diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2022-11-22 22:14:31 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2022-11-22 22:14:39 +0100 |
| commit | a6eeafba1141c48b0b38e96f1aa715de4035b6d5 (patch) | |
| tree | da56435f1d3900e61736288789209b48f46812fa /include/soc | |
| parent | 2a26daeeb851522ff6fbee1cdab700fdedfafa1f (diff) | |
| parent | 198d4649b0b813bc9fc1605cfb843b6624518f92 (diff) | |
Merge tag 'tegra-for-6.2-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.2-rc1
This adds new BPMP ABI so that newer features can be enabled.
Furthermore, the BPMP driver is updated to use iosys-map helpers to
allow working with shared memory regions that are located in system
memory.
Apart from that, several minor cleanups are included.
* tag 'tegra-for-6.2-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Remove surplus dev_err() when using platform_get_irq_byname()
firmware: tegra: Update BPMP ABI
firmware: tegra: bpmp: Do not support big-endian
firmware: tegra: bpmp: Use iosys-map helpers
firmware: tegra: bpmp: Prefer u32 over uint32_t
Link: https://lore.kernel.org/r/20221121171239.2041835-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'include/soc')
| -rw-r--r-- | include/soc/tegra/bpmp-abi.h | 1796 | ||||
| -rw-r--r-- | include/soc/tegra/bpmp.h | 17 | ||||
| -rw-r--r-- | include/soc/tegra/ivc.h | 11 |
3 files changed, 1375 insertions, 449 deletions
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h index 53171e324d1c..ecefcaec7e66 100644 --- a/include/soc/tegra/bpmp-abi.h +++ b/include/soc/tegra/bpmp-abi.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved. */ #ifndef ABI_BPMP_ABI_H @@ -74,6 +74,32 @@ /** * @ingroup MRQ_Format + * Request an answer from the peer. + * This should be set in mrq_request::flags for all requests targetted + * at BPMP. For requests originating in BPMP, this flag is optional except + * for messages targeting MCE, for which the field must be set. + * When this flag is not set, the remote peer must not send a response + * back. + */ +#define BPMP_MAIL_DO_ACK (1U << 0U) + +/** + * @ingroup MRQ_Format + * Ring the sender's doorbell when responding. This should be set unless + * the sender wants to poll the underlying communications layer directly. + * + * An optional direction that can be specified in mrq_request::flags. + */ +#define BPMP_MAIL_RING_DB (1U << 1U) + +/** + * @ingroup MRQ_Format + * CRC present + */ +#define BPMP_MAIL_CRC_PRESENT (1U << 2U) + +/** + * @ingroup MRQ_Format * @brief Header for an MRQ message * * Provides the MRQ number for the MRQ message: #mrq. The remainder of @@ -85,12 +111,139 @@ struct mrq_request { uint32_t mrq; /** - * @brief Flags providing follow up directions to the receiver + * @brief 32bit word containing a number of fields as follows: + * + * struct { + * uint8_t options:4; + * uint8_t xid:4; + * uint8_t payload_length; + * uint16_t crc16; + * }; + * + * **options** directions to the receiver and indicates CRC presence. + * + * #BPMP_MAIL_DO_ACK and #BPMP_MAIL_RING_DB see documentation of respective options. + * #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms. It indicates the + * crc16, xid and length fields are present when set. + * Some platform configurations, especially when targeted to applications requiring + * functional safety, mandate this option being set or otherwise will respond with + * -BPMP_EBADMSG and ignore the request. + * + * **xid** is a transaction ID. + * + * Only used when #BPMP_MAIL_CRC_PRESENT is set. + * + * **payload_length** of the message expressed in bytes without the size of this header. + * See table below for minimum accepted payload lengths for each MRQ. + * Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes + * rather than bytes. + * + * Only used when #BPMP_MAIL_CRC_PRESENT is set. + * + * | MRQ | CMD | minimum payload length + * | -------------------- | ------------------------------------ | ------------------------------------------ | + * | MRQ_PING | | 4 | + * | MRQ_THREADED_PING | | 4 | + * | MRQ_RESET | any | 8 | + * | MRQ_I2C | | 12 + cmd_i2c_xfer_request.data_size | + * | MRQ_CLK | CMD_CLK_GET_RATE | 4 | + * | MRQ_CLK | CMD_CLK_SET_RATE | 16 | + * | MRQ_CLK | CMD_CLK_ROUND_RATE | 16 | + * | MRQ_CLK | CMD_CLK_GET_PARENT | 4 | + * | MRQ_CLK | CMD_CLK_SET_PARENT | 8 | + * | MRQ_CLK | CMD_CLK_ENABLE | 4 | + * | MRQ_CLK | CMD_CLK_DISABLE | 4 | + * | MRQ_CLK | CMD_CLK_IS_ENABLED | 4 | + * | MRQ_CLK | CMD_CLK_GET_ALL_INFO | 4 | + * | MRQ_CLK | CMD_CLK_GET_MAX_CLK_ID | 4 | + * | MRQ_CLK | CMD_CLK_GET_FMAX_AT_VMIN | 4 | + * | MRQ_QUERY_ABI | | 4 | + * | MRQ_PG | CMD_PG_QUERY_ABI | 12 | + * | MRQ_PG | CMD_PG_SET_STATE | 12 | + * | MRQ_PG | CMD_PG_GET_STATE | 8 | + * | MRQ_PG | CMD_PG_GET_NAME | 8 | + * | MRQ_PG | CMD_PG_GET_MAX_ID | 8 | + * | MRQ_THERMAL | CMD_THERMAL_QUERY_ABI | 8 | + * | MRQ_THERMAL | CMD_THERMAL_GET_TEMP | 8 | + * | MRQ_THERMAL | CMD_THERMAL_SET_TRIP | 20 | + * | MRQ_THERMAL | CMD_THERMAL_GET_NUM_ZONES | 4 | + * | MRQ_THERMAL | CMD_THERMAL_GET_THERMTRIP | 8 | + * | MRQ_CPU_VHINT | | 8 | + * | MRQ_ABI_RATCHET | | 2 | + * | MRQ_EMC_DVFS_LATENCY | | 8 | + * | MRQ_EMC_DVFS_EMCHUB | | 8 | + * | MRQ_EMC_DISP_RFL | | 4 | + * | MRQ_BWMGR | CMD_BWMGR_QUERY_ABI | 8 | + * | MRQ_BWMGR | CMD_BWMGR_CALC_RATE | 8 + 8 * bwmgr_rate_req.num_iso_clients | + * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_QUERY_ABI | 8 | + * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_CALCULATE_LA | 16 | + * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_SET_LA | 16 | + * | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_GET_MAX_BW | 8 | + * | MRQ_CPU_NDIV_LIMITS | | 4 | + * | MRQ_CPU_AUTO_CC3 | | 4 | + * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 | + * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_READ | 5 | + * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len | + * | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_GET_FIFO | 4 | + * | MRQ_STRAP | STRAP_SET | 12 | + * | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 | + * | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 | + * | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 | + * | MRQ_UPHY | CMD_UPHY_PCIE_CONTROLLER_STATE | 6 | + * | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 | + * | MRQ_FMON | CMD_FMON_GEAR_CLAMP | 16 | + * | MRQ_FMON | CMD_FMON_GEAR_FREE | 4 | + * | MRQ_FMON | CMD_FMON_GEAR_GET | 4 | + * | MRQ_FMON | CMD_FMON_FAULT_STS_GET | 8 | + * | MRQ_EC | CMD_EC_STATUS_EX_GET | 12 | + * | MRQ_QUERY_FW_TAG | | 0 | + * | MRQ_DEBUG | CMD_DEBUG_OPEN_RO | 4 + length of cmd_debug_fopen_request.name | + * | MRQ_DEBUG | CMD_DEBUG_OPEN_WO | 4 + length of cmd_debug_fopen_request.name | + * | MRQ_DEBUG | CMD_DEBUG_READ | 8 | + * | MRQ_DEBUG | CMD_DEBUG_WRITE | 12 + cmd_debug_fwrite_request.datalen | + * | MRQ_DEBUG | CMD_DEBUG_CLOSE | 8 | + * | MRQ_TELEMETRY | | 8 | + * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_QUERY_ABI | 8 | + * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_SET | 20 | + * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_GET | 16 | + * | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_CURR_CAP | 8 | + * | MRQ_GEARS | | 0 | + * | MRQ_BWMGR_INT | CMD_BWMGR_INT_QUERY_ABI | 8 | + * | MRQ_BWMGR_INT | CMD_BWMGR_INT_CALC_AND_SET | 16 | + * | MRQ_BWMGR_INT | CMD_BWMGR_INT_CAP_SET | 8 | + * | MRQ_OC_STATUS | | 0 | + * + * **crc16** + * + * CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1 + * and initialization value 0x4657. The CRC is calculated over all bytes of the message + * including this header. However the crc16 field is considered to be set to 0 when + * calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set. If + * #BPMP_MAIL_CRC_PRESENT is set and this field does not match the CRC as + * calculated by BPMP, -BPMP_EBADMSG will be returned and the request will + * be ignored. See code snippet below on how to calculate the CRC. * - * | Bit | Description | - * |-----|--------------------------------------------| - * | 1 | ring the sender's doorbell when responding | - * | 0 | should be 1 | + * @code + * uint16_t calc_crc_digest(uint16_t crc, uint8_t *data, size_t size) + * { + * for (size_t i = 0; i < size; i++) { + * crc ^= data[i] << 8; + * for (size_t j = 0; j < 8; j++) { + * if ((crc & 0x8000) == 0x8000) { + * crc = (crc << 1) ^ 0xAC9A; + * } else { + * crc = (crc << 1); + * } + * } + * } + * return crc; + * } + * + * uint16_t calc_crc(uint8_t *data, size_t size) + * { + * return calc_crc_digest(0x4657, data, size); + * } + * @endcode */ uint32_t flags; } BPMP_ABI_PACKED; @@ -107,7 +260,35 @@ struct mrq_request { struct mrq_response { /** @brief Error code for the MRQ request itself */ int32_t err; - /** @brief Reserved for future use */ + + /** + * @brief 32bit word containing a number of fields as follows: + * + * struct { + * uint8_t options:4; + * uint8_t xid:4; + * uint8_t payload_length; + * uint16_t crc16; + * }; + * + * **options** indicates CRC presence. + * + * #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms and + * indicates the crc16 related fields are present when set. + * + * **xid** is the transaction ID as sent by the requestor. + * + * **length** of the message expressed in bytes without the size of this header. + * Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes + * rather than bytes. + * + * **crc16** + * + * CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1 + * and initialization value 0x4657. The CRC is calculated over all bytes of the message + * including this header. However the crc16 field is considered to be set to 0 when + * calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set. + */ uint32_t flags; } BPMP_ABI_PACKED; @@ -131,24 +312,16 @@ struct mrq_response { #define MRQ_PING 0U #define MRQ_QUERY_TAG 1U -#define MRQ_MODULE_LOAD 4U -#define MRQ_MODULE_UNLOAD 5U -#define MRQ_TRACE_MODIFY 7U -#define MRQ_WRITE_TRACE 8U #define MRQ_THREADED_PING 9U -#define MRQ_MODULE_MAIL 11U #define MRQ_DEBUGFS 19U #define MRQ_RESET 20U #define MRQ_I2C 21U #define MRQ_CLK 22U #define MRQ_QUERY_ABI 23U -#define MRQ_PG_READ_STATE 25U -#define MRQ_PG_UPDATE_STATE 26U #define MRQ_THERMAL 27U #define MRQ_CPU_VHINT 28U #define MRQ_ABI_RATCHET 29U #define MRQ_EMC_DVFS_LATENCY 31U -#define MRQ_TRACE_ITER 64U #define MRQ_RINGBUF_CONSOLE 65U #define MRQ_PG 66U #define MRQ_CPU_NDIV_LIMITS 67U @@ -159,6 +332,40 @@ struct mrq_response { #define MRQ_FMON 72U #define MRQ_EC 73U #define MRQ_DEBUG 75U +#define MRQ_EMC_DVFS_EMCHUB 76U +#define MRQ_BWMGR 77U +#define MRQ_ISO_CLIENT 78U +#define MRQ_EMC_DISP_RFL 79U +#define MRQ_TELEMETRY 80U +#define MRQ_PWR_LIMIT 81U +#define MRQ_GEARS 82U +#define MRQ_BWMGR_INT 83U +#define MRQ_OC_STATUS 84U + +/** @cond DEPRECATED */ +#define MRQ_RESERVED_2 2U +#define MRQ_RESERVED_3 3U +#define MRQ_RESERVED_4 4U +#define MRQ_RESERVED_5 5U +#define MRQ_RESERVED_6 6U +#define MRQ_RESERVED_7 7U +#define MRQ_RESERVED_8 8U +#define MRQ_RESERVED_10 10U +#define MRQ_RESERVED_11 11U +#define MRQ_RESERVED_12 12U +#define MRQ_RESERVED_13 13U +#define MRQ_RESERVED_14 14U +#define MRQ_RESERVED_15 15U +#define MRQ_RESERVED_16 16U +#define MRQ_RESERVED_17 17U +#define MRQ_RESERVED_18 18U +#define MRQ_RESERVED_24 24U +#define MRQ_RESERVED_25 25U +#define MRQ_RESERVED_26 26U +#define MRQ_RESERVED_30 30U +#define MRQ_RESERVED_64 64U +#define MRQ_RESERVED_74 74U +/** @endcond DEPRECATED */ /** @} */ @@ -167,7 +374,7 @@ struct mrq_response { * @brief Maximum MRQ code to be sent by CPU software to * BPMP. Subject to change in future */ -#define MAX_CPU_MRQ_ID 75U +#define MAX_CPU_MRQ_ID 84U /** * @addtogroup MRQ_Payloads @@ -183,8 +390,11 @@ struct mrq_response { * @defgroup ABI_info ABI Info * @defgroup Powergating Power Gating * @defgroup Thermal Thermal + * @defgroup OC_status OC status * @defgroup Vhint CPU Voltage hint * @defgroup EMC EMC + * @defgroup BWMGR BWMGR + * @defgroup ISO_CLIENT ISO_CLIENT * @defgroup CPU NDIV Limits * @defgroup RingbufConsole Ring Buffer Console * @defgroup Strap Straps @@ -192,8 +402,11 @@ struct mrq_response { * @defgroup CC3 Auto-CC3 * @defgroup FMON FMON * @defgroup EC EC - * @defgroup Fbvolt_status Fuse Burn Voltage Status - * @} + * @defgroup Telemetry Telemetry + * @defgroup Pwrlimit PWR_LIMIT + * @defgroup Gears Gears + * @defgroup BWMGR_INT Bandwidth Manager Integrated + * @} MRQ_Payloads */ /** @@ -304,190 +517,6 @@ struct mrq_query_fw_tag_response { uint8_t tag[32]; } BPMP_ABI_PACKED; -/** - * @ingroup MRQ_Codes - * @def MRQ_MODULE_LOAD - * @brief Dynamically load a BPMP code module - * - * * Platforms: T210, T210B01, T186 - * @cond (bpmp_t210 || bpmp_t210b01 || bpmp_t186) - * * Initiators: CCPLEX - * * Targets: BPMP - * * Request Payload: @ref mrq_module_load_request - * * Response Payload: @ref mrq_module_load_response - * - * @note This MRQ is disabled on production systems - * - */ - -/** - * @ingroup Module - * @brief Request with #MRQ_MODULE_LOAD - * - * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically - * load the code located at #phys_addr and having size #size - * bytes. #phys_addr is treated as a void pointer. - * - * The recipient copies the code from #phys_addr to locally allocated - * memory prior to responding to this message. - * - * @todo document the module header format - * - * The sender is responsible for ensuring that the code is mapped in - * the recipient's address map. - * - */ -struct mrq_module_load_request { - /** @brief Base address of the code to load */ - uint32_t phys_addr; - /** @brief Size in bytes of code to load */ - uint32_t size; -} BPMP_ABI_PACKED; - -/** - * @ingroup Module - * @brief Response to #MRQ_MODULE_LOAD - * - * @todo document mrq_response::err - */ -struct mrq_module_load_response { - /** @brief Handle to the loaded module */ - uint32_t base; -} BPMP_ABI_PACKED; -/** @endcond*/ - -/** - * @ingroup MRQ_Codes - * @def MRQ_MODULE_UNLOAD - * @brief Unload a previously loaded code module - * - * * Platforms: T210, T210B01, T186 - * @cond (bpmp_t210 || bpmp_t210b01 || bpmp_t186) - * * Initiators: CCPLEX - * * Targets: BPMP - * * Request Payload: @ref mrq_module_unload_request - * * Response Payload: N/A - * - * @note This MRQ is disabled on production systems - */ - -/** - * @ingroup Module - * @brief Request with #MRQ_MODULE_UNLOAD - * - * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded - * module be unloaded. - */ -struct mrq_module_unload_request { - /** @brief Handle of the module to unload */ - uint32_t base; -} BPMP_ABI_PACKED; -/** @endcond*/ - -/** - * @ingroup MRQ_Codes - * @def MRQ_TRACE_MODIFY - * @brief Modify the set of enabled trace events - * - * @deprecated - * - * * Platforms: All - * * Initiators: CCPLEX - * * Targets: BPMP - * * Request Payload: @ref mrq_trace_modify_request - * * Response Payload: @ref mrq_trace_modify_response - * - * @note This MRQ is disabled on production systems - */ - -/** - * @ingroup Trace - * @brief Request with #MRQ_TRACE_MODIFY - * - * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace - * events. #set takes precedence for any bit set in both #set and - * #clr. - */ -struct mrq_trace_modify_request { - /** @brief Bit mask of trace events to disable */ - uint32_t clr; - /** @brief Bit mask of trace events to enable */ - uint32_t set; -} BPMP_ABI_PACKED; - -/** - * @ingroup Trace - * @brief Response to #MRQ_TRACE_MODIFY - * - * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the - * state of which events are enabled after the recipient acted on the - * message. - * - */ -struct mrq_trace_modify_response { - /** @brief Bit mask of trace event enable states */ - uint32_t mask; -} BPMP_ABI_PACKED; - -/** - * @ingroup MRQ_Codes - * @def MRQ_WRITE_TRACE - * @brief Write trace data to a buffer - * - * @deprecated - * - * * Platforms: All - * * Initiators: CCPLEX - * * Targets: BPMP - * * Request Payload: @ref mrq_write_trace_request - * * Response Payload: @ref mrq_write_trace_response - * - * mrq_response::err depends on the @ref mrq_write_trace_request field - * values. err is -#BPMP_EINVAL if size is zero or area is NULL or - * area is in an illegal range. A positive value for err indicates the - * number of bytes written to area. - * - * @note This MRQ is disabled on production systems - */ - -/** - * @ingroup Trace - * @brief Request with #MRQ_WRITE_TRACE - * - * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace - * data from the recipient's local buffer to the output buffer. #area - * is treated as a byte-aligned pointer in the recipient's address - * space. - * - * The sender is responsible for ensuring that the output - * buffer is mapped in the recipient's address map. The recipient is - * responsible for protecting its own code and data from accidental - * overwrites. - */ -struct mrq_write_trace_request { - /** @brief Base address of output buffer */ - uint32_t area; - /** @brief Size in bytes of the output buffer */ - uint32_t size; -} BPMP_ABI_PACKED; - -/** - * @ingroup Trace - * @brief Response to #MRQ_WRITE_TRACE - * - * Once this response is sent, the respondent will not access the - * output buffer further. - */ -struct mrq_write_trace_response { - /** - * @brief Flag whether more data remains in local buffer - * - * Value is 1 if the entire local trace buffer has been - * drained to the outputbuffer. Value is 0 otherwise. - */ - uint32_t eof; -} BPMP_ABI_PACKED; - /** @private */ struct mrq_threaded_ping_request { uint32_t challenge; @@ -500,50 +529,6 @@ struct mrq_threaded_ping_response { /** * @ingroup MRQ_Codes - * @def MRQ_MODULE_MAIL - * @brief Send a message to a loadable module - * - * * Platforms: T210, T210B01, T186 - * @cond (bpmp_t210 || bpmp_t210b01 || bpmp_t186) - * * Initiators: Any - * * Targets: BPMP - * * Request Payload: @ref mrq_module_mail_request - * * Response Payload: @ref mrq_module_mail_response - * - * @note This MRQ is disabled on production systems - */ - -/** - * @ingroup Module - * @brief Request with #MRQ_MODULE_MAIL - */ -struct mrq_module_mail_request { - /** @brief Handle to the previously loaded module */ - uint32_t base; - /** @brief Module-specific mail payload - * - * The length of data[ ] is unknown to the BPMP core firmware - * but it is limited to the size of an IPC message. - */ - uint8_t data[BPMP_ABI_EMPTY_ARRAY]; -} BPMP_ABI_PACKED; - -/** - * @ingroup Module - * @brief Response to #MRQ_MODULE_MAIL - */ -struct mrq_module_mail_response { - /** @brief Module-specific mail payload - * - * The length of data[ ] is unknown to the BPMP core firmware - * but it is limited to the size of an IPC message. - */ - uint8_t data[BPMP_ABI_EMPTY_ARRAY]; -} BPMP_ABI_PACKED; -/** @endcond */ - -/** - * @ingroup MRQ_Codes * @def MRQ_DEBUGFS * @brief Interact with BPMP's debugfs file nodes * @@ -686,7 +671,7 @@ struct mrq_debugfs_response { #define DEBUGFS_S_ISDIR (1 << 9) #define DEBUGFS_S_IRUSR (1 << 8) #define DEBUGFS_S_IWUSR (1 << 7) -/** @} */ +/** @} Debugfs */ /** * @ingroup MRQ_Codes @@ -931,7 +916,7 @@ enum mrq_reset_commands { * @brief Request with MRQ_RESET * * Used by the sender of an #MRQ_RESET message to request BPMP to - * assert or deassert a given reset line. + * assert or or deassert a given reset line. */ struct mrq_reset_request { /** @brief Reset action to perform (@ref mrq_reset_commands) */ @@ -970,7 +955,7 @@ struct mrq_reset_response { } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ +/** @} Reset */ /** * @ingroup MRQ_Codes @@ -1032,7 +1017,17 @@ struct serial_i2c_request { * @brief Trigger one or more i2c transactions */ struct cmd_i2c_xfer_request { - /** @brief Valid bus number from @ref bpmp_i2c_ids*/ + /** + * @brief Tegra PWR_I2C bus identifier + * + * @cond (bpmp_t234 || bpmp_t239 || bpmp_t194) + * Must be set to 5. + * @endcond (bpmp_t234 || bpmp_t239 || bpmp_t194) + * @cond bpmp_th500 + * Must be set to 1. + * @endcond bpmp_th500 + * + */ uint32_t bus_id; /** @brief Count of valid bytes in #data_buf*/ @@ -1084,7 +1079,7 @@ struct mrq_i2c_response { struct cmd_i2c_xfer_response xfer; } BPMP_ABI_PACKED; -/** @} */ +/** @} I2C */ /** * @ingroup MRQ_Codes @@ -1109,6 +1104,13 @@ enum { CMD_CLK_IS_ENABLED = 6, CMD_CLK_ENABLE = 7, CMD_CLK_DISABLE = 8, +/** @cond DEPRECATED */ + CMD_CLK_PROPERTIES = 9, + CMD_CLK_POSSIBLE_PARENTS = 10, + CMD_CLK_NUM_POSSIBLE_PARENTS = 11, + CMD_CLK_GET_POSSIBLE_PARENT = 12, + CMD_CLK_RESET_REFCOUNTS = 13, +/** @endcond DEPRECATED */ CMD_CLK_GET_ALL_INFO = 14, CMD_CLK_GET_MAX_CLK_ID = 15, CMD_CLK_GET_FMAX_AT_VMIN = 16, @@ -1119,6 +1121,21 @@ enum { #define BPMP_CLK_HAS_SET_RATE (1U << 1U) #define BPMP_CLK_IS_ROOT (1U << 2U) #define BPMP_CLK_IS_VAR_ROOT (1U << 3U) +/** + * @brief Protection against rate and parent changes + * + * #MRQ_CLK command #CMD_CLK_SET_RATE or #MRQ_CLK command #CMD_CLK_SET_PARENT will return + * -#BPMP_EACCES. + */ +#define BPMP_CLK_RATE_PARENT_CHANGE_DENIED (1U << 30) + +/** + * @brief Protection against state changes + * + * #MRQ_CLK command #CMD_CLK_ENABLE or #MRQ_CLK command #CMD_CLK_DISABLE will return + * -#BPMP_EACCES. + */ +#define BPMP_CLK_STATE_CHANGE_DENIED (1U << 31) #define MRQ_CLK_NAME_MAXLEN 40U #define MRQ_CLK_MAX_PARENTS 16U @@ -1210,6 +1227,46 @@ struct cmd_clk_disable_response { BPMP_ABI_EMPTY } BPMP_ABI_PACKED; +/** @cond DEPRECATED */ +/** @private */ +struct cmd_clk_properties_request { + BPMP_ABI_EMPTY +} BPMP_ABI_PACKED; + +/** @todo flags need to be spelled out here */ +struct cmd_clk_properties_response { + uint32_t flags; +} BPMP_ABI_PACKED; + +/** @private */ +struct cmd_clk_possible_parents_request { + BPMP_ABI_EMPTY +} BPMP_ABI_PACKED; + +struct cmd_clk_possible_parents_response { + uint8_t num_parents; + uint8_t reserved[3]; + uint32_t parent_id[MRQ_CLK_MAX_PARENTS]; +} BPMP_ABI_PACKED; + +/** @private */ +struct cmd_clk_num_possible_parents_request { + BPMP_ABI_EMPTY +} BPMP_ABI_PACKED; + +struct cmd_clk_num_possible_parents_response { + uint8_t num_parents; +} BPMP_ABI_PACKED; + +struct cmd_clk_get_possible_parent_request { + uint8_t parent_idx; +} BPMP_ABI_PACKED; + +struct cmd_clk_get_possible_parent_response { + uint32_t parent_id; +} BPMP_ABI_PACKED; +/** @endcond DEPRECATED */ + /** @private */ struct cmd_clk_get_all_info_request { BPMP_ABI_EMPTY @@ -1241,6 +1298,7 @@ struct cmd_clk_get_fmax_at_vmin_response { int64_t rate; } BPMP_ABI_PACKED; + /** * @ingroup Clocks * @brief Request with #MRQ_CLK @@ -1267,6 +1325,17 @@ struct cmd_clk_get_fmax_at_vmin_response { * */ +/** @cond DEPRECATED + * + * Older versions of firmware also supported following sub-commands: + * |CMD_CLK_PROPERTIES |- | + * |CMD_CLK_POSSIBLE_PARENTS |- | + * |CMD_CLK_NUM_POSSIBLE_PARENTS|- | + * |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parent| + * |CMD_CLK_RESET_REFCOUNTS |- | + * + * @endcond DEPRECATED */ + struct mrq_clk_request { /** @brief Sub-command and clock id concatenated to 32-bit word. * - bits[31..24] is the sub-cmd. @@ -1288,6 +1357,15 @@ struct mrq_clk_request { struct cmd_clk_disable_request clk_disable; /** @private */ struct cmd_clk_is_enabled_request clk_is_enabled; + /** @cond DEPRECATED */ + /** @private */ + struct cmd_clk_properties_request clk_properties; + /** @private */ + struct cmd_clk_possible_parents_request clk_possible_parents; + /** @private */ + struct cmd_clk_num_possible_parents_request clk_num_possible_parents; + struct cmd_clk_get_possible_parent_request clk_get_possible_parent; + /** @endcond DEPRECATED */ /** @private */ struct cmd_clk_get_all_info_request clk_get_all_info; /** @private */ @@ -1321,6 +1399,17 @@ struct mrq_clk_request { * */ +/** @cond DEPRECATED + * + * Older versions of firmware also supported following sub-commands: + * |CMD_CLK_PROPERTIES |clk_properties | + * |CMD_CLK_POSSIBLE_PARENTS |clk_possible_parents | + * |CMD_CLK_NUM_POSSIBLE_PARENTS|clk_num_possible_parents| + * |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parents| + * |CMD_CLK_RESET_REFCOUNTS |- | + * + * @endcond DEPRECATED */ + struct mrq_clk_response { union { struct cmd_clk_get_rate_response clk_get_rate; @@ -1333,13 +1422,19 @@ struct mrq_clk_response { /** @private */ struct cmd_clk_disable_response clk_disable; struct cmd_clk_is_enabled_response clk_is_enabled; + /** @cond DEPRECATED */ + struct cmd_clk_properties_response clk_properties; + struct cmd_clk_possible_parents_response clk_possible_parents; + struct cmd_clk_num_possible_parents_response clk_num_possible_parents; + struct cmd_clk_get_possible_parent_response clk_get_possible_parent; + /** @endcond DEPRECATED */ struct cmd_clk_get_all_info_response clk_get_all_info; struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id; struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin; } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ +/** @} Clocks */ /** * @ingroup MRQ_Codes @@ -1378,107 +1473,20 @@ struct mrq_query_abi_response { } BPMP_ABI_PACKED; /** - * @ingroup MRQ_Codes - * @def MRQ_PG_READ_STATE - * @brief Read the power-gating state of a partition * - * * Platforms: T186 - * @cond bpmp_t186 - * * Initiators: Any - * * Targets: BPMP - * * Request Payload: @ref mrq_pg_read_state_request - * * Response Payload: @ref mrq_pg_read_state_response - */ - -/** - * @ingroup Powergating - * @brief Request with #MRQ_PG_READ_STATE - * - * Used by MRQ_PG_READ_STATE call to read the current state of a - * partition. - */ -struct mrq_pg_read_state_request { - /** @brief ID of partition */ - uint32_t partition_id; -} BPMP_ABI_PACKED; - -/** - * @ingroup Powergating - * @brief Response to MRQ_PG_READ_STATE - * @todo define possible errors. - */ -struct mrq_pg_read_state_response { - /** @brief Read as don't care */ - uint32_t sram_state; - /** @brief State of power partition - * * 0 : off - * * 1 : on - */ - uint32_t logic_state; -} BPMP_ABI_PACKED; -/** @endcond*/ -/** @} */ - -/** - * @ingroup MRQ_Codes - * @def MRQ_PG_UPDATE_STATE - * @brief Modify the power-gating state of a partition. In contrast to - * MRQ_PG calls, the operations that change state (on/off) of power - * partition are reference counted. - * - * * Platforms: T186 - * @cond bpmp_t186 - * * Initiators: Any - * * Targets: BPMP - * * Request Payload: @ref mrq_pg_update_state_request - * * Response Payload: N/A - */ - -/** - * @ingroup Powergating - * @brief Request with mrq_pg_update_state_request - * - * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the - * state of a power partition #partition_id. - */ -struct mrq_pg_update_state_request { - /** @brief ID of partition */ - uint32_t partition_id; - /** @brief Secondary control of power partition - * @details Ignored by many versions of the BPMP - * firmware. For maximum compatibility, set the value - * according to @ref logic_state - * * 0x1: power ON partition (@ref logic_state == 0x3) - * * 0x3: power OFF partition (@ref logic_state == 0x1) - */ - uint32_t sram_state; - /** @brief Controls state of power partition, legal values are - * * 0x1 : power OFF partition - * * 0x3 : power ON partition - */ - uint32_t logic_state; - /** @brief Change state of clocks of the power partition, legal values - * * 0x0 : do not change clock state - * * 0x1 : disable partition clocks (only applicable when - * @ref logic_state == 0x1) - * * 0x3 : enable partition clocks (only applicable when - * @ref logic_state == 0x3) - */ - uint32_t clock_state; -} BPMP_ABI_PACKED; -/** @endcond*/ - -/** * @ingroup MRQ_Codes * @def MRQ_PG * @brief Control power-gating state of a partition. In contrast to * MRQ_PG_UPDATE_STATE, operations that change the power partition * state are NOT reference counted * - * @note BPMP-FW forcefully turns off some partitions as part of SC7 entry - * because their state cannot be adequately restored on exit. Therefore, - * it is recommended to power off all domains via MRQ_PG prior to SC7 entry. + * @cond (bpmp_t194 || bpmp_t186) + * @note On T194 and earlier BPMP-FW forcefully turns off some partitions as + * part of SC7 entry because their state cannot be adequately restored on exit. + * Therefore, it is recommended to power off all domains via MRQ_PG prior to SC7 + * entry. * See @ref bpmp_pdomain_ids for further detail. + * @endcond (bpmp_t194 || bpmp_t186) * * * Platforms: T186, T194 * * Initiators: Any @@ -1643,7 +1651,7 @@ struct mrq_pg_response { } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ +/** @} Powergating */ /** * @ingroup MRQ_Codes @@ -1889,7 +1897,44 @@ union mrq_thermal_bpmp_to_host_response { struct cmd_thermal_get_thermtrip_response get_thermtrip; struct cmd_thermal_get_num_zones_response get_num_zones; } BPMP_ABI_PACKED; -/** @} */ + +/** @} Thermal */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_OC_STATUS + * @brief Query over current status + * + * * Platforms: T234 + * @cond bpmp_t234 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_oc_status_response + * + * @addtogroup OC_status + * @{ + */ + +#define OC_STATUS_MAX_SIZE 24U + +/* + * @brief Response to #MRQ_OC_STATUS + * + * throt_en: Value for each OC alarm where zero signifies throttle is + * disabled, and non-zero throttle is enabled. + * event_cnt: Total number of OC events for each OC alarm. + * + * mrq_response::err is 0 if the operation was successful and + * -#BPMP_ENODEV otherwise. + */ +struct mrq_oc_status_response { + uint8_t throt_en[OC_STATUS_MAX_SIZE]; + uint32_t event_cnt[OC_STATUS_MAX_SIZE]; +} BPMP_ABI_PACKED; + +/** @} OC_status */ +/** @endcond bpmp_t234 */ /** * @ingroup MRQ_Codes @@ -1948,8 +1993,9 @@ struct cpu_vhint_data { /** reserved for future use */ uint16_t reserved[328]; } BPMP_ABI_PACKED; -/** @endcond */ -/** @} */ + +/** @} Vhint */ +/** @endcond bpmp_t186 */ /** * @ingroup MRQ_Codes @@ -2016,14 +2062,15 @@ struct mrq_abi_ratchet_response { /** @brief BPMP's ratchet value */ uint16_t ratchet; }; -/** @} */ + +/** @} ABI_info */ /** * @ingroup MRQ_Codes * @def MRQ_EMC_DVFS_LATENCY * @brief Query frequency dependent EMC DVFS latency * - * * Platforms: T186, T194 + * * Platforms: T186, T194, T234 * * Initiators: CCPLEX * * Targets: BPMP * * Request Payload: N/A @@ -2053,7 +2100,543 @@ struct mrq_emc_dvfs_latency_response { struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE]; } BPMP_ABI_PACKED; -/** @} */ +/** @} EMC */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_EMC_DVFS_EMCHUB + * @brief Query EMC HUB frequencies + * + * * Platforms: T234 onwards + * @cond (bpmp_t234 || bpmp_t239 || bpmp_th500) + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_emc_dvfs_emchub_response + * @addtogroup EMC + * @{ + */ + +/** + * @brief Used by @ref mrq_emc_dvfs_emchub_response + */ +struct emc_dvfs_emchub { + /** @brief EMC DVFS node frequency in kHz */ + uint32_t freq; + /** @brief EMC HUB frequency in kHz */ + uint32_t hub_freq; +} BPMP_ABI_PACKED; + +#define EMC_DVFS_EMCHUB_MAX_SIZE EMC_DVFS_LATENCY_MAX_SIZE +/** + * @brief Response to #MRQ_EMC_DVFS_EMCHUB + */ +struct mrq_emc_dvfs_emchub_response { + /** @brief The number valid entries in #pairs */ + uint32_t num_pairs; + /** @brief EMC DVFS node <frequency, hub frequency> information */ + struct emc_dvfs_emchub pairs[EMC_DVFS_EMCHUB_MAX_SIZE]; +} BPMP_ABI_PACKED; + +/** @} EMC */ +/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_EMC_DISP_RFL + * @brief Set EMC display RFL handshake mode of operations + * + * * Platforms: T234 onwards + * @cond (bpmp_t234 || bpmp_t239 || bpmp_th500) + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_emc_disp_rfl_request + * * Response Payload: N/A + * + * @addtogroup EMC + * @{ + */ + +enum mrq_emc_disp_rfl_mode { + /** @brief EMC display RFL handshake disabled */ + EMC_DISP_RFL_MODE_DISABLED = 0, + /** @brief EMC display RFL handshake enabled */ + EMC_DISP_RFL_MODE_ENABLED = 1, +}; + +/** + * @ingroup EMC + * @brief Request with #MRQ_EMC_DISP_RFL + * + * Used by the sender of an #MRQ_EMC_DISP_RFL message to + * request the mode of EMC display RFL handshake. + * + * mrq_response::err is + * * 0: RFL mode is set successfully + * * -#BPMP_EINVAL: invalid mode requested + * * -#BPMP_ENOSYS: RFL handshake is not supported + * * -#BPMP_EACCES: Permission denied + * * -#BPMP_ENODEV: if disp rfl mrq is not supported by BPMP-FW + */ +struct mrq_emc_disp_rfl_request { + /** @brief EMC display RFL mode (@ref mrq_emc_disp_rfl_mode) */ + uint32_t mode; +} BPMP_ABI_PACKED; + +/** @} EMC */ +/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_BWMGR + * @brief bwmgr requests + * + * * Platforms: T234 onwards + * @cond (bpmp_t234 || bpmp_t239 || bpmp_th500) + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_bwmgr_request + * * Response Payload: @ref mrq_bwmgr_response + * + * @addtogroup BWMGR + * + * @{ + */ + +enum mrq_bwmgr_cmd { + /** + * @brief Check whether the BPMP driver supports the specified + * request type + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_BWMGR_QUERY_ABI = 0, + + /** + * @brief Determine dram rate to satisfy iso/niso bw requests + * + * mrq_response::err is + * * 0: calc_rate succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_ENOTSUP: Requested bw is not available. + */ + CMD_BWMGR_CALC_RATE = 1 +}; + +/* + * request data for request type CMD_BWMGR_QUERY_ABI + * + * type: Request type for which to check existence. + */ +struct cmd_bwmgr_query_abi_request { + uint32_t type; +} BPMP_ABI_PACKED; + +/** + * @brief Used by @ref cmd_bwmgr_calc_rate_request + */ +struct iso_req { + /* @brief bwmgr client ID @ref bpmp_bwmgr_ids */ + uint32_t id; + /* @brief bw in kBps requested by client */ + uint32_t iso_bw; +} BPMP_ABI_PACKED; + +#define MAX_ISO_CLIENTS 13U +/* + * request data for request type CMD_BWMGR_CALC_RATE + */ +struct cmd_bwmgr_calc_rate_request { + /* @brief total bw in kBps requested by all niso clients */ + uint32_t sum_niso_bw; + /* @brief The number of iso clients */ + uint32_t num_iso_clients; + /* @brief iso_req <id, iso_bw> information */ + struct iso_req isobw_reqs[MAX_ISO_CLIENTS]; +} BPMP_ABI_PACKED; + +/* + * response data for request type CMD_BWMGR_CALC_RATE + * + * iso_rate_min: min dram data clk rate in kHz to satisfy all iso bw reqs + * total_rate_min: min dram data clk rate in kHz to satisfy all bw reqs + */ +struct cmd_bwmgr_calc_rate_response { + uint32_t iso_rate_min; + uint32_t total_rate_min; +} BPMP_ABI_PACKED; + +/* + * @brief Request with #MRQ_BWMGR + * + * + * |sub-command |payload | + * |----------------------------|------------------------------| + * |CMD_BWMGR_QUERY_ABI | cmd_bwmgr_query_abi_request | + * |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_request | + * + */ +struct mrq_bwmgr_request { + uint32_t cmd; + union { + struct cmd_bwmgr_query_abi_request query_abi; + struct cmd_bwmgr_calc_rate_request bwmgr_rate_req; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/* + * @brief Response to MRQ_BWMGR + * + * |sub-command |payload | + * |----------------------------|------------------------------| + * |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_response | + */ +struct mrq_bwmgr_response { + union { + struct cmd_bwmgr_calc_rate_response bwmgr_rate_resp; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** @} BWMGR */ +/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_BWMGR_INT + * @brief bpmp-integrated bwmgr requests + * + * * Platforms: T234 onwards + * @cond (bpmp_t234 || bpmp_t239 || bpmp_th500) + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_bwmgr_int_request + * * Response Payload: @ref mrq_bwmgr_int_response + * + * @addtogroup BWMGR_INT + * @{ + */ + +enum mrq_bwmgr_int_cmd { + /** + * @brief Check whether the BPMP-FW supports the specified + * request type + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_BWMGR_INT_QUERY_ABI = 1, + + /** + * @brief Determine and set dram rate to satisfy iso/niso bw request + * + * mrq_response::err is + * * 0: request succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * set_frequency in @ref cmd_bwmgr_int_calc_and_set_response + * will not be set. + * * -#BPMP_ENOTSUP: Requested bw is not available. + * set_frequency in @ref cmd_bwmgr_int_calc_and_set_response + * will be current dram-clk rate. + */ + CMD_BWMGR_INT_CALC_AND_SET = 2, + + /** + * @brief Set a max DRAM frequency for the bandwidth-manager + * + * mrq_response::err is + * * 0: request succeeded. + * * -#BPMP_ENOTSUP: Requested cap frequency is not possible. + */ + CMD_BWMGR_INT_CAP_SET = 3 +}; + +/* + * request structure for request type CMD_BWMGR_QUERY_ABI + * + * type: Request type for which to check existence. + */ +struct cmd_bwmgr_int_query_abi_request { + /* @brief request type determined by @ref mrq_bwmgr_int_cmd */ + uint32_t type; +} BPMP_ABI_PACKED; + +/** + * @defgroup bwmgr_int_unit_type BWMGR_INT floor unit-types + * @addtogroup bwmgr_int_unit_type + * @{ + */ +/** @brief kilobytes per second unit-type */ +#define BWMGR_INT_UNIT_KBPS 0U +/** @brief kilohertz unit-type */ +#define BWMGR_INT_UNIT_KHZ 1U + +/** @} bwmgr_int_unit_type */ + +/* + * request data for request type CMD_BWMGR_INT_CALC_AND_SET + */ +struct cmd_bwmgr_int_calc_and_set_request { + /* @brief bwmgr client ID @ref bpmp_bwmgr_ids */ + uint32_t client_id; + /* @brief average niso bw usage in kBps requested by client. */ + uint32_t niso_bw; + /* + * @brief average iso bw usage in kBps requested by client. + * Value is ignored if client is niso. Determined by client_id. + */ + uint32_t iso_bw; + /* + * @brief memory clock floor requested by client. + * Unit determined by floor_unit. + */ + uint32_t mc_floor; + /* + * @brief toggle to determine the unit-type of floor value. + * See @ref bwmgr_int_unit_type definitions for unit-type mappings. + */ + uint8_t floor_unit; +} BPMP_ABI_PACKED; + +struct cmd_bwmgr_int_cap_set_request { + /* @brief requested cap frequency in Hz. */ + uint64_t rate; +} BPMP_ABI_PACKED; + +/* + * response data for request type CMD_BWMGR_CALC_AND_SET + */ +struct cmd_bwmgr_int_calc_and_set_response { + /* @brief current set memory clock frequency in Hz */ + uint64_t rate; +} BPMP_ABI_PACKED; + +/* + * @brief Request with #MRQ_BWMGR_INT + * + * + * |sub-command |payload | + * |----------------------------|-----------------------------------| + * |CMD_BWMGR_INT_QUERY_ABI | cmd_bwmgr_int_query_abi_request | + * |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_request| + * |CMD_BWMGR_INT_CAP_SET | cmd_bwmgr_int_cap_set_request | + * + */ +struct mrq_bwmgr_int_request { + uint32_t cmd; + union { + struct cmd_bwmgr_int_query_abi_request query_abi; + struct cmd_bwmgr_int_calc_and_set_request bwmgr_calc_set_req; + struct cmd_bwmgr_int_cap_set_request bwmgr_cap_set_req; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/* + * @brief Response to MRQ_BWMGR_INT + * + * |sub-command |payload | + * |----------------------------|---------------------------------------| + * |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_response | + */ +struct mrq_bwmgr_int_response { + union { + struct cmd_bwmgr_int_calc_and_set_response bwmgr_calc_set_resp; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** @} BWMGR_INT */ +/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_ISO_CLIENT + * @brief ISO client requests + * + * * Platforms: T234 onwards + * @cond (bpmp_t234 || bpmp_t239 || bpmp_th500) + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_iso_client_request + * * Response Payload: @ref mrq_iso_client_response + * + * @addtogroup ISO_CLIENT + * @{ + */ + +enum mrq_iso_client_cmd { + /** + * @brief Check whether the BPMP driver supports the specified + * request type + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_ISO_CLIENT_QUERY_ABI = 0, + + /* + * @brief check for legal LA for the iso client. Without programming + * LA MC registers, calculate and ensure that legal LA is possible for + * iso bw requested by the ISO client. + * + * mrq_response::err is + * * 0: check la succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_EFAULT: Legal LA is not possible for client requested iso_bw + */ + CMD_ISO_CLIENT_CALCULATE_LA = 1, + + /* + * @brief set LA for the iso client. Calculate and program the LA/PTSA + * MC registers corresponding to the client making bw request + * + * mrq_response::err is + * * 0: set la succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_EFAULT: Failed to calculate or program MC registers. + */ + CMD_ISO_CLIENT_SET_LA = 2, + + /* + * @brief Get max possible bw for iso client + * + * mrq_response::err is + * * 0: get_max_bw succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + */ + CMD_ISO_CLIENT_GET_MAX_BW = 3 +}; + +/* + * request data for request type CMD_ISO_CLIENT_QUERY_ABI + * + * type: Request type for which to check existence. + */ +struct cmd_iso_client_query_abi_request { + uint32_t type; +} BPMP_ABI_PACKED; + +/* + * request data for request type CMD_ISO_CLIENT_CALCULATE_LA + * + * id: client ID in @ref bpmp_bwmgr_ids + * bw: bw requested in kBps by client ID. + * init_bw_floor: initial dram_bw_floor in kBps passed by client ID. + * ISO client will perform mempool allocation and DVFS buffering based + * on this dram_bw_floor. + */ +struct cmd_iso_client_calculate_la_request { + uint32_t id; + uint32_t bw; + uint32_t init_bw_floor; +} BPMP_ABI_PACKED; + +/* + * request data for request type CMD_ISO_CLIENT_SET_LA + * + * id: client ID in @ref bpmp_bwmgr_ids + * bw: bw requested in kBps by client ID. + * final_bw_floor: final dram_bw_floor in kBps. + * Sometimes the initial dram_bw_floor passed by ISO client may need to be + * updated by considering higher dram freq's. This is the final dram_bw_floor + * used to calculate and program MC registers. + */ +struct cmd_iso_client_set_la_request { + uint32_t id; + uint32_t bw; + uint32_t final_bw_floor; +} BPMP_ABI_PACKED; + +/* + * request data for request type CMD_ISO_CLIENT_GET_MAX_BW + * + * id: client ID in @ref bpmp_bwmgr_ids + */ +struct cmd_iso_client_get_max_bw_request { + uint32_t id; +} BPMP_ABI_PACKED; + +/* + * response data for request type CMD_ISO_CLIENT_CALCULATE_LA + * + * la_rate_floor: minimum dram_rate_floor in kHz at which a legal la is possible + * iso_client_only_rate: Minimum dram freq in kHz required to satisfy this clients + * iso bw request, assuming all other iso clients are inactive + */ +struct cmd_iso_client_calculate_la_response { + uint32_t la_rate_floor; + uint32_t iso_client_only_rate; +} BPMP_ABI_PACKED; + +/** + * @brief Used by @ref cmd_iso_client_get_max_bw_response + */ +struct iso_max_bw { + /* @brief dram frequency in kHz */ + uint32_t freq; + /* @brief max possible iso-bw in kBps */ + uint32_t iso_bw; +} BPMP_ABI_PACKED; + +#define ISO_MAX_BW_MAX_SIZE 14U +/* + * response data for request type CMD_ISO_CLIENT_GET_MAX_BW + */ +struct cmd_iso_client_get_max_bw_response { + /* @brief The number valid entries in iso_max_bw pairs */ + uint32_t num_pairs; + /* @brief max ISOBW <dram freq, max bw> information */ + struct iso_max_bw pairs[ISO_MAX_BW_MAX_SIZE]; +} BPMP_ABI_PACKED; + +/** + * @brief Request with #MRQ_ISO_CLIENT + * + * Used by the sender of an #MRQ_ISO_CLIENT message. + * + * |sub-command |payload | + * |------------------------------------ |----------------------------------------| + * |CMD_ISO_CLIENT_QUERY_ABI |cmd_iso_client_query_abi_request | + * |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_request | + * |CMD_ISO_CLIENT_SET_LA |cmd_iso_client_set_la_request | + * |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_request | + * + */ + +struct mrq_iso_client_request { + /* Type of request. Values listed in enum mrq_iso_client_cmd */ + uint32_t cmd; + union { + struct cmd_iso_client_query_abi_request query_abi; + struct cmd_iso_client_calculate_la_request calculate_la_req; + struct cmd_iso_client_set_la_request set_la_req; + struct cmd_iso_client_get_max_bw_request max_isobw_req; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** + * @brief Response to MRQ_ISO_CLIENT + * + * Each sub-command supported by @ref mrq_iso_client_request may return + * sub-command-specific data. Some do and some do not as indicated in + * the following table + * + * |sub-command |payload | + * |---------------------------- |------------------------------------| + * |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_response| + * |CMD_ISO_CLIENT_SET_LA |N/A | + * |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_response | + * + */ + +struct mrq_iso_client_response { + union { + struct cmd_iso_client_calculate_la_response calculate_la_resp; + struct cmd_iso_client_get_max_bw_response max_isobw_resp; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** @} ISO_CLIENT */ +/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */ /** * @ingroup MRQ_Codes @@ -2061,7 +2644,7 @@ struct mrq_emc_dvfs_latency_response { * @brief CPU freq. limits in ndiv * * * Platforms: T194 onwards - * @cond bpmp_t194 + * @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) * * Initiators: CCPLEX * * Targets: BPMP * * Request Payload: @ref mrq_cpu_ndiv_limits_request @@ -2094,15 +2677,15 @@ struct mrq_cpu_ndiv_limits_response { uint16_t ndiv_min; } BPMP_ABI_PACKED; -/** @} */ -/** @endcond */ +/** @} CPU */ +/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */ /** * @ingroup MRQ_Codes * @def MRQ_CPU_AUTO_CC3 * @brief Query CPU cluster auto-CC3 configuration * - * * Platforms: T194 onwards + * * Platforms: T194 * @cond bpmp_t194 * * Initiators: CCPLEX * * Targets: BPMP @@ -2140,40 +2723,8 @@ struct mrq_cpu_auto_cc3_response { uint32_t auto_cc3_config; } BPMP_ABI_PACKED; -/** @} */ -/** @endcond */ - -/** - * @ingroup MRQ_Codes - * @def MRQ_TRACE_ITER - * @brief Manage the trace iterator - * - * @deprecated - * - * * Platforms: All - * * Initiators: CCPLEX - * * Targets: BPMP - * * Request Payload: N/A - * * Response Payload: @ref mrq_trace_iter_request - * @addtogroup Trace - * @{ - */ -enum { - /** @brief (re)start the tracing now. Ignore older events */ - TRACE_ITER_INIT = 0, - /** @brief Clobber all events in the trace buffer */ - TRACE_ITER_CLEAN = 1 -}; - -/** - * @brief Request with #MRQ_TRACE_ITER - */ -struct mrq_trace_iter_request { - /** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */ - uint32_t cmd; -} BPMP_ABI_PACKED; - -/** @} */ +/** @} CC3 */ +/** @endcond bpmp_t194 */ /** * @ingroup MRQ_Codes @@ -2351,7 +2902,8 @@ union mrq_ringbuf_console_bpmp_to_host_response { struct cmd_ringbuf_console_write_resp write; struct cmd_ringbuf_console_get_fifo_resp get_fifo; } BPMP_ABI_PACKED; -/** @} */ + +/** @} RingbufConsole */ /** * @ingroup MRQ_Codes @@ -2359,7 +2911,7 @@ union mrq_ringbuf_console_bpmp_to_host_response { * @brief Set a strap value controlled by BPMP * * * Platforms: T194 onwards - * @cond bpmp_t194 + * @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) * * Initiators: CCPLEX * * Targets: BPMP * * Request Payload: @ref mrq_strap_request @@ -2390,17 +2942,14 @@ enum mrq_strap_cmd { struct mrq_strap_request { /** @brief @ref mrq_strap_cmd */ uint32_t cmd; - /** @brief Strap ID from @ref Strap_Ids */ + /** @brief Strap ID from @ref Strap_Identifiers */ uint32_t id; /** @brief Desired value for strap (if cmd is #STRAP_SET) */ uint32_t value; } BPMP_ABI_PACKED; -/** - * @defgroup Strap_Ids Strap Identifiers - * @} - */ -/** @endcond */ +/** @} Strap */ +/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */ /** * @ingroup MRQ_Codes @@ -2408,7 +2957,7 @@ struct mrq_strap_request { * @brief Perform a UPHY operation * * * Platforms: T194 onwards - * @cond bpmp_t194 + * @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) * * Initiators: CCPLEX * * Targets: BPMP * * Request Payload: @ref mrq_uphy_request @@ -2423,6 +2972,9 @@ enum { CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3, CMD_UPHY_PCIE_CONTROLLER_STATE = 4, CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF = 5, + CMD_UPHY_DISPLAY_PORT_INIT = 6, + CMD_UPHY_DISPLAY_PORT_OFF = 7, + CMD_UPHY_XUSB_DYN_LANES_RESTORE = 8, CMD_UPHY_MAX, }; @@ -2445,28 +2997,41 @@ struct cmd_uphy_margin_status_response { } BPMP_ABI_PACKED; struct cmd_uphy_ep_controller_pll_init_request { - /** @brief EP controller number, valid: 0, 4, 5 */ + /** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T239 valid: 0 */ uint8_t ep_controller; } BPMP_ABI_PACKED; struct cmd_uphy_pcie_controller_state_request { - /** @brief PCIE controller number, valid: 0, 1, 2, 3, 4 */ + /** @brief PCIE controller number, T194 valid: 0-4; T234 valid: 0-10; T239 valid: 0-3 */ uint8_t pcie_controller; uint8_t enable; } BPMP_ABI_PACKED; struct cmd_uphy_ep_controller_pll_off_request { - /** @brief EP controller number, valid: 0, 4, 5 */ + /** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T239 valid: 0 */ uint8_t ep_controller; } BPMP_ABI_PACKED; +struct cmd_uphy_display_port_init_request { + /** @brief DisplayPort link rate, T239 valid: 1620, 2700, 5400, 8100, 2160, 2430, 3240, 4320, 6750 */ + uint16_t link_rate; + /** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */ + uint16_t lanes_bitmap; +} BPMP_ABI_PACKED; + +struct cmd_uphy_xusb_dyn_lanes_restore_request { + /** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */ + uint16_t lanes_bitmap; +} BPMP_ABI_PACKED; + /** * @ingroup UPHY * @brief Request with #MRQ_UPHY * - * Used by the sender of an #MRQ_UPHY message to control UPHY Lane RX margining. - * The uphy_request is split into several sub-commands. Some sub-commands - * require no additional data. Others have a sub-command specific payload + * Used by the sender of an #MRQ_UPHY message to control UPHY. + * The uphy_request is split into several sub-commands. CMD_UPHY_PCIE_LANE_MARGIN_STATUS + * requires no additional data. Others have a sub-command specific payload. Below table + * shows sub-commands with their corresponding payload data. * * |sub-command |payload | * |------------------------------------ |----------------------------------------| @@ -2475,6 +3040,9 @@ struct cmd_uphy_ep_controller_pll_off_request { * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request | * |CMD_UPHY_PCIE_CONTROLLER_STATE |cmd_uphy_pcie_controller_state_request | * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF |cmd_uphy_ep_controller_pll_off_request | + * |CMD_UPHY_PCIE_DISPLAY_PORT_INIT |cmd_uphy_display_port_init_request | + * |CMD_UPHY_PCIE_DISPLAY_PORT_OFF | | + * |CMD_UPHY_XUSB_DYN_LANES_RESTORE |cmd_uphy_xusb_dyn_lanes_restore_request | * */ @@ -2489,6 +3057,8 @@ struct mrq_uphy_request { struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init; struct cmd_uphy_pcie_controller_state_request controller_state; struct cmd_uphy_ep_controller_pll_off_request ep_ctrlr_pll_off; + struct cmd_uphy_display_port_init_request display_port_init; + struct cmd_uphy_xusb_dyn_lanes_restore_request xusb_dyn_lanes_restore; } BPMP_UNION_ANON; } BPMP_ABI_PACKED; @@ -2513,8 +3083,8 @@ struct mrq_uphy_response { } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ -/** @endcond */ +/** @} UPHY */ +/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */ /** * @ingroup MRQ_Codes @@ -2522,14 +3092,16 @@ struct mrq_uphy_response { * @brief Perform a frequency monitor configuration operations * * * Platforms: T194 onwards - * @cond bpmp_t194 + * @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) * * Initiators: CCPLEX * * Targets: BPMP * * Request Payload: @ref mrq_fmon_request * * Response Payload: @ref mrq_fmon_response + * @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) * * @addtogroup FMON * @{ + * @cond (bpmp_t194 || bpmp_t234) */ enum { /** @@ -2538,6 +3110,20 @@ enum { * The monitored clock must be running for clamp to succeed. If * clamped, FMON configuration is preserved when clock rate * and/or state is changed. + * + * mrq_response::err is 0 if the operation was successful, or @n + * -#BPMP_EACCES: FMON access error @n + * -#BPMP_EBADCMD if subcommand is not supported @n + * -#BPMP_EBADSLT: clamp FMON on cluster with auto-CC3 enabled @n + * -#BPMP_EBUSY: fmon is already clamped at different rate @n + * -#BPMP_EFAULT: self-diagnostic error @n + * -#BPMP_EINVAL: invalid FMON configuration @n + * -#BPMP_EOPNOTSUPP: not in production mode @n + * -#BPMP_ENODEV: invalid clk_id @n + * -#BPMP_ENOENT: no calibration data, uninitialized @n + * -#BPMP_ENOTSUP: avfs config not set @n + * -#BPMP_ENOSYS: clamp FMON on cluster clock w/ no NAFLL @n + * -#BPMP_ETIMEDOUT: operation timed out @n */ CMD_FMON_GEAR_CLAMP = 1, /** @@ -2545,6 +3131,13 @@ enum { * * Allow FMON configuration to follow monitored clock rate * and/or state changes. + * + * mrq_response::err is 0 if the operation was successful, or @n + * -#BPMP_EBADCMD if subcommand is not supported @n + * -#BPMP_ENODEV: invalid clk_id @n + * -#BPMP_ENOENT: no calibration data, uninitialized @n + * -#BPMP_ENOTSUP: avfs config not set @n + * -#BPMP_EOPNOTSUPP: not in production mode @n */ CMD_FMON_GEAR_FREE = 2, /** @@ -2553,11 +3146,54 @@ enum { * * Inherently racy, since clamp state can be changed * concurrently. Useful for testing. + * + * mrq_response::err is 0 if the operation was successful, or @n + * -#BPMP_EBADCMD if subcommand is not supported @n + * -#BPMP_ENODEV: invalid clk_id @n + * -#BPMP_ENOENT: no calibration data, uninitialized @n + * -#BPMP_ENOTSUP: avfs config not set @n + * -#BPMP_EOPNOTSUPP: not in production mode @n */ CMD_FMON_GEAR_GET = 3, - CMD_FMON_NUM, + /** + * @brief Return current status of FMON faults detected by FMON + * h/w or s/w since last invocation of this command. + * Clears fault status. + * + * mrq_response::err is 0 if the operation was successful, or @n + * -#BPMP_EBADCMD if subcommand is not supported @n + * -#BPMP_EINVAL: invalid fault type @n + * -#BPMP_ENODEV: invalid clk_id @n + * -#BPMP_ENOENT: no calibration data, uninitialized @n + * -#BPMP_ENOTSUP: avfs config not set @n + * -#BPMP_EOPNOTSUPP: not in production mode @n + */ + CMD_FMON_FAULT_STS_GET = 4, }; +/** + * @cond DEPRECATED + * Kept for backward compatibility + */ +#define CMD_FMON_NUM 4 + +/** @endcond DEPRECATED */ + +/** + * @defgroup fmon_fault_type FMON fault type + * @addtogroup fmon_fault_type + * @{ + */ +/** @brief All detected FMON faults (h/w or s/w) */ +#define FMON_FAULT_TYPE_ALL 0U +/** @brief FMON faults detected by h/w */ +#define FMON_FAULT_TYPE_HW 1U +/** @brief FMON faults detected by s/w */ +#define FMON_FAULT_TYPE_SW 2U + +/** @} fmon_fault_type */ + + struct cmd_fmon_gear_clamp_request { int32_t unused; int64_t rate; @@ -2587,6 +3223,14 @@ struct cmd_fmon_gear_get_response { int64_t rate; } BPMP_ABI_PACKED; +struct cmd_fmon_fault_sts_get_request { + uint32_t fault_type; /**< @ref fmon_fault_type */ +} BPMP_ABI_PACKED; + +struct cmd_fmon_fault_sts_get_response { + uint32_t fault_sts; +} BPMP_ABI_PACKED; + /** * @ingroup FMON * @brief Request with #MRQ_FMON @@ -2601,9 +3245,9 @@ struct cmd_fmon_gear_get_response { * |CMD_FMON_GEAR_CLAMP |fmon_gear_clamp | * |CMD_FMON_GEAR_FREE |- | * |CMD_FMON_GEAR_GET |- | + * |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get | * */ - struct mrq_fmon_request { /** @brief Sub-command and clock id concatenated to 32-bit word. * - bits[31..24] is the sub-cmd. @@ -2618,6 +3262,7 @@ struct mrq_fmon_request { struct cmd_fmon_gear_free_request fmon_gear_free; /** @private */ struct cmd_fmon_gear_get_request fmon_gear_get; + struct cmd_fmon_fault_sts_get_request fmon_fault_sts_get; } BPMP_UNION_ANON; } BPMP_ABI_PACKED; @@ -2633,6 +3278,7 @@ struct mrq_fmon_request { * |CMD_FMON_GEAR_CLAMP |- | * |CMD_FMON_GEAR_FREE |- | * |CMD_FMON_GEAR_GET |fmon_gear_get | + * |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get | * */ @@ -2643,11 +3289,12 @@ struct mrq_fmon_response { /** @private */ struct cmd_fmon_gear_free_response fmon_gear_free; struct cmd_fmon_gear_get_response fmon_gear_get; + struct cmd_fmon_fault_sts_get_response fmon_fault_sts_get; } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ -/** @endcond */ +/** @endcond (bpmp_t194 || bpmp_t234) */ +/** @} FMON */ /** * @ingroup MRQ_Codes @@ -2655,7 +3302,7 @@ struct mrq_fmon_response { * @brief Provide status information on faults reported by Error * Collator (EC) to HSM. * - * * Platforms: T194 onwards + * * Platforms: T194 * @cond bpmp_t194 * * Initiators: CCPLEX * * Targets: BPMP @@ -2664,8 +3311,10 @@ struct mrq_fmon_response { * * @note This MRQ ABI is under construction, and subject to change * + * @endcond bpmp_t194 * @addtogroup EC * @{ + * @cond bpmp_t194 */ enum { /** @@ -2676,7 +3325,7 @@ enum { * -#BPMP_ENODEV if target EC is not owned by BPMP @n * -#BPMP_EACCES if target EC power domain is turned off @n * -#BPMP_EBADCMD if subcommand is not supported - * @endcond + * @endcond DEPRECATED */ CMD_EC_STATUS_GET = 1, /* deprecated */ @@ -2787,7 +3436,8 @@ enum ec_registers_group { #define EC_STATUS_FLAG_LAST_ERROR 0x0002U /** @brief EC latent error flag */ #define EC_STATUS_FLAG_LATENT_ERROR 0x0004U -/** @} */ + +/** @} bpmp_ec_status_flags */ /** * @defgroup bpmp_ec_desc_flags EC Descriptor Flags @@ -2798,7 +3448,8 @@ enum ec_registers_group { #define EC_DESC_FLAG_RESOLVED 0x0001U /** @brief EC descriptor failed to retrieve id flag */ #define EC_DESC_FLAG_NO_ID 0x0002U -/** @} */ + +/** @} bpmp_ec_desc_flags */ /** * |error type | fmon_clk_id values | @@ -2810,14 +3461,18 @@ struct ec_err_fmon_desc { uint16_t desc_flags; /** @brief FMON monitored clock id */ uint16_t fmon_clk_id; - /** @brief Bitmask of @ref bpmp_fmon_faults_flags */ + /** + * @brief Bitmask of fault flags + * + * @ref bpmp_fmon_faults_flags + */ uint32_t fmon_faults; /** @brief FMON faults access error */ int32_t fmon_access_error; } BPMP_ABI_PACKED; /** - * |error type | vmon_adc_id values | + * | error type | vmon_adc_id values | * |---------------------------------|---------------------------| * |@ref EC_ERR_TYPE_VOLTAGE_MONITOR |@ref bpmp_adc_ids | */ @@ -2826,16 +3481,16 @@ struct ec_err_vmon_desc { uint16_t desc_flags; /** @brief VMON rail adc id */ uint16_t vmon_adc_id; - /** @brief Bitmask of @ref bpmp_vmon_faults_flags */ + /** @brief Bitmask of bpmp_vmon_faults_flags */ uint32_t vmon_faults; /** @brief VMON faults access error */ int32_t vmon_access_error; } BPMP_ABI_PACKED; /** - * |error type | reg_id values | - * |---------------------------------|---------------------------| - * |@ref EC_ERR_TYPE_REGISTER_PARITY |@ref bpmp_ec_registers_ids | + * |error type | reg_id values | + * |---------------------------------|-----------------------| + * |@ref EC_ERR_TYPE_REGISTER_PARITY | bpmp_ec_registers_ids | */ struct ec_err_reg_parity_desc { /** @brief Bitmask of @ref bpmp_ec_desc_flags */ @@ -2847,10 +3502,10 @@ struct ec_err_reg_parity_desc { } BPMP_ABI_PACKED; /** - * |error type | err_source_id values | - * |--------------------------------- |--------------------------| - * |@ref EC_ERR_TYPE_SW_CORRECTABLE | @ref bpmp_ec_ce_swd_ids | - * |@ref EC_ERR_TYPE_SW_UNCORRECTABLE | @ref bpmp_ec_ue_swd_ids | + * |error type | err_source_id values | + * |--------------------------------- |----------------------| + * |@ref EC_ERR_TYPE_SW_CORRECTABLE | bpmp_ec_ce_swd_ids | + * |@ref EC_ERR_TYPE_SW_UNCORRECTABLE | bpmp_ec_ue_swd_ids | */ struct ec_err_sw_error_desc { /** @brief Bitmask of @ref bpmp_ec_desc_flags */ @@ -2862,15 +3517,15 @@ struct ec_err_sw_error_desc { } BPMP_ABI_PACKED; /** - * |error type | err_source_id values | - * |----------------------------------------|---------------------------| - * |@ref EC_ERR_TYPE_PARITY_INTERNAL |@ref bpmp_ec_ipath_ids | - * |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL |@ref bpmp_ec_ipath_ids | - * |@ref EC_ERR_TYPE_ECC_DED_INTERNAL |@ref bpmp_ec_ipath_ids | - * |@ref EC_ERR_TYPE_COMPARATOR |@ref bpmp_ec_comparator_ids| - * |@ref EC_ERR_TYPE_PARITY_SRAM |@ref bpmp_clock_ids | - * |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE |@ref bpmp_ec_misc_hwd_ids | - * |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE |@ref bpmp_ec_misc_hwd_ids | + * |error type | err_source_id values | + * |----------------------------------------|------------------------| + * |@ref EC_ERR_TYPE_PARITY_INTERNAL | bpmp_ec_ipath_ids | + * |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL | bpmp_ec_ipath_ids | + * |@ref EC_ERR_TYPE_ECC_DED_INTERNAL | bpmp_ec_ipath_ids | + * |@ref EC_ERR_TYPE_COMPARATOR | bpmp_ec_comparator_ids| + * |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE | bpmp_ec_misc_hwd_ids | + * |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE | bpmp_ec_misc_hwd_ids | + * |@ref EC_ERR_TYPE_PARITY_SRAM | bpmp_clock_ids | */ struct ec_err_simple_desc { /** @brief Bitmask of @ref bpmp_ec_desc_flags */ @@ -2917,7 +3572,7 @@ struct cmd_ec_status_get_response { /** @brief EC error descriptors */ union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM]; } BPMP_ABI_PACKED; -/** @endcond */ +/** @endcond DEPRECATED */ struct cmd_ec_status_ex_get_response { /** @brief Target EC id (the same id received with request). */ @@ -2955,7 +3610,7 @@ struct cmd_ec_status_ex_get_response { * |sub-command |payload | * |----------------------------|-----------------------| * |@ref CMD_EC_STATUS_GET |ec_status_get | - * @endcond + * @endcond DEPRECATED * * |sub-command |payload | * |----------------------------|-----------------------| @@ -2983,7 +3638,7 @@ struct mrq_ec_request { * |sub-command |payload | * |----------------------------|------------------------| * |@ref CMD_EC_STATUS_GET |ec_status_get | - * @endcond + * @endcond DEPRECATED * * |sub-command |payload | * |----------------------------|------------------------| @@ -2997,13 +3652,264 @@ struct mrq_ec_response { * @cond DEPRECATED */ struct cmd_ec_status_get_response ec_status_get; - /** @endcond */ + /** @endcond DEPRECATED */ struct cmd_ec_status_ex_get_response ec_status_ex_get; } BPMP_UNION_ANON; } BPMP_ABI_PACKED; -/** @} */ -/** @endcond */ +/** @endcond bpmp_t194 */ +/** @} EC */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_TELEMETRY + * @brief Get address of memory buffer refreshed with recently sampled + * telemetry data + * + * * Platforms: TH500 onwards + * @cond bpmp_th500 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_telemetry_response + * @addtogroup Telemetry + * @{ + */ + +/** + * @brief Response to #MRQ_TELEMETRY + * + * mrq_response::err is + * * 0: Telemetry data is available at returned address + * * -#BPMP_EACCES: MRQ master is not allowed to request buffer refresh + * * -#BPMP_ENAVAIL: Telemetry buffer cannot be refreshed via this MRQ channel + * * -#BPMP_ENOTSUP: Telemetry buffer is not supported by BPMP-FW + * * -#BPMP_ENODEV: Telemetry mrq is not supported by BPMP-FW + */ +struct mrq_telemetry_response { + /** @brief Physical address of telemetry data buffer */ + uint64_t data_buf_addr; /**< see @ref bpmp_telemetry_layout */ +} BPMP_ABI_PACKED; + +/** @} Telemetry */ +/** @endcond bpmp_th500 */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_PWR_LIMIT + * @brief Control power limits. + * + * * Platforms: TH500 onwards + * @cond bpmp_th500 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pwr_limit_request + * * Response Payload: @ref mrq_pwr_limit_response + * + * @addtogroup Pwrlimit + * @{ + */ +enum mrq_pwr_limit_cmd { + /** + * @brief Check whether the BPMP-FW supports the specified + * command + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_PWR_LIMIT_QUERY_ABI = 0, + + /** + * @brief Set power limit + * + * mrq_response:err is + * * 0: Success + * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW + * * -#BPMP_ENAVAIL: Invalid request parameters + * * -#BPMP_EACCES: Request is not accepted + */ + CMD_PWR_LIMIT_SET = 1, + + /** + * @brief Get power limit setting + * + * mrq_response:err is + * * 0: Success + * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW + * * -#BPMP_ENAVAIL: Invalid request parameters + */ + CMD_PWR_LIMIT_GET = 2, + + /** + * @brief Get current power cap + * + * mrq_response:err is + * * 0: Success + * * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW + * * -#BPMP_ENAVAIL: Invalid request parameters + */ + CMD_PWR_LIMIT_CURR_CAP = 3, +}; + +/** + * @defgroup bpmp_pwr_limit_type PWR_LIMIT TYPEs + * @{ + */ +/** @brief Limit value specifies traget cap */ +#define PWR_LIMIT_TYPE_TARGET_CAP 0U +/** @brief Limit value specifies maximum possible target cap */ +#define PWR_LIMIT_TYPE_BOUND_MAX 1U +/** @brief Limit value specifies minimum possible target cap */ +#define PWR_LIMIT_TYPE_BOUND_MIN 2U +/** @brief Number of limit types supported by mrq interface */ +#define PWR_LIMIT_TYPE_NUM 3U + +/** @} bpmp_pwr_limit_type */ + +/** + * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_QUERY_ABI + */ +struct cmd_pwr_limit_query_abi_request { + uint32_t cmd_code; /**< @ref mrq_pwr_limit_cmd */ +} BPMP_ABI_PACKED; + +/** + * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_SET + * + * Set specified limit of specified type from specified source. The success of + * the request means that specified value is accepted as input to arbitration + * with other sources settings for the same limit of the same type. Zero limit + * is ignored by the arbitration (i.e., indicates "no limit set"). + */ +struct cmd_pwr_limit_set_request { + uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */ + uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */ + uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */ + uint32_t limit_setting; +} BPMP_ABI_PACKED; + +/** + * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET + * + * Get previously set from specified source specified limit value of specified + * type. + */ +struct cmd_pwr_limit_get_request { + uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */ + uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */ + uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */ +} BPMP_ABI_PACKED; + +/** + * @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET + */ +struct cmd_pwr_limit_get_response { + uint32_t limit_setting; +} BPMP_ABI_PACKED; + +/** + * @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP + * + * For specified limit get current power cap aggregated from all sources. + */ +struct cmd_pwr_limit_curr_cap_request { + uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */ +} BPMP_ABI_PACKED; + +/** + * @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP + */ +struct cmd_pwr_limit_curr_cap_response { + uint32_t curr_cap; +} BPMP_ABI_PACKED; + +/** + * @brief Request with #MRQ_PWR_LIMIT + * + * |sub-command |payload | + * |----------------------------|---------------------------------| + * |CMD_PWR_LIMIT_QUERY_ABI | cmd_pwr_limit_query_abi_request | + * |CMD_PWR_LIMIT_SET | cmd_pwr_limit_set_request | + * |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_request | + * |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_request | + */ +struct mrq_pwr_limit_request { + uint32_t cmd; + union { + struct cmd_pwr_limit_query_abi_request pwr_limit_query_abi_req; + struct cmd_pwr_limit_set_request pwr_limit_set_req; + struct cmd_pwr_limit_get_request pwr_limit_get_req; + struct cmd_pwr_limit_curr_cap_request pwr_limit_curr_cap_req; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** + * @brief Response to MRQ_PWR_LIMIT + * + * |sub-command |payload | + * |----------------------------|---------------------------------| + * |CMD_PWR_LIMIT_QUERY_ABI | - | + * |CMD_PWR_LIMIT_SET | - | + * |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_response | + * |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_response | + */ +struct mrq_pwr_limit_response { + union { + struct cmd_pwr_limit_get_response pwr_limit_get_rsp; + struct cmd_pwr_limit_curr_cap_response pwr_limit_curr_cap_rsp; + } BPMP_UNION_ANON; +} BPMP_ABI_PACKED; + +/** @} PwrLimit */ +/** @endcond bpmp_th500 */ + + +/** + * @ingroup MRQ_Codes + * @def MRQ_GEARS + * @brief Get thresholds for NDIV offset switching + * + * * Platforms: TH500 onwards + * @cond bpmp_th500 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_gears_response + * @addtogroup Gears + * @{ + */ + +/** + * @brief Response to #MRQ_GEARS + * + * Used by the sender of an #MRQ_GEARS message to request thresholds + * for NDIV offset switching. + * + * The mrq_gears_response::ncpu array defines four thresholds in units + * of number of online CPUS to be used for choosing between five different + * NDIV offset settings for CCPLEX cluster NAFLLs + * + * 1. If number of online CPUs < ncpu[0] use offset0 + * 2. If number of online CPUs < ncpu[1] use offset1 + * 3. If number of online CPUs < ncpu[2] use offset2 + * 4. If number of online CPUs < ncpu[3] use offset3 + * 5. If number of online CPUs >= ncpu[3] disable offsetting + * + * For TH500 mrq_gears_response::ncpu array has four valid entries. + * + * mrq_response::err is + * * 0: gears defined and response data valid + * * -#BPMP_ENODEV: MRQ is not supported by BPMP-FW + * * -#BPMP_EACCES: Operation not permitted for the MRQ master + * * -#BPMP_ENAVAIL: NDIV offsetting is disabled + */ +struct mrq_gears_response { + /** @brief number of online CPUs for each gear */ + uint32_t ncpu[16]; +} BPMP_ABI_PACKED; + +/** @} Gears */ +/** @endcond bpmp_th500 */ /** * @addtogroup Error_Codes @@ -3047,12 +3953,18 @@ struct mrq_ec_response { #define BPMP_ENOSYS 38 /** @brief Invalid slot */ #define BPMP_EBADSLT 57 +/** @brief Invalid message */ +#define BPMP_EBADMSG 77 +/** @brief Operation not supported */ +#define BPMP_EOPNOTSUPP 95 +/** @brief Targeted resource not available */ +#define BPMP_ENAVAIL 119 /** @brief Not supported */ #define BPMP_ENOTSUP 134 /** @brief No such device or address */ #define BPMP_ENXIO 140 -/** @} */ +/** @} Error_Codes */ #if defined(BPMP_ABI_CHECKS) #include "bpmp_abi_checks.h" diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h index f2604e99af09..5842e38bb288 100644 --- a/include/soc/tegra/bpmp.h +++ b/include/soc/tegra/bpmp.h @@ -6,6 +6,7 @@ #ifndef __SOC_TEGRA_BPMP_H #define __SOC_TEGRA_BPMP_H +#include <linux/iosys-map.h> #include <linux/mailbox_client.h> #include <linux/pm_domain.h> #include <linux/reset-controller.h> @@ -36,10 +37,22 @@ struct tegra_bpmp_mb_data { u8 data[MSG_DATA_MIN_SZ]; } __packed; +#define tegra_bpmp_mb_read(dst, mb, size) \ + iosys_map_memcpy_from(dst, mb, offsetof(struct tegra_bpmp_mb_data, data), size) + +#define tegra_bpmp_mb_write(mb, src, size) \ + iosys_map_memcpy_to(mb, offsetof(struct tegra_bpmp_mb_data, data), src, size) + +#define tegra_bpmp_mb_read_field(mb, field) \ + iosys_map_rd_field(mb, 0, struct tegra_bpmp_mb_data, field) + +#define tegra_bpmp_mb_write_field(mb, field, value) \ + iosys_map_wr_field(mb, 0, struct tegra_bpmp_mb_data, field, value) + struct tegra_bpmp_channel { struct tegra_bpmp *bpmp; - struct tegra_bpmp_mb_data *ib; - struct tegra_bpmp_mb_data *ob; + struct iosys_map ib; + struct iosys_map ob; struct completion completion; struct tegra_ivc *ivc; unsigned int index; diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h index 88ce0bf439ad..be45d5f5adea 100644 --- a/include/soc/tegra/ivc.h +++ b/include/soc/tegra/ivc.h @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/iosys-map.h> #include <linux/types.h> struct tegra_ivc_header; @@ -16,7 +17,7 @@ struct tegra_ivc { struct device *peer; struct { - struct tegra_ivc_header *channel; + struct iosys_map map; unsigned int position; dma_addr_t phys; } rx, tx; @@ -37,7 +38,7 @@ struct tegra_ivc { * * Returns a pointer to the frame, or an error encoded pointer. */ -void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc); +int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, struct iosys_map *map); /** * tegra_ivc_read_advance - Advance the read queue @@ -57,7 +58,7 @@ int tegra_ivc_read_advance(struct tegra_ivc *ivc); * * Returns a pointer to the frame, or an error encoded pointer. */ -void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc); +int tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc, struct iosys_map *map); /** * tegra_ivc_write_advance - Advance the write queue @@ -92,8 +93,8 @@ void tegra_ivc_reset(struct tegra_ivc *ivc); size_t tegra_ivc_align(size_t size); unsigned tegra_ivc_total_queue_size(unsigned queue_size); -int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx, - dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys, +int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, const struct iosys_map *rx, + dma_addr_t rx_phys, const struct iosys_map *tx, dma_addr_t tx_phys, unsigned int num_frames, size_t frame_size, void (*notify)(struct tegra_ivc *ivc, void *data), void *data); |