summaryrefslogtreecommitdiff
path: root/net/ipv6/icmp.c
diff options
context:
space:
mode:
authorJason A. Donenfeld <Jason@zx2c4.com>2021-02-23 14:18:58 +0100
committerJakub Kicinski <kuba@kernel.org>2021-02-23 11:29:52 -0800
commitee576c47db60432c37e54b1e2b43a8ca6d3a8dca (patch)
tree2816bf6fd51e4c4e06c7a841550287e1141ebc8b /net/ipv6/icmp.c
parent42870a1a8728ec3c35a12aaf078eaefa0f042772 (diff)
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'net/ipv6/icmp.c')
-rw-r--r--net/ipv6/icmp.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index f3d05866692e..fd1f896115c1 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -331,10 +331,9 @@ static int icmpv6_getfrag(void *from, char *to, int offset, int len, int odd, st
}
#if IS_ENABLED(CONFIG_IPV6_MIP6)
-static void mip6_addr_swap(struct sk_buff *skb)
+static void mip6_addr_swap(struct sk_buff *skb, const struct inet6_skb_parm *opt)
{
struct ipv6hdr *iph = ipv6_hdr(skb);
- struct inet6_skb_parm *opt = IP6CB(skb);
struct ipv6_destopt_hao *hao;
struct in6_addr tmp;
int off;
@@ -351,7 +350,7 @@ static void mip6_addr_swap(struct sk_buff *skb)
}
}
#else
-static inline void mip6_addr_swap(struct sk_buff *skb) {}
+static inline void mip6_addr_swap(struct sk_buff *skb, const struct inet6_skb_parm *opt) {}
#endif
static struct dst_entry *icmpv6_route_lookup(struct net *net,
@@ -446,7 +445,8 @@ static int icmp6_iif(const struct sk_buff *skb)
* Send an ICMP message in response to a packet in error
*/
void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
- const struct in6_addr *force_saddr)
+ const struct in6_addr *force_saddr,
+ const struct inet6_skb_parm *parm)
{
struct inet6_dev *idev = NULL;
struct ipv6hdr *hdr = ipv6_hdr(skb);
@@ -542,7 +542,7 @@ void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
if (!(skb->dev->flags & IFF_LOOPBACK) && !icmpv6_global_allow(net, type))
goto out_bh_enable;
- mip6_addr_swap(skb);
+ mip6_addr_swap(skb, parm);
sk = icmpv6_xmit_lock(net);
if (!sk)
@@ -559,7 +559,7 @@ void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
/* select a more meaningful saddr from input if */
struct net_device *in_netdev;
- in_netdev = dev_get_by_index(net, IP6CB(skb)->iif);
+ in_netdev = dev_get_by_index(net, parm->iif);
if (in_netdev) {
ipv6_dev_get_saddr(net, in_netdev, &fl6.daddr,
inet6_sk(sk)->srcprefs,
@@ -640,7 +640,7 @@ EXPORT_SYMBOL(icmp6_send);
*/
void icmpv6_param_prob(struct sk_buff *skb, u8 code, int pos)
{
- icmp6_send(skb, ICMPV6_PARAMPROB, code, pos, NULL);
+ icmp6_send(skb, ICMPV6_PARAMPROB, code, pos, NULL, IP6CB(skb));
kfree_skb(skb);
}
@@ -697,10 +697,10 @@ int ip6_err_gen_icmpv6_unreach(struct sk_buff *skb, int nhs, int type,
}
if (type == ICMP_TIME_EXCEEDED)
icmp6_send(skb2, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT,
- info, &temp_saddr);
+ info, &temp_saddr, IP6CB(skb2));
else
icmp6_send(skb2, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH,
- info, &temp_saddr);
+ info, &temp_saddr, IP6CB(skb2));
if (rt)
ip6_rt_put(rt);