Merge tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A fairly quiet release again, a couple of relatively small new
  features and a bunch of driver specific work including yet more code
  elimination and fixes from Axel Lin.

   - Addidion of linear_min_sel for offsetting linear selectors in the
     helpers.
   - Support for continuous voltage ranges for regulators with extremely
     high resolution.
   - Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM
     vexpress."

Fix up trivial conflict (due to typo fix) in palmas-regulator.c

* tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits)
  regulator: core: Fix logic to determinate if regulator can change voltage
  regulator: s5m8767: Fix to work even if no DVS gpio present
  regulator: s5m8767: Fix to read the first DVS register.
  regulator: s5m8767: Fix to work when platform registers less regulators
  regulator: gpio-regulator: gpio_set_value should use cansleep
  regulator: gpio-regulator: Fix logical error in for() loop
  regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
  regulator: anatop: Use linear_min_sel with linear mapping
  regulator: max1586: Implement get_voltage_sel callback
  regulator: lp8788-buck: Kill _gpio_request function
  regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear
  regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode
  regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
  regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
  regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
  regulators: add regulator_can_change_voltage() function
  regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid
  regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp
  regulator: wm831x-dcdc: Ensure selected voltage falls within requested range
  regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear
  ...

11 files changed, 217 insertions, 53 deletions

diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 7671a287dfee..ba26e99c388d 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -76,6 +76,7 @@
 #define ARIZONA_RATE_ESTIMATOR_3                 0x154
 #define ARIZONA_RATE_ESTIMATOR_4                 0x155
 #define ARIZONA_RATE_ESTIMATOR_5                 0x156
+#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1      0x161
 #define ARIZONA_FLL1_CONTROL_1                   0x171
 #define ARIZONA_FLL1_CONTROL_2                   0x172
 #define ARIZONA_FLL1_CONTROL_3                   0x173
@@ -110,6 +111,7 @@
 #define ARIZONA_FLL2_GPIO_CLOCK                  0x1AA
 #define ARIZONA_MIC_CHARGE_PUMP_1                0x200
 #define ARIZONA_LDO1_CONTROL_1                   0x210
+#define ARIZONA_LDO1_CONTROL_2                   0x212
 #define ARIZONA_LDO2_CONTROL_1                   0x213
 #define ARIZONA_MIC_BIAS_CTRL_1                  0x218
 #define ARIZONA_MIC_BIAS_CTRL_2                  0x219
@@ -1574,6 +1576,13 @@
 #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH            5  /* SAMPLE_RATE_DETECT_D - [4:0] */
 
 /*
+ * R353 (0x161) - Dynamic Frequency Scaling 1
+ */
+#define ARIZONA_SUBSYS_MAX_FREQ                  0x0001  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT                 0  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH                 1  /* SUBSYS_MAX_FREQ */
+
+/*
  * R369 (0x171) - FLL1 Control 1
  */
 #define ARIZONA_FLL1_FREERUN                     0x0002  /* FLL1_FREERUN */
@@ -1889,6 +1898,13 @@
 #define ARIZONA_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
 
 /*
+ * R530 (0x212) - LDO1 Control 2
+ */
+#define ARIZONA_LDO1_HI_PWR                      0x0001  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_SHIFT                     0  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_WIDTH                     1  /* LDO1_HI_PWR */
+
+/*
  * R531 (0x213) - LDO2 Control 1
  */
 #define ARIZONA_LDO2_VSEL_MASK                   0x07E0  /* LDO2_VSEL - [10:5] */
diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h
index 147293b4471d..f87a6c172a91 100644
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -25,8 +25,29 @@ struct da9055_pdata {
 	int gpio_base;
 
 	struct regulator_init_data *regulators[DA9055_MAX_REGULATORS];
-	bool reset_enable;		/* Enable RTC in RESET Mode */
-	enum gpio_select *gpio_rsel;	/* Select regulator set thru GPIO 1/2 */
-	enum gpio_select *gpio_ren;	/* Enable regulator thru GPIO 1/2 */
+	/* Enable RTC in RESET Mode */
+	bool reset_enable;
+	/*
+	 * GPI muxed pin to control
+	 * regulator state A/B, 0 if not available.
+	 */
+	int *gpio_ren;
+	/*
+	 * GPI muxed pin to control
+	 * regulator set, 0 if not available.
+	 */
+	int *gpio_rsel;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * that controls the regulator state, 0 if not available.
+	 */
+	enum gpio_select *reg_ren;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * controls the regulator set A/B, 0 if  not available.
+	 */
+	enum gpio_select *reg_rsel;
+	/* GPIOs to enable regulator, 0 if not available */
+	int *ena_gpio;
 };
 #endif /* __DA9055_PDATA_H */
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 830152cfae33..6ae21bf47d64 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -316,6 +316,7 @@ enum max8997_irq {
 #define MAX8997_NUM_GPIO	12
 struct max8997_dev {
 	struct device *dev;
+	struct max8997_platform_data *pdata;
 	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
 	struct i2c_client *rtc; /* slave addr 0x0c */
 	struct i2c_client *haptic; /* slave addr 0x90 */
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 328d8e24b533..1d4a4fe6ac33 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -75,6 +75,7 @@ enum max8998_regulators {
 struct max8997_regulator_data {
 	int id;
 	struct regulator_init_data *initdata;
+	struct device_node *reg_node;
 };
 
 enum max8997_muic_usb_type {
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 6bc31d854626..804e280c1e1d 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -24,6 +24,25 @@
 
 #include <linux/irq.h>
 
+/* TPS65090 Regulator ID */
+enum {
+	TPS65090_REGULATOR_DCDC1,
+	TPS65090_REGULATOR_DCDC2,
+	TPS65090_REGULATOR_DCDC3,
+	TPS65090_REGULATOR_FET1,
+	TPS65090_REGULATOR_FET2,
+	TPS65090_REGULATOR_FET3,
+	TPS65090_REGULATOR_FET4,
+	TPS65090_REGULATOR_FET5,
+	TPS65090_REGULATOR_FET6,
+	TPS65090_REGULATOR_FET7,
+	TPS65090_REGULATOR_LDO1,
+	TPS65090_REGULATOR_LDO2,
+
+	/* Last entry for maximum ID */
+	TPS65090_REGULATOR_MAX,
+};
+
 struct tps65090 {
 	struct mutex		lock;
 	struct device		*dev;
@@ -41,10 +60,26 @@ struct tps65090_subdev_info {
 	void		*platform_data;
 };
 
+/*
+ * struct tps65090_regulator_plat_data
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_ext_control: Enable extrenal control or not. Only available for
+ *     DCDC1, DCDC2 and DCDC3.
+ * @gpio: Gpio number if external control is enabled and controlled through
+ *     gpio.
+ */
+struct tps65090_regulator_plat_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_ext_control;
+	int gpio;
+};
+
 struct tps65090_platform_data {
 	int irq_base;
 	int num_subdevs;
 	struct tps65090_subdev_info *subdevs;
+	struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX];
 };
 
 /*
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index 2dd123194958..f8da0e152567 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -29,6 +29,7 @@ enum {
 	TPS6586X_ID_LDO_8,
 	TPS6586X_ID_LDO_9,
 	TPS6586X_ID_LDO_RTC,
+	TPS6586X_ID_MAX_REGULATOR,
 };
 
 enum {
@@ -79,6 +80,8 @@ struct tps6586x_platform_data {
 	int gpio_base;
 	int irq_base;
 	bool pm_off;
+
+	struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR];
 };
 
 /*
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index c43cd3556b1f..7bc732ce6e50 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -160,6 +160,7 @@ int regulator_bulk_force_disable(int num_consumers,
 void regulator_bulk_free(int num_consumers,
 			 struct regulator_bulk_data *consumers);
 
+int regulator_can_change_voltage(struct regulator *regulator);
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
@@ -358,6 +359,10 @@ static inline void regulator_set_drvdata(struct regulator *regulator,
 {
 }
 
+static inline int regulator_count_voltages(struct regulator *regulator)
+{
+	return 0;
+}
 #endif
 
 static inline int regulator_set_voltage_tol(struct regulator *regulator,
@@ -367,4 +372,12 @@ static inline int regulator_set_voltage_tol(struct regulator *regulator,
 				     new_uV - tol_uV, new_uV + tol_uV);
 }
 
+static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
+						     int target_uV, int tol_uV)
+{
+	return regulator_is_supported_voltage(regulator,
+					      target_uV - tol_uV,
+					      target_uV + tol_uV);
+}
+
 #endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 7932a3bf21bd..d10bb0f39c5e 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -181,10 +181,13 @@ enum regulator_type {
  * @type: Indicates if the regulator is a voltage or current regulator.
  * @owner: Module providing the regulator, used for refcounting.
  *
+ * @continuous_voltage_range: Indicates if the regulator can set any
+ *                            voltage within constrains range.
  * @n_voltages: Number of selectors available for ops.list_voltage().
  *
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @linear_min_sel: Minimal selector for starting linear mapping
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @volt_table: Voltage mapping table (if table based mapping)
  *
@@ -199,6 +202,7 @@ struct regulator_desc {
 	const char *name;
 	const char *supply_name;
 	int id;
+	bool continuous_voltage_range;
 	unsigned n_voltages;
 	struct regulator_ops *ops;
 	int irq;
@@ -207,6 +211,7 @@ struct regulator_desc {
 
 	unsigned int min_uV;
 	unsigned int uV_step;
+	unsigned int linear_min_sel;
 	unsigned int ramp_delay;
 
 	const unsigned int *volt_table;
diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h
new file mode 100644
index 000000000000..f8acc052e353
--- /dev/null
+++ b/include/linux/regulator/max8973-regulator.h
@@ -0,0 +1,72 @@
+/*
+ * max8973-regulator.h -- MAXIM 8973 regulator
+ *
+ * Interface for regulator driver for MAXIM 8973 DC-DC step-down
+ * switching regulator.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8973_H
+#define __LINUX_REGULATOR_MAX8973_H
+
+/*
+ * Control flags for configuration of the device.
+ * Client need to pass this information with ORed
+ */
+#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE			0x00000001
+#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE		0x00000002
+#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE		0x00000004
+#define MAX8973_CONTROL_BIAS_ENABLE				0x00000008
+#define MAX8973_CONTROL_PULL_DOWN_ENABLE			0x00000010
+#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE			0x00000020
+
+#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED			0x00000000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US			0x00010000
+#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US		0x00020000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS	0x00030000
+
+#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL			0x00000000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER		0x00100000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER		0x00200000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER		0x00300000
+
+/*
+ * struct max8973_regulator_platform_data - max8973 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @control_flags: Control flags which are ORed value of above flags to
+ *		configure device.
+ * @enable_ext_control: Enable the voltage enable/disable through external
+ *		control signal from EN input pin. If it is false then
+ *		voltage output will be enabled/disabled through EN bit of
+ *		device register.
+ * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
+ * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
+ */
+struct max8973_regulator_platform_data {
+	struct regulator_init_data *reg_init_data;
+	unsigned long control_flags;
+	bool enable_ext_control;
+	int dvs_gpio;
+	unsigned dvs_def_state:1;
+};
+
+#endif /* __LINUX_REGULATOR_MAX8973_H */
diff --git a/include/linux/regulator/tps51632-regulator.h b/include/linux/regulator/tps51632-regulator.h
new file mode 100644
index 000000000000..d00841e1a75a
--- /dev/null
+++ b/include/linux/regulator/tps51632-regulator.h
@@ -0,0 +1,47 @@
+/*
+ * tps51632-regulator.h -- TPS51632 regulator
+ *
+ * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down
+ * Driverless Controller with serial VID control and DVFS.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS51632_H
+#define __LINUX_REGULATOR_TPS51632_H
+
+/*
+ * struct tps51632_regulator_platform_data - tps51632 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_pwm_dvfs: Enable PWM DVFS or not.
+ * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV.
+ * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode.
+ * @base_voltage_uV: Base voltage when PWM-DVFS enabled.
+ */
+struct tps51632_regulator_platform_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_pwm_dvfs;
+	bool dvfs_step_20mV;
+	int max_voltage_uV;
+	int base_voltage_uV;
+};
+
+#endif /* __LINUX_REGULATOR_TPS51632_H */
diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h
deleted file mode 100644
index 0fa04b64db3e..000000000000
--- a/include/linux/regulator/tps65090-regulator.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Regulator driver interface for TI TPS65090 PMIC family
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
-
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __REGULATOR_TPS65090_H
-#define __REGULATOR_TPS65090_H
-
-#include <linux/regulator/machine.h>
-
-#define tps65090_rails(_name) "tps65090_"#_name
-
-enum {
-	TPS65090_ID_DCDC1,
-	TPS65090_ID_DCDC2,
-	TPS65090_ID_DCDC3,
-	TPS65090_ID_FET1,
-	TPS65090_ID_FET2,
-	TPS65090_ID_FET3,
-	TPS65090_ID_FET4,
-	TPS65090_ID_FET5,
-	TPS65090_ID_FET6,
-	TPS65090_ID_FET7,
-};
-
-/*
- * struct tps65090_regulator_platform_data
- *
- * @regulator: The regulator init data.
- * @slew_rate_uV_per_us: Slew rate microvolt per microsec.
- */
-
-struct tps65090_regulator_platform_data {
-	struct regulator_init_data regulator;
-};
-
-#endif	/* __REGULATOR_TPS65090_H */