diff options
| author | Ondrej Zary <linux@rainbow-software.org> | 2009-06-27 16:26:35 +0200 |
|---|---|---|
| committer | Takashi Iwai <tiwai@suse.de> | 2009-06-29 08:06:57 +0200 |
| commit | 74a0094cd9d030d7a684e6ce1cbd1658eb63bd7d (patch) | |
| tree | 8a57c4baf526995554a37625c10537d41a9536f7 /sound/isa | |
| parent | c2a30d711852e4f39c8a79135b3caa701f7a8e02 (diff) | |
ALSA: cmi8330: revert comments about AD1848 back
In ALSA 1.0.20, the comments were changed to say CMI8330 instead of AD1848.
The CMI8330 chip includes two codecs - AD1848 and SB16, so the comments were
correct and are misleading now. Revert them back.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/isa')
| -rw-r--r-- | sound/isa/cmi8330.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 3ee0269e5bd0..d510c76c537f 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -35,7 +35,7 @@ * * This card has two mixers and two PCM devices. I've cheesed it such * that recording and playback can be done through the same device. - * The driver "magically" routes the capturing to the CMI8330 codec, + * The driver "magically" routes the capturing to the AD1848 codec, * and playback to the SB16 codec. This allows for full-duplex mode * to some extent. * The utilities in alsa-utils are aware of both devices, so passing @@ -345,7 +345,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n"); + snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n"); return -EBUSY; } wssport[dev] = pnp_port_start(pdev, 0); @@ -527,11 +527,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) { - snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n"); + snd_printk(KERN_ERR PFX "(AD1848) device busy??\n"); return err; } if (acard->wss->hardware != WSS_HW_CMI8330) { - snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n"); + snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n"); return -ENODEV; } |