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-static unsigned int sb16_audio_set_bits(int dev, unsigned int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (bits != 0)
-	{
-		if (bits == AFMT_U8 || bits == AFMT_S16_LE)
-			devc->bits = bits;
-		else
-			devc->bits = AFMT_U8;
-	}
-
-	return devc->bits;
-}
-
-static int sb16_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex)
-	{
-		audio_devs[dev]->dmap_out->dma =
-			audio_devs[dev]->dmap_in->dma =
-				devc->bits == AFMT_S16_LE ?
-					devc->dma16 : devc->dma8;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma8;
-		audio_devs[dev]->dmap_in->dma = devc->dma16;
-	}
-	else
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma16;
-		audio_devs[dev]->dmap_in->dma = devc->dma8;
-	}
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb16_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex)
-	{
-		audio_devs[dev]->dmap_out->dma =
-			audio_devs[dev]->dmap_in->dma =
-				devc->bits == AFMT_S16_LE ?
-					devc->dma16 : devc->dma8;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma8;
-		audio_devs[dev]->dmap_in->dma = devc->dma16;
-	}
-	else
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma16;
-		audio_devs[dev]->dmap_in->dma = devc->dma8;
-	}
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static void sb16_audio_output_block(int dev, unsigned long buf, int count,
-			int intrflag)
-{
-	unsigned long   flags, cnt;
-	sb_devc        *devc = audio_devs[dev]->devc;
-	unsigned long   bits;
-
-	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
-	{
-		devc->irq_mode = IMODE_OUTPUT;
-		devc->intr_active = 1;
-	}
-	else
-	{
-		devc->irq_mode_16 = IMODE_OUTPUT;
-		devc->intr_active_16 = 1;
-	}
-
-	/* save value */
-	spin_lock_irqsave(&devc->lock, flags);
-	bits = devc->bits;
-	if (devc->fullduplex)
-		devc->bits = (devc->bits == AFMT_S16_LE) ?
-			AFMT_U8 : AFMT_S16_LE;
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	cnt = count;
-	if (devc->bits == AFMT_S16_LE)
-		cnt >>= 1;
-	cnt--;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	sb_dsp_command(devc, 0x41);
-	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
-	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
-
-	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xb6 : 0xc6));
-	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
-			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
-	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
-	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
-
-	/* restore real value after all programming */
-	devc->bits = bits;
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-
-/*
- *	This fails on the Cyrix MediaGX. If you don't have the DMA enabled
- *	before the first sample arrives it locks up. However even if you
- *	do enable the DMA in time you just get DMA timeouts and missing
- *	interrupts and stuff, so for now I've not bothered fixing this either.
- */
- 
-static void sb16_audio_start_input(int dev, unsigned long buf, int count, int intrflag)
-{
-	unsigned long   flags, cnt;
-	sb_devc        *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
-	{
-		devc->irq_mode = IMODE_INPUT;
-		devc->intr_active = 1;
-	}
-	else
-	{
-		devc->irq_mode_16 = IMODE_INPUT;
-		devc->intr_active_16 = 1;
-	}
-
-	cnt = count;
-	if (devc->bits == AFMT_S16_LE)
-		cnt >>= 1;
-	cnt--;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	sb_dsp_command(devc, 0x42);
-	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
-	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
-
-	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xbe : 0xce));
-	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
-			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
-	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
-	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
-
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-static void sb16_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	int bits_16 = bits & devc->irq_mode_16;
-	bits &= devc->irq_mode;
-
-	if (!bits && !bits_16)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		if (bits)
-		{
-			switch (devc->irq_mode)
-			{
-				case IMODE_INPUT:
-					sb16_audio_start_input(dev,
-							devc->trg_buf,
-							devc->trg_bytes,
-							devc->trg_intrflag);
-					break;
-
-				case IMODE_OUTPUT:
-					sb16_audio_output_block(dev,
-							devc->trg_buf,
-							devc->trg_bytes,
-							devc->trg_intrflag);
-					break;
-			}
-		}
-		if (bits_16)
-		{
-			switch (devc->irq_mode_16)
-			{
-				case IMODE_INPUT:
-					sb16_audio_start_input(dev,
-							devc->trg_buf_16,
-							devc->trg_bytes_16,
-							devc->trg_intrflag_16);
-					break;
-
-				case IMODE_OUTPUT:
-					sb16_audio_output_block(dev,
-							devc->trg_buf_16,
-							devc->trg_bytes_16,
-							devc->trg_intrflag_16);
-					break;
-			}
-		}
-	}
-
-	devc->trigger_bits = bits | bits_16;
-}
-
-static unsigned char lbuf8[2048];
-static signed short *lbuf16 = (signed short *)lbuf8;
-#define LBUFCOPYSIZE 1024
-static void
-sb16_copy_from_user(int dev,
-		char *localbuf, int localoffs,
-		const char __user *userbuf, int useroffs,
-		int max_in, int max_out,
-		int *used, int *returned,
-		int len)
-{
-	sb_devc       *devc = audio_devs[dev]->devc;
-	int           i, c, p, locallen;
-	unsigned char *buf8;
-	signed short  *buf16;
-
-	/* if not duplex no conversion */
-	if (!devc->fullduplex)
-	{
-		if (copy_from_user(localbuf + localoffs,
-				   userbuf + useroffs, len))
-			return;
-		*used = len;
-		*returned = len;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		/* 16 -> 8 */
-		/* max_in >> 1, max number of samples in ( 16 bits ) */
-		/* max_out, max number of samples out ( 8 bits ) */
-		/* len, number of samples that will be taken ( 16 bits )*/
-		/* c, count of samples remaining in buffer ( 16 bits )*/
-		/* p, count of samples already processed ( 16 bits )*/
-		len = ( (max_in >> 1) > max_out) ? max_out : (max_in >> 1);
-		c = len;
-		p = 0;
-		buf8 = (unsigned char *)(localbuf + localoffs);
-		while (c)
-		{
-			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
-			/* << 1 in order to get 16 bit samples */
-			if (copy_from_user(lbuf16,
-					   userbuf + useroffs + (p << 1),
-					   locallen << 1))
-				return;
-			for (i = 0; i < locallen; i++)
-			{
-				buf8[p+i] = ~((lbuf16[i] >> 8) & 0xff) ^ 0x80;
-			}
-			c -= locallen; p += locallen;
-		}
-		/* used = ( samples * 16 bits size ) */
-		*used =  max_in  > ( max_out << 1) ? (max_out << 1) : max_in;
-		/* returned = ( samples * 8 bits size ) */
-		*returned = len;
-	}
-	else
-	{
-		/* 8 -> 16 */
-		/* max_in, max number of samples in ( 8 bits ) */
-		/* max_out >> 1, max number of samples out ( 16 bits ) */
-		/* len, number of samples that will be taken ( 8 bits )*/
-		/* c, count of samples remaining in buffer ( 8 bits )*/
-		/* p, count of samples already processed ( 8 bits )*/
-		len = max_in > (max_out >> 1) ? (max_out >> 1) : max_in;
-		c = len;
-		p = 0;
-		buf16 = (signed short *)(localbuf + localoffs);
-		while (c)
-		{
-			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
-			if (copy_from_user(lbuf8,
-					   userbuf+useroffs + p,
-					   locallen))
-				return;
-			for (i = 0; i < locallen; i++)
-			{
-				buf16[p+i] = (~lbuf8[i] ^ 0x80) << 8;
-			}
-	      		c -= locallen; p += locallen;
-		}
-		/* used = ( samples * 8 bits size ) */
-		*used = len;
-		/* returned = ( samples * 16 bits size ) */
-		*returned = len << 1;
-	}
-}
-
-static void
-sb16_audio_mmap(int dev)
-{
-	sb_devc       *devc = audio_devs[dev]->devc;
-	devc->fullduplex = 0;
-}
-
-static struct audio_driver sb1_audio_driver =	/* SB1.x */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb1_audio_trigger,
-	.set_speed		= sb1_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sb20_audio_driver =	/* SB2.0 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sb1_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sb201_audio_driver =		/* SB2.01 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sb201_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sbpro_audio_driver =		/* SB Pro */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sbpro_audio_prepare_for_input,
-	.prepare_for_output	= sbpro_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sbpro_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels
-};
-
-static struct audio_driver jazz16_audio_driver =	/* Jazz16 and SM Wave */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sbpro_audio_prepare_for_input,
-	.prepare_for_output	= sbpro_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= jazz16_audio_set_speed,
-	.set_bits		= sb16_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels
-};
-
-static struct audio_driver sb16_audio_driver =	/* SB16 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb16_audio_prepare_for_input,
-	.prepare_for_output	= sb16_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.copy_user		= sb16_copy_from_user,
-	.trigger		= sb16_audio_trigger,
-	.set_speed		= sb16_audio_set_speed,
-	.set_bits		= sb16_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels,
-	.mmap			= sb16_audio_mmap
-};
-
-void sb_audio_init(sb_devc * devc, char *name, struct module *owner)
-{
-	int audio_flags = 0;
-	int format_mask = AFMT_U8;
-
-	struct audio_driver *driver = &sb1_audio_driver;
-
-	switch (devc->model)
-	{
-		case MDL_SB1:	/* SB1.0 or SB 1.5 */
-			DDB(printk("Will use standard SB1.x driver\n"));
-			audio_flags = DMA_HARDSTOP;
-			break;
-
-		case MDL_SB2:
-			DDB(printk("Will use SB2.0 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sb20_audio_driver;
-			break;
-
-		case MDL_SB201:
-			DDB(printk("Will use SB2.01 (high speed) driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sb201_audio_driver;
-			break;
-
-		case MDL_JAZZ:
-		case MDL_SMW:
-			DDB(printk("Will use Jazz16 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			format_mask |= AFMT_S16_LE;
-			driver = &jazz16_audio_driver;
-			break;
-
-		case MDL_ESS:
-			DDB(printk("Will use ESS ES688/1688 driver\n"));
-			driver = ess_audio_init (devc, &audio_flags, &format_mask);
-			break;
-
-		case MDL_SB16:
-			DDB(printk("Will use SB16 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			format_mask |= AFMT_S16_LE;
-			if (devc->dma8 != devc->dma16 && devc->dma16 != -1)
-			{
-				audio_flags |= DMA_DUPLEX;
-				devc->duplex = 1;
-			}
-			driver = &sb16_audio_driver;
-			break;
-
-		default:
-			DDB(printk("Will use SB Pro driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sbpro_audio_driver;
-	}
-
-	if (owner)
-			driver->owner = owner;
-	
-	if ((devc->dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
-				name,driver, sizeof(struct audio_driver),
-				audio_flags, format_mask, devc,
-				devc->dma8,
-				devc->duplex ? devc->dma16 : devc->dma8)) < 0)
-	{
-		  printk(KERN_ERR "Sound Blaster:  unable to install audio.\n");
-		  return;
-	}
-	audio_devs[devc->dev]->mixer_dev = devc->my_mixerdev;
-	audio_devs[devc->dev]->min_fragment = 5;
-}
diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c
deleted file mode 100644
index 2a92cfe6cfe9..000000000000
--- a/sound/oss/sb_card.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * sound/oss/sb_card.c
- *
- * Detection routine for the ISA Sound Blaster and compatible sound
- * cards.
- *
- * This file is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this
- * software for more info.
- *
- * This is a complete rewrite of the detection routines. This was
- * prompted by the PnP API change during v2.5 and the ugly state the
- * code was in.
- *
- * Copyright (C) by Paul Laufer 2002. Based on code originally by
- * Hannu Savolainen which was modified by many others over the
- * years. Authors specifically mentioned in the previous version were:
- * Daniel Stone, Alessandro Zummo, Jeff Garzik, Arnaldo Carvalho de
- * Melo, Daniel Church, and myself.
- *
- * 02-05-2003 Original Release, Paul Laufer <paul@laufernet.com>
- * 02-07-2003 Bug made it into first release. Take two.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include "sound_config.h"
-#include "sb_mixer.h"
-#include "sb.h"
-#ifdef CONFIG_PNP
-#include <linux/pnp.h>
-#endif /* CONFIG_PNP */
-#include "sb_card.h"
-
-MODULE_DESCRIPTION("OSS Soundblaster ISA PnP and legacy sound driver");
-MODULE_LICENSE("GPL");
-
-extern void *smw_free;
-
-static int __initdata mpu_io	= 0;
-static int __initdata io	= -1;
-static int __initdata irq	= -1;
-static int __initdata dma	= -1;
-static int __initdata dma16	= -1;
-static int __initdata type	= 0; /* Can set this to a specific card type */
-static int __initdata esstype   = 0; /* ESS chip type */
-static int __initdata acer 	= 0; /* Do acer notebook init? */
-static int __initdata sm_games 	= 0; /* Logitech soundman games? */
-
-static struct sb_card_config *legacy = NULL;
-
-#ifdef CONFIG_PNP
-static int pnp_registered;
-static int __initdata pnp       = 1;
-/*
-static int __initdata uart401	= 0;
-*/
-#else
-static int __initdata pnp       = 0;
-#endif
-
-module_param_hw(io, int, ioport, 000);
-MODULE_PARM_DESC(io,       "Soundblaster i/o base address (0x220,0x240,0x260,0x280)");
-module_param_hw(irq, int, irq, 000);
-MODULE_PARM_DESC(irq,	   "IRQ (5,7,9,10)");
-module_param_hw(dma, int, dma, 000);
-MODULE_PARM_DESC(dma,	   "8-bit DMA channel (0,1,3)");
-module_param_hw(dma16, int, dma, 000);
-MODULE_PARM_DESC(dma16,	   "16-bit DMA channel (5,6,7)");
-module_param_hw(mpu_io, int, ioport, 000);
-MODULE_PARM_DESC(mpu_io,   "MPU base address");
-module_param(type, int, 000);
-MODULE_PARM_DESC(type,	   "You can set this to specific card type (doesn't " \
-		 "work with pnp)");
-module_param(sm_games, int, 000);
-MODULE_PARM_DESC(sm_games, "Enable support for Logitech soundman games " \
-		 "(doesn't work with pnp)");
-module_param(esstype, int, 000);
-MODULE_PARM_DESC(esstype,  "ESS chip type (doesn't work with pnp)");
-module_param(acer, int, 000);
-MODULE_PARM_DESC(acer,	   "Set this to detect cards in some ACER notebooks "\
-		 "(doesn't work with pnp)");
-
-#ifdef CONFIG_PNP
-module_param(pnp, int, 000);
-MODULE_PARM_DESC(pnp,     "Went set to 0 will disable detection using PnP. "\
-		  "Default is 1.\n");
-/* Not done yet.... */
-/*
-module_param(uart401, int, 000);
-MODULE_PARM_DESC(uart401,  "When set to 1, will attempt to detect and enable"\
-		 "the mpu on some clones");
-*/
-#endif /* CONFIG_PNP */
-
-/* OSS subsystem card registration shared by PnP and legacy routines */
-static int sb_register_oss(struct sb_card_config *scc, struct sb_module_options *sbmo)
-{
-	if (!request_region(scc->conf.io_base, 16, "soundblaster")) {
-		printk(KERN_ERR "sb: ports busy.\n");
-		kfree(scc);
-		return -EBUSY;
-	}
-
-	if (!sb_dsp_detect(&scc->conf, 0, 0, sbmo)) {
-		release_region(scc->conf.io_base, 16);
-		printk(KERN_ERR "sb: Failed DSP Detect.\n");
-		kfree(scc);
-		return -ENODEV;
-	}
-	if(!sb_dsp_init(&scc->conf, THIS_MODULE)) {
-		printk(KERN_ERR "sb: Failed DSP init.\n");
-		kfree(scc);
-		return -ENODEV;
-	}
-	if(scc->mpucnf.io_base > 0) {
-		scc->mpu = 1;
-		printk(KERN_INFO "sb: Turning on MPU\n");
-		if(!probe_sbmpu(&scc->mpucnf, THIS_MODULE))
-			scc->mpu = 0;
-	}
-
-	return 1;
-}
-
-static void sb_unload(struct sb_card_config *scc)
-{
-	sb_dsp_unload(&scc->conf, 0);
-	if(scc->mpu)
-		unload_sbmpu(&scc->mpucnf);
-	kfree(scc);
-}
-
-/* Register legacy card with OSS subsystem */
-static int __init sb_init_legacy(void)
-{
-	struct sb_module_options sbmo = {0};
-
-	if((legacy = kzalloc(sizeof(struct sb_card_config), GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "sb: Error: Could not allocate memory\n");
-		return -ENOMEM;
-	}
-
-	legacy->conf.io_base      = io;
-	legacy->conf.irq          = irq;
-	legacy->conf.dma          = dma;
-	legacy->conf.dma2         = dma16;
-	legacy->conf.card_subtype = type;
-
-	legacy->mpucnf.io_base = mpu_io;
-	legacy->mpucnf.irq     = -1;
-	legacy->mpucnf.dma     = -1;
-	legacy->mpucnf.dma2    = -1;
-
-	sbmo.esstype  = esstype;
-	sbmo.sm_games = sm_games;
-	sbmo.acer     = acer;
-
-	return sb_register_oss(legacy, &sbmo);
-}
-
-#ifdef CONFIG_PNP
-
-/* Populate the OSS subsystem structures with information from PnP */
-static void sb_dev2cfg(struct pnp_dev *dev, struct sb_card_config *scc)
-{
-	scc->conf.io_base   = -1;
-	scc->conf.irq       = -1;
-	scc->conf.dma       = -1;
-	scc->conf.dma2      = -1;
-	scc->mpucnf.io_base = -1;
-	scc->mpucnf.irq     = -1;
-	scc->mpucnf.dma     = -1;
-	scc->mpucnf.dma2    = -1;
-
-	/* All clones layout their PnP tables differently and some use
-	   different logical devices for the MPU */
-	if(!strncmp("CTL",scc->card_id,3)) {
-		scc->conf.io_base   = pnp_port_start(dev,0);
-		scc->conf.irq       = pnp_irq(dev,0);
-		scc->conf.dma       = pnp_dma(dev,0);
-		scc->conf.dma2      = pnp_dma(dev,1);
-		scc->mpucnf.io_base = pnp_port_start(dev,1);
-		return;
-	}
-	if(!strncmp("tBA",scc->card_id,3)) {
-		scc->conf.io_base   = pnp_port_start(dev,0);
-		scc->conf.irq       = pnp_irq(dev,0);
-		scc->conf.dma       = pnp_dma(dev,0);
-		scc->conf.dma2      = pnp_dma(dev,1);
-		return;
-	}
-	if(!strncmp("ESS",scc->card_id,3)) {
-		scc->conf.io_base   = pnp_port_start(dev,0);
-		scc->conf.irq       = pnp_irq(dev,0);
-		scc->conf.dma       = pnp_dma(dev,0);
-		scc->conf.dma2      = pnp_dma(dev,1);
-	       	scc->mpucnf.io_base = pnp_port_start(dev,2);
-		return;
-	}
-	if(!strncmp("CMI",scc->card_id,3)) {
-		scc->conf.io_base = pnp_port_start(dev,0);
-		scc->conf.irq     = pnp_irq(dev,0);
-		scc->conf.dma     = pnp_dma(dev,0);
-		scc->conf.dma2    = pnp_dma(dev,1);
-		return;
-	}
-	if(!strncmp("RWB",scc->card_id,3)) {
-		scc->conf.io_base = pnp_port_start(dev,0);
-		scc->conf.irq     = pnp_irq(dev,0);
-		scc->conf.dma     = pnp_dma(dev,0);
-		return;
-	}
-	if(!strncmp("ALS",scc->card_id,3)) {
-		if(!strncmp("ALS0007",scc->card_id,7)) {
-			scc->conf.io_base = pnp_port_start(dev,0);
-			scc->conf.irq     = pnp_irq(dev,0);
-			scc->conf.dma     = pnp_dma(dev,0);
-		} else {
-			scc->conf.io_base = pnp_port_start(dev,0);
-			scc->conf.irq     = pnp_irq(dev,0);
-			scc->conf.dma     = pnp_dma(dev,1);
-			scc->conf.dma2    = pnp_dma(dev,0);
-		}
-		return;
-	}
-	if(!strncmp("RTL",scc->card_id,3)) {
-		scc->conf.io_base = pnp_port_start(dev,0);
-		scc->conf.irq     = pnp_irq(dev,0);
-		scc->conf.dma     = pnp_dma(dev,1);
-		scc->conf.dma2    = pnp_dma(dev,0);
-	}
-}
-
-static unsigned int sb_pnp_devices;
-
-/* Probe callback function for the PnP API */
-static int sb_pnp_probe(struct pnp_card_link *card, const struct pnp_card_device_id *card_id)
-{
-	struct sb_card_config *scc;
-	struct sb_module_options sbmo = {0}; /* Default to 0 for PnP */
-	struct pnp_dev *dev = pnp_request_card_device(card, card_id->devs[0].id, NULL);
-	
-	if(!dev){
-		return -EBUSY;
-	}
-
-	if((scc = kzalloc(sizeof(struct sb_card_config), GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "sb: Error: Could not allocate memory\n");
-		return -ENOMEM;
-	}
-
-	printk(KERN_INFO "sb: PnP: Found Card Named = \"%s\", Card PnP id = " \
-	       "%s, Device PnP id = %s\n", card->card->name, card_id->id,
-	       dev->id->id);
-
-	scc->card_id = card_id->id;
-	scc->dev_id = dev->id->id;
-	sb_dev2cfg(dev, scc);
-
-	printk(KERN_INFO "sb: PnP:      Detected at: io=0x%x, irq=%d, " \
-	       "dma=%d, dma16=%d\n", scc->conf.io_base, scc->conf.irq,
-	       scc->conf.dma, scc->conf.dma2);
-
-	pnp_set_card_drvdata(card, scc);
-	sb_pnp_devices++;
-
-	return sb_register_oss(scc, &sbmo);
-}
-
-static void sb_pnp_remove(struct pnp_card_link *card)
-{
-	struct sb_card_config *scc = pnp_get_card_drvdata(card);
-
-	if(!scc)
-		return;
-
-	printk(KERN_INFO "sb: PnP: Removing %s\n", scc->card_id);
-
-	sb_unload(scc);
-}
-
-static struct pnp_card_driver sb_pnp_driver = {
-	.name          = "OSS SndBlstr", /* 16 character limit */
-	.id_table      = sb_pnp_card_table,
-	.probe         = sb_pnp_probe,
-	.remove        = sb_pnp_remove,
-};
-MODULE_DEVICE_TABLE(pnp_card, sb_pnp_card_table);
-#endif /* CONFIG_PNP */
-
-static void sb_unregister_all(void)
-{
-#ifdef CONFIG_PNP
-	if (pnp_registered)
-		pnp_unregister_card_driver(&sb_pnp_driver);
-#endif
-}
-
-static int __init sb_init(void)
-{
-	int lres = 0;
-	int pres = 0;
-
-	printk(KERN_INFO "sb: Init: Starting Probe...\n");
-
-	if(io != -1 && irq != -1 && dma != -1) {
-		printk(KERN_INFO "sb: Probing legacy card with io=%x, "\
-		       "irq=%d, dma=%d, dma16=%d\n",io, irq, dma, dma16);
-		lres = sb_init_legacy();
-	} else if((io != -1 || irq != -1 || dma != -1) ||
-		  (!pnp && (io == -1 && irq == -1 && dma == -1)))
-		printk(KERN_ERR "sb: Error: At least io, irq, and dma "\
-		       "must be set for legacy cards.\n");
-
-#ifdef CONFIG_PNP
-	if(pnp) {
-		int err = pnp_register_card_driver(&sb_pnp_driver);
-		if (!err)
-			pnp_registered = 1;
-		pres = sb_pnp_devices;
-	}
-#endif
-	printk(KERN_INFO "sb: Init: Done\n");
-
-	/* If either PnP or Legacy registered a card then return
-	 * success */
-	if (pres == 0 && lres <= 0) {
-		sb_unregister_all();
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static void __exit sb_exit(void)
-{
-	printk(KERN_INFO "sb: Unloading...\n");
-
-	/* Unload legacy card */
-	if (legacy) {
-		printk (KERN_INFO "sb: Unloading legacy card\n");
-		sb_unload(legacy);
-	}
-
-	sb_unregister_all();
-
-	vfree(smw_free);
-	smw_free = NULL;
-}
-
-module_init(sb_init);
-module_exit(sb_exit);
diff --git a/sound/oss/sb_card.h b/sound/oss/sb_card.h
deleted file mode 100644
index 5535cff800df..000000000000
--- a/sound/oss/sb_card.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * sound/oss/sb_card.h
- *
- * This file is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this
- * software for more info.
- *
- * 02-05-2002 Original Release, Paul Laufer <paul@laufernet.com>
- */
-
-struct sb_card_config {
-	struct address_info conf;
-	struct address_info mpucnf;
-	const  char         *card_id;
-	const  char         *dev_id;
-	int                 mpu;
-};
-
-#ifdef CONFIG_PNP
-
-/*
- * SoundBlaster PnP tables and structures.
- */
-
-/* Card PnP ID Table */
-static struct pnp_card_device_id sb_pnp_card_table[] = {
-	/* Sound Blaster 16 */
-	{.id = "CTL0024", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0025", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0026", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0027", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0028", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0029", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL002a", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL002b", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL002c", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL00ed", .driver_data = 0, .devs = { {.id="CTL0041"}, } },
-	/* Sound Blaster 16 */
-	{.id = "CTL0086", .driver_data = 0, .devs = { {.id="CTL0041"}, } },
-	/* Sound Blaster Vibra16S */
-	{.id = "CTL0051", .driver_data = 0, .devs = { {.id="CTL0001"}, } },
-	/* Sound Blaster Vibra16C */
-	{.id = "CTL0070", .driver_data = 0, .devs = { {.id="CTL0001"}, } },
-	/* Sound Blaster Vibra16CL */
-	{.id = "CTL0080", .driver_data = 0, .devs = { {.id="CTL0041"}, } },
-	/* Sound Blaster Vibra16CL */
-	{.id = "CTL00F0", .driver_data = 0, .devs = { {.id="CTL0043"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0039", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0042", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0043", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0044", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0045", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0046", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0047", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0048", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL0054", .driver_data = 0, .devs = { {.id="CTL0031"}, } },
-	/* Sound Blaster AWE 32 */
-	{.id = "CTL009C", .driver_data = 0, .devs = { {.id="CTL0041"}, } },
-	/* Createive SB32 PnP */
-	{.id = "CTL009F", .driver_data = 0, .devs = { {.id="CTL0041"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL009D", .driver_data = 0, .devs = { {.id="CTL0042"}, } },
-	/* Sound Blaster AWE 64 Gold */
-	{.id = "CTL009E", .driver_data = 0, .devs = { {.id="CTL0044"}, } },
-	/* Sound Blaster AWE 64 Gold */
-	{.id = "CTL00B2", .driver_data = 0, .devs = { {.id="CTL0044"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00C1", .driver_data = 0, .devs = { {.id="CTL0042"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00C3", .driver_data = 0, .devs = { {.id="CTL0045"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00C5", .driver_data = 0, .devs = { {.id="CTL0045"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00C7", .driver_data = 0, .devs = { {.id="CTL0045"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00E4", .driver_data = 0, .devs = { {.id="CTL0045"}, } },
-	/* Sound Blaster AWE 64 */
-	{.id = "CTL00E9", .driver_data = 0, .devs = { {.id="CTL0045"}, } },
-	/* ESS 1868 */
-	{.id = "ESS0968", .driver_data = 0, .devs = { {.id="ESS0968"}, } },
-	/* ESS 1868 */
-	{.id = "ESS1868", .driver_data = 0, .devs = { {.id="ESS1868"}, } },
-	/* ESS 1868 */
-	{.id = "ESS1868", .driver_data = 0, .devs = { {.id="ESS8611"}, } },
-	/* ESS 1869 PnP AudioDrive */
-	{.id = "ESS0003", .driver_data = 0, .devs = { {.id="ESS1869"}, } },
-	/* ESS 1869 */
-	{.id = "ESS1869", .driver_data = 0, .devs = { {.id="ESS1869"}, } },
-	/* ESS 1878 */
-	{.id = "ESS1878", .driver_data = 0, .devs = { {.id="ESS1878"}, } },
-	/* ESS 1879 */
-	{.id = "ESS1879", .driver_data = 0, .devs = { {.id="ESS1879"}, } },
-	/* CMI 8330 SoundPRO */
-	{.id = "CMI0001", .driver_data = 0, .devs = { {.id="@X@0001"},
-						     {.id="@H@0001"},
-						     {.id="@@@0001"}, } },
-	/* Diamond DT0197H */
-	{.id = "RWR1688", .driver_data = 0, .devs = { {.id="@@@0001"},
-						     {.id="@X@0001"},
-						     {.id="@H@0001"}, } },
-	/* ALS007 */
-	{.id = "ALS0007", .driver_data = 0, .devs = { {.id="@@@0001"},
-						     {.id="@X@0001"},
-						     {.id="@H@0001"}, } },
-	/* ALS100 */
-	{.id = "ALS0001", .driver_data = 0, .devs = { {.id="@@@0001"},
-						     {.id="@X@0001"},
-						     {.id="@H@0001"}, } },
-	/* ALS110 */
-	{.id = "ALS0110", .driver_data = 0, .devs = { {.id="@@@1001"},
-						     {.id="@X@1001"},
-						     {.id="@H@0001"}, } },
-	/* ALS120 */
-	{.id = "ALS0120", .driver_data = 0, .devs = { {.id="@@@2001"},
-						     {.id="@X@2001"},
-						     {.id="@H@0001"}, } },
-	/* ALS200 */
-	{.id = "ALS0200", .driver_data = 0, .devs = { {.id="@@@0020"},
-						     {.id="@X@0030"},
-						     {.id="@H@0001"}, } },
-	/* ALS200 */
-	{.id = "RTL3000", .driver_data = 0, .devs = { {.id="@@@2001"},
-						     {.id="@X@2001"},
-						     {.id="@H@0001"}, } },
-	/* Sound Blaster 16 (Virtual PC 2004) */
-	{.id = "tBA03b0", .driver_data = 0, .devs = { {.id="PNPb003"}, } },
-	/* -end- */
-	{.id = "", }
-};
-
-#endif
diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c
deleted file mode 100644
index 3d50fb4236ed..000000000000
--- a/sound/oss/sb_common.c
+++ /dev/null
@@ -1,1287 +0,0 @@
-/*
- * sound/oss/sb_common.c
- *
- * Common routines for Sound Blaster compatible cards.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts
- *                       for full duplex support ( only sb16 by now )
- * Rolf Fokkens:	 Added (BETA?) support for ES1887 chips.
- * (fokkensr@vertis.nl)	 Which means: You can adjust the recording levels.
- *
- * 2000/01/18 - separated sb_card and sb_common -
- * Jeff Garzik <jgarzik@pobox.com>
- *
- * 2000/09/18 - got rid of attach_uart401
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- *
- * 2001/01/26 - replaced CLI/STI with spinlocks
- * Chris Rankin <rankinc@zipworld.com.au>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#include "sound_config.h"
-#include "sound_firmware.h"
-
-#include "mpu401.h"
-
-#include "sb_mixer.h"
-#include "sb.h"
-#include "sb_ess.h"
-
-/*
- * global module flag
- */
-
-int sb_be_quiet;
-
-static sb_devc *detected_devc;	/* For communication from probe to init */
-static sb_devc *last_devc;	/* For MPU401 initialization */
-
-static unsigned char jazz_irq_bits[] = {
-	0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6
-};
-
-static unsigned char jazz_dma_bits[] = {
-	0, 1, 0, 2, 0, 3, 0, 4
-};
-
-void *smw_free;
-
-/*
- * Jazz16 chipset specific control variables
- */
-
-static int jazz16_base;			/* Not detected */
-static unsigned char jazz16_bits;	/* I/O relocation bits */
-static DEFINE_SPINLOCK(jazz16_lock);
-
-/*
- * Logitech Soundman Wave specific initialization code
- */
-
-#ifdef SMW_MIDI0001_INCLUDED
-#include "smw-midi0001.h"
-#else
-static unsigned char *smw_ucode;
-static int      smw_ucodeLen;
-
-#endif
-
-static sb_devc *last_sb;		/* Last sb loaded */
-
-int sb_dsp_command(sb_devc * devc, unsigned char val)
-{
-	int i;
-	unsigned long limit;
-
-	limit = jiffies + HZ / 10;	/* Timeout */
-	
-	/*
-	 * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes
-	 * called while interrupts are disabled. This means that the timer is
-	 * disabled also. However the timeout situation is a abnormal condition.
-	 * Normally the DSP should be ready to accept commands after just couple of
-	 * loops.
-	 */
-
-	for (i = 0; i < 500000 && (limit-jiffies)>0; i++)
-	{
-		if ((inb(DSP_STATUS) & 0x80) == 0)
-		{
-			outb((val), DSP_COMMAND);
-			return 1;
-		}
-	}
-	printk(KERN_WARNING "Sound Blaster:  DSP command(%x) timeout.\n", val);
-	return 0;
-}
-
-int sb_dsp_get_byte(sb_devc * devc)
-{
-	int i;
-
-	for (i = 1000; i; i--)
-	{
-		if (inb(DSP_DATA_AVAIL) & 0x80)
-			return inb(DSP_READ);
-	}
-	return 0xffff;
-}
-
-static void sb_intr (sb_devc *devc)
-{
-	int status;
-	unsigned char   src = 0xff;
-
-	if (devc->model == MDL_SB16)
-	{
-		src = sb_getmixer(devc, IRQ_STAT);	/* Interrupt source register */
-
-		if (src & 4)						/* MPU401 interrupt */
-			if(devc->midi_irq_cookie)
-				uart401intr(devc->irq, devc->midi_irq_cookie);
-
-		if (!(src & 3))
-			return;	/* Not a DSP interrupt */
-	}
-	if (devc->intr_active && (!devc->fullduplex || (src & 0x01)))
-	{
-		switch (devc->irq_mode)
-		{
-			case IMODE_OUTPUT:
-				DMAbuf_outputintr(devc->dev, 1);
-				break;
-
-			case IMODE_INPUT:
-				DMAbuf_inputintr(devc->dev);
-				break;
-
-			case IMODE_INIT:
-				break;
-
-			case IMODE_MIDI:
-				sb_midi_interrupt(devc);
-				break;
-
-			default:
-				/* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
-				;
-		}
-	}
-	else if (devc->intr_active_16 && (src & 0x02))
-	{
-		switch (devc->irq_mode_16)
-		{
-			case IMODE_OUTPUT:
-				DMAbuf_outputintr(devc->dev, 1);
-				break;
-
-			case IMODE_INPUT:
-				DMAbuf_inputintr(devc->dev);
-				break;
-
-			case IMODE_INIT:
-				break;
-
-			default:
-				/* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
-				;
-		}
-	}
-	/*
-	 * Acknowledge interrupts 
-	 */
-
-	if (src & 0x01)
-		status = inb(DSP_DATA_AVAIL);
-
-	if (devc->model == MDL_SB16 && src & 0x02)
-		status = inb(DSP_DATA_AVL16);
-}
-
-static void pci_intr(sb_devc *devc)
-{
-	int src = inb(devc->pcibase+0x1A);
-	src&=3;
-	if(src)
-		sb_intr(devc);
-}
-
-static irqreturn_t sbintr(int irq, void *dev_id)
-{
-	sb_devc *devc = dev_id;
-
-	devc->irq_ok = 1;
-
-	switch (devc->model) {
-	case MDL_ESSPCI:
-		pci_intr (devc);
-		break;
-		
-	case MDL_ESS:
-		ess_intr (devc);
-		break;
-	default:
-		sb_intr (devc);
-		break;
-	}
-	return IRQ_HANDLED;
-}
-
-int sb_dsp_reset(sb_devc * devc)
-{
-	int loopc;
-
-	if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
-
-	/* This is only for non-ESS chips */
-
-	outb(1, DSP_RESET);
-
-	udelay(10);
-	outb(0, DSP_RESET);
-	udelay(30);
-
-	for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
-
-	if (inb(DSP_READ) != 0xAA)
-	{
-		DDB(printk("sb: No response to RESET\n"));
-		return 0;	/* Sorry */
-	}
-
-	return 1;
-}
-
-static void dsp_get_vers(sb_devc * devc)
-{
-	int i;
-
-	unsigned long   flags;
-
-	DDB(printk("Entered dsp_get_vers()\n"));
-	spin_lock_irqsave(&devc->lock, flags);
-	devc->major = devc->minor = 0;
-	sb_dsp_command(devc, 0xe1);	/* Get version */
-
-	for (i = 100000; i; i--)
-	{
-		if (inb(DSP_DATA_AVAIL) & 0x80)
-		{
-			if (devc->major == 0)
-				devc->major = inb(DSP_READ);
-			else
-			{
-				devc->minor = inb(DSP_READ);
-				break;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&devc->lock, flags);
-	DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor));
-}
-
-static int sb16_set_dma_hw(sb_devc * devc)
-{
-	int bits;
-
-	if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3)
-	{
-		printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8);
-		return 0;
-	}
-	bits = (1 << devc->dma8);
-
-	if (devc->dma16 >= 5 && devc->dma16 <= 7)
-		bits |= (1 << devc->dma16);
-
-	sb_setmixer(devc, DMA_NR, bits);
-	return 1;
-}
-
-static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config)
-{
-	/*
-	 * This routine initializes new MIDI port setup register of SB Vibra (CT2502).
-	 */
-	unsigned char   bits = sb_getmixer(devc, 0x84) & ~0x06;
-
-	switch (hw_config->io_base)
-	{
-		case 0x300:
-			sb_setmixer(devc, 0x84, bits | 0x04);
-			break;
-
-		case 0x330:
-			sb_setmixer(devc, 0x84, bits | 0x00);
-			break;
-
-		default:
-			sb_setmixer(devc, 0x84, bits | 0x02);		/* Disable MPU */
-			printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base);
-	}
-}
-
-static int sb16_set_irq_hw(sb_devc * devc, int level)
-{
-	int ival;
-
-	switch (level)
-	{
-		case 5:
-			ival = 2;
-			break;
-		case 7:
-			ival = 4;
-			break;
-		case 9:
-			ival = 1;
-			break;
-		case 10:
-			ival = 8;
-			break;
-		default:
-			printk(KERN_ERR "SB16: Invalid IRQ%d\n", level);
-			return 0;
-	}
-	sb_setmixer(devc, IRQ_NR, ival);
-	return 1;
-}
-
-static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config)
-{
-	unsigned char bits = 0;
-	unsigned long flags;
-
-	if (jazz16_base != 0 && jazz16_base != hw_config->io_base)
-		return;
-
-	switch (hw_config->io_base)
-	{
-		case 0x220:
-			bits = 1;
-			break;
-		case 0x240:
-			bits = 2;
-			break;
-		case 0x260:
-			bits = 3;
-			break;
-		default:
-			return;
-	}
-	bits = jazz16_bits = bits << 5;
-	jazz16_base = hw_config->io_base;
-
-	/*
-	 *	Magic wake up sequence by writing to 0x201 (aka Joystick port)
-	 */
-	spin_lock_irqsave(&jazz16_lock, flags);
-	outb((0xAF), 0x201);
-	outb((0x50), 0x201);
-	outb((bits), 0x201);
-	spin_unlock_irqrestore(&jazz16_lock, flags);
-}
-
-static int init_Jazz16(sb_devc * devc, struct address_info *hw_config)
-{
-	char name[100];
-	/*
-	 * First try to check that the card has Jazz16 chip. It identifies itself
-	 * by returning 0x12 as response to DSP command 0xfa.
-	 */
-
-	if (!sb_dsp_command(devc, 0xfa))
-		return 0;
-
-	if (sb_dsp_get_byte(devc) != 0x12)
-		return 0;
-
-	/*
-	 * OK so far. Now configure the IRQ and DMA channel used by the card.
-	 */
-	if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0)
-	{
-		printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq);
-		return 0;
-	}
-	if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0)
-	{
-		  printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma);
-		  return 0;
-	}
-	if (hw_config->dma2 < 0)
-	{
-		printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n");
-		return 0;
-	}
-	if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0)
-	{
-		printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2);
-		return 0;
-	}
-	devc->dma16 = hw_config->dma2;
-
-	if (!sb_dsp_command(devc, 0xfb))
-		return 0;
-
-	if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] |
-			(jazz_dma_bits[hw_config->dma2] << 4)))
-		return 0;
-
-	if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq]))
-		return 0;
-
-	/*
-	 * Now we have configured a standard Jazz16 device. 
-	 */
-	devc->model = MDL_JAZZ;
-	strcpy(name, "Jazz16");
-
-	hw_config->name = "Jazz16";
-	devc->caps |= SB_NO_MIDI;
-	return 1;
-}
-
-static void relocate_ess1688(sb_devc * devc)
-{
-	unsigned char bits;
-
-	switch (devc->base)
-	{
-		case 0x220:
-			bits = 0x04;
-			break;
-		case 0x230:
-			bits = 0x05;
-			break;
-		case 0x240:
-			bits = 0x06;
-			break;
-		case 0x250:
-			bits = 0x07;
-			break;
-		default:
-			return;	/* Wrong port */
-	}
-
-	DDB(printk("Doing ESS1688 address selection\n"));
-	
-	/*
-	 * ES1688 supports two alternative ways for software address config.
-	 * First try the so called Read-Sequence-Key method.
-	 */
-
-	/* Reset the sequence logic */
-	inb(0x229);
-	inb(0x229);
-	inb(0x229);
-
-	/* Perform the read sequence */
-	inb(0x22b);
-	inb(0x229);
-	inb(0x22b);
-	inb(0x229);
-	inb(0x229);
-	inb(0x22b);
-	inb(0x229);
-
-	/* Select the base address by reading from it. Then probe using the port. */
-	inb(devc->base);
-	if (sb_dsp_reset(devc))	/* Bingo */
-		return;
-
-#if 0				/* This causes system lockups (Nokia 386/25 at least) */
-	/*
-	 * The last resort is the system control register method.
-	 */
-
-	outb((0x00), 0xfb);	/* 0xFB is the unlock register */
-	outb((0x00), 0xe0);	/* Select index 0 */
-	outb((bits), 0xe1);	/* Write the config bits */
-	outb((0x00), 0xf9);	/* 0xFB is the lock register */
-#endif
-}
-
-int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo)
-{
-	sb_devc sb_info;
-	sb_devc *devc = &sb_info;
-
-	memset((char *) &sb_info, 0, sizeof(sb_info));	/* Zero everything */
-
-	/* Copy module options in place */
-	if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options));
-
-	sb_info.my_mididev = -1;
-	sb_info.my_mixerdev = -1;
-	sb_info.dev = -1;
-
-	/*
-	 * Initialize variables 
-	 */
-	
-	DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base));
-
-	spin_lock_init(&devc->lock);
-	devc->type = hw_config->card_subtype;
-
-	devc->base = hw_config->io_base;
-	devc->irq = hw_config->irq;
-	devc->dma8 = hw_config->dma;
-
-	devc->dma16 = -1;
-	devc->pcibase = pciio;
-	
-	if(pci == SB_PCI_ESSMAESTRO)
-	{
-		devc->model = MDL_ESSPCI;
-		devc->caps |= SB_PCI_IRQ;
-		hw_config->driver_use_1 |= SB_PCI_IRQ;
-		hw_config->card_subtype	= MDL_ESSPCI;
-	}
-	
-	if(pci == SB_PCI_YAMAHA)
-	{
-		devc->model = MDL_YMPCI;
-		devc->caps |= SB_PCI_IRQ;
-		hw_config->driver_use_1 |= SB_PCI_IRQ;
-		hw_config->card_subtype	= MDL_YMPCI;
-		
-		printk("Yamaha PCI mode.\n");
-	}
-	
-	if (devc->sbmo.acer)
-	{
-		unsigned long flags;
-
-		spin_lock_irqsave(&devc->lock, flags);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x0b);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x0b);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x0b);
-		inb(devc->base + 0x09);
-		inb(devc->base + 0x00);
-		spin_unlock_irqrestore(&devc->lock, flags);
-	}
-	/*
-	 * Detect the device
-	 */
-
-	if (sb_dsp_reset(devc))
-		dsp_get_vers(devc);
-	else
-		devc->major = 0;
-
-	if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW)
-		if (devc->major == 0 || (devc->major == 3 && devc->minor == 1))
-			relocate_Jazz16(devc, hw_config);
-
-	if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0))
-		relocate_ess1688(devc);
-
-	if (!sb_dsp_reset(devc))
-	{
-		DDB(printk("SB reset failed\n"));
-#ifdef MODULE
-		printk(KERN_INFO "sb: dsp reset failed.\n");
-#endif
-		return 0;
-	}
-	if (devc->major == 0)
-		dsp_get_vers(devc);
-
-	if (devc->major == 3 && devc->minor == 1)
-	{
-		if (devc->type == MDL_AZTECH)		/* SG Washington? */
-		{
-			if (sb_dsp_command(devc, 0x09))
-				if (sb_dsp_command(devc, 0x00))	/* Enter WSS mode */
-				{
-					int i;
-
-					/* Have some delay */
-					for (i = 0; i < 10000; i++)
-						inb(DSP_DATA_AVAIL);
-					devc->caps = SB_NO_AUDIO | SB_NO_MIDI;	/* Mixer only */
-					devc->model = MDL_AZTECH;
-				}
-		}
-	}
-	
-	if(devc->type == MDL_ESSPCI)
-		devc->model = MDL_ESSPCI;
-		
-	if(devc->type == MDL_YMPCI)
-	{
-		printk("YMPCI selected\n");
-		devc->model = MDL_YMPCI;
-	}
-		
-	/*
-	 * Save device information for sb_dsp_init()
-	 */
-
-
-	detected_devc = kmemdup(devc, sizeof(sb_devc), GFP_KERNEL);
-	if (detected_devc == NULL)
-	{
-		printk(KERN_ERR "sb: Can't allocate memory for device information\n");
-		return 0;
-	}
-	MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base));
-	return 1;
-}
-
-int sb_dsp_init(struct address_info *hw_config, struct module *owner)
-{
-	sb_devc *devc;
-	char name[100];
-	extern int sb_be_quiet;
-	int	mixer22, mixer30;
-	
-/*
- * Check if we had detected a SB device earlier
- */
-	DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base));
-	name[0] = 0;
-
-	if (detected_devc == NULL)
-	{
-		MDB(printk("No detected device\n"));
-		return 0;
-	}
-	devc = detected_devc;
-	detected_devc = NULL;
-
-	if (devc->base != hw_config->io_base)
-	{
-		DDB(printk("I/O port mismatch\n"));
-		release_region(devc->base, 16);
-		return 0;
-	}
-	/*
-	 * Now continue initialization of the device
-	 */
-
-	devc->caps = hw_config->driver_use_1;
-
-	if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0)
-	{			/* IRQ setup */
-		
-		/*
-		 *	ESS PCI cards do shared PCI IRQ stuff. Since they
-		 *	will get shared PCI irq lines we must cope.
-		 */
-		 
-		int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
-		
-		if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
-		{
-			printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq);
-			release_region(devc->base, 16);
-			return 0;
-		}
-		devc->irq_ok = 0;
-
-		if (devc->major == 4)
-			if (!sb16_set_irq_hw(devc, devc->irq))	/* Unsupported IRQ */
-			{
-				free_irq(devc->irq, devc);
-				release_region(devc->base, 16);
-				return 0;
-			}
-		if ((devc->type == 0 || devc->type == MDL_ESS) &&
-			devc->major == 3 && devc->minor == 1)
-		{		/* Handle various chipsets which claim they are SB Pro compatible */
-			if ((devc->type != 0 && devc->type != MDL_ESS) ||
-				!ess_init(devc, hw_config))
-			{
-				if ((devc->type != 0 && devc->type != MDL_JAZZ &&
-					 devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config))
-				{
-					DDB(printk("This is a genuine SB Pro\n"));
-				}
-			}
-		}
-		if (devc->major == 4 && devc->minor <= 11 )	/* Won't work */
-			devc->irq_ok = 1;
-		else
-		{
-			int n;
-
-			for (n = 0; n < 3 && devc->irq_ok == 0; n++)
-			{
-				if (sb_dsp_command(devc, 0xf2))	/* Cause interrupt immediately */
-				{
-					int i;
-
-					for (i = 0; !devc->irq_ok && i < 10000; i++);
-				}
-			}
-			if (!devc->irq_ok)
-				printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq);
-			else
-			{
-				DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq));
-			}
-		}
-	}			/* IRQ setup */
-
-	last_sb = devc;
-	
-	switch (devc->major)
-	{
-		case 1:		/* SB 1.0 or 1.5 */
-			devc->model = hw_config->card_subtype = MDL_SB1;
-			break;
-
-		case 2:		/* SB 2.x */
-			if (devc->minor == 0)
-				devc->model = hw_config->card_subtype = MDL_SB2;
-			else
-				devc->model = hw_config->card_subtype = MDL_SB201;
-			break;
-
-		case 3:		/* SB Pro and most clones */
-			switch (devc->model) {
-			case 0:
-				devc->model = hw_config->card_subtype = MDL_SBPRO;
-				if (hw_config->name == NULL)
-					hw_config->name = "Sound Blaster Pro (8 BIT ONLY)";
-				break;
-			case MDL_ESS:
-				ess_dsp_init(devc, hw_config);
-				break;
-			}
-			break;
-
-		case 4:
-			devc->model = hw_config->card_subtype = MDL_SB16;
-			/* 
-			 * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0
-			 * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas
-			 * a "standard" SB16 doesn't have a register at 0x4c.  ALS100 actively
-			 * updates register 0x22 whenever 0x30 changes, as per the SB16 spec.
-			 * Since ALS007 doesn't, this can be used to differentiate the 2 cards.
-			 */
-			if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c)) 
-			{
-				mixer30 = sb_getmixer(devc,0x30);
-				sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f);
-				sb_setmixer(devc,0x30,0xff);
-				/* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */
-				/* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10.     */
-				if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10)) 
-				{
-					devc->submodel = SUBMDL_ALS100;
-					if (hw_config->name == NULL)
-						hw_config->name = "Sound Blaster 16 (ALS-100)";
-        			}
-        			else
-        			{
-        				sb_setmixer(devc,0x3c,0x1f);    /* Enable all inputs */
-					sb_setmixer(devc,0x4c,0x1f);
-					sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */
-					devc->submodel = SUBMDL_ALS007;
-					if (hw_config->name == NULL)
-						hw_config->name = "Sound Blaster 16 (ALS-007)";
-				}
-				sb_setmixer(devc,0x30,mixer30);
-			}
-			else if (hw_config->name == NULL)
-				hw_config->name = "Sound Blaster 16";
-
-			if (hw_config->dma2 == -1)
-				devc->dma16 = devc->dma8;
-			else if (hw_config->dma2 < 5 || hw_config->dma2 > 7)
-			{
-				printk(KERN_WARNING  "SB16: Bad or missing 16 bit DMA channel\n");
-				devc->dma16 = devc->dma8;
-			}
-			else
-				devc->dma16 = hw_config->dma2;
-
-			if(!sb16_set_dma_hw(devc)) {
-				free_irq(devc->irq, devc);
-			        release_region(hw_config->io_base, 16);
-				return 0;
-			}
-
-			devc->caps |= SB_NO_MIDI;
-	}
-
-	if (!(devc->caps & SB_NO_MIXER))
-		if (devc->major == 3 || devc->major == 4)
-			sb_mixer_init(devc, owner);
-
-	if (!(devc->caps & SB_NO_MIDI))
-		sb_dsp_midi_init(devc, owner);
-
-	if (hw_config->name == NULL)
-		hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)";
-
-	sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor);
-	conf_printf(name, hw_config);
-
-	/*
-	 * Assuming that a sound card is Sound Blaster (compatible) is the most common
-	 * configuration error and the mother of all problems. Usually sound cards
-	 * emulate SB Pro but in addition they have a 16 bit native mode which should be
-	 * used in Unix. See Readme.cards for more information about configuring OSS/Free
-	 * properly.
-	 */
-	if (devc->model <= MDL_SBPRO)
-	{
-		if (devc->major == 3 && devc->minor != 1)	/* "True" SB Pro should have v3.1 (rare ones may have 3.2). */
-		{
-			printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n");
-			printk(KERN_INFO "In many cases there is another way to configure OSS so that\n");
-			printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n");
-			printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n");
-		}
-		else if (!sb_be_quiet && devc->model == MDL_SBPRO)
-		{
-			printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor);
-			printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n");
-			printk(KERN_INFO "is incorrectly configured.\n");
-		}
-	}
-	hw_config->card_subtype = devc->model;
-	hw_config->slots[0]=devc->dev;
-	last_devc = devc;	/* For SB MPU detection */
-
-	if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0)
-	{
-		if (sound_alloc_dma(devc->dma8, "SoundBlaster8"))
-		{
-			printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8);
-		}
-		if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
-		{
-			if (sound_alloc_dma(devc->dma16, "SoundBlaster16"))
-				printk(KERN_WARNING "Sound Blaster:  can't allocate 16 bit DMA channel %d.\n", devc->dma16);
-		}
-		sb_audio_init(devc, name, owner);
-		hw_config->slots[0]=devc->dev;
-	}
-	else
-	{
-		MDB(printk("Sound Blaster:  no audio devices found.\n"));
-	}
-	return 1;
-}
-
-/* if (sbmpu) below we allow mpu401 to manage the midi devs
-   otherwise we have to unload them. (Andrzej Krzysztofowicz) */
-   
-void sb_dsp_unload(struct address_info *hw_config, int sbmpu)
-{
-	sb_devc *devc;
-
-	devc = audio_devs[hw_config->slots[0]]->devc;
-
-	if (devc && devc->base == hw_config->io_base)
-	{
-		if ((devc->model & MDL_ESS) && devc->pcibase)
-			release_region(devc->pcibase, 8);
-
-		release_region(devc->base, 16);
-
-		if (!(devc->caps & SB_NO_AUDIO))
-		{
-			sound_free_dma(devc->dma8);
-			if (devc->dma16 >= 0)
-				sound_free_dma(devc->dma16);
-		}
-		if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI))
-		{
-			if (devc->irq > 0)
-				free_irq(devc->irq, devc);
-
-			sb_mixer_unload(devc);
-			/* We don't have to do this bit any more the UART401 is its own
-				master  -- Krzysztof Halasa */
-			/* But we have to do it, if UART401 is not detected */
-			if (!sbmpu)
-				sound_unload_mididev(devc->my_mididev);
-			sound_unload_audiodev(devc->dev);
-		}
-		kfree(devc);
-	}
-	else
-		release_region(hw_config->io_base, 16);
-
-	kfree(detected_devc);
-}
-
-/*
- *	Mixer access routines
- *
- *	ES1887 modifications: some mixer registers reside in the
- *	range above 0xa0. These must be accessed in another way.
- */
-
-void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value)
-{
-	unsigned long flags;
-
-	if (devc->model == MDL_ESS) {
-		ess_setmixer (devc, port, value);
-		return;
-	}
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
-	udelay(20);
-	outb(((unsigned char) (value & 0xff)), MIXER_DATA);
-	udelay(20);
-
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-unsigned int sb_getmixer(sb_devc * devc, unsigned int port)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	if (devc->model == MDL_ESS) return ess_getmixer (devc, port);
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
-	udelay(20);
-	val = inb(MIXER_DATA);
-	udelay(20);
-
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	return val;
-}
-
-void sb_chgmixer
-	(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
-{
-	int value;
-
-	value = sb_getmixer(devc, reg);
-	value = (value & ~mask) | (val & mask);
-	sb_setmixer(devc, reg, value);
-}
-
-/*
- *	MPU401 MIDI initialization.
- */
-
-static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&jazz16_lock, flags);  /* NOT the SB card? */
-
-	outb((addr & 0xff), base + 1);	/* Low address bits */
-	outb((addr >> 8), base + 2);	/* High address bits */
-	outb((val), base);	/* Data */
-
-	spin_unlock_irqrestore(&jazz16_lock, flags);
-}
-
-static unsigned char smw_getmem(sb_devc * devc, int base, int addr)
-{
-	unsigned long flags;
-	unsigned char val;
-
-	spin_lock_irqsave(&jazz16_lock, flags);  /* NOT the SB card? */
-
-	outb((addr & 0xff), base + 1);	/* Low address bits */
-	outb((addr >> 8), base + 2);	/* High address bits */
-	val = inb(base);	/* Data */
-
-	spin_unlock_irqrestore(&jazz16_lock, flags);
-	return val;
-}
-
-static int smw_midi_init(sb_devc * devc, struct address_info *hw_config)
-{
-	int mpu_base = hw_config->io_base;
-	int mp_base = mpu_base + 4;		/* Microcontroller base */
-	int i;
-	unsigned char control;
-
-
-	/*
-	 *  Reset the microcontroller so that the RAM can be accessed
-	 */
-
-	control = inb(mpu_base + 7);
-	outb((control | 3), mpu_base + 7);	/* Set last two bits to 1 (?) */
-	outb(((control & 0xfe) | 2), mpu_base + 7);	/* xxxxxxx0 resets the mc */
-
-	mdelay(3);	/* Wait at least 1ms */
-
-	outb((control & 0xfc), mpu_base + 7);	/* xxxxxx00 enables RAM */
-
-	/*
-	 *  Detect microcontroller by probing the 8k RAM area
-	 */
-	smw_putmem(devc, mp_base, 0, 0x00);
-	smw_putmem(devc, mp_base, 1, 0xff);
-	udelay(10);
-
-	if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff)
-	{
-		DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1)));
-		return 0;	/* No RAM */
-	}
-	/*
-	 *  There is RAM so assume it's really a SM Wave
-	 */
-
-	devc->model = MDL_SMW;
-	smw_mixer_init(devc);
-
-#ifdef MODULE
-	if (!smw_ucode)
-	{
-		smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode);
-		smw_free = smw_ucode;
-	}
-#endif
-	if (smw_ucodeLen > 0)
-	{
-		if (smw_ucodeLen != 8192)
-		{
-			printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n");
-			return 1;
-		}
-		/*
-		 *  Download microcode
-		 */
-
-		for (i = 0; i < 8192; i++)
-			smw_putmem(devc, mp_base, i, smw_ucode[i]);
-
-		/*
-		 *  Verify microcode
-		 */
-
-		for (i = 0; i < 8192; i++)
-			if (smw_getmem(devc, mp_base, i) != smw_ucode[i])
-			{
-				printk(KERN_ERR "SM Wave: Microcode verification failed\n");
-				return 0;
-			}
-	}
-	control = 0;
-#ifdef SMW_SCSI_IRQ
-	/*
-	 * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt
-	 * is disabled by default.
-	 *
-	 * FIXME - make this a module option
-	 *
-	 * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10.
-	 */
-	{
-		static unsigned char scsi_irq_bits[] = {
-			0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0
-		};
-		control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6;
-	}
-#endif
-
-#ifdef SMW_OPL4_ENABLE
-	/*
-	 *  Make the OPL4 chip visible on the PC bus at 0x380.
-	 *
-	 *  There is no need to enable this feature since this driver
-	 *  doesn't support OPL4 yet. Also there is no RAM in SM Wave so
-	 *  enabling OPL4 is pretty useless.
-	 */
-	control |= 0x10;	/* Uses IRQ12 if bit 0x20 == 0 */
-	/* control |= 0x20;      Uncomment this if you want to use IRQ7 */
-#endif
-	outb((control | 0x03), mpu_base + 7);	/* xxxxxx11 restarts */
-	hw_config->name = "SoundMan Wave";
-	return 1;
-}
-
-static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config)
-{
-	int mpu_base = hw_config->io_base;
-	int sb_base = devc->base;
-	int irq = hw_config->irq;
-
-	unsigned char bits = 0;
-	unsigned long flags;
-
-	if (irq < 0)
-		irq *= -1;
-
-	if (irq < 1 || irq > 15 ||
-	    jazz_irq_bits[irq] == 0)
-	{
-		printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq);
-		return 0;
-	}
-	switch (sb_base)
-	{
-		case 0x220:
-			bits = 1;
-			break;
-		case 0x240:
-			bits = 2;
-			break;
-		case 0x260:
-			bits = 3;
-			break;
-		default:
-			return 0;
-	}
-	bits = jazz16_bits = bits << 5;
-	switch (mpu_base)
-	{
-		case 0x310:
-			bits |= 1;
-			break;
-		case 0x320:
-			bits |= 2;
-			break;
-		case 0x330:
-			bits |= 3;
-			break;
-		default:
-			printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base);
-			return 0;
-	}
-	/*
-	 *	Magic wake up sequence by writing to 0x201 (aka Joystick port)
-	 */
-	spin_lock_irqsave(&jazz16_lock, flags);
-	outb(0xAF, 0x201);
-	outb(0x50, 0x201);
-	outb(bits, 0x201);
-	spin_unlock_irqrestore(&jazz16_lock, flags);
-
-	hw_config->name = "Jazz16";
-	smw_midi_init(devc, hw_config);
-
-	if (!sb_dsp_command(devc, 0xfb))
-		return 0;
-
-	if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] |
-			    (jazz_dma_bits[devc->dma16] << 4)))
-		return 0;
-
-	if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] |
-			    (jazz_irq_bits[irq] << 4)))
-		return 0;
-
-	return 1;
-}
-
-int probe_sbmpu(struct address_info *hw_config, struct module *owner)
-{
-	sb_devc *devc = last_devc;
-	int ret;
-
-	if (last_devc == NULL)
-		return 0;
-
-	last_devc = NULL;
-
-	if (hw_config->io_base <= 0)
-	{
-		/* The real vibra16 is fine about this, but we have to go
-		   wipe up after Cyrix again */
-		   	   
-		if(devc->model == MDL_SB16 && devc->minor >= 12)
-		{
-			unsigned char   bits = sb_getmixer(devc, 0x84) & ~0x06;
-			sb_setmixer(devc, 0x84, bits | 0x02);		/* Disable MPU */
-		}
-		return 0;
-	}
-
-#if defined(CONFIG_SOUND_MPU401)
-	if (devc->model == MDL_ESS)
-	{
-		struct resource *ports;
-		ports = request_region(hw_config->io_base, 2, "mpu401");
-		if (!ports) {
-			printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base);
-			return 0;
-		}
-		if (!ess_midi_init(devc, hw_config)) {
-			release_region(hw_config->io_base, 2);
-			return 0;
-		}
-		hw_config->name = "ESS1xxx MPU";
-		devc->midi_irq_cookie = NULL;
-		if (!probe_mpu401(hw_config, ports)) {
-			release_region(hw_config->io_base, 2);
-			return 0;
-		}
-		attach_mpu401(hw_config, owner);
-		if (last_sb->irq == -hw_config->irq)
-			last_sb->midi_irq_cookie =
-				(void *)(long) hw_config->slots[1];
-		return 1;
-	}
-#endif
-
-	switch (devc->model)
-	{
-		case MDL_SB16:
-			if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330)
-			{
-				printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base);
-				return 0;
-			}
-			hw_config->name = "Sound Blaster 16";
-			if (hw_config->irq < 3 || hw_config->irq == devc->irq)
-				hw_config->irq = -devc->irq;
-			if (devc->minor > 12)		/* What is Vibra's version??? */
-				sb16_set_mpu_port(devc, hw_config);
-			break;
-
-		case MDL_JAZZ:
-			if (hw_config->irq < 3 || hw_config->irq == devc->irq)
-				hw_config->irq = -devc->irq;
-			if (!init_Jazz16_midi(devc, hw_config))
-				return 0;
-			break;
-
-		case MDL_YMPCI:
-			hw_config->name = "Yamaha PCI Legacy";
-			printk("Yamaha PCI legacy UART401 check.\n");
-			break;
-		default:
-			return 0;
-	}
-	
-	ret = probe_uart401(hw_config, owner);
-	if (ret)
-		last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc;
-	return ret;
-}
-
-void unload_sbmpu(struct address_info *hw_config)
-{
-#if defined(CONFIG_SOUND_MPU401)
-	if (!strcmp (hw_config->name, "ESS1xxx MPU")) {
-		unload_mpu401(hw_config);
-		return;
-	}
-#endif
-	unload_uart401(hw_config);
-}
-
-EXPORT_SYMBOL(sb_dsp_init);
-EXPORT_SYMBOL(sb_dsp_detect);
-EXPORT_SYMBOL(sb_dsp_unload);
-EXPORT_SYMBOL(sb_be_quiet);
-EXPORT_SYMBOL(probe_sbmpu);
-EXPORT_SYMBOL(unload_sbmpu);
-EXPORT_SYMBOL(smw_free);
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c
deleted file mode 100644
index 57f7d25a2cd3..000000000000
--- a/sound/oss/sb_ess.c
+++ /dev/null
@@ -1,1822 +0,0 @@
-#undef FKS_LOGGING
-#undef FKS_TEST
-
-/*
- * tabs should be 4 spaces, in vi(m): set tabstop=4
- *
- * TODO: 	consistency speed calculations!!
- *			cleanup!
- * ????:	Did I break MIDI support?
- *
- * History:
- *
- * Rolf Fokkens	 (Dec 20 1998):	ES188x recording level support on a per
- * fokkensr@vertis.nl			input basis.
- *				 (Dec 24 1998):	Recognition of ES1788, ES1887, ES1888,
- *								ES1868, ES1869 and ES1878. Could be used for
- *								specific handling in the future. All except
- *								ES1887 and ES1888 and ES688 are handled like
- *								ES1688.
- *				 (Dec 27 1998):	RECLEV for all (?) ES1688+ chips. ES188x now
- *								have the "Dec 20" support + RECLEV
- *				 (Jan  2 1999):	Preparation for Full Duplex. This means
- *								Audio 2 is now used for playback when dma16
- *								is specified. The next step would be to use
- *								Audio 1 and Audio 2 at the same time.
- *				 (Jan  9 1999):	Put all ESS stuff into sb_ess.[ch], this
- *								includes both the ESS stuff that has been in
- *								sb_*[ch] before I touched it and the ESS support
- *								I added later
- *				 (Jan 23 1999):	Full Duplex seems to work. I wrote a small
- *								test proggy which works OK. Haven't found
- *								any applications to test it though. So why did
- *								I bother to create it anyway?? :) Just for
- *								fun.
- *				 (May  2 1999):	I tried to be too smart by "introducing"
- *								ess_calc_best_speed (). The idea was that two
- *								dividers could be used to setup a samplerate,
- *								ess_calc_best_speed () would choose the best.
- *								This works for playback, but results in
- *								recording problems for high samplerates. I
- *								fixed this by removing ess_calc_best_speed ()
- *								and just doing what the documentation says. 
- * Andy Sloane   (Jun  4 1999): Stole some code from ALSA to fix the playback
- * andy@guildsoftware.com		speed on ES1869, ES1879, ES1887, and ES1888.
- * 								1879's were previously ignored by this driver;
- * 								added (untested) support for those.
- * Cvetan Ivanov (Oct 27 1999): Fixed ess_dsp_init to call ess_set_dma_hw for
- * zezo@inet.bg					_ALL_ ESS models, not only ES1887
- *
- * This files contains ESS chip specifics. It's based on the existing ESS
- * handling as it resided in sb_common.c, sb_mixer.c and sb_audio.c. This
- * file adds features like:
- * - Chip Identification (as shown in /proc/sound)
- * - RECLEV support for ES1688 and later
- * - 6 bits playback level support chips later than ES1688
- * - Recording level support on a per-device basis for ES1887
- * - Full-Duplex for ES1887
- *
- * Full duplex is enabled by specifying dma16. While the normal dma must
- * be one of 0, 1 or 3, dma16 can be one of 0, 1, 3 or 5. DMA 5 is a 16 bit
- * DMA channel, while the others are 8 bit..
- *
- * ESS detection isn't full proof (yet). If it fails an additional module
- * parameter esstype can be specified to be one of the following:
- * -1, 0, 688, 1688, 1868, 1869, 1788, 1887, 1888
- * -1 means: mimic 2.0 behaviour, 
- *  0 means: auto detect.
- *   others: explicitly specify chip
- * -1 is default, cause auto detect still doesn't work.
- */
-
-/*
- * About the documentation
- *
- * I don't know if the chips all are OK, but the documentation is buggy. 'cause
- * I don't have all the cips myself, there's a lot I cannot verify. I'll try to
- * keep track of my latest insights about his here. If you have additional info,
- * please enlighten me (fokkensr@vertis.nl)!
- *
- * I had the impression that ES1688 also has 6 bit master volume control. The
- * documentation about ES1888 (rev C, october '95) claims that ES1888 has
- * the following features ES1688 doesn't have:
- * - 6 bit master volume
- * - Full Duplex
- * So ES1688 apparently doesn't have 6 bit master volume control, but the
- * ES1688 does have RECLEV control. Makes me wonder: does ES688 have it too?
- * Without RECLEV ES688 won't be much fun I guess.
- *
- * From the ES1888 (rev C, october '95) documentation I got the impression
- * that registers 0x68 to 0x6e don't exist which means: no recording volume
- * controls. To my surprise the ES888 documentation (1/14/96) claims that
- * ES888 does have these record mixer registers, but that ES1888 doesn't have
- * 0x69 and 0x6b. So the rest should be there.
- *
- * I'm trying to get ES1887 Full Duplex. Audio 2 is playback only, while Audio 2
- * is both record and playback. I think I should use Audio 2 for all playback.
- *
- * The documentation is an adventure: it's close but not fully accurate. I
- * found out that after a reset some registers are *NOT* reset, though the
- * docs say the would be. Interesting ones are 0x7f, 0x7d and 0x7a. They are
- * related to the Audio 2 channel. I also was surprised about the consequences
- * of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves
- * into ES1888 mode. This means that it claims IRQ 11, which happens to be my
- * ISDN adapter. Needless to say it no longer worked. I now understand why
- * after rebooting 0x7f already was 0x05, the value of my choice: the BIOS
- * did it.
- *
- * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is
- * described as if it's exactly the same as register 0xa1. This is *NOT* true.
- * The description of 0x70 in ES1869 docs is accurate however.
- * Well, the assumption about ES1869 was wrong: register 0x70 is very much
- * like register 0xa1, except that bit 7 is always 1, whatever you want
- * it to be.
- *
- * When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2
- * has effect.
- *
- * Software reset not being able to reset all registers is great! Especially
- * the fact that register 0x78 isn't reset is great when you wanna change back
- * to single dma operation (simplex): audio 2 is still operational, and uses
- * the same dma as audio 1: your ess changes into a funny echo machine.
- *
- * Received the news that ES1688 is detected as a ES1788. Did some thinking:
- * the ES1887 detection scheme suggests in step 2 to try if bit 3 of register
- * 0x64 can be changed. This is inaccurate, first I inverted the * check: "If
- * can be modified, it's a 1688", which lead to a correct detection
- * of my ES1887. It resulted however in bad detection of 1688 (reported by mail)
- * and 1868 (if no PnP detection first): they result in a 1788 being detected.
- * I don't have docs on 1688, but I do have docs on 1868: The documentation is
- * probably inaccurate in the fact that I should check bit 2, not bit 3. This
- * is what I do now.
- */
-
-/*
- * About recognition of ESS chips
- *
- * The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in
- * a (preliminary ??) datasheet on ES1887. Its aim is to identify ES1887, but
- * during detection the text claims that "this chip may be ..." when a step
- * fails. This scheme is used to distinct between the above chips.
- * It appears however that some PnP chips like ES1868 are recognized as ES1788
- * by the ES1887 detection scheme. These PnP chips can be detected in another
- * way however: ES1868, ES1869 and ES1878 can be recognized (full proof I think)
- * by repeatedly reading mixer register 0x40. This is done by ess_identify in
- * sb_common.c.
- * This results in the following detection steps:
- * - distinct between ES688 and ES1688+ (as always done in this driver)
- *   if ES688 we're ready
- * - try to detect ES1868, ES1869 or ES1878
- *   if successful we're ready
- * - try to detect ES1888, ES1887 or ES1788
- *   if successful we're ready
- * - Dunno. Must be 1688. Will do in general
- *
- * About RECLEV support:
- *
- * The existing ES1688 support didn't take care of the ES1688+ recording
- * levels very well. Whenever a device was selected (recmask) for recording
- * its recording level was loud, and it couldn't be changed. The fact that
- * internal register 0xb4 could take care of RECLEV, didn't work meaning until
- * its value was restored every time the chip was reset; this reset the
- * value of 0xb4 too. I guess that's what 4front also had (have?) trouble with.
- *
- * About ES1887 support:
- *
- * The ES1887 has separate registers to control the recording levels, for all
- * inputs. The ES1887 specific software makes these levels the same as their
- * corresponding playback levels, unless recmask says they aren't recorded. In
- * the latter case the recording volumes are 0.
- * Now recording levels of inputs can be controlled, by changing the playback
- * levels. Furthermore several devices can be recorded together (which is not
- * possible with the ES1688).
- * Besides the separate recording level control for each input, the common
- * recording level can also be controlled by RECLEV as described above.
- *
- * Not only ES1887 have this recording mixer. I know the following from the
- * documentation:
- * ES688	no
- * ES1688	no
- * ES1868	no
- * ES1869	yes
- * ES1878	no
- * ES1879	yes
- * ES1888	no/yes	Contradicting documentation; most recent: yes
- * ES1946	yes		This is a PCI chip; not handled by this driver
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-#include "sb_mixer.h"
-#include "sb.h"
-
-#include "sb_ess.h"
-
-#define ESSTYPE_LIKE20	-1		/* Mimic 2.0 behaviour					*/
-#define ESSTYPE_DETECT	0		/* Mimic 2.0 behaviour					*/
-
-#define SUBMDL_ES1788	0x10	/* Subtype ES1788 for specific handling */
-#define SUBMDL_ES1868	0x11	/* Subtype ES1868 for specific handling */
-#define SUBMDL_ES1869	0x12	/* Subtype ES1869 for specific handling */
-#define SUBMDL_ES1878	0x13	/* Subtype ES1878 for specific handling */
-#define SUBMDL_ES1879	0x16    /* ES1879 was initially forgotten */
-#define SUBMDL_ES1887	0x14	/* Subtype ES1887 for specific handling */
-#define SUBMDL_ES1888	0x15	/* Subtype ES1888 for specific handling */
-
-#define SB_CAP_ES18XX_RATE 0x100
-
-#define ES1688_CLOCK1 795444 /* 128 - div */
-#define ES1688_CLOCK2 397722 /* 256 - div */
-#define ES18XX_CLOCK1 793800 /* 128 - div */
-#define ES18XX_CLOCK2 768000 /* 256 - div */
-
-#ifdef FKS_LOGGING
-static void ess_show_mixerregs (sb_devc *devc);
-#endif
-static int ess_read (sb_devc * devc, unsigned char reg);
-static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data);
-static void ess_chgmixer
-	(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val);
-
-/****************************************************************************
- *																			*
- *									ESS audio								*
- *																			*
- ****************************************************************************/
-
-struct ess_command {short cmd; short data;};
-
-/*
- * Commands for initializing Audio 1 for input (record)
- */
-static struct ess_command ess_i08m[] =		/* input 8 bit mono */
-	{ {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
-static struct ess_command ess_i16m[] =		/* input 16 bit mono */
-	{ {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
-static struct ess_command ess_i08s[] =		/* input 8 bit stereo */
-	{ {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
-static struct ess_command ess_i16s[] =		/* input 16 bit stereo */
-	{ {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };
-
-static struct ess_command *ess_inp_cmds[] =
-	{ ess_i08m, ess_i16m, ess_i08s, ess_i16s };
-
-
-/*
- * Commands for initializing Audio 1 for output (playback)
- */
-static struct ess_command ess_o08m[] =		/* output 8 bit mono */
-	{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
-static struct ess_command ess_o16m[] =		/* output 16 bit mono */
-	{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
-static struct ess_command ess_o08s[] =		/* output 8 bit stereo */
-	{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
-static struct ess_command ess_o16s[] =		/* output 16 bit stereo */
-	{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };
-
-static struct ess_command *ess_out_cmds[] =
-	{ ess_o08m, ess_o16m, ess_o08s, ess_o16s };
-
-static void ess_exec_commands
-	(sb_devc *devc, struct ess_command *cmdtab[])
-{
-	struct ess_command *cmd;
-
-	cmd = cmdtab [ ((devc->channels != 1) << 1) + (devc->bits != AFMT_U8) ];
-
-	while (cmd->cmd != -1) {
-		ess_write (devc, cmd->cmd, cmd->data);
-		cmd++;
-	}
-}
-
-static void ess_change
-	(sb_devc *devc, unsigned int reg, unsigned int mask, unsigned int val)
-{
-	int value;
-
-	value = ess_read (devc, reg);
-	value = (value & ~mask) | (val & mask);
-	ess_write (devc, reg, value);
-}
-
-static void ess_set_output_parms
-	(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (devc->duplex) {
-		devc->trg_buf_16 = buf;
-		devc->trg_bytes_16 = nr_bytes;
-		devc->trg_intrflag_16 = intrflag;
-		devc->irq_mode_16 = IMODE_OUTPUT;
-	} else {
-		devc->trg_buf = buf;
-		devc->trg_bytes = nr_bytes;
-		devc->trg_intrflag = intrflag;
-		devc->irq_mode = IMODE_OUTPUT;
-	}
-}
-
-static void ess_set_input_parms
-	(int dev, unsigned long buf, int count, int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	devc->trg_buf = buf;
-	devc->trg_bytes = count;
-	devc->trg_intrflag = intrflag;
-	devc->irq_mode = IMODE_INPUT;
-}
-
-static int ess_calc_div (int clock, int revert, int *speedp, int *diffp)
-{
-	int divider;
-	int speed, diff;
-	int retval;
-
-	speed   = *speedp;
-	divider = (clock + speed / 2) / speed;
-	retval  = revert - divider;
-	if (retval > revert - 1) {
-		retval  = revert - 1;
-		divider = revert - retval;
-	}
-	/* This line is suggested. Must be wrong I think
-	*speedp = (clock + divider / 2) / divider;
-	So I chose the next one */
-
-	*speedp	= clock / divider;
-	diff	= speed - *speedp;
-	if (diff < 0) diff =-diff;
-	*diffp  = diff;
-
-	return retval;
-}
-
-static int ess_calc_best_speed
-	(int clock1, int rev1, int clock2, int rev2, int *divp, int *speedp)
-{
-	int speed1 = *speedp, speed2 = *speedp;
-	int div1, div2;
-	int diff1, diff2;
-	int retval;
-
-	div1 = ess_calc_div (clock1, rev1, &speed1, &diff1);
-	div2 = ess_calc_div (clock2, rev2, &speed2, &diff2);
-
-	if (diff1 < diff2) {
-		*divp   = div1;
-		*speedp = speed1;
-		retval  = 1;
-	} else {
-	/*	*divp   = div2; */
-		*divp   = 0x80 | div2;
-		*speedp = speed2;
-		retval  = 2;
-	}
-
-	return retval;
-}
-
-/*
- * Depending on the audiochannel ESS devices can
- * have different clock settings. These are made consistent for duplex
- * however.
- * callers of ess_speed only do an audionum suggestion, which means
- * input suggests 1, output suggests 2. This suggestion is only true
- * however when doing duplex.
- */
-static void ess_common_speed (sb_devc *devc, int *speedp, int *divp)
-{
-	int diff = 0, div;
-
-	if (devc->duplex) {
-		/*
-		 * The 0x80 is important for the first audio channel
-		 */
-		if (devc->submodel == SUBMDL_ES1888) {
-			div = 0x80 | ess_calc_div (795500, 256, speedp, &diff);
-		} else {
-			div = 0x80 | ess_calc_div (795500, 128, speedp, &diff);
-		}
-	} else if(devc->caps & SB_CAP_ES18XX_RATE) {
-		if (devc->submodel == SUBMDL_ES1888) {
-			ess_calc_best_speed(397700, 128, 795500, 256, 
-						&div, speedp);
-		} else {
-			ess_calc_best_speed(ES18XX_CLOCK1, 128, ES18XX_CLOCK2, 256, 
-						&div, speedp);
-		}
-	} else {
-		if (*speedp > 22000) {
-			div = 0x80 | ess_calc_div (ES1688_CLOCK1, 256, speedp, &diff);
-		} else {
-			div = 0x00 | ess_calc_div (ES1688_CLOCK2, 128, speedp, &diff);
-		}
-	}
-	*divp = div;
-}
-
-static void ess_speed (sb_devc *devc, int audionum)
-{
-	int speed;
-	int div, div2;
-
-	ess_common_speed (devc, &(devc->speed), &div);
-
-#ifdef FKS_REG_LOGGING
-printk (KERN_INFO "FKS: ess_speed (%d) b speed = %d, div=%x\n", audionum, devc->speed, div);
-#endif
-
-	/* Set filter roll-off to 90% of speed/2 */
-	speed = (devc->speed * 9) / 20;
-
-	div2 = 256 - 7160000 / (speed * 82);
-
-	if (!devc->duplex) audionum = 1;
-
-	if (audionum == 1) {
-		/* Change behaviour of register A1 *
-		sb_chg_mixer(devc, 0x71, 0x20, 0x20)
-		* For ES1869 only??? */
-		ess_write (devc, 0xa1, div);
-		ess_write (devc, 0xa2, div2);
-	} else {
-		ess_setmixer (devc, 0x70, div);
-		/*
-		 * FKS: fascinating: 0x72 doesn't seem to work.
-		 */
-		ess_write (devc, 0xa2, div2);
-		ess_setmixer (devc, 0x72, div2);
-	}
-}
-
-static int ess_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	ess_speed(devc, 1);
-
-	sb_dsp_command(devc, DSP_CMD_SPKOFF);
-
-	ess_write (devc, 0xb8, 0x0e);	/* Auto init DMA mode */
-	ess_change (devc, 0xa8, 0x03, 3 - devc->channels);	/* Mono/stereo */
-	ess_write (devc, 0xb9, 2);	/* Demand mode (4 bytes/DMA request) */
-
-	ess_exec_commands (devc, ess_inp_cmds);
-
-	ess_change (devc, 0xb1, 0xf0, 0x50);
-	ess_change (devc, 0xb2, 0xf0, 0x50);
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int ess_audio_prepare_for_output_audio1 (int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	sb_dsp_reset(devc);
-	ess_speed(devc, 1);
-	ess_write (devc, 0xb8, 4);	/* Auto init DMA mode */
-	ess_change (devc, 0xa8, 0x03, 3 - devc->channels);	/* Mono/stereo */
-	ess_write (devc, 0xb9, 2);	/* Demand mode (4 bytes/request) */
-
-	ess_exec_commands (devc, ess_out_cmds);
-
-	ess_change (devc, 0xb1, 0xf0, 0x50);	/* Enable DMA */
-	ess_change (devc, 0xb2, 0xf0, 0x50);	/* Enable IRQ */
-
-	sb_dsp_command(devc, DSP_CMD_SPKON);	/* There be sound! */
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int ess_audio_prepare_for_output_audio2 (int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned char bits;
-
-/* FKS: qqq
-	sb_dsp_reset(devc);
-*/
-
-	/*
-	 * Auto-Initialize:
-	 * DMA mode + demand mode (8 bytes/request, yes I want it all!)
-	 * But leave 16-bit DMA bit untouched!
-	 */
-	ess_chgmixer (devc, 0x78, 0xd0, 0xd0);
-
-	ess_speed(devc, 2);
-
-	/* bits 4:3 on ES1887 represent recording source. Keep them! */
-	bits = ess_getmixer (devc, 0x7a) & 0x18;
-
-	/* Set stereo/mono */
-	if (devc->channels != 1) bits |= 0x02;
-
-	/* Init DACs; UNSIGNED mode for 8 bit; SIGNED mode for 16 bit */
-	if (devc->bits != AFMT_U8) bits |= 0x05;	/* 16 bit */
-
-	/* Enable DMA, IRQ will be shared (hopefully)*/
-	bits |= 0x60;
-
-	ess_setmixer (devc, 0x7a, bits);
-
-	ess_mixer_reload (devc, SOUND_MIXER_PCM);	/* There be sound! */
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int ess_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-#ifdef FKS_REG_LOGGING
-printk(KERN_INFO "ess_audio_prepare_for_output: dma_out=%d,dma_in=%d\n"
-, audio_devs[dev]->dmap_out->dma, audio_devs[dev]->dmap_in->dma);
-#endif
-
-	if (devc->duplex) {
-		return ess_audio_prepare_for_output_audio2 (dev, bsize, bcount);
-	} else {
-		return ess_audio_prepare_for_output_audio1 (dev, bsize, bcount);
-	}
-}
-
-static void ess_audio_halt_xfer(int dev)
-{
-	unsigned long flags;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	sb_dsp_reset(devc);
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	/*
-	 * Audio 2 may still be operational! Creates awful sounds!
-	 */
-	if (devc->duplex) ess_chgmixer(devc, 0x78, 0x03, 0x00);
-}
-
-static void ess_audio_start_input
-	(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	short c = -nr_bytes;
-
-	/*
-	 * Start a DMA input to the buffer pointed by dmaqtail
-	 */
-
-	if (audio_devs[dev]->dmap_in->dma > 3) count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_INPUT;
-
-	ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
-	ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));
-
-	ess_change (devc, 0xb8, 0x0f, 0x0f);	/* Go */
-	devc->intr_active = 1;
-}
-
-static void ess_audio_output_block_audio1
-	(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	short c = -nr_bytes;
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_OUTPUT;
-
-	ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
-	ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));
-
-	ess_change (devc, 0xb8, 0x05, 0x05);	/* Go */
-	devc->intr_active = 1;
-}
-
-static void ess_audio_output_block_audio2
-	(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	short c = -nr_bytes;
-
-	if (audio_devs[dev]->dmap_out->dma > 3) count >>= 1;
-	count--;
-
-	ess_setmixer (devc, 0x74, (unsigned char) ((unsigned short) c & 0xff));
-	ess_setmixer (devc, 0x76, (unsigned char) (((unsigned short) c >> 8) & 0xff));
-	ess_chgmixer (devc, 0x78, 0x03, 0x03);   /* Go */
-
-	devc->irq_mode_16 = IMODE_OUTPUT;
-	devc->intr_active_16 = 1;
-}
-
-static void ess_audio_output_block
-	(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (devc->duplex) {
-		ess_audio_output_block_audio2 (dev, buf, nr_bytes, intrflag);
-	} else {
-		ess_audio_output_block_audio1 (dev, buf, nr_bytes, intrflag);
-	}
-}
-
-/*
- * FKS: the if-statements for both bits and bits_16 are quite alike.
- * Combine this...
- */
-static void ess_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	int bits_16 = bits & devc->irq_mode_16;
-	bits &= devc->irq_mode;
-
-	if (!bits && !bits_16) {
-		/* FKS oh oh.... wrong?? for dma 16? */
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	}
-
-	if (bits) {
-		switch (devc->irq_mode)
-		{
-			case IMODE_INPUT:
-				ess_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
-					devc->trg_intrflag);
-				break;
-
-			case IMODE_OUTPUT:
-				ess_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
-					devc->trg_intrflag);
-				break;
-		}
-	}
-
-	if (bits_16) {
-		switch (devc->irq_mode_16) {
-		case IMODE_INPUT:
-			ess_audio_start_input(dev, devc->trg_buf_16, devc->trg_bytes_16,
-					devc->trg_intrflag_16);
-			break;
-
-		case IMODE_OUTPUT:
-			ess_audio_output_block(dev, devc->trg_buf_16, devc->trg_bytes_16,
-					devc->trg_intrflag_16);
-			break;
-		}
-	}
-
-	devc->trigger_bits = bits | bits_16;
-}
-
-static int ess_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	int minspeed, maxspeed, dummydiv;
-
-	if (speed > 0) {
-		minspeed = (devc->duplex ? 6215  : 5000 );
-		maxspeed = (devc->duplex ? 44100 : 48000);
-		if (speed < minspeed) speed = minspeed;
-		if (speed > maxspeed) speed = maxspeed;
-
-		ess_common_speed (devc, &speed, &dummydiv);
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-/*
- * FKS: This is a one-on-one copy of sb1_audio_set_bits
- */
-static unsigned int ess_audio_set_bits(int dev, unsigned int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (bits != 0) {
-		if (bits == AFMT_U8 || bits == AFMT_S16_LE) {
-			devc->bits = bits;
-		} else {
-			devc->bits = AFMT_U8;
-		}
-	}
-
-	return devc->bits;
-}
-
-/*
- * FKS: This is a one-on-one copy of sbpro_audio_set_channels
- * (*) Modified it!!
- */
-static short ess_audio_set_channels(int dev, short channels)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (channels == 1 || channels == 2) devc->channels = channels;
-
-	return devc->channels;
-}
-
-static struct audio_driver ess_audio_driver =   /* ESS ES688/1688 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= ess_set_output_parms,
-	.start_input		= ess_set_input_parms,
-	.prepare_for_input	= ess_audio_prepare_for_input,
-	.prepare_for_output	= ess_audio_prepare_for_output,
-	.halt_io		= ess_audio_halt_xfer,
-	.trigger		= ess_audio_trigger,
-	.set_speed		= ess_audio_set_speed,
-	.set_bits		= ess_audio_set_bits,
-	.set_channels		= ess_audio_set_channels
-};
-
-/*
- * ess_audio_init must be called from sb_audio_init
- */
-struct audio_driver *ess_audio_init
-		(sb_devc *devc, int *audio_flags, int *format_mask)
-{
-	*audio_flags = DMA_AUTOMODE;
-	*format_mask |= AFMT_S16_LE;
-
-	if (devc->duplex) {
-		int tmp_dma;
-		/*
-		 * sb_audio_init thinks dma8 is for playback and
-		 * dma16 is for record. Not now! So swap them.
-		 */
-		tmp_dma		= devc->dma16;
-		devc->dma16	= devc->dma8;
-		devc->dma8	= tmp_dma;
-
-		*audio_flags |= DMA_DUPLEX;
-	}
-
-	return &ess_audio_driver;
-}
-
-/****************************************************************************
- *																			*
- *								ESS common									*
- *																			*
- ****************************************************************************/
-static void ess_handle_channel
-	(char *channel, int dev, int intr_active, unsigned char flag, int irq_mode)
-{
-	if (!intr_active || !flag) return;
-#ifdef FKS_REG_LOGGING
-printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode);
-#endif
-	switch (irq_mode) {
-		case IMODE_OUTPUT:
-			DMAbuf_outputintr (dev, 1);
-			break;
-
-		case IMODE_INPUT:
-			DMAbuf_inputintr (dev);
-			break;
-
-		case IMODE_INIT:
-			break;
-
-		default:;
-			/* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */
-	}
-}
-
-/*
- * FKS: TODO!!! Finish this!
- *
- * I think midi stuff uses uart401, without interrupts.
- * So IMODE_MIDI isn't a value for devc->irq_mode.
- */
-void ess_intr (sb_devc *devc)
-{
-	int				status;
-	unsigned char	src;
-
-	if (devc->submodel == SUBMDL_ES1887) {
-		src = ess_getmixer (devc, 0x7f) >> 4;
-	} else {
-		src = 0xff;
-	}
-
-#ifdef FKS_REG_LOGGING
-printk(KERN_INFO "FKS: sbintr src=%x\n",(int)src);
-#endif
-	ess_handle_channel
-		( "Audio 1"
-		, devc->dev, devc->intr_active   , src & 0x01, devc->irq_mode   );
-	ess_handle_channel
-		( "Audio 2"
-		, devc->dev, devc->intr_active_16, src & 0x02, devc->irq_mode_16);
-	/*
-	 * Acknowledge interrupts
-	 */
-	if (devc->submodel == SUBMDL_ES1887 && (src & 0x02)) {
-		ess_chgmixer (devc, 0x7a, 0x80, 0x00);
-	}
-
-	if (src & 0x01) {
-		status = inb(DSP_DATA_AVAIL);
-	}
-}
-
-static void ess_extended (sb_devc * devc)
-{
-	/* Enable extended mode */
-
-	sb_dsp_command(devc, 0xc6);
-}
-
-static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data)
-{
-#ifdef FKS_REG_LOGGING
-printk(KERN_INFO "FKS: write reg %x: %x\n", reg, data);
-#endif
-	/* Write a byte to an extended mode register of ES1688 */
-
-	if (!sb_dsp_command(devc, reg))
-		return 0;
-
-	return sb_dsp_command(devc, data);
-}
-
-static int ess_read (sb_devc * devc, unsigned char reg)
-{
-	/* Read a byte from an extended mode register of ES1688 */
-
-	/* Read register command */
-	if (!sb_dsp_command(devc, 0xc0)) return -1;
-
-	if (!sb_dsp_command(devc, reg )) return -1;
-
-	return sb_dsp_get_byte(devc);
-}
-
-int ess_dsp_reset(sb_devc * devc)
-{
-	int loopc;
-
-#ifdef FKS_REG_LOGGING
-printk(KERN_INFO "FKS: ess_dsp_reset 1\n");
-ess_show_mixerregs (devc);
-#endif
-
-	outb(3, DSP_RESET); /* Reset FIFO too */
-
-	udelay(10);
-	outb(0, DSP_RESET);
-	udelay(30);
-
-	for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
-
-	if (inb(DSP_READ) != 0xAA) {
-		DDB(printk("sb: No response to RESET\n"));
-		return 0;   /* Sorry */
-	}
-	ess_extended (devc);
-
-#ifdef FKS_LOGGING
-printk(KERN_INFO "FKS: dsp_reset 2\n");
-ess_show_mixerregs (devc);
-#endif
-
-	return 1;
-}
-
-static int ess_irq_bits (int irq)
-{
-	switch (irq) {
-	case 2:
-	case 9:
-		return 0;
-
-	case 5:
-		return 1;
-
-	case 7:
-		return 2;
-
-	case 10:
-		return 3;
-
-	default:
-		printk(KERN_ERR "ESS1688: Invalid IRQ %d\n", irq);
-		return -1;
-	}
-}
-
-/*
- *	Set IRQ configuration register for all ESS models
- */
-static int ess_common_set_irq_hw (sb_devc * devc)
-{
-	int irq_bits;
-
-	if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return 0;
-
-	if (!ess_write (devc, 0xb1, 0x50 | (irq_bits << 2))) {
-		printk(KERN_ERR "ES1688: Failed to write to IRQ config register\n");
-		return 0;
-	}
-	return 1;
-}
-
-/*
- * I wanna use modern ES1887 mixer irq handling. Funny is the
- * fact that my BIOS wants the same. But suppose someone's BIOS
- * doesn't do this!
- * This is independent of duplex. If there's a 1887 this will
- * prevent it from going into 1888 mode.
- */
-static void ess_es1887_set_irq_hw (sb_devc * devc)
-{
-	int irq_bits;
-
-	if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return;
-
-	ess_chgmixer (devc, 0x7f, 0x0f, 0x01 | ((irq_bits + 1) << 1));
-}
-
-static int ess_set_irq_hw (sb_devc * devc)
-{
-	if (devc->submodel == SUBMDL_ES1887) ess_es1887_set_irq_hw (devc);
-
-	return ess_common_set_irq_hw (devc);
-}
-
-#ifdef FKS_TEST
-
-/*
- * FKS_test:
- *	for ES1887: 00, 18, non wr bits: 0001 1000
- *	for ES1868: 00, b8, non wr bits: 1011 1000
- *	for ES1888: 00, f8, non wr bits: 1111 1000
- *	for ES1688: 00, f8, non wr bits: 1111 1000
- *	+   ES968
- */
-
-static void FKS_test (sb_devc * devc)
-{
-	int val1, val2;
-	val1 = ess_getmixer (devc, 0x64);
-	ess_setmixer (devc, 0x64, ~val1);
-	val2 = ess_getmixer (devc, 0x64) ^ ~val1;
-	ess_setmixer (devc, 0x64, val1);
-	val1 ^= ess_getmixer (devc, 0x64);
-printk (KERN_INFO "FKS: FKS_test %02x, %02x\n", (val1 & 0x0ff), (val2 & 0x0ff));
-};
-#endif
-
-static unsigned int ess_identify (sb_devc * devc)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	outb(((unsigned char) (0x40 & 0xff)), MIXER_ADDR);
-
-	udelay(20);
-	val  = inb(MIXER_DATA) << 8;
-	udelay(20);
-	val |= inb(MIXER_DATA);
-	udelay(20);
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	return val;
-}
-
-/*
- * ESS technology describes a detection scheme in their docs. It involves
- * fiddling with the bits in certain mixer registers. ess_probe is supposed
- * to help.
- *
- * FKS: tracing shows ess_probe writes wrong value to 0x64. Bit 3 reads 1, but
- * should be written 0 only. Check this.
- */
-static int ess_probe (sb_devc * devc, int reg, int xorval)
-{
-	int  val1, val2, val3;
-
-	val1 = ess_getmixer (devc, reg);
-	val2 = val1 ^ xorval;
-	ess_setmixer (devc, reg, val2);
-	val3 = ess_getmixer (devc, reg);
-	ess_setmixer (devc, reg, val1);
-
-	return (val2 == val3);
-}
-
-int ess_init(sb_devc * devc, struct address_info *hw_config)
-{
-	unsigned char cfg;
-	int ess_major = 0, ess_minor = 0;
-	int i;
-	static char name[100], modelname[10];
-
-	/*
-	 * Try to detect ESS chips.
-	 */
-
-	sb_dsp_command(devc, 0xe7); /* Return identification */
-
-	for (i = 1000; i; i--) {
-		if (inb(DSP_DATA_AVAIL) & 0x80) {
-			if (ess_major == 0) {
-				ess_major = inb(DSP_READ);
-			} else {
-				ess_minor = inb(DSP_READ);
-				break;
-			}
-		}
-	}
-
-	if (ess_major == 0) return 0;
-
-	if (ess_major == 0x48 && (ess_minor & 0xf0) == 0x80) {
-		sprintf(name, "ESS ES488 AudioDrive (rev %d)",
-			ess_minor & 0x0f);
-		hw_config->name = name;
-		devc->model = MDL_SBPRO;
-		return 1;
-	}
-
-	/*
-	 * This the detection heuristic of ESS technology, though somewhat
-	 * changed to actually make it work.
-	 * This results in the following detection steps:
-	 * - distinct between ES688 and ES1688+ (as always done in this driver)
-	 *   if ES688 we're ready
-	 * - try to detect ES1868, ES1869 or ES1878 (ess_identify)
-	 *   if successful we're ready
-	 * - try to detect ES1888, ES1887 or ES1788 (aim: detect ES1887)
-	 *   if successful we're ready
-	 * - Dunno. Must be 1688. Will do in general
-	 *
-	 * This is the most BETA part of the software: Will the detection
-	 * always work?
-	 */
-	devc->model = MDL_ESS;
-	devc->submodel = ess_minor & 0x0f;
-
-	if (ess_major == 0x68 && (ess_minor & 0xf0) == 0x80) {
-		char *chip = NULL;
-		int submodel = -1;
-
-		switch (devc->sbmo.esstype) {
-		case ESSTYPE_DETECT:
-		case ESSTYPE_LIKE20:
-			break;
-		case 688:
-			submodel = 0x00;
-			break;
-		case 1688:
-			submodel = 0x08;
-			break;
-		case 1868:
-			submodel = SUBMDL_ES1868;
-			break;
-		case 1869:
-			submodel = SUBMDL_ES1869;
-			break;
-		case 1788:
-			submodel = SUBMDL_ES1788;
-			break;
-		case 1878:
-			submodel = SUBMDL_ES1878;
-			break;
-		case 1879:
-			submodel = SUBMDL_ES1879;
-			break;
-		case 1887:
-			submodel = SUBMDL_ES1887;
-			break;
-		case 1888:
-			submodel = SUBMDL_ES1888;
-			break;
-		default:
-			printk (KERN_ERR "Invalid esstype=%d specified\n", devc->sbmo.esstype);
-			return 0;
-		}
-		if (submodel != -1) {
-			devc->submodel = submodel;
-			sprintf (modelname, "ES%d", devc->sbmo.esstype);
-			chip = modelname;
-		}
-		if (chip == NULL && (ess_minor & 0x0f) < 8) {
-			chip = "ES688";
-		}
-#ifdef FKS_TEST
-FKS_test (devc);
-#endif
-		/*
-		 * If Nothing detected yet, and we want 2.0 behaviour...
-		 * Then let's assume it's ES1688.
-		 */
-		if (chip == NULL && devc->sbmo.esstype == ESSTYPE_LIKE20) {
-			chip = "ES1688";
-		}
-
-		if (chip == NULL) {
-			int type;
-
-			type = ess_identify (devc);
-
-			switch (type) {
-			case 0x1868:
-				chip = "ES1868";
-				devc->submodel = SUBMDL_ES1868;
-				break;
-			case 0x1869:
-				chip = "ES1869";
-				devc->submodel = SUBMDL_ES1869;
-				break;
-			case 0x1878:
-				chip = "ES1878";
-				devc->submodel = SUBMDL_ES1878;
-				break;
-			case 0x1879:
-				chip = "ES1879";
-				devc->submodel = SUBMDL_ES1879;
-				break;
-			default:
-				if ((type & 0x00ff) != ((type >> 8) & 0x00ff)) {
-					printk ("ess_init: Unrecognized %04x\n", type);
-				}
-			}
-		}
-#if 0
-		/*
-		 * this one failed:
-		 * the probing of bit 4 is another thought: from ES1788 and up, all
-		 * chips seem to have hardware volume control. Bit 4 is readonly to
-		 * check if a hardware volume interrupt has fired.
-		 * Cause ES688/ES1688 don't have this feature, bit 4 might be writeable
-		 * for these chips.
-		 */
-		if (chip == NULL && !ess_probe(devc, 0x64, (1 << 4))) {
-#endif
-		/*
-		 * the probing of bit 2 is my idea. The ES1887 docs want me to probe
-		 * bit 3. This results in ES1688 being detected as ES1788.
-		 * Bit 2 is for "Enable HWV IRQE", but as ES(1)688 chips don't have
-		 * HardWare Volume, I think they don't have this IRQE.
-		 */
-		if (chip == NULL && ess_probe(devc, 0x64, (1 << 2))) {
-			if (ess_probe (devc, 0x70, 0x7f)) {
-				if (ess_probe (devc, 0x64, (1 << 5))) {
-					chip = "ES1887";
-					devc->submodel = SUBMDL_ES1887;
-				} else {
-					chip = "ES1888";
-					devc->submodel = SUBMDL_ES1888;
-				}
-			} else {
-				chip = "ES1788";
-				devc->submodel = SUBMDL_ES1788;
-			}
-		}
-		if (chip == NULL) {
-			chip = "ES1688";
-		}
-
-		printk(KERN_INFO "ESS chip %s %s%s\n", chip,
-		       (devc->sbmo.esstype == ESSTYPE_DETECT ||
-			devc->sbmo.esstype == ESSTYPE_LIKE20) ?
-				"detected" : "specified",
-			devc->sbmo.esstype == ESSTYPE_LIKE20 ?
-				" (kernel 2.0 compatible)" : "");
-
-		sprintf(name,"ESS %s AudioDrive (rev %d)", chip, ess_minor & 0x0f);
-	} else {
-		strcpy(name, "Jazz16");
-	}
-
-	/* AAS: info stolen from ALSA: these boards have different clocks */
-	switch(devc->submodel) {
-/* APPARENTLY NOT 1869 AND 1887
-		case SUBMDL_ES1869:
-		case SUBMDL_ES1887:
-*/		
-		case SUBMDL_ES1888:
-			devc->caps |= SB_CAP_ES18XX_RATE;
-			break;
-	}
-
-	hw_config->name = name;
-	/* FKS: sb_dsp_reset to enable extended mode???? */
-	sb_dsp_reset(devc); /* Turn on extended mode */
-
-	/*
-	 *  Enable joystick and OPL3
-	 */
-	cfg = ess_getmixer (devc, 0x40);
-	ess_setmixer (devc, 0x40, cfg | 0x03);
-	if (devc->submodel >= 8) {		/* ES1688 */
-		devc->caps |= SB_NO_MIDI;   /* ES1688 uses MPU401 MIDI mode */
-	}
-	sb_dsp_reset (devc);
-
-	/*
-	 * This is important! If it's not done, the IRQ probe in sb_dsp_init
-	 * may fail.
-	 */
-	return ess_set_irq_hw (devc);
-}
-
-static int ess_set_dma_hw(sb_devc * devc)
-{
-	unsigned char cfg, dma_bits = 0, dma16_bits;
-	int dma;
-
-#ifdef FKS_LOGGING
-printk(KERN_INFO "ess_set_dma_hw: dma8=%d,dma16=%d,dup=%d\n"
-, devc->dma8, devc->dma16, devc->duplex);
-#endif
-
-	/*
-	 * FKS: It seems as if this duplex flag isn't set yet. Check it.
-	 */
-	dma = devc->dma8;
-
-	if (dma > 3 || dma < 0 || dma == 2) {
-		dma_bits = 0;
-		printk(KERN_ERR "ESS1688: Invalid DMA8 %d\n", dma);
-		return 0;
-	} else {
-		/* Extended mode DMA enable */
-		cfg = 0x50;
-
-		if (dma == 3) {
-			dma_bits = 3;
-		} else {
-			dma_bits = dma + 1;
-		}
-	}
-
-	if (!ess_write (devc, 0xb2, cfg | (dma_bits << 2))) {
-		printk(KERN_ERR "ESS1688: Failed to write to DMA config register\n");
-		return 0;
-	}
-
-	if (devc->duplex) {
-		dma = devc->dma16;
-		dma16_bits = 0;
-
-		if (dma >= 0) {
-			switch (dma) {
-			case 0:
-				dma_bits = 0x04;
-				break;
-			case 1:
-				dma_bits = 0x05;
-				break;
-			case 3:
-				dma_bits = 0x06;
-				break;
-			case 5:
-				dma_bits   = 0x07;
-				dma16_bits = 0x20;
-				break;
-			default:
-				printk(KERN_ERR "ESS1887: Invalid DMA16 %d\n", dma);
-				return 0;
-			}
-			ess_chgmixer (devc, 0x78, 0x20, dma16_bits);
-			ess_chgmixer (devc, 0x7d, 0x07, dma_bits);
-		}
-	}
-	return 1;
-}
-
-/*
- * This one is called from sb_dsp_init.
- *
- * Return values:
- *  0: Failed
- *  1: Succeeded or doesn't apply (not SUBMDL_ES1887)
- */
-int ess_dsp_init (sb_devc *devc, struct address_info *hw_config)
-{
-	/*
-	 * Caller also checks this, but anyway
-	 */
-	if (devc->model != MDL_ESS) {
-		printk (KERN_INFO "ess_dsp_init for non ESS chip\n");
-		return 1;
-	}
-	/*
-	 * This for ES1887 to run Full Duplex. Actually ES1888
-	 * is allowed to do so too. I have no idea yet if this
-	 * will work for ES1888 however.
-	 *
-	 * For SB16 having both dma8 and dma16 means enable
-	 * Full Duplex. Let's try this for ES1887 too
-	 *
-	 */
-	if (devc->submodel == SUBMDL_ES1887) {
-		if (hw_config->dma2 != -1) {
-			devc->dma16 = hw_config->dma2;
-		}
-		/*
-		 * devc->duplex initialization is put here, cause
-		 * ess_set_dma_hw needs it.
-		 */
-		if (devc->dma8 != devc->dma16 && devc->dma16 != -1) {
-			devc->duplex = 1;
-		}
-	}
-	if (!ess_set_dma_hw (devc)) {
-		free_irq(devc->irq, devc);
-		return 0;
-	}
-	return 1;
-}
-
-/****************************************************************************
- *																			*
- *									ESS mixer								*
- *																			*
- ****************************************************************************/
-
-#define ES688_RECORDING_DEVICES	\
-			( SOUND_MASK_LINE	| SOUND_MASK_MIC	| SOUND_MASK_CD		)
-#define ES688_MIXER_DEVICES		\
-			( SOUND_MASK_SYNTH	| SOUND_MASK_PCM	| SOUND_MASK_LINE	\
-			| SOUND_MASK_MIC	| SOUND_MASK_CD		| SOUND_MASK_VOLUME	\
-			| SOUND_MASK_LINE2	| SOUND_MASK_SPEAKER					)
-
-#define ES1688_RECORDING_DEVICES	\
-			( ES688_RECORDING_DEVICES					)
-#define ES1688_MIXER_DEVICES		\
-			( ES688_MIXER_DEVICES | SOUND_MASK_RECLEV	)
-
-#define ES1887_RECORDING_DEVICES	\
-			( ES1688_RECORDING_DEVICES | SOUND_MASK_LINE2 | SOUND_MASK_SYNTH)
-#define ES1887_MIXER_DEVICES		\
-			( ES1688_MIXER_DEVICES											)
-
-/*
- * Mixer registers of ES1887
- *
- * These registers specifically take care of recording levels. To make the
- * mapping from playback devices to recording devices every recording
- * devices = playback device + ES_REC_MIXER_RECDIFF
- */
-#define ES_REC_MIXER_RECBASE	(SOUND_MIXER_LINE3 + 1)
-#define ES_REC_MIXER_RECDIFF	(ES_REC_MIXER_RECBASE - SOUND_MIXER_SYNTH)
-
-#define ES_REC_MIXER_RECSYNTH	(SOUND_MIXER_SYNTH	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECPCM		(SOUND_MIXER_PCM	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECSPEAKER	(SOUND_MIXER_SPEAKER + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECLINE	(SOUND_MIXER_LINE	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECMIC		(SOUND_MIXER_MIC	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECCD		(SOUND_MIXER_CD		 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECIMIX	(SOUND_MIXER_IMIX	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECALTPCM	(SOUND_MIXER_ALTPCM	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECRECLEV	(SOUND_MIXER_RECLEV	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECIGAIN	(SOUND_MIXER_IGAIN	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECOGAIN	(SOUND_MIXER_OGAIN	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECLINE1	(SOUND_MIXER_LINE1	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECLINE2	(SOUND_MIXER_LINE2	 + ES_REC_MIXER_RECDIFF)
-#define ES_REC_MIXER_RECLINE3	(SOUND_MIXER_LINE3	 + ES_REC_MIXER_RECDIFF)
-
-static mixer_tab es688_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,			0x32, 7, 4, 0x32, 3, 4),
-MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
-MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
-MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
-};
-
-/*
- * The ES1688 specifics... hopefully correct...
- * - 6 bit master volume
- *   I was wrong, ES1888 docs say ES1688 didn't have it.
- * - RECLEV control
- * These may apply to ES688 too. I have no idea.
- */
-static mixer_tab es1688_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,			0x32, 7, 4, 0x32, 3, 4),
-MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
-MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
-MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
-MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
-};
-
-static mixer_tab es1688later_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
-MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
-MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
-MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
-MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
-};
-
-/*
- * This one is for all ESS chips with a record mixer.
- * It's not used (yet) however
- */
-static mixer_tab es_rec_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
-MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
-MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
-MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
-MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECSYNTH,		0x6b, 7, 4, 0x6b, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECPCM,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECSPEAKER,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE,		0x6e, 7, 4, 0x6e, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECMIC,		0x68, 7, 4, 0x68, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECCD,			0x6a, 7, 4, 0x6a, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECIMIX,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECALTPCM,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECRECLEV,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECIGAIN,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECOGAIN,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE1,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE2,		0x6c, 7, 4, 0x6c, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECLINE3,		0x00, 0, 0, 0x00, 0, 0)
-};
-
-/*
- * This one is for ES1887. It's little different from es_rec_mix: it
- * has 0x7c for PCM playback level. This is because ES1887 uses
- * Audio 2 for playback.
- */
-static mixer_tab es1887_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
-MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,			0x7c, 7, 4, 0x7c, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
-MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
-MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
-MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECSYNTH,		0x6b, 7, 4, 0x6b, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECPCM,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECSPEAKER,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE,		0x6e, 7, 4, 0x6e, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECMIC,		0x68, 7, 4, 0x68, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECCD,			0x6a, 7, 4, 0x6a, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECIMIX,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECALTPCM,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECRECLEV,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECIGAIN,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECOGAIN,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE1,		0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(ES_REC_MIXER_RECLINE2,		0x6c, 7, 4, 0x6c, 3, 4),
-MIX_ENT(ES_REC_MIXER_RECLINE3,		0x00, 0, 0, 0x00, 0, 0)
-};
-
-static int ess_has_rec_mixer (int submodel)
-{
-	switch (submodel) {
-	case SUBMDL_ES1887:
-		return 1;
-	default:
-		return 0;
-	}
-};
-
-#ifdef FKS_LOGGING
-static int ess_mixer_mon_regs[]
-	= { 0x70, 0x71, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7d, 0x7f
-	  , 0xa1, 0xa2, 0xa4, 0xa5, 0xa8, 0xa9
-	  , 0xb1, 0xb2, 0xb4, 0xb5, 0xb6, 0xb7, 0xb9
-	  , 0x00};
-
-static void ess_show_mixerregs (sb_devc *devc)
-{
-	int *mp = ess_mixer_mon_regs;
-
-return;
-
-	while (*mp != 0) {
-		printk (KERN_INFO "res (%x)=%x\n", *mp, (int)(ess_getmixer (devc, *mp)));
-		mp++;
-	}
-}
-#endif
-
-void ess_setmixer (sb_devc * devc, unsigned int port, unsigned int value)
-{
-	unsigned long flags;
-
-#ifdef FKS_LOGGING
-printk(KERN_INFO "FKS: write mixer %x: %x\n", port, value);
-#endif
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (port >= 0xa0) {
-		ess_write (devc, port, value);
-	} else {
-		outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
-
-		udelay(20);
-		outb(((unsigned char) (value & 0xff)), MIXER_DATA);
-		udelay(20);
-	}
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-unsigned int ess_getmixer (sb_devc * devc, unsigned int port)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	if (port >= 0xa0) {
-		val = ess_read (devc, port);
-	} else {
-		outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
-
-		udelay(20);
-		val = inb(MIXER_DATA);
-		udelay(20);
-	}
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	return val;
-}
-
-static void ess_chgmixer
-	(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
-{
-	int value;
-
-	value = ess_getmixer (devc, reg);
-	value = (value & ~mask) | (val & mask);
-	ess_setmixer (devc, reg, value);
-}
-
-/*
- * ess_mixer_init must be called from sb_mixer_init
- */
-void ess_mixer_init (sb_devc * devc)
-{
-	devc->mixer_caps = SOUND_CAP_EXCL_INPUT;
-
-	/*
-	* Take care of ES1887 specifics...
-	*/
-	switch (devc->submodel) {
-	case SUBMDL_ES1887:
-		devc->supported_devices		= ES1887_MIXER_DEVICES;
-		devc->supported_rec_devices	= ES1887_RECORDING_DEVICES;
-#ifdef FKS_LOGGING
-printk (KERN_INFO "FKS: ess_mixer_init dup = %d\n", devc->duplex);
-#endif
-		if (devc->duplex) {
-			devc->iomap				= &es1887_mix;
-			devc->iomap_sz                          = ARRAY_SIZE(es1887_mix);
-		} else {
-			devc->iomap				= &es_rec_mix;
-			devc->iomap_sz                          = ARRAY_SIZE(es_rec_mix);
-		}
-		break;
-	default:
-		if (devc->submodel < 8) {
-			devc->supported_devices		= ES688_MIXER_DEVICES;
-			devc->supported_rec_devices	= ES688_RECORDING_DEVICES;
-			devc->iomap					= &es688_mix;
-			devc->iomap_sz                                  = ARRAY_SIZE(es688_mix);
-		} else {
-			/*
-			 * es1688 has 4 bits master vol.
-			 * later chips have 6 bits (?)
-			 */
-			devc->supported_devices		= ES1688_MIXER_DEVICES;
-			devc->supported_rec_devices	= ES1688_RECORDING_DEVICES;
-			if (devc->submodel < 0x10) {
-				devc->iomap				= &es1688_mix;
-				devc->iomap_sz                          = ARRAY_SIZE(es688_mix);
-			} else {
-				devc->iomap				= &es1688later_mix;
-				devc->iomap_sz                          = ARRAY_SIZE(es1688later_mix);
-			}
-		}
-	}
-}
-
-/*
- * Changing playback levels at an ESS chip with record mixer means having to
- * take care of recording levels of recorded inputs (devc->recmask) too!
- */
-int ess_mixer_set(sb_devc *devc, int dev, int left, int right)
-{
-	if (ess_has_rec_mixer (devc->submodel) && (devc->recmask & (1 << dev))) {
-		sb_common_mixer_set (devc, dev + ES_REC_MIXER_RECDIFF, left, right);
-	}
-	return sb_common_mixer_set (devc, dev, left, right);
-}
-
-/*
- * After a sb_dsp_reset extended register 0xb4 (RECLEV) is reset too. After
- * sb_dsp_reset RECLEV has to be restored. This is where ess_mixer_reload
- * helps.
- */
-void ess_mixer_reload (sb_devc *devc, int dev)
-{
-	int left, right, value;
-
-	value = devc->levels[dev];
-	left  = value & 0x000000ff;
-	right = (value & 0x0000ff00) >> 8;
-
-	sb_common_mixer_set(devc, dev, left, right);
-}
-
-static int es_rec_set_recmask(sb_devc * devc, int mask)
-{
-	int i, i_mask, cur_mask, diff_mask;
-	int value, left, right;
-
-#ifdef FKS_LOGGING
-printk (KERN_INFO "FKS: es_rec_set_recmask mask = %x\n", mask);
-#endif
-	/*
-	 * Changing the recmask on an ESS chip with recording mixer means:
-	 * (1) Find the differences
-	 * (2) For "turned-on"  inputs: make the recording level the playback level
-	 * (3) For "turned-off" inputs: make the recording level zero
-	 */
-	cur_mask  = devc->recmask;
-	diff_mask = (cur_mask ^ mask);
-
-	for (i = 0; i < 32; i++) {
-		i_mask = (1 << i);
-		if (diff_mask & i_mask) {	/* Difference? (1)  */
-			if (mask & i_mask) {	/* Turn it on  (2)  */
-				value = devc->levels[i];
-				left  = value & 0x000000ff;
-				right = (value & 0x0000ff00) >> 8;
-			} else {				/* Turn it off (3)  */
-				left  = 0;
-				right = 0;
-			}
-			sb_common_mixer_set(devc, i + ES_REC_MIXER_RECDIFF, left, right);
-		}
-	}
-	return mask;
-}
-
-int ess_set_recmask(sb_devc * devc, int *mask)
-{
-	/* This applies to ESS chips with record mixers only! */
-
-	if (ess_has_rec_mixer (devc->submodel)) {
-		*mask	= es_rec_set_recmask (devc, *mask);
-		return 1;									/* Applied		*/
-	} else {
-		return 0;									/* Not applied	*/
-	}
-}
-
-/*
- * ess_mixer_reset must be called from sb_mixer_reset
- */
-int ess_mixer_reset (sb_devc * devc)
-{
-	/*
-	 * Separate actions for ESS chips with a record mixer:
-	 */
-	if (ess_has_rec_mixer (devc->submodel)) {
-		switch (devc->submodel) {
-		case SUBMDL_ES1887:
-			/*
-			 * Separate actions for ES1887:
-			 * Change registers 7a and 1c to make the record mixer the
-			 * actual recording source.
-			 */
-			ess_chgmixer(devc, 0x7a, 0x18, 0x08);
-			ess_chgmixer(devc, 0x1c, 0x07, 0x07);
-			break;
-		}
-		/*
-		 * Call set_recmask for proper initialization
-		 */
-		devc->recmask = devc->supported_rec_devices;
-		es_rec_set_recmask(devc, 0);
-		devc->recmask = 0;
-
-		return 1;	/* We took care of recmask.				*/
-	} else {
-		return 0;	/* We didn't take care; caller do it	*/
-	}
-}
-
-/****************************************************************************
- *																			*
- *								ESS midi									*
- *																			*
- ****************************************************************************/
-
-/*
- * FKS: IRQ may be shared. Hm. And if so? Then What?
- */
-int ess_midi_init(sb_devc * devc, struct address_info *hw_config)
-{
-	unsigned char   cfg, tmp;
-
-	cfg = ess_getmixer (devc, 0x40) & 0x03;
-
-	if (devc->submodel < 8) {
-		ess_setmixer (devc, 0x40, cfg | 0x03);	/* Enable OPL3 & joystick */
-		return 0;  					 /* ES688 doesn't support MPU401 mode */
-	}
-	tmp = (hw_config->io_base & 0x0f0) >> 4;
-
-	if (tmp > 3) {
-		ess_setmixer (devc, 0x40, cfg);
-		return 0;
-	}
-	cfg |= tmp << 3;
-
-	tmp = 1;		/* MPU enabled without interrupts */
-
-	/* May be shared: if so the value is -ve */
-
-	switch (abs(hw_config->irq)) {
-		case 9:
-			tmp = 0x4;
-			break;
-		case 5:
-			tmp = 0x5;
-			break;
-		case 7:
-			tmp = 0x6;
-			break;
-		case 10:
-			tmp = 0x7;
-			break;
-		default:
-			return 0;
-	}
-
-	cfg |= tmp << 5;
-	ess_setmixer (devc, 0x40, cfg | 0x03);
-
-	return 1;
-}
-
diff --git a/sound/oss/sb_ess.h b/sound/oss/sb_ess.h
deleted file mode 100644
index 38aa072e01f2..000000000000
--- a/sound/oss/sb_ess.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Created: 9-Jan-1999 Rolf Fokkens
- */
-
-extern void ess_intr
-		(sb_devc *devc);
-extern int ess_dsp_init
-		(sb_devc *devc, struct address_info *hw_config);
-
-extern struct audio_driver *ess_audio_init
-		(sb_devc *devc, int *audio_flags, int *format_mask);
-extern int ess_midi_init
-		(sb_devc *devc, struct address_info *hw_config);
-extern void ess_mixer_init
-		(sb_devc *devc);
-
-extern int ess_init
-		(sb_devc *devc, struct address_info *hw_config);
-extern int ess_dsp_reset
-		(sb_devc *devc);
-
-extern void ess_setmixer
-		(sb_devc *devc, unsigned int port, unsigned int value);
-extern unsigned int ess_getmixer
-		(sb_devc *devc, unsigned int port);
-extern int ess_mixer_set
-		(sb_devc *devc, int dev, int left, int right);
-extern int ess_mixer_reset
-		(sb_devc *devc);
-extern void ess_mixer_reload
-		(sb_devc * devc, int dev);
-extern int ess_set_recmask
-		(sb_devc *devc, int *mask);
-
diff --git a/sound/oss/sb_midi.c b/sound/oss/sb_midi.c
deleted file mode 100644
index 551ee7557b4e..000000000000
--- a/sound/oss/sb_midi.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * sound/oss/sb_midi.c
- *
- * The low level driver for the Sound Blaster DS chips.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#include "sound_config.h"
-
-#include "sb.h"
-#undef SB_TEST_IRQ
-
-/*
- * The DSP channel can be used either for input or output. Variable
- * 'sb_irq_mode' will be set when the program calls read or write first time
- * after open. Current version doesn't support mode changes without closing
- * and reopening the device. Support for this feature may be implemented in a
- * future version of this driver.
- */
-
-
-static int sb_midi_open(int dev, int mode,
-	     void            (*input) (int dev, unsigned char data),
-	     void            (*output) (int dev)
-)
-{
-	sb_devc *devc = midi_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-		return -ENXIO;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (devc->opened)
-	{
-		spin_unlock_irqrestore(&devc->lock, flags);
-		return -EBUSY;
-	}
-	devc->opened = 1;
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->irq_mode = IMODE_MIDI;
-	devc->midi_broken = 0;
-
-	sb_dsp_reset(devc);
-
-	if (!sb_dsp_command(devc, 0x35))	/* Start MIDI UART mode */
-	{
-		  devc->opened = 0;
-		  return -EIO;
-	}
-	devc->intr_active = 1;
-
-	if (mode & OPEN_READ)
-	{
-		devc->input_opened = 1;
-		devc->midi_input_intr = input;
-	}
-	return 0;
-}
-
-static void sb_midi_close(int dev)
-{
-	sb_devc *devc = midi_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-		return;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	sb_dsp_reset(devc);
-	devc->intr_active = 0;
-	devc->input_opened = 0;
-	devc->opened = 0;
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-static int sb_midi_out(int dev, unsigned char midi_byte)
-{
-	sb_devc *devc = midi_devs[dev]->devc;
-
-	if (devc == NULL)
-		return 1;
-
-	if (devc->midi_broken)
-		return 1;
-
-	if (!sb_dsp_command(devc, midi_byte))
-	{
-		devc->midi_broken = 1;
-		return 1;
-	}
-	return 1;
-}
-
-static int sb_midi_start_read(int dev)
-{
-	return 0;
-}
-
-static int sb_midi_end_read(int dev)
-{
-	sb_devc *devc = midi_devs[dev]->devc;
-
-	if (devc == NULL)
-		return -ENXIO;
-
-	sb_dsp_reset(devc);
-	devc->intr_active = 0;
-	return 0;
-}
-
-static int sb_midi_ioctl(int dev, unsigned cmd, void __user *arg)
-{
-        return -EINVAL;
-}
-
-void sb_midi_interrupt(sb_devc * devc)
-{
-	unsigned long   flags;
-	unsigned char   data;
-
-	if (devc == NULL)
-		return;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	data = inb(DSP_READ);
-	if (devc->input_opened)
-		devc->midi_input_intr(devc->my_mididev, data);
-
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-#define MIDI_SYNTH_NAME	"Sound Blaster Midi"
-#define MIDI_SYNTH_CAPS	0
-#include "midi_synth.h"
-
-static struct midi_operations sb_midi_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"Sound Blaster", 0, 0, SNDCARD_SB},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= sb_midi_open,
-	.close		= sb_midi_close,
-	.ioctl		= sb_midi_ioctl,
-	.outputc	= sb_midi_out,
-	.start_read	= sb_midi_start_read,
-	.end_read	= sb_midi_end_read,
-};
-
-void sb_dsp_midi_init(sb_devc * devc, struct module *owner)
-{
-	int dev;
-
-	if (devc->model < 2)	/* No MIDI support for SB 1.x */
-		return;
-
-	dev = sound_alloc_mididev();
-
-	if (dev == -1)
-	{
-		printk(KERN_ERR "sb_midi: too many MIDI devices detected\n");
-		return;
-	}
-	std_midi_synth.midi_dev = devc->my_mididev = dev;
-	midi_devs[dev] = kmalloc(sizeof(struct midi_operations), GFP_KERNEL);
-	if (midi_devs[dev] == NULL)
-	{
-		printk(KERN_WARNING "Sound Blaster:  failed to allocate MIDI memory.\n");
-		sound_unload_mididev(dev);
-		return;
-	}
-	memcpy((char *) midi_devs[dev], (char *) &sb_midi_operations,
-	       sizeof(struct midi_operations));
-
-	if (owner)
-		midi_devs[dev]->owner = owner;
-
-	midi_devs[dev]->devc = devc;
-
-
-	midi_devs[dev]->converter = kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
-	if (midi_devs[dev]->converter == NULL)
-	{
-		  printk(KERN_WARNING "Sound Blaster:  failed to allocate MIDI memory.\n");
-		  kfree(midi_devs[dev]);
-		  sound_unload_mididev(dev);
-		  return;
-	}
-	memcpy((char *) midi_devs[dev]->converter, (char *) &std_midi_synth,
-	       sizeof(struct synth_operations));
-
-	midi_devs[dev]->converter->id = "SBMIDI";
-	sequencer_init();
-}
diff --git a/sound/oss/sb_mixer.c b/sound/oss/sb_mixer.c
deleted file mode 100644
index acf7586aeb47..000000000000
--- a/sound/oss/sb_mixer.c
+++ /dev/null
@@ -1,770 +0,0 @@
-/*
- * sound/oss/sb_mixer.c
- *
- * The low level mixer driver for the Sound Blaster compatible cards.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer				: ioctl code reworked (vmalloc/vfree removed)
- * Rolf Fokkens (Dec 20 1998)	: Moved ESS stuff into sb_ess.[ch]
- * Stanislav Voronyi <stas@esc.kharkov.com>	: Support for AWE 3DSE device (Jun 7 1999)
- */
-
-#include <linux/slab.h>
-
-#include "sound_config.h"
-
-#define __SB_MIXER_C__
-
-#include "sb.h"
-#include "sb_mixer.h"
-
-#include "sb_ess.h"
-
-#define SBPRO_RECORDING_DEVICES	(SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD)
-
-/* Same as SB Pro, unless I find otherwise */
-#define SGNXPRO_RECORDING_DEVICES SBPRO_RECORDING_DEVICES
-
-#define SBPRO_MIXER_DEVICES		(SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD | SOUND_MASK_VOLUME)
-
-/* SG NX Pro has treble and bass settings on the mixer. The 'speaker'
- * channel is the COVOX/DisneySoundSource emulation volume control
- * on the mixer. It does NOT control speaker volume. Should have own
- * mask eventually?
- */
-#define SGNXPRO_MIXER_DEVICES	(SBPRO_MIXER_DEVICES|SOUND_MASK_BASS| \
-				 SOUND_MASK_TREBLE|SOUND_MASK_SPEAKER )
-
-#define SB16_RECORDING_DEVICES		(SOUND_MASK_SYNTH | SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD)
-
-#define SB16_OUTFILTER_DEVICES		(SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD)
-
-#define SB16_MIXER_DEVICES		(SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \
-					 SOUND_MASK_CD | \
-					 SOUND_MASK_IGAIN | SOUND_MASK_OGAIN | \
-					 SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | \
-					SOUND_MASK_IMIX)
-
-/* These are the only devices that are working at the moment.  Others could
- * be added once they are identified and a method is found to control them.
- */
-#define ALS007_MIXER_DEVICES	(SOUND_MASK_SYNTH | SOUND_MASK_LINE | \
-				 SOUND_MASK_PCM | SOUND_MASK_MIC | \
-				 SOUND_MASK_CD | \
-				 SOUND_MASK_VOLUME)
-
-static mixer_tab sbpro_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,	0x22, 7, 4, 0x22, 3, 4),
-MIX_ENT(SOUND_MIXER_BASS,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,	0x26, 7, 4, 0x26, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,	0x04, 7, 4, 0x04, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,	0x2e, 7, 4, 0x2e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,	0x0a, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_CD,		0x28, 7, 4, 0x28, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,	0x00, 0, 0, 0x00, 0, 0)
-};
-
-static mixer_tab sb16_mix = {
-MIX_ENT(SOUND_MIXER_VOLUME,	0x30, 7, 5, 0x31, 7, 5),
-MIX_ENT(SOUND_MIXER_BASS,	0x46, 7, 4, 0x47, 7, 4),
-MIX_ENT(SOUND_MIXER_TREBLE,	0x44, 7, 4, 0x45, 7, 4),
-MIX_ENT(SOUND_MIXER_SYNTH,	0x34, 7, 5, 0x35, 7, 5),
-MIX_ENT(SOUND_MIXER_PCM,	0x32, 7, 5, 0x33, 7, 5),
-MIX_ENT(SOUND_MIXER_SPEAKER,	0x3b, 7, 2, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,	0x38, 7, 5, 0x39, 7, 5),
-MIX_ENT(SOUND_MIXER_MIC,	0x3a, 7, 5, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_CD,		0x36, 7, 5, 0x37, 7, 5),
-MIX_ENT(SOUND_MIXER_IMIX,	0x3c, 0, 1, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,	0x3f, 7, 2, 0x40, 7, 2), /* Obsolete. Use IGAIN */
-MIX_ENT(SOUND_MIXER_IGAIN,	0x3f, 7, 2, 0x40, 7, 2),
-MIX_ENT(SOUND_MIXER_OGAIN,	0x41, 7, 2, 0x42, 7, 2)
-};
-
-static mixer_tab als007_mix = 
-{
-MIX_ENT(SOUND_MIXER_VOLUME,	0x62, 7, 4, 0x62, 3, 4),
-MIX_ENT(SOUND_MIXER_BASS,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_TREBLE,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_SYNTH,	0x66, 7, 4, 0x66, 3, 4),
-MIX_ENT(SOUND_MIXER_PCM,	0x64, 7, 4, 0x64, 3, 4),
-MIX_ENT(SOUND_MIXER_SPEAKER,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_LINE,	0x6e, 7, 4, 0x6e, 3, 4),
-MIX_ENT(SOUND_MIXER_MIC,	0x6a, 2, 3, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_CD,		0x68, 7, 4, 0x68, 3, 4),
-MIX_ENT(SOUND_MIXER_IMIX,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_ALTPCM,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_RECLEV,	0x00, 0, 0, 0x00, 0, 0), /* Obsolete. Use IGAIN */
-MIX_ENT(SOUND_MIXER_IGAIN,	0x00, 0, 0, 0x00, 0, 0),
-MIX_ENT(SOUND_MIXER_OGAIN,	0x00, 0, 0, 0x00, 0, 0)
-};
-
-
-/* SM_GAMES          Master volume is lower and PCM & FM volumes
-			     higher than with SB Pro. This improves the
-			     sound quality */
-
-static int smg_default_levels[32] =
-{
-  0x2020,			/* Master Volume */
-  0x4b4b,			/* Bass */
-  0x4b4b,			/* Treble */
-  0x6464,			/* FM */
-  0x6464,			/* PCM */
-  0x4b4b,			/* PC Speaker */
-  0x4b4b,			/* Ext Line */
-  0x0000,			/* Mic */
-  0x4b4b,			/* CD */
-  0x4b4b,			/* Recording monitor */
-  0x4b4b,			/* SB PCM */
-  0x4b4b,			/* Recording level */
-  0x4b4b,			/* Input gain */
-  0x4b4b,			/* Output gain */
-  0x4040,			/* Line1 */
-  0x4040,			/* Line2 */
-  0x1515			/* Line3 */
-};
-
-static int sb_default_levels[32] =
-{
-  0x5a5a,			/* Master Volume */
-  0x4b4b,			/* Bass */
-  0x4b4b,			/* Treble */
-  0x4b4b,			/* FM */
-  0x4b4b,			/* PCM */
-  0x4b4b,			/* PC Speaker */
-  0x4b4b,			/* Ext Line */
-  0x1010,			/* Mic */
-  0x4b4b,			/* CD */
-  0x0000,			/* Recording monitor */
-  0x4b4b,			/* SB PCM */
-  0x4b4b,			/* Recording level */
-  0x4b4b,			/* Input gain */
-  0x4b4b,			/* Output gain */
-  0x4040,			/* Line1 */
-  0x4040,			/* Line2 */
-  0x1515			/* Line3 */
-};
-
-static unsigned char sb16_recmasks_L[SOUND_MIXER_NRDEVICES] =
-{
-	0x00,	/* SOUND_MIXER_VOLUME	*/
-	0x00,	/* SOUND_MIXER_BASS	*/
-	0x00,	/* SOUND_MIXER_TREBLE	*/
-	0x40,	/* SOUND_MIXER_SYNTH	*/
-	0x00,	/* SOUND_MIXER_PCM	*/
-	0x00,	/* SOUND_MIXER_SPEAKER	*/
-	0x10,	/* SOUND_MIXER_LINE	*/
-	0x01,	/* SOUND_MIXER_MIC	*/
-	0x04,	/* SOUND_MIXER_CD	*/
-	0x00,	/* SOUND_MIXER_IMIX	*/
-	0x00,	/* SOUND_MIXER_ALTPCM	*/
-	0x00,	/* SOUND_MIXER_RECLEV	*/
-	0x00,	/* SOUND_MIXER_IGAIN	*/
-	0x00	/* SOUND_MIXER_OGAIN	*/
-};
-
-static unsigned char sb16_recmasks_R[SOUND_MIXER_NRDEVICES] =
-{
-	0x00,	/* SOUND_MIXER_VOLUME	*/
-	0x00,	/* SOUND_MIXER_BASS	*/
-	0x00,	/* SOUND_MIXER_TREBLE	*/
-	0x20,	/* SOUND_MIXER_SYNTH	*/
-	0x00,	/* SOUND_MIXER_PCM	*/
-	0x00,	/* SOUND_MIXER_SPEAKER	*/
-	0x08,	/* SOUND_MIXER_LINE	*/
-	0x01,	/* SOUND_MIXER_MIC	*/
-	0x02,	/* SOUND_MIXER_CD	*/
-	0x00,	/* SOUND_MIXER_IMIX	*/
-	0x00,	/* SOUND_MIXER_ALTPCM	*/
-	0x00,	/* SOUND_MIXER_RECLEV	*/
-	0x00,	/* SOUND_MIXER_IGAIN	*/
-	0x00	/* SOUND_MIXER_OGAIN	*/
-};
-
-static char     smw_mix_regs[] =	/* Left mixer registers */
-{
-  0x0b,				/* SOUND_MIXER_VOLUME */
-  0x0d,				/* SOUND_MIXER_BASS */
-  0x0d,				/* SOUND_MIXER_TREBLE */
-  0x05,				/* SOUND_MIXER_SYNTH */
-  0x09,				/* SOUND_MIXER_PCM */
-  0x00,				/* SOUND_MIXER_SPEAKER */
-  0x03,				/* SOUND_MIXER_LINE */
-  0x01,				/* SOUND_MIXER_MIC */
-  0x07,				/* SOUND_MIXER_CD */
-  0x00,				/* SOUND_MIXER_IMIX */
-  0x00,				/* SOUND_MIXER_ALTPCM */
-  0x00,				/* SOUND_MIXER_RECLEV */
-  0x00,				/* SOUND_MIXER_IGAIN */
-  0x00,				/* SOUND_MIXER_OGAIN */
-  0x00,				/* SOUND_MIXER_LINE1 */
-  0x00,				/* SOUND_MIXER_LINE2 */
-  0x00				/* SOUND_MIXER_LINE3 */
-};
-
-static int      sbmixnum = 1;
-
-static void     sb_mixer_reset(sb_devc * devc);
-
-void sb_mixer_set_stereo(sb_devc * devc, int mode)
-{
-	sb_chgmixer(devc, OUT_FILTER, STEREO_DAC, (mode ? STEREO_DAC : MONO_DAC));
-}
-
-static int detect_mixer(sb_devc * devc)
-{
-	/* Just trust the mixer is there */
-	return 1;
-}
-
-static void oss_change_bits(sb_devc *devc, unsigned char *regval, int dev, int chn, int newval)
-{
-	unsigned char mask;
-	int shift;
-
-	mask = (1 << (*devc->iomap)[dev][chn].nbits) - 1;
-	newval = (int) ((newval * mask) + 50) / 100;	/* Scale */
-
-	shift = (*devc->iomap)[dev][chn].bitoffs - (*devc->iomap)[dev][LEFT_CHN].nbits + 1;
-
-	*regval &= ~(mask << shift);	/* Mask out previous value */
-	*regval |= (newval & mask) << shift;	/* Set the new value */
-}
-
-static int sb_mixer_get(sb_devc * devc, int dev)
-{
-	if (!((1 << dev) & devc->supported_devices))
-		return -EINVAL;
-	return devc->levels[dev];
-}
-
-void smw_mixer_init(sb_devc * devc)
-{
-	int i;
-
-	sb_setmixer(devc, 0x00, 0x18);	/* Mute unused (Telephone) line */
-	sb_setmixer(devc, 0x10, 0x38);	/* Config register 2 */
-
-	devc->supported_devices = 0;
-	for (i = 0; i < sizeof(smw_mix_regs); i++)
-		if (smw_mix_regs[i] != 0)
-			devc->supported_devices |= (1 << i);
-
-	devc->supported_rec_devices = devc->supported_devices &
-		~(SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_PCM | SOUND_MASK_VOLUME);
-	sb_mixer_reset(devc);
-}
-
-int sb_common_mixer_set(sb_devc * devc, int dev, int left, int right)
-{
-	int regoffs;
-	unsigned char val;
-
-	if ((dev < 0) || (dev >= devc->iomap_sz))
-		return -EINVAL;
-
-	regoffs = (*devc->iomap)[dev][LEFT_CHN].regno;
-
-	if (regoffs == 0)
-		return -EINVAL;
-
-	val = sb_getmixer(devc, regoffs);
-	oss_change_bits(devc, &val, dev, LEFT_CHN, left);
-
-	if ((*devc->iomap)[dev][RIGHT_CHN].regno != regoffs)	/*
-								 * Change register
-								 */
-	{
-		sb_setmixer(devc, regoffs, val);	/*
-							 * Save the old one
-							 */
-		regoffs = (*devc->iomap)[dev][RIGHT_CHN].regno;
-
-		if (regoffs == 0)
-			return left | (left << 8);	/*
-							 * Just left channel present
-							 */
-
-		val = sb_getmixer(devc, regoffs);	/*
-							 * Read the new one
-							 */
-	}
-	oss_change_bits(devc, &val, dev, RIGHT_CHN, right);
-
-	sb_setmixer(devc, regoffs, val);
-
-	return left | (right << 8);
-}
-
-static int smw_mixer_set(sb_devc * devc, int dev, int left, int right)
-{
-	int reg, val;
-
-	switch (dev)
-	{
-		case SOUND_MIXER_VOLUME:
-			sb_setmixer(devc, 0x0b, 96 - (96 * left / 100));	/* 96=mute, 0=max */
-			sb_setmixer(devc, 0x0c, 96 - (96 * right / 100));
-			break;
-
-		case SOUND_MIXER_BASS:
-		case SOUND_MIXER_TREBLE:
-			devc->levels[dev] = left | (right << 8);
-			/* Set left bass and treble values */
-			val = ((devc->levels[SOUND_MIXER_TREBLE] & 0xff) * 16 / (unsigned) 100) << 4;
-			val |= ((devc->levels[SOUND_MIXER_BASS] & 0xff) * 16 / (unsigned) 100) & 0x0f;
-			sb_setmixer(devc, 0x0d, val);
-
-			/* Set right bass and treble values */
-			val = (((devc->levels[SOUND_MIXER_TREBLE] >> 8) & 0xff) * 16 / (unsigned) 100) << 4;
-			val |= (((devc->levels[SOUND_MIXER_BASS] >> 8) & 0xff) * 16 / (unsigned) 100) & 0x0f;
-			sb_setmixer(devc, 0x0e, val);
-		
-			break;
-
-		default:
-			/* bounds check */
-			if (dev < 0 || dev >= ARRAY_SIZE(smw_mix_regs))
-				return -EINVAL;
-			reg = smw_mix_regs[dev];
-			if (reg == 0)
-				return -EINVAL;
-			sb_setmixer(devc, reg, (24 - (24 * left / 100)) | 0x20);	/* 24=mute, 0=max */
-			sb_setmixer(devc, reg + 1, (24 - (24 * right / 100)) | 0x40);
-	}
-
-	devc->levels[dev] = left | (right << 8);
-	return left | (right << 8);
-}
-
-static int sb_mixer_set(sb_devc * devc, int dev, int value)
-{
-	int left = value & 0x000000ff;
-	int right = (value & 0x0000ff00) >> 8;
-	int retval;
-
-	if (left > 100)
-		left = 100;
-	if (right > 100)
-		right = 100;
-
-	if ((dev < 0) || (dev > 31))
-		return -EINVAL;
-
-	if (!(devc->supported_devices & (1 << dev)))	/*
-							 * Not supported
-							 */
-		return -EINVAL;
-
-	/* Differentiate depending on the chipsets */
-	switch (devc->model) {
-	case MDL_SMW:
-		retval = smw_mixer_set(devc, dev, left, right);
-		break;
-	case MDL_ESS:
-		retval = ess_mixer_set(devc, dev, left, right);
-		break;
-	default:
-		retval = sb_common_mixer_set(devc, dev, left, right);
-	}
-	if (retval >= 0) devc->levels[dev] = retval;
-
-	return retval;
-}
-
-/*
- * set_recsrc doesn't apply to ES188x
- */
-static void set_recsrc(sb_devc * devc, int src)
-{
-	sb_setmixer(devc, RECORD_SRC, (sb_getmixer(devc, RECORD_SRC) & ~7) | (src & 0x7));
-}
-
-static int set_recmask(sb_devc * devc, int mask)
-{
-	int devmask, i;
-	unsigned char  regimageL, regimageR;
-
-	devmask = mask & devc->supported_rec_devices;
-
-	switch (devc->model)
-	{
-		case MDL_SBPRO:
-		case MDL_ESS:
-		case MDL_JAZZ:
-		case MDL_SMW:
-			if (devc->model == MDL_ESS && ess_set_recmask (devc, &devmask)) {
-				break;
-			}
-			if (devmask != SOUND_MASK_MIC &&
-				devmask != SOUND_MASK_LINE &&
-				devmask != SOUND_MASK_CD)
-			{
-				/*
-				 * More than one device selected. Drop the
-				 * previous selection
-				 */
-				devmask &= ~devc->recmask;
-			}
-			if (devmask != SOUND_MASK_MIC &&
-				devmask != SOUND_MASK_LINE &&
-				devmask != SOUND_MASK_CD)
-			{
-				/*
-				 * More than one device selected. Default to
-				 * mic
-				 */
-				devmask = SOUND_MASK_MIC;
-			}
-			if (devmask ^ devc->recmask)	/*
-							 *	Input source changed
-							 */
-			{
-				switch (devmask)
-				{
-					case SOUND_MASK_MIC:
-						set_recsrc(devc, SRC__MIC);
-						break;
-
-					case SOUND_MASK_LINE:
-						set_recsrc(devc, SRC__LINE);
-						break;
-
-					case SOUND_MASK_CD:
-						set_recsrc(devc, SRC__CD);
-						break;
-
-					default:
-						set_recsrc(devc, SRC__MIC);
-				}
-			}
-			break;
-
-		case MDL_SB16:
-			if (!devmask)
-				devmask = SOUND_MASK_MIC;
-
-			if (devc->submodel == SUBMDL_ALS007) 
-			{
-				switch (devmask) 
-				{
-					case SOUND_MASK_LINE:
-						sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_LINE);
-						break;
-					case SOUND_MASK_CD:
-						sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_CD);
-						break;
-					case SOUND_MASK_SYNTH:
-						sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_SYNTH);
-						break;
-					default:           /* Also takes care of SOUND_MASK_MIC case */
-						sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_MIC);
-						break;
-				}
-			}
-			else
-			{
-				regimageL = regimageR = 0;
-				for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-				{
-					if ((1 << i) & devmask)
-					{
-						regimageL |= sb16_recmasks_L[i];
-						regimageR |= sb16_recmasks_R[i];
-					}
-					sb_setmixer (devc, SB16_IMASK_L, regimageL);
-					sb_setmixer (devc, SB16_IMASK_R, regimageR);
-				}
-			}
-			break;
-	}
-	devc->recmask = devmask;
-	return devc->recmask;
-}
-
-static int set_outmask(sb_devc * devc, int mask)
-{
-	int devmask, i;
-	unsigned char  regimage;
-
-	devmask = mask & devc->supported_out_devices;
-
-	switch (devc->model)
-	{
-		case MDL_SB16:
-			if (devc->submodel == SUBMDL_ALS007) 
-				break;
-			else
-			{
-				regimage = 0;
-				for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-				{
-					if ((1 << i) & devmask)
-					{
-						regimage |= (sb16_recmasks_L[i] | sb16_recmasks_R[i]);
-					}
-					sb_setmixer (devc, SB16_OMASK, regimage);
-				}
-			}
-			break;
-		default:
-			break;
-	}
-
-	devc->outmask = devmask;
-	return devc->outmask;
-}
-
-static int sb_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	sb_devc *devc = mixer_devs[dev]->devc;
-	int val, ret;
-	int __user *p = arg;
-
-	/*
-	 * Use ioctl(fd, SOUND_MIXER_AGC, &mode) to turn AGC off (0) or on (1).
-	 * Use ioctl(fd, SOUND_MIXER_3DSE, &mode) to turn 3DSE off (0) or on (1)
-	 *					      or mode==2 put 3DSE state to mode.
-	 */
-	if (devc->model == MDL_SB16) {
-		if (cmd == SOUND_MIXER_AGC) 
-		{
-			if (get_user(val, p))
-				return -EFAULT;
-			sb_setmixer(devc, 0x43, (~val) & 0x01);
-			return 0;
-		}
-		if (cmd == SOUND_MIXER_3DSE) 
-		{
-			/* I put here 15, but I don't know the exact version.
-			   At least my 4.13 havn't 3DSE, 4.16 has it. */
-			if (devc->minor < 15)
-				return -EINVAL;
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val == 0 || val == 1)
-				sb_chgmixer(devc, AWE_3DSE, 0x01, val);
-			else if (val == 2)
-			{
-				ret = sb_getmixer(devc, AWE_3DSE)&0x01;
-				return put_user(ret, p);
-			}
-			else
-				return -EINVAL;
-			return 0;
-		}
-	}
-	if (((cmd >> 8) & 0xff) == 'M') 
-	{
-		if (_SIOC_DIR(cmd) & _SIOC_WRITE) 
-		{
-			if (get_user(val, p))
-				return -EFAULT;
-			switch (cmd & 0xff) 
-			{
-				case SOUND_MIXER_RECSRC:
-					ret = set_recmask(devc, val);
-					break;
-
-				case SOUND_MIXER_OUTSRC:
-					ret = set_outmask(devc, val);
-					break;
-
-				default:
-					ret = sb_mixer_set(devc, cmd & 0xff, val);
-			}
-		}
-		else switch (cmd & 0xff) 
-		{
-			case SOUND_MIXER_RECSRC:
-				ret = devc->recmask;
-				break;
-				  
-			case SOUND_MIXER_OUTSRC:
-				ret = devc->outmask;
-				break;
-				  
-			case SOUND_MIXER_DEVMASK:
-				ret = devc->supported_devices;
-				break;
-				  
-			case SOUND_MIXER_STEREODEVS:
-				ret = devc->supported_devices;
-				/* The ESS seems to have stereo mic controls */
-				if (devc->model == MDL_ESS)
-					ret &= ~(SOUND_MASK_SPEAKER|SOUND_MASK_IMIX);
-				else if (devc->model != MDL_JAZZ && devc->model != MDL_SMW)
-					ret &= ~(SOUND_MASK_MIC | SOUND_MASK_SPEAKER | SOUND_MASK_IMIX);
-				break;
-				  
-			case SOUND_MIXER_RECMASK:
-				ret = devc->supported_rec_devices;
-				break;
-				  
-			case SOUND_MIXER_OUTMASK:
-				ret = devc->supported_out_devices;
-				break;
-				  
-			case SOUND_MIXER_CAPS:
-				ret = devc->mixer_caps;
-				break;
-				    
-			default:
-				ret = sb_mixer_get(devc, cmd & 0xff);
-				break;
-		}
-		return put_user(ret, p); 
-	} else
-		return -EINVAL;
-}
-
-static struct mixer_operations sb_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "SB",
-	.name	= "Sound Blaster",
-	.ioctl	= sb_mixer_ioctl
-};
-
-static struct mixer_operations als007_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "ALS007",
-	.name	= "Avance ALS-007",
-	.ioctl	= sb_mixer_ioctl
-};
-
-static void sb_mixer_reset(sb_devc * devc)
-{
-	char name[32];
-	int i;
-
-	sprintf(name, "SB_%d", devc->sbmixnum);
-
-	if (devc->sbmo.sm_games)
-		devc->levels = load_mixer_volumes(name, smg_default_levels, 1);
-	else
-		devc->levels = load_mixer_volumes(name, sb_default_levels, 1);
-
-	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-		sb_mixer_set(devc, i, devc->levels[i]);
-
-	if (devc->model != MDL_ESS || !ess_mixer_reset (devc)) {
-		set_recmask(devc, SOUND_MASK_MIC);
-	}
-}
-
-int sb_mixer_init(sb_devc * devc, struct module *owner)
-{
-	int mixer_type = 0;
-	int m;
-
-	devc->sbmixnum = sbmixnum++;
-	devc->levels = NULL;
-
-	sb_setmixer(devc, 0x00, 0);	/* Reset mixer */
-
-	if (!(mixer_type = detect_mixer(devc)))
-		return 0;	/* No mixer. Why? */
-
-	switch (devc->model)
-	{
-		case MDL_ESSPCI:
-		case MDL_YMPCI:
-		case MDL_SBPRO:
-		case MDL_AZTECH:
-		case MDL_JAZZ:
-			devc->mixer_caps = SOUND_CAP_EXCL_INPUT;
-			devc->supported_devices = SBPRO_MIXER_DEVICES;
-			devc->supported_rec_devices = SBPRO_RECORDING_DEVICES;
-			devc->iomap = &sbpro_mix;
-			devc->iomap_sz = ARRAY_SIZE(sbpro_mix);
-			break;
-
-		case MDL_ESS:
-			ess_mixer_init (devc);
-			break;
-
-		case MDL_SMW:
-			devc->mixer_caps = SOUND_CAP_EXCL_INPUT;
-			devc->supported_devices = 0;
-			devc->supported_rec_devices = 0;
-			devc->iomap = &sbpro_mix;
-			devc->iomap_sz = ARRAY_SIZE(sbpro_mix);
-			smw_mixer_init(devc);
-			break;
-
-		case MDL_SB16:
-			devc->mixer_caps = 0;
-			devc->supported_rec_devices = SB16_RECORDING_DEVICES;
-			devc->supported_out_devices = SB16_OUTFILTER_DEVICES;
-			if (devc->submodel != SUBMDL_ALS007)
-			{
-				devc->supported_devices = SB16_MIXER_DEVICES;
-				devc->iomap = &sb16_mix;
-				devc->iomap_sz = ARRAY_SIZE(sb16_mix);
-			}
-			else
-			{
-				devc->supported_devices = ALS007_MIXER_DEVICES;
-				devc->iomap = &als007_mix;
-				devc->iomap_sz = ARRAY_SIZE(als007_mix);
-			}
-			break;
-
-		default:
-			printk(KERN_WARNING "sb_mixer: Unsupported mixer type %d\n", devc->model);
-			return 0;
-	}
-
-	m = sound_alloc_mixerdev();
-	if (m == -1)
-		return 0;
-
-	mixer_devs[m] = kmalloc(sizeof(struct mixer_operations), GFP_KERNEL);
-	if (mixer_devs[m] == NULL)
-	{
-		printk(KERN_ERR "sb_mixer: Can't allocate memory\n");
-		sound_unload_mixerdev(m);
-		return 0;
-	}
-
-	if (devc->submodel != SUBMDL_ALS007)
-		memcpy ((char *) mixer_devs[m], (char *) &sb_mixer_operations, sizeof (struct mixer_operations));
-	else
-		memcpy ((char *) mixer_devs[m], (char *) &als007_mixer_operations, sizeof (struct mixer_operations));
-
-	mixer_devs[m]->devc = devc;
-
-	if (owner)
-			 mixer_devs[m]->owner = owner;
-	
-	devc->my_mixerdev = m;
-	sb_mixer_reset(devc);
-	return 1;
-}
-
-void sb_mixer_unload(sb_devc *devc)
-{
-	if (devc->my_mixerdev == -1)
-		return;
-
-	kfree(mixer_devs[devc->my_mixerdev]);
-	sound_unload_mixerdev(devc->my_mixerdev);
-	sbmixnum--;
-}
diff --git a/sound/oss/sb_mixer.h b/sound/oss/sb_mixer.h
deleted file mode 100644
index 4b9425f085e3..000000000000
--- a/sound/oss/sb_mixer.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * sound/oss/sb_mixer.h
- * 
- * Definitions for the SB Pro and SB16 mixers
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-/*
- * Modified:
- *	Hunyue Yau	Jan 6 1994
- *	Added defines for the Sound Galaxy NX Pro mixer.
- *
- *	Rolf Fokkens	Dec 20 1998
- *	Added defines for some ES188x chips.
- *
- *	Rolf Fokkens	Dec 27 1998
- *	Moved static stuff to sb_mixer.c
- *
- */
-/*
- * Mixer registers
- * 
- * NOTE!	RECORD_SRC == IN_FILTER
- */
-
-/* 
- * Mixer registers of SB Pro
- */
-#define VOC_VOL		0x04
-#define MIC_VOL		0x0A
-#define MIC_MIX		0x0A
-#define RECORD_SRC	0x0C
-#define IN_FILTER	0x0C
-#define OUT_FILTER	0x0E
-#define MASTER_VOL	0x22
-#define FM_VOL		0x26
-#define CD_VOL		0x28
-#define LINE_VOL	0x2E
-#define IRQ_NR		0x80
-#define DMA_NR		0x81
-#define IRQ_STAT	0x82
-#define OPSW		0x3c
-
-/*
- * Additional registers on the SG NX Pro 
- */
-#define COVOX_VOL	0x42
-#define TREBLE_LVL	0x44
-#define BASS_LVL	0x46
-
-#define FREQ_HI         (1 << 3)/* Use High-frequency ANFI filters */
-#define FREQ_LOW        0	/* Use Low-frequency ANFI filters */
-#define FILT_ON         0	/* Yes, 0 to turn it on, 1 for off */
-#define FILT_OFF        (1 << 5)
-
-#define MONO_DAC	0x00
-#define STEREO_DAC	0x02
-
-/*
- * Mixer registers of SB16
- */
-#define SB16_OMASK	0x3c
-#define SB16_IMASK_L	0x3d
-#define SB16_IMASK_R	0x3e
-
-#define LEFT_CHN	0
-#define RIGHT_CHN	1
-
-/*
- * 3DSE register of AWE32/64
- */
-#define AWE_3DSE	0x90
-
-/*
- * Mixer registers of ALS007
- */
-#define ALS007_RECORD_SRC	0x6c
-#define ALS007_OUTPUT_CTRL1	0x3c
-#define ALS007_OUTPUT_CTRL2	0x4c
-
-#define MIX_ENT(name, reg_l, bit_l, len_l, reg_r, bit_r, len_r)	\
-	{{reg_l, bit_l, len_l}, {reg_r, bit_r, len_r}}
-
-/*
- *	Recording sources (SB Pro)
- */
-
-#define SRC__MIC         1	/* Select Microphone recording source */
-#define SRC__CD          3	/* Select CD recording source */
-#define SRC__LINE        7	/* Use Line-in for recording source */
-
-/*
- *	Recording sources for ALS-007
- */
-
-#define ALS007_MIC	4
-#define ALS007_LINE	6
-#define ALS007_CD	2
-#define ALS007_SYNTH	7
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
deleted file mode 100644
index f19da4b47c1d..000000000000
--- a/sound/oss/sequencer.c
+++ /dev/null
@@ -1,1661 +0,0 @@
-/*
- * sound/oss/sequencer.c
- *
- * The sequencer personality manager.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Alan Cox	   : reformatted and fixed a pair of null pointer bugs
- */
-#include <linux/kmod.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "midi_ctrl.h"
-#include "sleep.h"
-
-static int      sequencer_ok;
-static struct sound_timer_operations *tmr;
-static int      tmr_no = -1;	/* Currently selected timer */
-static int      pending_timer = -1;	/* For timer change operation */
-extern unsigned long seq_time;
-
-static int      obsolete_api_used;
-static DEFINE_SPINLOCK(lock);
-
-/*
- * Local counts for number of synth and MIDI devices. These are initialized
- * by the sequencer_open.
- */
-static int      max_mididev;
-static int      max_synthdev;
-
-/*
- * The seq_mode gives the operating mode of the sequencer:
- *      1 = level1 (the default)
- *      2 = level2 (extended capabilities)
- */
-
-#define SEQ_1	1
-#define SEQ_2	2
-static int      seq_mode = SEQ_1;
-
-static DECLARE_WAIT_QUEUE_HEAD(seq_sleeper);
-static DECLARE_WAIT_QUEUE_HEAD(midi_sleeper);
-
-static int      midi_opened[MAX_MIDI_DEV];
-
-static int      midi_written[MAX_MIDI_DEV];
-
-static unsigned long prev_input_time;
-static int      prev_event_time;
-
-#include "tuning.h"
-
-#define EV_SZ	8
-#define IEV_SZ	8
-
-static unsigned char *queue;
-static unsigned char *iqueue;
-
-static volatile int qhead, qtail, qlen;
-static volatile int iqhead, iqtail, iqlen;
-static volatile int seq_playing;
-static volatile int sequencer_busy;
-static int      output_threshold;
-static long     pre_event_timeout;
-static unsigned synth_open_mask;
-
-static int      seq_queue(unsigned char *note, char nonblock);
-static void     seq_startplay(void);
-static int      seq_sync(void);
-static void     seq_reset(void);
-
-#if MAX_SYNTH_DEV > 15
-#error Too many synthesizer devices enabled.
-#endif
-
-int sequencer_read(int dev, struct file *file, char __user *buf, int count)
-{
-	int c = count, p = 0;
-	int ev_len;
-	unsigned long flags;
-
-	dev = dev >> 4;
-
-	ev_len = seq_mode == SEQ_1 ? 4 : 8;
-
-	spin_lock_irqsave(&lock,flags);
-
-	if (!iqlen)
-	{
-		spin_unlock_irqrestore(&lock,flags);
- 		if (file->f_flags & O_NONBLOCK) {
-  			return -EAGAIN;
-  		}
-
-		oss_broken_sleep_on(&midi_sleeper, pre_event_timeout);
-		spin_lock_irqsave(&lock,flags);
-		if (!iqlen)
-		{
-			spin_unlock_irqrestore(&lock,flags);
-			return 0;
-		}
-	}
-	while (iqlen && c >= ev_len)
-	{
-		char *fixit = (char *) &iqueue[iqhead * IEV_SZ];
-		spin_unlock_irqrestore(&lock,flags);
-		if (copy_to_user(&(buf)[p], fixit, ev_len))
-			return count - c;
-		p += ev_len;
-		c -= ev_len;
-
-		spin_lock_irqsave(&lock,flags);
-		iqhead = (iqhead + 1) % SEQ_MAX_QUEUE;
-		iqlen--;
-	}
-	spin_unlock_irqrestore(&lock,flags);
-	return count - c;
-}
-
-static void sequencer_midi_output(int dev)
-{
-	/*
-	 * Currently NOP
-	 */
-}
-
-void seq_copy_to_input(unsigned char *event_rec, int len)
-{
-	unsigned long flags;
-
-	/*
-	 * Verify that the len is valid for the current mode.
-	 */
-
-	if (len != 4 && len != 8)
-		return;
-	if ((seq_mode == SEQ_1) != (len == 4))
-		return;
-
-	if (iqlen >= (SEQ_MAX_QUEUE - 1))
-		return;		/* Overflow */
-
-	spin_lock_irqsave(&lock,flags);
-	memcpy(&iqueue[iqtail * IEV_SZ], event_rec, len);
-	iqlen++;
-	iqtail = (iqtail + 1) % SEQ_MAX_QUEUE;
-	wake_up(&midi_sleeper);
-	spin_unlock_irqrestore(&lock,flags);
-}
-EXPORT_SYMBOL(seq_copy_to_input);
-
-static void sequencer_midi_input(int dev, unsigned char data)
-{
-	unsigned int tstamp;
-	unsigned char event_rec[4];
-
-	if (data == 0xfe)	/* Ignore active sensing */
-		return;
-
-	tstamp = jiffies - seq_time;
-
-	if (tstamp != prev_input_time)
-	{
-		tstamp = (tstamp << 8) | SEQ_WAIT;
-		seq_copy_to_input((unsigned char *) &tstamp, 4);
-		prev_input_time = tstamp;
-	}
-	event_rec[0] = SEQ_MIDIPUTC;
-	event_rec[1] = data;
-	event_rec[2] = dev;
-	event_rec[3] = 0;
-
-	seq_copy_to_input(event_rec, 4);
-}
-
-void seq_input_event(unsigned char *event_rec, int len)
-{
-	unsigned long this_time;
-
-	if (seq_mode == SEQ_2)
-		this_time = tmr->get_time(tmr_no);
-	else
-		this_time = jiffies - seq_time;
-
-	if (this_time != prev_input_time)
-	{
-		unsigned char   tmp_event[8];
-
-		tmp_event[0] = EV_TIMING;
-		tmp_event[1] = TMR_WAIT_ABS;
-		tmp_event[2] = 0;
-		tmp_event[3] = 0;
-		*(unsigned int *) &tmp_event[4] = this_time;
-
-		seq_copy_to_input(tmp_event, 8);
-		prev_input_time = this_time;
-	}
-	seq_copy_to_input(event_rec, len);
-}
-EXPORT_SYMBOL(seq_input_event);
-
-int sequencer_write(int dev, struct file *file, const char __user *buf, int count)
-{
-	unsigned char event_rec[EV_SZ], ev_code;
-	int p = 0, c, ev_size;
-	int mode = translate_mode(file);
-
-	dev = dev >> 4;
-
-	if (mode == OPEN_READ)
-		return -EIO;
-
-	c = count;
-
-	while (c >= 4)
-	{
-		if (copy_from_user((char *) event_rec, &(buf)[p], 4))
-			goto out;
-		ev_code = event_rec[0];
-
-		if (ev_code == SEQ_FULLSIZE)
-		{
-			int err, fmt;
-
-			dev = *(unsigned short *) &event_rec[2];
-			if (dev < 0 || dev >= max_synthdev || synth_devs[dev] == NULL)
-				return -ENXIO;
-
-			if (!(synth_open_mask & (1 << dev)))
-				return -ENXIO;
-
-			fmt = (*(short *) &event_rec[0]) & 0xffff;
-			err = synth_devs[dev]->load_patch(dev, fmt, buf + p, c, 0);
-			if (err < 0)
-				return err;
-
-			return err;
-		}
-		if (ev_code >= 128)
-		{
-			if (seq_mode == SEQ_2 && ev_code == SEQ_EXTENDED)
-			{
-				printk(KERN_WARNING "Sequencer: Invalid level 2 event %x\n", ev_code);
-				return -EINVAL;
-			}
-			ev_size = 8;
-
-			if (c < ev_size)
-			{
-				if (!seq_playing)
-					seq_startplay();
-				return count - c;
-			}
-			if (copy_from_user((char *)&event_rec[4],
-					   &(buf)[p + 4], 4))
-				goto out;
-
-		}
-		else
-		{
-			if (seq_mode == SEQ_2)
-			{
-				printk(KERN_WARNING "Sequencer: 4 byte event in level 2 mode\n");
-				return -EINVAL;
-			}
-			ev_size = 4;
-
-			if (event_rec[0] != SEQ_MIDIPUTC)
-				obsolete_api_used = 1;
-		}
-
-		if (event_rec[0] == SEQ_MIDIPUTC)
-		{
-			if (!midi_opened[event_rec[2]])
-			{
-				int err, mode;
-				int dev = event_rec[2];
-
-				if (dev >= max_mididev || midi_devs[dev]==NULL)
-				{
-					/*printk("Sequencer Error: Nonexistent MIDI device %d\n", dev);*/
-					return -ENXIO;
-				}
-				mode = translate_mode(file);
-
-				if ((err = midi_devs[dev]->open(dev, mode,
-								sequencer_midi_input, sequencer_midi_output)) < 0)
-				{
-					seq_reset();
-					printk(KERN_WARNING "Sequencer Error: Unable to open Midi #%d\n", dev);
-					return err;
-				}
-				midi_opened[dev] = 1;
-			}
-		}
-		if (!seq_queue(event_rec, (file->f_flags & (O_NONBLOCK) ? 1 : 0)))
-		{
-			int processed = count - c;
-
-			if (!seq_playing)
-				seq_startplay();
-
-			if (!processed && (file->f_flags & O_NONBLOCK))
-				return -EAGAIN;
-			else
-				return processed;
-		}
-		p += ev_size;
-		c -= ev_size;
-	}
-
-	if (!seq_playing)
-		seq_startplay();
-out:
-	return count;
-}
-
-static int seq_queue(unsigned char *note, char nonblock)
-{
-
-	/*
-	 * Test if there is space in the queue
-	 */
-
-	if (qlen >= SEQ_MAX_QUEUE)
-		if (!seq_playing)
-			seq_startplay();	/*
-						 * Give chance to drain the queue
-						 */
-
-	if (!nonblock && qlen >= SEQ_MAX_QUEUE && !waitqueue_active(&seq_sleeper)) {
-		/*
-		 * Sleep until there is enough space on the queue
-		 */
-		oss_broken_sleep_on(&seq_sleeper, MAX_SCHEDULE_TIMEOUT);
-	}
-	if (qlen >= SEQ_MAX_QUEUE)
-	{
-		return 0;	/*
-				 * To be sure
-				 */
-	}
-	memcpy(&queue[qtail * EV_SZ], note, EV_SZ);
-
-	qtail = (qtail + 1) % SEQ_MAX_QUEUE;
-	qlen++;
-
-	return 1;
-}
-
-static int extended_event(unsigned char *q)
-{
-	int dev = q[2];
-
-	if (dev < 0 || dev >= max_synthdev)
-		return -ENXIO;
-
-	if (!(synth_open_mask & (1 << dev)))
-		return -ENXIO;
-
-	switch (q[1])
-	{
-		case SEQ_NOTEOFF:
-			synth_devs[dev]->kill_note(dev, q[3], q[4], q[5]);
-			break;
-
-		case SEQ_NOTEON:
-			if (q[4] > 127 && q[4] != 255)
-				return 0;
-
-			if (q[5] == 0)
-			{
-				synth_devs[dev]->kill_note(dev, q[3], q[4], q[5]);
-				break;
-			}
-			synth_devs[dev]->start_note(dev, q[3], q[4], q[5]);
-			break;
-
-		case SEQ_PGMCHANGE:
-			synth_devs[dev]->set_instr(dev, q[3], q[4]);
-			break;
-
-		case SEQ_AFTERTOUCH:
-			synth_devs[dev]->aftertouch(dev, q[3], q[4]);
-			break;
-
-		case SEQ_BALANCE:
-			synth_devs[dev]->panning(dev, q[3], (char) q[4]);
-			break;
-
-		case SEQ_CONTROLLER:
-			synth_devs[dev]->controller(dev, q[3], q[4], (short) (q[5] | (q[6] << 8)));
-			break;
-
-		case SEQ_VOLMODE:
-			if (synth_devs[dev]->volume_method != NULL)
-				synth_devs[dev]->volume_method(dev, q[3]);
-			break;
-
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int find_voice(int dev, int chn, int note)
-{
-	unsigned short key;
-	int i;
-
-	key = (chn << 8) | (note + 1);
-	for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++)
-		if (synth_devs[dev]->alloc.map[i] == key)
-			return i;
-	return -1;
-}
-
-static int alloc_voice(int dev, int chn, int note)
-{
-	unsigned short  key;
-	int voice;
-
-	key = (chn << 8) | (note + 1);
-
-	voice = synth_devs[dev]->alloc_voice(dev, chn, note,
-					     &synth_devs[dev]->alloc);
-	synth_devs[dev]->alloc.map[voice] = key;
-	synth_devs[dev]->alloc.alloc_times[voice] =
-			synth_devs[dev]->alloc.timestamp++;
-	return voice;
-}
-
-static void seq_chn_voice_event(unsigned char *event_rec)
-{
-#define dev event_rec[1]
-#define cmd event_rec[2]
-#define chn event_rec[3]
-#define note event_rec[4]
-#define parm event_rec[5]
-
-	int voice = -1;
-
-	if ((int) dev > max_synthdev || synth_devs[dev] == NULL)
-		return;
-	if (!(synth_open_mask & (1 << dev)))
-		return;
-	if (!synth_devs[dev])
-		return;
-
-	if (seq_mode == SEQ_2)
-	{
-		if (synth_devs[dev]->alloc_voice)
-			voice = find_voice(dev, chn, note);
-
-		if (cmd == MIDI_NOTEON && parm == 0)
-		{
-			cmd = MIDI_NOTEOFF;
-			parm = 64;
-		}
-	}
-
-	switch (cmd)
-	{
-		case MIDI_NOTEON:
-			if (note > 127 && note != 255)	/* Not a seq2 feature */
-				return;
-
-			if (voice == -1 && seq_mode == SEQ_2 && synth_devs[dev]->alloc_voice)
-			{
-				/* Internal synthesizer (FM, GUS, etc) */
-				voice = alloc_voice(dev, chn, note);
-			}
-			if (voice == -1)
-				voice = chn;
-
-			if (seq_mode == SEQ_2 && (int) dev < num_synths)
-			{
-				/*
-				 * The MIDI channel 10 is a percussive channel. Use the note
-				 * number to select the proper patch (128 to 255) to play.
-				 */
-
-				if (chn == 9)
-				{
-					synth_devs[dev]->set_instr(dev, voice, 128 + note);
-					synth_devs[dev]->chn_info[chn].pgm_num = 128 + note;
-				}
-				synth_devs[dev]->setup_voice(dev, voice, chn);
-			}
-			synth_devs[dev]->start_note(dev, voice, note, parm);
-			break;
-
-		case MIDI_NOTEOFF:
-			if (voice == -1)
-				voice = chn;
-			synth_devs[dev]->kill_note(dev, voice, note, parm);
-			break;
-
-		case MIDI_KEY_PRESSURE:
-			if (voice == -1)
-				voice = chn;
-			synth_devs[dev]->aftertouch(dev, voice, parm);
-			break;
-
-		default:;
-	}
-#undef dev
-#undef cmd
-#undef chn
-#undef note
-#undef parm
-}
-
-
-static void seq_chn_common_event(unsigned char *event_rec)
-{
-	unsigned char dev = event_rec[1];
-	unsigned char cmd = event_rec[2];
-	unsigned char chn = event_rec[3];
-	unsigned char p1 = event_rec[4];
-
-	/* unsigned char p2 = event_rec[5]; */
-	unsigned short w14 = *(short *) &event_rec[6];
-
-	if ((int) dev > max_synthdev || synth_devs[dev] == NULL)
-		return;
-	if (!(synth_open_mask & (1 << dev)))
-		return;
-	if (!synth_devs[dev])
-		return;
-
-	switch (cmd)
-	{
-		case MIDI_PGM_CHANGE:
-			if (seq_mode == SEQ_2)
-			{
-				if (chn > 15)
-					break;
-
-				synth_devs[dev]->chn_info[chn].pgm_num = p1;
-				if ((int) dev >= num_synths)
-					synth_devs[dev]->set_instr(dev, chn, p1);
-			}
-			else
-				synth_devs[dev]->set_instr(dev, chn, p1);
-
-			break;
-
-		case MIDI_CTL_CHANGE:
-			if (seq_mode == SEQ_2)
-			{
-				if (chn > 15 || p1 > 127)
-					break;
-
-				synth_devs[dev]->chn_info[chn].controllers[p1] = w14 & 0x7f;
-
-				if (p1 < 32)	/* Setting MSB should clear LSB to 0 */
-					synth_devs[dev]->chn_info[chn].controllers[p1 + 32] = 0;
-
-				if ((int) dev < num_synths)
-				{
-					int val = w14 & 0x7f;
-					int i, key;
-
-					if (p1 < 64)	/* Combine MSB and LSB */
-					{
-						val = ((synth_devs[dev]->
-							chn_info[chn].controllers[p1 & ~32] & 0x7f) << 7)
-							| (synth_devs[dev]->
-							chn_info[chn].controllers[p1 | 32] & 0x7f);
-						p1 &= ~32;
-					}
-					/* Handle all playing notes on this channel */
-
-					key = ((int) chn << 8);
-
-					for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++)
-						if ((synth_devs[dev]->alloc.map[i] & 0xff00) == key)
-							synth_devs[dev]->controller(dev, i, p1, val);
-				}
-				else
-					synth_devs[dev]->controller(dev, chn, p1, w14);
-			}
-			else	/* Mode 1 */
-				synth_devs[dev]->controller(dev, chn, p1, w14);
-			break;
-
-		case MIDI_PITCH_BEND:
-			if (seq_mode == SEQ_2)
-			{
-				if (chn > 15)
-					break;
-
-				synth_devs[dev]->chn_info[chn].bender_value = w14;
-
-				if ((int) dev < num_synths)
-				{
-					/* Handle all playing notes on this channel */
-					int i, key;
-
-					key = (chn << 8);
-
-					for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++)
-						if ((synth_devs[dev]->alloc.map[i] & 0xff00) == key)
-							synth_devs[dev]->bender(dev, i, w14);
-				}
-				else
-					synth_devs[dev]->bender(dev, chn, w14);
-			}
-			else	/* MODE 1 */
-				synth_devs[dev]->bender(dev, chn, w14);
-			break;
-
-		default:;
-	}
-}
-
-static int seq_timing_event(unsigned char *event_rec)
-{
-	unsigned char cmd = event_rec[1];
-	unsigned int parm = *(int *) &event_rec[4];
-
-	if (seq_mode == SEQ_2)
-	{
-		int ret;
-
-		if ((ret = tmr->event(tmr_no, event_rec)) == TIMER_ARMED)
-			if ((SEQ_MAX_QUEUE - qlen) >= output_threshold)
-				wake_up(&seq_sleeper);
-		return ret;
-	}
-	switch (cmd)
-	{
-		case TMR_WAIT_REL:
-			parm += prev_event_time;
-
-			/*
-			 * NOTE!  No break here. Execution of TMR_WAIT_REL continues in the
-			 * next case (TMR_WAIT_ABS)
-			 */
-
-		case TMR_WAIT_ABS:
-			if (parm > 0)
-			{
-				long time;
-
-				time = parm;
-				prev_event_time = time;
-
-				seq_playing = 1;
-				request_sound_timer(time);
-
-				if ((SEQ_MAX_QUEUE - qlen) >= output_threshold)
-					wake_up(&seq_sleeper);
-				return TIMER_ARMED;
-			}
-			break;
-
-		case TMR_START:
-			seq_time = jiffies;
-			prev_input_time = 0;
-			prev_event_time = 0;
-			break;
-
-		case TMR_STOP:
-			break;
-
-		case TMR_CONTINUE:
-			break;
-
-		case TMR_TEMPO:
-			break;
-
-		case TMR_ECHO:
-			parm = (parm << 8 | SEQ_ECHO);
-			seq_copy_to_input((unsigned char *) &parm, 4);
-			break;
-
-		default:;
-	}
-
-	return TIMER_NOT_ARMED;
-}
-
-static void seq_local_event(unsigned char *event_rec)
-{
-	unsigned char   cmd = event_rec[1];
-	unsigned int    parm = *((unsigned int *) &event_rec[4]);
-
-	switch (cmd)
-	{
-		case LOCL_STARTAUDIO:
-			DMAbuf_start_devices(parm);
-			break;
-
-		default:;
-	}
-}
-
-static void seq_sysex_message(unsigned char *event_rec)
-{
-	unsigned int dev = event_rec[1];
-	int i, l = 0;
-	unsigned char  *buf = &event_rec[2];
-
-	if (dev > max_synthdev)
-		return;
-	if (!(synth_open_mask & (1 << dev)))
-		return;
-	if (!synth_devs[dev])
-		return;
-
-	l = 0;
-	for (i = 0; i < 6 && buf[i] != 0xff; i++)
-		l = i + 1;
-
-	if (!synth_devs[dev]->send_sysex)
-		return;
-	if (l > 0)
-		synth_devs[dev]->send_sysex(dev, buf, l);
-}
-
-static int play_event(unsigned char *q)
-{
-	/*
-	 * NOTE! This routine returns
-	 *   0 = normal event played.
-	 *   1 = Timer armed. Suspend playback until timer callback.
-	 *   2 = MIDI output buffer full. Restore queue and suspend until timer
-	 */
-	unsigned int *delay;
-
-	switch (q[0])
-	{
-		case SEQ_NOTEOFF:
-			if (synth_open_mask & (1 << 0))
-				if (synth_devs[0])
-					synth_devs[0]->kill_note(0, q[1], 255, q[3]);
-			break;
-
-		case SEQ_NOTEON:
-			if (q[4] < 128 || q[4] == 255)
-				if (synth_open_mask & (1 << 0))
-					if (synth_devs[0])
-						synth_devs[0]->start_note(0, q[1], q[2], q[3]);
-			break;
-
-		case SEQ_WAIT:
-			delay = (unsigned int *) q;	/*
-							 * Bytes 1 to 3 are containing the *
-							 * delay in 'ticks'
-							 */
-			*delay = (*delay >> 8) & 0xffffff;
-
-			if (*delay > 0)
-			{
-				long time;
-
-				seq_playing = 1;
-				time = *delay;
-				prev_event_time = time;
-
-				request_sound_timer(time);
-
-				if ((SEQ_MAX_QUEUE - qlen) >= output_threshold)
-					wake_up(&seq_sleeper);
-				/*
-				 * The timer is now active and will reinvoke this function
-				 * after the timer expires. Return to the caller now.
-				 */
-				return 1;
-			}
-			break;
-
-		case SEQ_PGMCHANGE:
-			if (synth_open_mask & (1 << 0))
-				if (synth_devs[0])
-					synth_devs[0]->set_instr(0, q[1], q[2]);
-			break;
-
-		case SEQ_SYNCTIMER: 	/*
-					 * Reset timer
-					 */
-			seq_time = jiffies;
-			prev_input_time = 0;
-			prev_event_time = 0;
-			break;
-
-		case SEQ_MIDIPUTC:	/*
-					 * Put a midi character
-					 */
-			if (midi_opened[q[2]])
-			{
-				int dev;
-
-				dev = q[2];
-
-				if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
-					break;
-
-				if (!midi_devs[dev]->outputc(dev, q[1]))
-				{
-					/*
-					 * Output FIFO is full. Wait one timer cycle and try again.
-					 */
-
-					seq_playing = 1;
-					request_sound_timer(-1);
-					return 2;
-				}
-				else
-					midi_written[dev] = 1;
-			}
-			break;
-
-		case SEQ_ECHO:
-			seq_copy_to_input(q, 4);	/*
-							 * Echo back to the process
-							 */
-			break;
-
-		case SEQ_PRIVATE:
-			if ((int) q[1] < max_synthdev)
-				synth_devs[q[1]]->hw_control(q[1], q);
-			break;
-
-		case SEQ_EXTENDED:
-			extended_event(q);
-			break;
-
-		case EV_CHN_VOICE:
-			seq_chn_voice_event(q);
-			break;
-
-		case EV_CHN_COMMON:
-			seq_chn_common_event(q);
-			break;
-
-		case EV_TIMING:
-			if (seq_timing_event(q) == TIMER_ARMED)
-			{
-				return 1;
-			}
-			break;
-
-		case EV_SEQ_LOCAL:
-			seq_local_event(q);
-			break;
-
-		case EV_SYSEX:
-			seq_sysex_message(q);
-			break;
-
-		default:;
-	}
-	return 0;
-}
-
-/* called also as timer in irq context */
-static void seq_startplay(void)
-{
-	int this_one, action;
-	unsigned long flags;
-
-	while (qlen > 0)
-	{
-
-		spin_lock_irqsave(&lock,flags);
-		qhead = ((this_one = qhead) + 1) % SEQ_MAX_QUEUE;
-		qlen--;
-		spin_unlock_irqrestore(&lock,flags);
-
-		seq_playing = 1;
-
-		if ((action = play_event(&queue[this_one * EV_SZ])))
-		{		/* Suspend playback. Next timer routine invokes this routine again */
-			if (action == 2)
-			{
-				qlen++;
-				qhead = this_one;
-			}
-			return;
-		}
-	}
-
-	seq_playing = 0;
-
-	if ((SEQ_MAX_QUEUE - qlen) >= output_threshold)
-		wake_up(&seq_sleeper);
-}
-
-static void reset_controllers(int dev, unsigned char *controller, int update_dev)
-{
-	int i;
-	for (i = 0; i < 128; i++)
-		controller[i] = ctrl_def_values[i];
-}
-
-static void setup_mode2(void)
-{
-	int dev;
-
-	max_synthdev = num_synths;
-
-	for (dev = 0; dev < num_midis; dev++)
-	{
-		if (midi_devs[dev] && midi_devs[dev]->converter != NULL)
-		{
-			synth_devs[max_synthdev++] = midi_devs[dev]->converter;
-		}
-	}
-
-	for (dev = 0; dev < max_synthdev; dev++)
-	{
-		int chn;
-
-		synth_devs[dev]->sysex_ptr = 0;
-		synth_devs[dev]->emulation = 0;
-
-		for (chn = 0; chn < 16; chn++)
-		{
-			synth_devs[dev]->chn_info[chn].pgm_num = 0;
-			reset_controllers(dev,
-				synth_devs[dev]->chn_info[chn].controllers,0);
-			synth_devs[dev]->chn_info[chn].bender_value = (1 << 7);	/* Neutral */
-			synth_devs[dev]->chn_info[chn].bender_range = 200;
-		}
-	}
-	max_mididev = 0;
-	seq_mode = SEQ_2;
-}
-
-int sequencer_open(int dev, struct file *file)
-{
-	int retval, mode, i;
-	int level, tmp;
-
-	if (!sequencer_ok)
-		sequencer_init();
-
-	level = ((dev & 0x0f) == SND_DEV_SEQ2) ? 2 : 1;
-
-	dev = dev >> 4;
-	mode = translate_mode(file);
-
-	if (!sequencer_ok)
-	{
-/*		printk("Sound card: sequencer not initialized\n");*/
-		return -ENXIO;
-	}
-	if (dev)		/* Patch manager device (obsolete) */
-		return -ENXIO;
-
-	if(synth_devs[dev] == NULL)
-		request_module("synth0");
-
-	if (mode == OPEN_READ)
-	{
-		if (!num_midis)
-		{
-			/*printk("Sequencer: No MIDI devices. Input not possible\n");*/
-			sequencer_busy = 0;
-			return -ENXIO;
-		}
-	}
-	if (sequencer_busy)
-	{
-		return -EBUSY;
-	}
-	sequencer_busy = 1;
-	obsolete_api_used = 0;
-
-	max_mididev = num_midis;
-	max_synthdev = num_synths;
-	pre_event_timeout = MAX_SCHEDULE_TIMEOUT;
-	seq_mode = SEQ_1;
-
-	if (pending_timer != -1)
-	{
-		tmr_no = pending_timer;
-		pending_timer = -1;
-	}
-	if (tmr_no == -1)	/* Not selected yet */
-	{
-		int i, best;
-
-		best = -1;
-		for (i = 0; i < num_sound_timers; i++)
-			if (sound_timer_devs[i] && sound_timer_devs[i]->priority > best)
-			{
-				tmr_no = i;
-				best = sound_timer_devs[i]->priority;
-			}
-		if (tmr_no == -1)	/* Should not be */
-			tmr_no = 0;
-	}
-	tmr = sound_timer_devs[tmr_no];
-
-	if (level == 2)
-	{
-		if (tmr == NULL)
-		{
-			/*printk("sequencer: No timer for level 2\n");*/
-			sequencer_busy = 0;
-			return -ENXIO;
-		}
-		setup_mode2();
-	}
-	if (!max_synthdev && !max_mididev)
-	{
-		sequencer_busy=0;
-		return -ENXIO;
-	}
-
-	synth_open_mask = 0;
-
-	for (i = 0; i < max_mididev; i++)
-	{
-		midi_opened[i] = 0;
-		midi_written[i] = 0;
-	}
-
-	for (i = 0; i < max_synthdev; i++)
-	{
-		if (synth_devs[i]==NULL)
-			continue;
-
-		if (!try_module_get(synth_devs[i]->owner))
-			continue;
-
-		if ((tmp = synth_devs[i]->open(i, mode)) < 0)
-		{
-			printk(KERN_WARNING "Sequencer: Warning! Cannot open synth device #%d (%d)\n", i, tmp);
-			if (synth_devs[i]->midi_dev)
-				printk(KERN_WARNING "(Maps to MIDI dev #%d)\n", synth_devs[i]->midi_dev);
-		}
-		else
-		{
-			synth_open_mask |= (1 << i);
-			if (synth_devs[i]->midi_dev)
-				midi_opened[synth_devs[i]->midi_dev] = 1;
-		}
-	}
-
-	seq_time = jiffies;
-
-	prev_input_time = 0;
-	prev_event_time = 0;
-
-	if (seq_mode == SEQ_1 && (mode == OPEN_READ || mode == OPEN_READWRITE))
-	{
-		/*
-		 * Initialize midi input devices
-		 */
-
-		for (i = 0; i < max_mididev; i++)
-			if (!midi_opened[i] && midi_devs[i])
-			{
-				if (!try_module_get(midi_devs[i]->owner))
-					continue;
-	
-				if ((retval = midi_devs[i]->open(i, mode,
-					sequencer_midi_input, sequencer_midi_output)) >= 0)
-				{
-					midi_opened[i] = 1;
-				}
-			}
-	}
-
-	if (seq_mode == SEQ_2) {
-		if (try_module_get(tmr->owner))
-			tmr->open(tmr_no, seq_mode);
-	}
-
- 	init_waitqueue_head(&seq_sleeper);
- 	init_waitqueue_head(&midi_sleeper);
-	output_threshold = SEQ_MAX_QUEUE / 2;
-
-	return 0;
-}
-
-static void seq_drain_midi_queues(void)
-{
-	int i, n;
-
-	/*
-	 * Give the Midi drivers time to drain their output queues
-	 */
-
-	n = 1;
-
-	while (!signal_pending(current) && n)
-	{
-		n = 0;
-
-		for (i = 0; i < max_mididev; i++)
-			if (midi_opened[i] && midi_written[i])
-				if (midi_devs[i]->buffer_status != NULL)
-					if (midi_devs[i]->buffer_status(i))
-						n++;
-
-		/*
-		 * Let's have a delay
-		 */
-
- 		if (n)
-			oss_broken_sleep_on(&seq_sleeper, HZ/10);
-	}
-}
-
-void sequencer_release(int dev, struct file *file)
-{
-	int i;
-	int mode = translate_mode(file);
-
-	dev = dev >> 4;
-
-	/*
-	 * Wait until the queue is empty (if we don't have nonblock)
-	 */
-
-	if (mode != OPEN_READ && !(file->f_flags & O_NONBLOCK))
-	{
-		while (!signal_pending(current) && qlen > 0)
-		{
-  			seq_sync();
-			oss_broken_sleep_on(&seq_sleeper, 3*HZ);
- 			/* Extra delay */
-		}
-	}
-
-	if (mode != OPEN_READ)
-		seq_drain_midi_queues();	/*
-						 * Ensure the output queues are empty
-						 */
-	seq_reset();
-	if (mode != OPEN_READ)
-		seq_drain_midi_queues();	/*
-						 * Flush the all notes off messages
-						 */
-
-	for (i = 0; i < max_synthdev; i++)
-	{
-		if (synth_open_mask & (1 << i))	/*
-						 * Actually opened
-						 */
-			if (synth_devs[i])
-			{
-				synth_devs[i]->close(i);
-
-				module_put(synth_devs[i]->owner);
-
-				if (synth_devs[i]->midi_dev)
-					midi_opened[synth_devs[i]->midi_dev] = 0;
-			}
-	}
-
-	for (i = 0; i < max_mididev; i++)
-	{
-		if (midi_opened[i]) {
-			midi_devs[i]->close(i);
-			module_put(midi_devs[i]->owner);
-		}
-	}
-
-	if (seq_mode == SEQ_2) {
-		tmr->close(tmr_no);
-		module_put(tmr->owner);
-	}
-
-	if (obsolete_api_used)
-		printk(KERN_WARNING "/dev/music: Obsolete (4 byte) API was used by %s\n", current->comm);
-	sequencer_busy = 0;
-}
-
-static int seq_sync(void)
-{
-	if (qlen && !seq_playing && !signal_pending(current))
-		seq_startplay();
-
- 	if (qlen > 0)
-		oss_broken_sleep_on(&seq_sleeper, HZ);
-	return qlen;
-}
-
-static void midi_outc(int dev, unsigned char data)
-{
-	/*
-	 * NOTE! Calls sleep(). Don't call this from interrupt.
-	 */
-
-	int n;
-	unsigned long flags;
-
-	/*
-	 * This routine sends one byte to the Midi channel.
-	 * If the output FIFO is full, it waits until there
-	 * is space in the queue
-	 */
-
-	n = 3 * HZ;		/* Timeout */
-
-	spin_lock_irqsave(&lock,flags);
- 	while (n && !midi_devs[dev]->outputc(dev, data)) {
-		oss_broken_sleep_on(&seq_sleeper, HZ/25);
-  		n--;
-  	}
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static void seq_reset(void)
-{
-	/*
-	 * NOTE! Calls sleep(). Don't call this from interrupt.
-	 */
-
-	int i;
-	int chn;
-	unsigned long flags;
-
-	sound_stop_timer();
-
-	seq_time = jiffies;
-	prev_input_time = 0;
-	prev_event_time = 0;
-
-	qlen = qhead = qtail = 0;
-	iqlen = iqhead = iqtail = 0;
-
-	for (i = 0; i < max_synthdev; i++)
-		if (synth_open_mask & (1 << i))
-			if (synth_devs[i])
-				synth_devs[i]->reset(i);
-
-	if (seq_mode == SEQ_2)
-	{
-		for (chn = 0; chn < 16; chn++)
-			for (i = 0; i < max_synthdev; i++)
-				if (synth_open_mask & (1 << i))
-					if (synth_devs[i])
-					{
-						synth_devs[i]->controller(i, chn, 123, 0);	/* All notes off */
-						synth_devs[i]->controller(i, chn, 121, 0);	/* Reset all ctl */
-						synth_devs[i]->bender(i, chn, 1 << 13);	/* Bender off */
-					}
-	}
-	else	/* seq_mode == SEQ_1 */
-	{
-		for (i = 0; i < max_mididev; i++)
-			if (midi_written[i])	/*
-						 * Midi used. Some notes may still be playing
-						 */
-			{
-				/*
-				 *      Sending just a ACTIVE SENSING message should be enough to stop all
-				 *      playing notes. Since there are devices not recognizing the
-				 *      active sensing, we have to send some all notes off messages also.
-				 */
-				midi_outc(i, 0xfe);
-
-				for (chn = 0; chn < 16; chn++)
-				{
-					midi_outc(i, (unsigned char) (0xb0 + (chn & 0x0f)));		/* control change */
-					midi_outc(i, 0x7b);	/* All notes off */
-					midi_outc(i, 0);	/* Dummy parameter */
-				}
-
-				midi_devs[i]->close(i);
-
-				midi_written[i] = 0;
-				midi_opened[i] = 0;
-			}
-	}
-
-	seq_playing = 0;
-
-	spin_lock_irqsave(&lock,flags);
-
-	if (waitqueue_active(&seq_sleeper)) {
-		/*      printk( "Sequencer Warning: Unexpected sleeping process - Waking up\n"); */
-		wake_up(&seq_sleeper);
-	}
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static void seq_panic(void)
-{
-	/*
-	 * This routine is called by the application in case the user
-	 * wants to reset the system to the default state.
-	 */
-
-	seq_reset();
-
-	/*
-	 * Since some of the devices don't recognize the active sensing and
-	 * all notes off messages, we have to shut all notes manually.
-	 *
-	 *      TO BE IMPLEMENTED LATER
-	 */
-
-	/*
-	 * Also return the controllers to their default states
-	 */
-}
-
-int sequencer_ioctl(int dev, struct file *file, unsigned int cmd, void __user *arg)
-{
-	int midi_dev, orig_dev, val, err;
-	int mode = translate_mode(file);
-	struct synth_info inf;
-	struct seq_event_rec event_rec;
-	int __user *p = arg;
-
-	orig_dev = dev = dev >> 4;
-
-	switch (cmd)
-	{
-		case SNDCTL_TMR_TIMEBASE:
-		case SNDCTL_TMR_TEMPO:
-		case SNDCTL_TMR_START:
-		case SNDCTL_TMR_STOP:
-		case SNDCTL_TMR_CONTINUE:
-		case SNDCTL_TMR_METRONOME:
-		case SNDCTL_TMR_SOURCE:
-			if (seq_mode != SEQ_2)
-				return -EINVAL;
-			return tmr->ioctl(tmr_no, cmd, arg);
-
-		case SNDCTL_TMR_SELECT:
-			if (seq_mode != SEQ_2)
-				return -EINVAL;
-			if (get_user(pending_timer, p))
-				return -EFAULT;
-			if (pending_timer < 0 || pending_timer >= num_sound_timers || sound_timer_devs[pending_timer] == NULL)
-			{
-				pending_timer = -1;
-				return -EINVAL;
-			}
-			val = pending_timer;
-			break;
-
-		case SNDCTL_SEQ_PANIC:
-			seq_panic();
-			return -EINVAL;
-
-		case SNDCTL_SEQ_SYNC:
-			if (mode == OPEN_READ)
-				return 0;
-			while (qlen > 0 && !signal_pending(current))
-				seq_sync();
-			return qlen ? -EINTR : 0;
-
-		case SNDCTL_SEQ_RESET:
-			seq_reset();
-			return 0;
-
-		case SNDCTL_SEQ_TESTMIDI:
-			if (__get_user(midi_dev, p))
-				return -EFAULT;
-			if (midi_dev < 0 || midi_dev >= max_mididev || !midi_devs[midi_dev])
-				return -ENXIO;
-
-			if (!midi_opened[midi_dev] &&
-				(err = midi_devs[midi_dev]->open(midi_dev, mode, sequencer_midi_input,
-						     sequencer_midi_output)) < 0)
-				return err;
-			midi_opened[midi_dev] = 1;
-			return 0;
-
-		case SNDCTL_SEQ_GETINCOUNT:
-			if (mode == OPEN_WRITE)
-				return 0;
-			val = iqlen;
-			break;
-
-		case SNDCTL_SEQ_GETOUTCOUNT:
-			if (mode == OPEN_READ)
-				return 0;
-			val = SEQ_MAX_QUEUE - qlen;
-			break;
-
-		case SNDCTL_SEQ_GETTIME:
-			if (seq_mode == SEQ_2)
-				return tmr->ioctl(tmr_no, cmd, arg);
-			val = jiffies - seq_time;
-			break;
-
-		case SNDCTL_SEQ_CTRLRATE:
-			/*
-			 * If *arg == 0, just return the current rate
-			 */
-			if (seq_mode == SEQ_2)
-				return tmr->ioctl(tmr_no, cmd, arg);
-
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val != 0)
-				return -EINVAL;
-			val = HZ;
-			break;
-
-		case SNDCTL_SEQ_RESETSAMPLES:
-		case SNDCTL_SYNTH_REMOVESAMPLE:
-		case SNDCTL_SYNTH_CONTROL:
-			if (get_user(dev, p))
-				return -EFAULT;
-			if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL)
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << dev)) && !orig_dev)
-				return -EBUSY;
-			return synth_devs[dev]->ioctl(dev, cmd, arg);
-
-		case SNDCTL_SEQ_NRSYNTHS:
-			val = max_synthdev;
-			break;
-
-		case SNDCTL_SEQ_NRMIDIS:
-			val = max_mididev;
-			break;
-
-		case SNDCTL_SYNTH_MEMAVL:
-			if (get_user(dev, p))
-				return -EFAULT;
-			if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL)
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << dev)) && !orig_dev)
-				return -EBUSY;
-			val = synth_devs[dev]->ioctl(dev, cmd, arg);
-			break;
-
-		case SNDCTL_FM_4OP_ENABLE:
-			if (get_user(dev, p))
-				return -EFAULT;
-			if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL)
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << dev)))
-				return -ENXIO;
-			synth_devs[dev]->ioctl(dev, cmd, arg);
-			return 0;
-
-		case SNDCTL_SYNTH_INFO:
-			if (get_user(dev, &((struct synth_info __user *)arg)->device))
-				return -EFAULT;
-			if (dev < 0 || dev >= max_synthdev)
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << dev)) && !orig_dev)
-				return -EBUSY;
-			return synth_devs[dev]->ioctl(dev, cmd, arg);
-
-		/* Like SYNTH_INFO but returns ID in the name field */
-		case SNDCTL_SYNTH_ID:
-			if (get_user(dev, &((struct synth_info __user *)arg)->device))
-				return -EFAULT;
-			if (dev < 0 || dev >= max_synthdev)
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << dev)) && !orig_dev)
-				return -EBUSY;
-			memcpy(&inf, synth_devs[dev]->info, sizeof(inf));
-			strlcpy(inf.name, synth_devs[dev]->id, sizeof(inf.name));
-			inf.device = dev;
-			return copy_to_user(arg, &inf, sizeof(inf))?-EFAULT:0;
-
-		case SNDCTL_SEQ_OUTOFBAND:
-			if (copy_from_user(&event_rec, arg, sizeof(event_rec)))
-				return -EFAULT;
-			play_event(event_rec.arr);
-			return 0;
-
-		case SNDCTL_MIDI_INFO:
-			if (get_user(dev, &((struct midi_info __user *)arg)->device))
-				return -EFAULT;
-			if (dev < 0 || dev >= max_mididev || !midi_devs[dev])
-				return -ENXIO;
-			midi_devs[dev]->info.device = dev;
-			return copy_to_user(arg, &midi_devs[dev]->info, sizeof(struct midi_info))?-EFAULT:0;
-
-		case SNDCTL_SEQ_THRESHOLD:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val < 1)
-				val = 1;
-			if (val >= SEQ_MAX_QUEUE)
-				val = SEQ_MAX_QUEUE - 1;
-			output_threshold = val;
-			return 0;
-
-		case SNDCTL_MIDI_PRETIME:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val < 0)
-				val = 0;
-			val = (HZ * val) / 10;
-			pre_event_timeout = val;
-			break;
-
-		default:
-			if (mode == OPEN_READ)
-				return -EIO;
-			if (!synth_devs[0])
-				return -ENXIO;
-			if (!(synth_open_mask & (1 << 0)))
-				return -ENXIO;
-			if (!synth_devs[0]->ioctl)
-				return -EINVAL;
-			return synth_devs[0]->ioctl(0, cmd, arg);
-	}
-	return put_user(val, p);
-}
-
-/* No kernel lock - we're using the global irq lock here */
-unsigned int sequencer_poll(int dev, struct file *file, poll_table * wait)
-{
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	dev = dev >> 4;
-
-	spin_lock_irqsave(&lock,flags);
-	/* input */
-	poll_wait(file, &midi_sleeper, wait);
-	if (iqlen)
-		mask |= POLLIN | POLLRDNORM;
-
-	/* output */
-	poll_wait(file, &seq_sleeper, wait);
-	if ((SEQ_MAX_QUEUE - qlen) >= output_threshold)
-		mask |= POLLOUT | POLLWRNORM;
-	spin_unlock_irqrestore(&lock,flags);
-	return mask;
-}
-
-
-void sequencer_timer(unsigned long dummy)
-{
-	seq_startplay();
-}
-EXPORT_SYMBOL(sequencer_timer);
-
-int note_to_freq(int note_num)
-{
-
-	/*
-	 * This routine converts a midi note to a frequency (multiplied by 1000)
-	 */
-
-	int note, octave, note_freq;
-	static int notes[] =
-	{
-		261632, 277189, 293671, 311132, 329632, 349232,
-		369998, 391998, 415306, 440000, 466162, 493880
-	};
-
-#define BASE_OCTAVE	5
-
-	octave = note_num / 12;
-	note = note_num % 12;
-
-	note_freq = notes[note];
-
-	if (octave < BASE_OCTAVE)
-		note_freq >>= (BASE_OCTAVE - octave);
-	else if (octave > BASE_OCTAVE)
-		note_freq <<= (octave - BASE_OCTAVE);
-
-	/*
-	 * note_freq >>= 1;
-	 */
-
-	return note_freq;
-}
-EXPORT_SYMBOL(note_to_freq);
-
-unsigned long compute_finetune(unsigned long base_freq, int bend, int range,
-		 int vibrato_cents)
-{
-	unsigned long amount;
-	int negative, semitones, cents, multiplier = 1;
-
-	if (!bend)
-		return base_freq;
-	if (!range)
-		return base_freq;
-
-	if (!base_freq)
-		return base_freq;
-
-	if (range >= 8192)
-		range = 8192;
-
-	bend = bend * range / 8192;	/* Convert to cents */
-	bend += vibrato_cents;
-
-	if (!bend)
-		return base_freq;
-
-	negative = bend < 0 ? 1 : 0;
-
-	if (bend < 0)
-		bend *= -1;
-	if (bend > range)
-		bend = range;
-
-	/*
-	   if (bend > 2399)
-	   bend = 2399;
-	 */
-	while (bend > 2399)
-	{
-		multiplier *= 4;
-		bend -= 2400;
-	}
-
-	semitones = bend / 100;
-	cents = bend % 100;
-
-	amount = (int) (semitone_tuning[semitones] * multiplier * cent_tuning[cents]) / 10000;
-
-	if (negative)
-		return (base_freq * 10000) / amount;	/* Bend down */
-	else
-		return (base_freq * amount) / 10000;	/* Bend up */
-}
-EXPORT_SYMBOL(compute_finetune);
-
-void sequencer_init(void)
-{
-	if (sequencer_ok)
-		return;
-	queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ);
-	if (queue == NULL)
-	{
-		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n");
-		return;
-	}
-	iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
-	if (iqueue == NULL)
-	{
-		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n");
-		vfree(queue);
-		return;
-	}
-	sequencer_ok = 1;
-}
-EXPORT_SYMBOL(sequencer_init);
-
-void sequencer_unload(void)
-{
-	vfree(queue);
-	vfree(iqueue);
-	queue = iqueue = NULL;
-}
diff --git a/sound/oss/sleep.h b/sound/oss/sleep.h
deleted file mode 100644
index a20fc925a5ce..000000000000
--- a/sound/oss/sleep.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/wait.h>
-
-/*
- * Do not use. This is a replacement for the old
- * "interruptible_sleep_on_timeout" function that has been
- * deprecated for ages. All users should instead try to use
- * wait_event_interruptible_timeout.
- */
-
-static inline long
-oss_broken_sleep_on(wait_queue_head_t *q, long timeout)
-{
-	DEFINE_WAIT(wait);
-	prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
-	timeout = schedule_timeout(timeout);
-	finish_wait(q, &wait);
-	return timeout;
-}
diff --git a/sound/oss/sound_calls.h b/sound/oss/sound_calls.h
deleted file mode 100644
index 87d8ad4a0340..000000000000
--- a/sound/oss/sound_calls.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *	DMA buffer calls
- */
-
-int DMAbuf_open(int dev, int mode);
-int DMAbuf_release(int dev, int mode);
-int DMAbuf_getwrbuffer(int dev, char **buf, int *size, int dontblock);
-int DMAbuf_getrdbuffer(int dev, char **buf, int *len, int dontblock);
-int DMAbuf_rmchars(int dev, int buff_no, int c);
-int DMAbuf_start_output(int dev, int buff_no, int l);
-int DMAbuf_move_wrpointer(int dev, int l);
-/* int DMAbuf_ioctl(int dev, unsigned int cmd, void __user *arg, int local); */
-void DMAbuf_init(int dev, int dma1, int dma2);
-void DMAbuf_deinit(int dev);
-int DMAbuf_start_dma (int dev, unsigned long physaddr, int count, int dma_mode);
-void DMAbuf_inputintr(int dev);
-void DMAbuf_outputintr(int dev, int underflow_flag);
-struct dma_buffparms;
-int DMAbuf_space_in_queue (int dev);
-int DMAbuf_activate_recording (int dev, struct dma_buffparms *dmap);
-int DMAbuf_get_buffer_pointer (int dev, struct dma_buffparms *dmap, int direction);
-void DMAbuf_launch_output(int dev, struct dma_buffparms *dmap);
-unsigned int DMAbuf_poll(struct file *file, int dev, poll_table *wait);
-void DMAbuf_start_devices(unsigned int devmask);
-void DMAbuf_reset (int dev);
-int DMAbuf_sync (int dev);
-
-/*
- *	System calls for /dev/dsp and /dev/audio (audio.c)
- */
-
-int audio_read (int dev, struct file *file, char __user *buf, int count);
-int audio_write (int dev, struct file *file, const char __user *buf, int count);
-int audio_open (int dev, struct file *file);
-void audio_release (int dev, struct file *file);
-int audio_ioctl (int dev, struct file *file,
-	   unsigned int cmd, void __user *arg);
-void audio_init_devices (void);
-void reorganize_buffers (int dev, struct dma_buffparms *dmap, int recording);
-
-/*
- *	System calls for the /dev/sequencer
- */
-
-int sequencer_read (int dev, struct file *file, char __user *buf, int count);
-int sequencer_write (int dev, struct file *file, const char __user *buf, int count);
-int sequencer_open (int dev, struct file *file);
-void sequencer_release (int dev, struct file *file);
-int sequencer_ioctl (int dev, struct file *file, unsigned int cmd, void __user *arg);
-unsigned int sequencer_poll(int dev, struct file *file, poll_table * wait);
-
-void sequencer_init (void);
-void sequencer_unload (void);
-void sequencer_timer(unsigned long dummy);
-int note_to_freq(int note_num);
-unsigned long compute_finetune(unsigned long base_freq, int bend, int range,
-			       int vibrato_bend);
-void seq_input_event(unsigned char *event, int len);
-void seq_copy_to_input (unsigned char *event, int len);
-
-/*
- *	System calls for the /dev/midi
- */
-
-int MIDIbuf_read (int dev, struct file *file, char __user *buf, int count);
-int MIDIbuf_write (int dev, struct file *file, const char __user *buf, int count);
-int MIDIbuf_open (int dev, struct file *file);
-void MIDIbuf_release (int dev, struct file *file);
-int MIDIbuf_ioctl (int dev, struct file *file, unsigned int cmd, void __user *arg);
-unsigned int MIDIbuf_poll(int dev, struct file *file, poll_table * wait);
-int MIDIbuf_avail(int dev);
-
-void MIDIbuf_bytes_received(int dev, unsigned char *buf, int count);
-
-
-/*	From soundcard.c	*/
-void request_sound_timer (int count);
-void sound_stop_timer(void);
-void conf_printf(char *name, struct address_info *hw_config);
-void conf_printf2(char *name, int base, int irq, int dma, int dma2);
-
-/*	From sound_timer.c */
-void sound_timer_interrupt(void);
-void sound_timer_syncinterval(unsigned int new_usecs);
-
-/*      From midi_synth.c       */
-void do_midi_msg (int synthno, unsigned char *msg, int mlen);
diff --git a/sound/oss/sound_config.h b/sound/oss/sound_config.h
deleted file mode 100644
index 5253b0a70437..000000000000
--- a/sound/oss/sound_config.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* sound_config.h
- *
- * A driver for sound cards, misc. configuration parameters.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-#ifndef  _SOUND_CONFIG_H_
-#define  _SOUND_CONFIG_H_
-
-#include <linux/fs.h>
-#include <linux/sound.h>
-#include <linux/sched/signal.h>
-
-#include "os.h"
-#include "soundvers.h"
-
-
-#ifndef SND_DEFAULT_ENABLE
-#define SND_DEFAULT_ENABLE	1
-#endif
-
-#ifndef MAX_REALTIME_FACTOR
-#define MAX_REALTIME_FACTOR	4
-#endif
-
-/*
- * Use always 64k buffer size. There is no reason to use shorter.
- */
-#undef DSP_BUFFSIZE
-#define DSP_BUFFSIZE		(64*1024)
-
-#ifndef DSP_BUFFCOUNT
-#define DSP_BUFFCOUNT		1	/* 1 is recommended. */
-#endif
-
-#define FM_MONO		0x388	/* This is the I/O address used by AdLib */
-
-#ifndef CONFIG_PAS_BASE
-#define CONFIG_PAS_BASE	0x388
-#endif
-
-/* SEQ_MAX_QUEUE is the maximum number of sequencer events buffered by the
-   driver. (There is no need to alter this) */
-#define SEQ_MAX_QUEUE	1024
-
-#define SBFM_MAXINSTR		(256)	/* Size of the FM Instrument bank */
-/* 128 instruments for general MIDI setup and 16 unassigned	 */
-
-#define SND_NDEVS	256	/* Number of supported devices */
-
-#define DSP_DEFAULT_SPEED	8000
-
-#define MAX_AUDIO_DEV	5
-#define MAX_MIXER_DEV	5
-#define MAX_SYNTH_DEV	5
-#define MAX_MIDI_DEV	6
-#define MAX_TIMER_DEV	4
-
-struct address_info {
-	int io_base;
-	int irq;
-	int dma;
-	int dma2;
-	int always_detect;	/* 1=Trust me, it's there */
-	char *name;
-	int driver_use_1;	/* Driver defined field 1 */
-	int driver_use_2;	/* Driver defined field 2 */
-	int *osp;	/* OS specific info */
-	int card_subtype;	/* Driver specific. Usually 0 */
-	void *memptr;           /* Module memory chainer */
-	int slots[6];           /* To remember driver slot ids */
-};
-
-#define SYNTH_MAX_VOICES	32
-
-struct voice_alloc_info {
-		int max_voice;
-		int used_voices;
-		int ptr;		/* For device specific use */
-		unsigned short map[SYNTH_MAX_VOICES]; /* (ch << 8) | (note+1) */
-		int timestamp;
-		int alloc_times[SYNTH_MAX_VOICES];
-	};
-
-struct channel_info {
-		int pgm_num;
-		int bender_value;
-		int bender_range;
-		unsigned char controllers[128];
-	};
-
-/*
- * Process wakeup reasons
- */
-#define WK_NONE		0x00
-#define WK_WAKEUP	0x01
-#define WK_TIMEOUT	0x02
-#define WK_SIGNAL	0x04
-#define WK_SLEEP	0x08
-#define WK_SELECT	0x10
-#define WK_ABORT	0x20
-
-#define OPEN_READ	PCM_ENABLE_INPUT
-#define OPEN_WRITE	PCM_ENABLE_OUTPUT
-#define OPEN_READWRITE	(OPEN_READ|OPEN_WRITE)
-
-static inline int translate_mode(struct file *file)
-{
-	if (OPEN_READ == (__force int)FMODE_READ &&
-	    OPEN_WRITE == (__force int)FMODE_WRITE)
-		return (__force int)(file->f_mode & (FMODE_READ | FMODE_WRITE));
-	else
-		return ((file->f_mode & FMODE_READ) ? OPEN_READ : 0) |
-			((file->f_mode & FMODE_WRITE) ? OPEN_WRITE : 0);
-}
-
-#include "sound_calls.h"
-#include "dev_table.h"
-
-#ifndef DDB
-#define DDB(x) do {} while (0)
-#endif
-
-#ifndef MDB
-#ifdef MODULE
-#define MDB(x) x
-#else
-#define MDB(x)
-#endif
-#endif
-
-#define TIMER_ARMED	121234
-#define TIMER_NOT_ARMED	1
-
-#define MAX_MEM_BLOCKS 1024
-
-#endif
diff --git a/sound/oss/sound_firmware.h b/sound/oss/sound_firmware.h
deleted file mode 100644
index 2be465277ba0..000000000000
--- a/sound/oss/sound_firmware.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <linux/fs.h>
-
-/**
- *	mod_firmware_load - load sound driver firmware
- *	@fn: filename
- *	@fp: return for the buffer.
- *
- *	Load the firmware for a sound module (up to 128K) into a buffer.
- *	The buffer is returned in *fp. It is allocated with vmalloc so is
- *	virtually linear and not DMAable. The caller should free it with
- *	vfree when finished.
- *
- *	The length of the buffer is returned on a successful load, the
- *	value zero on a failure.
- *
- *	Caution: This API is not recommended. Firmware should be loaded via
- *	request_firmware.
- */
-static inline int mod_firmware_load(const char *fn, char **fp)
-{
-	loff_t size;
-	int err;
-
-	err = kernel_read_file_from_path(fn, (void **)fp, &size,
-					 131072, READING_FIRMWARE);
-	if (err < 0)
-		return 0;
-	return size;
-}
diff --git a/sound/oss/sound_timer.c b/sound/oss/sound_timer.c
deleted file mode 100644
index 3a444a6f10eb..000000000000
--- a/sound/oss/sound_timer.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * sound/oss/sound_timer.c
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- */
-#include <linux/string.h>
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-
-static volatile int initialized, opened, tmr_running;
-static volatile unsigned int tmr_offs, tmr_ctr;
-static volatile unsigned long ticks_offs;
-static volatile int curr_tempo, curr_timebase;
-static volatile unsigned long curr_ticks;
-static volatile unsigned long next_event_time;
-static unsigned long prev_event_time;
-static volatile unsigned long usecs_per_tmr;	/* Length of the current interval */
-
-static struct sound_lowlev_timer *tmr;
-static DEFINE_SPINLOCK(lock);
-
-static unsigned long tmr2ticks(int tmr_value)
-{
-	/*
-	 *    Convert timer ticks to MIDI ticks
-	 */
-
-	unsigned long tmp;
-	unsigned long scale;
-
-	tmp = tmr_value * usecs_per_tmr;	/* Convert to usecs */
-	scale = (60 * 1000000) / (curr_tempo * curr_timebase);	/* usecs per MIDI tick */
-	return (tmp + (scale / 2)) / scale;
-}
-
-void reprogram_timer(void)
-{
-	unsigned long   usecs_per_tick;
-
-	/*
-	 *	The user is changing the timer rate before setting a timer
-	 *	slap, bad bad not allowed.
-	 */
-	 
-	if(!tmr)
-		return;
-		
-	usecs_per_tick = (60 * 1000000) / (curr_tempo * curr_timebase);
-
-	/*
-	 * Don't kill the system by setting too high timer rate
-	 */
-	if (usecs_per_tick < 2000)
-		usecs_per_tick = 2000;
-
-	usecs_per_tmr = tmr->tmr_start(tmr->dev, usecs_per_tick);
-}
-
-void sound_timer_syncinterval(unsigned int new_usecs)
-{
-	/*
-	 *    This routine is called by the hardware level if
-	 *      the clock frequency has changed for some reason.
-	 */
-	tmr_offs = tmr_ctr;
-	ticks_offs += tmr2ticks(tmr_ctr);
-	tmr_ctr = 0;
-	usecs_per_tmr = new_usecs;
-}
-EXPORT_SYMBOL(sound_timer_syncinterval);
-
-static void tmr_reset(void)
-{
-	unsigned long   flags;
-
-	spin_lock_irqsave(&lock,flags);
-	tmr_offs = 0;
-	ticks_offs = 0;
-	tmr_ctr = 0;
-	next_event_time = (unsigned long) -1;
-	prev_event_time = 0;
-	curr_ticks = 0;
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static int timer_open(int dev, int mode)
-{
-	if (opened)
-		return -EBUSY;
-	tmr_reset();
-	curr_tempo = 60;
-	curr_timebase = 100;
-	opened = 1;
-	reprogram_timer();
-	return 0;
-}
-
-static void timer_close(int dev)
-{
-	opened = tmr_running = 0;
-	tmr->tmr_disable(tmr->dev);
-}
-
-static int timer_event(int dev, unsigned char *event)
-{
-	unsigned char cmd = event[1];
-	unsigned long parm = *(int *) &event[4];
-
-	switch (cmd)
-	{
-		case TMR_WAIT_REL:
-			parm += prev_event_time;
-		case TMR_WAIT_ABS:
-			if (parm > 0)
-			{
-				long time;
-
-				if (parm <= curr_ticks)	/* It's the time */
-					return TIMER_NOT_ARMED;
-				time = parm;
-				next_event_time = prev_event_time = time;
-				return TIMER_ARMED;
-			}
-			break;
-
-		case TMR_START:
-			tmr_reset();
-			tmr_running = 1;
-			reprogram_timer();
-			break;
-
-		case TMR_STOP:
-			tmr_running = 0;
-			break;
-
-		case TMR_CONTINUE:
-			tmr_running = 1;
-			reprogram_timer();
-			break;
-
-		case TMR_TEMPO:
-			if (parm)
-			{
-				if (parm < 8)
-					parm = 8;
-				if (parm > 250)
-					parm = 250;
-				tmr_offs = tmr_ctr;
-				ticks_offs += tmr2ticks(tmr_ctr);
-				tmr_ctr = 0;
-				curr_tempo = parm;
-				reprogram_timer();
-			}
-			break;
-
-		case TMR_ECHO:
-			seq_copy_to_input(event, 8);
-			break;
-
-		default:;
-	}
-	return TIMER_NOT_ARMED;
-}
-
-static unsigned long timer_get_time(int dev)
-{
-	if (!opened)
-		return 0;
-	return curr_ticks;
-}
-
-static int timer_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	int __user *p = arg;
-	int val;
-
-	switch (cmd) 
-	{
-		case SNDCTL_TMR_SOURCE:
-			val = TMR_INTERNAL;
-			break;
-
-		case SNDCTL_TMR_START:
-			tmr_reset();
-			tmr_running = 1;
-			return 0;
-		
-		case SNDCTL_TMR_STOP:
-			tmr_running = 0;
-			return 0;
-
-		case SNDCTL_TMR_CONTINUE:
-			tmr_running = 1;
-			return 0;
-
-		case SNDCTL_TMR_TIMEBASE:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val) 
-			{
-				if (val < 1)
-					val = 1;
-				if (val > 1000)
-					val = 1000;
-				curr_timebase = val;
-			}
-			val = curr_timebase;
-			break;
-
-		case SNDCTL_TMR_TEMPO:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val) 
-			{
-				if (val < 8)
-					val = 8;
-				if (val > 250)
-					val = 250;
-				tmr_offs = tmr_ctr;
-				ticks_offs += tmr2ticks(tmr_ctr);
-				tmr_ctr = 0;
-				curr_tempo = val;
-				reprogram_timer();
-			}
-			val = curr_tempo;
-			break;
-
-		case SNDCTL_SEQ_CTRLRATE:
-			if (get_user(val, p))
-				return -EFAULT;
-			if (val != 0)	/* Can't change */
-				return -EINVAL;
-			val = ((curr_tempo * curr_timebase) + 30) / 60;
-			break;
-		
-		case SNDCTL_SEQ_GETTIME:
-			val = curr_ticks;
-			break;
-		
-		case SNDCTL_TMR_METRONOME:
-		default:
-			return -EINVAL;
-	}
-	return put_user(val, p);
-}
-
-static void timer_arm(int dev, long time)
-{
-	if (time < 0)
-		time = curr_ticks + 1;
-	else if (time <= curr_ticks)	/* It's the time */
-		return;
-
-	next_event_time = prev_event_time = time;
-	return;
-}
-
-static struct sound_timer_operations sound_timer =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"Sound Timer", 0},
-	.priority	= 1,	/* Priority */
-	.devlink	= 0,	/* Local device link */
-	.open		= timer_open,
-	.close		= timer_close,
-	.event		= timer_event,
-	.get_time	= timer_get_time,
-	.ioctl		= timer_ioctl,
-	.arm_timer	= timer_arm
-};
-
-void sound_timer_interrupt(void)
-{
-	unsigned long flags;
-	
-	if (!opened)
-		return;
-
-	tmr->tmr_restart(tmr->dev);
-
-	if (!tmr_running)
-		return;
-
-	spin_lock_irqsave(&lock,flags);
-	tmr_ctr++;
-	curr_ticks = ticks_offs + tmr2ticks(tmr_ctr);
-
-	if (curr_ticks >= next_event_time)
-	{
-		next_event_time = (unsigned long) -1;
-		sequencer_timer(0);
-	}
-	spin_unlock_irqrestore(&lock,flags);
-}
-EXPORT_SYMBOL(sound_timer_interrupt);
-
-void  sound_timer_init(struct sound_lowlev_timer *t, char *name)
-{
-	int n;
-
-	if (initialized)
-	{
-		if (t->priority <= tmr->priority)
-			return;	/* There is already a similar or better timer */
-		tmr = t;
-		return;
-	}
-	initialized = 1;
-	tmr = t;
-
-	n = sound_alloc_timerdev();
-	if (n == -1)
-		n = 0;		/* Overwrite the system timer */
-	strlcpy(sound_timer.info.name, name, sizeof(sound_timer.info.name));
-	sound_timer_devs[n] = &sound_timer;
-}
-EXPORT_SYMBOL(sound_timer_init);
-
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
deleted file mode 100644
index b70c7c8f9c5d..000000000000
--- a/sound/oss/soundcard.c
+++ /dev/null
@@ -1,733 +0,0 @@
-/*
- * linux/sound/oss/soundcard.c
- *
- * Sound card driver for Linux
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer     : ioctl code reworked (vmalloc/vfree removed)
- *                   integrated sound_switch.c
- * Stefan Reinauer   : integrated /proc/sound (equals to /dev/sndstat,
- *                   which should disappear in the near future)
- * Eric Dumas	     : devfs support (22-Jan-98) <dumas@linux.eu.org> with
- *                   fixups by C. Scott Ananian <cananian@alumni.princeton.edu>
- * Richard Gooch     : moved common (non OSS-specific) devices to sound_core.c
- * Rob Riggs	     : Added persistent DMA buffers support (1998/10/17)
- * Christoph Hellwig : Some cleanup work (2000/03/01)
- */
-
-
-#include "sound_config.h"
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/fcntl.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
-#include <linux/kmod.h>
-#include <linux/kernel.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/wait.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-/*
- * This ought to be moved into include/asm/dma.h
- */
-#ifndef valid_dma
-#define valid_dma(n) ((n) >= 0 && (n) < MAX_DMA_CHANNELS && (n) != 4)
-#endif
-
-/*
- * Table for permanently allocated memory (used when unloading the module)
- */
-void *          sound_mem_blocks[MAX_MEM_BLOCKS];
-static DEFINE_MUTEX(soundcard_mutex);
-int             sound_nblocks = 0;
-
-/* Persistent DMA buffers */
-#ifdef CONFIG_SOUND_DMAP
-int             sound_dmap_flag = 1;
-#else
-int             sound_dmap_flag = 0;
-#endif
-
-static char     dma_alloc_map[MAX_DMA_CHANNELS];
-
-#define DMA_MAP_UNAVAIL		0
-#define DMA_MAP_FREE		1
-#define DMA_MAP_BUSY		2
-
-
-unsigned long seq_time = 0;	/* Time for /dev/sequencer */
-extern struct class *sound_class;
-
-/*
- * Table for configurable mixer volume handling
- */
-static mixer_vol_table mixer_vols[MAX_MIXER_DEV];
-static int num_mixer_volumes;
-
-int *load_mixer_volumes(char *name, int *levels, int present)
-{
-	int             i, n;
-
-	for (i = 0; i < num_mixer_volumes; i++) {
-		if (strncmp(name, mixer_vols[i].name, 32) == 0) {
-			if (present)
-				mixer_vols[i].num = i;
-			return mixer_vols[i].levels;
-		}
-	}
-	if (num_mixer_volumes >= MAX_MIXER_DEV) {
-		printk(KERN_ERR "Sound: Too many mixers (%s)\n", name);
-		return levels;
-	}
-	n = num_mixer_volumes++;
-
-	strncpy(mixer_vols[n].name, name, 32);
-
-	if (present)
-		mixer_vols[n].num = n;
-	else
-		mixer_vols[n].num = -1;
-
-	for (i = 0; i < 32; i++)
-		mixer_vols[n].levels[i] = levels[i];
-	return mixer_vols[n].levels;
-}
-EXPORT_SYMBOL(load_mixer_volumes);
-
-static int set_mixer_levels(void __user * arg)
-{
-        /* mixer_vol_table is 174 bytes, so IMHO no reason to not allocate it on the stack */
-	mixer_vol_table buf;   
-
-	if (__copy_from_user(&buf, arg, sizeof(buf)))
-		return -EFAULT;
-	load_mixer_volumes(buf.name, buf.levels, 0);
-	if (__copy_to_user(arg, &buf, sizeof(buf)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_mixer_levels(void __user * arg)
-{
-	int n;
-
-	if (__get_user(n, (int __user *)(&(((mixer_vol_table __user *)arg)->num))))
-		return -EFAULT;
-	if (n < 0 || n >= num_mixer_volumes)
-		return -EINVAL;
-	if (__copy_to_user(arg, &mixer_vols[n], sizeof(mixer_vol_table)))
-		return -EFAULT;
-	return 0;
-}
-
-/* 4K page size but our output routines use some slack for overruns */
-#define PROC_BLOCK_SIZE (3*1024)
-
-static ssize_t sound_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
-	int dev = iminor(file_inode(file));
-	int ret = -EINVAL;
-
-	/*
-	 *	The OSS drivers aren't remotely happy without this locking,
-	 *	and unless someone fixes them when they are about to bite the
-	 *	big one anyway, we might as well bandage here..
-	 */
-	 
-	mutex_lock(&soundcard_mutex);
-	
-	switch (dev & 0x0f) {
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		ret = audio_read(dev, file, buf, count);
-		break;
-
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		ret = sequencer_read(dev, file, buf, count);
-		break;
-
-	case SND_DEV_MIDIN:
-		ret = MIDIbuf_read(dev, file, buf, count);
-	}
-	mutex_unlock(&soundcard_mutex);
-	return ret;
-}
-
-static ssize_t sound_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
-{
-	int dev = iminor(file_inode(file));
-	int ret = -EINVAL;
-	
-	mutex_lock(&soundcard_mutex);
-	switch (dev & 0x0f) {
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		ret =  sequencer_write(dev, file, buf, count);
-		break;
-
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		ret = audio_write(dev, file, buf, count);
-		break;
-
-	case SND_DEV_MIDIN:
-		ret =  MIDIbuf_write(dev, file, buf, count);
-		break;
-	}
-	mutex_unlock(&soundcard_mutex);
-	return ret;
-}
-
-static int sound_open(struct inode *inode, struct file *file)
-{
-	int dev = iminor(inode);
-	int retval;
-
-	if ((dev >= SND_NDEVS) || (dev < 0)) {
-		printk(KERN_ERR "Invalid minor device %d\n", dev);
-		return -ENXIO;
-	}
-	mutex_lock(&soundcard_mutex);
-	switch (dev & 0x0f) {
-	case SND_DEV_CTL:
-		dev >>= 4;
-		if (dev >= 0 && dev < MAX_MIXER_DEV && mixer_devs[dev] == NULL) {
-			request_module("mixer%d", dev);
-		}
-		retval = -ENXIO;
-		if (dev && (dev >= num_mixers || mixer_devs[dev] == NULL))
-			break;
-	
-		if (!try_module_get(mixer_devs[dev]->owner))
-			break;
-
-		retval = 0;
-		break;
-
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		retval = sequencer_open(dev, file);
-		break;
-
-	case SND_DEV_MIDIN:
-		retval = MIDIbuf_open(dev, file);
-		break;
-
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		retval = audio_open(dev, file);
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid minor device %d\n", dev);
-		retval = -ENXIO;
-	}
-
-	mutex_unlock(&soundcard_mutex);
-	return retval;
-}
-
-static int sound_release(struct inode *inode, struct file *file)
-{
-	int dev = iminor(inode);
-
-	mutex_lock(&soundcard_mutex);
-	switch (dev & 0x0f) {
-	case SND_DEV_CTL:
-		module_put(mixer_devs[dev >> 4]->owner);
-		break;
-		
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		sequencer_release(dev, file);
-		break;
-
-	case SND_DEV_MIDIN:
-		MIDIbuf_release(dev, file);
-		break;
-
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		audio_release(dev, file);
-		break;
-
-	default:
-		printk(KERN_ERR "Sound error: Releasing unknown device 0x%02x\n", dev);
-	}
-	mutex_unlock(&soundcard_mutex);
-
-	return 0;
-}
-
-static int get_mixer_info(int dev, void __user *arg)
-{
-	mixer_info info;
-	memset(&info, 0, sizeof(info));
-	strlcpy(info.id, mixer_devs[dev]->id, sizeof(info.id));
-	strlcpy(info.name, mixer_devs[dev]->name, sizeof(info.name));
-	info.modify_counter = mixer_devs[dev]->modify_counter;
-	if (__copy_to_user(arg, &info,  sizeof(info)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_old_mixer_info(int dev, void __user *arg)
-{
-	_old_mixer_info info;
-	memset(&info, 0, sizeof(info));
- 	strlcpy(info.id, mixer_devs[dev]->id, sizeof(info.id));
- 	strlcpy(info.name, mixer_devs[dev]->name, sizeof(info.name));
- 	if (copy_to_user(arg, &info,  sizeof(info)))
-		return -EFAULT;
-	return 0;
-}
-
-static int sound_mixer_ioctl(int mixdev, unsigned int cmd, void __user *arg)
-{
- 	if (mixdev < 0 || mixdev >= MAX_MIXER_DEV)
- 		return -ENXIO;
- 	/* Try to load the mixer... */
- 	if (mixer_devs[mixdev] == NULL) {
- 		request_module("mixer%d", mixdev);
- 	}
- 	if (mixdev >= num_mixers || !mixer_devs[mixdev])
- 		return -ENXIO;
-	if (cmd == SOUND_MIXER_INFO)
-		return get_mixer_info(mixdev, arg);
-	if (cmd == SOUND_OLD_MIXER_INFO)
-		return get_old_mixer_info(mixdev, arg);
-	if (_SIOC_DIR(cmd) & _SIOC_WRITE)
-		mixer_devs[mixdev]->modify_counter++;
-	if (!mixer_devs[mixdev]->ioctl)
-		return -EINVAL;
-	return mixer_devs[mixdev]->ioctl(mixdev, cmd, arg);
-}
-
-static long sound_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int len = 0, dtype;
-	int dev = iminor(file_inode(file));
-	long ret = -EINVAL;
-	void __user *p = (void __user *)arg;
-
-	if (_SIOC_DIR(cmd) != _SIOC_NONE && _SIOC_DIR(cmd) != 0) {
-		/*
-		 * Have to validate the address given by the process.
-		 */
-		len = _SIOC_SIZE(cmd);
-		if (len < 1 || len > 65536 || !p)
-			return -EFAULT;
-		if (_SIOC_DIR(cmd) & _SIOC_WRITE)
-			if (!access_ok(VERIFY_READ, p, len))
-				return -EFAULT;
-		if (_SIOC_DIR(cmd) & _SIOC_READ)
-			if (!access_ok(VERIFY_WRITE, p, len))
-				return -EFAULT;
-	}
-	if (cmd == OSS_GETVERSION)
-		return __put_user(SOUND_VERSION, (int __user *)p);
-	
-	mutex_lock(&soundcard_mutex);
-	if (_IOC_TYPE(cmd) == 'M' && num_mixers > 0 &&   /* Mixer ioctl */
-	    (dev & 0x0f) != SND_DEV_CTL) {              
-		dtype = dev & 0x0f;
-		switch (dtype) {
-		case SND_DEV_DSP:
-		case SND_DEV_DSP16:
-		case SND_DEV_AUDIO:
-			ret = sound_mixer_ioctl(audio_devs[dev >> 4]->mixer_dev,
-						 cmd, p);
-			break;			
-		default:
-			ret = sound_mixer_ioctl(dev >> 4, cmd, p);
-			break;
-		}
-		mutex_unlock(&soundcard_mutex);
-		return ret;
-	}
-
-	switch (dev & 0x0f) {
-	case SND_DEV_CTL:
-		if (cmd == SOUND_MIXER_GETLEVELS)
-			ret = get_mixer_levels(p);
-		else if (cmd == SOUND_MIXER_SETLEVELS)
-			ret = set_mixer_levels(p);
-		else
-			ret = sound_mixer_ioctl(dev >> 4, cmd, p);
-		break;
-
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		ret = sequencer_ioctl(dev, file, cmd, p);
-		break;
-
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		ret = audio_ioctl(dev, file, cmd, p);
-		break;
-
-	case SND_DEV_MIDIN:
-		ret = MIDIbuf_ioctl(dev, file, cmd, p);
-		break;
-
-	}
-	mutex_unlock(&soundcard_mutex);
-	return ret;
-}
-
-static unsigned int sound_poll(struct file *file, poll_table * wait)
-{
-	struct inode *inode = file_inode(file);
-	int dev = iminor(inode);
-
-	switch (dev & 0x0f) {
-	case SND_DEV_SEQ:
-	case SND_DEV_SEQ2:
-		return sequencer_poll(dev, file, wait);
-
-	case SND_DEV_MIDIN:
-		return MIDIbuf_poll(dev, file, wait);
-
-	case SND_DEV_DSP:
-	case SND_DEV_DSP16:
-	case SND_DEV_AUDIO:
-		return DMAbuf_poll(file, dev >> 4, wait);
-	}
-	return 0;
-}
-
-static int sound_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	int dev_class;
-	unsigned long size;
-	struct dma_buffparms *dmap = NULL;
-	int dev = iminor(file_inode(file));
-
-	dev_class = dev & 0x0f;
-	dev >>= 4;
-
-	if (dev_class != SND_DEV_DSP && dev_class != SND_DEV_DSP16 && dev_class != SND_DEV_AUDIO) {
-		printk(KERN_ERR "Sound: mmap() not supported for other than audio devices\n");
-		return -EINVAL;
-	}
-	mutex_lock(&soundcard_mutex);
-	if (vma->vm_flags & VM_WRITE)	/* Map write and read/write to the output buf */
-		dmap = audio_devs[dev]->dmap_out;
-	else if (vma->vm_flags & VM_READ)
-		dmap = audio_devs[dev]->dmap_in;
-	else {
-		printk(KERN_ERR "Sound: Undefined mmap() access\n");
-		mutex_unlock(&soundcard_mutex);
-		return -EINVAL;
-	}
-
-	if (dmap == NULL) {
-		printk(KERN_ERR "Sound: mmap() error. dmap == NULL\n");
-		mutex_unlock(&soundcard_mutex);
-		return -EIO;
-	}
-	if (dmap->raw_buf == NULL) {
-		printk(KERN_ERR "Sound: mmap() called when raw_buf == NULL\n");
-		mutex_unlock(&soundcard_mutex);
-		return -EIO;
-	}
-	if (dmap->mapping_flags) {
-		printk(KERN_ERR "Sound: mmap() called twice for the same DMA buffer\n");
-		mutex_unlock(&soundcard_mutex);
-		return -EIO;
-	}
-	if (vma->vm_pgoff != 0) {
-		printk(KERN_ERR "Sound: mmap() offset must be 0.\n");
-		mutex_unlock(&soundcard_mutex);
-		return -EINVAL;
-	}
-	size = vma->vm_end - vma->vm_start;
-
-	if (size != dmap->bytes_in_use) {
-		printk(KERN_WARNING "Sound: mmap() size = %ld. Should be %d\n", size, dmap->bytes_in_use);
-	}
-	if (remap_pfn_range(vma, vma->vm_start,
-			virt_to_phys(dmap->raw_buf) >> PAGE_SHIFT,
-			vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
-		mutex_unlock(&soundcard_mutex);
-		return -EAGAIN;
-	}
-
-	dmap->mapping_flags |= DMA_MAP_MAPPED;
-
-	if( audio_devs[dev]->d->mmap)
-		audio_devs[dev]->d->mmap(dev);
-
-	memset(dmap->raw_buf,
-	       dmap->neutral_byte,
-	       dmap->bytes_in_use);
-	mutex_unlock(&soundcard_mutex);
-	return 0;
-}
-
-const struct file_operations oss_sound_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= sound_read,
-	.write		= sound_write,
-	.poll		= sound_poll,
-	.unlocked_ioctl	= sound_ioctl,
-	.mmap		= sound_mmap,
-	.open		= sound_open,
-	.release	= sound_release,
-};
-
-/*
- *	Create the required special subdevices
- */
- 
-static int create_special_devices(void)
-{
-	int seq1,seq2;
-	seq1=register_sound_special(&oss_sound_fops, 1);
-	if(seq1==-1)
-		goto bad;
-	seq2=register_sound_special(&oss_sound_fops, 8);
-	if(seq2!=-1)
-		return 0;
-	unregister_sound_special(1);
-bad:
-	return -1;
-}
-
-
-static int dmabuf;
-static int dmabug;
-
-module_param(dmabuf, int, 0444);
-module_param(dmabug, int, 0444);
-
-/* additional minors for compatibility */
-struct oss_minor_dev {
-	unsigned short minor;
-	unsigned int enabled;
-} dev_list[] = {
-	{ SND_DEV_DSP16 },
-	{ SND_DEV_AUDIO },
-};
-
-static int __init oss_init(void)
-{
-	int             err;
-	int i, j;
-	
-#ifdef CONFIG_PCI
-	if(dmabug)
-		isa_dma_bridge_buggy = dmabug;
-#endif
-
-	err = create_special_devices();
-	if (err) {
-		printk(KERN_ERR "sound: driver already loaded/included in kernel\n");
-		return err;
-	}
-
-	/* Protecting the innocent */
-	sound_dmap_flag = (dmabuf > 0 ? 1 : 0);
-
-	for (i = 0; i < ARRAY_SIZE(dev_list); i++) {
-		j = 0;
-		do {
-			unsigned short minor = dev_list[i].minor + j * 0x10;
-			if (!register_sound_special(&oss_sound_fops, minor))
-				dev_list[i].enabled = (1 << j);
-		} while (++j < num_audiodevs);
-	}
-
-	if (sound_nblocks >= MAX_MEM_BLOCKS - 1)
-		printk(KERN_ERR "Sound warning: Deallocation table was too small.\n");
-	
-	return 0;
-}
-
-static void __exit oss_cleanup(void)
-{
-	int i, j;
-
-	for (i = 0; i < ARRAY_SIZE(dev_list); i++) {
-		j = 0;
-		do {
-			if (dev_list[i].enabled & (1 << j))
-				unregister_sound_special(dev_list[i].minor);
-		} while (++j < num_audiodevs);
-	}
-	
-	unregister_sound_special(1);
-	unregister_sound_special(8);
-
-	sound_stop_timer();
-
-	sequencer_unload();
-
-	for (i = 0; i < MAX_DMA_CHANNELS; i++)
-		if (dma_alloc_map[i] != DMA_MAP_UNAVAIL) {
-			printk(KERN_ERR "Sound: Hmm, DMA%d was left allocated - fixed\n", i);
-			sound_free_dma(i);
-		}
-
-	for (i = 0; i < sound_nblocks; i++)
-		vfree(sound_mem_blocks[i]);
-
-}
-
-module_init(oss_init);
-module_exit(oss_cleanup);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("OSS Sound subsystem");
-MODULE_AUTHOR("Hannu Savolainen, et al.");
-
-
-int sound_alloc_dma(int chn, char *deviceID)
-{
-	int err;
-
-	if ((err = request_dma(chn, deviceID)) != 0)
-		return err;
-
-	dma_alloc_map[chn] = DMA_MAP_FREE;
-
-	return 0;
-}
-EXPORT_SYMBOL(sound_alloc_dma);
-
-int sound_open_dma(int chn, char *deviceID)
-{
-	if (!valid_dma(chn)) {
-		printk(KERN_ERR "sound_open_dma: Invalid DMA channel %d\n", chn);
-		return 1;
-	}
-
-	if (dma_alloc_map[chn] != DMA_MAP_FREE) {
-		printk("sound_open_dma: DMA channel %d busy or not allocated (%d)\n", chn, dma_alloc_map[chn]);
-		return 1;
-	}
-	dma_alloc_map[chn] = DMA_MAP_BUSY;
-	return 0;
-}
-EXPORT_SYMBOL(sound_open_dma);
-
-void sound_free_dma(int chn)
-{
-	if (dma_alloc_map[chn] == DMA_MAP_UNAVAIL) {
-		/* printk( "sound_free_dma: Bad access to DMA channel %d\n",  chn); */
-		return;
-	}
-	free_dma(chn);
-	dma_alloc_map[chn] = DMA_MAP_UNAVAIL;
-}
-EXPORT_SYMBOL(sound_free_dma);
-
-void sound_close_dma(int chn)
-{
-	if (dma_alloc_map[chn] != DMA_MAP_BUSY) {
-		printk(KERN_ERR "sound_close_dma: Bad access to DMA channel %d\n", chn);
-		return;
-	}
-	dma_alloc_map[chn] = DMA_MAP_FREE;
-}
-EXPORT_SYMBOL(sound_close_dma);
-
-static void do_sequencer_timer(unsigned long dummy)
-{
-	sequencer_timer(0);
-}
-
-
-static DEFINE_TIMER(seq_timer, do_sequencer_timer, 0, 0);
-
-void request_sound_timer(int count)
-{
-	extern unsigned long seq_time;
-
-	if (count < 0) {
-		seq_timer.expires = (-count) + jiffies;
-		add_timer(&seq_timer);
-		return;
-	}
-	count += seq_time;
-
-	count -= jiffies;
-
-	if (count < 1)
-		count = 1;
-
-	seq_timer.expires = (count) + jiffies;
-	add_timer(&seq_timer);
-}
-
-void sound_stop_timer(void)
-{
-	del_timer(&seq_timer);
-}
-
-void conf_printf(char *name, struct address_info *hw_config)
-{
-#ifndef CONFIG_SOUND_TRACEINIT
-	return;
-#else
-	printk("<%s> at 0x%03x", name, hw_config->io_base);
-
-	if (hw_config->irq)
-		printk(" irq %d", (hw_config->irq > 0) ? hw_config->irq : -hw_config->irq);
-
-	if (hw_config->dma != -1 || hw_config->dma2 != -1)
-	{
-		printk(" dma %d", hw_config->dma);
-		if (hw_config->dma2 != -1)
-			printk(",%d", hw_config->dma2);
-	}
-	printk("\n");
-#endif
-}
-EXPORT_SYMBOL(conf_printf);
-
-void conf_printf2(char *name, int base, int irq, int dma, int dma2)
-{
-#ifndef CONFIG_SOUND_TRACEINIT
-	return;
-#else
-	printk("<%s> at 0x%03x", name, base);
-
-	if (irq)
-		printk(" irq %d", (irq > 0) ? irq : -irq);
-
-	if (dma != -1 || dma2 != -1)
-	{
-		  printk(" dma %d", dma);
-		  if (dma2 != -1)
-			  printk(",%d", dma2);
-	}
-	printk("\n");
-#endif
-}
-EXPORT_SYMBOL(conf_printf2);
-
diff --git a/sound/oss/soundvers.h b/sound/oss/soundvers.h
deleted file mode 100644
index e9084d2f46a9..000000000000
--- a/sound/oss/soundvers.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#define SOUND_VERSION_STRING "3.8s2++-971130"
-#define SOUND_INTERNAL_VERSION 0x030804
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
deleted file mode 100644
index 97899352b15f..000000000000
--- a/sound/oss/swarm_cs4297a.c
+++ /dev/null
@@ -1,2781 +0,0 @@
-/*******************************************************************************
-*
-*      "swarm_cs4297a.c" --  Cirrus Logic-Crystal CS4297a linux audio driver.
-*
-*      Copyright (C) 2001  Broadcom Corporation.
-*      Copyright (C) 2000,2001  Cirrus Logic Corp.  
-*            -- adapted from drivers by Thomas Sailer, 
-*            -- but don't bug him; Problems should go to:
-*            -- tom woller (twoller@crystal.cirrus.com) or
-*               (audio@crystal.cirrus.com).
-*            -- adapted from cs4281 PCI driver for cs4297a on
-*               BCM1250 Synchronous Serial interface
-*               (Kip Walker, Broadcom Corp.)
-*      Copyright (C) 2004  Maciej W. Rozycki
-*      Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
-*
-*      This program is free software; you can redistribute it and/or modify
-*      it under the terms of the GNU General Public License as published by
-*      the Free Software Foundation; either version 2 of the License, or
-*      (at your option) any later version.
-*
-*      This program is distributed in the hope that it will be useful,
-*      but WITHOUT ANY WARRANTY; without even the implied warranty of
-*      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-*      GNU General Public License for more details.
-*
-*      You should have received a copy of the GNU General Public License
-*      along with this program; if not, write to the Free Software
-*      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Module command line parameters:
-*   none
-*
-*  Supported devices:
-*  /dev/dsp    standard /dev/dsp device, (mostly) OSS compatible
-*  /dev/mixer  standard /dev/mixer device, (mostly) OSS compatible
-*  /dev/midi   simple MIDI UART interface, no ioctl
-*
-* Modification History
-* 08/20/00 trw - silence and no stopping DAC until release
-* 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop.
-* 09/18/00 trw - added 16bit only record with conversion 
-* 09/24/00 trw - added Enhanced Full duplex (separate simultaneous 
-*                capture/playback rates)
-* 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin  
-*                libOSSm.so)
-* 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal)
-* 11/03/00 trw - fixed interrupt loss/stutter, added debug.
-* 11/10/00 bkz - added __devinit to cs4297a_hw_init()
-* 11/10/00 trw - fixed SMP and capture spinlock hang.
-* 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm.
-* 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix.
-* 12/08/00 trw - added PM support. 
-* 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8 
-*		 (RH/Dell base), 2.2.18, 2.2.12.  cleaned up code mods by ident.
-* 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup.
-* 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use 
-*		 defaultorder-100 as power of 2 for the buffer size. example:
-*		 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size.
-*
-*******************************************************************************/
-
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/sched/signal.h>
-#include <linux/delay.h>
-#include <linux/sound.h>
-#include <linux/slab.h>
-#include <linux/soundcard.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-
-#include <asm/byteorder.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_dma.h>
-#include <asm/sibyte/sb1250_scd.h>
-#include <asm/sibyte/sb1250_syncser.h>
-#include <asm/sibyte/sb1250_mac.h>
-#include <asm/sibyte/sb1250.h>
-
-#include "sleep.h"
-
-struct cs4297a_state;
-
-static DEFINE_MUTEX(swarm_cs4297a_mutex);
-static void stop_dac(struct cs4297a_state *s);
-static void stop_adc(struct cs4297a_state *s);
-static void start_dac(struct cs4297a_state *s);
-static void start_adc(struct cs4297a_state *s);
-#undef OSS_DOCUMENTED_MIXER_SEMANTICS
-
-// --------------------------------------------------------------------- 
-
-#define CS4297a_MAGIC           0xf00beef1
-
-// buffer order determines the size of the dma buffer for the driver.
-// under Linux, a smaller buffer allows more responsiveness from many of the 
-// applications (e.g. games).  A larger buffer allows some of the apps (esound) 
-// to not underrun the dma buffer as easily.  As default, use 32k (order=3)
-// rather than 64k as some of the games work more responsively.
-// log base 2( buff sz = 32k).
-
-//
-// Turn on/off debugging compilation by commenting out "#define CSDEBUG"
-//
-#define CSDEBUG 0
-#if CSDEBUG
-#define CSDEBUG_INTERFACE 1
-#else
-#undef CSDEBUG_INTERFACE
-#endif
-//
-// cs_debugmask areas
-//
-#define CS_INIT	 	0x00000001	// initialization and probe functions
-#define CS_ERROR 	0x00000002	// tmp debugging bit placeholder
-#define CS_INTERRUPT	0x00000004	// interrupt handler (separate from all other)
-#define CS_FUNCTION 	0x00000008	// enter/leave functions
-#define CS_WAVE_WRITE 	0x00000010	// write information for wave
-#define CS_WAVE_READ 	0x00000020	// read information for wave
-#define CS_AC97         0x00000040      // AC97 register access
-#define CS_DESCR        0x00000080      // descriptor management
-#define CS_OPEN		0x00000400	// all open functions in the driver
-#define CS_RELEASE	0x00000800	// all release functions in the driver
-#define CS_PARMS	0x00001000	// functional and operational parameters
-#define CS_IOCTL	0x00002000	// ioctl (non-mixer)
-#define CS_TMP		0x10000000	// tmp debug mask bit
-
-//
-// CSDEBUG is usual mode is set to 1, then use the
-// cs_debuglevel and cs_debugmask to turn on or off debugging.
-// Debug level of 1 has been defined to be kernel errors and info
-// that should be printed on any released driver.
-//
-#if CSDEBUG
-#define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;}
-#else
-#define CS_DBGOUT(mask,level,x)
-#endif
-
-#if CSDEBUG
-static unsigned long cs_debuglevel = 4;	// levels range from 1-9
-static unsigned long cs_debugmask = CS_INIT /*| CS_IOCTL*/;
-module_param(cs_debuglevel, int, 0);
-module_param(cs_debugmask, int, 0);
-#endif
-#define CS_TRUE 	1
-#define CS_FALSE 	0
-
-#define CS_TYPE_ADC 0
-#define CS_TYPE_DAC 1
-
-#define SER_BASE    (A_SER_BASE_1 + KSEG1)
-#define SS_CSR(t)   (SER_BASE+t)
-#define SS_TXTBL(t) (SER_BASE+R_SER_TX_TABLE_BASE+(t*8))
-#define SS_RXTBL(t) (SER_BASE+R_SER_RX_TABLE_BASE+(t*8))
-
-#define FRAME_BYTES            32
-#define FRAME_SAMPLE_BYTES      4
-
-/* Should this be variable? */
-#define SAMPLE_BUF_SIZE        (16*1024)
-#define SAMPLE_FRAME_COUNT     (SAMPLE_BUF_SIZE / FRAME_SAMPLE_BYTES)
-/* The driver can explode/shrink the frames to/from a smaller sample
-   buffer */
-#define DMA_BLOAT_FACTOR       1
-#define DMA_DESCR              (SAMPLE_FRAME_COUNT / DMA_BLOAT_FACTOR)
-#define DMA_BUF_SIZE           (DMA_DESCR * FRAME_BYTES)
-
-/* Use the maxmium count (255 == 5.1 ms between interrupts) */
-#define DMA_INT_CNT            ((1 << S_DMA_INT_PKTCNT) - 1)
-
-/* Figure this out: how many TX DMAs ahead to schedule a reg access */
-#define REG_LATENCY            150
-
-#define FRAME_TX_US             20
-
-#define SERDMA_NEXTBUF(d,f) (((d)->f+1) % (d)->ringsz)
-
-static const char invalid_magic[] =
-    KERN_CRIT "cs4297a: invalid magic value\n";
-
-#define VALIDATE_STATE(s)                          \
-({                                                 \
-        if (!(s) || (s)->magic != CS4297a_MAGIC) { \
-                printk(invalid_magic);             \
-                return -ENXIO;                     \
-        }                                          \
-})
-
-/* AC97 registers */
-#define AC97_MASTER_VOL_STEREO   0x0002      /* Line Out		*/
-#define AC97_PCBEEP_VOL          0x000a      /* none			*/
-#define AC97_PHONE_VOL           0x000c      /* TAD Input (mono)	*/
-#define AC97_MIC_VOL             0x000e      /* MIC Input (mono)	*/
-#define AC97_LINEIN_VOL          0x0010      /* Line Input (stereo)	*/
-#define AC97_CD_VOL              0x0012      /* CD Input (stereo)	*/
-#define AC97_AUX_VOL             0x0016      /* Aux Input (stereo)	*/
-#define AC97_PCMOUT_VOL          0x0018      /* Wave Output (stereo)	*/
-#define AC97_RECORD_SELECT       0x001a      /*			*/
-#define AC97_RECORD_GAIN         0x001c
-#define AC97_GENERAL_PURPOSE     0x0020
-#define AC97_3D_CONTROL          0x0022
-#define AC97_POWER_CONTROL       0x0026
-#define AC97_VENDOR_ID1           0x007c
-
-struct list_head cs4297a_devs = { &cs4297a_devs, &cs4297a_devs };
-
-typedef struct serdma_descr_s {
-        u64 descr_a;
-        u64 descr_b;
-} serdma_descr_t;
-
-typedef unsigned long paddr_t;
-
-typedef struct serdma_s {
-        unsigned         ringsz;
-        serdma_descr_t  *descrtab;
-        serdma_descr_t  *descrtab_end;
-        paddr_t          descrtab_phys;
-        
-        serdma_descr_t  *descr_add;
-        serdma_descr_t  *descr_rem;
-        
-        u64  *dma_buf;           // buffer for DMA contents (frames)
-        paddr_t          dma_buf_phys;
-        u16  *sample_buf;		// tmp buffer for sample conversions
-        u16  *sb_swptr;
-        u16  *sb_hwptr;
-        u16  *sb_end;
-
-        dma_addr_t dmaaddr;
-//        unsigned buforder;	// Log base 2 of 'dma_buf' size in bytes..
-        unsigned numfrag;	// # of 'fragments' in the buffer.
-        unsigned fragshift;	// Log base 2 of fragment size.
-        unsigned hwptr, swptr;
-        unsigned total_bytes;	// # bytes process since open.
-        unsigned blocks;	// last returned blocks value GETOPTR
-        unsigned wakeup;	// interrupt occurred on block 
-        int count;
-        unsigned underrun;	// underrun flag
-        unsigned error;	// over/underrun 
-        wait_queue_head_t wait;
-        wait_queue_head_t reg_wait;
-        // redundant, but makes calculations easier 
-        unsigned fragsize;	// 2**fragshift..
-        unsigned sbufsz;	// 2**buforder.
-        unsigned fragsamples;
-        // OSS stuff 
-        unsigned mapped:1;	// Buffer mapped in cs4297a_mmap()?
-        unsigned ready:1;	// prog_dmabuf_dac()/adc() successful?
-        unsigned endcleared:1;
-        unsigned type:1;	// adc or dac buffer (CS_TYPE_XXX)
-        unsigned ossfragshift;
-        int ossmaxfrags;
-        unsigned subdivision;
-} serdma_t;
-
-struct cs4297a_state {
-	// magic 
-	unsigned int magic;
-
-	struct list_head list;
-
-	// soundcore stuff 
-	int dev_audio;
-	int dev_mixer;
-
-	// hardware resources 
-	unsigned int irq;
-
-        struct {
-                unsigned int rx_ovrrn; /* FIFO */
-                unsigned int rx_overflow; /* staging buffer */
-                unsigned int tx_underrun;
-                unsigned int rx_bad;
-                unsigned int rx_good;
-        } stats;
-
-	// mixer registers 
-	struct {
-		unsigned short vol[10];
-		unsigned int recsrc;
-		unsigned int modcnt;
-		unsigned short micpreamp;
-	} mix;
-
-	// wave stuff   
-	struct properties {
-		unsigned fmt;
-		unsigned fmt_original;	// original requested format
-		unsigned channels;
-		unsigned rate;
-	} prop_dac, prop_adc;
-	unsigned conversion:1;	// conversion from 16 to 8 bit in progress
-	unsigned ena;
-	spinlock_t lock;
-	struct mutex open_mutex;
-	struct mutex open_sem_adc;
-	struct mutex open_sem_dac;
-	fmode_t open_mode;
-	wait_queue_head_t open_wait;
-	wait_queue_head_t open_wait_adc;
-	wait_queue_head_t open_wait_dac;
-
-	dma_addr_t dmaaddr_sample_buf;
-	unsigned buforder_sample_buf;	// Log base 2 of 'dma_buf' size in bytes..
-
-        serdma_t dma_dac, dma_adc;
-
-        volatile u16 read_value;
-        volatile u16 read_reg;
-        volatile u64 reg_request;
-};
-
-#if 1
-#define prog_codec(a,b)
-#define dealloc_dmabuf(a,b);
-#endif
-
-static int prog_dmabuf_adc(struct cs4297a_state *s)
-{
-	s->dma_adc.ready = 1;
-	return 0;
-}
-
-
-static int prog_dmabuf_dac(struct cs4297a_state *s)
-{
-	s->dma_dac.ready = 1;
-	return 0;
-}
-
-static void clear_advance(void *buf, unsigned bsize, unsigned bptr,
-			  unsigned len, unsigned char c)
-{
-	if (bptr + len > bsize) {
-		unsigned x = bsize - bptr;
-		memset(((char *) buf) + bptr, c, x);
-		bptr = 0;
-		len -= x;
-	}
-	CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
-		"cs4297a: clear_advance(): memset %d at 0x%.8x for %d size \n",
-			(unsigned)c, (unsigned)((char *) buf) + bptr, len));
-	memset(((char *) buf) + bptr, c, len);
-}
-
-#if CSDEBUG
-
-// DEBUG ROUTINES
-
-#define SOUND_MIXER_CS_GETDBGLEVEL 	_SIOWR('M',120, int)
-#define SOUND_MIXER_CS_SETDBGLEVEL 	_SIOWR('M',121, int)
-#define SOUND_MIXER_CS_GETDBGMASK 	_SIOWR('M',122, int)
-#define SOUND_MIXER_CS_SETDBGMASK 	_SIOWR('M',123, int)
-
-static void cs_printioctl(unsigned int x)
-{
-	unsigned int i;
-	unsigned char vidx;
-	// Index of mixtable1[] member is Device ID 
-	// and must be <= SOUND_MIXER_NRDEVICES.
-	// Value of array member is index into s->mix.vol[]
-	static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
-		[SOUND_MIXER_PCM] = 1,	// voice 
-		[SOUND_MIXER_LINE1] = 2,	// AUX
-		[SOUND_MIXER_CD] = 3,	// CD 
-		[SOUND_MIXER_LINE] = 4,	// Line 
-		[SOUND_MIXER_SYNTH] = 5,	// FM
-		[SOUND_MIXER_MIC] = 6,	// Mic 
-		[SOUND_MIXER_SPEAKER] = 7,	// Speaker 
-		[SOUND_MIXER_RECLEV] = 8,	// Recording level 
-		[SOUND_MIXER_VOLUME] = 9	// Master Volume 
-	};
-
-	switch (x) {
-	case SOUND_MIXER_CS_GETDBGMASK:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_MIXER_CS_GETDBGMASK:\n"));
-		break;
-	case SOUND_MIXER_CS_GETDBGLEVEL:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_MIXER_CS_GETDBGLEVEL:\n"));
-		break;
-	case SOUND_MIXER_CS_SETDBGMASK:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_MIXER_CS_SETDBGMASK:\n"));
-		break;
-	case SOUND_MIXER_CS_SETDBGLEVEL:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_MIXER_CS_SETDBGLEVEL:\n"));
-		break;
-	case OSS_GETVERSION:
-		CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n"));
-		break;
-	case SNDCTL_DSP_SYNC:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n"));
-		break;
-	case SNDCTL_DSP_SETDUPLEX:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n"));
-		break;
-	case SNDCTL_DSP_GETCAPS:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n"));
-		break;
-	case SNDCTL_DSP_RESET:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n"));
-		break;
-	case SNDCTL_DSP_SPEED:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n"));
-		break;
-	case SNDCTL_DSP_STEREO:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n"));
-		break;
-	case SNDCTL_DSP_CHANNELS:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n"));
-		break;
-	case SNDCTL_DSP_GETFMTS:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n"));
-		break;
-	case SNDCTL_DSP_SETFMT:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n"));
-		break;
-	case SNDCTL_DSP_POST:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n"));
-		break;
-	case SNDCTL_DSP_GETTRIGGER:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n"));
-		break;
-	case SNDCTL_DSP_SETTRIGGER:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n"));
-		break;
-	case SNDCTL_DSP_GETOSPACE:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n"));
-		break;
-	case SNDCTL_DSP_GETISPACE:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n"));
-		break;
-	case SNDCTL_DSP_NONBLOCK:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n"));
-		break;
-	case SNDCTL_DSP_GETODELAY:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n"));
-		break;
-	case SNDCTL_DSP_GETIPTR:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n"));
-		break;
-	case SNDCTL_DSP_GETOPTR:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n"));
-		break;
-	case SNDCTL_DSP_GETBLKSIZE:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n"));
-		break;
-	case SNDCTL_DSP_SETFRAGMENT:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SNDCTL_DSP_SETFRAGMENT:\n"));
-		break;
-	case SNDCTL_DSP_SUBDIVIDE:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n"));
-		break;
-	case SOUND_PCM_READ_RATE:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n"));
-		break;
-	case SOUND_PCM_READ_CHANNELS:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_PCM_READ_CHANNELS:\n"));
-		break;
-	case SOUND_PCM_READ_BITS:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n"));
-		break;
-	case SOUND_PCM_WRITE_FILTER:
-		CS_DBGOUT(CS_IOCTL, 4,
-			  printk("SOUND_PCM_WRITE_FILTER:\n"));
-		break;
-	case SNDCTL_DSP_SETSYNCRO:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n"));
-		break;
-	case SOUND_PCM_READ_FILTER:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n"));
-		break;
-	case SOUND_MIXER_PRIVATE1:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n"));
-		break;
-	case SOUND_MIXER_PRIVATE2:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n"));
-		break;
-	case SOUND_MIXER_PRIVATE3:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n"));
-		break;
-	case SOUND_MIXER_PRIVATE4:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n"));
-		break;
-	case SOUND_MIXER_PRIVATE5:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n"));
-		break;
-	case SOUND_MIXER_INFO:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n"));
-		break;
-	case SOUND_OLD_MIXER_INFO:
-		CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n"));
-		break;
-
-	default:
-		switch (_IOC_NR(x)) {
-		case SOUND_MIXER_VOLUME:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_VOLUME:\n"));
-			break;
-		case SOUND_MIXER_SPEAKER:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_SPEAKER:\n"));
-			break;
-		case SOUND_MIXER_RECLEV:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_RECLEV:\n"));
-			break;
-		case SOUND_MIXER_MIC:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_MIC:\n"));
-			break;
-		case SOUND_MIXER_SYNTH:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_SYNTH:\n"));
-			break;
-		case SOUND_MIXER_RECSRC:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_RECSRC:\n"));
-			break;
-		case SOUND_MIXER_DEVMASK:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_DEVMASK:\n"));
-			break;
-		case SOUND_MIXER_RECMASK:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_RECMASK:\n"));
-			break;
-		case SOUND_MIXER_STEREODEVS:
-			CS_DBGOUT(CS_IOCTL, 4,
-				  printk("SOUND_MIXER_STEREODEVS:\n"));
-			break;
-		case SOUND_MIXER_CAPS:
-			CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n"));
-			break;
-		default:
-			i = _IOC_NR(x);
-			if (i >= SOUND_MIXER_NRDEVICES
-			    || !(vidx = mixtable1[i])) {
-				CS_DBGOUT(CS_IOCTL, 4, printk
-					("UNKNOWN IOCTL: 0x%.8x NR=%d\n",
-						x, i));
-			} else {
-				CS_DBGOUT(CS_IOCTL, 4, printk
-					("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n",
-						x, i));
-			}
-			break;
-		}
-	}
-}
-#endif
-
-
-static int ser_init(struct cs4297a_state *s)
-{
-        int i;
-
-        CS_DBGOUT(CS_INIT, 2, 
-                  printk(KERN_INFO "cs4297a: Setting up serial parameters\n"));
-
-        __raw_writeq(M_SYNCSER_CMD_RX_RESET | M_SYNCSER_CMD_TX_RESET, SS_CSR(R_SER_CMD));
-
-        __raw_writeq(M_SYNCSER_MSB_FIRST, SS_CSR(R_SER_MODE));
-        __raw_writeq(32, SS_CSR(R_SER_MINFRM_SZ));
-        __raw_writeq(32, SS_CSR(R_SER_MAXFRM_SZ));
-
-        __raw_writeq(1, SS_CSR(R_SER_TX_RD_THRSH));
-        __raw_writeq(4, SS_CSR(R_SER_TX_WR_THRSH));
-        __raw_writeq(8, SS_CSR(R_SER_RX_RD_THRSH));
-
-        /* This looks good from experimentation */
-        __raw_writeq((M_SYNCSER_TXSYNC_INT | V_SYNCSER_TXSYNC_DLY(0) | M_SYNCSER_TXCLK_EXT |
-               M_SYNCSER_RXSYNC_INT | V_SYNCSER_RXSYNC_DLY(1) | M_SYNCSER_RXCLK_EXT | M_SYNCSER_RXSYNC_EDGE),
-              SS_CSR(R_SER_LINE_MODE));
-
-        /* This looks good from experimentation */
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
-              SS_TXTBL(0));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
-              SS_TXTBL(1));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
-              SS_TXTBL(2));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE |
-              M_SYNCSER_SEQ_STROBE | M_SYNCSER_SEQ_LAST, SS_TXTBL(3));
-
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
-              SS_RXTBL(0));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
-              SS_RXTBL(1));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
-              SS_RXTBL(2));
-        __raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE |
-              M_SYNCSER_SEQ_LAST, SS_RXTBL(3));
-
-        for (i=4; i<16; i++) {
-                /* Just in case... */
-                __raw_writeq(M_SYNCSER_SEQ_LAST, SS_TXTBL(i));
-                __raw_writeq(M_SYNCSER_SEQ_LAST, SS_RXTBL(i));
-        }
-
-        return 0;
-}
-
-static int init_serdma(serdma_t *dma)
-{
-        CS_DBGOUT(CS_INIT, 2,
-                  printk(KERN_ERR "cs4297a: desc - %d sbufsize - %d dbufsize - %d\n",
-                         DMA_DESCR, SAMPLE_BUF_SIZE, DMA_BUF_SIZE));
-
-        /* Descriptors */
-        dma->ringsz = DMA_DESCR;
-        dma->descrtab = kzalloc(dma->ringsz * sizeof(serdma_descr_t), GFP_KERNEL);
-        if (!dma->descrtab) {
-                printk(KERN_ERR "cs4297a: kzalloc descrtab failed\n");
-                return -1;
-        }
-        dma->descrtab_end = dma->descrtab + dma->ringsz;
-	/* XXX bloddy mess, use proper DMA API here ...  */
-	dma->descrtab_phys = CPHYSADDR((long)dma->descrtab);
-        dma->descr_add = dma->descr_rem = dma->descrtab;
-
-        /* Frame buffer area */
-        dma->dma_buf = kzalloc(DMA_BUF_SIZE, GFP_KERNEL);
-        if (!dma->dma_buf) {
-                printk(KERN_ERR "cs4297a: kzalloc dma_buf failed\n");
-                kfree(dma->descrtab);
-                return -1;
-        }
-        dma->dma_buf_phys = CPHYSADDR((long)dma->dma_buf);
-
-        /* Samples buffer area */
-        dma->sbufsz = SAMPLE_BUF_SIZE;
-        dma->sample_buf = kmalloc(dma->sbufsz, GFP_KERNEL);
-        if (!dma->sample_buf) {
-                printk(KERN_ERR "cs4297a: kmalloc sample_buf failed\n");
-                kfree(dma->descrtab);
-                kfree(dma->dma_buf);
-                return -1;
-        }
-        dma->sb_swptr = dma->sb_hwptr = dma->sample_buf;
-        dma->sb_end = (u16 *)((void *)dma->sample_buf + dma->sbufsz);
-        dma->fragsize = dma->sbufsz >> 1;
-
-        CS_DBGOUT(CS_INIT, 4, 
-                  printk(KERN_ERR "cs4297a: descrtab - %08x dma_buf - %x sample_buf - %x\n",
-                         (int)dma->descrtab, (int)dma->dma_buf, 
-                         (int)dma->sample_buf));
-
-        return 0;
-}
-
-static int dma_init(struct cs4297a_state *s)
-{
-        int i;
-
-        CS_DBGOUT(CS_INIT, 2, 
-                  printk(KERN_INFO "cs4297a: Setting up DMA\n"));
-
-        if (init_serdma(&s->dma_adc) ||
-            init_serdma(&s->dma_dac))
-                return -1;
-
-        if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX))||
-            __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) {
-                panic("DMA state corrupted?!");
-        }
-
-        /* Initialize now - the descr/buffer pairings will never
-           change... */
-        for (i=0; i<DMA_DESCR; i++) {
-                s->dma_dac.descrtab[i].descr_a = M_DMA_SERRX_SOP | V_DMA_DSCRA_A_SIZE(1) | 
-                        (s->dma_dac.dma_buf_phys + i*FRAME_BYTES);
-                s->dma_dac.descrtab[i].descr_b = V_DMA_DSCRB_PKT_SIZE(FRAME_BYTES);
-                s->dma_adc.descrtab[i].descr_a = V_DMA_DSCRA_A_SIZE(1) |
-                        (s->dma_adc.dma_buf_phys + i*FRAME_BYTES);
-                s->dma_adc.descrtab[i].descr_b = 0;
-        }
-
-        __raw_writeq((M_DMA_EOP_INT_EN | V_DMA_INT_PKTCNT(DMA_INT_CNT) |
-               V_DMA_RINGSZ(DMA_DESCR) | M_DMA_TDX_EN),
-              SS_CSR(R_SER_DMA_CONFIG0_RX));
-        __raw_writeq(M_DMA_L2CA, SS_CSR(R_SER_DMA_CONFIG1_RX));
-        __raw_writeq(s->dma_adc.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_RX));
-
-        __raw_writeq(V_DMA_RINGSZ(DMA_DESCR), SS_CSR(R_SER_DMA_CONFIG0_TX));
-        __raw_writeq(M_DMA_L2CA | M_DMA_NO_DSCR_UPDT, SS_CSR(R_SER_DMA_CONFIG1_TX));
-        __raw_writeq(s->dma_dac.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_TX));
-
-        /* Prep the receive DMA descriptor ring */
-        __raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
-
-        __raw_writeq(M_SYNCSER_DMA_RX_EN | M_SYNCSER_DMA_TX_EN, SS_CSR(R_SER_DMA_ENABLE));
-
-        __raw_writeq((M_SYNCSER_RX_SYNC_ERR | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_EOP_COUNT),
-              SS_CSR(R_SER_INT_MASK));
-
-        /* Enable the rx/tx; let the codec warm up to the sync and
-           start sending good frames before the receive FIFO is
-           enabled */
-        __raw_writeq(M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
-        udelay(1000);
-        __raw_writeq(M_SYNCSER_CMD_RX_EN | M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
-
-        /* XXXKW is this magic? (the "1" part) */
-        while ((__raw_readq(SS_CSR(R_SER_STATUS)) & 0xf1) != 1)
-                ;
-
-        CS_DBGOUT(CS_INIT, 4, 
-                  printk(KERN_INFO "cs4297a: status: %08x\n",
-                         (unsigned int)(__raw_readq(SS_CSR(R_SER_STATUS)) & 0xffffffff)));
-
-        return 0;
-}
-
-static int serdma_reg_access(struct cs4297a_state *s, u64 data)
-{
-        serdma_t *d = &s->dma_dac;
-        u64 *data_p;
-        unsigned swptr;
-        unsigned long flags;
-        serdma_descr_t *descr;
-
-        if (s->reg_request) {
-                printk(KERN_ERR "cs4297a: attempt to issue multiple reg_access\n");
-                return -1;
-        }
-
-        if (s->ena & FMODE_WRITE) {
-                /* Since a writer has the DSP open, we have to mux the
-                   request in */
-                s->reg_request = data;
-		oss_broken_sleep_on(&s->dma_dac.reg_wait, MAX_SCHEDULE_TIMEOUT);
-                /* XXXKW how can I deal with the starvation case where
-                   the opener isn't writing? */
-        } else {
-                /* Be safe when changing ring pointers */
-		spin_lock_irqsave(&s->lock, flags);
-                if (d->hwptr != d->swptr) {
-                        printk(KERN_ERR "cs4297a: reg access found bookkeeping error (hw/sw = %d/%d\n",
-                               d->hwptr, d->swptr);
-                        spin_unlock_irqrestore(&s->lock, flags);
-                        return -1;
-                }
-                swptr = d->swptr;
-                d->hwptr = d->swptr = (d->swptr + 1) % d->ringsz;
-		spin_unlock_irqrestore(&s->lock, flags);
-
-                descr = &d->descrtab[swptr];
-                data_p = &d->dma_buf[swptr * 4];
-		*data_p = cpu_to_be64(data);
-                __raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
-                CS_DBGOUT(CS_DESCR, 4,
-                          printk(KERN_INFO "cs4297a: add_tx  %p (%x -> %x)\n",
-                                 data_p, swptr, d->hwptr));
-        }
-
-        CS_DBGOUT(CS_FUNCTION, 6,
-                  printk(KERN_INFO "cs4297a: serdma_reg_access()-\n"));
-        
-        return 0;
-}
-
-//****************************************************************************
-// "cs4297a_read_ac97" -- Reads an AC97 register
-//****************************************************************************
-static int cs4297a_read_ac97(struct cs4297a_state *s, u32 offset,
-			    u32 * value)
-{
-        CS_DBGOUT(CS_AC97, 1,
-                  printk(KERN_INFO "cs4297a: read reg %2x\n", offset));
-        if (serdma_reg_access(s, (0xCLL << 60) | (1LL << 47) | ((u64)(offset & 0x7F) << 40)))
-                return -1;
-
-	oss_broken_sleep_on(&s->dma_adc.reg_wait, MAX_SCHEDULE_TIMEOUT);
-        *value = s->read_value;
-        CS_DBGOUT(CS_AC97, 2,
-                  printk(KERN_INFO "cs4297a: rdr reg %x -> %x\n", s->read_reg, s->read_value));
-
-        return 0;
-}
-
-
-//****************************************************************************
-// "cs4297a_write_ac97()"-- writes an AC97 register
-//****************************************************************************
-static int cs4297a_write_ac97(struct cs4297a_state *s, u32 offset,
-			     u32 value)
-{
-        CS_DBGOUT(CS_AC97, 1,
-                  printk(KERN_INFO "cs4297a: write reg %2x -> %04x\n", offset, value));
-        return (serdma_reg_access(s, (0xELL << 60) | ((u64)(offset & 0x7F) << 40) | ((value & 0xffff) << 12)));
-}
-
-static void stop_dac(struct cs4297a_state *s)
-{
-	unsigned long flags;
-
-	CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4297a: stop_dac():\n"));
-	spin_lock_irqsave(&s->lock, flags);
-	s->ena &= ~FMODE_WRITE;
-#if 0
-        /* XXXKW what do I really want here?  My theory for now is
-           that I just flip the "ena" bit, and the interrupt handler
-           will stop processing the xmit channel */
-        __raw_writeq((s->ena & FMODE_READ) ? M_SYNCSER_DMA_RX_EN : 0,
-              SS_CSR(R_SER_DMA_ENABLE));
-#endif
-
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-
-static void start_dac(struct cs4297a_state *s)
-{
-	unsigned long flags;
-
-	CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4297a: start_dac()+\n"));
-	spin_lock_irqsave(&s->lock, flags);
-	if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped ||
-					(s->dma_dac.count > 0
-	    				&& s->dma_dac.ready))) {
-		s->ena |= FMODE_WRITE;
-                /* XXXKW what do I really want here?  My theory for
-                   now is that I just flip the "ena" bit, and the
-                   interrupt handler will start processing the xmit
-                   channel */
-
-		CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO
-			"cs4297a: start_dac(): start dma\n"));
-
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	CS_DBGOUT(CS_FUNCTION, 3,
-		  printk(KERN_INFO "cs4297a: start_dac()-\n"));
-}
-
-
-static void stop_adc(struct cs4297a_state *s)
-{
-	unsigned long flags;
-
-	CS_DBGOUT(CS_FUNCTION, 3,
-		  printk(KERN_INFO "cs4297a: stop_adc()+\n"));
-
-	spin_lock_irqsave(&s->lock, flags);
-	s->ena &= ~FMODE_READ;
-
-	if (s->conversion == 1) {
-		s->conversion = 0;
-		s->prop_adc.fmt = s->prop_adc.fmt_original;
-	}
-        /* Nothing to do really, I need to keep the DMA going
-           XXXKW when do I get here, and is there more I should do? */
-	spin_unlock_irqrestore(&s->lock, flags);
-	CS_DBGOUT(CS_FUNCTION, 3,
-		  printk(KERN_INFO "cs4297a: stop_adc()-\n"));
-}
-
-
-static void start_adc(struct cs4297a_state *s)
-{
-	unsigned long flags;
-
-	CS_DBGOUT(CS_FUNCTION, 2,
-		  printk(KERN_INFO "cs4297a: start_adc()+\n"));
-
-	if (!(s->ena & FMODE_READ) &&
-	    (s->dma_adc.mapped || s->dma_adc.count <=
-	     (signed) (s->dma_adc.sbufsz - 2 * s->dma_adc.fragsize))
-	    && s->dma_adc.ready) {
-		if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
-			// 
-			// now only use 16 bit capture, due to truncation issue
-			// in the chip, noticeable distortion occurs.
-			// allocate buffer and then convert from 16 bit to 
-			// 8 bit for the user buffer.
-			//
-			s->prop_adc.fmt_original = s->prop_adc.fmt;
-			if (s->prop_adc.fmt & AFMT_S8) {
-				s->prop_adc.fmt &= ~AFMT_S8;
-				s->prop_adc.fmt |= AFMT_S16_LE;
-			}
-			if (s->prop_adc.fmt & AFMT_U8) {
-				s->prop_adc.fmt &= ~AFMT_U8;
-				s->prop_adc.fmt |= AFMT_U16_LE;
-			}
-			//
-			// prog_dmabuf_adc performs a stop_adc() but that is
-			// ok since we really haven't started the DMA yet.
-			//
-			prog_codec(s, CS_TYPE_ADC);
-
-                        prog_dmabuf_adc(s);
-			s->conversion = 1;
-		}
-		spin_lock_irqsave(&s->lock, flags);
-		s->ena |= FMODE_READ;
-                /* Nothing to do really, I am probably already
-                   DMAing...  XXXKW when do I get here, and is there
-                   more I should do? */
-		spin_unlock_irqrestore(&s->lock, flags);
-
-		CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO
-			 "cs4297a: start_adc(): start adc\n"));
-	}
-	CS_DBGOUT(CS_FUNCTION, 2,
-		  printk(KERN_INFO "cs4297a: start_adc()-\n"));
-
-}
-
-
-// call with spinlock held! 
-static void cs4297a_update_ptr(struct cs4297a_state *s, int intflag)
-{
-	int good_diff, diff, diff2;
-        u64 *data_p, data;
-        u32 *s_ptr;
-	unsigned hwptr;
-        u32 status;
-        serdma_t *d;
-        serdma_descr_t *descr;
-
-	// update ADC pointer 
-        status = intflag ? __raw_readq(SS_CSR(R_SER_STATUS)) : 0;
-
-	if ((s->ena & FMODE_READ) || (status & (M_SYNCSER_RX_EOP_COUNT))) {
-                d = &s->dma_adc;
-                hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
-                                     d->descrtab_phys) / sizeof(serdma_descr_t));
-
-                if (s->ena & FMODE_READ) {
-                        CS_DBGOUT(CS_FUNCTION, 2, 
-                                  printk(KERN_INFO "cs4297a: upd_rcv sw->hw->hw %x/%x/%x (int-%d)n",
-                                         d->swptr, d->hwptr, hwptr, intflag));
-                        /* Number of DMA buffers available for software: */
-                        diff2 = diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
-                        d->hwptr = hwptr;
-                        good_diff = 0;
-                        s_ptr = (u32 *)&(d->dma_buf[d->swptr*4]);
-                        descr = &d->descrtab[d->swptr];
-                        while (diff2--) {
-				u64 data = be64_to_cpu(*(u64 *)s_ptr);
-                                u64 descr_a;
-                                u16 left, right;
-                                descr_a = descr->descr_a;
-                                descr->descr_a &= ~M_DMA_SERRX_SOP;
-                                if ((descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)s_ptr)) {
-                                        printk(KERN_ERR "cs4297a: RX Bad address (read)\n");
-                                }
-                                if (((data & 0x9800000000000000) != 0x9800000000000000) ||
-                                    (!(descr_a & M_DMA_SERRX_SOP)) ||
-                                    (G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
-                                        s->stats.rx_bad++;
-                                        printk(KERN_DEBUG "cs4297a: RX Bad attributes (read)\n");
-                                        continue;
-                                }
-                                s->stats.rx_good++;
-                                if ((data >> 61) == 7) {
-                                        s->read_value = (data >> 12) & 0xffff;
-                                        s->read_reg = (data >> 40) & 0x7f;
-                                        wake_up(&d->reg_wait);
-                                }
-                                if (d->count && (d->sb_hwptr == d->sb_swptr)) {
-                                        s->stats.rx_overflow++;
-                                        printk(KERN_DEBUG "cs4297a: RX overflow\n");
-                                        continue;
-                                }
-                                good_diff++;
-				left = ((be32_to_cpu(s_ptr[1]) & 0xff) << 8) |
-				       ((be32_to_cpu(s_ptr[2]) >> 24) & 0xff);
-				right = (be32_to_cpu(s_ptr[2]) >> 4) & 0xffff;
-				*d->sb_hwptr++ = cpu_to_be16(left);
-				*d->sb_hwptr++ = cpu_to_be16(right);
-                                if (d->sb_hwptr == d->sb_end)
-                                        d->sb_hwptr = d->sample_buf;
-                                descr++;
-                                if (descr == d->descrtab_end) {
-                                        descr = d->descrtab;
-                                        s_ptr = (u32 *)s->dma_adc.dma_buf;
-                                } else {
-                                        s_ptr += 8;
-                                }
-                        }
-                        d->total_bytes += good_diff * FRAME_SAMPLE_BYTES;
-                        d->count += good_diff * FRAME_SAMPLE_BYTES;
-                        if (d->count > d->sbufsz) {
-                                printk(KERN_ERR "cs4297a: bogus receive overflow!!\n");
-                        }
-                        d->swptr = (d->swptr + diff) % d->ringsz;
-                        __raw_writeq(diff, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
-                        if (d->mapped) {
-                                if (d->count >= (signed) d->fragsize)
-                                        wake_up(&d->wait);
-                        } else {
-                                if (d->count > 0) {
-                                        CS_DBGOUT(CS_WAVE_READ, 4,
-                                                  printk(KERN_INFO
-                                                         "cs4297a: update count -> %d\n", d->count));
-                                        wake_up(&d->wait);
-                                }
-                        }
-                } else {
-                        /* Receive is going even if no one is
-                           listening (for register accesses and to
-                           avoid FIFO overrun) */
-                        diff2 = diff = (hwptr + d->ringsz - d->hwptr) % d->ringsz;
-                        if (!diff) {
-                                printk(KERN_ERR "cs4297a: RX full or empty?\n");
-                        }
-                        
-                        descr = &d->descrtab[d->swptr];
-                        data_p = &d->dma_buf[d->swptr*4];
-
-                        /* Force this to happen at least once; I got
-                           here because of an interrupt, so there must
-                           be a buffer to process. */
-                        do {
-				data = be64_to_cpu(*data_p);
-                                if ((descr->descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)data_p)) {
-                                        printk(KERN_ERR "cs4297a: RX Bad address %d (%llx %lx)\n", d->swptr,
-                                               (long long)(descr->descr_a & M_DMA_DSCRA_A_ADDR),
-                                               (long)CPHYSADDR((long)data_p));
-                                }
-                                if (!(data & (1LL << 63)) ||
-                                    !(descr->descr_a & M_DMA_SERRX_SOP) ||
-                                    (G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
-                                        s->stats.rx_bad++;
-                                        printk(KERN_DEBUG "cs4297a: RX Bad attributes\n");
-                                } else {
-                                        s->stats.rx_good++;
-                                        if ((data >> 61) == 7) {
-                                                s->read_value = (data >> 12) & 0xffff;
-                                                s->read_reg = (data >> 40) & 0x7f;
-                                                wake_up(&d->reg_wait);
-                                        }
-                                }
-                                descr->descr_a &= ~M_DMA_SERRX_SOP;
-                                descr++;
-                                d->swptr++;
-                                data_p += 4;
-                                if (descr == d->descrtab_end) {
-                                        descr = d->descrtab;
-                                        d->swptr = 0;
-                                        data_p = d->dma_buf;
-                                }
-                                __raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
-                        } while (--diff);
-                        d->hwptr = hwptr;
-
-                        CS_DBGOUT(CS_DESCR, 6, 
-                                  printk(KERN_INFO "cs4297a: hw/sw %x/%x\n", d->hwptr, d->swptr));
-                }
-
-		CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
-			"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
-				(unsigned)s, d->hwptr, 
-				d->total_bytes, d->count));
-	}
-
-        /* XXXKW worry about s->reg_request -- there is a starvation
-           case if s->ena has FMODE_WRITE on, but the client isn't
-           doing writes */
-
-	// update DAC pointer 
-	//
-	// check for end of buffer, means that we are going to wait for another interrupt
-	// to allow silence to fill the fifos on the part, to keep pops down to a minimum.
-	//
-	if (s->ena & FMODE_WRITE) {
-                serdma_t *d = &s->dma_dac;
-                hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
-                                     d->descrtab_phys) / sizeof(serdma_descr_t));
-                diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
-                CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
-                                                   "cs4297a: cs4297a_update_ptr(): hw/hw/sw %x/%x/%x diff %d count %d\n",
-                                                   d->hwptr, hwptr, d->swptr, diff, d->count));
-                d->hwptr = hwptr;
-                /* XXXKW stereo? conversion? Just assume 2 16-bit samples for now */
-                d->total_bytes += diff * FRAME_SAMPLE_BYTES;
-		if (d->mapped) {
-			d->count += diff * FRAME_SAMPLE_BYTES;
-			if (d->count >= d->fragsize) {
-				d->wakeup = 1;
-				wake_up(&d->wait);
-				if (d->count > d->sbufsz)
-					d->count &= d->sbufsz - 1;
-			}
-		} else {
-			d->count -= diff * FRAME_SAMPLE_BYTES;
-			if (d->count <= 0) {
-				//
-				// fill with silence, and do not shut down the DAC.
-				// Continue to play silence until the _release.
-				//
-				CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO
-					"cs4297a: cs4297a_update_ptr(): memset %d at 0x%.8x for %d size \n",
-						(unsigned)(s->prop_dac.fmt & 
-						(AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, 
-						(unsigned)d->dma_buf, 
-						d->ringsz));
-				memset(d->dma_buf, 0, d->ringsz * FRAME_BYTES);
-				if (d->count < 0) {
-					d->underrun = 1;
-                                        s->stats.tx_underrun++;
-					d->count = 0;
-					CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO
-					 "cs4297a: cs4297a_update_ptr(): underrun\n"));
-				}
-			} else if (d->count <=
-				   (signed) d->fragsize
-				   && !d->endcleared) {
-                          /* XXXKW what is this for? */
-				clear_advance(d->dma_buf,
-					      d->sbufsz,
-					      d->swptr,
-					      d->fragsize,
-					      0);
-				d->endcleared = 1;
-			}
-			if ( (d->count <= (signed) d->sbufsz/2) || intflag)
-			{
-                                CS_DBGOUT(CS_WAVE_WRITE, 4,
-                                          printk(KERN_INFO
-                                                 "cs4297a: update count -> %d\n", d->count));
-				wake_up(&d->wait);
-			}
-		}
-		CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
-			"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
-				(unsigned) s, d->hwptr, 
-				d->total_bytes, d->count));
-	}
-}
-
-static int mixer_ioctl(struct cs4297a_state *s, unsigned int cmd,
-		       unsigned long arg)
-{
-	// Index to mixer_src[] is value of AC97 Input Mux Select Reg.
-	// Value of array member is recording source Device ID Mask.
-	static const unsigned int mixer_src[8] = {
-		SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1,
-		SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0
-	};
-
-	// Index of mixtable1[] member is Device ID 
-	// and must be <= SOUND_MIXER_NRDEVICES.
-	// Value of array member is index into s->mix.vol[]
-	static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
-		[SOUND_MIXER_PCM] = 1,	// voice 
-		[SOUND_MIXER_LINE1] = 2,	// AUX
-		[SOUND_MIXER_CD] = 3,	// CD 
-		[SOUND_MIXER_LINE] = 4,	// Line 
-		[SOUND_MIXER_SYNTH] = 5,	// FM
-		[SOUND_MIXER_MIC] = 6,	// Mic 
-		[SOUND_MIXER_SPEAKER] = 7,	// Speaker 
-		[SOUND_MIXER_RECLEV] = 8,	// Recording level 
-		[SOUND_MIXER_VOLUME] = 9	// Master Volume 
-	};
-
-	static const unsigned mixreg[] = {
-		AC97_PCMOUT_VOL,
-		AC97_AUX_VOL,
-		AC97_CD_VOL,
-		AC97_LINEIN_VOL
-	};
-	unsigned char l, r, rl, rr, vidx;
-	unsigned char attentbl[11] =
-	    { 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 };
-	unsigned temp1;
-	int i, val;
-
-	VALIDATE_STATE(s);
-	CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO
-		 "cs4297a: mixer_ioctl(): s=0x%.8x cmd=0x%.8x\n",
-			 (unsigned) s, cmd));
-#if CSDEBUG
-	cs_printioctl(cmd);
-#endif
-#if CSDEBUG_INTERFACE
-
-	if ((cmd == SOUND_MIXER_CS_GETDBGMASK) ||
-	    (cmd == SOUND_MIXER_CS_SETDBGMASK) ||
-	    (cmd == SOUND_MIXER_CS_GETDBGLEVEL) ||
-	    (cmd == SOUND_MIXER_CS_SETDBGLEVEL))
-	{
-		switch (cmd) {
-
-		case SOUND_MIXER_CS_GETDBGMASK:
-			return put_user(cs_debugmask,
-					(unsigned long *) arg);
-
-		case SOUND_MIXER_CS_GETDBGLEVEL:
-			return put_user(cs_debuglevel,
-					(unsigned long *) arg);
-
-		case SOUND_MIXER_CS_SETDBGMASK:
-			if (get_user(val, (unsigned long *) arg))
-				return -EFAULT;
-			cs_debugmask = val;
-			return 0;
-
-		case SOUND_MIXER_CS_SETDBGLEVEL:
-			if (get_user(val, (unsigned long *) arg))
-				return -EFAULT;
-			cs_debuglevel = val;
-			return 0;
-		default:
-			CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
-				"cs4297a: mixer_ioctl(): ERROR unknown debug cmd\n"));
-			return 0;
-		}
-	}
-#endif
-
-	if (cmd == SOUND_MIXER_PRIVATE1) {
-                return -EINVAL;
-	}
-	if (cmd == SOUND_MIXER_PRIVATE2) {
-		// enable/disable/query spatializer 
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		if (val != -1) {
-			temp1 = (val & 0x3f) >> 2;
-			cs4297a_write_ac97(s, AC97_3D_CONTROL, temp1);
-			cs4297a_read_ac97(s, AC97_GENERAL_PURPOSE,
-					 &temp1);
-			cs4297a_write_ac97(s, AC97_GENERAL_PURPOSE,
-					  temp1 | 0x2000);
-		}
-		cs4297a_read_ac97(s, AC97_3D_CONTROL, &temp1);
-		return put_user((temp1 << 2) | 3, (int *) arg);
-	}
-	if (cmd == SOUND_MIXER_INFO) {
-		mixer_info info;
-		memset(&info, 0, sizeof(info));
-		strlcpy(info.id, "CS4297a", sizeof(info.id));
-		strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
-		info.modify_counter = s->mix.modcnt;
-		if (copy_to_user((void *) arg, &info, sizeof(info)))
-			return -EFAULT;
-		return 0;
-	}
-	if (cmd == SOUND_OLD_MIXER_INFO) {
-		_old_mixer_info info;
-		memset(&info, 0, sizeof(info));
-		strlcpy(info.id, "CS4297a", sizeof(info.id));
-		strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
-		if (copy_to_user((void *) arg, &info, sizeof(info)))
-			return -EFAULT;
-		return 0;
-	}
-	if (cmd == OSS_GETVERSION)
-		return put_user(SOUND_VERSION, (int *) arg);
-
-	if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
-		return -EINVAL;
-
-	// If ioctl has only the SIOC_READ bit(bit 31)
-	// on, process the only-read commands. 
-	if (_SIOC_DIR(cmd) == _SIOC_READ) {
-		switch (_IOC_NR(cmd)) {
-		case SOUND_MIXER_RECSRC:	// Arg contains a bit for each recording source 
-			cs4297a_read_ac97(s, AC97_RECORD_SELECT,
-					 &temp1);
-			return put_user(mixer_src[temp1 & 7], (int *) arg);
-
-		case SOUND_MIXER_DEVMASK:	// Arg contains a bit for each supported device 
-			return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
-					SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
-                                        (int *) arg);
-
-		case SOUND_MIXER_RECMASK:	// Arg contains a bit for each supported recording source 
-			return put_user(SOUND_MASK_LINE | SOUND_MASK_VOLUME,
-                                        (int *) arg);
-
-		case SOUND_MIXER_STEREODEVS:	// Mixer channels supporting stereo 
-			return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
-					SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
-                                        (int *) arg);
-
-		case SOUND_MIXER_CAPS:
-			return put_user(SOUND_CAP_EXCL_INPUT, (int *) arg);
-
-		default:
-			i = _IOC_NR(cmd);
-			if (i >= SOUND_MIXER_NRDEVICES
-			    || !(vidx = mixtable1[i]))
-				return -EINVAL;
-			return put_user(s->mix.vol[vidx - 1], (int *) arg);
-		}
-	}
-	// If ioctl doesn't have both the SIOC_READ and 
-	// the SIOC_WRITE bit set, return invalid.
-	if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE))
-		return -EINVAL;
-
-	// Increment the count of volume writes.
-	s->mix.modcnt++;
-
-	// Isolate the command; it must be a write.
-	switch (_IOC_NR(cmd)) {
-
-	case SOUND_MIXER_RECSRC:	// Arg contains a bit for each recording source 
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		i = hweight32(val);	// i = # bits on in val.
-		if (i != 1)	// One & only 1 bit must be on.
-			return 0;
-		for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) {
-			if (val == mixer_src[i]) {
-				temp1 = (i << 8) | i;
-				cs4297a_write_ac97(s,
-						  AC97_RECORD_SELECT,
-						  temp1);
-				return 0;
-			}
-		}
-		return 0;
-
-	case SOUND_MIXER_VOLUME:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;	// Max soundcard.h vol is 100.
-		if (l < 6) {
-			rl = 63;
-			l = 0;
-		} else
-			rl = attentbl[(10 * l) / 100];	// Convert 0-100 vol to 63-0 atten.
-
-		r = (val >> 8) & 0xff;
-		if (r > 100)
-			r = 100;	// Max right volume is 100, too
-		if (r < 6) {
-			rr = 63;
-			r = 0;
-		} else
-			rr = attentbl[(10 * r) / 100];	// Convert volume to attenuation.
-
-		if ((rl > 60) && (rr > 60))	// If both l & r are 'low',          
-			temp1 = 0x8000;	//  turn on the mute bit.
-		else
-			temp1 = 0;
-
-		temp1 |= (rl << 8) | rr;
-
-		cs4297a_write_ac97(s, AC97_MASTER_VOL_STEREO, temp1);
-		cs4297a_write_ac97(s, AC97_PHONE_VOL, temp1);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[8] = ((unsigned int) r << 8) | l;
-#else
-		s->mix.vol[8] = val;
-#endif
-		return put_user(s->mix.vol[8], (int *) arg);
-
-	case SOUND_MIXER_SPEAKER:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;
-		if (l < 3) {
-			rl = 0;
-			l = 0;
-		} else {
-			rl = (l * 2 - 5) / 13;	// Convert 0-100 range to 0-15.
-			l = (rl * 13 + 5) / 2;
-		}
-
-		if (rl < 3) {
-			temp1 = 0x8000;
-			rl = 0;
-		} else
-			temp1 = 0;
-		rl = 15 - rl;	// Convert volume to attenuation.
-		temp1 |= rl << 1;
-		cs4297a_write_ac97(s, AC97_PCBEEP_VOL, temp1);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[6] = l << 8;
-#else
-		s->mix.vol[6] = val;
-#endif
-		return put_user(s->mix.vol[6], (int *) arg);
-
-	case SOUND_MIXER_RECLEV:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;
-		r = (val >> 8) & 0xff;
-		if (r > 100)
-			r = 100;
-		rl = (l * 2 - 5) / 13;	// Convert 0-100 scale to 0-15.
-		rr = (r * 2 - 5) / 13;
-		if (rl < 3 && rr < 3)
-			temp1 = 0x8000;
-		else
-			temp1 = 0;
-
-		temp1 = temp1 | (rl << 8) | rr;
-		cs4297a_write_ac97(s, AC97_RECORD_GAIN, temp1);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[7] = ((unsigned int) r << 8) | l;
-#else
-		s->mix.vol[7] = val;
-#endif
-		return put_user(s->mix.vol[7], (int *) arg);
-
-	case SOUND_MIXER_MIC:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;
-		if (l < 1) {
-			l = 0;
-			rl = 0;
-		} else {
-			rl = ((unsigned) l * 5 - 4) / 16;	// Convert 0-100 range to 0-31.
-			l = (rl * 16 + 4) / 5;
-		}
-		cs4297a_read_ac97(s, AC97_MIC_VOL, &temp1);
-		temp1 &= 0x40;	// Isolate 20db gain bit.
-		if (rl < 3) {
-			temp1 |= 0x8000;
-			rl = 0;
-		}
-		rl = 31 - rl;	// Convert volume to attenuation.
-		temp1 |= rl;
-		cs4297a_write_ac97(s, AC97_MIC_VOL, temp1);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[5] = val << 8;
-#else
-		s->mix.vol[5] = val;
-#endif
-		return put_user(s->mix.vol[5], (int *) arg);
-
-
-	case SOUND_MIXER_SYNTH:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		r = (val >> 8) & 0xff;
-		if (r > 100)
-			r = 100;
-		rl = (l * 2 - 11) / 3;	// Convert 0-100 range to 0-63.
-		rr = (r * 2 - 11) / 3;
-		if (rl < 3)	// If l is low, turn on
-			temp1 = 0x0080;	//  the mute bit.
-		else
-			temp1 = 0;
-
-		rl = 63 - rl;	// Convert vol to attenuation.
-//		writel(temp1 | rl, s->pBA0 + FMLVC);
-		if (rr < 3)	//  If rr is low, turn on
-			temp1 = 0x0080;	//   the mute bit.
-		else
-			temp1 = 0;
-		rr = 63 - rr;	// Convert vol to attenuation.
-//		writel(temp1 | rr, s->pBA0 + FMRVC);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[4] = (r << 8) | l;
-#else
-		s->mix.vol[4] = val;
-#endif
-		return put_user(s->mix.vol[4], (int *) arg);
-
-
-	default:
-		CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
-			"cs4297a: mixer_ioctl(): default\n"));
-
-		i = _IOC_NR(cmd);
-		if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i]))
-			return -EINVAL;
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		l = val & 0xff;
-		if (l > 100)
-			l = 100;
-		if (l < 1) {
-			l = 0;
-			rl = 31;
-		} else
-			rl = (attentbl[(l * 10) / 100]) >> 1;
-
-		r = (val >> 8) & 0xff;
-		if (r > 100)
-			r = 100;
-		if (r < 1) {
-			r = 0;
-			rr = 31;
-		} else
-			rr = (attentbl[(r * 10) / 100]) >> 1;
-		if ((rl > 30) && (rr > 30))
-			temp1 = 0x8000;
-		else
-			temp1 = 0;
-		temp1 = temp1 | (rl << 8) | rr;
-		cs4297a_write_ac97(s, mixreg[vidx - 1], temp1);
-
-#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
-		s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l;
-#else
-		s->mix.vol[vidx - 1] = val;
-#endif
-		return put_user(s->mix.vol[vidx - 1], (int *) arg);
-	}
-}
-
-
-// --------------------------------------------------------------------- 
-
-static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	struct cs4297a_state *s=NULL;
-	struct list_head *entry;
-
-	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
-		  printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()+\n"));
-
-	mutex_lock(&swarm_cs4297a_mutex);
-	list_for_each(entry, &cs4297a_devs)
-	{
-		s = list_entry(entry, struct cs4297a_state, list);
-		if(s->dev_mixer == minor)
-			break;
-	}
-	if (!s)
-	{
-		CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2,
-			printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- -ENODEV\n"));
-
-		mutex_unlock(&swarm_cs4297a_mutex);
-		return -ENODEV;
-	}
-	VALIDATE_STATE(s);
-	file->private_data = s;
-
-	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
-		  printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- 0\n"));
-	mutex_unlock(&swarm_cs4297a_mutex);
-
-	return nonseekable_open(inode, file);
-}
-
-
-static int cs4297a_release_mixdev(struct inode *inode, struct file *file)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-
-	VALIDATE_STATE(s);
-	return 0;
-}
-
-
-static int cs4297a_ioctl_mixdev(struct file *file,
-			       unsigned int cmd, unsigned long arg)
-{
-	int ret;
-	mutex_lock(&swarm_cs4297a_mutex);
-	ret = mixer_ioctl((struct cs4297a_state *) file->private_data, cmd,
-			   arg);
-	mutex_unlock(&swarm_cs4297a_mutex);
-	return ret;
-}
-
-
-// ******************************************************************************************
-//   Mixer file operations struct.
-// ******************************************************************************************
-static const struct file_operations cs4297a_mixer_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.unlocked_ioctl	= cs4297a_ioctl_mixdev,
-	.open		= cs4297a_open_mixdev,
-	.release	= cs4297a_release_mixdev,
-};
-
-// --------------------------------------------------------------------- 
-
-
-static int drain_adc(struct cs4297a_state *s, int nonblock)
-{
-        /* This routine serves no purpose currently - any samples
-           sitting in the receive queue will just be processed by the
-           background consumer.  This would be different if DMA
-           actually stopped when there were no clients. */
-	return 0;
-}
-
-static int drain_dac(struct cs4297a_state *s, int nonblock)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long flags;
-        unsigned hwptr;
-	unsigned tmo;
-	int count;
-
-	if (s->dma_dac.mapped)
-		return 0;
-        if (nonblock)
-                return -EBUSY;
-	add_wait_queue(&s->dma_dac.wait, &wait);
-        while ((count = __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) ||
-               (s->dma_dac.count > 0)) {
-                if (!signal_pending(current)) {
-                        set_current_state(TASK_INTERRUPTIBLE);
-                        /* XXXKW is this calculation working? */
-                        tmo = ((count * FRAME_TX_US) * HZ) / 1000000;
-                        schedule_timeout(tmo + 1);
-                } else {
-                        /* XXXKW do I care if there is a signal pending? */
-                }
-        }
-        spin_lock_irqsave(&s->lock, flags);
-        /* Reset the bookkeeping */
-        hwptr = (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
-                       s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
-        s->dma_dac.hwptr = s->dma_dac.swptr = hwptr;
-        spin_unlock_irqrestore(&s->lock, flags);
-	remove_wait_queue(&s->dma_dac.wait, &wait);
-	__set_current_state(TASK_RUNNING);
-	return 0;
-}
-
-
-// --------------------------------------------------------------------- 
-
-static ssize_t cs4297a_read(struct file *file, char *buffer, size_t count,
-			   loff_t * ppos)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-	ssize_t ret;
-	unsigned long flags;
-	int cnt, count_fr, cnt_by;
-	unsigned copied = 0;
-
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
-		  printk(KERN_INFO "cs4297a: cs4297a_read()+ %d \n", count));
-
-	VALIDATE_STATE(s);
-	if (s->dma_adc.mapped)
-		return -ENXIO;
-	if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
-		return ret;
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-	ret = 0;
-//
-// "count" is the amount of bytes to read (from app), is decremented each loop
-//      by the amount of bytes that have been returned to the user buffer.
-// "cnt" is the running total of each read from the buffer (changes each loop)
-// "buffer" points to the app's buffer
-// "ret" keeps a running total of the amount of bytes that have been copied
-//      to the user buffer.
-// "copied" is the total bytes copied into the user buffer for each loop.
-//
-	while (count > 0) {
-		CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
-			"_read() count>0 count=%d .count=%d .swptr=%d .hwptr=%d \n",
-				count, s->dma_adc.count,
-				s->dma_adc.swptr, s->dma_adc.hwptr));
-		spin_lock_irqsave(&s->lock, flags);
-
-                /* cnt will be the number of available samples (16-bit
-                   stereo); it starts out as the maxmimum consequetive
-                   samples */
-		cnt = (s->dma_adc.sb_end - s->dma_adc.sb_swptr) / 2;
-                count_fr = s->dma_adc.count / FRAME_SAMPLE_BYTES;
-
-		// dma_adc.count is the current total bytes that have not been read.
-		// if the amount of unread bytes from the current sw pointer to the
-		// end of the buffer is greater than the current total bytes that
-		// have not been read, then set the "cnt" (unread bytes) to the
-		// amount of unread bytes.  
-
-		if (count_fr < cnt)
-			cnt = count_fr;
-                cnt_by = cnt * FRAME_SAMPLE_BYTES;
-		spin_unlock_irqrestore(&s->lock, flags);
-		//
-		// if we are converting from 8/16 then we need to copy
-		// twice the number of 16 bit bytes then 8 bit bytes.
-		// 
-		if (s->conversion) {
-			if (cnt_by > (count * 2)) {
-				cnt = (count * 2) / FRAME_SAMPLE_BYTES;
-                                cnt_by = count * 2;
-                        }
-		} else {
-			if (cnt_by > count) {
-				cnt = count / FRAME_SAMPLE_BYTES;
-                                cnt_by = count;
-                        }
-		}
-		//
-		// "cnt" NOW is the smaller of the amount that will be read,
-		// and the amount that is requested in this read (or partial).
-		// if there are no bytes in the buffer to read, then start the
-		// ADC and wait for the interrupt handler to wake us up.
-		//
-		if (cnt <= 0) {
-
-			// start up the dma engine and then continue back to the top of
-			// the loop when wake up occurs.
-			start_adc(s);
-			if (file->f_flags & O_NONBLOCK)
-				return ret ? ret : -EAGAIN;
-			oss_broken_sleep_on(&s->dma_adc.wait, MAX_SCHEDULE_TIMEOUT);
-			if (signal_pending(current))
-				return ret ? ret : -ERESTARTSYS;
-			continue;
-		}
-		// there are bytes in the buffer to read.
-		// copy from the hw buffer over to the user buffer.
-		// user buffer is designated by "buffer"
-		// virtual address to copy from is dma_buf+swptr
-		// the "cnt" is the number of bytes to read.
-
-		CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO
-			"_read() copy_to cnt=%d count=%d ", cnt_by, count));
-		CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
-			 " .sbufsz=%d .count=%d buffer=0x%.8x ret=%d\n",
-				 s->dma_adc.sbufsz, s->dma_adc.count,
-				 (unsigned) buffer, ret));
-
-		if (copy_to_user (buffer, ((void *)s->dma_adc.sb_swptr), cnt_by))
-			return ret ? ret : -EFAULT;
-                copied = cnt_by;
-
-                /* Return the descriptors */
-		spin_lock_irqsave(&s->lock, flags);
-                CS_DBGOUT(CS_FUNCTION, 2, 
-                          printk(KERN_INFO "cs4297a: upd_rcv sw->hw %x/%x\n", s->dma_adc.swptr, s->dma_adc.hwptr));
-		s->dma_adc.count -= cnt_by;
-                s->dma_adc.sb_swptr += cnt * 2;
-                if (s->dma_adc.sb_swptr == s->dma_adc.sb_end)
-                        s->dma_adc.sb_swptr = s->dma_adc.sample_buf;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= copied;
-		buffer += copied;
-		ret += copied;
-		start_adc(s);
-	}
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
-		  printk(KERN_INFO "cs4297a: cs4297a_read()- %d\n", ret));
-	return ret;
-}
-
-
-static ssize_t cs4297a_write(struct file *file, const char *buffer,
-			    size_t count, loff_t * ppos)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-	ssize_t ret;
-	unsigned long flags;
-	unsigned swptr, hwptr;
-	int cnt;
-
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
-		  printk(KERN_INFO "cs4297a: cs4297a_write()+ count=%d\n",
-			 count));
-	VALIDATE_STATE(s);
-
-	if (s->dma_dac.mapped)
-		return -ENXIO;
-	if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s)))
-		return ret;
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	ret = 0;
-	while (count > 0) {
-                serdma_t *d = &s->dma_dac;
-                int copy_cnt;
-                u32 *s_tmpl;
-                u32 *t_tmpl;
-                u32 left, right;
-                int swap = (s->prop_dac.fmt == AFMT_S16_LE) || (s->prop_dac.fmt == AFMT_U16_LE);
-                
-                /* XXXXXX this is broken for BLOAT_FACTOR */
-		spin_lock_irqsave(&s->lock, flags);
-		if (d->count < 0) {
-			d->count = 0;
-			d->swptr = d->hwptr;
-		}
-		if (d->underrun) {
-			d->underrun = 0;
-                        hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
-                                             d->descrtab_phys) / sizeof(serdma_descr_t));
-			d->swptr = d->hwptr = hwptr;
-		}
-		swptr = d->swptr;
-		cnt = d->sbufsz - (swptr * FRAME_SAMPLE_BYTES);
-                /* Will this write fill up the buffer? */
-		if (d->count + cnt > d->sbufsz)
-			cnt = d->sbufsz - d->count;
-		spin_unlock_irqrestore(&s->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			start_dac(s);
-			if (file->f_flags & O_NONBLOCK)
-				return ret ? ret : -EAGAIN;
-			oss_broken_sleep_on(&d->wait, MAX_SCHEDULE_TIMEOUT);
-			if (signal_pending(current))
-				return ret ? ret : -ERESTARTSYS;
-			continue;
-		}
-		if (copy_from_user(d->sample_buf, buffer, cnt))
-			return ret ? ret : -EFAULT;
-
-                copy_cnt = cnt;
-                s_tmpl = (u32 *)d->sample_buf;
-                t_tmpl = (u32 *)(d->dma_buf + (swptr * 4));
-
-                /* XXXKW assuming 16-bit stereo! */
-                do {
-			u32 tmp;
-
-			t_tmpl[0] = cpu_to_be32(0x98000000);
-
-			tmp = be32_to_cpu(s_tmpl[0]);
-			left = tmp & 0xffff;
-			right = tmp >> 16;
-			if (swap) {
-				left = swab16(left);
-				right = swab16(right);
-			}
-			t_tmpl[1] = cpu_to_be32(left >> 8);
-			t_tmpl[2] = cpu_to_be32(((left & 0xff) << 24) |
-						(right << 4));
-
-                        s_tmpl++;
-                        t_tmpl += 8;
-                        copy_cnt -= 4;
-                } while (copy_cnt);
-
-                /* Mux in any pending read/write accesses */
-                if (s->reg_request) {
-			*(u64 *)(d->dma_buf + (swptr * 4)) |=
-				cpu_to_be64(s->reg_request);
-                        s->reg_request = 0;
-                        wake_up(&s->dma_dac.reg_wait);
-                }
-
-                CS_DBGOUT(CS_WAVE_WRITE, 4,
-                          printk(KERN_INFO
-                                 "cs4297a: copy in %d to swptr %x\n", cnt, swptr));
-
-		swptr = (swptr + (cnt/FRAME_SAMPLE_BYTES)) % d->ringsz;
-                __raw_writeq(cnt/FRAME_SAMPLE_BYTES, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
-		spin_lock_irqsave(&s->lock, flags);
-		d->swptr = swptr;
-		d->count += cnt;
-		d->endcleared = 0;
-		spin_unlock_irqrestore(&s->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		start_dac(s);
-	}
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
-		  printk(KERN_INFO "cs4297a: cs4297a_write()- %d\n", ret));
-	return ret;
-}
-
-
-static unsigned int cs4297a_poll(struct file *file,
-				struct poll_table_struct *wait)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
-		  printk(KERN_INFO "cs4297a: cs4297a_poll()+\n"));
-	VALIDATE_STATE(s);
-	if (file->f_mode & FMODE_WRITE) {
-		CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
-			  printk(KERN_INFO
-				 "cs4297a: cs4297a_poll() wait on FMODE_WRITE\n"));
-		if(!s->dma_dac.ready && prog_dmabuf_dac(s))
-			return 0;
-		poll_wait(file, &s->dma_dac.wait, wait);
-	}
-	if (file->f_mode & FMODE_READ) {
-		CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
-			  printk(KERN_INFO
-				 "cs4297a: cs4297a_poll() wait on FMODE_READ\n"));
-		if(!s->dma_dac.ready && prog_dmabuf_adc(s))
-			return 0;
-		poll_wait(file, &s->dma_adc.wait, wait);
-	}
-	spin_lock_irqsave(&s->lock, flags);
-	cs4297a_update_ptr(s,CS_FALSE);
-	if (file->f_mode & FMODE_WRITE) {
-		if (s->dma_dac.mapped) {
-			if (s->dma_dac.count >=
-			    (signed) s->dma_dac.fragsize) {
-				if (s->dma_dac.wakeup)
-					mask |= POLLOUT | POLLWRNORM;
-				else
-					mask = 0;
-				s->dma_dac.wakeup = 0;
-			}
-		} else {
-			if ((signed) (s->dma_dac.sbufsz/2) >= s->dma_dac.count)
-				mask |= POLLOUT | POLLWRNORM;
-		}
-	} else if (file->f_mode & FMODE_READ) {
-		if (s->dma_adc.mapped) {
-			if (s->dma_adc.count >= (signed) s->dma_adc.fragsize) 
-				mask |= POLLIN | POLLRDNORM;
-		} else {
-			if (s->dma_adc.count > 0)
-				mask |= POLLIN | POLLRDNORM;
-		}
-	}
-	spin_unlock_irqrestore(&s->lock, flags);
-	CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
-		  printk(KERN_INFO "cs4297a: cs4297a_poll()- 0x%.8x\n",
-			 mask));
-	return mask;
-}
-
-
-static int cs4297a_mmap(struct file *file, struct vm_area_struct *vma)
-{
-        /* XXXKW currently no mmap support */
-        return -EINVAL;
-	return 0;
-}
-
-
-static int cs4297a_ioctl(struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-	unsigned long flags;
-	audio_buf_info abinfo;
-	count_info cinfo;
-	int val, mapped, ret;
-
-	CS_DBGOUT(CS_FUNCTION|CS_IOCTL, 4, printk(KERN_INFO
-		 "cs4297a: cs4297a_ioctl(): file=0x%.8x cmd=0x%.8x\n",
-			 (unsigned) file, cmd));
-#if CSDEBUG
-	cs_printioctl(cmd);
-#endif
-	VALIDATE_STATE(s);
-	mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) ||
-	    ((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
-	switch (cmd) {
-	case OSS_GETVERSION:
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			"cs4297a: cs4297a_ioctl(): SOUND_VERSION=0x%.8x\n",
-				 SOUND_VERSION));
-		return put_user(SOUND_VERSION, (int *) arg);
-
-	case SNDCTL_DSP_SYNC:
-		CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_SYNC\n"));
-		if (file->f_mode & FMODE_WRITE)
-			return drain_dac(s,
-					 0 /*file->f_flags & O_NONBLOCK */
-					 );
-		return 0;
-
-	case SNDCTL_DSP_SETDUPLEX:
-		return 0;
-
-	case SNDCTL_DSP_GETCAPS:
-		return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME |
-				DSP_CAP_TRIGGER | DSP_CAP_MMAP,
-				(int *) arg);
-
-	case SNDCTL_DSP_RESET:
-		CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_RESET\n"));
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac(s);
-			synchronize_irq(s->irq);
-                        s->dma_dac.count = s->dma_dac.total_bytes =
-                                s->dma_dac.blocks = s->dma_dac.wakeup = 0;
-			s->dma_dac.swptr = s->dma_dac.hwptr =
-                                (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
-                                       s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
-		}
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(s);
-			synchronize_irq(s->irq);
-                        s->dma_adc.count = s->dma_adc.total_bytes =
-                                s->dma_adc.blocks = s->dma_dac.wakeup = 0;
-			s->dma_adc.swptr = s->dma_adc.hwptr =
-                                (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
-                                       s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
-		}
-		return 0;
-
-	case SNDCTL_DSP_SPEED:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_SPEED val=%d -> 48000\n", val));
-                val = 48000;
-                return put_user(val, (int *) arg);
-
-	case SNDCTL_DSP_STEREO:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_STEREO val=%d\n", val));
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(s);
-			s->dma_adc.ready = 0;
-			s->prop_adc.channels = val ? 2 : 1;
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac(s);
-			s->dma_dac.ready = 0;
-			s->prop_dac.channels = val ? 2 : 1;
-		}
-		return 0;
-
-	case SNDCTL_DSP_CHANNELS:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_CHANNELS val=%d\n",
-				 val));
-		if (val != 0) {
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(s);
-				s->dma_adc.ready = 0;
-				if (val >= 2)
-					s->prop_adc.channels = 2;
-				else
-					s->prop_adc.channels = 1;
-			}
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac(s);
-				s->dma_dac.ready = 0;
-				if (val >= 2)
-					s->prop_dac.channels = 2;
-				else
-					s->prop_dac.channels = 1;
-			}
-		}
-
-		if (file->f_mode & FMODE_WRITE)
-			val = s->prop_dac.channels;
-		else if (file->f_mode & FMODE_READ)
-			val = s->prop_adc.channels;
-
-		return put_user(val, (int *) arg);
-
-	case SNDCTL_DSP_GETFMTS:	// Returns a mask 
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			"cs4297a: cs4297a_ioctl(): DSP_GETFMT val=0x%.8x\n",
-				 AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
-				 AFMT_U8));
-		return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
-				AFMT_U8, (int *) arg);
-
-	case SNDCTL_DSP_SETFMT:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_SETFMT val=0x%.8x\n",
-				 val));
-		if (val != AFMT_QUERY) {
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(s);
-				s->dma_adc.ready = 0;
-				if (val != AFMT_S16_LE
-				    && val != AFMT_U16_LE && val != AFMT_S8
-				    && val != AFMT_U8)
-					val = AFMT_U8;
-				s->prop_adc.fmt = val;
-				s->prop_adc.fmt_original = s->prop_adc.fmt;
-			}
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac(s);
-				s->dma_dac.ready = 0;
-				if (val != AFMT_S16_LE
-				    && val != AFMT_U16_LE && val != AFMT_S8
-				    && val != AFMT_U8)
-					val = AFMT_U8;
-				s->prop_dac.fmt = val;
-				s->prop_dac.fmt_original = s->prop_dac.fmt;
-			}
-		} else {
-			if (file->f_mode & FMODE_WRITE)
-				val = s->prop_dac.fmt_original;
-			else if (file->f_mode & FMODE_READ)
-				val = s->prop_adc.fmt_original;
-		}
-		CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
-		  "cs4297a: cs4297a_ioctl(): DSP_SETFMT return val=0x%.8x\n", 
-			val));
-		return put_user(val, (int *) arg);
-
-	case SNDCTL_DSP_POST:
-		CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
-			 "cs4297a: cs4297a_ioctl(): DSP_POST\n"));
-		return 0;
-
-	case SNDCTL_DSP_GETTRIGGER:
-		val = 0;
-		if (file->f_mode & s->ena & FMODE_READ)
-			val |= PCM_ENABLE_INPUT;
-		if (file->f_mode & s->ena & FMODE_WRITE)
-			val |= PCM_ENABLE_OUTPUT;
-		return put_user(val, (int *) arg);
-
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		if (file->f_mode & FMODE_READ) {
-			if (val & PCM_ENABLE_INPUT) {
-				if (!s->dma_adc.ready
-				    && (ret = prog_dmabuf_adc(s)))
-					return ret;
-				start_adc(s);
-			} else
-				stop_adc(s);
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			if (val & PCM_ENABLE_OUTPUT) {
-				if (!s->dma_dac.ready
-				    && (ret = prog_dmabuf_dac(s)))
-					return ret;
-				start_dac(s);
-			} else
-				stop_dac(s);
-		}
-		return 0;
-
-	case SNDCTL_DSP_GETOSPACE:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s)))
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		cs4297a_update_ptr(s,CS_FALSE);
-		abinfo.fragsize = s->dma_dac.fragsize;
-		if (s->dma_dac.mapped)
-			abinfo.bytes = s->dma_dac.sbufsz;
-		else
-			abinfo.bytes =
-			    s->dma_dac.sbufsz - s->dma_dac.count;
-		abinfo.fragstotal = s->dma_dac.numfrag;
-		abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
-		CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO
-			"cs4297a: cs4297a_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n",
-				abinfo.fragsize,abinfo.bytes,abinfo.fragstotal,
-				abinfo.fragments));
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user((void *) arg, &abinfo,
-				    sizeof(abinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_GETISPACE:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)))
-			return val;
-		spin_lock_irqsave(&s->lock, flags);
-		cs4297a_update_ptr(s,CS_FALSE);
-		if (s->conversion) {
-			abinfo.fragsize = s->dma_adc.fragsize / 2;
-			abinfo.bytes = s->dma_adc.count / 2;
-			abinfo.fragstotal = s->dma_adc.numfrag;
-			abinfo.fragments =
-			    abinfo.bytes >> (s->dma_adc.fragshift - 1);
-		} else {
-			abinfo.fragsize = s->dma_adc.fragsize;
-			abinfo.bytes = s->dma_adc.count;
-			abinfo.fragstotal = s->dma_adc.numfrag;
-			abinfo.fragments =
-			    abinfo.bytes >> s->dma_adc.fragshift;
-		}
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user((void *) arg, &abinfo,
-				    sizeof(abinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_NONBLOCK:
-		spin_lock(&file->f_lock);
-		file->f_flags |= O_NONBLOCK;
-		spin_unlock(&file->f_lock);
-		return 0;
-
-	case SNDCTL_DSP_GETODELAY:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if(!s->dma_dac.ready && prog_dmabuf_dac(s))
-			return 0;
-		spin_lock_irqsave(&s->lock, flags);
-		cs4297a_update_ptr(s,CS_FALSE);
-		val = s->dma_dac.count;
-		spin_unlock_irqrestore(&s->lock, flags);
-		return put_user(val, (int *) arg);
-
-	case SNDCTL_DSP_GETIPTR:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if(!s->dma_adc.ready && prog_dmabuf_adc(s))
-			return 0;
-		spin_lock_irqsave(&s->lock, flags);
-		cs4297a_update_ptr(s,CS_FALSE);
-		cinfo.bytes = s->dma_adc.total_bytes;
-		if (s->dma_adc.mapped) {
-			cinfo.blocks =
-			    (cinfo.bytes >> s->dma_adc.fragshift) -
-			    s->dma_adc.blocks;
-			s->dma_adc.blocks =
-			    cinfo.bytes >> s->dma_adc.fragshift;
-		} else {
-			if (s->conversion) {
-				cinfo.blocks =
-				    s->dma_adc.count /
-				    2 >> (s->dma_adc.fragshift - 1);
-			} else
-				cinfo.blocks =
-				    s->dma_adc.count >> s->dma_adc.
-				    fragshift;
-		}
-		if (s->conversion)
-			cinfo.ptr = s->dma_adc.hwptr / 2;
-		else
-			cinfo.ptr = s->dma_adc.hwptr;
-		if (s->dma_adc.mapped)
-			s->dma_adc.count &= s->dma_adc.fragsize - 1;
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_GETOPTR:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if(!s->dma_dac.ready && prog_dmabuf_dac(s))
-			return 0;
-		spin_lock_irqsave(&s->lock, flags);
-		cs4297a_update_ptr(s,CS_FALSE);
-		cinfo.bytes = s->dma_dac.total_bytes;
-		if (s->dma_dac.mapped) {
-			cinfo.blocks =
-			    (cinfo.bytes >> s->dma_dac.fragshift) -
-			    s->dma_dac.blocks;
-			s->dma_dac.blocks =
-			    cinfo.bytes >> s->dma_dac.fragshift;
-		} else {
-			cinfo.blocks =
-			    s->dma_dac.count >> s->dma_dac.fragshift;
-		}
-		cinfo.ptr = s->dma_dac.hwptr;
-		if (s->dma_dac.mapped)
-			s->dma_dac.count &= s->dma_dac.fragsize - 1;
-		spin_unlock_irqrestore(&s->lock, flags);
-		return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
-
-	case SNDCTL_DSP_GETBLKSIZE:
-		if (file->f_mode & FMODE_WRITE) {
-			if ((val = prog_dmabuf_dac(s)))
-				return val;
-			return put_user(s->dma_dac.fragsize, (int *) arg);
-		}
-		if ((val = prog_dmabuf_adc(s)))
-			return val;
-		if (s->conversion)
-			return put_user(s->dma_adc.fragsize / 2,
-					(int *) arg);
-		else
-			return put_user(s->dma_adc.fragsize, (int *) arg);
-
-	case SNDCTL_DSP_SETFRAGMENT:
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		return 0;	// Say OK, but do nothing.
-
-	case SNDCTL_DSP_SUBDIVIDE:
-		if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision)
-		    || (file->f_mode & FMODE_WRITE
-			&& s->dma_dac.subdivision)) return -EINVAL;
-		if (get_user(val, (int *) arg))
-			return -EFAULT;
-		if (val != 1 && val != 2 && val != 4)
-			return -EINVAL;
-		if (file->f_mode & FMODE_READ)
-			s->dma_adc.subdivision = val;
-		else if (file->f_mode & FMODE_WRITE)
-			s->dma_dac.subdivision = val;
-		return 0;
-
-	case SOUND_PCM_READ_RATE:
-		if (file->f_mode & FMODE_READ)
-			return put_user(s->prop_adc.rate, (int *) arg);
-		else if (file->f_mode & FMODE_WRITE)
-			return put_user(s->prop_dac.rate, (int *) arg);
-
-	case SOUND_PCM_READ_CHANNELS:
-		if (file->f_mode & FMODE_READ)
-			return put_user(s->prop_adc.channels, (int *) arg);
-		else if (file->f_mode & FMODE_WRITE)
-			return put_user(s->prop_dac.channels, (int *) arg);
-
-	case SOUND_PCM_READ_BITS:
-		if (file->f_mode & FMODE_READ)
-			return
-			    put_user(
-				     (s->prop_adc.
-				      fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
-				     (int *) arg);
-		else if (file->f_mode & FMODE_WRITE)
-			return
-			    put_user(
-				     (s->prop_dac.
-				      fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
-				     (int *) arg);
-
-	case SOUND_PCM_WRITE_FILTER:
-	case SNDCTL_DSP_SETSYNCRO:
-	case SOUND_PCM_READ_FILTER:
-		return -EINVAL;
-	}
-	return mixer_ioctl(s, cmd, arg);
-}
-
-static long cs4297a_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
-{
-	int ret;
-
-	mutex_lock(&swarm_cs4297a_mutex);
-	ret = cs4297a_ioctl(file, cmd, arg);
-	mutex_unlock(&swarm_cs4297a_mutex);
-
-	return ret;
-}
-
-static int cs4297a_release(struct inode *inode, struct file *file)
-{
-	struct cs4297a_state *s =
-	    (struct cs4297a_state *) file->private_data;
-
-        CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO
-		 "cs4297a: cs4297a_release(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
-			 (unsigned) inode, (unsigned) file, file->f_mode));
-	VALIDATE_STATE(s);
-
-	if (file->f_mode & FMODE_WRITE) {
-		drain_dac(s, file->f_flags & O_NONBLOCK);
-		mutex_lock(&s->open_sem_dac);
-		stop_dac(s);
-		dealloc_dmabuf(s, &s->dma_dac);
-		s->open_mode &= ~FMODE_WRITE;
-		mutex_unlock(&s->open_sem_dac);
-		wake_up(&s->open_wait_dac);
-	}
-	if (file->f_mode & FMODE_READ) {
-		drain_adc(s, file->f_flags & O_NONBLOCK);
-		mutex_lock(&s->open_sem_adc);
-		stop_adc(s);
-		dealloc_dmabuf(s, &s->dma_adc);
-		s->open_mode &= ~FMODE_READ;
-		mutex_unlock(&s->open_sem_adc);
-		wake_up(&s->open_wait_adc);
-	}
-	return 0;
-}
-
-static int cs4297a_locked_open(struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	struct cs4297a_state *s=NULL;
-	struct list_head *entry;
-
-	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
-		"cs4297a: cs4297a_open(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
-			(unsigned) inode, (unsigned) file, file->f_mode));
-	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
-                "cs4297a: status = %08x\n", (int)__raw_readq(SS_CSR(R_SER_STATUS_DEBUG))));
-
-	list_for_each(entry, &cs4297a_devs)
-	{
-		s = list_entry(entry, struct cs4297a_state, list);
-
-		if (!((s->dev_audio ^ minor) & ~0xf))
-			break;
-	}
-	if (entry == &cs4297a_devs)
-		return -ENODEV;
-	if (!s) {
-		CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
-			"cs4297a: cs4297a_open(): Error - unable to find audio state struct\n"));
-		return -ENODEV;
-	}
-	VALIDATE_STATE(s);
-	file->private_data = s;
-
-	// wait for device to become free 
-	if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) {
-		CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO
-			 "cs4297a: cs4297a_open(): Error - must open READ and/or WRITE\n"));
-		return -ENODEV;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-                if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)) != 0) {
-                        printk(KERN_ERR "cs4297a: TX pipe needs to drain\n");
-                        while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)))
-                                ;
-                }
-          
-		mutex_lock(&s->open_sem_dac);
-		while (s->open_mode & FMODE_WRITE) {
-			if (file->f_flags & O_NONBLOCK) {
-				mutex_unlock(&s->open_sem_dac);
-				return -EBUSY;
-			}
-			mutex_unlock(&s->open_sem_dac);
-			oss_broken_sleep_on(&s->open_wait_dac, MAX_SCHEDULE_TIMEOUT);
-
-			if (signal_pending(current)) {
-                                printk("open - sig pending\n");
-				return -ERESTARTSYS;
-                        }
-			mutex_lock(&s->open_sem_dac);
-		}
-	}
-	if (file->f_mode & FMODE_READ) {
-		mutex_lock(&s->open_sem_adc);
-		while (s->open_mode & FMODE_READ) {
-			if (file->f_flags & O_NONBLOCK) {
-				mutex_unlock(&s->open_sem_adc);
-				return -EBUSY;
-			}
-			mutex_unlock(&s->open_sem_adc);
-			oss_broken_sleep_on(&s->open_wait_adc, MAX_SCHEDULE_TIMEOUT);
-
-			if (signal_pending(current)) {
-                                printk("open - sig pending\n");
-				return -ERESTARTSYS;
-                        }
-			mutex_lock(&s->open_sem_adc);
-		}
-	}
-	s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	if (file->f_mode & FMODE_READ) {
-		s->prop_adc.fmt = AFMT_S16_BE;
-		s->prop_adc.fmt_original = s->prop_adc.fmt;
-		s->prop_adc.channels = 2;
-		s->prop_adc.rate = 48000;
-		s->conversion = 0;
-		s->ena &= ~FMODE_READ;
-		s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
-		    s->dma_adc.subdivision = 0;
-		mutex_unlock(&s->open_sem_adc);
-
-		if (prog_dmabuf_adc(s)) {
-			CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
-				"cs4297a: adc Program dmabufs failed.\n"));
-			cs4297a_release(inode, file);
-			return -ENOMEM;
-		}
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		s->prop_dac.fmt = AFMT_S16_BE;
-		s->prop_dac.fmt_original = s->prop_dac.fmt;
-		s->prop_dac.channels = 2;
-		s->prop_dac.rate = 48000;
-		s->conversion = 0;
-		s->ena &= ~FMODE_WRITE;
-		s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
-		    s->dma_dac.subdivision = 0;
-		mutex_unlock(&s->open_sem_dac);
-
-		if (prog_dmabuf_dac(s)) {
-			CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
-				"cs4297a: dac Program dmabufs failed.\n"));
-			cs4297a_release(inode, file);
-			return -ENOMEM;
-		}
-	}
-	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2,
-		  printk(KERN_INFO "cs4297a: cs4297a_open()- 0\n"));
-	return nonseekable_open(inode, file);
-}
-
-static int cs4297a_open(struct inode *inode, struct file *file)
-{
-	int ret;
-
-	mutex_lock(&swarm_cs4297a_mutex);
-	ret = cs4297a_open(inode, file);
-	mutex_unlock(&swarm_cs4297a_mutex);
-
-	return ret;
-}
-
-// ******************************************************************************************
-//   Wave (audio) file operations struct.
-// ******************************************************************************************
-static const struct file_operations cs4297a_audio_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= cs4297a_read,
-	.write		= cs4297a_write,
-	.poll		= cs4297a_poll,
-	.unlocked_ioctl	= cs4297a_unlocked_ioctl,
-	.mmap		= cs4297a_mmap,
-	.open		= cs4297a_open,
-	.release	= cs4297a_release,
-};
-
-static void cs4297a_interrupt(int irq, void *dev_id)
-{
-	struct cs4297a_state *s = (struct cs4297a_state *) dev_id;
-        u32 status;
-
-        status = __raw_readq(SS_CSR(R_SER_STATUS_DEBUG));
-
-        CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
-                 "cs4297a: cs4297a_interrupt() HISR=0x%.8x\n", status));
-
-#if 0
-        /* XXXKW what check *should* be done here? */
-        if (!(status & (M_SYNCSER_RX_EOP_COUNT | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_SYNC_ERR))) {
-                status = __raw_readq(SS_CSR(R_SER_STATUS));
-                printk(KERN_ERR "cs4297a: unexpected interrupt (status %08x)\n", status);
-                return;
-        }
-#endif
-
-        if (status & M_SYNCSER_RX_SYNC_ERR) {
-                status = __raw_readq(SS_CSR(R_SER_STATUS));
-                printk(KERN_ERR "cs4297a: rx sync error (status %08x)\n", status);
-                return;
-        }
-
-        if (status & M_SYNCSER_RX_OVERRUN) {
-                int newptr, i;
-                s->stats.rx_ovrrn++;
-                printk(KERN_ERR "cs4297a: receive FIFO overrun\n");
-
-                /* Fix things up: get the receive descriptor pool
-                   clean and give them back to the hardware */
-                while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX)))
-                        ;
-                newptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
-                                     s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
-                for (i=0; i<DMA_DESCR; i++) {
-                        s->dma_adc.descrtab[i].descr_a &= ~M_DMA_SERRX_SOP;
-                }
-                s->dma_adc.swptr = s->dma_adc.hwptr = newptr;
-                s->dma_adc.count = 0;
-                s->dma_adc.sb_swptr = s->dma_adc.sb_hwptr = s->dma_adc.sample_buf;
-                __raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
-        }
-
-	spin_lock(&s->lock);
-	cs4297a_update_ptr(s,CS_TRUE);
-	spin_unlock(&s->lock);
-
-	CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
-		  "cs4297a: cs4297a_interrupt()-\n"));
-}
-
-#if 0
-static struct initvol {
-	int mixch;
-	int vol;
-} initvol[] __initdata = {
-
-  	{SOUND_MIXER_WRITE_VOLUME, 0x4040},
-        {SOUND_MIXER_WRITE_PCM, 0x4040},
-        {SOUND_MIXER_WRITE_SYNTH, 0x4040},
-	{SOUND_MIXER_WRITE_CD, 0x4040},
-	{SOUND_MIXER_WRITE_LINE, 0x4040},
-	{SOUND_MIXER_WRITE_LINE1, 0x4040},
-	{SOUND_MIXER_WRITE_RECLEV, 0x0000},
-	{SOUND_MIXER_WRITE_SPEAKER, 0x4040},
-	{SOUND_MIXER_WRITE_MIC, 0x0000}
-};
-#endif
-
-static int __init cs4297a_init(void)
-{
-	struct cs4297a_state *s;
-	u32 pwr, id;
-	mm_segment_t fs;
-	int rval;
-	u64 cfg;
-	int mdio_val;
-
-	CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO 
-		"cs4297a: cs4297a_init_module()+ \n"));
-
-        mdio_val = __raw_readq(KSEG1 + A_MAC_REGISTER(2, R_MAC_MDIO)) &
-                (M_MAC_MDIO_DIR|M_MAC_MDIO_OUT);
-
-        /* Check syscfg for synchronous serial on port 1 */
-        cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
-        if (!(cfg & M_SYS_SER1_ENABLE)) {
-                __raw_writeq(cfg | M_SYS_SER1_ENABLE, KSEG1+A_SCD_SYSTEM_CFG);
-                cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
-                if (!(cfg & M_SYS_SER1_ENABLE)) {
-                  printk(KERN_INFO "cs4297a: serial port 1 not configured for synchronous operation\n");
-                  return -1;
-                }
-
-                printk(KERN_INFO "cs4297a: serial port 1 switching to synchronous operation\n");
-                
-                /* Force the codec (on SWARM) to reset by clearing
-                   GENO, preserving MDIO (no effect on CSWARM) */
-                __raw_writeq(mdio_val, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
-                udelay(10);
-        }
-
-        /* Now set GENO */
-        __raw_writeq(mdio_val | M_MAC_GENC, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
-        /* Give the codec some time to finish resetting (start the bit clock) */
-        udelay(100);
-
-	if (!(s = kzalloc(sizeof(struct cs4297a_state), GFP_KERNEL))) {
-		CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
-		      "cs4297a: probe() no memory for state struct.\n"));
-		return -1;
-	}
-        s->magic = CS4297a_MAGIC;
-	init_waitqueue_head(&s->dma_adc.wait);
-	init_waitqueue_head(&s->dma_dac.wait);
-	init_waitqueue_head(&s->dma_adc.reg_wait);
-	init_waitqueue_head(&s->dma_dac.reg_wait);
-	init_waitqueue_head(&s->open_wait);
-	init_waitqueue_head(&s->open_wait_adc);
-	init_waitqueue_head(&s->open_wait_dac);
-	mutex_init(&s->open_sem_adc);
-	mutex_init(&s->open_sem_dac);
-	spin_lock_init(&s->lock);
-
-        s->irq = K_INT_SER_1;
-
-	if (request_irq
-	    (s->irq, cs4297a_interrupt, 0, "Crystal CS4297a", s)) {
-		CS_DBGOUT(CS_INIT | CS_ERROR, 1,
-			  printk(KERN_ERR "cs4297a: irq %u in use\n", s->irq));
-		goto err_irq;
-	}
-	if ((s->dev_audio = register_sound_dsp(&cs4297a_audio_fops, -1)) <
-	    0) {
-		CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
-			 "cs4297a: probe() register_sound_dsp() failed.\n"));
-		goto err_dev1;
-	}
-	if ((s->dev_mixer = register_sound_mixer(&cs4297a_mixer_fops, -1)) <
-	    0) {
-		CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
-			 "cs4297a: probe() register_sound_mixer() failed.\n"));
-		goto err_dev2;
-	}
-
-        if (ser_init(s) || dma_init(s)) {
-		CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
-			 "cs4297a: ser_init failed.\n"));
-		goto err_dev3;
-        }
-
-        do {
-                udelay(4000);
-                rval = cs4297a_read_ac97(s, AC97_POWER_CONTROL, &pwr);
-        } while (!rval && (pwr != 0xf));
-
-        if (!rval) {
-		char *sb1250_duart_present;
-
-                fs = get_fs();
-                set_fs(KERNEL_DS);
-#if 0
-                val = SOUND_MASK_LINE;
-                mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val);
-                for (i = 0; i < ARRAY_SIZE(initvol); i++) {
-                        val = initvol[i].vol;
-                        mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val);
-                }
-//                cs4297a_write_ac97(s, 0x18, 0x0808);
-#else
-                //                cs4297a_write_ac97(s, 0x5e, 0x180);
-                cs4297a_write_ac97(s, 0x02, 0x0808);
-                cs4297a_write_ac97(s, 0x18, 0x0808);
-#endif
-                set_fs(fs);
-
-                list_add(&s->list, &cs4297a_devs);
-
-                cs4297a_read_ac97(s, AC97_VENDOR_ID1, &id);
-
-		sb1250_duart_present = symbol_get(sb1250_duart_present);
-		if (sb1250_duart_present)
-			sb1250_duart_present[1] = 0;
-
-                printk(KERN_INFO "cs4297a: initialized (vendor id = %x)\n", id);
-
-                CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
-                          printk(KERN_INFO "cs4297a: cs4297a_init_module()-\n"));
-                
-                return 0;
-        }
-
- err_dev3:
-	unregister_sound_mixer(s->dev_mixer);
- err_dev2:
-	unregister_sound_dsp(s->dev_audio);
- err_dev1:
-	free_irq(s->irq, s);
- err_irq:
-	kfree(s);
-
-        printk(KERN_INFO "cs4297a: initialization failed\n");
-
-        return -1;
-}
-
-static void __exit cs4297a_cleanup(void)
-{
-        /*
-          XXXKW 
-           disable_irq, free_irq
-           drain DMA queue
-           disable DMA
-           disable TX/RX
-           free memory
-        */
-	CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
-		  printk(KERN_INFO "cs4297a: cleanup_cs4297a() finished\n"));
-}
-
-// --------------------------------------------------------------------- 
-
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("Cirrus Logic CS4297a Driver for Broadcom SWARM board");
-
-// --------------------------------------------------------------------- 
-
-module_init(cs4297a_init);
-module_exit(cs4297a_cleanup);
diff --git a/sound/oss/sys_timer.c b/sound/oss/sys_timer.c
deleted file mode 100644
index d17019d25b99..000000000000
--- a/sound/oss/sys_timer.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * sound/oss/sys_timer.c
- *
- * The default timer for the Level 2 sequencer interface
- * Uses the (1/HZ sec) timer of kernel.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-/*
- * Thomas Sailer   : ioctl code reworked (vmalloc/vfree removed)
- * Andrew Veliath  : adapted tmr2ticks from level 1 sequencer (avoid overflow)
- */
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-static volatile int opened, tmr_running;
-static volatile unsigned int tmr_offs, tmr_ctr;
-static volatile unsigned long ticks_offs;
-static volatile int curr_tempo, curr_timebase;
-static volatile unsigned long curr_ticks;
-static volatile unsigned long next_event_time;
-static unsigned long prev_event_time;
-
-static void     poll_def_tmr(unsigned long dummy);
-static DEFINE_SPINLOCK(lock);
-static DEFINE_TIMER(def_tmr, poll_def_tmr, 0, 0);
-
-static unsigned long
-tmr2ticks(int tmr_value)
-{
-	/*
-	 *    Convert timer ticks to MIDI ticks
-	 */
-
-	unsigned long tmp;
-	unsigned long scale;
-
-	/* tmr_value (ticks per sec) *
-	   1000000 (usecs per sec) / HZ (ticks per sec) -=> usecs */
-	tmp = tmr_value * (1000000 / HZ);
-	scale = (60 * 1000000) / (curr_tempo * curr_timebase);	/* usecs per MIDI tick */
-	return (tmp + scale / 2) / scale;
-}
-
-static void
-poll_def_tmr(unsigned long dummy)
-{
-	if (!opened)
-		return;
-	def_tmr.expires = (1) + jiffies;
-	add_timer(&def_tmr);
-
-	if (!tmr_running)
-		return;
-
-	spin_lock(&lock);
-	tmr_ctr++;
-	curr_ticks = ticks_offs + tmr2ticks(tmr_ctr);
-
-	if (curr_ticks >= next_event_time) {
-		next_event_time = (unsigned long) -1;
-		sequencer_timer(0);
-	}
-
-	spin_unlock(&lock);
-}
-
-static void
-tmr_reset(void)
-{
-	unsigned long   flags;
-
-	spin_lock_irqsave(&lock,flags);
-	tmr_offs = 0;
-	ticks_offs = 0;
-	tmr_ctr = 0;
-	next_event_time = (unsigned long) -1;
-	prev_event_time = 0;
-	curr_ticks = 0;
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static int
-def_tmr_open(int dev, int mode)
-{
-	if (opened)
-		return -EBUSY;
-
-	tmr_reset();
-	curr_tempo = 60;
-	curr_timebase = 100;
-	opened = 1;
-	{
-		def_tmr.expires = (1) + jiffies;
-		add_timer(&def_tmr);
-	}
-
-	return 0;
-}
-
-static void
-def_tmr_close(int dev)
-{
-	opened = tmr_running = 0;
-	del_timer(&def_tmr);
-}
-
-static int
-def_tmr_event(int dev, unsigned char *event)
-{
-	unsigned char   cmd = event[1];
-	unsigned long   parm = *(int *) &event[4];
-
-	switch (cmd)
-	  {
-	  case TMR_WAIT_REL:
-		  parm += prev_event_time;
-	  case TMR_WAIT_ABS:
-		  if (parm > 0)
-		    {
-			    long            time;
-
-			    if (parm <= curr_ticks)	/* It's the time */
-				    return TIMER_NOT_ARMED;
-
-			    time = parm;
-			    next_event_time = prev_event_time = time;
-
-			    return TIMER_ARMED;
-		    }
-		  break;
-
-	  case TMR_START:
-		  tmr_reset();
-		  tmr_running = 1;
-		  break;
-
-	  case TMR_STOP:
-		  tmr_running = 0;
-		  break;
-
-	  case TMR_CONTINUE:
-		  tmr_running = 1;
-		  break;
-
-	  case TMR_TEMPO:
-		  if (parm)
-		    {
-			    if (parm < 8)
-				    parm = 8;
-			    if (parm > 360)
-				    parm = 360;
-			    tmr_offs = tmr_ctr;
-			    ticks_offs += tmr2ticks(tmr_ctr);
-			    tmr_ctr = 0;
-			    curr_tempo = parm;
-		    }
-		  break;
-
-	  case TMR_ECHO:
-		  seq_copy_to_input(event, 8);
-		  break;
-
-	  default:;
-	  }
-
-	return TIMER_NOT_ARMED;
-}
-
-static unsigned long
-def_tmr_get_time(int dev)
-{
-	if (!opened)
-		return 0;
-
-	return curr_ticks;
-}
-
-/* same as sound_timer.c:timer_ioctl!? */
-static int def_tmr_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	int __user *p = arg;
-	int val;
-
-	switch (cmd) {
-	case SNDCTL_TMR_SOURCE:
-		return __put_user(TMR_INTERNAL, p);
-
-	case SNDCTL_TMR_START:
-		tmr_reset();
-		tmr_running = 1;
-		return 0;
-
-	case SNDCTL_TMR_STOP:
-		tmr_running = 0;
-		return 0;
-
-	case SNDCTL_TMR_CONTINUE:
-		tmr_running = 1;
-		return 0;
-
-	case SNDCTL_TMR_TIMEBASE:
-		if (__get_user(val, p))
-			return -EFAULT;
-		if (val) {
-			if (val < 1)
-				val = 1;
-			if (val > 1000)
-				val = 1000;
-			curr_timebase = val;
-		}
-		return __put_user(curr_timebase, p);
-
-	case SNDCTL_TMR_TEMPO:
-		if (__get_user(val, p))
-			return -EFAULT;
-		if (val) {
-			if (val < 8)
-				val = 8;
-			if (val > 250)
-				val = 250;
-			tmr_offs = tmr_ctr;
-			ticks_offs += tmr2ticks(tmr_ctr);
-			tmr_ctr = 0;
-			curr_tempo = val;
-			reprogram_timer();
-		}
-		return __put_user(curr_tempo, p);
-
-	case SNDCTL_SEQ_CTRLRATE:
-		if (__get_user(val, p))
-			return -EFAULT;
-		if (val != 0)	/* Can't change */
-			return -EINVAL;
-		val = ((curr_tempo * curr_timebase) + 30) / 60;
-		return __put_user(val, p);
-		
-	case SNDCTL_SEQ_GETTIME:
-		return __put_user(curr_ticks, p);
-		
-	case SNDCTL_TMR_METRONOME:
-		/* NOP */
-		break;
-		
-	default:;
-	}
-	return -EINVAL;
-}
-
-static void
-def_tmr_arm(int dev, long time)
-{
-	if (time < 0)
-		time = curr_ticks + 1;
-	else if (time <= curr_ticks)	/* It's the time */
-		return;
-
-	next_event_time = prev_event_time = time;
-
-	return;
-}
-
-struct sound_timer_operations default_sound_timer =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"System clock", 0},
-	.priority	= 0,	/* Priority */
-	.devlink	= 0,	/* Local device link */
-	.open		= def_tmr_open,
-	.close		= def_tmr_close,
-	.event		= def_tmr_event,
-	.get_time	= def_tmr_get_time,
-	.ioctl		= def_tmr_ioctl,
-	.arm_timer	= def_tmr_arm
-};
diff --git a/sound/oss/trix.c b/sound/oss/trix.c
deleted file mode 100644
index a57bc635d758..000000000000
--- a/sound/oss/trix.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * sound/oss/trix.c
- *
- * Low level driver for the MediaTrix AudioTrix Pro
- * (MT-0002-PC Control Chip)
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Changes
- *	Alan Cox		Modularisation, cleanup.
- *	Christoph Hellwig	Adapted to module_init/module_exit
- *	Arnaldo C. de Melo	Got rid of attach_uart401
- */
- 
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "sound_config.h"
-#include "sb.h"
-#include "sound_firmware.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-#include "trix_boot.h"
-
-static int mpu;
-
-static bool joystick;
-
-static unsigned char trix_read(int addr)
-{
-	outb(((unsigned char) addr), 0x390);	/* MT-0002-PC ASIC address */
-	return inb(0x391);	/* MT-0002-PC ASIC data */
-}
-
-static void trix_write(int addr, int data)
-{
-	outb(((unsigned char) addr), 0x390);	/* MT-0002-PC ASIC address */
-	outb(((unsigned char) data), 0x391);	/* MT-0002-PC ASIC data */
-}
-
-static void download_boot(int base)
-{
-	int i = 0, n = trix_boot_len;
-
-	if (trix_boot_len == 0)
-		return;
-
-	trix_write(0xf8, 0x00);	/* ??????? */
-	outb((0x01), base + 6);	/* Clear the internal data pointer */
-	outb((0x00), base + 6);	/* Restart */
-
-	/*
-	   *  Write the boot code to the RAM upload/download register.
-	   *  Each write increments the internal data pointer.
-	 */
-	outb((0x01), base + 6);	/* Clear the internal data pointer */
-	outb((0x1A), 0x390);	/* Select RAM download/upload port */
-
-	for (i = 0; i < n; i++)
-		outb((trix_boot[i]), 0x391);
-	for (i = n; i < 10016; i++)	/* Clear up to first 16 bytes of data RAM */
-		outb((0x00), 0x391);
-	outb((0x00), base + 6);	/* Reset */
-	outb((0x50), 0x390);	/* ?????? */
-
-}
-
-static int trix_set_wss_port(struct address_info *hw_config)
-{
-	unsigned char   addr_bits;
-
-	if (trix_read(0x15) != 0x71)	/* No ASIC signature */
-	{
-		MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n"));
-		return 0;
-	}
-
-	/*
-	 * Reset some registers.
-	 */
-
-	trix_write(0x13, 0);
-	trix_write(0x14, 0);
-
-	/*
-	 * Configure the ASIC to place the codec to the proper I/O location
-	 */
-
-	switch (hw_config->io_base)
-	{
-		case 0x530:
-			addr_bits = 0;
-			break;
-		case 0x604:
-			addr_bits = 1;
-			break;
-		case 0xE80:
-			addr_bits = 2;
-			break;
-		case 0xF40:
-			addr_bits = 3;
-			break;
-		default:
-			return 0;
-	}
-
-	trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits);
-	return 1;
-}
-
-/*
- *    Probe and attach routines for the Windows Sound System mode of
- *      AudioTrix Pro
- */
-
-static int __init init_trix_wss(struct address_info *hw_config)
-{
-	static unsigned char dma_bits[4] = {
-		1, 2, 0, 3
-	};
-	struct resource *ports;
-	int config_port = hw_config->io_base + 0;
-	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
-	int old_num_mixers = num_mixers;
-	u8 config, bits;
-	int ret;
- 
-	switch(hw_config->irq) {
-	case 7:
-		bits = 8;
-		break;
-	case 9:
-		bits = 0x10;
-		break;
-	case 10:
-		bits = 0x18;
-		break;
-	case 11:
-		bits = 0x20;
-		break;
-	default:
-		printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
-		return 0;
-	}
-
-	switch (dma1) {
-	case 0:
-	case 1:
-	case 3:
-		break;
-	default:
-		printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1);
-		return 0;
-	}
-
-	switch (dma2) {
-	case -1:
-	case 0:
-	case 1:
-	case 3:
-		break;
-	default:
-		printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2);
-		return 0;
-	}
-
-	/*
-	 * Check if the IO port returns valid signature. The original MS Sound
-	 * system returns 0x04 while some cards (AudioTrix Pro for example)
-	 * return 0x00.
-	 */
-	ports = request_region(hw_config->io_base + 4, 4, "ad1848");
-	if (!ports) {
-		printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
-		return 0;
-	}
-
-	if (!request_region(hw_config->io_base, 4, "MSS config")) {
-		printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
-		release_region(hw_config->io_base + 4, 4);
-		return 0;
-	}
-
-	if (!trix_set_wss_port(hw_config))
-		goto fail;
-
-	config = inb(hw_config->io_base + 3);
-
-	if ((config & 0x3f) != 0x00)
-	{
-		MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base));
-		goto fail;
-	}
-
-	/*
-	 * Check that DMA0 is not in use with a 8 bit board.
-	 */
-
-	if (dma1 == 0 && config & 0x80)
-	{
-		printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n");
-		goto fail;
-	}
-	if (hw_config->irq > 9 && config & 0x80)
-	{
-		printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq);
-		goto fail;
-	}
-
-	ret = ad1848_detect(ports, NULL, hw_config->osp);
-	if (!ret)
-		goto fail;
-
-	if (joystick==1)
-		trix_write(0x15, 0x80);
-
-	/*
-	 * Set the IRQ and DMA addresses.
-	 */
-
-	outb((bits | 0x40), config_port);
-
-	if (dma2 == -1 || dma2 == dma1)
-	{
-		  bits |= dma_bits[dma1];
-		  dma2 = dma1;
-	}
-	else
-	{
-		unsigned char tmp;
-
-		tmp = trix_read(0x13) & ~30;
-		trix_write(0x13, tmp | 0x80 | (dma1 << 4));
-
-		tmp = trix_read(0x14) & ~30;
-		trix_write(0x14, tmp | 0x80 | (dma2 << 4));
-	}
-
-	outb((bits), config_port);	/* Write IRQ+DMA setup */
-
-	hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports,
-					  hw_config->irq,
-					  dma1,
-					  dma2,
-					  0,
-					  hw_config->osp,
-					  THIS_MODULE);
-
-	if (num_mixers > old_num_mixers)	/* Mixer got installed */
-	{
-		AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);	/* Line in */
-		AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
-		AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH);		/* OPL4 */
-		AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM);	/* SB */
-	}
-	return 1;
-
-fail:
-	release_region(hw_config->io_base, 4);
-	release_region(hw_config->io_base + 4, 4);
-	return 0;
-}
-
-static int __init probe_trix_sb(struct address_info *hw_config)
-{
-
-	int tmp;
-	unsigned char conf;
-	extern int sb_be_quiet;
-	int old_quiet;
-	static signed char irq_translate[] = {
-		-1, -1, -1, 0, 1, 2, -1, 3
-	};
-
-	if (trix_boot_len == 0)
-		return 0;	/* No boot code -> no fun */
-
-	if ((hw_config->io_base & 0xffffff8f) != 0x200)
-		return 0;
-
-	tmp = hw_config->irq;
-	if (tmp > 7)
-		return 0;
-	if (irq_translate[tmp] == -1)
-		return 0;
-
-	tmp = hw_config->dma;
-	if (tmp != 1 && tmp != 3)
-		return 0;
-
-	if (!request_region(hw_config->io_base, 16, "soundblaster")) {
-		printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
-		return 0;
-	}
-
-	conf = 0x84;		/* DMA and IRQ enable */
-	conf |= hw_config->io_base & 0x70;	/* I/O address bits */
-	conf |= irq_translate[hw_config->irq];
-	if (hw_config->dma == 3)
-		conf |= 0x08;
-	trix_write(0x1b, conf);
-
-	download_boot(hw_config->io_base);
-
-	hw_config->name = "AudioTrix SB";
-	if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
-		release_region(hw_config->io_base, 16);
-		return 0;
-	}
-
-	hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING;
-
-	/* Prevent false alarms */
-	old_quiet = sb_be_quiet;
-	sb_be_quiet = 1;
-
-	sb_dsp_init(hw_config, THIS_MODULE);
-
-	sb_be_quiet = old_quiet;
-	return 1;
-}
-
-static int __init probe_trix_mpu(struct address_info *hw_config)
-{
-	unsigned char conf;
-	static int irq_bits[] = {
-		-1, -1, -1, 1, 2, 3, -1, 4, -1, 5
-	};
-
-	if (hw_config->irq > 9)
-	{
-		printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
-		return 0;
-	}
-	if (irq_bits[hw_config->irq] == -1)
-	{
-		printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
-		return 0;
-	}
-	switch (hw_config->io_base)
-	{
-		case 0x330:
-			conf = 0x00;
-			break;
-		case 0x370:
-			conf = 0x04;
-			break;
-		case 0x3b0:
-			conf = 0x08;
-			break;
-		case 0x3f0:
-			conf = 0x0c;
-			break;
-		default:
-			return 0;	/* Invalid port */
-	}
-
-	conf |= irq_bits[hw_config->irq] << 4;
-	trix_write(0x19, (trix_read(0x19) & 0x83) | conf);
-	hw_config->name = "AudioTrix Pro";
-	return probe_uart401(hw_config, THIS_MODULE);
-}
-
-static void __exit unload_trix_wss(struct address_info *hw_config)
-{
-	int dma2 = hw_config->dma2;
-
-	if (dma2 == -1)
-		dma2 = hw_config->dma;
-
-	release_region(0x390, 2);
-	release_region(hw_config->io_base, 4);
-
-	ad1848_unload(hw_config->io_base + 4,
-		      hw_config->irq,
-		      hw_config->dma,
-		      dma2,
-		      0);
-	sound_unload_audiodev(hw_config->slots[0]);
-}
-
-static inline void __exit unload_trix_mpu(struct address_info *hw_config)
-{
-	unload_uart401(hw_config);
-}
-
-static inline void __exit unload_trix_sb(struct address_info *hw_config)
-{
-	sb_dsp_unload(hw_config, mpu);
-}
-
-static struct address_info cfg;
-static struct address_info cfg2;
-static struct address_info cfg_mpu;
-
-static int sb;
-static int fw_load;
-
-static int __initdata io	= -1;
-static int __initdata irq	= -1;
-static int __initdata dma	= -1;
-static int __initdata dma2	= -1;	/* Set this for modules that need it */
-static int __initdata sb_io	= -1;
-static int __initdata sb_dma	= -1;
-static int __initdata sb_irq	= -1;
-static int __initdata mpu_io	= -1;
-static int __initdata mpu_irq	= -1;
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-module_param_hw(dma, int, dma, 0);
-module_param_hw(dma2, int, dma, 0);
-module_param_hw(sb_io, int, ioport, 0);
-module_param_hw(sb_dma, int, dma, 0);
-module_param_hw(sb_irq, int, irq, 0);
-module_param_hw(mpu_io, int, ioport, 0);
-module_param_hw(mpu_irq, int, irq, 0);
-module_param(joystick, bool, 0);
-
-static int __init init_trix(void)
-{
-	printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma2;
-
-	cfg2.io_base = sb_io;
-	cfg2.irq = sb_irq;
-	cfg2.dma = sb_dma;
-
-	cfg_mpu.io_base = mpu_io;
-	cfg_mpu.irq = mpu_irq;
-
-	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
-		printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
-		return -EINVAL;
-	}
-
-	if (cfg2.io_base != -1 && (cfg2.irq == -1 || cfg2.dma == -1)) {
-		printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n");
-		return -EINVAL;
-	}
-	if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) {
-		printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n");
-		return -EINVAL;
-	}
-	if (!trix_boot)
-	{
-		fw_load = 1;
-		trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin",
-						    (char **) &trix_boot);
-	}
-
-	if (!request_region(0x390, 2, "AudioTrix")) {
-		printk(KERN_ERR "AudioTrix: Config port I/O conflict\n");
-		return -ENODEV;
-	}
-
-	if (!init_trix_wss(&cfg)) {
-		release_region(0x390, 2);
-		return -ENODEV;
-	}
-
-	/*
-	 *    We must attach in the right order to get the firmware
-	 *      loaded up in time.
-	 */
-
-	if (cfg2.io_base != -1) {
-		sb = probe_trix_sb(&cfg2);
-	}
-	
-	if (cfg_mpu.io_base != -1)
-		mpu = probe_trix_mpu(&cfg_mpu);
-
-	return 0;
-}
-
-static void __exit cleanup_trix(void)
-{
-	if (fw_load)
-		vfree(trix_boot);
-	if (sb)
-		unload_trix_sb(&cfg2);
-	if (mpu)
-		unload_trix_mpu(&cfg_mpu);
-	unload_trix_wss(&cfg);
-}
-
-module_init(init_trix);
-module_exit(cleanup_trix);
-
-#ifndef MODULE
-static int __init setup_trix (char *str)
-{
-	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */
-	int ints[9];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma2	= ints[4];
-	sb_io	= ints[5];
-	sb_irq	= ints[6];
-	sb_dma	= ints[6];
-	mpu_io	= ints[7];
-	mpu_irq	= ints[8];
-
-	return 1;
-}
-
-__setup("trix=", setup_trix);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/tuning.h b/sound/oss/tuning.h
deleted file mode 100644
index a73e3dd39f9a..000000000000
--- a/sound/oss/tuning.h
+++ /dev/null
@@ -1,23 +0,0 @@
-static unsigned short semitone_tuning[24] =
-{
-/*   0 */ 10000, 10595, 11225, 11892, 12599, 13348, 14142, 14983, 
-/*   8 */ 15874, 16818, 17818, 18877, 20000, 21189, 22449, 23784, 
-/*  16 */ 25198, 26697, 28284, 29966, 31748, 33636, 35636, 37755
-};
-
-static unsigned short cent_tuning[100] =
-{
-/*   0 */ 10000, 10006, 10012, 10017, 10023, 10029, 10035, 10041, 
-/*   8 */ 10046, 10052, 10058, 10064, 10070, 10075, 10081, 10087, 
-/*  16 */ 10093, 10099, 10105, 10110, 10116, 10122, 10128, 10134, 
-/*  24 */ 10140, 10145, 10151, 10157, 10163, 10169, 10175, 10181, 
-/*  32 */ 10187, 10192, 10198, 10204, 10210, 10216, 10222, 10228, 
-/*  40 */ 10234, 10240, 10246, 10251, 10257, 10263, 10269, 10275, 
-/*  48 */ 10281, 10287, 10293, 10299, 10305, 10311, 10317, 10323, 
-/*  56 */ 10329, 10335, 10341, 10347, 10353, 10359, 10365, 10371, 
-/*  64 */ 10377, 10383, 10389, 10395, 10401, 10407, 10413, 10419, 
-/*  72 */ 10425, 10431, 10437, 10443, 10449, 10455, 10461, 10467, 
-/*  80 */ 10473, 10479, 10485, 10491, 10497, 10503, 10509, 10515, 
-/*  88 */ 10521, 10528, 10534, 10540, 10546, 10552, 10558, 10564, 
-/*  96 */ 10570, 10576, 10582, 10589
-};
diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c
deleted file mode 100644
index 83dcc85b8688..000000000000
--- a/sound/oss/uart401.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * sound/oss/uart401.c
- *
- * MPU-401 UART driver (formerly uart401_midi.c)
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Changes:
- *	Alan Cox		Reformatted, removed sound_mem usage, use normal Linux
- *				interrupt allocation. Protect against bogus unload
- *				Fixed to allow IRQ > 15
- *	Christoph Hellwig	Adapted to module_init/module_exit
- *	Arnaldo C. de Melo	got rid of check_region
- *
- * Status:
- *		Untested
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "mpu401.h"
-
-struct uart401_devc
-{
-	int             base;
-	int             irq;
-	int            *osp;
-	void            (*midi_input_intr) (int dev, unsigned char data);
-	int             opened, disabled;
-	volatile unsigned char input_byte;
-	int             my_dev;
-	int             share_irq;
-	spinlock_t	lock;
-};
-
-#define	DATAPORT   (devc->base)
-#define	COMDPORT   (devc->base+1)
-#define	STATPORT   (devc->base+1)
-
-static int uart401_status(struct uart401_devc *devc)
-{
-	return inb(STATPORT);
-}
-
-#define input_avail(devc) (!(uart401_status(devc)&INPUT_AVAIL))
-#define output_ready(devc)	(!(uart401_status(devc)&OUTPUT_READY))
-
-static void uart401_cmd(struct uart401_devc *devc, unsigned char cmd)
-{
-	outb((cmd), COMDPORT);
-}
-
-static int uart401_read(struct uart401_devc *devc)
-{
-	return inb(DATAPORT);
-}
-
-static void uart401_write(struct uart401_devc *devc, unsigned char byte)
-{
-	outb((byte), DATAPORT);
-}
-
-#define	OUTPUT_READY	0x40
-#define	INPUT_AVAIL	0x80
-#define	MPU_ACK		0xFE
-#define	MPU_RESET	0xFF
-#define	UART_MODE_ON	0x3F
-
-static int      reset_uart401(struct uart401_devc *devc);
-static void     enter_uart_mode(struct uart401_devc *devc);
-
-static void uart401_input_loop(struct uart401_devc *devc)
-{
-	int work_limit=30000;
-	
-	while (input_avail(devc) && --work_limit)
-	{
-		unsigned char   c = uart401_read(devc);
-
-		if (c == MPU_ACK)
-			devc->input_byte = c;
-		else if (devc->opened & OPEN_READ && devc->midi_input_intr)
-			devc->midi_input_intr(devc->my_dev, c);
-	}
-	if(work_limit==0)
-		printk(KERN_WARNING "Too much work in interrupt on uart401 (0x%X). UART jabbering ??\n", devc->base);
-}
-
-irqreturn_t uart401intr(int irq, void *dev_id)
-{
-	struct uart401_devc *devc = dev_id;
-
-	if (devc == NULL)
-	{
-		printk(KERN_ERR "uart401: bad devc\n");
-		return IRQ_NONE;
-	}
-
-	if (input_avail(devc))
-		uart401_input_loop(devc);
-	return IRQ_HANDLED;
-}
-
-static int
-uart401_open(int dev, int mode,
-	     void            (*input) (int dev, unsigned char data),
-	     void            (*output) (int dev)
-)
-{
-	struct uart401_devc *devc = (struct uart401_devc *)
-				    midi_devs[dev]->devc;
-
-	if (devc->opened)
-		return -EBUSY;
-
-	/* Flush the UART */
-	
-	while (input_avail(devc))
-		uart401_read(devc);
-
-	devc->midi_input_intr = input;
-	devc->opened = mode;
-	enter_uart_mode(devc);
-	devc->disabled = 0;
-
-	return 0;
-}
-
-static void uart401_close(int dev)
-{
-	struct uart401_devc *devc = (struct uart401_devc *)
-				    midi_devs[dev]->devc;
-
-	reset_uart401(devc);
-	devc->opened = 0;
-}
-
-static int uart401_out(int dev, unsigned char midi_byte)
-{
-	int timeout;
-	unsigned long flags;
-	struct uart401_devc *devc = (struct uart401_devc *)
-				    midi_devs[dev]->devc;
-
-	if (devc->disabled)
-		return 1;
-	/*
-	 * Test for input since pending input seems to block the output.
-	 */
-
-	spin_lock_irqsave(&devc->lock,flags);	
-	if (input_avail(devc))
-		uart401_input_loop(devc);
-
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	/*
-	 * Sometimes it takes about 13000 loops before the output becomes ready
-	 * (After reset). Normally it takes just about 10 loops.
-	 */
-
-	for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
-
-	if (!output_ready(devc))
-	{
-		  printk(KERN_WARNING "uart401: Timeout - Device not responding\n");
-		  devc->disabled = 1;
-		  reset_uart401(devc);
-		  enter_uart_mode(devc);
-		  return 1;
-	}
-	uart401_write(devc, midi_byte);
-	return 1;
-}
-
-static inline int uart401_start_read(int dev)
-{
-	return 0;
-}
-
-static inline int uart401_end_read(int dev)
-{
-	return 0;
-}
-
-static inline void uart401_kick(int dev)
-{
-}
-
-static inline int uart401_buffer_status(int dev)
-{
-	return 0;
-}
-
-#define MIDI_SYNTH_NAME	"MPU-401 UART"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-#include "midi_synth.h"
-
-static const struct midi_operations uart401_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"MPU-401 (UART) MIDI", 0, 0, SNDCARD_MPU401},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= uart401_open,
-	.close		= uart401_close,
-	.outputc	= uart401_out,
-	.start_read	= uart401_start_read,
-	.end_read	= uart401_end_read,
-	.kick		= uart401_kick,
-	.buffer_status	= uart401_buffer_status,
-};
-
-static void enter_uart_mode(struct uart401_devc *devc)
-{
-	int ok, timeout;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock,flags);	
-	for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
-
-	devc->input_byte = 0;
-	uart401_cmd(devc, UART_MODE_ON);
-
-	ok = 0;
-	for (timeout = 50000; timeout > 0 && !ok; timeout--)
-		if (devc->input_byte == MPU_ACK)
-			ok = 1;
-		else if (input_avail(devc))
-			if (uart401_read(devc) == MPU_ACK)
-				ok = 1;
-
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static int reset_uart401(struct uart401_devc *devc)
-{
-	int ok, timeout, n;
-
-	/*
-	 * Send the RESET command. Try again if no success at the first time.
-	 */
-
-	ok = 0;
-
-	for (n = 0; n < 2 && !ok; n++)
-	{
-		for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
-		devc->input_byte = 0;
-		uart401_cmd(devc, MPU_RESET);
-
-		/*
-		 * Wait at least 25 msec. This method is not accurate so let's make the
-		 * loop bit longer. Cannot sleep since this is called during boot.
-		 */
-
-		for (timeout = 50000; timeout > 0 && !ok; timeout--)
-		{
-			if (devc->input_byte == MPU_ACK)	/* Interrupt */
-				ok = 1;
-			else if (input_avail(devc))
-			{
-				if (uart401_read(devc) == MPU_ACK)
-					ok = 1;
-			}
-		}
-	}
-
-	/* Flush input before enabling interrupts */
-	if (ok)
-		uart401_input_loop(devc);
-	else
-		DDB(printk("Reset UART401 failed - No hardware detected.\n"));
-
-	return ok;
-}
-
-int probe_uart401(struct address_info *hw_config, struct module *owner)
-{
-	struct uart401_devc *devc;
-	char *name = "MPU-401 (UART) MIDI";
-	int ok = 0;
-	unsigned long flags;
-
-	DDB(printk("Entered probe_uart401()\n"));
-
-	/* Default to "not found" */
-	hw_config->slots[4] = -1;
-
-	if (!request_region(hw_config->io_base, 4, "MPU-401 UART")) {
-		printk(KERN_INFO "uart401: could not request_region(%d, 4)\n", hw_config->io_base);
-		return 0;
-	}
-
-	devc = kmalloc(sizeof(struct uart401_devc), GFP_KERNEL);
-	if (!devc) {
-		printk(KERN_WARNING "uart401: Can't allocate memory\n");
-		goto cleanup_region;
-	}
-
-	devc->base = hw_config->io_base;
-	devc->irq = hw_config->irq;
-	devc->osp = hw_config->osp;
-	devc->midi_input_intr = NULL;
-	devc->opened = 0;
-	devc->input_byte = 0;
-	devc->my_dev = 0;
-	devc->share_irq = 0;
-	spin_lock_init(&devc->lock);
-
-	spin_lock_irqsave(&devc->lock,flags);	
-	ok = reset_uart401(devc);
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	if (!ok)
-		goto cleanup_devc;
-
-	if (hw_config->name)
-		name = hw_config->name;
-
-	if (devc->irq < 0) {
-		devc->share_irq = 1;
-		devc->irq *= -1;
-	} else
-		devc->share_irq = 0;
-
-	if (!devc->share_irq)
-		if (request_irq(devc->irq, uart401intr, 0, "MPU-401 UART", devc) < 0) {
-			printk(KERN_WARNING "uart401: Failed to allocate IRQ%d\n", devc->irq);
-			devc->share_irq = 1;
-		}
-	devc->my_dev = sound_alloc_mididev();
-	enter_uart_mode(devc);
-
-	if (devc->my_dev == -1) {
-		printk(KERN_INFO "uart401: Too many midi devices detected\n");
-		goto cleanup_irq;
-	}
-	conf_printf(name, hw_config);
-	midi_devs[devc->my_dev] = kmemdup(&uart401_operations,
-					  sizeof(struct midi_operations),
-					  GFP_KERNEL);
-	if (!midi_devs[devc->my_dev]) {
-		printk(KERN_ERR "uart401: Failed to allocate memory\n");
-		goto cleanup_unload_mididev;
-	}
-
-	if (owner)
-		midi_devs[devc->my_dev]->owner = owner;
-	
-	midi_devs[devc->my_dev]->devc = devc;
-	midi_devs[devc->my_dev]->converter = kmemdup(&std_midi_synth,
-						     sizeof(struct synth_operations),
-						     GFP_KERNEL);
-
-	if (!midi_devs[devc->my_dev]->converter) {
-		printk(KERN_WARNING "uart401: Failed to allocate memory\n");
-		goto cleanup_midi_devs;
-	}
-	strcpy(midi_devs[devc->my_dev]->info.name, name);
-	midi_devs[devc->my_dev]->converter->id = "UART401";
-	midi_devs[devc->my_dev]->converter->midi_dev = devc->my_dev;
-
-	if (owner)
-		midi_devs[devc->my_dev]->converter->owner = owner;
-
-	hw_config->slots[4] = devc->my_dev;
-	sequencer_init();
-	devc->opened = 0;
-	return 1;
-cleanup_midi_devs:
-	kfree(midi_devs[devc->my_dev]);
-cleanup_unload_mididev:
-	sound_unload_mididev(devc->my_dev);
-cleanup_irq:
-	if (!devc->share_irq)
-		free_irq(devc->irq, devc);
-cleanup_devc:
-	kfree(devc);
-cleanup_region:
-	release_region(hw_config->io_base, 4);
-	return 0;
-}
-
-void unload_uart401(struct address_info *hw_config)
-{
-	struct uart401_devc *devc;
-	int n=hw_config->slots[4];
-	
-	/* Not set up */
-	if(n==-1 || midi_devs[n]==NULL)
-		return;
-		
-	/* Not allocated (erm ??) */
-	
-	devc = midi_devs[hw_config->slots[4]]->devc;
-	if (devc == NULL)
-		return;
-
-	reset_uart401(devc);
-	release_region(hw_config->io_base, 4);
-
-	if (!devc->share_irq)
-		free_irq(devc->irq, devc);
-	kfree(midi_devs[devc->my_dev]->converter);
-	kfree(midi_devs[devc->my_dev]);
-	kfree(devc);
-
-	/* This kills midi_devs[x] */
-	sound_unload_mididev(hw_config->slots[4]);
-}
-
-EXPORT_SYMBOL(probe_uart401);
-EXPORT_SYMBOL(unload_uart401);
-EXPORT_SYMBOL(uart401intr);
-
-static struct address_info cfg_mpu;
-
-static int io = -1;
-static int irq = -1;
-
-module_param_hw(io, int, ioport, 0444);
-module_param_hw(irq, int, irq, 0444);
-
-
-static int __init init_uart401(void)
-{
-	cfg_mpu.irq = irq;
-	cfg_mpu.io_base = io;
-
-	/* Can be loaded either for module use or to provide functions
-	   to others */
-	if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1) {
-		printk(KERN_INFO "MPU-401 UART driver Copyright (C) Hannu Savolainen 1993-1997");
-		if (!probe_uart401(&cfg_mpu, THIS_MODULE))
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void __exit cleanup_uart401(void)
-{
-	if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1)
-		unload_uart401(&cfg_mpu);
-}
-
-module_init(init_uart401);
-module_exit(cleanup_uart401);
-
-#ifndef MODULE
-static int __init setup_uart401(char *str)
-{
-	/* io, irq */
-	int ints[3];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io = ints[1];
-	irq = ints[2];
-	
-	return 1;
-}
-
-__setup("uart401=", setup_uart401);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c
deleted file mode 100644
index eda32d7eddbd..000000000000
--- a/sound/oss/uart6850.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * sound/oss/uart6850.c
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- * Extended by Alan Cox for Red Hat Software. Now a loadable MIDI driver.
- * 28/4/97 - (C) Copyright Alan Cox. Released under the GPL version 2.
- *
- * Alan Cox:		Updated for new modular code. Removed snd_* irq handling. Now
- *			uses native linux resources
- * Christoph Hellwig:	Adapted to module_init/module_exit
- * Jeff Garzik:		Made it work again, in theory
- *			FIXME: If the request_irq() succeeds, the probe succeeds. Ug.
- *
- *	Status: Testing required (no shit -jgarzik)
- *
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-/* Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl:
- *      added 6850 support, used with COVOX SoundMaster II and custom cards.
- */
-
-#include "sound_config.h"
-
-static int uart6850_base = 0x330;
-
-static int *uart6850_osp;
-
-#define	DATAPORT   (uart6850_base)
-#define	COMDPORT   (uart6850_base+1)
-#define	STATPORT   (uart6850_base+1)
-
-static int uart6850_status(void)
-{
-	return inb(STATPORT);
-}
-
-#define input_avail()		(uart6850_status()&INPUT_AVAIL)
-#define output_ready()		(uart6850_status()&OUTPUT_READY)
-
-static void uart6850_cmd(unsigned char cmd)
-{
-	outb(cmd, COMDPORT);
-}
-
-static int uart6850_read(void)
-{
-	return inb(DATAPORT);
-}
-
-static void uart6850_write(unsigned char byte)
-{
-	outb(byte, DATAPORT);
-}
-
-#define	OUTPUT_READY	0x02	/* Mask for data ready Bit */
-#define	INPUT_AVAIL	0x01	/* Mask for Data Send Ready Bit */
-
-#define	UART_RESET	0x95
-#define	UART_MODE_ON	0x03
-
-static int uart6850_opened;
-static int uart6850_irq;
-static int uart6850_detected;
-static int my_dev;
-static DEFINE_SPINLOCK(lock);
-
-static void (*midi_input_intr) (int dev, unsigned char data);
-static void poll_uart6850(unsigned long dummy);
-
-
-static DEFINE_TIMER(uart6850_timer, poll_uart6850, 0, 0);
-
-static void uart6850_input_loop(void)
-{
-	int count = 10;
-
-	while (count)
-	{
-		/*
-		 * Not timed out
-		 */
-		if (input_avail())
-		{
-			unsigned char c = uart6850_read();
-			count = 100;
-			if (uart6850_opened & OPEN_READ)
-				midi_input_intr(my_dev, c);
-		}
-		else
-		{
-			while (!input_avail() && count)
-				count--;
-		}
-	}
-}
-
-static irqreturn_t m6850intr(int irq, void *dev_id)
-{
-	if (input_avail())
-		uart6850_input_loop();
-	return IRQ_HANDLED;
-}
-
-/*
- *	It looks like there is no input interrupts in the UART mode. Let's try
- *	polling.
- */
-
-static void poll_uart6850(unsigned long dummy)
-{
-	unsigned long flags;
-
-	if (!(uart6850_opened & OPEN_READ))
-		return;		/* Device has been closed */
-
-	spin_lock_irqsave(&lock,flags);
-	if (input_avail())
-		uart6850_input_loop();
-
-	uart6850_timer.expires = 1 + jiffies;
-	add_timer(&uart6850_timer);
-	
-	/*
-	 *	Come back later
-	 */
-
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static int uart6850_open(int dev, int mode,
-	      void            (*input) (int dev, unsigned char data),
-	      void            (*output) (int dev)
-)
-{
-	if (uart6850_opened)
-	{
-/*		  printk("Midi6850: Midi busy\n");*/
-		  return -EBUSY;
-	}
-
-	uart6850_cmd(UART_RESET);
-	uart6850_input_loop();
-	midi_input_intr = input;
-	uart6850_opened = mode;
-	poll_uart6850(0);	/*
-				 * Enable input polling
-				 */
-
-	return 0;
-}
-
-static void uart6850_close(int dev)
-{
-	uart6850_cmd(UART_MODE_ON);
-	del_timer(&uart6850_timer);
-	uart6850_opened = 0;
-}
-
-static int uart6850_out(int dev, unsigned char midi_byte)
-{
-	int timeout;
-	unsigned long flags;
-
-	/*
-	 * Test for input since pending input seems to block the output.
-	 */
-
-	spin_lock_irqsave(&lock,flags);
-
-	if (input_avail())
-		uart6850_input_loop();
-
-	spin_unlock_irqrestore(&lock,flags);
-
-	/*
-	 * Sometimes it takes about 13000 loops before the output becomes ready
-	 * (After reset). Normally it takes just about 10 loops.
-	 */
-
-	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
-										 * Wait
-										 */
-	if (!output_ready())
-	{
-		printk(KERN_WARNING "Midi6850: Timeout\n");
-		return 0;
-	}
-	uart6850_write(midi_byte);
-	return 1;
-}
-
-static inline int uart6850_command(int dev, unsigned char *midi_byte)
-{
-	return 1;
-}
-
-static inline int uart6850_start_read(int dev)
-{
-	return 0;
-}
-
-static inline int uart6850_end_read(int dev)
-{
-	return 0;
-}
-
-static inline void uart6850_kick(int dev)
-{
-}
-
-static inline int uart6850_buffer_status(int dev)
-{
-	return 0;		/*
-				 * No data in buffers
-				 */
-}
-
-#define MIDI_SYNTH_NAME	"6850 UART Midi"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-#include "midi_synth.h"
-
-static struct midi_operations uart6850_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"6850 UART", 0, 0, SNDCARD_UART6850},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= uart6850_open,
-	.close		= uart6850_close,
-	.outputc	= uart6850_out,
-	.start_read	= uart6850_start_read,
-	.end_read	= uart6850_end_read,
-	.kick		= uart6850_kick,
-	.command	= uart6850_command,
-	.buffer_status	= uart6850_buffer_status
-};
-
-
-static void __init attach_uart6850(struct address_info *hw_config)
-{
-	int ok, timeout;
-	unsigned long   flags;
-
-	if (!uart6850_detected)
-		return;
-
-	if ((my_dev = sound_alloc_mididev()) == -1)
-	{
-		printk(KERN_INFO "uart6850: Too many midi devices detected\n");
-		return;
-	}
-	uart6850_base = hw_config->io_base;
-	uart6850_osp = hw_config->osp;
-	uart6850_irq = hw_config->irq;
-
-	spin_lock_irqsave(&lock,flags);
-
-	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
-										 * Wait
-										 */
-	uart6850_cmd(UART_MODE_ON);
-	ok = 1;
-	spin_unlock_irqrestore(&lock,flags);
-
-	conf_printf("6850 Midi Interface", hw_config);
-
-	std_midi_synth.midi_dev = my_dev;
-	hw_config->slots[4] = my_dev;
-	midi_devs[my_dev] = &uart6850_operations;
-	sequencer_init();
-}
-
-static inline int reset_uart6850(void)
-{
-	uart6850_read();
-	return 1;		/*
-				 * OK
-				 */
-}
-
-static int __init probe_uart6850(struct address_info *hw_config)
-{
-	int ok;
-
-	uart6850_osp = hw_config->osp;
-	uart6850_base = hw_config->io_base;
-	uart6850_irq = hw_config->irq;
-
-	if (request_irq(uart6850_irq, m6850intr, 0, "MIDI6850", NULL) < 0)
-		return 0;
-
-	ok = reset_uart6850();
-	uart6850_detected = ok;
-	return ok;
-}
-
-static void __exit unload_uart6850(struct address_info *hw_config)
-{
-	free_irq(hw_config->irq, NULL);
-	sound_unload_mididev(hw_config->slots[4]);
-}
-
-static struct address_info cfg_mpu;
-
-static int __initdata io = -1;
-static int __initdata irq = -1;
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-
-static int __init init_uart6850(void)
-{
-	cfg_mpu.io_base = io;
-	cfg_mpu.irq = irq;
-
-	if (cfg_mpu.io_base == -1 || cfg_mpu.irq == -1) {
-		printk(KERN_INFO "uart6850: irq and io must be set.\n");
-		return -EINVAL;
-	}
-
-	if (probe_uart6850(&cfg_mpu))
-		return -ENODEV;
-	attach_uart6850(&cfg_mpu);
-
-	return 0;
-}
-
-static void __exit cleanup_uart6850(void)
-{
-	unload_uart6850(&cfg_mpu);
-}
-
-module_init(init_uart6850);
-module_exit(cleanup_uart6850);
-
-#ifndef MODULE
-static int __init setup_uart6850(char *str)
-{
-	/* io, irq */
-	int ints[3];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io = ints[1];
-	irq = ints[2];
-
-	return 1;
-}
-__setup("uart6850=", setup_uart6850);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/ulaw.h b/sound/oss/ulaw.h
deleted file mode 100644
index 0ff8c0a3bda0..000000000000
--- a/sound/oss/ulaw.h
+++ /dev/null
@@ -1,69 +0,0 @@
-static unsigned char ulaw_dsp[] = {
-     3,    7,   11,   15,   19,   23,   27,   31,
-    35,   39,   43,   47,   51,   55,   59,   63,
-    66,   68,   70,   72,   74,   76,   78,   80,
-    82,   84,   86,   88,   90,   92,   94,   96,
-    98,   99,  100,  101,  102,  103,  104,  105,
-   106,  107,  108,  109,  110,  111,  112,  113,
-   113,  114,  114,  115,  115,  116,  116,  117,
-   117,  118,  118,  119,  119,  120,  120,  121,
-   121,  121,  122,  122,  122,  122,  123,  123,
-   123,  123,  124,  124,  124,  124,  125,  125,
-   125,  125,  125,  125,  126,  126,  126,  126,
-   126,  126,  126,  126,  127,  127,  127,  127,
-   127,  127,  127,  127,  127,  127,  127,  127,
-   128,  128,  128,  128,  128,  128,  128,  128,
-   128,  128,  128,  128,  128,  128,  128,  128,
-   128,  128,  128,  128,  128,  128,  128,  128,
-   253,  249,  245,  241,  237,  233,  229,  225,
-   221,  217,  213,  209,  205,  201,  197,  193,
-   190,  188,  186,  184,  182,  180,  178,  176,
-   174,  172,  170,  168,  166,  164,  162,  160,
-   158,  157,  156,  155,  154,  153,  152,  151,
-   150,  149,  148,  147,  146,  145,  144,  143,
-   143,  142,  142,  141,  141,  140,  140,  139,
-   139,  138,  138,  137,  137,  136,  136,  135,
-   135,  135,  134,  134,  134,  134,  133,  133,
-   133,  133,  132,  132,  132,  132,  131,  131,
-   131,  131,  131,  131,  130,  130,  130,  130,
-   130,  130,  130,  130,  129,  129,  129,  129,
-   129,  129,  129,  129,  129,  129,  129,  129,
-   128,  128,  128,  128,  128,  128,  128,  128,
-   128,  128,  128,  128,  128,  128,  128,  128,
-   128,  128,  128,  128,  128,  128,  128,  128,
-};
-
-static unsigned char dsp_ulaw[] = {
-     0,    0,    0,    0,    0,    1,    1,    1,
-     1,    2,    2,    2,    2,    3,    3,    3,
-     3,    4,    4,    4,    4,    5,    5,    5,
-     5,    6,    6,    6,    6,    7,    7,    7,
-     7,    8,    8,    8,    8,    9,    9,    9,
-     9,   10,   10,   10,   10,   11,   11,   11,
-    11,   12,   12,   12,   12,   13,   13,   13,
-    13,   14,   14,   14,   14,   15,   15,   15,
-    15,   16,   16,   17,   17,   18,   18,   19,
-    19,   20,   20,   21,   21,   22,   22,   23,
-    23,   24,   24,   25,   25,   26,   26,   27,
-    27,   28,   28,   29,   29,   30,   30,   31,
-    31,   32,   33,   34,   35,   36,   37,   38,
-    39,   40,   41,   42,   43,   44,   45,   46,
-    47,   49,   51,   53,   55,   57,   59,   61,
-    63,   66,   70,   74,   78,   84,   92,  104,
-   254,  231,  219,  211,  205,  201,  197,  193,
-   190,  188,  186,  184,  182,  180,  178,  176,
-   175,  174,  173,  172,  171,  170,  169,  168,
-   167,  166,  165,  164,  163,  162,  161,  160,
-   159,  159,  158,  158,  157,  157,  156,  156,
-   155,  155,  154,  154,  153,  153,  152,  152,
-   151,  151,  150,  150,  149,  149,  148,  148,
-   147,  147,  146,  146,  145,  145,  144,  144,
-   143,  143,  143,  143,  142,  142,  142,  142,
-   141,  141,  141,  141,  140,  140,  140,  140,
-   139,  139,  139,  139,  138,  138,  138,  138,
-   137,  137,  137,  137,  136,  136,  136,  136,
-   135,  135,  135,  135,  134,  134,  134,  134,
-   133,  133,  133,  133,  132,  132,  132,  132,
-   131,  131,  131,  131,  130,  130,  130,  130,
-   129,  129,  129,  129,  128,  128,  128,  128,
-};
diff --git a/sound/oss/v_midi.c b/sound/oss/v_midi.c
deleted file mode 100644
index fc0ba276cc8f..000000000000
--- a/sound/oss/v_midi.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * sound/oss/v_midi.c
- *
- * The low level driver for the Sound Blaster DS chips.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1996
- *
- * USS/Lite for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- * ??
- *
- * Changes
- *	Alan Cox		Modularisation, changed memory allocations
- *	Christoph Hellwig	Adapted to module_init/module_exit
- *
- * Status
- *	Untested
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "v_midi.h"
-
-static vmidi_devc *v_devc[2] = { NULL, NULL};
-static int midi1,midi2;
-static void *midi_mem = NULL;
-
-/*
- * The DSP channel can be used either for input or output. Variable
- * 'sb_irq_mode' will be set when the program calls read or write first time
- * after open. Current version doesn't support mode changes without closing
- * and reopening the device. Support for this feature may be implemented in a
- * future version of this driver.
- */
-
-
-static int v_midi_open (int dev, int mode,
-	      void            (*input) (int dev, unsigned char data),
-	      void            (*output) (int dev)
-)
-{
-	vmidi_devc *devc = midi_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-		return -ENXIO;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	if (devc->opened)
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
-		return -EBUSY;
-	}
-	devc->opened = 1;
-	spin_unlock_irqrestore(&devc->lock,flags);
-
-	devc->intr_active = 1;
-
-	if (mode & OPEN_READ)
-	{
-		devc->input_opened = 1;
-		devc->midi_input_intr = input;
-	}
-
-	return 0;
-}
-
-static void v_midi_close (int dev)
-{
-	vmidi_devc *devc = midi_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-		return;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	devc->intr_active = 0;
-	devc->input_opened = 0;
-	devc->opened = 0;
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static int v_midi_out (int dev, unsigned char midi_byte)
-{
-	vmidi_devc *devc = midi_devs[dev]->devc;
-	vmidi_devc *pdevc;
-
-	if (devc == NULL)
-		return -ENXIO;
-
-	pdevc = midi_devs[devc->pair_mididev]->devc;
-	if (pdevc->input_opened > 0){
-		if (MIDIbuf_avail(pdevc->my_mididev) > 500)
-			return 0;
-		pdevc->midi_input_intr (pdevc->my_mididev, midi_byte);
-	}
-	return 1;
-}
-
-static inline int v_midi_start_read (int dev)
-{
-	return 0;
-}
-
-static int v_midi_end_read (int dev)
-{
-	vmidi_devc *devc = midi_devs[dev]->devc;
-	if (devc == NULL)
-		return -ENXIO;
-
-	devc->intr_active = 0;
-	return 0;
-}
-
-/* why -EPERM and not -EINVAL?? */
-
-static inline int v_midi_ioctl (int dev, unsigned cmd, void __user *arg)
-{
-	return -EPERM;
-}
-
-
-#define MIDI_SYNTH_NAME	"Loopback MIDI"
-#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
-
-#include "midi_synth.h"
-
-static struct midi_operations v_midi_operations =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"Loopback MIDI Port 1", 0, 0, SNDCARD_VMIDI},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= v_midi_open,
-	.close		= v_midi_close,
-	.ioctl		= v_midi_ioctl,
-	.outputc	= v_midi_out,
-	.start_read	= v_midi_start_read,
-	.end_read	= v_midi_end_read,
-};
-
-static struct midi_operations v_midi_operations2 =
-{
-	.owner		= THIS_MODULE,
-	.info		= {"Loopback MIDI Port 2", 0, 0, SNDCARD_VMIDI},
-	.converter	= &std_midi_synth,
-	.in_info	= {0},
-	.open		= v_midi_open,
-	.close		= v_midi_close,
-	.ioctl		= v_midi_ioctl,
-	.outputc	= v_midi_out,
-	.start_read	= v_midi_start_read,
-	.end_read	= v_midi_end_read,
-};
-
-/*
- *	We kmalloc just one of these - it makes life simpler and the code
- *	cleaner and the memory handling far more efficient
- */
- 
-struct vmidi_memory
-{
-	/* Must be first */
-	struct midi_operations m_ops[2];
-	struct synth_operations s_ops[2];
-	struct vmidi_devc v_ops[2];
-};
-
-static void __init attach_v_midi (struct address_info *hw_config)
-{
-	struct vmidi_memory *m;
-	/* printk("Attaching v_midi device.....\n"); */
-
-	midi1 = sound_alloc_mididev();
-	if (midi1 == -1)
-	{
-		printk(KERN_ERR "v_midi: Too many midi devices detected\n");
-		return;
-	}
-	
-	m = kmalloc(sizeof(struct vmidi_memory), GFP_KERNEL);
-	if (m == NULL)
-	{
-		printk(KERN_WARNING "Loopback MIDI: Failed to allocate memory\n");
-		sound_unload_mididev(midi1);
-		return;
-	}
-	
-	midi_mem = m;
-	
-	midi_devs[midi1] = &m->m_ops[0];
-	
-
-	midi2 = sound_alloc_mididev();
-	if (midi2 == -1)
-	{
-		printk (KERN_ERR "v_midi: Too many midi devices detected\n");
-		kfree(m);
-		sound_unload_mididev(midi1);
-		return;
-	}
-
-	midi_devs[midi2] = &m->m_ops[1];
-
-	/* printk("VMIDI1: %d   VMIDI2: %d\n",midi1,midi2); */
-
-	/* for MIDI-1 */
-	v_devc[0] = &m->v_ops[0];
-	memcpy ((char *) midi_devs[midi1], (char *) &v_midi_operations,
-		sizeof (struct midi_operations));
-
-	v_devc[0]->my_mididev = midi1;
-	v_devc[0]->pair_mididev = midi2;
-	v_devc[0]->opened = v_devc[0]->input_opened = 0;
-	v_devc[0]->intr_active = 0;
-	v_devc[0]->midi_input_intr = NULL;
-	spin_lock_init(&v_devc[0]->lock);
-
-	midi_devs[midi1]->devc = v_devc[0];
-
-	midi_devs[midi1]->converter = &m->s_ops[0];
-	std_midi_synth.midi_dev = midi1;
-	memcpy ((char *) midi_devs[midi1]->converter, (char *) &std_midi_synth,
-		sizeof (struct synth_operations));
-	midi_devs[midi1]->converter->id = "V_MIDI 1";
-
-	/* for MIDI-2 */
-	v_devc[1] = &m->v_ops[1];
-
-	memcpy ((char *) midi_devs[midi2], (char *) &v_midi_operations2,
-		sizeof (struct midi_operations));
-
-	v_devc[1]->my_mididev = midi2;
-	v_devc[1]->pair_mididev = midi1;
-	v_devc[1]->opened = v_devc[1]->input_opened = 0;
-	v_devc[1]->intr_active = 0;
-	v_devc[1]->midi_input_intr = NULL;
-	spin_lock_init(&v_devc[1]->lock);
-
-	midi_devs[midi2]->devc = v_devc[1];
-	midi_devs[midi2]->converter = &m->s_ops[1];
-
-	std_midi_synth.midi_dev = midi2;
-	memcpy ((char *) midi_devs[midi2]->converter, (char *) &std_midi_synth,
-		sizeof (struct synth_operations));
-	midi_devs[midi2]->converter->id = "V_MIDI 2";
-
-	sequencer_init();
-	/* printk("Attached v_midi device\n"); */
-}
-
-static inline int __init probe_v_midi(struct address_info *hw_config)
-{
-	return(1);	/* always OK */
-}
-
-
-static void __exit unload_v_midi(struct address_info *hw_config)
-{
-	sound_unload_mididev(midi1);
-	sound_unload_mididev(midi2);
-	kfree(midi_mem);
-}
-
-static struct address_info cfg; /* dummy */
-
-static int __init init_vmidi(void)
-{
-	printk("MIDI Loopback device driver\n");
-	if (!probe_v_midi(&cfg))
-		return -ENODEV;
-	attach_v_midi(&cfg);
-
-	return 0;
-}
-
-static void __exit cleanup_vmidi(void)
-{
-	unload_v_midi(&cfg);
-}
-
-module_init(init_vmidi);
-module_exit(cleanup_vmidi);
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/v_midi.h b/sound/oss/v_midi.h
deleted file mode 100644
index 08e2185ee816..000000000000
--- a/sound/oss/v_midi.h
+++ /dev/null
@@ -1,14 +0,0 @@
-typedef struct vmidi_devc {
-	   int dev;
-
-	/* State variables */
-	   int opened;
-	   spinlock_t lock;
-
-	/* MIDI fields */
-	   int my_mididev;
-	   int pair_mididev;
-	   int input_opened;
-	   int intr_active;
-	   void (*midi_input_intr) (int dev, unsigned char data);
-	} vmidi_devc;
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
deleted file mode 100644
index 92ca5bee1860..000000000000
--- a/sound/oss/vidc.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- *  linux/drivers/sound/vidc.c
- *
- *  Copyright (C) 1997-2000 by Russell King <rmk@arm.linux.org.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  VIDC20 audio driver.
- *
- * The VIDC20 sound hardware consists of the VIDC20 itself, a DAC and a DMA
- * engine.  The DMA transfers fixed-format (16-bit little-endian linear)
- * samples to the VIDC20, which then transfers this data serially to the
- * DACs.  The samplerate is controlled by the VIDC.
- *
- * We currently support a mixer device, but it is currently non-functional.
- */
-
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-
-#include "sound_config.h"
-#include "vidc.h"
-
-#ifndef _SIOC_TYPE
-#define _SIOC_TYPE(x)	_IOC_TYPE(x)
-#endif
-#ifndef _SIOC_NR
-#define _SIOC_NR(x)	_IOC_NR(x)
-#endif
-
-#define VIDC_SOUND_CLOCK	(250000)
-#define VIDC_SOUND_CLOCK_EXT	(176400)
-
-/*
- * When using SERIAL SOUND mode (external DAC), the number of physical
- * channels is fixed at 2.
- */
-static int		vidc_busy;
-static int		vidc_adev;
-static int		vidc_audio_rate;
-static char		vidc_audio_format;
-static char		vidc_audio_channels;
-
-static unsigned char	vidc_level_l[SOUND_MIXER_NRDEVICES] = {
-	85,		/* master	*/
-	50,		/* bass		*/
-	50,		/* treble	*/
-	0,		/* synth	*/
-	75,		/* pcm		*/
-	0,		/* speaker	*/
-	100,		/* ext line	*/
-	0,		/* mic		*/
-	100,		/* CD		*/
-	0,
-};
-
-static unsigned char	vidc_level_r[SOUND_MIXER_NRDEVICES] = {
-	85,		/* master	*/
-	50,		/* bass		*/
-	50,		/* treble	*/
-	0,		/* synth	*/
-	75,		/* pcm		*/
-	0,		/* speaker	*/
-	100,		/* ext line	*/
-	0,		/* mic		*/
-	100,		/* CD		*/
-	0,
-};
-
-static unsigned int	vidc_audio_volume_l;	/* left PCM vol, 0 - 65536 */
-static unsigned int	vidc_audio_volume_r;	/* right PCM vol, 0 - 65536 */
-
-extern void	vidc_update_filler(int bits, int channels);
-extern int	softoss_dev;
-
-static void
-vidc_mixer_set(int mdev, unsigned int level)
-{
-	unsigned int lev_l = level & 0x007f;
-	unsigned int lev_r = (level & 0x7f00) >> 8;
-	unsigned int mlev_l, mlev_r;
-
-	if (lev_l > 100)
-		lev_l = 100;
-	if (lev_r > 100)
-		lev_r = 100;
-
-#define SCALE(lev,master)	((lev) * (master) * 65536 / 10000)
-
-	mlev_l = vidc_level_l[SOUND_MIXER_VOLUME];
-	mlev_r = vidc_level_r[SOUND_MIXER_VOLUME];
-
-	switch (mdev) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_PCM:
-		vidc_level_l[mdev] = lev_l;
-		vidc_level_r[mdev] = lev_r;
-
-		vidc_audio_volume_l = SCALE(lev_l, mlev_l);
-		vidc_audio_volume_r = SCALE(lev_r, mlev_r);
-/*printk("VIDC: PCM vol %05X %05X\n", vidc_audio_volume_l, vidc_audio_volume_r);*/
-		break;
-	}
-#undef SCALE
-}
-
-static int vidc_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
-{
-	unsigned int val;
-	unsigned int mdev;
-
-	if (_SIOC_TYPE(cmd) != 'M')
-		return -EINVAL;
-
-	mdev = _SIOC_NR(cmd);
-
-	if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
-		if (get_user(val, (unsigned int __user *)arg))
-			return -EFAULT;
-
-		if (mdev < SOUND_MIXER_NRDEVICES)
-			vidc_mixer_set(mdev, val);
-		else
-			return -EINVAL;
-	}
-
-	/*
-	 * Return parameters
-	 */
-	switch (mdev) {
-	case SOUND_MIXER_RECSRC:
-		val = 0;
-		break;
-
-	case SOUND_MIXER_DEVMASK:
-		val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH;
-		break;
-
-	case SOUND_MIXER_STEREODEVS:
-		val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH;
-		break;
-
-	case SOUND_MIXER_RECMASK:
-		val = 0;
-		break;
-
-	case SOUND_MIXER_CAPS:
-		val = 0;
-		break;
-
-	default:
-		if (mdev < SOUND_MIXER_NRDEVICES)
-			val = vidc_level_l[mdev] | vidc_level_r[mdev] << 8;
-		else
-			return -EINVAL;
-	}
-
-	return put_user(val, (unsigned int __user *)arg) ? -EFAULT : 0;
-}
-
-static unsigned int vidc_audio_set_format(int dev, unsigned int fmt)
-{
-	switch (fmt) {
-	default:
-		fmt = AFMT_S16_LE;
-	case AFMT_U8:
-	case AFMT_S8:
-	case AFMT_S16_LE:
-		vidc_audio_format = fmt;
-		vidc_update_filler(vidc_audio_format, vidc_audio_channels);
-	case AFMT_QUERY:
-		break;
-	}
-	return vidc_audio_format;
-}
-
-#define my_abs(i) ((i)<0 ? -(i) : (i))
-
-static int vidc_audio_set_speed(int dev, int rate)
-{
-	if (rate) {
-		unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext;
-		unsigned int diff_int, diff_ext;
-		unsigned int newsize, new2size;
-
-		hwctrl = 0x00000003;
-
-		/* Using internal clock */
-		hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1;
-		if (hwrate < 3)
-			hwrate = 3;
-		if (hwrate > 255)
-			hwrate = 255;
-
-		/* Using exernal clock */
-		hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1;
-		if (hwrate_ext < 3)
-			hwrate_ext = 3;
-		if (hwrate_ext > 255)
-			hwrate_ext = 255;
-
-		rate_int = VIDC_SOUND_CLOCK / hwrate;
-		rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext;
-
-		/* Chose between external and internal clock */
-		diff_int = my_abs(rate_ext-rate);
-		diff_ext = my_abs(rate_int-rate);
-		if (diff_ext < diff_int) {
-			/*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/
-			hwrate=hwrate_ext;
-			hwctrl=0x00000002;
-			/* Allow roughly 0.4% tolerance */
-			if (diff_ext > (rate/256))
-				rate=rate_ext;
-		} else {
-			/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
-			hwctrl=0x00000003;
-			/* Allow roughly 0.4% tolerance */
-			if (diff_int > (rate/256))
-				rate=rate_int;
-		}
-
-		vidc_writel(0xb0000000 | (hwrate - 2));
-		vidc_writel(0xb1000000 | hwctrl);
-
-		newsize = (10000 / hwrate) & ~3;
-		if (newsize < 208)
-			newsize = 208;
-		if (newsize > 4096)
-			newsize = 4096;
-		for (new2size = 128; new2size < newsize; new2size <<= 1);
-		if (new2size - newsize > newsize - (new2size >> 1))
-			new2size >>= 1;
-		if (new2size > 4096) {
-			printk(KERN_ERR "VIDC: error: dma buffer (%d) %d > 4K\n",
-				newsize, new2size);
-			new2size = 4096;
-		}
-		/*printk("VIDC: dma size %d\n", new2size);*/
-		dma_bufsize = new2size;
-		vidc_audio_rate = rate;
-	}
-	return vidc_audio_rate;
-}
-
-static short vidc_audio_set_channels(int dev, short channels)
-{
-	switch (channels) {
-	default:
-		channels = 2;
-	case 1:
-	case 2:
-		vidc_audio_channels = channels;
-		vidc_update_filler(vidc_audio_format, vidc_audio_channels);
-	case 0:
-		break;
-	}
-	return vidc_audio_channels;
-}
-
-/*
- * Open the device
- */
-static int vidc_audio_open(int dev, int mode)
-{
-	/* This audio device does not have recording capability */
-	if (mode == OPEN_READ)
-		return -EPERM;
-
-	if (vidc_busy)
-		return -EBUSY;
-
-	vidc_busy = 1;
-	return 0;
-}
-
-/*
- * Close the device
- */
-static void vidc_audio_close(int dev)
-{
-	vidc_busy = 0;
-}
-
-/*
- * Output a block via DMA to sound device.
- *
- * We just set the DMA start and count; the DMA interrupt routine
- * will take care of formatting the samples (via the appropriate
- * vidc_filler routine), and flag via vidc_audio_dma_interrupt when
- * more data is required.
- */
-static void
-vidc_audio_output_block(int dev, unsigned long buf, int total_count, int one)
-{
-	struct dma_buffparms *dmap = audio_devs[dev]->dmap_out;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	dma_start = buf - (unsigned long)dmap->raw_buf_phys + (unsigned long)dmap->raw_buf;
-	dma_count = total_count;
-	local_irq_restore(flags);
-}
-
-static void
-vidc_audio_start_input(int dev, unsigned long buf, int count, int intrflag)
-{
-}
-
-static int vidc_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	return -EINVAL;
-}
-
-static irqreturn_t vidc_audio_dma_interrupt(void)
-{
-	DMAbuf_outputintr(vidc_adev, 1);
-	return IRQ_HANDLED;
-}
-
-/*
- * Prepare for outputting samples.
- *
- * Each buffer that will be passed will be `bsize' bytes long,
- * with a total of `bcount' buffers.
- */
-static int vidc_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	struct audio_operations *adev = audio_devs[dev];
-
-	dma_interrupt = NULL;
-	adev->dmap_out->flags |= DMA_NODMA;
-
-	return 0;
-}
-
-/*
- * Stop our current operation.
- */
-static void vidc_audio_reset(int dev)
-{
-	dma_interrupt = NULL;
-}
-
-static int vidc_audio_local_qlen(int dev)
-{
-	return /*dma_count !=*/ 0;
-}
-
-static void vidc_audio_trigger(int dev, int enable_bits)
-{
-	struct audio_operations *adev = audio_devs[dev];
-
-	if (enable_bits & PCM_ENABLE_OUTPUT) {
-		if (!(adev->dmap_out->flags & DMA_ACTIVE)) {
-			unsigned long flags;
-
-			local_irq_save(flags);
-
-			/* prevent recusion */
-			adev->dmap_out->flags |= DMA_ACTIVE;
-
-			dma_interrupt = vidc_audio_dma_interrupt;
-			vidc_sound_dma_irq(0, NULL);
-			iomd_writeb(DMA_CR_E | 0x10, IOMD_SD0CR);
-
-			local_irq_restore(flags);
-		}
-	}
-}
-
-static struct audio_driver vidc_audio_driver =
-{
-	.owner			= THIS_MODULE,
-	.open			= vidc_audio_open,
-	.close			= vidc_audio_close,
-	.output_block		= vidc_audio_output_block,
-	.start_input		= vidc_audio_start_input,
-	.prepare_for_input	= vidc_audio_prepare_for_input,
-	.prepare_for_output	= vidc_audio_prepare_for_output,
-	.halt_io		= vidc_audio_reset,
-	.local_qlen		= vidc_audio_local_qlen,
-	.trigger		= vidc_audio_trigger,
-	.set_speed		= vidc_audio_set_speed,
-	.set_bits		= vidc_audio_set_format,
-	.set_channels		= vidc_audio_set_channels
-};
-
-static struct mixer_operations vidc_mixer_operations = {
-	.owner		= THIS_MODULE,
-	.id		= "VIDC",
-	.name		= "VIDCsound",
-	.ioctl		= vidc_mixer_ioctl
-};
-
-void vidc_update_filler(int format, int channels)
-{
-#define TYPE(fmt,ch) (((fmt)<<2) | ((ch)&3))
-
-	switch (TYPE(format, channels)) {
-	default:
-	case TYPE(AFMT_U8, 1):
-		vidc_filler = vidc_fill_1x8_u;
-		break;
-
-	case TYPE(AFMT_U8, 2):
-		vidc_filler = vidc_fill_2x8_u;
-		break;
-
-	case TYPE(AFMT_S8, 1):
-		vidc_filler = vidc_fill_1x8_s;
-		break;
-
-	case TYPE(AFMT_S8, 2):
-		vidc_filler = vidc_fill_2x8_s;
-		break;
-
-	case TYPE(AFMT_S16_LE, 1):
-		vidc_filler = vidc_fill_1x16_s;
-		break;
-
-	case TYPE(AFMT_S16_LE, 2):
-		vidc_filler = vidc_fill_2x16_s;
-		break;
-	}
-}
-
-static void __init attach_vidc(struct address_info *hw_config)
-{
-	char name[32];
-	int i, adev;
-
-	sprintf(name, "VIDC %d-bit sound", hw_config->card_subtype);
-	conf_printf(name, hw_config);
-	memset(dma_buf, 0, sizeof(dma_buf));
-
-	adev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, name,
-			&vidc_audio_driver, sizeof(vidc_audio_driver),
-			DMA_AUTOMODE, AFMT_U8 | AFMT_S8 | AFMT_S16_LE,
-			NULL, hw_config->dma, hw_config->dma2);
-
-	if (adev < 0)
-		goto audio_failed;
-
-	/*
-	 * 1024 bytes => 64 buffers
-	 */
-	audio_devs[adev]->min_fragment = 10;
-	audio_devs[adev]->mixer_dev = num_mixers;
-
-	audio_devs[adev]->mixer_dev =
-		sound_install_mixer(MIXER_DRIVER_VERSION,
-				name, &vidc_mixer_operations,
-				sizeof(vidc_mixer_operations), NULL);
-
-	if (audio_devs[adev]->mixer_dev < 0)
-		goto mixer_failed;
-
-	for (i = 0; i < 2; i++) {
-		dma_buf[i] = get_zeroed_page(GFP_KERNEL);
-		if (!dma_buf[i]) {
-			printk(KERN_ERR "%s: can't allocate required buffers\n",
-				name);
-			goto mem_failed;
-		}
-		dma_pbuf[i] = virt_to_phys((void *)dma_buf[i]);
-	}
-
-	if (sound_alloc_dma(hw_config->dma, hw_config->name)) {
-		printk(KERN_ERR "%s: DMA %d is in  use\n", name, hw_config->dma);
-		goto dma_failed;
-	}
-
-	if (request_irq(hw_config->irq, vidc_sound_dma_irq, 0,
-			hw_config->name, &dma_start)) {
-		printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq);
-		goto irq_failed;
-	}
-	vidc_adev = adev;
-	vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
-
-	return;
-
-irq_failed:
-	sound_free_dma(hw_config->dma);
-dma_failed:
-mem_failed:
-	for (i = 0; i < 2; i++)
-		free_page(dma_buf[i]);
-	sound_unload_mixerdev(audio_devs[adev]->mixer_dev);
-mixer_failed:
-	sound_unload_audiodev(adev);
-audio_failed:
-	return;
-}
-
-static int __init probe_vidc(struct address_info *hw_config)
-{
-	hw_config->irq		= IRQ_DMAS0;
-	hw_config->dma		= DMA_VIRTUAL_SOUND;
-	hw_config->dma2		= -1;
-	hw_config->card_subtype	= 16;
-	hw_config->name		= "VIDC20";
-	return 1;
-}
-
-static void __exit unload_vidc(struct address_info *hw_config)
-{
-	int i, adev = vidc_adev;
-
-	vidc_adev = -1;
-
-	free_irq(hw_config->irq, &dma_start);
-	sound_free_dma(hw_config->dma);
-
-	if (adev >= 0) {
-		sound_unload_mixerdev(audio_devs[adev]->mixer_dev);
-		sound_unload_audiodev(adev);
-		for (i = 0; i < 2; i++)
-			free_page(dma_buf[i]);
-	}
-}
-
-static struct address_info cfg;
-
-static int __init init_vidc(void)
-{
-	if (probe_vidc(&cfg) == 0)
-		return -ENODEV;
-
-	attach_vidc(&cfg);
-
-	return 0;
-}
-
-static void __exit cleanup_vidc(void)
-{
-	unload_vidc(&cfg);
-}
-
-module_init(init_vidc);
-module_exit(cleanup_vidc);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("VIDC20 audio driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/vidc.h b/sound/oss/vidc.h
deleted file mode 100644
index 0d1424751ecd..000000000000
--- a/sound/oss/vidc.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/drivers/sound/vidc.h
- *
- *  Copyright (C) 1997 Russell King <rmk@arm.linux.org.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  VIDC sound function prototypes
- */
-
-/* vidc_fill.S */
-
-/*
- * Filler routines for different channels and sample sizes
- */
-
-extern unsigned long vidc_fill_1x8_u(unsigned long ibuf, unsigned long iend,
-				     unsigned long obuf, int mask);
-extern unsigned long vidc_fill_2x8_u(unsigned long ibuf, unsigned long iend,
-				     unsigned long obuf, int mask);
-extern unsigned long vidc_fill_1x8_s(unsigned long ibuf, unsigned long iend,
-				     unsigned long obuf, int mask);
-extern unsigned long vidc_fill_2x8_s(unsigned long ibuf, unsigned long iend,
-				     unsigned long obuf, int mask);
-extern unsigned long vidc_fill_1x16_s(unsigned long ibuf, unsigned long iend,
-				      unsigned long obuf, int mask);
-extern unsigned long vidc_fill_2x16_s(unsigned long ibuf, unsigned long iend,
-				      unsigned long obuf, int mask);
-
-/*
- * DMA Interrupt handler
- */
-
-extern irqreturn_t vidc_sound_dma_irq(int irqnr, void *ref);
-
-/*
- * Filler routine pointer
- */
-
-extern unsigned long (*vidc_filler) (unsigned long ibuf, unsigned long iend,
-				     unsigned long obuf, int mask);
-
-/*
- * Virtual DMA buffer exhausted
- */
-
-extern irqreturn_t (*dma_interrupt) (void);
-
-/*
- * Virtual DMA buffer addresses
- */
-
-extern unsigned long dma_start, dma_count, dma_bufsize;
-extern unsigned long dma_buf[2], dma_pbuf[2];
-
-/* vidc_synth.c */
-
-extern void     vidc_synth_init(struct address_info *hw_config);
-extern void	vidc_synth_exit(struct address_info *hw_config);
-extern int      vidc_synth_get_volume(void);
-extern int      vidc_synth_set_volume(int vol);
diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S
deleted file mode 100644
index bed34921d176..000000000000
--- a/sound/oss/vidc_fill.S
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- *  linux/drivers/sound/vidc_fill.S
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Filler routines for DMA buffers
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-
-		.text
-
-ENTRY(vidc_fill_1x8_u)
-		mov	ip, #0xff00
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldrb	r4, [r0], #1
-		eor	r4, r4, #0x80
-		and	r4, ip, r4, lsl #8
-		orr	r4, r4, r4, lsl #16
-		str	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_2x8_u)
-		mov	ip, #0xff00
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldr	r4, [r0], #2
-		and	r5, r4, ip
-		and	r4, ip, r4, lsl #8
-		orr	r4, r4, r5, lsl #16
-		orr	r4, r4, r4, lsr #8
-		str	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_1x8_s)
-		mov	ip, #0xff00
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldrb	r4, [r0], #1
-		and	r4, ip, r4, lsl #8
-		orr	r4, r4, r4, lsl #16
-		str	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_2x8_s)
-		mov	ip, #0xff00
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldr	r4, [r0], #2
-		and	r5, r4, ip
-		and	r4, ip, r4, lsl #8
-		orr	r4, r4, r5, lsl #16
-		orr	r4, r4, r4, lsr #8
-		str	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_1x16_s)
-		mov	ip, #0xff00
-		orr	ip, ip, ip, lsr #8
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldr	r5, [r0], #2
-		and	r4, r5, ip
-		orr	r4, r4, r4, lsl #16
-		str	r4, [r2], #4
-		cmp	r0, r1
-		addlt	r0, r0, #2
-		andlt	r4, r5, ip, lsl #16
-		orrlt	r4, r4, r4, lsr #16
-		strlt	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_2x16_s)
-		mov	ip, #0xff00
-		orr	ip, ip, ip, lsr #8
-1:		cmp	r0, r1
-		bge	vidc_clear
-		ldr	r4, [r0], #4
-		str	r4, [r2], #4
-		cmp	r0, r1
-		ldrlt	r4, [r0], #4
-		strlt	r4, [r2], #4
-		cmp	r2, r3
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_fill_noaudio)
-		mov	r0, #0
-		mov	r1, #0
-2:		mov	r4, #0
-		mov	r5, #0
-1:		cmp	r2, r3
-		stmltia	r2!, {r0, r1, r4, r5}
-		blt	1b
-		mov	pc, lr
-
-ENTRY(vidc_clear)
-		mov	r0, #0
-		mov	r1, #0
-		tst	r2, #4
-		str	r0, [r2], #4
-		tst	r2, #8
-		stmia	r2!, {r0, r1}
-		b	2b
-
-/*
- * Call filler routines with:
- *  r0 = phys address
- *  r1 = phys end
- *  r2 = buffer
- * Returns:
- *  r0 = new buffer address
- *  r2 = new buffer finish
- *  r4 = corrupted
- *  r5 = corrupted
- *  ip = corrupted
- */
-
-ENTRY(vidc_sound_dma_irq)
-		stmfd	sp!, {r4 - r8, lr}
-		ldr	r8, =dma_start
-		ldmia	r8, {r0, r1, r2, r3, r4, r5}
-		teq	r1, #0
-		adreq	r4, vidc_fill_noaudio
-		moveq	r7, #1 << 31
-		movne	r7, #0
-		mov	ip, #IOMD_BASE & 0xff000000
-		orr	ip, ip, #IOMD_BASE & 0x00ff0000
-		ldrb	r6, [ip, #IOMD_SD0ST]
-		tst	r6, #DMA_ST_OFL			@ Check for overrun
-		eorne	r6, r6, #DMA_ST_AB
-		tst	r6, #DMA_ST_AB
-		moveq	r2, r3				@ DMAing A, update B
-		add	r3, r2, r5			@ End of DMA buffer
-		add	r1, r1, r0			@ End of virtual DMA buffer
-		mov	lr, pc
-		mov	pc, r4				@ Call fill routine (uses r4, ip)
-		sub	r1, r1, r0			@ Remaining length
-		stmia	r8, {r0, r1}
-		mov	r0, #0
-		tst	r2, #4				@ Round buffer up to 4 words
-		strne	r0, [r2], #4
-		tst	r2, #8
-		strne	r0, [r2], #4
-		strne	r0, [r2], #4
-		sub	r2, r2, #16
-		mov	r2, r2, lsl #20
-		movs	r2, r2, lsr #20
-		orreq	r2, r2, #1 << 30		@ Set L bit
-		orr	r2, r2, r7
-		ldmdb	r8, {r3, r4, r5}
-		tst	r6, #DMA_ST_AB
-		mov	ip, #IOMD_BASE & 0xff000000
-		orr	ip, ip, #IOMD_BASE & 0x00ff0000
-		streq	r4, [ip, #IOMD_SD0CURB]
-		strne	r5, [ip, #IOMD_SD0CURA]
-		streq	r2, [ip, #IOMD_SD0ENDB]
-		strne	r2, [ip, #IOMD_SD0ENDA]
-		ldr	lr, [ip, #IOMD_SD0ST]
-		tst	lr, #DMA_ST_OFL
-		bne	1f
-		tst	r6, #DMA_ST_AB
-		strne	r4, [ip, #IOMD_SD0CURB]
-		streq	r5, [ip, #IOMD_SD0CURA]
-		strne	r2, [ip, #IOMD_SD0ENDB]
-		streq	r2, [ip, #IOMD_SD0ENDA]
-1:		teq	r7, #0
-		mov	r0, #0x10
-		strneb	r0, [ip, #IOMD_SD0CR]
-		ldmfd	sp!, {r4 - r8, lr}
-		mov	r0, #1				@ IRQ_HANDLED
-		teq	r1, #0				@ If we have no more
-		movne	pc, lr
-		teq	r3, #0
-		movne	pc, r3				@ Call interrupt routine
-		mov	pc, lr
-
-		.data
-		.globl	dma_interrupt
-dma_interrupt:
-		.long	0				@ r3
-		.globl	dma_pbuf
-dma_pbuf:
-		.long	0				@ r4
-		.long	0				@ r5
-		.globl	dma_start
-dma_start:
-		.long	0				@ r0
-		.globl	dma_count
-dma_count:
-		.long	0				@ r1
-		.globl	dma_buf
-dma_buf:
-		.long	0				@ r2
-		.long	0				@ r3
-		.globl	vidc_filler
-vidc_filler:
-		.long	vidc_fill_noaudio		@ r4
-		.globl	dma_bufsize
-dma_bufsize:
-		.long	0x1000				@ r5
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
deleted file mode 100644
index 4f0c3a232e41..000000000000
--- a/sound/oss/waveartist.c
+++ /dev/null
@@ -1,2043 +0,0 @@
-/*
- * linux/sound/oss/waveartist.c
- *
- * The low level driver for the RWA010 Rockwell Wave Artist
- * codec chip used in the Rebel.com NetWinder.
- *
- * Cleaned up and integrated into 2.1 by Russell King (rmk@arm.linux.org.uk)
- * and Pat Beirne (patb@corel.ca)
- *
- *
- * Copyright (C) by Rebel.com 1998-1999
- *
- * RWA010 specs received under NDA from Rockwell
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Changes:
- * 11-10-2000	Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
- *		Added __init to waveartist_init()
- */
-
-/* Debugging */
-#define DEBUG_CMD	1
-#define DEBUG_OUT	2
-#define DEBUG_IN	4
-#define DEBUG_INTR	8
-#define DEBUG_MIXER	16
-#define DEBUG_TRIGGER	32
-
-#define debug_flg (0)
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-
-#include "sound_config.h"
-#include "waveartist.h"
-
-#ifdef CONFIG_ARM
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#endif
-
-#ifndef NO_DMA
-#define NO_DMA	255
-#endif
-
-#define SUPPORTED_MIXER_DEVICES		(SOUND_MASK_SYNTH      |\
-					 SOUND_MASK_PCM        |\
-					 SOUND_MASK_LINE       |\
-					 SOUND_MASK_MIC        |\
-					 SOUND_MASK_LINE1      |\
-					 SOUND_MASK_RECLEV     |\
-					 SOUND_MASK_VOLUME     |\
-					 SOUND_MASK_IMIX)
-
-static unsigned short levels[SOUND_MIXER_NRDEVICES] = {
-	0x5555,		/* Master Volume	 */
-	0x0000,		/* Bass			 */
-	0x0000,		/* Treble		 */
-	0x2323,		/* Synth (FM)		 */
-	0x4b4b,		/* PCM			 */
-	0x6464,		/* PC Speaker		 */
-	0x0000,		/* Ext Line		 */
-	0x0000,		/* Mic			 */
-	0x0000,		/* CD			 */
-	0x6464,		/* Recording monitor	 */
-	0x0000,		/* SB PCM (ALT PCM)	 */
-	0x0000,		/* Recording level	 */
-	0x6464,		/* Input gain		 */
-	0x6464,		/* Output gain		 */
-	0x0000,		/* Line1 (Aux1)		 */
-	0x0000,		/* Line2 (Aux2)		 */
-	0x0000,		/* Line3 (Aux3)		 */
-	0x0000,		/* Digital1		 */
-	0x0000,		/* Digital2		 */
-	0x0000,		/* Digital3		 */
-	0x0000,		/* Phone In		 */
-	0x6464,		/* Phone Out		 */
-	0x0000,		/* Video		 */
-	0x0000,		/* Radio		 */
-	0x0000		/* Monitor		 */
-};
-
-struct wavnc_info {
-	struct address_info  hw;	/* hardware */
-	char		*chip_name;
-
-	int		xfer_count;
-	int		audio_mode;
-	int		open_mode;
-	int		audio_flags;
-	int		record_dev;
-	int		playback_dev;
-	int		dev_no;
-
-	/* Mixer parameters */
-	const struct waveartist_mixer_info *mix;
-
-	unsigned short	*levels;	   /* cache of volume settings   */
-	int		recmask;	   /* currently enabled recording device! */
-
-#ifdef CONFIG_ARCH_NETWINDER
-	signed int	slider_vol;	   /* hardware slider volume     */
-	unsigned int	handset_detect	:1;
-	unsigned int	telephone_detect:1;
-	unsigned int	no_autoselect	:1;/* handset/telephone autoselects a path */
-	unsigned int	spkr_mute_state	:1;/* set by ioctl or autoselect */
-	unsigned int	line_mute_state	:1;/* set by ioctl or autoselect */
-	unsigned int	use_slider	:1;/* use slider setting for o/p vol */
-#endif
-};
-
-/*
- * This is the implementation specific mixer information.
- */
-struct waveartist_mixer_info {
-	unsigned int	supported_devs;	   /* Supported devices */
-	unsigned int	recording_devs;	   /* Recordable devies */
-	unsigned int	stereo_devs;	   /* Stereo devices	*/
-
-	unsigned int	(*select_input)(struct wavnc_info *, unsigned int,
-					unsigned char *, unsigned char *);
-	int		(*decode_mixer)(struct wavnc_info *, int,
-					unsigned char, unsigned char);
-	int		(*get_mixer)(struct wavnc_info *, int);
-};
-
-struct wavnc_port_info {
-	int		open_mode;
-	int		speed;
-	int		channels;
-	int		audio_format;
-};
-
-static int		nr_waveartist_devs;
-static struct wavnc_info	adev_info[MAX_AUDIO_DEV];
-static DEFINE_SPINLOCK(waveartist_lock);
-
-#ifndef CONFIG_ARCH_NETWINDER
-#define machine_is_netwinder() 0
-#else
-static struct timer_list vnc_timer;
-static void vnc_configure_mixer(struct wavnc_info *devc,
-				unsigned int input_mask);
-static int vnc_private_ioctl(int dev, unsigned int cmd, int __user *arg);
-static void vnc_slider_tick(unsigned long data);
-#endif
-
-static inline void
-waveartist_set_ctlr(struct address_info *hw, unsigned char clear, unsigned char set)
-{
-	unsigned int ctlr_port = hw->io_base + CTLR;
-
-	clear = ~clear & inb(ctlr_port);
-
-	outb(clear | set, ctlr_port);
-}
-
-/* Toggle IRQ acknowledge line
- */
-static inline void
-waveartist_iack(struct wavnc_info *devc)
-{
-	unsigned int ctlr_port = devc->hw.io_base + CTLR;
-	int old_ctlr;
-
-	old_ctlr = inb(ctlr_port) & ~IRQ_ACK;
-
-	outb(old_ctlr | IRQ_ACK, ctlr_port);
-	outb(old_ctlr, ctlr_port);
-}
-
-static inline int
-waveartist_sleep(int timeout_ms)
-{
-	unsigned int timeout = msecs_to_jiffies(timeout_ms*100);
-	return schedule_timeout_interruptible(timeout);
-}
-
-static int
-waveartist_reset(struct wavnc_info *devc)
-{
-	struct address_info *hw = &devc->hw;
-	unsigned int timeout, res = -1;
-
-	waveartist_set_ctlr(hw, -1, RESET);
-	waveartist_sleep(2);
-	waveartist_set_ctlr(hw, RESET, 0);
-
-	timeout = 500;
-	do {
-		mdelay(2);
-
-		if (inb(hw->io_base + STATR) & CMD_RF) {
-			res = inw(hw->io_base + CMDR);
-			if (res == 0x55aa)
-				break;
-		}
-	} while (--timeout);
-
-	if (timeout == 0) {
-		printk(KERN_WARNING "WaveArtist: reset timeout ");
-		if (res != (unsigned int)-1)
-			printk("(res=%04X)", res);
-		printk("\n");
-		return 1;
-	}
-	return 0;
-}
-
-/* Helper function to send and receive words
- * from WaveArtist.  It handles all the handshaking
- * and can send or receive multiple words.
- */
-static int
-waveartist_cmd(struct wavnc_info *devc,
-		int nr_cmd, unsigned int *cmd,
-		int nr_resp, unsigned int *resp)
-{
-	unsigned int io_base = devc->hw.io_base;
-	unsigned int timed_out = 0;
-	unsigned int i;
-
-	if (debug_flg & DEBUG_CMD) {
-		printk("waveartist_cmd: cmd=");
-
-		for (i = 0; i < nr_cmd; i++)
-			printk("%04X ", cmd[i]);
-
-		printk("\n");
-	}
-
-	if (inb(io_base + STATR) & CMD_RF) {
-		int old_data;
-
-		/* flush the port
-		 */
-
-		old_data = inw(io_base + CMDR);
-
-		if (debug_flg & DEBUG_CMD)
-			printk("flushed %04X...", old_data);
-
-		udelay(10);
-	}
-
-	for (i = 0; !timed_out && i < nr_cmd; i++) {
-		int count;
-
-		for (count = 5000; count; count--)
-			if (inb(io_base + STATR) & CMD_WE)
-				break;
-
-		if (!count)
-			timed_out = 1;
-		else
-			outw(cmd[i], io_base + CMDR);
-	}
-
-	for (i = 0; !timed_out && i < nr_resp; i++) {
-		int count;
-
-		for (count = 5000; count; count--)
-			if (inb(io_base + STATR) & CMD_RF)
-				break;
-
-		if (!count)
-			timed_out = 1;
-		else
-			resp[i] = inw(io_base + CMDR);
-	}
-
-	if (debug_flg & DEBUG_CMD) {
-		if (!timed_out) {
-			printk("waveartist_cmd: resp=");
-
-			for (i = 0; i < nr_resp; i++)
-				printk("%04X ", resp[i]);
-
-			printk("\n");
-		} else
-			printk("waveartist_cmd: timed out\n");
-	}
-
-	return timed_out ? 1 : 0;
-}
-
-/*
- * Send one command word
- */
-static inline int
-waveartist_cmd1(struct wavnc_info *devc, unsigned int cmd)
-{
-	return waveartist_cmd(devc, 1, &cmd, 0, NULL);
-}
-
-/*
- * Send one command, receive one word
- */
-static inline unsigned int
-waveartist_cmd1_r(struct wavnc_info *devc, unsigned int cmd)
-{
-	unsigned int ret;
-
-	waveartist_cmd(devc, 1, &cmd, 1, &ret);
-
-	return ret;
-}
-
-/*
- * Send a double command, receive one
- * word (and throw it away)
- */
-static inline int
-waveartist_cmd2(struct wavnc_info *devc, unsigned int cmd, unsigned int arg)
-{
-	unsigned int vals[2];
-
-	vals[0] = cmd;
-	vals[1] = arg;
-
-	return waveartist_cmd(devc, 2, vals, 1, vals);
-}
-
-/*
- * Send a triple command
- */
-static inline int
-waveartist_cmd3(struct wavnc_info *devc, unsigned int cmd,
-		unsigned int arg1, unsigned int arg2)
-{
-	unsigned int vals[3];
-
-	vals[0] = cmd;
-	vals[1] = arg1;
-	vals[2] = arg2;
-
-	return waveartist_cmd(devc, 3, vals, 0, NULL);
-}
-
-static int
-waveartist_getrev(struct wavnc_info *devc, char *rev)
-{
-	unsigned int temp[2];
-	unsigned int cmd = WACMD_GETREV;
-
-	waveartist_cmd(devc, 1, &cmd, 2, temp);
-
-	rev[0] = temp[0] >> 8;
-	rev[1] = temp[0] & 255;
-	rev[2] = '\0';
-
-	return temp[0];
-}
-
-static void waveartist_halt_output(int dev);
-static void waveartist_halt_input(int dev);
-static void waveartist_halt(int dev);
-static void waveartist_trigger(int dev, int state);
-
-static int
-waveartist_open(int dev, int mode)
-{
-	struct wavnc_info	*devc;
-	struct wavnc_port_info	*portc;
-	unsigned long	flags;
-
-	if (dev < 0 || dev >= num_audiodevs)
-		return -ENXIO;
-
-	devc  = (struct wavnc_info *) audio_devs[dev]->devc;
-	portc = (struct wavnc_port_info *) audio_devs[dev]->portc;
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-	if (portc->open_mode || (devc->open_mode & mode)) {
-		spin_unlock_irqrestore(&waveartist_lock, flags);
-		return -EBUSY;
-	}
-
-	devc->audio_mode  = 0;
-	devc->open_mode  |= mode;
-	portc->open_mode  = mode;
-	waveartist_trigger(dev, 0);
-
-	if (mode & OPEN_READ)
-		devc->record_dev = dev;
-	if (mode & OPEN_WRITE)
-		devc->playback_dev = dev;
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-
-	return 0;
-}
-
-static void
-waveartist_close(int dev)
-{
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	waveartist_halt(dev);
-
-	devc->audio_mode = 0;
-	devc->open_mode &= ~portc->open_mode;
-	portc->open_mode = 0;
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static void
-waveartist_output_block(int dev, unsigned long buf, int __count, int intrflag)
-{
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	unsigned long	flags;
-	unsigned int	count = __count; 
-
-	if (debug_flg & DEBUG_OUT)
-		printk("waveartist: output block, buf=0x%lx, count=0x%x...\n",
-			buf, count);
-	/*
-	 * 16 bit data
-	 */
-	if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))
-		count >>= 1;
-
-	if (portc->channels > 1)
-		count >>= 1;
-
-	count -= 1;
-
-	if (devc->audio_mode & PCM_ENABLE_OUTPUT &&
-	    audio_devs[dev]->flags & DMA_AUTOMODE &&
-	    intrflag &&
-	    count == devc->xfer_count) {
-		devc->audio_mode |= PCM_ENABLE_OUTPUT;
-		return;	/*
-			 * Auto DMA mode on. No need to react
-			 */
-	}
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	/*
-	 * set sample count
-	 */
-	waveartist_cmd2(devc, WACMD_OUTPUTSIZE, count);
-
-	devc->xfer_count = count;
-	devc->audio_mode |= PCM_ENABLE_OUTPUT;
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static void
-waveartist_start_input(int dev, unsigned long buf, int __count, int intrflag)
-{
-	struct wavnc_port_info *portc = (struct wavnc_port_info *)
-					audio_devs[dev]->portc;
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	unsigned long	flags;
-	unsigned int	count = __count;
-
-	if (debug_flg & DEBUG_IN)
-		printk("waveartist: start input, buf=0x%lx, count=0x%x...\n",
-			buf, count);
-
-	if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))	/* 16 bit data */
-		count >>= 1;
-
-	if (portc->channels > 1)
-		count >>= 1;
-
-	count -= 1;
-
-	if (devc->audio_mode & PCM_ENABLE_INPUT &&
-	    audio_devs[dev]->flags & DMA_AUTOMODE &&
-	    intrflag &&
-	    count == devc->xfer_count) {
-		devc->audio_mode |= PCM_ENABLE_INPUT;
-		return;	/*
-			 * Auto DMA mode on. No need to react
-			 */
-	}
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	/*
-	 * set sample count
-	 */
-	waveartist_cmd2(devc, WACMD_INPUTSIZE, count);
-
-	devc->xfer_count = count;
-	devc->audio_mode |= PCM_ENABLE_INPUT;
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static int
-waveartist_ioctl(int dev, unsigned int cmd, void __user * arg)
-{
-	return -EINVAL;
-}
-
-static unsigned int
-waveartist_get_speed(struct wavnc_port_info *portc)
-{
-	unsigned int speed;
-
-	/*
-	 * program the speed, channels, bits
-	 */
-	if (portc->speed == 8000)
-		speed = 0x2E71;
-	else if (portc->speed == 11025)
-		speed = 0x4000;
-	else if (portc->speed == 22050)
-		speed = 0x8000;
-	else if (portc->speed == 44100)
-		speed = 0x0;
-	else {
-		/*
-		 * non-standard - just calculate
-		 */
-		speed = portc->speed << 16;
-
-		speed = (speed / 44100) & 65535;
-	}
-
-	return speed;
-}
-
-static unsigned int
-waveartist_get_bits(struct wavnc_port_info *portc)
-{
-	unsigned int bits;
-
-	if (portc->audio_format == AFMT_S16_LE)
-		bits = 1;
-	else if (portc->audio_format == AFMT_S8)
-		bits = 0;
-	else
-		bits = 2;	//default AFMT_U8
-
-	return bits;
-}
-
-static int
-waveartist_prepare_for_input(int dev, int bsize, int bcount)
-{
-	unsigned long	flags;
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	unsigned int	speed, bits;
-
-	if (devc->audio_mode)
-		return 0;
-
-	speed = waveartist_get_speed(portc);
-	bits  = waveartist_get_bits(portc);
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	if (waveartist_cmd2(devc, WACMD_INPUTFORMAT, bits))
-		printk(KERN_WARNING "waveartist: error setting the "
-		       "record format to %d\n", portc->audio_format);
-
-	if (waveartist_cmd2(devc, WACMD_INPUTCHANNELS, portc->channels))
-		printk(KERN_WARNING "waveartist: error setting record "
-		       "to %d channels\n", portc->channels);
-
-	/*
-	 * write cmd SetSampleSpeedTimeConstant
-	 */
-	if (waveartist_cmd2(devc, WACMD_INPUTSPEED, speed))
-		printk(KERN_WARNING "waveartist: error setting the record "
-		       "speed to %dHz.\n", portc->speed);
-
-	if (waveartist_cmd2(devc, WACMD_INPUTDMA, 1))
-		printk(KERN_WARNING "waveartist: error setting the record "
-		       "data path to 0x%X\n", 1);
-
-	if (waveartist_cmd2(devc, WACMD_INPUTFORMAT, bits))
-		printk(KERN_WARNING "waveartist: error setting the record "
-		       "format to %d\n", portc->audio_format);
-
-	devc->xfer_count = 0;
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-	waveartist_halt_input(dev);
-
-	if (debug_flg & DEBUG_INTR) {
-		printk("WA CTLR reg: 0x%02X.\n",
-		       inb(devc->hw.io_base + CTLR));
-		printk("WA STAT reg: 0x%02X.\n",
-		       inb(devc->hw.io_base + STATR));
-		printk("WA IRQS reg: 0x%02X.\n",
-		       inb(devc->hw.io_base + IRQSTAT));
-	}
-
-	return 0;
-}
-
-static int
-waveartist_prepare_for_output(int dev, int bsize, int bcount)
-{
-	unsigned long	flags;
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	unsigned int	speed, bits;
-
-	/*
-	 * program the speed, channels, bits
-	 */
-	speed = waveartist_get_speed(portc);
-	bits  = waveartist_get_bits(portc);
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	if (waveartist_cmd2(devc, WACMD_OUTPUTSPEED, speed) &&
-	    waveartist_cmd2(devc, WACMD_OUTPUTSPEED, speed))
-		printk(KERN_WARNING "waveartist: error setting the playback "
-		       "speed to %dHz.\n", portc->speed);
-
-	if (waveartist_cmd2(devc, WACMD_OUTPUTCHANNELS, portc->channels))
-		printk(KERN_WARNING "waveartist: error setting the playback "
-		       "to %d channels\n", portc->channels);
-
-	if (waveartist_cmd2(devc, WACMD_OUTPUTDMA, 0))
-		printk(KERN_WARNING "waveartist: error setting the playback "
-		       "data path to 0x%X\n", 0);
-
-	if (waveartist_cmd2(devc, WACMD_OUTPUTFORMAT, bits))
-		printk(KERN_WARNING "waveartist: error setting the playback "
-		       "format to %d\n", portc->audio_format);
-
-	devc->xfer_count = 0;
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-	waveartist_halt_output(dev);
-
-	if (debug_flg & DEBUG_INTR) {
-		printk("WA CTLR reg: 0x%02X.\n",inb(devc->hw.io_base + CTLR));
-		printk("WA STAT reg: 0x%02X.\n",inb(devc->hw.io_base + STATR));
-		printk("WA IRQS reg: 0x%02X.\n",inb(devc->hw.io_base + IRQSTAT));
-	}
-
-	return 0;
-}
-
-static void
-waveartist_halt(int dev)
-{
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	struct wavnc_info	*devc;
-
-	if (portc->open_mode & OPEN_WRITE)
-		waveartist_halt_output(dev);
-
-	if (portc->open_mode & OPEN_READ)
-		waveartist_halt_input(dev);
-
-	devc = (struct wavnc_info *) audio_devs[dev]->devc;
-	devc->audio_mode = 0;
-}
-
-static void
-waveartist_halt_input(int dev)
-{
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	/*
-	 * Stop capture
-	 */
-	waveartist_cmd1(devc, WACMD_INPUTSTOP);
-
-	devc->audio_mode &= ~PCM_ENABLE_INPUT;
-
-	/*
-	 * Clear interrupt by toggling
-	 * the IRQ_ACK bit in CTRL
-	 */
-	if (inb(devc->hw.io_base + STATR) & IRQ_REQ)
-		waveartist_iack(devc);
-
-//	devc->audio_mode &= ~PCM_ENABLE_INPUT;
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static void
-waveartist_halt_output(int dev)
-{
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	waveartist_cmd1(devc, WACMD_OUTPUTSTOP);
-
-	devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
-
-	/*
-	 * Clear interrupt by toggling
-	 * the IRQ_ACK bit in CTRL
-	 */
-	if (inb(devc->hw.io_base + STATR) & IRQ_REQ)
-		waveartist_iack(devc);
-
-//	devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static void
-waveartist_trigger(int dev, int state)
-{
-	struct wavnc_info	*devc = (struct wavnc_info *)
-					audio_devs[dev]->devc;
-	struct wavnc_port_info	*portc = (struct wavnc_port_info *)
-					 audio_devs[dev]->portc;
-	unsigned long	flags;
-
-	if (debug_flg & DEBUG_TRIGGER) {
-		printk("wavnc: audio trigger ");
-		if (state & PCM_ENABLE_INPUT)
-			printk("in ");
-		if (state & PCM_ENABLE_OUTPUT)
-			printk("out");
-		printk("\n");
-	}
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	state &= devc->audio_mode;
-
-	if (portc->open_mode & OPEN_READ &&
-	    state & PCM_ENABLE_INPUT)
-		/*
-		 * enable ADC Data Transfer to PC
-		 */
-		waveartist_cmd1(devc, WACMD_INPUTSTART);
-
-	if (portc->open_mode & OPEN_WRITE &&
-	    state & PCM_ENABLE_OUTPUT)
-		/*
-		 * enable DAC data transfer from PC
-		 */
-		waveartist_cmd1(devc, WACMD_OUTPUTSTART);
-
-	spin_unlock_irqrestore(&waveartist_lock, flags);
-}
-
-static int
-waveartist_set_speed(int dev, int arg)
-{
-	struct wavnc_port_info *portc = (struct wavnc_port_info *)
-					audio_devs[dev]->portc;
-
-	if (arg <= 0)
-		return portc->speed;
-
-	if (arg < 5000)
-		arg = 5000;
-	if (arg > 44100)
-		arg = 44100;
-
-	portc->speed = arg;
-	return portc->speed;
-
-}
-
-static short
-waveartist_set_channels(int dev, short arg)
-{
-	struct wavnc_port_info *portc = (struct wavnc_port_info *)
-					audio_devs[dev]->portc;
-
-	if (arg != 1 && arg != 2)
-		return portc->channels;
-
-	portc->channels = arg;
-	return arg;
-}
-
-static unsigned int
-waveartist_set_bits(int dev, unsigned int arg)
-{
-	struct wavnc_port_info *portc = (struct wavnc_port_info *)
-					audio_devs[dev]->portc;
-
-	if (arg == 0)
-		return portc->audio_format;
-
-	if ((arg != AFMT_U8) && (arg != AFMT_S16_LE) && (arg != AFMT_S8))
-		arg = AFMT_U8;
-
-	portc->audio_format = arg;
-
-	return arg;
-}
-
-static struct audio_driver waveartist_audio_driver = {
-	.owner			= THIS_MODULE,
-	.open			= waveartist_open,
-	.close			= waveartist_close,
-	.output_block		= waveartist_output_block,
-	.start_input		= waveartist_start_input,
-	.ioctl			= waveartist_ioctl,
-	.prepare_for_input	= waveartist_prepare_for_input,
-	.prepare_for_output	= waveartist_prepare_for_output,
-	.halt_io		= waveartist_halt,
-	.halt_input		= waveartist_halt_input,
-	.halt_output		= waveartist_halt_output,
-	.trigger		= waveartist_trigger,
-	.set_speed		= waveartist_set_speed,
-	.set_bits		= waveartist_set_bits,
-	.set_channels		= waveartist_set_channels
-};
-
-
-static irqreturn_t
-waveartist_intr(int irq, void *dev_id)
-{
-	struct wavnc_info *devc = dev_id;
-	int	   irqstatus, status;
-
-	spin_lock(&waveartist_lock);
-	irqstatus = inb(devc->hw.io_base + IRQSTAT);
-	status    = inb(devc->hw.io_base + STATR);
-
-	if (debug_flg & DEBUG_INTR)
-		printk("waveartist_intr: stat=%02x, irqstat=%02x\n",
-		       status, irqstatus);
-
-	if (status & IRQ_REQ)	/* Clear interrupt */
-		waveartist_iack(devc);
-	else
-		printk(KERN_WARNING "waveartist: unexpected interrupt\n");
-
-	if (irqstatus & 0x01) {
-		int temp = 1;
-
-		/* PCM buffer done
-		 */
-		if ((status & DMA0) && (devc->audio_mode & PCM_ENABLE_OUTPUT)) {
-			DMAbuf_outputintr(devc->playback_dev, 1);
-			temp = 0;
-		}
-		if ((status & DMA1) && (devc->audio_mode & PCM_ENABLE_INPUT)) {
-			DMAbuf_inputintr(devc->record_dev);
-			temp = 0;
-		}
-		if (temp)	//default:
-			printk(KERN_WARNING "waveartist: Unknown interrupt\n");
-	}
-	if (irqstatus & 0x2)
-		// We do not use SB mode natively...
-		printk(KERN_WARNING "waveartist: Unexpected SB interrupt...\n");
-	spin_unlock(&waveartist_lock);
-	return IRQ_HANDLED;
-}
-
-/* -------------------------------------------------------------------------
- * Mixer stuff
- */
-struct mix_ent {
-	unsigned char	reg_l;
-	unsigned char	reg_r;
-	unsigned char	shift;
-	unsigned char	max;
-};
-
-static const struct mix_ent mix_devs[SOUND_MIXER_NRDEVICES] = {
-	{ 2, 6, 1,  7 }, /* SOUND_MIXER_VOLUME   */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_BASS     */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_TREBLE   */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_SYNTH    */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_PCM      */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_SPEAKER  */
-	{ 0, 4, 6, 31 }, /* SOUND_MIXER_LINE     */
-	{ 2, 6, 4,  3 }, /* SOUND_MIXER_MIC      */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_CD       */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_IMIX     */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_ALTPCM   */
-#if 0
-	{ 3, 7, 0, 10 }, /* SOUND_MIXER_RECLEV   */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_IGAIN    */
-#else
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_RECLEV   */
-	{ 3, 7, 0,  7 }, /* SOUND_MIXER_IGAIN    */
-#endif
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_OGAIN    */
-	{ 0, 4, 1, 31 }, /* SOUND_MIXER_LINE1    */
-	{ 1, 5, 6, 31 }, /* SOUND_MIXER_LINE2    */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_LINE3    */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_DIGITAL1 */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_DIGITAL2 */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_DIGITAL3 */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_PHONEIN  */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_PHONEOUT */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_VIDEO    */
-	{ 0, 0, 0,  0 }, /* SOUND_MIXER_RADIO    */
-	{ 0, 0, 0,  0 }  /* SOUND_MIXER_MONITOR  */
-};
-
-static void
-waveartist_mixer_update(struct wavnc_info *devc, int whichDev)
-{
-	unsigned int lev_left, lev_right;
-
-	lev_left  = devc->levels[whichDev] & 0xff;
-	lev_right = devc->levels[whichDev] >> 8;
-
-	if (lev_left > 100)
-		lev_left = 100;
-	if (lev_right > 100)
-		lev_right = 100;
-
-#define SCALE(lev,max)	((lev) * (max) / 100)
-
-	if (machine_is_netwinder() && whichDev == SOUND_MIXER_PHONEOUT)
-		whichDev = SOUND_MIXER_VOLUME;
-
-	if (mix_devs[whichDev].reg_l || mix_devs[whichDev].reg_r) {
-		const struct mix_ent *mix = mix_devs + whichDev;
-		unsigned int mask, left, right;
-
-		mask = mix->max << mix->shift;
-		lev_left  = SCALE(lev_left,  mix->max) << mix->shift;
-		lev_right = SCALE(lev_right, mix->max) << mix->shift;
-
-		/* read left setting */
-		left  = waveartist_cmd1_r(devc, WACMD_GET_LEVEL |
-					       mix->reg_l << 8);
-
-		/* read right setting */
-		right = waveartist_cmd1_r(devc, WACMD_GET_LEVEL |
-						mix->reg_r << 8);
-
-		left  = (left  & ~mask) | (lev_left  & mask);
-		right = (right & ~mask) | (lev_right & mask);
-
-		/* write left,right back */
-		waveartist_cmd3(devc, WACMD_SET_MIXER, left, right);
-	} else {
-		switch(whichDev) {
-		case SOUND_MIXER_PCM:
-			waveartist_cmd3(devc, WACMD_SET_LEVEL,
-					SCALE(lev_left,  32767),
-					SCALE(lev_right, 32767));
-			break;
-
-		case SOUND_MIXER_SYNTH:
-			waveartist_cmd3(devc, 0x0100 | WACMD_SET_LEVEL,
-					SCALE(lev_left,  32767),
-					SCALE(lev_right, 32767));
-			break;
-		}
-	}
-}
-
-/*
- * Set the ADC MUX to the specified values.  We do NOT do any
- * checking of the values passed, since we assume that the
- * relevant *_select_input function has done that for us.
- */
-static void
-waveartist_set_adc_mux(struct wavnc_info *devc, char left_dev,
-		       char right_dev)
-{
-	unsigned int reg_08, reg_09;
-
-	reg_08 = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x0800);
-	reg_09 = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x0900);
-
-	reg_08 = (reg_08 & ~0x3f) | right_dev << 3 | left_dev;
-
-	waveartist_cmd3(devc, WACMD_SET_MIXER, reg_08, reg_09);
-}
-
-/*
- * Decode a recording mask into a mixer selection as follows:
- *
- *     OSS Source	WA Source	Actual source
- *  SOUND_MASK_IMIX	Mixer		Mixer output (same as AD1848)
- *  SOUND_MASK_LINE	Line		Line in
- *  SOUND_MASK_LINE1	Aux 1		Aux 1 in
- *  SOUND_MASK_LINE2	Aux 2		Aux 2 in
- *  SOUND_MASK_MIC	Mic		Microphone
- */
-static unsigned int
-waveartist_select_input(struct wavnc_info *devc, unsigned int recmask,
-			unsigned char *dev_l, unsigned char *dev_r)
-{
-	unsigned int recdev = ADC_MUX_NONE;
-
-	if (recmask & SOUND_MASK_IMIX) {
-		recmask = SOUND_MASK_IMIX;
-		recdev = ADC_MUX_MIXER;
-	} else if (recmask & SOUND_MASK_LINE2) {
-		recmask = SOUND_MASK_LINE2;
-		recdev = ADC_MUX_AUX2;
-	} else if (recmask & SOUND_MASK_LINE1) {
-		recmask = SOUND_MASK_LINE1;
-		recdev = ADC_MUX_AUX1;
-	} else if (recmask & SOUND_MASK_LINE) {
-		recmask = SOUND_MASK_LINE;
-		recdev = ADC_MUX_LINE;
-	} else if (recmask & SOUND_MASK_MIC) {
-		recmask = SOUND_MASK_MIC;
-		recdev = ADC_MUX_MIC;
-	}
-
-	*dev_l = *dev_r = recdev;
-
-	return recmask;
-}
-
-static int
-waveartist_decode_mixer(struct wavnc_info *devc, int dev,
-			unsigned char lev_l,
-			unsigned char lev_r)
-{
-	switch (dev) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_SYNTH:
-	case SOUND_MIXER_PCM:
-	case SOUND_MIXER_LINE:
-	case SOUND_MIXER_MIC:
-	case SOUND_MIXER_IGAIN:
-	case SOUND_MIXER_LINE1:
-	case SOUND_MIXER_LINE2:
-		devc->levels[dev] = lev_l | lev_r << 8;
-		break;
-
-	case SOUND_MIXER_IMIX:
-		break;
-
-	default:
-		dev = -EINVAL;
-		break;
-	}
-
-	return dev;
-}
-
-static int waveartist_get_mixer(struct wavnc_info *devc, int dev)
-{
-	return devc->levels[dev];
-}
-
-static const struct waveartist_mixer_info waveartist_mixer = {
-	.supported_devs	= SUPPORTED_MIXER_DEVICES | SOUND_MASK_IGAIN,
-	.recording_devs	= SOUND_MASK_LINE  | SOUND_MASK_MIC   |
-			SOUND_MASK_LINE1 | SOUND_MASK_LINE2 |
-			SOUND_MASK_IMIX,
-	.stereo_devs	= (SUPPORTED_MIXER_DEVICES | SOUND_MASK_IGAIN) & ~
-			(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX),
-	.select_input	= waveartist_select_input,
-	.decode_mixer	= waveartist_decode_mixer,
-	.get_mixer	= waveartist_get_mixer,
-};
-
-static void
-waveartist_set_recmask(struct wavnc_info *devc, unsigned int recmask)
-{
-	unsigned char dev_l, dev_r;
-
-	recmask &= devc->mix->recording_devs;
-
-	/*
-	 * If more than one recording device selected,
-	 * disable the device that is currently in use.
-	 */
-	if (hweight32(recmask) > 1)
-		recmask &= ~devc->recmask;
-
-	/*
-	 * Translate the recording device mask into
-	 * the ADC multiplexer settings.
-	 */
-	devc->recmask = devc->mix->select_input(devc, recmask,
-						&dev_l, &dev_r);
-
-	waveartist_set_adc_mux(devc, dev_l, dev_r);
-}
-
-static int
-waveartist_set_mixer(struct wavnc_info *devc, int dev, unsigned int level)
-{
-	unsigned int lev_left  = level & 0x00ff;
-	unsigned int lev_right = (level & 0xff00) >> 8;
-
-	if (lev_left > 100)
-		lev_left = 100;
-	if (lev_right > 100)
-		lev_right = 100;
-
-	/*
-	 * Mono devices have their right volume forced to their
-	 * left volume.  (from ALSA driver OSS emulation).
-	 */
-	if (!(devc->mix->stereo_devs & (1 << dev)))
-		lev_right = lev_left;
-
-	dev = devc->mix->decode_mixer(devc, dev, lev_left, lev_right);
-
-	if (dev >= 0)
-		waveartist_mixer_update(devc, dev);
-
-	return dev < 0 ? dev : 0;
-}
-
-static int
-waveartist_mixer_ioctl(int dev, unsigned int cmd, void __user * arg)
-{
-	struct wavnc_info *devc = (struct wavnc_info *)audio_devs[dev]->devc;
-	int ret = 0, val, nr;
-
-	/*
-	 * All SOUND_MIXER_* ioctls use type 'M'
-	 */
-	if (((cmd >> 8) & 255) != 'M')
-		return -ENOIOCTLCMD;
-
-#ifdef CONFIG_ARCH_NETWINDER
-	if (machine_is_netwinder()) {
-		ret = vnc_private_ioctl(dev, cmd, arg);
-		if (ret != -ENOIOCTLCMD)
-			return ret;
-		else
-			ret = 0;
-	}
-#endif
-
-	nr = cmd & 0xff;
-
-	if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
-		if (get_user(val, (int __user *)arg))
-			return -EFAULT;
-
-		switch (nr) {
-		case SOUND_MIXER_RECSRC:
-			waveartist_set_recmask(devc, val);
-			break;
-
-		default:
-			ret = -EINVAL;
-			if (nr < SOUND_MIXER_NRDEVICES &&
-			    devc->mix->supported_devs & (1 << nr))
-				ret = waveartist_set_mixer(devc, nr, val);
-		}
-	}
-
-	if (ret == 0 && _SIOC_DIR(cmd) & _SIOC_READ) {
-		ret = -EINVAL;
-
-		switch (nr) {
-		case SOUND_MIXER_RECSRC:
-			ret = devc->recmask;
-			break;
-
-		case SOUND_MIXER_DEVMASK:
-			ret = devc->mix->supported_devs;
-			break;
-
-		case SOUND_MIXER_STEREODEVS:
-			ret = devc->mix->stereo_devs;
-			break;
-
-		case SOUND_MIXER_RECMASK:
-			ret = devc->mix->recording_devs;
-			break;
-
-		case SOUND_MIXER_CAPS:
-			ret = SOUND_CAP_EXCL_INPUT;
-			break;
-
-		default:
-			if (nr < SOUND_MIXER_NRDEVICES)
-				ret = devc->mix->get_mixer(devc, nr);
-			break;
-		}
-
-		if (ret >= 0)
-			ret = put_user(ret, (int __user *)arg) ? -EFAULT : 0;
-	}
-
-	return ret;
-}
-
-static struct mixer_operations waveartist_mixer_operations =
-{
-	.owner	= THIS_MODULE,
-	.id	= "WaveArtist",
-	.name	= "WaveArtist",
-	.ioctl	= waveartist_mixer_ioctl
-};
-
-static void
-waveartist_mixer_reset(struct wavnc_info *devc)
-{
-	int i;
-
-	if (debug_flg & DEBUG_MIXER)
-		printk("%s: mixer_reset\n", devc->hw.name);
-
-	/*
-	 * reset mixer cmd
-	 */
-	waveartist_cmd1(devc, WACMD_RST_MIXER);
-
-	/*
-	 * set input for ADC to come from 'quiet'
-	 * turn on default modes
-	 */
-	waveartist_cmd3(devc, WACMD_SET_MIXER, 0x9800, 0xa836);
-
-	/*
-	 * set mixer input select to none, RX filter gains 0 dB
-	 */
-	waveartist_cmd3(devc, WACMD_SET_MIXER, 0x4c00, 0x8c00);
-
-	/*
-	 * set bit 0 reg 2 to 1 - unmute MonoOut
-	 */
-	waveartist_cmd3(devc, WACMD_SET_MIXER, 0x2801, 0x6800);
-
-	/* set default input device = internal mic
-	 * current recording device = none
-	 */
-	waveartist_set_recmask(devc, 0);
-
-	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
-		waveartist_mixer_update(devc, i);
-}
-
-static int __init waveartist_init(struct wavnc_info *devc)
-{
-	struct wavnc_port_info *portc;
-	char rev[3], dev_name[64];
-	int my_dev;
-
-	if (waveartist_reset(devc))
-		return -ENODEV;
-
-	sprintf(dev_name, "%s (%s", devc->hw.name, devc->chip_name);
-
-	if (waveartist_getrev(devc, rev)) {
-		strcat(dev_name, " rev. ");
-		strcat(dev_name, rev);
-	}
-	strcat(dev_name, ")");
-
-	conf_printf2(dev_name, devc->hw.io_base, devc->hw.irq,
-		     devc->hw.dma, devc->hw.dma2);
-
-	portc = kzalloc(sizeof(struct wavnc_port_info), GFP_KERNEL);
-	if (portc == NULL)
-		goto nomem;
-
-	my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, dev_name,
-			&waveartist_audio_driver, sizeof(struct audio_driver),
-			devc->audio_flags, AFMT_U8 | AFMT_S16_LE | AFMT_S8,
-			devc, devc->hw.dma, devc->hw.dma2);
-
-	if (my_dev < 0)
-		goto free;
-
-	audio_devs[my_dev]->portc = portc;
-
-	waveartist_mixer_reset(devc);
-
-	/*
-	 * clear any pending interrupt
-	 */
-	waveartist_iack(devc);
-
-	if (request_irq(devc->hw.irq, waveartist_intr, 0, devc->hw.name, devc) < 0) {
-		printk(KERN_ERR "%s: IRQ %d in use\n",
-			devc->hw.name, devc->hw.irq);
-		goto uninstall;
-	}
-
-	if (sound_alloc_dma(devc->hw.dma, devc->hw.name)) {
-		printk(KERN_ERR "%s: Can't allocate DMA%d\n",
-			devc->hw.name, devc->hw.dma);
-		goto uninstall_irq;
-	}
-
-	if (devc->hw.dma != devc->hw.dma2 && devc->hw.dma2 != NO_DMA)
-		if (sound_alloc_dma(devc->hw.dma2, devc->hw.name)) {
-			printk(KERN_ERR "%s: can't allocate DMA%d\n",
-				devc->hw.name, devc->hw.dma2);
-			goto uninstall_dma;
-		}
-
-	waveartist_set_ctlr(&devc->hw, 0, DMA1_IE | DMA0_IE);
-
-	audio_devs[my_dev]->mixer_dev =
-		sound_install_mixer(MIXER_DRIVER_VERSION,
-				dev_name,
-				&waveartist_mixer_operations,
-				sizeof(struct mixer_operations),
-				devc);
-
-	return my_dev;
-
-uninstall_dma:
-	sound_free_dma(devc->hw.dma);
-
-uninstall_irq:
-	free_irq(devc->hw.irq, devc);
-
-uninstall:
-	sound_unload_audiodev(my_dev);
-
-free:
-	kfree(portc);
-
-nomem:
-	return -1;
-}
-
-static int __init probe_waveartist(struct address_info *hw_config)
-{
-	struct wavnc_info *devc = &adev_info[nr_waveartist_devs];
-
-	if (nr_waveartist_devs >= MAX_AUDIO_DEV) {
-		printk(KERN_WARNING "waveartist: too many audio devices\n");
-		return 0;
-	}
-
-	if (!request_region(hw_config->io_base, 15, hw_config->name))  {
-		printk(KERN_WARNING "WaveArtist: I/O port conflict\n");
-		return 0;
-	}
-
-	if (hw_config->irq > 15 || hw_config->irq < 0) {
-		release_region(hw_config->io_base, 15);
-		printk(KERN_WARNING "WaveArtist: Bad IRQ %d\n",
-		       hw_config->irq);
-		return 0;
-	}
-
-	if (hw_config->dma != 3) {
-		release_region(hw_config->io_base, 15);
-		printk(KERN_WARNING "WaveArtist: Bad DMA %d\n",
-		       hw_config->dma);
-		return 0;
-	}
-
-	hw_config->name = "WaveArtist";
-	devc->hw = *hw_config;
-	devc->open_mode = 0;
-	devc->chip_name = "RWA-010";
-
-	return 1;
-}
-
-static void __init
-attach_waveartist(struct address_info *hw, const struct waveartist_mixer_info *mix)
-{
-	struct wavnc_info *devc = &adev_info[nr_waveartist_devs];
-
-	/*
-	 * NOTE! If irq < 0, there is another driver which has allocated the
-	 *   IRQ so that this driver doesn't need to allocate/deallocate it.
-	 *   The actually used IRQ is ABS(irq).
-	 */
-	devc->hw = *hw;
-	devc->hw.irq = (hw->irq > 0) ? hw->irq : 0;
-	devc->open_mode = 0;
-	devc->playback_dev = 0;
-	devc->record_dev = 0;
-	devc->audio_flags = DMA_AUTOMODE;
-	devc->levels = levels;
-
-	if (hw->dma != hw->dma2 && hw->dma2 != NO_DMA)
-		devc->audio_flags |= DMA_DUPLEX;
-
-	devc->mix = mix;
-	devc->dev_no = waveartist_init(devc);
-
-	if (devc->dev_no < 0)
-		release_region(hw->io_base, 15);
-	else {
-#ifdef CONFIG_ARCH_NETWINDER
-		if (machine_is_netwinder()) {
-			setup_timer(&vnc_timer, vnc_slider_tick,
-				    nr_waveartist_devs);
-			mod_timer(&vnc_timer, jiffies);
-
-			vnc_configure_mixer(devc, 0);
-
-			devc->no_autoselect = 1;
-		}
-#endif
-		nr_waveartist_devs += 1;
-	}
-}
-
-static void __exit unload_waveartist(struct address_info *hw)
-{
-	struct wavnc_info *devc = NULL;
-	int i;
-
-	for (i = 0; i < nr_waveartist_devs; i++)
-		if (hw->io_base == adev_info[i].hw.io_base) {
-			devc = adev_info + i;
-			break;
-		}
-
-	if (devc != NULL) {
-		int mixer;
-
-#ifdef CONFIG_ARCH_NETWINDER
-		if (machine_is_netwinder())
-			del_timer(&vnc_timer);
-#endif
-
-		release_region(devc->hw.io_base, 15);
-
-		waveartist_set_ctlr(&devc->hw, DMA1_IE|DMA0_IE, 0);
-
-		if (devc->hw.irq >= 0)
-			free_irq(devc->hw.irq, devc);
-
-		sound_free_dma(devc->hw.dma);
-
-		if (devc->hw.dma != devc->hw.dma2 &&
-		    devc->hw.dma2 != NO_DMA)
-			sound_free_dma(devc->hw.dma2);
-
-		mixer = audio_devs[devc->dev_no]->mixer_dev;
-
-		if (mixer >= 0)
-			sound_unload_mixerdev(mixer);
-
-		if (devc->dev_no >= 0)
-			sound_unload_audiodev(devc->dev_no);
-
-		nr_waveartist_devs -= 1;
-
-		for (; i < nr_waveartist_devs; i++)
-			adev_info[i] = adev_info[i + 1];
-	} else
-		printk(KERN_WARNING "waveartist: can't find device "
-		       "to unload\n");
-}
-
-#ifdef CONFIG_ARCH_NETWINDER
-
-/*
- * Rebel.com Netwinder specifics...
- */
-
-#include <asm/hardware/dec21285.h>
- 
-#define	VNC_TIMER_PERIOD (HZ/4)	//check slider 4 times/sec
-
-#define	MIXER_PRIVATE3_RESET	0x53570000
-#define	MIXER_PRIVATE3_READ	0x53570001
-#define	MIXER_PRIVATE3_WRITE	0x53570002
-
-#define	VNC_MUTE_INTERNAL_SPKR	0x01	//the sw mute on/off control bit
-#define	VNC_MUTE_LINE_OUT	0x10
-#define VNC_PHONE_DETECT	0x20
-#define VNC_HANDSET_DETECT	0x40
-#define VNC_DISABLE_AUTOSWITCH	0x80
-
-static inline void
-vnc_mute_spkr(struct wavnc_info *devc)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-	nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
-	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-}
-
-static void
-vnc_mute_lout(struct wavnc_info *devc)
-{
-	unsigned int left, right;
-
-	left  = waveartist_cmd1_r(devc, WACMD_GET_LEVEL);
-	right = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x400);
-
-	if (devc->line_mute_state) {
-		left &= ~1;
-		right &= ~1;
-	} else {
-		left |= 1;
-		right |= 1;
-	}
-	waveartist_cmd3(devc, WACMD_SET_MIXER, left, right);
-		
-}
-
-static int
-vnc_volume_slider(struct wavnc_info *devc)
-{
-	static signed int old_slider_volume;
-	unsigned long flags;
-	signed int volume = 255;
-
-	*CSR_TIMER1_LOAD = 0x00ffffff;
-
-	spin_lock_irqsave(&waveartist_lock, flags);
-
-	outb(0xFF, 0x201);
-	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV1;
-
-	while (volume && (inb(0x201) & 0x01))
-		volume--;
-
-	*CSR_TIMER1_CNTL = 0;
-
-	spin_unlock_irqrestore(&waveartist_lock,flags);
-	
-	volume = 0x00ffffff - *CSR_TIMER1_VALUE;
-
-
-#ifndef REVERSE
-	volume = 150 - (volume >> 5);
-#else
-	volume = (volume >> 6) - 25;
-#endif
-
-	if (volume < 0)
-		volume = 0;
-
-	if (volume > 100)
-		volume = 100;
-
-	/*
-	 * slider quite often reads +-8, so debounce this random noise
-	 */
-	if (abs(volume - old_slider_volume) > 7) {
-		old_slider_volume = volume;
-
-		if (debug_flg & DEBUG_MIXER)
-			printk(KERN_DEBUG "Slider volume: %d.\n", volume);
-	}
-
-	return old_slider_volume;
-}
-
-/*
- * Decode a recording mask into a mixer selection on the NetWinder
- * as follows:
- *
- *     OSS Source	WA Source	Actual source
- *  SOUND_MASK_IMIX	Mixer		Mixer output (same as AD1848)
- *  SOUND_MASK_LINE	Line		Line in
- *  SOUND_MASK_LINE1	Left Mic	Handset
- *  SOUND_MASK_PHONEIN	Left Aux	Telephone microphone
- *  SOUND_MASK_MIC	Right Mic	Builtin microphone
- */
-static unsigned int
-netwinder_select_input(struct wavnc_info *devc, unsigned int recmask,
-		       unsigned char *dev_l, unsigned char *dev_r)
-{
-	unsigned int recdev_l = ADC_MUX_NONE, recdev_r = ADC_MUX_NONE;
-
-	if (recmask & SOUND_MASK_IMIX) {
-		recmask = SOUND_MASK_IMIX;
-		recdev_l = ADC_MUX_MIXER;
-		recdev_r = ADC_MUX_MIXER;
-	} else if (recmask & SOUND_MASK_LINE) {
-		recmask = SOUND_MASK_LINE;
-		recdev_l = ADC_MUX_LINE;
-		recdev_r = ADC_MUX_LINE;
-	} else if (recmask & SOUND_MASK_LINE1) {
-		recmask = SOUND_MASK_LINE1;
-		waveartist_cmd1(devc, WACMD_SET_MONO); /* left */
-		recdev_l = ADC_MUX_MIC;
-		recdev_r = ADC_MUX_NONE;
-	} else if (recmask & SOUND_MASK_PHONEIN) {
-		recmask = SOUND_MASK_PHONEIN;
-		waveartist_cmd1(devc, WACMD_SET_MONO); /* left */
-		recdev_l = ADC_MUX_AUX1;
-		recdev_r = ADC_MUX_NONE;
-	} else if (recmask & SOUND_MASK_MIC) {
-		recmask = SOUND_MASK_MIC;
-		waveartist_cmd1(devc, WACMD_SET_MONO | 0x100);	/* right */
-		recdev_l = ADC_MUX_NONE;
-		recdev_r = ADC_MUX_MIC;
-	}
-
-	*dev_l = recdev_l;
-	*dev_r = recdev_r;
-
-	return recmask;
-}
-
-static int
-netwinder_decode_mixer(struct wavnc_info *devc, int dev, unsigned char lev_l,
-		       unsigned char lev_r)
-{
-	switch (dev) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_SYNTH:
-	case SOUND_MIXER_PCM:
-	case SOUND_MIXER_LINE:
-	case SOUND_MIXER_IGAIN:
-		devc->levels[dev] = lev_l | lev_r << 8;
-		break;
-
-	case SOUND_MIXER_MIC:		/* right mic only */
-		devc->levels[SOUND_MIXER_MIC] &= 0xff;
-		devc->levels[SOUND_MIXER_MIC] |= lev_l << 8;
-		break;
-
-	case SOUND_MIXER_LINE1:		/* left mic only  */
-		devc->levels[SOUND_MIXER_MIC] &= 0xff00;
-		devc->levels[SOUND_MIXER_MIC] |= lev_l;
-		dev = SOUND_MIXER_MIC;
-		break;
-
-	case SOUND_MIXER_PHONEIN:	/* left aux only  */
-		devc->levels[SOUND_MIXER_LINE1] = lev_l;
-		dev = SOUND_MIXER_LINE1;
-		break;
-
-	case SOUND_MIXER_IMIX:
-	case SOUND_MIXER_PHONEOUT:
-		break;
-
-	default:
-		dev = -EINVAL;
-		break;
-	}
-	return dev;
-}
-
-static int netwinder_get_mixer(struct wavnc_info *devc, int dev)
-{
-	int levels;
-
-	switch (dev) {
-	case SOUND_MIXER_VOLUME:
-	case SOUND_MIXER_SYNTH:
-	case SOUND_MIXER_PCM:
-	case SOUND_MIXER_LINE:
-	case SOUND_MIXER_IGAIN:
-		levels = devc->levels[dev];
-		break;
-
-	case SOUND_MIXER_MIC:		/* builtin mic: right mic only */
-		levels = devc->levels[SOUND_MIXER_MIC] >> 8;
-		levels |= levels << 8;
-		break;
-
-	case SOUND_MIXER_LINE1:		/* handset mic: left mic only */
-		levels = devc->levels[SOUND_MIXER_MIC] & 0xff;
-		levels |= levels << 8;
-		break;
-
-	case SOUND_MIXER_PHONEIN:	/* phone mic: left aux1 only */
-		levels = devc->levels[SOUND_MIXER_LINE1] & 0xff;
-		levels |= levels << 8;
-		break;
-
-	default:
-		levels = 0;
-	}
-
-	return levels;
-}
-
-/*
- * Waveartist specific mixer information.
- */
-static const struct waveartist_mixer_info netwinder_mixer = {
-	.supported_devs	= SOUND_MASK_VOLUME  | SOUND_MASK_SYNTH   |
-			SOUND_MASK_PCM     | SOUND_MASK_SPEAKER |
-			SOUND_MASK_LINE    | SOUND_MASK_MIC     |
-			SOUND_MASK_IMIX    | SOUND_MASK_LINE1   |
-			SOUND_MASK_PHONEIN | SOUND_MASK_PHONEOUT|
-			SOUND_MASK_IGAIN,
-
-	.recording_devs	= SOUND_MASK_LINE    | SOUND_MASK_MIC     |
-			SOUND_MASK_IMIX    | SOUND_MASK_LINE1   |
-			SOUND_MASK_PHONEIN,
-
-	.stereo_devs	= SOUND_MASK_VOLUME  | SOUND_MASK_SYNTH   |
-			SOUND_MASK_PCM     | SOUND_MASK_LINE    |
-			SOUND_MASK_IMIX    | SOUND_MASK_IGAIN,
-
-	.select_input	= netwinder_select_input,
-	.decode_mixer	= netwinder_decode_mixer,
-	.get_mixer	= netwinder_get_mixer,
-};
-
-static void
-vnc_configure_mixer(struct wavnc_info *devc, unsigned int recmask)
-{
-	if (!devc->no_autoselect) {
-		if (devc->handset_detect) {
-			recmask = SOUND_MASK_LINE1;
-			devc->spkr_mute_state = devc->line_mute_state = 1;
-		} else if (devc->telephone_detect) {
-			recmask = SOUND_MASK_PHONEIN;
-			devc->spkr_mute_state = devc->line_mute_state = 1;
-		} else {
-			/* unless someone has asked for LINE-IN,
-			 * we default to MIC
-			 */
-			if ((devc->recmask & SOUND_MASK_LINE) == 0)
-				devc->recmask = SOUND_MASK_MIC;
-			devc->spkr_mute_state = devc->line_mute_state = 0;
-		}
-		vnc_mute_spkr(devc);
-		vnc_mute_lout(devc);
-
-		if (recmask != devc->recmask)
-			waveartist_set_recmask(devc, recmask);
-	}
-}
-
-static int
-vnc_slider(struct wavnc_info *devc)
-{
-	signed int slider_volume;
-	unsigned int temp, old_hs, old_td;
-
-	/*
-	 * read the "buttons" state.
-	 *  Bit 4 = 0 means handset present
-	 *  Bit 5 = 1 means phone offhook
-	 */
-	temp = inb(0x201);
-
-	old_hs = devc->handset_detect;
-	old_td = devc->telephone_detect;
-
-	devc->handset_detect = !(temp & 0x10);
-	devc->telephone_detect = !!(temp & 0x20);
-
-	if (!devc->no_autoselect &&
-	    (old_hs != devc->handset_detect ||
-	     old_td != devc->telephone_detect))
-		vnc_configure_mixer(devc, devc->recmask);
-
-	slider_volume = vnc_volume_slider(devc);
-
-	/*
-	 * If we're using software controlled volume, and
-	 * the slider moves by more than 20%, then we
-	 * switch back to slider controlled volume.
-	 */
-	if (abs(devc->slider_vol - slider_volume) > 20)
-		devc->use_slider = 1;
-
-	/*
-	 * use only left channel
-	 */
-	temp = levels[SOUND_MIXER_VOLUME] & 0xFF;
-
-	if (slider_volume != temp && devc->use_slider) {
-		devc->slider_vol = slider_volume;
-
-		waveartist_set_mixer(devc, SOUND_MIXER_VOLUME,
-			slider_volume | slider_volume << 8);
-
-		return 1;
-	}
-
-	return 0;
-}
-
-static void
-vnc_slider_tick(unsigned long data)
-{
-	int next_timeout;
-
-	if (vnc_slider(adev_info + data))
-		next_timeout = 5;	// mixer reported change
-	else
-		next_timeout = VNC_TIMER_PERIOD;
-
-	mod_timer(&vnc_timer, jiffies + next_timeout);
-}
-
-static int
-vnc_private_ioctl(int dev, unsigned int cmd, int __user * arg)
-{
-	struct wavnc_info *devc = (struct wavnc_info *)audio_devs[dev]->devc;
-	int val;
-
-	switch (cmd) {
-	case SOUND_MIXER_PRIVATE1:
-	{
-		u_int prev_spkr_mute, prev_line_mute, prev_auto_state;
-		int val;
-
-		if (get_user(val, arg))
-			return -EFAULT;
-
-		/* check if parameter is logical */
-		if (val & ~(VNC_MUTE_INTERNAL_SPKR |
-			    VNC_MUTE_LINE_OUT |
-			    VNC_DISABLE_AUTOSWITCH))
-			return -EINVAL;
-
-		prev_auto_state = devc->no_autoselect;
-		prev_spkr_mute  = devc->spkr_mute_state;
-		prev_line_mute  = devc->line_mute_state;
-
-		devc->no_autoselect   = (val & VNC_DISABLE_AUTOSWITCH) ? 1 : 0;
-		devc->spkr_mute_state = (val & VNC_MUTE_INTERNAL_SPKR) ? 1 : 0;
-		devc->line_mute_state = (val & VNC_MUTE_LINE_OUT) ? 1 : 0;
-
-		if (prev_spkr_mute != devc->spkr_mute_state)
-			vnc_mute_spkr(devc);
-
-		if (prev_line_mute != devc->line_mute_state)
-			vnc_mute_lout(devc);
-
-		if (prev_auto_state != devc->no_autoselect)
-			vnc_configure_mixer(devc, devc->recmask);
-
-		return 0;
-	}
-
-	case SOUND_MIXER_PRIVATE2:
-		if (get_user(val, arg))
-			return -EFAULT;
-
-		switch (val) {
-#define VNC_SOUND_PAUSE         0x53    //to pause the DSP
-#define VNC_SOUND_RESUME        0x57    //to unpause the DSP
-		case VNC_SOUND_PAUSE:
-			waveartist_cmd1(devc, 0x16);
-			break;
-
-		case VNC_SOUND_RESUME:
-			waveartist_cmd1(devc, 0x18);
-			break;
-
-		default:
-			return -EINVAL;
-		}
-		return 0;
-
-	/* private ioctl to allow bulk access to waveartist */
-	case SOUND_MIXER_PRIVATE3:
-	{
-		unsigned long	flags;
-		int		mixer_reg[15], i, val;
-
-		if (get_user(val, arg))
-			return -EFAULT;
-		if (copy_from_user(mixer_reg, (void *)val, sizeof(mixer_reg)))
-			return -EFAULT;
-
-		switch (mixer_reg[14]) {
-		case MIXER_PRIVATE3_RESET:
-			waveartist_mixer_reset(devc);
-			break;
-
-		case MIXER_PRIVATE3_WRITE:
-			waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[0], mixer_reg[4]);
-			waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[1], mixer_reg[5]);
-			waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[2], mixer_reg[6]);
-			waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[3], mixer_reg[7]);
-			waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[8], mixer_reg[9]);
-
-			waveartist_cmd3(devc, WACMD_SET_LEVEL, mixer_reg[10], mixer_reg[11]);
-			waveartist_cmd3(devc, WACMD_SET_LEVEL, mixer_reg[12], mixer_reg[13]);
-			break;
-
-		case MIXER_PRIVATE3_READ:
-			spin_lock_irqsave(&waveartist_lock, flags);
-
-			for (i = 0x30; i < 14 << 8; i += 1 << 8)
-				waveartist_cmd(devc, 1, &i, 1, mixer_reg + (i >> 8));
-
-			spin_unlock_irqrestore(&waveartist_lock, flags);
-
-			if (copy_to_user((void *)val, mixer_reg, sizeof(mixer_reg)))
-				return -EFAULT;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-		return 0;
-	}
-
-	/* read back the state from PRIVATE1 */
-	case SOUND_MIXER_PRIVATE4:
-		val = (devc->spkr_mute_state  ? VNC_MUTE_INTERNAL_SPKR : 0) |
-		      (devc->line_mute_state  ? VNC_MUTE_LINE_OUT      : 0) |
-		      (devc->handset_detect   ? VNC_HANDSET_DETECT     : 0) |
-		      (devc->telephone_detect ? VNC_PHONE_DETECT       : 0) |
-		      (devc->no_autoselect    ? VNC_DISABLE_AUTOSWITCH : 0);
-
-		return put_user(val, arg) ? -EFAULT : 0;
-	}
-
-	if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
-		/*
-		 * special case for master volume: if we
-		 * received this call - switch from hw
-		 * volume control to a software volume
-		 * control, till the hw volume is modified
-		 * to signal that user wants to be back in
-		 * hardware...
-		 */
-		if ((cmd & 0xff) == SOUND_MIXER_VOLUME)
-			devc->use_slider = 0;
-
-		/* speaker output            */
-		if ((cmd & 0xff) == SOUND_MIXER_SPEAKER) {
-			unsigned int val, l, r;
-
-			if (get_user(val, arg))
-				return -EFAULT;
-
-			l = val & 0x7f;
-			r = (val & 0x7f00) >> 8;
-			val = (l + r) / 2;
-			devc->levels[SOUND_MIXER_SPEAKER] = val | (val << 8);
-			devc->spkr_mute_state = (val <= 50);
-			vnc_mute_spkr(devc);
-			return 0;
-		}
-	}
-
-	return -ENOIOCTLCMD;
-}
-
-#endif
-
-static struct address_info cfg;
-
-static int attached;
-
-static int __initdata io = 0;
-static int __initdata irq = 0;
-static int __initdata dma = 0;
-static int __initdata dma2 = 0;
-
-
-static int __init init_waveartist(void)
-{
-	const struct waveartist_mixer_info *mix;
-
-	if (!io && machine_is_netwinder()) {
-		/*
-		 * The NetWinder WaveArtist is at a fixed address.
-		 * If the user does not supply an address, use the
-		 * well-known parameters.
-		 */
-		io   = 0x250;
-		irq  = 12;
-		dma  = 3;
-		dma2 = 7;
-	}
-
-	mix = &waveartist_mixer;
-#ifdef CONFIG_ARCH_NETWINDER
-	if (machine_is_netwinder())
-		mix = &netwinder_mixer;
-#endif
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma2;
-
-	if (!probe_waveartist(&cfg))
-		return -ENODEV;
-
-	attach_waveartist(&cfg, mix);
-	attached = 1;
-
-	return 0;
-}
-
-static void __exit cleanup_waveartist(void)
-{
-	if (attached)
-		unload_waveartist(&cfg);
-}
-
-module_init(init_waveartist);
-module_exit(cleanup_waveartist);
-
-#ifndef MODULE
-static int __init setup_waveartist(char *str)
-{
-	/* io, irq, dma, dma2 */
-	int ints[5];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma2	= ints[4];
-
-	return 1;
-}
-__setup("waveartist=", setup_waveartist);
-#endif
-
-MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver");
-module_param_hw(io, int, ioport, 0);		/* IO base */
-module_param_hw(irq, int, irq, 0);		/* IRQ */
-module_param_hw(dma, int, dma, 0);		/* DMA */
-module_param_hw(dma2, int, dma, 0);		/* DMA2 */
-MODULE_LICENSE("GPL");
diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h
deleted file mode 100644
index dac4ca910d95..000000000000
--- a/sound/oss/waveartist.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/sound/oss/waveartist.h
- *
- * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
- */
-
-//registers
-#define CMDR	0
-#define DATR	2
-#define CTLR	4
-#define	STATR	5
-#define	IRQSTAT	12
-
-//bit defs
-//reg STATR
-#define	CMD_WE	0x80
-#define	CMD_RF	0x40
-#define	DAT_WE	0x20
-#define	DAT_RF	0x10
-
-#define	IRQ_REQ	0x08
-#define	DMA1	0x04
-#define	DMA0	0x02
-
-//bit defs
-//reg CTLR
-#define	CMD_WEIE	0x80
-#define	CMD_RFIE	0x40
-#define	DAT_WEIE	0x20
-#define	DAT_RFIE	0x10
-
-#define	RESET	0x08
-#define	DMA1_IE	0x04
-#define	DMA0_IE	0x02
-#define	IRQ_ACK	0x01
-
-//commands
-
-#define	WACMD_SYSTEMID		0x00
-#define WACMD_GETREV		0x00
-#define	WACMD_INPUTFORMAT	0x10	//0-8S, 1-16S, 2-8U
-#define	WACMD_INPUTCHANNELS	0x11	//1-Mono, 2-Stereo
-#define	WACMD_INPUTSPEED	0x12	//sampling rate
-#define	WACMD_INPUTDMA		0x13	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_INPUTSIZE		0x14	//samples to interrupt
-#define	WACMD_INPUTSTART	0x15	//start ADC
-#define	WACMD_INPUTPAUSE	0x16	//pause ADC
-#define	WACMD_INPUTSTOP		0x17	//stop ADC
-#define	WACMD_INPUTRESUME	0x18	//resume ADC
-#define	WACMD_INPUTPIO		0x19	//PIO ADC
-
-#define	WACMD_OUTPUTFORMAT	0x20	//0-8S, 1-16S, 2-8U
-#define	WACMD_OUTPUTCHANNELS	0x21	//1-Mono, 2-Stereo
-#define	WACMD_OUTPUTSPEED	0x22	//sampling rate
-#define	WACMD_OUTPUTDMA		0x23	//0-8bit, 1-16bit, 2-PIO
-#define	WACMD_OUTPUTSIZE	0x24	//samples to interrupt
-#define	WACMD_OUTPUTSTART	0x25	//start ADC
-#define	WACMD_OUTPUTPAUSE	0x26	//pause ADC
-#define	WACMD_OUTPUTSTOP	0x27	//stop ADC
-#define	WACMD_OUTPUTRESUME	0x28	//resume ADC
-#define	WACMD_OUTPUTPIO		0x29	//PIO ADC
-
-#define	WACMD_GET_LEVEL		0x30
-#define	WACMD_SET_LEVEL		0x31
-#define	WACMD_SET_MIXER		0x32
-#define	WACMD_RST_MIXER		0x33
-#define	WACMD_SET_MONO		0x34
-
-/*
- * Definitions for left/right recording input mux
- */
-#define ADC_MUX_NONE	0
-#define ADC_MUX_MIXER	1
-#define ADC_MUX_LINE	2
-#define ADC_MUX_AUX2	3
-#define ADC_MUX_AUX1	4
-#define ADC_MUX_MIC	5
-
-/*
- * Definitions for mixer gain settings
- */
-#define MIX_GAIN_LINE	0	/* line in	 */
-#define MIX_GAIN_AUX1	1	/* aux1		 */
-#define MIX_GAIN_AUX2	2	/* aux2		 */
-#define MIX_GAIN_XMIC	3	/* crossover mic */
-#define MIX_GAIN_MIC	4	/* normal mic	 */
-#define MIX_GAIN_PREMIC	5	/* preamp mic	 */
-#define MIX_GAIN_OUT	6	/* output	 */
-#define MIX_GAIN_MONO	7	/* mono in	 */
-
-int wa_sendcmd(unsigned int cmd);
-int wa_writecmd(unsigned int cmd, unsigned int arg);
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 70d023a85bf5..720361455c60 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -573,10 +573,8 @@ static void snd_card_asihpi_pcm_int_start(struct snd_pcm_substream *substream)
 
 static void snd_card_asihpi_pcm_int_stop(struct snd_pcm_substream *substream)
 {
-	struct snd_card_asihpi_pcm *dpcm;
 	struct snd_card_asihpi *card;
 
-	dpcm = (struct snd_card_asihpi_pcm *)substream->runtime->private_data;
 	card = snd_pcm_substream_chip(substream);
 
 	hpi_handle_error(hpi_adapter_set_property(card->hpi->adapter->index,
@@ -749,9 +747,9 @@ static inline unsigned int modulo_min(unsigned int a, unsigned int b,
 
 /** Timer function, equivalent to interrupt service routine for cards
 */
-static void snd_card_asihpi_timer_function(unsigned long data)
+static void snd_card_asihpi_timer_function(struct timer_list *t)
 {
-	struct snd_card_asihpi_pcm *dpcm = (struct snd_card_asihpi_pcm *)data;
+	struct snd_card_asihpi_pcm *dpcm = from_timer(dpcm, t, timer);
 	struct snd_pcm_substream *substream = dpcm->substream;
 	struct snd_card_asihpi *card = snd_pcm_substream_chip(substream);
 	struct snd_pcm_runtime *runtime;
@@ -863,7 +861,6 @@ static void snd_card_asihpi_timer_function(unsigned long data)
 
 	snd_pcm_group_for_each_entry(s, substream) {
 		struct snd_card_asihpi_pcm *ds = s->runtime->private_data;
-		runtime = s->runtime;
 
 		/* don't link Cap and Play */
 		if (substream->stream != s->stream)
@@ -948,7 +945,7 @@ static void snd_card_asihpi_int_task(unsigned long data)
 	asihpi = (struct snd_card_asihpi *)a->snd_card->private_data;
 	if (asihpi->llmode_streampriv)
 		snd_card_asihpi_timer_function(
-			(unsigned long)asihpi->llmode_streampriv);
+			&asihpi->llmode_streampriv->timer);
 }
 
 static void snd_card_asihpi_isr(struct hpi_adapter *a)
@@ -1059,8 +1056,7 @@ static int snd_card_asihpi_playback_open(struct snd_pcm_substream *substream)
 	    If internal and other stream playing, can't switch
 	*/
 
-	setup_timer(&dpcm->timer, snd_card_asihpi_timer_function,
-		    (unsigned long) dpcm);
+	timer_setup(&dpcm->timer, snd_card_asihpi_timer_function, 0);
 	dpcm->substream = substream;
 	runtime->private_data = dpcm;
 	runtime->private_free = snd_card_asihpi_runtime_free;
@@ -1240,8 +1236,7 @@ static int snd_card_asihpi_capture_open(struct snd_pcm_substream *substream)
 	if (err)
 		return -EIO;
 
-	setup_timer(&dpcm->timer, snd_card_asihpi_timer_function,
-		    (unsigned long) dpcm);
+	timer_setup(&dpcm->timer, snd_card_asihpi_timer_function, 0);
 	dpcm->substream = substream;
 	runtime->private_data = dpcm;
 	runtime->private_free = snd_card_asihpi_runtime_free;
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index c308a4f70550..4083c8b01619 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -2628,7 +2628,7 @@ static void vortex_spdif_init(vortex_t * vortex, int spdif_sr, int spdif_mode)
 			else
 				edi = 0x1ffff;
 		} else {
-			i = edi = 0x800;
+			edi = 0x800;
 		}
 		/* this_04 and this_08 are the CASp4Src's (samplerate converters) */
 		vortex_src_setupchannel(vortex, this_04, edi, 0, 1,
diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c
index 8f945341720b..08e874e9a7f6 100644
--- a/sound/pci/ctxfi/cttimer.c
+++ b/sound/pci/ctxfi/cttimer.c
@@ -63,9 +63,9 @@ struct ct_timer {
  * system-timer-based updates
  */
 
-static void ct_systimer_callback(unsigned long data)
+static void ct_systimer_callback(struct timer_list *t)
 {
-	struct ct_timer_instance *ti = (struct ct_timer_instance *)data;
+	struct ct_timer_instance *ti = from_timer(ti, t, timer);
 	struct snd_pcm_substream *substream = ti->substream;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct ct_atc_pcm *apcm = ti->apcm;
@@ -93,8 +93,7 @@ static void ct_systimer_callback(unsigned long data)
 
 static void ct_systimer_init(struct ct_timer_instance *ti)
 {
-	setup_timer(&ti->timer, ct_systimer_callback,
-		    (unsigned long)ti);
+	timer_setup(&ti->timer, ct_systimer_callback, 0);
 }
 
 static void ct_systimer_start(struct ct_timer_instance *ti)
diff --git a/sound/pci/echoaudio/midi.c b/sound/pci/echoaudio/midi.c
index 8c685ddb1a41..6045a115cffe 100644
--- a/sound/pci/echoaudio/midi.c
+++ b/sound/pci/echoaudio/midi.c
@@ -199,9 +199,9 @@ static int snd_echo_midi_output_open(struct snd_rawmidi_substream *substream)
 
 
 
-static void snd_echo_midi_output_write(unsigned long data)
+static void snd_echo_midi_output_write(struct timer_list *t)
 {
-	struct echoaudio *chip = (struct echoaudio *)data;
+	struct echoaudio *chip = from_timer(chip, t, timer);
 	unsigned long flags;
 	int bytes, sent, time;
 	unsigned char buf[MIDI_OUT_BUFFER_SIZE - 1];
@@ -257,8 +257,8 @@ static void snd_echo_midi_output_trigger(struct snd_rawmidi_substream *substream
 	spin_lock_irq(&chip->lock);
 	if (up) {
 		if (!chip->tinuse) {
-			setup_timer(&chip->timer, snd_echo_midi_output_write,
-				    (unsigned long)chip);
+			timer_setup(&chip->timer, snd_echo_midi_output_write,
+				    0);
 			chip->tinuse = 1;
 		}
 	} else {
@@ -273,7 +273,7 @@ static void snd_echo_midi_output_trigger(struct snd_rawmidi_substream *substream
 	spin_unlock_irq(&chip->lock);
 
 	if (up && !chip->midi_full)
-		snd_echo_midi_output_write((unsigned long)chip);
+		snd_echo_midi_output_write(&chip->timer);
 }
 
 
diff --git a/sound/pci/emu10k1/emuproc.c b/sound/pci/emu10k1/emuproc.c
index cf05229b569b..bde0d1954f56 100644
--- a/sound/pci/emu10k1/emuproc.c
+++ b/sound/pci/emu10k1/emuproc.c
@@ -280,7 +280,6 @@ static void snd_emu10k1_proc_rates_read(struct snd_info_entry *entry,
 	struct snd_emu10k1 *emu = entry->private_data;
 	unsigned int val, tmp, n;
 	val = snd_emu10k1_ptr20_read(emu, CAPTURE_RATE_STATUS, 0);
-	tmp = (val >> 16) & 0x8;
 	for (n = 0; n < 4; n++) {
 		tmp = val >> (16 + (n*4));
 		if (tmp & 0x8) snd_iprintf(buffer, "Channel %d: Rate=%d\n", n, samplerate[tmp & 0x7]);
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index d4cd6451fdca..39f79a6b5283 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -732,7 +732,7 @@ static void snd_es1371_codec_wait(struct snd_ac97 *ac97)
 
 static void snd_es1371_adc_rate(struct ensoniq * ensoniq, unsigned int rate)
 {
-	unsigned int n, truncm, freq, result;
+	unsigned int n, truncm, freq;
 
 	mutex_lock(&ensoniq->src_mutex);
 	n = rate / 3000;
@@ -740,7 +740,6 @@ static void snd_es1371_adc_rate(struct ensoniq * ensoniq, unsigned int rate)
 		n--;
 	truncm = (21 * n - 1) | 1;
 	freq = ((48000UL << 15) / rate) * n;
-	result = (48000UL << 15) / (freq / n);
 	if (rate >= 24000) {
 		if (truncm > 239)
 			truncm = 239;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a0989d231fd0..c1f8e5479bf3 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -977,7 +977,7 @@ int snd_hda_codec_update_widgets(struct hda_codec *codec)
 	hda_nid_t fg;
 	int err;
 
-	err = snd_hdac_refresh_widget_sysfs(&codec->core);
+	err = snd_hdac_refresh_widgets(&codec->core, true);
 	if (err < 0)
 		return err;
 
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 28e265a88383..5cc65093d941 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -795,6 +795,8 @@ static void activate_amp_in(struct hda_codec *codec, struct nid_path *path,
 	hda_nid_t nid = path->path[i];
 
 	nums = snd_hda_get_conn_list(codec, nid, &conn);
+	if (nums < 0)
+		return;
 	type = get_wcaps_type(get_wcaps(codec, nid));
 	if (type == AC_WID_PIN ||
 	    (type == AC_WID_AUD_IN && codec->single_adc_amp)) {
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 3e73d5c6ccfc..768ea8651993 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -27,6 +27,7 @@
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/firmware.h>
+#include <linux/kernel.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
@@ -3605,8 +3606,7 @@ static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol,
 static int ca0132_voicefx_info(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_info *uinfo)
 {
-	unsigned int items = sizeof(ca0132_voicefx_presets)
-				/ sizeof(struct ct_voicefx_preset);
+	unsigned int items = ARRAY_SIZE(ca0132_voicefx_presets);
 
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 	uinfo->count = 1;
@@ -3635,10 +3635,8 @@ static int ca0132_voicefx_put(struct snd_kcontrol *kcontrol,
 	struct ca0132_spec *spec = codec->spec;
 	int i, err = 0;
 	int sel = ucontrol->value.enumerated.item[0];
-	unsigned int items = sizeof(ca0132_voicefx_presets)
-				/ sizeof(struct ct_voicefx_preset);
 
-	if (sel >= items)
+	if (sel >= ARRAY_SIZE(ca0132_voicefx_presets))
 		return 0;
 
 	codec_dbg(codec, "ca0132_voicefx_put: sel=%d, preset=%s\n",
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index dce0682c5001..db1a376e27c0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1803,6 +1803,7 @@ enum {
 	ALC887_FIXUP_ASUS_BASS,
 	ALC887_FIXUP_BASS_CHMAP,
 	ALC1220_FIXUP_GB_DUAL_CODECS,
+	ALC1220_FIXUP_CLEVO_P950,
 };
 
 static void alc889_fixup_coef(struct hda_codec *codec,
@@ -2020,6 +2021,23 @@ static void alc1220_fixup_gb_dual_codecs(struct hda_codec *codec,
 	}
 }
 
+static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
+				     const struct hda_fixup *fix,
+				     int action)
+{
+	hda_nid_t conn1[1] = { 0x0c };
+
+	if (action != HDA_FIXUP_ACT_PRE_PROBE)
+		return;
+
+	alc_update_coef_idx(codec, 0x7, 0, 0x3c3);
+	/* We therefore want to make sure 0x14 (front headphone) and
+	 * 0x1b (speakers) use the stereo DAC 0x02
+	 */
+	snd_hda_override_conn_list(codec, 0x14, 1, conn1);
+	snd_hda_override_conn_list(codec, 0x1b, 1, conn1);
+}
+
 static const struct hda_fixup alc882_fixups[] = {
 	[ALC882_FIXUP_ABIT_AW9D_MAX] = {
 		.type = HDA_FIXUP_PINS,
@@ -2260,6 +2278,10 @@ static const struct hda_fixup alc882_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc1220_fixup_gb_dual_codecs,
 	},
+	[ALC1220_FIXUP_CLEVO_P950] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc1220_fixup_clevo_p950,
+	},
 };
 
 static const struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -2333,6 +2355,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
+	SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530),
@@ -6366,6 +6389,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC292_FIXUP_TPT440, .name = "tpt440"},
 	{.id = ALC292_FIXUP_TPT460, .name = "tpt460"},
 	{.id = ALC233_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"},
+	{.id = ALC700_FIXUP_INTEL_REFERENCE, .name = "alc700-ref"},
 	{}
 };
 #define ALC225_STANDARD_PINS \
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0e66afa403a3..f1fe497c2f9d 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2285,7 +2285,7 @@ static unsigned char snd_ice1712_read_i2c(struct snd_ice1712 *ice,
 static int snd_ice1712_read_eeprom(struct snd_ice1712 *ice,
 				   const char *modelname)
 {
-	int dev = 0xa0;		/* EEPROM device address */
+	int dev = ICE_I2C_EEPROM_ADDR;	/* I2C EEPROM device address */
 	unsigned int i, size;
 	struct snd_ice1712_card_info * const *tbl, *c;
 
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index 5cfba09c9761..8ae8742662a5 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -218,8 +218,9 @@
 
 
 /*
- *
+ * I2C EEPROM Address
  */
+#define ICE_I2C_EEPROM_ADDR		0xA0
 
 struct snd_ice1712;
 
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 04cd71c74e5c..c7b007164c99 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -599,9 +599,9 @@ static void snd_korg1212_SendStopAndWait(struct snd_korg1212 *korg1212)
 }
 
 /* timer callback for checking the ack of stop request */
-static void snd_korg1212_timer_func(unsigned long data)
+static void snd_korg1212_timer_func(struct timer_list *t)
 {
-        struct snd_korg1212 *korg1212 = (struct snd_korg1212 *) data;
+	struct snd_korg1212 *korg1212 = from_timer(korg1212, t, timer);
 	unsigned long flags;
 	
 	spin_lock_irqsave(&korg1212->lock, flags);
@@ -2189,8 +2189,7 @@ static int snd_korg1212_create(struct snd_card *card, struct pci_dev *pci,
         init_waitqueue_head(&korg1212->wait);
         spin_lock_init(&korg1212->lock);
 	mutex_init(&korg1212->open_mutex);
-	setup_timer(&korg1212->timer, snd_korg1212_timer_func,
-		    (unsigned long)korg1212);
+	timer_setup(&korg1212->timer, snd_korg1212_timer_func, 0);
 
         korg1212->irq = -1;
         korg1212->clkSource = K1212_CLKIDX_Local;
diff --git a/sound/pci/oxygen/xonar_dg.h b/sound/pci/oxygen/xonar_dg.h
index d461df357aa1..5a07cda011b3 100644
--- a/sound/pci/oxygen/xonar_dg.h
+++ b/sound/pci/oxygen/xonar_dg.h
@@ -51,6 +51,6 @@ void dg_suspend(struct oxygen *chip);
 void dg_resume(struct oxygen *chip);
 void dg_cleanup(struct oxygen *chip);
 
-extern struct oxygen_model model_xonar_dg;
+extern const struct oxygen_model model_xonar_dg;
 
 #endif
diff --git a/sound/pci/oxygen/xonar_dg_mixer.c b/sound/pci/oxygen/xonar_dg_mixer.c
index b885dac28a09..d22fbe8aebd0 100644
--- a/sound/pci/oxygen/xonar_dg_mixer.c
+++ b/sound/pci/oxygen/xonar_dg_mixer.c
@@ -449,7 +449,7 @@ static int dg_mixer_init(struct oxygen *chip)
 	return 0;
 }
 
-struct oxygen_model model_xonar_dg = {
+const struct oxygen_model model_xonar_dg = {
 	.longname = "C-Media Oxygen HD Audio",
 	.chip = "CMI8786",
 	.init = dg_init,
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 9f0f73875f01..1bff4b1b39cd 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -1410,9 +1410,9 @@ static void snd_hdsp_midi_input_trigger(struct snd_rawmidi_substream *substream,
 	spin_unlock_irqrestore (&hdsp->lock, flags);
 }
 
-static void snd_hdsp_midi_output_timer(unsigned long data)
+static void snd_hdsp_midi_output_timer(struct timer_list *t)
 {
-	struct hdsp_midi *hmidi = (struct hdsp_midi *) data;
+	struct hdsp_midi *hmidi = from_timer(hmidi, t, timer);
 	unsigned long flags;
 
 	snd_hdsp_midi_output_write(hmidi);
@@ -1439,8 +1439,8 @@ static void snd_hdsp_midi_output_trigger(struct snd_rawmidi_substream *substream
 	spin_lock_irqsave (&hmidi->lock, flags);
 	if (up) {
 		if (!hmidi->istimer) {
-			setup_timer(&hmidi->timer, snd_hdsp_midi_output_timer,
-				    (unsigned long) hmidi);
+			timer_setup(&hmidi->timer, snd_hdsp_midi_output_timer,
+				    0);
 			mod_timer(&hmidi->timer, 1 + jiffies);
 			hmidi->istimer++;
 		}
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index f20d42714e4d..4c59983158e0 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -1946,9 +1946,9 @@ snd_hdspm_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
 	spin_unlock_irqrestore (&hdspm->lock, flags);
 }
 
-static void snd_hdspm_midi_output_timer(unsigned long data)
+static void snd_hdspm_midi_output_timer(struct timer_list *t)
 {
-	struct hdspm_midi *hmidi = (struct hdspm_midi *) data;
+	struct hdspm_midi *hmidi = from_timer(hmidi, t, timer);
 	unsigned long flags;
 
 	snd_hdspm_midi_output_write(hmidi);
@@ -1976,8 +1976,8 @@ snd_hdspm_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
 	spin_lock_irqsave (&hmidi->lock, flags);
 	if (up) {
 		if (!hmidi->istimer) {
-			setup_timer(&hmidi->timer, snd_hdspm_midi_output_timer,
-				    (unsigned long) hmidi);
+			timer_setup(&hmidi->timer,
+				    snd_hdspm_midi_output_timer, 0);
 			mod_timer(&hmidi->timer, 1 + jiffies);
 			hmidi->istimer++;
 		}
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index fdc680ae8aa0..2b26311405a4 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -299,14 +299,14 @@ static void run_spu_dma(struct work_struct *work)
 	}
 }
 
-static void aica_period_elapsed(unsigned long timer_var)
+static void aica_period_elapsed(struct timer_list *t)
 {
+	struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
+							      t, timer);
+	struct snd_pcm_substream *substream = dreamcastcard->timer_substream;
 	/*timer function - so cannot sleep */
 	int play_period;
 	struct snd_pcm_runtime *runtime;
-	struct snd_pcm_substream *substream;
-	struct snd_card_aica *dreamcastcard;
-	substream = (struct snd_pcm_substream *) timer_var;
 	runtime = substream->runtime;
 	dreamcastcard = substream->pcm->private_data;
 	/* Have we played out an additional period? */
@@ -336,12 +336,12 @@ static void spu_begin_dma(struct snd_pcm_substream *substream)
 	/*get the queue to do the work */
 	schedule_work(&(dreamcastcard->spu_dma_work));
 	/* Timer may already be running */
-	if (unlikely(dreamcastcard->timer.data)) {
+	if (unlikely(dreamcastcard->timer_substream)) {
 		mod_timer(&dreamcastcard->timer, jiffies + 4);
 		return;
 	}
-	setup_timer(&dreamcastcard->timer, aica_period_elapsed,
-		    (unsigned long) substream);
+	timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
+	dreamcastcard->timer_substream = substream;
 	mod_timer(&dreamcastcard->timer, jiffies + 4);
 }
 
@@ -379,7 +379,7 @@ static int snd_aicapcm_pcm_close(struct snd_pcm_substream
 {
 	struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
 	flush_work(&(dreamcastcard->spu_dma_work));
-	if (dreamcastcard->timer.data)
+	if (dreamcastcard->timer_substream)
 		del_timer(&dreamcastcard->timer);
 	kfree(dreamcastcard->channel);
 	spu_disable();
@@ -600,7 +600,7 @@ static int snd_aica_probe(struct platform_device *devptr)
 {
 	int err;
 	struct snd_card_aica *dreamcastcard;
-	dreamcastcard = kmalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
+	dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
 	if (unlikely(!dreamcastcard))
 		return -ENOMEM;
 	err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
@@ -619,8 +619,6 @@ static int snd_aica_probe(struct platform_device *devptr)
 	err = snd_aicapcmchip(dreamcastcard, 0);
 	if (unlikely(err < 0))
 		goto freedreamcast;
-	dreamcastcard->timer.data = 0;
-	dreamcastcard->channel = NULL;
 	/* Add basic controls */
 	err = add_aicamixer_controls(dreamcastcard);
 	if (unlikely(err < 0))
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index a98647ac497c..735f2d0033dd 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3340,9 +3340,9 @@ static irqreturn_t rt5645_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void rt5645_btn_check_callback(unsigned long data)
+static void rt5645_btn_check_callback(struct timer_list *t)
 {
-	struct rt5645_priv *rt5645 = (struct rt5645_priv *)data;
+	struct rt5645_priv *rt5645 = from_timer(rt5645, t, btn_check_timer);
 
 	queue_delayed_work(system_power_efficient_wq,
 		   &rt5645->jack_detect_work, msecs_to_jiffies(5));
@@ -3934,8 +3934,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 		regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
 			RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
 	}
-	setup_timer(&rt5645->btn_check_timer,
-		rt5645_btn_check_callback, (unsigned long)rt5645);
+	timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0);
 
 	INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
 	INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work);
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 6c49f3d6fd96..d40219678700 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -260,7 +260,7 @@ static bool cx81801_cmd_pending;
 static bool ams_delta_muted;
 static DEFINE_SPINLOCK(ams_delta_lock);
 
-static void cx81801_timeout(unsigned long data)
+static void cx81801_timeout(struct timer_list *unused)
 {
 	int muted;
 
@@ -349,7 +349,7 @@ static void cx81801_receive(struct tty_struct *tty,
 		/* First modem response, complete setup procedure */
 
 		/* Initialize timer used for config pulse generation */
-		setup_timer(&cx81801_timer, cx81801_timeout, 0);
+		timer_setup(&cx81801_timer, cx81801_timeout, 0);
 
 		v253_ops.receive_buf(tty, cp, fp, count);
 
diff --git a/sound/synth/emux/emux.c b/sound/synth/emux/emux.c
index b9981e8c0027..b840ff2dcfbb 100644
--- a/sound/synth/emux/emux.c
+++ b/sound/synth/emux/emux.c
@@ -53,7 +53,7 @@ int snd_emux_new(struct snd_emux **remu)
 	emu->max_voices = 0;
 	emu->use_time = 0;
 
-	setup_timer(&emu->tlist, snd_emux_timer_callback, (unsigned long)emu);
+	timer_setup(&emu->tlist, snd_emux_timer_callback, 0);
 	emu->timer_active = 0;
 
 	*remu = emu;
diff --git a/sound/synth/emux/emux_oss.c b/sound/synth/emux/emux_oss.c
index de19e108974a..764ff4bc2089 100644
--- a/sound/synth/emux/emux_oss.c
+++ b/sound/synth/emux/emux_oss.c
@@ -430,7 +430,6 @@ gusspec_control(struct snd_emux *emu, struct snd_emux_port *port, int cmd,
 {
 	int voice;
 	unsigned short p1;
-	short p2;
 	int plong;
 	struct snd_midi_channel *chan;
 
@@ -445,7 +444,6 @@ gusspec_control(struct snd_emux *emu, struct snd_emux_port *port, int cmd,
 	chan = &port->chset.channels[voice];
 
 	p1 = *(unsigned short *) &event[4];
-	p2 = *(short *) &event[6];
 	plong = *(int*) &event[4];
 
 	switch (cmd) {
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 599551b5af44..9fa696b0dbde 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -202,9 +202,9 @@ snd_emux_note_off(void *p, int note, int vel, struct snd_midi_channel *chan)
  *
  * release the pending note-offs
  */
-void snd_emux_timer_callback(unsigned long data)
+void snd_emux_timer_callback(struct timer_list *t)
 {
-	struct snd_emux *emu = (struct snd_emux *) data;
+	struct snd_emux *emu = from_timer(emu, t, tlist);
 	struct snd_emux_voice *vp;
 	unsigned long flags;
 	int ch, do_again = 0;
diff --git a/sound/synth/emux/emux_voice.h b/sound/synth/emux/emux_voice.h
index a7073c371bcc..326fa8993d7b 100644
--- a/sound/synth/emux/emux_voice.h
+++ b/sound/synth/emux/emux_voice.h
@@ -55,7 +55,7 @@ void snd_emux_update_channel(struct snd_emux_port *port,
 			     struct snd_midi_channel *chan, int update);
 void snd_emux_update_port(struct snd_emux_port *port, int update);
 
-void snd_emux_timer_callback(unsigned long data);
+void snd_emux_timer_callback(struct timer_list *t);
 
 /* emux_effect.c */
 #ifdef SNDRV_EMUX_USE_RAW_EFFECT
diff --git a/sound/usb/6fire/chip.c b/sound/usb/6fire/chip.c
index c7641cb50616..17d5e3ee6d73 100644
--- a/sound/usb/6fire/chip.c
+++ b/sound/usb/6fire/chip.c
@@ -174,11 +174,9 @@ destroy_chip:
 static void usb6fire_chip_disconnect(struct usb_interface *intf)
 {
 	struct sfire_chip *chip;
-	struct snd_card *card;
 
 	chip = usb_get_intfdata(intf);
 	if (chip) { /* if !chip, fw upload has been performed */
-		card = chip->card;
 		chip->intf_count--;
 		if (!chip->intf_count) {
 			mutex_lock(&register_mutex);
diff --git a/sound/usb/bcd2000/bcd2000.c b/sound/usb/bcd2000/bcd2000.c
index 7371e5b06035..a6408209d7f1 100644
--- a/sound/usb/bcd2000/bcd2000.c
+++ b/sound/usb/bcd2000/bcd2000.c
@@ -342,6 +342,13 @@ static int bcd2000_init_midi(struct bcd2000 *bcd2k)
 				bcd2k->midi_out_buf, BUFSIZE,
 				bcd2000_output_complete, bcd2k, 1);
 
+	/* sanity checks of EPs before actually submitting */
+	if (usb_urb_ep_type_check(bcd2k->midi_in_urb) ||
+	    usb_urb_ep_type_check(bcd2k->midi_out_urb)) {
+		dev_err(&bcd2k->dev->dev, "invalid MIDI EP\n");
+		return -EINVAL;
+	}
+
 	bcd2000_init_device(bcd2k);
 
 	return 0;
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index d8409d9ae55b..d55ca48de3ea 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -461,6 +461,13 @@ static int init_card(struct snd_usb_caiaqdev *cdev)
 			  cdev->midi_out_buf, EP1_BUFSIZE,
 			  snd_usb_caiaq_midi_output_done, cdev);
 
+	/* sanity checks of EPs before actually submitting */
+	if (usb_urb_ep_type_check(&cdev->ep1_in_urb) ||
+	    usb_urb_ep_type_check(&cdev->midi_out_urb)) {
+		dev_err(dev, "invalid EPs\n");
+		return -EINVAL;
+	}
+
 	init_waitqueue_head(&cdev->ep1_wait_queue);
 	init_waitqueue_head(&cdev->prepare_wait_queue);
 
diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c
index 4b3fb91deecd..e883659ea6e7 100644
--- a/sound/usb/caiaq/input.c
+++ b/sound/usb/caiaq/input.c
@@ -718,6 +718,9 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *cdev)
 				  usb_rcvbulkpipe(usb_dev, 0x4),
 				  cdev->ep4_in_buf, EP4_BUFSIZE,
 				  snd_usb_caiaq_ep4_reply_dispatch, cdev);
+		ret = usb_urb_ep_type_check(cdev->ep4_in_urb);
+		if (ret < 0)
+			goto exit_free_idev;
 
 		snd_usb_caiaq_set_auto_msg(cdev, 1, 10, 5);
 
@@ -757,6 +760,9 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *cdev)
 				  usb_rcvbulkpipe(usb_dev, 0x4),
 				  cdev->ep4_in_buf, EP4_BUFSIZE,
 				  snd_usb_caiaq_ep4_reply_dispatch, cdev);
+		ret = usb_urb_ep_type_check(cdev->ep4_in_urb);
+		if (ret < 0)
+			goto exit_free_idev;
 
 		snd_usb_caiaq_set_auto_msg(cdev, 1, 10, 5);
 
@@ -802,6 +808,9 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *cdev)
 				  usb_rcvbulkpipe(usb_dev, 0x4),
 				  cdev->ep4_in_buf, EP4_BUFSIZE,
 				  snd_usb_caiaq_ep4_reply_dispatch, cdev);
+		ret = usb_urb_ep_type_check(cdev->ep4_in_urb);
+		if (ret < 0)
+			goto exit_free_idev;
 
 		snd_usb_caiaq_set_auto_msg(cdev, 1, 10, 5);
 		break;
diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c
index 175d8d6b7f59..396c317115b1 100644
--- a/sound/usb/hiface/pcm.c
+++ b/sound/usb/hiface/pcm.c
@@ -541,6 +541,8 @@ static int hiface_pcm_init_urb(struct pcm_urb *urb,
 	usb_fill_bulk_urb(&urb->instance, chip->dev,
 			  usb_sndbulkpipe(chip->dev, ep), (void *)urb->buffer,
 			  PCM_PACKET_SIZE, handler, urb);
+	if (usb_urb_ep_type_check(&urb->instance))
+		return -EINVAL;
 	init_usb_anchor(&urb->submitted);
 
 	return 0;
@@ -599,9 +601,12 @@ int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq)
 	mutex_init(&rt->stream_mutex);
 	spin_lock_init(&rt->playback.lock);
 
-	for (i = 0; i < PCM_N_URBS; i++)
-		hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP,
+	for (i = 0; i < PCM_N_URBS; i++) {
+		ret = hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP,
 				    hiface_pcm_out_urb_handler);
+		if (ret < 0)
+			return ret;
+	}
 
 	ret = snd_pcm_new(chip->card, "USB-SPDIF Audio", 0, 1, 0, &pcm);
 	if (ret < 0) {
diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
index 7c812565f90d..947d6168f24a 100644
--- a/sound/usb/line6/capture.c
+++ b/sound/usb/line6/capture.c
@@ -248,7 +248,7 @@ static int snd_line6_capture_close(struct snd_pcm_substream *substream)
 }
 
 /* capture operators */
-struct snd_pcm_ops snd_line6_capture_ops = {
+const struct snd_pcm_ops snd_line6_capture_ops = {
 	.open = snd_line6_capture_open,
 	.close = snd_line6_capture_close,
 	.ioctl = snd_pcm_lib_ioctl,
diff --git a/sound/usb/line6/capture.h b/sound/usb/line6/capture.h
index 890b21bff18c..b67ccc39fd25 100644
--- a/sound/usb/line6/capture.h
+++ b/sound/usb/line6/capture.h
@@ -17,7 +17,7 @@
 #include "driver.h"
 #include "pcm.h"
 
-extern struct snd_pcm_ops snd_line6_capture_ops;
+extern const struct snd_pcm_ops snd_line6_capture_ops;
 
 extern void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf,
 			       int fsize);
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index c8f723c3a033..4f9613e5fc9e 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -78,6 +78,13 @@ static int line6_start_listen(struct usb_line6 *line6)
 			line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
 			line6_data_received, line6);
 	}
+
+	/* sanity checks of EP before actually submitting */
+	if (usb_urb_ep_type_check(line6->urb_listen)) {
+		dev_err(line6->ifcdev, "invalid control EP\n");
+		return -EINVAL;
+	}
+
 	line6->urb_listen->actual_length = 0;
 	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
 	return err;
@@ -168,26 +175,33 @@ static int line6_send_raw_message_async_part(struct message *msg,
 	}
 
 	msg->done += bytes;
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
 
-	if (retval < 0) {
-		dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
-			__func__, retval);
-		usb_free_urb(urb);
-		kfree(msg);
-		return retval;
-	}
+	/* sanity checks of EP before actually submitting */
+	retval = usb_urb_ep_type_check(urb);
+	if (retval < 0)
+		goto error;
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval < 0)
+		goto error;
 
 	return 0;
+
+ error:
+	dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+		__func__, retval);
+	usb_free_urb(urb);
+	kfree(msg);
+	return retval;
 }
 
 /*
 	Setup and start timer.
 */
 void line6_start_timer(struct timer_list *timer, unsigned long msecs,
-		       void (*function)(unsigned long), unsigned long data)
+		       void (*function)(struct timer_list *t))
 {
-	setup_timer(timer, function, data);
+	timer->function = (TIMER_FUNC_TYPE)function;
 	mod_timer(timer, jiffies + msecs_to_jiffies(msecs));
 }
 EXPORT_SYMBOL_GPL(line6_start_timer);
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index dc97895547be..61425597eb61 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -198,8 +198,7 @@ extern int line6_send_sysex_message(struct usb_line6 *line6,
 extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count);
 extern void line6_start_timer(struct timer_list *timer, unsigned long msecs,
-			      void (*function)(unsigned long),
-			      unsigned long data);
+			      void (*function)(struct timer_list *t));
 extern int line6_version_request_async(struct usb_line6 *line6);
 extern int line6_write_data(struct usb_line6 *line6, unsigned address,
 			    void *data, unsigned datalen);
diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c
index 1d3a23b02d68..6d7cde56a355 100644
--- a/sound/usb/line6/midi.c
+++ b/sound/usb/line6/midi.c
@@ -130,16 +130,21 @@ static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
 			 transfer_buffer, length, midi_sent, line6,
 			 line6->interval);
 	urb->actual_length = 0;
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	retval = usb_urb_ep_type_check(urb);
+	if (retval < 0)
+		goto error;
 
-	if (retval < 0) {
-		dev_err(line6->ifcdev, "usb_submit_urb failed\n");
-		usb_free_urb(urb);
-		return retval;
-	}
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval < 0)
+		goto error;
 
 	++line6->line6midi->num_active_send_urbs;
 	return 0;
+
+ error:
+	dev_err(line6->ifcdev, "usb_submit_urb failed\n");
+	usb_free_urb(urb);
+	return retval;
 }
 
 static int line6_midi_output_open(struct snd_rawmidi_substream *substream)
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index 812d18191e01..819e9b2d1d6e 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -393,7 +393,7 @@ static int snd_line6_playback_close(struct snd_pcm_substream *substream)
 }
 
 /* playback operators */
-struct snd_pcm_ops snd_line6_playback_ops = {
+const struct snd_pcm_ops snd_line6_playback_ops = {
 	.open = snd_line6_playback_open,
 	.close = snd_line6_playback_close,
 	.ioctl = snd_pcm_lib_ioctl,
diff --git a/sound/usb/line6/playback.h b/sound/usb/line6/playback.h
index 51fce29e8726..d8d3b8a07a72 100644
--- a/sound/usb/line6/playback.h
+++ b/sound/usb/line6/playback.h
@@ -27,7 +27,7 @@
  */
 #define USE_CLEAR_BUFFER_WORKAROUND 1
 
-extern struct snd_pcm_ops snd_line6_playback_ops;
+extern const struct snd_pcm_ops snd_line6_playback_ops;
 
 extern int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm);
 extern int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm);
diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
index 358224cc5638..020c81818951 100644
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -174,7 +174,7 @@ static const char pod_version_header[] = {
 };
 
 /* forward declarations: */
-static void pod_startup2(unsigned long data);
+static void pod_startup2(struct timer_list *t);
 static void pod_startup3(struct usb_line6_pod *pod);
 
 static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
@@ -286,13 +286,12 @@ static void pod_startup1(struct usb_line6_pod *pod)
 	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
 
 	/* delay startup procedure: */
-	line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
-			  (unsigned long)pod);
+	line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2);
 }
 
-static void pod_startup2(unsigned long data)
+static void pod_startup2(struct timer_list *t)
 {
-	struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
+	struct usb_line6_pod *pod = from_timer(pod, t, startup_timer);
 	struct usb_line6 *line6 = &pod->line6;
 
 	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
@@ -413,7 +412,7 @@ static int pod_init(struct usb_line6 *line6,
 	line6->process_message = line6_pod_process_message;
 	line6->disconnect = line6_pod_disconnect;
 
-	init_timer(&pod->startup_timer);
+	timer_setup(&pod->startup_timer, NULL, 0);
 	INIT_WORK(&pod->startup_work, pod_startup4);
 
 	/* create sysfs entries: */
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
index 451007c27743..36ed9c85c0eb 100644
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -39,7 +39,8 @@ enum {
 	LINE6_PODHD500_1,
 	LINE6_PODX3,
 	LINE6_PODX3LIVE,
-	LINE6_PODHD500X
+	LINE6_PODHD500X,
+	LINE6_PODHDDESKTOP
 };
 
 struct usb_line6_podhd {
@@ -157,7 +158,7 @@ static struct line6_pcm_properties podx3_pcm_properties = {
 };
 static struct usb_driver podhd_driver;
 
-static void podhd_startup_start_workqueue(unsigned long data);
+static void podhd_startup_start_workqueue(struct timer_list *t);
 static void podhd_startup_workqueue(struct work_struct *work);
 static int podhd_startup_finalize(struct usb_line6_podhd *pod);
 
@@ -207,12 +208,12 @@ static void podhd_startup(struct usb_line6_podhd *pod)
 
 	/* delay startup procedure: */
 	line6_start_timer(&pod->startup_timer, PODHD_STARTUP_DELAY,
-		podhd_startup_start_workqueue, (unsigned long)pod);
+		podhd_startup_start_workqueue);
 }
 
-static void podhd_startup_start_workqueue(unsigned long data)
+static void podhd_startup_start_workqueue(struct timer_list *t)
 {
-	struct usb_line6_podhd *pod = (struct usb_line6_podhd *)data;
+	struct usb_line6_podhd *pod = from_timer(pod, t, startup_timer);
 
 	CHECK_STARTUP_PROGRESS(pod->startup_progress,
 		PODHD_STARTUP_SCHEDULE_WORKQUEUE);
@@ -318,7 +319,7 @@ static int podhd_init(struct usb_line6 *line6,
 
 	line6->disconnect = podhd_disconnect;
 
-	init_timer(&pod->startup_timer);
+	timer_setup(&pod->startup_timer, NULL, 0);
 	INIT_WORK(&pod->startup_work, podhd_startup_workqueue);
 
 	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
@@ -379,6 +380,7 @@ static const struct usb_device_id podhd_id_table[] = {
 	{ LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 },
 	{ LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE },
 	{ LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X },
+	{ LINE6_IF_NUM(0x4156, 0), .driver_info = LINE6_PODHDDESKTOP },
 	{}
 };
 
@@ -465,6 +467,18 @@ static const struct line6_properties podhd_properties_table[] = {
 		.ep_audio_r = 0x86,
 		.ep_audio_w = 0x02,
 	},
+	[LINE6_PODHDDESKTOP] = {
+		.id = "PODHDDESKTOP",
+		.name = "POD HDDESKTOP",
+		.capabilities    = LINE6_CAP_CONTROL
+			| LINE6_CAP_PCM | LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ctrl_if = 1,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
 };
 
 /*
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
index ba7975c0d03d..750467fb95db 100644
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -241,9 +241,9 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
-static void toneport_start_pcm(unsigned long arg)
+static void toneport_start_pcm(struct timer_list *t)
 {
-	struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg;
+	struct usb_line6_toneport *toneport = from_timer(toneport, t, timer);
 	struct usb_line6 *line6 = &toneport->line6;
 
 	line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR, true);
@@ -415,8 +415,7 @@ static int toneport_init(struct usb_line6 *line6,
 	struct usb_line6_toneport *toneport =  (struct usb_line6_toneport *) line6;
 
 	toneport->type = id->driver_info;
-	setup_timer(&toneport->timer, toneport_start_pcm,
-		    (unsigned long)toneport);
+	timer_setup(&toneport->timer, toneport_start_pcm, 0);
 
 	line6->disconnect = line6_toneport_disconnect;
 
diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c
index 0c4512d0382e..e8c852b2ce35 100644
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -82,9 +82,9 @@ static const char variax_activate[] = {
 };
 
 /* forward declarations: */
-static void variax_startup2(unsigned long data);
-static void variax_startup4(unsigned long data);
-static void variax_startup5(unsigned long data);
+static void variax_startup2(struct timer_list *t);
+static void variax_startup4(struct timer_list *t);
+static void variax_startup5(struct timer_list *t);
 
 static void variax_activate_async(struct usb_line6_variax *variax, int a)
 {
@@ -106,12 +106,12 @@ static void variax_startup1(struct usb_line6_variax *variax)
 
 	/* delay startup procedure: */
 	line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
-			  variax_startup2, (unsigned long)variax);
+			  variax_startup2);
 }
 
-static void variax_startup2(unsigned long data)
+static void variax_startup2(struct timer_list *t)
 {
-	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+	struct usb_line6_variax *variax = from_timer(variax, t, startup_timer1);
 	struct usb_line6 *line6 = &variax->line6;
 
 	/* schedule another startup procedure until startup is complete: */
@@ -120,7 +120,7 @@ static void variax_startup2(unsigned long data)
 
 	variax->startup_progress = VARIAX_STARTUP_VERSIONREQ;
 	line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
-			  variax_startup2, (unsigned long)variax);
+			  variax_startup2);
 
 	/* request firmware version: */
 	line6_version_request_async(line6);
@@ -132,12 +132,12 @@ static void variax_startup3(struct usb_line6_variax *variax)
 
 	/* delay startup procedure: */
 	line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY3,
-			  variax_startup4, (unsigned long)variax);
+			  variax_startup4);
 }
 
-static void variax_startup4(unsigned long data)
+static void variax_startup4(struct timer_list *t)
 {
-	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+	struct usb_line6_variax *variax = from_timer(variax, t, startup_timer2);
 
 	CHECK_STARTUP_PROGRESS(variax->startup_progress,
 			       VARIAX_STARTUP_ACTIVATE);
@@ -145,12 +145,12 @@ static void variax_startup4(unsigned long data)
 	/* activate device: */
 	variax_activate_async(variax, 1);
 	line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY4,
-			  variax_startup5, (unsigned long)variax);
+			  variax_startup5);
 }
 
-static void variax_startup5(unsigned long data)
+static void variax_startup5(struct timer_list *t)
 {
-	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+	struct usb_line6_variax *variax = from_timer(variax, t, startup_timer2);
 
 	CHECK_STARTUP_PROGRESS(variax->startup_progress,
 			       VARIAX_STARTUP_WORKQUEUE);
@@ -190,7 +190,7 @@ static void line6_variax_process_message(struct usb_line6 *line6)
 		} else if (memcmp(buf + 1, variax_init_done + 1,
 				  sizeof(variax_init_done) - 1) == 0) {
 			/* notify of complete initialization: */
-			variax_startup4((unsigned long)variax);
+			variax_startup4(&variax->startup_timer2);
 		}
 		break;
 	}
@@ -222,8 +222,8 @@ static int variax_init(struct usb_line6 *line6,
 	line6->process_message = line6_variax_process_message;
 	line6->disconnect = line6_variax_disconnect;
 
-	init_timer(&variax->startup_timer1);
-	init_timer(&variax->startup_timer2);
+	timer_setup(&variax->startup_timer1, NULL, 0);
+	timer_setup(&variax->startup_timer2, NULL, 0);
 	INIT_WORK(&variax->startup_work, variax_startup6);
 
 	/* initialize USB buffers: */
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index a92e2b2a91ec..2c1aaa3292bf 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -352,9 +352,9 @@ static void snd_usbmidi_out_tasklet(unsigned long data)
 }
 
 /* called after transfers had been interrupted due to some USB error */
-static void snd_usbmidi_error_timer(unsigned long data)
+static void snd_usbmidi_error_timer(struct timer_list *t)
 {
-	struct snd_usb_midi *umidi = (struct snd_usb_midi *)data;
+	struct snd_usb_midi *umidi = from_timer(umidi, t, error_timer);
 	unsigned int i, j;
 
 	spin_lock(&umidi->disc_lock);
@@ -1282,6 +1282,7 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
 	unsigned int pipe;
 	int length;
 	unsigned int i;
+	int err;
 
 	rep->in = NULL;
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
@@ -1292,8 +1293,8 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
 	for (i = 0; i < INPUT_URBS; ++i) {
 		ep->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
 		if (!ep->urbs[i]) {
-			snd_usbmidi_in_endpoint_delete(ep);
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto error;
 		}
 	}
 	if (ep_info->in_interval)
@@ -1305,8 +1306,8 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
 		buffer = usb_alloc_coherent(umidi->dev, length, GFP_KERNEL,
 					    &ep->urbs[i]->transfer_dma);
 		if (!buffer) {
-			snd_usbmidi_in_endpoint_delete(ep);
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto error;
 		}
 		if (ep_info->in_interval)
 			usb_fill_int_urb(ep->urbs[i], umidi->dev,
@@ -1318,10 +1319,20 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
 					  pipe, buffer, length,
 					  snd_usbmidi_in_urb_complete, ep);
 		ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+		err = usb_urb_ep_type_check(ep->urbs[i]);
+		if (err < 0) {
+			dev_err(&umidi->dev->dev, "invalid MIDI in EP %x\n",
+				ep_info->in_ep);
+			goto error;
+		}
 	}
 
 	rep->in = ep;
 	return 0;
+
+ error:
+	snd_usbmidi_in_endpoint_delete(ep);
+	return -ENOMEM;
 }
 
 /*
@@ -1357,6 +1368,7 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 	unsigned int i;
 	unsigned int pipe;
 	void *buffer;
+	int err;
 
 	rep->out = NULL;
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
@@ -1367,8 +1379,8 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 	for (i = 0; i < OUTPUT_URBS; ++i) {
 		ep->urbs[i].urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!ep->urbs[i].urb) {
-			snd_usbmidi_out_endpoint_delete(ep);
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto error;
 		}
 		ep->urbs[i].ep = ep;
 	}
@@ -1406,8 +1418,8 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 					    ep->max_transfer, GFP_KERNEL,
 					    &ep->urbs[i].urb->transfer_dma);
 		if (!buffer) {
-			snd_usbmidi_out_endpoint_delete(ep);
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto error;
 		}
 		if (ep_info->out_interval)
 			usb_fill_int_urb(ep->urbs[i].urb, umidi->dev,
@@ -1419,6 +1431,12 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 					  pipe, buffer, ep->max_transfer,
 					  snd_usbmidi_out_urb_complete,
 					  &ep->urbs[i]);
+		err = usb_urb_ep_type_check(ep->urbs[i].urb);
+		if (err < 0) {
+			dev_err(&umidi->dev->dev, "invalid MIDI out EP %x\n",
+				ep_info->out_ep);
+			goto error;
+		}
 		ep->urbs[i].urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 	}
 
@@ -1437,6 +1455,10 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
 
 	rep->out = ep;
 	return 0;
+
+ error:
+	snd_usbmidi_out_endpoint_delete(ep);
+	return err;
 }
 
 /*
@@ -2347,8 +2369,7 @@ int __snd_usbmidi_create(struct snd_card *card,
 		usb_id = USB_ID(le16_to_cpu(umidi->dev->descriptor.idVendor),
 			       le16_to_cpu(umidi->dev->descriptor.idProduct));
 	umidi->usb_id = usb_id;
-	setup_timer(&umidi->error_timer, snd_usbmidi_error_timer,
-		    (unsigned long)umidi);
+	timer_setup(&umidi->error_timer, snd_usbmidi_error_timer, 0);
 
 	/* detect the endpoint(s) to use */
 	memset(endpoints, 0, sizeof(endpoints));
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 20624320b753..77eecaa4db1f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1128,30 +1128,24 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip)
 	/* devices which do not support reading the sample rate. */
 	switch (chip->usb_id) {
 	case USB_ID(0x041E, 0x4080): /* Creative Live Cam VF0610 */
-	case USB_ID(0x045E, 0x075D): /* MS Lifecam Cinema  */
-	case USB_ID(0x045E, 0x076D): /* MS Lifecam HD-5000 */
-	case USB_ID(0x045E, 0x076E): /* MS Lifecam HD-5001 */
-	case USB_ID(0x045E, 0x076F): /* MS Lifecam HD-6000 */
-	case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */
-	case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */
-	case USB_ID(0x047F, 0x02F7): /* Plantronics BT-600 */
-	case USB_ID(0x047F, 0x0415): /* Plantronics BT-300 */
-	case USB_ID(0x047F, 0xAA05): /* Plantronics DA45 */
-	case USB_ID(0x047F, 0xC022): /* Plantronics C310 */
-	case USB_ID(0x047F, 0xC02F): /* Plantronics P610 */
-	case USB_ID(0x047F, 0xC036): /* Plantronics C520-M */
 	case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */
 	case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */
 	case USB_ID(0x05A3, 0x9420): /* ELP HD USB Camera */
 	case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
 	case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */
 	case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
-	case USB_ID(0x1de7, 0x0013): /* Phoenix Audio MT202exe */
-	case USB_ID(0x1de7, 0x0014): /* Phoenix Audio TMX320 */
-	case USB_ID(0x1de7, 0x0114): /* Phoenix Audio MT202pcs */
 	case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */
 		return true;
 	}
+
+	/* devices of these vendors don't support reading rate, either */
+	switch (USB_ID_VENDOR(chip->usb_id)) {
+	case 0x045E: /* MS Lifecam */
+	case 0x047F: /* Plantronics */
+	case 0x1de7: /* Phoenix Audio */
+		return true;
+	}
+
 	return false;
 }
 
diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c
index e229abd21652..b0f8979ff2d2 100644
--- a/sound/usb/usx2y/usb_stream.c
+++ b/sound/usb/usx2y/usb_stream.c
@@ -56,7 +56,7 @@ check:
 		    lb, s->period_size);
 }
 
-static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
+static int init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
 			   struct urb **urbs, char *transfer,
 			   struct usb_device *dev, int pipe)
 {
@@ -77,6 +77,8 @@ static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
 		urb->interval = 1;
 		if (usb_pipeout(pipe))
 			continue;
+		if (usb_urb_ep_type_check(urb))
+			return -EINVAL;
 
 		urb->transfer_buffer_length = transfer_length;
 		desc = urb->iso_frame_desc;
@@ -87,9 +89,11 @@ static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
 			desc[p].length = maxpacket;
 		}
 	}
+
+	return 0;
 }
 
-static void init_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
+static int init_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
 		      struct usb_device *dev, int in_pipe, int out_pipe)
 {
 	struct usb_stream	*s = sk->s;
@@ -103,9 +107,12 @@ static void init_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
 		sk->outurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL);
 	}
 
-	init_pipe_urbs(sk, use_packsize, sk->inurb, indata, dev, in_pipe);
-	init_pipe_urbs(sk, use_packsize, sk->outurb, sk->write_page, dev,
-		       out_pipe);
+	if (init_pipe_urbs(sk, use_packsize, sk->inurb, indata, dev, in_pipe) ||
+	    init_pipe_urbs(sk, use_packsize, sk->outurb, sk->write_page, dev,
+			   out_pipe))
+		return -EINVAL;
+
+	return 0;
 }
 
 
@@ -226,7 +233,11 @@ struct usb_stream *usb_stream_new(struct usb_stream_kernel *sk,
 	else
 		sk->freqn = get_usb_high_speed_rate(sample_rate);
 
-	init_urbs(sk, use_packsize, dev, in_pipe, out_pipe);
+	if (init_urbs(sk, use_packsize, dev, in_pipe, out_pipe) < 0) {
+		usb_stream_free(sk);
+		return NULL;
+	}
+
 	sk->s->state = usb_stream_stopped;
 out:
 	return sk->s;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 4569c0efac0a..0ddf29267d70 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -279,6 +279,9 @@ int usX2Y_AsyncSeq04_init(struct usX2Ydev *usX2Y)
 						usX2Y->AS04.buffer + URB_DataLen_AsyncSeq*i, 0,
 						i_usX2Y_Out04Int, usX2Y
 				);
+			err = usb_urb_ep_type_check(usX2Y->AS04.urb[i]);
+			if (err < 0)
+				break;
 		}
 	return err;
 }
@@ -298,6 +301,8 @@ int usX2Y_In04_init(struct usX2Ydev *usX2Y)
 			 usX2Y->In04Buf, 21,
 			 i_usX2Y_In04Int, usX2Y,
 			 10);
+	if (usb_urb_ep_type_check(usX2Y->In04urb))
+		return -EINVAL;
 	return usb_submit_urb(usX2Y->In04urb, GFP_KERNEL);
 }
 
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index f93b355756e6..345e439aa95b 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -677,6 +677,9 @@ static int usX2Y_rate_set(struct usX2Ydev *usX2Y, int rate)
 			usb_fill_bulk_urb(us->urb[i], usX2Y->dev, usb_sndbulkpipe(usX2Y->dev, 4),
 					  usbdata + i, 2, i_usX2Y_04Int, usX2Y);
 		}
+		err = usb_urb_ep_type_check(us->urb[0]);
+		if (err < 0)
+			goto cleanup;
 		us->submitted =	0;
 		us->len =	NOOF_SETRATE_URBS;
 		usX2Y->US04 =	us;