summaryrefslogtreecommitdiff
path: root/sound/soc/intel
diff options
context:
space:
mode:
authorJeeja KP <jeeja.kp@intel.com>2015-10-07 11:31:53 +0100
committerMark Brown <broonie@kernel.org>2015-10-07 15:30:15 +0100
commitf7590d4f1565b0d609d25113c37b9bea8a13e9f7 (patch)
treea74c8f78945d5663c6541f396eb7921eb5ccb452 /sound/soc/intel
parente4e2d2f45284f620eeb9eea25570838b2a42c968 (diff)
ASoC: Intel: Skylake: Add module configuration helpers
To configure a module, driver needs to send input and output PCM params for a module in DSP. The FE PCM params come from hw_params ie from user, for a BE they also come from hw_params but from BE-link fixups. So based on PCM params required driver has to find a converter module (src/updown/format) and then do the conversion and calculate PCM params in these pipelines In this patch we add the helper modules which allow driver to do these calculations. Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound/soc/intel')
-rw-r--r--sound/soc/intel/skylake/skl-topology.c140
1 files changed, 140 insertions, 0 deletions
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index b0ee1fe05274..56baf9d88f28 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -27,6 +27,10 @@
#include "skl.h"
#include "skl-tplg-interface.h"
+#define SKL_CH_FIXUP_MASK (1 << 0)
+#define SKL_RATE_FIXUP_MASK (1 << 1)
+#define SKL_FMT_FIXUP_MASK (1 << 2)
+
/*
* SKL DSP driver modelling uses only few DAPM widgets so for rest we will
* ignore. This helpers checks if the SKL driver handles this widget type
@@ -119,6 +123,137 @@ skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig)
skl->resource.mem -= mconfig->pipe->memory_pages;
}
+
+static void skl_dump_mconfig(struct skl_sst *ctx,
+ struct skl_module_cfg *mcfg)
+{
+ dev_dbg(ctx->dev, "Dumping config\n");
+ dev_dbg(ctx->dev, "Input Format:\n");
+ dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt.channels);
+ dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt.s_freq);
+ dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt.ch_cfg);
+ dev_dbg(ctx->dev, "valid bit depth = %d\n",
+ mcfg->in_fmt.valid_bit_depth);
+ dev_dbg(ctx->dev, "Output Format:\n");
+ dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt.channels);
+ dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt.s_freq);
+ dev_dbg(ctx->dev, "valid bit depth = %d\n",
+ mcfg->out_fmt.valid_bit_depth);
+ dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt.ch_cfg);
+}
+
+static void skl_tplg_update_params(struct skl_module_fmt *fmt,
+ struct skl_pipe_params *params, int fixup)
+{
+ if (fixup & SKL_RATE_FIXUP_MASK)
+ fmt->s_freq = params->s_freq;
+ if (fixup & SKL_CH_FIXUP_MASK)
+ fmt->channels = params->ch;
+ if (fixup & SKL_FMT_FIXUP_MASK)
+ fmt->valid_bit_depth = params->s_fmt;
+}
+
+/*
+ * A pipeline may have modules which impact the pcm parameters, like SRC,
+ * channel converter, format converter.
+ * We need to calculate the output params by applying the 'fixup'
+ * Topology will tell driver which type of fixup is to be applied by
+ * supplying the fixup mask, so based on that we calculate the output
+ *
+ * Now In FE the pcm hw_params is source/target format. Same is applicable
+ * for BE with its hw_params invoked.
+ * here based on FE, BE pipeline and direction we calculate the input and
+ * outfix and then apply that for a module
+ */
+static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg,
+ struct skl_pipe_params *params, bool is_fe)
+{
+ int in_fixup, out_fixup;
+ struct skl_module_fmt *in_fmt, *out_fmt;
+
+ in_fmt = &m_cfg->in_fmt;
+ out_fmt = &m_cfg->out_fmt;
+
+ if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (is_fe) {
+ in_fixup = m_cfg->params_fixup;
+ out_fixup = (~m_cfg->converter) &
+ m_cfg->params_fixup;
+ } else {
+ out_fixup = m_cfg->params_fixup;
+ in_fixup = (~m_cfg->converter) &
+ m_cfg->params_fixup;
+ }
+ } else {
+ if (is_fe) {
+ out_fixup = m_cfg->params_fixup;
+ in_fixup = (~m_cfg->converter) &
+ m_cfg->params_fixup;
+ } else {
+ in_fixup = m_cfg->params_fixup;
+ out_fixup = (~m_cfg->converter) &
+ m_cfg->params_fixup;
+ }
+ }
+
+ skl_tplg_update_params(in_fmt, params, in_fixup);
+ skl_tplg_update_params(out_fmt, params, out_fixup);
+}
+
+/*
+ * A module needs input and output buffers, which are dependent upon pcm
+ * params, so once we have calculate params, we need buffer calculation as
+ * well.
+ */
+static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
+ struct skl_module_cfg *mcfg)
+{
+ int multiplier = 1;
+
+ if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
+ multiplier = 5;
+
+ mcfg->ibs = (mcfg->in_fmt.s_freq / 1000) *
+ (mcfg->in_fmt.channels) *
+ (mcfg->in_fmt.bit_depth >> 3) *
+ multiplier;
+
+ mcfg->obs = (mcfg->out_fmt.s_freq / 1000) *
+ (mcfg->out_fmt.channels) *
+ (mcfg->out_fmt.bit_depth >> 3) *
+ multiplier;
+}
+
+static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w,
+ struct skl_sst *ctx)
+{
+ struct skl_module_cfg *m_cfg = w->priv;
+ struct skl_pipe_params *params = m_cfg->pipe->p_params;
+ int p_conn_type = m_cfg->pipe->conn_type;
+ bool is_fe;
+
+ if (!m_cfg->params_fixup)
+ return;
+
+ dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n",
+ w->name);
+
+ skl_dump_mconfig(ctx, m_cfg);
+
+ if (p_conn_type == SKL_PIPE_CONN_TYPE_FE)
+ is_fe = true;
+ else
+ is_fe = false;
+
+ skl_tplg_update_params_fixup(m_cfg, params, is_fe);
+ skl_tplg_update_buffer_size(ctx, m_cfg);
+
+ dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n",
+ w->name);
+
+ skl_dump_mconfig(ctx, m_cfg);
+}
+
/*
* A pipe can have multiple modules, each of them will be a DAPM widget as
* well. While managing a pipeline we need to get the list of all the
@@ -178,6 +313,11 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
if (!skl_tplg_alloc_pipe_mcps(skl, mconfig))
return -ENOMEM;
+ /*
+ * apply fix/conversion to module params based on
+ * FE/BE params
+ */
+ skl_tplg_update_module_params(w, ctx);
ret = skl_init_module(ctx, mconfig, NULL);
if (ret < 0)
return ret;