Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

Pull soundwire updates from Vinod Koul:

 - cleanup and conversion for soundwire sysfs groups

 - intel support for ace2x bits, auxdevice pm improvements

 - qcom multi link device support

* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
  soundwire: intel_ace2.x: add support for DOAISE property
  soundwire: intel_ace2.x: add support for DODSE property
  soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
  soundwire: intel_ace2x: cleanup DOAIS/DODS settings
  soundwire: intel_ace2x: simplify check_wake()
  soundwire: intel_ace2x: fix wakeup handling
  soundwire: intel_init: resume all devices on exit.
  soundwire: intel: export intel_resume_child_device
  soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
  ASoC: SOF: Intel: hda: disable SoundWire interrupt later
  soundwire: qcom: allow multi-link on newer devices
  soundwire: intel_ace2x: use legacy formula for intel_alh_id
  soundwire: reconcile dp0_prop and dpn_prop
  soundwire: intel_ace2x: set the clock source
  soundwire: intel_ace2.x: power-up first before setting SYNCPRD
  soundwire: intel_ace2x: move and extend clock selection
  soundwire: intel: add support for MeteorLake additional clocks
  soundwire: intel: add more values for SYNCPRD
  soundwire: bus: extend base clock checks to 96 MHz
  soundwire: cadence: show the bus frequency and frame shape
  ...

3 files changed, 14 insertions, 18 deletions

diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 66f814b63a43..13e96d8b7423 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -235,6 +235,7 @@ enum sdw_clk_stop_mode {
  * @BRA_flow_controlled: Slave implementation results in an OK_NotReady
  * response
  * @simple_ch_prep_sm: If channel prepare sequence is required
+ * @ch_prep_timeout: Port-specific timeout value, in milliseconds
  * @imp_def_interrupts: If set, each bit corresponds to support for
  * implementation-defined interrupts
  *
@@ -249,6 +250,7 @@ struct sdw_dp0_prop {
 	u32 *words;
 	bool BRA_flow_controlled;
 	bool simple_ch_prep_sm;
+	u32 ch_prep_timeout;
 	bool imp_def_interrupts;
 };
 
@@ -543,21 +545,6 @@ enum sdw_reg_bank {
 };
 
 /**
- * struct sdw_bus_conf: Bus configuration
- *
- * @clk_freq: Clock frequency, in Hz
- * @num_rows: Number of rows in frame
- * @num_cols: Number of columns in frame
- * @bank: Next register bank
- */
-struct sdw_bus_conf {
-	unsigned int clk_freq;
-	unsigned int num_rows;
-	unsigned int num_cols;
-	unsigned int bank;
-};
-
-/**
  * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel
  *
  * @num: Port number
@@ -899,6 +886,7 @@ struct sdw_master_ops {
  * @port_ops: Master port callback ops
  * @params: Current bus parameters
  * @prop: Master properties
+ * @vendor_specific_prop: pointer to non-standard properties
  * @m_rt_list: List of Master instance of all stream(s) running on Bus. This
  * is used to compute and program bus bandwidth, clock, frame shape,
  * transport and port parameters
@@ -933,6 +921,7 @@ struct sdw_bus {
 	const struct sdw_master_port_ops *port_ops;
 	struct sdw_bus_params params;
 	struct sdw_master_prop prop;
+	void *vendor_specific_prop;
 	struct list_head m_rt_list;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index 00bb22d96ae5..8e78417156e3 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -22,6 +22,7 @@
 /* LCAP */
 #define SDW_SHIM_LCAP			0x0
 #define SDW_SHIM_LCAP_LCOUNT_MASK	GENMASK(2, 0)
+#define SDW_SHIM_LCAP_MLCS_MASK		BIT(8)
 
 /* LCTL */
 #define SDW_SHIM_LCTL			0x4
@@ -30,12 +31,18 @@
 #define SDW_SHIM_LCTL_SPA_MASK		GENMASK(3, 0)
 #define SDW_SHIM_LCTL_CPA		BIT(8)
 #define SDW_SHIM_LCTL_CPA_MASK		GENMASK(11, 8)
+#define SDW_SHIM_LCTL_MLCS_MASK		GENMASK(29, 27)
+#define SDW_SHIM_MLCS_XTAL_CLK		0x0
+#define SDW_SHIM_MLCS_CARDINAL_CLK	0x1
+#define SDW_SHIM_MLCS_AUDIO_PLL_CLK	0x2
 
 /* SYNC */
 #define SDW_SHIM_SYNC			0xC
 
-#define SDW_SHIM_SYNC_SYNCPRD_VAL_24	(24000 / SDW_CADENCE_GSYNC_KHZ - 1)
-#define SDW_SHIM_SYNC_SYNCPRD_VAL_38_4	(38400 / SDW_CADENCE_GSYNC_KHZ - 1)
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_24		(24000 / SDW_CADENCE_GSYNC_KHZ - 1)
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_24_576	(24576 / SDW_CADENCE_GSYNC_KHZ - 1)
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_38_4		(38400 / SDW_CADENCE_GSYNC_KHZ - 1)
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_96		(96000 / SDW_CADENCE_GSYNC_KHZ - 1)
 #define SDW_SHIM_SYNC_SYNCPRD		GENMASK(14, 0)
 #define SDW_SHIM_SYNC_SYNCCPU		BIT(15)
 #define SDW_SHIM_SYNC_CMDSYNC_MASK	GENMASK(19, 16)
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
index 138bec908c40..658b10fa5b20 100644
--- a/include/linux/soundwire/sdw_registers.h
+++ b/include/linux/soundwire/sdw_registers.h
@@ -13,7 +13,7 @@
 
 #define SDW_REG_NO_PAGE				0x00008000
 #define SDW_REG_OPTIONAL_PAGE			0x00010000
-#define SDW_REG_MAX				0x80000000
+#define SDW_REG_MAX				0x48000000
 
 #define SDW_DPN_SIZE				0x100
 #define SDW_BANK1_OFFSET			0x10