Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

1 files changed, 29 insertions, 67 deletions

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 5b919cab1de0..f70e9cd10552 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -688,7 +688,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
 		*pos++ = csa->settings.count;
 		*pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
 		*pos++ = 6;
-		if (ifmsh->chsw_init) {
+		if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) {
 			*pos++ = ifmsh->mshcfg.dot11MeshTTL;
 			*pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
 		} else {
@@ -859,18 +859,12 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 {
 	struct cfg80211_csa_settings params;
 	struct ieee80211_csa_ie csa_ie;
-	struct ieee80211_chanctx_conf *chanctx_conf;
-	struct ieee80211_chanctx *chanctx;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
-	int err, num_chanctx;
+	int err;
 	u32 sta_flags;
 
-	if (sdata->vif.csa_active)
-		return true;
-
-	if (!ifmsh->mesh_id)
-		return false;
+	sdata_assert_lock(sdata);
 
 	sta_flags = IEEE80211_STA_DISABLE_VHT;
 	switch (sdata->vif.bss_conf.chandef.width) {
@@ -896,10 +890,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 	params.chandef = csa_ie.chandef;
 	params.count = csa_ie.count;
 
-	if (sdata->vif.bss_conf.chandef.chan->band !=
-	    params.chandef.chan->band)
-		return false;
-
 	if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, &params.chandef,
 				     IEEE80211_CHAN_DISABLED)) {
 		sdata_info(sdata,
@@ -922,24 +912,12 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 		return false;
 	}
 
-	rcu_read_lock();
-	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
-	if (!chanctx_conf)
-		goto failed_chswitch;
-
-	/* don't handle for multi-VIF cases */
-	chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
-	if (chanctx->refcount > 1)
-		goto failed_chswitch;
-
-	num_chanctx = 0;
-	list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list)
-		num_chanctx++;
-
-	if (num_chanctx > 1)
-		goto failed_chswitch;
-
-	rcu_read_unlock();
+	if (cfg80211_chandef_identical(&params.chandef,
+				       &sdata->vif.bss_conf.chandef)) {
+		mcsa_dbg(sdata,
+			 "received csa with an identical chandef, ignoring\n");
+		return true;
+	}
 
 	mcsa_dbg(sdata,
 		 "received channel switch announcement to go to channel %d MHz\n",
@@ -953,30 +931,16 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 		ifmsh->pre_value = csa_ie.pre_value;
 	}
 
-	if (ifmsh->chsw_ttl < ifmsh->mshcfg.dot11MeshTTL) {
-		if (ieee80211_mesh_csa_beacon(sdata, &params, false) < 0)
-			return false;
-	} else {
+	if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL)
 		return false;
-	}
 
-	sdata->csa_radar_required = params.radar_required;
+	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER;
 
-	if (params.block_tx)
-		ieee80211_stop_queues_by_reason(&sdata->local->hw,
-				IEEE80211_MAX_QUEUE_MAP,
-				IEEE80211_QUEUE_STOP_REASON_CSA);
-
-	sdata->csa_chandef = params.chandef;
-	sdata->vif.csa_active = true;
-
-	ieee80211_bss_info_change_notify(sdata, err);
-	drv_channel_switch_beacon(sdata, &params.chandef);
+	if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev,
+				     &params) < 0)
+		return false;
 
 	return true;
-failed_chswitch:
-	rcu_read_unlock();
-	return false;
 }
 
 static void
@@ -1086,7 +1050,8 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 		ifmsh->sync_ops->rx_bcn_presp(sdata,
 			stype, mgmt, &elems, rx_status);
 
-	if (!ifmsh->chsw_init)
+	if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
+	    !sdata->vif.csa_active)
 		ieee80211_mesh_process_chnswitch(sdata, &elems, true);
 }
 
@@ -1095,29 +1060,30 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_csa_settings *tmp_csa_settings;
 	int ret = 0;
+	int changed = 0;
 
 	/* Reset the TTL value and Initiator flag */
-	ifmsh->chsw_init = false;
+	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
 	ifmsh->chsw_ttl = 0;
 
 	/* Remove the CSA and MCSP elements from the beacon */
 	tmp_csa_settings = rcu_dereference(ifmsh->csa);
 	rcu_assign_pointer(ifmsh->csa, NULL);
-	kfree_rcu(tmp_csa_settings, rcu_head);
+	if (tmp_csa_settings)
+		kfree_rcu(tmp_csa_settings, rcu_head);
 	ret = ieee80211_mesh_rebuild_beacon(sdata);
 	if (ret)
 		return -EINVAL;
 
-	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+	changed |= BSS_CHANGED_BEACON;
 
 	mcsa_dbg(sdata, "complete switching to center freq %d MHz",
 		 sdata->vif.bss_conf.chandef.chan->center_freq);
-	return 0;
+	return changed;
 }
 
 int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
-			      struct cfg80211_csa_settings *csa_settings,
-			      bool csa_action)
+			      struct cfg80211_csa_settings *csa_settings)
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_csa_settings *tmp_csa_settings;
@@ -1141,12 +1107,7 @@ int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
 		return ret;
 	}
 
-	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
-
-	if (csa_action)
-		ieee80211_send_action_csa(sdata, csa_settings);
-
-	return 0;
+	return BSS_CHANGED_BEACON;
 }
 
 static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
@@ -1210,7 +1171,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
 
 	ifmsh->pre_value = pre_value;
 
-	if (!ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
+	if (!sdata->vif.csa_active &&
+	    !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
 		mcsa_dbg(sdata, "Failed to process CSA action frame");
 		return;
 	}
@@ -1257,7 +1219,7 @@ void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 	sdata_lock(sdata);
 
 	/* mesh already went down */
-	if (!sdata->wdev.mesh_id_len)
+	if (!sdata->u.mesh.mesh_id_len)
 		goto out;
 
 	rx_status = IEEE80211_SKB_RXCB(skb);
@@ -1310,7 +1272,7 @@ void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
 	sdata_lock(sdata);
 
 	/* mesh already went down */
-	if (!sdata->wdev.mesh_id_len)
+	if (!sdata->u.mesh.mesh_id_len)
 		goto out;
 
 	if (ifmsh->preq_queue_len &&
@@ -1365,7 +1327,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	mesh_rmc_init(sdata);
 	ifmsh->last_preq = jiffies;
 	ifmsh->next_perr = jiffies;
-	ifmsh->chsw_init = false;
+	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
 	/* Allocate all mesh structures when creating the first mesh interface. */
 	if (!mesh_allocated)
 		ieee80211s_init();