Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 - new driver for eGalaxTouch serial touchscreen
 - new driver for TS-4800 touchscreen
 - an update for Goodix touchscreen driver
 - PS/2 mouse module was reworked to limit number of protocols we try on
   pass-through ports to speed up their detection time
 - wacom_w8001 touchscreen driver now reports pen and touch via separate
   instances of input devices
 - other driver changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
  Input: elantech - mark protocols v2 and v3 as semi-mt
  Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE
  Input: gpio-keys - fix check for disabling unsupported keys
  Input: omap-keypad - remove dead check
  Input: ti_am335x_tsc - fix HWPEN interrupt handling
  Input: omap-keypad - set tasklet data earlier
  Input: rohm_bu21023 - fix handling of retrying firmware update
  Input: ALPS - report v3 pinnacle trackstick device only if is present
  Input: ALPS - detect trackstick presence for v7 protocol
  Input: pcap_ts - use to_delayed_work
  Input: bma150 - constify bma150_cfg structure
  Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
  Input: egalax_ts_serial - fix potential NULL dereference on error
  Input: uinput - sanity check on ff_effects_max and EV_FF
  Input: uinput - rework ABS validation
  Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl
  Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"
  Input: goodix - add axis swapping and axis inversion support
  Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
  Input: goodix - add power management support
  ...

2 files changed, 78 insertions, 3 deletions

diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
index becdd78295cc..c2ea1698257f 100644
--- a/include/uapi/linux/serio.h
+++ b/include/uapi/linux/serio.h
@@ -77,5 +77,6 @@
 #define SERIO_PS2MULT	0x3c
 #define SERIO_TSC40	0x3d
 #define SERIO_WACOM_IV	0x3e
+#define SERIO_EGALAX	0x3f
 
 #endif /* _UAPI_SERIO_H */
diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
index 013c9d8db372..dc652e224b67 100644
--- a/include/uapi/linux/uinput.h
+++ b/include/uapi/linux/uinput.h
@@ -20,6 +20,11 @@
  * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
  *
  * Changes/Revisions:
+ *	0.5	08/13/2015 (David Herrmann <dh.herrmann@gmail.com> &
+ *			    Benjamin Tissoires <benjamin.tissoires@redhat.com>)
+ *		- add UI_DEV_SETUP ioctl
+ *		- add UI_ABS_SETUP ioctl
+ *		- add UI_GET_VERSION ioctl
  *	0.4	01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>)
  *		- add UI_GET_SYSNAME ioctl
  *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
@@ -37,8 +42,8 @@
 #include <linux/types.h>
 #include <linux/input.h>
 
-#define UINPUT_VERSION		4
-
+#define UINPUT_VERSION		5
+#define UINPUT_MAX_NAME_SIZE	80
 
 struct uinput_ff_upload {
 	__u32			request_id;
@@ -58,6 +63,76 @@ struct uinput_ff_erase {
 #define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
 #define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
 
+struct uinput_setup {
+	struct input_id id;
+	char name[UINPUT_MAX_NAME_SIZE];
+	__u32 ff_effects_max;
+};
+
+/**
+ * UI_DEV_SETUP - Set device parameters for setup
+ *
+ * This ioctl sets parameters for the input device to be created.  It
+ * supersedes the old "struct uinput_user_dev" method, which wrote this data
+ * via write(). To actually set the absolute axes UI_ABS_SETUP should be
+ * used.
+ *
+ * The ioctl takes a "struct uinput_setup" object as argument. The fields of
+ * this object are as follows:
+ *              id: See the description of "struct input_id". This field is
+ *                  copied unchanged into the new device.
+ *            name: This is used unchanged as name for the new device.
+ *  ff_effects_max: This limits the maximum numbers of force-feedback effects.
+ *                  See below for a description of FF with uinput.
+ *
+ * This ioctl can be called multiple times and will overwrite previous values.
+ * If this ioctl fails with -EINVAL, it is recommended to use the old
+ * "uinput_user_dev" method via write() as a fallback, in case you run on an
+ * old kernel that does not support this ioctl.
+ *
+ * This ioctl may fail with -EINVAL if it is not supported or if you passed
+ * incorrect values, -ENOMEM if the kernel runs out of memory or -EFAULT if the
+ * passed uinput_setup object cannot be read/written.
+ * If this call fails, partial data may have already been applied to the
+ * internal device.
+ */
+#define UI_DEV_SETUP _IOW(UINPUT_IOCTL_BASE, 3, struct uinput_setup)
+
+struct uinput_abs_setup {
+	__u16  code; /* axis code */
+	/* __u16 filler; */
+	struct input_absinfo absinfo;
+};
+
+/**
+ * UI_ABS_SETUP - Set absolute axis information for the device to setup
+ *
+ * This ioctl sets one absolute axis information for the input device to be
+ * created. It supersedes the old "struct uinput_user_dev" method, which wrote
+ * part of this data and the content of UI_DEV_SETUP via write().
+ *
+ * The ioctl takes a "struct uinput_abs_setup" object as argument. The fields
+ * of this object are as follows:
+ *            code: The corresponding input code associated with this axis
+ *                  (ABS_X, ABS_Y, etc...)
+ *         absinfo: See "struct input_absinfo" for a description of this field.
+ *                  This field is copied unchanged into the kernel for the
+ *                  specified axis. If the axis is not enabled via
+ *                  UI_SET_ABSBIT, this ioctl will enable it.
+ *
+ * This ioctl can be called multiple times and will overwrite previous values.
+ * If this ioctl fails with -EINVAL, it is recommended to use the old
+ * "uinput_user_dev" method via write() as a fallback, in case you run on an
+ * old kernel that does not support this ioctl.
+ *
+ * This ioctl may fail with -EINVAL if it is not supported or if you passed
+ * incorrect values, -ENOMEM if the kernel runs out of memory or -EFAULT if the
+ * passed uinput_setup object cannot be read/written.
+ * If this call fails, partial data may have already been applied to the
+ * internal device.
+ */
+#define UI_ABS_SETUP _IOW(UINPUT_IOCTL_BASE, 4, struct uinput_abs_setup)
+
 #define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
 #define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
 #define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
@@ -144,7 +219,6 @@ struct uinput_ff_erase {
 #define UI_FF_UPLOAD		1
 #define UI_FF_ERASE		2
 
-#define UINPUT_MAX_NAME_SIZE	80
 struct uinput_user_dev {
 	char name[UINPUT_MAX_NAME_SIZE];
 	struct input_id id;