diff options
| author | Andy Gospodarek <andy@greyhouse.net> | 2009-12-14 10:48:58 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-01-03 21:17:16 -0800 |
| commit | 1f3c8804acba841b5573b953f5560d2683d2db0d (patch) | |
| tree | 453fae141b4a37e72ee0513ea1816fbff8f1cf8a /net/core/dev.c | |
| parent | 3a999e6eb5d277cd6a321dcda3fc43c3d9e4e4b8 (diff) | |
bonding: allow arp_ip_targets on separate vlans to use arp validation
This allows a bond device to specify an arp_ip_target as a host that is
not on the same vlan as the base bond device and still use arp
validation. A configuration like this, now works:
BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3"
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000
link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000
link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::213:21ff:febe:33e9/64 scope link
valid_lft forever preferred_lft forever
9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100
inet6 fe80::213:21ff:febe:33e9/64 scope link
valid_lft forever preferred_lft forever
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth1
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 1000
ARP IP target/s (n.n.n.n form): 10.0.100.1
Slave Interface: eth1
MII Status: up
Link Failure Count: 1
Permanent HW addr: 00:40:05:30:ff:30
Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:13:21:be:33:e9
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/core/dev.c')
| -rw-r--r-- | net/core/dev.c | 20 |
1 files changed, 17 insertions, 3 deletions
diff --git a/net/core/dev.c b/net/core/dev.c index a8d68cdedbbe..f9aa699ab6cb 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2495,12 +2495,26 @@ ncls: if (!skb) goto out; + /* + * Make sure frames received on VLAN interfaces stacked on + * bonding interfaces still make their way to any base bonding + * device that may have registered for a specific ptype. The + * handler may have to adjust skb->dev and orig_dev. + * + * null_or_orig can be overloaded since it will not be set when + * using VLANs on top of bonding. Putting it here prevents + * disturbing the ptype_all handlers above. + */ + if ((skb->dev->priv_flags & IFF_802_1Q_VLAN) && + (vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING)) { + null_or_orig = vlan_dev_real_dev(skb->dev); + } + type = skb->protocol; list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { - if (ptype->type == type && - (ptype->dev == null_or_orig || ptype->dev == skb->dev || - ptype->dev == orig_dev)) { + if (ptype->type == type && (ptype->dev == null_or_orig || + ptype->dev == skb->dev || ptype->dev == orig_dev)) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; |