Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 267 insertions, 62 deletions

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index d8a90d397423..3dab859641e1 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1594,7 +1594,7 @@ freq_reg_info_regd(u32 center_freq,
 
 		/*
 		 * We only need to know if one frequency rule was
-		 * was in center_freq's band, that's enough, so lets
+		 * in center_freq's band, that's enough, so let's
 		 * not overwrite it once found
 		 */
 		if (!band_rule_found)
@@ -1616,10 +1616,12 @@ static const struct ieee80211_reg_rule *
 __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 {
 	const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy);
-	const struct ieee80211_reg_rule *reg_rule = NULL;
+	const u32 bws[] = {0, 1, 2, 4, 5, 8, 10, 16, 20};
+	const struct ieee80211_reg_rule *reg_rule;
+	int i = ARRAY_SIZE(bws) - 1;
 	u32 bw;
 
-	for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+	for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {
 		reg_rule = freq_reg_info_regd(center_freq, regd, bw);
 		if (!IS_ERR(reg_rule))
 			return reg_rule;
@@ -1631,7 +1633,9 @@ __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
 					       u32 center_freq)
 {
-	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
+	u32 min_bw = center_freq < MHZ_TO_KHZ(1000) ? 1 : 20;
+
+	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw));
 }
 EXPORT_SYMBOL(freq_reg_info);
 
@@ -1659,6 +1663,7 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 {
 	const struct ieee80211_freq_range *freq_range = NULL;
 	u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0;
+	bool is_s1g = chan->band == NL80211_BAND_S1GHZ;
 
 	freq_range = &reg_rule->freq_range;
 
@@ -1678,70 +1683,72 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 					MHZ_TO_KHZ(20)))
 		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags |= IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
-		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
-		bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	if (is_s1g) {
+		/* S1G is strict about non overlapping channels. We can
+		 * calculate which bandwidth is allowed per channel by finding
+		 * the largest bandwidth which cleanly divides the freq_range.
+		 */
+		int edge_offset;
+		int ch_bw = max_bandwidth_khz;
+
+		while (ch_bw) {
+			edge_offset = (center_freq_khz - ch_bw / 2) -
+				      freq_range->start_freq_khz;
+			if (edge_offset % ch_bw == 0) {
+				switch (KHZ_TO_MHZ(ch_bw)) {
+				case 1:
+					bw_flags |= IEEE80211_CHAN_1MHZ;
+					break;
+				case 2:
+					bw_flags |= IEEE80211_CHAN_2MHZ;
+					break;
+				case 4:
+					bw_flags |= IEEE80211_CHAN_4MHZ;
+					break;
+				case 8:
+					bw_flags |= IEEE80211_CHAN_8MHZ;
+					break;
+				case 16:
+					bw_flags |= IEEE80211_CHAN_16MHZ;
+					break;
+				default:
+					/* If we got here, no bandwidths fit on
+					 * this frequency, ie. band edge.
+					 */
+					bw_flags |= IEEE80211_CHAN_DISABLED;
+					break;
+				}
+				break;
+			}
+			ch_bw /= 2;
+		}
+	} else {
+		if (max_bandwidth_khz < MHZ_TO_KHZ(10))
+			bw_flags |= IEEE80211_CHAN_NO_10MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(20))
+			bw_flags |= IEEE80211_CHAN_NO_20MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(40))
+			bw_flags |= IEEE80211_CHAN_NO_HT40;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(80))
+			bw_flags |= IEEE80211_CHAN_NO_80MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(160))
+			bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	}
 	return bw_flags;
 }
 
-/*
- * Note that right now we assume the desired channel bandwidth
- * is always 20 MHz for each individual channel (HT40 uses 20 MHz
- * per channel, the primary and the extension channel).
- */
-static void handle_channel(struct wiphy *wiphy,
-			   enum nl80211_reg_initiator initiator,
-			   struct ieee80211_channel *chan)
+static void handle_channel_single_rule(struct wiphy *wiphy,
+				       enum nl80211_reg_initiator initiator,
+				       struct ieee80211_channel *chan,
+				       u32 flags,
+				       struct regulatory_request *lr,
+				       struct wiphy *request_wiphy,
+				       const struct ieee80211_reg_rule *reg_rule)
 {
-	u32 flags, bw_flags = 0;
-	const struct ieee80211_reg_rule *reg_rule = NULL;
+	u32 bw_flags = 0;
 	const struct ieee80211_power_rule *power_rule = NULL;
-	struct wiphy *request_wiphy = NULL;
-	struct regulatory_request *lr = get_last_request();
 	const struct ieee80211_regdomain *regd;
 
-	request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
-
-	flags = chan->orig_flags;
-
-	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan));
-	if (IS_ERR(reg_rule)) {
-		/*
-		 * We will disable all channels that do not match our
-		 * received regulatory rule unless the hint is coming
-		 * from a Country IE and the Country IE had no information
-		 * about a band. The IEEE 802.11 spec allows for an AP
-		 * to send only a subset of the regulatory rules allowed,
-		 * so an AP in the US that only supports 2.4 GHz may only send
-		 * a country IE with information for the 2.4 GHz band
-		 * while 5 GHz is still supported.
-		 */
-		if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
-		    PTR_ERR(reg_rule) == -ERANGE)
-			return;
-
-		if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
-		    request_wiphy && request_wiphy == wiphy &&
-		    request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
-			pr_debug("Disabling freq %d.%03d MHz for good\n",
-				 chan->center_freq, chan->freq_offset);
-			chan->orig_flags |= IEEE80211_CHAN_DISABLED;
-			chan->flags = chan->orig_flags;
-		} else {
-			pr_debug("Disabling freq %d.%03d MHz\n",
-				 chan->center_freq, chan->freq_offset);
-			chan->flags |= IEEE80211_CHAN_DISABLED;
-		}
-		return;
-	}
-
 	regd = reg_get_regdomain(wiphy);
 
 	power_rule = &reg_rule->power_rule;
@@ -1803,6 +1810,204 @@ static void handle_channel(struct wiphy *wiphy,
 		chan->max_power = chan->max_reg_power;
 }
 
+static void handle_channel_adjacent_rules(struct wiphy *wiphy,
+					  enum nl80211_reg_initiator initiator,
+					  struct ieee80211_channel *chan,
+					  u32 flags,
+					  struct regulatory_request *lr,
+					  struct wiphy *request_wiphy,
+					  const struct ieee80211_reg_rule *rrule1,
+					  const struct ieee80211_reg_rule *rrule2,
+					  struct ieee80211_freq_range *comb_range)
+{
+	u32 bw_flags1 = 0;
+	u32 bw_flags2 = 0;
+	const struct ieee80211_power_rule *power_rule1 = NULL;
+	const struct ieee80211_power_rule *power_rule2 = NULL;
+	const struct ieee80211_regdomain *regd;
+
+	regd = reg_get_regdomain(wiphy);
+
+	power_rule1 = &rrule1->power_rule;
+	power_rule2 = &rrule2->power_rule;
+	bw_flags1 = reg_rule_to_chan_bw_flags(regd, rrule1, chan);
+	bw_flags2 = reg_rule_to_chan_bw_flags(regd, rrule2, chan);
+
+	if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
+	    request_wiphy && request_wiphy == wiphy &&
+	    request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
+		/* This guarantees the driver's requested regulatory domain
+		 * will always be used as a base for further regulatory
+		 * settings
+		 */
+		chan->flags =
+			map_regdom_flags(rrule1->flags) |
+			map_regdom_flags(rrule2->flags) |
+			bw_flags1 |
+			bw_flags2;
+		chan->orig_flags = chan->flags;
+		chan->max_antenna_gain =
+			min_t(int, MBI_TO_DBI(power_rule1->max_antenna_gain),
+			      MBI_TO_DBI(power_rule2->max_antenna_gain));
+		chan->orig_mag = chan->max_antenna_gain;
+		chan->max_reg_power =
+			min_t(int, MBM_TO_DBM(power_rule1->max_eirp),
+			      MBM_TO_DBM(power_rule2->max_eirp));
+		chan->max_power = chan->max_reg_power;
+		chan->orig_mpwr = chan->max_reg_power;
+
+		if (chan->flags & IEEE80211_CHAN_RADAR) {
+			chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
+			if (rrule1->dfs_cac_ms || rrule2->dfs_cac_ms)
+				chan->dfs_cac_ms = max_t(unsigned int,
+							 rrule1->dfs_cac_ms,
+							 rrule2->dfs_cac_ms);
+		}
+
+		return;
+	}
+
+	chan->dfs_state = NL80211_DFS_USABLE;
+	chan->dfs_state_entered = jiffies;
+
+	chan->beacon_found = false;
+	chan->flags = flags | bw_flags1 | bw_flags2 |
+		      map_regdom_flags(rrule1->flags) |
+		      map_regdom_flags(rrule2->flags);
+
+	/* reg_rule_to_chan_bw_flags may forbids 10 and forbids 20 MHz
+	 * (otherwise no adj. rule case), recheck therefore
+	 */
+	if (cfg80211_does_bw_fit_range(comb_range,
+				       ieee80211_channel_to_khz(chan),
+				       MHZ_TO_KHZ(10)))
+		chan->flags &= ~IEEE80211_CHAN_NO_10MHZ;
+	if (cfg80211_does_bw_fit_range(comb_range,
+				       ieee80211_channel_to_khz(chan),
+				       MHZ_TO_KHZ(20)))
+		chan->flags &= ~IEEE80211_CHAN_NO_20MHZ;
+
+	chan->max_antenna_gain =
+		min_t(int, chan->orig_mag,
+		      min_t(int,
+			    MBI_TO_DBI(power_rule1->max_antenna_gain),
+			    MBI_TO_DBI(power_rule2->max_antenna_gain)));
+	chan->max_reg_power = min_t(int,
+				    MBM_TO_DBM(power_rule1->max_eirp),
+				    MBM_TO_DBM(power_rule2->max_eirp));
+
+	if (chan->flags & IEEE80211_CHAN_RADAR) {
+		if (rrule1->dfs_cac_ms || rrule2->dfs_cac_ms)
+			chan->dfs_cac_ms = max_t(unsigned int,
+						 rrule1->dfs_cac_ms,
+						 rrule2->dfs_cac_ms);
+		else
+			chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
+	}
+
+	if (chan->orig_mpwr) {
+		/* Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER
+		 * will always follow the passed country IE power settings.
+		 */
+		if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+		    wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER)
+			chan->max_power = chan->max_reg_power;
+		else
+			chan->max_power = min(chan->orig_mpwr,
+					      chan->max_reg_power);
+	} else {
+		chan->max_power = chan->max_reg_power;
+	}
+}
+
+/* Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
+ */
+static void handle_channel(struct wiphy *wiphy,
+			   enum nl80211_reg_initiator initiator,
+			   struct ieee80211_channel *chan)
+{
+	const u32 orig_chan_freq = ieee80211_channel_to_khz(chan);
+	struct regulatory_request *lr = get_last_request();
+	struct wiphy *request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
+	const struct ieee80211_reg_rule *rrule = NULL;
+	const struct ieee80211_reg_rule *rrule1 = NULL;
+	const struct ieee80211_reg_rule *rrule2 = NULL;
+
+	u32 flags = chan->orig_flags;
+
+	rrule = freq_reg_info(wiphy, orig_chan_freq);
+	if (IS_ERR(rrule)) {
+		/* check for adjacent match, therefore get rules for
+		 * chan - 20 MHz and chan + 20 MHz and test
+		 * if reg rules are adjacent
+		 */
+		rrule1 = freq_reg_info(wiphy,
+				       orig_chan_freq - MHZ_TO_KHZ(20));
+		rrule2 = freq_reg_info(wiphy,
+				       orig_chan_freq + MHZ_TO_KHZ(20));
+		if (!IS_ERR(rrule1) && !IS_ERR(rrule2)) {
+			struct ieee80211_freq_range comb_range;
+
+			if (rrule1->freq_range.end_freq_khz !=
+			    rrule2->freq_range.start_freq_khz)
+				goto disable_chan;
+
+			comb_range.start_freq_khz =
+				rrule1->freq_range.start_freq_khz;
+			comb_range.end_freq_khz =
+				rrule2->freq_range.end_freq_khz;
+			comb_range.max_bandwidth_khz =
+				min_t(u32,
+				      rrule1->freq_range.max_bandwidth_khz,
+				      rrule2->freq_range.max_bandwidth_khz);
+
+			if (!cfg80211_does_bw_fit_range(&comb_range,
+							orig_chan_freq,
+							MHZ_TO_KHZ(20)))
+				goto disable_chan;
+
+			handle_channel_adjacent_rules(wiphy, initiator, chan,
+						      flags, lr, request_wiphy,
+						      rrule1, rrule2,
+						      &comb_range);
+			return;
+		}
+
+disable_chan:
+		/* We will disable all channels that do not match our
+		 * received regulatory rule unless the hint is coming
+		 * from a Country IE and the Country IE had no information
+		 * about a band. The IEEE 802.11 spec allows for an AP
+		 * to send only a subset of the regulatory rules allowed,
+		 * so an AP in the US that only supports 2.4 GHz may only send
+		 * a country IE with information for the 2.4 GHz band
+		 * while 5 GHz is still supported.
+		 */
+		if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+		    PTR_ERR(rrule) == -ERANGE)
+			return;
+
+		if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
+		    request_wiphy && request_wiphy == wiphy &&
+		    request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
+			pr_debug("Disabling freq %d.%03d MHz for good\n",
+				 chan->center_freq, chan->freq_offset);
+			chan->orig_flags |= IEEE80211_CHAN_DISABLED;
+			chan->flags = chan->orig_flags;
+		} else {
+			pr_debug("Disabling freq %d.%03d MHz\n",
+				 chan->center_freq, chan->freq_offset);
+			chan->flags |= IEEE80211_CHAN_DISABLED;
+		}
+		return;
+	}
+
+	handle_channel_single_rule(wiphy, initiator, chan, flags, lr,
+				   request_wiphy, rrule);
+}
+
 static void handle_band(struct wiphy *wiphy,
 			enum nl80211_reg_initiator initiator,
 			struct ieee80211_supported_band *sband)
@@ -3170,7 +3375,7 @@ static void restore_custom_reg_settings(struct wiphy *wiphy)
  *   - send a user regulatory hint if applicable
  *
  * Device drivers that send a regulatory hint for a specific country
- * keep their own regulatory domain on wiphy->regd so that does does
+ * keep their own regulatory domain on wiphy->regd so that does
  * not need to be remembered.
  */
 static void restore_regulatory_settings(bool reset_user, bool cached)