Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This contains a pair of commits that fix 282d8998e997 ("srcu: Prevent
  expedited GPs and blocking readers from consuming CPU"), which was
  itself a fix to an SRCU expedited grace-period problem that could
  prevent kernel live patching (KLP) from completing.

  That SRCU fix for KLP introduced large (as in minutes) boot-time
  delays to embedded Linux kernels running on qemu/KVM. These delays
  were due to the emulation of certain MMIO operations controlling
  memory layout, which were emulated with one expedited grace period per
  access. Common configurations required thousands of boot-time MMIO
  accesses, and thus thousands of boot-time expedited SRCU grace
  periods.

  In these configurations, the occasional sleeps that allowed KLP to
  proceed caused excessive boot delays. These commits preserve enough
  sleeps to permit KLP to proceed, but few enough that the virtual
  embedded kernels still boot reasonably quickly.

  This represents a regression introduced in the v5.19 merge window, and
  the bug is causing significant inconvenience"

* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  srcu: Make expedited RCU grace periods block even less frequently
  srcu: Block less aggressively for expedited grace periods

1 files changed, 74 insertions, 24 deletions

diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 50ba70f019de..1c304fec89c0 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -511,10 +511,52 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
 	return sum;
 }
 
-#define SRCU_INTERVAL		1	// Base delay if no expedited GPs pending.
-#define SRCU_MAX_INTERVAL	10	// Maximum incremental delay from slow readers.
-#define SRCU_MAX_NODELAY_PHASE	1	// Maximum per-GP-phase consecutive no-delay instances.
-#define SRCU_MAX_NODELAY	100	// Maximum consecutive no-delay instances.
+/*
+ * We use an adaptive strategy for synchronize_srcu() and especially for
+ * synchronize_srcu_expedited().  We spin for a fixed time period
+ * (defined below, boot time configurable) to allow SRCU readers to exit
+ * their read-side critical sections.  If there are still some readers
+ * after one jiffy, we repeatedly block for one jiffy time periods.
+ * The blocking time is increased as the grace-period age increases,
+ * with max blocking time capped at 10 jiffies.
+ */
+#define SRCU_DEFAULT_RETRY_CHECK_DELAY		5
+
+static ulong srcu_retry_check_delay = SRCU_DEFAULT_RETRY_CHECK_DELAY;
+module_param(srcu_retry_check_delay, ulong, 0444);
+
+#define SRCU_INTERVAL		1		// Base delay if no expedited GPs pending.
+#define SRCU_MAX_INTERVAL	10		// Maximum incremental delay from slow readers.
+
+#define SRCU_DEFAULT_MAX_NODELAY_PHASE_LO	3UL	// Lowmark on default per-GP-phase
+							// no-delay instances.
+#define SRCU_DEFAULT_MAX_NODELAY_PHASE_HI	1000UL	// Highmark on default per-GP-phase
+							// no-delay instances.
+
+#define SRCU_UL_CLAMP_LO(val, low)	((val) > (low) ? (val) : (low))
+#define SRCU_UL_CLAMP_HI(val, high)	((val) < (high) ? (val) : (high))
+#define SRCU_UL_CLAMP(val, low, high)	SRCU_UL_CLAMP_HI(SRCU_UL_CLAMP_LO((val), (low)), (high))
+// per-GP-phase no-delay instances adjusted to allow non-sleeping poll upto
+// one jiffies time duration. Mult by 2 is done to factor in the srcu_get_delay()
+// called from process_srcu().
+#define SRCU_DEFAULT_MAX_NODELAY_PHASE_ADJUSTED	\
+	(2UL * USEC_PER_SEC / HZ / SRCU_DEFAULT_RETRY_CHECK_DELAY)
+
+// Maximum per-GP-phase consecutive no-delay instances.
+#define SRCU_DEFAULT_MAX_NODELAY_PHASE	\
+	SRCU_UL_CLAMP(SRCU_DEFAULT_MAX_NODELAY_PHASE_ADJUSTED,	\
+		      SRCU_DEFAULT_MAX_NODELAY_PHASE_LO,	\
+		      SRCU_DEFAULT_MAX_NODELAY_PHASE_HI)
+
+static ulong srcu_max_nodelay_phase = SRCU_DEFAULT_MAX_NODELAY_PHASE;
+module_param(srcu_max_nodelay_phase, ulong, 0444);
+
+// Maximum consecutive no-delay instances.
+#define SRCU_DEFAULT_MAX_NODELAY	(SRCU_DEFAULT_MAX_NODELAY_PHASE > 100 ?	\
+					 SRCU_DEFAULT_MAX_NODELAY_PHASE : 100)
+
+static ulong srcu_max_nodelay = SRCU_DEFAULT_MAX_NODELAY;
+module_param(srcu_max_nodelay, ulong, 0444);
 
 /*
  * Return grace-period delay, zero if there are expedited grace
@@ -522,16 +564,22 @@ static bool srcu_readers_active(struct srcu_struct *ssp)
  */
 static unsigned long srcu_get_delay(struct srcu_struct *ssp)
 {
+	unsigned long gpstart;
+	unsigned long j;
 	unsigned long jbase = SRCU_INTERVAL;
 
 	if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
 		jbase = 0;
-	if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)))
-		jbase += jiffies - READ_ONCE(ssp->srcu_gp_start);
-	if (!jbase) {
-		WRITE_ONCE(ssp->srcu_n_exp_nodelay, READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
-		if (READ_ONCE(ssp->srcu_n_exp_nodelay) > SRCU_MAX_NODELAY_PHASE)
-			jbase = 1;
+	if (rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq))) {
+		j = jiffies - 1;
+		gpstart = READ_ONCE(ssp->srcu_gp_start);
+		if (time_after(j, gpstart))
+			jbase += j - gpstart;
+		if (!jbase) {
+			WRITE_ONCE(ssp->srcu_n_exp_nodelay, READ_ONCE(ssp->srcu_n_exp_nodelay) + 1);
+			if (READ_ONCE(ssp->srcu_n_exp_nodelay) > srcu_max_nodelay_phase)
+				jbase = 1;
+		}
 	}
 	return jbase > SRCU_MAX_INTERVAL ? SRCU_MAX_INTERVAL : jbase;
 }
@@ -607,15 +655,6 @@ void __srcu_read_unlock(struct srcu_struct *ssp, int idx)
 EXPORT_SYMBOL_GPL(__srcu_read_unlock);
 
 /*
- * We use an adaptive strategy for synchronize_srcu() and especially for
- * synchronize_srcu_expedited().  We spin for a fixed time period
- * (defined below) to allow SRCU readers to exit their read-side critical
- * sections.  If there are still some readers after a few microseconds,
- * we repeatedly block for 1-millisecond time periods.
- */
-#define SRCU_RETRY_CHECK_DELAY		5
-
-/*
  * Start an SRCU grace period.
  */
 static void srcu_gp_start(struct srcu_struct *ssp)
@@ -700,7 +739,7 @@ static void srcu_schedule_cbs_snp(struct srcu_struct *ssp, struct srcu_node *snp
  */
 static void srcu_gp_end(struct srcu_struct *ssp)
 {
-	unsigned long cbdelay;
+	unsigned long cbdelay = 1;
 	bool cbs;
 	bool last_lvl;
 	int cpu;
@@ -720,7 +759,9 @@ static void srcu_gp_end(struct srcu_struct *ssp)
 	spin_lock_irq_rcu_node(ssp);
 	idx = rcu_seq_state(ssp->srcu_gp_seq);
 	WARN_ON_ONCE(idx != SRCU_STATE_SCAN2);
-	cbdelay = !!srcu_get_delay(ssp);
+	if (ULONG_CMP_LT(READ_ONCE(ssp->srcu_gp_seq), READ_ONCE(ssp->srcu_gp_seq_needed_exp)))
+		cbdelay = 0;
+
 	WRITE_ONCE(ssp->srcu_last_gp_end, ktime_get_mono_fast_ns());
 	rcu_seq_end(&ssp->srcu_gp_seq);
 	gpseq = rcu_seq_current(&ssp->srcu_gp_seq);
@@ -921,12 +962,16 @@ static void srcu_funnel_gp_start(struct srcu_struct *ssp, struct srcu_data *sdp,
  */
 static bool try_check_zero(struct srcu_struct *ssp, int idx, int trycount)
 {
+	unsigned long curdelay;
+
+	curdelay = !srcu_get_delay(ssp);
+
 	for (;;) {
 		if (srcu_readers_active_idx_check(ssp, idx))
 			return true;
-		if (--trycount + !srcu_get_delay(ssp) <= 0)
+		if ((--trycount + curdelay) <= 0)
 			return false;
-		udelay(SRCU_RETRY_CHECK_DELAY);
+		udelay(srcu_retry_check_delay);
 	}
 }
 
@@ -1582,7 +1627,7 @@ static void process_srcu(struct work_struct *work)
 		j = jiffies;
 		if (READ_ONCE(ssp->reschedule_jiffies) == j) {
 			WRITE_ONCE(ssp->reschedule_count, READ_ONCE(ssp->reschedule_count) + 1);
-			if (READ_ONCE(ssp->reschedule_count) > SRCU_MAX_NODELAY)
+			if (READ_ONCE(ssp->reschedule_count) > srcu_max_nodelay)
 				curdelay = 1;
 		} else {
 			WRITE_ONCE(ssp->reschedule_count, 1);
@@ -1674,6 +1719,11 @@ static int __init srcu_bootup_announce(void)
 	pr_info("Hierarchical SRCU implementation.\n");
 	if (exp_holdoff != DEFAULT_SRCU_EXP_HOLDOFF)
 		pr_info("\tNon-default auto-expedite holdoff of %lu ns.\n", exp_holdoff);
+	if (srcu_retry_check_delay != SRCU_DEFAULT_RETRY_CHECK_DELAY)
+		pr_info("\tNon-default retry check delay of %lu us.\n", srcu_retry_check_delay);
+	if (srcu_max_nodelay != SRCU_DEFAULT_MAX_NODELAY)
+		pr_info("\tNon-default max no-delay of %lu.\n", srcu_max_nodelay);
+	pr_info("\tMax phase no-delay instances is %lu.\n", srcu_max_nodelay_phase);
 	return 0;
 }
 early_initcall(srcu_bootup_announce);