diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-09 15:40:28 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-09 15:40:28 -0700 |
commit | 4879b7ae05431ebcd228a4ff25a81120b3d85891 (patch) | |
tree | 921267ebdc9757ee770db6ef74032a6524d94bfa /include | |
parent | ecc721a72c121e8b641d68efd24a225abedb9a30 (diff) | |
parent | be13ec668d043e5313985014d34735ec6ede074a (diff) |
Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time again a smaller update consisting of:
- support for TI DA8xx dma controller and updates to the cppi driver
- updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor,
ioat, dmatest"
* tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits)
dmaengine: pl08x: remove lock documentation
dmaengine: pl08x: fix pl08x_dma_chan_state documentation
dmaengine: pl08x: Use the BIT() macro consistently
dmaengine: pl080: Fix some missing kerneldoc
dmaengine: pl080: Cut some unused defines
dmaengine: dmatest: Add check for supported buffer count (sg_buffers)
dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
dmaengine: virt-dma: Convert to use list_for_each_entry_safe()
dma-debug: use offset_in_page() macro
dmaengine: mv_xor: use offset_in_page() macro
dmaengine: dmatest: use offset_in_page() macro
dmaengine: sun4i: fix invalid argument
dmaengine: ioat: use setup_timer
dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
dmaengine: pl330: remove pdata based initialization
dmaengine: cppi: fix build error due to bad variable
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
dmaengine: cppi41: use managed functions devm_*()
dmaengine: cppi41: fix cppi41_dma_tx_status() logic
dmaengine: qcom_hidma: pause the channel on shutdown
...
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/amba/pl080.h | 50 | ||||
-rw-r--r-- | include/linux/amba/pl330.h | 35 |
2 files changed, 21 insertions, 64 deletions
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h index 91b84a7f0539..580b5323a717 100644 --- a/include/linux/amba/pl080.h +++ b/include/linux/amba/pl080.h @@ -38,24 +38,16 @@ #define PL080_SOFT_LSREQ (0x2C) #define PL080_CONFIG (0x30) -#define PL080_CONFIG_M2_BE (1 << 2) -#define PL080_CONFIG_M1_BE (1 << 1) -#define PL080_CONFIG_ENABLE (1 << 0) +#define PL080_CONFIG_M2_BE BIT(2) +#define PL080_CONFIG_M1_BE BIT(1) +#define PL080_CONFIG_ENABLE BIT(0) #define PL080_SYNC (0x34) /* Per channel configuration registers */ -#define PL080_Cx_STRIDE (0x20) +/* Per channel configuration registers */ #define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) -#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) -#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) -#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) - #define PL080_CH_SRC_ADDR (0x00) #define PL080_CH_DST_ADDR (0x04) #define PL080_CH_LLI (0x08) @@ -66,18 +58,18 @@ #define PL080_LLI_ADDR_MASK (0x3fffffff << 2) #define PL080_LLI_ADDR_SHIFT (2) -#define PL080_LLI_LM_AHB2 (1 << 0) +#define PL080_LLI_LM_AHB2 BIT(0) -#define PL080_CONTROL_TC_IRQ_EN (1 << 31) +#define PL080_CONTROL_TC_IRQ_EN BIT(31) #define PL080_CONTROL_PROT_MASK (0x7 << 28) #define PL080_CONTROL_PROT_SHIFT (28) -#define PL080_CONTROL_PROT_CACHE (1 << 30) -#define PL080_CONTROL_PROT_BUFF (1 << 29) -#define PL080_CONTROL_PROT_SYS (1 << 28) -#define PL080_CONTROL_DST_INCR (1 << 27) -#define PL080_CONTROL_SRC_INCR (1 << 26) -#define PL080_CONTROL_DST_AHB2 (1 << 25) -#define PL080_CONTROL_SRC_AHB2 (1 << 24) +#define PL080_CONTROL_PROT_CACHE BIT(30) +#define PL080_CONTROL_PROT_BUFF BIT(29) +#define PL080_CONTROL_PROT_SYS BIT(28) +#define PL080_CONTROL_DST_INCR BIT(27) +#define PL080_CONTROL_SRC_INCR BIT(26) +#define PL080_CONTROL_DST_AHB2 BIT(25) +#define PL080_CONTROL_SRC_AHB2 BIT(24) #define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) #define PL080_CONTROL_DWIDTH_SHIFT (21) #define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) @@ -103,20 +95,20 @@ #define PL080_WIDTH_16BIT (0x1) #define PL080_WIDTH_32BIT (0x2) -#define PL080N_CONFIG_ITPROT (1 << 20) -#define PL080N_CONFIG_SECPROT (1 << 19) -#define PL080_CONFIG_HALT (1 << 18) -#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ -#define PL080_CONFIG_LOCK (1 << 16) -#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) -#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) +#define PL080N_CONFIG_ITPROT BIT(20) +#define PL080N_CONFIG_SECPROT BIT(19) +#define PL080_CONFIG_HALT BIT(18) +#define PL080_CONFIG_ACTIVE BIT(17) /* RO */ +#define PL080_CONFIG_LOCK BIT(16) +#define PL080_CONFIG_TC_IRQ_MASK BIT(15) +#define PL080_CONFIG_ERR_IRQ_MASK BIT(14) #define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) #define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) #define PL080_CONFIG_DST_SEL_MASK (0xf << 6) #define PL080_CONFIG_DST_SEL_SHIFT (6) #define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) #define PL080_CONFIG_SRC_SEL_SHIFT (1) -#define PL080_CONFIG_ENABLE (1 << 0) +#define PL080_CONFIG_ENABLE BIT(0) #define PL080_FLOW_MEM2MEM (0x0) #define PL080_FLOW_MEM2PER (0x1) diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h deleted file mode 100644 index fe93758e8403..000000000000 --- a/include/linux/amba/pl330.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/include/linux/amba/pl330.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __AMBA_PL330_H_ -#define __AMBA_PL330_H_ - -#include <linux/dmaengine.h> - -struct dma_pl330_platdata { - /* - * Number of valid peripherals connected to DMAC. - * This may be different from the value read from - * CR0, as the PL330 implementation might have 'holes' - * in the peri list or the peri could also be reached - * from another DMAC which the platform prefers. - */ - u8 nr_valid_peri; - /* Array of valid peripherals */ - u8 *peri_id; - /* Operational capabilities */ - dma_cap_mask_t cap_mask; - /* Bytes to allocate for MC buffer */ - unsigned mcbuf_sz; -}; - -extern bool pl330_filter(struct dma_chan *chan, void *param); -#endif /* __AMBA_PL330_H_ */ |