diff options
author | Gergo Koteles <soyer@irl.hu> | 2024-03-26 17:18:45 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2024-03-27 11:19:11 +0100 |
commit | ae065d0ce9e36ca4efdfb9b96ce3395bd1c19372 (patch) | |
tree | 4163b88eca4aca616c5810f290999333589932ab /sound | |
parent | 7590ac2249ebfa6a40db9055fa62d349e9c8e6a6 (diff) |
ALSA: hda/tas2781: remove digital gain kcontrol
The "Speaker Digital Gain" kcontrol controls the TAS2781_DVC_LVL (0x1A)
register. Unfortunately the tas2563 does not have DVC_LVL, but has
INT_MASK0 in 0x1A, which has been misused so far.
Since commit c1947ce61ff4 ("ALSA: hda/realtek: tas2781: enable subwoofer
volume control") the volume of the tas2781 amplifiers can be controlled
by the master volume, so this digital gain kcontrol is not needed.
Remove it.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <741fc21db994efd58f83e7aef38931204961e5b2.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
-rw-r--r-- | sound/pci/hda/tas2781_hda_i2c.c | 37 |
1 files changed, 1 insertions, 36 deletions
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 4475cea8e9f7..5acb475c10a7 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -89,7 +89,7 @@ struct tas2781_hda { struct snd_kcontrol *dsp_prog_ctl; struct snd_kcontrol *dsp_conf_ctl; struct snd_kcontrol *prof_ctl; - struct snd_kcontrol *snd_ctls[3]; + struct snd_kcontrol *snd_ctls[2]; }; static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data) @@ -294,27 +294,6 @@ static int tasdevice_config_put(struct snd_kcontrol *kcontrol, return ret; } -/* - * tas2781_digital_getvol - get the volum control - * @kcontrol: control pointer - * @ucontrol: User data - * Customer Kcontrol for tas2781 is primarily for regmap booking, paging - * depends on internal regmap mechanism. - * tas2781 contains book and page two-level register map, especially - * book switching will set the register BXXP00R7F, after switching to the - * correct book, then leverage the mechanism for paging to access the - * register. - */ -static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - - return tasdevice_digital_getvol(tas_priv, ucontrol, mc); -} - static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -325,17 +304,6 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, return tasdevice_amp_getvol(tas_priv, ucontrol, mc); } -static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - - /* The check of the given value is in tasdevice_digital_putvol. */ - return tasdevice_digital_putvol(tas_priv, ucontrol, mc); -} - static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -381,9 +349,6 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, tas2781_amp_putvol, amp_vol_tlv), - ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, - 0, 0, 200, 1, tas2781_digital_getvol, - tas2781_digital_putvol, dvc_tlv), ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, tas2781_force_fwload_get, tas2781_force_fwload_put), }; |