Merge tag 'fsi-updates-2018-07-12' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/linux-fsi into char-misc-next

Ben writes:

FSI fixes and updates:

 - Reported build fixes
 - Add configuration of send/echo delayus
 - Object lifetime fix
 - Re-arrange some definitions in preparation for adding the CF master

2 files changed, 117 insertions, 0 deletions

diff --git a/include/trace/events/fsi_master_gpio.h b/include/trace/events/fsi_master_gpio.h
index 389082132433..70ef66e63e84 100644
--- a/include/trace/events/fsi_master_gpio.h
+++ b/include/trace/events/fsi_master_gpio.h
@@ -50,6 +50,22 @@ TRACE_EVENT(fsi_master_gpio_out,
 	)
 );
 
+TRACE_EVENT(fsi_master_gpio_clock_zeros,
+	TP_PROTO(const struct fsi_master_gpio *master, int clocks),
+	TP_ARGS(master, clocks),
+	TP_STRUCT__entry(
+		__field(int,	master_idx)
+		__field(int,	clocks)
+	),
+	TP_fast_assign(
+		__entry->master_idx = master->master.idx;
+		__entry->clocks = clocks;
+	),
+	TP_printk("fsi-gpio%d clock %d zeros",
+		  __entry->master_idx, __entry->clocks
+	)
+);
+
 TRACE_EVENT(fsi_master_gpio_break,
 	TP_PROTO(const struct fsi_master_gpio *master),
 	TP_ARGS(master),
@@ -107,6 +123,49 @@ TRACE_EVENT(fsi_master_gpio_poll_response_busy,
 		__entry->master_idx, __entry->busy)
 );
 
+TRACE_EVENT(fsi_master_gpio_cmd_abs_addr,
+	TP_PROTO(const struct fsi_master_gpio *master, u32 addr),
+	TP_ARGS(master, addr),
+	TP_STRUCT__entry(
+		__field(int,	master_idx)
+		__field(u32,	addr)
+	),
+	TP_fast_assign(
+		__entry->master_idx = master->master.idx;
+		__entry->addr = addr;
+	),
+	TP_printk("fsi-gpio%d: Sending ABS_ADR %06x",
+		__entry->master_idx, __entry->addr)
+);
+
+TRACE_EVENT(fsi_master_gpio_cmd_rel_addr,
+	TP_PROTO(const struct fsi_master_gpio *master, u32 rel_addr),
+	TP_ARGS(master, rel_addr),
+	TP_STRUCT__entry(
+		__field(int,	master_idx)
+		__field(u32,	rel_addr)
+	),
+	TP_fast_assign(
+		__entry->master_idx = master->master.idx;
+		__entry->rel_addr = rel_addr;
+	),
+	TP_printk("fsi-gpio%d: Sending REL_ADR %03x",
+		__entry->master_idx, __entry->rel_addr)
+);
+
+TRACE_EVENT(fsi_master_gpio_cmd_same_addr,
+	TP_PROTO(const struct fsi_master_gpio *master),
+	TP_ARGS(master),
+	TP_STRUCT__entry(
+		__field(int,	master_idx)
+	),
+	TP_fast_assign(
+		__entry->master_idx = master->master.idx;
+	),
+	TP_printk("fsi-gpio%d: Sending SAME_ADR",
+		__entry->master_idx)
+);
+
 #endif /* _TRACE_FSI_MASTER_GPIO_H */
 
 #include <trace/define_trace.h>
diff --git a/include/uapi/linux/fsi.h b/include/uapi/linux/fsi.h
new file mode 100644
index 000000000000..da577ecd90e7
--- /dev/null
+++ b/include/uapi/linux/fsi.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FSI_H
+#define _UAPI_LINUX_FSI_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * /dev/scom "raw" ioctl interface
+ *
+ * The driver supports a high level "read/write" interface which
+ * handles retries and converts the status to Linux error codes,
+ * however low level tools an debugger need to access the "raw"
+ * HW status information and interpret it themselves, so this
+ * ioctl interface is also provided for their use case.
+ */
+
+/* Structure for SCOM read/write */
+struct scom_access {
+	__u64	addr;		/* SCOM address, supports indirect */
+	__u64	data;		/* SCOM data (in for write, out for read) */
+	__u64	mask;		/* Data mask for writes */
+	__u32	intf_errors;	/* Interface error flags */
+#define SCOM_INTF_ERR_PARITY		0x00000001 /* Parity error */
+#define SCOM_INTF_ERR_PROTECTION	0x00000002 /* Blocked by secure boot */
+#define SCOM_INTF_ERR_ABORT		0x00000004 /* PIB reset during access */
+#define SCOM_INTF_ERR_UNKNOWN		0x80000000 /* Unknown error */
+	/*
+	 * Note: Any other bit set in intf_errors need to be considered as an
+	 * error. Future implementations may define new error conditions. The
+	 * pib_status below is only valid if intf_errors is 0.
+	 */
+	__u8	pib_status;	/* 3-bit PIB status */
+#define SCOM_PIB_SUCCESS	0	/* Access successful */
+#define SCOM_PIB_BLOCKED	1	/* PIB blocked, pls retry */
+#define SCOM_PIB_OFFLINE	2	/* Chiplet offline */
+#define SCOM_PIB_PARTIAL	3	/* Partial good */
+#define SCOM_PIB_BAD_ADDR	4	/* Invalid address */
+#define SCOM_PIB_CLK_ERR	5	/* Clock error */
+#define SCOM_PIB_PARITY_ERR	6	/* Parity error on the PIB bus */
+#define SCOM_PIB_TIMEOUT	7	/* Bus timeout */
+	__u8	pad;
+};
+
+/* Flags for SCOM check */
+#define SCOM_CHECK_SUPPORTED	0x00000001	/* Interface supported */
+#define SCOM_CHECK_PROTECTED	0x00000002	/* Interface blocked by secure boot */
+
+/* Flags for SCOM reset */
+#define SCOM_RESET_INTF		0x00000001	/* Reset interface */
+#define SCOM_RESET_PIB		0x00000002	/* Reset PIB */
+
+#define FSI_SCOM_CHECK	_IOR('s', 0x00, __u32)
+#define FSI_SCOM_READ	_IOWR('s', 0x01, struct scom_access)
+#define FSI_SCOM_WRITE	_IOWR('s', 0x02, struct scom_access)
+#define FSI_SCOM_RESET	_IOW('s', 0x03, __u32)
+
+#endif /* _UAPI_LINUX_FSI_H */