Merge tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux

Pull more clock framework changes from Mike Turquette:
 "The second half of the clock framework pull requeust for 3.14 is
  dominated by platform support for Qualcomm's MSM SoCs, DT binding
  updates for TI's OMAP-ish processors and additional support for
  Samsung chips.

  Additionally there are other smaller clock driver changes and several
  last minute fixes.  This pull request also includes the HiSilicon
  support that depends on the already-merged arm-soc pull request"

[ Fix up stupid compile error in the source tree with evil merge  - Grumpy Linus ]

* tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits)
  clk: sort Makefile
  clk: sunxi: fix overflow when setting up divided factors
  clk: Export more clk-provider functions
  dt-bindings: qcom: Fix warning with duplicate dt define
  clk: si5351: remove variant from platform_data
  clk: samsung: Remove unneeded semicolon
  clk: qcom: Fix modular build
  ARM: OMAP3: use DT clock init if DT data is available
  ARM: AM33xx: remove old clock data and link in new clock init code
  ARM: AM43xx: Enable clock init
  ARM: OMAP: DRA7: Enable clock init
  ARM: OMAP4: remove old clock data and link in new clock init code
  ARM: OMAP2+: io: use new clock init API
  ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT
  ARM: OMAP3: hwmod: initialize clkdm from clkdm_name
  ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm
  ARM: OMAP2+: clock: use driver API instead of direct memory read/write
  ARM: OMAP2+: clock: add support for indexed memmaps
  ARM: dts: am43xx clock data
  ARM: dts: AM35xx: use DT clock data
  ...

4 files changed, 301 insertions, 17 deletions

diff --git a/include/dt-bindings/clock/qcom,mmcc-msm8974.h b/include/dt-bindings/clock/qcom,mmcc-msm8974.h
index 04d318d1187a..032ed87ef0f3 100644
--- a/include/dt-bindings/clock/qcom,mmcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,mmcc-msm8974.h
@@ -57,7 +57,7 @@
 #define EXTPCLK_CLK_SRC					40
 #define HDMI_CLK_SRC					41
 #define VSYNC_CLK_SRC					42
-#define RBCPR_CLK_SRC					43
+#define MMSS_RBCPR_CLK_SRC				43
 #define CAMSS_CCI_CCI_AHB_CLK				44
 #define CAMSS_CCI_CCI_CLK				45
 #define CAMSS_CSI0_AHB_CLK				46
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 999b28ba38f7..448b2294820f 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -488,6 +488,8 @@ struct clk_onecell_data {
 	unsigned int clk_num;
 };
 
+extern struct of_device_id __clk_of_table;
+
 #define CLK_OF_DECLARE(name, compat, fn)			\
 	static const struct of_device_id __clk_of_table_##name	\
 		__used __section(__clk_of_table)		\
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 000000000000..092b64168d7f
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,298 @@
+/*
+ * TI clock drivers support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __LINUX_CLK_TI_H__
+#define __LINUX_CLK_TI_H__
+
+#include <linux/clkdev.h>
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @last_rounded_m4xen: cache of the last M4X result of
+ *			omap4_dpll_regm4xen_round_rate()
+ * @last_rounded_lpmode: cache of the last lpmode result of
+ *			 omap4_dpll_lpmode_recalc()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
+ * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	unsigned long		last_rounded_rate;
+	u16			last_rounded_m;
+	u8			last_rounded_m4xen;
+	u8			last_rounded_lpmode;
+	u16			max_multiplier;
+	u8			last_rounded_n;
+	u8			min_divider;
+	u16			max_divider;
+	u8			modes;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
+	u32			autoidle_mask;
+	u32			freqsel_mask;
+	u32			idlest_mask;
+	u32			dco_mask;
+	u32			sddiv_mask;
+	u32			lpmode_mask;
+	u32			m4xen_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	u8			flags;
+};
+
+struct clk_hw_omap_ops;
+
+/**
+ * struct clk_hw_omap - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @ops: clock ops for this clock
+ */
+struct clk_hw_omap {
+	struct clk_hw		hw;
+	struct list_head	node;
+	unsigned long		fixed_rate;
+	u8			fixed_div;
+	void __iomem		*enable_reg;
+	u8			enable_bit;
+	u8			flags;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+	const char		*clkdm_name;
+	struct clockdomain	*clkdm;
+	const struct clk_hw_omap_ops	*ops;
+};
+
+/*
+ * struct clk_hw_omap.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
+ *     with 32bit ops, by default OMAP1 uses 16bit ops.
+ * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
+ * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
+ *     clock is put to no-idle mode.
+ * ENABLE_ON_INIT: Clock is enabled on init.
+ * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
+ *     disable. This inverts the behavior making '0' enable and '1' disable.
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+#define MEMMAP_ADDRESSING	(1 << 6)
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+
+/* Composite clock component types */
+enum {
+	CLK_COMPONENT_TYPE_GATE = 0,
+	CLK_COMPONENT_TYPE_DIVIDER,
+	CLK_COMPONENT_TYPE_MUX,
+	CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+	struct clk_lookup		lk;
+	char				*node_name;
+};
+
+#define DT_CLK(dev, con, name)		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+		},			\
+		.node_name = name,	\
+	}
+
+/* Maximum number of clock memmaps */
+#define CLK_MAX_MEMMAPS			4
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
+/**
+ * struct clk_omap_reg - OMAP register declaration
+ * @offset: offset from the master IP module base address
+ * @index: index of the master IP module
+ */
+struct clk_omap_reg {
+	u16 offset;
+	u16 index;
+};
+
+/**
+ * struct ti_clk_ll_ops - low-level register access ops for a clock
+ * @clk_readl: pointer to register read function
+ * @clk_writel: pointer to register write function
+ *
+ * Low-level register access ops are generally used by the basic clock types
+ * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
+ * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
+ * used by other hardware-specific clock drivers if needed.
+ */
+struct ti_clk_ll_ops {
+	u32	(*clk_readl)(void __iomem *reg);
+	void	(*clk_writel)(u32 val, void __iomem *reg);
+};
+
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+			   unsigned long *parent_rate);
+void omap2_init_clk_clkdm(struct clk_hw *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+int omap2_clk_disable_autoidle_all(void);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+			 unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap3_clk_lock_dpll5(void);
+
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+		      ti_of_clk_init_cb_t func);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
+int omap3430_dt_clk_init(void);
+int omap3630_dt_clk_init(void);
+int am35xx_dt_clk_init(void);
+int ti81xx_dt_clk_init(void);
+int omap4xxx_dt_clk_init(void);
+int omap5xxx_dt_clk_init(void);
+int dra7xx_dt_clk_init(void);
+int am33xx_dt_clk_init(void);
+int am43xx_dt_clk_init(void);
+
+#ifdef CONFIG_OF
+void of_ti_clk_allow_autoidle_all(void);
+void of_ti_clk_deny_autoidle_all(void);
+#else
+static inline void of_ti_clk_allow_autoidle_all(void) { }
+static inline void of_ti_clk_deny_autoidle_all(void) { }
+#endif
+
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+
+#endif
diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
index 54334393ab92..a947ab8b441a 100644
--- a/include/linux/platform_data/si5351.h
+++ b/include/linux/platform_data/si5351.h
@@ -8,20 +8,6 @@
 struct clk;
 
 /**
- * enum si5351_variant - SiLabs Si5351 chip variant
- * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
- * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
- * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
- * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
- */
-enum si5351_variant {
-	SI5351_VARIANT_A = 1,
-	SI5351_VARIANT_A3 = 2,
-	SI5351_VARIANT_B = 3,
-	SI5351_VARIANT_C = 4,
-};
-
-/**
  * enum si5351_pll_src - Si5351 pll clock source
  * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
  * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input
@@ -115,14 +101,12 @@ struct si5351_clkout_config {
 
 /**
  * struct si5351_platform_data - Platform data for the Si5351 clock driver
- * @variant: Si5351 chip variant
  * @clk_xtal: xtal input clock
  * @clk_clkin: clkin input clock
  * @pll_src: array of pll source clock setting
  * @clkout: array of clkout configuration
  */
 struct si5351_platform_data {
-	enum si5351_variant variant;
 	struct clk *clk_xtal;
 	struct clk *clk_clkin;
 	enum si5351_pll_src pll_src[2];