Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

1 files changed, 68 insertions, 8 deletions

diff --git a/net/dsa/master.c b/net/dsa/master.c
index 2851e44c4cf0..40367ab41cf8 100644
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -58,7 +58,7 @@ static void dsa_master_get_regs(struct net_device *dev,
 	}
 
 	cpu_info = (struct ethtool_drvinfo *)data;
-	strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
+	strscpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
 	data += sizeof(*cpu_info);
 	cpu_regs = (struct ethtool_regs *)data;
 	data += sizeof(*cpu_regs);
@@ -226,6 +226,9 @@ static int dsa_master_ethtool_setup(struct net_device *dev)
 	struct dsa_switch *ds = cpu_dp->ds;
 	struct ethtool_ops *ops;
 
+	if (netif_is_lag_master(dev))
+		return 0;
+
 	ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
 	if (!ops)
 		return -ENOMEM;
@@ -250,6 +253,9 @@ static void dsa_master_ethtool_teardown(struct net_device *dev)
 {
 	struct dsa_port *cpu_dp = dev->dsa_ptr;
 
+	if (netif_is_lag_master(dev))
+		return;
+
 	dev->ethtool_ops = cpu_dp->orig_ethtool_ops;
 	cpu_dp->orig_ethtool_ops = NULL;
 }
@@ -257,6 +263,9 @@ static void dsa_master_ethtool_teardown(struct net_device *dev)
 static void dsa_netdev_ops_set(struct net_device *dev,
 			       const struct dsa_netdevice_ops *ops)
 {
+	if (netif_is_lag_master(dev))
+		return;
+
 	dev->dsa_ptr->netdev_ops = ops;
 }
 
@@ -307,7 +316,7 @@ static ssize_t tagging_store(struct device *d, struct device_attribute *attr,
 		 */
 		goto out;
 
-	err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, dev, new_tag_ops,
+	err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, new_tag_ops,
 					old_tag_ops);
 	if (err) {
 		/* On failure the old tagger is restored, so we don't need the
@@ -355,12 +364,14 @@ int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
 	mtu = ETH_DATA_LEN + dsa_tag_protocol_overhead(tag_ops);
 
 	/* The DSA master must use SET_NETDEV_DEV for this to work. */
-	consumer_link = device_link_add(ds->dev, dev->dev.parent,
-					DL_FLAG_AUTOREMOVE_CONSUMER);
-	if (!consumer_link)
-		netdev_err(dev,
-			   "Failed to create a device link to DSA switch %s\n",
-			   dev_name(ds->dev));
+	if (!netif_is_lag_master(dev)) {
+		consumer_link = device_link_add(ds->dev, dev->dev.parent,
+						DL_FLAG_AUTOREMOVE_CONSUMER);
+		if (!consumer_link)
+			netdev_err(dev,
+				   "Failed to create a device link to DSA switch %s\n",
+				   dev_name(ds->dev));
+	}
 
 	/* The switch driver may not implement ->port_change_mtu(), case in
 	 * which dsa_slave_change_mtu() will not update the master MTU either,
@@ -417,3 +428,52 @@ void dsa_master_teardown(struct net_device *dev)
 	 */
 	wmb();
 }
+
+int dsa_master_lag_setup(struct net_device *lag_dev, struct dsa_port *cpu_dp,
+			 struct netdev_lag_upper_info *uinfo,
+			 struct netlink_ext_ack *extack)
+{
+	bool master_setup = false;
+	int err;
+
+	if (!netdev_uses_dsa(lag_dev)) {
+		err = dsa_master_setup(lag_dev, cpu_dp);
+		if (err)
+			return err;
+
+		master_setup = true;
+	}
+
+	err = dsa_port_lag_join(cpu_dp, lag_dev, uinfo, extack);
+	if (err) {
+		if (extack && !extack->_msg)
+			NL_SET_ERR_MSG_MOD(extack,
+					   "CPU port failed to join LAG");
+		goto out_master_teardown;
+	}
+
+	return 0;
+
+out_master_teardown:
+	if (master_setup)
+		dsa_master_teardown(lag_dev);
+	return err;
+}
+
+/* Tear down a master if there isn't any other user port on it,
+ * optionally also destroying LAG information.
+ */
+void dsa_master_lag_teardown(struct net_device *lag_dev,
+			     struct dsa_port *cpu_dp)
+{
+	struct net_device *upper;
+	struct list_head *iter;
+
+	dsa_port_lag_leave(cpu_dp, lag_dev);
+
+	netdev_for_each_upper_dev_rcu(lag_dev, upper, iter)
+		if (dsa_slave_dev_check(upper))
+			return;
+
+	dsa_master_teardown(lag_dev);
+}