Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

5 files changed, 73 insertions, 136 deletions

diff --git a/init/calibrate.c b/init/calibrate.c
index 24fe022c55f9..76ac9194cbc4 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -110,8 +110,8 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;}
 
 /*
  * This is the number of bits of precision for the loops_per_jiffy.  Each
- * bit takes on average 1.5/HZ seconds.  This (like the original) is a little
- * better than 1%
+ * time we refine our estimate after the first takes 1.5/HZ seconds, so try
+ * to start with a good estimate.
  * For the boot cpu we can skip the delay calibration and assign it a value
  * calculated based on the timer frequency.
  * For the rest of the CPUs we cannot assume that the timer frequency is same as
@@ -119,10 +119,72 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;}
  */
 #define LPS_PREC 8
 
+static unsigned long __cpuinit calibrate_delay_converge(void)
+{
+	/* First stage - slowly accelerate to find initial bounds */
+	unsigned long lpj, lpj_base, ticks, loopadd, loopadd_base, chop_limit;
+	int trials = 0, band = 0, trial_in_band = 0;
+
+	lpj = (1<<12);
+
+	/* wait for "start of" clock tick */
+	ticks = jiffies;
+	while (ticks == jiffies)
+		; /* nothing */
+	/* Go .. */
+	ticks = jiffies;
+	do {
+		if (++trial_in_band == (1<<band)) {
+			++band;
+			trial_in_band = 0;
+		}
+		__delay(lpj * band);
+		trials += band;
+	} while (ticks == jiffies);
+	/*
+	 * We overshot, so retreat to a clear underestimate. Then estimate
+	 * the largest likely undershoot. This defines our chop bounds.
+	 */
+	trials -= band;
+	loopadd_base = lpj * band;
+	lpj_base = lpj * trials;
+
+recalibrate:
+	lpj = lpj_base;
+	loopadd = loopadd_base;
+
+	/*
+	 * Do a binary approximation to get lpj set to
+	 * equal one clock (up to LPS_PREC bits)
+	 */
+	chop_limit = lpj >> LPS_PREC;
+	while (loopadd > chop_limit) {
+		lpj += loopadd;
+		ticks = jiffies;
+		while (ticks == jiffies)
+			; /* nothing */
+		ticks = jiffies;
+		__delay(lpj);
+		if (jiffies != ticks)	/* longer than 1 tick */
+			lpj -= loopadd;
+		loopadd >>= 1;
+	}
+	/*
+	 * If we incremented every single time possible, presume we've
+	 * massively underestimated initially, and retry with a higher
+	 * start, and larger range. (Only seen on x86_64, due to SMIs)
+	 */
+	if (lpj + loopadd * 2 == lpj_base + loopadd_base * 2) {
+		lpj_base = lpj;
+		loopadd_base <<= 2;
+		goto recalibrate;
+	}
+
+	return lpj;
+}
+
 void __cpuinit calibrate_delay(void)
 {
-	unsigned long ticks, loopbit;
-	int lps_precision = LPS_PREC;
 	static bool printed;
 
 	if (preset_lpj) {
@@ -139,39 +201,9 @@ void __cpuinit calibrate_delay(void)
 			pr_info("Calibrating delay using timer "
 				"specific routine.. ");
 	} else {
-		loops_per_jiffy = (1<<12);
-
 		if (!printed)
 			pr_info("Calibrating delay loop... ");
-		while ((loops_per_jiffy <<= 1) != 0) {
-			/* wait for "start of" clock tick */
-			ticks = jiffies;
-			while (ticks == jiffies)
-				/* nothing */;
-			/* Go .. */
-			ticks = jiffies;
-			__delay(loops_per_jiffy);
-			ticks = jiffies - ticks;
-			if (ticks)
-				break;
-		}
-
-		/*
-		 * Do a binary approximation to get loops_per_jiffy set to
-		 * equal one clock (up to lps_precision bits)
-		 */
-		loops_per_jiffy >>= 1;
-		loopbit = loops_per_jiffy;
-		while (lps_precision-- && (loopbit >>= 1)) {
-			loops_per_jiffy |= loopbit;
-			ticks = jiffies;
-			while (ticks == jiffies)
-				/* nothing */;
-			ticks = jiffies;
-			__delay(loops_per_jiffy);
-			if (jiffies != ticks)	/* longer than 1 tick */
-				loops_per_jiffy &= ~loopbit;
-		}
+		loops_per_jiffy = calibrate_delay_converge();
 	}
 	if (!printed)
 		pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 2b54bef33b55..c0851a8e030c 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -186,7 +186,7 @@ dev_t name_to_dev_t(char *name)
 		goto done;
 
 	/*
-	 * try non-existant, but valid partition, which may only exist
+	 * try non-existent, but valid partition, which may only exist
 	 * after revalidating the disk, like partitioned md devices
 	 */
 	while (p > s && isdigit(p[-1]))
@@ -293,7 +293,8 @@ static int __init do_mount_root(char *name, char *fs, int flags, void *data)
 
 	sys_chdir((const char __user __force *)"/root");
 	ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev;
-	printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n",
+	printk(KERN_INFO
+	       "VFS: Mounted root (%s filesystem)%s on device %u:%u.\n",
 	       current->fs->pwd.mnt->mnt_sb->s_type->name,
 	       current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ?
 	       " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV));
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 6e1ee6987c78..fe9acb0ae480 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -64,7 +64,7 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf)
-		return -1;
+		return -ENOMEM;
 
 	minixsb = (struct minix_super_block *) buf;
 	ext2sb = (struct ext2_super_block *) buf;
diff --git a/init/main.c b/init/main.c
index 33c37c379e96..4a9479ef4540 100644
--- a/init/main.c
+++ b/init/main.c
@@ -129,63 +129,6 @@ static char *static_command_line;
 static char *execute_command;
 static char *ramdisk_execute_command;
 
-#ifdef CONFIG_SMP
-/* Setup configured maximum number of CPUs to activate */
-unsigned int setup_max_cpus = NR_CPUS;
-EXPORT_SYMBOL(setup_max_cpus);
-
-
-/*
- * Setup routine for controlling SMP activation
- *
- * Command-line option of "nosmp" or "maxcpus=0" will disable SMP
- * activation entirely (the MPS table probe still happens, though).
- *
- * Command-line option of "maxcpus=<NUM>", where <NUM> is an integer
- * greater than 0, limits the maximum number of CPUs activated in
- * SMP mode to <NUM>.
- */
-
-void __weak arch_disable_smp_support(void) { }
-
-static int __init nosmp(char *str)
-{
-	setup_max_cpus = 0;
-	arch_disable_smp_support();
-
-	return 0;
-}
-
-early_param("nosmp", nosmp);
-
-/* this is hard limit */
-static int __init nrcpus(char *str)
-{
-	int nr_cpus;
-
-	get_option(&str, &nr_cpus);
-	if (nr_cpus > 0 && nr_cpus < nr_cpu_ids)
-		nr_cpu_ids = nr_cpus;
-
-	return 0;
-}
-
-early_param("nr_cpus", nrcpus);
-
-static int __init maxcpus(char *str)
-{
-	get_option(&str, &setup_max_cpus);
-	if (setup_max_cpus == 0)
-		arch_disable_smp_support();
-
-	return 0;
-}
-
-early_param("maxcpus", maxcpus);
-#else
-static const unsigned int setup_max_cpus = NR_CPUS;
-#endif
-
 /*
  * If set, this is an indication to the drivers that reset the underlying
  * device before going ahead with the initialization otherwise driver might
@@ -362,7 +305,7 @@ static int __init rdinit_setup(char *str)
 __setup("rdinit=", rdinit_setup);
 
 #ifndef CONFIG_SMP
-
+static const unsigned int setup_max_cpus = NR_CPUS;
 #ifdef CONFIG_X86_LOCAL_APIC
 static void __init smp_init(void)
 {
@@ -374,37 +317,6 @@ static void __init smp_init(void)
 
 static inline void setup_nr_cpu_ids(void) { }
 static inline void smp_prepare_cpus(unsigned int maxcpus) { }
-
-#else
-
-/* Setup number of possible processor ids */
-int nr_cpu_ids __read_mostly = NR_CPUS;
-EXPORT_SYMBOL(nr_cpu_ids);
-
-/* An arch may set nr_cpu_ids earlier if needed, so this would be redundant */
-static void __init setup_nr_cpu_ids(void)
-{
-	nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1;
-}
-
-/* Called by boot processor to activate the rest. */
-static void __init smp_init(void)
-{
-	unsigned int cpu;
-
-	/* FIXME: This should be done in userspace --RR */
-	for_each_present_cpu(cpu) {
-		if (num_online_cpus() >= setup_max_cpus)
-			break;
-		if (!cpu_online(cpu))
-			cpu_up(cpu);
-	}
-
-	/* Any cleanup work */
-	printk(KERN_INFO "Brought up %ld CPUs\n", (long)num_online_cpus());
-	smp_cpus_done(setup_max_cpus);
-}
-
 #endif
 
 /*
@@ -875,15 +787,6 @@ static int __init kernel_init(void * unused)
 	 * init can run on any cpu.
 	 */
 	set_cpus_allowed_ptr(current, cpu_all_mask);
-	/*
-	 * Tell the world that we're going to be the grim
-	 * reaper of innocent orphaned children.
-	 *
-	 * We don't want people to have to make incorrect
-	 * assumptions about where in the task array this
-	 * can be found.
-	 */
-	init_pid_ns.child_reaper = current;
 
 	cad_pid = task_pid(current);
 
diff --git a/init/version.c b/init/version.c
index adff586401a5..86fe0ccb997a 100644
--- a/init/version.c
+++ b/init/version.c
@@ -33,6 +33,7 @@ struct uts_namespace init_uts_ns = {
 		.machine	= UTS_MACHINE,
 		.domainname	= UTS_DOMAINNAME,
 	},
+	.user_ns = &init_user_ns,
 };
 EXPORT_SYMBOL_GPL(init_uts_ns);