Merge tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-02-06

this is a pull request of 47 patches for net-next/master.

The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.

Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.

The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.

Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.

The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.

* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
  can: bittiming: can_validate_bitrate(): report error via netlink
  can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
  can: bittiming: can_calc_bittiming(): clean up SJW handling
  can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
  can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
  can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
  can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
  can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
  can: bittiming: can_changelink() pass extack down callstack
  can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
  can: netlink: can_validate(): validate sample point for CAN and CAN-FD
  can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
  can: dev: register_candev(): ensure that bittiming const are valid
  can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
  can: bittiming: can_fixup_bittiming(): set effective tq
  can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
  can: bittiming(): replace open coded variants of can_bit_time()
  can: peak_usb: Reorder include directives alphabetically
  can: peak_usb: align CAN channel ID format in log with sysfs attribute
  can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
  ...
====================

Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2 files changed, 10 insertions, 0 deletions

diff --git a/net/can/gw.c b/net/can/gw.c
index 23a3d89cad81..37528826935e 100644
--- a/net/can/gw.c
+++ b/net/can/gw.c
@@ -1139,6 +1139,13 @@ static int cgw_create_job(struct sk_buff *skb,  struct nlmsghdr *nlh,
 	if (gwj->dst.dev->type != ARPHRD_CAN)
 		goto out;
 
+	/* is sending the skb back to the incoming interface intended? */
+	if (gwj->src.dev == gwj->dst.dev &&
+	    !(gwj->flags & CGW_FLAGS_CAN_IIF_TX_OK)) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	ASSERT_RTNL();
 
 	err = cgw_register_filter(net, gwj);
diff --git a/net/can/isotp.c b/net/can/isotp.c
index fc81d77724a1..9bc344851704 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1220,6 +1220,9 @@ static int isotp_bind(struct socket *sock, struct sockaddr *uaddr, int len)
 	if (len < ISOTP_MIN_NAMELEN)
 		return -EINVAL;
 
+	if (addr->can_family != AF_CAN)
+		return -EINVAL;
+
 	/* sanitize tx CAN identifier */
 	if (tx_id & CAN_EFF_FLAG)
 		tx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);