Merge tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big pull request for char/misc drivers for 4.16-rc1.

  There's a lot of stuff in here. Three new driver subsystems were added
  for various types of hardware busses:

   - siox
   - slimbus
   - soundwire

  as well as a new vboxguest subsystem for the VirtualBox hypervisor
  drivers.

  There's also big updates from the FPGA subsystem, lots of Android
  binder fixes, the usual handful of hyper-v updates, and lots of other
  smaller driver updates.

  All of these have been in linux-next for a long time, with no reported
  issues"

* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
  char: lp: use true or false for boolean values
  android: binder: use VM_ALLOC to get vm area
  android: binder: Use true and false for boolean values
  lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
  EISA: Delete error message for a failed memory allocation in eisa_probe()
  EISA: Whitespace cleanup
  misc: remove AVR32 dependencies
  virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
  soundwire: Fix a signedness bug
  uio_hv_generic: fix new type mismatch warnings
  uio_hv_generic: fix type mismatch warnings
  auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
  uio_hv_generic: add rescind support
  uio_hv_generic: check that host supports monitor page
  uio_hv_generic: create send and receive buffers
  uio: document uio_hv_generic regions
  doc: fix documentation about uio_hv_generic
  vmbus: add monitor_id and subchannel_id to sysfs per channel
  vmbus: fix ABI documentation
  uio_hv_generic: use ISR callback method
  ...

20 files changed, 1938 insertions, 107 deletions

diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h
index aa66c87c120b..3694821a6d2d 100644
--- a/include/linux/fpga/fpga-bridge.h
+++ b/include/linux/fpga/fpga-bridge.h
@@ -1,10 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/device.h>
-#include <linux/fpga/fpga-mgr.h>
 
 #ifndef _LINUX_FPGA_BRIDGE_H
 #define _LINUX_FPGA_BRIDGE_H
 
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+
 struct fpga_bridge;
 
 /**
@@ -12,11 +13,13 @@ struct fpga_bridge;
  * @enable_show: returns the FPGA bridge's status
  * @enable_set: set a FPGA bridge as enabled or disabled
  * @fpga_bridge_remove: set FPGA into a specific state during driver remove
+ * @groups: optional attribute groups.
  */
 struct fpga_bridge_ops {
 	int (*enable_show)(struct fpga_bridge *bridge);
 	int (*enable_set)(struct fpga_bridge *bridge, bool enable);
 	void (*fpga_bridge_remove)(struct fpga_bridge *bridge);
+	const struct attribute_group **groups;
 };
 
 /**
@@ -43,6 +46,8 @@ struct fpga_bridge {
 
 struct fpga_bridge *of_fpga_bridge_get(struct device_node *node,
 				       struct fpga_image_info *info);
+struct fpga_bridge *fpga_bridge_get(struct device *dev,
+				    struct fpga_image_info *info);
 void fpga_bridge_put(struct fpga_bridge *bridge);
 int fpga_bridge_enable(struct fpga_bridge *bridge);
 int fpga_bridge_disable(struct fpga_bridge *bridge);
@@ -50,9 +55,12 @@ int fpga_bridge_disable(struct fpga_bridge *bridge);
 int fpga_bridges_enable(struct list_head *bridge_list);
 int fpga_bridges_disable(struct list_head *bridge_list);
 void fpga_bridges_put(struct list_head *bridge_list);
-int fpga_bridge_get_to_list(struct device_node *np,
+int fpga_bridge_get_to_list(struct device *dev,
 			    struct fpga_image_info *info,
 			    struct list_head *bridge_list);
+int of_fpga_bridge_get_to_list(struct device_node *np,
+			       struct fpga_image_info *info,
+			       struct list_head *bridge_list);
 
 int fpga_bridge_register(struct device *dev, const char *name,
 			 const struct fpga_bridge_ops *br_ops, void *priv);
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index bfa14bc023fb..3c6de23aabdf 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -1,7 +1,8 @@
 /*
  * FPGA Framework
  *
- *  Copyright (C) 2013-2015 Altera Corporation
+ *  Copyright (C) 2013-2016 Altera Corporation
+ *  Copyright (C) 2017 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -15,12 +16,12 @@
  * You should have received a copy of the GNU General Public License along with
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-
 #ifndef _LINUX_FPGA_MGR_H
 #define _LINUX_FPGA_MGR_H
 
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
 struct fpga_manager;
 struct sg_table;
 
@@ -83,12 +84,26 @@ enum fpga_mgr_states {
  * @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
  * @config_complete_timeout_us: maximum time for FPGA to switch to operating
  *	   status in the write_complete op.
+ * @firmware_name: name of FPGA image firmware file
+ * @sgt: scatter/gather table containing FPGA image
+ * @buf: contiguous buffer containing FPGA image
+ * @count: size of buf
+ * @dev: device that owns this
+ * @overlay: Device Tree overlay
  */
 struct fpga_image_info {
 	u32 flags;
 	u32 enable_timeout_us;
 	u32 disable_timeout_us;
 	u32 config_complete_timeout_us;
+	char *firmware_name;
+	struct sg_table *sgt;
+	const char *buf;
+	size_t count;
+	struct device *dev;
+#ifdef CONFIG_OF
+	struct device_node *overlay;
+#endif
 };
 
 /**
@@ -100,6 +115,7 @@ struct fpga_image_info {
  * @write_sg: write the scatter list of configuration data to the FPGA
  * @write_complete: set FPGA to operating state after writing is done
  * @fpga_remove: optional: Set FPGA into a specific state during driver remove
+ * @groups: optional attribute groups.
  *
  * fpga_manager_ops are the low level functions implemented by a specific
  * fpga manager driver.  The optional ones are tested for NULL before being
@@ -116,6 +132,7 @@ struct fpga_manager_ops {
 	int (*write_complete)(struct fpga_manager *mgr,
 			      struct fpga_image_info *info);
 	void (*fpga_remove)(struct fpga_manager *mgr);
+	const struct attribute_group **groups;
 };
 
 /**
@@ -138,14 +155,14 @@ struct fpga_manager {
 
 #define to_fpga_manager(d) container_of(d, struct fpga_manager, dev)
 
-int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
-		      const char *buf, size_t count);
-int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info,
-			 struct sg_table *sgt);
+struct fpga_image_info *fpga_image_info_alloc(struct device *dev);
+
+void fpga_image_info_free(struct fpga_image_info *info);
+
+int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info);
 
-int fpga_mgr_firmware_load(struct fpga_manager *mgr,
-			   struct fpga_image_info *info,
-			   const char *image_name);
+int fpga_mgr_lock(struct fpga_manager *mgr);
+void fpga_mgr_unlock(struct fpga_manager *mgr);
 
 struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
 
diff --git a/include/linux/fpga/fpga-region.h b/include/linux/fpga/fpga-region.h
new file mode 100644
index 000000000000..b6520318ab9c
--- /dev/null
+++ b/include/linux/fpga/fpga-region.h
@@ -0,0 +1,40 @@
+#ifndef _FPGA_REGION_H
+#define _FPGA_REGION_H
+
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/fpga/fpga-bridge.h>
+
+/**
+ * struct fpga_region - FPGA Region structure
+ * @dev: FPGA Region device
+ * @mutex: enforces exclusive reference to region
+ * @bridge_list: list of FPGA bridges specified in region
+ * @mgr: FPGA manager
+ * @info: FPGA image info
+ * @priv: private data
+ * @get_bridges: optional function to get bridges to a list
+ * @groups: optional attribute groups.
+ */
+struct fpga_region {
+	struct device dev;
+	struct mutex mutex; /* for exclusive reference to region */
+	struct list_head bridge_list;
+	struct fpga_manager *mgr;
+	struct fpga_image_info *info;
+	void *priv;
+	int (*get_bridges)(struct fpga_region *region);
+	const struct attribute_group **groups;
+};
+
+#define to_fpga_region(d) container_of(d, struct fpga_region, dev)
+
+struct fpga_region *fpga_region_class_find(
+	struct device *start, const void *data,
+	int (*match)(struct device *, const void *));
+
+int fpga_region_program_fpga(struct fpga_region *region);
+int fpga_region_register(struct device *dev, struct fpga_region *region);
+int fpga_region_unregister(struct fpga_region *region);
+
+#endif /* _FPGA_REGION_H */
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
deleted file mode 100644
index 4dbe651f71f5..000000000000
--- a/include/linux/i7300_idle.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef I7300_IDLE_H
-#define I7300_IDLE_H
-
-#include <linux/pci.h>
-
-/*
- * I/O AT controls (PCI bus 0 device 8 function 0)
- * DIMM controls (PCI bus 0 device 16 function 1)
- */
-#define IOAT_BUS 0
-#define IOAT_DEVFN PCI_DEVFN(8, 0)
-#define MEMCTL_BUS 0
-#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
-
-struct fbd_ioat {
-	unsigned int vendor;
-	unsigned int ioat_dev;
-	unsigned int enabled;
-};
-
-/*
- * The i5000 chip-set has the same hooks as the i7300
- * but it is not enabled by default and must be manually
- * manually enabled with "forceload=1" because it is
- * only lightly validated.
- */
-
-static const struct fbd_ioat fbd_ioat_list[] = {
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
-	{0, 0}
-};
-
-/* table of devices that work with this driver */
-static const struct pci_device_id pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-	{ } /* Terminating entry */
-};
-
-/* Check for known platforms with I/O-AT */
-static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
-						struct pci_dev **ioat_dev,
-						int enable_all)
-{
-	int i;
-	struct pci_dev *memdev, *dmadev;
-
-	memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
-	if (!memdev)
-		return -ENODEV;
-
-	for (i = 0; pci_tbl[i].vendor != 0; i++) {
-		if (memdev->vendor == pci_tbl[i].vendor &&
-		    memdev->device == pci_tbl[i].device) {
-			break;
-		}
-	}
-	if (pci_tbl[i].vendor == 0)
-		return -ENODEV;
-
-	dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
-	if (!dmadev)
-		return -ENODEV;
-
-	for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
-		if (dmadev->vendor == fbd_ioat_list[i].vendor &&
-		    dmadev->device == fbd_ioat_list[i].ioat_dev) {
-			if (!(fbd_ioat_list[i].enabled || enable_all))
-				continue;
-			if (fbd_dev)
-				*fbd_dev = memdev;
-			if (ioat_dev)
-				*ioat_dev = dmadev;
-
-			return 0;
-		}
-	}
-	return -ENODEV;
-}
-
-#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index abb6dc2ebbf8..48fb2b43c35a 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -229,6 +229,12 @@ struct hda_device_id {
 	unsigned long driver_data;
 };
 
+struct sdw_device_id {
+	__u16 mfg_id;
+	__u16 part_id;
+	kernel_ulong_t driver_data;
+};
+
 /*
  * Struct used for matching a device
  */
@@ -452,6 +458,19 @@ struct spi_device_id {
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };
 
+/* SLIMbus */
+
+#define SLIMBUS_NAME_SIZE	32
+#define SLIMBUS_MODULE_PREFIX	"slim:"
+
+struct slim_device_id {
+	__u16 manf_id, prod_code;
+	__u16 dev_index, instance;
+
+	/* Data private to the driver */
+	kernel_ulong_t driver_data;
+};
+
 #define SPMI_NAME_SIZE	32
 #define SPMI_MODULE_PREFIX "spmi:"
 
diff --git a/include/linux/mux/consumer.h b/include/linux/mux/consumer.h
index ea96d4c82be7..5fc6bb2fefad 100644
--- a/include/linux/mux/consumer.h
+++ b/include/linux/mux/consumer.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mux/consumer.h - definitions for the multiplexer consumer interface
  *
  * Copyright (C) 2017 Axentia Technologies AB
  *
  * Author: Peter Rosin <peda@axentia.se>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef _LINUX_MUX_CONSUMER_H
diff --git a/include/linux/mux/driver.h b/include/linux/mux/driver.h
index 35c3579c3304..627a2c6bc02d 100644
--- a/include/linux/mux/driver.h
+++ b/include/linux/mux/driver.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * mux/driver.h - definitions for the multiplexer driver interface
  *
  * Copyright (C) 2017 Axentia Technologies AB
  *
  * Author: Peter Rosin <peda@axentia.se>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef _LINUX_MUX_DRIVER_H
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 20268b7d5001..6a3aeba40e9e 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -24,6 +24,7 @@ struct module;
 struct device;
 struct i2c_client;
 struct irq_domain;
+struct slim_device;
 struct spi_device;
 struct spmi_device;
 struct regmap;
@@ -511,6 +512,10 @@ struct regmap *__regmap_init_i2c(struct i2c_client *i2c,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
 				 const char *lock_name);
+struct regmap *__regmap_init_slimbus(struct slim_device *slimbus,
+				 const struct regmap_config *config,
+				 struct lock_class_key *lock_key,
+				 const char *lock_name);
 struct regmap *__regmap_init_spi(struct spi_device *dev,
 				 const struct regmap_config *config,
 				 struct lock_class_key *lock_key,
@@ -636,6 +641,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
 				i2c, config)
 
 /**
+ * regmap_init_slimbus() - Initialise register map
+ *
+ * @slimbus: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_slimbus(slimbus, config)				\
+	__regmap_lockdep_wrapper(__regmap_init_slimbus, #config,	\
+				slimbus, config)
+
+/**
  * regmap_init_spi() - Initialise register map
  *
  * @dev: Device that will be interacted with
diff --git a/include/linux/siox.h b/include/linux/siox.h
new file mode 100644
index 000000000000..d79624e83134
--- /dev/null
+++ b/include/linux/siox.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/device.h>
+
+#define to_siox_device(_dev)	container_of((_dev), struct siox_device, dev)
+struct siox_device {
+	struct list_head node; /* node in smaster->devices */
+	struct siox_master *smaster;
+	struct device dev;
+
+	const char *type;
+	size_t inbytes;
+	size_t outbytes;
+	u8 statustype;
+
+	u8 status_read_clean;
+	u8 status_written;
+	u8 status_written_lastcycle;
+	bool connected;
+
+	/* statistics */
+	unsigned int watchdog_errors;
+	unsigned int status_errors;
+
+	struct kernfs_node *status_errors_kn;
+	struct kernfs_node *watchdog_kn;
+	struct kernfs_node *watchdog_errors_kn;
+	struct kernfs_node *connected_kn;
+};
+
+bool siox_device_synced(struct siox_device *sdevice);
+bool siox_device_connected(struct siox_device *sdevice);
+
+struct siox_driver {
+	int (*probe)(struct siox_device *sdevice);
+	int (*remove)(struct siox_device *sdevice);
+	void (*shutdown)(struct siox_device *sdevice);
+
+	/*
+	 * buf is big enough to hold sdev->inbytes - 1 bytes, the status byte
+	 * is in the scope of the framework.
+	 */
+	int (*set_data)(struct siox_device *sdevice, u8 status, u8 buf[]);
+	/*
+	 * buf is big enough to hold sdev->outbytes - 1 bytes, the status byte
+	 * is in the scope of the framework
+	 */
+	int (*get_data)(struct siox_device *sdevice, const u8 buf[]);
+
+	struct device_driver driver;
+};
+
+static inline struct siox_driver *to_siox_driver(struct device_driver *driver)
+{
+	if (driver)
+		return container_of(driver, struct siox_driver, driver);
+	else
+		return NULL;
+}
+
+int __siox_driver_register(struct siox_driver *sdriver, struct module *owner);
+
+static inline int siox_driver_register(struct siox_driver *sdriver)
+{
+	return __siox_driver_register(sdriver, THIS_MODULE);
+}
+
+static inline void siox_driver_unregister(struct siox_driver *sdriver)
+{
+	return driver_unregister(&sdriver->driver);
+}
diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h
new file mode 100644
index 000000000000..c36cf121d2cd
--- /dev/null
+++ b/include/linux/slimbus.h
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2017, The Linux Foundation
+ */
+
+#ifndef _LINUX_SLIMBUS_H
+#define _LINUX_SLIMBUS_H
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/mod_devicetable.h>
+
+extern struct bus_type slimbus_bus;
+
+/**
+ * struct slim_eaddr - Enumeration address for a SLIMbus device
+ * @manf_id: Manufacturer Id for the device
+ * @prod_code: Product code
+ * @dev_index: Device index
+ * @instance: Instance value
+ */
+struct slim_eaddr {
+	u16 manf_id;
+	u16 prod_code;
+	u8 dev_index;
+	u8 instance;
+} __packed;
+
+/**
+ * enum slim_device_status - slim device status
+ * @SLIM_DEVICE_STATUS_DOWN: Slim device is absent or not reported yet.
+ * @SLIM_DEVICE_STATUS_UP: Slim device is announced on the bus.
+ * @SLIM_DEVICE_STATUS_RESERVED: Reserved for future use.
+ */
+enum slim_device_status {
+	SLIM_DEVICE_STATUS_DOWN = 0,
+	SLIM_DEVICE_STATUS_UP,
+	SLIM_DEVICE_STATUS_RESERVED,
+};
+
+struct slim_controller;
+
+/**
+ * struct slim_device - Slim device handle.
+ * @dev: Driver model representation of the device.
+ * @e_addr: Enumeration address of this device.
+ * @status: slim device status
+ * @ctrl: slim controller instance.
+ * @laddr: 1-byte Logical address of this device.
+ * @is_laddr_valid: indicates if the laddr is valid or not
+ *
+ * This is the client/device handle returned when a SLIMbus
+ * device is registered with a controller.
+ * Pointer to this structure is used by client-driver as a handle.
+ */
+struct slim_device {
+	struct device		dev;
+	struct slim_eaddr	e_addr;
+	struct slim_controller	*ctrl;
+	enum slim_device_status	status;
+	u8			laddr;
+	bool			is_laddr_valid;
+};
+
+#define to_slim_device(d) container_of(d, struct slim_device, dev)
+
+/**
+ * struct slim_driver - SLIMbus 'generic device' (slave) device driver
+ *				(similar to 'spi_device' on SPI)
+ * @probe: Binds this driver to a SLIMbus device.
+ * @remove: Unbinds this driver from the SLIMbus device.
+ * @shutdown: Standard shutdown callback used during powerdown/halt.
+ * @device_status: This callback is called when
+ *	- The device reports present and gets a laddr assigned
+ *	- The device reports absent, or the bus goes down.
+ * @driver: SLIMbus device drivers should initialize name and owner field of
+ *	    this structure
+ * @id_table: List of SLIMbus devices supported by this driver
+ */
+
+struct slim_driver {
+	int	(*probe)(struct slim_device *sl);
+	void	(*remove)(struct slim_device *sl);
+	void	(*shutdown)(struct slim_device *sl);
+	int	(*device_status)(struct slim_device *sl,
+				 enum slim_device_status s);
+	struct device_driver		driver;
+	const struct slim_device_id	*id_table;
+};
+#define to_slim_driver(d) container_of(d, struct slim_driver, driver)
+
+/**
+ * struct slim_val_inf - Slimbus value or information element
+ * @start_offset: Specifies starting offset in information/value element map
+ * @rbuf: buffer to read the values
+ * @wbuf: buffer to write
+ * @num_bytes: upto 16. This ensures that the message will fit the slicesize
+ *		per SLIMbus spec
+ * @comp: completion for asynchronous operations, valid only if TID is
+ *	  required for transaction, like REQUEST operations.
+ *	  Rest of the transactions are synchronous anyway.
+ */
+struct slim_val_inf {
+	u16			start_offset;
+	u8			num_bytes;
+	u8			*rbuf;
+	const u8		*wbuf;
+	struct	completion	*comp;
+};
+
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define slim_driver_register(drv) \
+	__slim_driver_register(drv, THIS_MODULE)
+int __slim_driver_register(struct slim_driver *drv, struct module *owner);
+void slim_driver_unregister(struct slim_driver *drv);
+
+/**
+ * module_slim_driver() - Helper macro for registering a SLIMbus driver
+ * @__slim_driver: slimbus_driver struct
+ *
+ * Helper macro for SLIMbus drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_slim_driver(__slim_driver) \
+	module_driver(__slim_driver, slim_driver_register, \
+			slim_driver_unregister)
+
+static inline void *slim_get_devicedata(const struct slim_device *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void slim_set_devicedata(struct slim_device *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+struct slim_device *slim_get_device(struct slim_controller *ctrl,
+				    struct slim_eaddr *e_addr);
+int slim_get_logical_addr(struct slim_device *sbdev);
+
+/* Information Element management messages */
+#define SLIM_MSG_MC_REQUEST_INFORMATION          0x20
+#define SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION    0x21
+#define SLIM_MSG_MC_REPLY_INFORMATION            0x24
+#define SLIM_MSG_MC_CLEAR_INFORMATION            0x28
+#define SLIM_MSG_MC_REPORT_INFORMATION           0x29
+
+/* Value Element management messages */
+#define SLIM_MSG_MC_REQUEST_VALUE                0x60
+#define SLIM_MSG_MC_REQUEST_CHANGE_VALUE         0x61
+#define SLIM_MSG_MC_REPLY_VALUE                  0x64
+#define SLIM_MSG_MC_CHANGE_VALUE                 0x68
+
+int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg,
+		  u8 mc);
+int slim_readb(struct slim_device *sdev, u32 addr);
+int slim_writeb(struct slim_device *sdev, u32 addr, u8 value);
+int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val);
+int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val);
+#endif /* _LINUX_SLIMBUS_H */
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
new file mode 100644
index 000000000000..e91fdcf41049
--- /dev/null
+++ b/include/linux/soundwire/sdw.h
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2015-17 Intel Corporation.
+
+#ifndef __SOUNDWIRE_H
+#define __SOUNDWIRE_H
+
+struct sdw_bus;
+struct sdw_slave;
+
+/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */
+
+/* SDW Broadcast Device Number */
+#define SDW_BROADCAST_DEV_NUM		15
+
+/* SDW Enumeration Device Number */
+#define SDW_ENUM_DEV_NUM		0
+
+/* SDW Group Device Numbers */
+#define SDW_GROUP12_DEV_NUM		12
+#define SDW_GROUP13_DEV_NUM		13
+
+/* SDW Master Device Number, not supported yet */
+#define SDW_MASTER_DEV_NUM		14
+
+#define SDW_NUM_DEV_ID_REGISTERS	6
+
+#define SDW_MAX_DEVICES			11
+
+/**
+ * enum sdw_slave_status - Slave status
+ * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus.
+ * @SDW_SLAVE_ATTACHED: Slave is attached with bus.
+ * @SDW_SLAVE_ALERT: Some alert condition on the Slave
+ * @SDW_SLAVE_RESERVED: Reserved for future use
+ */
+enum sdw_slave_status {
+	SDW_SLAVE_UNATTACHED = 0,
+	SDW_SLAVE_ATTACHED = 1,
+	SDW_SLAVE_ALERT = 2,
+	SDW_SLAVE_RESERVED = 3,
+};
+
+/**
+ * enum sdw_command_response - Command response as defined by SDW spec
+ * @SDW_CMD_OK: cmd was successful
+ * @SDW_CMD_IGNORED: cmd was ignored
+ * @SDW_CMD_FAIL: cmd was NACKed
+ * @SDW_CMD_TIMEOUT: cmd timedout
+ * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above
+ *
+ * NOTE: The enum is different than actual Spec as response in the Spec is
+ * combination of ACK/NAK bits
+ *
+ * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec
+ */
+enum sdw_command_response {
+	SDW_CMD_OK = 0,
+	SDW_CMD_IGNORED = 1,
+	SDW_CMD_FAIL = 2,
+	SDW_CMD_TIMEOUT = 3,
+	SDW_CMD_FAIL_OTHER = 4,
+};
+
+/*
+ * SDW properties, defined in MIPI DisCo spec v1.0
+ */
+enum sdw_clk_stop_reset_behave {
+	SDW_CLK_STOP_KEEP_STATUS = 1,
+};
+
+/**
+ * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a
+ * read
+ * @SDW_P15_READ_IGNORED: Read is ignored
+ * @SDW_P15_CMD_OK: Command is ok
+ */
+enum sdw_p15_behave {
+	SDW_P15_READ_IGNORED = 0,
+	SDW_P15_CMD_OK = 1,
+};
+
+/**
+ * enum sdw_dpn_type - Data port types
+ * @SDW_DPN_FULL: Full Data Port is supported
+ * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec.
+ * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3
+ * are not implemented.
+ * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec.
+ * DPN_SampleCtrl2, DPN_HCtrl are not implemented.
+ */
+enum sdw_dpn_type {
+	SDW_DPN_FULL = 0,
+	SDW_DPN_SIMPLE = 1,
+	SDW_DPN_REDUCED = 2,
+};
+
+/**
+ * enum sdw_clk_stop_mode - Clock Stop modes
+ * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock
+ * restart
+ * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode,
+ * not capable of continuing operation seamlessly when the clock restarts
+ */
+enum sdw_clk_stop_mode {
+	SDW_CLK_STOP_MODE0 = 0,
+	SDW_CLK_STOP_MODE1 = 1,
+};
+
+/**
+ * struct sdw_dp0_prop - DP0 properties
+ * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @num_words: number of wordlengths supported
+ * @words: wordlengths supported
+ * @flow_controlled: Slave implementation results in an OK_NotReady
+ * response
+ * @simple_ch_prep_sm: If channel prepare sequence is required
+ * @device_interrupts: If implementation-defined interrupts are supported
+ *
+ * The wordlengths are specified by Spec as max, min AND number of
+ * discrete values, implementation can define based on the wordlengths they
+ * support
+ */
+struct sdw_dp0_prop {
+	u32 max_word;
+	u32 min_word;
+	u32 num_words;
+	u32 *words;
+	bool flow_controlled;
+	bool simple_ch_prep_sm;
+	bool device_interrupts;
+};
+
+/**
+ * struct sdw_dpn_audio_mode - Audio mode properties for DPn
+ * @bus_min_freq: Minimum bus frequency, in Hz
+ * @bus_max_freq: Maximum bus frequency, in Hz
+ * @bus_num_freq: Number of discrete frequencies supported
+ * @bus_freq: Discrete bus frequencies, in Hz
+ * @min_freq: Minimum sampling frequency, in Hz
+ * @max_freq: Maximum sampling bus frequency, in Hz
+ * @num_freq: Number of discrete sampling frequency supported
+ * @freq: Discrete sampling frequencies, in Hz
+ * @prep_ch_behave: Specifies the dependencies between Channel Prepare
+ * sequence and bus clock configuration
+ * If 0, Channel Prepare can happen at any Bus clock rate
+ * If 1, Channel Prepare sequence shall happen only after Bus clock is
+ * changed to a frequency supported by this mode or compatible modes
+ * described by the next field
+ * @glitchless: Bitmap describing possible glitchless transitions from this
+ * Audio Mode to other Audio Modes
+ */
+struct sdw_dpn_audio_mode {
+	u32 bus_min_freq;
+	u32 bus_max_freq;
+	u32 bus_num_freq;
+	u32 *bus_freq;
+	u32 max_freq;
+	u32 min_freq;
+	u32 num_freq;
+	u32 *freq;
+	u32 prep_ch_behave;
+	u32 glitchless;
+};
+
+/**
+ * struct sdw_dpn_prop - Data Port DPn properties
+ * @num: port number
+ * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
+ * (inclusive)
+ * @num_words: Number of discrete supported wordlengths
+ * @words: Discrete supported wordlength
+ * @type: Data port type. Full, Simplified or Reduced
+ * @max_grouping: Maximum number of samples that can be grouped together for
+ * a full data port
+ * @simple_ch_prep_sm: If the port supports simplified channel prepare state
+ * machine
+ * @ch_prep_timeout: Port-specific timeout value, in milliseconds
+ * @device_interrupts: If set, each bit corresponds to support for
+ * implementation-defined interrupts
+ * @max_ch: Maximum channels supported
+ * @min_ch: Minimum channels supported
+ * @num_ch: Number of discrete channels supported
+ * @ch: Discrete channels supported
+ * @num_ch_combinations: Number of channel combinations supported
+ * @ch_combinations: Channel combinations supported
+ * @modes: SDW mode supported
+ * @max_async_buffer: Number of samples that this port can buffer in
+ * asynchronous modes
+ * @block_pack_mode: Type of block port mode supported
+ * @port_encoding: Payload Channel Sample encoding schemes supported
+ * @audio_modes: Audio modes supported
+ */
+struct sdw_dpn_prop {
+	u32 num;
+	u32 max_word;
+	u32 min_word;
+	u32 num_words;
+	u32 *words;
+	enum sdw_dpn_type type;
+	u32 max_grouping;
+	bool simple_ch_prep_sm;
+	u32 ch_prep_timeout;
+	u32 device_interrupts;
+	u32 max_ch;
+	u32 min_ch;
+	u32 num_ch;
+	u32 *ch;
+	u32 num_ch_combinations;
+	u32 *ch_combinations;
+	u32 modes;
+	u32 max_async_buffer;
+	bool block_pack_mode;
+	u32 port_encoding;
+	struct sdw_dpn_audio_mode *audio_modes;
+};
+
+/**
+ * struct sdw_slave_prop - SoundWire Slave properties
+ * @mipi_revision: Spec version of the implementation
+ * @wake_capable: Wake-up events are supported
+ * @test_mode_capable: If test mode is supported
+ * @clk_stop_mode1: Clock-Stop Mode 1 is supported
+ * @simple_clk_stop_capable: Simple clock mode is supported
+ * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State
+ * Machine transitions, in milliseconds
+ * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine
+ * transitions, in milliseconds
+ * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare
+ * state machine (P=1 SCSP_SM) after exit from clock-stop mode1
+ * @high_PHY_capable: Slave is HighPHY capable
+ * @paging_support: Slave implements paging registers SCP_AddrPage1 and
+ * SCP_AddrPage2
+ * @bank_delay_support: Slave implements bank delay/bridge support registers
+ * SCP_BankDelay and SCP_NextFrame
+ * @p15_behave: Slave behavior when the Master attempts a read to the Port15
+ * alias
+ * @lane_control_support: Slave supports lane control
+ * @master_count: Number of Masters present on this Slave
+ * @source_ports: Bitmap identifying source ports
+ * @sink_ports: Bitmap identifying sink ports
+ * @dp0_prop: Data Port 0 properties
+ * @src_dpn_prop: Source Data Port N properties
+ * @sink_dpn_prop: Sink Data Port N properties
+ */
+struct sdw_slave_prop {
+	u32 mipi_revision;
+	bool wake_capable;
+	bool test_mode_capable;
+	bool clk_stop_mode1;
+	bool simple_clk_stop_capable;
+	u32 clk_stop_timeout;
+	u32 ch_prep_timeout;
+	enum sdw_clk_stop_reset_behave reset_behave;
+	bool high_PHY_capable;
+	bool paging_support;
+	bool bank_delay_support;
+	enum sdw_p15_behave p15_behave;
+	bool lane_control_support;
+	u32 master_count;
+	u32 source_ports;
+	u32 sink_ports;
+	struct sdw_dp0_prop *dp0_prop;
+	struct sdw_dpn_prop *src_dpn_prop;
+	struct sdw_dpn_prop *sink_dpn_prop;
+};
+
+/**
+ * struct sdw_master_prop - Master properties
+ * @revision: MIPI spec version of the implementation
+ * @master_count: Number of masters
+ * @clk_stop_mode: Bitmap for Clock Stop modes supported
+ * @max_freq: Maximum Bus clock frequency, in Hz
+ * @num_clk_gears: Number of clock gears supported
+ * @clk_gears: Clock gears supported
+ * @num_freq: Number of clock frequencies supported, in Hz
+ * @freq: Clock frequencies supported, in Hz
+ * @default_frame_rate: Controller default Frame rate, in Hz
+ * @default_row: Number of rows
+ * @default_col: Number of columns
+ * @dynamic_frame: Dynamic frame supported
+ * @err_threshold: Number of times that software may retry sending a single
+ * command
+ * @dpn_prop: Data Port N properties
+ */
+struct sdw_master_prop {
+	u32 revision;
+	u32 master_count;
+	enum sdw_clk_stop_mode clk_stop_mode;
+	u32 max_freq;
+	u32 num_clk_gears;
+	u32 *clk_gears;
+	u32 num_freq;
+	u32 *freq;
+	u32 default_frame_rate;
+	u32 default_row;
+	u32 default_col;
+	bool dynamic_frame;
+	u32 err_threshold;
+	struct sdw_dpn_prop *dpn_prop;
+};
+
+int sdw_master_read_prop(struct sdw_bus *bus);
+int sdw_slave_read_prop(struct sdw_slave *slave);
+
+/*
+ * SDW Slave Structures and APIs
+ */
+
+/**
+ * struct sdw_slave_id - Slave ID
+ * @mfg_id: MIPI Manufacturer ID
+ * @part_id: Device Part ID
+ * @class_id: MIPI Class ID, unused now.
+ * Currently a placeholder in MIPI SoundWire Spec
+ * @unique_id: Device unique ID
+ * @sdw_version: SDW version implemented
+ *
+ * The order of the IDs here does not follow the DisCo spec definitions
+ */
+struct sdw_slave_id {
+	__u16 mfg_id;
+	__u16 part_id;
+	__u8 class_id;
+	__u8 unique_id:4;
+	__u8 sdw_version:4;
+};
+
+/**
+ * struct sdw_slave_intr_status - Slave interrupt status
+ * @control_port: control port status
+ * @port: data port status
+ */
+struct sdw_slave_intr_status {
+	u8 control_port;
+	u8 port[15];
+};
+
+/**
+ * struct sdw_slave_ops - Slave driver callback ops
+ * @read_prop: Read Slave properties
+ * @interrupt_callback: Device interrupt notification (invoked in thread
+ * context)
+ * @update_status: Update Slave status
+ */
+struct sdw_slave_ops {
+	int (*read_prop)(struct sdw_slave *sdw);
+	int (*interrupt_callback)(struct sdw_slave *slave,
+			struct sdw_slave_intr_status *status);
+	int (*update_status)(struct sdw_slave *slave,
+			enum sdw_slave_status status);
+};
+
+/**
+ * struct sdw_slave - SoundWire Slave
+ * @id: MIPI device ID
+ * @dev: Linux device
+ * @status: Status reported by the Slave
+ * @bus: Bus handle
+ * @ops: Slave callback ops
+ * @prop: Slave properties
+ * @node: node for bus list
+ * @port_ready: Port ready completion flag for each Slave port
+ * @dev_num: Device Number assigned by Bus
+ */
+struct sdw_slave {
+	struct sdw_slave_id id;
+	struct device dev;
+	enum sdw_slave_status status;
+	struct sdw_bus *bus;
+	const struct sdw_slave_ops *ops;
+	struct sdw_slave_prop prop;
+	struct list_head node;
+	struct completion *port_ready;
+	u16 dev_num;
+};
+
+#define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev)
+
+struct sdw_driver {
+	const char *name;
+
+	int (*probe)(struct sdw_slave *sdw,
+			const struct sdw_device_id *id);
+	int (*remove)(struct sdw_slave *sdw);
+	void (*shutdown)(struct sdw_slave *sdw);
+
+	const struct sdw_device_id *id_table;
+	const struct sdw_slave_ops *ops;
+
+	struct device_driver driver;
+};
+
+#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \
+	{ .mfg_id = (_mfg_id), .part_id = (_part_id), \
+	  .driver_data = (unsigned long)(_drv_data) }
+
+int sdw_handle_slave_status(struct sdw_bus *bus,
+			enum sdw_slave_status status[]);
+
+/*
+ * SDW master structures and APIs
+ */
+
+struct sdw_msg;
+
+/**
+ * struct sdw_defer - SDW deffered message
+ * @length: message length
+ * @complete: message completion
+ * @msg: SDW message
+ */
+struct sdw_defer {
+	int length;
+	struct completion complete;
+	struct sdw_msg *msg;
+};
+
+/**
+ * struct sdw_master_ops - Master driver ops
+ * @read_prop: Read Master properties
+ * @xfer_msg: Transfer message callback
+ * @xfer_msg_defer: Defer version of transfer message callback
+ * @reset_page_addr: Reset the SCP page address registers
+ */
+struct sdw_master_ops {
+	int (*read_prop)(struct sdw_bus *bus);
+
+	enum sdw_command_response (*xfer_msg)
+			(struct sdw_bus *bus, struct sdw_msg *msg);
+	enum sdw_command_response (*xfer_msg_defer)
+			(struct sdw_bus *bus, struct sdw_msg *msg,
+			struct sdw_defer *defer);
+	enum sdw_command_response (*reset_page_addr)
+			(struct sdw_bus *bus, unsigned int dev_num);
+};
+
+/**
+ * struct sdw_bus - SoundWire bus
+ * @dev: Master linux device
+ * @link_id: Link id number, can be 0 to N, unique for each Master
+ * @slaves: list of Slaves on this bus
+ * @assigned: Bitmap for Slave device numbers.
+ * Bit set implies used number, bit clear implies unused number.
+ * @bus_lock: bus lock
+ * @msg_lock: message lock
+ * @ops: Master callback ops
+ * @prop: Master properties
+ * @defer_msg: Defer message
+ * @clk_stop_timeout: Clock stop timeout computed
+ */
+struct sdw_bus {
+	struct device *dev;
+	unsigned int link_id;
+	struct list_head slaves;
+	DECLARE_BITMAP(assigned, SDW_MAX_DEVICES);
+	struct mutex bus_lock;
+	struct mutex msg_lock;
+	const struct sdw_master_ops *ops;
+	struct sdw_master_prop prop;
+	struct sdw_defer defer_msg;
+	unsigned int clk_stop_timeout;
+};
+
+int sdw_add_bus_master(struct sdw_bus *bus);
+void sdw_delete_bus_master(struct sdw_bus *bus);
+
+/* messaging and data APIs */
+
+int sdw_read(struct sdw_slave *slave, u32 addr);
+int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
+int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+
+#endif /* __SOUNDWIRE_H */
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
new file mode 100644
index 000000000000..4b37528f592d
--- /dev/null
+++ b/include/linux/soundwire/sdw_intel.h
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2015-17 Intel Corporation.
+
+#ifndef __SDW_INTEL_H
+#define __SDW_INTEL_H
+
+/**
+ * struct sdw_intel_res - Soundwire Intel resource structure
+ * @mmio_base: mmio base of SoundWire registers
+ * @irq: interrupt number
+ * @handle: ACPI parent handle
+ * @parent: parent device
+ */
+struct sdw_intel_res {
+	void __iomem *mmio_base;
+	int irq;
+	acpi_handle handle;
+	struct device *parent;
+};
+
+void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res);
+void sdw_intel_exit(void *arg);
+
+#endif
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
new file mode 100644
index 000000000000..df472b1ab410
--- /dev/null
+++ b/include/linux/soundwire/sdw_registers.h
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2015-17 Intel Corporation.
+
+#ifndef __SDW_REGISTERS_H
+#define __SDW_REGISTERS_H
+
+/*
+ * typically we define register and shifts but if one observes carefully,
+ * the shift can be generated from MASKS using few bit primitaives like ffs
+ * etc, so we use that and avoid defining shifts
+ */
+#define SDW_REG_SHIFT(n)			(ffs(n) - 1)
+
+/*
+ * SDW registers as defined by MIPI 1.1 Spec
+ */
+#define SDW_REGADDR				GENMASK(14, 0)
+#define SDW_SCP_ADDRPAGE2_MASK			GENMASK(22, 15)
+#define SDW_SCP_ADDRPAGE1_MASK			GENMASK(30, 23)
+
+#define SDW_REG_NO_PAGE				0x00008000
+#define SDW_REG_OPTIONAL_PAGE			0x00010000
+#define SDW_REG_MAX				0x80000000
+
+#define SDW_DPN_SIZE				0x100
+#define SDW_BANK1_OFFSET			0x10
+
+/*
+ * DP0 Interrupt register & bits
+ *
+ * Spec treats Status (RO) and Clear (WC) as separate but they are same
+ * address, so treat as same register with WC.
+ */
+
+/* both INT and STATUS register are same */
+#define SDW_DP0_INT				0x0
+#define SDW_DP0_INTMASK				0x1
+#define SDW_DP0_PORTCTRL			0x2
+#define SDW_DP0_BLOCKCTRL1			0x3
+#define SDW_DP0_PREPARESTATUS			0x4
+#define SDW_DP0_PREPARECTRL			0x5
+
+#define SDW_DP0_INT_TEST_FAIL			BIT(0)
+#define SDW_DP0_INT_PORT_READY			BIT(1)
+#define SDW_DP0_INT_BRA_FAILURE			BIT(2)
+#define SDW_DP0_INT_IMPDEF1			BIT(5)
+#define SDW_DP0_INT_IMPDEF2			BIT(6)
+#define SDW_DP0_INT_IMPDEF3			BIT(7)
+
+#define SDW_DP0_PORTCTRL_DATAMODE		GENMASK(3, 2)
+#define SDW_DP0_PORTCTRL_NXTINVBANK		BIT(4)
+#define SDW_DP0_PORTCTRL_BPT_PAYLD		GENMASK(7, 6)
+
+#define SDW_DP0_CHANNELEN			0x20
+#define SDW_DP0_SAMPLECTRL1			0x22
+#define SDW_DP0_SAMPLECTRL2			0x23
+#define SDW_DP0_OFFSETCTRL1			0x24
+#define SDW_DP0_OFFSETCTRL2			0x25
+#define SDW_DP0_HCTRL				0x26
+#define SDW_DP0_LANECTRL			0x28
+
+/* Both INT and STATUS register are same */
+#define SDW_SCP_INT1				0x40
+#define SDW_SCP_INTMASK1			0x41
+
+#define SDW_SCP_INT1_PARITY			BIT(0)
+#define SDW_SCP_INT1_BUS_CLASH			BIT(1)
+#define SDW_SCP_INT1_IMPL_DEF			BIT(2)
+#define SDW_SCP_INT1_SCP2_CASCADE		BIT(7)
+#define SDW_SCP_INT1_PORT0_3			GENMASK(6, 3)
+
+#define SDW_SCP_INTSTAT2			0x42
+#define SDW_SCP_INTSTAT2_SCP3_CASCADE		BIT(7)
+#define SDW_SCP_INTSTAT2_PORT4_10		GENMASK(6, 0)
+
+
+#define SDW_SCP_INTSTAT3			0x43
+#define SDW_SCP_INTSTAT3_PORT11_14		GENMASK(3, 0)
+
+/* Number of interrupt status registers */
+#define SDW_NUM_INT_STAT_REGISTERS		3
+
+/* Number of interrupt clear registers */
+#define SDW_NUM_INT_CLEAR_REGISTERS		1
+
+#define SDW_SCP_CTRL				0x44
+#define SDW_SCP_CTRL_CLK_STP_NOW		BIT(1)
+#define SDW_SCP_CTRL_FORCE_RESET		BIT(7)
+
+#define SDW_SCP_STAT				0x44
+#define SDW_SCP_STAT_CLK_STP_NF			BIT(0)
+#define SDW_SCP_STAT_HPHY_NOK			BIT(5)
+#define SDW_SCP_STAT_CURR_BANK			BIT(6)
+
+#define SDW_SCP_SYSTEMCTRL			0x45
+#define SDW_SCP_SYSTEMCTRL_CLK_STP_PREP		BIT(0)
+#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE		BIT(2)
+#define SDW_SCP_SYSTEMCTRL_WAKE_UP_EN		BIT(3)
+#define SDW_SCP_SYSTEMCTRL_HIGH_PHY		BIT(4)
+
+#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE0	0
+#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE1	BIT(2)
+
+#define SDW_SCP_DEVNUMBER			0x46
+#define SDW_SCP_HIGH_PHY_CHECK			0x47
+#define SDW_SCP_ADDRPAGE1			0x48
+#define SDW_SCP_ADDRPAGE2			0x49
+#define SDW_SCP_KEEPEREN			0x4A
+#define SDW_SCP_BANKDELAY			0x4B
+#define SDW_SCP_TESTMODE			0x4F
+#define SDW_SCP_DEVID_0				0x50
+#define SDW_SCP_DEVID_1				0x51
+#define SDW_SCP_DEVID_2				0x52
+#define SDW_SCP_DEVID_3				0x53
+#define SDW_SCP_DEVID_4				0x54
+#define SDW_SCP_DEVID_5				0x55
+
+/* Banked Registers */
+#define SDW_SCP_FRAMECTRL_B0			0x60
+#define SDW_SCP_FRAMECTRL_B1			(0x60 + SDW_BANK1_OFFSET)
+#define SDW_SCP_NEXTFRAME_B0			0x61
+#define SDW_SCP_NEXTFRAME_B1			(0x61 + SDW_BANK1_OFFSET)
+
+/* Both INT and STATUS register is same */
+#define SDW_DPN_INT(n)				(0x0 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_INTMASK(n)			(0x1 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_PORTCTRL(n)			(0x2 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_BLOCKCTRL1(n)			(0x3 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_PREPARESTATUS(n)		(0x4 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_PREPARECTRL(n)			(0x5 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_INT_TEST_FAIL			BIT(0)
+#define SDW_DPN_INT_PORT_READY			BIT(1)
+#define SDW_DPN_INT_IMPDEF1			BIT(5)
+#define SDW_DPN_INT_IMPDEF2			BIT(6)
+#define SDW_DPN_INT_IMPDEF3			BIT(7)
+
+#define SDW_DPN_PORTCTRL_FLOWMODE		GENMASK(1, 0)
+#define SDW_DPN_PORTCTRL_DATAMODE		GENMASK(3, 2)
+#define SDW_DPN_PORTCTRL_NXTINVBANK		BIT(4)
+
+#define SDW_DPN_BLOCKCTRL1_WDLEN		GENMASK(5, 0)
+
+#define SDW_DPN_PREPARECTRL_CH_PREP		GENMASK(7, 0)
+
+#define SDW_DPN_CHANNELEN_B0(n)			(0x20 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_CHANNELEN_B1(n)			(0x30 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_BLOCKCTRL2_B0(n)		(0x21 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_BLOCKCTRL2_B1(n)		(0x31 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_SAMPLECTRL1_B0(n)		(0x22 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_SAMPLECTRL1_B1(n)		(0x32 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_SAMPLECTRL2_B0(n)		(0x23 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_SAMPLECTRL2_B1(n)		(0x33 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_OFFSETCTRL1_B0(n)		(0x24 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_OFFSETCTRL1_B1(n)		(0x34 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_OFFSETCTRL2_B0(n)		(0x25 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_OFFSETCTRL2_B1(n)		(0x35 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_HCTRL_B0(n)			(0x26 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_HCTRL_B1(n)			(0x36 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_BLOCKCTRL3_B0(n)		(0x27 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_BLOCKCTRL3_B1(n)		(0x37 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_LANECTRL_B0(n)			(0x28 + SDW_DPN_SIZE * (n))
+#define SDW_DPN_LANECTRL_B1(n)			(0x38 + SDW_DPN_SIZE * (n))
+
+#define SDW_DPN_SAMPLECTRL_LOW			GENMASK(7, 0)
+#define SDW_DPN_SAMPLECTRL_HIGH			GENMASK(15, 8)
+
+#define SDW_DPN_HCTRL_HSTART			GENMASK(7, 4)
+#define SDW_DPN_HCTRL_HSTOP			GENMASK(3, 0)
+
+#define SDW_NUM_CASC_PORT_INTSTAT1		4
+#define SDW_CASC_PORT_START_INTSTAT1		0
+#define SDW_CASC_PORT_MASK_INTSTAT1		0x8
+#define SDW_CASC_PORT_REG_OFFSET_INTSTAT1	0x0
+
+#define SDW_NUM_CASC_PORT_INTSTAT2		7
+#define SDW_CASC_PORT_START_INTSTAT2		4
+#define SDW_CASC_PORT_MASK_INTSTAT2		1
+#define SDW_CASC_PORT_REG_OFFSET_INTSTAT2	1
+
+#define SDW_NUM_CASC_PORT_INTSTAT3		4
+#define SDW_CASC_PORT_START_INTSTAT3		11
+#define SDW_CASC_PORT_MASK_INTSTAT3		1
+#define SDW_CASC_PORT_REG_OFFSET_INTSTAT3	2
+
+#endif /* __SDW_REGISTERS_H */
diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h
new file mode 100644
index 000000000000..9fd553e553e9
--- /dev/null
+++ b/include/linux/soundwire/sdw_type.h
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright(c) 2015-17 Intel Corporation.
+
+#ifndef __SOUNDWIRE_TYPES_H
+#define __SOUNDWIRE_TYPES_H
+
+extern struct bus_type sdw_bus_type;
+
+#define drv_to_sdw_driver(_drv) container_of(_drv, struct sdw_driver, driver)
+
+#define sdw_register_driver(drv) \
+	__sdw_register_driver(drv, THIS_MODULE)
+
+int __sdw_register_driver(struct sdw_driver *drv, struct module *);
+void sdw_unregister_driver(struct sdw_driver *drv);
+
+int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
+
+#endif /* __SOUNDWIRE_TYPES_H */
diff --git a/include/linux/vbox_utils.h b/include/linux/vbox_utils.h
new file mode 100644
index 000000000000..c71def6b310f
--- /dev/null
+++ b/include/linux/vbox_utils.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */
+/* Copyright (C) 2006-2016 Oracle Corporation */
+
+#ifndef __VBOX_UTILS_H__
+#define __VBOX_UTILS_H__
+
+#include <linux/printk.h>
+#include <linux/vbox_vmmdev_types.h>
+
+struct vbg_dev;
+
+/**
+ * vboxguest logging functions, these log both to the backdoor and call
+ * the equivalent kernel pr_foo function.
+ */
+__printf(1, 2) void vbg_info(const char *fmt, ...);
+__printf(1, 2) void vbg_warn(const char *fmt, ...);
+__printf(1, 2) void vbg_err(const char *fmt, ...);
+
+/* Only use backdoor logging for non-dynamic debug builds */
+#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG)
+__printf(1, 2) void vbg_debug(const char *fmt, ...);
+#else
+#define vbg_debug pr_debug
+#endif
+
+/**
+ * Allocate memory for generic request and initialize the request header.
+ *
+ * Return: the allocated memory
+ * @len:		Size of memory block required for the request.
+ * @req_type:		The generic request type.
+ */
+void *vbg_req_alloc(size_t len, enum vmmdev_request_type req_type);
+
+/**
+ * Perform a generic request.
+ *
+ * Return: VBox status code
+ * @gdev:		The Guest extension device.
+ * @req:		Pointer to the request structure.
+ */
+int vbg_req_perform(struct vbg_dev *gdev, void *req);
+
+int vbg_hgcm_connect(struct vbg_dev *gdev,
+		     struct vmmdev_hgcm_service_location *loc,
+		     u32 *client_id, int *vbox_status);
+
+int vbg_hgcm_disconnect(struct vbg_dev *gdev, u32 client_id, int *vbox_status);
+
+int vbg_hgcm_call(struct vbg_dev *gdev, u32 client_id, u32 function,
+		  u32 timeout_ms, struct vmmdev_hgcm_function_parameter *parms,
+		  u32 parm_count, int *vbox_status);
+
+int vbg_hgcm_call32(
+	struct vbg_dev *gdev, u32 client_id, u32 function, u32 timeout_ms,
+	struct vmmdev_hgcm_function_parameter32 *parm32, u32 parm_count,
+	int *vbox_status);
+
+/**
+ * Convert a VirtualBox status code to a standard Linux kernel return value.
+ * Return: 0 or negative errno value.
+ * @rc:			VirtualBox status code to convert.
+ */
+int vbg_status_code_to_errno(int rc);
+
+/**
+ * Helper for the vboxsf driver to get a reference to the guest device.
+ * Return: a pointer to the gdev; or a ERR_PTR value on error.
+ */
+struct vbg_dev *vbg_get_gdev(void);
+
+/**
+ * Helper for the vboxsf driver to put a guest device reference.
+ * @gdev:		Reference returned by vbg_get_gdev to put.
+ */
+void vbg_put_gdev(struct vbg_dev *gdev);
+
+#endif
diff --git a/include/trace/events/siox.h b/include/trace/events/siox.h
new file mode 100644
index 000000000000..68a43fc2c3a5
--- /dev/null
+++ b/include/trace/events/siox.h
@@ -0,0 +1,66 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM siox
+
+#if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SIOX_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(siox_set_data,
+	    TP_PROTO(const struct siox_master *smaster,
+		     const struct siox_device *sdevice,
+		     unsigned int devno, size_t bufoffset),
+	    TP_ARGS(smaster, sdevice, devno, bufoffset),
+	    TP_STRUCT__entry(
+			     __field(int, busno)
+			     __field(unsigned int, devno)
+			     __field(size_t, inbytes)
+			     __dynamic_array(u8, buf, sdevice->inbytes)
+			    ),
+	    TP_fast_assign(
+			   __entry->busno = smaster->busno;
+			   __entry->devno = devno;
+			   __entry->inbytes = sdevice->inbytes;
+			   memcpy(__get_dynamic_array(buf),
+				  smaster->buf + bufoffset, sdevice->inbytes);
+			  ),
+	    TP_printk("siox-%d-%u [%*phD]",
+		      __entry->busno,
+		      __entry->devno,
+		      (int)__entry->inbytes, __get_dynamic_array(buf)
+		     )
+);
+
+TRACE_EVENT(siox_get_data,
+	    TP_PROTO(const struct siox_master *smaster,
+		     const struct siox_device *sdevice,
+		     unsigned int devno, u8 status_clean,
+		     size_t bufoffset),
+	    TP_ARGS(smaster, sdevice, devno, status_clean, bufoffset),
+	    TP_STRUCT__entry(
+			     __field(int, busno)
+			     __field(unsigned int, devno)
+			     __field(u8, status_clean)
+			     __field(size_t, outbytes)
+			     __dynamic_array(u8, buf, sdevice->outbytes)
+			    ),
+	    TP_fast_assign(
+			   __entry->busno = smaster->busno;
+			   __entry->devno = devno;
+			   __entry->status_clean = status_clean;
+			   __entry->outbytes = sdevice->outbytes;
+			   memcpy(__get_dynamic_array(buf),
+				  smaster->buf + bufoffset, sdevice->outbytes);
+			  ),
+	    TP_printk("siox-%d-%u (%02hhx) [%*phD]",
+		      __entry->busno,
+		      __entry->devno,
+		      __entry->status_clean,
+		      (int)__entry->outbytes, __get_dynamic_array(buf)
+		     )
+);
+
+#endif /* if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ) */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h
index dafcfe4e4834..8589a27037d7 100644
--- a/include/uapi/linux/lp.h
+++ b/include/uapi/linux/lp.h
@@ -8,6 +8,8 @@
 #ifndef _UAPI_LINUX_LP_H
 #define _UAPI_LINUX_LP_H
 
+#include <linux/types.h>
+#include <linux/ioctl.h>
 
 /*
  * Per POSIX guidelines, this module reserves the LP and lp prefixes
@@ -88,7 +90,15 @@
 #define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
 #endif
 #define LPGETFLAGS  0x060e  /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
+#define LPSETTIMEOUT_OLD 0x060f /* set parport timeout */
+#define LPSETTIMEOUT_NEW \
+	_IOW(0x6, 0xf, __s64[2]) /* set parport timeout */
+#if __BITS_PER_LONG == 64
+#define LPSETTIMEOUT LPSETTIMEOUT_OLD
+#else
+#define LPSETTIMEOUT (sizeof(time_t) > sizeof(__kernel_long_t) ? \
+	LPSETTIMEOUT_NEW : LPSETTIMEOUT_OLD)
+#endif
 
 /* timeout for printk'ing a timeout, in jiffies (100ths of a second).
    This is also used for re-checking error conditions if LP_ABORT is
diff --git a/include/uapi/linux/vbox_err.h b/include/uapi/linux/vbox_err.h
new file mode 100644
index 000000000000..7eae536ff1e6
--- /dev/null
+++ b/include/uapi/linux/vbox_err.h
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2017 Oracle Corporation */
+
+#ifndef __UAPI_VBOX_ERR_H__
+#define __UAPI_VBOX_ERR_H__
+
+#define VINF_SUCCESS                        0
+#define VERR_GENERAL_FAILURE                (-1)
+#define VERR_INVALID_PARAMETER              (-2)
+#define VERR_INVALID_MAGIC                  (-3)
+#define VERR_INVALID_HANDLE                 (-4)
+#define VERR_LOCK_FAILED                    (-5)
+#define VERR_INVALID_POINTER                (-6)
+#define VERR_IDT_FAILED                     (-7)
+#define VERR_NO_MEMORY                      (-8)
+#define VERR_ALREADY_LOADED                 (-9)
+#define VERR_PERMISSION_DENIED              (-10)
+#define VERR_VERSION_MISMATCH               (-11)
+#define VERR_NOT_IMPLEMENTED                (-12)
+#define VERR_INVALID_FLAGS                  (-13)
+
+#define VERR_NOT_EQUAL                      (-18)
+#define VERR_NOT_SYMLINK                    (-19)
+#define VERR_NO_TMP_MEMORY                  (-20)
+#define VERR_INVALID_FMODE                  (-21)
+#define VERR_WRONG_ORDER                    (-22)
+#define VERR_NO_TLS_FOR_SELF                (-23)
+#define VERR_FAILED_TO_SET_SELF_TLS         (-24)
+#define VERR_NO_CONT_MEMORY                 (-26)
+#define VERR_NO_PAGE_MEMORY                 (-27)
+#define VERR_THREAD_IS_DEAD                 (-29)
+#define VERR_THREAD_NOT_WAITABLE            (-30)
+#define VERR_PAGE_TABLE_NOT_PRESENT         (-31)
+#define VERR_INVALID_CONTEXT                (-32)
+#define VERR_TIMER_BUSY                     (-33)
+#define VERR_ADDRESS_CONFLICT               (-34)
+#define VERR_UNRESOLVED_ERROR               (-35)
+#define VERR_INVALID_FUNCTION               (-36)
+#define VERR_NOT_SUPPORTED                  (-37)
+#define VERR_ACCESS_DENIED                  (-38)
+#define VERR_INTERRUPTED                    (-39)
+#define VERR_TIMEOUT                        (-40)
+#define VERR_BUFFER_OVERFLOW                (-41)
+#define VERR_TOO_MUCH_DATA                  (-42)
+#define VERR_MAX_THRDS_REACHED              (-43)
+#define VERR_MAX_PROCS_REACHED              (-44)
+#define VERR_SIGNAL_REFUSED                 (-45)
+#define VERR_SIGNAL_PENDING                 (-46)
+#define VERR_SIGNAL_INVALID                 (-47)
+#define VERR_STATE_CHANGED                  (-48)
+#define VERR_INVALID_UUID_FORMAT            (-49)
+#define VERR_PROCESS_NOT_FOUND              (-50)
+#define VERR_PROCESS_RUNNING                (-51)
+#define VERR_TRY_AGAIN                      (-52)
+#define VERR_PARSE_ERROR                    (-53)
+#define VERR_OUT_OF_RANGE                   (-54)
+#define VERR_NUMBER_TOO_BIG                 (-55)
+#define VERR_NO_DIGITS                      (-56)
+#define VERR_NEGATIVE_UNSIGNED              (-57)
+#define VERR_NO_TRANSLATION                 (-58)
+
+#define VERR_NOT_FOUND                      (-78)
+#define VERR_INVALID_STATE                  (-79)
+#define VERR_OUT_OF_RESOURCES               (-80)
+
+#define VERR_FILE_NOT_FOUND                 (-102)
+#define VERR_PATH_NOT_FOUND                 (-103)
+#define VERR_INVALID_NAME                   (-104)
+#define VERR_ALREADY_EXISTS                 (-105)
+#define VERR_TOO_MANY_OPEN_FILES            (-106)
+#define VERR_SEEK                           (-107)
+#define VERR_NEGATIVE_SEEK                  (-108)
+#define VERR_SEEK_ON_DEVICE                 (-109)
+#define VERR_EOF                            (-110)
+#define VERR_READ_ERROR                     (-111)
+#define VERR_WRITE_ERROR                    (-112)
+#define VERR_WRITE_PROTECT                  (-113)
+#define VERR_SHARING_VIOLATION              (-114)
+#define VERR_FILE_LOCK_FAILED               (-115)
+#define VERR_FILE_LOCK_VIOLATION            (-116)
+#define VERR_CANT_CREATE                    (-117)
+#define VERR_CANT_DELETE_DIRECTORY          (-118)
+#define VERR_NOT_SAME_DEVICE                (-119)
+#define VERR_FILENAME_TOO_LONG              (-120)
+#define VERR_MEDIA_NOT_PRESENT              (-121)
+#define VERR_MEDIA_NOT_RECOGNIZED           (-122)
+#define VERR_FILE_NOT_LOCKED                (-123)
+#define VERR_FILE_LOCK_LOST                 (-124)
+#define VERR_DIR_NOT_EMPTY                  (-125)
+#define VERR_NOT_A_DIRECTORY                (-126)
+#define VERR_IS_A_DIRECTORY                 (-127)
+#define VERR_FILE_TOO_BIG                   (-128)
+
+#define VERR_NET_IO_ERROR                       (-400)
+#define VERR_NET_OUT_OF_RESOURCES               (-401)
+#define VERR_NET_HOST_NOT_FOUND                 (-402)
+#define VERR_NET_PATH_NOT_FOUND                 (-403)
+#define VERR_NET_PRINT_ERROR                    (-404)
+#define VERR_NET_NO_NETWORK                     (-405)
+#define VERR_NET_NOT_UNIQUE_NAME                (-406)
+
+#define VERR_NET_IN_PROGRESS                    (-436)
+#define VERR_NET_ALREADY_IN_PROGRESS            (-437)
+#define VERR_NET_NOT_SOCKET                     (-438)
+#define VERR_NET_DEST_ADDRESS_REQUIRED          (-439)
+#define VERR_NET_MSG_SIZE                       (-440)
+#define VERR_NET_PROTOCOL_TYPE                  (-441)
+#define VERR_NET_PROTOCOL_NOT_AVAILABLE         (-442)
+#define VERR_NET_PROTOCOL_NOT_SUPPORTED         (-443)
+#define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED      (-444)
+#define VERR_NET_OPERATION_NOT_SUPPORTED        (-445)
+#define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED  (-446)
+#define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED   (-447)
+#define VERR_NET_ADDRESS_IN_USE                 (-448)
+#define VERR_NET_ADDRESS_NOT_AVAILABLE          (-449)
+#define VERR_NET_DOWN                           (-450)
+#define VERR_NET_UNREACHABLE                    (-451)
+#define VERR_NET_CONNECTION_RESET               (-452)
+#define VERR_NET_CONNECTION_ABORTED             (-453)
+#define VERR_NET_CONNECTION_RESET_BY_PEER       (-454)
+#define VERR_NET_NO_BUFFER_SPACE                (-455)
+#define VERR_NET_ALREADY_CONNECTED              (-456)
+#define VERR_NET_NOT_CONNECTED                  (-457)
+#define VERR_NET_SHUTDOWN                       (-458)
+#define VERR_NET_TOO_MANY_REFERENCES            (-459)
+#define VERR_NET_CONNECTION_TIMED_OUT           (-460)
+#define VERR_NET_CONNECTION_REFUSED             (-461)
+#define VERR_NET_HOST_DOWN                      (-464)
+#define VERR_NET_HOST_UNREACHABLE               (-465)
+#define VERR_NET_PROTOCOL_ERROR                 (-466)
+#define VERR_NET_INCOMPLETE_TX_PACKET           (-467)
+
+/* misc. unsorted codes */
+#define VERR_RESOURCE_BUSY                      (-138)
+#define VERR_DISK_FULL                          (-152)
+#define VERR_TOO_MANY_SYMLINKS                  (-156)
+#define VERR_NO_MORE_FILES                      (-201)
+#define VERR_INTERNAL_ERROR                     (-225)
+#define VERR_INTERNAL_ERROR_2                   (-226)
+#define VERR_INTERNAL_ERROR_3                   (-227)
+#define VERR_INTERNAL_ERROR_4                   (-228)
+#define VERR_DEV_IO_ERROR                       (-250)
+#define VERR_IO_BAD_LENGTH                      (-255)
+#define VERR_BROKEN_PIPE                        (-301)
+#define VERR_NO_DATA                            (-304)
+#define VERR_SEM_DESTROYED                      (-363)
+#define VERR_DEADLOCK                           (-365)
+#define VERR_BAD_EXE_FORMAT                     (-608)
+#define VINF_HGCM_ASYNC_EXECUTE                 (2903)
+
+#endif
diff --git a/include/uapi/linux/vbox_vmmdev_types.h b/include/uapi/linux/vbox_vmmdev_types.h
new file mode 100644
index 000000000000..0e68024f36c7
--- /dev/null
+++ b/include/uapi/linux/vbox_vmmdev_types.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */
+/*
+ * Virtual Device for Guest <-> VMM/Host communication, type definitions
+ * which are also used for the vboxguest ioctl interface / by vboxsf
+ *
+ * Copyright (C) 2006-2016 Oracle Corporation
+ */
+
+#ifndef __UAPI_VBOX_VMMDEV_TYPES_H__
+#define __UAPI_VBOX_VMMDEV_TYPES_H__
+
+#include <asm/bitsperlong.h>
+#include <linux/types.h>
+
+/*
+ * We cannot use linux' compiletime_assert here because it expects to be used
+ * inside a function only. Use a typedef to a char array with a negative size.
+ */
+#define VMMDEV_ASSERT_SIZE(type, size) \
+	typedef char type ## _asrt_size[1 - 2*!!(sizeof(struct type) != (size))]
+
+/** enum vmmdev_request_type - VMMDev request types. */
+enum vmmdev_request_type {
+	VMMDEVREQ_INVALID_REQUEST              =  0,
+	VMMDEVREQ_GET_MOUSE_STATUS             =  1,
+	VMMDEVREQ_SET_MOUSE_STATUS             =  2,
+	VMMDEVREQ_SET_POINTER_SHAPE            =  3,
+	VMMDEVREQ_GET_HOST_VERSION             =  4,
+	VMMDEVREQ_IDLE                         =  5,
+	VMMDEVREQ_GET_HOST_TIME                = 10,
+	VMMDEVREQ_GET_HYPERVISOR_INFO          = 20,
+	VMMDEVREQ_SET_HYPERVISOR_INFO          = 21,
+	VMMDEVREQ_REGISTER_PATCH_MEMORY        = 22, /* since version 3.0.6 */
+	VMMDEVREQ_DEREGISTER_PATCH_MEMORY      = 23, /* since version 3.0.6 */
+	VMMDEVREQ_SET_POWER_STATUS             = 30,
+	VMMDEVREQ_ACKNOWLEDGE_EVENTS           = 41,
+	VMMDEVREQ_CTL_GUEST_FILTER_MASK        = 42,
+	VMMDEVREQ_REPORT_GUEST_INFO            = 50,
+	VMMDEVREQ_REPORT_GUEST_INFO2           = 58, /* since version 3.2.0 */
+	VMMDEVREQ_REPORT_GUEST_STATUS          = 59, /* since version 3.2.8 */
+	VMMDEVREQ_REPORT_GUEST_USER_STATE      = 74, /* since version 4.3 */
+	/* Retrieve a display resize request sent by the host, deprecated. */
+	VMMDEVREQ_GET_DISPLAY_CHANGE_REQ       = 51,
+	VMMDEVREQ_VIDEMODE_SUPPORTED           = 52,
+	VMMDEVREQ_GET_HEIGHT_REDUCTION         = 53,
+	/**
+	 * @VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2:
+	 * Retrieve a display resize request sent by the host.
+	 *
+	 * Queries a display resize request sent from the host.  If the
+	 * event_ack member is sent to true and there is an unqueried request
+	 * available for one of the virtual display then that request will
+	 * be returned.  If several displays have unqueried requests the lowest
+	 * numbered display will be chosen first.  Only the most recent unseen
+	 * request for each display is remembered.
+	 * If event_ack is set to false, the last host request queried with
+	 * event_ack set is resent, or failing that the most recent received
+	 * from the host.  If no host request was ever received then all zeros
+	 * are returned.
+	 */
+	VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2      = 54,
+	VMMDEVREQ_REPORT_GUEST_CAPABILITIES    = 55,
+	VMMDEVREQ_SET_GUEST_CAPABILITIES       = 56,
+	VMMDEVREQ_VIDEMODE_SUPPORTED2          = 57, /* since version 3.2.0 */
+	VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX     = 80, /* since version 4.2.4 */
+	VMMDEVREQ_HGCM_CONNECT                 = 60,
+	VMMDEVREQ_HGCM_DISCONNECT              = 61,
+	VMMDEVREQ_HGCM_CALL32                  = 62,
+	VMMDEVREQ_HGCM_CALL64                  = 63,
+	VMMDEVREQ_HGCM_CANCEL                  = 64,
+	VMMDEVREQ_HGCM_CANCEL2                 = 65,
+	VMMDEVREQ_VIDEO_ACCEL_ENABLE           = 70,
+	VMMDEVREQ_VIDEO_ACCEL_FLUSH            = 71,
+	VMMDEVREQ_VIDEO_SET_VISIBLE_REGION     = 72,
+	VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ      = 73,
+	VMMDEVREQ_QUERY_CREDENTIALS            = 100,
+	VMMDEVREQ_REPORT_CREDENTIALS_JUDGEMENT = 101,
+	VMMDEVREQ_REPORT_GUEST_STATS           = 110,
+	VMMDEVREQ_GET_MEMBALLOON_CHANGE_REQ    = 111,
+	VMMDEVREQ_GET_STATISTICS_CHANGE_REQ    = 112,
+	VMMDEVREQ_CHANGE_MEMBALLOON            = 113,
+	VMMDEVREQ_GET_VRDPCHANGE_REQ           = 150,
+	VMMDEVREQ_LOG_STRING                   = 200,
+	VMMDEVREQ_GET_CPU_HOTPLUG_REQ          = 210,
+	VMMDEVREQ_SET_CPU_HOTPLUG_STATUS       = 211,
+	VMMDEVREQ_REGISTER_SHARED_MODULE       = 212,
+	VMMDEVREQ_UNREGISTER_SHARED_MODULE     = 213,
+	VMMDEVREQ_CHECK_SHARED_MODULES         = 214,
+	VMMDEVREQ_GET_PAGE_SHARING_STATUS      = 215,
+	VMMDEVREQ_DEBUG_IS_PAGE_SHARED         = 216,
+	VMMDEVREQ_GET_SESSION_ID               = 217, /* since version 3.2.8 */
+	VMMDEVREQ_WRITE_COREDUMP               = 218,
+	VMMDEVREQ_GUEST_HEARTBEAT              = 219,
+	VMMDEVREQ_HEARTBEAT_CONFIGURE          = 220,
+	/* Ensure the enum is a 32 bit data-type */
+	VMMDEVREQ_SIZEHACK                     = 0x7fffffff
+};
+
+#if __BITS_PER_LONG == 64
+#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL64
+#else
+#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL32
+#endif
+
+/** HGCM service location types. */
+enum vmmdev_hgcm_service_location_type {
+	VMMDEV_HGCM_LOC_INVALID    = 0,
+	VMMDEV_HGCM_LOC_LOCALHOST  = 1,
+	VMMDEV_HGCM_LOC_LOCALHOST_EXISTING = 2,
+	/* Ensure the enum is a 32 bit data-type */
+	VMMDEV_HGCM_LOC_SIZEHACK   = 0x7fffffff
+};
+
+/** HGCM host service location. */
+struct vmmdev_hgcm_service_location_localhost {
+	/** Service name */
+	char service_name[128];
+};
+VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location_localhost, 128);
+
+/** HGCM service location. */
+struct vmmdev_hgcm_service_location {
+	/** Type of the location. */
+	enum vmmdev_hgcm_service_location_type type;
+
+	union {
+		struct vmmdev_hgcm_service_location_localhost localhost;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location, 128 + 4);
+
+/** HGCM function parameter type. */
+enum vmmdev_hgcm_function_parameter_type {
+	VMMDEV_HGCM_PARM_TYPE_INVALID            = 0,
+	VMMDEV_HGCM_PARM_TYPE_32BIT              = 1,
+	VMMDEV_HGCM_PARM_TYPE_64BIT              = 2,
+	/** Deprecated Doesn't work, use PAGELIST. */
+	VMMDEV_HGCM_PARM_TYPE_PHYSADDR           = 3,
+	/** In and Out, user-memory */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR            = 4,
+	/** In, user-memory  (read;  host<-guest) */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR_IN         = 5,
+	/** Out, user-memory (write; host->guest) */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT        = 6,
+	/** In and Out, kernel-memory */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL     = 7,
+	/** In, kernel-memory  (read;  host<-guest) */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN  = 8,
+	/** Out, kernel-memory (write; host->guest) */
+	VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT = 9,
+	/** Physical addresses of locked pages for a buffer. */
+	VMMDEV_HGCM_PARM_TYPE_PAGELIST           = 10,
+	/* Ensure the enum is a 32 bit data-type */
+	VMMDEV_HGCM_PARM_TYPE_SIZEHACK           = 0x7fffffff
+};
+
+/** HGCM function parameter, 32-bit client. */
+struct vmmdev_hgcm_function_parameter32 {
+	enum vmmdev_hgcm_function_parameter_type type;
+	union {
+		__u32 value32;
+		__u64 value64;
+		struct {
+			__u32 size;
+			union {
+				__u32 phys_addr;
+				__u32 linear_addr;
+			} u;
+		} pointer;
+		struct {
+			/** Size of the buffer described by the page list. */
+			__u32 size;
+			/** Relative to the request header. */
+			__u32 offset;
+		} page_list;
+	} u;
+} __packed;
+VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter32, 4 + 8);
+
+/** HGCM function parameter, 64-bit client. */
+struct vmmdev_hgcm_function_parameter64 {
+	enum vmmdev_hgcm_function_parameter_type type;
+	union {
+		__u32 value32;
+		__u64 value64;
+		struct {
+			__u32 size;
+			union {
+				__u64 phys_addr;
+				__u64 linear_addr;
+			} u;
+		} __packed pointer;
+		struct {
+			/** Size of the buffer described by the page list. */
+			__u32 size;
+			/** Relative to the request header. */
+			__u32 offset;
+		} page_list;
+	} __packed u;
+} __packed;
+VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter64, 4 + 12);
+
+#if __BITS_PER_LONG == 64
+#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter64
+#else
+#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter32
+#endif
+
+#define VMMDEV_HGCM_F_PARM_DIRECTION_NONE      0x00000000U
+#define VMMDEV_HGCM_F_PARM_DIRECTION_TO_HOST   0x00000001U
+#define VMMDEV_HGCM_F_PARM_DIRECTION_FROM_HOST 0x00000002U
+#define VMMDEV_HGCM_F_PARM_DIRECTION_BOTH      0x00000003U
+
+/**
+ * struct vmmdev_hgcm_pagelist - VMMDEV_HGCM_PARM_TYPE_PAGELIST parameters
+ * point to this structure to actually describe the buffer.
+ */
+struct vmmdev_hgcm_pagelist {
+	__u32 flags;             /** VMMDEV_HGCM_F_PARM_*. */
+	__u16 offset_first_page; /** Data offset in the first page. */
+	__u16 page_count;        /** Number of pages. */
+	__u64 pages[1];          /** Page addresses. */
+};
+VMMDEV_ASSERT_SIZE(vmmdev_hgcm_pagelist, 4 + 2 + 2 + 8);
+
+#endif
diff --git a/include/uapi/linux/vboxguest.h b/include/uapi/linux/vboxguest.h
new file mode 100644
index 000000000000..612f0c7d3558
--- /dev/null
+++ b/include/uapi/linux/vboxguest.h
@@ -0,0 +1,330 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */
+/*
+ * VBoxGuest - VirtualBox Guest Additions Driver Interface.
+ *
+ * Copyright (C) 2006-2016 Oracle Corporation
+ */
+
+#ifndef __UAPI_VBOXGUEST_H__
+#define __UAPI_VBOXGUEST_H__
+
+#include <asm/bitsperlong.h>
+#include <linux/ioctl.h>
+#include <linux/vbox_err.h>
+#include <linux/vbox_vmmdev_types.h>
+
+/* Version of vbg_ioctl_hdr structure. */
+#define VBG_IOCTL_HDR_VERSION		0x10001
+/* Default request type.  Use this for non-VMMDev requests. */
+#define VBG_IOCTL_HDR_TYPE_DEFAULT		0
+
+/**
+ * Common ioctl header.
+ *
+ * This is a mirror of vmmdev_request_header to prevent duplicating data and
+ * needing to verify things multiple times.
+ */
+struct vbg_ioctl_hdr {
+	/** IN: The request input size, and output size if size_out is zero. */
+	__u32 size_in;
+	/** IN: Structure version (VBG_IOCTL_HDR_VERSION) */
+	__u32 version;
+	/** IN: The VMMDev request type or VBG_IOCTL_HDR_TYPE_DEFAULT. */
+	__u32 type;
+	/**
+	 * OUT: The VBox status code of the operation, out direction only.
+	 * This is a VINF_ or VERR_ value as defined in vbox_err.h.
+	 */
+	__s32 rc;
+	/** IN: Output size. Set to zero to use size_in as output size. */
+	__u32 size_out;
+	/** Reserved, MBZ. */
+	__u32 reserved;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_hdr, 24);
+
+
+/*
+ * The VBoxGuest I/O control version.
+ *
+ * As usual, the high word contains the major version and changes to it
+ * signifies incompatible changes.
+ *
+ * The lower word is the minor version number, it is increased when new
+ * functions are added or existing changed in a backwards compatible manner.
+ */
+#define VBG_IOC_VERSION		0x00010000u
+
+/**
+ * VBG_IOCTL_DRIVER_VERSION_INFO data structure
+ *
+ * Note VBG_IOCTL_DRIVER_VERSION_INFO may switch the session to a backwards
+ * compatible interface version if uClientVersion indicates older client code.
+ */
+struct vbg_ioctl_driver_version_info {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/** Requested interface version (VBG_IOC_VERSION). */
+			__u32 req_version;
+			/**
+			 * Minimum interface version number (typically the
+			 * major version part of VBG_IOC_VERSION).
+			 */
+			__u32 min_version;
+			/** Reserved, MBZ. */
+			__u32 reserved1;
+			/** Reserved, MBZ. */
+			__u32 reserved2;
+		} in;
+		struct {
+			/** Version for this session (typ. VBG_IOC_VERSION). */
+			__u32 session_version;
+			/** Version of the IDC interface (VBG_IOC_VERSION). */
+			__u32 driver_version;
+			/** The SVN revision of the driver, or 0. */
+			__u32 driver_revision;
+			/** Reserved \#1 (zero until defined). */
+			__u32 reserved1;
+			/** Reserved \#2 (zero until defined). */
+			__u32 reserved2;
+		} out;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_driver_version_info, 24 + 20);
+
+#define VBG_IOCTL_DRIVER_VERSION_INFO \
+	_IOWR('V', 0, struct vbg_ioctl_driver_version_info)
+
+
+/* IOCTL to perform a VMM Device request less than 1KB in size. */
+#define VBG_IOCTL_VMMDEV_REQUEST(s)	_IOC(_IOC_READ | _IOC_WRITE, 'V', 2, s)
+
+
+/* IOCTL to perform a VMM Device request larger then 1KB. */
+#define VBG_IOCTL_VMMDEV_REQUEST_BIG	_IOC(_IOC_READ | _IOC_WRITE, 'V', 3, 0)
+
+
+/** VBG_IOCTL_HGCM_CONNECT data structure. */
+struct vbg_ioctl_hgcm_connect {
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			struct vmmdev_hgcm_service_location loc;
+		} in;
+		struct {
+			__u32 client_id;
+		} out;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_connect, 24 + 132);
+
+#define VBG_IOCTL_HGCM_CONNECT \
+	_IOWR('V', 4, struct vbg_ioctl_hgcm_connect)
+
+
+/** VBG_IOCTL_HGCM_DISCONNECT data structure. */
+struct vbg_ioctl_hgcm_disconnect {
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			__u32 client_id;
+		} in;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_disconnect, 24 + 4);
+
+#define VBG_IOCTL_HGCM_DISCONNECT \
+	_IOWR('V', 5, struct vbg_ioctl_hgcm_disconnect)
+
+
+/** VBG_IOCTL_HGCM_CALL data structure. */
+struct vbg_ioctl_hgcm_call {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	/** Input: The id of the caller. */
+	__u32 client_id;
+	/** Input: Function number. */
+	__u32 function;
+	/**
+	 * Input: How long to wait (milliseconds) for completion before
+	 * cancelling the call. Set to -1 to wait indefinitely.
+	 */
+	__u32 timeout_ms;
+	/** Interruptable flag, ignored for userspace calls. */
+	__u8 interruptible;
+	/** Explicit padding, MBZ. */
+	__u8 reserved;
+	/**
+	 * Input: How many parameters following this structure.
+	 *
+	 * The parameters are either HGCMFunctionParameter64 or 32,
+	 * depending on whether we're receiving a 64-bit or 32-bit request.
+	 *
+	 * The current maximum is 61 parameters (given a 1KB max request size,
+	 * and a 64-bit parameter size of 16 bytes).
+	 */
+	__u16 parm_count;
+	/*
+	 * Parameters follow in form:
+	 * struct hgcm_function_parameter<32|64> parms[parm_count]
+	 */
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_call, 24 + 16);
+
+#define VBG_IOCTL_HGCM_CALL_32(s)	_IOC(_IOC_READ | _IOC_WRITE, 'V', 6, s)
+#define VBG_IOCTL_HGCM_CALL_64(s)	_IOC(_IOC_READ | _IOC_WRITE, 'V', 7, s)
+#if __BITS_PER_LONG == 64
+#define VBG_IOCTL_HGCM_CALL(s)		VBG_IOCTL_HGCM_CALL_64(s)
+#else
+#define VBG_IOCTL_HGCM_CALL(s)		VBG_IOCTL_HGCM_CALL_32(s)
+#endif
+
+
+/** VBG_IOCTL_LOG data structure. */
+struct vbg_ioctl_log {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/**
+			 * The log message, this may be zero terminated. If it
+			 * is not zero terminated then the length is determined
+			 * from the input size.
+			 */
+			char msg[1];
+		} in;
+	} u;
+};
+
+#define VBG_IOCTL_LOG(s)		_IOC(_IOC_READ | _IOC_WRITE, 'V', 9, s)
+
+
+/** VBG_IOCTL_WAIT_FOR_EVENTS data structure. */
+struct vbg_ioctl_wait_for_events {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/** Timeout in milliseconds. */
+			__u32 timeout_ms;
+			/** Events to wait for. */
+			__u32 events;
+		} in;
+		struct {
+			/** Events that occurred. */
+			__u32 events;
+		} out;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_wait_for_events, 24 + 8);
+
+#define VBG_IOCTL_WAIT_FOR_EVENTS \
+	_IOWR('V', 10, struct vbg_ioctl_wait_for_events)
+
+
+/*
+ * IOCTL to VBoxGuest to interrupt (cancel) any pending
+ * VBG_IOCTL_WAIT_FOR_EVENTS and return.
+ *
+ * Handled inside the vboxguest driver and not seen by the host at all.
+ * After calling this, VBG_IOCTL_WAIT_FOR_EVENTS should no longer be called in
+ * the same session. Any VBOXGUEST_IOCTL_WAITEVENT calls in the same session
+ * done after calling this will directly exit with -EINTR.
+ */
+#define VBG_IOCTL_INTERRUPT_ALL_WAIT_FOR_EVENTS \
+	_IOWR('V', 11, struct vbg_ioctl_hdr)
+
+
+/** VBG_IOCTL_CHANGE_FILTER_MASK data structure. */
+struct vbg_ioctl_change_filter {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/** Flags to set. */
+			__u32 or_mask;
+			/** Flags to remove. */
+			__u32 not_mask;
+		} in;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_change_filter, 24 + 8);
+
+/* IOCTL to VBoxGuest to control the event filter mask. */
+#define VBG_IOCTL_CHANGE_FILTER_MASK \
+	_IOWR('V', 12, struct vbg_ioctl_change_filter)
+
+
+/** VBG_IOCTL_CHANGE_GUEST_CAPABILITIES data structure. */
+struct vbg_ioctl_set_guest_caps {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/** Capabilities to set (VMMDEV_GUEST_SUPPORTS_XXX). */
+			__u32 or_mask;
+			/** Capabilities to drop (VMMDEV_GUEST_SUPPORTS_XXX). */
+			__u32 not_mask;
+		} in;
+		struct {
+			/** Capabilities held by the session after the call. */
+			__u32 session_caps;
+			/** Capabilities for all the sessions after the call. */
+			__u32 global_caps;
+		} out;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_set_guest_caps, 24 + 8);
+
+#define VBG_IOCTL_CHANGE_GUEST_CAPABILITIES \
+	_IOWR('V', 14, struct vbg_ioctl_set_guest_caps)
+
+
+/** VBG_IOCTL_CHECK_BALLOON data structure. */
+struct vbg_ioctl_check_balloon {
+	/** The header. */
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			/** The size of the balloon in chunks of 1MB. */
+			__u32 balloon_chunks;
+			/**
+			 * false = handled in R0, no further action required.
+			 *  true = allocate balloon memory in R3.
+			 */
+			__u8 handle_in_r3;
+			/** Explicit padding, MBZ. */
+			__u8 padding[3];
+		} out;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_check_balloon, 24 + 8);
+
+/*
+ * IOCTL to check memory ballooning.
+ *
+ * The guest kernel module will ask the host for the current size of the
+ * balloon and adjust the size. Or it will set handle_in_r3 = true and R3 is
+ * responsible for allocating memory and calling VBG_IOCTL_CHANGE_BALLOON.
+ */
+#define VBG_IOCTL_CHECK_BALLOON \
+	_IOWR('V', 17, struct vbg_ioctl_check_balloon)
+
+
+/** VBG_IOCTL_WRITE_CORE_DUMP data structure. */
+struct vbg_ioctl_write_coredump {
+	struct vbg_ioctl_hdr hdr;
+	union {
+		struct {
+			__u32 flags; /** Flags (reserved, MBZ). */
+		} in;
+	} u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_write_coredump, 24 + 4);
+
+#define VBG_IOCTL_WRITE_CORE_DUMP \
+	_IOWR('V', 19, struct vbg_ioctl_write_coredump)
+
+#endif