Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "The amount of changes is smaller at this round (what a surprise), but
  lots of activity is seen. Most of changes are about ASoC driver
  development, especially Intel platforms. Here are some highlights:

  General:
   - Replace all tasklet usages with other alternatives
   - Cleanup of the ASoC error unwinding code
   - Fixes for trivial issues caught by static checker
   - Spell fixes allover the places

  ALSA Core:
   - Lockdep fix for control devices
   - Fix for potential OSS sequencer mutex stalls

  HD-audio and USB-audio:
   - SoundBlaster AE-7 support
   - Changes in quirk table for the rename handling
   - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.

  ASoC:
   - Lots of updates for Intel SOF and SoundWire enablement
   - Replacement of the DSP driver for some older x86 systems; the new
     code was written from scratch, better maintenance expected
   - Helpers for parsing auxiluary devices from the device tree
   - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
     Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
     Instruments J721E, TAS2110, TAS2564 and TAS2764"

* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
  ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
  ALSA: hda: fix jack detection with Realtek codecs when in D3
  ALSA: fireworks: use semicolons rather than commas to separate statements
  ALSA: hda: use semicolons rather than commas to separate statements
  ALSA: hda/i915 - fix list corruption with concurrent probes
  ASoC: dmaengine: Document support for TX only or RX only streams
  ASoC: mchp-spdiftx: remove 'TX' from playback stream name
  ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
  ASoC: tas2764: Add the driver for the TAS2764
  dt-bindings: tas2764: Add the TAS2764 binding doc
  ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
  ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
  ASoC: stm32: dfsdm: add actual resolution trace
  ASoC: stm32: dfsdm: change rate limits
  ASoC: qcom: sc7180: Add support for audio over DP
  Asoc: qcom: lpass-platform : Increase buffer size
  ASoC: qcom: Add support for lpass hdmi driver
  Asoc: qcom: lpass:Update lpaif_dmactl members order
  Asoc:qcom:lpass-cpu:Update dts property read API
  ASoC: dt-bindings: Add dt binding for lpass hdmi
  ...

1 files changed, 90 insertions, 21 deletions

diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c
index 548f68649064..25fe2ddedd54 100644
--- a/sound/soc/codecs/rt1015.c
+++ b/sound/soc/codecs/rt1015.c
@@ -484,6 +484,33 @@ static int rt1015_bypass_boost_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static void rt1015_calibrate(struct rt1015_priv *rt1015)
+{
+	struct snd_soc_component *component = rt1015->component;
+	struct regmap *regmap = rt1015->regmap;
+
+	snd_soc_dapm_mutex_lock(&component->dapm);
+	regcache_cache_bypass(regmap, true);
+
+	regmap_write(regmap, RT1015_PWR1, 0xd7df);
+	regmap_write(regmap, RT1015_PWR4, 0x00b2);
+	regmap_write(regmap, RT1015_CLSD_INTERNAL8, 0x2008);
+	regmap_write(regmap, RT1015_CLSD_INTERNAL9, 0x0140);
+	regmap_write(regmap, RT1015_GAT_BOOST, 0x0efe);
+	regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000d);
+	regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000e);
+	regmap_write(regmap, RT1015_DC_CALIB_CLSD1, 0x5a00);
+	regmap_write(regmap, RT1015_DC_CALIB_CLSD1, 0x5a01);
+	regmap_write(regmap, RT1015_DC_CALIB_CLSD1, 0x5a05);
+	msleep(500);
+	regmap_write(regmap, RT1015_PWR1, 0x0);
+
+	regcache_cache_bypass(regmap, false);
+	regcache_mark_dirty(regmap);
+	regcache_sync(regmap);
+	snd_soc_dapm_mutex_unlock(&component->dapm);
+}
+
 static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol,
 		struct snd_ctl_elem_value *ucontrol)
 {
@@ -494,20 +521,12 @@ static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol,
 
 	if (!rt1015->dac_is_used) {
 		rt1015->bypass_boost = ucontrol->value.integer.value[0];
-		if (rt1015->bypass_boost == RT1015_Bypass_Boost) {
-			snd_soc_component_write(component,
-				RT1015_PWR4, 0x00b2);
-			snd_soc_component_write(component,
-				RT1015_CLSD_INTERNAL8, 0x2008);
-			snd_soc_component_write(component,
-				RT1015_CLSD_INTERNAL9, 0x0140);
-			snd_soc_component_write(component,
-				RT1015_GAT_BOOST, 0x0efe);
-			snd_soc_component_write(component,
-				RT1015_PWR_STATE_CTRL, 0x000d);
-			msleep(500);
-			snd_soc_component_write(component,
-				RT1015_PWR_STATE_CTRL, 0x000e);
+		if (rt1015->bypass_boost == RT1015_Bypass_Boost &&
+			!rt1015->cali_done) {
+			rt1015_calibrate(rt1015);
+			rt1015->cali_done = 1;
+
+			regmap_write(rt1015->regmap, RT1015_MONO_DYNA_CTRL, 0x0010);
 		}
 	} else
 		dev_err(component->dev, "DAC is being used!\n");
@@ -515,6 +534,32 @@ static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static void rt1015_flush_work(struct work_struct *work)
+{
+	struct rt1015_priv *rt1015 = container_of(work, struct rt1015_priv,
+						flush_work.work);
+	struct snd_soc_component *component = rt1015->component;
+	unsigned int val, i = 0, count = 20;
+
+	while (i < count) {
+		usleep_range(1000, 1500);
+		dev_dbg(component->dev, "Flush DAC (retry:%u)\n", i);
+		regmap_read(rt1015->regmap, RT1015_CLK_DET, &val);
+		if (val & 0x800)
+			break;
+		i++;
+	}
+
+	regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x0597);
+	regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x05f7);
+	regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x0028);
+
+	if (val & 0x800)
+		dev_dbg(component->dev, "Flush DAC completed.\n");
+	else
+		dev_warn(component->dev, "Fail to flush DAC data.\n");
+}
+
 static const struct snd_kcontrol_new rt1015_snd_controls[] = {
 	SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT,
 		127, 0, dac_vol_tlv),
@@ -568,12 +613,7 @@ static int r1015_dac_event(struct snd_soc_dapm_widget *w,
 		break;
 
 	case SND_SOC_DAPM_POST_PMU:
-		if (rt1015->bypass_boost == RT1015_Bypass_Boost) {
-			regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x00a8);
-			regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x0597);
-			regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x05f7);
-			regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x0028);
-		}
+		regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x00a8);
 		break;
 
 	case SND_SOC_DAPM_POST_PMD:
@@ -589,6 +629,8 @@ static int r1015_dac_event(struct snd_soc_dapm_widget *w,
 				RT1015_SYS_RST1, 0x05f5);
 		}
 		rt1015->dac_is_used = 0;
+
+		cancel_delayed_work_sync(&rt1015->flush_work);
 		break;
 
 	default:
@@ -597,6 +639,24 @@ static int r1015_dac_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		if (rt1015->hw_config == RT1015_HW_28)
+			schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10));
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("LDO2", RT1015_PWR1, RT1015_PWR_LDO2_BIT, 0,
 		NULL, 0),
@@ -630,6 +690,8 @@ static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = {
 		r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
 		SND_SOC_DAPM_POST_PMD),
 
+	SND_SOC_DAPM_OUT_DRV_E("Amp Drv", SND_SOC_NOPM, 0, 0, NULL, 0,
+			rt1015_amp_drv_event, SND_SOC_DAPM_POST_PMU),
 	SND_SOC_DAPM_OUTPUT("SPO"),
 };
 
@@ -648,7 +710,8 @@ static const struct snd_soc_dapm_route rt1015_dapm_routes[] = {
 	{ "DAC", NULL, "MIXERV" },
 	{ "DAC", NULL, "SUMV" },
 	{ "DAC", NULL, "VREFLV" },
-	{ "SPO", NULL, "DAC" },
+	{ "Amp Drv", NULL, "DAC" },
+	{ "SPO", NULL, "Amp Drv" },
 };
 
 static int rt1015_hw_params(struct snd_pcm_substream *substream,
@@ -888,8 +951,11 @@ static int rt1015_probe(struct snd_soc_component *component)
 
 	rt1015->component = component;
 	rt1015->bclk_ratio = 0;
+	rt1015->cali_done = 0;
 	snd_soc_component_write(component, RT1015_BAT_RPO_STEP1, 0x061c);
 
+	INIT_DELAYED_WORK(&rt1015->flush_work, rt1015_flush_work);
+
 	return 0;
 }
 
@@ -897,6 +963,7 @@ static void rt1015_remove(struct snd_soc_component *component)
 {
 	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
 
+	cancel_delayed_work_sync(&rt1015->flush_work);
 	regmap_write(rt1015->regmap, RT1015_RESET, 0);
 }
 
@@ -1022,6 +1089,8 @@ static int rt1015_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	rt1015->hw_config = (i2c->addr == 0x29) ? RT1015_HW_29 : RT1015_HW_28;
+
 	regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val);
 	if ((val != RT1015_DEVICE_ID_VAL) && (val != RT1015_DEVICE_ID_VAL2)) {
 		dev_err(&i2c->dev,