Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

3 files changed, 263 insertions, 0 deletions

diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 000000000000..cf35a577e371
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 67a5fa7830c4..20fa8d8ae313 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -15,6 +15,11 @@
 	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif
 
+#ifndef SET_PERSONALITY2
+#define SET_PERSONALITY2(ex, state) \
+	SET_PERSONALITY(ex)
+#endif
+
 #if ELF_CLASS == ELFCLASS32
 
 extern Elf32_Dyn _DYNAMIC [];
diff --git a/include/linux/irqchip/mips-gic.h b/include/linux/irqchip/mips-gic.h
new file mode 100644
index 000000000000..420f77b34d02
--- /dev/null
+++ b/include/linux/irqchip/mips-gic.h
@@ -0,0 +1,249 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ */
+#ifndef __LINUX_IRQCHIP_MIPS_GIC_H
+#define __LINUX_IRQCHIP_MIPS_GIC_H
+
+#include <linux/clocksource.h>
+
+#define GIC_MAX_INTRS			256
+
+/* Constants */
+#define GIC_POL_POS			1
+#define GIC_POL_NEG			0
+#define GIC_TRIG_EDGE			1
+#define GIC_TRIG_LEVEL			0
+#define GIC_TRIG_DUAL_ENABLE		1
+#define GIC_TRIG_DUAL_DISABLE		0
+
+#define MSK(n) ((1 << (n)) - 1)
+
+/* Accessors */
+#define GIC_REG(segment, offset) (segment##_##SECTION_OFS + offset##_##OFS)
+
+/* GIC Address Space */
+#define SHARED_SECTION_OFS		0x0000
+#define SHARED_SECTION_SIZE		0x8000
+#define VPE_LOCAL_SECTION_OFS		0x8000
+#define VPE_LOCAL_SECTION_SIZE		0x4000
+#define VPE_OTHER_SECTION_OFS		0xc000
+#define VPE_OTHER_SECTION_SIZE		0x4000
+#define USM_VISIBLE_SECTION_OFS		0x10000
+#define USM_VISIBLE_SECTION_SIZE	0x10000
+
+/* Register Map for Shared Section */
+
+#define GIC_SH_CONFIG_OFS		0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS	0x0010
+#define GIC_SH_COUNTER_63_32_OFS	0x0014
+#define GIC_SH_REVISIONID_OFS		0x0020
+
+/* Convert an interrupt number to a byte offset/bit for multi-word registers */
+#define GIC_INTR_OFS(intr)		(((intr) / 32) * 4)
+#define GIC_INTR_BIT(intr)		((intr) % 32)
+
+/* Polarity : Reset Value is always 0 */
+#define GIC_SH_SET_POLARITY_OFS		0x0100
+
+/* Triggering : Reset Value is always 0 */
+#define GIC_SH_SET_TRIGGER_OFS		0x0180
+
+/* Dual edge triggering : Reset Value is always 0 */
+#define GIC_SH_SET_DUAL_OFS		0x0200
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS		0x0280
+
+/* Mask manipulation */
+#define GIC_SH_RMASK_OFS		0x0300
+#define GIC_SH_SMASK_OFS		0x0380
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_OFS			0x0400
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_OFS			0x0480
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
+#define GIC_SH_MAP_TO_PIN(intr)		(4 * (intr))
+
+/* Maps Interrupt X to a VPE */
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+	((32 * (intr)) + (((vpe) / 32) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe)	(1 << ((vpe) % 32))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS			0x0000
+#define GIC_VPE_PEND_OFS		0x0004
+#define GIC_VPE_MASK_OFS		0x0008
+#define GIC_VPE_RMASK_OFS		0x000c
+#define GIC_VPE_SMASK_OFS		0x0010
+#define GIC_VPE_WD_MAP_OFS		0x0040
+#define GIC_VPE_COMPARE_MAP_OFS		0x0044
+#define GIC_VPE_TIMER_MAP_OFS		0x0048
+#define GIC_VPE_FDC_MAP_OFS		0x004c
+#define GIC_VPE_PERFCTR_MAP_OFS		0x0050
+#define GIC_VPE_SWINT0_MAP_OFS		0x0054
+#define GIC_VPE_SWINT1_MAP_OFS		0x0058
+#define GIC_VPE_OTHER_ADDR_OFS		0x0080
+#define GIC_VPE_WD_CONFIG0_OFS		0x0090
+#define GIC_VPE_WD_COUNT0_OFS		0x0094
+#define GIC_VPE_WD_INITIAL0_OFS		0x0098
+#define GIC_VPE_COMPARE_LO_OFS		0x00a0
+#define GIC_VPE_COMPARE_HI_OFS		0x00a4
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE_OFS	0x0100
+#define GIC_VPE_EIC_SS(intr)		(4 * (intr))
+
+#define GIC_VPE_EIC_VEC_BASE_OFS	0x0800
+#define GIC_VPE_EIC_VEC(intr)		(4 * (intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS		0x1000
+#define GIC_VPE_TENABLE_YQ_OFS		0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS	0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS	0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS	0x0000
+#define GIC_UMV_SH_COUNTER_63_32_OFS	0x0004
+
+/* Masks */
+#define GIC_SH_CONFIG_COUNTSTOP_SHF	28
+#define GIC_SH_CONFIG_COUNTSTOP_MSK	(MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
+
+#define GIC_SH_CONFIG_COUNTBITS_SHF	24
+#define GIC_SH_CONFIG_COUNTBITS_MSK	(MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
+
+#define GIC_SH_CONFIG_NUMINTRS_SHF	16
+#define GIC_SH_CONFIG_NUMINTRS_MSK	(MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
+
+#define GIC_SH_CONFIG_NUMVPES_SHF	0
+#define GIC_SH_CONFIG_NUMVPES_MSK	(MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
+
+#define GIC_SH_WEDGE_SET(intr)		((intr) | (0x1 << 31))
+#define GIC_SH_WEDGE_CLR(intr)		((intr) & ~(0x1 << 31))
+
+#define GIC_MAP_TO_PIN_SHF		31
+#define GIC_MAP_TO_PIN_MSK		(MSK(1) << GIC_MAP_TO_PIN_SHF)
+#define GIC_MAP_TO_NMI_SHF		30
+#define GIC_MAP_TO_NMI_MSK		(MSK(1) << GIC_MAP_TO_NMI_SHF)
+#define GIC_MAP_TO_YQ_SHF		29
+#define GIC_MAP_TO_YQ_MSK		(MSK(1) << GIC_MAP_TO_YQ_SHF)
+#define GIC_MAP_SHF			0
+#define GIC_MAP_MSK			(MSK(6) << GIC_MAP_SHF)
+
+/* GIC_VPE_CTL Masks */
+#define GIC_VPE_CTL_FDC_RTBL_SHF	4
+#define GIC_VPE_CTL_FDC_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_FDC_RTBL_SHF)
+#define GIC_VPE_CTL_SWINT_RTBL_SHF	3
+#define GIC_VPE_CTL_SWINT_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_SWINT_RTBL_SHF)
+#define GIC_VPE_CTL_PERFCNT_RTBL_SHF	2
+#define GIC_VPE_CTL_PERFCNT_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
+#define GIC_VPE_CTL_TIMER_RTBL_SHF	1
+#define GIC_VPE_CTL_TIMER_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF)
+#define GIC_VPE_CTL_EIC_MODE_SHF	0
+#define GIC_VPE_CTL_EIC_MODE_MSK	(MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF)
+
+/* GIC_VPE_PEND Masks */
+#define GIC_VPE_PEND_WD_SHF		0
+#define GIC_VPE_PEND_WD_MSK		(MSK(1) << GIC_VPE_PEND_WD_SHF)
+#define GIC_VPE_PEND_CMP_SHF		1
+#define GIC_VPE_PEND_CMP_MSK		(MSK(1) << GIC_VPE_PEND_CMP_SHF)
+#define GIC_VPE_PEND_TIMER_SHF		2
+#define GIC_VPE_PEND_TIMER_MSK		(MSK(1) << GIC_VPE_PEND_TIMER_SHF)
+#define GIC_VPE_PEND_PERFCOUNT_SHF	3
+#define GIC_VPE_PEND_PERFCOUNT_MSK	(MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF)
+#define GIC_VPE_PEND_SWINT0_SHF		4
+#define GIC_VPE_PEND_SWINT0_MSK		(MSK(1) << GIC_VPE_PEND_SWINT0_SHF)
+#define GIC_VPE_PEND_SWINT1_SHF		5
+#define GIC_VPE_PEND_SWINT1_MSK		(MSK(1) << GIC_VPE_PEND_SWINT1_SHF)
+
+/* GIC_VPE_RMASK Masks */
+#define GIC_VPE_RMASK_WD_SHF		0
+#define GIC_VPE_RMASK_WD_MSK		(MSK(1) << GIC_VPE_RMASK_WD_SHF)
+#define GIC_VPE_RMASK_CMP_SHF		1
+#define GIC_VPE_RMASK_CMP_MSK		(MSK(1) << GIC_VPE_RMASK_CMP_SHF)
+#define GIC_VPE_RMASK_TIMER_SHF		2
+#define GIC_VPE_RMASK_TIMER_MSK		(MSK(1) << GIC_VPE_RMASK_TIMER_SHF)
+#define GIC_VPE_RMASK_PERFCNT_SHF	3
+#define GIC_VPE_RMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF)
+#define GIC_VPE_RMASK_SWINT0_SHF	4
+#define GIC_VPE_RMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT0_SHF)
+#define GIC_VPE_RMASK_SWINT1_SHF	5
+#define GIC_VPE_RMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT1_SHF)
+
+/* GIC_VPE_SMASK Masks */
+#define GIC_VPE_SMASK_WD_SHF		0
+#define GIC_VPE_SMASK_WD_MSK		(MSK(1) << GIC_VPE_SMASK_WD_SHF)
+#define GIC_VPE_SMASK_CMP_SHF		1
+#define GIC_VPE_SMASK_CMP_MSK		(MSK(1) << GIC_VPE_SMASK_CMP_SHF)
+#define GIC_VPE_SMASK_TIMER_SHF		2
+#define GIC_VPE_SMASK_TIMER_MSK		(MSK(1) << GIC_VPE_SMASK_TIMER_SHF)
+#define GIC_VPE_SMASK_PERFCNT_SHF	3
+#define GIC_VPE_SMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF)
+#define GIC_VPE_SMASK_SWINT0_SHF	4
+#define GIC_VPE_SMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT0_SHF)
+#define GIC_VPE_SMASK_SWINT1_SHF	5
+#define GIC_VPE_SMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
+
+/* GIC nomenclature for Core Interrupt Pins. */
+#define GIC_CPU_INT0		0 /* Core Interrupt 2 */
+#define GIC_CPU_INT1		1 /* .		      */
+#define GIC_CPU_INT2		2 /* .		      */
+#define GIC_CPU_INT3		3 /* .		      */
+#define GIC_CPU_INT4		4 /* .		      */
+#define GIC_CPU_INT5		5 /* Core Interrupt 7 */
+
+/* Add 2 to convert GIC CPU pin to core interrupt */
+#define GIC_CPU_PIN_OFFSET	2
+
+/* Add 2 to convert non-EIC hardware interrupt to EIC vector number. */
+#define GIC_CPU_TO_VEC_OFFSET	2
+
+/* Mapped interrupt to pin X, then GIC will generate the vector (X+1). */
+#define GIC_PIN_TO_VEC_OFFSET	1
+
+/* Local GIC interrupts. */
+#define GIC_LOCAL_INT_WD	0 /* GIC watchdog */
+#define GIC_LOCAL_INT_COMPARE	1 /* GIC count and compare timer */
+#define GIC_LOCAL_INT_TIMER	2 /* CPU timer interrupt */
+#define GIC_LOCAL_INT_PERFCTR	3 /* CPU performance counter */
+#define GIC_LOCAL_INT_SWINT0	4 /* CPU software interrupt 0 */
+#define GIC_LOCAL_INT_SWINT1	5 /* CPU software interrupt 1 */
+#define GIC_LOCAL_INT_FDC	6 /* CPU fast debug channel */
+#define GIC_NUM_LOCAL_INTRS	7
+
+/* Convert between local/shared IRQ number and GIC HW IRQ number. */
+#define GIC_LOCAL_HWIRQ_BASE	0
+#define GIC_LOCAL_TO_HWIRQ(x)	(GIC_LOCAL_HWIRQ_BASE + (x))
+#define GIC_HWIRQ_TO_LOCAL(x)	((x) - GIC_LOCAL_HWIRQ_BASE)
+#define GIC_SHARED_HWIRQ_BASE	GIC_NUM_LOCAL_INTRS
+#define GIC_SHARED_TO_HWIRQ(x)	(GIC_SHARED_HWIRQ_BASE + (x))
+#define GIC_HWIRQ_TO_SHARED(x)	((x) - GIC_SHARED_HWIRQ_BASE)
+
+extern unsigned int gic_present;
+
+extern void gic_init(unsigned long gic_base_addr,
+	unsigned long gic_addrspace_size, unsigned int cpu_vec,
+	unsigned int irqbase);
+extern void gic_clocksource_init(unsigned int);
+extern cycle_t gic_read_count(void);
+extern unsigned int gic_get_count_width(void);
+extern cycle_t gic_read_compare(void);
+extern void gic_write_compare(cycle_t cnt);
+extern void gic_write_cpu_compare(cycle_t cnt, int cpu);
+extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern unsigned int gic_get_timer_pending(void);
+extern int gic_get_c0_compare_int(void);
+extern int gic_get_c0_perfcount_int(void);
+#endif /* __LINUX_IRQCHIP_MIPS_GIC_H */