Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

1 files changed, 124 insertions, 19 deletions

diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index 9545764ef3eb..c5094b4399e2 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -34,6 +34,24 @@
 #include "rt5670.h"
 #include "rt5670-dsp.h"
 
+#define RT5670_DEV_GPIO     BIT(0)
+#define RT5670_IN2_DIFF     BIT(1)
+#define RT5670_DMIC_EN      BIT(2)
+#define RT5670_DMIC1_IN2P   BIT(3)
+#define RT5670_DMIC1_GPIO6  BIT(4)
+#define RT5670_DMIC1_GPIO7  BIT(5)
+#define RT5670_DMIC2_INR    BIT(6)
+#define RT5670_DMIC2_GPIO8  BIT(7)
+#define RT5670_DMIC3_GPIO5  BIT(8)
+#define RT5670_JD_MODE1     BIT(9)
+#define RT5670_JD_MODE2     BIT(10)
+#define RT5670_JD_MODE3     BIT(11)
+
+static unsigned long rt5670_quirk;
+static unsigned int quirk_override;
+module_param_named(quirk, quirk_override, uint, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
+
 #define RT5670_DEVICE_ID 0x6271
 
 #define RT5670_PR_RANGE_BASE (0xff + 1)
@@ -2582,6 +2600,24 @@ static int rt5670_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
 	return 0;
 }
 
+static int rt5670_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+{
+	struct snd_soc_codec *codec = dai->codec;
+
+	dev_dbg(codec->dev, "%s ratio=%d\n", __func__, ratio);
+	if (dai->id != RT5670_AIF1)
+		return 0;
+
+	if ((ratio % 50) == 0)
+		snd_soc_update_bits(codec, RT5670_GEN_CTRL3,
+			RT5670_TDM_DATA_MODE_SEL, RT5670_TDM_DATA_MODE_50FS);
+	else
+		snd_soc_update_bits(codec, RT5670_GEN_CTRL3,
+			RT5670_TDM_DATA_MODE_SEL, RT5670_TDM_DATA_MODE_NOR);
+
+	return 0;
+}
+
 static int rt5670_set_bias_level(struct snd_soc_codec *codec,
 			enum snd_soc_bias_level level)
 {
@@ -2712,6 +2748,7 @@ static const struct snd_soc_dai_ops rt5670_aif_dai_ops = {
 	.set_fmt = rt5670_set_dai_fmt,
 	.set_tdm_slot = rt5670_set_tdm_slot,
 	.set_pll = rt5670_set_dai_pll,
+	.set_bclk_ratio = rt5670_set_bclk_ratio,
 };
 
 static struct snd_soc_dai_driver rt5670_dai[] = {
@@ -2808,56 +2845,84 @@ static const struct acpi_device_id rt5670_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, rt5670_acpi_match);
 #endif
 
-static const struct dmi_system_id dmi_platform_intel_braswell[] = {
+static int rt5670_quirk_cb(const struct dmi_system_id *id)
+{
+	rt5670_quirk = (unsigned long)id->driver_data;
+	return 1;
+}
+
+static const struct dmi_system_id dmi_platform_intel_quirks[] = {
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Intel Braswell",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
 			DMI_MATCH(DMI_BOARD_NAME, "Braswell CRB"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC1_IN2P |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE1),
 	},
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Dell Wyse 3040",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Wyse 3040"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC1_IN2P |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE1),
 	},
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Lenovo Thinkpad Tablet 10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC1_IN2P |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE1),
 	},
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Lenovo Thinkpad Tablet 10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC1_IN2P |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE1),
 	},
-	{}
-};
-
-static const struct dmi_system_id dmi_platform_intel_bytcht_jdmode2[] = {
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Lenovo Thinkpad Tablet 10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC1_IN2P |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE2),
 	},
-	{}
-};
-
-static const struct dmi_system_id dmi_platform_intel_bytcht_jdmode3[] = {
 	{
+		.callback = rt5670_quirk_cb,
 		.ident = "Dell Venue 8 Pro 5855",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5855"),
 		},
+		.driver_data = (unsigned long *)(RT5670_DMIC_EN |
+						 RT5670_DMIC2_INR |
+						 RT5670_DEV_GPIO |
+						 RT5670_JD_MODE3),
 	},
 	{}
 };
@@ -2881,21 +2946,61 @@ static int rt5670_i2c_probe(struct i2c_client *i2c,
 	if (pdata)
 		rt5670->pdata = *pdata;
 
-	if (dmi_check_system(dmi_platform_intel_braswell)) {
-		rt5670->pdata.dmic_en = true;
-		rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P;
+	dmi_check_system(dmi_platform_intel_quirks);
+	if (quirk_override) {
+		dev_info(&i2c->dev, "Overriding quirk 0x%x => 0x%x\n",
+			 (unsigned int)rt5670_quirk, quirk_override);
+		rt5670_quirk = quirk_override;
+	}
+
+	if (rt5670_quirk & RT5670_DEV_GPIO) {
 		rt5670->pdata.dev_gpio = true;
-		rt5670->pdata.jd_mode = 1;
-	} else if (dmi_check_system(dmi_platform_intel_bytcht_jdmode2)) {
+		dev_info(&i2c->dev, "quirk dev_gpio\n");
+	}
+	if (rt5670_quirk & RT5670_IN2_DIFF) {
+		rt5670->pdata.in2_diff = true;
+		dev_info(&i2c->dev, "quirk IN2_DIFF\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC_EN) {
 		rt5670->pdata.dmic_en = true;
+		dev_info(&i2c->dev, "quirk DMIC enabled\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC1_IN2P) {
 		rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P;
-		rt5670->pdata.dev_gpio = true;
+		dev_info(&i2c->dev, "quirk DMIC1 on IN2P pin\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC1_GPIO6) {
+		rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_GPIO6;
+		dev_info(&i2c->dev, "quirk DMIC1 on GPIO6 pin\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC1_GPIO7) {
+		rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_GPIO7;
+		dev_info(&i2c->dev, "quirk DMIC1 on GPIO7 pin\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC2_INR) {
+		rt5670->pdata.dmic2_data_pin = RT5670_DMIC_DATA_IN3N;
+		dev_info(&i2c->dev, "quirk DMIC2 on INR pin\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC2_GPIO8) {
+		rt5670->pdata.dmic2_data_pin = RT5670_DMIC_DATA_GPIO8;
+		dev_info(&i2c->dev, "quirk DMIC2 on GPIO8 pin\n");
+	}
+	if (rt5670_quirk & RT5670_DMIC3_GPIO5) {
+		rt5670->pdata.dmic3_data_pin = RT5670_DMIC_DATA_GPIO5;
+		dev_info(&i2c->dev, "quirk DMIC3 on GPIO5 pin\n");
+	}
+
+	if (rt5670_quirk & RT5670_JD_MODE1) {
+		rt5670->pdata.jd_mode = 1;
+		dev_info(&i2c->dev, "quirk JD mode 1\n");
+	}
+	if (rt5670_quirk & RT5670_JD_MODE2) {
 		rt5670->pdata.jd_mode = 2;
-	} else if (dmi_check_system(dmi_platform_intel_bytcht_jdmode3)) {
-		rt5670->pdata.dmic_en = true;
-		rt5670->pdata.dmic1_data_pin = RT5670_DMIC_DATA_IN2P;
-		rt5670->pdata.dev_gpio = true;
+		dev_info(&i2c->dev, "quirk JD mode 2\n");
+	}
+	if (rt5670_quirk & RT5670_JD_MODE3) {
 		rt5670->pdata.jd_mode = 3;
+		dev_info(&i2c->dev, "quirk JD mode 3\n");
 	}
 
 	rt5670->regmap = devm_regmap_init_i2c(i2c, &rt5670_regmap);